Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors can be selecte epening on the application. / an / Spee Reucers (RG-0, RG-0) can be connecte. Lubricating oil is require. PENCIL TYPE AIR GRINDER Durable an quiet high-efficient air griner. The Series also offers 0 egree an 90 egree moels. Choose the type that best fits your application requirements. Lubricating oil is require. ULTRA-PRECISION HIGH SPEED AIR TURBINE GRINDER Most suitable for elicate processing works ue to no lube air turbine hanpiece. ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 0 WEST DUARTE ROAD, #E MONROVIA, CA USA 90- Tel: () - Fax: () -00 Toll Free USA Tel: (00) - Fax: (00) -0 Email: info@artcotools.com p9
MODULAR TYPE HIGH TORQUE AIR GRINDER Air Driven ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" System Chart Moel Attachment RE00 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) RE0 RE0 RE0 RE0 RE0 RE0 Page -p Page -p Page -p9 Page -p9 Page -p9 Page -p9,000 min - (rpm) Max. ( ) 0,000 Page -p0 min- (rpm) Max. ( ) RE0,000 min - (rpm) Max. ( ) 0,000 Page -p0 min- (rpm) Max. ( ) LS0 0,000 min - (rpm) Max. ( ) 0,000 (rpm) Max. ( ) Page -p min- LS0,000 min - (rpm) Max. ( ) 0,000 (rpm) Max. ( ) Page -p min- LS0,000 min - (rpm) Max. ( ),000 Page -p min- (rpm) Max. ( ) RE00 IR-0 IH-00 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) IG-00 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) HG-00 0,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) BMH-00,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) MFC-00S,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) MFC-00M,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) IC-00 KC-00 LS-00 ML- SLS- HA-00 0.00 0.00.00 0.00 0.00 9.00.00.00.00.00.00.00 0.00 Page -p 0,000 min - (rpm) Max. ( ),000 Page -p min- (rpm) Max. ( ) Ring Type Lever Type Straight Type Torque Type Long Type 90 Mini Angle Type 90 Mini Angle Type (Very Small Hea) 90 Angle Type 0 Angle Type LUSTER (Reciprocating motion) MINI-LUSTER (Reciprocating motion) SWING-LUSTER (Right to Left motion) Hammer Action Type Spee Reucer Extension Joint Extension Joint RE00 CN-0,000 min - (rpm) Max. ( ),000 min - (rpm) Max. ( ) / Spee Reucer RO0 RG-0 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) / Spee Reucer RO0 RG-0 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) May be connecte between the motor an the attachment as require for increase torque. Air Motor with Chip Air Mechanism,000~0,000 min - (rpm) RO0A RO0 Air Line kit 0 IM-00 Air Motor with 0 Twist-Free Joint,000~0,000 min - (rpm) IM-0 AL-H0F This air line kit is esigne for use with the AFC- foot control, AF00..00 Page -p.00 Page -p 9.00 Page -p.00 Page -p.00 Page -p 90.00 Page -p p0 KBS0 KBS-0.00,000 min - (rpm) Max. ( Page ),000 (rpm) Max. ( ) -p min- FINE BELT SANDER Maximum Allowable Spee, continuous use may change epening on the material being cut an other application variables. : Maximum Allowable Spee, intermittent use. : Maximum Allowable Spee, continuous use. Foot Control AF00 AFC-.00 Page -p9
AMERICAN ROTARY TOOLS CO. www.artcotools.com Ultra-Precision High-Torque Air Griner 0,000 min- (rpm) High torque air motor assemble with special vane mechanism. Two types of air motors can be selecte epening on the application. / an / Spee Reucers (RG-0, RG-0) can be connecte. One Touch Tool Changing Ring Type (IR-0) Ring operate open/close chuck A Special Rotary Vane Air Motor is Incorporate The air motor is utilizes a special vane esign which keeps constant spee even uner loa proviing stable grining an polishing operation. Twist Free Hose To prevent twisting of the hose, 0 Twist- Free Joint connects the motor an the hose. ispee / / - 0,000rpm E000 ø0.0" Wie-range of Collet Sizes Various sizes ranging from ultra-small iameter (0. mm) are available for each attachment. Furthermore, collet replacement can be easily performe without wrench. Special Dust Protection Mechanism (patente) The chuck section of has a special built-in ust protection mechanism that prevents entry of foreign matter such as chips an provies superior urability..0" Attachment IR-0 + Air motor IM-0 Ring Switch Types of Attachments for All Types of Applications Capable of infinite applications with ifferent attachments. Interchangeable with attachments form the Emax EVOlution series. Assemble with ON/OFF, spee control an FWD./REV. control ring switch. Specifications Spee : Max. 0,000 min - (rpm) (PSI) Proper Air Pressure : ~PSI Air Consumption :.CFM Output Power : W (motor) Max. Torque :. cn m (PSI) Motor : Air motor IM-0 Dimensions : Air motor (IM-0) + Attachment (IR-0) See left figures Weight : Air motor (IM-0) + Attachment (IR-0) :. oz. ø0." ø0." ø0.9" Orer by catalog number. p
STANDARD SET STANDARD SET (Ring Type) ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" IR-0 The System is a han-hel griner with an energy saving air motor. Since it is an air riven system, there is virtually no heat generation resulting in excellent urability. Select from a variety of attachments epening on the application. 0,000 min - (rpm) The new ring type IR-0 is the stanar attachment for stanar set R0-IR. Stanar Equipment Moel R0-IR,090.00 Attachment IR-0 Motor IM-0 Air Griner (IM-0+IR-0) : pc. Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Air Line Kit (AL-H0F) : pc. Foot Control (AFC-) : pc. Hose for Piping (K-) ft : pc. Lubricating Oil (K-) : pc. Wrench ( x.) : pc. Pin Wrench (K-) : pcs. L Shape Wrench (9) : pc. AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - p
MOTOR AMERICAN ROTARY TOOLS CO. www.artcotools.com Motor for (Pneumatically Driven) Air motor esigne for high-efficiency To achieve high torque, air motor is assemble with micron precision between the vanes an the internal surface of cyliner using NAKANISHI's proprietary techniques. This high performance air motor with minimal power loss from loa fluctuation has excellent performance in its grining stability. Moreover, the motor with minimal air consumption runs quietly an the energy-saving mechanism makes it possible to operate with a hp (0.KW) air compressor. Air Cooling System generates no heat for a continuous operation The motor prevents heat generation an expansion of metal by air cooling system an provies stable rotation spee. Light-weight an compact esign The motor with attachment IR-0 is only. oz. Its light-weight an well balance esign provies excellent grining performance. Torque (cn m) IM-0 Performance Curve Air Pressure PSI Spee-Torque Characteristics (IM-0) Spee-Output Characteristics (IM-0) Spee-Torque Characteristics (IM-0+RG-0) Spee-Output Characteristics (IM-0+RG-0) 0 9 0 0 0 Output Power (W) ispee / Assemble with Spee Control an Forwar/Reverse Control Ring Forwar/Reverse Rotating Direction Control Ring locate at the en of the motor can control the motor spee as well. Spee control by Foot Control Fine ajustment of variable spee can be controlle by Foot Control. 0 0 0 0 Spee { x 0 min - (rpm) } 0 0 0 / - 0,000rpm E000 Excellent quietness with Silencer By attaching the silencer to the en of the exhaust air tubing, the motor is operate extremely quiet. RO0 RO0A AIR MOTOR IM-0 (with Twist-Free Joint Mechanism).9",000~0,000 min - (rpm) Air Motor with 0 Twist-Free Joint Mechanism Aopte Twist-Free Joint mechanism between the motor an the hose has solve the problem of hose twisting. Weight :.9 oz. excluing hose AIR MOTOR IM-00 (with Chip Air Mechanism).",000~0,000 min - (rpm) FWD/REV Rotating Direction Switch Ring FWD/REV Rotating Direction Switch Ring RO0 Hose (K-0) : ft IM-00 Silencer (K-09) Pin Wrench (K-) : pc. RO0A IM-0 Hose (K-0) : ft Silencer (K-09) Pin Wrench (K-) : pc. Air Motor with Chip Air Mechanism Air motor IM-00 with Chip Air mechanism blows away the cutting ust with clean air coming through the top en of the attachment. The hanhel cutting work remains cool by the chip air allowing comfort through out the working process. (This is only with the attachment IH-00) Weight :.9 oz. excluing hose.00.00 ø0." ø0." ø0.9" Orer by catalog number. p
Emax EVOlution & ATTACHMENTS ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" RE00 ø0.0" RE00 RE0 Lever Type Attachment RE0 RING TYPE ATTACHMENT IR-0 IR-0 LEVER TYPE ATTACHMENT IH-00 IH-00 Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench (K-) : pc. L Shape Wrench (9) : pc. Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench (K-) : pc. Perfectly esigne for powerful an elicate cutting an grining, an mae slim an light weight for comfortable gripping. Weight :. oz. Simple, no wrench bur replacement. Wrench is not require to exchange the chuck. Collet Stanar Size Perfectly esigne for powerful an elicate cutting an grining, an mae slim an light weight for comfortable gripping. Weight :.9 oz. Just turn the lever to exchange the bur. Wrench is not require to exchange the chuck. Collet Stanar Size : ø/" (CHH-.), ø. mm (CHH-.) Optional Collets : CHH-[][] are shown in page (-p) Ring Type Attachment ø0." 0."."." : ø/" (CHH-.), ø. mm (CHH-.) Optional Collets : CHH-[][] are shown in page (-p) Straight Type Attachment IG-00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) STRAIGHT TYPE ATTACHMENT IG-00." 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Collet ø/" (NKM-.) : pc. Collet Nut (CHN-) : pc. Wrench (9 x 9), ( x ) : pc. each Bar Wrench (PCR-0) : pc. 0.00 0.00 Light weight ergonomically esigne with minimal vibration for extene use. High precision NK Micron Collet for maximum tool retention. Weight :.9 oz. Collet Stanar Size : ø/" (NKM-.) Optional Collets : NKM-[][] are shown in page (-p).00 p AMERICAN ROTARY TOOLS CO. www.artcotools.com
RE0 TORQUE TYPE ATTACHMENT HG-00 The resistance prouce by cutting an grining is absorbe by a special rubber grip to eliminate slipping. Chuck is tightene by a Wrench. Weight :. oz. Collet Stanar Size : ø/" (CHG-.) Optional Collets : CHG-[][] are shown in page (-p) Torque Type Attachment Use mm torque Type HG-00 to connect ENK-0T Please use it with Spee Reucer. ( Air Motor) ø0." RE0 0." RE0 HG-00.0" Collet ø/" (CHG-.) : pc. Wrench (0 x 0) : pc. Bar Wrench (K-) : pc. Pin Wrench (K-) : pc. For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-00S 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø. mm Please use it with Spee Reucer. ( Air Motor) ø0." RE0.".",000 min - (rpm) Max. ( ),000 min - (rpm) Max. ( ) Ieal for chamfering an eburring the insie of slit pipe. Minimum Inner Diameter : Weight :. oz. Stanar Collet : ø. mm (K-) Spee Reuction Ratio : 0/ RE0 0." RE0." ø0." MFC-00S For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-00M 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø. mm (Very Small Hea) Please use it with Spee Reucer. ( Air Motor) RE0 MFC-00M For Deep Hole Grining LONG ATTACHMENT BMH-00." Long Attachment for Deep Hole Grining.".",000 min - (rpm) Max. ( ),000 min - (rpm) Max. ( ) Collet ø. mm (K-) : pc. Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc. Collet ø. mm (K-) : pc. Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc. This unique slim boy makes it ieal for cutting an grining the bottom surface of eep ribs or holes. Weight :.0 oz. Wrench is not require to exchange the chuck. Collet Stanar Size : ø/" (CHM-.) Optional Collets : CHM-[][] are shown in page (-p) RE0,000 min - (rpm) Max. ( ),000 min - (rpm) Max. ( ) BMH-00,000 min - (rpm) Max. ( ),000 min - (rpm) Max. ( ) Collet ø/" (CHM-.) : pc. Wrench ( x.), ( x.) : pc. each Pin Wrench (K-) : pc. 0.00 0.00 9.00 The smallest 90 Angle type hea is suitable for chamfering an eburring the insie of the slit pipe. Minimum Inner Diameter : ø0." Weight :. oz. Stanar Collet : ø. mm (K-) Spee Reuction Ratio : 0/.00 ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" Maximum Allowable Spee, continuous use may change epening on the material being cut an other application variables. : Maximum Allowable Spee, intermittent use. : Maximum Allowable Spee, continuous use. Orer by catalog number. p9
Emax EVOlution & ATTACHMENTS & ACCESSORIES RE0 90 ANGLE ATTACHMENT IC-00 ø0.0"." Drive Motor & Controller ispee / / - 0,000rpm E000 0.0" 90 Angle attachment with ø/" (ø. mm) Collet. Most suitable for polishing flat surfaces, corners an internal surfaces of pipes with paper isk mounte on rubber pa. Reuction Ratio : / Weight :.9 oz. Collet Stanar Size : ø/" (CHC-.) Optional Collets : CHC-[][] are shown in page (-p) RE0 0.9",000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Electric Motor (ENK-0S) (ENK-0T) 90º Angle Attachment Please use it with Spee Reucer. ( Air Motor) RE0 Emax EVOlution Controller (NE9 0) IC-00 0 ANGLE ATTACHMENT KC-00 ø0.0"." or Air Motor (IM-0) Collet ø/" (CHC-.) : pc. Stanar Accessories : set Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc. Air Line Kit (AL-H0F) & AFC- Page -p Page -p Page -p Page -p Drive Motor & Controller.00 ø0." ø0." ø0.9",000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Electric Motor (ENK-0S) (ENK-0T) Emax EVOlution Controller (NE9 0) or Air Motor (IM-0) Air Line Kit (AL-H0F) & AFC- Page -p Page -p Page -p Page -p Ieal for the work at 0 angle, especially corners an eep concaves. Use the motor in reverse rotation for clockwise rotation. Spee Reuction Ratio : / Weight :.9 oz. Collet Stanar Size : ø/" (CHC-.) Optional Collets : CHC-[][] are shown in page (-p) Stanar Accessories for IC-00 an KC-00 0º Angle Attachment Please use it with Spee Reucer. ( Air Motor) RE0 KC-00 Collet ø/" (CHC-.) : pc. Stanar Accessories : set Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc..00 Description Moel O.D. Grits Q'ty (Small) RE9 ø 0mm (ø 0.9") _ Rubber Pa (Me) RE9 ø 0mm (ø 0.9") _ (Large) RE9 ø 0mm (ø.") _ LS090 S-0 ø mm (ø 0.") # 0 LS090 S-00 ø mm (ø 0.") # 00 Sanpaper Disk RE0 M-0 ø mm (ø 0.") # 0 RE0 M-00 ø mm (ø 0.") # 00 RE90 L-0 ø mm (ø.") # 0 RE90 L-00 ø mm (ø.") # 00 p0 Maximum Allowable Spee, continuous use may change epening on the material being cut an other application variables. : Maximum Allowable Spee, intermittent use. : Maximum Allowable Spee, continuous use.
Optional Accessories for IC-00 an KC-00 Rubber Pa Prouct Description Moel O.D. Grits package Rubber Pa (Small) RE9 ø0 mm (ø0.9") _ pc./pack.00 ispee Rubber Pa (Me) RE9 ø0 mm () _ pc./pack.00 / / - 0,000rpm E000 Rubber Pa (Large) RE9 ø0 mm () _ pc./pack.00 Sanpaper Disk (Paper Type for Metals, Ahesive Back) Prouct Description Moel O.D. Grits package LS0900 S-00 # 0 LS090 S-0 # 0 LS090 S-0 # 0 LS090 S-0 # 0 Sanpaper Disk LS090 S-0 # 0 ø mm (ø0.") for small pa LS090 S-00 # 00.00 LS090 S-00 # 00 LS09 S-00 # 00 LS09 S-00 #,000 LS09 S-0 #,00 RE00 M-00 # 0 RE0 M-0 # 0 RE0 M-0 # 0 RE0 M-0 # 0 Sanpaper Disk RE0 M-0 # 0 00 ø mm (ø0.") for me. pa RE0 M-00 # 00 pcs./pack.00 RE0 M-00 # 00 RE M-00 # 00 RE M-00 #,000 RE M-0 #,00 RE900 L-00 # 0 RE90 L-0 # 0 RE90 L-0 # 0 RE90 L-0 # 0 Sanpaper Disk RE90 L-0 # 0 ø mm (ø.") for large pa RE90 L-00 # 00.00 RE90 L-00 # 00 RE9 L-00 # 00 RE9 RE9 L-00 L-0 #,000 #,00 ø0." ø0." ø0.9" Orer by catalog number. p
Emax EVOlution & ATTACHMENTS The Features of LUSTER NLS-0 (Built-in Motor).9" Stroke Range : 0~ mm ajustable by stroke cam ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" NAKANISHI Smart Switch High Power LUSTER (NLS-0) is a powerful reciprocating stroke polisher equippe with / Spee Reucer to multiply the torque by times. rubber-grip Well balance, rubber-grip absorbs vibration from reciprocating strokes reucing fatigue an allowing long, continuous operation. ø.0" Reciprocating Stroke : 0~,00 times/min. Fully ajustable. Ultra-Precision Griner All important parts are harene by heat treatment to provie excellent urability. Designe with comfortable The Features of LUSTER LS-00.9".9" The tilt angle of grinstone arbor is ajustable. The grining surface can be set at any angle between 0 an 0 enabling grining of bottom, right, left an top surfaces without moving the machine itself. Controller Weight : lb.. oz. (w/o cor) Max. tool shank iameter ø0.", Screw clamp type. Various types of attachment tools are provie as stanar accessories. Reciprocating Motion Polishing Finisher LUSTER NLS-0 Stanar Accessories : set Allen Wrench ( mm), ( mm) : pc. each Lubrication Oil Lubrication Nozzle for LUSTER 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) Emax EVOlution Controller (NE9 0) Page -p,.00 Stroke Range : 0~ mm ajustable by stroke cam." The tilt angle of grinstone arbor is ajustable. The grining surface can be set at any angle between 0 an 0 enabling grining of bottom, right, left an top surfaces without moving the machine itself. Drive Motor & Controller p High Power LUSTER (LS-00) is a powerful reciprocating stroke polisher. Reciprocating Stroke : 0~,00 times/min. Fully ajustable. Ultra-Precision Griner All important parts are harene by heat treatment to provie excellent urability. Designe with comfortable rubber-grip Well balance, rubber-grip absorbs vibration from reciprocating strokes reucing fatigue an allowing long, continuous operation..9" Electric Motor (ENK-0S) (ENK-0T) Weight : lb..99 oz. Max. tool shank iameter ø0.", Screw clamp type. Various types of attachment tools are provie as stanar accessories. Reciprocating Motion Miniature Polisher LUSTER LS0 Emax EVOlution Controller (NE9 0) LS-00 or Stanar Accessories : set Allen Wrench ( mm), ( mm) : pc. each Lubrication Oil Lubrication Nozzle for LUSTER 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) Air Motor (IM-0) Air Line Kit (AL-H0F) & AFC- Page -p Page -p Page -p Page -p.00
The Features of MINI-LUSTER ML- ø0.9"."." Reciprocating Stroke (variable) : Approx 0~9,000 times/min. Stroke Range (fixe) : 0. mm. Due to pencil type grip, it is most suitable for polishing narrow grooves, etails, etc. Lightweight, compact esign an minimal vibration keep the han free from fatigue for long continuous operation. By using the grinstone holer provie, various tools such as oil stone, super stone, iamon files, etc. can be use. Electric Motor (ENK-0S) (ENK-0T) Drive Motor & Controller Emax EVOlution Controller (NE9 0) or Air Motor (IM-0) Air Line Kit (AL-H0F) & AFC- Page -p Page -p Page -p Page -p Weight :. oz. Max. tool shank iameter ø0.", Screw clamp type. Various attachment tools an holers are provie as stanar accessories. Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment Moel Stroke Range Stanar Accessories LS0 ML- 0.mm Allen Wrench (. mm) : pc. Stanar Accessories : set,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ).00 ispee / / - 0,000rpm E000 The Features of SWING-LUSTER SLS- ø0.9"."." High spee grining an polishing operations can be performe while maintaining the fine an elicate feeling of han polishing. Lightweight pencil type esign makes it easy to work in tight areas. Ergonomically esigne to provie high sensitivity for precision work. Easily ajustable stroke length allows efficient work on minute areas or large sections. Weight :.00 oz. Reciprocating Stroke (variable) : 0~9,000 times/min Stroke range (variable) : 0~. mm Max. tool shank iameter ø0.0", Screw clamp type. Electric Motor (ENK-0S) (ENK-0T) Drive Motor & Controller Emax EVOlution Controller (NE9 0) or Air Motor (IM-0) Air Line Kit (AL-H0F) & AFC- Page -p Page -p Page -p Page -p Pencil-Type Reciprocating Polishing Finisher SWING-LUSTER Attachment LS0 SLS- Wrench ( x ), (0 x ) : pc. each Allen Wrench (. mm) : pc. Stanar Accessories : set,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) Please use it with Spee Reucer. ( Air Motor).00 ø0." ø0." ø0.9" Maximum Allowable Spee, continuous use may change epening on the material being cut an other application variables. : Maximum Allowable Spee, intermittent use. : Maximum Allowable Spee, continuous use. Orer by catalog number. p
Emax EVOlution & ACCESSORIES Tool an stanar accessories for LUSTER, MINI-LUSTER, SWING-LUSTER Prouct Moel (Package) Each prouct is provie with tool as stanar. LUSTER NLS-0 / LS-00 ELS-00 MINI-LUSTER ML- / EML- SWING-LUSTER SLS- ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" Max. clampable size : Thickness 0." x with 0." Max. clampable size : Thickness 0." x with 0." 0.0" 0." [] [] [] []." Max. clampable size : ø0." 0." Thickness 0.0" x with 0." 0.0" 0.9"." 0.9" 0."."." 0.".9" 0.9".0".0" ø0." ø0." 0." 0.0" ø0." ø0." ø." 0." Grinstone Holer VES Grinstone Holer VEA Tool Holer with Spring FVA Rectangular Pa LKE-A Ro for Rectangular Pa FBA- Angle Ro NGA Diamon Grinstone DLA x -00 Ceramic Fiber Grinstone Holer LS0 LS0 LS0 LS09 LS0 LS0 LS09 0.00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) 0.0"0.".9" Ceramic Fiber Grinstone (#,00) 0.00 ( pcs./pack) ( pc.) ( pc.) Illustration Usage [] [] [] [] [] AMERICAN ROTARY TOOLS CO. www.artcotools.com p Orer by catalog number.
Emax EVOlution & ATTACHMENTS & ACCESSORIES AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - The Features of HA-00." Drive Motor & Controller ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" ø0." Stroke spee : ~,000 strokes/min A wie variety of patterns can be prouce by varying the spring pressure an hammer spee. Light weight, pencil type grip makes the hanpiece very comfortable to hol an easy to use. Ajustable spring pressure. Self lubricating hammer mechanism ensure excellent urability. Weight :. oz. Stroke range : 0. mm Stroke Spring Pressure :.~.N (Ring Ajustment Type) The Features of FINE BELT SANDER KBS-0." Polishing a flat surface Electric Motor (ENK-0S) (ENK-0T) Emax EVOlution Controller (NE9 0) or Air Motor (IM-0) Drive Motor & Controller Air Line Kit (AL-H0F) & AFC- Page -p Page -p Page -p Page -p Engraving an Ornament Processing Work Hammer Attachment RE00 HA-00 Wrench ( x.) : pc. Bar Wrench (K-) : pc. Oil an Oil offer machine Hammer Bit (For replacement) : pcs. 0,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) Please use it with Spee Reucer. ( Air Motor) Hammer Bit to be machine to require shapes (SUS-0, heat treate, approx, HRC0) Prouct Package RE0 pcs./pack 0.00 0.00 Polishing a curve surface Belt runs Approx. 0~,00 ft/min mm, mm an mm with belts are available. The angle of the belt section is fully ajustable. Exchanging the belt is simply one by lever release. Weight :. oz. Light-weight, compact, minimal vibration an a small iameter grip esign keep the han free from fatigue for long, continuous operation. When polishing a curve surface, the tension between the front an central pulley can be utilize. When polishing a flat surface or a groove, use the flat part of belt. Electric Motor (ENK-0S) (ENK-0T) Emax EVOlution Controller (NE9 0) or Air Motor (IM-0) Air Line Kit (AL-H0F) & AFC- Page -p Page -p Page -p Page -p FINE BELT SANDER Attachment KBS0 KBS-0 mm Belt ( kins pcs. each) mm Belt ( kins pcs. each) mm Belt ( kins pcs. each) Allen Wrench ( mm) : pc.,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ).00 p Maximum Allowable Spee, continuous use may change epening on the material being cut an other application variables. : Maximum Allowable Spee, intermittent use. : Maximum Allowable Spee, continuous use.
Belt for FINE BELT SANDER (Ring Type) Prouct Description Grit With (mm) Length (mm) Package (Package) 90 90 90 # # # 0 0 0 W mm mm mm San Belt San Belt for Woo Zirconia Belt Diamon Belt (Har Type) Diamon Belt (Soft Type) 90 90 90 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 0 # 00 # 00 # 00 # 0 # 0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 00 # 00 # 00 0 #,000 00 0 pcs./pack mm Felt Belt 0 00 pcs./pack.00 00 00 00 00 00 0 pcs./pack pcs./pack pcs./pack pcs./pack pcs./pack.00.00 9.00.00.00.00 ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - Orer by catalog number. p
Emax EVOlution & SPEED REDUCER & ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" ø0." RO0 Spee Reucer (/) SPEED REDUCER RG-0 TORQUE UP TIMES (/ Spee Reucer) The spee is reuce to / but the torque is multiplie by times. Weight :.0 oz. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) RO0 RG-0 Pin Wrench (K-) : pc. ø0."." RE00.9" 0 EXTENSION JOINT CN-0 (Spee : ).00 FOOT PEDAL FC- ø0." RO0." The spee is reuce to / but the torque is multiplie by times. Weight :. oz. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) Spee Reucer (/) SPEED REDUCER RG-0 RO0 RG-0 Pin Wrench (K-) : pc. TORQUE UP TIMES (/ Spee Reucer) Extension Joint (Spee : ) RE00 CN-0 Pin Wrench (K-) : pc. 9.00 This is a joint to be connecte between a motor an an attachment to exten the total length of the attachment. Weight :.9 oz.,000 min - (rpm) Max. ( ),000 (rpm) Max. ( ) min-.00 Use as an ON/OFF switch as well as a variable spee control. Foot Peal Moel 0 FC- Emax EVOlution (NE9) 0.00 AMERICAN ROTARY TOOLS CO. www.artcotools.com p Maximum Allowable Spee, continuous use may change epening on the material being cut an other application variables. : Maximum Allowable Spee, intermittent use. : Maximum Allowable Spee, continuous use.
Emax EVOlution & ACCESSORIES [] [] [] [] Common Tools for LUSTER, MINI-LUSTER." L 0." 0.0" 0." 0." Prouct Description Moel 0.9" 0.9"."." L 0.9".0".".0" 0." ø0." ø0." ø0." ø0." ø0." 0.0" LS 0 LS 0 ZO 900 900 900 ZO 900 LS 0 LS 0 LS 0 LS 09 Grinstone Holer VEA for (W 0." x T 0.") Grinstone Holer VES for (W 0." x T 0.") Holer for Super Stone SH-0 (L=0.0") (L=.0") SH- (L=0.") (L=0.9") SH- (L=0.") (L=0.") Oil Stone Lapping Stick Holer for (W 0." x T 0.") Tool Holer with Spring FVA Angle Ro NGA Ro for Lapping FBA- LKE-A with Hinge Use with FBA-.00.00.00.00.00.00.00.00 ø0.0" 0." 0." Prouct Description Moel Sanpaper Disk 0." Sanpaper 0.9" 0." 0.9" 0.9" 0.0" Super Stone 0." 0.0" 0." 0.0" Super Stone.9" Super Stone ø0." 0.".9".9" LS0900 LS090 LS090 LS090 LS090 LS090 LS090 LS09 LS09 LS09 LS099 LS09 LS09 LS09 LS099 LS09 LS09 LS09 LS09 LS09 LS LS0 LS0 LS09 LS LS0 LS0 LS0 LS0 LS0 LS0 LS0 S-00 # 0 S-0 # 0 S-0 # 0 S-0 # 0 S-0 # 0 S-00 # 00 S-00 # 00 S-00 # 00 S-00 #,000 S-0 #,00 K-0 # 0 K-0 # 0 K-0 # 0 K-00 # 00 K-00 # 00 K-00 #,000 K-0 #,00 DLA--00 DLA x -00 DLA x -00 Black # 00 Blue # 00 White #,000 Re #,00 Black # 00 Blue # 00 White #,000 Re #,00 Black # 00 Blue # 00 White #,000 Re #,00 00 pcs. Package.00 00 pcs. Package.00.00.00 0.00.00.00.00.00.00.00 ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" [] 0." 0." LS LS 0 Hinge (Diamon) DLC- x -00 Ball Joint LAA-A Use with SEV LS Ball Joint (with Diamon) ø0.9" DLD-0/0. []~[] : Please See Page -p for Illustration Usage. 0.0" 0." ø0.9" : Other than note, prices are per piece. : Available while supply lasts. Check with NSK America..00.00.00 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - Orer by catalog number. p9
< > COLLET CHA Group CHC Group ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" ø0.9" ø0.9" 90 90 90 RA0 RA0 RA0 RA0 RA0 RA0 RA RA RA09 9 RA0 RA RA RA 9 9 RA RA RA RA 9 RA RA9 RA 99 RA0 RA 99 9 9 9 RA 9 9 9 99 RA9 99 0." 0." 0." Moel : CHA-.0, CHA-.0, CHA-.0AA, CHA-., CHA-.AA, CHA-.0, CHA-.0AA Moel : Besies the above : K- : CHN-A A-00 A-0 A-00 A-0 A-0 ABS-00 ispee -9 0 S-9 0 NR-00S NRA-00 NR-0 PS0-0/0 PS0S-0 PSA-0/0 PSAS-0 P-00A BANTAM 0 0 00 000 S EM0-S000 EM-S000 E-00A NR00-AQC NRR00-QC 0 00 00-000 Moel Insie Diameter CHA-0. ø0. CHA-0. ø0. CHA-0. ø0. CHA-0. ø0. CHA-0.9 ø0.9 CHA-.0 ø.0 CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-.9 ø.9 CHA-.0 ø.0 CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-.9 ø.9 CHA-.0 ø.0 CHA-.0AA ø.0 CHA-. ø. CHA-. ø/" CHA-.AA ø/" CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-.9 ø.9 CHA-.0 ø.0 CHA-.0AA ø.0.00.00 0.00.00.00 0.00.00 0.00.00 0.00.00 0.00.00.00 0.00.00.00 0.00.00 0.00.00.00 CHF Group NR-00 CHG Group 0." IC-00 KC-00 EIC-00 EKC-00 IC-E KC-E 90 909 900 909 90 99 Moel CHC-. CHC-. CHC-.0 CHC-.." Moel CHF-.0 CHF-.." HG-00 NR-0 EHG-00 NR-0 RA RA RA RA0 RA RA RA RA RA9 RA9 RA09 RA RA Moel CHG-.0 CHG-. CHG-. CHG-.0 CHG-. CHG-. CHG-.0 CHG-. CHG-.0 CHG-. CHG-.0 CHG-.0 CHG-. Insie Diameter ø. ø. ø.0 ø/" Insie Diameter ø.0 ø/" Insie Diameter ø.0 ø. ø. ø.0 ø. ø. ø.0 ø/" ø.0 ø. ø.0 ø.0 ø/".00 9.00.00.00.00.00.00.00.00.00.00.00 CHB Group." NRR- NRR-00 NR0-00 ATC 90 90 99 90 Moel CHB-.0 CHB-.0 CHB-. CHB-.0 Insie Diameter ø.0 ø.0 ø/" ø.0 9.00 CHH Group." IH-00 IR-0 EHL-0 EHR-0 EHR-00 VH-E RE9 90 RE9 RE RE 90 RE9 RE0 Moel CHH-.0 CHH-. CHH-. CHH-.0 CHH-. CHH-. CHH-.0 CHH-. Insie Diameter ø.0 ø. ø. ø.0 ø. ø. ø.0 ø/".00 9.00.00 9.00 p AMERICAN ROTARY TOOLS CO. www.artcotools.com
< > COLLET CHM Group CHS Group." 0.9" ispee / / - 0,000rpm E000 ø0." ø0." ø0.9" MH-00 BMH-00 NR-00 NR-0 AMH-00 AMH-0 RE0 RE00 RE09 RE0 RE09 RE0 Moel CHM-.0 CHM-. CHM-.0 CHM-. CHM-.0 CHM-. CHP Group." ENR-0 ATC NRR-0 NR-0E ATC AS AS AS CHR Group Moel CHP-.0 CHP-.0 CHP-.." Insie Diameter ø.0 ø. ø.0 ø. ø.0 ø/" Insie Diameter ø.0 ø.0 ø/" NR-00E ATC NR-0E ATC NR0-00 ATC 990 990 999 990 990 999 Moel CHR-.0 CHR-.0 CHR-. CHR-.0 CHR-.0 CHR-. Insie Diameter ø.0 ø.0 ø/" ø.0 ø.0 ø/".00 9.00.00.00 9.00.00 9.00 ERA-0 SERIES RA-00 RA-E RA- RA-H NK0 9009 NK0 90 90 90 90 NK09 NK00 90 90 909 NK0 90 90 90 NK0 NK0 NK0 90 90 90 NK009 NK0 NK00 Moel CHS-0. CHS-0.9 CHS-.0 CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-.9 CHS-.0 CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-.9 CHS-.0 CHS-. CHSS Group E-00S P-0S 900 90 900 909 90 900 909 0.9" Moel CHSS-.0 CHSS-. CHSS-.0 CHSS-. CHSS-. CHSS-.0 CHSS-. Insie Diameter ø0. ø0.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø.0 ø/" Insie Diameter ø.0 ø. ø.0 ø. ø. ø.0 ø/" 90.00 9.00.00.00.00 9.00.00.00.00 9.00.00.00 9.00.00 CHR RS Group." NR-00E ATC NR-0E ATC NR0-00 ATC-RS 90 90 90 90 90 Moel CHR-.0 RS CHR-. RS CHR-.0 RS CHR-.0 RS CHR-. RS Insie Diameter ø.0 ø/" ø.0 ø.0 ø/" 0.00 p AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) -