DRAWER RUNNERS Drawer Runners FGV Drawer Runners Cabx DRAWER RUNNERS Specifications Specifications and design subject and design to change subject without to change notice without All dimensions notice All in dimensions millimetres in (nominal) millimetres (nominal) Page 125
DRAWER RUNNERS - FGV A premium worldwide brand associated with Roco Fittings for the past 25 years. FGV is built on quality & reliability. Front drilling & dimensions Ten drawer and front 5.5attachments 98 2 7.5 +0.5 34 18.5 +0.5-88 8 33 15.5 +0 X = BOTTOM PANEL WIDTH X=(-79) - 1 = INTERNAL CABINET WIDTH DRAWER RUNNER IT DRAWER RUNNER IT WITH GALLERY RAIL Z = BOTTOM PANEL LENGTH (H95) FGV TEN (H200) FGV TEN Double wall steel 247drawer height 90mm, Code Description Packing epoxy R58XEAF135X nish with strong mmdesign features R58XEAGF135X mm 58.X0A0.**.25.0A000 53 Left and right drawer side 250 and R58XEAF140X state-of-the-art technology R58XEAGF140X 250 58.X0A0.**.27.0A000 Left and right drawer side 270 R58XEAF145X R58XEAGF145X *DYNAMIC LOAD Bene ts for the industry 272 R58XEAF150X Large range of depth from 250 to 550 mm R58XEAGF150X standard 58.X0A0.**.35.0A000 Left and right drawer side All steel front xing mechanism for strong TESTED TO 120,000 CYCLES R58XEAF155X 550mm R58XEAGF155X 58.X0A0.**.40.0A000 Left and right drawer side 400 and secure xing 270 Slides dimensions & drilling position Straight front presentation and tolerant self-attracting 58.X0A0.**.45.0A000 Left and right drawer side feature 347 3-D front adjustment in the front xing mechanism 58.X0A0.**.50.0A000 Left and right drawer side 500 Steel slide xing for high slam-open resistance and transport safety 58.X0A0.**.55.0A000 Left and right drawer side 550 Bottom xing via ClawFix or screws without ** colour codes: F1 = Polar White / S6 = Silver Champagne / A6 = Grey. 397 processing on the panel packing composed by: 1 box with 10 right sides and 10 cover caps; 1 box with 10 left sides Bottom panel and back panel with identical and 10 covers caps. dimensions Boomerang and individual kits on request. 16 Decorative 400 ush side cap with possibility of customisation 447 58.AX10.07.0000000 Z Set of Ten screw-on front xing 100 sets Eco-friendly boomerang packing 58.AX20.07.0000000 Drawer Set of Ten knock-in front Z xing 100 sets Bene ts for the consumer Each pack contains 100 universal front holders and 100 front holders with adjustable steel pin. 250 245.5 Three metal nishes: Polar White for clean look, 497 Silver Champagne for high end look and perfect match DRAWER Z 270 270.5 for wooden and modern nishes, standard Grey Optimised inner space thanks to straight outer face 345.5 345.5 and 500 ergonomic curved and access friendly inner face 400 395.5 400 395.5 Easy to clean thanks to hygienic 547 bottom lip and clean adjustment of every connection 445.5 445.5 GreenSilver technology for low carbon footprint 500 495.5 500 495.5 production process and 100% recycle ability 550 for reduced ecological impact 550 545.5 Front drilling & dimensions 5.5 27 Values given in mm 263 DRAWERS DRAWERS -88 Screw-on front x Cabinet depth = slide length + 3mm 34 18.5 +0.5 8 98 2 7.5 +0.5 33 X=(-79) +0-1 15.5 X = BOTTOM PANEL WIDTH = INTERNAL CABINET WIDTH Z = BOTTOM PANEL LENGTH Page 126 250 247 Specifications and design subject to change 53 without notice All dimensions in millimetres (nominal) nock-in front x for 10mm hole
Railing in epoxy nish with EasyFix on back panel/bracket 58.PX4A.**.^^.00000 and plug-in Aluminium on front front brackets pro le 10 pieces 58.PX4A..^^.00000 Crystal front pro le 10 pieces er Bene ts for the consumer Improved ** aluminium colours: space F1 management = Polar White / S6 and = Silver perfect Champagne side / A6 = Grey. doors crystal colours: 0C = crystal clear, 0M = crystal opaque, 0A = crystal ArtLine. retention RAILING Other colours for TUBES and high FOR ArtLine content INTERNAL DRAWER POLAR WHITE - FGV TEN prints on request. Elegant R58RX04F10000 solution in line with the overall design of the R58RX04F15000000 drawer Compatible with transversal railing and aps imum (page 270-271) ^^ front pro le width: 30/35/40/45/50/60/80/90/10/ (example 45 stands for cabinet width). DRAWER RUNNERS - FGV Stan FRONTAL BRACETS FOR INTERNAL DRAWER - FGV TEN R58AX4RF10000B00 ALU RAILING R58AX40F10000B00 STANDARD Standard solution Raili IN internal drawer ALUMINIUM FRONT PROFILE- FGV TEN R58PX4AF11081B00 POLAR WHITE - 1081mm Railing solution Aluminium solution Crystal solution Wood Wood 276 el side panels Aluminium solution Crystal solution SIDE PANEL - STEEL POLAR WHITE Wooden solution. Wooden panel not supplied Crystal and steel sid ume tion dapts er ns ent SIDE PANEL - STEEL POLAR WHITE - FGV TEN SIDE PANEL - CRYSTAL - WITH BRACETS R58SXMOF1 Code R58SXMOF1500 Description Packing 58.SXM0.**.45.00000 Set of steel side panel 5 sets 58.SXM0.**.50.00000 Set of steel side panel 500 5 (see setspage 295) ** SIDE colour PANEL codes: - CRYSTAL F1 = Polar - White WITH / BRACETS S6 = Silver Champagne - FGV TEN / A6 = Grey. Each pack contains 10 steel side panels. R58SXVMF1 This product needs the use of the H180 back panel (page 266-267) and the railing R58SXVMF1500 tubes (page 270-271). 58.SXV.**.45.00000 Set of crystal side panel 5 sets 58.SXV.**.50.00000 Set of crystal side panel 500 5 sets ** brackets colour codes: F1 = Polar White / S6 = Silver Champagne. crystal colours: C = crystal clear / M = crystal opaque / A = crystal ArtLine. Other colours and ArtLine prints on request. Each pack contains 5 left and 5 right crystal side panels with front brackets included. This FOR product PRIME/EXCEL/STD/TEN/UNISET needs the use of the H180 back FGV panel RUNNERS (page 266-267) and the railing tubes (page 270-271). RA0P200 JIG IN kit for 4-sided internal drawers for elegant and practical function Bene ts for the industry Available for nine standard drawer width The system hosts aluminium, crystal and wooden fronts No need for edge banding on the front of the drawer bottom panel by using crystal pro le with printed texture Every English front can be easily adapted in width to every cabinet material thickness (15, 16, 18, 19 mm) Standard Steel clip side on panel function in epoxy for ease nish of for assembly perfect volume management Design of the crystal front customisable on request Bene ts for the industry Two standard dimensions, 500 mm Bene ts for Reversible the consumer left/right for less references Easy clip-over on railing tube and magnetic retention Three metal nishes matching perfectly the drawer on the bottom nish: Polar Doesn t White, interfere Silver with Champagne front adjustment and Grey and self-adapts Very practical in height function behind turning or sliding doors Secure crystal Design versions customisable thanks on request to Safety glass High-end look thanks to elegant materials Bene ts for the consumer and perfect nishing Three metal nishes matching perfectly the drawer nish: Polar White, Silver Champagne and Grey Excellent side retention in high drawer applications IN kit for 4-sided internal high drawer for optimum space management Crystal side panel for elegant space management Bene ts Bene ts for the for industry the industry Railing in epoxy nish with EasyFix on back panel/bracket and plug-in on front brackets Specifications and design subject to change without notice All dimensions Two in standard millimetres dimensions (nominal), 500 mm Very quick assembly slide-in xing on the back Page 127 Cod 58.A 58.A 58.A ** co 58.R Code ** co rai 58.SXM 58.SXM 58.P ** colou 58.P Each pa This ^^ pro fr railing tu ** alu 58.SXV cr Othe 58.SXV ** brack crystal Other c Each pa This pro railing tu
around FGV TEN IT UNDERSIN SOLUTION on binet xif-ysae Slides xing dimensions Area to push to activate OneTouch system N650H Excel full extension 12 DRAWER RUNNER UNDERMOUNT full extension PUSHExcel TO OPEN - FGV R54N650H745P0000 it undersink application R54N650H750P0000 30 30 Excel full extension ONE-TOUCH L = EXCEL SLIDE NOMINAL LENGTH A = DRAWER DEPTH B = CABINET INTERNAL DEPTH = CABINET INTERNAL WIDTH AV = EXTENSION LOSS * = + 3mm with OneTouch slide (The OneTouch system is guaranteed for drawers with width max 600mm) *DYNAMIC LOAD Area to push to activate OneTouch system 12 550 Area to push to activate OneTouch system 99 100 128 Bene ts for the industry 160 hcuoteno Large range of standard 192 depths from 250 to 550 mm 224 Full extension for complete e256 ra stendrawer ibacaccess sseleldnah Very tolerant due to288 built-in exibility 0 utinru100f nrdamping edom with fo trap New generation ofer SlowMotion = ON DEMAND cuotenofeature VGFto.always ngised ˆstop-close feature andhfinalrelease guarantee drawer closure also under adverse conditions Drawer mounting & dimensions,esease iceofrpassembly si ygoand lo20nhcet Easy-Fix rapid xing for N650H Excel fulla extension Easy-Fix integrated anti-lift feature revo skrow dna elbailer Quick and easy front height adjustment without hthetdindustry iw rewslide ardnominal fo eglength nar egral Bene ts forof.the L = EXCEL disassembly drawer L = EXCEL SLIDE NOMINAL LENGTH A = DRAWER DEPTH B = CABINET INTERNAL DEPTH = CABINET INTERNAL WIDTH AV = EXTENSION LOSS * = + 3mm with OneTouch slide (The OneTouch system is guaranteed for drawers with width max 600mm) 12 20 FR 30 min. 37 HCUOT-ENO 30 min. max 600 Excel16full extension Easy-Fix ˆN650H 10 max 3mm GAP TO THE FRONT FOR ONETOUCH VERSION A = DRAWER DEPTH Large range of ability standard depths from 250 to 550 mm Excellent load with 30kg dynamic standard BA = CABINET INTERNAL DEPTH Full extension for complete drawer access 8 capacity throughout the 5 mrange = CABINET INTERNAL WIDTH in. 37 DRAWER WITH FRONT Very tolerant due to built-in exibility A AV = EXTENSION LOSS FR * = + 3mm slide with New generation of SlowMotion damping Bene ts26 mfor the consumer with OneTouch OneTouch system is guaranteed in. stop-close feature and(the FinalRelease feature to always Smooth functioning thanks to new generation 7 for drawers with width max 600mm) of wheel 2 L also under adverse conditions guarantee drawer closure design 11 B=L+3 (FOR LENGTH 250 0 Easy-Fix rapidfull xing for B=278) ease assemblyaccessibility and WITH SLOWMOTION Comfortable extension forofimproved 1 integrated and ease ofanti-lift use feature R F A+T nmaterials oitwithout omwols Ø6 Quick and front height adjustment Lasting quality to optimised T easythanks INTERNAL DRAWER 19+T* disassembly of the drawer otsquality evitpperception ada weofnthe lla Hidden assembly for p high Excellent 260*cabinet 310 load 360 ability 410 460with 510 30kg 560 dynamic standard L whole erange cdamping ive550 d gfor nipnoiseless mad eclosing solc 250 400 the FR 500 A capacity 2+T throughout Adaptive SlowMotion B=L+T+3* (FOR LENGTH 250 High-end OneTouch gwithnslowmotion iphandleless mab=296) d gnoperation orts a serusne in mm Bene ts forvalues thegiven consumer 355 gnithanks solc totcnew efregeneration p dna eofcwheel rof Smooth functioning design reward eht fo Comfortable full extension for improved85accessibility.noitidnoc ymirn.eve ni and ease of use Code Description 54.N650.H7.25*.0000 Excel N650H for 250mm deep drawer (1 set) 54.N650.H7.30*.0000 30 Excel N650H for deep drawer (1 set) 54.N650.H7.35*.0000 Excel N650H for mm deep drawer (1 set) 54.N650.H7.40*.0000 Excel N650H for deep drawer (1 set) 54.N650.H7.45*.0000 *DYNAMIC Excel N650H for deep drawer (1 set)load 54.N650.H7.50*.0000 Code Excel N650H for deep drawer (1 set) 85 Description Packing Packing 54.N650.H7.55*.0000 54.N650.H7.25*.0000A Excel N650H for 550mm 250mm deep drawer (1 set) *54.N650.H7.30*.0000 closing system: 0 = Self-ClosingExcel / Y = SlowMotion = OneTouch. N650H for/ P deep drawer 2 packing composed 6by: mi n. 1 box of 12 right pro les 7 Excel N650H for mm deep drawer 54.N650.H7.35*.0000 Area to push to activate OneTouch system 1 box of 12 left pro les 54.N650.H7.40*.0000 Excel N650H for deep drawer 1 box of 24 Easy-Fix devices. 11 mi n. (1 set) (1 set) (1 set) 54.N650.H7.45*.0000 16 max Excel N650H for deep drawer (1 set) 54.N650.H7.50*.0000 Excel N650H for deep drawer (1 set) Excel N650H for 550mm deep drawer Easy-Fix(1 set) 10 Ø6 54.N650.H7.55*.0000 * closing system: 0 = Self-Closing / Y = SlowMotion / P = OneTouch. packing composed by: 260* 360 410 460 510 560 L right pro 1 box of 12 les 310 1 box of 12 les A left pro 250 1 box of 24 Easy-Fix devices. 400 100 Values given in mm 500 550 355 11 Easy-Fix 20 ONE-TOUCH 10 Ø6 L 260* A 128250 Page 310 360 410 460 510 560 400 500 550 Specifications and design subject to change without 30 min. A Lasting quality thanks to optimised materials Hidden assembly2for high quality perception of the 6m whole cabinet in. 7 Adaptive SlowMotionFR damping for noiseless closing High-end OneTouch handleless operation SLIDES 10 max 16 max 12 *DYNAMIC LOAD 500 20 N650H 30 SLIDES 400 100 30 min. 16 max 10 max 250 2 *DYNAMIC LOAD 10 max 99 30 SLIDES 9.hcuoTenO = P / noitomwols = Y / gnisodrawer lc-fles = 0RUNNERS :metsys g-nfgv isolc * :yb desopmoc gnikcap lairtsudni sel orp thgir 21 fo xob 1 sel orp tfel 21 fo xob 1 R58XEAF145X (H95). s e c i v e d xif-ysae 42 fo xob 1 2 SETS NEEDED FOR APPLICATION L = EXCEL SLIDE NOMINAL LENGTH OneTouch A = DRAWER DEPTH Handleless cabinets are B = CABINET INTERNAL DEPTH part of modern furniture design. FGV OneTouch = CABINET INTERNAL WIDTH technology is precise, AV = EXTENSION LOSS reliable and works over a *t = no i c e+ 3mm A l l d iwith m e n s ionetouch o n s i n m i l l i mslide e t r elarge s ( n orange m i n a lof ) drawer width. (The OneTouch system is guaranteed l
DRAWER RUNNERS - FGV SLOWMOTION ZETA ANYWAY SOFT CLOSE MECHANISM RETROFIT Universal solution suitable for all Uniset Drawers and Standard Drawer Runners. The unit is symmetrical and reversible with an anti-lift system. Slowmotion Zeta Anyway Mechanism Uniset Fixing Bracket ZETA ANYWAY SLOWMOTION MECHANISM FGV RF59072001Z0X0020 ZETA BRACET FOR STANDARD DRAWER RUNNER TS RF59072S01Z000020 ZETA BRACET FOR UNISET/METABOX RUNNERS RF59072D01Z000020 Standard FGV Drawer Runner Fixing Bracket DEPTH TABLE SHOWING NUMBER OF SLOWMOTION ZETA ANYWAY RECOMMENDED: BASE 400 500 600 700 800 900 270 1 1 1 1 2 2 1 1 1 1 2 2 1 1 1 1 2 2 400 1 1 1 1 2 2 1 1 1 2 2 2 500 1 1 2 2 2 2 550 1 1 2 2 2 2 600 1 1 2 2 2 2 FGV UNISET DRAWER APPLICATION STANDARD FGV DRAWER RUNNER APPLICATION Page 129
DRAWER RUNNER WHITE - FGV RTS603WH 1.2mm - RTS604WH 1.2mm - RTS605WH 1.2mm - Dynamic load: 25kg 1.2mm thick Bottom mounting 25 SIDE FIXING POSITIONS L 2 A 2 L E D C 16 64 35 16 37 37 G B 16 F 48 H DRAWER INSTALLATION DIMENSIONS RTS613 BALL BEARING RUNNER FULL EXT (45MM) RTS614 BALL BEARING RUNNER FULL EXT (45MM) RTS615 BALL BEARING RUNNER FULL EXT (45MM) Full Extension Dynamic load: 45kg Side Fixing Unlocking Device 45 L A B C D E F G H 295 224 - - 96 128-345 224 - - 128 128-400 400 395 224 288-160 160-445 224 352-160 192 81 500 500 495 224 352 416 192 224-550 550 545 224 352 416 224 224-600 600 595 224 352 480 256 256 - RHD MM HIDE-AWAY DOOR SYSTEM Maximum slide-in depth 344mm Includes hinges Maximum door weight 5.5g Maximum dooor height 700mm Door thickness 16 to 20mm RHD500 500MM HIDE-AWAY DOOR SYSTEM Maximum slide-in depth 394mm Includes hinges Maximum door weight 5.5kg Maximum dooor height 700mm Door thickness 16 to 20mm Metal Follower Strip Cabinet Side Slide 26+D.T. First hold location of Slide Door Concealed Hinge with Half overlay 40 Concealed Hinge Door Metal Follower Strip Concealed Hinge with Half overlay Page 130
DRAWER RUNNERS - CABX DRAWER RUNNERS - CABX ECONO ECONOMICALLY SOURCED & PRICED RANGES OF HARDWARE FOR THE ITCHEN & FURNITURE INDUSTRIES DRAWER RUNNER - WHITE SIDE FIXING POSITIONS ADRUNMMWH ADRUNMMWH 1.2mm - 1.2mm - mm ADRUN400MMWH 1.2mm - ADRUNMMWH 1.2mm - ADRUN500MMWH 1.2mm - ADRUN550MMWH 1.2mm - 550mm ADRUN600MMWH 1.2mm - 600mm Dynamic load: 20kg 1.2mm thick Bottom mounting 20 mm 54 64 8 550mm 600mm 2 28 64 37 128 96 128 128 64 ALDRUNMMWH 0.9mm - INSTALLATION DIMENSIONS 12.5 +0.5 ALDRUNMMWH ALDRUN400MMWH ALDRUNMMWH ALDRUN500MMWH 0.9mm - mm 0.9mm - 0.9mm - 0.9mm - Dynamic load: 15kg 0.9mm thick Bottom mounting 15 15 5.5 DRAWER RUNNER METABOX RMETABOX500150WH RMETABOX50086WH RMETABOX150WH RMETABOX86WH 500x150mm White (1.0mm) 500x86mm White (1.0mm) x150mm White (1.0mm) x86mm White (1.0mm) INSTALLATION DIMENSIONS Dynamic load: 25kg 1mm thick 25 Page 131
BALL BEARING DRAWER RUNNER 27MM GALVANISED CBB27GAL CBB27GAL CBB27400GAL CBB27GAL CBB27500GAL (27mm) - MM (27mm) - MM (27mm) - 400MM (27mm) - MM (27mm) - 500MM 27mm Dynamic load: 25kg 25 9mm BALL BEARING DRAWER RUNNER 35MM GALVANISED CBB35250GAL CBB35GAL CBB35GAL CBB35400GAL CBB35GAL CBB35500GAL (35mm) - 250MM (35mm) - MM (35mm) - MM (35mm) - 400MM (35mm) - MM (35mm) - 500MM 35mm Dynamic load: 30kg 30 12.7mm BALL BEARING DRAWER RUNNER 45MM GALVANISED ABB250GAL ABBGAL ABBGAL ABB400GAL ABBGAL ABB500GAL ABB550GAL ABB600GAL 250mm mm 550mm 600mm 45mm Dynamic load: 35kg 35 12.7mm Page 1
DRAWER RUNNERS - CABX BALL BEARING DRAWER RUNNER SOFT CLOSING RTS813 RTS814 RTS815 Soft Closing Dynamic load: 35kg 35 SOFT CLOSING BALL BEARING DRAWER RUNNER ONE TOUCH - PUSH TO OPEN CBB400OT CBBOT CBB500OT Push to open Dynamic load: 35kg 35 ONE-TOUCH UNDER MOUNT DRAWER RUNNER SOFT CLOSING ADH301D ADH301D ADH301D400 ADH301D ADH301D500 ADH301D550 mm 550mm Drawer s Length L 600mm Cabinet s Depth L1(min.) 2mm 372mm 472mm 522mm 572mm 622mm Soft Closing Dynamic load: 35kg Undermount 35 SOFT CLOSING A SIDE VIEW DRAWER HOLE LOCATION Page 133