Igniter, BMS & Valve Parts Directory Phone: (03) 32-9 Email: sales@combustex.com Web: www.combustex.com
Combustex is ready to provide you with the spare parts you need to keep your Pilot Pro Igniters, Combustex BMS Controllers and Series 0 Valves running smoothly and efficiently. These are the same parts we use to manufacture the original ignition assemblies and BMS Controllers, so you can be sure you are getting replacement units of the highest quality. Reduce downtime by taking advantage of our pre-packed igniter service kits, available for all of our Pilot Pro Igniter models. Complete with all of the most commonly required items after one year of service, these kits ensure that you have the right parts on hand when you need them. Alternatively, use this handy directory to find the individual parts and part numbers required to service all of your Combustex products. To request a quote, pricing information or to order, contact our offices by phone or email. For igniter service kits, specify the Pilot Pro Igniter model and quantity required. For individual parts, indicate the part number, size or length (if applicable) and quantity. Please note that parts listed for Pilot Pro Igniters are the same high quality parts used in the former Can-lite Igniters. To identify the parts you need for your Can-lite Igniter, simply find the corresponding Pilot Pro model number.
BMS 2000 Series B9.3 Compliant Burner Management System 2 3 For the BMS-2000 Front Door with Keypad BMS-KB 2 Front Circuit Board BMS-03A-5.03L 3 Ribbon Cable BMS-RCC Back Circuit Board BMS-03B For the BMS-2500 Front Door with Keypad BMS-KBW 2 Front Circuit Board BMS-03A-5.03L 3 Ribbon Cable BMS-RCCW Back Circuit Board BMS-03BW BMS 2000 SERIES
Series 0 C/I Standard Safety Shutoff Valve 25 2 32 20 32 2 2 2 DETAIL B 29 END VIEW 3 3 9 3 3 2 2 2 22 23 2 33 5 SECTION A-A 3 2 B 2 Valve Body 0-00- 2 Bonnet 0-002- 3 Spring Case (Standard Model) 0-003- Cage 0-005- 5 Valve Plug 0-00- Valve Stem 0-0-2 Diaphragm 0-0- Valve Spring - 3- PSI (Standard Model) 0-0- 9 Valve Spring - -30 PSI (Standard Model) 0-0-2 2 Stem Seal Bushing 0-0- Stem Seal Retainer Ring 0-09- 2 Diaphragm Guide 0-022-2 Diaphragm Spring Plate 0-025-2 Shaft Spring Plate 0-02- Position Indicator Shaft (Standard Model) 0-029- Indicator Shaft Spring 0-030- Indicator Cap 0-03- Spring Adjustment Plate 0-039- 9 Diaphragm Washer 0-02-2 20 Shaft Lock Nut NHJF-03-CS 2 3 Inner & Lower Cage Seal #020 O020-0H 22 Upper Cage Seal #02 O02-0H 23 Valve Seat Seal # O-90H 2 Diaphragm Guide Spacer 0-05- 25 Diaphragm Guide Outer Seal # O-0H 2 3 Stem Packing Seal #203 O2030H 2 Body Seal #030 O030-0H 2 Packing Snap Ring SRI-025 29 2 Body Bolt BHC-03-2250-BM 3 Spring Adjustment Jam Nut NHJF-0500-CS 3 Spring Adjustment Set Screw BSQOF-0500-2000-CS 32 3 Lock Washer WL-03-CS 33 Plug Retainer Pin PG-009-0500-3 3 Spring Case Bolt BHC-0250-00-CS 35 Specification Tag 0-02- 3 Specification Tag Drive Screw PD-025-025-CS SERIES 0 STANDARD
Series 0 C/I Proof of Closure Safety Shutoff Valve 2 32 25 2 DETAIL B 32 END VIEW 2 20 2 2 2 2 29 3 2 23 2 22 33 3 0 3 B 39 30 35 2 22 5 Valve Body 0-00- 2 Bonnet 0-002- 3 Spring Case (P.O.C. Model) 0-003-2 Cage 0-005- 5 Valve Plug 0-00- Valve Stem 0-0-2 Diaphragm 0-0- Inner Valve Spring - 3- PSI (P.O.C. Model) 0-0- 9 Inner Valve Spring - -30 PSI (P.O.C. Model) 0-0-2 2 Stem Seal Bushing 0-0- Stem Seal Retainer Ring 0-09- 2 Diaphragm Guide 0-022-2 Diaphragm Spring Plate 0-025-2 Shaft Spring Plate 0-02- POC Switch Actuator Shaft 0-033- Indicator Shaft Spring 0-030- Indicator Cap 0-03- Outer Valve Spring - 3- PSI (P.O.C. Model) 0-0- 9 Outer Valve Spring - -30 PSI (P.O.C. Model) 0-0-2 20 Diaphragm Washer 0-02-2 2 Shaft Lock Nut NHJF-03-CS 22 3 Inner & Lower Cage Seal #020 O020-0H 23 Upper Cage Seal #02 O02-0H 2 Valve Seat Seal # O-90H 25 Diaphragm Guide Outer Seat Seal # O-0H 2 3 Stem Packing Seal #203 O203-0H 2 Body Seal #030 O030-0H 2 3 Packing Snap Ring SRI-025 29 2 Body Bolt BHC-03-2250-BM 30 POC Position Switch 0-032- 32 3 Lock Washer WL-03-CS 33 Plug Retainer Pin PG-009-0500-3 3 Spring Case Bolt BHC-0250-00-CS 35 2 POC Position Switch Retainer Screw SR-2x5-03-30 3 Specification Tag 0-02-2 3 Specification Tag Drive Screw PD-025-025-CS 3 POC Switch Cover Plate 0-00- 39 POC Switch Cover Bolt BHC-0250-050-CS 0 POC Switch Cover Gasket 0-0- SERIES 0 P.O.C. SECTION A-A
Pilot Pro 900 Ignition System with Pilot Tip and Flame Sensor 5 3 SEE WIRING DIAGRAM (P. ) FOR CONNECTIONS TO IGNITION MODULE 2 9 2 USER-SUPPLIED /2 PILOT PIPE TO BE SCHED. 0, NOT TO EXCEED 30 INSTALL SPARK ROD TIP / FROM WALL OF PILOT HOOD Cl., Div. I & II Enclosure Base 3 2 Killark HK2D Cap 32 3 Hub /2 x /2 F/F 3 Spark Rod 5 /2 Ground Clamp 0 Burn Nozzle Serial Number Tag 0 2 /2 NPT Close Nipple 9 Ignition Module (Flame Rod) 90 #-2 x 5/ Screw (not shown) 5 Ignition Wire (SA) 2 Electrode Mounting Bracket /2 Electrical Aluminum Seal Ground Wire 99 Air / Fuel Mixer Orifice 35 Air / Fuel Mixer Venturi Body 3 PILOT PRO 900 Indicates parts included in service kit.
The Combustex Pilot Pro 00 Pilot Burner Assembly with Ignition & Flame Failure Monitor 2 2 23 3 2 DETAIL C 5,.5, 2, 3,, 5, (FEET) or CUSTOM 2 25 2 22 20 DETAIL C 9 2 9 Top Body 2 Upper Gas Valve Assembly 5 3 Lower Gas Valve Assembly Igniter Push Button & Body Assembly 5 Piezo Igniter Assembly Ignition Lead Wire Assembly 200-( through ) Pilot Jet 5 Pilot Valve 9-9 Pilot Gauge Output Gauge Supply Gauge 9 2 Flame Arrestor 0 Bottom Body /-20 x / Socket Cap Screws 2 / x 0.09 SS Tubing 3-( through ) Venturi 2 Thermocouple 5 ( ) 3 Thermocouple ( ) Thermocouple ( ) 2 Thermocouple ( ) Burn Tip 9 A 9 2 Burn Tip Dowel Pin 90 20 Thermocouple Set Screw 9 2 Venturi Set Screw 0 PILOT PRO 00 22 / NPT Street Elbow 9 23 Lower Valve Gasket 95 SECTION VIEW BOTTOM VIEW 2 Upper Valve Gasket 9 25 Lock Nut 9-2 2 Ceramic Retainer Spring 9 A 2 Pilot Valve O-ring 99 Part number suffix indicates insertion length. E.g. 200-2 = 2 ft. insertion length. Indicates parts included in service kit. ( ) Please specify thermocouple size required at time of order.
Pilot Pro 550 Ignition System with Pilot Tip and Flame Sensor 3 9 20 2 2 9 5 2.000.000 Bottom Body 0 2 Flame Arrestor 0 3 Venturi Pilot Jet 0 5 / x 0.09 SS Tubing 3-( through ) Burn Tip 9A Ceramic Retainer Spring 9A 2 Burn Tip Dowel Pin 90 9 Venturi Set Screw 0 Top Body 05A 550 Ignition Lead Wire Assembly 20-( through ) 2 /-20 x -/ Socket Cap Screws 2 2 /2 Close Nipple 550 Ignition Module 90 Pilot Valve O-ring 99 Cl., Div I & II Enclosure Base 3 Killark HK2D Cap 32 2-2 x 5/ Screw 5 PILOT PRO 550 DETAIL A 9 Serial Number Tag 0 SECTION VIEW BOTTOM VIEW DETAIL A 20 /2 Aluminum Electrical Seal Part number suffix indicates insertion length. E.g. 200-2 = 2 ft. insertion length. Indicates parts included in service kit.
Pilot Pro 500 Ignition System with Pilot Tip and Flame Sensor 9 2 2 5 3 9 20 D C DETAIL C 2 A B Type K Thermocouple 0 2 Flange - Instrument Connection 09 3 Flange - 2 NPT Female 3 Flange - 3 NPT Female (optional) Flange Gasket 5 /2 Aluminum Seal 2 /2 x 2 Aluminum Nipple * Ignition Lead Wire Assembly 2005 3 Gas Pipe - 3/ (SS Pipe) 23 9 Conduit - 3/ (SS Pipe) 23 Slide Protector 2002 Pilot Head Assembly (includes A through D) 2003 A Pilot Head 500 2 B #-32 x / Thermocouple Set Screw - SS 2 C Deflector Plate 2 D #-2 x 3/ Deflector Plate Set Screw - SS 299 2 Spark Plug 29 3/ Elbow Tube Fitting 30 Cl., Div. I & II Enclosure Base 3 Enclosure Cap 32 PILOT PRO 500 * Ignition Module 200 DETAIL C 5/ Lock Washer - Zinc 00 5/ - x Bolt - Zinc 0 9 5/ - Wing Nut - Zinc 02 20 5/ ID External Snap Ring 25 2 2-2 x 5/ Screw 5 Indicates parts included in service kit. * As of 0/202 part #s 2005 and 200 from the Pilot Pro 500 Igniter will replace part #s 200 and 200 (ignition lead wire assembly and ignition module) from the former Canlite 50 Igniter.
CONTACT Phone: 03.32.9 Fax: 03.3.0 Email: mail@combustex.com Web: www.combustex.com Toll Free: -55-22-252 59 5th Ave. Red Deer, AB TP X5 CANADA 20-20 Canalta Controls Ltd. All rights reserved. Unauthorized reproduction in whole or in part is prohibited. 0 20