ROTARY DRILLING TOOLS FOR WATER WELL, BLAST HOLE AND MINERAL EXPLORATION DRILLING

ROTARY DRILLING TOOLS FOR WATER WELL, BLAST HOLE AND MINERAL EPLORATION DRILLING APPROVED A. / GEPRÜFT NAH DIN EN ISO 9001 MATERIAL PIPE / ROHR ST, STRUTO 70, GRADE E,, G + S Production Fertigung MATERIAL TOOL JOINT / VERBINDER 4 R MO 4 V FRITION WELDING / REIBSHWEISSUNG MA. PIPE / ROHR /8 HARD FAING / AUFTRAGS- SHWEISSUNG A. / GEM. SK-STANDARD Engineering Konstruktion Friction Welding Reibschweißungen Heat Treatment Wärmebehandlung

Introduction Schmidt, Kranz & o was founded in 188 and has since been supplying drilling tools and accessories to oil and gas exploration companies, water, mineral and quarry drilling contractors, also deep coal and salt mines. The material used in the production of tool joints, subs, stabilizers, collars and pipes conforms to API standards and is traceable by our suppliers relevant certification. The manufacturing process utilises modern N systems, robots and friction welding machines, thus guaranteeing cost effective and quality assured production. PERFORATOR GmbH holds the API Spec 7 license no. 7-001. References from all over the world Europe, Near East, Far East, Russia, Ukraine, USA are proof of the confidence our customers have shown over the years, and we would be pleased to provide this service for you also. 3

Drill Pipes without flats Drehbohrstangen ohne Schlüsselflächen Drill Pipes listed are for all types of applications. They are to be used for rotary drilling and suitable for down the hole drilling. t B L 4 A OD mm OD t wall tool joints connection ID mm max. machine torque (knm) approx. weight for 3 m lenght kg Schmidt, Kranz drg. no. 1 0.317 W 1 (Tr 43.x1/4 ). 7 VB 40.00.00-8 0.3 3/8 0.80 Gg 4 3. 9 VB 81.00.00-7,1 3. 1/ 0.48 W 3 (Tr 1x1/4 ) 3.7 30 VB 847.00.00-,3 70 3/4 0.17 Gg 38 3. 3 VB 09.00.00-S-4 73 7/8 0.48 W 73 (Tr 3x1/4 ).0 3 VB 73.00.00-,3 7.1 3 0.34 Gg 7.0 48 VB 790.00.00-8,8 7.1 3 0.48 API 3/8 REG 30. 38 VB 180.00.00-,3 7.1 3 0.34 Tr x1/4 4 7.0 47 VB 3.00.00-8,8 7.1 3 0.34 W 73 (Tr 3x1/4 ) 7.0 4 VB 43.00.00-8,8 8. 3 1/4 0.34 API 3/8 REG 8 8. VB 77.00.00-8,8 88.9 3 1/ 0.34 API 3/8 IF 3 10.1 0 VB 34.00.00-8,8 88.9 3 1/ 0.34 API 3/8 REG 30 10.1 8 VB 47.00.00-8,8 101. 4 0.34 API 3 1/ REG 38 13.7 VB 8.00.00-8,8 114.3 0.34 API 3 1/ REG 38 17.8 78 VB 9.00.00-8,8 114.3 0.394 API 3 1/ FH 70 19. 8 VB 913.00.00-10 17 0.394 API 3 1/ REG 38 4.9 99 VB 38.00.00-10 17 0.394 API 3 1/ IF 0 4.9 99 VB 9.00.00-10 139.7 1/ 0.394 API REG 7 30.8 11 VB 18.00.00-10 19 1/4 0.80 API IF 9 30.8 10 VB 81.00.00-7,1

Drill Pipes with flats pin side Drehbohrstangen mit Schlüsselflächen nippelseitig Drill Pipes listed are for all types of applications. They are to be used for rotary drilling and suitable for down the hole drilling. t B L A t J D max. approx. Schmidt, OD OD wall tool joints ID length across machine weight for flats Kranz mm connection mm shoulder mm flat mm torque (knm) 3 m length kg pin drg. no. 48.3 1.9 0.17 Gg 1 3/1 14 10 41 1.4 7 sq VB 70.00.00-4,0 1 0.48 Gg 1 3/1 14 41. 7 sq VB 978.00.00-,3 1 0.48 Tr 41 x 1/4 1 1 41. 30 sw VB 438.00.00-,3 0.3 3/8 0.80 Gg 4 13 0 3. 30 sq VB 17.00.00-7,1 0.3 3/8 0.80 Gg 4 3 1 0 3. 30 sq VB 1.00.00-7,1 0.3 3/8 0.80 Gg 4 1 0 3. 30 sq VB 974.00.00-7,1 8 11/1 0.393 Tr x 1/ 1.8 4 key VB 849.00.00-10,0 70 3/4 0.34 Tr 4 x 1/4 38 10.8 44 key VB 41.00.00-8,8 7.1 3 0.34 W 73 (Tr 3 x 1/4 ) 1 0 7.0 47 sq VB 8.00.00-8,8 7.1 3 0.34 Gg 10 7.0 1 key VB 91.00.00/S-8,8 7.1 3 0.34 API 3/8 REG 10 7.0 0 key VB 904.00.00-8,8 7.1 3 0.34 REG 1 x 1/ 4 10 7.0 0 key VB 819.00.00-8,8 7.1 3 0.34 REG 1 x 1/ 0 10 7.0 0 key VB 910.00.00-8,8 8. 3 1/4 0.34 API 3/8 REG 10 8. 7 key VB 8.00.00/S-8,8 88.9 3 1/ 0.34 API 3/8 REG 10 10.1 4 key VB 17.00.00-8,8 101. 4 0.34 API 7/8 REG 3 10 13.7 77 key VB 89.00.00-8,8 114.3 0.393 API 3 1/ REG 40 0 9 19. 8 sq VB 3.00.00-10,0 114.3 0.34 API 3 1/ REG 38 1 17.8 83 key VB 948.00.00-8,8 17 0.393 API 3 1/ REG 48 13 4.9 108 key VB 787.00.00-10,0 139.7 1/ 0.433 API REG 18 11 33.1 17 sw VB 3.00.00-11,0 139.7 1/ 0.34 API REG 10 11 7.8 10 sq VB 178.00.00-8,8 sw = spanner flats sq = square flats key = key flats

Drill Pipes with flats box side Drehbohrstangen mit Schlüsselflächen muffenseitig Drill Pipes listed are for all types of applications. They are to be used for rotary drilling and suitable for down the hole drilling. t B L A OD mm t OD wall tool joints connection J D max. approx. Schmidt, ID length across machine weight for flats Kranz mm shoulder mm flat mm tourque (knm) 3 m length kg box drg. no. 4.4 1 11/1 0.48 Rd 3 x 1/8 40 3 1.4 19 sq VB 3.00.00/l-,3 1 0.48 Rd 40 x 1/ 1 41. 3 sq VB 34.00.00-,3 0.3 3/8 0.80 Gg 4 7 0 0 3. 30 sq VB 984.00.00-7,1 7.1 3 0.34 REG 1 x 1/ 0 140 7.0 49 key VB 3.00.00-8,8 7.1 3 0.34 Gg 3 101 0 7.0 4 sw VB 918.00.00-8,8 80 3 1/8 0.3 API 3/8 REG 8 10 8.0 key VB 194.00.00-9,0 88.9 3 1/ 0.34 API 3/8 IF 3 8 7 10.1 7 sw VB 1.00.00-8,8 17 0.394 API 3 1/ REG 40 90 4.9 118 key VB 88.00.00-10,0 17 0.394 API 3 1/ IF 0 100 9 4.9 98 sw VB 47.00.00-10,0 139.7 1/ 0.433 API REG 7 170 11 33.1 11 sw VB 780.00.00-11,0 14 0.394 API 3 1/ REG 40 9 17 33.9 117 sw VB 7.00.00-10.0 3/4 sw = spanner flats sq = square flats key = key flats

Drill Pipes with flats on both sides Drehbohrstangen mit beidseitigen Schlüsselflächen Drill Pipes listed are for all types of applications. They are to be used for rotary drilling and suitable for down the hole drilling. t B L A t J D max. approx. Schmidt, OD OD wall tool joints ID length shoulder across machine weight for Kranz mm connection mm pin / box mm flat mm torque (knm) 3m length kg flats drg. no. 1 0.48 Rd 40 x 1/ 1 /0 41. sq VB 188.00.00-,3 7 1/4 0.197 Rd 40 x 1/4 7/1 4.4 sq VB 7.00.00-,0 0.3 3/8 0.80 Gg 4 7 8/1 0 3. 30 sq VB 91.00.00-7,1 0.3 3/8 0.80 Gg 4 80/0 3. 3 key VB 14.00.00-7,1 8 11/1 0.394 Tr x 1/ /0.8 4 sq VB 19.00.00-10,0 8 11/1 0.17 Rd 4 x 3 80/ 0 3.0 3 sq VB 88.00.00-4,0 70 3/4 0.0 Gg 38 8/10 0 4. 9 sw VB 09.00.00-, 70 3/4 0.0 Gg 3 8/10 0 4. 9 sq VB 80.00.00-, 70 3/4 0.0 Gg 1 3/4 3 8/0 0 4. 30 sq VB 79.00.00-, 70 3/4 0.17 Rd 0 x 1/ 30 0/10 0 4. sq VB 87.00.00-4,0 7.1 3 0.48 API 3/8 REG 30 77/. 37 sq VB 3000.00.00-,3 7.1 3 0.34 REG 1 x 1/ 0 90/10 7.0 0 key VB 4.00.00-8,8 7.1 3 0.17 API 3/8 REG 30 108/10 0 3.9 4 sq VB 78.00.00-4,0 7.1 3 0.0 Gg 100/.1 3 sq VB.00.00-, 8. 3 1/4 0.48 API 3/8 REG 8 8/1 70. 40 sq VB 89.00.00-,3 88.9 3 1/ 0.48 API 3/8 REG 30 77/1 7.8 4 sq VB 3001.00.00-,3 88.9 3 1/ 0.17 API 3/8 REG 30 108/10.4 3 sq VB 73.00.00-4,0 88.9 3 1/ 0.48 API 3/8 IF 3 9/13 70 7.8 4 sw VB 0.00.00-,3 88.9 3 1/ 0.48 Rd 70 x 1/4 30 71/11 4 7.8 43 sq VB 44.00.00-,3 88.9 3 1/ 0.48 API 7/8 REG 3 110/13 7.8 4 sq VB 94.00.00-,3 101. 4 0.34 API 3 1/ REG 4 108/19 7. 13.7 73 sq VB.00.00-8,8 101. 4 0.34 API 7/8 REG 3 70/0 8 13.7 8 sq VB 07.00.00-8,8 114.3 0.48 API 3 1/ REG 38 89/ 9 13. 3 sq VB 300.00.00-,3 114.3 0.34 API 7/8 IF 4 100/30 100 17.8 78 sq VB 39.00.00-8,8 114.3 0.34 API 3 1/ IF 8 100/30 100 17.8 7 sq VB 70.00.00-8,8 17 0.48 API 3 1/ REG 38 9/0 110 17.1 73 sq VB 3004.00.00-,3 17 0.34 API 4 FH 71 90/1 110. 97 sq VB 31.00.00-8,8 17 0.34 API 3 1/ IF 8 14/17 110. 9 sq VB 88.00.00-8,8 139.7 1/ 0.48 API 3 1/ REG 4 9/0 11 1.0 84 sq VB 3003.00.00-,3 139.7 1/ 0.34 API REG 7 9/0 11 7.8 10 sq VB 300.00.00-8,8 139.7 1/ 0.34 API 4 FH 71 90/14 110 7.8 107 sq VB 38.00.00-8,8 1.4 0.34 API 3 1/ IF 8 10/40 130 33. 110 sq VB 89.00.00-8,8 19 1/4 0.34 API REG 7 9/ 130 3.9 131 sq VB 8.00.00-8,8 177.8 7 0.34 API /8 REG 88 10/ 10 4.9 1 sq VB 98.00.00-8,8 193.7 7 /8 0.34 API /8 REG 90 17/30 1.4.4 178 sq VB 937.00.00-8,8 03 8 0.394 API /8 REG 90 17/30 1.4 9.0 00 sq VB 888.00.00-10,0 4 10 API 8 /8 REG 10 17/30 00 10.0 380 sq VB 3.00.00-1,0 sw = spanner flats sq = square flats key = key flats 7

Reverse irculation Drill Pipes Lufthebestangen ID 0 ft D t wall tool joints connection J A length shoulder OD ID box pin max. approx. machine weight unit torque (knm) lbs kg Schmidt, Kranz drg. no. 3 1/4 0.88 API 3 1/ IF 4 1/4 3/8 7.3 8 117. VB 93.00.00 3 1/ 0.88 API 4 FH 4 1/4 /8 8. 8 130 VB 11.00.00 4 0.88 API 4 IF 4 3/4 3 3/1 11. 38 13 VB 13.00.00 4 1/4 0.304 API IF 4 3/4 3 9/1 14. 438 199 VB 100.00.00 4 1/4 0.304 API FH 4 1/1 14. 409 18 VB 11.00.00 0.304 API 1/ FH 7 7 4 1/8 0.9 48 13 VB 117.00.00 1/ 0.304 API 1/ IF 7 7 3/8 4 3/4.7 33 88 VB 101.00.00 1/4 0.88 API /8 FH-short 7 7/8 4 3/4 7 /1 4 11/1 30.7 38 90 VB 39.00.00 1/4 0.88 API /8 FH-short 8 1/4 1/4 1/4 98 7 VB 0.00.00 4 30.7 0 ft D t wall tool joints connection J F length shoulder ID box pin max. approx. machine Weight unit torque (knm) lbs kg Schmidt, Kranz drg. no. 3 1/ 0.37 Tr 7 x 1 /4 3 1/1 3 1/1 1/1 11.0 33 147 VB 74.00.00 0.37 API 3 1/ IF 3 1/1 3 1/1 3 1/1 1/1 19. 391 178 VB 7.00.00 0.37 Tr 10 x 1/4 3 1/1 /1 3 1/1 1/4 19. 391 178 VB 8.00.00 0 ft ID 0 ft 8 D t wall tool joints connection J A length shoulder OD ID box pin max approx. machine weight unit torque (knm) lbs kg Schmidt, Kranz drg. no. 4 0.48 Tr 108.8 x 1/4 3 1/1 3 1/1 1/ 3 /8 10. 73 14 VB 48.00.00 0.48 Tr 108.8 x 1/4 3 1/1 3 1/1 1/ 3 /8 13. 343 1 VB 44.00.00 1/ 0.394 API 1/ IF 10 1/4 /1 8 3/4 4 3/4 30.8 98 7 VB 4.00.00 1/4 0.31 Tr 180.1 x 1/4 10 1/4 /1 8 3/4 4 3/4 34.0 8 310 VB 33.00.00 8 /8 0.347 API-S 9/4 x 1/4 1 1/ 7 1/ 11 11 11/1 44.0 90 430 VB 33.00.00

Drill Pipes special design with hex. wrench flats Drehbohrstangen For use with Ingersoll Rand Rigs A J F-Hex F-SQ D G Schmidt, OD wall tool joints ID length shoulder to flat Kranz connection max. pin box box pin box pin drg. no. 3 1/ 0.34 API 3/8 REG 1 1/8 8 7/8 8 1/ 3 1/ 1/ 1/ 3 1/ 3 1/4 VB 794.00.00 0.34 API 7/8 IF 1/8 8 7/8 8 1/1 4 3 1/ 3 1/ 3 1/ 3 3/4 VB 77.00.00 0.34 API 3 1/ REG 1 3/4 8 3/8 8 1/1 4 3 1/ 3 1/ 3 1/4 3 1/ VB 104.00.00 0.34 API 3 1/ REG 1 3/4 8 3/8 8 1/1 4 3 1/ 3 1/ 3 1/ 3 1/8 VB 383.00.00 0.34 API 7/8 REG 1 1/4 8 3/8 8 1/1 4 3 1/ 3 1/ 3 1/4 3 1/ VB 1.00.00 0.394 API 3 1/ REG 1 7/8 8 /8 8 4 3 1/ 3 1/ 3 1/ 3 1/ 3 /8 VB 9.00.00 0.4 API 3 1/ REG 1 3/4 8 /8 8 1/1 4 3 1/ 3 1/ 3 1/4 3 1/8 3 1/8 VB 93.00.00 0. API 3 1/ REG 1 3/4 8 3/8 8 1/ 4 3 /8 3 1/ 3 1/ 3 1/ 3 /1 VB 907.00.00 0. API 3 1/ REG 1 11/1 /1 4 3 1/ VB 3.00.00 1/ 0.4 API 4 FH 1/ 8 9/1 8 3/1 4 1/4 3 1/8 3 VB 484.00.00 1/ 0. 3 1/ BEO 1 /8 8 1/8 11 4 1/4 3 1/8 3 VB 983.00.00 Basic dimensions, special combinations available on request. Please advise: drill pipe length, wall thickness, thread type and size, wrenches, tubing OD. For use with Dril Tec Rigs B ID L A J F-box F-pin D G Schmidt, OD wall tool joints ID length shoulder to flat sw sw Kranz connection max. pin box drg. no. 3 1/ 0.37 API 3/8 IF 1 3/4 3 1/4 1/4 3 1/4 3/4 1 1/ VB 98.00.00 4 0.33 API 3/8 IF 1 3/4 3 1/4 1/4 3 1/ 3/4 1 1/ VB 98.00.00 0.33 API 7/8 IF 3 1/4 1/4 4 3 1 1/ VB 987.00.00 0. API 3 1/ REG 1 3/4 3 1/4 1/4 4 3 1 1/ VB 988.00.00 0. API 3 1/ REG 1 1/ 3 1/4 1/4 4 3 1 1/ VB 989.00.00 0.37 API 3 1/ REG 1/4 3 1/4 1/4 4 /8 3 1 1/ VB 990.00.00 0. API 3 1/ REG 1 3/4 3 1/4 1/4 4 3 1 1/ VB 991.00.00 9

Drill ollars Schwerstangen ID 10 ft A OD ID tool joints connection ID pin F-Box F-Pin Schmidt, Kranz drg. no. 3 1/ 1 1/ API 3/8 REG 1 1/8 0 118 BZ 13.01.00/10 3 1/ 1 1/ API 7/8 REG 1 1/4 3/4 3/4 0 118 BZ 1.3.00/10 3 1/ 1 1/ API 3/8 IF 1 1/ 0 118 VPI-Z 10.01.00/10 4 1/4 1/1 API 7/8 IF 1/1 374 170 VPI-Z 1.11.00/10 3 3/4 418 190 VPI-Z 1.01.00/10 4 3/4 13/1 API 3 1/ IF 11/1 39 178 VPI-Z 1.18.00/10 1/ /1 API 4 FH 13/1 38 90 VPI-Z 7.0.00/10 7/8 API REG 1/4 1/8 1/8 739 33 VPI-Z 3.04.00/10 7/8 API 3 1/ FH 7/1 739 33 VPI-Z 1.01.00/10 3 13/1 API IF 3 3/4 7 0 VPI-Z 3.08.00/10 1/4 3 1/8 3 1/4 73 347 VPI-Z.01.00/10 8 4 1/1 API 1/ REG 3/4 147 7 VPI-Z 4.0.00/10 8 4 1/1 API /8 REG 3 1/ 147 7 VPI-Z.11.00/10 API 3 1/ REG 1 1/ API 4 IF Design on request / Auf Anfrage 10 approx. weight unit lbs kg

Stabilizers Stabilisatoren drill hole Z A B S H ID P Schmidt, Kranz dia mm connection drg. no. /8 /8 14.8 API 7/8 IF 40 1 3/1 1/1 10 VPI-Z 14.0.00 / 40 / /8 /8 /8 14.8 API 3 1/ REG 40 1 3/1 1 1/ 10 VPI-Z 1.0.00 / 40 / /8 3/4 14 API 7/8 IF 40 1 3/1 1/1 10 VPI-Z 14.0.00 / 40 / 3/4 14 API 3 1/ REG 40 1 3/1 1 1/ 10 VPI-Z 1.0.00 / 40 / 1/4 1.4 API 3 1/ REG 40 1 3/1 1 1/ 10 VPI-Z 1.0.00 / 40 / 1/4 1/4 1.4 API 7/8 IF 40 1 3/1 1/1 10 VPI-Z 14.0.00 / 40 / 1/4 3/4 1/ 1 API 3 1/ IF 1/ 40 1 3/1 1/ /1 10 VPI-Z 3.4.00 / 40 / 3/4 7 3/8 7 1/8 181 API 3 1/ IF 1/ 40 1 3/1 1/ /1 10 VPI-Z 3.4.00 / 40 / 7 3/8 8 1/ 8 1/4 1 API 3 1/ IF 4 1 3/1 1/ /1 1 VPI-Z 3.0.00 / 4 / 8 1/ 8 1/ 8 1/4 1 API REG 8 4 1 3/1 1/ 1/4 1 VPI-Z 3.03.00 / 4 / 8 1/ 9 7/8 9 /8 44. API 3 1/ IF 8 4 1 3/1 1/ /1 13 VPI-Z 3.0.00 / 4 / 9 7/8 9 7/8 9 /8 44. API REG 8 4 1 3/1 1/ 1/4 13 VPI-Z 3.08.00 / 4 / 9 7/8 11 10 3/4 73 API 3 1/ IF 8 4 1 3/1 1/ /1 13 VPI-Z 3.0.00 / 4 / 11 11 10 3/4 73 API REG 8 4 1 3/1 1/ 1/4 13 VPI-Z 3.08.00 / 4 / 11 11 10 3/4 73 API /8 REG 9 4 7 3/4 3 1/ 4 VPI-Z.0.00 / 4 / 11 1 1/4 1 304.8 API REG 8 44 1 3/1 1/ 1/4 14 VPI-Z 3.09.00 / 44 / 1 1/4 1 1/4 1 304.8 API 3 1/ IF 8 44 1 3/1 1/ /1 14 VPI-Z 3.03.00 / 44 / 1 1/4 1 1/4 1 304.8 API /8 REG 9 4 7 3/4 3 1/ 4 VPI-Z.0.00 / 4 / 1 1/4 13 3/4 13 1/ 34.9 API 3 1/ IF 8 44 1 3/1 1/ /1 14 VPI-Z 3.03.00 / 44 / 13 3/4 13 3/4 13 1/ 34.9 API REG 8 44 1 3/1 1/ 1/4 14 VPI-Z 3.09.00 / 44 / 13 3/4 14 3/4 1 38.3 API 3 1/ IF 8 44 1 3/1 1/ /1 14 VPI-Z 3.03.00 / 44 / 14 3/4 1 14 3/4 374. API 3 1/ IF 8 1 1 3/1 1/ /1 1 VPI-Z 3.04.00 / 1 / 1 1 14 3/4 374. API /8 REG 9 4 7 3/4 3 1/ 4 VPI-Z.0.00 / 4 / 1 17 1/ 17 1/4 444. API /8 REG 9 4 7 3/4 3 1/ 4 VPI-Z.0.00 / 4 / 17 1/ 0 19 1/ 08 API /8 REG 9 4 7 3/4 3 1/ 4 VPI-Z.0.00 / 4 / 0 Design on request / Auf Anfrage Ribs with hard banding 11

Bits Bohrschneiden und -meißel arbide Blade Bits Bits ar principally used for exploration. D diameter mm connection pin hole lbs kg 4 1/4 /8 3/4 7 3/8 API 3/8 REG API 3/8 REG API 3/8 REG API 3/8 REG API 3/8 REG API 3 1/ REG API 3 1/ REG API 3 1/ REG.8 8.8 10.3 1 1 33 41 3.1 3.1 4.7 7.3 9. 1 1 18. 98 108 114.3 17 143 1.4 171. 187.3 weight Schmidt, Kranz drg. no. BZ 3.01.00 / BZ 3.01.00 / 4 1/4 BZ 3.01.00 / BZ 3.01.00 / BZ 3.01.00 / /8 BZ 3.1.00 / BZ 3.1.00 / 3/4 BZ 3.1.00 / 7 3/8 Steel Tooth Rock Bits Tungsten arbide Bits Design Z: toothed Design W: wart-studded D diameter mm connection pin hole weight lbs Schmidt. Kranz drg. no. design Z kg design W 98 API 3/8 REG 7. 3.4 BZ 3.0.00 / -Z 114.3 API 3/8 REG 11 BZ 3.0.00 / -Z 17 API 7/8 REG 1.8 BZ 97.01.00 / -Z /8 143 API 3 1/ REG 10 BZ 3.1.00 / /8 -Z 1/4 18.7 API 3 1/ REG 30 13. BZ 3.1.00 / 1/4 -Z 7 3/8 187.3 API 3 1/ REG 4 19.1 BZ 3.1.00 / 7 3/8 -Z 8 1/ 1.9 API REG 7 34 BZ 3.19.00 / 8 1/ -Z Bits are available for soft, medium and hard formation and for fluid, air, jet circulation. BZ 3.0.00 / -W BZ 3.0.00 / -W BZ 97.01.00 / -W BZ 3.1.00 / /8 -W BZ 3.1.00 / 1/4 -W BZ 3.1.00 / 7 3/8 -W BZ 3.19.00 / 8 1/ -W Remark: Other sizes on request! Multi-Stage Rotary Drill Bits type SK-L S 0 SK-L H 8 SK-L T 1 SK-L B 70 SK-L H 7 SK-L W 73 SK-L B 90 SK-L S 7 SK-L W 3 SK-L S 3 1 suitable for drill pipe connection Salzgitter 0 Tr 0 x 1/ 8 Tr x 1/ Hausherr Turmag 1 Rd 40 x 1/ Böhler 70 Rd 0 x 1/ Hausherr 7 API 3/8 REG 73 Tr 3 x 1 /4 Wirth Böhler 90 Rd 70 x 1/4 Salzgitter 7 Gg Wirth 3 Tr 1 x 1 /4 Salzgitter 3 Tr 0. 48 x 1/4 Diameter to be advised! D 3 /8 3 11/3 3 3/4. 4 9/4. 4 17/3. 1/8 Schmidt. Kranz drg. no. BZ 3.0.00 BZ 19.0.00 BZ 34.41.00 BZ 4.1.00 BZ 70.0.00 BZ 73..00 BZ 77.01.00 BZ 790.01.00 BZ 847.4.00 BZ 949.04.00

Fishing Tools Fangwerkzeuge Overshots with female or male thread RH or LH (to be advised) Size Range / Fangbereich OD Größe mm inch I 7.1. 4 3 1 I a 8 38 II 88.9 38.1 3 1/ 1 1/ II a 7.1 38.1 3 1 1/ II e 0 77 III 114.3 3. 1/ III a 114.3 38.1 1 1/ III b 101. 38.1 4 1 1/ Size Range / Fangbereich OD Größe mm inch III c 101. 0.8 4 IV 139.7 88.9 1/ 31/ VI a 17.0 7.1 3 V 1.1 114.3 1/ VI 190. 139.7 7 1/ 1/ VII 1.0 1.1 8 1/ 1/ VIII 41.3 190. 9 1/ 7 1/ I.7 1.0 10 1/ 8 1/ Taper Taps with female or male thread RH or LH (to be advised) Size Range / Fangbereich OD Größe mm inch I.4 88.9 1 3 1/ I a 10 1 I b 1 0.3 I c 1 3. I d 1-70 I e 18 73 I f 19 7.1 I g 19 80 II.4 101. 1 4 III 38.1 114.3 1 1/ Size Range / Fangbereich OD Größe mm inch III a 0.8 17 III b 38.1 17 1 1/ IV 3. 139.7 1/ 1/ V 88.9 1.1 3 1/ 1/ V a 101. 177.8 4 7 VI 114.3 190. 7 1/ VII 139.7 1 1/ 8 1/ VIII 1.1 41.3 1/ 9 1/ I 190..7 7 1/ 10 1/ 13

Subs Box Pin Übergangsstücke connection box up A Pin down B length length shoulder J width spanner flats E std. bore d outside diameter top bottom D1 D across flat F Schmidt. Kranz drg. no. API 3/8 REG API 3 1/ REG 3/4 1 1/ 3 1/ 3/4 BZ 1.01.00 API 3/8 REG API 3/8 IF /1 1 1/ 3 1/ 3 1/ 3/4 BZ 1.0.00 API 3/8 REG API 7/8 REG /1 1 1/4 3 1/ 3 1/ 3/4 BZ 1.03.00 API 7/8 REG API 3/8 REG /1 3/4 1 1/4 3 1/ 3 1/ 3/4 BZ 1.07.00 API 7/8 REG API 7/8 IF 4 /1 1 3/8 1 1/ BZ 1.08.00 API 7/8 REG API 3 1/ IF 1/ 3 3/4 1 3/4 1/ BZ 1.09.00 API 7/8 REG API 3 1/ REG /1 1 3/4 BZ 1.10.00 API 7/8 REG API REG 7/8 3 1/1 1 3/4 3/4 BZ 1.11.00 API 3 1/ REG API 7/8 REG 1/8 1 1/4 BZ 3.01.00 API 3 1/ REG API 7/8 REG 1/8 1 1/ BZ 3.03.00 API 3 1/ REG API FH 7/1 /1 3/4 BZ 3.04.00 API 3 1/ REG API 3 1/ IF 7/1 1 3/4 1/ BZ 3.0.00 API 3 1/ REG API REG /1 1/1 3/4 BZ 3.0.00 API 3 1/ REG API /8 REG 1 /1 8 BZ 3.10.00 API 3 1/ REG API 3/8 IF 1 1/ 3 1/ BZ 3.07.00 API 3 1/ REG API 3 1/ REG 4 1 3/4 BZ 3.08.00 API 3 1/ REG API 3/8 REG 3/4 1 3 1/ BZ 3.09.00 API N 3 API 7/8 REG /1 1/ 1/4 7/8 BZ 0.01.00 API N 3 API 7/8 IF /1 1/ 1/1 7/8 BZ 0.0.00 API N 3 API 3 1/ IF 1/4 3 /8 /1 1/ 7/8 BZ 0.03.00 API N 3 AP 3 1/ REG 3/4 3 3/4 1 3/4 7/8 BZ 0.04.00 API N 3 API N 3 1/ 3 3/4 /1 7/8 BZ 0.0.00 API N 3 API REG 7 3 3/4 1/1 3/4 7/8 BZ 0.0.00 API N 3 API /8 REG 9 /1 8 7/8 BZ 0.08.00 API REG API 3 1/ REG 1/4 3 1 3/4 3/4 4 3/4 BZ 30.01.00 API /8 REG API N 3 /1 7 3/4 3/4 7 BZ 0.18.00 API /8 REG API REG 10 /1 7 3/4 3/4 7 BZ 3.0.00 * 3/4 9 * Sizes obligatory. Length of sub can be altered on request. 14

Subs Box Box Übergangsstücke connection length length width std. outside diameter across Schmidt, box up pin down shoulder spanner flats bore top bottom flat Kranz A B * J E d D1 D F drg. no. API 3/8 REG API 3/8 REG 8 /8 1/ 4 1 1/ 3 1/ 3 1/ 3/4 BZ 1.04.00 API 3/8 REG API 3 1/ REG 1/1 1/4 1 1/ 3 1/ 3/4 BZ 1.0.00-I API 7/8 REG API 3/8 REG 8 /8 3/4 1 1/ 3 1/ BZ 1.1.00 API 7/8 REG API 7/8 IF 9 1/ 3/4 1 3/4 BZ 1.0.00 API 7/8 REG API 3 1/ REG 9 1/ 3/4 1 3/4 BZ 1.03.00 API 7/8 REG API 3 1/ IF 9 7/8 3 1 3/4 3 1/ 1/ BZ 1.04.00 API 7/8 REG API REG 9 7/8 3 1 3/4 3/4 BZ 1.0.00 API 7/8 REG API FH 9 7/8 3 1 3/4 3/4 BZ 1.0.00 API 3 1/ REG API 3 1/ REG 9 1/ 3/4 1 3/4 BZ 3.1.00 API 3 1/ REG API 3 1/ IF 10 /8 3 1/ 1 3/4 1/ BZ 3.13.00 API 3 1/ REG API REG 10 /8 3 1/ /1 3/4 BZ 3.14.00 API 3 1/ REG API FH 10 /8 3 1/ /1 3/4 BZ 3.1.00 API 3 1/ REG API /8 REG 11 1/4 3 1/ /1 7 3/4 BZ 3.1.00 API N 3 API 3 1/ REG 9 7/8 3 1/ 1 3/4 BZ 0.10.00 API N 3 API 3 1/ IF 10 /8 4 /1 1/ BZ 0.11.00 API N 3 API REG 10 /8 4 /1 3/4 BZ 0.1.00 API N 3 API FH 10 /8 4 /1 3/4 BZ 0.13.00 API N 3 API /8 REG 11 1/ /1 3/4 BZ 0.14.00 * Sizes obligatory. Length of sub can be altered on request. Subs Pin Pin Übergangsstücke connection length length width std. outside diameter across Schmidt, box up pin down shoulder spanner flats bore top bottom flat Kranz A B ** J E d D1 D F drg. no. Tr 1 x 1 /4 -W Tr 1 x 1/4 -W 3/4 3/8 1 1/ 1/ 3/1 BZ 847.08.00 Fl 3 x 1 /4 - Tr 3 x 1/4 -W 1/4 3/8 7/8 1 11/1 7/8 9/1 BZ 73.13.00 Fl 41. x 1/3 - Tr 3 x 1/4 -W 1/4 3/8 7/8 7/8 9/1 BZ 73.1.00 Tr x 1/4 -S Tr x 1/4 -S 14 /8 3/4 1 3/1 3 1/8 3 1/8 9/1 BZ 3.0.00 Tr x 1/4 -S Tr 7 x 1/4 -S 9 1/ 7 1/4 3 3 1/ 7/8 BZ 3.01.00 API 3/8 IF Tr 7 x 1/4 -S 9 1/ 7 1/ 1 3/8 1 1/4 3 1/ 3 1/ 7/8 BZ 34.03.00 API 3/8 REG API 7/8 REG 1 3 1/ 3 1/ 3/4 BZ 1.0.00 API 3 1/ REG API 3 1/ REG 7 1/ 1 3/4 BZ 3.17.00 API 3 1/ REG API N 3 7 1/ 1 3/4 1/ BZ 3.18.00 API 3 1/ REG API 3 1/ IF 8 3 1 3/4 1/ BZ 3.19.00 API 3 1/ REG API REG 3 /8 1/ 3/4 1 1/ 1/ 3 3/4 BZ 3.1.00 API REG API REG 3 1/4 1 1/4 1/ 1/ 4 3/4 BZ 3.0.00 API REG API /8 REG 4 3/4 1/3 1/4 1/ 7 1/8 4 17/3 BZ 3.04.00 ** Sizes obligatory. Length of sub can be altered on request. 1

Hoisting Equipment Hebewerkzeuge Swivel lifting plug with box connection API 3/8 REG up to API 7 /8 REG API 3 1/ FH up to API /8 FH API 3/8 IF up to API 1/ IF A D 7.1 B approx. 37 E H 7. 0 7 t Schmidt, Kranz drg. no. BZ 41.13.00.4 00 00 0 10 10 t VPI-Z.04.00 114.3 43 9 0 9 8t BZ 77.1.00 03. 00 180 0 10 10 t VPI-Z.0.00 88.9 37 70 0 7 t BZ 0.1.00 187.3 00 1 0 10 10 t VPI-Z 3.0.00 E H Other sizes on request. Swivel lifting plug with pin connection API 3/8 REG up to API 7 /8 REG API 3 1/ FH up to API /8 FH API 3/8 IF up to API 1/ IF A D 7.1 B approx. 3 7. 0 7 t Schmidt, Kranz drg. no. BZ 41.1.00.4 40 00 0 10 10 t VPI-Z.03.00 114.3 370 9 0 9 8t BZ 77.11.00 03. 40 180 0 10 10 t VPI-Z.01.00 88.9 3 70 0 7 t BZ 0.14.00 187.3 40 1 0 10 10 t VPI-Z 3.0.00 Other sizes on request. 1

Hoisting Equipment Hebewerkzeuge Hoisting Plugs A B J E D G H Schmidt, OD length tool joints length shoulder width spanner across Kranz connection flats flat drg. no. 4 11/1 1 3/1 API 3 1/ IF * 9/1 1/4 3 3/4 VPI-Z 19.03.00 1 API N 3 * 9/1 1/4 3 3/4 BZ 0.1.00 4 3/4 17 1/8 API 3 1/ IF ** VPI-Z 1.17.00 3 1/3 Tr 71. x 1/4 * 9/1 3/4 4 3/4 BZ 184.01.00 7 3/4 18 3/8 API /8 REG ** VPI-Z.10.00 Other sizes and threads on request. * male ** female Lifting Bail A B E G H Schmidt, Kranz OD Length tool joints connection approx. approx. approx. drg. no. 3 10 API 3/8 REG 4 9/1 3 3/1 9/1 BZ 37.04.00 1 API 3 1/ REG /1 4 4 BZ 3..00 1/ 11 11/1 API REG /1 4 4 BZ 3.30.00 7 1 API /8 REG 8 1/ 1/ 4 /1 VPI-Z.04.00 8 7/8 1 API 7 /8 REG 10 1/ 4 VPI-Z.0.00 1/4 14 API 4 FH 3/4 4 4 BZ 38.04.00 11 1/4 API 7/8 IF /1 4 4 BZ 7.03.00 4 3/4 1 API 3 1/ IF 3/4 4 4 BZ 44.01.00 1/4 1 1/8 API IF 8 1/ 1/ 4 /1 VPI-Z 3.0.00 17

Specialities Float valves (Ventile) 1. For Box-onnection API 3 1/ REG and API 7/8 REG Typ: F-3R = drg. no. VPI-Z 3.19.00. For Box-onnection API REG Typ: 4R = drg. no. VPI-Z 3.0.00 3. For Box-onnection API /8 REG and API 1/ FH Typ: F-R = drg. no. VPI-Z 3.1.00 18

ROTARY DRILLING TOOLS FOR WATER WELL, BLAST HOLE AND MINERAL EPLORATION DRILLING Threading With Robot Verbinderherstellung mit Roboter Hardfacing Auftragsschweißung Inspection Materialprüfung Packing Verpackung

PERFORATOR GmbH Bei dem Gerichte D-3744 Walkenried Fon +49 (0) / 01-0 Fax +49 (0) / 01-48 email: info@perforator.de Internet: www.perforator.de