ISD SO-NB-G105 SO-NB-G85 SO-NB-P46 PV2R1-* - * -RAA-42/4290 PV2R2-* - * -RAA-41/4190 PV2R3-* - * -RAA-31/3190 PV2R4-* - * -RAA-30/3090

Similar documents
VANE PUMPS. Output Flow at 1200 r/min at No-Load U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols.

"PV11R" SERIES Fixed Displacement- Single PV11R10/PV11R20

"A" Series Variable Displacement Piston Pumps Single Pump, Pressure Compensator Type

50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination

50T,150T,250F SERIES Fixed Displacement-Single, Double, Combination 3

Hydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.

" " Series Variable Displacement Piston Pumps

" " Series Variable Displacement Piston Pumps

"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01

"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3

PRESSURE REDUCING AND RELIEVING VALVES

VARIABLE DISPLACEMENT PISTON PUMPS

Throttle Modules / Throttle and Check Modules

A Series Variable Displacement Piston Pumps

Restrictors / One Way Restrictors

ARL1 Series Piston Pumps. ARL1 Series Piston Pumps. Geometric Displacement. Maximum cm 3 /rev

Max. Operating Pressure Kgf/cm 2

4.2 FIXED DISPLACEMENT DOUBLE PUMP

PISTON PUMPS. A3H Series High Pressure Variable Displacement Piston Pumps. Features. A3H Series Variable Displacement Piston Pumps.

AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps. AR Series Variable Displacement Piston Pumps

PRESSURE REDUCING AND RELIEVING VALVES

Proportional Electro-Hydraulic Pilot Relief Valves

Pressure Reducing and Relieving Valves

Series Variable Displacement Piston Pump

UNLOADING RELIEF VALVES

Direct Operated Type Directional and Flow Control Valves

Series Proportional Electro-Hydraulic Controls

AR Series Variable Displacement Piston Pumps. [Comparison of AR16 with A16 ] A16,32 Design 188. AR16,22 Design 130. Ratio of Mass (AR16/A16) 74%

06 SERIES MODULAR VALVES. Pub. EC-1404

FLOW CONTROLS. Maximum Flow U.S.GPM Maximum Operating Pressure MPa (PSI) Graphic Symbols. Page. Valve Type.

SHUT-OFF TYPE SOLENOID OPERATED DIRECTIONAL VALVES DSPC/DSPG-01/03(1/8,

Max. Reversed Free Flow. Max. Operating. Pressure MPa (PSI) Fine Feed 20 (5.3) 14 (2030) 40 (10.6) ( ) 40 (10.6) (

Proportional Electro-Hydraulic Flow Control and Relief Valves

FIXED DISPLACEMENT VANE PUMPS

Variable Displacement Piston Pumps

A Series Variable Displacement Piston Pumps. A16 Type performance characteristics A16 Type Noise level characteristics.

Proportional Electro-Hydraulic Flow Control (and Check) Valves

EH SERIES PROPORTIONAL ELECTRO-HYDRAULIC CONTROL VALVES

EMulti Purpose Control Valves

5.2 MEDIUM HEAVY DUTY SERIES SIZE 3

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.

1.3 HIGH PRESSURE SERIES

10 SERIES MODULAR VALVES. Pub. EC-1405

High Pressure, High Flow Rate Modular Valves

E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts

MOTOR-PUMPS PAL PUMPS. M Series Electric Motors. M Series Electric Motors 212. PAL PUMPS & M Series Electric Motors. Maximum Operating Pressure MPa

10 SERIES MODULAR VALVES

Pilot Operated Flow Control Valves / Pilot Operated Flow Control and Check Valves

PROPORTIONAL ELECTRO-HYDRAULIC CONTOROLS

Flow Control Valves / Flow Control and Check Valves

Standard Hydraulic Power Units Power Packages

Graphic Symbol 100 L 140 G25. R -M V 4 4 G P E. Perm.* 2 Magnet. Differential Pressure P. Connection. R: BSP.F Thd. O: Not Fitted.

Vickers. Vane Pumps. V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications.

Vickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93

"A" Series Piston Pumps Variable Displacement-Single Pumps Electro-Hydraulic Proportional Pressure & Flow Control. Type

Proportional Electro-Hydraulic Relieving and Reducing Valves

5.1 MEDIUM HEAVY DUTY SERIES SIZE 2

Discharge rate* 2 L/min MPa (DE10-1) 37.8 MPa (DE10-7)

Proportional Electro-Hydraulic Directional and Flow Control Valves

Vent Connection. Pres. Adj. Range BT BG * ~ BG F- B T -03 P -V -32.

Double Pump Operating Specifications

Vickers. Vane Pumps. Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment.

Pressure Relief Valves

Poppet Type Directional Valves

03 SERIES. General Information Mounting Surface : ISO 4401-AC-05-4-A, CETOP-5, NFPA-DO2 Up to 25 MPa (3630 PSI), 70 L /min (18.5 U.S.

Vickers. Piston Motors. Inline Piston Motors. Fixed and Variable Displacement. Revised 5/99 691

Piston Pumps PVH Variable Displacement

Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor

3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353)

vane pumps Vane Pumps Prices Shaft and Cartridge Prices

VHO Vane Pumps ENGINEERING DATA. Single, Double, Triple & Thru Drive Available Multiple Displacements Low Cost Alternative Proven Performance

PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS

EManually Operated Directional Valves

Variable Displacement Piston Pumps for Industrial Applications

Modular Valves. Ratings

Max. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting

IFP VTM42 POWER STEERING PUMPS

Kawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor

Vickers. Service Data. Vane Pumps. Thru Drive Vane Type Pump (F3) 25VT*(M) **A(M)2 ** * 22 * I-3154-S. Rev. 2/98

Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor

PowrFlow PVX Vane Pumps

Reducing Valve/Reducing Valve with Check Valve

Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMC 045. Staffa Fixed Displacement Hydraulic Motor

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.

Catalog PowrFlowTM PVX Vane Pumps

Variable displacement axial piston pumps,

PVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE

PROPORTIONAL ELECTRO-HYDRAULIC CONTROLS

Solenoid Controlled Relief Valves

Mobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement

RELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled

RV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL

VARIABLE-DISPLACEMENT VANE PUMP (HVP-VB1 SERIES)

E SERIES. Proportional Electro-Hydraulic Relief Valves. Specification. Model Number Designation. Attachment Mounting Bolts

Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer

PVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS

HYDRAULIC CYLINDER CJT TYPE SERIES HYDRAULIC CYLINDER CJT SERIES HYDRAULIC CYLINDER WITH PROXIMITY SWITH C6 SERIES COMPACT CYLINDER J-1

Vane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)

Pressure Control Valves

Vane motor high performance hydraulic series M5B - M5BS - M5BF

Transcription:

Spare Parts List PVR-* - * -RAA-4/4 PVR-* - * -RAA-4/4 PVR-* - * -RAA-/ PVR4-* - * -RAA-/ 4 5 4 6 8 8 6 5 4 Y Section Y-Y Y 6 5 Section - 8 Cartridge Kits Model Numbers PVR-6- * -RAA-4 * PVR-8- * -RAA-4 * PVR-- * -RAA-4 * PVR-- * -RAA-4 * PVR-4- * -RAA-4 * PVR-- * -RAA-4 * PVR-- * -RAA-4 * PVR-- * -RAA-4 * PVR-5- * -RAA-4 * PVR-- * -RAA-4 * 4 Cartridge Kit Numbers Model Numbers 4 Cartridge Kit Numbers CPVR-6-R-4 CPVR-8-R-4 CPVR--R-4 CPVR--R-4 CPVR-4-R-4 CPVR--R-4 CPVR--R-4 CPVR--R-4 CPVR-5-R-4 CPVR--R-4 PVR-4- * -RAA-4 * PVR-4- * -RAA-4 * PVR-5- * -RAA-4 * PVR-5- * -RAA-4 * PVR-65- * -RAA-4 * PVR-6- * -RAA- * PVR-4- * -RAA- * PVR-6- * -RAA- * PVR4-6- * -RAA- * PVR4-5- * -RAA- * PVR4-84- * -RAA- * PVR4-- * -RAA- * PVR4-- * -RAA- * CPVR-4-R-4 CPVR-4-R-4 CPVR-5-R-4 CPVR-5-R-4 CPVR-65-R-4 CPVR-6-R- CPVR-4-R- CPVR-6-R- CPVR4-6-R- CPVR4-5-R- CPVR4-84-R- CPVR4--R- CPVR4--R- Seals & Bearings Item 4 5 6 ) Name of Parts Oil Seal Back Up Ring Back Up Ring Bearing Part Numbers PVR PVR PVR PVR4 ISD 6 4 8 SO-NB-G SO-NB-G SO-NB-G ISD 4 8 SO-NB-G5 SO-NB-G85 SO-NB-P46 4 65 Note: Item Nos. and 4 (o-rings) and 5 and 6 (back up rings) are included in cartridge kit. ) For pumps for phosphate ester type hydraulic fluids different part Nos. are used. Please contact us. When ordering seals, please specify the kit number from the table right. ISD 5 55 SO-NB-G5 SO-NB-G5 SO-NB-A 6 List of Seal Kits Pump Model Numbers PVR- * - * -RAA-4/4 PVR- * - * -RAA-4/4 PVR- * - * -RAA-/ PVR4- * - * -RAA-/ ISD 45 68 SO-NB-G45 SO-NB-P8 SO-NB-PA SO-NA-G SO-NA-G SO-BE-G SO-BB-G 6 Seal Kit Numbers KS-PVR- KS-PVR- KS-PVR- KS-PVR4- Qty. 6 "PVR" Series Single Vane Pumps

VANE PUMPS "PVR4A" Series Single Vane Pumps These high pressure, high performance pumps have been developed to meet space-saving requirements. These pumps are a very compact version of the PVR4, a vane pump series that has proven to exhibit outstanding low noise characteristics. B Graphic Symbol Specifications Model Numbers PVR4A-8 PVR4A-6 PVR4A- Geometric Displacement cm /rev (cu.in./rev) 8.5 ( 8.45) 6.6(.) 4.4(.86) Petroleum Base Oils Anti-Wear. () R & O 4 () Max. Operating Anti-Wear Water- Glycols 6 () Water Containing Fluids Water Glycols () MPa (PSI) Water in Oil Emulsions () Synthetic Fluids Phosphate Esters 4 (). For the brands of anti-wear type water-glycols, see the item of "Hydraulic Fluids" on page.. If PVR4A- is used at speed above r/min, the suction pressure is limited to kpa ( in. Hg.).. If phosphate ester or water containing fluids are used, the maximum speed is limited to r/min. Output Flow & Input Power Refer to Pages & Shaft Speed Range r/min Model Number ation F- PVR4A -8 -L -R A A - -* Max. () () Min. "PVR4A" Series Single Vane Pumps Special Seals Series Number Nominal Displacement cm /rev of Shaft Rotation Discharge Position Suction Position Number s F: For phosphate ester type fluids (Omit if not required) PVR4A 8, 6, L: Foot F: Flange. Available to supply pump with anti-clockwise rotation. Consult Yuken for details. R: Clockwise (Viewed from Shaft End) A: Upwards A: Upwards. s:none... "JIS"...... Pipe Flange Kits Pipe flange kits are available. When ordering, specify the kit number from the table below. Refer to Pump Model Numbers PVR4A Name of Suction Discharge "JIS" F5-4-A- F5--A- Pipe Flange Kit Numbers Threaded Connection Socket Welding Butt Welding F5--A- "JIS" F5-4-B- F5--B- F5-4-B- F5--B- "JIS" F5-4-C- F5--C- F5-4-C- F5--C-. In case of using socket welding flanges, there is a case where the operating pressure should be set lower than the normal because of strength of the flanges. Therefore, please pay cautious attention to the operating pressure when the socket welding flanges are used.. As dimensions of the pipe flange mounting surface are conformed to SAE 4 Bolt Split Flange ( Series), pipe flanges conforming to the SAE s can be used. Notes: Special seals (Viton seals) are required when phosphate ester type fluids are used. (Prefix "F-" to the pipe flange kit number when ordering.) Details of the pipe flange kits are shown on page 84. "PVR4A" Series Single Vane Pumps

Flange Mtg.: PVR4A-* -F-RAA-/ Suction 6(.) Dia. R5(R.5) 66(6.54) 6.4 (4.8) Discharge 6(.4) Dia. R4(R.55) (.8) 8 (4.65) (.54) 6. (.5) Key Width.(.8).4(.6) 6. (.4) "C" Thd. "E" Deep 5. (.6) 6(.) "D" Thd. "F" Deep Position (.) 6. (5.) 6. (4.) 8.5(.54) (4.4) (5.) (.) 66.5 (.6) (.) Dia..5(.).(.48) (.) (.8) 5. 5.4 Dia.. 6.5 (5.) (4.8) A (8.) 8(.6) (.).5(.68) Dia. Through Places 48 (5.8) R6 (R.6) Approx. Mass... kg (88. lbs.) Model Numbers PVR4A- * -F-RAA- PVR4A- * -F-RAA- "C" Thd. M6 5/8- UNC "D" Thd. M /- UNC E (.4) (.8) Dimensions mm (Inches) F (.8) (.8) Foot Mtg.: PVR4A-* -L-RAA-/ DIMENSIONS IN MILLIMETRES (INCHES) A.5 (8.64).5 (4.) (.8).5(.68) Dia. Through 6(.) Dia. Spotface (.8) (.) 6. (.) (.6) 54 (5.6) (.) 45 (5.).5.5 (4.66) (4.66) 4 (.) Approx. Mass... kg ( lbs.) For other dimensions, refer to "Flange Mtg.". 8 "PVR4A" Series Single Vane Pumps

VANE PUMPS Measuring conditions Fluid viscosity : mm /s ( SSU) Measurement point : One metre (. ft.) horizontally away from pump head cover Back ground noise : db (A) B PVR4A-8 PVR4A- 5 65 r/min r/min 5 65 r/min r/min "PVR4A" Series Single Vane Pumps 55.5..5 4..5 MPa () () () (PSI) 55.5..5 4..5 MPa () () () (PSI) Typical Pump Characteristics at Viscosity mm /s ( SSU) [ISO VG Oils, C ( F)] PVR4A-8 L/min U.S.GPM L/min U.S.GPM kw HP r/min r/min r/min r/min.5..5 4..5 () ()() MPa (PSI) PVR4A-6 r/min r/min r/min r/min kw HP.5..5 4..5 MPa () ()() (PSI) "PVR4A" Series Single Vane Pumps

Typical Pump Characteristics at Viscosity mm /s ( SSU) [ISO VG Oils, C ( F)] U.S.GPM 5 PVR4A- L/min Spare Parts List r/min r/min r/min r/min kw.5..5 4..5 MPa () ()() (PSI) HP PVR4A-* - * -RAA-/ 4 5 5 8 6 6 Cartridge Kits Model Numbers 4 Cartridge Kit Numbers PVR4A-8- * -RAA- * PVR4A-6- * -RAA- * PVR4A-- * -RAA- * CPVR4A-8-R- CPVR4A-6-R- CPVR4A--R- Seals & Bearings Section - Item Name of Parts Part Numbers Qty. 8 5 Oil Seal Bearing Pump Model Numbers PVR4A-*-*-RAA-/ ISD 45 68 SO-NB-G SO-NB-A SO-NB-G 6 Note: ) Item Nos. and (o-rings) are included in cartridge kit. ) For pumps for phosphate ester type hydraulic fluids different part Nos. are used. Please contact us. When ordering seals, please specify the kit number from the table below. List of Seal Kits Seal Kit Numbers KS-PVR4A- "PVR4A" Series Single Vane Pumps