Stationary power chuck Dividing head / Tailstock 10/2015
Contents: Stationary power chuck type SPA, pneumatic...4 Stationary power chuck type SPA, round, pneumatic...5 Stationary power chuck type SHP, pneumatic...6 Stationary power chuck type SHH, hydraulic...7 Spring power chucks type FSP...8 FN manual dividing head...9 Mounting plate for FN dividing head...10 FN round table...11 FN tailstock...12 Turo tailstock Typ REM...13 Turo tailstock Typ RES...14
Stationary power chuck type SPA, pneumatic The stationary power chuck is ideal for work that does not require any division of the part. The double-action stationary pneumatic chuck can be used for both vertical and horizontal applications. Positive locking by collet chucks ensures that parts are clamped securely without deformation. Use: Vertical and horizontal Operating pressure: 3-6 bar A1 E G B C1 C2 D C C2 A1 A N B1 B2 N Collet type F12 (113E) F27 (147E) F38 (164E) F48 (173E) F66 (185E) A 90 140 170 170 220 A1 35 60 75 75 100 B 81 105 140 140 153 B1 52 60 65 65 83 B2 72 90 120 120 143 C 90 150 185 185 230 C1 0/+0.01 50 80 100 100 120 C2 25 50 50 50 80 D 50 80 90 90 120 E M 8 M10 M 12 M 12 M 12 G G 1/8 G 1/4 G 1/4 G 1/4 G 1/4 N H7 12 20 20 20 20 Clamping force at 6 bar 4.3 kn 16 kn 18 kn 18 kn 32 kn Order No. 113-112 113-127 113-138 113-148 113-166 4 technical subject to change
Stationary power chuck type SPA, round, pneumatic The stationary power chuck is ideal for work that does not require any division of the part. The double-action stationary pneumatic chuck is designed for vertical applications only. Positive locking by collet chucks ensures that parts are clamped securely without deformation. Use: Vertical Operating pressure: 3-6 bar B B1 4x90 2x G A Nute C F F Collet type F12 (113E) F27 (147E) F38 (164E) F48 (173E) F66 (185E) A 110 165 190 190 240 B 88 110 140 140 150 B1 33 48 70 70 80 C 50 80 90 90 120 E M 8 M 10 M 12 M 12 M 12 F 90 144 168 168 216 G G 1/8 G 1/4 G 1/4 G 1/4 G 1/4 Slot H7 20 20 20 20 20 Clamping force at 6 bar 4.3 kn 16 kn 18 kn 18 kn 32 kn Order No. 113-012 113-027 113-038 113-048 113-066 technical subject to change 5
Stationary power chuck type SHP, pneumatic Stationary pneumatic clamping chuck for System Hainbuch size 42 and 65 clamping heads. The air can be optionally supplied through lateral union pieces or O-rings in the bottom part. The chuck is protected by internal clamping springs that assist the clamping force and ensure that the clamping force is retained in the event of a loss of air. Body made of aluminium, wearing parts made of hardened and ground steel. Chuck heads Gr. 42 Gr. 65 Centering Z170 / Z220 Z170 / Z250 A 227 255 A1 198 218 B 170 200 B1 6 x M6 6 x M6 C 115 140 C1 100 120 E 43 67 F 95 100 P H7 170 170 P1 h7 220 250 R 205 230 S 8 x M10 8 x M10 T 100 112.5 Max. clamping pressure bar 7 7 Maximum axial tension kn 50 65 Order No. 77740242 77740265 6 technical subject to change
Stationary power chuck type SHH, hydraulic Hydraulic stationary clamping chuck for System Hainbuch size 42 and 65 clamping heads. The air can be optionally supplied through lateral union pieces or O-rings in the bottom part. The chuck is protected by internal clamping springs that assist the clamping force and ensure that the clamping force is retained in the event of a loss of pressure. Body made of aluminium, wearing parts made of hardened and ground steel. Chuck heads Gr. 42 Gr. 65 Centering Z115 / Z170 Z140 / Z200 A 170 200 A1 149 174 B 6 x M6 6 x M6 C 115 140 C1 100 120 E 43 67 F 95 100 P H7 115 140 P1 h7 170 200 R 150 180 S 4 x M10 4 x M10 T 72.5 85 Max. clamping pressure bar 26 30 Maximum axial tension kn 80 100 Order No. 77740142 77740165 technical subject to change 7
Spring power chucks type FSP - For vertical and horizontal applications - Spring-action clamping, hydraulic opening - Also available as modular system for grid 30/40/50 for all grid plate systems ø D ø E G 12 øe B H ø A F J K J L K Type FSP-F12 FSP-F16 FSP-F28 FSP-F35 FSP-F48 A 7 50 80 100 130 B 43 50 71 83 85 C 65 65 103 115 120 D 37 48 75 86 100 E 0.5-9.0 0.5-13.0 1.0-23.0 2.0-30.0 3.0-42.0 F - - 20 30 35 G M8 x 1 M8 x 1 M10 x 1 M10 x 1 M10 x 1 H - - 60 80 100 Weight 1.7 6.5 16.5 20.0 - Order No. 1203 1603 2803 3503 4803 Cylinder mount and thread can be supplied for any grid system 8 technical subject to change
FN manual dividing head Technical features: With manual quick-set, for vertical and horizontal applications - Standard divisions: 2/3/4/6/8/12/24 - Subdivisions set rapidly and simply by adjusting the limit stop - Cast iron body, dividing plates made of hardened and ground steel - Division tolerance: 2 - Impact tolerance of conical seat: 0.02 mm - Parallelism to base plate: 0.02 mm - Rectangularity and axis parallelism to mounting surface 0.02 mm - Precision of the scroll chuck: 0.03 0.06 mm Standard accessories: - Sliding blocks - Fixing screws Morsekegel Morse Taper Cône morse Size Height of centers 100 125 160 200 250 A 100 125 160 200 250 B 256 301 382 469 555 C 167.5 210 265 330 411 D 125 160 200 250 315 d 38.5 42 55 76 103 Morse taper 3 3 4 4 5 E H7 18 18 18 18 18 F 130 140 160 180 200 G 14 14 18 18 18 H 109.5 108.5 123.5 139.5 157.5 K 185 215 260 300 360 K 1 65 70 80 90 100 K 2 107.5 122.5 150 170 200 L 215 245 300 340 400 Order No. with cast iron chuck 180-300 180-400 180-500 180-600 180-700 Order No. without chuck 180-301 180-401 180-501 180-601 180-701 Other dividing plates on request technical subject to change 9
a Mounting plate for FN dividing head G D h C H B A F E Size A 160 200 250 315 B 125 160 200 260 C 4 5 5 5 H 30 40 50 50 E 12 14 18 18 F 15 15 22 26 G M10 M10 M12 M16 H 30 35 50 50 J 140 176 224 286 Weight kg 3.9 5.5 12.1 19.5 Order No. 180-450 180-550 180-650 180-750 10 technical subject to change
FN round table Technical features: Universal round table with hand wheel for direct and indirect division. Suitable for vertical and horizontal applications. - Hardened and ground worm and Morse cone - Radial run-out of Morse taper 0.01 mm - Parallelism of table surface 0.02 mm - Worm gearing can be disconnected - Direct divisions 2/3/4/6/8/12/24, with T-slots - Scale 360 on table circumference with adjustable zero setting H F G A D MK L B E C Dimension / D 160 200 250 320 400 A 225 270 318 374 465 B 200 240 285 348 430 C 90 95 115 115 125 E 14 14 18 18 18 F 125 150 175 200 250 G 4 x 10 4 x 10 4 x 12 4 x 12 6 x 14 H 96 98 115 120 135 L 127 147 175 207 248 Morse taper 3 3 3 3 4 Weight kg 20 25 55 80 122 Order No. 182-500 182-600 182-700 182-800 182-900 Adapter plate steel for round table ø 160 200 250 320 400 for 3-/4-Jaws Chuck 125 160 200 250 315 Order No. 182-501 182-601 182-701 182-801 182-901 technical subject to change 11
FN tailstock Cast iron housing Clamping on the left, inc. 60º half peak L F MK H K C E A B Size Height of centers 100 125 160 200 250 A 195 195 250 275 280 B 80 90 115 130 150 C 140 178 213 253 303 H 100 125 160 200 250 E 14 14 18 18 18 F 33-63 39-69 48-85 59.5-99.5 59.5-99.5 Morse taper 2 2 3 4 4 Weight kg 6.1 7.4 12.7 17.9 23.1 Order No. 180-320 180-420 180-520 180-620 180-720 12 technical subject to change
Turo tailstock Typ REM Steel housing Tailstock manual with hand wheel Clamping on the left as standard, optionally on the right. MK 2 34 108 60 25 0.04/100 B 0.01/100 B H Sph 0.01/100 A E F 13 A 165 20H6 B 100 Sph 80 100 110 120 125 140 150 160 H 98 118 128 138 143 158 168 178 E - - 22 22 22 22 22 22 F 18 18 28 38 43 58 68 78 Stroke 30 30 30 30 30 30 30 30 Order No. 80.070 100.070 110.070 120.070 125.070 140.070 150.070 160.070 Other height of center or pneumatic version on request technical subject to change 13
Turo tailstock Typ RES Steel housing Tailstock manual with hand wheel Pressure applied by spring force Clamping on the left as standard, optionally on the right. für Auswerfer 60 MK-2 ca. 57 115 25 0.04/100 B 0.01/100 B E H SpH 0.01/100 A F A 108 165 13 B 20H6 100 Sph 100 110 120 125 140 150 160 H 118 128 138 143 158 168 178 E 12 12 22 22 22 22 22 F 18 28 38 43 58 68 78 Stroke ca. 15 ca. 20 ca. 20 ca. 20 ca. 20 ca. 20 ca. 20 Order No. 100.074 110.074 120.074 125.074 140.074 150.074 160.074 Other height of center or pneumatic version on request 14 technical subject to change
FN NIEDERHAUSER AG Allmend 39 CH - 6204 Sempach phone 0041 / (0)41 340 50 75 / fax 0041 / (0)41 340 50 74 info@niederhauser.ch / www.niederhauser.ch