200 Series M-220 & M-222 2-Valve Manifolds The model M-220 2-Valve Manifold is designed for remote mounting of a static or gauge transmitter. This design permits the user to mount each unit separately in convenient and accessible locations. The model M-222 2-Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location. Both manifolds have bonnet labels that designate the isolation and vent valves. Standard materials are arbon Steel and 316 SS, with exotic materials available for severe applications. All flanged manifolds are supplied with two Teflon seal rings and four mounting bolts as standard. eatures TM Patented Teflon Pressure-ore Stem Seal Leak-free performance No maintenance requirements 5 year warranty against stem seal leaks Standard arbide Ball Seat Non-rotating ball eliminates seat galling or creasing to create bubble-tight seating All 316 SS Manifolds onform to NAE (M-01-75) as Standard educes lead times and inventory cost Improves inventory safety Seal Below Stem Thread Prevents media contamination of stem threads and lubricant wash-out Positive Back Seat Design Prevents accidental blow-out or stem removal while operating Provides secondary seal in full open position Bracket Mounting oles (Standard) When used with the optional bracket, manifold can mount to a 2 pipe stand or flat surface to facilitate installation and removal of transmitter ISO 9001 ertified Quality System
200 Series 2-Valve Manifolds STYLE ard Seat SEAT STEM SEAL M-220 - M-222 - OPTION S VENT/ TEST [Std.] arbon Steel [Std.] 316 SS astelloy- S M 6 N AD SEAT arbon Ball [Std.] eramic Ball 316 SS Ball astelloy- Ball K- Ball STEM SEAL [Std.] Teflon Pressure-ore TM T Grafoil Packed G Viton O-ing V Teflon Packed P Low-Temp Pressure-ore TM J NOTE: Optional materials, accessories and documentation available upon request. GA T V VS W XL X OPTION DESIPTION Anti-Tamper Bonnets ydrostatic Testing arbon Steel Manifold Bracket Stainless Steel Manifold Bracket Safety Bonnet Lock Plate lean for Oxygen Service lean for hlorine Service PAT DESIPTION Body Bonnet Stem Seal etainer andle Assembly Plug(s) Mounting Bolts ABON STEEL 316 SS MONEL ASTELLOY- ASTM A108-1215 or ASTM B164-N04400 ASTM B575-N10276 or ASTM A494 W-12MW ASTM A108-1215 ASTM A582-303 ASTM A108 ASTM B165-N04405 ASTM A108 ASTM A182- (18-8) ASTM A449-TYPE1 ASTM A449-TYPE1 ASTM 593 (18-8) ASTM 593 (18-8) MATEIAL arbon Steel 316 SS astelloy- AD SEAT AD SEAT Pressure-ore TM Grafoil 8,000 PSI @ 450 6,000 PSI @ 200 1,500 PSI @ 800 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 M-220T & M-220ST M-222T & M-222ST 3.06 [77.80] 4.44 [112.8] 1/4"NPT 4.44 [112.8] 1/4"NPT VENT 3.06 [77.7] 2.42 [61.44] 5.66 [143.8] MOUNTING OLES MOUNTING OLES Dimensions in [ ] are in Millimeters. 16101 Vallen Drive ouston, Texas 77041 713-466-0056 1-800-231-0233
200 Series M-230 & M-232 3-Valve Manifolds The model M-230 3-Valve Manifold is designed for remote mounting of the transmitter. This design allows the user to mount each unit in convenient and accessible locations. The model M-232 3-Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location. Both manifolds have bonnet labels that designate the isolation and equalizer valves. Standard materials are arbon Steel and 316 SS, with exotic materials available for severe applications. All flanged manifolds are supplied with two Teflon seal rings and four mounting bolts as standard. eatures TM Patented Teflon Pressure-ore Stem Seal Leak-free performance No maintenance requirements 5 year warranty against stem seal leaks Standard arbide Ball Seat Non-rotating ball eliminates seat galling or creasing to create bubble-tight seating All 316 SS Manifolds onform to NAE (M-01-75) as Standard educes lead times and inventory cost Improves inventory safety Seal Below Stem Thread Prevents media contamination of stem threads and lubricant wash-out Positive Back Seat Design Prevents accidental blow-out or stem removal while operating Provides secondary seal in full open position Bracket Mounting oles (Standard) When used with the optional bracket, manifold can mount to a 2 pipe stand or flat surface to facilitate installation and removal of transmitter ISO 9001 ertified Quality System
200 Series 3-Valve Manifolds STYLE ard Seat SEAT STEM SEAL M-230 - M-232 - OPTION S [Std.] arbon Steel [Std.] 316 SS astelloy- S M 6 N AD SEAT arbon Ball [Std.] eramic Ball 316 SS Ball astelloy- Ball K- Ball STEM SEAL [Std.] Teflon Pressure-ore TM T Grafoil Packed G Viton O-ing V Teflon Packed P Low-Temp Pressure-ore TM J NOTE: Optional materials, accessories and documentation available upon request. GA T V VS W XL X OPTION DESIPTION Anti-Tamper Bonnets ydrostatic Testing arbon Steel Manifold Bracket Stainless Steel Manifold Bracket Safety Bonnet Lock Plate lean for Oxygen Service lean for hlorine Service PAT DESIPTION Body Bonnet Stem Seal etainer andle Assembly Plug(s) Mounting Bolts ABON STEEL 316 SS MONEL ASTELLOY- ASTM A108-1215 or ASTM B164-N04400 ASTM B575-N10276 or ASTM A494 W-12MW ASTM A108-1215 ASTM A582-303 ASTM A108 ASTM B165-N04405 ASTM A108 ASTM A182- (18-8) ASTM A449-TYPE1 ASTM A449-TYPE1 ASTM 593 (18-8) ASTM 593 (18-8) MATEIAL arbon Steel 316 SS astelloy- AD SEAT AD SEAT Pressure-ore TM Grafoil 8,000 PSI @ 450 6,000 PSI @ 200 1,500 PSI @ 800 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 M-230T & M-230ST M-232T & M-232ST MOUNTING OLES 2.07 [52.45] 6.25 [158.80] 3.19 [81.0] 4.80 [121.9] 2.12 [53.9] 2.50 [63.50] 1.25 [31.7] MOUNTING OLES 4.25 [107.9] 5.35 [135.8] 2.12 [53.9] 7.42 [188.5] Dimensions in [ ] are in Millimeters. 16101 Vallen Drive ouston, Texas 77041 713-466-0056 1-800-231-0233
200 Series M-250 & M-252 5-Valve Manifolds The model M-250 5-Valve Manifold is designed for remote mounting of the transmitter. This design allows the user to mount each unit in convenient and accessible locations. It also has the benefit of two controlled vents. The model M-252 5-Valve Manifold is designed for direct mounting the manifold and transmitter together in a convenient and accessible location. It also has the added benefit of two controlled vents. Both manifolds have bonnet labels that designate the isolation, vent and equalizer valves. Standard materials are arbon Steel and 316 SS, with exotic materials available for severe applications. All flanged manifolds are supplied with two Teflon seal rings and four mounting bolts as standard. eatures TM Patented Teflon Pressure-ore Stem Seal Leak-free performance No maintenance requirements 5 year warranty against stem seal leaks Standard arbide Ball Seat Non-rotating ball eliminates seat galling or creasing to create bubble-tight seating All 316 SS Manifolds onform to NAE (M-01-75) as Standard educes lead times and inventory cost Improves inventory safety Seal Below Stem Thread Prevents media contamination of stem threads and lubricant wash-out Positive Back Seat Design Prevents accidental blow-out or stem removal while operating Provides secondary seal in full open position Bracket Mounting oles (Standard) When used with the optional bracket, manifold can mount to a 2 pipe stand or flat surface to facilitate installation and removal of transmitter ISO 9001 ertified Quality System
200 Series 5-Valve Manifolds STYLE ard Seat SEAT STEM SEAL M-250 - OPTION S VENT/ TEST VENT/ TEST M-252 - [Std.] arbon Steel [Std.] 316 SS astelloy- S M 6 N AD SEAT arbon Ball [Std.] eramic Ball 316 SS Ball astelloy- Ball K- Ball STEM SEAL [Std.] Teflon Pressure-ore TM T Grafoil Packed G Viton O-ing V Teflon Packed P Low-Temp Pressure-ore TM J NOTE: Optional materials, accessories and documentation available upon request. GA T V VS W XL X OPTION DESIPTION Anti-Tamper Bonnets ydrostatic Testing arbon Steel Manifold Bracket Stainless Steel Manifold Bracket Safety Bonnet Lock Plate lean for Oxygen Service lean for hlorine Service PAT DESIPTION Body Bonnet Stem Seal etainer andle Assembly Plug(s) Mounting Bolts ABON STEEL 316 SS MONEL ASTELLOY- ASTM A108-1215 or ASTM B164-N04400 ASTM B575-N10276 or ASTM A494 W-12MW ASTM A108-1215 ASTM A582-303 ASTM A108 ASTM B165-N04405 ASTM A108 ASTM A182- (18-8) ASTM A449-TYPE1 ASTM A449-TYPE1 ASTM 593 (18-8) ASTM 593 (18-8) MATEIAL arbon Steel 316 SS astelloy- AD SEAT AD SEAT Pressure-ore TM Grafoil 8,000 PSI @ 450 6,000 PSI @ 200 1,500 PSI @ 800 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 6,000 PSI @ 200 8,000 PSI @ 450 1,500 PSI @ 1,000 M-250T & M-250ST M-252T & M-252ST 3.50 [88.82] 2.04 [51.84] 10.18 [258.6] 1/4"NPT VENT 4.80 [121.9] MOUNTING OLES 7.21 [183.1] 3.13 [79.5] Dimensions in [ ] are in Millimeters. 1/4"NPT VENT 1/4"NPT VENT MOUTING OLES 16101 Vallen Drive ouston, Texas 77041 713-466-0056 1-800-231-0233