Ultra 20 Swing Door fitting, door weight up to 20 kg Area of application: Door swings out to the front and to the side when being opened, allowing unlimited access to the cabinet interior, can be used for single doors, double doors with straight cabinet design and for corner solutions Internal cabinet width: Min. 39 or 475 mm Internal cabinet height: Max. 2,576 mm Adjustment facility: ±4 mm vertically, ±2 mm horizontally, ±4 mm tilting angle adjustment Material: Zinc alloy Finish: Powder coated silver coloured Internal drawers can be used, incl. soft close mechanism Installation dimensions Internal cabinet width B = Top and bottom door overlay A = Lateral door overlay Single door Corner solution with double door Door opening mechanism Connecting bar FF.106
Door opening mechanism Supplied with 2 Handed fittings for fixing to cabinet ceiling and floor 2 Door mounting brackets Version Carcase width Max. door travel mm Without Min. 39 mm 450 407.32.901 Soft Close Min. 475 mm 600 407.32.902 With Soft Close Packing: 1 pc. Min. 39 mm 450 407.32.906 Min. 475 mm 600 407.32.907 Fitting set for aluminium framed door Area of application For connecting to aluminium framed doors 407.32.920 Centre hinge Area of application Stabilize the door and prevent bending 407.32.930 Packing: 1 pc. Connecting bar Version: Can be cut down to size Correct size of connecting bar is installation height - 76 mm Length mm 2,500 407.32.910 Packing: 1 pc. FF.107
Ultra 50 Swing Door opening mechanism, door weight up to 50 kg Area of application: For large cabinet and connecting doors Internal cabinet width: 70 1,10 mm Adjustment facility: ±2 mm vertically, mm horizontally at bottom, ±15 mm tilting angle adjustment at top Material: Aluminium Finish: Powder coated With soft closing mechanism. Inset drawers can be used. Installation dimensions Type Dim. A mm Dim. B mm Dim. C mm Dim. D mm Motion V1 460.5 42.5 62.5 466.0 Motion V2 515.0 43.0 63.0 500.5 Motion V3 613.0 51.0 66.5 59.5 Type Dim. E mm Dim. F mm Dim. G mm Dim. H mm Motion V1 70-0 1.0 155.0 405.0 Motion V2 0-90 930.0 460.0 Motion V3 90-1,10 1,127.0 10.0 560.0 Application Type Intern. cabinet width mm Door weight kg Motion V1 70-0 50 407.33.501 Motion V2 0-90 407.33.502 Motion V3 90-1,10 40 407.33.503 Synchronising bar Material Finish Steel Chrome plated 407.33.510 Packing: 1 pc. FF.10
Eclipse Ex Pivot sliding door fitting Material: Steel Finish: Galvanized Door thickness: Max. 32 mm Door height: Max. 711 mm Max. pocket width: - for hinge Ø35 mm: 45 mm, tab mm (door thickness 16 20 mm, mounting plate H = 4 mm) - for hinge Ø40 mm: 57 mm, tab 14 mm (door thickness 20 32 mm, mounting plate H = 6 mm) Version: 2-side ball bearing slide with hinge and mounting plate, suitable for cabinet of TV or sound system or bar, for light weight sliding door Backset = Door thickness + 6 mm Wood follower (made by customer) Thickness: 12 mm Supplied with 1 Pocket door slide set 2 Inset hinges 2 Mounting plates 4 Screws for hinge 4 Screws for mounting plate Min. pocket width Length mm 300 40.31.331 350 40.31.336 400 40.31.341 450 40.31.346 500 40.31.351 550 40.31.356 600 40.31.361 Backset Door thickness FF.109
Eclipse 16 IF/VF, door weight up to 16 kg Guide Cruciform mounting plate Door height: Max. 1,500 mm Door thicknesses: 16 32 mm for Infront, 19 22 mm for Vorfront Push-in depth: Max. 230 550 mm Material: Steel guide and cord, plastic guide roller Finish: Black galvanized guide, black plastic sleeved cord Installation: Screwing in 32 mm series drilled holes Concealed hinge Cord Door stop Fixing Screws Installation dimensions Application Mount guides directly to top or base of cabinet. FF.110
Cord tension adjustment Adjust door height and cord tension by rotating the adjusting screw. Length of guide Push-in depth Set components Guide Cord with adjusting screw Set of installation instructions For 1 door 1 pair. 2 pcs. 1 pc. Guide length mm Max. possible push-indepth mm 340 230 40.25.335 40 294 40.25.340 440 326 40.25.345 504 390 40.25.350 536 422 40.25.355 600 46 40.25.360 664 550 40.25.365 Order reference Please order door fixing set separately. Suitable hinges you will find in Section 3 of this catalogue. FF.111
Hawa Concepta Features: Pivot/slide timber or glass doors for furniture and room partitioning solutions, unique scissor technology accommodates large and heavy doors, adjustments are made from the front, all components are fixed on to the intermediate panel, can be used in left or right handed applications Door height: 1,250 1,50 mm for Concepta 25, 1,51 2,500 mm for Concepta 30, 1,900 2,50 mm for Concepta 50 Door width: 300 900 mm Door thickness: Timber doors 19 50 mm Door thickness: Glass doors mm toughened glass Installation dimensions Pivot/slide-in doors made of wood and glass for furniture and room partitioning solutions Unique scissor technology accommodates large and heavy doors Adjustments are made from the front All components are screwed onto the intermediate panel Wall recesses can be concealed without a cabinet body The same set can be used for left and right hand side applications TH = Internal carcase height T = TB - M + 73 mm E = T - 73 mm T = Maximum installation depth for mounting the fitting from the inner side of the closed door to the rear edge of the fitting Max. T mm TH mm Max. E mm HAWA Concepta 25 650 1,250 1,50 577 HAWA Concepta 30 900 1,51 2,500 27 HAWA Concepta 50 1,900 2,50 FF.112
Design option: Infront cabinet door HAWA Concepta 25/30/50 can be used for the standard designs of the furniture industry. Design option: Forefront cabinet door An optional connecting bracket allows designs with timber and glass doors resting against the top and bottom cabinet sections. System: HAWA Concepta 25/30 Variant: Timber System: HAWA Concepta 25/30 Variant: Glass System: HAWA Concepta 25/30 Variant: Timber System: HAWA Concepta 25/30 Variant: Glass FF.113
Design option: Door in wall recess HAWA Concepta 25/30/50 can also conceal wall recesses without a cabinet body. Timber doors from 30 mm Rebates enable the installation of timber doors with thicknesses greater than 30 mm. S mm N1 mm N2 mm N3 mm N4 mm 20 30 55 0 0 0 33 5 3 3 36 63 2 6 5 39 67 3 9 42 70 12 11 45 75 5 15 14 4 79 6 1 17 50 3 7 21 19 Design variant: Room partitioning solutions Room-high designs for partitioning solutions are possible as the HA- WA Concepta 25/30/50 does not require top and bottom cabinet sections. All components are fixed to the intermediate panel. System: HAWA Concepta 50 Variant: timber System: HAWA Concepta 50 Variant: glass System: HAWA Concepta 25/30 Variant: timber System: HAWA Concepta 25/30 Variant: glass FF.114
HAWA Concepta 25 Pivot sliding door fitting HAWA Concepta 30 Pivot sliding door fitting Max. door weight: 25 kg Door height: 1,250 1,50 mm Door type Fitting set Timber 40.30.000 Glass 40.30.010 Max. door weight: 30 kg Door height: 1,51 2,500 mm Door type Fitting set Timber 40.30.001 Glass 40.30.011 Door weight/height ratio The maximum door weight must be adjusted in accordance with the size of the doors. Door weight/height ratio The maximum door weight must be adjusted in accordance with the size of the doors. Door weight in Kg / TB = Door width in mm / TH = Door height in mm Door weight in Kg / TB = Door width in mm / TH = Door height in mm FF.115
HAWA Concepta 50 Pivot sliding door fitting Max. door weight: 50 kg Door height: 1,900 2,50 mm Accessories Cover strip, aluminium anodized, incl. cover caps and self adhesive tape Length mm 1,50 40.30.901 2,500 40.30.902 2,50 40.30.903 Door type Fitting set Timber 40.30.002 Glass 40.30.012 Frame profile, aluminium anodised, incl. cover caps, rubber glazing seal and white fabric seal 1,50 40.30.911 2,500 40.30.912 2,50 40.30.913 Door weight/height ratio The maximum door weight must be adjusted in accordance with the size of the doors. Decor discs for glass patch fixings, aluminium anodized, set of 3 pcs. 40.30.100 Glass solutions Decor discs Cover strip Frame profile 40.30.100 Type 1 40.30.901 40.30.902 40.30.903 Type 2 Door weight in Kg / TB = Door width in mm / TH = Door height in mm Type 3 Type 4 40.30.901 40.30.911 40.30.902 40.30.912 40.30.903 40.30.913 40.30.100 40.30.911 40.30.912 40.30.913 FF.116
Bracket for connection to the external side of cabinet body Connecting bracket for external or cabinet body connections, 600 mm, aluminium anodised, predrilled, with fixing screws 40.30.090 Glass cutouts for pivot/slide-in door Only toughened saftey glass may be used. All glass edges are bevelled; maximum 1 mm in the glass cutout. Glass solutions The new modular frameless glass system offers freedom of design with form-fitting and totally safe glass fastening. The decor discs, cover strip and frame profile allow for four different types of designs. Type 1 Type 2 Type 3 Type 4 FF.117
Door handles for glass and timber doors The vertical frame profile for glass solution types 3 and 4 can accommodate integrated door handles 40.30.990, 40.30.991 and 40.30.993. The door handle 40.30.90 is available for glass solution types 1 and 2 and for timber doors with a thickness of 20 mm. Door handle height The height of the door handle should be determined accordingly if two cabinet elements are designed so that the door opening of one cabinet meets with the insert of the adjacent cabinet. We recommend shell handles or flush pull handles. Door handle for glass door thickness mm and timber door thickness 20 mm, aluminium anodised Door handle profile for glass door frame profile, aluminium anodised Length mm 400 40.30.90 400 40.30.990 1,260 40.30.991 2,50 40.30.993 N5 = Max. door handle height for adjacent cabinets Toughened safety glass doors Max. door thickness mm N5 mm 13.5 40.30.90 Timber doors 20 13.5 40.30.990 22 10.0 25 5.0 50 2.0 FF.11