www.kuhlmeyer.de
PORTAL-BELT-GRINDING MACHINE TYPE PBM with a right and a left machine stand equipped with adjustable hollow screws M30 for the tightening on the ground each stand with a vertical support on hardened double round guidings with ball screws and safety nut drive of each of the vertical supports by synchronized gear motors with P = 0,75 kw with a traverse between the machine stands in approx. 3200 mm height adjustable vertically way 1500 mm with a horizontal support on the vertical supports drive of the both horizontal supports by a synchronized gear motor with P = 0,55 kw horizontal drive way 650 mm left horizontal support with a worm gear drive swivel head for the grinding belt drive unit drive of the swivel head by a gear motor with P = 0,12 kw swivel angle 90 right horizontal support with grinding belt tensioning unit drive of the grinding belt by a frequency controlled motor with P = 4,0 kw belt speed adjustable between 5 and 25 m/s connection between the grinding belt drive and tensioning unit by a torsion free traverse, the pressure tool is positioned on a linear guiding on top of the traverse tool carrier with an adapter to change between the pressure pad and the contact drum manual use of the pressure tool by a hand lever with extraction spigot left at the grinding drive unit extraction spigot D = 200 mm, needed air consumption app. 3500 m³/h with safety hood at the tensioning unit and the top belt cover with a hydraulic scissors lift table, load 1500 kg, on a carrier carrier movable on 4 flanged wheels on 3 m rails movable way app. 2000 mm with locking break scissors lift table with a safety rip wire lift 1000 mm scissors lift table with round rails to carry sliding tables or handling devices either with smooth running prism rolls with an operator panel and a hand held remote control for the set up machine is complete installed (pneumatic, electric, hydraulic) www.kuhlmeyer.de
PORTAL-BELT-GRINDING MACHINE TYPE PBM with a right and a left machine stand equipped with adjustable hollow screws M30 for the tightening on PBM the ground 3 each stand with a vertical support on hardened double round guidings with ball screws and safety nut drive of each of the vertical supports by synchronized gear motors with P = 0,75 kw with a traverse between the machine stands in approx. 3200 mm height adjustable vertically way 1500 mm PBM with a 4horizontal support on the vertical supports drive of the both horizontal supports by a synchronized gear motor with P = 0,55 kw horizontal drive way 650 mm left horizontal support with a worm gear drive swivel head for the grinding belt drive unit drive of the swivel head by a gear motor with P = 0,12 kw swivel angle 90 right horizontal support with grinding belt tensioning unit drive of the grinding belt by a frequency controlled motor with P = 4,0 kw belt speed adjustable between 5 and 25 m/s connection between the grinding belt drive and tensioning unit by a torsion free traverse, the machine table size 1000 x 3000 mm scissors lift table 2500 x 1000 mm grinding belt dimension max. 120 x 9000 mm pressure tool is positioned on a linear guiding on top of the traverse tool carrier with an adapter to change between the pressure pad and the contact drum manual use of the pressure tool by a hand lever with extraction spigot left at the grinding drive unit extraction spigot D = 200 mm, needed air consumption app. 3500 m³/h machine table size 1000 x 4000 mm scissors lift table 3500 x 1000 mm grinding belt dimension max. 120 x 11000 mm with safety hood at the tensioning unit and the top belt cover with a hydraulic scissors lift table, load 1500 kg, on a carrier carrier movable on 4 flanged wheels on 3 m rails movable way app. 2000 mm with locking break scissors lift table with a safety rip wire lift 1000 mm scissors lift table with round rails to carry sliding tables or handling devices either with smooth running prism rolls with an operator panel and a hand held remote control for the set up machine is complete installed (pneumatic, electric, hydraulic) www.kuhlmeyer.de
www.kuhlmeyer.de
TOOL AUTOMATIC drive of the tools by a toothed belt by a frequency gear motor with P = 0,25 kw speed adjustable between 0,3 and 0,8 m/s pressure control of the contact drum or the pressure pad by pneumatic cylinder pressure control via constant counter pressure and adjustable working pressure connected by a supply drag chain www.kuhlmeyer.de