1 NUKON AUTOMATION SHEET STORAGE SYSTEMS
NUKON AUTOMATION SHEET STORAGE SYSTEMS 2 AUTOMATION LASERS WHICH INCREASE YOUR PRODUCTION EFFICIENCY Nukon automation systems increase your machines productivity and present high quality productıon opportunities in low time. It provides excellent solution wıth semi-automatic and fully automatic options. LOADING SYSTEM Lıft - tech N - lıft LOADING-UNLOADING SYSTEM Expert Lıft Compact LOADING-UNLOADING WITH TOWER SYSTEM Expert Lıft Tower
LIFT - TECH 3 LIFT TECH has been designed for loading sheets to machines automatically. Machine operates at high efficiency and increases capacity of production with LIFT TECH. LIFT TECH create lower costs by increasing productivity with a connected system from stock to machine. The LIFT - TECH loading ECO-S LINE 1530, NF PRO 315.
LIFT - TECH 4 30% energy savings with couter balance system We use special designed reducer and motor to increase the quality of machine usage. Schmalz Vacuum System THK Linear Guide Positioning is provided by servomotors. We use high quality pads Germany Schmalz brand which has double suction for vacuuming. Dry-type vacuum pump is used with 25 m3 / h capacity
LIFT - TECH 5 You can supply two machines at the same time with Lift-Tech that is increased your capacity utilization.
LIFT - TECH 6 Production efficiency is increased by taking metal sheet from three different place with LIFT-TECH
LIFT - TECH 7 TECHNICAL SPECIFICATIONS For NUKON machines ECO 1530 - NF PRO 315 Max lifting capacity Max lifting height Max sheet size Min sheet thickness Carrying surface of load Loads moving Quantity of vacuum Max lifting speed 900 kg 1200 mm 1500x3000 mm 0.5 mm Plain, soft burr Horizontal ø 210 / 8 pieces 20 m/min Max angle of rotation 180 Total machine power Approximately weight 4.25 kw 3000 kg Subject to change. Only specifications in our order confirmation are binding.
N - LIFT 8 N-LIFT has been designed for loading sheets to machines automatically. Machine operates at high efficiency and increases capacity of production with LIFT TECH. N-LIFT minimizes space requirements with compact design. N-LIFT, thanks to the automation system can be programmed structure.
N - LIFT 9 47 seconds cycle time We use high quality pads Germany Schmalz brand which has double suction for vacuuming. Schmalz Vacuum Systems Dry-type vacuum pump is used with 25 m3 / h capacity Safety system sensors are available in the workplace. Hidraulic Power Unit It has flexible structure with 76 angle which can load to machine.
N - LIFT 10 TECHNICAL SPECIFICATIONS For NUKON machines REX, VENTO, NF PRO 315 Max lifting capacity Max lifting height Max sheet size Min sheet thickness Carrying surface of load Carrying of load Quantity of vacuum Cycle time Max lifting speed 750 Kg 600 mm 1500x3000 mm 0.5 mm Plain, Soft burr Horizontal ø210 / 8 pieces 45 sec 20 m/min Max angle of rotation 76 Total machine power Approximately weight 5.5 kw 2500 kg Subject to change. Only specifications in our order confirmation are binding.
EXPERT LIFT COMPACT 11 Loading and unloading is done automatically on your machine with Expert Lift Compact. It has 57 seconds cycle time which is designed to improve productivity. Sheets which are separated by vacuum suction cups is transferred to the pallet exchange table It allows to produce without requiring operator intervention Vibrating system is used to separate the sheet which are stuck together.
EXPERT LIFT COMPACT 12 It increases the capacity utilization working together loading-unloading system and machine. It minimizes space requirements with compact design. Expert Lift Compact can be installed both side of Nukon lasers according to request. It provides the exact solution of single sheet detection with sheeting magnet and double-plate control system. We use high quality pads Germany Schmalz brand which has double suction for vacuuming.
EXPERT LIFT COMPACT 13 TECHNICAL SPECIFICATIONS For NUKON machines 315 420 Available sheet length 3000 mm 4000 mm Available sheet width 1500 mm 2000 mm Min sheet size for loading-unloading 1000 x 2000 mm 1000 x 2000 mm Carrying capacity of loading pallet 3000 kg 3000 kg Min-Max sheet thickness 0,5-25 mm 0,5-25 mm Max sheet weight 900 kg 1600 kg Quantity of vacuum ø 160 / 20 pieces ø 160 / 20 pieces Max horizontal travelling speed 12 m/min 12 m/min Max vertical travelling speed 12 m/min 12 m/min Subject to change. Only specifications in our order confirmation are binding.
EXPERT LIFT TOWER 14 Expert lift Tower provides excellent solution for continuous production by combining automated pallet change with compact storage technique More efficient operation is provided owning to automated operation. Getting high quality owning to transport of sheet without scratching and deforming. Non-stop cutting is continued.
EXPERT LIFT TOWER 15
EXPERT LIFT TOWER 16 Integration of the processing machine %75 saving time of loading-unloading Modular structure that can grow according to the request Fast, safety, easy usage Lower costs due to the compact lay-out Cost of low purchase
EXPERT LIFT TOWER 17 TECHNICAL SPECIFICATIONS For NUKON machines 315 420 Available sheet length 3000 mm 4000 mm Available sheet width 1500 mm 2000 mm Min sheet size for loading-unloading 1000 x 2000 mm 1000 x 2000 mm Carrying capacity of each loading pallet 3000 kg 3000 kg Max pallet height 255 mm (Al) 150 mm (Al) Max tower height 25 m 25 m Max horizontal travelling speed 12 m/min 12 m/min Max vertical travelling speed 12 m/min 12 m/min Tower lift speed 18 m/min 18 m/min Tower pallet pulling speed 32 m/min 32 m/min Subject to change. Only specifications in our order confirmation are binding.