PLANTING COMPONENTS CATALOG

Transcription

1 PLANTING COMPONENTS CATALOG

2 GREAT PLAINS PRODUCT LINES Yield-Pro Planters Vertical Tillage Conventional Tillage HD Drills Air Drills Compact Drills Min-Till Drills CONTENTS 03 VANTAGE II FERTILIZER COULTER 04 VANTAGE I FERTILIZER COULTER 05 VANTAGE I-20 FERTILIZER COULTER 06 HD UNIT MOUNT CONSERVATION COULTER 07 ZONE COULTER 08 HD UTILITY COULTER 09 TERRA-TINE ROW CLEANER 10 COIL TINE CONVERSION KITS 11 FLAT FOLD MARKERS 12 PLANTER SEED-LOK 13 THE ELIMINATOR MOUNTING ACCESSORIES 16 GREAT PLAINS PLANT LOCATIONS No-Till Drills Sprayers Fertilizer Applicators Planting Components

3 Vantage II Fertilizer Coulter 3 Vantage II Fertilizer Coulter Available to fit virtually any planter or toolbar! Can be used for liquid or dry fertilizer Designed for fertilizer application in no-till, minimum-till, and conventional planting conditions Eliminates constant plugging and adjustments Increased down pressure pounds pre-load pounds maximum Spring-loaded wiper wheel Arm pivot utilizes hub assembly with tapered roller bearings Heavy-duty 18" smooth coulter blade Heavy-duty casting and spring assembly Heavy-duty greaseable hub Double-lipped grease seal VANTAGE II FERTILIZER COULTER (base unit) L Vantage II Fertilizer Coulter RH 93 lbs L Vantage II Fertilizer Coulter LH 93 lbs C Vantage II Liquid Insert 1 lb. Note: Price of clamp kits and shanks are not included in base unit; Order one of each to complete coulter. MOUNTING CLAMP KITS K Fits 2.5" X 2.5" square bar 6 lbs K Fits 3" X 3" square bar 6 lbs K Fits 4" X 4" square bar 8 lbs K Fits 2" w X 6" h bar 13 lbs K Fits 7" X 7" square bar 11 lbs K Fits 3" X 3" diamond bar 16 lbs K Fits 3.5" X 3.5" diamond bar 18 lbs K Fits 6" w X 4" h bar 8 lbs K Fits 5" w X 7" h bar 11 lbs K Fits 3" w X 7" h bar 10 lbs K Fits 3" w X 4" h bar 9 lbs K Fits 3" w X 6" h bar 9 lbs. SHANK LENGTH C 21" Flat Shank 19 lbs. Also can be used as a 16 angle mount for toolbars C Angled Coulter Shank 21 lbs C* Vantage II 5" Offset Flat Shank - RH 14 lbs C* Vantage II 5" Offset Flat Shank - LH 14 lbs. *Note: For use on White front fold planters. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

4 4 Vantage I Fertilizer Coulter Vantage I Fertilizer Coulter Available to fit virtually any planter or toolbar! For low pressure fertilizer injection Increased down pressure pounds pre-load pounds maximum Heavy-duty swivel casting and spring assembly Heavy-duty greaseable hub Double-lipped grease seal Tapered roller bearings Swivel capability Steel swivel limit collar Non-plugging coil tine applicator Stainless steel nozzle assembly Can be used with any type of pump On-row or off-row application Can be used in conjuction with Great Plains Terra-Tine SHANK LENGTH D 1-1/2" X 26" Straight Shank 13 lbs D 1-1/2" X 12-5/8" Straight Shank 6 lbs D 1-1/2" X 16" Straight Shank 8 lbs D 1-1/2" X 22" Straight Shank 11 lbs D 1-1/2" X 14" Straight Shank 7 lbs C 1-1/2" X 22" - 5" Offset Shank 13 lbs C 1-1/2" X 26" - 5" Offset Shank 15 lbs C 1-1/2" X 22" - 7" Offset Shank 17 lbs. VANTAGE I FERTILIZER COULTER CONVERSION KITS K Vantage I RH Liq. Fertilizer (Rod Style) 16 lbs K Vantage I LH Liq. Fertilizer (Rod Style) 16 lbs. VANTAGE I FERTILIZER COULTER (base unit) L Vantage I Fertilizer Coulter RH 60 lbs L Vantage I Fertilizer Coulter LH 60 lbs K YP Front Row Zone Coulter LH - 15" 44 lbs K YP Front Row Zone Coulter RH - 15" 44 lbs. Note: To add Terra-Tine, see page 9. Order nozzles separately on page 15. Price of blades, clamp kits, shanks, and nozzles are not included in base unit; Order one of each to complete coulter. COULTER BLADES C Narrow Fluted Blade - 17" 9 lbs C 3/4" 12 Wave Blade - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 18" 14 lbs C 3/4" Wave Coulter Blade - 18" 14 lbs. MOUNTING CLAMP KITS K Fits 2.5" X 2.5" square bar 9 lbs K Fits 2" w X 6" h bar 12 lbs K Fits 3" X 3" diamond bar 16 lbs K Fits 3.5" X 3.5" diamond bar 17 lbs K Fits 4" X 4" square bar 11 lbs K Fits 3" w X 7" h bar 13 lbs K Fits 5" w X 7" h bar 14 lbs K Fits 7" X 7" square bar 14 lbs K Fits 3" w X 4" h bar 10 lbs K Fits 6" w X 4" h bar 11 lbs K Fits 2" w X 4" h bar 10 lbs K Fits 3" X 3" square bar 9 lbs K Fits 3" w X 6" h bar 12 lbs K Fits 4" w X 6" h bar 20 lbs K Fits 3" w X 5" h bar 11 lbs. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

5 Vantage I-20 Fertilizer Coulter 5 Vantage I-20 Fertilizer Coulter Available to fit virtually any toolbar! Fits fertilizer toolbars. Not recommended for planters. For low pressure fertilizer injection Stainless steel nozzle assembly Heavy-duty 20" design for application Can be used with any type of pump of liquid fertilizer for toolbars Increased down pressure pounds pre-load pounds maximum Heavy-duty swivel casting and spring assembly Heavy-duty greaseable hub Double-lipped grease seal Tapered roller bearings Swivel capability Steel swivel limit collar Non-plugging coil tine applicator - Eliminates troublesome knife SHANK LENGTH D 1-1/2" X 26" Straight Shank 13 lbs D 1-1/2" X 22" Straight Shank 11 lbs D 1-1/2" X 14'' Straight Shank 7 lbs C 1-1/2" X 22" - 5" Offset Shank 13 lbs C 1-1/2" X 26" - 5" Offset Shank 15 lbs C 1-1/2" X 22" - 7" Offset Shank 17 lbs. VANTAGE I FERTILIZER COULTER CONVERSION KITS K Vantage I 20" Fertilizer LH (Rod Style) 10 lbs K Vantage I 20" Fertilizer RH (Rod Style) 10 lbs K Vantage I 20" Fertilizer Tine LH 15 lbs K Vantage I 20" Fertilizer Tine RH 15 lbs. VANTAGE I-20 FERTILIZER COULTER (base unit) L Heavy-Duty Utility Coulter LH only 41 lbs L Heavy-Duty Utility Coulter RH only 41 lbs K NP Coulter Assembly RH 41 lbs K NP Coulter Assembly LH 41 lbs S Vantage I-20 Flat Bar Coulter Assembly RH only 41 lbs. Note: To add Terra-Tine, see page 9. Order nozzles separately on page 15. Price of blades, clamp kits, shanks, and nozzles are not included in base unit; Order one of each to complete coulter. COULTER BLADES C Narrow Fluted Blade - 20" 15 lbs C 1" 13 Wave Blade - 20" 17 lbs C 5/8" Turbo Coulter Blade (Patented) - 20" 17 lbs. MOUNTING CLAMP KITS K Fits 2.5" X 2.5" square bar 9 lbs K Fits 2" w X 6" h bar 12 lbs K Fits 3" X 3" diamond bar 16 lbs K Fits 3.5" X 3.5" diamond bar 17 lbs K Fits 4" X 4" square bar 11 lbs K Fits 3" w X 7" h bar 13 lbs K Fits 5" w X 7" h bar 14 lbs K Fits 7" X 7" square bar 14 lbs K Fits 3" w X 4" h bar 10 lbs K Fits 6" w X 4" h bar 11 lbs K Fits 2" w X 4" h bar 10 lbs K Fits 3" X 3" square bar 9 lbs K Fits 3" w X 6" h bar 12 lbs. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

6 6 HD Unit Mount Conserv. Coulter HD Unit Mount Conservation Coulter Mounts on planter unit for conservation to no-till Fits John Deere, White 6100, and Kinze planters Available in right- and left-hand models Unique cam adjustment for depth control Heavy-duty greaseable hub Double-lipped grease seal Tapered roller bearings UNIT MOUNT COULTER (base unit) K UMC Assembly - Fits Great Plains 25 Series (15") 27 lbs K UMC Assembly - Fits Great Plains 30 Series (15") 40 lbs L RH - Fits Great Plains (Except YP), John Deere MaxEmerge / MaxEmerge Plus 45 lbs L RH - Fits John Deere 7000, 7100, Kinze and White lbs L LH - Fits John Deere 7000, 7100, Kinze and White lbs L LH - Fits Great Plains (Except YP), John Deere MaxEmerge / MaxEmerge Plus 45 lbs. Note: Price of blades and spring packages are not included in base unit; Order one of each to complete coulter. COULTER BLADES C Narrow Fluted Blade - 17" 9 lbs C 3/4" 12 Wave Blade - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 16" 11 lbs C Coulter Blade (Fluted) - 16" 8 lbs C Coulter Blade (Turbo) - 15" 11 lbs C Coulter Blade (Fluted) - 15" 7 lbs. Turbo Coulter 3/4" X 17" 12 Flutes 5/8" X 17" 24 Flutes 5/16" X 17" 50 Flutes SPRING PACKAGE K* Spring Package - Fits John Deere 7000, 7100 and Kinze 30 lbs K Spring Package - Fits John Deere 7200, lbs. *Note: Spring package adds up to 300 pounds of additional down pressure and is required in most no-till conditions. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

7 Zone Coulter 7 Zone Coulter Available to fit virtually any planter or toolbar! Available in right- and left-hand coulter Increased down pressure pounds pre-load pounds maximum Heavy-duty swivel casting and spring assembly Heavy-duty greaseable hub Double-lipped grease seal Tapered roller bearings Swivel capability Steel swivel limit collar Easily converts to a Vantage I ZONE COULTER (base unit) K Zone Coulter RH 44 lbs K Zone Coulter LH 44 lbs K 15" Short Zone Till Coulter LH 46 lbs K 15" Short Zone Till Coulter RH 46 lbs K YP Front Row Zone Coulter LH - 15" 44 lbs K YP Front Row Zone Coulter RH - 15" 44 lbs. Note: Price of blades, clamp kits, and shanks are not included in base unit; Order one of each to complete coulter. For nozzles, see page 15. COULTER BLADES C Narrow Fluted Blade - 17" 9 lbs C 3/4" 12 Wave Blade - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 16" 11 lbs C 5/8" Turbo Coulter Blade (Patented) - 18" 14 lbs C 3/4" Wave Coulter Blade - 18" 14 lbs C Coulter Blade (Fluted) - 16" 8 lbs C Coulter Blade (Turbo) - 15" 11 lbs C Coulter Blade (Fluted) - 15" 7 lbs. MOUNTING CLAMP KITS K Fits 2.5" X 2.5" square bar 9 lbs K Fits 2" w X 6" h bar 12 lbs K Fits 3" X 3" diamond bar 16 lbs K Fits 3.5" X 3.5" diamond bar 17 lbs K Fits 4" X 4" square bar 11 lbs K Fits 3" w X 7" h bar 13 lbs K Fits 5" w X 7" h bar 14 lbs K Fits 7" X 7" square bar 14 lbs K Fits 3" w X 4" h bar 10 lbs K Fits 6" w X 4" h bar 11 lbs K Fits 2" w X 4" h bar 10 lbs K Fits 3" X 3" square bar 9 lbs K Fits 3" w X 6" h bar 12 lbs K Fits 4" w X 6" h bar 20 lbs K Fits 3" w X 5" h bar 11 lbs. SHANK LENGTH C 1-1/2" X 22" - 5" Offset Shank 13 lbs C 1-1/2" X 26" - 5" Offset Shank 15 lbs C 1-1/2" X 22" - 7" Offset Shank 17 lbs D 1-1/2" X 12-5/8" Straight Shank 6 lbs D 1-1/2" X 16" Straight Shank 8 lbs D 1-1/2" X 22" Straight Shank 11 lbs D 1-1/2" X 14" Straight Shank 7 lbs. ZONE COULTER TO VANTAGE I CONVERSION KIT K Bolt-On Fertilizer Tine Kit RH 19 lbs K Fert Drop Extn (Clamp) RH 16 lbs K Bolt-On Fertilizer Tine Kit LH 19 lbs K Fert Drop Extn (Clamp) LH 16 lbs K Vantage I LH Liquid Fertilizer (Rod Style) 6 lbs K Vantage I RH Liquid Fertilizer (Rod Style) 6 lbs K Vantage I Liquid Fertilizer Std Coulter 15" LH 10 lbs K Vantage I Liquid Fertilizer Std Coulter 15" RH 10 lbs. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

8 8 HD Utility Coulter Heavy-Duty Utility Coulter Available to fit virtually any toolbar! Available in right-hand coulter only Increased down pressure pounds pre-load pounds maximum Heavy-duty swivel casting and spring assembly Heavy-duty greaseable hub Double-lipped grease seal Tapered roller bearings Swivel capability Steel swivel limit collar Fits 15", 16", 17", 18", or 20" coulter blades 20" blade 23" SHANK LENGTH C 1-1/2" X 22" - 5" Offset Shank 13 lbs C 1-1/2" X 26" - 5" Offset Shank 15 lbs C 1-1/2" X 22" - 7" Offset Shank 17 lbs D 1-1/2" X 12-5/8" Straight Shank 6 lbs D 1-1/2" X 16" Straight Shank 8 lbs D 1-1/2" X 22" Straight Shank 11 lbs D 1-1/2" X 14" Straight Shank 7 lbs. UTILITY COULTER TO VANTAGE I-20 CONVERSION KIT Rod Style K Vantage I 20" Fertilizer LH (Rod Style) 10 lbs K Vantage I 20" Fertilizer RH (Rod Style) 10 lbs K Vantage I 20" Fertilizer Tine LH 15 lbs K Vantage I 20" Fertilizer Tine RH 15 lbs K Fert Drop Extn Kit (Clamp) RH 16 lbs. For nozzles, see page 15. HEAVY-DUTY UTILITY COULTER (base unit) Note: Price of blades, clamp kits and shanks are not included in base unit. Order one of each to complete coulter L Heavy-Duty Utility Coulter LH only 41 lbs L Heavy-Duty Utility Coulter RH only 41 lbs S Vantage I-20 Flat Bar Coulter Assembly RH only 41 lbs. COULTER BLADES C Narrow Fluted Blade - 17" 9 lbs C Narrow Fluted Blade - 20" 15 lbs C 3/4" 12 Wave Blade - 17" 12 lbs C 1" 13 Wave Blade - 20" 17 lbs C 5/8" Turbo Coulter Blade (Patented) - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 20" 17 lbs C 5/8" Turbo Coulter Blade (Patented) - 16" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 18" 14 lbs C Coulter Blade (Fluted) - 16" 8 lbs C Coulter Blade (Turbo) - 15" 11 lbs C Coulter Blade (Fluted) - 15" 7 lbs. MOUNTING CLAMP KITS K Fits 2.5" X 2.5" square bar 9 lbs K Fits 2" w X 6" h bar 12 lbs K Fits 3" X 3" diamond bar 16 lbs K Fits 3.5" X 3.5" diamond bar 17 lbs K Fits 4" X 4" square bar 11 lbs K Fits 3" w X 7" h bar 13 lbs K Fits 5" w X 7" h bar 14 lbs K Fits 7" X 7" square bar 14 lbs K Fits 3" w X 4" h bar 10 lbs K Fits 6" w X 4" h bar 11 lbs K Fits 2" w X 4" h bar 10 lbs K Fits 3" X 3" square bar 9 lbs K Fits 3" w X 6" h bar 12 lbs K Fits 4" w X 6" h bar 20 lbs K Fits 3" w X 5" h bar 11 lbs. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

9 Terra-Tine Row Cleaner 9 Terra-Tine Row Cleaner Frame Mount Works in conjunction with Fertilizer Coulter or can be mounted by itself on the planter fertilizer bar Fits the Ausherman GP Vantage I, Zone Coulter, and Yetter 2975 Fertilizer Coulter Clears a 7" to 9" path in front of row Floating-arm design with adjustable spring pressure 15" and 16" diameter wheel Replaceable spring steel tine Frame-mount Terra-Tine fits 5" X 7" or 7" X 7" bar 4-11/32" 24-1/4" Double Terra-Tine This illustration shows possible combinations of the Terra-Tine, with a Vantage I and a Unit Mount Coulter TERRA-TINE H* Double Shank Weldment 35 lbs A 16" RH - Mounts w/ existing fertilizer coulter on 1-1/2" round shank 35 lbs A 16" LH - Mounts w/ existing fertilizer coulter on 1-1/2" round shank 35 lbs A 15" RH - 5" w X 7" h frame mount 35 lbs A 15" LH - 5" w X 7" h frame mount 35 lbs A 15" RH - 7" X 7" frame mount 35 lbs A 15" LH - 7" X 7" frame mount 35 lbs L 15" RH - Mounts w/ existing fertilizer coulter on 1-1/2" round shank 35 lbs L 15" LH - Mounts w/ existing fertilizer coulter on 1-1/2" round shank 35 lbs L Double Terra-Tine Assembly 66 lbs L 15" Short LH - Terra-Tine Assembly 36 lbs L 15" Short RH - Terra-Tine Assembly 36 lbs S 16" Nutri-Pro Double Terra-Tine Assembly 42 lbs. *Note: H shank used for S and Vantage I-20 coulter combination. Note: To mount Terra-Tine on the fertilizer bar by itself, order a standard 1-1/2" round shank and clamp kit for each row cleaner. Choose from clamp kits listed on page 5. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

10 10 Coil Tine Conversion Kits Coil Tine Conversion Kits Converts Great Plains No-Till Coulter For low pressure fertilizer injection Converts most standard coulters Non-plugging coil tine applicator - Eliminates troublesome knife Stainless steel nozzle assembly Can be used with any type of pump For best results, use with a 5/8" or wider blade UTILITY COULTER TO VANTAGE I-20 CONVERSION KIT K Vantage I 20" Fertilizer LH (Rod Style) 10 lbs K Vantage I 20" Fertilizer RH (Rod Style) 10 lbs K Vantage I 20" Fertilizer Tine LH 15 lbs K Vantage I 20" Fertilizer Tine RH 15 lbs K Fert Drop Extn Kit (Clamp) RH 16 lbs. COIL TINE CONVERSION KIT - FOR LIQUID FERTILIZER APPLICATION A Liquid Fert Arm 6 lbs K Fert Drop Extn Kit (Clamp) RH 16 lbs K Coil Tine RH only - Liquid Fertilizer 13 lbs K Vantage I 20" Fertilizer LH (Rod Style) 10 lbs K Vantage I 20" Fertilizer Tine LH 15 lbs K Coil Tine LH - Anhydrous 18 lbs K Coil Tine RH - Anhydrous 18 lbs K Vantage I 20" Fertilizer Tine RH 15 lbs K Vantage I 20" Fertilizer RH (Rod Style) 10 lbs K Vantage I LH Liquid Fertilizer (Rod Style) 6 lbs K Vantage I RH Liquid Fertilizer (Rod Style) 6 lbs K Clamp-on Liquid Fertilizer Bun 7 lbs K Vantage I LH Liquid Fertilizer 15" Coulter 10 lbs K Vantage I RH Liquid Fertilizer 15" Coulter 10 lbs K Vantage I Liquid Fertilizer Std Coulter 15" LH 10 lbs K Vantage I Liquid Fertilizer Std Coulter 15" RH 10 lbs. Converts Yetter 2975 Series Fertilizer Coulter to the Coil Tine injection system For low pressure fertilizer injection Reduce plugging and constant adjustment Non-plugging coil tine applicator Stainless steel nozzle assembly Can be used with any type of pump For best results, use with a 5/8" or wider blade YETTER COIL TINE CONVERSION KIT - FOR LIQUID FERTILIZER APPLICATION A Yetter Coil Tine Conversion Kit - LH 12 lbs A Yetter Coil Tine Conversion Kit - RH 12 lbs K Fert Drop Extn Kit (Clamp) RH 16 lbs K Fert Drop Extn Kit (Clamp) LH 16 lbs. RH shown For nozzles, see page 15. If space is restricted for mounting units on toolbar, see page 14 for extension brackets.

11 Flat Fold Markers 11 Flat Fold Markers Rugged field-proven design Hydraulic hoses, fittings, and sequence valve included Break-away design prevents damage Heavy-duty disk assembly Tapered roller bearings Notched blade Bolt-on depth band FLAT FOLD MARKERS Part No. Description A 15' Dual Flat Fold Markers - John Deere 750/1560/ A 20' Dual Flat Fold Markers - John Deere 750/1560/ A 25' Dual Flat Fold Markers - John Deere A 30' Dual Flat Fold Markers - John Deere 750/1560/ A 30' Dual Flat Fold Markers - John Deere 455

12 12 Planter Seed-Lok Planter Seed-Lok More uniform depth control Unmatched seed-to-soil contact Non-stick poly wheel 6" diameter wheel Fits John Deere-7000, 7100, 7200, 7300, White-6100, 5100, Kinze-1993 and older Will fit with depthomatic Seed-Lok Tie Up: A cable tie-up system with an adjustable clevis to lift the Seed-Lok off the ground in extremely wet conditions PLANTER SEED-LOK A Seed-Lok Assembly for John Deere 7000, 7100, and Kinze 6 lbs A* Seed-Lok Assembly for John Deere 7200 and lbs K Lock-Up Kit for John Deere 7000, 7100, 7200, 7300, and Kinze 1 lb. *Note: Slight modification of the rotary scraper is required when installing on John Deere 7200 and 7300

13 The Eliminator 13 The Eliminator Eliminate Shims...Mud Buildup...Arm Wear Unique split-arm design Hardened side-depth arm Dual O ring bushing Case hardened eccentric bushing Positive lock adjuster Available to fit Great Plains, John Deere, and Kinze row units The last planter side-depth arm you will ever buy with all the adjustments you will ever need. By utilizing our unique split-arm design, the Eliminator from Great Plains far surpasses our competition. Our revolutionary design allows you quick and easy adjustment of the planter side-depth arm. All adjustments are made without removing the arm or contact with greasy shims. THE ELIMINATOR Part No. Description A Great Plains Planter with 5/8 attachment bolt (1998) A Kinze Planter with 5/8 attachment bolt A Great Plains Planter with 3/4 attachment bolt ( ) A John Deere Planter with set screw wheel attachment & small pivot bolt (used on MaxEmerge/MaxEmerge 2 ser. # & up) A Kinze Planter with set screw attachment A John Deere Planter with set screw wheel attachment (used on MaxEmerge Plus 1997 & above) A John Deere Planter with set screw wheel attachment (used on MaxEmerge Planters ser. # & below) K Rebuild Kit: Includes two O ring bushings & four O rings A John Deere MaxEmerge XP Arm Kit

14 14 Mounting Accessories EXTENSION BRACKETS & REINFORCEMENT BRACKETS A 7" X 7" Mainframe Extension Kit 31 lbs K Reinforcement Bracket John Deere 7000 (7" w X 5" h and 7" X 7" frame) 18 lbs K 10" Extn. Bracket - Fits 3" X 3" diamond bar Liquid Fertilizer 18 lbs K 10" Extn. Bracket - Fits 3" X 3" diamond bar Dry Fertilizer 33 lbs K Kinze 5-1/2" Coulter Extn. Left Hand 25 lbs K Kinze 5-1/2" Coulter Extn. Right Hand 25 lbs K Kinze 9-1/2" Coulter Extn. Left Hand 32 lbs K Kinze 9-1/2" Coulter Extn. Right Hand 32 lbs K 15-1/2" Front Bar Extn. Bracket Kit Right Hand 27 lbs K 15-1/2" Front Bar Extn. Bracket Kit Left Hand 31 lbs K 14-5/8" Front Bar Extn. Bracket Kit 18 lbs K 26" Front Bar Extn. Bracket Kit 19 lbs K 31-1/2" Front Bar Extn. Bracket Kit 19 lbs K Telescoping Bracket Kit 53 lbs S 9-1/2" Front Bar Extn. Bracket Kit 15 lbs. FRONT BAR MOUNTING KITS K Front Bar Kit (10" Extn.) - Case IH , 4-row 149 lbs K Front Bar Kit (10" Extn.) - Case IH , 6-row 222 lbs K Front Bar Mount Kit, 8-row 300 lbs K Front Bar Mount Kit, 8-row and 12-row 340 lbs K Case IH , 8-row and 12-row narrow 3-point 396 lbs. MOUNTING CLAMP KIT - FOR 1-1/2" ROUND SHANK K Fits 2.5" X 2.5" square bar 9 lbs K Fits 2" w X 6" h bar 12 lbs K Fits 3" X 3" diamond bar 16 lbs K Fits 3.5" X 3.5" diamond bar 17 lbs K Fits 4" X 4" square bar 11 lbs K Fits 3" w X 7" h bar 13 lbs K Fits 5" w X 7" h bar 14 lbs K Fits 7" X 7" square bar 14 lbs K Fits 3" w X 4" h bar 10 lbs K Fits 6" w X 4" h bar 11 lbs K Fits 2" w X 4" h bar 10 lbs K Fits 3" X 3" square bar 9 lbs K Fits 3" w X 6" h bar 12 lbs K Fits 4" w X 6" h bar 20 lbs K Fits 3" w X 5" h bar 11 lbs. MOUNTING CLAMP KIT - FOR FLAT SHANK K Fits 2.5" X 2.5" square bar 6 lbs K Fits 3" X 3" square bar 6 lbs K Fits 4" X 4" square bar 8 lbs K Fits 2" w X 6" h bar 13 lbs K Fits 7" X 7" square bar 11 lbs K Fits 3" X 3" diamond bar 16 lbs K Fits 3.5" X 3.5" diamond bar 18 lbs K Fits 6" w X 4" h bar 8 lbs K Fits 5" w X 7" h bar 11 lbs K Fits 3" w X 7" h flat bar 11 lbs K Fits 3" w X 4" h bar 9 lbs K Fits 3" w X 6" h bar 9 lbs K Fits 4" w X 7" h flat shank bar 20 lbs K Fits 2-1/4" X 2-1/4" diamond bar 20 lbs. MOUNTING SHANKS C 21" Flat Shank - 16 angled mount for toolbar application 19 lbs C Angled Coulter Shank 21 lbs C 1-1/2" X 22" - 5" Offset Shank 13 lbs C 1-1/2" X 26" - 5" Offset Shank 15 lbs C 1-1/2" X 22" - 7" Offset Shank 17 lbs D 1-1/2" X 12-5/8" Straight Shank 6 lbs D 1-1/2" X 16" Straight Shank 8 lbs D 1-1/2" X 22" Straight Shank 11 lbs H Double Shank Weldment 35 lbs D 1-1/2" X 26" Straight Shank 13 lbs H 1-1/2" X 30" X 5" Offset Shank (For use with YP425A,YP625A, & YP825A) 17 lbs.

15 Mounting Accessories 15 COULTER BLADES C Narrow Fluted Blade - 17" 9 lbs C Narrow Fluted Blade - 20" 15 lbs C 3/4" 12 Wave Blade - 17" 12 lbs C 18" Coulter Blade for Vantage II Fertilizer Coulter 17 lbs C 1" 13 Wave Blade - 20" 17 lbs C 5/8" 24 Wave Blade - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 17" 12 lbs C 5/8" Turbo Coulter Blade (Patented) - 20" 17 lbs C 5/8" Turbo Coulter Blade (Patented) for John Deere 5 Hole - 16" 11 lbs C 5/8" Turbo Coulter Blade (Patented) for John Deere and Kinze 6 Hole - 16" 11 lbs C 5/8" Turbo Coulter Blade (Patented) - 16" 11 lbs C 5/8" Turbo Coulter Blade (Patented) - 18" 14 lbs C 3/4" Wave Blade 14 lbs C 5/8" Turbo Coulter Blade (Patented) for John Deere 6 Hole - 16" 11 lbs C Coulter Blade (Fluted) - 16" 8 lbs C Coulter Blade (Turbo) - 15" 11 lbs C Coulter Blade (Fluted) - 15" 7 lbs C Coulter Blade Rawson (Turbo) - 17" 12 lbs. Turbo Coulter 3/4" X 17" 12 Flutes NOZZLES Part No. Description C Nozzle C Nozzle C Nozzle C Nozzle recommended for Squeeze Pumps C Nozzle C Nozzle C Nozzle /8" X 17" 24 Flutes 5/16" X 17" 50 Flutes

16 Great Plains Locations SALINA CAMPUS SALINA, KS ELLSWORTH PLANT ELLSWORTH, KANSAS TIPTON PLANT TIPTON, KANSAS PRODUCT DEVELOPMENT ASSARIA, KANSAS CORPORATE OFFICE SALINA, KANSAS Great Plains reserves the right to vary specifications with or without notice at such times in such manner as deemed appropriate. Major as well as minor changes may be involved. Every effort, however, is made to ensure the accuracy of the particulars contained in this brochure. Consult your dealer for details regarding the specifications of any product. All sales are made by the Distributor or Dealer subject to and with the benefit of the standard Conditions of Sale and Warranty provided by the Distributor or Dealer, copies of which may be obtained upon request. Great Plains Manufacturing, Incorporated 1525 E. North Street P.O. Box 5060 Salina, KS PHONE: FAX: GREAT PLAINS MFG., INC GPM