Kitchen and Bath Organization

Ironing Boards...873 874 Pull-Out Table Systems...875 876 Foldaway Systems...877 878 Corner Systems...879 896 Base Cabinet Pull-Out Systems...897 905 Basket Storage Systems...906 910 Pantry Pull-Out Systems...911 917 Waste and Recycling Systems...918 925 Pull-Out Towel Racks...926 927 Drawer Inserts...928 938 871

Cabinet Accessories...939 947 Pole System...948 Kitchen Railing and Backsplash Sytems...949 956 Countertop and Suspension Systems...957 959 Ventilation Grills...960 961 Lattice...962 872

Ironing Boards Ironfix Built-in Ironing Board Space-saving, cabinet drawer installation Continuous width adjustment for inside clear widths of 362-500 mm (14 1 / 4"-19 11 / 16") Inside clear depth 500 mm (19 11 / 16") Integrated spring mechanism Drawer front folds down to allow for trousers, shirts, etc Support extends automatically as ironing board is pulled out Inside clear width 362-500 mm (14 1 /4"-19 11 /16") 950 (37 3 /8") Cabinet inside clear depth 500 mm (19 11 /16") 300 (11 3/4") D E Use the below dimensions to match ironing surface to countertop height. 32 (1 1 /4") D (mm) 20 ( 7 /8") 30 (1 1 /8") 40 (1 1 /2") 50 (2") E (mm) 86 (3 3 /8") 76 (3") 66 (2 1 /2") 66 (2 1 /2") 873 max. 19 (3/4") 37 416 (1 7 /16") (16 3 /8"), epoxy-coated; heat-resistant striped fabric-covered ironing surface white RAL 9016 568.60.710 (includes installation hardware, mounting instructions 1 collapsible ironing board support system with folding ironing board and runners.) Replacement heat-resistant cover for ironing board with elastic band. Material: natural cotton, foam-backed white/grey striped 568.60.907 Sleeve board, optional Retrofits easily to Ironfix built-in ironing board. white RAL 9016 568.61.700 Replacement heat-resistant cover for sleeve board with elastic band. Material: natural cotton, foam-backed white/grey striped 568.60.916

Ironing Board for Wall Mounting Ironfix Wall-mounted Turning mechanism; swivel range 180º Locks in left, right, or inclined position 326 (12 7/8") 950 (37 3/8") 525 (20 5/8") 185 (7 1/4") 300 (11 7/8") 985 (38 7/8") 110 (4 3/4") 120 (4 3/4") Ironfix wall-mounted ironing board, epoxy-coated Cover: natural white cotton with grey stripes, foam-backed white RAL 9016 568.66.700 (Includes installation hardware) 365 (14 3/8") 595 (23 7/16") 140 (5 1/2") Wall Cover, optional with slightly structural surface Material: polystyrene white RAL 9016 568.66.790 Replacement heat-resistant cover, with elastic band Material: natural cotton, foam-backed white/grey stripes 568.60.907 874

Pull-out Table Systems Self-supporting table A drawer front panel can be screw-mounted directly onto the table front panel The system can be subsequently installed in place of a drawer or between two cabinets Fitting is not visible when installed Rapid Pull-Out Table, cantilever 600 mm (23 5 / 8") wide cabinets Load capacity: 100 kg (220 lbs.) (evenly distributed) 561 (22") 800 (31 1 /2") 120 (4 3 /4") 490 (19 1 /4") Table width 521 (20 1 /2") Material: wood Table top: melamine plastic coated Telescopic guides: beech white/grey dotted 505.58.703 maple 505.58.103 (includes housing, guides and front panel) 875

Pull-out Table Systems Top Flex Pull-Out Table System Extension fitting can support any width surface up to 900 mm (35 / 2") Maximum load 15 kg (33 lbs.) As the pull-out table is extended, the front panel drops down automatically until the top is flush with the table Extended length: 810 mm (32") Cabinet width: 450 900 mm (17 3 / 4" 35 1 / 2") Interior cabinet opening height: 120 mm (4 3 / 4") Minimum cabinet depth: 510 mm (20"), plated 505.70.200 Packing: 1 set (table top and front panel are customer supplied) 810 (32") 120 (4 3/4") stretcher and Worktop thickness 16 mm (5/8 ) Customer supplied 450-900 (17 3/4"-35 1/2") 876

Pull-out Table Systems The inner tabletop sections fold downward on tracks when the table is closed, occupying a minimum of space against the rear panel of the cabinet Dimensions in parentheses are for 600 mm (24") installed depth Maximum width of top is 600 mm Unit must be pulled out completely during operation Text Change Bio-Fix products from Häfele. 320 (12 5 /8") (420) (16 1 /2") 320 (12 5 /8") (420) (16 1 /2") 620 (24 3/8") (820) (32 1 /4") A 130 (5 1 /8") 420 (16 1 /2") (520) (20 1 /2") 55 (2 1 /8") Tabletop width A approximately 2 mm less than inside cabinet width. Pull-out Table System, cantilever For 2-part tabletop, max. thicknesses 18 mm ( 3 4 ) Weight capacity: 30 kg. (66 lbs) evenly distributed Cabinet depth galvanized 500 mm (20") 505.70.502 600 mm (24") 505.70.600 Packing: 1 set (includes mounting instructions) Pull-out table systems, with fixed front panel 877 The panel either projects above the level of the table. Or the panel is mounted flush with the tabletop, in which case a shallow trim is required above the pull-out front.

Foldaway Systems Latch locks in down as well as up position Prevents shelf from banging against the lower cabinet door from the inside when closed Cabinet widths of 300 mm (11 7 / 8") to 600 mm (23 5 / 8") and shelf depth of 420 mm (16 1 / 2") Load bearing capacity: 12 kg (26 lbs) Kitchen and Bath Organization Bio-Fix products from Häfele. Foldaway Fitting, with locking mechanism 266 (10 1/2") 212 (8 3/8") 600 (23 5/8") max. inside dim. minus 70 mm (2 3/4"), epoxy-coated Minimum Inside Cabinet For Storage Of Height-including swing arc Depth Max. Height Up To Max. Depth Up To white 470 mm (18 1 / 2") 465 mm (17 1 / 4") 305 mm (12") 292 mm (11 1 / 2") 504.24.710 202 mm (8") 406 mm (16") 570 mm (22 1 / 2") 565 mm (19 1 / 4") 394 mm (15 1 / 2") 336 mm (13 1 / 4") 504.24.701 342 mm (13 1 / 2") 406 mm (16") Packing: 1 set (includes 2 mechanisms (left and right), 2 locking devices, 2 tension springs, 4 plastic distance washers, 4 plastic appliance spacers, and mounting instructions) Dimensions for storage of items: PLAN VIEWS 504.24.710 Max. Depth 292 (11 1/2") 504.24.701 Max. Depth 336 (13 1/4") 202 (8") Max. Height 406 (16") Max. Depth 450 (17 3/4") min. 37 (1 2/3") 305 (12") Max. Height Minimum inside dimensions including swing arc: 470 (18 1/2") 342 (13 1/2") Max. Height 570 (22 1/2") 406 (16") Max. Depth 500 (19 1/2") min. 394 (15 1/2") Max. Height 878

Pull Down Shelf Mechanism Suitable for kitchens, offices and hospitals in upper cabinets Fits from 562 mm (22 1/8") to 862 mm (33 15/16") wide cabinets Pull down unit pivots down to permit easier access to upper cabinet Stainless steel side walls easily attach wood shelves (customer supplied) Gas pistons allow for smooth return of mechanism into cabinet Blocking recommended for face-frame applications Load capacity: 12 kg. (26 lb.) Min. 16 (5/8") Cabinet width 285 (11 1/4") Min. 660 (26") Max. 475 (19") Min. 120 (4 3/4") 45 (1 3/4") 283 (11 5/8") 360 (14 5/8") 580 (22 3/4") Material: stainless steel matt 504.58.200 Packing: 1 set (includes arms, pistons, 2 sides, 2 bars and mounting instructions) Fence, for wood shelves Press-fits in 5 mm diameter drilled holes Height: 39 mm (1 1 / 2") Length # Press fit plugs chrome-plated 879 Text Change 248 (9 3 4") 2 547.51.218 298 (11 3 4") 2 547.51.227 348 (13 3 4") 2 547.51.236 398 (15 3 4") 2 547.51.245 448 (17 5 8") 3 547.51.254 548 (21 1 2") 3 547.51.263 [736 (29 )] 3 547.51.204 Packing: 2 pcs.

Corner Access Solutions Magic Corner II With Optional Soft & Silent Feature Soft and Silent Feature slows the pull-out just before final closure, creating automatic and silent closing Shown: Right hand mounting 960-1168 (37 3/4-46 ) 390 (15 3/8 ) cabinet depth 498 (19 5/8 ) 400 (15 3/4 ) 52 (2 1/16 ) Base corner unit for use with hinged door Requires minimum door opening of 494 mm (19 1/2 ) and additional clearance for door hinge Available for left and/or right hand mounting Front baskets pull out and swivel to a 90 open position while back baskets are simultaneously moved to the cabinet opening Back baskets slide forward individually providing total access, epoxy-coated silver Right hand 548.10.230 Left hand 548.10.231 Packing: 1 set (mounting instructions included) (mounting hardware not included) Baskets and Soft & Silent feature ordered separately. (See below) max 90 546 (21 1/2 ) 390 (15 3/8 ) 470 (18 1/2 ) 102 (4 ) 1 390 (15 3/8 ) 525 (20 5/8 ) 390 (15 3/8 ) inside height 535 (21 1/16 ) Arena Plus Tray, with non-slip surface Basket dimensions: Front: 390 x 470 x 88 mm (15 3/8 x 18 1/2 x 3 1/2 ) Back: 390 x 400 x 85 mm (15 3/8 x 15 3/4 x 3 3/8 ) Material: Shelf: melamine Surround: steel Non Slip white/chrome-plated 548.11.263 maple/chrome-plated 548.11.265 Packing: 1 set (2 front and 2 back baskets) Soft & Silent Feature For base corner unit system Material: plastic grey 546.17.290 Storage Baskets for base corner unit system Basket dimensions: Front: 390 x 470 x 88 mm (15 3/8 x 18 1/2 x 3 1/2 ) Back: 390 x 400 x 85 mm (15 3/8 x 15 3/4 x 3 3/8 ) wire chrome-plated 548.11.260 Packing: 1 set (2 front and 2 back baskets) 880

Corner Access Solutions Magic Corner I With Optional Soft & Silent Feature Available for left or right hand mounting The cabinet door mounts to the pull-out frame When the door is opened, it is pulled outward, then swivelled to the side along with the front baskets while the back baskets are simultaneously moved into the cabinet opening Optional Soft & Silent Feature slows the pull-out just before final closure, creating automatic and silent closing Left swivelled Right swivelled 960-1168 mm (37 3/4" - 46") 390 x 470 mm (15 3/8 x 18 1/2") 415 mm (16 3/8") 525 mm (20 5/8") 474 mm (18 5/8") 390 x 470 mm 340 x 470 mm Approx. 730 mm (28 3/4") 80º Base corner unit system For inside height min. 525 mm (20 5/8"), epoxy-coated Slide: steel Right hand Left hand silver RAL 9006 546.17.917 546.17.908 Packing: 1 set (mounting template included) (mounting hardware not included) 881 minimum 500 mm (19 5/8") 300 mm (11 7/8") minimum 405 (16") Rear track frame is adjustable for cabinet width and is secured to side panels. 450-600 mm (17 7/8"-23 5/8") Soft & Silent Feature Material: plastic grey 546.17.290 Packing: 1pc. Arena Plus Tray, with non-slip surface Basket dimensions: Width: 470 mm (18 1 / 2") Non Slip Height: 88 mm (3 1 / 2") Material: Shelf: melamine Surround: steel Depth white/chrome-plated 305 (12") 545.60.278 white/chrome-plated 390 (15 3 / 8 ") 546.17.268 maple/chrome-plated 305 (12") 545.60.178 maple/chrome-plated 390 (15 3 / 8 ") 545.60.179 Storage Baskets Basket dimensions: Width: 470 mm (18 1 / 2") Height: 85 mm (3 3 / 8") wire Depth chrome-plated 340 (13 3 / 8 ") 546.17.257 390 (15 3 / 8 ") 546.17.267 Set of 4 Baskets 4 baskets with two sizes per pair: Text 2 = 305 x 470 x 85 (12 x 18 1/2 x 3 3/8 ) Change 2 = 390 x 470 x 85 (15 13/8 x 18 1/2 x 3 3/8 ) wire chrome-plated 546.17.266 Packing: 1 set Material: Shelf: melamine Surround: steel grey/chrome-plated [546.17.286] Packing: 1 set New Item 50º

1/4 Turn Systems For use in corner cabinets To be mounted on a central upright 680 (26 7/8 ) min. 389 (15 3/8") 350 (13 7/8") 79 (3 1/8") from 400 (15 3/4 ) Half moon 1/4 revolving shelf Screw-mounted to central upright with a minimum cabinet height of 565 mm (22 1 / 4"). Material: plastic Post: steel white/chrome-plated 542.09.710 Packing: 1 set (includes 2 shelves, post, 1 upper and 1 lower bearing, 1 follower and 1 rubber ring) Installation using a center upright minimum 32 mm x 32 mm (1 1/4" x 1 1/4" square) 47 (1 7/8") To adjust the height of the upper tray, press it firmly on the rubber ring which is positioned at the chosen height on the post. The follower (which is attached to the backside of cabinet door), is guided under the tray and pivots automatically to the exterior when the door is opening. Rubber ring for the upper tray positioning Post Upper bearing with cover 79 (3 1/8") 47 (1 7/8") 32 (1 1/4") Lower bearing Central upright (Customer supplied) wood. 882

1/4 Turn Systems Installation Using a 50 mm centre upright. 27 27 27 50 77 Drill hole 5 mm dia., 10 mm deep 1/4 Turn post, 495 mm (19 1 / 2") high with upper bearing to be screw-mounted to a centre upright, and lower bearing to be screw-mounted to the cabinet bottom. Material: Post: steel Bearings: plastic, white chrome-plated 541.19.292 (Includes central post, shelf support ring, and bearings) 27 50 77 750/850 (29 1 /2"/33 1 /2") ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. Shelf follower for ARENA shelf 541.34.210/220 used for cabinets with doors. Allows the shelf to revolve automatically as the door opens. chrome-plated 541.03.286 Shelf Protector for ARENA shelf 541.34.210/220. Clips onto metal profile. Material: plastic aluminum coloured 541.03.791 883 65 (2 5/8") 27 (1 1/8") 27 (1 1 /8") 32 (1 1 /4") min. 475/525 (18 3 /4"/20 5 /8") Non Slip Half moon revolving shelf, ARENA Plus Material: Shelf: melamine Surround: steel Cabinet door width mm (inch) Dimensions : white/ chrome-plated 440 (17 1 / 4") 750 x 420 x 90 mm 541.34.210 (29 1 / 2" x 16 1 / 2" x 3 1 / 8") 490 (19 1 / 4") 850 x 470 x 90 mm 541.34.220 (33 1 / 2" x 18 1 / 2" x 3 1 / 8") : maple/ chrome-plated 440 (17 1 / 4") 750 x 420 x 90 mm 541.34.110 (29 1 / 2" x 16 1 / 2" x 3 1 / 8") 490 (19 1 / 4") 850 x 470 x 90 mm 541.34.120 (33 1 / 2" x 18 1 / 2" x 3 1 / 8")

1/4 Turn Systems Ordered separately as needed: from 440/490 (17 1 /4" / 19 1 /4") 750/850 (29 1 /2" / 33 1 /2) 77 min. 460/510 (18 1 /2" / 20") Half moon revolving shelf with spindle bearing and clamping sleeve. Bearing: plastic, white Cabinet door width Dimensions chrome-plated mm (inch ) 440 (17 1 / 4") 750 x 420 x 80 mm 541.19.229 (29 1 / 2" x 16 1 / 2" x 3 1 / 8") 490 (19 1 / 4") 850 x 475 x 80 mm 541.19.247 (33 1 / 2" x 18 3 / 4" x 3 1 / 8") (includes support ring and mounting pin) Shelf follower for half moon revolving shelf 541.19.229/247 used for cabinets with doors. Allows the shelf to revolve automatically as the door opens. Material: plastic aluminum coloured 541.19.283 75 425 (16 3 /4") 782 (30 7 /8") 73,5 min. 485 (19 1 /8") Half moon wire fence 1/4 turn For wood shelves (customer supplied) Shelf revolves in bearing screw-mounted to centre upright., chrome-plated Bearing: plastic For cabinet door Dimensions width mm (inch) 425 (16 3 / 4") 779 x 425 x 105 541.03.230 (30 5 / 8" x 16 3 / 4" x 4 1 / 8") Shelf follower For fence 541.03.230, used for base units with doors. Allows the shelf to revolve automatically as the door opens. chrome-plated Roller: plastic white 541.03.285 Packing: 10 pcs. 884

Revolving Corner Unit Systems For attachment of wood (customer supplied) half moon revolving shelves to a central upright at any height. = = (19 5 /8") 500 72 = approx. 570 (22 3 /8") = The pivot fitting, designed for left or right hand mounting, is screwed to the center upright at desired height. Runner stop The runner stop can be installed on either side. Revolving/extended system, epoxy-coated white 541.63.709 (includes revolving element with shelf support arms, extension runners, and pivot fitting) 885

1/4 Turn Wire Shelf Corner Unit Systems Kitchen and Bath Organization 1/4 turn/extending wire shelf with fence, epoxy-coated For cabinet door width from Dimensions white mm ( inch) mm 425 (16 3/4 ) 770 x 400 541.26.724 490 (19 5/16 ) 890 x 460 541.26.742 (includes pivot fitting, follower roller and ball-bearing slide) The pivot fitting, which is designed for left or right hand mounting, is screwed to the centre upright at any desired height. Installed dimensions for minimum door width: 770 (30 5 /16") min. 485 (19 1 /8") 890 (35 1 /16") min. 540 (21 1 /4") from 425 (16 3 /4") 71 from 490 (19 5 /16") 71 610 (24") 770 (30 5 /16") 4" 9" 5 7/8" Installation using a 60 mm centre upright (customer supplied). 2 4" door follower roller Shelves are delivered with a follower roller, that is screwed to the inside of the door, allowing the shelf to revolve as the door opens, from where it can be extended forward. The runner shelf is equipped with a screw mounted runner stop, that is to be installed on the outside of the runner shelf to stop the Runner stop shelf on the rotary point when it s pushed back. 886

Corner Pull-out for Blind Base Cabinets LeMans Kitchen and Bath Organization Full swing brings entire cabinet contents into the open Smooth combination of turning and swinging The door is opened. The top or bottom tray swings out. Illustration shows shelf swinging to the right. Tray moves completely out of the cabinet. Corner Pull-out Shelf, Arena Plus, with non-slip surface for cabinet from 900 mm (35 7/16 ) to 1,000 mm (39 3/8 ) Material: Shelf: melamine Surround: steel Cabinet Door Opening mm inch swing white/ maple/ grey/ chrome-plated chrome-plated chrome-plated 411-418 (16 3/16-16 7/16 ) right 541.33.245 541.33.345 541.33.545 left 541.33.246 541.33.346 541.33.546 461-468 (18 3/16-18 7/16 ) right 541.33.250 541.33.350 541.33.550 left 541.33.251 541.33.351 541.33.551 561-568 (22 1/8-22 3/8 ) right 541.33.260 541.33.360 541.33.560 left 541.33.261 541.33.361 541.33.561 Packing: 1 set (2 trays) (order post separately) New Item Post, height adjustable with upper bearing, screw-mounted For Inside Height mm inch chrome-plated 600-750 (23 5/8-29 1/2 ) 541.33.200 720-900 (28 3/8-35 7/16 ) 541.33.201 mm Door Opening 887 Image Change G B J A K H F C E D (inches) 450 (17 3/4 ) 500 (19 3/4 ) 600 (23 5/8 ) A 900 (35 7/16 ) 1000 (39 3/8 ) 1000 (39 3/8 ) B 500 (19 3/4 ) 500 (19 3/4 ) 500 (19 3/4 ) C D 411-418 461-468 561-568 (16 3/16-16 7/16 ) (18 3/16-18 7/16 ) (22 1/8-22 3/8 ) 16-19 16-19 16-19 (5/8-3/4 ) (5/8-3/4 ) (5/8-3/4 ) E 45 (1 3/4 ) 45 (1 3/4 ) 45 (1 3/4 ) F 450 (17 3/4 ) 500 (19 3/4 ) 600 (23 5/8 ) G 65 (2 9/16 ) 65 (2 9/16 ) 65 (2 9/16 ) H 600-900 600-900 600-900 (23 5/8-35 7/16 ) (23 5/8-35 7/16 ) (23 5/8-35 7/16 ) J 25 (1 ) 25 (1 ) 25 (1 ) K 70 (2 3/4 ) 70 (2 3/4 ) 70 (2 3/4 )

Corner Systems LeMans - Kesseböhmer Full swing brings entire cabinet contents into the open Smooth combination of turning and swinging Maximum load per shelf: 65 lbs. Height of door hinge must be considered For inset doors, door opening must be dimension C - 1" for door clearance Maple Arena Plus shelves with Non-Slip surface Easily retrofitted into blind corners Shelves are height adjustable Maple/Champagne finish exclusive to Häfele America Co. Text Change Swings Right A Swings Left A B B C C Non Slip Corner Pull-out Shelf, Arena Plus Minimum inside cabinet height: 711 mm (28 ) Minimum door opening: 90º Material: Shelf: melamine Surround: steel Framed Cabinets Tray A B C swing maple/champagne 15 33 1 /2 21 15-16 right 541.33.445 851 533 381-406 left 541.33.446 18 34 1 /2 21 18-19 right 541.33.450 876 533 457-483 left 541.33.451 21 39 1 /2 21 21-22 right 541.33.460 1003 533 533-559 left 541.33.461 Packing: 1 set (2 trays, 2 posts) Lid rack, for Arena shelf New 450 x 150 x 40 Item (17 3 4 x 5 15 16" x 1 9 16") chrome-plated 541.46.270 Text Change Frameless Cabinets Tray A B C swing maple/champagne 15 33 1 /2 21 16-17 right 541.33.445 851 533 406-432 left 541.33.446 18 34 1 /2 21 19-20 right 541.33.450 876 533 483-508 left 541.33.451 21 39 1 /2 21 22-23 right 541.33.460 1003 533 559-584 left 541.33.461 Packing: 1 set (2 trays, 2 posts) 888

Revolving Corner Systems Pie Cut Shelf Set For use in corner cabinets Easily installed, adjustable post Pre-drilled holes for easy door attachment A = thickness of tray r C C = pie of tray A B 1 7 /8" B = mounting surface to center of pole Adjustable post fits 23 1 /4" - 33" high cabinets. Material: Shelves: high impact polystyrene Post: steel Bearings: nylon Bottom support: steel, galvanized Size r=radius A B C white/chrome-plated 24" 12" 1 7 8" 1 1 2" 10 1 2" 542.10.721 28" 14" 1 7 8" 3 1 2" 10 1 2" 542.10.730 Packing: 1 set (includes 2 trays and hardware) Kidney Shelf Set For use in corner cabinets with hinged door Trays rotate independently Lock-in position Easily installed, adjustable post 889 A = thickness of tray r C C = pie of tray A B 1 7 /8" B = mounting surface to center of pole Adjustable post fits 23 1 /4" 33" high cabinets. Material: Shelves: high impact polystyrene32" diamet Post: steel Bearings: nylon Size r=radius A B C white/chrome-plated 24" 12" 1 7 8" 2" 10" 542.11.728 28" 14" 1 7 8" 4" 10" 542.11.737 32" 16" 2 1 8" 4 1 8" 11 7 8" 542.11.740 Packing: 1 set (includes 2 trays and hardware)

Revolving Corner Unit Systems For self made corner shelves Use with optional center post 820 (32 1 /4") 38 (1 1 /2") 82 (3 1 /8") 82 (3 1 /8") Cutout and hole for wood shelf Wire Surround Fence For screw mounting to three-quarter round, wood shelf (customer-supplied) For 900 x 900 mm (36 x 36") corner units Diameter: 810 mm (31 7 / 8") Height: 62 mm (2 1 / 2") chrome-plated 541.02.233 Shelf support for mounting to post 541.17.234 Supports three-quarter round, revolving wood shelf, epoxy-coated Bearing: plastic white 541.02.720 (includes bearing and retaining pin) 11 (7/16") Wire fences are secured to wood shelves with raised head screws. 890

Revolving Corner Unit Systems Three-quarter Round Upper bearings Height adjustment bearing Post with lower mounting plate Upper drilling diagram 10 mm deep Ø5 Centre Post vertically adjustable 725 (28 9 / 16") to 765 mm (30 1 / 8") Accomodates 3 shelves Material: Post: steel Height-adjustable bearing: steel, galvanized Bearings: plastic chrome-plated/white 541.17.234 (includes upper, lower, and vertical adjustment bearings) 891

Revolving Corner Unit Systems Three-quarter Round Three-quarter round, revolving wire shelf with wire surround Height: 80 mm (3 1 /8") For corner base units Diameter chrome-plated 800 x 800 (31 1 / 2" x 31 1 / 2") Ø 700 (27 9 / 16") 541.18.222 900 x 900 (35 7 / 16" x 35 7 / 16") Ø 820 (32 5 / 16") 541.18.231 (includes pin and self-centering cam) Three-quarter round ARENA Plus, with non-slip surface Height: 80 mm (3 1 /8") Material: Shelf: melamine Surround: steel Non Slip for corner base units Diameter white/chrome-plated 800 x 800 (31 1 / 2" x 31 1 / 2") Ø 700 (27 9 / 16") 542.31.280 white/chrome-plated 900 x 900 (35 7 / 16" x 35 7 / 16") Ø 820 (32 5 / 16") 542.31.230 maple/chrome-plated 800 x 800 (31 1 / 2" x 31 1 / 2") Ø 700 (27 9 / 16") 542.31.182 maple/chrome-plated 900 x 900 (35 7 / 16" x 35 7 / 16") Ø 820 (32 5 / 16") 542.31.192 (includes pin and self-centreing cam) ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding Installed dimensions for corner base units 800 x 800 mm (31 1 /2" x 31 1 /2") Installed dimensions for corner base units 900 x 900 mm (35 7 /16 x 35 7 /16") 800 (31 1 /2") New Item Ø 700 (27 9 /16") min. 480 (19") 120 (4 3 /4") Lid rack, for Arena shelf 450 x 150 x 40 (17 3 4 x 5 15 16" x 1 9 16"). chrome-plated 541.46.270 900 (35 7 /16") New Item Ø 820 (32 5 /16") 90 (3 1 /2") 892 min. 510 (20 1 /8") Divider, for Arena shelf chrome-plated 320 x 320 x 150 541.46.268 (12 5 8" x 12 5 8" x 5 15 16") 370 x 370 x 150 541.46.269 (14 9 16" x 14 9 16" x 5 15 16")

Revolving Corner Systems Full Round For corner cabinet installations Durable nylon bearings Easy to install with adjustable post Full Round Shelf Sets Material: Shelf: high impact polystyrene Pedestal: steel Bearings: nylon Adjustable post fits 23 1 / 4" 33" for two tray sets. Adjustable post fits 27" 45" for three tray sets. Size Trays Post r=radius white/chrome-plated 18" 2 23 1 / 4-33" 9" 542.12.716 18" 3 27-45" 9" 542.12.743 20" 2 23 1 / 4-33" 10" 542.19.720 24" 2 23 1 / 4-33" 12" 542.12.725 28" 2 23 1 / 4-33" 14" 542.12.734 32" 2 23 1 / 4-33" 16" 542.12.700 Packing: 1 set (includes 2 or 3 trays and hardware) A Note: 32" diameter trays rotate independently - all other size trays rotate together. r Upper post bearing Adjusting element Shelf bearing Locking-pin Post with lower mounting plate 893

Revolving Corner Unit Systems Full Round Corner floor unit revolving systems with circular revolving shelves For cabinets with front-mounted diagonal doors Fixed center post Upper spindle bearing Upper height adjustment bearing Post Center post, vertically adjustable from 725 mm (28 1 / 2") to 765 mm (30 1 / 8") Accommodates 3 shelves Material: Post: steel Height adjustment bearing: steel Upper bearing: plastic chrome-plated/white 541.17.234 (includes upper, lower and height adjustment bearings) 460 (18 1/8 ) Post with lower mounting plate 900 (35 1/2 ) min. 500 (19 3/4 ) ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround The ARENA Plus non-slip surface prevents stored items from sliding New Item Lid rack, for Arena shelf 450 x 150 x 40 (17 3 4 x 5 15 16" x 1 9 16"). chrome-plated 541.46.270 Ø750 (29 1/2 ) Circular revolving shelf with wire fence For cabinets 900 x 900 mm Dimensions: Ø 750 mm (29 1 /2"), 80 mm (3 1 /8") high chrome-plated 541.12.239 (includes support and positioning device) Round Revolving Shelf, ARENA Plus Non For cabinets 900 x 900 mm Dimensions: Ø 750 mm (29 1 /2"), 80 mm (3 1 /8") high Material: Shelf: melamine Surround: steel white/chrome-plated 542.32.292 maple/chrome-plated 542.32.192 (includes support) New Item Slip Divider, for Arena shelf chrome-plated 320 x 320 x 150 541.46.268 (12 5 8" x 12 5 8" x 5 15 16") 370 x 370 x 150 541.46.269 (14 9 16" x 14 9 16" x 5 15 16") 894

Revolving Corner Systems Twister No center post, axle is offset to side allowing maximum storage Height adjustable axle with adjustable shelves Full Round Shelf Sets ø450 mm (17 3/4 ) Material: Shelf: melamine Surround: steel For inside cabinet height Shelves white/chrome-plated 528-638 mm (20 3/4-25 1/8 ) 2 542.92.201 659-769 mm (25 15/16-30 1/4 ) 2 542.92.202 812-922 mm (32-36 5/16 ) 3 542.92.203 Packing: 1 set (includes axle, bearing and 2 round shelves) D shelf sets ø500 mm (19 3/4 ) Material: Shelf: melamine Surround: steel For inside cabinet height Shelves white/chrome-plated 528-638 mm (20 3/4-25 1/8 ) 2 542.92.211 659-769 mm (25 15/16-30 1/4 ) 2 542.92.212 812-922 mm (32-36 5/16 ) 3 542.92.213 Packing: 1 set (includes axle, bearing and 2 D shelves) 600 (23 5/8") 600 (23 5/8") ø450 ø500 600 (23 5/8") R8 min. R 235 308 (12 1/8") 600 (23 5/8") Ø8 min. R 260 295 (11 5/8") 45 45º min. 267 min. 270 600 mm wall corner unit with 600 mm wall corner unit with round shelf 895

Revolving Corner Systems Mondo Mechanism is complete and pre-installed with shelves Curved door pushes in and revolves with the shelves The door closes flush Customized doors can be used (i.e. veneer laminate, etc.) Coordinates with Eclipse on the following page 610 (24") 394 (15 1/2") 914 (36") 914 (36") Mondo revolving corner cabinet with curved shaped door Width across corners: 914 x 914 mm (36 x 36 ) Side height: 774 mm (30 1/2 ) or 786 mm (31 ) Leg leveler height: 100 mm (4 ) Load capacity 20 kg (44 lbs.)/shelf Material: plastic/metal Leg levelers: plastic Side height white 774 mm (30 1/2 ) 542.27.780 (includes cabinet, 2 shelves, 2 door holders, door brush profile and 7 leg levelers) Installation dimensions for curved door 780 (30 11/16") 769 (30 1/4") Curved Door 3.5 (3/16") 487 (19 3/16") Door type 769 mm (30 1/4 ) stainless steel 542.26.734 plastic (customer 769 mm (30 1/4 ) supplied veneer) 542.26.760 Chopping board for Mondo Finishes the corner when the countertop is L-shaped 90º. Material: solid beech Countertop Thickness 40 mm (1 5/8 ) 542.28.795 96.5 (3 13/16) 13.5 1/2") 896

Base Cabinet Pull-Out Units Min. width 112 (4 7/16 ) New Item 495 (19 1/2 ) 490 (19 1/4 ) 15 (5/8 ) 88 (3 1/2 ) 200 (7 7/8 ) 150 (5 7/8 ) Minimum depth of cabinet 485 (19 1/8 ) 2-tier Base Cabinet Pull-out Full-extension slides with integrated self-closing action Installs on either right or left side Includes door mounting brackets Minimum inside width: 112 mm (4 7 / 16") D x W x H: 480 x 110 x 490 mm (18 7/8 x 4 5/16 x 19 5/16 ) chrome 545.17.200 Under-sink storage unit installs left or right Dimensions: 230 x 470 x 405 mm (9" x 18 1 /2" x 16") 470 (18 1 /2") 405 (16") Lockable, pull-out compartment installs left or right Provides convenient access to cleaning supplies. Dimensions: 202 x 432 x 440 mm (8" x 17" x 17 3 /8") 897 230 (9") 280 (11") 620 (24 1 /2") Extended length Color Item No. chrome-plated 545.48.239 (includes screw-mounted upper and lower runners) Color Item No. chrome-plated 545.48.248 (includes runners)

Base Cabinet Storage Systems With Soft & Silent Feature Integrated slide Acid resistant plastic trays Swivel basket can be pushed to the left or right Bottom-mounted Storage unit pull-out, 1 removable basket Dimensions: 161 x 495 x 395 (6 3 8 x 19 1 2" x 15 9 16") chrome polished 545.48.260 Packing: 1 set (includes base, 1 removable basket with handle, 4 dividers) Storage unit pull-out, 2 baskets (1 removable) Dimensions: 274 x 495 x 395 (10 3 16 x 19 1 2" x 15 9 16") chrome polished 545.48.261 Packing: 1 set (includes base, 1 removable basket with handle, 1 basket without handle, 8 dividers) Storage unit pull-out, 3 baskets (1 removable) Dimensions: 274 x 495 x 395 (10 3 16 x 19 1 2" x 15 9 16") chrome polished 545.48.262 Packing: 1 set (includes base, 1 removable basket with handle, 1 basket without handle, 1 swivel basket, 8 dividers) 898

Base Cabinet Storage Systems With Soft & Silent Feature Make the most of a narrow space Mounts on the right-hand side Slides are concealed under the metal trays Soft & Silent feature slows the pull-out just before final closure, creating automatic and silent closing Base cabinet pull-out system Min. 112 (4 1/2") Min. 495 (19 1/2") 256 (10 1/16") Left 50 (2") Right 440 (17 3/8") 2-tier base cabinet pull-out 45º Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 500 mm (19 5 /8") Minimum inside cabinet height: 580 mm (22 3 /4") W x D x H = 104 x 466 x 541 mm (4 1 /8" x 18 3 /8" x 21 1 /4") chrome-plated left 545.61.249 right 545.61.248 (includes textured surface metal trays and full extension slides) 45º/90º 45º/90º Min. 112 (4 1/2") Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") 2-tier base cabinet pull-out 90º Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 540 mm (21 1 /4") Hole centers: 380 mm (15") chrome-plated 545.61.232 (includes textured surface metal trays and full-extension slides) Min. 112 (4 1/2") Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") 3-tier base cabinet pull-out 90º Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 755 mm (29 3 /4") Hole centers: 595 mm (23 3 /8") chrome-plated 545.61.233 (includes textured surface metal trays and full-extension slides) 899

Base Cabinet Storage Systems With Soft & Silent Feature Organize your baking trays, serving trays, or cutting boards Dampening slide slows the pull-out just before final closure, creating automatic and silent closing Make the most of a narrow space Mounts on the right-hand side Base Pull-Out Baking Tray 90º 380 (15") 590 (23 1/4") Min. 112 (4 1/2") Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 590 mm (23 1 /4") Hole centers: 380 mm (15") Complete with full-extension self-closing slides chrome-plated 545.61.272 Base Pull-Out Towel Rail 90º 380 (15") 590 (23 1/4") Min. 112 (4 1/2") Movable Divider, for use on bottom tray Min. 481 (19") 256 (10 1/16") 36 (1 7/16") 440 (17 3/8") Maximum load capacity: 12 kg. (26.4 lbs.) Minimum inside cabinet width: 112 mm (4 1 /2") Minimum inside cabinet depth: 481 mm (19 ") Minimum inside cabinet height: 590 mm (23 1 /4") Hole centers: 380 mm (15") Complete with full-extension self-closing slides chrome-plated 545.61.262 ; Clip holder: plastic, black chrome-plated 545.61.250 900

Base Cabinet Pull-Outs With Soft & Silent Feature Soft & Silent feature slows the pull-out just before final closure, creating automatic and silent closing 27 (1 1/8") A variety of baskets to choose from H Left Right 375 (14 3/4") 247 (9 3/4") 23 (7/8") 465 (18 3/8") 28 (1 1/8") Full Extension Frame Inside cabinet depth: minimum 485 mm (19 1 / 8") Inside cabinet width: basket width + 33 mm (1 5 / 16"), epoxy-coated Inside cabinet Frame Left Right Height min. height mm (inch) mm (inch) silver RAL 9006 499 (19 5 8 ) 497 (19 1 2 ) 545.59.268 545.59.278 599 (23 5 8 ) 597 (23 1 2 ) 545.59.266 545.59.276 663 (26 1 8 ) 661 (26 ) 545.59.267 545.59.277 Front Bracket 90º, for base unit pull-outs, epoxy-coated silver RAL 9006 545.59.298 ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. 901 Storage Basket ARENA Plus, with non-slip surface Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 88 mm (3 1 / 2") Material: Shelf: melamine Surround: steel Non Slip Width mm (inch) 110 160 228 305 (4 3 / 8") (6 1 / 4") (9") (12") white/ chrome-plated 545.60.275 545.60.276 545.60.277 545.60.278 maple/ chrome-plated 545.60.175 545.60.176 545.60.177 545.60.178 Storage Basket Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 75 mm (3") Width mm (inch) chrome-plated 110 (4 3 / 8 ) 545.60.208 160 (6 1 / 4 ) 545.60.217 210 (8 1 / 4 ) 545.60.244 320 (12 1 / 2 ) 545.60.253

Base Cabinet Pull-Outs With Soft & Silent Feature Soft & Silent Feature slows the pull-out just before final closure, creating automatic and silent closing 27 (1 1/8") A variety of baskets to choose from H Right 407 (16") 279 (11") Left 479 (18 7/8") 55 (2 3/16") 45º Full Extension Frame 55 angle baskets Inside cabinet depth: 505 mm (19 7 8") Inside cabinet width: basket width + 33 mm (1 5 / 16") 45 angle baskets Inside cabinet depth: 515 mm (20 1 / 4") Inside cabinet width: basket width + 33 mm (1 5 / 16") Frame Dimensions Depth: 480 mm (18 1 / 2") Width: 37 mm (1 1 / 2"), epoxy-coated Inside cabinet Frame Left Right Height min. height mm (inch) mm (inch) silver RAL 9006 499 (19 5 8 ) 497 (19 1 2 ) 545.59.268 545.59.278 599 (23 5 8 ) 597 (23 1 2 ) 545.59.266 545.59.276 663 (26 1 8 ) 661 (26 ) 545.59.267 545.59.277 396 (15 5/8") 268 (10 1/2") 470 (18 1/2") 44 (1 3/4") 55º ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround The ARENA Plus non-slip surface prevents stored items from sliding Front Bracket, for diagonal base unit pull-outs., epoxy-coated Angle silver RAL 9006 45º 545.59.296 55º 545.59.297 Storage Basket, for diagonal base unit pull-outs. Size: 228 x 467 x 74 mm (9" x 18 3 /8" x 2 7 /8") (width x depth x height), epoxy-coated For chrome-plated Angle 55º right 545.60.226 left 545.60.235 45º right 545.60.224 left 545.60.234 Storage Basket ARENA Plus, for diagonal base unit pull-outs, with non-slip surface. Size: 228 x 470 x 88 mm (9" x 18 1 /2" x 3 1 /2") (width x depth x height) Material: Shelf: melamine Surround: steel For Angle 55º 45º right left right left white 545.60.283 545.60.282 545.60.281 545.60.296 maple 545.60.105 545.60.195 545.60.106 545.60.196 Non Slip 902

Base Cabinet Pull-Outs Self-Closing Left Right Optional front brackets 370 (14 1/2") 242 (9 1/2") Ø 5 468 (18 3/8") 18 (11/16") Base Unit Pull-Out Frame Inside cabinet width:basket width + 33 mm (1 1 / 4") Inside cabinet depth: min. 500 mm (19 3 / 4") Depth: 480 mm (18 1 / 2") Width: 37 mm (1 1 / 2"), epoxy-coated Full extension Inside cabinet Height Left Right Height min. frame mm (inch) silver, RAL 9006 510 (20 1 8 ) 508 mm 545.59.261 545.59.271 610 (24 ) 608 mm 545.59.262 545.59.272 678 (26 3 4 ) 676 mm 545.59.263 545.59.273 Front Bracket, epoxy-coated silver Angle RAL 9006 90 545.59.293 ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround The ARENA plus non-slip surface prevents stored items from sliding 903 Storage Basket ARENA Plus, with non-slip surface Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 88 mm (3 1 / 2") Material: Shelf: melamine Surround: steel Non Slip Width mm (inch) 110 160 228 305 (4 3 / 8") (6 1 / 4") (9") (12") white/ chrome-plated 545.60.275 545.60.276 545.60.277 545.60.278 maple/ chrome-plated 545.60.175 545.60.176 545.60.177 545.60.178 Storage Basket Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 75 mm (3") Width mm (inch) chrome-plated 110 (4 3 / 8 ) 545.60.208 160 (6 1 / 4 ) 545.60.217 210 (8 1 / 4 ) 545.60.244 320 (12 1 / 2 ) 545.60.253

Base Cabinet Pull-Outs Self-Closing Base unit pull-out frame 55 angle baskets Inside cabinet width: 268 mm (10 1 / 2") Inside cabinet depth: 500 mm (19 3 / 4") 45 angle baskets Inside cabinet width: 262 mm (10 3 / 8") Inside cabinet depth: 525 mm (20 5 / 8") Frame Dimensions: Depth: 480 mm (18 1 / 2") Width: 37 mm (1 1 / 2") Left Right 418 (16 1/2") 290 (11 3/8") 397 (15 5/8") 269 (10 5/8") 479 (18 7/8") 66 (2 5/8") 45º 467 (18 3/8") 45 (1 3/4") 55º, epoxy-coated Inside cabinet Frame Left Right Height min. height mm (inch) mm (inch) silver RAL 9006 499 (19 5 8 ) 497 (19 1 2 ) 545.59.268 1 545.59.278 1 599 (23 5 8 ) 597 (23 1 2 ) 545.59.266 2 545.59.276 2 663 (26 1 8 ) 661 (26 ) 545.59.267 3 545.59.277 3 Number Change Front Bracket, epoxy-coated silver Angle RAL 9006 55 545.59.292 45 545.59.291 ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. Storage Basket Size: 228 x 467 x 74 mm (9" x 18 3 /8" x 2 7 /8") (width x depth x height) For Angle chrome-plated 55º right 545.60.226 left 545.60.235 45º right 545.60.224 left 545.60.234 Storage Basket ARENA Plus, with non-slip surface. Size: 228 x 470 x 88 mm (9" x 18 1 /2" x 3 1 /2") (width x depth x height) Material: Shelf: melamine, Surround: steel Non Slip For Angle 55º 45º right left right left white/ chrome-plated 545.60.283 545.60.282 545.60.281 545.60.296 maple/ chrome-plated 545.60.105 545.60.195 545.60.106 545.60.196 904

Base Cabinet Storage Systems With Follower Mechanism - Kesseböhmer New Item For minimum interior width of 562 mm (22 1/8 ) Follower mechanism pulls out the baskets automatically Pull-out shelf, with frame for clip-on baskets Includes ball-bearing slides Dimensions: W x D x H 530 (20 7 /8 ) x 325 (12 3 /4 ) x 600 (23 5 /8 ), epoxy-coated silver RAL 9006 545.63.230 Clip-on basket, for pull-out shelf Dimensions: W x D x H 505 (19 7 /8 ) x 308 (12 1 /8 ) x 74 (2 7 /8 ) chrome-plated 545.64.257 904 A Door frame, with follower Dimensions: W x D x H 540 (21 1 /4 ) x 150 (6 ) x 605 (23 13 /16 ) chrome-plated 545.64.260 Clip-on basket, for door frame Dimensions: W x D x H 160 (6 5 /16 ) x 470 (18 1 /2 ) x 75 (2 15 /16 ) chrome-plated 545.60.217

Base Cabinet Pull-Out System Organizer system allows items to be kept in order Mounts on side wall of cabinet, left or right mounting Ball bearing full extension slides For installation behind hinged doors Complete with spacer blocks to space out to 31 mm (1 1 4 ) With one deep tray, one divider tray, and one small tray with three adjustable hooks Depth: 490 mm (19 5 16 ) Width: 158 mm (6 1 4 ) Height: 481 mm (18 15 16 ) Material: aluminum silver coloured anodized 545.27.510 Packing: 1 set With one small tray, and one double bar with three adjustable hooks Depth: 490 mm (19 5 16 ) Width: 158 mm (6 1 4 ) Height: 481 mm (18 15 16 ) Material: aluminum silver coloured anodized 545.27.512 Packing: 1 set 905 With one deep tray, two short trays, three fixed hooks, and three adjustable hooks Depth: 490 mm (19 5 16 ) Width: 158 mm (6 1 4 ) Height: 481 mm (18 15 16 ) Material: aluminum silver coloured anodized 545.27.520 Packing: 1 set

Base Cabinet Storage Drawers Wire fence, with front brackets to attach drawer front Mounted to drawer bottom, front and rear panel (not supplied) 500 x 136 (19 3 / 4 x 5 3 / 8") chrome-plated 540.91.208 Packing: 1 pair (without drawer runners) Wire fence, with screw-eyes to secure drawer front and rear panel Used on a concealed, inner drawer 500 x 136 (19 3 / 4 x 5 3 / 8") chrome-plated 540.92.205 Packing: 2 pcs. 3. 16 ( 5 /8") Mounting procedure: 1. Cut drawer base and rear panel to size, making allowance for intended drawer runner type. 2. Secure fence to drawer bottom with raised head screws. 3. Secure fence to rear panel. The latter must be secured to the drawer bottom with at least 2 screws to prevent twisting. 4. In case of concealed inner drawers with fence 540.92.205, both drawer fronts and rear panels should be secured as in point 3 above. 5. Secure mounting bracket to drawer front to connect with 3-D bracket on fence. 6. Install and adjust drawer front. Fence 540.92.205 Pan head screws pages 304 305 Fence 540.91.208 Pan Head #8 Pan head screws 4. 130 (5 1 /8") 5. 6. Vertical adjustment screw Horizontal adjustment and fastening screw Tilt adjustment screw 906

Wire Basket Pull-Out Storage System 550 (21 5 /8") Overall Width 110 (4 1 /2") Basket attachment bracket (5/16") 8* 110 (4 3/8") Wire basket pull-out storage system sets Cabinet depth min. 550 mm (21 5 / 8") Load capacity: 20 kg (44 lbs.) Soft-roller extension length: 447 mm (17 5 / 8") /steel-wire, epoxy-coated Brackets and spacers: plastic Installation width* Overall width white mm inch mm inch 255 10 242 9 1 / 2 540.20.718 331 13 318 12 1 / 2 540.20.727 407 16 394 15 1 / 2 540.20.736 483 19 470 18 1 / 2 540.20.745 Packing: 1 set (includes 1 basket, 1 pair soft-roller drawer runners, 8 brackets with screws, 3 spacers,15 mm thick) 12 (15/32") System installed width* 12.5 (1/2") 6 (1/4") 7 (9/32") * Installed width without spacers. The spacers permit the system installation width to be expanded on each side from 3 mm to 21 mm (max.) Optional bottom-mount bracket For soft-roller drawer slides 4 each required per basket, epoxy-coated white 540.20.905 Packing: 1 set (4 pcs. with screws) Stackable spacers, for adequate clearance of the projecting door hinges on the hinge-side of the cabinet 907 ø 5.4 8 4 3 5 9 Ø 20.5 Material: plastic Cap thickness white 4 mm 037.93.708 3 mm 037.93.717 5 mm 037.93.726 9 mm 037.93.735 Packing: 100 pcs. Total spacer thickness not to exceed 21 mm

Base Cabinet Storage Drawers Internal Drawer Baskets 135 (5 3/8") External panel width Internal drawer basket Low front for easy access Includes full-extension ball-bearing slides, with self-closing action Load carrying capacity: 30 kg (66 lbs) Installation depth: 505 mm (19 7 / 8") Basket dimensions: Depth: 500 mm (19 3 / 4") Height: 127 mm (5") Material: Body: steel Slides: steel, galvanized Inside VARIANTA 5 cabinet width Basket width chrome-plated 368 (14 1 / 2") 345 (13 5 / 8") 540.25.203 418 (16 1 / 2") 395 (15 1 / 2") 540.25.204 468 (18 3 / 8") 445 (17 1 / 2") 540.25.205 568 (22 3 / 8") 545 (21 1 / 2") 540.25.207 Packing: 1 set 18 (3/4") 16-19 (5/8"-3/4") Section view from the front ARENA is the result of a manufacturing technology that seals melamine material with a polished chrome surround. The ARENA plus non-slip surface prevents stored items from sliding. 135 (5 3/8") 18 (3/4") 16-19 (5/8"-3/4") External panel width Section view from the front Varianta screws page 311 Internal drawer basket ARENA Plus With non-slip surface Includes full-extension ball-bearing slides, with self-closing action Basket dimensions: Depth: 488 mm (19 1 / 4") Height: 125 mm (4 7 / 8") Material: Shelf: melamine Surround: steel Slides: steel, galvanized Non Slip Inside cabinet Basket width width white/ maple/ maple/ chrome-plated chrome-plated champagne 368 (14 1 / 2") 352 (13 7 / 8") 540.25.263 540.25.163 540.25.463 418 (16 1 / 2") 402 (15 7 / 8") 540.25.264 540.25.164 540.25.464 468 (18 3 / 8") 452 (17 3 / 4") 540.25.265 540.25.165 540.25.465 568 (22 3 / 8") 552 (21 3 / 4") 540.25.267 540.25.167 540.25.467 Packing: 1 set 908

Cabinet Accessories Kesseböhmer New Item Perfect for aluminum framed glass doors. Adds contemporary flair to open shelving. 908 A Metal Storage Racks Inside cabinet width chrome-plated 16 mm ( 5 8") 19 mm ( 3 4") side panels side panels Width Depth Depth mm inch mm inch mm inch 260 mm (10 1 4") 490 mm (19 1 4") 418 (16 1 2") 412 (16 1 4") 407 (16") 545.71.201 545.71.221 468 (18 3 8") 462 (18 1 4") 457 (18") 545.71.202 545.71.222 568 (22 3 8") 562 (22 1 8") 557 (21 7 8") 545.71.203 545.71.223 768 (30 1 4") 762 (30") 757 (29 3 4") 545.71.204 545.71.224 868 (34 1 8") 862 (34") 857 (33 3 4") 545.71.205 545.71.225 968 (38 1 8") 962 (37 7 8") 957 (37 5 8") 545.71.206 545.71.226 1168 (46") 1162 (45 3 4") 1157 (45 1 2") 545.71.207 545.71.227 Packing: 2 pcs. (includes plastic rack supports and screws) The rack supports fit cabinet side panel thickness of 16 and 19 mm (5/8" and 3/4"). They also function as safety clips during transport.

Wicker Basket For framed or frameless 15" or 18" cabinets Install in or between two cabinets Baskets are woven over solid beech frames which slide on runners (sold separately) For installation, calculate frame width less 6 mm (1/4") for ease of use of runners 16 mm (5/8") H W D Wicker Baskets with beech frame Two handles drilled into frame (Order runners separately) Material: Wicker basket: natural, dipped Frame: beech, lacquered Flat Head #8 Width Depth Height Dimension W Dimension D Dimension H 287 mm (11 5 / 16") 540 mm (21 1 / 4") 200 mm (7 7 / 8") 540.55.001 363 mm (14 5 / 16") 540 mm (21 1 / 4") 200 mm (7 7 / 8") 540.55.002 6 30 B 36 224 224 540 A 6 B A 30 909 For 15" framed cabinets Basket 540.55.001 Runner 540.55.992 For 18" framed cabinets Basket 540.55.002 Runner 540.55.992 Runners for wicker baskets Material: beech, lacquered Dimension A Dimension B 34 mm (1 3 / 8") 25 mm (1") 540.55.991 40 mm (1 5 / 8") 31 mm (1 1 / 4") 540.55.992 Packing: 1 pair For 15" frameless cabinets Basket 540.55.001 Runner 540.55.991 For 18" frameless cabinets Basket 540.55.002 Runner 540.55.991 Flat head screws pages 302 304

Wicker Baskets Made from European wickers of natural brown colour Hand-woven Wicker Basket, free standing Material: wicker W x D x H natural brown H D W 240 x 240 x 200 540.57.071 (9 1 2" x 9 1 2" x 7 3 4") 250 x 250 x 250 540.57.072 (9 3 4" x 9 3 4" x 9 3 4") 340 x 240 x 340 540.57.073 (13 3 8" x 9 1 2" x 13 3 8") H D W Wicker Basket, free standing Material: wicker W x D x H natural brown 287 x 540 x 200 540.57.081 (11 1 4" x 21 1 4" x 7 3 4") 363 x 540 x 200 540.57.082 (14 1 4" x 21 1 4" x 7 3 4") Boards are finished with vegetable oil Groove carved along edge to avoid spills Use runners to install along with framed baskets from page 909 W D Chopping Board 2 handles 4 supports/grips Material: beech, oiled W x D x H 363 x 540 x 20 521.65.104 (14 1 4" x 21 1 4" x 3 4") 521.65.114* *521.65.114 is stamped with a fish symbol to be used for seafood. 910

Pantry Organization Pantry Pull-out Unit with Soft & Silent Feature Maximum width of cabinet: 597 (23 5/8") Storage basket options on pages 913 914 B 375 (14 3/4") 495 (19 1/2") A A Full extension pantry frame - height adjustable, epoxy powder-coated Cabinet width Installed height silver Ral 9006 champagne 300 12" 1200-1600 47 1 /4"-63" 546.77.220 546.77.420 300 12" 1600-2000 63"-78 3 /4" 546.77.240 546.77.440 300 12" 1900-2300 74 3 /4"-90 1 /2" 546.77.260 546.77.460 400 16" 1200-1600 47 1 /4"-63" 546.77.230 546.77.430 400 16" 1600-2000 63"-78 3 /4" 546.77.250 546.77.450 400 16" 1900-2300 74 3 /4"-90 1 /2" 546.77.270 546.77.470 Packing: 1 set (includes front frame, front fixing brackets and centre frame) Extension runner B must be ordered separately. Installed dimensions: Depth: minimum 500 mm (20") Height: 1200-1600 mm (47 1 /4" - 63") 1600-2000 mm (63" - 78 3 /4") 1900-2300 mm (74 3 /4" - 90 1 /2") Width: 260 mm (10 1 /4") to 360 mm (14 1 /8") B Full extension runner shallow height, epoxy powder-coated silver RAL 9006 546.71.291 Text [champagne] 546.71.491] Change (includes upper and lower runners) 475 (18 11/16") 71 (2 3/4") 225 (325) (8 7/8) (12 3/4") 25 (1") Extended length 470 (18 1 /2") 500 (20") B Text Change Stabilizer bar For attachment to framed doors., epoxy-coated 250 mm 350 mm (9 3/4 ) (13 3/4 ) silver RAL 9006 546.76.201 546.76.210 [champagne] 546.76.401 546.76.410] Soft & Silent Feature, for top slide Clips onto pantry (no tools required) Material: plastic grey 546.71.970 Soft & Silent Feature, for bottom slide Material: plastic grey grey 546.74.792 Packing: 10 pcs. 911 Text Change Text Change Front stabilizer Can be secured anywhere to the support frame., epoxy-coated silver RAL 9006 546.76.220 [champagne] 546.76.420] Basket Holder To be used as add-on hooks when pantry frame height is extended. Height: 125 mm (5"), epoxy-coated silver RAL 9006 545.84.280 [champagne] 545.84.480] Packing: 1 set (2 pcs.)

Pantry Organization Swing Pantry Pull-Out Unit Swing pantry allows for easy front access of stored contents Swings left or right Minimum of 375 mm (14") clearance required to adjacent wall Minimum of 650 mm (25 5/8") clearance required for door extension Storage basket options on pages 913 914 Clearance required for corner installation B 375 (14 3/4") 495 (19 1/2") Pantry Pull-out swing unit with integrated soft & silent feature Installed dimensions: Depth: minimum 500 mm (20") Width: minimum 262 mm (10 5 /16") C D A Extension runner B, Front bracket C, and Stabilizer bar D must be ordered separately. A Pantry frame Consists of telescopic frame with hooks and front panel connector strips., epoxy-coated Installed height mm inch silver RAL 9006 1200-1400 47 1 /4" - 55 1 /8" 546.69.241 1400-1600 55 1 /8" - 63" 546.69.242 1600-1800 63" - 70 7 /8" 546.69.243 1800-2000 70 7 /8" - 78" 546.69.244 2000-2200 78" - 86 5 /8" 546.69.245 Packing: 1 set Max. 70 mm (2 3/4") Min. 375 mm (14") Max. 70 mm (2 3/4") Min. 650 mm (25 5/8") 225 (325) (8 7/8) (12 3/4") B Full extension runner Consists of upper runner with integrated soft & silent feature and lower runner with integrated turn feature. Maximum capacity: 70 kg. (154 lbs.), epoxy-coated silver RAL 9006 546.69.200 Front stabilizer Can be secured anywhere to the support frame. For panel (slab) door attachment., epoxy-coated silver RAL 9006 546.76.220 C 25 (1") 475 (18 11/16") 500 (20") Extended length 538 (21 1/16") 89 (3 1/2") D Stabilizer bar - optional For attachment to tall doors., epoxy-coated Width silver RAL 9006 250 mm (9 3 /4") 546.76.201 350 mm (13 3 /4") 546.76.210 B C Front bracket Required for attachment to top and bottom of pantry frame., epoxy-coated, silver RAL 9006 For Cabinet Width Bracket Width silver RAL 9006 300 mm (9 3 /4") 546.86.200 400 mm (13 3 /4") 546.86.210 500 mm (19 11 /16") 546.86.240 Packing: 1 set (2 pcs. required per frame). Basket holder To be used as add-on hooks when pantry frame height is extended. Height: 125 mm (5"), epoxy-coated silver RAL 9006 545.84.280 Packing: 1 set (2 pcs.) 912

Storage Baskets Recommended number of storage baskets. Installation height Number of baskets 1195-1685 (47-66 1 2 ) 4 1255-1745 (49 1 2-68 1 2 ) 1590-2080 (62 1 2-82 ) 6 1650-2140 (65-84 1 2 ) 1895-2380 (74 1 2-93 1 2 ) 8 1955-2440 (77-96 ) ARENA is the result of a manufacturing technology that seals melamine material with a steel wire surround. The ARENA Plus non-slip surface prevents stored items from sliding. Non Slip Storage Basket ARENA Plus, with non-slip surface Material: Shelf: melamine Surround: steel Cabinet width W x D x H white/ maple/ chrome-plated chrome-plated 300 mm (11 3 4") 250 x 450 x 105 545.60.265 545.60.165 (9 3 4"x 17 3 4" x 4") 400 mm (15 3 4") 350 x 450 x 105 545.60.266 545.60.166 (13 3 4"x 17 3 4" x 4") 450 mm (17 3 4") 400 x 450 x 105 545.60.267 545.60.167 (15 3 4"x 17 3 4" x 4") Storage basket, hook-on Cabinet width W x D x H chrome-plated 300 mm (11 3 4") 250 x 467 x 110 546.75.204 (9 3 4" x 18 1 2" x 4 1 4") 400 mm (15 3 4") 350 x 467 x 110 546.75.213 (13 3 4" x 18 1 /2" x 4 1 4") 913 Storage shelf, for storage basket 546.75. Material: plastic Cabinet width W x D x H white RAL 9010 300 mm (11 3 4") 238 x 450 x 12 546.75.780 (9 3 8" x 17 3 4" x 1 2") 400 mm (15 3 4") 338 x 450 x 12 546.75.781 (13 1 4" x 17 3 4" x 1 2") Crossbar and end clips, for use with storage baskets Material: End clips: plastic Bar: steel, epoxy-coated or plated Cabinet width chrome-plated/black 250 mm (9 3 4") 545.89.212 400 mm (15 3 4") 545.89.221

Storage Baskets Customer provides wood liner to be installed in the shelf support. The required dimensions are: 249 mm x 419 mm x 16 mm (9 3 4 x 16 1 2 x 5 8 ) Basket clip holds baskets on pantry pull-out 546.77 during shipping Recommended number of storage baskets. installation height Number of baskets 1195-1685 (47-66 3 8 ) 4 1255-1745 (49 1 2-68 3 4 ) 1590-2080 (62 5 8-81 7 8 ) 6 1650-2140 (64 3 4-84 1 4 ) 1895-2380 (74 5 8-93 7 8 ) 8 1955-2440 (78 1 2-96 ) Shelf support, hook-on Cabinet width W x D x H chrome-plated 300 mm (11 3 4") 250 x 460 x 110 546.75.222 (9 7 8 x 18 1 8 x 4 1 4 ) 400 mm (15 3 4") 350 x 460 x 110 546.75.231 (13 3 4" x 18 1 8" x 4 1 4") Basket clip, for storage baskets Material: plastic transparent 546.75.090 Packing: 10 pcs. Storage Containers For Pantry Pull-out Units 546.69 and 546.77 Practical and decorative storage made from high quality, translucent plastic Container Set, with lids Capacity: 1.2 liters (1.25 quarts) Material: Container: plastic, translucent w/grey lid Support: steel, epoxy-coated silver RAL 9006 L x D x H 90 x 108 x 190 silver RAL 9006 546.79.500 (3 1 /2" x 4 1 /4" x 7 1 /2") champagne 546.79.400 Packing: 1 set (includes support element, 4 containers) Container Set, open Material: Container: plastic, translucent Support: steel, epoxy-coated silver RAL 9006 L x D x H 210 x 120 x 120 silver RAL 9006 546.79.510 (8 1 /4" x 4 3 /4" x 4 3 /4") champagne 546.79.410 Packing: 1 set (includes support element, 2 containers, 1 divider) 914

Pantry Organization Single Extension - Kesseböhmer New Item Pantry Pull-out, height adjustable Single extension, hooks on one side Left or right mounting to upper and bottom panel Weight capacity 40 kg. (88 lbs.) Inside cabinet depth: 500 mm (19 3/4 ) Height: 1160 mm (45 3/4 ) - 1495 mm (58 7/8 ), epoxy-coated silver RAL 9006 545.78.200 ARENA is the result of a manufacturing technology that seals melamine material with a polished chrome surround The ARENA Plus non-slip surface prevents stored items from sliding 914 A Storage Basket ARENA Plus, with non-slip surface Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 88 mm (3 1 / 2") Material: melamine shelf with steel, chrome-plated surround Non Slip Width mm (inch) / 110 160 228 305 (4 3 / 8") (6 1 / 4") (9") (12") white/ chrome-plated 545.60.275 545.60.276 545.60.277 545.60.278 maple/ chrome-plated 545.60.175 545.60.176 545.60.177 545.60.178 Storage Basket Basket dimensions: Depth: 470 mm (18 1 / 2") Height: 75 mm (3") Width mm (inch) chrome-plated 110 (4 3 / 8 ) 545.60.208 160 (6 1 / 4 ) 545.60.217 210 (8 1 / 4 ) 545.60.244 320 (12 1 / 2 ) 545.60.253

Chef s Pantry Frame must always mount on the right 110 opening angle hinge required Chef s Pantry Pull-Out Frame Inside height: from 1100 mm (43 5/16 ), 4 shelves from 1700 mm (67 ), 6 shelves Inside depth: minimum 500 mm (19 3/4 ), epoxy-coated Height Cabinet width silver RAL 9006 1100 mm 450 mm (17 3/4 ) 545.94.220 (43 5/16 ) 500 mm (19 3/4 ) 545.94.222 600 mm (23 5/8 ) 545.94.224 1700 mm 450 mm (17 3/4 ) 545.94.221 (67 ) 500 mm (19 3/4 ) 545.94.223 600 mm (23 5/8 ) 545.94.225 Load capacity: Minimum inside cabinet width: pull-out shelf 50 kg. (110 lbs.) 450 mm (17 3/4 ) door shelf 20 kg. (44 lbs.) 412 mm (16 3/16 ) pull-out shelf 50 kg. (110 lbs.) 500 mm (19 3/4 ) door shelf 20 kg. (44 lbs.) 462 mm (18 3/16 ) pull-out shelf 60 kg. (132 lbs.) 600 mm (23 5/8 ) door shelf 25 kg. (55 lbs.) 562 mm (22 1/8 ) 915 Closed Open

Chef s Pantry Weight of door is supported by brackets that attach to side panel Door shelf, for left and right door mounting Inside height: 1100 mm (43 5 / 16"), 4 shelves 1700 mm (67 ), 6 shelves Height Cabinet width chrome polished 1100 mm 450 mm (17 3/4 ) 545.94.280 (43 5/16 ) 500 mm (19 3/4 ) 545.94.282 600 mm (23 5/8 ) 545.94.284 1700 mm 450 mm (17 3/4 ) 545.94.281 (67 ) 500 mm (19 3/4 ) 545.94.283 600 mm (23 5/8 ) 545.94.285 Door shelf, ARENA Plus, for left and right door mounting Inside height: 1100 mm (43 5 / 16"), 4 shelves; Shelves: melamine 1700 mm (67 ), 6 shelves Height Cabinet width chrome polished/ maple 1100 mm 450 mm (17 3/4 ) 545.94.390 (43 5/16 ) 500 mm (19 3/4 ) 545.94.392 600 mm (23 5/8 ) 545.94.394 1700 mm 450 mm (17 3/4 ) 545.94.391 (67 ) 500 mm (19 3/4 ) 545.94.393 600 mm (23 5/8 ) 545.94.395 ARENA is the result of a manufacturing technology that seals melamine material with a polished chrome surround The ARENA Plus non-slip surface prevents stored items from sliding Non Slip Storage Basket, for pull-out frame Depth x height: 275 mm x 80 mm (10 7 / 8" x 3 1 / 4") Cabinet width chrome polished 450 mm (17 3 / 4") 545.95.245 500 mm (19 3 / 4") 545.95.246 600 mm (23 5 / 8") 545.95.247 Packing: 2 pcs. Storage Basket ARENA Plus for pull-out frame, with non-slip surface Depth x height: 275 mm x 88 mm (10 7 / 8" x 3 1 / 2") Material: Shelf: melamine Surround: steel Cabinet width maple/chrome-plated 450 mm (17 3 / 4") 545.95.345 500 mm (19 3 / 4") 545.95.346 600 mm (23 5 / 8") 545.95.347 Packing: 2 pcs. 916

Gourmet Pantry Unit Large storage capacity in a small space Baskets individually height adjustable Fits cabinets with: Inside width: 862 mm (34") Inside height: 1270 mm (50") Inside depth: 500 mm (19 11 / 16") Ordering suggestion: 1 set Gourmet pantry 545.92.700/200 20 pcs. Baskets, large 545.93.207 10 pcs. Baskets, small 520.81.213 Frames Set 2 swivel frames 2 extension frames 2 upper runners with stop 2 lower runners 2 upper bearing brackets 2 lower bearing brackets with ball-bearings 2 upper and 2 lower lever arms 2 upper and 2 lower safety covers 2 door catches for the swivel frames 4 door rails, 1130 mm, and all accessories for the assembly., epoxy-coated silver 545.92.200 Packing: 1 set Screws are not included Storage baskets, for swivel and extension frames. Size: (W x D x H) 368 x 205 x 82 mm chrome-plated 545.93.207 Storage basket, for standard rails. Size: (W x D x H) 300 x 75 x 75 mm chrome-plated 520.81.213 Note: Please use door hinges with 125º opening angle. 917 Flat Head #6 862 (34") 395 (15 9 /16") 40 (1 9 /16") Flat Head #8 500 (19 11 /16") 70 (2 3 /4") Pan Head #9 Function: Doors opened Swivel frame turns out, extension frame pulls forward automatically. Flat head screws pages 302 304 Pan head screws pages 304 305

Pull-Out Storage Units Corner Unit Set New Item Door frame Hanging frame Storage basket 305/370 (12 /14 5/8 ) Depending on cabinet front width Adapter 375/425/525 plate 336 (13 1/4 ) z 450/430 (17 3/4 /16 7/8 ) x Door strike side x = 22.5 mm (7/8 ) + door overlap z = 106 mm (4 3/16 ) + door overlap 465 (18 5/16 ) 435 (17 1/8 ) 1 2 3 Photos and drawings show right hand version Door frame follower 76 (3 ) Back frame Soft-close dampener 85 (3 3/8 ) Door panel plate 475 (18 11/16 ) Complete Corner Storage Unit Set, with pull-out action Minimum built-in depth: 490 mm (19 5/16 ) for cabinets 900 mm (35 7/16 ) wide Minimum built-in height: 530 mm (20 7/16 ) Designed so that rear baskets automatically follow front baskets when door is pulled away from the cabinet The pull-out cabinet automatically swings until it reaches maximum swing position Automatic pull-out action Door panel plates are 3-way adjustable for 450 (17 3/4 ) and 600 mm (23 5/8 ) door widths) Material: Hanging frame, door frame, back frame, & door follower: steel, tubular epoxy-coated Door panel plates: steel, epoxy-coated silver Storage baskets: steel, chrome-plated Left hand set 546.16.251 Right hand set 546.16.250 Packing: 1 set (includes 1 hanging frame, 1 door frame, 1 back frame, 1 door frame follower, 4 door panel plates, 1 door frame follower, [4] mesh wire storage baskets, mounting hardware and instructions) Text Change *Note: Soft & Silent feature included in the door frame follower and the back frame. 917 A

Pull-Out Storage Units For Twin Corner Cabinets New Item Pull-Out Shelving Unit Minimum built-in depth: 490 mm (19 5/16 ) Left or right handed Designed so that the pull-out section automatically begins to pivot as the unit is being pulled out of the cabinet Material: Pull-out and pivot mechanism: steel Shelves: Base: wood, laminated; : white Surround: steel, chrome polished For cabinet width For door width Left hand Right hand 900 mm (35 7/16 ) 450 mm (17 3/4 ) 542.08.246 542.08.245 1000 mm (39 3/8 ) 500 mm (19 3/4 ) 542.08.251 542.08.250 1200 mm (47 1/4 ) 600 mm (23 5/8 ) 542.08.261 542.08.260 Packing: 1 set (includes 2 shelves, 1 pull-out and pivoting mechanism, mounting hardware and instructions) 917 B Min 90 mm for a 490 mm (3 9/16 ) (19 5/16 ) Right hand version shown

Pull-Out Storage Units New Item Pull-Out Frame Minimum installation depth: 495 mm (19 1/2 ) Left or right handed, epoxy-coated silver 546.39.996 Packing: 1 set (includes 1 pull-out frame 90º, 1 soft-close dampener, and mounting hardware) 581 (22 7/8 ) 472 (18 5/8 ) 450 (17 3/4 ) Top Bottom 230 (9 1/8 ) 470 (18 1/2 ) 80 (3 1/8 ) Storage Basket Set 900 Minimum installation depth: 495 mm (19 1/2 ) Left or right handed Material: Basket: steel, heavy gauge, chrome-plated Clips & door hanging plates: steel, zinc-plated Base 85 mm (3 3/8 ) 546.39.240 132 mm (5 3/16 ) 546.39.241 230 mm (9 1/16 ) 546.39.243 Packing: 1 set (includes 2 storage baskets, 4 basket securing clips, and 2 door hanging plates) 917 C

Pull-Out Storage Units Pantry Unit with Soft & Silent Feature Hanging frame Top runner B New Item Storage basket E Door mounting bars D Basket hanging clip Storage basket C A Hanging frame 85 (3 3/8 ) 250 (9 7/8 ) 350 (13 3/4 ) 450 (16 3/4 ) 550 (21 5/8 ) 430 (16 7/8 ) Open Closed Front panel Front panel Pantry Unit Complete 0D0 0Minimum built-in depth: 475 mm (18 11/16 ) Choice of 6 heights and 4 cabinet widths Centre mounting, height adjustable, full extension Door panel plates are 3 way adju0d0 0 Material: Hanging frame, door panel mounting bar, & door hanging plate: steel, epoxy-coated Top and bottom runners: steel, zinc-plated; Storage baskets: steel, chrome-plated Basket hanging clip: plastic; : grey Packing: 1 set (includes 1 hanging frame, 1 top and 1 bottom runner, 1 height adjustable hanging frame, basket hanging clips, 2 door mounting bars, 1 soft close dampener, storage baskets, mounting hardware and instructions) 917 D Door hanging plate Bottom runner 465 (18 3/8 ) 475 (18 3/4 ) Installed height 950 1200 1200 1450 1450 1700 1700 1950 1900 2150 2150 2350 (37 3/8 47 1/4 ) (47 1/4 57 ) (57 67 ) (67 76 3/4 ) (74 3/4 84 5/8 ) (84 5/8 92 1/2 ) For cabinet width Basket width 300 mm (11 13/16 ) 250 mm (9 7/8 ) 547.21.501 547.21.502 547.21.503 547.21.504 547.21.505 547.21.506 400 mm (15 3/4 ) 350 mm (13 13/16 ) 547.21.511 547.21.512 547.21.513 547.21.514 547.21.515 547.21.516 500 mm (19 11/16 ) 450 mm (17 3/4 ) 547.21.521 547.21.522 547.21.523 547.21.524 547.21.525 547.21.526 600 mm (23 5/8 ) 550 mm (21 11/16 ) 547.21.531 547.21.532 547.21.533 547.21.534 547.21.535 547.21.530 A Hanging frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Parts included in pantry unit sets, according to installed height required. F B Top & bottom runners 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. C Storage basket 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. D Basket hanging clip 6 pcs. 8 pcs. 8 pcs. 10 pcs. 10 pcs. 14 pcs. E Door mounting bar 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. F Door hanging plate 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. B

Pull-Out Storage Units Swing-Out Pantry Unit with Soft & Silent Feature Top runner New Item 325 315 Door follower Door mounting frame Door frame mounting arm Hanging frame Door frame support hinges Standard door version: baskets 400 mm (15 3/4 ) wide Door frame mounting arm Basket securing clip Door mounting frame Basket hanging clip Door frame support hinges Closed Open Swing-Out Pantry Unit Minimum built-in depth: 480 mm (18 7/8 ) for cabinets 900 mm (35 7/16 ) wide Choice of 7 heights and 3 cabinet widths Sets with cabinet with framed doors also include 4 spacers for use with door frame support hinges Centre mounting, height adjustable, full extension Attach the storage baskets onto the frame by using hanging clips, and secure with the securing clips 350 mm (13 3/4 ) baskets included in door frame version sets Spacers included for door frame version only Soft & Silent feature included See ordering information on page 917 F Installed height 650-950 950-1200 1200-1450 1450-1700 1700-1950 1900-2100 2100-2350 (25 5/8 37 3/8 ) (37 3/8 47 1/4 ) (47 1/4 57 ) (57 67 ) (67 76 3/4 ) (74 3/4 84 5/8 ) (84 5/8 92 1/2 ) Hanging frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Door mounting frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Top and bottom runners 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Door followers 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Storage baskets (frame) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. Storage baskets (door) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. Basket hanging clips 4 pcs. 6 pcs. 8 pcs. 8 pcs. 10 pcs. 10 pcs. 14 pcs. Basket securing clips 4 pcs. 6 pcs. 8 pcs. 8 pcs. 10 pcs. 10 pcs. 14 pcs. Door frame hinges 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Door frame mounting arms 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Packing: 1 set (includes 1 hanging frame, 1 top and 1 bottom runner, 1 height adjustable hanging frame, basket hanging clips, 2 door mounting bars, 1 soft close dampener, storage baskets, mounting hardware and instructions) Storage baskets page 917 F Door frame mounting arm Material: Hanging frame, door panel mounting bar, & door hanging plate: steel, epoxy-coated Top and bottom runners: steel, zinc-plated; Storage baskets: steel, chrome-plated Basket hanging clip: plastic; : grey Bottom runner Door follower 917 E

Pull-Out Storage Units Swing-Out Pantry Unit with Soft & Silent Feature New Item 60 (2 3/8 ) 80 (3 1/8 ) 110 (4 3/8 ) 365 (14 3/8 ) 350/400 (13 3/4 /15 3/4 ) 310 (12 1/4 ) Swing-Out Pantry Unit Storage Baskets Choice of 7 heights For cabinet widths: 450 mm (17 3/4 ), 500 mm (19 11/16 ), and 600 mm (23 5/8 ), chrome-plated Installed height 650-950 950-1200 1200-1450 1450-1700 1700-1950 1900-2100 2100-2350 (25 5/8 37 3/8 ) (37 3/8 47 1/4 ) (47 1/4 57 ) (57 67 ) (67 76 3/4 ) (74 3/4 84 5/8 ) (84 5/8 92 1/2 ) Hanging frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Door mounting frame 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. 1 pc. Top and bottom runners 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. 2 pcs. Storage baskets (frame) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. Storage baskets (door) 2 pcs. 3 pcs. 4 pcs. 4 pcs. 5 pcs. 5 pcs. 7 pcs. For cabinet width 450 mm (17 3/4 ) 547.27.200 547.27.201 547.27.202 547.27.203 547.27.204 547.27.205 547.27.206 500 mm (19 11/16 ) 547.27.210 547.27.211 547.27.212 547.27.213 547.27.214 547.27.215 547.27.216 600 mm (23 5/8 ) 547.27.220 547.27.221 547.27.222 547.27.223 547.27.224 547.27.225 547.27.220 Packing: 1 set 917 F

Waste Bins For Countertop Mounting 500 (19 5 /8") Waste Bin, free standing Capacity: 41 litres (11 gal.) Material: Lid: plastic Housing: steel, epoxy-coated white 502.30.718 260 (10 1 /4") 340 (13 5 /8") Inner Grommet Discontinued Sealed lid Grommet to line in counter top cut-out Sealing strip Waste Bin Mounts in countertops up to 40 mm (1 1 / 2") thick Material: plastic white 502.54.709 (includes mounting hardware (4 clamps and screws), mounting instructions and template) Dotted line = bin liner Fixing clamps and screws to secure outer grommet from underneath the counter top Outer grommet Drip tray Drip tray 254 (10") 235 (9 1 /4") 227 (9") 68 (2 5 /8") 365 (14 3 /8") 65 (2 1 /2" Flush mounting Surface mounting Single Waste Bin Capacity: 11 litres (3 gal.) For flush or surface mounting With stainless steel and soft rubber ring Material: Lid: stainless steel Bin: plastic stainless steel/black 502.94.000 918

Waste Bins For Swing-Out Behind Doors Waste bin can be mounted for left or right hand use Features lid in the cabinet, as the door is opened the lid tilts automatically Waste Bin, side panel mounted For cabinet widths over 250 mm (10") For cabinet depths over 192 mm (7 1 /2") MINIMUM 175 (6 7/8") 175 (6 7/8") CABINET WIDTH Capacity: 5 litres (1.25 gal.) Material: plastic white 502.63.726 (includes mounting instructions and hardware) 340 (13 3/8") Waste Bin, side panel mounted For cabinet widths over 400 mm (15 3 /4) MINIMUM 357 (14") 380 (15") 305 (12") Capacity: 15 litres (4 gal.) Material: Lid: plastic, white Pail: plastic, light grey CABINET WIDTH Housing: white, plastic-coated 502.12.729 stainless steel, polished 502.12.023 (includes mounting instructions and hardware) New Item Replacement Bin Material: plastic Capacity grey 15 litres 502.12.998 Cabinet side panel Door 919 Door Strike Cabinet floor (3 3/16") Toekick Cabinet side panel Pedal 80 mm Min. 3 3/16" Door Pedal Spring-loaded roller arm Strike Door Opener for Hinged Base Cabinet Doors Material: Pedal: plastic, brown Strike: steel Spring loaded roller arm: plastic white 502.15.033

Waste Bins For Hinged Door Cabinets With spring-loaded lid lifting mechanism, the lid automatically remains in the cabinet when the door is opened Fits cabinet widths of 400 mm Can be mounted left or right handed New Item 365 305 Big Box Round Waste Bin Material: Housing: stainless steel or epoxy-coated steel Mounting components, trim & lid: polished aluminum Inner bin: plastic, light grey Capacity [stainless steel aluminum] 20 litres 502.23.062 white 15 litres 502.23.731 Text Change 526 Cabinet width min. 400 Installation width min. 365 Installation depth min. 305 919 A

Waste Bins For Swing-Out Doors 199 (8") 376 (14 7 /8") 450 (17 3 /4") MINIMUM Waste Bin, side panel mounted For cabinet widths over 450 mm (18") Left or right mounting Capacity: 18 litres (4.75 gal.) CABINET WIDTH Material: plastic stainless steel 502.62.014 white/light grey 502.62.710 450 450 (17 3 /4") 376 (14 7 /8") 390 (15 390 3 /8") 175 175 (6 7 /8") 335 (1335 1 /8") MINIMUM Add on Kit For 502.62.710/014 Attaches to rear of waste bin, offering second waste bin. For installation depth of over 380 mm (15") Capacity: 5 litres (1.25 gal.) Material: plastic white/light grey 502.63.717 CABINET WIDTH Mounts to cabinet side or rear wall. 10 ( 3 /8") 62 (2 3 /8") 9 1 /4" 130 (5 1 /8") for sidewall mounting 61 (2 3 /8") ca.175 (6 7 /8") 25 178 (7") 359 (14 1 /8") min. 400 (15 3 /4") Waste Bin Rear or side wall-mounted Manual pull-out with metal rod for waste bin suspension Capacity: 8 litres (2 gal.) Material: plastic steel, chrome-plated white 502.89.700 (includes fastening screws) Replacement bin Capacity: 18 litres (4.75 gal.) Material: plastic Cat.No. light grey 502.61.937 920

Waste Bins Pull-Out for Installation Behind Hinged Doors Mounts to cabinet bottom Features lid in the cabinet principle, as the door is opened the lid tilts automatically Optional pull-out tray for paper recycling can be added above waste bins 420 (16 1 /2") Waste Bin, floor-mounted, manual extension For cabinet widths over 300 mm (11 3 /4) Capacity: 20 litres (5.25 gal.) Material: Holder: steel, epoxy-coated Cover: plastic Pails: plastic MINIMUM CABINET WIDTH white/grey-brown 502.43.706 245 (9 5 /8") 425 (16 3 /4") Replacement Bin Material: plastic brown 502.43.902 Discontinued 248 (9 3 /4") Double Waste Bin, floor-mounted, manual full-extension For cabinet widths over 300 mm (11 3 /4") Capacity: 2 x 15 litres (4 gal.) Material: Holder: steel, epoxy-coated Cover: plastic Pails: plastic MINIMUM CABINET WIDTH 407 white/green and brown 502.70.767 (16") 921 479 (19") Replacement Bins for 502.70 series Material: plastic Capacity 15 litres brown 502.71.193

Waste Bins Pull-Out Easy and fast installation (only 4 screws) Lid snaps on Practical storage area on top of lid Use with a hinged door Load capacity = 40 kg (88 lbs.) 100,000 cycle tested Easy Cargo 40 Bottom mounted, full-extension with ball bearing telescoping slides Compatible with 18 face frame cabinets or 15 frameless cabinets Outside cabinet width from 400 mm (15 3/4 ) Capacity: 40 litres (10.5 gal.) Material: Frame: metal, silver Waste bins: plastic grey [502.43.520] (includes mounting screws) Number Change 320 (12 5/8 ) 542 (21 3/8 ) 465 (18 5/16 ) Easy Cargo 50 Bottom mounted, full-extension with ball bearing telescoping slides Compatible with 21 face frame cabinets Outside cabinet width from 500 mm (19 3/4 ) Capacity: 49 litres (13 gal.) (1x 30 litres (8 gal.), 1 x 19 litres (5 gal.) Material: Frame: metal, silver Waste bins: plastic grey [502.70.522] (includes mounting screws) Number Change 430 (17 ) 455 (18 ) 465 (18 5/16 ) 922

Waste Bins Pull-Out Door Mounted Uno Waste Bin - Pull-Out Mounts directly to pull out shelf Bottom mounting Offers narrow width but high capacity Pull-out shelf & soft roller not supplied 376 (14 7 /8") 376 Waste Bin, floor-mounted For cabinet widths over 250 mm (9 3 /4") Capacity: 18 litres (4.75 gal.) Material: Lid: plastic Pail: plastic MINIMUM CABINET WIDTH white/light grey 502.61.713 199 (8") 450 (17 3 /4") Replacement Bin, 18 liter Material: plastic light grey 502.61.937 Text Change Replacement Bins for 502.73 series Material: plastic Capacity Cat.No. 15 [litre] brown 502.71.193 7 [litre] green 502.70.098 24 [litre] grey 502.73.599 923 Tension spring Pedal Strike Cabinet floor Front panel Extension shelf Strike 360-422 (14 3/16"-16 5/8") 260 (10 1/4") 415 (16 3/8") 370 (14 1/2") 501 (19 3/4") 512-574 (20 3/16"-22 5/8") Toekick 38 mm min. (1 1 /2") 395 (15 1/2") 495 (19 1/2") 800 mm min. (3 3 /16") Double Waste Bin, side wall-mounted, manual full extension For cabinet widths over 360 mm (14 3 /16") Adjustable inside width: 360-422 mm (14 3 /16" 16 5 MINIMUM /8") Capacity: 2 x 18 litres (4.75 gal.) Material: Frame: steel, epoxy-coated 6 Cover: plastic CABINET WIDTH Pails: plastic [white/light grey 502.73.780] Discontinued Quadruple Waste Bin, side wall-mounted, manual full extension For cabinet widths over 512 mm (20 3 /16") Adjustable inside width: 512-574 mm (20 3 /16" 22 5 /8") MINIMUM Capacity: 2 x 15 litres (4 gal.) 1 x 7 litres (1.75 gal.) 1 1 x 24 litres (6.25 gal.) Material: Frame: steel, epoxy-coated CABINET WIDTH Cover: plastic Pails: grey, green, light grey and brown [white 502.73.795] Discontinued w/ Stock Door opener, for waste bins mounted to pull-out shelf with door attached Material: Pedal: plastic Strike: steel Tension spring: steel wire brown 502.15.113

Waste Bins Pull-Out Door Mounted Designed to be removed from the cabinet while the lid remains inside for use as a shelf Bin is mounted to the inside of the cabinet, and incorporates its own runners with self-closing feature Bin fits into a standard 450 mm (17 3/4") or 500 mm (19 11/16") wide cabinet For cabinet thickness 15-20 mm (5/8"-13/16") with 5 mm (3/16") adjustability on either side For cabinet width 450 mm (17 3/4 ) Installation width min. 410 mm (16 1/8 ) Installation depth min. 528 mm (20 13/16 ) For cabinet width 450 mm (17 3/4 ) Euro-Cargo 45 and 50 waste bins Minimum installed depth: 528 mm (20 13/16") Minimum installed width: 410 mm (16 1/8") Capacity: 2 35 litres (9.25 gal.) bins Material: Lid & Bin Holder: steel, silver epoxy-coated Bins: plastic, light grey 450 mm (17 3/4") 502.73.921 500 mm (19 11/16") 502.73.932 MINIMUM CABINET WIDTH Note: Waste bin for 500 mm cabinet version includes space bracket. 546 (21 1/2 ) 410 (16 1/8 ) 528 (20 13/16 ) 560 (22 1/16 ) For cabinet width 600 mm (23 5/8 ) Installation width min. 560 mm (22 1/16 ) Installation depth min. 528 mm (20 13/16 ) 546 (21 1/2 ) 528 (20 13/16 ) For cabinet width 600 mm (23 5/8 ) New Item New Item Euro-Cargo 60 waste bin Minimum installed depth: 528 mm (20 3/4") 6 Minimum installed width: 560 mm (22") Capacity: 2 35 litres (9.25 gal.) bins 2 8.5 litres (2.25 gal.) bins Material: Lid & Bin Holder: steel, silver epoxy-coated Large bins: plastic, light grey Small bins: plastic, granite grey 502.73.943 Replacement Bin Material: plastic : light grey MINIMUM CABINET WIDTH Capacity 8.5 litres [502.70.930] 35 litres 502.73.992 Replacement Lid Material: plastic green 502.70.939 924

Waste Bins Pull-Out Door Mounted Both versions can be installed in face-frame, inset-door, and frameless door applications Inside cabinet area: 14 wide x 21 high Easy to install clip-on frame Sturdy metal lid, suitable as shelf, and seals in odor Smaller bin for bio-bin, dog/cat food bin, or plastic bags 130,000 cycle tested 533 mm (21") 502 mm (19 3/4") 300 (12") 356 mm (14") 572 mm (22 1/2") Cabinet depth Min. 533 mm (21") Double Waste Bin, US Cargo 15 Side wall mounted, manual full extension ball bearing overtravel slides. Capacity: 1 x 40 litres (10.57 gal.) 1 x 8.5 litres (2.25 gal.) Material: Frame: steel, powder-coated Cover: plastic Pails: plastic silver/light grey 502.74.212 502 mm (19 3/4") Both bins offer over 21 gallons of waste separation Inside cabinet area: 19 3/4 wide x 21 high 507 mm (20") 559 mm (22") 451 mm (17 3/4") 578 mm (22 3/4") Cabinet depth Min. 533 mm (21") Double Waste Bin, US Cargo 21 Side wall mounted, manual full extension ball bearing overtravel slides. Capacity: 2 x 40 litres (10.57 gal. x 2) Material: Frame: steel, powder-coated Cover: plastic Pails: plastic silver/light grey 502.74.252 Replacement Bin Material: plastic : light grey Capacity 925 New Item 8.5 litres [502.70.930] 40 litres 502.74.900 Replacement Lid Material: plastic New Item green 502.70.939 Attach cord to back hole in slide 70 (2 3/4") Door Opener, for US Cargos Mounted to pull out door for frameless cabinets Material: Pedal: plastic Strike: steel, black enameled Tension spring: black cord silver 502.15.220 (includes mounting hardware)

Towel Rack Pull-Out Can be mounted directly below the countertop, to side or back wall Non-slip pull-out towel bars can be pulled out with ease to a distance of 765 mm (30") Bars are prevented from twisting by the square-profiled retaining bar Towel rack, rail and 2 bars Installed width: 140 mm (5 1 / 2") 140 (5 1 /2") 85 (3 3 /8") 430 (17") 765 (30") Material: Mounting bracket and inner tube: steel, epoxy-coated Outer bar: plastic, ribbed (non-slip) white 510.06.725 190 (7 1 /2") 85 (3 3 /8") Towel rack, 3 bars Installed width: 190 mm (7 1 / 2") Material: Mounting bracket and inner tube: steel, epoxy-coated Outer bar: plastic, ribbed (non-slip) white 510.06.752 926

Towel Rack Pull-Out Length of mounting bracket: 399 mm (15 3/4") Length of extending rails: 430 mm (17") Installation length, extended bar lengths and installed heights of all three models are the same Undermount or side-mounted H Towel Rack, 2 bars, extendable Installed dimensions: (w) x (h) Under-mount: 65 x 73 mm (2 1 /2" x 3") Side-mount: 91 x 38 mm (3 5 /8" x 1 1 /2") W W H Material: aluminum anodized or epoxy-coated chrome polished 510.54.221 silver anodized 510.54.921 (includes 3 precision plastic rollers & plastic end caps) 927 Installedlength 460 (18 1/8") Extendedlength 285 (11 1 /4") Towel Rack, 3 bars, extendable Installed dimensions: (w) x (h) Under-mount: 125 x 73 mm (5" x 3") Side-mount: 152 x 38 mm (6" x 1 1 /2") Material: aluminum anodized or epoxy-coated chrome polished 510.54.232 silver anodized 510.54.932 (includes 3 precision plastic rollers & plastic end caps)

Kitchenware & Plate Organizer Customize drawer with any combination of beech posts and dividers Posts mount into pre-drilled holes and are secured with fastening nut Base plate can be field cut to size Divider and Knife holder set press-fit into pre-drilled holes by dowel 32 (1 1/4") A 25 (1") 25 (1") 160 (6 5/16") 160 (6 5/16") B Post Plate Locking Nut Base plate Height: 10 mm (3/8 ) Material: veneer, beech A x B 533 (21 ) x 610 (24 ) 557.46.001 914 (36 ) x 610 (24 ) 557.46.000 Post, round Material: beech 557.46.010 Packing: 1 set (4 pcs., includes mounting hardware and locking nut) Post, triangle Material: beech 557.46.011 Packing: 1 set (4 pcs., includes mounting hardware and locking nut) 609 (24") 190 (7 1/2") 120 (4 3/4") 15 (5/8") 40 (1 9/16") 45 (1 3/4") 174 (6 7/8") 384 (15 1/8") 446 (17 5/8") 120 (4 3/4") 78 (3 1/16") 15 (5/8") 32 (1 1/4") 64 (2 1/2 ) 288 (11 3/8") 80 (3 1/8") 30 (1 1/16") 15 (5/8 ) 45 (1 3/4") 120 (4 3/4") 15 (5/8") 174 (6 7/8") 174 (6 7/8 ) 64 (2 1/2 ) 96 (3 3/4") 126 (5") 120 (4 3/4") 15 (5/8") 64 (2 1/2") 96 (3 3/4") 20 (3/4 ) Deep Drawer Dividers Material: beech Dimensions 609 (24 ) x 120 (4 3/4 ) x 15 (5/8 ) 557.46.043 446 (17 5/8 ) x 120 (4 3/4 ) x 15 (5/8 ) 557.46.042 190 (7 1/2 ) x 120 (4 3/4 ) x 15 (5/8 ) 557.46.041 126 (5 ) x 120 (4 3/4 ) x 15 (5/8 ) 557.46.040 (includes locking nuts) Utensil divider, press-fit, short Material: beech Packing: 1 set (4 pcs.) 557.46.020 Utensil divider, press-fit, long Material: beech 557.46.021 Packing: 1 set (4 pcs.) Knife holder set, press-fit Material: beech 557.46.030 Packing: 1 set (includes knife block and knife stop) 928

Drawer Inserts Cutlery Tray & Spice Drawer Insert Can be trimmed to fit drawer For drawer inside depths from 457 mm (18") to 540 mm (21 1 / 4") For drawer inside widths from 184 mm (7 1 / 4") to 552 mm (21 3 / 4") Cutlery Trays 1 2 7 1 /4-9 3 /4 9 1 /4-11 3 /4 184-248 mm 235-298 mm 5 6 7 15 1 /4-17 3 /4 387-451 mm Cutlery Trays with large compartments 17 1 /4-19 3 /4 438-502 mm 3 4 11 1 /4-13 3 /4 286-349 mm 19 1 /4-21 3 /4 489-552 mm 13 1 /4-15 3 /4 337-400 mm 18"-21 1/4" 457-540 Material thickness: 2 mm Height: 57 mm (2 1 / 4") Depth: 540 mm (21 1 / 4") to 457 mm (18") Material: plastic Size cabinet width min. max. white gloss mm (inch) mm (inch) 1 184 (7 1 / 4) 248 (9 3 / 4) 556.61.710 2 235 (9 1 / 4) 298 (11 3 / 4) 556.61.720 3 286 (11 1 / 4) 349 (13 3 / 4) 556.61.730 4 337 (13 1 / 4) 400 (15 3 / 4) 556.61.740 5 387 (15 1 / 4) 451 (17 3 / 4) 556.61.750 6 438 (17 1 / 4) 502 (19 3 / 4) 556.61.760 7 489 (19 1 / 4) 552 (21 3 / 4) 556.61.770 1 11 1 /4-13 3 /4 286-349 mm Spice Drawer Insert 929 2 13 1 /4-15 3 /4 337-400 mm 3 15 1 /4-17 3 /4 387-451 mm Can be trimmed to fit drawers up to 1300 mm (51 1 / 8") 4 19 1 /4-21 3 /4 489-552 mm 18"-21 1/4" 457-540 Material thickness: 2 mm Height: 57 mm (2 1 / 4") Depth: 540 mm (21 1 / 4") to 457 mm (18") Material: plastic Size cabinet width min. max. white gloss mm (inch) mm (inch) 1 286 (11 1 / 4) 349 (13 3 / 4) 556.64.730 2 337 (13 1 / 4) 400 (15 3 / 4) 556.64.740 3 387 (15 1 / 4) 451 (17 3 / 4) 556.64.750 4 489 (19 1 / 4) 552 (21 3 / 4) 556.64.770 For storage of average sized spice jars. A minimum inside drawer height of 3 1 / 4" is required. 1300 x 550 mm (51 1 / 8 x 21 5 / 8") Material thickness: 3 mm Material: plastic white gloss 556.79.706 silver 556.79.506 maple 556.79.306

Drawer Inserts Trimmable The top tier slides easily on ball-bearing slides back into the cabinet allowing easy access to the bottom tier The top tier lifts out for easy cleaning Can be trimmed to fit drawers Double Cutlery Tray, with removable top tier Material thickness: 3 mm ( 1 /8") Height: 78 mm (3 1 /8") Material: plastic Size Width Depth white gloss minimum maximum minimum maximum 1 290 (11 1 /2") 340 (13 3 /8") 435 (17 1 /8") 500 (19 3 /4") 556.68.730 2 350 (13 7 /8") 390 (15 3 /8") 435 (17 1 /8") 500 (19 3 /4") 556.68.749 3 390 (15 3 /8") 440 (17 1 /4") 435 (17 1 /8") 500 (19 3 /4") 556.68.758 4 440 (17 1 /4") 490 (19 1 /4") 435 (17 1 /8") 500 (19 3 /4") 556.68.767 5 490 (19 1 /4") 540 (21 1 /4") 435 (17 1 /8") 500 (19 3 /4") 556.68.776 Top Tier 423 Bottom Tier 500 435 290 340 263 350 390 313 1 2 363 413 463 390 440 3 4 5 440 490 490 540 930

Cutlery Tray Inserts With Wood Organization Pieces Can be trimmed to fit drawer Choose wood inserts from page 932 to customize organization Text Change Cutlery Trays For drawer depth: 490 540 mm (19 1 / 4 21 1 / 4 ) For drawer Height: 50 mm (2") Material thickness: 2.5 mm ( 3 / 32") Material: plastic For cabinet width (Face Frame) Width of tray maple silver grey textured [A 15 200 300 mm (8 12 ) 556.53.400 556.53.510 [B 18 300 400 mm (12 16 ) 556.53.401 556.53.511 [C] 21 350 450 mm (14 18 ) 556.53.402 556.53.512 [D] 24 400 500 mm (16 20 ) 556.53.403 556.53.513 [E] 24 450 550 mm (18 22 ) 556.53.404 556.53.514 [F] 27 500 600 mm (20 24 ) 556.53.405 556.53.515 [G] 30 600 700 mm (24 28 ) 556.53.406 556.53.516 [H] 33 700 800 mm (28 32 ) 556.53.407 556.53.517 [I] 39 800 900 mm (32 36 ) 556.53.408 556.53.518 [J] 42 900 1000 mm (36 40 ) 556.53.409 556.53.519 A B C D E F 490-540 200-300 (8-12") 300-400 (12-16") 350-450 (14-18") 400-500 (16-20") 450-550 (18-22") 500-600 (20-24") G H I 600-700 (24-28") J 900-1000 (36-40") 700-800 (28-32") 800-900 (32-36") Image Change 931

Wood Organization Pieces For Cutlery Tray Inserts For use with inserts on page 931 Use numbering system to determine placement of wood pieces Container Holder For spices or jars with diameters up to 55 mm (2 1 /8 ) Cut-out diameter: 57 mm (2 1 / 4 ) Material: maple, varnished # of cut-outs 5 556.53.331 10 556.53.332 Knife Block, holds 4 knives Material: maple, varnished K 556.53.330 Image Change Text Jar [with wooden lid] Change Diameter: 55 mm (2 1 / 8 ) at base, 61 mm (2 3 / 8 ) at top Height: 58 mm (2 1 / 4 ) with lid, 50 mm (2 ) without lid Text Material: [Jar:] glass, clear Change [Lid: beech, varnished with rubber sealing ring] 543.95.100 Sample Configurations Divider, self-adhesive Material: maple, varnished 1 For Horizontal 90 x 44 x 10 556.53.339 (3 9 / 16 x 1 3 / 4 x 3 / 8 ) 2 For Vertical 100 x 44 x 10 556.53.100 (3 15 / 16 x 1 3 / 4 x 3 / 8 ) A B B C C D 490-540 200-300 (8-12") E 600-700 (24-28") 300-400 (12-16") 350-450 (14-18") F 700-800 (28-32") 400-500 (16-20") 450-550 (18-22") G 800-900 (32-36") 500-600 (20-24") Image Change H 900-1000 (36-40") 932

Drawer Inserts Trimmable Made from superior quality 9-ply birch Clear finish provides a durable, scratch-resistant surface Easily trimmable in widths up to 50 mm (2") 75 mm (3") strips are easily trimmable for depth adjustment Stylish side profile 8 mm ( 3 /8") base provides a sturdy bottom 75 (3") 470 (18 1/2") 50 (2") 50 (2") 50 (2") Cutlery Tray Material: plywood, birch 290-340 (11 3/8"-13 3/8") 366-416 (14 3/8"-16 3/8") 442-492 (17 3/8"-19 3/8") Length Width Height min max min max 470 (18 1 /2") 545 (21 1 /2") 290 (11 3 /8") 340 (13 3 /8") 74 (3") 556.93.301 470 (18 1 /2") 545 (21 1 /2") 366 (14 3 /8") 416 (16 3 /8") 74 (3") 556.93.302 470 (18 1 /2") 545 (21 1 /2") 442 (17 3 /8") 492 (19 3 /8") 74 (3") 556.93.303 75 (3") 153 (6") 470 (18 1/2") Accessory Tray Material: plywood, birch Length Width Height min max 470 (18 1 /2") 545 (21 1 /2") 153 (6") 74 (3") 556.93.311 933 Knife Block Holds up to 4 knives Chrome rods position handles high so blades stay in place Easily trimmable for depth adjustments Material: plywood, birch Length Width Height 545 (21 1 /2") 153 (6") 74 (3") 556.93.321 Spice Tray Holds up to 12 spice jars Easily trimmable for depth adjustments Material: plywood, birch Length Width Height 545 (21 1 /2") 153 (6") 74 (3") 556.93.331

Drawer Inserts Mix and match to create customized organization Use non-slip shelf liner mats for oversize utensil storage (see page 937) Apply rubber bumpers to base to avoid shifting (see page 489) Optional spacer strips are available for a custom fit Strips fit between side or back of drawer box and tray Sample Configurations The series of natural beech drawer inserts found on pages 935 936 are designed to provide flexibility in accommodating various drawer widths. Below are some examples of the wide variety of configurations possible to maximize the beauty and functionality of your drawers. 30" Base Cabinet Drawer Examples 367 (14 1/2") 367 (14 1/2") 443 (17 1/2") 291 (11 1/2") 36" Base Cabinet Drawer Examples Non-slip shelf liner Spacer Strips 519 (20 1/2") 200 (8") Strip for depth adjustment Strip for width adjustment 100 (4") 934

Drawer Inserts Dividers are flared into the bottom of the tray Solid wood, fully assembled 4 mm beech ply base 291 (11 1/2") 367 (14 1/2") 443 (17 1/2") 495 (19 1/2") Cutlery Tray Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 291 (11 1 /2") 50 (2") 556.91.301 495 (19 1 /2") 367 (14 1 /2") 50 (2") 556.91.302 495 (19 1 /2") 443 (17 1 /2") 50 (2") 556.91.303 495 (19 1 /2") 519 (20 1 /2") 50 (2") 556.91.304 519 (20 1/2") Unique groove for knife handles prevents shifting Stores 6 knives Mix and match to create customized organization 495 (19 1/2") 367 (14 1/2") 519 (20 1/2") Cutlery Tray with Knife Block Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 367 (14 1 /2") 50 (2") 556.91.311 495 (19 1 /2") 519 (20 1 /2") 50 (2") 556.91.312 Free standing Easily trimmable up to 13 mm (1/2") on each side Stores 6 knives Optional spacer strips are available for a custom fit Easy to cut down for minor depth or width adjustments 935 Knife Block Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 195 (7 3 /4") 50 (2") 556.91.310 Spacer Strips Material: beech, unsteamed Length x Width x Height 600 (24") 6 ( 5 /8") 52 (2 1 /16") 556.92.340 1200 (48") 6 ( 5 /8") 52 (2 1 /16") 556.92.341

Drawer Inserts Insert the container holder and canisters for a complete set Open Tray Material: beech, unsteamed Length x Width x Height 495 (19 1 /2") 100 (4") 50 (2") 556.91.321 Holder fits into the open tray Order containers separately Mix and match to create customized organization Container Holder Dimensions: (L x W x H) 464 (18 1 /4") x 69 (2 3 /4") x 40 (1 5 /16") Material: veneer beech 556.92.300 brushed aluminum 556.92.310 Stainless steel set has lids for dispensing spices Wooden lids include a rubber grommet for a tight fitting seal Containers fit into the container holder for secure storage Containers Dimensions: Ø 60 mm (2 3 /8") x 60 mm (2 3 /8") stainless steel with lids 556.92.030 glass with wooden lids 556.92.320 Packing: Set of 4 936

Hailo Kitty New Item Functional, attractive design Suitable as a storage container, compost collector, or utensil tray Use in the sink as a pull-out, or on the countertop Dimensions: (W x D x H) 250 (9 7 /8") x 160 (6 1 /4") x 170 (6 3 /4") Material: plastic grey 540.35.700 936 A

Mats Cut-to-size to fit in sink cabinet Unique dimples collect water or other liquids to prevent damage to cabinet Dimples can collect up to 6 liters of water per square meter Under-sink Mat 6 (1/4") 625 (24 5/8") 6 (1/4") 1150 (45 1/2") Material: Polystyrene white 547.91.703 grey, stainless 547.91.550 (625 x 1150 mm (24 5/8" x 45 1/2") Cut-to-size non-slip mats prevent sliding or movement of items on pull-out shelves, revolving shelves, drawers, etc. Available in an assortment of colours Translucent mat is ideal for glass applications as the surface remains visible but protected, offering slip resistance and noise prevention For use as a mat or shelf protector Manageable roll size Non-slip Mat High quality, acoustic, and slip resistant 937 Non Slip Material: synthetic rubber with non-slip surface white 547.90.710 Packing: 1 roll (1.5 x 10 m (59 x 32 8 ) Material: synthetic rubber with non-slip surface white 547.90.761 translucent 547.90.491 silver 547.90.901 grey 547.90.521 driftwood 547.90.411 Packing: 1 roll (600 x 1500 mm (23 1 2" x 59")

Drawer Inserts Silverware Drawer Kit Assembly instructions: 1. Line the drawer base with self-adhesive felt. 2. Mount the holders (silverware must lie at right angle to drawer movement). 3. Knife holders: adjoining knives must always face in opposite directions (see photo below). Kitchen and Bath Organization Felt cloth, non-tarnish, self-adhesive Holders - Self-adhesive For lining the drawer bottom Material: felt green 891.22.000 brown 891.22.100 maroon 891.22.110 Packing: 1 roll (584 x 914 mm (23" x 36") 891.21.120 example shown here A B C D 3/4" 1 1/8" 1 1/8" 5 3/8" 4 5/8" 2 1/2" 1 1/4" 5/8" 1 1/4" 1 1/4" 1 3/8" 1 3/8" Specifications A B C D Set consists of: 2 3 2 brown For: 12 knives 12 forks 2 large items 891.21.111 50 pieces 12 spoons 12 teaspoons Set consists of: 2 4 1 4 For: 12 knives 16 forks 6 small items 4 large items 891.21.120 70 pieces 16 spoons 16 teaspoons Set consists of: 4 5 6 For: 24 knives 20 forks 6 large items 891.21.139 90 pieces 20 spoons 20 teaspoons 938

Kitchen Cabinet Accessories 550 (21 5 /8") 600/900 (23 5 /8"/35 1 /2") 40 (1 9 /16") Extending oven rack, with integrated safety rail at front and rear. For installation under range tops or in open areas between two cabinets. wire Guide: galvanized steel Guide cover: stainless steel Installed width mm (inch) chrome-plated 600 (23 5 / 8") 545.39.212 900 (35 1 / 2") 545.39.221 (includes guides and covers) Bottle Caddy, 8 bottle capacity Stands on floor of storage drawer within wire fence. Dimensions: 225 x 410 x 297 mm (8 7 /8" x 16 1 /8" x 11 5 /8") chrome-plated 545.45.229 Baking rack support Screw-mounted to cabinet base. Dimensions: 75 x 300 x 250 mm (3" x 12" x 10") chrome-plated 540.42.200 Wire fence for bottle caddy Screw-mounted to drawer base. Dimensions: 240 x 430 x 40 mm (9 3 /8" x 17" x 1 1 /2") chrome-plated 545.45.238 939

Shelf Standard System With special clip-on accessories Provides storage space for cleaning supplies and equipment such as vacuum cleaner accessories With an installation width of only 315 mm (12 3 /8") or 415 mm (18 5 /16"), this space saving system can be mounted on cabinet side panels or doors The layout can be rearranged at any time The specified installation width of the system is measured at the outside edges of the supporting standards 315 (12 3/8") or 415 (18 5/16") 25 (1") 67 (2 5/8") 50 (2") 50 (2") 500 (19 11/16") Slotted Standards, accept individual accessories screw-mounted Length: 1500 mm (59"), epoxy-coated sliver 520.80.207 950 (37 3/8") Insert the keyhole fasteners and press down securely to lock. Wire basket, clip-on wire Width x Depth x Height chrome-plated 300 x 75 x 75 (11 13 / 16" x 2 15 / 16" x 2 15 / 16") 520.81.213 400 x 75 x 75 (15 3 / 4" x 2 15 / 16" x 2 15 / 16") 520.81.231 Wire basket, clip-on wire Width x Depth x Height chrome-plated 300 x 200 x 75 (11 13 / 16" x 7 7 / 8" x 2 15 / 16") 520.81.222 400 x 200 x 75 (15 3 / 4" x 7 7 / 8" x 2 15 / 16") 520.81.240 Hook rail, clip-on wire Width x Depth x Height chrome-plated 300 x 52 x 33 (11 13 / 16" x 2 1 / 16" x 1 5 / 16") 520.82.229 400 x 52 x 33 (15 3 / 4" x 2 1 / 16" x 1 5 / 16") 520.82.238 940

Cabinet Accessories Multi-purpose basket, three-sided With screw-mounting eyes wire Width x Depth x Height chrome-plated 312 x 101 x 112 mm 540.36.207 (12 1 /4" x 4" x 4 1 /2") Door basket Screw-mounted, with plexi-glass liner wire Width x Depth x Height chrome-plated 260 x 90 x 63 mm 543.21.229 (10 1 /4" x 3 1 /2" x 2 1 /2") Hookrail with five hooks Screw-mounted to side panels wire Width x Depth x Height chrome-plated 350 x 29 x 55 mm 520.04.207 (13 3 /4" x 1 1 /4" x 2 1 /4") Hookrail with five hooks Screw-mounted to underside of wall unit wire Width x Depth x Height chrome-plated 350 x 30 x 54 mm 520.04.252 (13 3 /4" x 1 1 /4" x 2 1 /8") 941

Cabinet Accessories Kitchen roll holder, under cabinet screw-mounted wire Width x Depth x Height chrome-plated 300 x 135 x 165 mm 521.06.206 Wine rack, screw-mounted to side panel of cabinet Capacity: 15 bottles Width x Depth x Height chrome-plated 260 x 185 x 624 mm 541.92.200 (10 1 / 4" x 7 1 / 4" x 24 9 / 16") 630 195 260 Wine rack shown in reduced depth cabinet Wine rack Designed to hold 15 bottles Fits into a standard 300 mm wide cabinet with reduced depth Can also be attached to a shelf for pulling out of a wider cabinet with hinged or fixed door panel chrome-plated 541.94.200 942

Cabinet Accessories New Item Wine glass rack, for mounting in wall mounted cabinets Mounting clips included Cabinet Glass Clips width columns required Width chrome-plated 150 mm 1 2 100 mm 544.10.200 300 mm 2 2 220 mm 544.10.202 400 mm 3 4 340 mm 544.10.203 500 mm 4 4 460 mm 544.10.204 942 A Wine glass rack, for mounting in base mounted cabinets Mounting clips included Cabinet Glass Clips width columns required Width chrome-plated 150 mm 1 2 100 mm 544.10.210 300 mm 2 2 220 mm 544.10.212 400 mm 3 4 340 mm 544.10.213 500 mm 4 4 460 mm 544.10.214

Folding Step Stool Stepfix can be hung on a side panel using the optional hanging bracket Stepfix is a sturdy, steel, compact folding step stool for kitchen use Non-slip rubber mat Safety spring and smooth folding mechanism Stepfix has four built in rollers permitting it to slide in/out with ease under cabinets when used with optional toekick bracket Weight capacity 150 kg (330 lbs) 95 (3 3 /4") 465 (18 3 /8") 385 (15 1 /8") 405 (16") 390 (15 3 /8") 390 (15 3 /8") Step stool With 2 steps 200 x 300 mm (7 3 / 4 x 11 3 / 4") covered with non-slip rubber treads., epoxy-coated Feet: plastic silver/black 505.04.210 white/grey 505.04.704 943 Toekick bracket Attaches to step stool and toekick. Use to slide under cabinet. A minimum of 100 mm (4") is required. galvanized 505.04.419 Hanging bracket Screw-mounts to cabinet side panel to stow step stool. Length: 140 mm (5 1 / 2") Depth: 30 mm (1 1 / 8") Height: 35 mm (1 3 / 8"), epoxy-coated white 505.04.722

Cabinet Accessories Broomstick holder, screw-mounted, galvanized; Rollers: rubber Width x Depth x Height bright 51 x 40 x 50 mm 520.10.009 Packing: 10 pcs. Ultrahold Dimensions: 18" (4 hooks) and 36" (8 hooks) length Use in kitchen pantry, garage, workshop, office, storage room. Aluminum rail Will not rust Non-slip covering on hooks Will virtually hold anything Adjustable sliding clamp May be removed from rail and fastened independently to wall. Each clamp holds up to 20 lbs. Material: Rail: aluminum, anodized Clip: steel Length 18" 888.00.015 36" 888.00.024 Broomstick holder Bottle holder grommets With four holders, for concealed screw-mounting Material: Housing: plastic Hooks: steel, nickel-plated, rubber-coated Width x Depth x Height white 318 x 27 x 75 mm 520.44.700 (includes mounting hardware) For insertion in round opening Height to lower edge: 24 mm Material: plastic Aperture Packing Ø95 mm black 520.39.611 10 pcs. Ø105 mm white 520.39.728 25 pcs. black 520.39.620 10 pcs. 944

Cabinet Spice Racks Spice rack With screw-mounting eyes wire Width x Depth x Height No.of shelves chrome-plated 244 x 66 x 395 mm 4 543.19.260 (9 5 / 8" x 2 5 / 8" x 15 9 / 16") 391 x 66 x 395 mm 4 543.19.280 (15 3 / 8" x 2 5 / 8" x 15 9 / 16") 530 x 66 x 274 mm 3 543.19.250 (20 7 / 8" x 2 5 / 8" x 10 3 / 4") 945

Storage Systems For Upper Cabinets Cabinet storage systems to be built into narrow cabinets Minimum installation dimensions: Inside width 262 mm (10 1 / 2") Inside depth 280 mm (11") Inside height when using the follower fitting: 420 mm (16 1 / 2") or 630 mm (24 3 / 4") Larger dimensions can be made to work by cutting the 16 mm ( 5 / 8") or 19 mm ( 3 / 4") thick back panel as desired The follower fitting connects the movable back panel For left hand or right hand doors Door or pull-out shelf can be used alone or combined Opening the cabinet door makes the pull-out shelves slide-out Door-mounted shelves Can be screw-mounted on the inside of the cabinet door Width: 210 mm (8 1 / 4") Depth: 90 mm (3 1 / 2") Height: 570 mm (22 7 / 16") Liners: textured metal chrome-plated 543.23.214 (includes 3 shelves and installation instructions) Pull-out shelves Can be screw-mounted onto a 2-part (movable) back panel Width: 255 mm (10 1 / 32") Depth: 155 mm (6 1 / 8") Height: 570 mm (22 7 / 16") Liners: textured metal chrome-plated 543.23.223 (includes 3 shelves and installation instructions) Follower fitting For the pull-out shelves With welded angle brackets for mounting onto the rear panel Material: Visible parts: steel Guide runners: steel Front cover for guides: plastic chrome-plated 543.23.297 Packing: 1 set (includes installation instructions) 946

Revolving Shelf Fitting Systems When the cabinet door is opened the revolving shelf slides forward for easy access Clear shelves allow items in upper units to be seen Suitable for narrow cabinets 268 mm (10 1 / 2") wide with an inside depth of min. 250 mm (9 7 / 8") Allows easy removal of smaller items For use in kitchen or bath 262-268 (10 5 /16"-10 9 /16") 250 (9 7 /8") Revolving Shelf, Ø 235 (9 1/4 ) Material: Shelf: plastic Fence: steel white/chrome-plated 547.54.700 A Revolving Shelf, Ø 235 (9 1/4 ) Material: Shelf: plastic Fence: steel clear/chrome-plated 547.54.406 The revolving shelves are supplied complete with bearing disc and securing pin made of steel, bright galvanized 947 Posts for revolving shelves Upper bearing sleeve: plastic Post length Installed length For shelf chrome-plated/ mm (inch) A mm (inch) number white 560 (22") 596 (23 1 /2") 2 547.53.212 785 (31") 820 (32 1 /4") 3 547.53.221 860 (33 7 /8") 896 (35 1 /4") 3 547.53.230 1185 (46 5 /8") 1221 (48") 5 547.53.249 Pull-Out Fitting for Revolving Shelf Unit Includes: upper and lower runner, with all accessories Material: Runners: steel, galvanized Cover: steel, epoxy-coated white, RAL 9010 547.53.703 Packing: 1 set (includes upper and lower runner with accessories) Installed height = inside cabinet height less 34 mm. If necessary, the axle can be shortened appropriately for shorter height.

Swivel Panel A unique storage system for kitchens, bathrooms, and living areas An organizational solution for under-utilized corner space Functions as a room divider Double functionality with 5 semi-circular wire baskets vertically attached to a pole and backed by a panel of your choice (customer supplied) Attach our Backsplash Railing System (see pages 953 956) to the other side of the panel or simply add a mirror, magnetic message board, etc 400mm (15 3/4") Bio-Fix products from Häfele. Min. 120 mm (4 3/4") Max. 10 kg (22 lbs.) Max. 2380 mm (93 3/4") Pole Ø 50 mm (2") Length: 2600 mm (102 3 8 ) -plated chrome polished 815.00.204 750-800 mm (29 1/2" - 31 1/2") Min. 120 mm (4 3/4") Floor Basket set Dimensions: 420 x 750 mm (16 1 2" x 25 1 2") -plated chrome-polished 815.04.230 Packing: 1 set (includes 5 wire baskets, top wall bracket and bottom bearing, top trim cap) 948

Kitchen Rail System Individual pieces can be ordered separately on pages 950 951 Installed along the front of the countertop Installed on top of the countertop Wall-mounted Tubular Rail Set, 16 mm ( 5 8 ) diameter Flat end cap chrome polished 522.05.231 nickel matt 522.05.633 Packing: 1 set (includes 1500 mm tube, end caps, (4) posts, (4) S-hooks, (4) adapters and dowel connector) Tubular rail, 16 mm (5/8 ) diameter Length: 1500 mm gold polished 522.00.035 nickel-plated matt 522.00.630 chrome-plated polished 522.00.236 85 Ø16 26 51 26 51 Countertop edge Ø13 Tubular rail, 16 mm (5/8 ) diameter gold polished 522.01.019 nickel-plated matt 522.01.617 chrome-plated polished 522.01.215 ø25 52 949 31 ø13.2 Decorative end-cap, with profile-style head plugs into kitchen rails. Material: brass nickel-plated matt 522.03.639 chrome-plated polished 522.03.237 gold coloured matt 522.03.530 Ø16 69 26 85 53 1 1 26 69 Countertop edge 53 Ø13 Recess to seat end of tube The recess which accommodates the end cap ensures a neatly concealed joint for decorative end-caps Tubular rail, 16 mm (5/8 ) diameter gold polished 522.01.028 nickel-plated matt 522.01.626 chrome-plated polished 522.01.224 47 Decorative end-cap, with flat head plugs into kitchen rails. Material: brass gold polished 522.03.022 nickel-plated matt 522.03.620 chrome-plated polished 522.03.228 45 ø18 ø13.2

Kitchen Rail System Ø16.2 M4 internal thread 46 (1 7 /8") 26 Ø8 Ø14 50 Ø 8 15 Railing posts Press-fits over fastening screw (included), with M4 set screw and hex key to secure rail Material: zinc gold polished 522.02.016 nickel-plated matt 522.02.614 chrome-plated polished 522.02.212 39 ø13.2 Dowel connector Plugs into kitchen rails and elbow sections Material: plastic white 520.72.090 Packing: 2 pcs. R 20 Ø4.5 Ø20 2 Adapter Fits front of countertops edges (R = 20) Material: zinc nickel-plated matt 522.02.687 chrome-plated polished 522.02.285 27 (1 1/16") 55 (2 3/16") Mounting diagram Dowel Connector S-hooks, for railing gold polished 522.04.001 nickel-plated matt 522.04.609 chrome-plated polished 522.04.207 brass-polished 522.04.805 Packing: 4 pcs. Rail posts set screws to secure rails and posts Fastening screw 2.5 mm dia. hole adapters to fit the front of round-countertop edges 950

Kitchen Rail System Stainless Steel Mounting diagram Dowel Connector Rail posts set screws to secure rails and posts Fastening screw 2.5 mm dia. hole Ø16 1500 (59") Tubular rail, 16 mm (5/8") dia. Length: 1500 mm (59"), seamless tubing Material: stainless steel matt 522.40.015 Ø13 Ø13 93 93 Elbow Section 90, 16 mm (5/8") dia. seamless tubing Material: stainless steel matt 522.41.010 Ø16 Ø13 68 R20 Elbow Section 135, 16 mm (5/8") dia. Material: stainless steel matt 522.41.020 135 68 Ø16 951 M4 internal thread Ø18 4.5 Ø16.3 1.5 42 39 22 8 Ø14 23 47 Ø13.5 ø13.2 Railing post, for tubular rail 16 mm (5/8") dia. Press fits over fastening screw (included) with M4 set screw and hex key to secure rail. Material: stainless steel matt 522.42.000 Decorative end cap, with flat head Plugs in tubular rail 16 mm (5/8") dia. Material: stainless steel with plastic sleeve matt 522.42.050 Dowel connector Plugs into kitchen rail and elbow sections Material: plastic white 520.72.090 Packing: 2 pcs.

Midway Railing System Hanging Shelf, shallow 195 Discontinued chrome-plated polished 522.19.282 294 117 Discontinued Hanging Shelf, deep chrome-plated polished 522.19.283 195 242 294 Hanging Shelf 115 chrome-plated polished 522.37.290 160 260 Hanging Shelf, 2 tier 250 152 262 chrome-plated polished 522.36.200 952

Backsplash Railing System Easy to clean rail with concealed screw attachment Individual components can be positioned separately Rail Material: Mounting rail: plastic, grey Cover: aluminum, stainless steel material Length 600 mm (23 5 /8") 521.60.606 900 mm (35 1 /2") 521.60.609 1200 mm (47 1 /4") 521.60.612 1500 mm (59 1 /16") 521.60.615 Material: Mounting rail: plastic, grey Cover: aluminum Length 600 mm (23 5 /8") 521.60.406 900 mm (35 1 /2") 521.60.409 1200 mm (47 1 /4") 521.60.412 1500 mm (59 1 /16") 521.60.415 Packing: 1 set (including fastening material) Multi-purpose Shelf Dimensions: 440 x 150 x 275 mm (17 3 8" x 6" x 10 7 8"), plated : Support rails/shelf polished chrome/aluminum 521.61.220 chrome matt/aluminum 521.61.420 nickel matt/stainless steel 521.61.620 953 Paper Towel Holder, for junior rolls only Dimensions: 352 x 150 x 255 mm (13 7 8" x 6" x 10"), plated polished chrome 521.61.211 chrome matt 521.61.411 nickel matt 521.61.611 Paper Towel/Kitchen Wrap Holder, with serrated edges on both lower holders (for aluminum foil, grease-papers, cling wrap, etc) Paper towel holder holds junior rolls only Dimensions: 352 x 150 x 305 mm (13 7 8" x 6" x 12"), plated : Support rails/cutter cover polished chrome/aluminum 521.61.210 chrome matt/aluminum 521.61.410 nickel matt/stainless steel 521.61.610 Dimensions listed are width x depth x height

Backsplash Railing System Spice Rack, with 2 shelves For spice jars up to 59 mm (2 3 8") in diameter, and 110 mm (4 3 8") tall Dimensions: 380 x 80 x 275 mm (15 x 3 1 8 x 10 7 8"), plated : Support rails/shelves polished chrome/aluminum 521.61.225 chrome matt/aluminum 521.61.425 nickel matt/stainless steel 521.61.625 Lid Holder Holds 2 pan lids Dimensions: 115 x 80 x 255 mm (4 1 2 x 3 1 8 x 10"), plated polished chrome 521.61.230 chrome matt 521.61.430 nickel matt 521.61.630 Filter Holder Organizes coffee filters Dimensions: 195 x 80 x 290 mm (7 5 8 x 3 1 8 x 11 1 2"), plated polished chrome 521.61.231 chrome matt 521.61.431 nickel matt 521.61.631 Knife Holder, for 8 knives Dimensions: 380 x 80 x 255 mm (15 x 3 1 8 x 10"), plated : Support rails/knife holders polished chrome/aluminum 521.61.234 chrome matt/aluminum 521.61.434 nickel matt/stainless steel 521.61.634 Knife Holder, for 8 knives Dimensions: 380 x 80 x 255 mm (15 x 3 1 8 x 10"), plated Wood block: beech : Support rails polished chrome 521.61.233 chrome matt 521.61.433 nickel matt 521.61.633 954

Backsplash Railing System Wine Bottle and Glass Shelf, for 3 bottles Holds up to 3 wine bottles and 4 glasses Dimensions: 380 x 190 x 275 mm (15" x 7 1 / 2" x 10 7 / 8"), plated : Support rails/shelves polished chrome/aluminum 521.61.226 chrome matt/aluminum 521.61.426 nickel matt/stainless steel 521.61.626 Utensil Holder, with 1 compartment Dimensions: 147 x 150 x 335 mm (5 7 / 8" x 6" x 13 1 / 8"), plated : Support rails/canister polished chrome/aluminum 521.61.235 chrome matt/aluminum 521.61.435 nickel matt/stainless steel 521.61.635 Utensil Holder, with 3 compartments Dimensions: 380 x 150 x 370 mm (15" x 6" x 14 1 / 2"), plated : Support rails/canisters polished chrome/aluminum 521.61.236 chrome matt/aluminum 521.61.436 matt/stainless steel 521.61.636 955 Plate/Utensil Holder Holds up to 4 plates, with 1 compartment Dimensions: 440 x 150 x 370 mm (17 3 / 8" x 6" x 14 1 / 2"), plated : Support rails/canister polished chrome/aluminum 521.61.237 chrome matt/aluminum 521.61.437 nickel matt/stainless steel 521.61.637 Plate Holder Holds up to 12, 250 mm (10") plates Max. thickness 23 mm ( 7 / 8") Dimensions: 380 x 190 x 255 mm (15" x 7 1 / 2" x 10"), plated polished chrome 521.61.232 chrome matt 521.61.432 nickel matt 521.61.632

Backsplash Railing System Cleaning Supplies Rack Utility organizer for cleaning supplies and kitchen cloths Dimensions: 501 x 150 x 275 mm (19 7 / 8" x 6" x 10 7 / 8"), plated : Support rails/shelf polished chrome/aluminum 521.61.239 chrome matt/aluminum 521.61.439 nickel matt/stainless steel 521.61.639 Towel Rail Length: 570 mm (22 3 / 8"), plated polished chrome 521.61.201 chrome matt 521.61.401 nickel matt 521.61.601 Rail, with 6 hooks Length: 380 mm (15"), plated polished chrome 521.61.200 chrome matt 521.61.400 nickel matt 521.61.600 Cookbook Holder Dimensions: 440 x 47 x 320 mm (17 3 / 8"x 1 7 / 8" x 12 1 / 2"), plated : Support rails/shelf polished chrome/aluminum 521.61.227 chrome matt/aluminum 521.61.427 nickel matt/stainless steel 521.61.627 Memo Pad Holder Holds 1 paper pad, and up to 4 pens. Dimensions: 135 x 150 x 275 mm (5 3 / 8" x 6" x 10 7 / 8"), plated : Support rails/shelf polished chrome/aluminum 521.61.238 chrome matt/aluminum 521.61.428 nickel matt/stainless steel 521.61.638 (includes memo pad and ball-point pen) Dimensions listed are width x depth x height 956

Countertop Supports Side mounts or mounts to countertop Bio-Fix products from Häfele. 40 (1 1 /8") 323 (12 3 /4") 150 (6") Side-mount Material: aluminum silver, matt anodized 505.14.956 (includes mounting hardware) 100 (4") 199 (7 7 /8") 140 (5 1 /2") Material: aluminum silver, matt anodized 505.14.916 (includes mounting hardware) 372 (14 5 /8") 100 (4") 170 (6 5 /8") 140 (5 1 /2") 270 (10 5 /8") Mounts on the countertop Material: aluminum silver, matt anodized 505.14.926 (includes mounting hardware) max. 60 mm (2 1 /2") 100 (4") 140 (5 1 /2") 310 (12 1 /4") 957 210 (8 1 /4") 170 (6 3 /4") max. 60 mm (2 1 /2") Max. 40 mm (1 1 /2") 240 (9 1 /2") 99 (3 7 /8") 100 (4") Material: aluminum silver, matt anodized 505.14.936 (includes mounting hardware) Frame type Material: light alloy silver, matt anodized 505.10.908 (includes mounting hardware)

Countertop Supports Maximum load capacity: 15 kg (33 lbs.) Maximum distance between supports: 600 mm (23 1 2") Bio-Fix products from Häfele. 200 mm (7 7 8") 200 mm (7 7 8") 90º Countertop support For solid tops Size: Ø 50 x 200 mm (2" x 7 7 8") chrome-plated 505.15.200 matt chrome 505.15.400 (includes mounting hardware) For glass tops Mounts on the countertop with glue to the glass Size: Ø 50 x 200 mm (2" x 7 7 8") chrome-plated 505.15.201 matt chrome 505.15.401 (includes mounting hardware) 20º 200 mm (7 7 8") 200 mm (7 7 8") Angled Countertop support slanted 20º For solid tops Size: Ø 50 x 200 mm (2" x 7 7 8") chrome-plated 505.15.210 matt chrome 505.15.410 (includes mounting hardware) Solid top Glass top Mounting application showing 90º support Flat Insert* For glass tops Mounts on the countertop with glue to the glass Size: Ø 50 x 200 mm (2" x 7 7 /8") chrome-plated 505.15.211 matt chrome 505.15.411 (includes mounting hardware) *Note: For the specification of a correct adhesive bond for the fitting of the glass top, please contact your glass supplier. 958

Shelf Suspension System For shelves suspended from the ceiling For attachment through wood or glass, a 14 mm hole is required 14 mm (9 3/4") Beta shelf suspension system Load carrying capacity: 50 kg (110 lbs.) per rod /brass, surface-threaded chrome polished 828.50.208 chrome matt 828.50.408 (includes 1 threaded rod M8X1000, 1 tube Ø 20 x 896 mm, 1 upper sleeve, 1 centering ring, 1 sleeve nut, 1 rubber clamping ring) Drill ø 12mm Suspension system 70 (6 3 /4") 24 (1") Intermediate supports, for additional ceiling shelves to the Beta suspension system Material: brass, electroplated chrome polished 828.50.210 brass polished 828.50.410 Packing: 1 [set] Text Change Intermediate supports X = Shelf thickness (glass: min. 10 mm) 959 ø 20mm X Max. 896 (36 1 /4") X

Ventilation Grills A E T Air ventilation grommets, recess-mounted Material: plastic Dimensions (mm) A E T white 571.27.714 ø38 ø34 15 black 571.27.312 Packing: 50 pcs. 48 (1 7 8") 44 (1 3 4") 7 Air ventilation cap, recess-mounted, with harpoon-type fitting Material: plastic white 571.09.707 brown 571.09.109 Packing: 50 pcs. 65 (2 9 16") 60 (2 3 8") 9 Air ventilation cap, recess-mounted Material: plastic white 571.03.723 brown 571.03.125 Packing: 50 pcs. 50 (2") 35 (1 3 8") 13 Air cap, recess-mounted, with harpoon-type fitting Material: plastic white 571.10.700 Packing: 100 pcs. 123 (4 3 4") 99 (3 7 8") 2 11 Air ventilation cap, recess-mounted, with flanged rim Ventilation area cm 2 : 50.0 Material: plastic white 571.67.718 Packing: 10 pcs. 960

Ventilation Grills 230 (9 1 16") 61 (2 7 16") 8 Air ventilation grill, with flanged rim Ventilation area cm 2 : 42.24 Material: plastic 68 (2 11 16") 220 (8 3 4") 2 chrome-plated 571.54.248 Packing: 50 pcs. 227 (9") 60 (2 3 8") 2 Air ventilation grill, with flanged rim Ventilation area cm 2 : 60 Material: plastic 68 (2 11 16") 220 (8 3 4") 7 white 571.55.343 Packing: 50 pcs. 64 (2 1 2") 225 (8 7 8") 213 (8 3 8") 55 (2 3 16") 2 7 Air ventilation grill, with flanged rim and oval recess section, no holes, mounted by adhesive Ventilation area cm 2 : 45.0 Material: plastic chrome-plated 571.52.208 Packing: 50 pcs. A C D B 2 13 Air ventilation grill, with flanged rim Material: plastic Dimensions (mm) Ventilation area white A B C D cm 2 108 84 254 230 100.0 571.64.726 120 96 299 275 150.0 571.64.735 132 108 338 314 200.0 571.64.744 Packing: 10 pcs. 961

Lattice Grills Decorative grills for door panels. Slats are shaped and sanded prior to assembly, so that the grill can be varnished without further treatment Glued, triple-laminated slats are exceptionally resistant to warping Double-sided, sanded, and ready to stain Decorative and ventilation grills, rounded on one side Panel dimension: 1200 x 600 mm (47 1 /4 x 23 5 /8") Spaced 12 mm apart, the slats are arranged at 45 to the panel edges Material: natural wood, sanded Wood species Thickness beech 3.0 mm 574.90.301 oak 3.4 mm 574.90.409 maple 3.4 mm 574.90.101 pine 3.0 mm 574.90.001 cherry 2.0 mm 574.90.601 Decorative and ventilation grills 5 mm thickness Panel dimension: 2000 x 800 mm (78 3 /4 x 31 1 /2") Spaced 15 mm apart, the slats are arranged diagonal at 45 to the panel edges Material: natural wood, sanded Wood species Packing maple 574.93.100 1 pc. cherry 574.93.600 1 pc. oak 574.93.400 5 pcs. pine 574.93.000 5 pcs. Decorative and ventilation grills 5 mm thickness Panel dimension: 2000 x 800 mm (78 3 /4 x 31 1 /2") Spaced 15 mm apart, the slats are arranged at 90 to the panel edges (square) Material: natural wood, sanded Wood species Packing maple 574.93.110 1 pc. cherry 574.93.610 1 pc. oak 574.93.410 5 pcs. pine 574.93.010 5 pcs. 962