CATALOGUE
Inflex Hydraulic Engines & Machinery Spare Parts Trdg llc P.O.Box 392755, Dubai - UAE, Tel: 04 3394677, Fax: 04 3394388 Email: info@inflexhydraulics.com, www.inflexhydraulics.com www.stainlesssteelhosesdubai.com Assembly and Supply of: Hydraulic Hoses and Fittings Stainless steel corrugated hoses and fittings Stainless steel expansion bellows Steel tubes, tube fittings & tube clamps Suction discharge, Air & Chemical hoses etc. Pressure guages, dowty seals, ball valves, quick release couplings etc.
STAINLESS STEEL EXPANSION BELLOW Expansion control in pipelines, ducting and vessels which carry hot or cold fluids or which are exposed to the large variations in ambient temperature is a major problem confronting designers. As the metal temperature increases or decreases, the dimensional change due to thermal expansion or contraction will enduce excessive stresses in the piping, ducting or vessel and large forces will be transmitted to anchors and connected equipment. For controlling such stresses and bring them to allowable values for the materials used in piping, ducting, and vessels, several different methods are available, such as the use of pipebends and expansion loops. However the most modern designers prefer the use of metallic bellows expansion joints, because they require less space than bends and loops and because their inherent flexibility enables them to absorb movements in more than one direction, thereby permitting greater freedom in design. Furthermore, expansion joints prove to be more economical than other devices, so their use results in lower initial costs for piping and construction work, operating costs being reduced as well. BELLOW ELEMENT. The flexible element of an expansion joint, consisting of one or more convolutions obtained by the hydro-forming or mechanical forming according to the diameter of the shell of a material sutiable for the required specification. Bellows are welded to tube ends or flanges to constitute different models of expansion joint assemblies. INNER SLEEVE. A device which is also referred to as liner, telescopic sleeve etc, to avoid the head losses or turbulence and streamline the flow through bellows. It is required if the fluid flowing through the bellows is at very high velocity. ENDS. The ends of an expansion joint, which may be either equipped with flanges or suitably beveled for welding to adjacent equipment or piping etc. They are in compliance with applicable standards in force. Bellows offered by us are designed based on E.J.M.A guidelines and our stanadard range comprises Of Bellows from 2inch to 72inch NB in single and multiply construction for different working temperatures, pres sures and movements. The Cyclic life of a Bellow depends upon the extent to which It is stressed under optimum working Pressure, Temperature, Axial and Lateral deflection. To achieve a long life, a Bellow must be operated well within the maximum design parameters for both deflection and pressure.
AXIAL MOVEMENT. The amount to motion parallel to the axis in a straight guided pipline. LATERAL MOVEMENT. Axil Movement A single plane deflection form the centre line of one end of the bellows but that end is keeping to remain parallel with the other end. ANGULAR MOTION. The ends are displaced at angle 0 to each other rather then remaining parallel. Lateral Movement TYPES OF EXPANSION JOINTS. Some of the most common expansion joints being used for different applications are listed below. Angular Motion AXIAL JOINTS. Axil Joints This expansion joint is simply a bellows element with pipe ends or flanges connections.it is manufactured from Single and multiply elements. These bellows are suitable only for axial movements & also absorb limited lateral displacements. Tide Axial Expansion Joints also have one bellows except that their length is restrained tie rods. UNIVERSAL EXPANSION JOINTS. Universal Expansion Joints The universal expansion joint consists of two bellows separated by pipe section or spool. The primary purpose of this arrangement is to have a unit which will accept large amounts of lateral deflection. The amount of lateral deflection they can accept is a function of the amount of angulation.these joints have no restrains to resist pressure thrust like the axial. For given bellow element the amount of lateral deflection capability is increased or decreased by simply changing the length of the center spool. Bellow expansion joints standard or custom designed are recommended for the following applications. * Vacuum Steam * Petrochemical * Hot Water * Utilities * Solar * Environmental
Blocks Now available with us SAE O - RING FLANGE CLAMPS AND BLOCK FLANGES. We stock common range of SAE O - ring split clamps and Block flange for Hydraulic Application. * SAE O - ring clamps and Blocks are available in different range and size. * SAE O - ring Split Clamps 3000 PSI (61 code) 6000 PSI (62 code) Code 61 and Code 62 SAE O ring Flange Blocks with NPT thread. Code 61 and Code 62 SAE O ring Flange Blocks to Weld Socket. Code 61 and Code 62 SAE Flat face flange Blocks with NPT thread. Code 61 and Code 62 SAE Flat face flange Blocks to Weld Socket. Any other configurations are available on request.
STAINLESS STEEL CORRUGATED FLEXIBLE HOSES. HOSE Stainless Steel Corrugated flexible hoses are offered from 6mm (1/4 ) to 300mm(12 ). The annular corrugated hose body provides the flexibility and pressure tight core of the assembly. BRAID Unbraided corrugated hoses tend to elongate when pressurized above a certain level. To restrain this, an external layer of stainless steel wire braiding is provided on the hose. Braiding prevents longitudinal expansion of corrugated hose and thus increases the internal pressure strengthen of the hose many fold.braiding is highly flexible and exactly follows the movements of the hose. To increase the pressure ratings further, two or even three layers of braiding are provided. Unless specified, braiding in high tensile stainless steel AISI 304 wire, will be supplied. ASSEMBLIES Stainless Steel hose assemblies are engineered to perfection in flexibility, strength and reliability. Hose assembly can be supplied with any types of end connections in various types of materials. The end connections are tig welded to hose. ADVANTAGES OF FLEXIBLE METAL HOSES. (-270 deg C to 700 deg C) in the piping system. dampens vibration and similar equipments. difficult locations. APPLICATIONS
Catalogue Inflex Hydraulic Engines & Machinery Spare Parts Trdg llc. Inflex Hydraulic Engines & P.O.Box Machinery 392755, Spare Dubai - Parts UAE Trdg llc Tel: 04 3394677, Fax: 04 3394388 04-3394677 Email: info@inflexhydraulics.com www.inflexhydraulics.com Fax: 04-3394388 www.stainlesssteelhosesdubai.com Email: info@inflexhydraulics.com HYDRAULIC HOSES & CONNECTORS Uncontrolled distribution document We reserve the right to make, without notice, changes to any drawing or data shown in this document because of technical development or other reason. Please note that all the shown compatibilities and conformities are geometrical ones, they do not necessarily imply performances compatibilites and conformities.
2001 INDEX Page No. 1. HOSES.... 1-10 2. FERRULES... 11-1 2 3. HOSE CONNECTORS... 13-27 4. ADAPTORS.... 28 5. STEEL TUBING.... 29 6. ACCESSORIES.... 30 7. OTHER PRODUCTS.... 31 8. TECHNICAL INFORMATION... 32-36
HYDRAULIC HOSES 2001 1 HR1T HOSES SAE 100R1AT-HOSE NOM SIZE DN HOSE MIN ACTUAL WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR MM KG/MTR 03 3/16 5 4.8 12.7 12,000 827 3,000 207 89 0.210 04 1/4 6 6.3 15.9 11,000 758 2,750 190 102 0.300 05 5/16 8 7.9 17.5 10,000 690 2,500 172 114 0.350 06 3/8 10 9.5 19.8 9,000 620 2,250 155 127 0.430 08 1/2 12 12.7 23 8,000 552 2,000 138 178 0.530 10 5/8 16 15.9 26.2 6,000 414 1,500 103 203 0.620 12 3/4 20 19.1 30.2 5,000 345 1,250 86 241 0.760 16 1 25 25.4 38.1 4,000 276 1,000 69 305 1.130 20 1 1/4 32 31.8 46 2,500 172 625 43 419 1.420 24 1 1/2 40 38.1 52.4 2,000 138 500 34 508 1.770 32 2 50 50.8 66.7 1,500 103 375 26 635 2.460 Application : Construction : High pressure Hydraulic systems using mineral oils, glycols and acqueous oils Tube - Oil resistant synthetic rubber Reinforcement-1 high tensile steel braid Cover - synthetic rubber with high abrasion ozone and weather resistance Temperature range : - 40º C to +110º C HR2T HOSES SAE 100R2AT-HOSE NOM SIZE DN HOSE MIN ACTUAL WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR MM KG/MTR Application : Construction : 03 3/16 5 4.8 15.9 20,000 1,380 5,000 345 89 0.360 04 1/4 6 6.3 17.5 20,000 1,380 5,000 345 102 0.470 05 5/16 8 7.9 19.1 17,000 1,172 4,250 293 114 0.510 06 3/8 10 9.5 21.4 16,000 1,103 4,000 276 127 0.630 08 1/2 12 12.7 24.6 14,000 965 3,500 241 178 0.735 10 5/8 16 15.9 27.8 11,000 758 2,750 190 203 0.850 12 3/4 20 19.1 31.8 9,000 620 2,250 155 241 1.060 16 1 25 25.4 39.7 8,000 552 2,000 138 305 1.515 20 1 1/4 32 31.8 50.8 6,500 448 1,625 112 419 2.350 24 1 1/2 40 38.1 57.2 5,000 345 1,250 86 508 2.700 32 2 50 50.8 69.8 4,500 310 1,125 78 635 3.345 High pressure Hydraulic systems using mineral oils, glycols and acqueous emulsion oils Tube - Oil resistant synthetic rubber Reinforcement-2 high tensile steel braid Cover - synthetic rubber with high abrasion ozone and weather resistance Temperature range : - 40º C to +110º C HYDRAULIC HOSES 1
HYDRAULIC HOSES 2001 SAE 100R1AT- DIN20022 1SN HOSE HR1T NOM SIZE DN HOSES HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR Application : Construction : 03 3/16 5 4.8 12 16,665 1,150 14,500 1000 3,625 250 90 0.190 04 1/4 6 6.3 14 14,500 1,000 13,050 900 3,260 225 100 0.240 05 5/16 8 8.0 15 13,050 900 12,325 850 3,120 215 115 0.280 06 3/8 10 9.5 17.5 11,600 800 10,440 720 2,610 180 130 0.360 08 1/2 12 12.7 21 9,860 680 9,280 640 2,320 160 180 0.450 10 5/8 16 16.0 24 8,700 600 7,540 520 1,885 130 200 0.510 12 3/4 20 19.0 28 7,250 500 6,090 420 1,525 105 240 0.650 16 1 25 25.4 36 5,220 360 5,075 350 1,275 88 300 0.960 20 1 1/4 32 31.8 43.5 5,075 350 3,625 250 915 63 420 1.250 24 1 1/2 40 38.1 50 4,060 280 2,900 200 725 50 500 1.600 32 2 50 50.8 63.5 3,625 250 2,320 160 580 40 630 2.200 High pressure hydraulic systems using mineral oils, glycols and acqueous emulsion oils. Tube - Oil resistant synthetic rubber Reinforcement-1 high tensile steel braid Cover - synthetic rubber with high abrasion, ozone and weather resistance Temperature range : - 40º C to +110º C Special Characteristic : The impulse performance is higher than DIN-SAE specs., allowing improved and long lasting operating performances with good flexibility. SAE 100R2AT- DIN20022 2SN HOSE HR2T NOM SIZE DN HOSES HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR 03 3/16 5 4.8 13.7 29,000 2,000 23,925 1650 6,020 415 90 0.320 04 1/4 6 6.3 15.5 25,375 1,750 23,200 1600 5,800 400 100 0.370 05 5/16 8 8.0 16.5 21,460 1,480 20,300 1400 5,075 350 115 0.412 06 3/8 10 9.5 19.5 20,300 1,400 19,140 1320 4,785 330 130 0.530 08 1/2 12 12.7 22.5 16,965 1,170 15,950 1100 3,990 275 180 0.640 10 5/8 16 16.0 25.5 14,790 1,020 14,500 1000 3,625 250 200 0.770 12 3/4 20 19.0 29.5 13,050 900 12,325 850 3,120 215 240 0.960 16 1 25 25.4 38 9,715 670 9,425 650 2,390 165 300 1.350 20 1 1/4 32 31.8 48 8,700 600 7,250 500 1,815 125 420 2.050 24 1 1/2 40 38.1 55 7,250 500 5,220 360 1,305 90 500 2.511 32 2 50 50.8 67 6,090 420 4,640 320 1,160 80 630 3.160 Application : Construction : High pressure Hydraulic systems using mineral oils glycols and acqueous oils Tube - Oil resistant synthetic rubber Reinforcement-2 high tensile steel braid Cover - synthetic rubber with high abrasion ozone and weather resistance Temperature range : - 40º C to +110º C Special Characteristic : The impulse performance is higher than DIN-SAE spec., allowing improved and long lasting operating performance with good flexibility HYDRAULIC HOSES 2
HYDRAULIC HOSES 2001 HR5 HOSES SAE 100R5 - HOSE NOM SIZE DASH HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR Application : Construction : 03 3/16 04 4.8 13.2 14,500 1,000 12,000 827 3,000 207 76 0.210 04 1/4 05 6.3 15.0 13,340 920 12,000 827 3,000 207 86 0.265 05 5/16 06 8.0 17.0 11,600 800 9,000 621 2,250 155 102 0.335 07 13/32 07 10.5 19.5 10,875 750 8,000 552 2,000 138 117 0.390 08 1/2 08 12.7 23.5 8,265 570 7,000 483 1,750 121 140 0.525 10 5/8 10 16.0 27.5 7,250 500 6,000 414 1,500 103 165 0.650 14 7/8 16 22.0 31.5 4,785 330 3,200 221 800 55 183 0.660 18 1 1/8 20 28.0 38.0 5,220 360 2,500 172 625 43 229 0.910 22 1 3/8 24 35.0 44.5 4,640 320 2,000 138 500 34 267 1.000 29 1 13/16 32 46.0 56.4 3,625 250 1,400 97 350 24 337 1.480 High pressure Hydraulic systems using mineral oils, glycols and acqueous emulsion oils Tube - Oil resistant synthetic rubber Reinforcement-1 textile braid, 1 steel braid Cover - a textile braid embedded with synthetic rubber Temperature range : - 40º C to +125º C Special Characteristic : The hose conforms to SAE 100R5 spec. and the construction makes the hose particularly suitable for tough operating conditions. HR6 HOSES SAE 100R6-HOSE NOM SIZE DASH HOSE SPEC BURST WORKING MIN BEND WEIGHT ID OD PRESSURE PRESSURE RADIUS APPROX MM MM P PSI BAR S PSI BAR P MM KG/MTR 04 1/4 4 6.3 12.5 1,600 110 400 28 64 0.150 05 5/16 5 8.0 14.0 1,600 110 400 28 76 0.165 06 3/8 6 9.5 16.0 1,600 110 400 28 76 0.200 08 1/2 8 12.7 19.8 1,600 110 400 28 102 0.260 10 5/8 10 16.0 23.0 1,400 97 350 24 127 0.320 12 3/4 12 19.0 26.0 1,400 97 350 24 140 0.380 16 1 16 25.4 32.0 1,400 97 350 24 152 0.465 Application : Construction : Low pressure hydraulic systems using mineral oils, glycols and acqueous emulsion oils. Tube - Oil resistant synthetic rubber Reinforcement-1 high tensile textile braid Cover - synthetic rubber with high abrasion, ozone and weather resistance Temperature range : - 40º C to +110º C Special Characteristic : The hose conforms to SAE 100R6, the special reinforcement used makes the hose particularly reliable when operating at high pressure and high temperature. HYDRAULIC HOSES 3
HYDRAULIC HOSES 2001 HR7 HOSES SAE 100R7 - HOSE NOM SIZE DASH HOSE MIN ACTUAL WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR MM KG/MTR 03 3/16 03 4.8 9.7 12,000 827 3,000 207 20 0.065 04 1/4 04 6.3 12.1 11,000 758 2,750 190 32 0.098 05 5/16 05 8.0 14.0 10,000 689 2,500 172 45 0.118 06 3/8 06 9.5 16.1 9,000 620 2,250 155 51 0.144 08 1/2 08 12.7 19.4 8,000 552 2,000 138 77 0.211 12 3/4 12 19.0 27 5,000 345 1,250 86 127 0.259 (Twin hoses also available) Construction : Core - superpolyamide Reinforcement-1 synthetic fibre braid Cover - polyurethane Temperature range : - 40º C to +121º C Special Characteristic : Small outside diameter, wide fluid compatibility and lightweight. HR8 HOSES SAE 100R8-HOSE NOM SIZE DASH HOSE SPEC BURST WORKING MIN BEND WEIGHT ID OD PRESSURE PRESSURE RADIUS APPROX MM MM P PSI BAR S PSI BAR P MM KG/MTR 04 1/4 04 6.3 15.8 20,000 1,379 5,000 345 51 0.176 06 3/8 06 9.5 19.35 16,000 1,103 4,000 276 64 0.220 08 1/2 08 12.7 22.5 14,000 965 3,500 241 102 0.283 Construction : Core - superpolyamide Reinforcement-2 synthetic fibre braids Cover - polyurethane Temperature range : - 40º C to +121º C Special Characteristic : Lightweight and compact, wide fluid compatibility HYDRAULIC HOSES 4
HYDRAULIC HOSES 2001 SINGLE WIRE BRAID THERMOPLASTIC HOSE HTP1 NOM SIZE DASH HOSES HOSE MIN ACTUAL WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR MM KG/MTR 03 3/16 03 4.75 9.40 20,000 1,379 5,000 345 75 0.100 04 1/4 04 6.35 11.68 17,000 1,172 4,250 293 100 0.185 06 3/8 06 9.53 15.75 13,000 896 3,250 224 125 0.240 08 1/2 08 12.70 18.29 11,000 760 2,750 190 180 0.370 Construction : Core - polyester elastomer Reinforcement-1 high tensile steel braid Cover - polyester elastomer Temperature range : - 40º C to +121º C Special Characteristic : The polyester elastomer core and cover gives excellent resistance to almost all paint solvents DOUBLE WIRE BRAID THERMOPLASTIC HOSE HTP2 NOM SIZE DASH HOSES HOSE MIN ACTUAL WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR MM KG/MTR 04 1/4 04 6.35 13.72 26,000 1,792 6,500 448 100 0.300 06 3/8 06 9.53 17.02 20,000 1,380 5,000 345 125 0.450 08 1/2 08 12.70 21.21 16,000 1,104 4,000 276 180 0.610 Construction : Core - polyester elastomer Reinforcement- 2 high tensile steel braids Cover - polyester elastomer Temperature range : - 40º C to +121º C Special Characteristic : The polyester elastomer core and cover gives excellent resistance to almost all paint solvents HYDRAULIC HOSES 5
HYDRAULIC HOSES 2001 HR9R HOSES SAE 100R9R - DIN 20023 4SP HOSE NOM SIZE DN HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR 04 1/4 6 6.3 17.8 34,800 2,400 26,100 1,800 6,525 450 150 0.620 06 3/8 10 9.5 21.4 30,450 2,100 25,810 1,780 6,450 445 180 0.770 08 1/2 12 12.7 24.6 27,550 1,900 24,070 1,660 6,020 415 230 0.920 10 5/8 16 16.0 28.5 23,200 1,600 20,300 1,400 5,075 350 250 1.120 12 3/4 20 19.0 32.0 23,000 1,600 20,300 1,400 5,075 350 300 1.560 16 1 25 25.4 39.7 21,750 1,500 16,240 1,120 4,060 280 340 2.060 20 1 1/4 32 31.8 50.8 18,125 1,250 12,180 840 3,045 210 457 3.310 24 1 1/2 40 38.1 57.0 14,500 1,000 10,730 740 2,685 185 559 3.810 32 2 50 50.8 70.6 14,500 1,000 9,570 660 2,395 165 660 5.350 Application : Construction : Very high pressure hydraulic systems using hydraulic oils Tube - Oil resistant synthetic rubber Reinforcement-4 high tensile steel spirals Cover - synthetic rubber with high temperature, ozone and abrasion resistance Temperature range : - 40º C to +121º C HR13 HOSES SAE 100R13 HOSE NOM SIZE DN HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR 16 1 25 25.4 39.2 23,925 1,650 20,000 1,379 5,000 345 305 2.280 20 1 1/4 32 32.0 49.8 21,025 1,450 20,000 1,379 5,000 345 419 3.710 24 1 1/2 40 38.0 57.3 21,750 1,500 20,000 1,379 5,000 345 508 4.960 32 2 50 50.8 71.0 20,300 1,400 20,000 1,379 5,000 345 635 7.360 Application : Construction : Very high pressure hydraulic systems using hydraulic oils Tube - Oil resistant synthetic rubber Reinforcement-4 high tensile steel spirals upto 1" bore, and six spirals from 1 1/4" bore and above Cover - synthetic rubber with high temperature, ozone and abrasion resistance Temperature range : - 40º C to +121º C HYDRAULIC HOSES 6
HYDRAULIC HOSES 2001 H4SH HOSES DIN 20023 4SH HOSE NOM SIZE DN HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR 16 1 25 25.4 38.0 25,375 1,750 22,040 1,520 5,510 380 340 2.080 20 1 1/4 32 31.8 45.2 20,300 1,400 18,850 1,300 4,715 325 460 2.510 24 1 1/2 40 38.1 53.5 17,400 1,200 16,820 1,160 4,205 290 560 3.420 32 2 50 50.8 68.0 15,950 1,110 14,500 1,000 3,625 250 700 4.730 Application : Construction : Very high pressure hydraulic systems using hydraulic oils Tube - Oil resistant synthetic rubber Reinforcement-4 high tensile steel spirals Cover - synthetic rubber with high temperature, ozone and abrasion resistance Temperature range : - 40º C to +121º C HRWB HOSES WATER BLAST HOSE NOM SIZE DN HOSE SPEC BURST WORKING MIN BEND WEIGHT ID OD PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR MM KG/MTR 04 1/4 6 6.35 17.80 36,250 2,500 14,500 1,000 150 0.60 06 3/8 10 9.50 23.80 36,250 2,500 14,500 1,000 200 1.14 08 1/2 12 12.70 23.10 36,250 2,500 14,500 1,000 240 1.34 12 3/4 20 19.05 32.20 36,250 2,500 14,500 1,000 305 2.51 Construction : Tube - water and Oil resistant synthetic rubber Reinforcement-4 high tensile steel spirals Cover - synthetic rubber with high temperature, ozone and abrasion resistance Temperature range : -40º C to +100º C HYDRAULIC HOSES 7
HYDRAULIC HOSES 2001 HSST HOSES STAINLESS STEEL TEFLON HOSE BORE SIZE internal DIA MM OUTSIDE DIA MM MAX. WORKING MIN BURST MIN BEND WEIGHT PRESSURE AT 20 C PRESSURE AT 20 C RADIUS APPROX in mm MIN MAX P MIN MAX PSI BAR PSI BAR MM KG/MTR 02 1/8 3.5 3.4 3.70 5.9 6.3 4,205 290 12,615 870 22 0.065 03 3/16 4.5 4.4 4.75 6.9 7.3 3,845 265 11,530 795 40 0.080 04 1/4 6.3 6.0 6.50 8.3 8.7 3,480 240 10,440 720 60 0.093 05 5/16 8.0 7.5 8.00 9.8 10.3 2,900 200 8,700 600 70 0.110 06 3/8 9.5 9.1 9.60 11.5 12.0 2,755 190 8,265 570 80 0.124 08 1/2 12.7 11.9 12.80 14.5 15.4 2,175 150 6,525 450 110 0.207 10 5/8 16.0 15.0 16.00 17.8 18.9 1,595 110 4,785 330 150 0.255 12 3/4 19.0 18.0 19.20 21.0 22.3 1,160 80 3,480 240 200 0.315 16 1 25.4 24.0 25.40 27.6 28.7 800 55 2,400 165 300 0.430 Construction The hose has a smooth innercore of extruded white Teflon with a single 304 stainless steel wire braid reinforcement Temperature range -54º C to +232º C for continuous service -73º C to +260º C for intermittent service P.T.F.E hose has outstanding properties which are unmatched by any other flexible hose. It is possible to greatly reduce (or completely eliminate) maintenance and replacement costs which occur with conventional hoses used in extremely adverse conditions on various industrial applications. Within its working temperature range P. T.F.E. is completely inert to most known chemicals including alcohols, ehtylene glycol, concentrated acids, oils and fuels. P.T.F.E. hose has been tested and recommended for such aggressive acids, gases and solvents as nitrogen, hydrogen, ammonia, freons, butane, propane, chlorine, benzene, toluene, xylene, carbon tetrachloride, trichlorethylene, esters, ketones, hot fuming nitric, sulphuric and hydrochloric acid, concenrated sodium hydroxide, ammonia hydroxide and steam. Exceptions are few and comprise molten alkali metals and elementary flourine at elevated temperatures and pressures. P.T.F.E. will not cause contamination and can be handled with complete safety within its working temperature li mits. HR12 HOSES SAE 100 R12 HOSE NOM SIZE DN HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR 06 3/8 10 9.5 20.0 23,200 1,600 16,000 1,103 4,000 276 127 0.620 08 1/2 12 12.7 23.8 19,575 1,350 16,000 1,103 4,000 276 178 0.800 12 3/4 20 19.0 30.7 20,300 1,400 16,000 1,103 4,000 276 241 1.220 16 1 25 25.4 38.0 21,025 1,450 16,000 1,103 4,000 276 305 2.050 20 1 1/4 32 31.8 47.0 17,400 1,200 12,000 827 3,000 207 419 2.8100 24 1 1/2 40 38.1 53.5 11,600 800 10,000 690 2,500 172 508 3.320 32 2 50 50.8 66.7 11,600 800 10,000 690 2,500 172 635 4.620 Application : Construction : Very high pressure hydraulic systems using hydraulic oils Tube - Oil resistant synthetic rubber Reinforcement-4 high tensile steel spirals Cover - synthetic rubber with high temperature, ozone and abrasion resistance Temperature range : - 40º C to +121º C Special Characteristic : The hose exceeds SAE 100R12 spec., particularly on the impulse and burst pressures. HYDRAULIC HOSES 8
HYDRAULIC HOSES 2001 SINGLE WIRE BRAID JETWASH HOSE R1A-SH NOM SIZE DIN HOSES HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR 04 1/4 6 6.3 16.0 14,500 1,000 13,050 900 3,335 230 100 0.320 05 5/16 8 8.0 17.5 12,835 885 12,325 850 3,045 210 114 0.345 06 3/8 10 9.5 20.0 11,385 785 10,440 720 3,045 210 127 0.445 08 1/2 12 12.7 21.0 9,860 680 9,280 640 2,320 160 178 0.540 Construction : Tube - Oil resistant synthetic rubber Reinforcement-1 high tensile steel braid Cover - synthetic rubber with high abrasion, ozone and weather resistance Temperature range : - 40º C to +150º C DOUBLE WIRE BRAID JETWASH HOSE R2A-SH NOM SIZE DASH HOSES HOSE MIN ACTUAL SPEC BURST WORKING MIN BEND WEIGHT ID OD BURST PRESSURE PRESSURE PRESSURE RADIUS APPROX MM MM PSI BAR PSI BAR PSI BAR MM KG/MTR 05 5/16 8 8.0 19.0 21,315 1,470 20,300 1400 5,800 400 114 0.510 06 3/8 10 9.5 21.5 19,575 1,350 19,140 1320 5,800 400 127 0.630 08 1/2 12 12.7 24.5 16,675 1,150 15,950 1100 4,060 280 178 0.775 Construction : Tube - Oil resistant synthetic rubber Reinforcement-2 high tensile steel braid Cover - synthetic rubber with high abrasion, ozone and weather resistance Temperature range : - 40º C to +150º C HYDRAULIC HOSES 9
HYDRAULIC HOSES 2001 SINGLE WIRE BRAID STAINLESS STEEL CONVOLUTED HOSE HSPF1 HOSES NOMINAL ID MAX HOSE OD MIN BEND RADIUS MAX. WORKING MIN BURST WEIGHT DIAMETER STATIC FLEXING PRESSURE AT 20º C PRESSURE AT 20º C APPROX MM IN MM IN P MM MM BAR PSI BAR PSI KG/MTR 04 6.2 1/4 11 0.433 25 85 120 1740 480 6960 0.153 06 10.3 3/8 15.5 0.610 38 140 85 1233 340 4930 0.190 08 12.2 1/2 18 0.709 45 140 75 1088 300 4350 0.208 10 16.2 5/8 23 0.906 58 160 80 1160 320 4640 0.370 12 20.2 3/4 28 1.102 70 170 64 928 256 3712 0.502 16 25.4 1 33.5 1.319 85 190 50 725 200 2900 0.620 20 34.3 1 1/4 42.5 1.673 105 260 40 580 160 2320 0.902 24 40.1 1 1/2 51 2.008 130 300 35 508 140 2030 1.170 32 50.3 2 62 2.441 160 320 30 435 120 1740 1.555 40 65.7 2 1/2 83 3.268 180 410 24 348 96 1392 2.010 48 80.3 3 97 3.819 200 450 18 261 48 1044 2.125 64 100.8 4 119 4.685 290 560 16 232 64 928 2.889 80 125.4 5 152.5 6.004 325 710 14 203 56 812 4.880 96 150.8 6 178 7.008 380 815 10 145 40 580 5.875 128 197 8 228 8.976 500 1015 8 116 32 464 9.267 160 250.4 10 282 11.102 620 1270 7.5 109 30 435 14.700 192 300.2 12 340 13.386 725 1525 6 87 24 348 21.850 DOUBLE WIRE BRAID STAINLESS STEEL CONVOLUTED HOSE HSPF2 HOSES NOMINAL ID MAX HOSE OD MIN BEND RADIUS MAX. WORKING MIN BURST WEIGHT DIAMETER STATIC FLEXING PRESSURE AT 20º C PRESSURE AT 20º C APPROX MM IN MM IN P MM MM BAR PSI BAR PSI KG/MTR 04 6.2 1/4 11.5 0.453 25 85 192 2784 768 11136 0.24 06 10.3 3/8 16.25 0.640 38 140 136 1972 544 7888 0.286 08 12.2 1/2 18.5 0.728 45 140 120 1740 480 6960 0.32 10 16.2 5/8 24 0.945 58 160 128 1856 512 7424 0.584 12 20.2 3/4 29.25 1.152 70 170 103 1494 412 5976 0.732 16 25.4 1 34.6 1.362 85 190 80 1160 320 4640 0.9 20 34.3 1 1/4 43.9 1.728 105 260 64 928 256 3712 1.278 24 40.1 1 1/2 52.3 2.059 130 300 56 812 224 3248 1.7 32 50.3 2 63.5 2.500 160 320 48 696 192 2784 2.24 40 65.7 2 1/2 84.2 3.315 180 410 39 566 156 2264 2.98 48 80.3 3 98.2 3.866 200 450 29 421 116 1684 3.18 64 100.8 4 121 4.764 290 560 26 377 104 1508 4.355 80 125.4 5 154.6 6.087 325 710 23 334 92 1336 7.165 96 150.8 6 180 7.087 380 815 16 232 64 928 8.48 128 197 8 230.5 9.075 500 1015 13 189 52 756 13.486 160 250.4 10 283.6 11.165 620 1270 12 174 48 696 21.94 192 300.2 12 341.6 13.449 725 1525 9.6 139 38.4 557 33.5 HYDRAULIC HOSES 10
HOSE CONNECTORS 2001 FERRULES 1 WIRE FERRULES DN mm SIZE Inch D L HSN1 O3 5 4.8 03 3/16" 19 26 O4 6 6.3 04 1/4" 20 30.5 O5 8 7.9 05 5/16" 22 30.5 O6 10 9.5 06 3/8" 24 31.5 O8 12 12.7 08 1/2" 28.5 34 10 16 15.9 10 5/8" 32 37 12 20 19.1 12 3/4" 36 42.5 16 25 25.4 16 1" 43 50 20 32 31.8 20 1 1/4" 53 59 2 WIRE FERRULES DN mm SIZE Inch D L HSN2 O4 6 6.3 04 1/4" 22 30.5 O5 8 7.9 05 5/16" 24 30.5 O6 10 9.5 06 3/8" 25.5 31.5 O8 12 12.7 08 1/2" 30 34 10 16 15.9 10 5/8" 34 37 12 20 19.1 12 3/4" 38 42.5 16 25 25.4 16 1" 46 50 R7 FERRULES DN mm SIZE Inch D L HSP1 O3 5 4.8 03 3/16" 14 27 O4 6 6.3 04 1/4" 17 29 O5 8 7.9 05 5/16" 19 30 O6 10 9.5 06 3/8" 21 31 O8 12 12.7 08 1/2" 25.5 34 10 16 15.9 10 5/8" 28.5 36 12 20 19.1 12 3/4" 32 42 16 25 25.4 16 1" 40 50 HOSE CONNECTORS 11
HOSE CONNECTORS 2001 4 WIRE FERRULES DN mm SIZE Inch D L HMS O4 6 6.3 04 1/4" 22 30 O6 10 9.5 06 3/8" 25.5 33.5 O8 12 12.7 08 1/2" 30 37 10 16 15.9 10 5/8" 34 40 12 20 19.1 12 3/4" 38 43 16 25 25.4 16 1" 46 60 20 32 31.8 20 1 1/4" 56 66 24 40 38.1 24 1 1/2" 65 76.5 32 50 50.8 32 2" 80 80 6 WIRE EXTRA HIGH PRESSURE FERRULES DN mm SIZE Inch D L HEH 16 25 25.4 16 1" 46 75 20 32 31.8 20 1 1/4" 60 88 24 40 38.1 24 1 1/2" 67 94 32 50 50.8 32 2" 84.5 99 HOSE CONNECTORS 12
BSP MALE PARALLEL HA10 HOSE CONNECTORS 2001 B.S.P. MALE PARALLEL - 6 0 CONE SEAT Thread DN mm SIZE Inch F H L S O4 6 6.30 04 1/4" 1/4"-19 26.0 54.5 19 O6 10 9.50 06 3/8" 3/8"-19 28.5 59.0 22 O8 12 12.70 08 1/2" 1/2"-14 33.0 66.0 27 10 16 15.90 10 5/8" 5/8"-14 35.0 71.0 30 12 20 19.10 12 3/4" 3/4"-14 39.0 80.0 32 16 25 25.40 16 1" 1"-11 43.5 98.5 41 20 32 31.80 20 1 1/4" 1 1/4"-11 47.0 108.0 50 24 40 38.10 24 1 1/2" 1 1/2"-11 51.0 121.5 55 32 50 50.80 32 2" 2"-11 53.5 129.5 70 BSPT MALE HA22 B.S.P. TAPER MALE - 6 0 CONE SEAT Thread DN mm SIZE Inch F H L S O4 6 6.3 04 1/4" 1/4"-19 26.7 55.2 15 O6 10 9.5 06 3/8" 3/8"-19 27.8 58.3 19 O8 12 12.7 08 1/2" 1/2"-14 34.5 67.5 22 12 20 19.1 12 3/4" 3/4"-14 37.2 78.2 27 16 25 25.4 16 1" 1"-11 44.0 99.0 36 20 32 31.8 20 1 1/4" 1 1/4"-11 48.1 109.1 46 24 40 38.1 24 1 1/2" 1 1/2"-11 49.9 120.4 50 32 50 50.8 32 2" 2"-11 55.2 131.2 65 BSP FEMALE STANDARD HA17 B.S.P. FEMALE - 6 0 CONE Thread DN mm SIZE Inch F H L G S O4 6 6.3 04 1/4" 1/4"-19 18.7 47.2 4.1 19 O6 10 9.5 06 3/8" 3/8"-19 19.7 50.2 5.8 22 O8 12 12.7 08 1/2" 1/2"-14 22.7 55.7 6.5 27 10 16 15.9 10 5/8" 5/8"-14 22.7 58.7 9.3 30 12 20 19.1 12 3/4" 3/4"-14 26.1 67.1 8.6 32 16 25 25.4 16 1" 1"-11 29.8 84.8 10.5 41 20 32 31.8 20 1 1/4" 1 1/4"-11 32.9 93.9 10.0 50 24 40 38.1 24 1 1/2" 1 1/2"-11 36.0 106.5 12.0 55 32 50 50.8 32 2" 2"-11 37.0 113.0 16.0 70 HOSE CONNECTORS 13
HOSE CONNECTORS 2001 BSPF 90 DEG COMPACT HB17 90 B.S.P. COMPACT ELBOW - 6 0 CONE SOLID - CRIMPED NUT Thread DN mm SIZE Inch F H L K G S S1 O4 6 6.3 04 1/4" 1/4"-19 18.5 47.0 22.0 4.1 19.0 14.0 O6 10 9.5 06 3/8" 3/8"-19 20.0 50.5 24.5 5.8 22.0 17.0 O8 12 12.7 08 1/2" 1/2"-14 24.0 57.0 29.0 6.5 27.0 22.0 BSPF 90 DEG STANDARD HG17 B.S.P. 90 SWEPT ELBOW - 6 0 CONE - SOLID Thread DN mm SIZE Inch F H L K G S O4 6 6.3 04 1/4" 1/4"-19 24.0 52.0 28.0 4.1 19.0 O6 10 9.5 06 3/8" 3/8"-19 34.0 64.0 36.5 5.8 22.0 O8 12 12.7 08 1/2" 1/2"-14 41.0 74.0 44.0 6.5 27.0 10 16 15.9 10 5/8" 5/8"-14 49.0 85.0 50.5 9.3 30.0 12 20 19.1 12 3/4" 3/4"-14 58.0 99.0 60.5 8.6 32.0 16 25 25.4 16 1" 1"-11 74.0 129.0 72.5 10.5 41.0 20 32 31.8 20 1 1/4" 1 1/4"-11 72.0 153.0 89.0 10.0 50.0 24 40 38.1 24 1 1/2" 1 1/2"-11 108.0 179.0 101.5 12.0 55.0 32 50 50.8 32 2" 2"-11 142.0 218.0 217.5 16.0 70.0 BSPF 45 DEG STANDARD HJ17 B.S.P. 45 SWEPT ELBOW - 6 0 CONE - SOLID Thread DN mm SIZE Inch F H L K G S S1 O4 6 6.3 04 1/4" 1/4"-19 40.0 68.5 16.5 4.1 19.0 O6 10 9.5 06 3/8" 3/8"-19 53.5 84.0 19.5 5.8 22.0 O8 12 12.7 08 1/2" 1/2"-14 64.0 97.0 24.5 6.5 27.0 10 16 15.9 10 5/8" 5/8"-14 78.5 114.5 26.0 9.3 30.0 12 20 19.1 12 3/4" 3/4"-14 88.5 129.5 35.0 8.6 32.0 16 25 25.4 16 1" 1"-11 110.0 165.0 42.0 10.5 41.0 20 32 31.8 20 1 1/4" 1 1/4"-11 138.0 199.0 54.5 10.0 50.0 24 40 38.1 24 1 1/2" 1 1/2"-11 162.0 232.5 58.5 12.0 55.0 32 50 50.8 32 2" 2"-11 205.5 281.5 66.5 16.0 70.0 HOSE CONNECTORS 14
BSPF FLAT FACE HA19 HOSE CONNECTORS 2001 B.S.P. FEMALE - FLAT FACE PRESSED NUT Thread DN mm SIZE Inch F H L G S O4 6 6.3 04 1/4" 1/4"-19 15.5 44 7 19 06 10 9.5 06 3/8" 3/8"-19 16.5 47 9 22 O8 12 12.7 08 1/2" 1/2"-14 19.2 52.2 10 27 10 16 15.9 10 5/8" 5/8"-14 20.5 56.5 11.5 30 12 20 19.1 12 3/4" 3/4"-14 22.7 63.7 12 32 16 25 25.4 16 1" 1"-11 26.3 81.3 14 41 NPT MALE STANDARD HA34 N.P.T.F. MALE - 6 0 CONE SEAT Thread DN mm SIZE Inch F H L S O4 6 6.3 04 1/4" 1/4"-18 26.5 55 15 O6 10 9.5 06 3/8" 3/8"-18 27.5 58 19 O8 12 12.7 08 1/2" 1/2"-14 34.5 67.5 22 12 20 19.1 12 3/4" 3/4"-14 37.2 78.2 27 16 25 25.4 16 1" 1"-11,5 43.5 98.5 36 20 32 31.8 20 1 1/4" 1 1/4"-11,5 46.1 107 46 24 40 38.1 24 1 1/2" 1 1/2"-11,5 54 112 53 32 50 50.8 32 2" 2"-11,5 57 130 65 HOSE CONNECTORS 15
HOSE CONNECTORS 2001 SAE FLANGE 3000PSI STANDARD HA38 STRAIGHT SAE J518 FLANGE - 3000 PSI SOLID FLANGE DN mm SIZE Inch H L A O8 12 12.7 08 1/2" 1/2" 48.5 81.5 30.2 12 20 19.1 12 3/4" 3/4" 53.5 94.5 38.1 16 25 25.4 16 1" 1" 60.5 115.5 44.5 20 32 31.8 20 1 1/4" 1 1/4" 65.5 126.5 50.8 24 40 38.1 24 1 1/2" 1 1/2" 70.5 141.0 60.3 32 50 50.8 32 2" 2" 77.0 153.0 71.4 STRAIGHT KOMATSU FLANGE - SOLID 10 16 15.9 10 5/8" 5/8" 49.3 85.3 34 SAE FLANGE 3000 PSI 90 DEG STANDARD HG38 90 SAE J518 FLANGE - 3000 PSI SOLID FLANGE DN mm SIZE Inch H L K A O8 12 12.7 08 1/2" 1/2" 41 74 42 30.2 12 20 19.1 12 3/4" 3/4" 58 99 57 38.1 16 25 25.4 16 1" 1" 74 129 69 44.5 20 32 31.8 20 1 1/4" 1 1/4" 92 153 87 50.8 24 40 38.1 24 1 1/2" 1 1/2" 108 179 101 60.3 32 50 50.8 32 2" 2" 142 218 134 71.4 90 KOMATSU FLANGE - SOLID 10 16 15.9 10 5/8" 5/8" 49 85 49 34 HOSE CONNECTORS 16
HOSE CONNECTORS 2001 SAE J518 SPLIT FLANGE HALF 3000 PSI HJ38 SAE J518 SPLIT FLANGE HALF 3000 PSI FLANGE DN mm SIZE Inch H L K A O8 12 12.7 08 1/2" 1/2" 62.0 95 22.5 30.2 12 20 19.1 12 3/4" 3/4" 86.5 128 33 38.1 16 25 25.4 16 1" 1" 107.5 163 39.5 44.5 20 32 31.8 20 1 1/4" 1 1/4" 136.5 198 53 50.8 24 40 38.1 24 1 1/2" 1 1/2" 162.0 233 58.5 60.3 32 50 50.8 32 2" 2" 210.5 287 71.5 71.4 SPLIT FLANGE 3000PSI HZF38 FLANGE SAE J518 SPLIT FLANGE HALF 3000 PSI A B C D E 08 1/2" 54 23 38.10 9 8.70 12 3/4" 65.10 26.10 47.60 11 11.10 16 1" 69.80 29.40 52.40 11 13.10 20 1 1/4" 79.40 36.50 58.70 12 15.10 24 1 1/2" 93.70 41.30 69.80 13.50 17.80 32 2" 101.60 48.40 77.80 13.50 21.40 HOSE CONNECTORS 17
HOSE CONNECTORS 2001 SAE FLANGE 6000 PSI STANDARD HA39 STRAIGHT SAE J518 FLANGE - 6000 PSI ONE PIECE FLANGE DN mm SIZE Inch H L A O8 12 12.7 08 1/2" 1/2" 49.5 82.5 31.7 12 20 19.1 12 3/4" 3/4" 60.0 101.0 41.3 16 25 25.4 16 1" 1" 66.5 121.5 47.6 20 32 31.8 20 1 1/4" 1 1/4" 71.0 132.0 54.0 24 40 38.1 24 1 1/2" 1 1/2" 81.0 151.5 63.5 32 50 50.8 32 2" 2" 100.0 176.0 79.4 SAE FLANGE 90 DEG 6000 PSI STANDARD HG39 90 SAE J518 FLANGE - 6000 PSI ONE PIECE FLANGE DN mm SIZE Inch H L K A O8 12 12.7 08 1/2" 1/2" 41 74 42 31.7 12 20 19.1 12 3/4" 3/4" 58 99 62 41.3 16 25 25.4 16 1" 1" 74 129 75 47.6 20 32 31.8 20 1 1/4" 1 1/4" 92 153 90 54.0 24 40 38.1 24 1 1/2" 1 1/2" 108 179 102 63.5 32 50 50.8 32 2" 2" 142 218 137 79.4 HOSE CONNECTORS 18
HOSE CONNECTORS 2001 SAE FLANGE 6000 PSI 45 DEG STANDARD HJ39 45 SAE J518 FLANGE - 6000 PSI ONE PIECE FLANGE DN mm SIZE Inch H L K A O8 12 12.7 08 1/2" 1/2" 63.0 96.0 23.5 31.7 12 20 19.1 12 3/4" 3/4" 89.5 130.5 36.0 41.3 16 25 25.4 16 1" 1" 112.0 167.0 44.0 47.6 20 32 31.8 20 1 1/4" 1 1/4" 138.5 200.0 55.0 54.0 24 40 38.1 24 1 1/2" 1 1/2" 162.5 233.0 58.5 63.5 12 20 19.1 12 3/4" 3/4" 89.5 130.5 36.0 41.3 32 50 50.8 32 2" 2" 212.5 289.0 73.5 79.4 SAE SPLIT FLANGE 6000 PSI HZF39 FLANGE SAE J518 SPLIT FLANGE HALF 6000 PSI A B C D E O8 12 16 20 24 32 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 56.3 71.4 80.9 95.2 112.7 133.3 23.8 30.2 34.9 38.9 47.6 57.1 40.5 50.8 57.1 66.7 79.4 96.8 9 11 13 15 17 21 9.2 11.9 13.9 15.8 18.2 22.2 HOSE CONNECTORS 19
HOSE CONNECTORS 2001 JIC MALE STANDARD HA50 J.I.C. MALE - 74 CONE Thread DN mm SIZE Inch F H L S O4 6 6.30 04 1/4" 7/16"-20 26.5 55.0 12.0 O5 8 7.90 05 5/16" 1/2"-20 26.5 55.0 14.0 O6 10 9.50 06 3/8" 9/16"-18 26.5 57.0 15.0 O8 12 12.70 08 1/2" 3/4"-16 28.7 61.7 19.0 10 16 15.90 10 5/8" 7/8"-14 34.7 70.7 24.0 12 20 19.10 12 3/4" 1 1/16"-12 40.4 81.4 27.0 16 25 25.40 16 1" 1 5/16"-12 42.7 97.7 36.0 20 32 31.80 20 1 1/4" 1 5/8"-12 46.5 107.5 46.0 24 40 38.10 24 1 1/2" 1 7/8"-12 51.2 121.7 50.0 32 50 50.80 32 2" 2 1/2"-12 62.2 138.2 65.0 JIC FEMALE STANDARD HA53 J.I.C. FEMALE - 74 CONE Thread DN mm SIZE Inch F H L S O4 6 6.3 04 1/4" 7/16"-20 14.7 43.2 15.0 O5 8 7.9 05 5/16" 1/2"-20 16.0 44.5 17.0 O6 10 9.5 06 3/8" 9/16"-18 16.0 46.5 19.0 O8 12 12.7 08 1/2" 3/4"-16 20.0 53.0 24.0 10 16 15.9 10 5/8" 7/8"-14 21.5 57.5 27.0 12 20 19.1 12 3/4" 1 1/16"-12 24.0 65.0 32.0 16 25 25.4 16 1" 1 5/16"-12 26.0 81.0 41.0 20 32 31.8 20 1 1/4" 1 5/8"-12 27.8 88.8 50.0 24 40 38.1 2'4 1 1/2" 1 7/8"-12 31.5 102.0 55.0 32 50 50.8 32 2" 2 1/2"-12 33.5 109.5 70.0 HOSE CONNECTORS 20
HOSE CONNECTORS 2001 JIC FEMALE 90 DEG STANDARD HG53 J.I.C. 90 SWEPT ELBOW - 74 CONE SEAT SOLID - PRESSED NUT Thread DN mm SIZE Inch F H L K S O4 6 6.3 04 1/4" 7/16"-20 24 52 24 15 O5 8 7.9 05 5/16" 1/2"-20 31 59 29 17 O6 10 9.5 06 3/8" 9/16"-18 34 64 33 19 O8 12 12.7 08 1/2" 3/4"-16 41 74 41 24 10 16 15.9 10 5/8" 7/8"-14 49 85 49 27 12 20 19.1 12 3/4" 1 1/16"-12 58 99 59 32 16 25 25.4 16 1" 1 5/16"-12 74 129 72 41 20 32 31.8 20 1 1/4" 1 5/8"-12 92 153 87 50 24 40 38.1 2'4 1 1/2" 1 7/8"-12 108 179 100 55 32 50 50.8 32 2" 2 1/2"-12 142 218 126 70 JIC FEMALE 45 DEG HJ53 J.I.C. 45 SWEPT ELBOW - 74 CONE SEAT SOLID - PRESSED NUT Thread DN mm SIZE Inch F H L K S O4 6 6.3 04 1/4" 7/16"-20 37.0 66.0 13.5 15.0 O5 8 7.9 05 5/16" 1/2"-20 46.0 74.5 16.0 17.0 O6 10 9.5 06 3/8" 9/16"-18 51.0 81.0 17.0 19.0 O8 12 12.7 08 1/2" 3/4"-16 62.0 98.0 22.5 24.0 10 16 15.9 10 5/8" 7/8"-14 77.0 113.0 25.0 27.0 12 20 19.1 12 3/4" 1 1/16"-12 86.0 127.0 33.0 32.0 16 25 25.4 16 1" 1 5/16"-12 107.5 162.5 40.0 41.0 20 32 31.8 20 1 1/4" 1 5/8"-12 135.5 196.5 52.0 50.0 24 40 38.1 24 1 1/2" 1 7/8"-12 161.0 231.0 57.0 55.0 32 50 50.8 32 2" 2 1/2"-12 205.5 281.0 66.5 70.0 HOSE CONNECTORS 21
METRIC MALE (LIGHT)STANDARD HA65 HOSE CONNECTORS 2001 METRIC MALE - 24 CONE SEAT LIGHT TYPE Thread DN mm SIZE Inch F H L E S O4 6 6.30 04 1/4" M12x1,5 23 52 6 14 O4 6 6.30 04 1/4" M14x1,5 23 52 8 14 O5 8 7.90 05 5/16" M16x1,5 24 53 10 17 O6 10 9.50 06 3/8" M16x1,5 24 55 10 17 O6 10 9.50 06 3/8" M18x1,5 24 55 12 19 O8 12 12.70 08 1/2" M22x1,5 29 62 15 24 10 16 15.90 10 5/8" M26x1,5 29 65 18 27 12 20 19.10 12 3/4" M30x2 32 73 22 32 16 25 25.40 16 1" M36x2 33 88 28 36 20 32 31.80 20 1 1/4" M45x2 38 99 35 46 24 40 38.10 24 1 1/2" M52x2 41 111 42 55 METRIC MALE (HEAVY) STANDARD HA68 METRIC MALE - 24 CONE SEAT HEAVY TYPE Thread DN mm SIZE Inch F H L E S O4 6 6.3 04 1/4" M16x1,5 25 54 8 17 O4 6 6.3 04 1/4" M18x1,5 26 55 10 19 O6 10 9.5 06 3/8" M20x1,5 27 58 12 22 O6 10 9.5 06 3/8" M22X1,5 29 60 14 24 O8 12 12.7 08 1/2" M24x1,5 31 64 16 27 10 16 15.9 10 5/8" M30x2 33 69 20 32 12 20 19.1 12 3/4" M36x2 36 77 25 36 16 25 25.4 16 1" M42x2 41 96 30 46 20 32 31.8 20 1 1/4" M52x2 46 107 38 55 HOSE CONNECTORS 22
METRIC FEMALE (LIGHT) STANDARD HA67 HOSE CONNECTORS 2001 O'RING METRIC FEMALE - 24 CONE LOOSE NUT - LIGHT TYPE Thread Tube DN mm SIZE Inch F mm H L S O4 6 6.3 04 1/4" M12x1,5 6 23 52 17 O4 6 6.3 04 1/4" M14x1,5 8 24 53 17 O5 8 7.9 05 5/16" M16x1,5 10 25 54 19 O6 10 9.5 06 3/8" M16x1,5 10 25 56 19 O6 10 9.5 06 3/8" M18x1,5 12 25 56 22 O8 12 12.7 08 1/2" M22x1,5 15 27 60 27 10 16 15.9 10 5/8" M26x1,5 18 28 64 32 12 20 19.1 12 3/4" M30x2 22 31 72 36 16 25 25.4 16 1" M36x2 28 33 88 41 20 32 31.8 20 1 1/4" M45x2 35 37 98 50 24 40 38.1 24 1 1/2" M52x2 42 39 109 60 METRIC FEMALE (HEAVY) STANDARD HA69 O'RING METRIC FEMALE -24 CONE LOOSE NUT - HEAVY TYPE Thread Tube DN mm SIZE Inch F mm H L S O4 6 6.3 04 1/4" M16x1,5 8 24 53 19 O4 6 6.3 04 1/4" M18x1,5 10 25 54 22 O6 10 9.5 06 3/8" M20x1,5 12 25 56 24 O6 10 9.5 06 3/8" M22x1,5 14 29 60 27 O8 12 12.7 08 1/2" M24x1,5 16 31 64 30 10 16 15.9 10 5/8" M30x2 20 35 71 36 12 20 19.1 12 3/4" M36x2 25 39 80 46 16 25 25.4 16 1" M42x2 30 41 96 50 20 32 31.8 20 1 1/4" M52x2 38 47 108 60 HOSE CONNECTORS 23
METRIC FEMALE 90 DEG (LIGHT) STANDARD HG67 HOSE CONNECTORS 2001 90 O-RING METRIC SWEPT ELBOW - 24 CONE SOLID - LOOSE NUT - LIGHT TYPE Thread Tube DN mm SIZE Inch F mm H L K S 4 6 6.3 04 1/4" M12x1,5 6 24 52 28 17 4 6 6.3 04 1/4" M14x1,5 8 24 52 28 17 6 10 9.5 06 3/8" M16x1,5 10 34 64 36 19 6 10 9.5 06 3/8" M18x1,5 12 34 64 35 22 8 12 12.7 08 1/2" M22x1,5 15 41 74 41 27 10 16 15.9 10 5/8" M26x1,5 18 49 85 49 32 12 20 19.1 12 3/4" M30x2 22 58 99 54 36 16 25 25.4 16 1" M36x2 28 74 129 68 41 20 32 31.8 20 1 1/4" M45x2 35 92 153 86 50 24 40 38.1 24 1 1/2" M52x2 42 108 179 96 60 METRIC FEMALE 90 DEG (HEAVY) STANDARD HG69 90 O-RING METRIC SWEPT ELBOW - 24 CONE SOLID - LOOSE NUT - HEAVY TYPE Thread Tube DN mm SIZE Inch F mm H L K S O4 6 6.3 04 1/4" M16x1,5 8 24 52 28 19 O4 6 6.3 04 1/4" M18x1,5 10 24 52 30 22 O6 10 9.5 06 3/8" M20x1,5 12 34 64 35 24 O6 10 9.5 06 3/8" M22x1,5 14 34 64 37 27 O8 12 12.7 08 1/2" M24x1,5 16 41 74 42 30 10 16 15.9 10 5/8" M30x2 20 49 85 53 36 12 20 19.1 12 3/4" M36x2 25 58 99 59 41 16 25 25.4 16 1" M42x2 30 74 129 71 50 20 32 31.8 20 1 1/4" M52x2 38 92 153 86 60 HOSE CONNECTORS 24
HOSE CONNECTORS 2001 METRIC FEMALE (LIGHT ) 45 DEG STANDARD HJ67 TIEFFE Part. N 45 O-RING METRIC SWEPT ELBOW - 24 CONE SOLID - LOOSE NUT - LIGHT TYPE Thread Tube DN mm SIZE Inch F mm H L K S O4 6 6.3 04 1/4" M12x1,5 6 43.0 71.5 19.0 17 O4 6 6.3 04 1/4" M14x1,5 8 39.5 68.0 16.0 17 O6 10 9.5 06 3/8" M16x1,5 10 58.0 88.0 23.5 19 O6 10 9.5 06 3/8" M18x1,5 12 53.0 83.5 19.0 22 O8 12 12.7 08 1/2" M22x1,5 15 62.0 95.0 22.5 27 10 16 15.9 10 5/8" M26x1,5 18 79.0 115.0 26.0 32 12 20 19.1 12 3/4" M30x2 22 87.0 127.5 31.0 36 16 25 25.4 16 1" M36x2 28 109.0 164.0 40.0 41 20 32 31.8 20 1 1/4" M45x2 35 137.5 198.5 53.0 50 24 40 38.1 24 1 1/2" M52x2 42 161.5 231.5 56.5 60 METRIC FEMALE (HEAVY) 45 DEG STANDARD HJ69 45 O-RING METRIC SWEPT ELBOW - 24 CONE SOLID - LOOSE NUT - HEAVY TYPE Thread Tube DN mm SIZE Inch F mm H L K S O4 6 6.3 04 1/4" M16x1,5 8 39.5 68.0 16.0 19.0 O4 6 6.3 04 1/4" M18x1,5 10 40.5 69.0 16.5 22.0 O6 10 9.5 06 3/8" M20x1,5 12 53.0 83.5 19.0 24.0 O6 10 9.5 06 3/8" M22x1,5 14 54.5 85.0 20.5 27.0 O8 12 12.7 08 1/2" M24x1,5 16 63.5 96.5 24.0 30.0 10 16 15.9 10 5/8" M30x2 20 81.5 117.5 28.0 36.0 12 20 19.1 12 3/4" M36x2 25 90.0 131.0 35.5 41.0 16 25 25.4 16 1" M42x2 30 110.0 165.0 41.5 50.0 20 32 31.8 20 1 1/4" M52x2 38 139.0 200.0 54.0 60.0 HOSE CONNECTORS 25
HOSE CONNECTORS 2001 KOMATSU FEMALE STANDARD HA76 "KOMATSU" METRIC FEMALE - 60º CONE SEAT PRESSED NUT Thread DN mm SIZE Inch F O4 6 6.3 04 1/4" M14x1,5 O6 10 9.5 06 3/8" M18x1,5 O8 12 12.7 08 1/2" M22X1,5 10 16 15.9 10 5/8" M24x1,5 12 20 19.1 12 3/4" M30x1,5 16 25 25.4 16 1" M33x15 20 32 31.8 20 1 1/4" M36x1,5 24 40 38.1 24 1 1/2" M42x1,5 K ARCHER FEMALE STANDARD HA83 WASHCLEANER FEMALE "FK" TYPE Thread DN mm SIZE Inch F H L D O4 6 6.3 04 1/4" M22x1,5 31 59.5 14 O5 8 7.9 05 5/16" M22x1,5 31 59.5 14 O6 10 9.5 06 3/8" M22x1,5 31 61.5 14 BSP BANJO HA92 B.S.P. BANJO SOLID Bolt DN mm SIZE Inch Thread H L D S D O4 6 6.3 04 1/4" 1/4"-19 24.5 65.0 13.3 14.0 O6 10 9.5 06 3/8" 3/8"-19 26.5 71.0 16.9 17.0 O8 12 12.7 08 1/2" 1/2"-14 31.0 82.0 21.0 23.5 10 16 15.9 10 5/8" 5/8"-14 32.5 88.5 23.3 25.0 12 20 19.1 12 3/4" 3/4"-14 37.5 101.0 26.5 30.0 16 25 25.4 16 1" 1"-11 50.5 134.5 33.5 38.0 HOSE CONNECTORS 26
HOSE CONNECTORS 2001 METRIC BANJO HA93 METRIC BANJO - ONE PIECE Bolt DN mm SIZE Inch Thread H L D S D O4 6 6.3 04 1/4" M14x1,5 24.5 65.0 14.1 14.0 O6 10 9.5 06 3/8" M16x1,5 25.5 71.0 16.1 16.0 O8 12 12.7 08 1/2" M18x1,5 31.5 80.5 18.1 20.0 10 16 15.9 10 5/8" M22x1,5 34.0 88.0 22.1 23.5 12 20 19.1 12 3/4" M30x1,5 43.5 111.5 30.1 36.0 DOUBLE INSERT HA96 DOUBLE INSERT DN mm SIZE Inch H L O4 6 6.3 04 1/4" 13 70 O5 8 7.9 05 5/16" 13 70 O6 10 9.5 06 3/8" 13 74 O8 12 12.7 08 1/2" 15 81 10 16 15.9 10 5/8" 15 87 12 20 19.1 12 3/4" 17 99 16 25 25.4 16 1" 20 130 HOSE CONNECTORS 27
ADAPTORS 2001 BSP MALE X BSP MALE EQUAL BSP MALE X BSP MALE UNEQUAL BSP MALE X BSP TAPER MALE BSP MALE X NPTF MALE BSP MALE X JIC MALE JIC MALE X NPTF MALE JIC MALE X JIC MALE BSP MALE X BSP FEMALE BSP FEMALE X BSP FEMALE BSP BULKHEAD BSP LOCKNUT BSP BLANKING PLUG BSP MALE / MALE 90º ELBOW BSP MALE / FEMALE 90º COMPACT ELBOW JIC MALE X NPTF MALE 90º ELBOW JIC MALE X SAE 'O' RING BOSS MALE BSP MALE X SAE 'O' RING BOSS MALE BSP MALE X FEMALE REDUCING BUSH BSP MALE X METRIC MALE BSP MALE X JIC FEMALE JIC BLANKING PLUG BSP EQUAL FEMALE 'T' JIC MALE X SAE'O'RING BOSS ADJUSTER 90º JIC MALE X JIC FEMALE 90º BSP TEE MALE/ MALE MALE EQUAL JIC MALE X MALE X FEMALE TEE BSP BLANKING CAP METRIC MALE X MALE JIC MALE BULKHEAD WITH LOCKNUT BSP TEE MALE X MALE X FEMALE BSP TEE MALE X FEMALE / MALE BSP MALE X FEMALE 45º SWEPT ELBOW BSP MALE / FEMALE 90º SWEPT ELBOW BANJO BOLT METRIC PLUG METRIC CAP ADAPTORS 28
STEEL TUBING 2001 Steel Tubes DIN 2391 HWMT OD SEAMLESS STEEL TUBES DIN 2391 MATERIAL ST 37.4 NBK THICKNESS STATIC DYNAMIC BURST KG/MTR MM W/P BAR W/P BAR PRE. BAR APPROX 4 0.75 409 393 1,820 0.063 5 1 432 416 2,120 0.099 6 1 389 374 1,680 0.123 6 1.5 549 528 3,050 0.166 6 1 333 289 1,190 0.173 8 1.5 431 414 1,860 0.24 10 1 282 249 870 0.222 10 1.5 373 358 1,380 0.314 12 1.5 353 305 1,150 0.388 12 2 409 393 1,580 0.493 14 1.5 302 265 940 0.462 15 1.5 282 249 980 0.499 15 2 376 323 1,250 0.641 16 2 353 305 1,170 0.691 18 1.5 235 210 780 0.61 18 2 313 274 1,040 0.789 20 1.5 212 191 570 0.684 20 2 282 249 920 0.888 20 2.5 353 305 1,220 1.079 22 2 256 228 850 0.986 22 2.5 320 280 1,040 1.202 25 2.5 282 249 920 1.387 25 3 338 294 1,050 1.628 28 2 201 182 620 1.282 28 2.5 252 224 770 1.572 28 3 302 265 920 1.85 30 3 282 249 920 1.998 35 2.5 201 182 620 2.004 35 3 242 216 720 2.367 38 2.5 186 168 550 2.189 38 4 297 261 970 3.354 42 3 201 182 580 2.885 STEEL TUBING 29
Accessories 2001 QUICK RELEASE COUPLINGS H4000 SIZE IN INCHES BSP NPT SPRING GUARDS HZP SIZE IN MM ID 2 1/8 1/8 4 1/4 1/4 6 3/8 3/8 8 1/2 1/2 12 3/4 3/4 16 1 1 10 10 12 12 15 15 19 19 21 21 23 23 26 26 31 31 33 33 37 37 40 40 41 41 47 47 52 52 DOWTY SEALS - METRIC HZS05 ID BONDED MM DOWTY SEALS - INCH SIZES HZS01 ID BONDED INCHES 10 10 12 12 14 14 16 16 18 18 20 20 22 22 24 24 26 26 28 28 30 30 36 36 2 4 6 8 10 12 16 20 24 32 1/8 1/4 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2 2 Accessories 30
Other Products 2001 Other Products Range Aircondition and Refrigeration Hoses Steel Braided fuel hoses Oil Suction/Delivery hoses Water Suction/Delivery hoses Air Hoses Radiator hoses PVC reinforced hoses Cement hoses Oxygen/Acetylene hoses Nylon Tubing Copper Tubing Reusable fittings in different threads and sizes Eremeto Fittings Brass Compression fittings Brass Adaptors Brass Low pressure fittings Stainless Steel compression fittings Camlock Coupling, King Nipples etc. Bolt clamps, Steel clips Tube clamps Brass Air Coupler Plastic Connectors Ball Valves and Gate Valves "O" Rings, Copper washers etc. Other Products 31
Technical Information 2001 Technical Information 32
Technical Information 2001 Technical Information 33
Technical Information 2001 PRESSURE CONVERSION CHART 1 psi = 0.06896 BAR = 6.8966 KPa = 0.0703 KG/SQ CM 1 BAR = 14.5 PSI = 100 KPa = 1/10 MPa = 1.019 KG/SQ CM 1 KG/SQ CM = 14.22 PSI = 98.1 KPa =.981 BAR 1 MPa = 145 PSI = 10 BAR = 10.19 KG/SQ CM 1 KPa = 0.145 PSI = 1/100 BAR = 0.01019KG/SQ CM EXAMPLE :- 21.1 KG/SQ CM = 300 PSI = 20.6 BARS = 2060 KPa = 2.06 Mpa kg/sq cm p.s.i bars kg/sq cm p.s.i bars kg/sq cm p.s.i bars kg/sq cm p.s.i bars kg/sq cm p.s.i bars 21.1 300 20.69 161.74 2300 158.62 302.39 4300 296.55 443.04 6300 434.48 583.68 8300 572.41 24.6 350 24.14 165.26 2350 162.07 305.91 4350 300.00 446.55 6350 437.93 587.20 8350 575.86 28.1 400 27.59 168.78 2400 165.52 309.42 4400 303.45 450.07 6400 441.38 590.72 8400 579.31 31.6 450 31.03 172.29 2450 168.97 312.94 4450 306.90 453.59 6450 444.83 594.23 8450 582.76 35.2 500 34.48 175.81 2500 172.41 316.46 4500 310.34 457.10 6500 448.28 597.75 8500 586.21 38.7 550 37.93 179.32 2550 175.86 319.97 4550 313.79 460.62 6550 451.72 601.27 8550 589.66 42.2 600 41.38 182.84 2600 179.31 323.49 4600 317.24 464.14 6600 455.17 604.78 8600 593.10 45.7 650 44.83 186.36 2650 182.76 327.00 4650 320.69 467.65 6650 458.62 608.30 8650 596.55 49.2 700 48.28 189.87 2700 186.21 330.52 4700 324.14 471.17 6700 462.07 611.81 8700 600.00 52.7 750 51.72 193.39 2750 189.66 334.04 4750 327.59 474.68 6750 465.52 615.33 8750 603.45 56.3 800 55.17 196.91 2800 193.10 337.55 4800 331.03 478.20 6800 468.97 618.85 8800 606.90 59.8 850 58.62 200.42 2850 196.55 341.07 4850 334.48 481.72 6850 472.41 622.36 8850 610.34 63.3 900 62.07 203.94 2900 200.00 344.59 4900 337.93 485.23 6900 475.86 625.88 8900 613.79 66.8 950 65.52 207.45 2950 203.45 348.10 4950 341.38 488.75 6950 479.31 629.40 8950 617.24 70.3 1000 68.97 210.97 3000 206.90 351.62 5000 344.83 492.26 7000 482.76 632.91 9000 620.69 73.8 1050 72.41 214.49 3050 210.34 355.13 5050 348.28 495.78 7050 486.21 636.43 9050 624.14 77.3 1100 75.86 218.00 3100 213.79 358.65 5100 351.72 499.30 7100 489.66 639.94 9100 627.59 80.9 1150 79.31 221.52 3150 217.24 362.17 5150 355.17 502.81 7150 493.10 643.46 9150 631.03 84.4 1200 82.76 225.04 3200 220.69 365.68 5200 358.62 506.33 7200 496.55 646.98 9200 634.48 87.9 1250 86.21 228.55 3250 224.14 369.20 5250 362.07 509.85 7250 500.00 650.49 9250 637.93 91.4 1300 89.66 232.07 3300 227.59 372.71 5300 365.52 513.36 7300 503.45 654.01 9300 641.38 94.9 1350 93.10 235.58 3350 231.03 376.23 5350 368.97 516.88 7350 506.90 657.52 9350 644.83 98.4 1400 96.55 239.10 3400 234.48 379.75 5400 372.41 520.39 7400 510.34 661.04 9400 648.28 102 1450 100.00 242.62 3450 237.93 383.26 5450 375.86 523.91 7450 513.79 664.56 9450 651.72 105.5 1500 103.45 246.13 3500 241.38 386.78 5500 379.31 527.43 7500 517.24 668.07 9500 655.17 109 1550 106.90 249.65 3550 244.83 390.30 5550 382.76 530.94 7550 520.69 671.59 9550 658.62 112.5 1600 110.34 253.16 3600 248.28 393.81 5600 386.21 534.46 7600 524.14 675.11 9600 662.07 116 1650 113.79 256.68 3650 251.72 397.33 5650 389.66 537.97 7650 527.59 678.62 9650 665.52 119.5 1700 117.24 260.20 3700 255.17 400.84 5700 393.10 541.49 7700 531.03 682.14 9700 668.97 123.1 1750 120.69 263.71 3750 258.62 404.36 5750 396.55 545.01 7750 534.48 685.65 9750 672.41 126.6 1800 124.14 267.23 3800 262.07 407.88 5800 400.00 548.52 7800 537.93 689.17 9800 675.86 130.1 1850 127.59 270.75 3850 265.52 411.39 5850 403.45 552.04 7850 541.38 692.69 9850 679.31 133.6 1900 131.03 274.26 3900 268.97 414.91 5900 406.90 555.56 7900 544.83 696.20 9900 682.76 137.1 1950 134.48 277.78 3950 272.41 418.42 5950 410.34 559.07 7950 548.28 699.72 9950 686.21 140.6 2000 137.93 281.29 4000 275.86 421.94 6000 413.79 562.59 8000 551.72 703.23 10000 689.66 144.1 2050 141.38 284.81 4050 279.31 425.46 6050 417.24 566.10 8050 555.17 706.75 10050 693.10 147.7 2100 144.83 288.33 4100 282.76 428.97 6100 420.69 569.62 8100 558.62 710.27 10100 696.55 151.2 2150 148.28 291.84 4150 286.21 432.49 6150 424.14 573.14 8150 562.07 713.78 10150 700.00 154.7 2200 151.72 295.36 4200 289.66 436.01 6200 427.59 576.65 8200 565.52 717.30 10200 703.45 158.2 2250 155.17 298.87 4250 293.10 439.52 6250 431.03 580.17 8250 568.97 720.82 10250 706.90 Technical Information 34
Technical Information 2001 Technical Information 35
Technical Information 2001 Technical Information 36
Assembly and Supply of: Hydraulic Hoses and Fittings Stainless steel corrugated hoses and fittings Stainless steel expansion bellows Steel tubes, tube fittings & tube clamps Suction / Discharge, Air & Chemical hoses etc. Pressure gauges, dowty seals, ball valves, quick release couplings etc Inflex Hydraulic Engines & Machinery Spare Parts Trading llc