VERTICL LINDS ND CONSERVTORY WNINGS safe timeless beautiful markilux 760 / 860 The vertical cassette blind with guide tracks and tensioning system that gives excellent cover tension and has an elegant, refined appearance rated to wind resistance class 3 (corresponds to eaufort 6) www.markilux.com markilux
markilux 760 / 860 VERTICL LINDS ND CONSERVTORY WNINGS side view markilux 760 side view markilux 860 square cassette markilux 760 round cassette markilux 860 reveal fixture square cassette markilux 760 reveal fixture round cassette markilux 860 cover profile to block the gap between cover and track (optional) decorative cap for track bracket (optional) unit when closed Design Features Technical Specification Optional ccessories the tensioned vertical blind; complete protection from the sun, wind and prying eyes the markilux 760: compact, square and discreet, the cassette profile made of extruded aluminium is only 95 mm in height stand-off fixture from the façade; this embellishes the building still further for long-lasting attractiveness the blind has been powder coated when closed the blind cover is protected from the weather by the fully encompassing cassette the blind cover is guided along sturdy, aluminium guide rails robust, self-supporting cassette made of extruded aluminium extremely sturdy, stainless steel side cheek, sheathed in plastic and powder coated special vario-belts ensure optimum cover tension when the blind is completely extended operation by means of a smooth gearbox and universal joint hard-wired motor operation (optionally with automatic weather controls) for straightforward and easy operation radio-controlled motor with radio remote control for ease of use an easily installed, radio control light and wind sensor guarantees comfort and a degree of safety even in your absence the markilux PVC window for the markilux 860 for covers in acrylic or sunsilk fabric 64 Special features www.markilux.com
markilux 760 / 860 VERTIC L LINDS ND CONSERVTORY WNINGS Dimensions and configuration options 01 75 62 75 0 76 0 125 1 125 165 126 165 5 166 5 245 6 245 overall width motor operation +5 overall width manual operation +8 02 min. 285 246 285 325 286 325 3 326 3 375 351 375 0 376 0 03 04 433 06 0 0 H 05 2 58.5 300 76 3 1) 0 1) 1) from a unit height of 301 cm, 3 track brackets will be supplied 2 3 dimensions in cm 07 08 09 11 Operation / Drive unit standard winding handle operation hard-wired motor io radio-controlled motor radio-controlled motor (433 Hz) 12 Covers fabric range no. optional sunsilk snc 324 xx / 328 xx / 369 xx 2) sunvas snc 3 xx / 311 xx 313 xx 3 xx 2) sunsilk perla FR standard optional 374 xx 14 3) 4) transolair 338 xx perfotex 332 xx vuscreen LU 317 xx 5) vuscreen FR 318 xx 5) sunvas perla 370 xx 3) 3) 2) in the case of the markilux 760 up to a maximum unit height iscellaneous of 300 cm; from a unit height of 301 cm only sunvas standard optional oversized material is possible; from a certain size the cover will be made with horizontal panels light and wind sensor 3) in the case of the markilux 760 up to a maximum unit height cover profiles for gap between side rails and cover 4) depending on the width and unit height with bonded markilux PVC windows of 2 cm 6) horizontal seam 5) up to a unit height of 2 cm 6) only the markilux 860 with a cover made from sunsilk or sunvas is possible; see Optional ccessories hard-wired motor 2 no. of brackets per track www.markilux.com 433 radio-controlled motor (433 Hz) fixture width / order width min. minimum fixture width H 13 unit height Dimensions and configuration options 65 16 17 18 19 21
markilux 760 / 860 VERTICL LINDS ND CONSERVTORY WNINGS Frame colours standard optional dditional information The width of the blind cover is always less than that of the blind. traffic white RL 9016 metallic aluminium RL 9006 Standard manual operation with bayonet fitting and universal joint made of stainless steel is operated from outside the building (winding handle lengths 1, 1, 160, 1 or 2 cm). grey brown, similar to RL 19 non-standard powder-coated finish In the case of manual operation it takes approximately 24 turns per metre of overall unit height to extend the system. Colours similar to those in the RL chart. Colours may differ slightly from those depicted in both hue and finish. In the case of motor operation the blind will take approx. seconds per metre to extend. Dimensions and tolerances housing tolerances blind cover width blind fixture width width + 5 / mm 0 mm blind cover length unit height drop 760 860 95 mm 5 mm N.! If the motor is used continuously it will stop automatically after 3 to 4 minutes to prevent overheating. In the case of a bank of blinds operating simultaneously, the same speed of rotation of the motors cannot be guaranteed because of the internal tolerances of the motors. This model is only available as a single unit. Depending on the size of the blind, deflection may be in evidence in individual profiles and sections of profile which is completely unavoidable. This affects neither the functionality nor the durability of the blind. 66 Frame colours / Dimensions and tolerances / dditional information www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 760 / 860 Fixtures, fittings and accessories markilux 760 / 860 33 6, 24 fixture type, flat track bracket fixture type track bracket mm fixture type 21 track bracket 0 mm 01 02 03 04 78451. 78538. 05 fixture type 22 track bracket track bracket 00 mm double flat track bracket 2 single units 06 07 78539. 1 mm double track bracket mm 2 single units 785. double track bracket 0 mm 2 single units 78671. double track bracket 1 mm 2 single units 08 09 11 78654. 78658. 78683. 12 78685. 787. double track bracket mm 2 single units fixture type additional angled bracket gearbox side mm (fixture between beams, walls etc.) please order additional accessories 787211! 787211. footprint dimensions of adjustable track bracket fixture type accessories for two angled brackets 78719. or 787. 78719. 76603. fixture type additional angled bracket bearing / motor side mm (fixture between beams, walls etc.) please order additional accessories 787211! decorative cap for track bracket to be used with: 781., 786., 794., 78247., 78451., 78538., 78543., 78454., 78663. 13 14 16 17 18 19 76604. decorative cap for track bracket to be used with: 782., 787., 795., 785., 787., 788., 78251., 78539., 785., 78545., 78665., 78664., 78685. 78999. gap cover profile 44 79900. 70 adhesive plate for gap cover profile 78999. 21 reducing bolt 6 / SW 13 30 mm length refer to the section Technical Information bracket for fixture of flat track bracket, to the markilux syncra 2 for fixture types and bracket for fixture of flat track bracket, to the markilux pergola for fixture types and 753211 726. 723.. insert RL colour code no. www.markilux.com Fixtures, fittings and accessories 67
markilux 760 / 860 VERTICL LINDS ND CONSERVTORY WNINGS Fixture combinations / Fixture types ll brackets incur a surcharge Fixture type * Fixture type * 78719. Fixture type * 78451. Fixture type 21* 78538. 0 Fixture type 22* 78539. * from a unit height of 301 cm, 3 brackets per track Individual bracket combinations see Fixtures, fittings and accessories. Please note the minimum quantity required for the width and unit height you intend to order! 1 68 Fixture combinations / Fixture types www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 760 / 860 Fitting of the gap cover profile to block the gap between cover and tracks (optional) Example in the case of the square cassette 01 02 03 04 05 06 07 79900. 08 Cross section of gap cover profile 78999. 78999. 09 11 12 13 14 16 17 18 19 21 78999. 79900. gap cover profile adhesive plate for gap cover profile 78999. www.markilux.com Fitting of the gap cover profile to block the gap between cover and tracks 69
markilux 760 / 860 VERTICL LINDS ND CONSERVTORY WNINGS Dimension overview and installation markilux 760 Dimension overview min 170 max. 300 95 T 25 55 [25] 95 7 165 T H H U IN min. 130 max. 0 34 34 FH 60 Face fixture HH F 95 T+ T P:, 21, 22 P: min. 170 max. 300 163 95 7 1 85 12,5 H H T T U IN HH FH F HT P [ ] overall unit height order height drop H + 60 mm end cap overhang drop depth overall blind width blind fixture width fixture width order width cover width exterior interior fixture bracket height façade height façade width fixture bracket fixture type HH dimensions in the case of motor operation 12,5 8 6 P 21 22 HT 78451. 78538. 78539. HH mm mm 0 mm 1 mm T 3 mm 168 mm 188 mm 228 mm 70 Dimension overview / Installation methods www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 760 / 860 Installation markilux 760 Reveal fixture for gearbox or motor (fixture type ) 8 8 1 95 min. 170 max. 300 min. 130 max. 0 H 25,60 55 [25] T 78719. 787. [78719.] S 60 [] 01 02 03 04 05 06 07 08 09 N 78719. 787. 11 12 13 30 60 60 14 Cable exit point in the case of motor-driven units 14 16 48 48 17 18 19 21 H overall unit height order height N reveal width drop H + 60 mm end cap overhang S operation side overall blind width [ ] dimensions in the case of motor operation blind fixture width fixture width order width 78719. additional angled bracket bearing / motor side T cover width 787. additional angled bracket gearbox side www.markilux.com Dimension overview / Installation methods 71
markilux 760 / 860 VERTICL LINDS ND CONSERVTORY WNINGS Installation markilux 860 Dimension overview 3 1 T 25 55 [25] H 60 H min. 170 max. 300 min. 130 max. 0 118 U 1 IN T 34 34 FH 183 HH min. F min. Face fixture 2 T+ T 1 P:, 21, 22 P: 183 min. 170 max. 300 117 1 12,5 HH 1 12,5 85 8 6 P 21 22 HT 78451. 78538. 78539. HH mm mm 0 mm 1 mm T 1 mm 185 mm 5 mm 245 mm H H T T overall unit height order height drop H + 60 mm end cap overhang drop depth overall blind width blind fixture width fixture width order width cover width U IN HH FH F HT P exterior interior fixture bracket height façade height façade width fixture bracket fixture type [ ] dimensions in the case of motor operation 72 Dimension overview / Installation methods www.markilux.com
VERTICL LINDS ND CONSERVTORY WNINGS markilux 760 / 860 Installation markilux 860 01 Reveal fixture for gearbox or motor (fixture type ) 128 1 13 25 55 [25] 02 03 8 min. 170 max. 300 T S 04 05 06 8 min. 130 max. 0 H 78719. 787. [78719.] 60 [] 07 08 09 N 78719. 787. 11 12 13 30 60 60 14 Cable exit point in the case of motor-driven units 13 23 16 17 3 18 19 21 H overall unit height order height N reveal width drop H + 60 mm end cap overhang S operation side overall blind width [ ] dimensions in the case of motor operation blind fixture width fixture width order width 78719. additional angled bracket bearing / motor side T cover width 787. additional angled bracket gearbox side www.markilux.com Installation methods 73
markilux 760 / 860 VERTICL LINDS ND CONSERVTORY WNINGS Installation of the markilux 760 / 860 to the markilux syncra 2 Dimension overview markilux 860 P: 726. 726. min. 130 min. 170 max. 0 max. 300 726. S-254 [ S-224] S S S S [ ] in the case of motor-driven blinds (manual operation with a gearbox is standard) S 60 [30] operation side P fixture type detail of fixture type 2 detail of fixture type blind 726. fixture width fixture width order width P: P: P: 1 124 [112] 2 25 25 S S S S-254 [ S-224] S 787. [78719.] S fixture width, support post markilux syncra 2 overall blind width + mm [ mm] 726. bracket for fixture of the universal fixture bracket 78758. to the support post of the markilux syncra 2 flat track bracket (fixture type and ) 78719. additional angled bracket, bearing / gearbox / motor side (fixture type ) 787. additional angled bracket for gearbox side (fixture type ) 1 74 Installation of the markilux 760 / 860 to the markilux syncra 2 www.markilux.com P: 726. P: 60 [30] 726. 1 124 [112] 2 726. 60 [30] 726. 1 124 [112] 2 787. [78719.] 1 2 2 787. [78719.] 1
VERTICL LINDS ND CONSERVTORY WNINGS markilux 760 / 860 5 Installation of the markilux 760 / 860 to the markilux pergola 1 / 2 Dimension overview markilux 860 [ ] S P S 723. P: 723. + 723. S S 182 [2] + in the case of motor-driven blinds (manual operation with a gearbox is standard) operation side S fixture type 723. detail of fixture type detail of fixture 6 type [76] [787.] blind fixture width fixture width order width 78719. fixture width, support post markilux pergola 1 / 2 P: S S S P: min. 2 max. 300 min. 0 max.0 25 P: + S P: S S S P: S 182 [2] + 723. overall blind width + mm [ mm] bracket for fixture of the universal fixture bracket 78758. to the support post of the markilux pergola 1 / 2 78719. flat track bracket (fixture type and ) additional angled bracket, bearing / gearbox / motor side (fixture type ) 787. additional angled bracket for gearbox side (fixture type ) www.markilux.com Installation of the markilux 760 / 860 to the markilux pergola 1 / 2 75 46 Ø 70 60 [30] S 46 Ø 70 66 723. 723. [787.] 78719. S S Ø 70 6 [76] 46 60 [30] 46 Ø 70 66 723. 723. [787.] 78719. 01 02 03 04 05 06 07 S 08 09 S 11 12 13 14 16 17 18 19 21
markilux 760 / 860 VERTICL LINDS ND CONSERVTORY WNINGS 76 www.markilux.com