HS-PORTAL 300 LM Lift and slide hardware for aluminium doors Hardware information for profile manufacturers... with the following benefits: with integrated night vent profile cylinder accessories secure due to 4 locking points on the drive gear fixed wheels allow simple and easy assembly smooth operation even on heavier sashes _3_2005-01/0 gedruckt auf chlorfrei gebleichtem Papier Size range Sash width (mm) profile dependent max. 3350 Sash height (Sliding sash) (mm) profile dependent max. 2675 Frame width (mm) with scheme A max. 6700 Frame height (mm) depends on profile system Sash weight (kg) max. 300 Backset (Gear) (mm) 37,5 Handle position (Window) (mm) from top edge running rail 395 Handle position (Door) (mm) from top edge running rail 995 Contents Size range...page 1 Fittings layout...page 2 Parts list...page 3 Profile dependent measurements...page 4 Accessories...Page 5 Fitting detail(i)...page 6 Fitting detail(ii)...page 7 Scheme Options...Page Specifics on scheme C...Page 9 Jigs...Page Assembly instruction 2005-01 Page 1
Fittings layout HS-PORTAL 300 LM Hardware Layout Fittings layout 21 15 6 6 14 1 Handle Si-line HS 250 internal 2 Rose Si-line HS 250 internal 3 Cover cap Si-line HS 250 4 Corner drive VSU 5 Bogies 6 Top locking bolt Exec..... 7 Bottom locking bolt Exec.... Packer 9 Bottom distance block Exec... Distance piece short Exec... 11 Countersunk screw M5 x 13 12 Closing cap 13 Countersunk screw M5 x 40 14 Sleevenut 15 Stop 16 Dowel pin 6 x 16 2 13 1 17 Stop 1 Countersunk tapping screw B4, x 70 12 19 Bottom locking part Scheme G 20 Countersunk screw M6 x 20 21 Oval head counters.screw B6,3 x 3 6 22 Connecting rod 23 Gear HS-Portal 300 PZ 7 3 w/o picture: Fixing screw B4, (corresp. DIN 792) or M5 (corresp. DIN 965) made of stainless steel, delivery depends on profile system. 15 9 22 17 1 11 22 20 19 4 16 16 5 Flexible by optimized packing units Handle Si-line HS 250 internal (1) and Cover cap Si-line HS 250(3) available in white RAL 9016 silver si-brown Basic parts (4 to16) in Carton HS-Portal 300 LM (profile dependent) Sash width dependent connecting rod size 150 to 335 (22) Sash height dependent Gear HS-Portal 300 PZ size170, 220 and 260 (23) Page 2
Parts list HS-PORTAL 300 LM Hardware Parts list Pos. Qty A D G C F Materialshorttext RAL9016 white Materialnumber silver Si-brown always required Carton Handle Si-line HS 250 A0156 1 2 1 2 4 internal 1 1 2 1 2 4 Handle Si-line HS 250 internal A0156 2 Rose Si-line HS 250 internal 3 1 2 1 2 4 Cover cap Si-line HS 250 1 2 1 2 4 Carton HS-PORTAL 300 LM consisting of : 267226 267219 267240 A...... 4 1 2 1 2 4 Corner drive VSU HS PEUB00-00 5 1 2 1 2 4 Bogies HS PLWB0020-00 1 2 1) 1 1) 3 1) Bag Locking parts HS-LM A... 6 1 2 1) 1 1) 3 1) Top locking parts A... air gap dependent See page 7 7 1 2 1) 1 1) 3 1) Bottom locking parts A... air gap dependent See page 7 Packer 1 mm / 2 mm airgap dependent See page 7 1 2 1 2 4 Bag sash parts HS-LM A... 9 1 2 1 2 4 Lower distance block A... profile dependent See page 7 16 16 32 Distance piece short A... profile dependent See page 7 11 1 2 1 2 4 Countersunk screw M5 x 13 0050 1 2 1 2 4 Closing cap grey 1970 12 1 2 1 2 4 Closing cap brown 1969 13 2 4 2 4 Countersunk screw M5 x 40 04 14 2 4 2 4 Sleeve nut 0027 15 2 4 1) 4 1) Stop 24412 1 2 1 2 4 Bag screws HS-LM A... 16 2 4 2 4 Dowel pin 6 x 16 23132 1 1 2 Screws Bag Stop consisting of: profile dependent 21237 60649 31922 17 1 1 2 Stop 0012 604 559 1 1 1 2 Countersunk tap. screwb4, x70 44090 44090 44090 1 1 1 Bag locking parts HS consisting of: Scheme G 23691 19 1 1 1 Locking part bottom Scheme G 4272 20 1 1 1 Countersunk screw M6 x 20 429 21 1 1 1 Pan head tap. screw B6,3 x 3 4296 sash width dep. 22 1 2 1 2 4 Connecting rod Size Length (in mm) FB (in mm) 150 9 720 to 1500 200 139 1501 to 2000 250 19 2001 to 2500 335 274 2501 to 3350 71922 71940 719497 719725 sash height dep. Accessories 23 1 2 1 2 4 Gear HS-PORTAL 300 PZ Size Handle pos. (in mm) FH (in mm) 170 1190 to 1790 220 1791 to 2290 260 2291 to 2690 PGKB00-5240 PGKB0020-5240 PGKB0030-5240 PGKB00-5240 PGKB0020-5240 PGKB0030-5240 PGKB00-5320 PGKB0020-5320 PGKB0030-5320 Accessories 24 0..1 0..2 0..1 0..2 0..4 Finger pullsi-line long 069 03 5239 25 0..1 0..2 0..1 0..2 0..4 Rose Si-line outwards long 1569 Handle Si-line HS 250, 26 0..1 0..2 0..1 0..2 0..4 only in conn. with internal rose 91735 detachable 2) 27 0..1 0..2 0..1 0..2 0..4 Rose Si-line internal only in conn. with detachable handle 1613 1) Actual need; delivery contains further parts. 2) Color RAL 9003 white Page 3
Profile dependent measurements HS-PORTAL 300 LM Hardware information Profile dependent measurements Distance block () and Distance piece, short(11) 11 DIM F (mm) Execution Distance block Distance pc, short 16 A0001 62711 PDZB0040-0960 1 A0020 634.2341.5021.A0 PDZB0050-0960 20 A0029 56000 PDZB0060-0960 23 A0007 55997 PDZB0070-0960 25 A0004 56161 PDZB000-0960 27 A000 6322 PDZB00-0960 30 A0006 57465 PDZB01-0960 31 A001 97577 PDZB0120-0960 32 A0015 49200 PDZB0130-0960 35 A0002 59049 PDZB0140-0960 Locking bolts (7 and ) 7 DIM E 1) (mm) Execution Top locking bolt Bottom locking bolt 4 A0012 71939 719404 7 A0020 719305 719312 A0001 719190 634.234.5004X60,5 A0005 719206 719220 9 A0006 719213 719237 14 A0009 719329 719343 16 A0013 719244 71926 19,5 A0002 722220 719299 20 A0004 719251 722534 Cross section A-B E 22 groove size 13 +0,2 37,5 F groove size 22 +0,2 1) intermediate sizes using packers of 1 mm and 2 mm possible Packers (9) for locking bolts 9 1 mm 72125 2 mm 721292 Cross section C-D groove size 22 +0,2 5 42 min. 55 mm cam Ø12/9,5 mm long (also available without cam) 5 Page 4
Accessories HS-PORTAL 300 LM Hardware informtation Accessories Handle Si-line HS 250 PZ A0156 internal and external locking 4 2b cam Ø12/13 mm long 3a 2 1a min. 55 mm max. 5 mm 3a cam Ø12/9,5 mm long 37,5 14,5 19 20 Pos. Pcs per scheme A D G C F Description RAL9016 white silver si-brown 1 2 1..2 3..4 Handle Si-line HS 250-PZ internal (only in conn. with Si-line HS 250-PZ external) consisting of : A0156 i. +. ex. locking 1a 1 2 1..2 3..4 Handle Si-line HS 250 PZ internal A0156 2 1 2 1..2 3..4 Rose Si-line internal 272725 267264 267271 3a 2 2 2..4 6.. Cover cap Si-line HS 250 49 76602 76633 Handle Si-line HS 250-PZ external A0156 272749 272732 272756 1 2 1..2 3..4 (only in conn. with Si-line HS 250-PZ internal) consisting of : i. +. ex. locking 4 1 2 1..2 3..4 Handle Si-line HS 250 PZ external A0156 2b 1 2 1..2 3..4 Rose Si-line external 3a 2 2 2..4 6.. Cover cap Si-line HS 250 49 76602 76633 1 2 1..2 3..4 Bag Stop 21237 60649 21244 19 1 2 1..2 3..4 Stop 20 1 2 1..2 3..4 Countersunk tap. screw B4, x 70 Page 5
Fitting detail(i) Fitting detail(ii) HS-PORTAL 300 LM Hardware information Fitting detail(i) HS-PORTAL 300 LM Hardware information Fitting detail(ii) Sash cover plate (profile dependent) Size x =profile dependent 15 Ø 12 mm ca. 200 250 C 1) B 1) A upper edge running rail 52 52 52 52 A handle pos. from upper edge running rail 395 (windows) 995 (doors) B Cross section drawing A B see page 7 52 Gearbox 0 6 mark for handle position 0 69 16 Cross section drawing C D see page 7 C 51 x Distance bar to be mounted on site Ø 12 mm Ø 20 mm with HSS-Bi-Metal-keyhole saw for lower cylinder drilling please fix here with Ø 12-drill Stop (15) Stop (15) Ø 12 mm ca. 200 D Gear Size A Size B 1) Size C 1) Sash height 2) Sz 170 00 600 1175-1775 Sz 220 1600 1200 750 1776-2275 Sz 260 2200 1200 750 2276-2675 1) If requested 2 pcs top locking bolts (6) can be used as additional centre lock. The locking points on Gear HS-Portal 300 PZ (23) must be opened. 2) Small deviations possible (profile dependent) Page 6 Page 7
Scheme Options HS-PORTAL 300 LM Hardware information Scheme Options left hand or right hand Scheme A Scheme D Scheme G Scheme H Scheme C Scheme F Scheme K Page
Specifics on scheme C HS-PORTAL 300 LM Hardware Information Specifics on scheme C M 5 x 70 2. 1. 2. 1. Bottom locking part, scheme G Notes for Scheme C: - The locking points are lowered by 4mm Reduce Dim A to C on page 14 by 4 mm - screw a self tapping screw B6,3 x 3 (21) into the frame ~ 50 mm from the sash leading edge above the slave sash [see also page 9] - To avoid misoperation of the two leaves, the master and slave sashes should be clearly identified. The sliding doors should only be operated in the following sequence! Opening: first the master [1.], then the slave sash [2.] Closing: first the slave sah l [2.], and then the master[1.] Ø 5,2 mm 25 Gear front edge Fitting the locking parts, Scheme G A Mark the running rail 25 mm behind the gear front edge and ctr punch for a csk screw M6 x 20 (20). B Pre drill with a Ø 5,2 mm drill. C Screw in the locking part for Scheme G (19). Page 9
Jigs HS-PORTAL 300 LM Hardware information Jigs Materialshorttext Tool Materialnumber Jig EB 651-3 Consisting of: for gear drillings 1 Pos. 1 Jig EB 651-3* Jig has backset 51; According to profile dependent backset please use distance piece on site Drill : Ø 12 mm Ø 20 mm PABB00-52 2 Pos. 2 Adjusting rod (incl. lower stop ) for EB 650-3 and EB 651-3 157244 Centre punch KF for ctr punching the hole for the locking part 14192 SIEGENIA-AUBI KG - Hardware and Ventilation Technology P.O. Box 05 51-57005 Siegen - Germany Phone +49 (0)271 3931-0 - Fax +49 (0)271 3931-333 Page