1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron. The different configurations of the butterfly materials and of the liner make it suitable for many applications. Wafer mounting with centring ears between PN10/16 and ANSI 150 flanges. The ISO 5211 mounting pad enables the UM actuator to be directly assembled. The latter is suitable for S4-type service factor, installed indoors or outdoors under shelter. ISO 9001 3.1 Cert. 0409 IP 65 LIMITS OF USE Fluid pressure: WP Fluid temperature: WT Ambient temperature Service factor 16 bar up to DN 300 10 bar up to DN 400 According to the table below -15 C / +50 C S4 30% - 10 starts/h AVAILABLE MODELS DN 32-40 to DN 150 Connection between flanges PN10/16 and ANSI 150 RF Supply voltages: 24V CC, 24 V CA and 230 V CA Ref. Butterfly Liner Example of applications WT min 1141 GS cast iron NBR Natural gas NF-ROB GAZ authorisation 5 bar -10 C +60 C 1147 316 SS NBR carboxyle Powdery - abrasive -10 C +90 C 1149 316 SS EPDM CH. Hot water -10 C +130 C 1150 GS cast iron EPDM Cold water warm water (110 C at peak) - ACS -10 C +90 C 1151 316 SS NBR Hydrocarbon, natural gas, compressed air -10 C +90 C 1152 GS cast iron NBR Hydrocarbon, natural gas, compressed air -10 C +90 C 1153 316 SS EPDM Demineralised water alkalis (110 C at peak) - ACS -10 C +90 C 1154 316 SS FPM Compatible aggressive fluids, petrol -5 C +150 C 1156 316 SS White NBR Compatible food fluids -10 C +80 C 1157 316 SS SILICONE Oils and fat -15 C +150 C 1158 Copper-alu NBR Seawater -10 C +80 C 1183 Polished SS Food SILICONE Food fluids (FDA authorisation) -15 C +150 C WT max Telephone: +33 4 74 94 90 70 Fax: +33 4 74 94 13 95 Pages 1/4 Ref. FT1150+UM ENG Rev. 06 Date 04/2016
1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR DIRECTIVES AND MANUFACTURING STANDARDS Item Standard ON Item Standard Pressure Equipment Directive 97/23/EC Cat. III modules B+C1 0409 Final test ISO 5208 ATEX Directive II 2G/D Tx zones 1,2,21 and 22 0038 Face-to-face dimension ISO 5752 series 20 Flange dimension EN 1092-1 Connection Motorisation ISO 5211 Sanitary conformity ACS No. 07 ACC LY 504 MANUFACTURING Item Name 1147 1149 1141 1150 1152 1151 1153 1154 1156 1157 1183 1158 1 Body GS EN GJS-500-7 cast iron 2 Butterfly DN32-100 1.4408 SS 3 Butterfly DN125-400 3 Liner GS Cast iron NBR carboxyle Stainless steel GS EN GJS-500-7 cast iron 1.4408 SS Polished SS EPDM CH NBR Gaz EPDM NBR NBR EPDM FPM White NBR Silicone Food silicone NBR 4 Stem 304 SS 304 SS 304 SS 420 SS 420 SS 304 SS 304 SS 304 SS 304 SS 304 SS 304 SS 304 SS 5 O-ring NBR NBR NBR EPDM NBR NBR EPDM FPM NBR EPDM EPDM NBR 6 Ring Steel 7 Circlips Steel 8 ISO mounting pad aluminium 9 Screw 5.6 steel 10 Washer steel Copperalu Telephone: +33 4 74 94 90 70 Fax: +33 4 74 94 13 95 Pages 2/4 Ref. FT1150+UM ENG Rev. 06 Date 04/2016
1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR DIMENSIONS (mm) DN 32-40 50 65 80 100 125 150 200 250 300 350 400 A 206 228 243 266 294 324 349 438 461 523 582 645 B 140 156 162 170 185 207 216 256 248 280 300 340 Ø De 82 102 119 135 155 185 208 270 328 381 437 486 E 33 43 46 46 52 56 56 60 68 78 78 102 Ø F 10.5 10.5 14.5 16.5 16.5 18.5 18.5 22.5 25.5 30.5 30.5 35.5 Ø G 110 125 145 160 180 210 240 295 350 400 460 515 Ø P 88 88 88 88 88 105 105 105 150 150 170 170 Ø T 18 18 18 18 18 18 23 23 23 23 23 17 Weight (kg) 2.46 3.66 4.40 4.60 6 7.60 9.20 14.7 24.7 33 39 52 FLOW-RATE COEFFICIENT Kv (m 3 /h) DN 32-40 50 65 80 100 125 150 200 250 300 350 400 Kv 70 109 200 334 551 901 1427 2383 3825 5659 8177 10659 Telephone: +33 4 74 94 90 70 Fax: +33 4 74 94 13 95 Pages 3/4 Ref. FT1150+UM ENG Rev. 06 Date 04/2016
1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR UM ELECTRICAL MOTORISATION The UM motorisation proposed as a standard extends to: - IP65 plastic housing for actuator and steel gear box, - safety coefficient of 1.3 minimum compared to the nominal torque of the valve, - upstream / downstream pressure difference ΔP=10 bar max. The actuator assembly is of the direct type, with aluminium motorisation mounting pad. DN Actuator Power Time 230V AC Time 24V AC/DC 32-40 UMA 3,5 10 W 10 s 15 s 40 UMA 3,5 10 W 10 s 15 s 50 UMA 3,5 10 W 10 s 15 s 65 UMA 3,5 10 W 10 s 15 s 80 UMA 3,5 10 W 10 s 15 s 100 UMC 10 25 W 8 s na 125 UMC 10 25 W 8 s na 150 UMC 15 25 W 8 s 8 s Standard equipment of the actuator 2 adjustable limit switches 2 dry auxiliary contacts Thermal protection of the motor Stand-by manual control with key Position visual indicator Electrical connection: UMA 3.5: 1 P.E. ½ PF UMC 10: 2 P.E. ½ PF Equipment items as options Anti-condensation heater For any other operating conditions, please contact us. * indicative time for actuator running empty MOTORISATION OPTIONS There are several options for which you are invited to contact our sales service: 1 actuator dimensioned for an upstream / downstream pressure difference ΔP greater than 10 bar 2 UV actuator with override by handwheel 3 anti-condensation heater OPTIONS ON THE VALVE 1 Carbon steel body, 304 and 316 SS, bronze and aluminium 2 Carbon steel butterfly, 304 and 316 SS, copper-alu, Uranus, Hastelloy 3 Hypalon liner, silicone steam, white EPDM, natural rubber, neoprene, vulcanised 4 Stems of 420, 304, 316 SS, Hastelloy Telephone: +33 4 74 94 90 70 Fax: +33 4 74 94 13 95 Pages 4/4 Ref. FT1150+UM ENG Rev. 06 Date 04/2016
UM 3.5 ELECTRIC ACTUATOR FEATURES The UMA 3.5 electric actuator is intended for motorising, ¼ turn valves with a torque of 35Nm. With a compact construction and plastic housing, it is especially well suited for motorising small-size ball valves and butterfly valves. IP65 leak-tightness: it can be used indoors and outdoors under a shelter. AVAILABLE MODELS Supply voltages: 230V AC and 24V AC/DC LIMITS OF USE IP 65 IP Code IP 65 Ambient temperature Service factor - 10 C / +55 C S4-30% MECHANICAL FEATURES Gear box treated steel pinions Torque 35 Nm Angle of rotation 90 +/- 5 Declutching Button Override control by key Actuator UMA 3,5 UMA 3,5 Voltage 230V AC 24V AC / DC 230V AC Manoeuvring time (s) 12 15s (AC) 16s (DC) ISO 5211 F03 / F05 star 14 40 ELECTRICAL FEATURES Motor protection Limit switches Auxiliary switches Anti-condensation UM 3.5 electrical connection Thermal switch 2 adjustable switches 2 adjustable dry switches as an option 2 C.G. ½ PF Actuator UMA 3,5 UMA 3,5 Voltage 230V AC 24V AC/DC 230V AC Power (W) 10 3 10 Current (A) 0.25 0.15 0.25 Telephone: +33 4 74 94 90 Fax : +33 4 74 94 13 95 Pages 1/2 Ref. FT2206 ENG Rev. 11 Date 03/2016
UM 3.5 ELECTRIC ACTUATOR CONSTRUCTION Housing Cover Gear boxes Stem end Adjustable cams Position indicator PA 66 plastic PA 66 plastic Treated steel Star Steel Plexiglas WIRING DIAGRAM 230V AC DIMENSIONS (mm) WIRING DIAGRAM 24V AC/DC Telephone: +33 4 74 94 90 Fax : +33 4 74 94 13 95 Pages 2/2 Ref. FT2206 ENG Rev. 11 Date 03/2016
UMC ELECTRIC ACTUATOR FEATURES UMC and UMCL electric actuators are intended for motorising ¼ turn valves with a torque of 100 to 150Nm. With a compact construction and plastic housing, they especially well suited for motorising small-size ball valves and butterfly valves. IP65 leak-tightness: it can be used indoors and outdoors under a shelter. AVAILABLE MODELS 100Nm and 150Nm torques Supply voltages: 230V AC, 24V AC and 24V DC IP 65 LIMITS OF USE IP Code IP 65 Ambient temperature Service factor - 10 C / +60 C S4-30% MECHANICAL FEATURES Gear box treated steel pinions Angle of rotation 90 +/- 5 Declutching Without Override control By key (except UML) Actuator UMC10 UMC15 UMC 15L Voltage 230V AC 230V AC 24V AC 24V DC 230V AC Torque (Nm) 100 150 Manoeuvring time (s) 8 8 8 8 45 ISO 5211 F03 / F07 star 17 ELECTRICAL FEATURES Motor protection Limit switches Auxiliary switches Anti-condensation Electrical connection Thermal switch 2 adjustable switches 2 adjustable dry switches as an option 2 C.G. ½ PF Actuator UMC10 UMC15 UMC 15L Voltage 230V AC 230V AC 24V AC 24V DC 230V AC Power (W) 25 25 25 25 25 Current (A) 0.42 0.42 0.5 0.5 0.42 Telephone: +33 4 74 94 90 Fax: +33 4 74 94 13 95 Pages 1/3 Ref. FT2224 ENG Rev. 10 Date 03/2016
UMC ELECTRIC ACTUATOR CONSTRUCTION Housing Cover Gear boxes Stem end Adjustable cams Position indicator PA 66 plastic PA 66 plastic Treated steel Star Steel Plexiglas DIMENSIONS (mm) A 165 B 165 C 8 D 200 Telephone: +33 4 74 94 90 Fax: +33 4 74 94 13 95 Pages 2/3 Ref. FT2224 ENG Rev. 10 Date 03/2016
UMC ELECTRIC ACTUATOR WIRING DIAGRAM 230V AND 24 V AC 1 Common 3 Opening phase 4 Closing phase 5 Switch powered open 6 Switch powered closed 7 Heater 8 Heater C LS3 auxiliary common Opening NO NO switch Aux. Opening LS3 NC NC switch Aux. Opening LS3 C LS4 auxiliary common Closing NO NO switch Aux. LS4 Closing NC NC switch Aux. LS4 Closing 230 V AC 24 V AC WIRING DIAGRAM 24V DC 1 wiring with + 3 wiring with - Bridge between 3 and 4 opening 4 disconnected closing 5 Switch powered open 6 Switch powered closed 7 Heater 8 Heater D1 Common auxiliary No. 1 D2 NO switch Aux. No. 1 D3 NC switch Aux. No. 1 C1 Common auxiliary No. 2 C2 NO switch Aux. No. 2 C3 NC switch Aux. No. 2 Telephone: +33 4 74 94 90 Fax: +33 4 74 94 13 95 Pages 3/3 Ref. FT2224 ENG Rev. 10 Date 03/2016