Advanced Aeration Systems

Advanced Aeration Systems AerWay Turf Product Catalog 1-800-457-8310 www.aerway.com

TABLE OF CONTENTS Introduction... 4-5 Turf AerWay Model System... 6 AerWay Family of Tines Shattertine... 7-9 Sportstine... 10-11 Finetine... 12-13 Super Finetine... 14-15 Coring Tine... 16-17 Folding Turf AerWay. 18 Ballast Tank Volumes... 19 Weld-on Tine Rollers... 20 Shipping Weights & HP Requirements... 21 Greens Express... 22 Power Pack... 23 Features & Options... 23

Thank you for your interest in AerWay AerWay s vision is to improve soils management practices by providing the world s soil caretakers with environmentally friendly equipment designed around AerWay s patented technologies. AerWay Turf Warranty: AerWay warrants the product to be free from defects in material and workmanship under normal use and service for a period of Five (5) years from the date of manufacture. (This is a condensed version of the AerWay Turf Warranty for a copy of the complete AerWay Turf Warranty Statement, please call 800-457- 8310.) 3

INTRODUCTION The Original AerWay 1984-1992 2 nd Generation AerWay 1992-2003 The Turf AerWay In 2003, AerWay introduced the new turf unit replacing the original frame design. The evolution of the Turf AerWay includes a new frame style and the addition of the ballast tank as standard. One unique feature is same sized rollers with different tines are interchangeable on the same size AerWay. The Turf AerWay comes in various sizes, starting at 45 up to 90. They are available in 3-point or pull type configurations. 15 or 20 Winged pull type models are also available. The Current Production Turf AerWay Pull Type Model Roller 4

The 60 3-point Turf AerWay The Pull Type Turf AerWay The Turf AerWay s are built with hollow structural steel, one piece welded construction. The roller shafts are 3 in diameter. The unit includes 35mm greaseable, sealed pillow block bearings. Each Turf AerWay can be supplied with Shattertines, Sportstines, Finetines, Super Finetines, or Coring Tines, depending on your application. The drawbars available for the pull type AerWay are straight clevis, ball hitch and gooseneck. The drawbar height is adjustable. Hydraulics: 12 Stroke double acting cylinder with mechanical lockout. 2 bore on the 45, 60 and 75 units, 2 ½ bore on the 90 unit. The larger Turf AerWay s (60, 75 or 90 ) can have two roller shafts which, when equipped with the Shattertine, can be offset to 2.5 or 5 swing angle for more tillage action. 5

Turf AerWay Model System The following example is a 90 Turf AerWay, pull type, Sportstines on 5 spacing, with ballast tank and Greens Express smoothing roller. This will help you identify or create a model number. A W G H P 9 0 2 S 5 D B G Position #: 1 1 2-3 - 4 5 6-7 8 9 Position 1: AW Stands for AerWay. All of the AerWay models start with these letters. Position 2: This position is either a P for Pull Type, or a 3 for 3 point. Position 3: This position tells you what size the machine is. In this case, it is a 90 model. Position 4: This position will tell you how many roller shafts are on this unit. Position 5: This position will tell you what type of tine is on the unit. In this case, it is a Sportstine. T: Turf Shattertine S: Sportstine C: Coring Tine F: Finetine U: Super Finetine Position 6: This position designates the spacing of the tine. In this case, it is 5 spacing. Please be aware that the Shattertine can only be mounted with 7.5 spacing (shown as 7 in this position). Position 7: This position designates the Drawbar type. The D designates the drawbar type. Left blank, it would be a 3 point hitch mount. N would be a Gooseneck, or the T would be a ball coupler. Position 8: The B designates that this unit has a Ballast tank. Position 9: The G designates that this unit has a Greens Express smoothing roller installed. 6

The AerWay Family of Tines Super Finetine Sportstine Coring Tine Finetine Shattertine 7

The NEW TURF SHATTERTINE POST June 2011 Production The New 6 Shattertine is an austempered ductile-iron tine suited for use on sports fields, golf course fairways and roughs, and all large areas of maintained turf grass. The unique angles and offsets of the Shattertine crack and shatter the compacted soil 6 and deeper. The results are improved soil air/water balance, increased microbial activity, and better fertilizer usage. Only patented AerWay Shattertines lift and fracture tough soil to increase air, water and nutrient movement. Using the Shattertine ensures deep compaction relief while the unique shattering action produces the foundation for outstanding root growth and moisture control. The New AerWay Shattertine Part Numbers: XE-75200 (left) XE-75201 (right) RK-75200 (left, with hardware) RK-75201 (right, with hardware) AK-75200 (left, box of 12 with hardware) AK-75201 (right, box of 12 with hardware) 8

Common Shattertine AerWay Models: 3 Point Units: AWGH3-45-1T7-B 45 AerWay AWGH3-60-1T7-B 60 AerWay AWGH3-75-1T7-B 75 AerWay AWGH3-90-2T7-B 90 AerWay AWGH3-45-1T7-BG 45 AerWay AWGH3-60-1T7-BG 60 AerWay AWGH3-75-1T7-BG 75 AerWay AWGH3-90-2T7-BG 90 AerWay Pull Type Units: AWGHP-45-1T7-DB 45 AerWay AWGHP-60-1T7-DB 60 AerWay AWGHP-75-1T7-DB 75 AerWay AWGHP-90-2T7-DB 90 AerWay AWGHP-45-1T7-DBG 45 AerWay AWGHP-60-1T7-DBG 60 AerWay AWGHP-75-1T7-DBG 75 AerWay AWGHP-90-2T7-DBG 90 AerWay 9

The Sportstine The Sportstine is a forged, 6 long, heavy-duty aeration tine for use on golf course fairways, sports fields and all large areas of maintained turf grass. Use of the Sportstine is fast, effective and economical. It can even be used mid-season when the need is the greatest and the window of opportunity exists. Available in 5 or 7.5 spacing. Using the Sportstine will not take the course or field out of play and there is no clean up required. Part Numbers: The AerWay Sportstine XE-65284 (single tine) RK-65284 (single tine with hardware) AK-65284 (box of 24 tines with hardware) 10

AerWay Models with Sportstines 3 Point Units with 7.5 Spacing: AWGH3-45-1S7-B 45 AerWay AWGH3-45-1S7-BG 45 AerWay AWGH3-60-1S7-B 60 AerWay AWGH3-60-1S7-BG 60 AerWay AWGH3-75-1S7-B 75 AerWay AWGH3-75-1S7-BG 75 AerWay AWGH3-90-1S7-B 90 AerWay AWGH3-90-1S7-BG 90 AerWay 3 Point Units with 5 Spacing: AWGH3-45-1S5-B 45 AerWay AWGH3-45-1S5-BG 45 AerWay AWGH3-60-1S5-B 60 AerWay AWGH3-60-1S5-BG 60 AerWay AWGH3-75-1S5-B 75 AerWay AWGH3-75-1S5-BG 75 AerWay AWGH3-90-1S5-B 90 AerWay AWGH3-90-1S5-BG 90 AerWay Pull Type Units with 7.5 Spacing: AWGHP-45-1S7-DB 45 AerWay AWGHP-45-1S7-DBG 45 AerWay AWGHP-60-1S7-DB 60 AerWay AWGHP-60-1S7-DBG 60 AerWay AWGHP-75-1S7-DB 75 AerWay AWGHP-75-1S7-DBG 75 AerWay AWGHP-90-1S7-DB 90 AerWay AWGHP-90-1S7-DBG 90 AerWay Pull Type Units with 5 Spacing: AWGHP-45-1S5-DB 45 AerWay AWGHP-45-1S5-DBG 45 AerWay AWGHP-60-1S5-DB 60 AerWay AWGHP-60-1S5-DBG 60 AerWay AWGHP-75-1S5-DB 75 AerWay AWGHP-75-1S5-DBG 75 AerWay AWGHP-90-1S5-DB 90 AerWay AWGHP-90-1S5-DBG 90 AerWay 11

The Finetine The AerWay Finetine is a 6 forged tine specifically developed for use on golf course greens, tees and all fine turf areas. Use of the Finetine is fast and effective. In combination with the Greens Express Smoothing Roller, the variable depth feature allows you to fine tune your maintenance program. Available in 5 or 7.5 spacing. Using the Finetine will not take your greens out of play and there is no clean up required. The fast venting action of the Finetine allows you to aerate 18 greens in about 3 hours. The AerWay Finetine Part Numbers: XE-56399 (Single tine) RK-56399 (single tine with hardware) AK-56399 (box of 24 tines with hardware) 12

AerWay Models with Finetines AWGH3-45-1F7-B 45 AerWay AWGH3-60-1F7-B 60 AerWay AWGH3-75-1F7-B 75 AerWay AWGH3-90-1F7-B 90 AerWay AWGH3-45-1F5-B 45 AerWay AWGH3-60-1F5-B 60 AerWay AWGH3-75-1F5-B 75 AerWay AWGH3-90-1F5-B 90 AerWay AWGHP-45-1F7-DB 45 AerWay AWGHP-60-1F7-DB 60 AerWay AWGHP-75-1F7-DB 75 AerWay AWGHP-90-2F7-DB 90 AerWay AWGHP-45-1F5-DB 45 AerWay AWGHP-60-1F5-DB 60 AerWay AWGHP-75-1F5-DB 75 AerWay AWGHP-90-2F5-DB 90 AerWay 3 Point Units with 7.5 Spacing: 3 Point Units with 5 Spacing: Pull Type Units with 7.5 Spacing: Pull Type Units with 5 Spacing: AWGH3-45-1F7-BG 45 AerWay AWGH3-60-1F7-BG 60 AerWay AWGH3-75-1F7-BG 75 AerWay AWGH3-90-1F7-BG 90 AerWay AWGH3-45-1F5-BG 45 AerWay AWGH3-60-1F5-BG 60 AerWay AWGH3-75-1F5-BG 75 AerWay AWGH3-90-1F5-BG 90 AerWay AWGHP-45-1F7-DBG 45 AerWay AWGHP-60-1F7-DBG 60 AerWay AWGHP-75-1F7-DBG 75 AerWay AWGHP-90-2F7-DBG 90 AerWay AWGHP-45-1F5-DBG 45 AerWay AWGHP-60-1F5-DBG 60 AerWay AWGHP-75-1F5-DBG 75 AerWay AWGHP-90-2F5-DBG 90 AerWay 13

The Super Finetine The AerWay Super Finetine provides venting aeration through the thatch layer and maintains infiltration rates between verticutting and coring treatments on the greens. There is no disruption of play when it is used in conjunction with the smoothing roller. The Super Finetine is available with tines as close as 3 x 3 centers and it can be retrofitted on any turf AerWay frame. The Super Finetine gives you the ability to manage your thatch. The AerWay Super Finetine penetrates through the thatch layer up to 2 deep, leaving an opening for water and nutrient to penetrate into the soil. The AerWay Super Finetine Part Numbers: XA-74022 (Super Finetine half section) AK-74023 (Hub complete with tines installed) The AerWay Super Finetine Note: The Super Finetine hub is only interchangeable with the Coring Tine-equipped shafts but complete roller assembly replacement is strongly suggested. 14

AerWay Models with Super Finetines 3 Point Units: AWGH3-45-1U3-B 45 AerWay AWGH3-60-1U3-B 60 AerWay AWGH3-75-1U3-B 75 AerWay AWGH3-90-1U3-B 90 AerWay AWGH3-45-1U3-BG 45 AerWay AWGH3-60-1U3-BG 60 AerWay AWGH3-75-1U3-BG 75 AerWay AWGH3-90-1U3-BG 90 AerWay Pull Type Units: AWGHP-45-1U3-DB 45 AerWay AWGHP-60-1U3-DB 60 AerWay AWGHP-75-1U3-DB 75 AerWay AWGHP-90-1U3-DB 90 AerWay AWGHP-45-1U3-DBG 45 AerWay AWGHP-60-1U3-DBG 60 AerWay AWGHP-75-1U3-DBG 75 AerWay AWGHP-90-1U3-DBG 90 AerWay 15 4

The Coring Tine The AerWay Coring Tine is a 4 inch long, ¾ inch diameter, heavy walled tine. They are available on 4, 5 and 6 centers. These rollers can be fitted on any turf AerWay frame. AerWay Coring Tine can be run at the same speed as your mowing equipment, making short work of dethatching and soil preparation for topdressing and overseeding. There are 6 tines per row and each hub operates independently for smooth operation. Optimum penetration is assured by ballasting the AerWay frame. Part The numbers: AerWay Coring Tine XA-69538 (single coring tine) XA-69876 (coring tine hub assembly with 6 tines installed) (These part numbers effective as of 2007) Note: The coring tine hub is only interchangeable with the Super-Finetine-equipped shafts but complete roller assembly replacement is strongly suggested. 16

AerWay Models with Coring Tines 3 Point Units with 4 Spacing: With Greens Express Added: AWGH3-45-1C4-B 45 AerWay AWGH3-45-1C4-BG 45 AerWay AWGH3-60-1C4-B 60 AerWay AWGH3-60-1C4-BG 60 AerWay AWGH3-75-1C4-B 75 AerWay AWGH3-75-1C4-BG 75 AerWay AWGH3-90-1C4-B 90 AerWay AWGH3-90-1C4-BG 90 AerWay 3 Point Units with 5 Spacing: With Greens Express Added: AWGH3-45-1C5-B 45 AerWay AWGH3-45-1C5-BG 45 AerWay AWGH3-60-1C5-B 60 AerWay AWGH3-60-1C5-BG 60 AerWay AWGH3-75-1C5-B 75 AerWay AWGH3-75-1C5-BG 75 AerWay AWGH3-90-1C5-B 90 AerWay AWGH3-90-1C5-BG 90 AerWay 3 Point Units with 6 Spacing: With Greens Express Added: AWGH3-45-1C6-B 45 AerWay AWGH3-45-1C6-BG 45 AerWay AWGH3-60-1C6-B 60 AerWay AWGH3-60-1C6-BG 60 AerWay AWGH3-75-1C6-B 75 AerWay AWGH3-75-1C6-BG 75 AerWay AWGH3-90-1C6-B 90 AerWay AWGH3-90-1C6-BG 90 AerWay Pull Type Units with 4 Spacing: AWGHP-45-1C4-DB 45 AerWay AWGHP-60-1C4-DB 60 AerWay AWGHP-75-1C4-DB 75 AerWay AWGHP-90-1C4-DB 90 AerWay Pull Type Units with 5 Spacing: AWGHP-45-1C5-B 45 AerWay AWGHP-60-1C5-B 60 AerWay AWGHP-75-1C5-B 75 AerWay AWGHP-90-1C5-B 90 AerWay Pull Type Units with 6 Spacing: AWGHP-45-1C6-B 45 AerWay AWGHP-60-1C6-B 60 AerWay AWGHP-75-1C6-B 75 AerWay AWGHP-90-1C6-B 90 AerWay With Greens Express Added: AWGHP-45-1C4-DBG 45 AerWay AWGHP-60-1C4-DBG 60 AerWay AWGHP-75-1C4-DBG 75 AerWay AWGHP-90-1C4-DBG 90 AerWay With Greens Express Added: AWGHP-45-1C5-DBG 45 AerWay AWGHP-60-1C5-DBG 60 AerWay AWGHP-75-1C5-DBG 75 AerWay AWGHP-90-1C5-DBG 90 AerWay With Greens Express Added: AWGHP-45-1C6-DBG 45 AerWay AWGHP-60-1C6-DBG 60 AerWay AWGHP-75-1C6-DBG 75 AerWay AWGHP-90-1C6-DBG 90 AerWay 17

AerWay Folding Models The AerWay folding wing models have been developed to provide large turf grass facilities and contractors with unparalleled speed of aeration coupled with fast and easy transport. The AerWay winged models come in 15 and 20 working widths with narrow transportation dimensions and are available in either 3 point or pull-type configurations. The horsepower requirement for the 15 model is 90-150 hp and for the 20 model is 120-200 hp. AWET150-T7-4 Folding Wing 3 pt model AWET200-T7-4 Folding Wing pull-type model These AerWay models are available with Turf cast Shattertines, Sportstines or Finetines on 7.5 spacing. 18

Ballast Tank Volumes: AK-68268-45 for the 45 AerWay s holds 650 lbs. of ballast (9.9 ft 3 ) AK-68268-60 for the 60 AerWay s holds 860 lbs. of ballast (13.1 ft 3 ) AK-68268-75 for the 75 AerWay s holds 1,040 lbs. of ballast (15.8 ft 3 ) AK-68268-90 for the 90 AerWay s holds 1,250 lbs. of ballast (18.9 ft 3 ) CAUTION: The ballast tank must be completely full or empty when in use. DO NOT OPERATE YOUR AERWAY WITH A PARTIALLY FILLED LIQUID BALLAST TANK! 19

Weld-On Tine Rollers Pre 1992 AerWay Models: Prior to 1992, the rollers had welded on tines. These rollers are no longer in production but they are replaceable with bolt-on tine style rollers. Have your model number ready and call for upgrade part numbers and pricing. 20

Unit Shipping Weights and HP Requirements The weights shown below are based on the Shattertine models. The weight will change with different tine choices and options. 45 AerWay Models require 20 30 HP 45 3 Point 977 lbs 45 Pull Type 1,092 lbs 60 AerWay Models require 25 40 HP 60 3 Point 1,212 lbs 60 Pull Type 1,505 1,555 lbs 75 AerWay Models require 30 45 HP 75 3 Point 1,211 1,228 lbs 75 Pull Type 1,638 1,583 lbs 90 AerWay Model require 40 65 HP 90 3 Point 1,465 lbs 90 Pull Type 1,780 lbs Note: The above weights are for the Turf AerWay complete with EMPTY ballast tank. These are shipping weights only. These weights may vary depending on the configuration of the Turf AerWay. 21

The Greens Express smoothing roller option allows the operator to lift the roller completely off the ground to leave the aeration holes open, or adjust tine penetration in less than one inch increments, or support the tines roller completely out of the ground for use exclusively as a smoothing roller. AerWay Greens Express: Part # s: XA-69719 (for 45 AerWay) 174 lbs XA-69585 (for 60 AerWay) 206 lbs XA-69720 (for 75 AerWay) 231 lbs XA-69721 (for 90 AerWay) 260 lbs AerWay Shown with Greens Express Smoothing Roller Electric / Hydraulic Power Pack Part # AK-76000-02 Shipping Weight: 246 lbs. For tractors that are not equipped with hydraulic outlets a power pack can be added to pull type Turf AerWay s to provide hydraulic lift ability. The controls give power up and power down operation. The power pack includes 12v motor, pump, reservoir and an umbilical cord to reach the tractor and provide up and down push button control. The power pack is supplied without battery and without oil. (Power Pack will take up to two batteries) All components are enclosed in a weather resistant enclosure. The power pack bolts to the tongue and has couplers to connect to the quick disconnects on the hydraulic hoses. 22

Features and Options: OPTION: THE GREENS EXPRESS SMOOTHING ROLLER Used in conjunction with the Finetine, Sportstine or Super Finetine. Used primarily for golf greens. Will not disrupt play and can be used as a roller only Part number: Various, depending on the size of your AerWay. See page 22 FEATURE: THE LIQUID BALLAST TANK Standard on all AerWay Turf units. Provides an easy way to ballast the AerWay for superior ground penetration. Part numbers: AK-68268-45 for 45 unit AK-68268-60 for 60 unit AK-68268-75 for 75 unit AK-68268-90 for 90 unit OPTION: ELECTRIC/HYDRAULIC POWER PACK Can be added to any AerWay pulltype frame for use with power units that are not equipped with remote hydraulic outlets. Operated with a switch from the operator s seat. Part number: AK-76000-02 OPTION: Any tine roller can be ordered separately to fit any turf model. Same sized rollers are interchangeable on the same sized AerWay. See page 22 OPTION: SINGLE OR TWO ROLLER MODELS Available on 60, 75 and 90 models. 23

Advanced Aeration Systems For a dealer nearest you, please call 800-457-8310 AerWay is manufactured by SAF-HOLLAND Canada, Limited www.aerway.com 03082013 Rev. 9 March 8, 2013