Content. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.

Similar documents
SC series(twist drill) for machining of cast iron, Al alloy

Silver fox -New indexable drills for shallow holes

Carbide Drills When productivity matters - Stub 1. to Long 1

4 cutting edges. Diameter range Ø Ø41 Hardened protection against chip abrasion extends tool life

S-TAW. Changeable Carbide Insert Type Drill

Special Product Catalogue. T-A Drill Insert System

Coromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53

M.A.FORD Where high performance is the standard.

Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -

TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G

TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.

PROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools

Drilling Depth ( L / D) Content

MHS. Drills for die & mold machining B137A

MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE

Specializing In High Performance Solid Carbide Cutting Tools

8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332

Holemaking ADVANCES 2017 Inch

METAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT

Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on

KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling

DRILL INSERTS & HOLDERS

MHS TOOLS NEWS B137G. Drills for die & mould machining

Drilling tools. From page Centring drills NC spot drills. Twist drills HSS, HSS/ Co, solid carbide. From page 10-6

Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools

M.A.FORD Where high performance is the standard.

COMPETENCE IN PRECISION AND QUALITY HOLE SAWS

Solid Carbide Thread Milling

Special Product Catalogue. T-A Drill Insert System

Info Overview - solid carbide twist drills (I) Drilling Tools

KED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling

EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES

-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders

AquaREVO DRILLS NEW HIGHLY EFFICIENT AND MULTI-PURPOSE. Doubled tool life due to improved substrate, coating and cutting geometry

BELL, SCOTT & CO. LTD.

Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **

Solid Carbide Thread Milling

MACH-Drill. Excellent Chip Evacuation! Non-step machining High Quality High productivity High Value. No: Safety instruction

DRILLS CARBIDE. Drills Carbide When productivity matters - 3xd 1

GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ

2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features

Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric

CoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant

NHD - Improved Solid Carbide Drill

MHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.

Performance requires quality.

Reamers - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable

hole saws 260 PRECISION TOOLS

Solid carbide Twist Drills Overview

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

ADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加

Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End

Features. May 1, No. 204-M-02

POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.

SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.

-treme thread cutting. New. Swiss-Line. Inch

Taps, Dies & Threading

SMD type. SEC-MultiDrills. The Ultimate in Low Cost Drilling

Fine Pitch Cobalt Roughers

Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E

CTR Counterboring Tools

The HSS drill bit range

AQUA DRILL EX OIL-HOLE LONG

Special drills 88 PRECISION TOOLS

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

New Tool Ref Length (mm) Body Length (mm)

Milling Tools Milling Tools

Burrs.

B368E MS DRILL SERIES DRILLS FOR UNIVERSAL MACHINING

Grooving Tool Holders GND Type

MFH-RAPT R High Feed Milling Cutter

End Mills with Coolant Through using 15 Positive Inserts for Profiling & Contouring. Remember to use COPASLIP anti-seize compound on all insert screws

Carbide Burrs and Steel Brushes

VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions

KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off

KGD for Automatic Lathe

"IMCO" SOLID CARBIDE CUTTING TOOLS - USA

TAPS AND DIES. American Made American Owned

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10

Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance

Body Length (mm) New Tool Ref Length (mm)

P: F:

Tap and Drill Bit Selection Guide

High Efficiency Drilling in Various Types of Machining

SPIRAL POINT TAPS for through hole tapping

DRILLS. Technical Information for Drills. Solid Drills. Indexable Drills. Reamer. G02 KRLOY Drills G04 Available Insert

End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN

No. of Holes. Drill Dia. (in.)

Threading tools to JIS standard

Drills Jobber, R40 UNI

E R H 10 (N) - 11 (C) 1

E R H 10 (N) - 11 (C) 1

ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL

AQUA DRILL EX FLAT SERIES

Solid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified

Improved Grooving Performance with Expansive Tooling System Lineup

MASTER CATALOG SOLID END MILL PORTFOLIO.

Conversion Factors 1

KGT Series. KORLOY Grooving Tool. Multi-functional Machining with. Strong Clamping. High Productivity. Strong Clamping System

Cera-Notch Grooving and Threading System

Transcription:

KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX

KONDA TOOS Drills code key Type of Tool 1 ength Code Drills Type of Drill Tel: 00-7-211 Fax: 00-7-212 Type of Shank konda@kondagroup.com As per DIN 2 As per DIN197 1 0 Twist drill As per QJ/ZZQ(TO)01.001.002 2 Square head straight shank as per DIN Multiple functions twist drill 4 As per DIN7K Double flattened straight shank as per DIN9 4 Centering drill As per DIN9 As per DIN7 as per DINHA Step drill 7 Whistle notch shank as per DINH 7 Straight flute drill 7 As per the rule ZZC-C in QJ/ZZQ(TO)01.001.002 9 Tapered shank Deep drill As per the rule ZZC-D in QJ/ZZQ(TO)01.001.002 9 As per the rule ZZC- in QJ/ZZQ(TO)01.001.002 1 7 SU 0 C -00 Identification of drilling depth Geometry www.kondagroup.com 1 Mode of cooling SU Twist drill for general purpose 0 (2~) d C S Deep twist drills 0 (4~) d Default xternal coolant ST Twist drill for soft steel, stainless steel 0 (7~) d PC Straight flute drill for aluminium, cast iron () d 1 (1) d Specification Normal cutting diameter 00 of stepless drill M Step drill for standard pitch M 1 Step drill for fine pitch If the tool is not a centering drill, it indicates the drilling depth s of solid carbide drills KDG0 Ultra-fine carbide substrate with strength, toughness YKF Ultra-fine grain carbide substrate with high hardness, outstanding wear resistance and long tool life. YK0F Ultra-fine carbide substrate with high strength, toughness and 02

KONDA TOOS Twist drills SU Series (General Machining Purpose) xternal coolant 1 1 KDG0 Whistle notch shank 1 SU0-00 1SU0-0 1SU0C-000 174SU0C-00 17SU0C-00 174SU0C-0 1SU0C-000 1SU0C-00 1SU0-000 SU0C-00 174SU0C-0700 17SU0C-070 1SU0C-000 1SU0C-00 SU0-0900 (m7) (I/d) (m7) (I/d) 2.0 2 SU0C- 1. 1 11 4 4 2. 2 2 1SU0C-0 1.0 1 1 4.0 72 4 29 174SU0C-1700 17.0 1 9 4. 2 17SU0C-170 17. 1 9 4 74 29 SU0-170 17. 1 7 1 4 4. 24 17 1SU0-170 17. 1 9 4.0 9 7 4 SU0C-0 1.0 1 7 1 4. 2 44 SU0C-0 1.0 1 9 4.0 2 44 174SU0C-0 1.0 1 7 1 4. 79 4 24 17SU0C-0 1.0 1 9 4 7.0 79 4 24 1SU0C-0 1.0 1 22 1 9 4 7. 91 4 SU0-1. 11 79 0.0 11 7 1SU0-1. 1 1 0. 2 9 SU0C- 1. 11 79 0 9.0 9 47 1SU0C- 1. 1 1 0 174SU0C-1900 19.0 11 79 0 9. 1 49 174SU0C-1900 19.0 1 1 0.0 1 49 SU0-190 19. 11 79 0 1SU0-190 19. 1 1 0 SU0C-190 19. 11 79 0 1SU0C-190 19. 1 1 0 174SU0C-190 19. 11 79 0 17SU0C-190 19. 1 1 0 1SU0-00.0 1 1 0 SU0C-00.0 11 79 0 1SU0C-00.0 1 1 0 174SU0C-00.0 11 79 0 17SU0C-00.0 1 1 0 1SU0-090 9. 1 49 1SU0-090 1SU0C-00 17SU0C-0. 11 4 1SU0C-10 11.0 1 99 4 1SU0C-1 11. 1 99 4 SU0-00.0 2 4 1SU0-0. 4 0 4 SU0C-0 1.0 7 0 4 4 1SU0C- 1. 4 0 4 1SU0C- 1 17 1 11 4 SU0-1. 1 11 4 4 1SU0-0 1.0 1 1 4 0

KONDA TOOS S Series (Deep-hole Machining Purpose) D/0D (m7) (I/d).0 90 0 1S0C-0700 7.0 0 272 22 2 1SC-000.0 1 70 2 1SC-000.0 9 1S0C-000.0 0 1 0 92 1SC-000.0 22 1 1.0 0 0 2 24 1SC-00 2 4 1S0C-000 1SC-00 1 9 4 1SC-0900 9.0 0 1S0C-00 0 17 1 4 1SC-0900 9.0 249 1 1SC-000.0 11 7 72 1S0C-0900 9.0 0 29 27 1SC-000.0 1 11 1SC-00.0 174 12 0.0 272 22.0 0 1 1 1SC-00 1SC-000.0 11 7 72 1S0C-00.0 0 72 2 0 1SC-000.0 1 1SC-10 11.0 4 1 4 4 1S0C-000.0 0 2 0 12 1SC-00.0 2 7 4 1SC-0700 7.0 11 9 4 1SC-0 1.0 1 194 4 1SC-000 7.0 2 4 1SC-00.0 2 2 4 ST Series (for Soft Steel, Stainless Steel) KDG0 1 1S0C-000 1 Fax: 00-7-212 Tel: 00-7-211 konda@kondagroup.com D 1SC-000 www.kondagroup.com 1 Depth (m7) (I/d) KDG0 1 Twist drills Whistle notch shank (m7) (I/d) (m7) (I/d) ST0C-000.0 2 1ST0C-00.0 1 49 1ST0C-000.0 2 2 17ST0C-00.0 1 49 17ST0C-000.0 2 2 ST0C-00.0 2 4 17ST0C-00. 2 2 1ST0C-00.0 11 4 ST0C-00 24 17 17ST0C-00.0 11 4 1ST0C-00 74 29 ST0C- 1 7 0 4 4 17ST0C-00 74 29 1ST0C- 1 4 0 4 ST0C-000.0 2 17ST0C- 1 4 0 4 1.0 1 7 1 4 1ST0C-000.0 2 44 ST0C-0 17ST0C-000.0 2 44 1ST0C-0 1.0 1 9 4 ST0C-000.0 79 41 29 17ST0C-0 1.0 9 4 1ST0C-000.0 91 4 ST0C-00.0 11 79 0 17ST0C-000.0 91 4 1ST0C-00.0 1 1 0 17ST0C-00.0 1 1 0 ST0C-00.0 9 47 04

KONDA TOOS Straight flute drills /twist drills PC Series (for Cast Iron, Al Alloy) d YKF xternal coolant 0 (m7) (I/d) (m7) (I/d) 17PC0-00.0 74 29 17PC0-10 11.0.0 11 4 17PC0-04 4.2.0 74 29 179PC1C-10 11.0 1.0 2 190 4 17PC0-000.0.0 2 44 17PC0-00.0.0 11 4 179PC1C-000.0 1.0 9 179PC1C-00.0 1.0 2 190 4 17PC0-000.0.0 2 44 17PC0-0 1.0 1 4 0 4 179PC1C-000.0 1.0 9 17PC0-1 1 4 0 4 17PC0-07.7.0 91 4 179PC1C- 1 1 1 290 2 219 4 17PC0-0700 7.0.0 91 4 17PC0-0 1.0 1.0 1 4 17PC0-000.0.0 91 4 17PC0-1. 1.0 1 4 179PC1C-000.0 1.0 17 7 17PC0-0 1.0 1.0 1 4 17PC0-00..0 1 49 17PC0-1700 17.0 1.0 9 4 17PC0-0900 9.0.0 1 49 17PC0-170 17. 1.0 9 4 179PC1C-0900 9.0 1.0 217 170 1 17PC0-0 1.0 1.0 9 4 17PPC0-00.0.0 1 49 17PC0-190 19..0 1 1 0 17PC1C-00 17PC0-2.0 1.0 217 170 1.2.0 11 4 SC Series (for Cast Iron, Al Alloy) 17PC0-00.0.0 1 1 0 11 YKF xternal coolant 1SC0-070 11SC0-070 1SC0-000 11SC0-000 1SC0-00 11SC0-00 1SC0-0900 1SC0-0900 1SC0-090 11SC0-090 1SC0-00 11SC0-00 Drill dia. (m7) Drilling depth (I/d) (m7) (I/d) 7. 7. 74 4 7. 7. 9 9.0.0 79 7.0.0 117 7.. 79 7.. 117 7 9.0 9.0 4 9.0 9.0 1 9. 9. 4 9. 9. 1.0.0 9 4.0.0 1 7 1SC0-10 11SC0-10 1SC0-00 11SC0-00 1SC0-0 11SC0-0 1SC0-11SC0-1SC0-0 11SC0-0 1SC0-0 11SC0-0 11.0 11.0 9 47 11.0 11.0 2 94.0.0 2 1.0.0 11 1 1.0 1.0 2 1 1.0 1.0 11 1 1 1 7 4 1 1 1.0 1.0 111 1.0 1.0 19 1 1.0 1.0 11 1.0 1.0 17 0 0

KONDA TOOS Short hole drills /inserts ZTD0 ØD1 ØD2 Indexable Insert Short Hole Drills ØD 1 Insert D 2 ØD1 ØD2 ZTD04 ØD 1 Insert 4D 2 ØD1 ØD2 ZTD0 ØD 1 Insert D 2 ZTD0/04/0 Applicable Inserts r ØI.C 1 11 S Ød 90 Type Basic ØI.C S Ød r 004-PM.0.0 2. 2.2 004-PM.0.0 2. 2. 07T0-PM.97 2. 090-PM 9. 9. 4. 4.2 1-PM 11. 11. 4.7 4.4 1-PM...2.7 004-M.0.0 2. 2.2 004-M.0.0 2. 2. 07T0-M.97 2. 090-M 9. 9. 4. 4.2 1-M 11. 11. 4.7 4.4 1-M...2.7 Recommended grade (always stock available) YBG (peripheral edge) YBG2 (inner edge) Available grade (always stock available) Make-to-order 0

KONDA TOOS Inserts for short hole drills ZTD0 Applicable Inserts - -PG r 7 Ød ØI.C S Type Basic ØI.C S Ød r YBG1 YBG2 WCMX00R-.. 2. 2. WCMX0R- 4.. 2..1 WCMX000R-.4.1.2 WCMX0T0R-. 9.2.97.7 WCMX004R-.7.7 4.7 4. WCMX00R-PG.. 2. 2. WCMX0R-PG 4.. 2..1 WCMX000R-PG.4.1.2 WCMX0T0R-PG. 9.2.97.7 WCMX004R-PG.7.7 4.7 4. Recommended grade (always stock available) Available grade (always stock available) Make-to-order - -PG Sharp cutting edge is beneficial to gaining low roughness surface, maily applicable for low load cutting of aluminium alloy, mild steel and cast iron. Unique design of corrugated edge ensures high edge strength and good chip breaking performance, for machining of carbon steel and alloy steel etc. 07

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback