MIG/MAG- Welding torches ABIMIG 150 ABIMIG 150 T air cooled Technical data (EN 0 97-7): ABICOR BINZEL. The right welding torch for every job! Welding torches of the ABIMIG series feature eihter fixed or adjustable and changeable neck options. Different handle variants and trigger lengths are also available. These properties allow flexible adjustment of the torch to different welding positions and individual preferences. Welding torches of range ABIMIG 150, due to their functionality, are ideal for the welding of thin gauge metal. Rating: 10 A CO2 10 A Mixed Gases M 21 (DIN EN 9) 0% Duty Cycle Wire sizes: 0. - 1.0 Rated using power source with VDE standard volt/amp characteristic (U=1+0.05xl). When pulse welding, reduce rating by 5%. Type Version.00 m long.00 m long 5.00 m long Part no. Part no. Part no. ABIMIG 150 L Swan neck 50 bent, fixed, handle L 77.D001 77.D002 77.D00 ABIMIG 150 T L* Swan neck 5 bent, rotating, handle L 00.D1 00.D2 00.D ABIMIG MT 150 0 Machine torch neck, straight, fixed, handle tube 77.D010 77.D011 77.D012 ABIMIG MT 150 5 Machine torch neck 5 bent, fixed, handle tube 77.D01 77.D01 77.D015 *Attention! Due to the manifold possible variations of ABIMIG T in this table is shown only a preference torch. Different options are available according to the part list of this leaflet. Please state in your order verbally. Welding & cutting brought to the point.
20 1 1.1 12 10.1 11 90 91 100 18 52 101 18.1 200 102 ABIMIG Line 20 1 1. 8 10.2 11 90 91 15 100 M22x1.5 M10x1 101 1.5 8 10. 5 52 102 T 8 T 18 B A 18.1 Schnitt B B B Schnitt A A A 200 110 ABIMIG T-Line
120 1.1 11 0 10 11 12 1 5 5 58 59 0 1 Cable assembly ABIMIG Line + ABIMIG T-Line 20 1.2 8 9 90 100 1. 52 101 200 102 1.1 0 5 5 58 59 0 1 ABIMIG MT Subject to change without notice. Guarantee for Genuine BINZEL spares only.
Build group Torch Pos. Description Specifications Part no. 1.1 Swan neck ABIMIG 150 for contact tip BINZEL Pos. 90 77.D00 Swan neck ABIMIG 150 for contact tip HAUFE Pos. 91 77.D008 1.2 Swan neck ABIMIG MT 150 0 for contact tip BINZEL Pos. 90 77.D01 1. Swan neck ABIMIG MT 150 5 for contact tip BINZEL Pos. 90 77.D0 1. Swan neck ABIMIG 150 T 5 for contact tip BINZEL Pos. 90 00.D291 Swan neck ABIMIG 150 T8 5 for contact tip BINZEL Pos. 90 00.D2 Swan neck ABIMIG 150 TM 5 for contact tip BINZEL Pos. 90 00.D29 Swan neck ABIMIG 150 T8M 5 for contact tip BINZEL Pos. 90 00.D0 Swan neck ABIMIG 150 T 5 for contact tip HAUFE Pos. 91 00.D2 Swan neck ABIMIG 150 T8 5 for contact tip HAUFE Pos. 91 00.D9 Swan neck ABIMIG 150 TM 5 for contact tip HAUFE Pos. 91 00.D8 Swan neck ABIMIG 150 T8M 5 for contact tip HAUFE Pos. 91 00.D50 1.5 Swan neck ABIMIG 150 T K5 for contact tip BINZEL Pos. 90 00.D2 Swan neck ABIMIG 150 T8 K5 for contact tip BINZEL Pos. 90 00.D1 Swan neck ABIMIG 150 TM K5 for contact tip BINZEL Pos. 90 00.D7 Swan neck ABIMIG 150 T8M K5 for contact tip BINZEL Pos. 90 00.D5 Swan neck ABIMIG 150 T K5 for contact tip HAUFE Pos. 91 00.D51 Swan neck ABIMIG 150 T8 K5 for contact tip HAUFE Pos. 91 00.D5 Swan neck ABIMIG 150 TM K5 for contact tip HAUFE Pos. 91 00.D52 Swan neck ABIMIG 150 T8M K5 for contact tip HAUFE Pos. 91 00.D5 Counter nut M8x1 LH 10 pcs 00.D705 Spacer for metal jacket 10 pcs 00.D5 Spacer 10 pcs 00.D189 8 Cap nut M22 x1.5 00.D18 Handle Cable assembly 10.1 Handle L, cpl. for ABIMIG Line 1.D055 10.2 Handle L, cpl. for ABIMIG T-Line 1.D05 10. Handle S, cpl. for ABIMIG T-Line 1.D02 11 Cable support for handle L 00.D27 12 Intermediate piece 00.00 15 Swan neck mounting M22x1.5 with octagon junction 00.D299 Switch guard 00.D252 18 Trigger, long 185.D07 18.1 Trigger, short 185.D02 8 Handle tube AUT 1.D00 9 Cable support for BIKOX B 00.0100 0 BIKOX cable assembly B for.00 m 10.D02 BIKOX cable assembly B for.00 m 10.D0 BIKOX cable assembly B for 5.00 m 10.D0 1.1 Hexagonal nut M10x1 001.0009 5 Cable support spring dia. 21 00.D205 5 Cable support, machine side 500.D05 58 Connecting nut 500.021 59 Central adaptor plug KZ-2 501.000 0 Nut M10x1 10 pcs 501.0082 1 O-ring x1 20 pcs 15.0002
Build group Wear parts Pos. Description Specifications Part no. Tip holder //0 LH 10 pcs 00.D295 for contact tip BINZEL Pos. 90 Tip holder // LH 10 pcs 00.D70 for contact tip HAUFE Pos. 91 90 Contact tip, E-Cu Ø 0. 10 pcs 10.0008 Contact tip, E-Cu Ø 0.8 10 pcs 10.0059 Contact tip, E-Cu Ø 1.0 10 pcs 10.025 Contact tip, CuCrZr Ø 0. 10 pcs 10.0855 Contact tip, CuCrZr Ø 0.8 10 pcs 10.002 Contact tip, CuCrZr Ø 1.0 10 pcs 10.025 Contact tip, E-Cu Ø 0.8 for Aluminium wire 10 pcs 11.0002 Contact tip, E-Cu Ø 1.0 for Aluminium wire 10 pcs 11.0007 91 Contact tip, E-Cu Ø 0. 10 pcs 10.D010 Contact tip, E-Cu Ø 0.8 10 pcs 10.D011 Contact tip, E-Cu Ø 1.0 10 pcs 10.D012 100 Gas nozzle, NW12 plated 10 pcs 15.D001 101 Gas nozzle, NW12 plated, long 10 pcs 15.D00 102 Gas nozzle, NW plated, cylindrical 10 pcs 15.D00 Gas nozzle, NW12 bare, with prol. insulation 10 pcs 15.D205 110 Neck liner 1.5 for wire Ø 0.-1.0 for ABIMIG T-Line 122.D07 Neck liner 1. brass for ABIMIG T-Line 122.D00 for wire Ø 0.-1.0 120 Torch liner insulated 1./. brown with for.00 m 12.D002 collet for wire Ø 0.-0.8 for.00 m 12.D00 for 5.00 m 12.D00 Torch liner insulated 1.5/. black with for.00 m 12.D00 collet for wire Ø 0.8-1.0 for.00 m 12.D007 for 5.00 m 12.D008 10 Teflon liner 1.5/.0 blue with collet for.00 m 12.0005 and O-ring for wire Ø 0.-1.0 for.00 m 12.0008 for 5.00 m 12.0011 Carbon teflon liner 1.5/.0 with collet for.00 m 127.0002 and O-ring for wire Ø 0.-1.0 for.00 m 127.000 for 5.00 m 127.000 11 Collet for core liner with outer diameter.0 20 pcs 11.0001 12 O-ring.5x1.5 20 pcs 15.0008 1 Guide tube with outer diameter 5.0 up to 200 mm 129.xxxx for core liners up to outer diameter.0 200 Spanner for ABIMIG 191.D00 Standard-equipment
Explanation of Encoding ABIMIG - Torches ABIMIG 150 L Torch of series ABIMIG range 150 ABIMIG 150 T L Torch of series ABIMIG T range 150 ABIMIG - Machine torches ABIMIG MT 150 0 ABIMIG MT 150 5 } ABIMIG - Machine torch MT range 150 Swan necks T Neck exchange system; turnable and to be unfastened at any time T8 Neck exchange system; fixable in 8 positions and to be unfastened at any time TM as T; but with metal jacket T8M as T8; but with metal jacket K5 Swan neck short 5 bent Handles Handle L Handle S small handle medium handle Welding & cutting brought to the point. Alexander Binzel Schweisstechnik GmbH & Co. KG P.O. Box 10 01 5 D-51 Giessen Tel.: ++9 (0) 08 / 59-0 Fax: ++9 (0) 08 / 59-19 Internet: www.binzel-abicor.com