02-10 FIND A DEALER NEAR YOU A E V R E S E D U YO AT BELT F D GOO 697130 697145 2 Inch Shorty Open Belt Drive for Softails with Motor Plate BDL s new 2" belt drives feature their beefy one piece 6061-T6 polished billet motor plate, their new shorty starter housing and starter gear cover and their new side guard. These also include BDL s ball bearing lock up clutch. 697130 Polished fits all Softails 90-06 $1,488.99 697135 Polished fits all Softails 07-10 $1,768.99 697146 697141 697142 RevTech Open Belt Drives by BDL 2 Inch Shorty Open Belt Drive for Touring models with Motor Plate BDL s new 2" belt drives feature their beefy one piece 6061-T6 polished billet motor plate, their new shorty starter housing and starter gear cover and their new side guard. These also include BDL s ball bearing lock up clutch. With mount for heel-toe shifter. 697138 Polished fits FXR and Touring models 90-06 $1,954.99 697139 Black fits FXR and Touring models 90-06 $2,094.99 697141 Polished fits all Touring models 07-10 $1,949.99 697142 Black fits all Touring models 07-10 $2,094.99 RevTech and BDL have teamed up to produce this stunning, yet affordable belt drive unit. Fitted with BDL s patented ball bearing lock up clutch... a must for big inch motors. The RevTech belt drive by BDL is completely made in the USA and utilizes all of BDL s proven components. This kit includes a newly designed motor plate cut from 6061-T6 billet aluminum and then fully polished, double row sealed main shaft bearing, polished aluminum pulley covers and side plate, competitor clutch with Kevlar friction plates and newly designed ball bearing lock up pressure plate, starter jack shaft and housing. The kit comes complete with the standard pulley offset. For installation on wide tire applications you must purchase an additional pulley offset. RevTech 3" Open Belt Drive by BDL 697144 Black fits all Softail models from 90-06 $1,582.99 RevTech 2 5/8" Open Belt Drive by BDL We decided to go a little narrower on the later model drives, other than that the components are the same high quality used on the 90-06 models with the same awesome features listed above. 697145 Polished fits all Softail models from 07-10 $1,784.99 697146 Black fits all Softail models from 07-10 $1,925.99 Custom Chrome reserves the right to correct printed errors
FIND A DEALER NEAR YOU K&L Supply MC305 Wheel Stand This portable wheel trueing stand works on all motorcycle wheel sizes from 14" to 21" wheels. A wheel can be mounted on adjustable centering cones or ball bearings (using axle) for trueing and static balancing of wheels. Frame rails can be adjusted for wide rims/wheels. Lightweight, zincplated pressed steel frame. 6128621...Trueing/balancing stand $311.99 K&L Supply Adjustable Shop Dolly Convenient mobility when working on your bike. Designed to work specifically with the CCI #21004 Motorcycle Lift. Once your bike has been lifted clear of the ground, just roll the dolly into place under the bike and lower the lift until you can remove it. Features 15" maximum height, swivel neoprene wheels with adjustable base (13" to 20") and 1000 lb. capacity. 21000 Sold each $251.99 U.S. Patents 6,575,310 6,935,619 K&L Supply MC15R Cycle Dock Permits one person to load and unload a motorcycle in a trailer, pickup truck or service lift. Pivot mechanism uses the weight of the bike to hold itself upright, leaving your hands free to secure the bike. Simple in design and ruggedly built to last for a long time. Use supplied mounting rails to mount Dock into trailer or pickup. Rails mount to deck so you can slide the Dock out leaving just the mounting rails behind, freeing up your truck or trailer for other uses. Kit comes complete with two rockers (wide & narrow), Cradle stop (upright), mounting plate, support arm (with eyelets and adjustable feet) and two mounting rails. 641641 Complete kit $290.99 Note: The use of tie-downs is strongly recommended. K&L Supply MC450 Center Jack Stand Easy, scissor-type action lifts most motorcycles up to 1000 lbs. For use on ground or lift tables. 30115 Scissor lift $275.99 631452 Optional non-slip rubber pad $12.99 K&L Multi-Lift Motorcycle Lift Features locking neoprene casters, powdercoated finish, 16" of padded contact area, 4-ton bottle jack, tie-down anchors, heavy-duty 1200 lb. capacity, foot operated valve and locks. Fully adjustable from 4 1/2" to a maximum height of 17". 21004 Sold each $352.99 2
FIND A DEALER NEAR YOU Bolt-On Hardtail for Sportster Models A bolt-on unit lengthens the wheelbase by 4 1/2" and lowers the bike 4". The oil tank to use with this frame is a CCI #12599 08892 For Sportster models with mechanical rear brakes from 57-78 $209.99 Weld-On Hardtail for Sportster Models Fits early Sportster models with mechanical rear brakes. It forms an almost-perfect straight line with the frame backbone, and lengthens the motorcycle by 4" and lowers it 4". The oil tank to use with this frame is a CCI #12599. 08889 Fits Sportster models from 57-78 $209.99 CHECKOUT THE NEW JAMMER SECTION IN OUR 2010 CATALOG Weld-On Hardtail for Big Twins A quick and easy method of converting swingarm frames to rigid. It has the same wheelbase and ride height as stock. Oil tanks for this hardtail include CCI #s 12601, 12571, 12603, 12600, 12581, 12582 and 12585. CCI #12554 chain guard should also be used. 08893 Fits hydraulic drum brake 4-speed swingarm frames from 58-72 $224.99 Custom Rigid Frame for 45 s by Paughco Got a 45 engine, but not sure what to do with it? There s a lot of the old flatties out there, having been used in bikes and 3-wheelers produced for use by the military, police and delivery services for a 37 year period. The 45 design was simple and efficient, if not particularly powerful...but the weak link in the powertrain was the 3-speed tranny. This new single down-tube rigid frame by Paughco allows you to hook it up with a 4-speed tranny instead, letting you keep up with the pack! Frame is 0 Up, 0 Out and features a 30 degree rake. Specially designed engine sprockets for Big Twin dual row primary chains (available in 3 tooth sizes) allow the use of conventional 4-speed primary drive components, and a 4-speed tranny. Made in USA by Paughco. 634131 Custom Rigid Frame for 45 s $999.99 3
FIND A DEALER NEAR YOU 648009 648008 648007 648010 Handlebar Top Clamps Quality chrome die-cast handlebar clamps are available in two different styles. One has a decorative front skirt to help cover and fill in the back of the risers, and the other is a duplicate of the stock OEM unskirted clamp. All of these chrome clamps will fit any Original Equipment or Custom Chrome two-piece risers (except Springer Softail models) from 74-10. Fork Cup & Bearing Race Installation Tool by Vulcan Engineering Co. This tool is a must if you are installing raked fork cups. This tool will also install standard unraked fork cups and bearing races. For use with Big Twin models from 36-10 and Sportster models from 82-10 with 1" neck bearings. Made in the U.S.A. 697227 Raked/Standard fork cup installation tool $79.99 Standard Clamps - Black 648007 Finned $9.99 648010 Scalloped $9.99 648009 Plain $9.99 Skirted Clamps - Black 648008 Plain $9.99 Universal Tank Mount by Vulcan Engineering Milled from 1018 CF Steel, Not stamped! 1/4 Thick with mounting holes for use with standard rubber tank mounts Perfect for mounting custom gas tanks or any other applications you can come up with Made in the U.S.A. 668257 Universal tank mount 1/4 thick, sold each $10.99 Smooth Smooth Custom Ergonomic Lever Blades We have taken the standard wide lever blade and have smoothed the edges and rotated them approximately 10º which permits them to fit your hand more comfortably. The levers are available in three different styles and in either a chrome-plated or black powder coated finish. Levers include pivot bushings and anti-rattle clip. Sold in pairs Chrome Levers 648002 Smooth, fits all 07-10 XL Sportster models $31.99 648004 Smooth, fits all 04-06 XL Sportster models $31.99 Black Levers 648003 Smooth, fits all 07-10 XL Sportster models $27.99 648005 Smooth, fits all 04-06 XL Sportster models $27.99 4
FIND A DEALER NEAR YOU U.S. Patent #6,155,125 O6-Speed RevTech 6-Speed Overdrive Gear Sets Complete gear sets feature a close-ratio 2.94:1 first gear and.893:1 overdrive sixth gear. They re designed to fit into Original Equipment or aftermarket transmission cases and trap doors with absolutely no modifications. Complete gear sets include mainshaft, countershaft, split bearings, first thru sixth main and countershaft gears, shift cam, right shift tower assembly, shift forks, main drive gear seal and bearings, snap rings, thrust washers, main and countershaft nylon-inserted lock nuts, bearings, inner races, trapdoor gasket and a speedo pickup spacer. A chrome-plated billet 6-speed end cover with the RevTech 6-speed logo laser-etched into its surface is also included (except on CCI #58326). 58320 Fits all Evolution Big Twin models from 90-98 and 99 Softail models $666.99 Liquid Filled Oil Pressure Gauges Monitor the engines critical oil pressure with these eyecatching, custom faced gauges. Glass lens, polished stainless steel bezel. Chrome case filled with vibration damping fluid. 60 Pound Gauges 18264 Carbon fiber $24.99 18268 Engine-turned $24.99 100 Pound Gauges 18265 Carbon fiber $24.99 18269 Engine-turned $24.99 RevTech Oil Pump Kits Features include an improved oil pressure regulation system that ensures perfect oil control to all areas of the motor, especially during initial start-up. All the oil line fittings and mounting hardware are chrome-plated. The oil pump body and cover are highly polished and have a redesigned smooth outer surface with counterbored holes for the sockethead mounting hardware. The oil feed line can be routed to the stock location at the top of the cover or directly to the pressure gears through a fitting located at the bottom of the cover. Engines 70-80 will require a small drilling operation, and 70-72 engines will also need a plugging step. Each kit includes all the snap rings, keys, gaskets, shaft, fittings, mounting hardware (1/4"-24 early-style and 1/4"-20 late-style) and detailed instructions. 20275 Fits all Big Twin models from 73-91 (except Dyna Glide models) $199.99 20276 Fits all Big Twin models from 36-72 (except Flathead models) $199.99 Note: CCI # s 20275 and 20276 require CCI #20840 (S&S oil pump drill fixture kit) Kreem Combo Pack The Kreem tank prep products and sealer kit combine to create an excellent tank within a tank. Tank degreaser removes oil film from inside new tanks. The advanced sealer formula cures to a tough white skin which protects the inside of the tank from rust and corrosion. Resists leaded and unleaded gasoline, gasohol and octane boosters or fuel additives when used in recommended concentrations. Available in a complete kit which includes the sealer and the tank prep, or separately. Kreem tank mask protects paint finish on the exterior when treating the inside of the tank. 3991004 Combo Pack (prep and tank sealer) $36.99 3991012 Tank Prep only (two part mixture) $18.99 3991010 Tank Mask $14.99 Note: Due to D.O.T. regulations, these products cannot be shipped by air freight. 5
FIND A DEALER NEAR YOU 605185 605186 Küryakyn Glove Box Accents for Road Glides At first glance you ll notice the difference; glove box doors that stand out instead of disappearing into the flat black background. But besides the great look, this striking chrome trim also provides a finger catch to make opening the doors a snap - even with gloves on! 605189 Glove Box Accents for 98-10 Road Glide Models (pair) $49.99 605187 The Sound of Chrome Speakers by Küryakyn Perfectly designed 3" main speakers with additional tweeters for full bodied sound. The weatherproof bullet housing has powerful built-in true 50 watt amplifier & includes a volume & on/ off control switch. Convenient swivel adjustment gives you the freedom to position speakers in any direction you choose. With a full plug & play wiring harness, noise purifier & standard 3.5 mm jack, simply connect your ipod, MP3 player, satellite radio, personal CD player, etc, & ride on. 605315 Speakers for 1 1/4 bars $399.99 605316 Speakers for 1 bars $399.99 605188 Küryakyn Universal Handlebar Accessory Mounts 605190 Speaker Grills by Küryakyn Crank it up! While you re enjoying great travelin tunes, add some visual punch to your speakers. With these trick grills, your speakers will look as good as they sound! For all Electra and Street Glides. Sold in pairs. 605185 Zombie speaker grills $29.99 605186 Flame speaker grills $29.99 605187 Widow speaker grills $29.99 605188 Chauvinist speaker grills $29.99 605190 Speaker grills for Road Glide $49.99 Attach your cell phone, MP3 player and almost any portable device directly to your handlebars using this mount. The quick detach mounting plate leaves a simple clamp when it is not in use. Drilled with standard 4-hole AMPS pattern Includes hook-and-loop straps Accepts most belt clips 605124 Universal Handlebar Accessory Mount for 1 Handlebars Fits: All 1 Handlebars $49.99 605125 Universal Handlebar Accessory Mount for Clutch Brake Perch Mounts Fits 82-08 H-D Models $59.99 605126 Universal Handlebar Accessory Mount for 1 1/4 Handlebars Fits: All 1 1/4 Handlebars $49.99 6
FIND A DEALER NEAR YOU Küryakyn Fender Accents for Touring Models The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide and many CVO Screamin Eagle Touring Models look sharp, but could use a little flash. Our classy fender tips are the perfect chrome complement to these clean fenders. 605204 Front fender accent for all Street Glide, Road Glide, Road King Custom, & Screamin Eagle Dressers or Road Kings (except 07 FLHRSE) $31.99 605254 605253 Küryakyn Rear Fender & Saddlebag Accents The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide & many CVO Screamin Eagle Touring Models look sharp, but could use a little flash. Our classy fender tips are the perfect chrome complement to these clean fenders. Complete the look with the matching Rear Saddlebag Accents. 605253 Rear fender accents for all 98-08 Road Glides, 04-07 Road King Customs, 02-03 FLHRSE, 04-05 FLHTCSE, 06-08 FLHTCUSE $31.99 605254 Rear fender accents for all 93-10 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags $44.99 Switch Panel Accent by Küryakyn This trim places an attractive chrome frame around the ignition & the adjacent control switches. The smooth chrome surface is much easier to keep clean than the stock matte finish. Simple peel-&-stick installation requires no tools or disassembly. 605184 Switch accent panel $39.99 Firedome Spark Plug Covers by Küryakyn Firedomes are a quick and easy way to dress up the dull hex of your spark plugs. 605228 Firedomes for Shovel, Evo and Iron XL models $20.99 605229 Firedomes for Evo XL and Twin Cams $25.99 Headbolt Covers by Küryakyn Dress up your engine with either one of these styles of headbolt covers. Fit all models from 87-10. Sold in sets of four. 605226 Standard headbolt covers $20.99 605227 Stiletto headbolt covers $39.99 7
FIND A DEALER NEAR YOU Presorted Standard U.S. Postage PAID D-Mail Inc. 02-10 Küryakyn Vertical Mount Flag Holder Pride. Love of country. Respect. Whatever the reason you choose to display Old Glory or remember our P.O.W. s, these flags deserve to be displayed with honor & in their best light. Mount straight, securely, & with dignity. 1/2 verson fits most luggage racks or any 1/2 tubing including front fender rails. 3/4 verson fits saddlebag rails or any 3/4 tubing. American Flag is 6 x11 & P.O.W. MIA Flag is 6 x9. 605290 Universal vertical mount flag holder kit $69.99 Küryakyn License Plate Flag Holder Show your patriotism by adding this American flag to the license plate of almost any motorcycle. The mount bracket & support plate bolt in behind the license plate quickly & easily. The angle of the 12 staff can be adjusted without tools. Includes a 4 1/2 x 8 1/2 American flag. Universal application. Be sure motorcycle s license plate mount is sturdy enough to support force applied by flag at speed. 605289 Universal License plate flag holder kit $93.99 New 2010 Custom Chrome Catalog Now Available With Over 1400 Pages Packed with the World s Finest Products for Harley-Davidsons 2010 HARDCOVER CATALOG Küryakyn Flag, Pole & Holder Fly your flag proudly. Highly stylized holder with adjustable angle clamps sturdily onto any 1/2 diameter tubing. Use the flagpole included in the kit for a blended, one-piece look or insert your own pole - the tapered holder will secure a 1/4 to 3/8 flagpole. Comes with a 4 x 6 American flag. 605288 Flag, Pole and Holder for Racks or rails constructed of 1/2 tubing $79.99 18225 Serene Drive, Suite 150, Morgan Hill, CA 95037 8 Custom Chrome reserves the right to correct printed errors Copyright 2010 Custom Chrome A Division of DAE-IL USA, Inc.