Basic Dakar Hopi a modular system Motion mechanisms for chairs and sofas KINTEC-SOLUTION technic to relax
Basic Seating mechanism without footrest. Dakar Motion mechanism with footrest nearly to the floor. Hopi Motion mechanism with floor-away footrest. Design example with motion mechanism Hopi. Diversity From an individual chair to a sofa Basic, Dakar, Hopi every motion mechanism can be realized with arms to the floor or swiveling, with open or closed armrest-solutions. Loveseats and sofas share the same components. Explore the capability of the KINTEC modular system. Individuality Sit Relax Lay Modular system offers flexibility in design, assembly and logistic. 2 3
Basic Dakar Dakar with extended footrest. Straight backrest with a headrest-hinge. Tapered backrest with a headrest-hinge. Backrest-adaptor for individual design Chassis Backrest Perfection Comfortable of the detail All chassis are available either with a plastic-seat-plate or with a combination of plastic-seat-plate and three NOSAGsprings. The given diversity fills every desire and enables a comfortable reclineposition of 30. The VARIO 40-kit enlarges the seating depth by 40 mm and in addition ensures a recline angle of 42. The specific VARIO 40-backrest already comes with the extra 40 mm seating depth. Hopi Hopi with extended footrest. Backrest with 5 pivot point hinge-joints. Backrest with height adjustable headrest (with three height-steps). VARIO 40 For more seating depth and 42 recline-angle. Plastic-seat-plate Combination of plastic-seat-plate and three NOSAG-springs. Footrest-support-kit, ideal for XL chair solutions. VARIO 40-kit VARIO 40-backrest with two adjustable heights. This backrest is also available without the VARIO 40. VARIO 40-backrest with three adjustable heights and three different backrest-inclinations. 4 5
Chair cross-bar for fixed armrests to the floor with an upholstery width of 535 mm. Alternatively upholstery width of 585 mm. Chair cross-bar with a swivel-adaptor 0 for swivel chairs with 535 mm upholstery width. Alternatively upholstery width of 585 mm. Chair cross-bar for aluminum armrests. Cross rails For chairs and sofa Armrests Diversity for individual design The large variety of chair cross-bars with the upholstery width of 535 mm and 585 mm as well as the sofa cross-rails offer enormous amount of flexibility. The specific click-system enables the fast attachment of the upholstered chassis onto the cross-rails. This customer friendly device simplifies the assembly and the logistic. The attractive collection of contemporary aluminum armrests ensures the whole variety from one source. The Fiorentino- Design with the armrest Split and Flavio offers an extravagant collection. Specific swivel-adaptor with chair cross-bar for the upholstery of short armrests. This is for the upholstery width of 535 mm and with the release system: LockFront. Milano armrest Cross-rail for love-seats with integrated click-system.70 mm wide (two chassis of 585 mm upholstery width each). Cross-rail for 3-seater with integrated click-system.755 mm wide (three chassis of 585 mm upholstery width each). Split armrest Flavio armrest 6 7
FreeGlider The 500, 600, 700 and 800 N gas-spring enables the infinitely recline position just by applying body force to the backrest. Release button With 500 N gas-spring ultra light. The release button is available with a 500, 750 and.000 mm long bowden cable. LockFront Lever release with disc and gas-spring. LockFront Lever release without disc and gas-spring. LockFront Pull-strap release and gas-spring. Release systems Manual Backrest positioning The manual release of gas-spring technology offers perfect functionality and long lasting product satisfaction. Whether the infinitely backrest positioning via body force with the FreeGlider, the actuating via release button or LockFront all manual release systems guarantee a high level of user friendliness. - LockFront for lever and pull-strap release are available for the upholstery width 535 and 585 mm. - LockFront gas-springs are available in 500, 600 and 800 N. LockFront return spring pulls the lever into its original position. Synchro Recline limitation The application of spacers is possible with all gas-springs. The recline decrease from 42 to 30 is reached by using three spacers. By applying the synchro-kit, back and footrest are moving at the same time synchronical. Synchro-kit 8 9
One-motorized synchro control (with synchro-kit). Enables simultaneous back and footrest movement. SMPS floor-transformer SMPS wall-transformer KS Prolock-accumulator This accumulator only gets activated by the red fuse and therefore is permitted world wide without the UL-certification. Actuating systems Motorized Control and circuitry technology User friendly and flexible A perfect assortment of motorized solutions is rounding up the capability of KINTEC motion mechanisms. Aimed at our customer applications the one and two-motorized release systems meet all technical expectations. For controlling the one and two motorized actuating systems there are alternatively toggle built-in switches or hand-controls available. When equipping with a KS Prolock-accumulator both circuitries come with charging stations. One-motorized footrest control (with seat-back linkage bar). Backrest moves automatically slightly through the chassis movement. Two-motorized. Separate control for back and footrest. Toggle switch for SMPS floor-transformer. Toggle switch with accumulator-charging-station. Hand control with or without accumulator-charging-station. 0
5-Star base ø 700 or 528 mm for tapered swivel-column. - Aluminum, high gloss polished - powder coated silver-grey RAL 9006 - powder coated black dull 8-Star base ø 720 mm for tapered swivel-column. - Aluminum, high gloss polished - Fiorentino design Plate disc ø 690 or 625 mm for cylindrical swivel-column. - Stainless steel high gloss polished - Stainless steel brushed Free standing chair Ottoman Individual base construction Customer specific elements Base variations Diversity The base of a relax chair strongly influences the product design. A complex line of product of high quality base-solutions in attractive finishes is available and ensures stability. Beyond the range of motion mechanisms a large line of accessories for the design of the individual chair and ottoman rounds up the product diversity. Use the range of base-variety for your individual product design. We gladly assist you competent based on our long experience in the market field. And create together with you customized product solutions. Lentil base ø 690 or 625 mm for tapered swivel-column. - Stainless steel high gloss polished - Stainless steel brushed - powder coated silver-grey RAL 9006 - powder coated black dull Wooden lentil base ø 625 or 470 mm for tapered swivel-column. A black support for the swivel-column is separate available. Measurement table for base variations Swivel-column tapered Swivel-cover cylindrical Upholstery height Height of swivel-column Lentil base Star base From appr. 420 mm 2.5 mm 46 mm 23 mm From appr. 450 mm 42.5 mm 76 mm 53 mm From appr. 480 mm 72.5 mm 06 mm 76 mm Swivel-column cylindrical Swivel-cover cylindrical Upholstery height Height of swivel-column Metal flat base From appr. 420 mm 2.5 mm 76 mm From appr. 450 mm 42.5 mm 06 mm From appr. 480 mm 72.5 mm 36 mm Swivel-column tapered for the following height: 2.5; 42.5 and 72.5 mm. Swivel-column cylindrical for the following height: 2.5; 42.5 and 72.5 mm. Anti-twist device is required for motorized versions with SMPS. 2 Swivel-cover. Not for swivel column for SPMS use. 3 Swivel-column cylindrical for SPMS use Swivel-cover cylindrical Upholstery height Height of swivel-column Metal flat base From appr. 420 mm 2.5 mm 35 mm From appr. 450 mm 42.5 mm 53 mm From appr. 480 mm 72.5 mm 53 mm
Measurement and recline angles Assembly- Disassambly tools Applied load Basis Basic Sit 00 Relax 20 Required torque specifications. The tools are meant for the motion mechanisms Basic, Dakar and Hopi. Assembly instructions with torque specifications Backrest 25 Nm Gas-spring actuating-kit 25 Nm Lever device LockFront 7 Nm Leg-spring-device 4 Nm Synchro-kit 25 Nm Cross-bar 40 Nm Swivel-column metal flat disc 40 Nm Applied load Headrest hinge 20 N Backrest 700 N Chassis.300 N Footrest 50 N Actuating synchro 0 N Actuating Lever 0 N Disassembly tools To disconnect the swivel-column from the swivel-adaptor or the cross-bar To disconnect the swivel-column from chair-base Sit 00 Relax 09 Lay 30 or Lay 42 Dakar Dakar Sit 00 Relax 09 Lay 30 or Lay 42 Hopi Hopi This combination is based on a swivel-column of 42.5 mm. Due to this an average upholstery seating-height of 450 mm is reached. 4 5