Senad Smaka Associate Professor in Electrical Power Engineering Telephone Academic Career

Similar documents
The Effects of Magnetic Circuit Geometry on Torque Generation of 8/14 Switched Reluctance Machine

ELEC 585/462 MOTOR DRIVE DYNAMICS COURSE OUTLINE & ASSESSMENT TECHNIQUES SEPT- DEC / FALL 2013 CRN 11254/11246

Comparison of different 600 kw designs of a new permanent magnet generator for wind power applications

Educational qualification:

Resume. Mahdi Hedayati (+98) RESEARCH INTERESTS

Future Trends for Power Systems

SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING

Curriculum Vitae. (March 2018)

837. Dynamics of hybrid PM/EM electromagnetic valve in SI engines

2007 Training: Basic training of AVL Fire software 2006 Seminar: Proactive approach of Croatian laboratories to the use of EU funds.

Marco W Migliaro - Publications

A simulation tool to design PV-diesel-battery systems with different dispatch strategies

Performance Comparison of 24Slot-10Pole and 12Slot-8Pole Wound Field Three-Phase Switched- Flux Machine

Procedia - Social and Behavioral Sciences 195 ( 2015 ) World Conference on Technology, Innovation and Entrepreneurship

Curriculum Vitae/Resume

The Role of Infrastructure Connected to Cars & Autonomous Driving INFRAMIX PROJECT

FACULTY PROFILE. Degree Branch / Specialization College University

IJENS-RPG [IJENS Researchers Promotion Group]

Royal Institute of Technology (KTH) S Stockholm Sweden

Effect of Permanent Magnet Rotor Design on PMSM Properties

Europass Curriculum Vitae

Low-Speed Autonomous Shuttle Project Summary

Bonded versus Sintered Interior PM Motor for Electric and Hybrid Vehicles

MacAuto Electric Machines and Vehicle Drive Systems Colloquium

Dynamic Behaviour of Asynchronous Generator In Stand-Alone Mode Under Load Perturbation Using MATLAB/SIMULINK

New Self-Excited Synchronous Machine with Tooth Concentrated Winding

Academic Course Description

Its Faculties. from which numerous degree programs in these fields of study are offered.

Chengbin Ma. Energy aware control, Vehicle dynamic control

Design of Fault Tolerant Control Technique for SRM Drive

SPEED AND TORQUE CONTROL OF AN INDUCTION MOTOR WITH ANN BASED DTC

CURRICULUM VITAE - Lisa Fiorentini

Mathematical Modeling and Simulation of Switched Reluctance Motor

FACULTY PROFILE. School/Collage. JNTU College of Engineering, Kakinada. National Institute of Technology, Warangal.

A Comprehensive Study on Speed Control of DC Motor with Field and Armature Control R.Soundara Rajan Dy. General Manager, Bharat Dynamics Limited

Artificial-Intelligence-Based Electrical Machines and Drives

Drink Driving in the EU

Drivetrain design for an ultra light electric vehicle with high efficiency

UNIVERSITÀ DEGLI STUDI DELL'AQUILA Prof. Marco Antonio Villani Curriculum scientifico. (Aggiornato il 9/11/2018)

ADR: Accord Européen Relatif au Transport International des Marchandises Dangereuses par Route

Utilization of Finite Elements Programs and Matlab Simulink in the Study of a Special Electrical Motor

UNIVERSIDAD CARLOS III DE MADRID

European Metrology Programme for Innovation and Research (EMPIR) Kamal Hossain EURAMET Chairperson

Energy efficiency policy - an innovation-based policy of the state and civil society

Clement A. Skalski, Ph.D., P.E.

International Journal of Advance Research in Engineering, Science & Technology

B.Shanker. 35 Years. S.No Degree University Year of passing 1 M.Tech. N.I.T.W 2007 Power Systems Engineering 2

COMMISSION FOR EXTRICATION AND NEW TECHNOLOGY

Design of Sensorless Controlled IPMSM with Concentrated Winding for EV Drive at Low speed

Comparison of IPM and SPM motors using ferrite magnets for low-voltage traction systems

Zhuang Xu. Contact. Biography. Expertise Summary. Teaching Summary. Refereed Journal Papers

IJSER. Aravind CV 1, Jagadeeswaran A 2, Ramesh GP 3

Design and Operation Characteristics of Novel 2-Phase 6/5 Switched Reluctance Motor

PV Off-Grid Market Trends and Business Opportunities in Southeast-Asia

CURRICULUM VITAE. Dr. PRAVEEN R.P. Professional Objective:

CURRICULUM VITAE. Name : Ali Kamil Makki Al-Shaikhli Place and Date of Birth : Baghdad, Iraq, 2 nd May 1950 Languages : Arabic and English

ENERGY STORAGE FOR A STAND-ALONE WIND ENERGY CONVERSION SYSTEM

International Journal of Advance Research in Engineering, Science & Technology. Comparative Analysis of DTC & FOC of Induction Motor

2016 JAPANESE AMERICAN LEADERSHIP DELEGATION TO JAPAN 16TH DELEGATION March 5 12, 2016

A ROTOR CONSISTING OF TWO IRON CYLINDERS FOR SWITCHED RELUCTANCE MOTORS

Bio-fuels and Electric Propulsion Creating Sustainable Transport in Tourism Resorts

A Comparative Analysis of Speed Control Techniques of Dc Motor Based on Thyristors

HYSYS System Components for Hybridized Fuel Cell Vehicles

DESIGN OF A NEW ELECTROMAGNETIC VALVE WITH A HYBRID PM/EM ACTUATOR IN SI ENGINES

SENSORLESS CONTROL OF BLDC MOTOR USING BACKEMF BASED DETECTION METHOD

Permanent Magnet Synchronous Generator Based Standalone Wave Power Conversion System for Sustainable Power Supply at Perhentian Island.

A Dual Stator Winding-Mixed Pole Brushless Synchronous Generator (Design, Performance Analysis & Modeling)

LIST OF OPEN TRAINING TRAINING PLANNER 2016/2017 Course location: Lagos, Abuja, Port Harcourt.

Volume II, Issue VII, July 2013 IJLTEMAS ISSN

Linear Induction Motor (LIMO) Modular Test Bed for Various Applications

National Conference on Latest Trends in Design & Testing of Transmission Line Components

An Open Standard for the Description of Roads in Driving Simulations

Keywords: Hybrid electric vehicle, free-piston generator, linear magnetic-geared machine, finite element analysis

Facility Employing Standard Converters for Testing DFIG Wind Generators up to 30kW

EU Interregional Cooperation

MIKLOS Cristina Carmen, MIKLOS Imre Zsolt UNIVERSITY POLITEHNICA TIMISOARA FACULTY OF ENGINEERING HUNEDOARA ABSTRACT:

AXIAL FLUX PERMANENT MAGNET BRUSHLESS MACHINES

International Journal of Scientific & Engineering Research, Volume 7, Issue 6, June ISSN

Performance Analysis of 3-Ø Self-Excited Induction Generator with Rectifier Load

Simulation and Analysis of Vehicle Suspension System for Different Road Profile

Curriculum Vitae ERIC S. DEYERL. Specialized Professional Competence. Education

Design and Flux-Weakening Control of an Interior Permanent Magnet Synchronous Motor for Electric Vehicles

PM Assisted, Brushless Wound Rotor Synchronous Machine

Lei Tang. Ph.D., Electric Power and Energy Systems, Iowa State University, expected Nov. 2013

EXPERIMENTAL VERIFICATION OF INDUCED VOLTAGE SELF- EXCITATION OF A SWITCHED RELUCTANCE GENERATOR

AEER - Electric Drives with High Efficiency and Low Environmental Impact

REPORT ON POWER FLOWS IN THE TRANSMISSION SYSTEM OF BOSNIA AND HERZEGOVINA IN 2016

Transient analysis of a new outer-rotor permanent-magnet brushless DC drive using circuit-field-torque coupled timestepping finite-element method

ELECTRIC VEHICLES DRIVE CONTROL THEORY AND PRACTICE

A Novel Integration of Power Electronics Devices for Electric Power Train

Closed Loop Control of Separately Excited DC Motor

Axial Flux Permanent Magnet Brushless Machines

HySolarKit: Convert conventional cars into hybrid solar vehicles

Whitepaper Dunkermotoren GmbH

Available online at ScienceDirect. Procedia Engineering 129 (2015 ) International Conference on Industrial Engineering

Toward the Realization of Sustainable Mobility

Construction of a Hybrid Electrical Racing Kart as a Student Project

Aspects of Permanent Magnet Machine Design

Performance Analysis of Brushless DC Motor Using Intelligent Controllers and Minimization of Torque Ripples

Analysis of Torque and Speed Controller for Five Phase Switched Reluctance Motor

Transcription:

Name Position E-mail Senad Smaka Associate Professor in Electrical Power ssmaka@etf.unsa.ba Telephone 033 25 58 49 Academic Career Employment Research and development projects Doctor of Science (Technical Science) Master of Science (Technical Science, Electrical, Electrical Machines and Drives) Undergraduate Degree (Electrical Engineer, Electrical Power ) Associate Professor Assistant Professor Senior Teaching Assistant Teaching Assistant Teaching Assistant Electrical Installations Designer and Head of the Group for Installation Attestation University of Zagreb, and Computing Faculty of Transport and Communications 2012. 2004. 1996. 2017. -... 2012. - 2017. 2006. - 2012. 2004. - 2006. 1999. - 2006. Unimont dd, Sarajevo 1996. - 1999. 1. ''Electrical power trains for electric and hybrid vehicles'', Partners: and Computer Science, University of Maribor, Slovenia;, Bosnia and Herzegovina; 2012/2013.. Funding: Governments of Slovenia and Federation of Bosnia and Herzegovina. 2. ''External Accreditation of the First Cycle Study Programme Electrical Power '', 2011/2012. Position: Team leader. Funding:, University of Sarajevo

3. ''Pilot External Accreditation of the First Cycle Study Programme Electrical Power '', ESABIH Tempus Project SMGR 158853 1 2009 1 BE, 2010/2011.. Cooperation with industry 1. ''Expertise in the Legal Affairs of the Applicant Građenje d.o.o Bihać Against the Defendant Public Utility Company JP Elektroprivreda BiH Electrical Distribution Company of Bihać'' (in, 2015/2016.. Funding: Municipal Court in Bihać. 2. ''The optimal load distribution of the public utility company JP Elektroprivreda BiH generators in a competitive environment'' (in, 2010. 3. ''Methods and Tools for Transmission Pricing'' (in Bosnian language), 2005. 4. ''Maintenance Strategy for Electrical Equipment'' (in Bosnian language), 2003. 5. ''Preparation of 10(kV) network for transition to 20(kV) voltage in the area of Electrical Distribution Company of Tuzla; Selection of priority areas, investment and implementation dynamics'' (in, 2002. 6. ''Transition to a new standard voltage in the low-voltage distribution network'' (in, 2002. 7. ''Urban Traffic Management and Control'', 2000. Funding: City Administration of Sarajevo Publications Published papers: 1. M. Ćosović, S. Smaka, ''Design of initial topology of interior permanent magnet synchronous machine for hybrid electric vehicle'', Proceedings of the International Electrical Machines and Drives Conference IEMDC 2015, pp. 1658-1664, 10 May - 13 May 2015, Coeur d'alene, USA. 2. S. Smaka, ''Fast Analytical Model for Switched Reluctance Machine'', IEEJ Journal of Industry Applications, Vol. 4 (2015), No. 4, pp. 352-359, The Institute of Electrical Engineers of Japan.

3. S. Smaka, Š. Mašić, M. Ćosović, ''Fast Analytical Model of Switched Reluctance Machine'', Proceedings of the 2014 International Power Electronics Conference - ECCE Asia - IPEC Hiroshima 2014, pp. 1148-1154, 18 May - 21 May 2014, Hiroshima, Japan. 4. S. Smaka, Š. Mašić, ''A Novel Approach to Analytically Modeling Switched Reluctance Machine'', Proceedings of the XXIV International Symposium on Information, Communication and Automation Technologies - ICAT 2013, 30 October - 01 November 2013, Sarajevo, BH. 5. S. Smaka, M. Ćosović, Š. Mašić, ''The Effects of Magnetic Circuit Geometry on Torque Generation of 8/14 Switched Reluctance Machine'', Proceedings of the XXIV International Symposium on Information, Communication and Automation Technologies - ICAT 2013, 30 October - 01 November 2013, Sarajevo, BH. 6. N. Oprašić, Š. Mašić, S. Smaka, ''Excitation parameters and stability of open loop operated self-excited switched reluctance generator'', Proceedings of the International Electrical Machines and Drives Conference IEMDC 2013, pp. 409-414, 12 May - 15 May 2013, Chicago, USA. 7. S. Smaka, S. Konjicija, Š. Mašić, M. Ćosović, ''Multi-objective design optimization of 8/14 switched reluctance motor'', Proceedings of the International Electrical Machines and Drives Conference IEMDC 2013, pp. 468-475, 12 May - 15 May 2013, Chicago, USA. 8. M. Ćosović, S. Smaka, I. Salihbegović, Š. Mašić, ''Design optimization of 8/14 switched reluctance machine for electric vehicle'', Proceedings of the 20 th International Conference on Electrical Machines - ICEM 2012, pp. 2654-2659, 2 September - 5 September 2012, Marseille, France. 9. S. Smaka, Š. Mašić, N. Hadžimejlić, M. Ćosović, ''Design considerations for novel 8/14 and comparison with conventional 8/6 and 8/10 switched reluctance machines'', Proceedings of the International Symposium on Power Electronics, Electrical Drives, Automation and Motion - Speedam 2012, pp. 614-619, 20 June - 22 June 2012, Sorrento, Italy. 10. S. Smaka, Š. Mašić, M. Ćosović, S. Konjicija, ''Multidimensional Performance Optimisation of Switched Reluctance Machines'', Proceedings of the XXIII International Symposium on Information, Communication and Automation Technologies - ICAT 2011, 27 October - 29 October 2011, Sarajevo, BH. 11. M. Ćosović, S. Smaka, Š. Mašić, I. Salihbegović, H. Steinhart, ''Design of Wound Rotor Low-Voltage Synchronous Generator'', Proceedings of the XXIII International Symposium on Information, Communication and Automation Technologies - ICAT 2011, 27 October - 29 October 2011, Sarajevo, BH. 12. S. Galijašević, Š. Mašić, S. Smaka, A. Akšamović, D. Balić, ''Parameter Identification and Digital Control of Speed of a Permanent Magnet DC Motors'', Proceedings of the XXIII International Symposium on Information, Communication and Automation Technologies - ICAT 2011, 27 October - 29 October 2011, Sarajevo, BH. 13. Š. Mašić, S. Smaka, I. Salihbegović, M. Ćosović, ''The Effects of Magnetic Circuit Geometry on Characteristics of Switched

Reluctance Motor'', Proceedings of the International Electrical Machines and Drives Conference IEMDC 2011, pp. 1427-1432, 15 May - 18 May 2011, Niagara Falls, Canada. 14. A. Bosović, Š. Mašić, S. Smaka, ''Computing and Measuring Dynamic Characteristics of the Induction Motor'', Proceedings of the 19 th International Conference on Electrical Machines - ICEM 2010, art. no. 5608196, 6 September - 8 September 2010, Rome, Italy. 15. S. Smaka, Š. Mašić, I. Salihbegović, M. Ćosović, ''Switched Reluctance Machines for Hybrid Electric Vehicles'', Proceedings of the 19 th International Conference on Electrical Machines - ICEM 2010, art. no. 5608220, 6 September - 8 September 2010, Rome, Italy. 16. Z. Hasković, Š. Mašić, S. Smaka, ''Visualization and animation of transformer, electrical machines and electrical drives working principles'', Proceedings of the International Symposium on Power Electronics, Electrical Drives, Automation and Motion - Speedam 2010, pp. 709-712, 14 June - 16 June 2010, Pisa, Italy. 17. Š. Mašić, M. Ćosović, S. Smaka, ''Computation of stand-alone synchronous generator characteristics using finite element method'' (in, Proceedings of the 9. Meeting of BH CIGRÉ Committee, R.A1.03., pp. 35-44, 27 September - 01 October 2009., Neum, BiH. 18. Š. Mašić, I. Salihbegović, S. Smaka, ''Computation of switched reluctance motor characteristics using finite element method'' (in, Proceedings of the 9. Meeting of BH CIGRÉ Committee, R.A1.00., 27 September - 01 October 2009., Neum, BiH. 19. M. Hajro, K. Sokolija, S. Smaka, ''Introduction of new standard voltages in distribution power networks'' (in, Proceedings of the 6. Meeting of BH CIGRÉ Committee, R.C6.14., 28 September - 02 October 2003., Neum, BiH. 20. M. Hajro, K. Sokolija, S. Smaka, ''Establishing a new voltage level of 20 (kv) in distribution power networks'' (in, Professional Information Magazine of Public Utility Company JP Elektroprivreda BiH, br. 76-78, May 2003, Sarajevo, BiH. 21. Š. Mašić, J. Čorda, S. Smaka, ''Computation of Static, Steady State and Dynamic Characteristics of the Switched Reluctance Motor'' - Original Scientific Paper, Korema Journal Automatika, br. 34, pp. 109-117, July 2002, Zagreb, Hrvatska. 22. Š. Mašić, Z. Avdagić, S. Smaka, ''Mathematical Model for Switched-Reluctance Motor Based On Matlab/Simulink Package'', Proceedings of the 15 th International Conference on Electrical Machines - ICEM 2002, 25 August - 28 August 2002, Bruges, Belgium. 23. Š. Mašić, N. Isabegović, S. Smaka, ''Static, steady-state and dynamic characteristics of switched reluctance motor ' (in Bosnian language), Proceedings of the 5. Meeting of BH CIGRÉ Committee, R.11.06., pp. 11-43 11-48, 23 September - 27 September 2001., Neum, BiH. 24. Š. Mašić, S. Smaka, ''Static, quasistatic and dynamic characteristics of the switched reluctance motor'', Proceedings of the 11 th International Conference of Electrical Drives and Power Electronics - EDPE, pp. 178-183, 9 October - 11 October 2000,

Dubrovnik, Croatia. 25. Š. Mašić, R. Gačanović, N. Isabegović, S. Smaka, ''Computation and experimental determination of flux linkage and static torque in switched-reluctance motor'', Proceedings of the 14 th International Conference on Electrical Machines - ICEM 2000, pp. 1586-1589, 28 August - 30 August 2000, Helsinki, Finland. 26. Š. Mašić, S. Smaka, ''Synchronous Motor Start-up Simulation Using Matlab/Simulink'' (in, Proceedings of the 4. Meeting of BH CIGRÉ Committee, R.11.01., pp. 11-5 11-12, 12 September - 16 September 1999., Neum, BiH. Published books: 1. S. Smaka, Š. Mašić, ''Special Electrical Machines'' (in bosnian language), University Edition, Publisher: in Sarajevo, Year: 2017, ISBN: 978-9958-629-65-5, COBISS.BH-ID: 24271110. 2. N. Behlilović, M. Hajro, S. Smaka, ''Electrical Circuits 1'' (in bosnian language), University Edition, Publisher: Faculty of Electrical in Sarajevo, Year: 2011, ISBN: 978-9958- 629-32-7, COBISS.BH-ID: 18036742. 3. Š. Mašić, S. Smaka, ''Electrical Drives'' (in bosnian language), University Edition, Publisher: in Sarajevo, Year: 2011, ISBN: 978-9958-629-44-0, COBISS.BH-ID: 18983430. 4. Š. Mašić, S. Smaka, ''Dynamics of Electrical Machines'' (in bosnian language), University Edition, Publisher: in Sarajevo, Year: 2011, ISBN: 978-9958-629-45-7, COBISS.BH-ID: 18983174. BH K CIGRÉ Member 1999. - Participation in specialist organizations IEEE Member 2006. - The commission for conducting expertise exam for electrical engineering (Federal Ministry of Justice) Member 2016. -