K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working load: 845 N (190 lbf) Operating temperature range: -40ºC (-40ºF) to 80ºC (175ºF) Installation Install assembly with Ø 4 (.7) rivets or M4 (No. 8) screws (not (optional) 33.5 (1.3) 19.1 (.75) 6.4 (.5) Ø 4.5 (.18) places 1.3 (.05) 19 (.73) 48 (1.89) 17 (.65) Ø 4. (.167) places 31 (1.0) 4 (.94) 5 (.04) 1 55 (.17) Spring loaded: up to 1.7 (.07) for mounting hole gasket set. lso provides an additional allowance of.3 deflection when loaded. Fixed (optional) Ø 4.5 (.18) Places 1.6 (.06) Ø 4.±0.1 (.167±.004) Places 1.6±0.1 (.496±.004) 6.3±0.1 (.48±.004) 33.5 (1.3) 19.1 (.75) S 19.1±0.1 (.75±.004) 6.4 (.5) 1.3 (.05) 18 (.71) 47 (1.85) Ø 4.5±0.1 (.177±.004) Places Latch S Style Steel, Black Powder Coated Stainless Steel +1.7 Spring loaded K-3005-89 K-3005-51 3 (1.5 ) Fixed K-3001-89 K-3001-51 3±0. (1.5±.01) K4-3-89 K4-3-51-0. +.07 -.01 www.southco.com/k
K3 Draw Latch 3 Rotary Small Hinge Lock djustable grip Low Profile 8.7 (1.13) 37 (1.44) 41.4 (1.63) Long Slide 13 (.50) (shown engaged) Slide 55 (.16) Hinge Lock 3.8 +0.1-0.1 (.937) 1 +0.1-0. Long Slide 1 +0.1-0. 43 49 (1.678) 30 (1.98) (1.195) 19 (.750) (.130) Ø 3.3 (4 places) Material Steel Stainless Steel Optional keeper ±0.8 46±0.8 (1.55 ±.03) (1.80 ±.03) (.58 ) 33 (1.9) Optional keeper SIZE CTUL 1 (.83) (.69) 11 (.4) Ø 3.5 (.136) (.) 1 57 14. (.56).5 (.10) +0.1 3.8-0.1 (.937) 41.4 43 (1.63) (1.697) 16 (.63) 19 (.750) 9.7 Ø(.) 3.3 (.130) 8 (1.10±.03) (4 places) 1 (.49 ) 30 (1.19) (.4) Hinge lock style integrally has an attached keeper (.69) 8.7 (1.13) 3 (1.7) 19.5 (.77) 37 (1.44) 1 69±0.8 (.70±.03) 6.5±0.8 (.46±.03) 8 (1.10±.03) 14. with Ø 3 (.) Install assembly 7.1 or M3(.56) rivets (No. 4) screws (not (.8) Short nchor Plate 13 (.50) 4 (.94) (.69) 16 (.63) 11 (.4) CTUL SIZE9.7 37 (1.44) Installation.5 (.10) 43 49 (1.678) (1.98) (.58) 33 (1.9) Stainless steel or steel, zinc d 1 (.83) (.69) Optional keeper 3 (1.7) 19.5 (.77) 68±0.8 (.69±.03) 6±0.8 (.44±.03) Low Profile 7.1 (.8) Short nchor Plate 14. (.56) Ø 3.5 (.136) 1 57 (.4) Ø 3.3 (.13) 14. (.56) Latch 3.8 +0.1-0.1 (.937) 3.5 (1.81) 11.1 (.437) Hinge Lock Long Slide Low Profile Short nchor Plate Low Profile K3-1746-07 ~ K3-347-07 K3-347-5 K3-694-07 ~ K3-1660-07 K3-1660-5 K3-0334-07 K3-0334-5 K3-696-07 ~ www.southco.com/k3
4 K3 Draw Latch Rotary Small Stainless steel or steel, zinc d Installation Install assembly with Ø 3 (.) rivets or M3 (No. 4) screws (not Spring loaded: up to 4 (.6) for mounting hole gasket set. Riveted 46.5±0.8 (1.83±.03) 5±0.8 (.08±.03) 4 (.94) (.69) (.58) 33 (1.9) (1.5) 13 (.50) 37 (1.44) 1 46±0.8 (1.8±.03) 53±0.8 (.07±.03) CTUL SIZE 4 (.94) (.69) 49 (1.93) 33 (.58 ) (1.9) (1.5) Padlockable (.69) 4 (.94) Kick-Out Spring (.69) 4 (.94) 51±0.8 (.0±.03) 58±0.8 (.7±.03) 1 4 (.9) 7 (1.063) 46.5±0.8 (1.83±.03) 5±0.8 (.08±.03) Kick-out spring lifts latch when open for clearance of keeper Ø9.5 (.) 44 (1.53) 4 (.94) 19 (.750) Ø 3.3 (.130) (4 places) (.58 ) Optional keeper Internal kick-out spring shown 14 (.53) Material Riveted Padlockable Kick-Out Spring Steel K3-165-07 K3-1735-07 K3-403-07 K3-1887-07 K3-0334-07 Stainless Steel K3-165-5 K3-1735-5 K3-403-5 K3-1887-5 K3-0334-5 www.southco.com/k3
K4 Draw Latch Rotary Medium 5 Riveted 4 (.95) 54±1.5 (.11±.06) 61±1.5 (.4±.06) 4 (.95) 54±1.5 (.11±.06) 61±1.5 (.4±.06) 33 (1.31) 56 (.19) (1.54±.03) 33 (1.31) 56 (.19) 64 (.51) (1.54) 17 (.68) 0 (.79±.03) 17 (.68) 0 (.79±.03) 17 (.65) +0.1-0. 1.7 (.500±.004) 9 (1.13) 6.4 (.5) 6.4 (.5) 8.5±0. (1. ±.008) Steel, zinc d Installation Install assembly with Ø 4 (.7) rivets or M4 (No. 8) screws (not Spring loaded: up to 4 (.6) for mounting hole gasket set. Key Lockable 61±1.5 (.4±.06) 4 (.95) 54±1.5 (.11±.06) Ø 4.±0.1 (.167±.004) (5 Places) 16±0.1 (.65±.004) 14±0.1 (.563±.004) 8 (.31) 17 (.68) 33 (1.31) 56 (.19) 64 (.51) 56 (.19) 0 (79±.03) Type Riveted Latch K4-714-07 Spring loaded K4-359-07 K4-3-07 Key lockable K4-833-07 www.southco.com/k4
6 K5 Draw Latch Rotary Large Stainless steel or steel, zinc d Installation Install assembly with Ø 5 (3/16) rivets or M5 (No. 10) screws (not Spring loaded and low profile: up to 4 (.16) for mounting hole gasket set. Riveted (hex cam shown) Low Profile (flat cam shown) (3.79±.06) (3.43±.06) 1 51 (.00) (flat cam shown) (3.43±.06) (3.43±.06) (3.79±.06) (3.79±.06) Material Slide 1.7 (.88) (3.43±.06) (3.79±.06) 41.5 (1.63) 70 (.75) 8 (1.10) 41 (1.6) 70 (.75) 83 (3.5) 41 41 (1.6) (1.6) 70 (.75) 70 (.75) 83 (3.5) 83 (3.5) Riveted Hex Cam 37.5 (1.48) 14.0 (.55) Flat (.88) (.88) 1 (.83) Hex 17 (.67) Flat Riveted Flat Cam 10.5 10.5(.41) (.41) Hex cam or Hex cam flat orcam flat available cam available 44 44 Hex cam or flat cam available 7.9 (.31) 44.5 (1.75 Low Profile Flat Cam 44.5 43 (1.68) Hex 40 (1.59) Flat 0 (.77) Flat 0 (.77) Flat 4 (.95) Hex 4 (.95) Hex 45 (1.78) Hex 45 (1.78) 44 (1.7) HexFlat 44 (1.7) Flat Hex Cam 1.7 1.7 6 (.4) CTUL (see note) SIZE 5.4±0.1 (.05 ±.004) Flat Cam 37.5 (1.48) Steel K5-81-07 K5-857-07 K5-814-07 K5-858-07 K5-856-07 K5-811-07 Stainless Steel ~ K5-857-5 ~ ~ K5-856-5 K5-811-5 9 (.35) 1 (.688) 8.5 (1.) 51 (.00) 35 (1.375) 9.5±0.1 (.375) 19±0.1 (.750) www.southco.com/k5
K5 Draw Latch Rotary Large 7 Padlockable (riveted hex cam shown) 51 (.00) (.88) 106 (4.19) Key Lockable 41.5 (1.63) 70 (.75) (.88) R 5.6 (.) Ø 4.9 (.194 ) 1 (.83) 43 (1.68) 16.5 (.65) 1.5 (.844) (1.500) 9 (.35) 49 (1.9) 44.5 8.5 (1.) Ø 5.0 (.194) (8 Places) 1 1.7 19±0.1 (.750) 51 (.00) 9.5±0.1 (.375) 37.5 (1.48) Steel, zinc d Installation Install assembly with Ø 5 (3/16) rivets or M5 (No. 10) flat head screws (not Spring loaded: up to 4 (.16) for mounting hole gasket set. (3.79±0.6) (3.43±0.6) 3.3 (.13) 41.5 (1.63) 70 (.75) 83 (3.5) Tool Operated (spring loaded shown) (3.79±.06) (3.43±.06) 41.5 (1.63) 83 (3.5) (.88) (engaged) (.88) Hex Spring-loaded version shown 4 (.95±.03) 4 (.95) 44.5 9 (.35) 9 (.35) 44.5 35 (1.375) (.688) 6 (.44) (3.43±.06) (3.79±.06) 8.5 (1.) 19±0.1 (.750) Edges Padlockable Riveted Flat Cam Padlockable Flat Cam, Key Lockable Tool Operated, 1.7 (.88) 5.4±0.1 (.05±.004) 9.5±0.1 (.375) 41 (1.6) Latch Part 70 (.75) Number 83 (3.5) Padlockable Riveted Hex Cam K5-754-07 K5-1993-07 K5-1994-07 K5-813-07 K5-819-07 Tool Operated, Riveted K5-818-07, Padlockable 44 K5-811-07 K5-1736-07 Hex cam or flat cam available 10.5 (.41) 0 (.77) Flat 4 (.95) Hex 45 (1.78) Hex 44 (1.7) Flat (.688) 6 (.4) (see note) 8.5 (1.) www.southco.com/k5
Southco Draw Latches Link Lock Rotary ction Draw Latch, Medium Flat Cam Style Key-lockable, Small Wing or Large Wing vailable Blade swings open when unlatched ccommodates off-plane latching Small Wing BLDE EXTENSION 4 (.14) B 4.5 0.1 Ø.177.004 SPRING RIVET CP SLIDE HOUSING NOTE: SPRING LODED BLDE FOLDS BCK UTOMTICLLY WHEN UNLTCHED DIMENSIONS B C 49.7 (1.96) 69.6 (.74) 5.6 (1.01) K4-4004-07-1 PRT NUMBERS Draw Latches Steel/Stainless Steel 37 (1.47) WING 41 0.1 (1.6.004) 5.4 (.06) 55.5 (.19) 57 (.4) 31 0.1 (1..004) CM RIVET 0 (.80) 44 (1.7) 6 (.5) C HOUSING, SLIDE and BLDE EXTENSION: 4130 Hardened steel, zinc d plus bright chromate dip. RIVET: 1006 Steel, zinc d plus bright chromate dip. SPRING and CP: 30 Series stainless steel, natural. WING and LOWER CM: 100 Steel, zinc d bright chromate dip. UPPER CM: 304 Series stainless steel, natural. CM RIVET: 300 Series stainless steel, natural. Large Wing BLDE EXTENSION B 4 (.14) 66.3 (.61) 69.3 (.73) 7.6 (.86) DIMENSIONS B 85.3 (3.36) 89.1 (3.51) 9. (3.63) C 30. (1.19) 30.7 (1.1) 31.5 (1.4) PRT NUMBERS KEY LOCK VERSION K4-404-07-3 K4-404-07-4 K4-404-07-5 57 (1.47) 4.5 0.1 Ø.177.004 76 (3.00) SPRING RIVET 31 0.1 (1..004) WING CP CM RIVET SLIDE HOUSING 6 (1.04) 64 (.50) NOTE: SPRING LODED BLDE FOLDS BCK UTOMTICLLY WHEN UNLTCHED HOUSING, SLIDE and BLDE EXTENSION: 4130 Hardened steel, zinc d plus bright chromate dip. RIVET: 1006 Steel, zinc d plus bright chromate dip. SPRING and CP: 30 Series stainless steel, natural. WING and LOWER CM: 100 Steel, zinc d bright chromate dip. UPPER CM: 304 Series stainless steel, natural. CM RIVET: 300 Series stainless steel, natural. LOCK PLUG: Die cast zinc, bright chrome d. PWL: Low carbon steel, zinc d plus chromate dip. MOUNTING NUT: Brass, natural. KEYS: Low carbon steel, chrome d. 41 0.1 (1.6.004)) 5.4 (.06) 55.6 (.19) LOCK SSEMBLY (Keylock Version) (.85) * S-500 latches can be used with No. K3, No. K4 or No. K5 s. C millimeter (inch) millimeter (inch) Dimensions without tolerances are for reference only. 190 Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.
Southco Draw Latches Link Lock Rotary ction Draw Latch, Folding Blade Extensions Blade swings open when unlatched Latch can be recessed into a panel ccommodates off-plane latching Series S-000 3.5 (.14) L 73 (.86) 6 (.5) 5.5 (.) 51 (.00) 5 (.199) 0 (.79) 0 (.79) DIMENSIONS L 51 (.00) 63 67(.63) 70 (.75) 76 (3.00) 79 (3.11) 91 (3.58) 95 (3.74) 98 (3.86) 104 (4.11) PRT NUMBERS K5-1974-07 K5-00-07 K5-07-07 K5-4-07 K5-16-07 Draw Latches Steel/Stainless Steel Series S-3000 (.07) DIMENSIONS L 54 (.13) 67 (.63) 69 (.70) 81 (3.0) PRT NUMBERS K3-436-07 K3-468-07 L 0 (1.54) HOUSING, SLIDE and BLDE EXTENSION: Hardened alloy steel, zinc d plus bright chromate dip. CP, CM RIVET and SPRINGS: 300 Series stainless steel. UPPER CM (S-000): 300 Series stainless steel. UPPER CM: (S-3000): Carbon steel; zinc d plus bright chromate dip. 4 (.16) 3 (.13) 31 (1.) 3.3 (.130) (.60) * S-000 and S-3000 latches can be used with Large, Medium or Miniature s. millimeter (inch) millimeter (inch) Dimensions without tolerances are for reference only. Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility. 18 (.69) 191