PL1 VALVE WITH UM ELECTRIC ACTUATOR
|
|
- Pearl Tyler
- 5 years ago
- Views:
Transcription
1 PL1 VALVE WITH UM ELECTRIC ACTUATOR FEATURES The PL1 butterfly-valves are wafer-style valves intended for current valve applications. This PN10 butterfly-valve of reinforced polypropylene is used to isolate low-pressure water, acid or alkaline* fluid networks. The materials used are anti-uv coated. The valve has an ISO 5211 mounting pad for the direct mounting of the UM actuator. The latter is suitable for S4-type service factor, installed indoors or outdoors under shelter. (*Cf. Sectoriel's table of resistance of materials) IP 65 AVAILABLE VERSIONS PVC-U or PP body, PP-GF butterfly, EPDM or FPM sleeve. DN40 to DN350 diameters. Connection between EN PN10 flanges. 24V AC, 24V DC and 230V AC supply voltages. LIMITS OF USE Fluid pressure: WP Fluid temperature: WT Ambient temperature Service factor 10 bar See curves 0 C to +60 C S4 30% - 10 starts/h DIRECTIVES AND MANUFACTURING STANDARDS Standard Standard Pressure Equipment Directive 97/23/EC DN40 to 350 Category I Connection Motorisation ISO 5211: Connection between flanges EN Final test EN Telephone: Fax: Pages 1/3 FT53SUM-PL1 ENG Rev. 03 Date 11/2016
2 PL1 VALVE WITH UM ELECTRIC ACTUATOR DIMENSIONS (mm) DN d C1 C2 H1 H2 H3 D W e CONSTRUCTION N Item PL1 PVC-U PL1 PP 01 Body PVC-u PP 03 Butterfly PP-GF PP-GF 05 Stem SS SS 11 Stem ring PVC-u PP 19 Plug PP PP 41 O-ring EPDM / FPM EPDM / FPM 47 Liner EPDM / FPM EPDM / FPM FLOW-RATE COEFFICIENT Kv (m 3 /h) DN Kv Telephone: Fax: Pages 2/3 FT53SUM-PL1 ENG Rev. 03 Date 11/2016
3 PL1 VALVE WITH UM ELECTRIC ACTUATOR UM ELECTRICAL MOTORISATION The UM motorisation proposed as standard is meant for: - IP65 plastic housing for actuator and steel gear box, - safety coefficient of 1.3 minimum compared to the nominal torque of the valve, - upstream / downstream pressure difference ΔP=10 bar max. The actuator's assembly is direct. DN Actuator Power 230V AC / 24V AC/DC Current 230V AC / 24V AC/DC Time 230V AC / 24V AC/DC 40 UMA W / 3W 0.25 A / 0.15 A 12 s / 15/16 s 50 UMA 3,5 10 W / 3W 0.25 A / 0.15 A 12 s / 15/16 s 65 UMA W / 3W 0.25 A / 0.15 A 12 s / 15/16 s 80 UMB 7 18 W / 3W 1 A / 0.15 A 13 s / 16/19 s 100 UMC W (230V AC) 0.42 A (230V AC) 8 s (230V AC) 125 UMC W (230V AC) 0.42 A (230V AC) 8 s (230V AC) 150 UMC W (230V AC) 0.42 A (230V AC) 8 s (230V AC) Standard equipment of the actuator 2 adjustable limit switches 2 dry auxiliary contacts Thermal protection of the motor Stand-by manual control with key Disengaging button Position visual indicator Electrical connection: 2 C.G. PF 1/2 200 UMC W 0.42 A / 0.5 A 8 For any other operating conditions, please contact us. * indicative time for actuator running empty MOTORISATION OPTIONS There are many options for which you are invited to contact our sales service: 4 UV actuator with override by handwheel 5 anti-condensation heater Telephone: Fax: Pages 3/3 FT53SUM-PL1 ENG Rev. 03 Date 11/2016
4
5 UM 3.5 ELECTRIC ACTUATOR FEATURES The UMA 3.5 electric actuator is intended for motorising, ¼ turn valves with a torque of 35Nm. With a compact construction and plastic housing, it is especially well suited for motorising small-size ball valves and butterfly valves. IP65 leak-tightness: it can be used indoors and outdoors under a shelter. AVAILABLE MODELS Supply voltages: 230V AC and 24V AC/DC LIMITS OF USE IP 65 IP Code IP 65 Ambient temperature Service factor - 10 C / +55 C S4-30% MECHANICAL FEATURES Gear box treated steel pinions Torque 35 Nm Angle of rotation 90 +/- 5 Declutching Button Override control by key Actuator UMA 3,5 UMA 3,5 Voltage 230V AC 24V AC / DC 230V AC Manoeuvring time (s) 12 15s (AC) 16s (DC) ISO 5211 F03 / F05 star ELECTRICAL FEATURES Motor protection Limit switches Auxiliary switches Anti-condensation UM 3.5 electrical connection Thermal switch 2 adjustable switches 2 adjustable dry switches as an option 2 C.G. ½ PF Actuator UMA 3,5 UMA 3,5 Voltage 230V AC 24V AC/DC 230V AC Power (W) Current (A) Telephone: Fax : Pages 1/2 FT2206 ENG Rev. 11
6 UM 3.5 ELECTRIC ACTUATOR CONSTRUCTION Housing Cover Gear boxes Stem end Adjustable cams Position indicator Treated steel Star Steel Plexiglas WIRING DIAGRAM 230V AC DIMENSIONS (mm) WIRING DIAGRAM 24V AC/DC Telephone: Fax : Pages 2/2 FT2206 ENG Rev. 11
7 UMB 7 ELECTRIC ACTUATOR FEATURES The UMB 7 electric actuator is intended for motorising ¼ turn valves with a torque of 70Nm., With a compact construction and plastic housing, it is especially well suited for motorising small-size ball valves and butterfly valves. IP65 leak-tightness: it can be used indoors and outdoors under a shelter. AVAILABLE MODELS Supply voltages: 230V AC, 24V AC/DC. LIMITS OF USE IP Code IP 65 Ambient temperature Service factor - 10 C / +55 C S4-30% MECHANICAL FEATURES Gear box treated steel pinions Angle of rotation 90 +/- 5 Torque 70 Nm Declutching Button Override control by key Actuator UMB 7 Voltage 230V AC 24V AC / DC Manoeuvring time (s) 13 (50 Hz) 11 (60 Hz) 16 (AC) 19 (DC) ISO 5211 F05 / F07 star 14 IP 65 ELECTRICAL FEATURES Motor protection Limit switches Auxiliary switches Anti-condensation UMB 7 electrical connection Thermal switch 2 adjustable switches 2 adjustable dry switches as an option 2 C.G. 1/2 PF Actuator UMB 7 Voltage 230V AC 24V AC/DC Power (W) 18 3 Current (A) Telephone: Fax: Pages 1/2 FT2217 ENG Rev. 01
8 UMB 7 ELECTRIC ACTUATOR CONSTRUCTION Housing Cover Gear boxes Stem end Adjustable cams Position indicator Treated steel Star Steel Plexiglas WIRING DIAGRAM 230V AC DIMENSIONS (mm) WIRING DIAGRAM 24V AC/DC Telephone: Fax: Pages 2/2 FT2217 ENG Rev. 01
9 UMC ELECTRIC ACTUATOR FEATURES UMC and UMCL electric actuators are intended for motorising ¼ turn valves with a torque of 100 to 150Nm. With a compact construction and plastic housing, they especially well suited for motorising small-size ball valves and butterfly valves. IP65 leak-tightness: it can be used indoors and outdoors under a shelter. AVAILABLE MODELS 100Nm and 150Nm torques Supply voltages: 230V AC, 24V AC and 24V DC IP 65 LIMITS OF USE IP Code IP 65 Ambient temperature Service factor - 10 C / +60 C S4-30% MECHANICAL FEATURES Gear box treated steel pinions Angle of rotation 90 +/- 5 Declutching Without Override control By key (except UML) Actuator UMC10 UMC15 UMC 15L Voltage 230V AC 230V AC 24V AC 24V DC 230V AC Torque (Nm) Manoeuvring time (s) ISO 5211 F03 / F07 star 17 ELECTRICAL FEATURES Motor protection Limit switches Auxiliary switches Anti-condensation Electrical connection Thermal switch 2 adjustable switches 2 adjustable dry switches as an option 2 C.G. ½ PF Actuator UMC10 UMC15 UMC 15L Voltage 230V AC 230V AC 24V AC 24V DC 230V AC Power (W) Current (A) Telephone: Fax: Pages 1/3 FT2224 ENG Rev. 10
10 UMC ELECTRIC ACTUATOR CONSTRUCTION Housing Cover Gear boxes Stem end Adjustable cams Position indicator Treated steel Star Steel Plexiglas DIMENSIONS (mm) A 165 B 165 C 8 D 200 Telephone: Fax: Pages 2/3 FT2224 ENG Rev. 10
11 UMC ELECTRIC ACTUATOR WIRING DIAGRAM 230V AND 24 V AC 1 Common 3 Opening phase 4 Closing phase 5 Switch powered open 6 Switch powered closed 7 Heater 8 Heater C LS3 auxiliary common Opening NO NO switch Aux. Opening LS3 NC NC switch Aux. Opening LS3 C LS4 auxiliary common Closing NO NO switch Aux. LS4 Closing NC NC switch Aux. LS4 Closing 230 V AC 24 V AC WIRING DIAGRAM 24V DC 1 wiring with + 3 wiring with - Bridge between 3 and 4 opening 4 disconnected closing 5 Switch powered open 6 Switch powered closed 7 Heater 8 Heater D1 Common auxiliary No. 1 D2 NO switch Aux. No. 1 D3 NC switch Aux. No. 1 C1 Common auxiliary No. 2 C2 NO switch Aux. No. 2 C3 NC switch Aux. No. 2 Telephone: Fax: Pages 3/3 FT2224 ENG Rev. 10
BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron.
More informationVALVES WITH UM ELECTRIC ACTUATOR
505-507 VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 505+UM and 507+UM cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More information502 VALVE WITH UM ELECTRIC ACTUATOR
502 VALVE WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 502+UM is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons, etc. It is a full
More informationXS VALVES WITH UM ELECTRIC ACTUATOR
780-781XS VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 780XS+UM L-port and 781 XS+UM T-port stainless steel 3-way ball valves are dedicated to the mixing, diverting or automatic discharging of
More informationVALVE WITH UV ELECTRIC ACTUATOR
762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full
More informationVALVES WITH UV ELECTRIC ACTUATOR
505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More information502 VALVE WITH UM ELECTRIC ACTUATOR
502 VALVE WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 502+UM is a 2 way brass ball valve dedicated to the automatic shut off of non corrosive common fluids: water, air, hydrocarbons, etc. It is a full
More informationBUTTERFLY VALVES + SA ACTUATOR
1150-1183 BUTTERFLY VALVES + SA ACTUATOR FEATURES 1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve body is made of GS cast iron. The different
More informationVALVE WITH UV ACTUATOR
CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves
More informationX=ATEX BUTTERFLY VALVES + SA & NA ACTUATOR
B. V. E page 9 0409 AD E page 13 Ambient temperature -15 C / +70 C NBR 1147 316 SS NBR carboxyle 1149 1150 1151 316 SS GS cast iron 316 SS EPDM CH. EPDM NBR 1152 1153 GS cast iron 316 SS NBR EPDM 1154
More information502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:
Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,
More informationVALVES WITH SA ELECTRIC ACTUATOR
505-507 VALVES WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 505+SA and 507+SA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationVALVES WITH NA ELECTRIC ACTUATOR
505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.
More informationVALVES WITH SA03 ELECTRIC ACTUATOR
513-514 VALVES WITH SA03 ELECTRIC ACTUATOR CHARACTERISTICS The 513+SA03 L-port and 514+SA03 T-port stainless steel 3-way ball valves are dedicated to the mixing, diverting or automatic discharging of industrial
More informationBUTTERFLY VALVES + NA ELECTRIC ACTUATOR
1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks
More informationVALVE WITH SA ELECTRIC ACTUATOR
752-753 VALVE WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 752-753+SA ball valve is dedicated to the automatic opening/shut-off of pipes carrying unloaded industrial fluids with a 16 bar maximum pressure.
More informationXS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR. Model/Ref:
736-746XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR Model/Ref: 272500023000 www.lauridsenindustri.com CHARACTERISTICS The 736XS (steel) and 746XS (stainless steel) + SA05 2-way ball valves are dedicated
More informationXS-F VALVE WITH SA ELECTRIC ACTUATOR
702-703XS-F VALVE WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 702-703 XS-F + SA valve is a ball valve dedicated to the automatic opening/shut off of industrial uncharged fluids below 137 bar and 220
More informationXS VALVES WITH SA ELECTRIC ACTUATOR. Model/Ref:
780-781XS VALVES WITH SA ELECTRIC ACTUATOR Model/Ref: 275400023010 www.lauridsenindustri.com CHARACTERISTICS The 780XS+SA L-port and 781 XS+SA T-port stainless steel 3-way ball valves are dedicated to
More informationMotorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated
More informationMotorized Butterfly Valve Actuated Wafer type butterfly valves
Motorized Butterfly Valve Actuated Wafer type butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600) For On-Off or Modulating Control Manual override non-clutch design. Manual operation can
More informationMotorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN600 for PN16 type, DN50 DN350 for PN25 type) For On-Off or Modulating Control Manual override non-clutch
More informationVALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
More informationBRONZE ZEUS PNEUMATIC ANGLE-SEAT VALVE
FEATURES The bronze ZEUS valve is intended for the automatic shutoff of networks of fluids. The full-bore inclined-seat body and the excellent flow-rate coefficients allow for very low pressure drops.
More informationMotorized Butterfly Valve
Motorized Butterfly Valve Actuated butterfly valves PRODUCT DATA FEATURES Wide size range (DN 50 500) For On-Off Control with feedback signal Manual override Hand-Wheel design. Manual operation can be
More informationSTAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
More informationValves for general purpose & industry
Valves for general purpose & industry Carbon steel & stainless steel ball valves 1 piece body... page 14 2 piece body... page 14 2 piece body - High temperature... page 14 2 piece construction - 3 way...
More informationCurrent consumption Auxiliary switch. Angle of rotation 90 (internal electrical stops) Running time
Technical data sheet Rotary actuator SY-4--T Rotary actuators for butterfly valves Torque 50 Nm Nominal voltage AC 4 V Control: Open-close or -point Auxiliary switch Technical data Electrical data Nominal
More informationElectric Actuated Butterfly Valves Ductile Iron Wafer Body ASME 150# 2 to 6 Pipe
2 to 6 Pipe Features Direct mount wafer butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve
More informationR o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
More informationV4(V7)-ABFW-EPN16 Actuated Wafer type butterfly valves
V4(V7)-ABFW-EPN16 Actuated Wafer type butterfly valves FEATURES PRODUCT DATA Cast Iron (V4) or SUS304 (V7) Wafer Body Centric butterfly valve with elastomer liner Wide DN-range (DN 50 DN600) For On/Off
More informationElectrical data Nominal voltage AC 24 V, 50/60 Hz DC 24 V. Power consumption In operation At rest For wire sizing. Non-operating temperature
echnical data sheet SR24P-R Robustline rotary actuator for butterfly valves and rotary valves in Retrofit applications orque 18 Nm Nominal voltage AC/DC 24 V Control: Open-close or 3-point Optimum protection
More informationRate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
More informationElectric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe
Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe SERIES Features Wafer butterfly valve with ISO5211 direct mount actuator Unique wave line seat reduces torque
More informationBYV Series Butterfly Valve Product Guide FLOW CONTROL
BYV Series Butterfly Valve Product Guide FLOW CONTROL 17 Q U A L I T Y S E R V I C E I N T E G R I T Y 1 OVERVIEW Engineered Hand Lever Design for Enhanced Strength and UV Performance Ergonomic Grip and
More informationType 147. Electrically Actuated Lug Butterfly Valve
GF Piping Systems Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM
More informationBUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
More informationEL5600 Series Electric Actuators for DN15 to DN100 Valves
Page 1 of 5 TI-P358-07 CH Issue 8 Cert. No. LRQ 0963008 ISO 9001 EL5600 Series Electric s for DN15 to DN100 Valves Description The EL5600 series electric actuators are reversible having linear output.
More informationintroduction FE Series Automated Butterfly Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ANSI B16.5 IPEX FE Series Automated Butterfly Valves incorporate many features of our industrial FK valve, yet the all PVC construction and EPDM
More informationPower consumption In operation At rest For wire sizing. Non-operating temperature
echnical data sheet DRC4G--7 Rotary actuator for butterfly valves for outdoor applications orque 90 Nm (not constant) Nominal voltage AC/DC 4 V Control: Open-close IP66 Optimum protection against moisture
More informationBUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR
1121-1125 BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 1121 to 1125 wafer butterfly valves are dedicated to the automatic shut-off of medium pressure industrial fluids lines up to
More informationKEYSTONE. Hygienic butterfly valves model F250 & F251 Installation & Maintenance Instructions. 1 Contents 1 Contents 1
Installation & Maintenance Instructions KEYSTONE 1 Contents 1 Contents 1 2 Introduction 1 2.1 Valve use 1 2.2. Application area 1 2.3. Incorrect use 1 3. Safety 2 4. Transport and storage 2 5. Installation
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN10/16, ANSI150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
More information+GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE 3-16
+GF+ PNEUMATIC ACTUATED BALL VALVE Type 21/2 2-way True Union Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 21-2 uses
More informationSize : Ends : Min Temperature : Max Temperature : MADE OF STAINLESS... MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationATM SERIES THREE PHASE MULTI - TURN
ATM SERIES THREE PHASE MULTI - TURN Manual Operated Wheel Lifting Lugs for Easy Handling Comfort Size Clutch for Manul Operation High Torque Efficiency reversible motor Product Specification Watertight
More informationBALL VALVE WITH ADA PNEUMATIC ACTUATOR
762-763 BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 762-763 valve is a split body flanged ball valve dedicated to the automatic shut off of lines of standard fluids. With full bore construction,
More informationElectric actuators type EA25-250
Electric actuators type EA25-250 Small & Light Product description The actuators type EA25, EA45, EA120 and EA250 are not only excellently equipped, they also feature very high peak torques ranging from
More informationSize : Ends : Min Temperature : Max Temperature : Materials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More information771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
More information2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
More informationElectrical data Nominal voltage AC/DC 24V Nominal voltage frequency 50/60Hz
GR24A-5 / -7 GR24A-5 Rotary actuator for rotary valves GR24A-7 Rotary actuator for rotary valves Nominal torque 40Nm Nominal voltage AC/DC 24V Control Open-close echnical data Electrical data Nominal voltage
More informationProduct bulletin for: ST2 Ball valves with two-way and three-way BSPP threaded fittings
Product bulletin for: ST2 Ball valves with two-way and three-way BSPP threaded fittings ST2 Ball valves in conjunction with spring return and non-spring return VA-Actuators Developed for HVAC applications
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationZWISCHENFLANSCH ABSPERRKLAPPE AK011
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1200 Between flanges PN10/16, ANSI150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
More informationMotorized CEPEX EXTREME Ball Valve
AVA Electric Actuator Overview The AVA electric actuator range is instantly recognisable with its orange and gray compact housing, and LED screen. This small sized actuator is feature rich and allows users
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationPraher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
More informationElectric Actuated Butterfly Valves Ductile Iron Lug Body ASME 150# 2 to 6 Pipe
2 to 6 Pipe Features Direct mount lug butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve
More informationCurrent consumption Auxiliary switch. Angle of rotation 90 (internal electrical stops) Running time
Technical data sheet Rotary actuator SY-4--T Rotary actuators for butterfly valves Torque 5 Nm Nominal voltage C 4 V Control: Open-close or -point uxiliary switch Technical data Electrical data Nominal
More informationR o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 flanges - 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO 10497
More informationBall Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
More informationFK Series Automated Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D3222 ASTM D4101 IPEX FK Series Automated Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 350 mm Between flanges GN 25-20 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to API 607 Iso
More informationSize : Ends : Min Temperature : Max Temperature : Materials : PVC-U body
Size : Ends : Min Temperature : Max Temperature : DN 65 to 200 mm Between flanges PN10/16 0 C + 40 C Max Pressure : 10 Bars up to DN125 Specifications : 7 positions lever Wafer type ISO 5211 mounting pad
More informationWAFER BUTTERFLY VALVE
WAFER BUTTERFLY VALVE model 1123 Size: DN 32/40 to DN 1200 Ends: Between flanges PN 10/16, Class 150 up to DN 600 Min Temperature: -10 C Max temperature: +110 C (130 C temporarily) Max pressure: 16 Bars
More informationButterfly Valves. Technical Databook. Belimo Asia Pacific
Butterfly Valves Technical Databook Version 6 Belimo Asia Pacific Index BFV and Actuators Product Range Overview and Applications BU6..Series Motorised Butterfly Valves BU6..Series Butterfly Valves General
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationBALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
More informationType 145. Electrically Actuated Wafer Butterfly Valve
Electrically Actuated Wafer Butterfly Valve Type 1 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 316
More information16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
More informationVALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES
VALVE COMPANY WAFER & LUG TYPE BUTTERFLY VALVES GENERAL CHARACTERISTICS: BS EN 593 CONSTRUCTION: Body: ENGJL Cast Iron (GG25) Disc : Stainless Steel Seat : EPDM, NBR, FPM (Viton) Stem : XCr13 (Stainless
More informationMaterials : ASTM A351 CF8M body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationPower consumption In operation At rest For wire sizing. Torque Inhibiting torque. 150 s / C Sound power level Motor
Technical data sheet GK24G- SuperCap rotary actuator with emergency setting function and extended functionalities in the IP66 protective housing for adjusting air dampers in ventilation and air-conditioning
More informationMaterials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN10/16-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation Ductile
More informationSize : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 40 to DN 300 Between ISO PN10/16 flanges -10 C + 110 C ( 130 C temporarily ) 16 Bars Long neck for isolation Cast iron
More informationThe Belimo Butterfly Valves
The Belimo Butterfly Valves Belimo D(U)6..series Butterfly Valves are designed to meet the stringent needs of HVAC applications requiring positive shutoff for liquids. Valve design features 2 1 7 To satisfy
More informationManual & Actuated Valves
GF Piping Systems Manual & Actuated Valves Technical Catalogue Issue 1 General Information The best choice Corrosion and chemical resistant products, systems and complete solutions from GF Piping Systems
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 300 Between flanges PN10/16 and ISO PN20 ANSI150-10 C + 80 C Max Pressure : 16 Bars Specifications : Long neck for isolation Stainless steel
More informationType Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
More informationC 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
More information710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
More informationMaterials : Ductile iron body EN GJS 500-7
Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16 and Class 150 (PN20) - 10 C + 130 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationButterfly Valves. Technical Databook Version 7.2. Belimo Asia Pacific
Butterfly Valves Technical Databook Version 7.2 Belimo Asia Pacific BFV and Actuators Product Range Overview and Applications BU6..Series Motorised Butterfly Valves page 4 BU6..Series Butterfly Valves
More informationMaterials : Ductile iron body EN GJS
Size : Ends : Min Temperature : Max Temperature : DN 40 to 600 mm Between flanges PN16 up to DN300-10 C + 110 C Max Pressure : 16 Bars up to DN300, 10 bars over Specifications : Long neck for isolation
More informationBOAX-B Mat E. Type Series Booklet
Butterfly Valve with Electric Actuator BOAX-B Mat E PS 16 bar: DN 40 to 200 PS 10 bar: DN 250 and 300 Design to EN 593 and ISO 10631 Type Series Booklet Legal information/copyright Type Series Booklet
More informationConcentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
More informationRef PTFE WAFER BUTTERFLY VALVE. Model/Ref:
Model/Ref: 1155 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 32/40 to 300 mm Between flanges PN10/16 and ISO PN20 ANSI150-25 C + 200 C Max Pressure : 16 Bars up to DN150
More informationMaterials : Ductile iron EN GJS body, EPDM seat
Reinforced lug from DN200 to DN1400 : Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-20 C + 110 C Max Pressure : 16 Bars up to DN300 Specifications
More information*the installation defects and wear defects are not covered by the guarantee
Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16 and Class 150 (PN20) - 30 C + 150 C Max Pressure : 16 Bars up to DN300 Specifications : Long neck for isolation
More informationRef Model/Ref: METAL/METAL WAFER BUTTERFLY VALVE ( NO TIGHTNESS )
Model/Ref: 1111-1112 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 40 to 1400 mm Between flanges PN10/16 and ISO PN20 ANSI150-20 C for carbon steel and -30 C for S.S. type
More informationButterfly valves PN6, PN10, PN16
4 131 ACVATIX Butterfly valves PN6, PN10, PN16 VKF41.. Grey cast iron housing EN-GJL-2 DN 40 200 k vs 4000 m 3 /h For fitting between PN 6, PN 10, PN 16 counter-flanges to ISO 7005 Metallic tight-closing
More informationDN25 DN1000 resp. 1" 42"
DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
Technical data sheet DRK24A-5 SuperCap rotary actuator with emergeny control function and extended functionalities for butterfly valves Nominal torque 9 Nominal voltage AC/DC 24 V Control Open-close Design
More informationMaterials : Ductile iron body EN GJS
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 mm Between flanges PN10/16, Class 150 and JIS10K* - 10 C + 110 C Max Pressure : 16 Bars up to DN300 (10 bars over) Specifications
More informationBUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
More informationMaterials : Carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 mm Between PN25 or PN16 flanges 29 C + 210 C Max Pressure : 25 Bars Specifications : Double eccentric Wafer type Fire safe according to ISO
More information