GmbH Mathildenstr. 10A 82319 Starnberg Germany Wire Wound Chip Inductors Ferrite SMD 5/10/2018 1/13 GmbH www.freltec.com
SPECIFICATION Part Number 095 05 * 101 * J * E02 _ * Type Size Value Packing Current (Optional) 095 : SMD Wire Wound Chip Inductor Ferrite 05 : 0805 08 : 1008 The value is given in µh N indicates the decimal point for nh and U indicates the decimal point for µh. When higher than 100 µh the last digit is the multiplier which denotes the number of zero following J : ±5% K : ±10% 10 : 1210 Example: M : ±20% 12 : 1812 3U3 : 3300 nh 23 : 2220 U68 : 680 nh 151 : 150 µh All products according to RoHS (2011/65/EU) E0A: tape and reel, for 500pcs, embossed plastic tape (7 reel), 1812 size L01: tape and reel, for 1kpcs, embossed plastic tape (13 reel), 2220 size E02: tape and reel, for 2kpcs, embossed plastic tape (7 reel), 0805, 1008 and 1210 size C : Large Current L : Low Profile * not all combination is possible 5/10/2018 2/13
Dimensions and recommended PCB pattern for reflow soldering: Figure A Figure B Figure C A B C D Size Figure max. max. max. Ref. E F G H I J K 0805 A 2,29 1,71 1,45 0,51-0,44 1,02 1,78 1,02 0,76 1,27 1008 A 2,92 2,79 2,10 1,20-0,45 1,52 2,54 1,02 1,27 2,03 1210 B 3,50 2,80 2,50 1,60 0,8 - - 2,00 1,20 1,60-1812 B 4,80 3,50 3,50 1,80 1,1 - - 2,80 1,50 3,00-2220 C 5,90 5,20 4,30 4±0,2 0,7±0,2 - - 4,50 2,00 4,00-0805 A 2,29 1,73 1,00 0,51-0,44 1,02 1,78 1,02 0,76 1,27 1008 A 2,92 2,79 2,10 1,20-0,45 1,52 2,54 1,02 1,27 2,03 1812 B 4,80 3,50 3,50 1,40 1,1 - - 2,80 1,50 3,00-2220 C 5,90 5,20 4,30 4±0,2 0,7±0,2 - - 4,50 2,00 4,00 - Unit: mm Standard 0805 Test Freq. (MHz) 5/10/2018 3/13 Q min. SRF (MHz) min. DCR (Ω) max. IDC (ma) max. U12 0,12 700 0,18 1100 U15 0,15 900 0,18 1100 U18 0,18 600 0,20 800 U22 0,22 550 0,25 700 U27 0,27 550 0,30 700 U33 0,33 25,2 20 550 0,35 650 U39 0,39 420 0,35 600 U47 0,47 350 0,45 600 U56 0,56 300 0,45 550 U68 0,68 300 0,60 500 U82 0,82 300 0,55 500 0 280 0,80 450 ±5, ±10% 1U2 1,20 280 0,90 400 1U5 1,50 250 1,05 350 1U8 1,80 120 0,90 350 2U2 2,20 110 1,10 320 2U7 2,70 70 1,20 320 7,96 15 3U3 3,30 60 1,50 300 3U9 3,90 55 1,60 300 4U7 4,70 45 2,10 200 5U6 5,60 40 2,30 250 6U8 6,80 36 2,70 200 8U2 8,20 33 3,30 180 100 10 2,52 10 30 4,50 180
Standard 1008 Test Freq. (MHz) Q min. SRF (MHz) min. DCR (Ω) max. IDC (ma) max. U12 0,12 800 0,10 1200 U15 0,15 800 0,15 1200 U18 0,18 600 0,20 1200 U22 0,22 600 0,25 1200 U27 0,27 425 0,30 1200 U33 0,33 25,2 30 400 0,20 1100 U39 0,39 375 0,40 700 U47 0,47 350 0,45 900 U56 0,56 325 0,30 850 U68 0,68 300 0,40 800 U82 0,82 260 0,45 700 245 0,50 600 1U2 1,2 230 0,55 600 1U5 1,5 182 0,65 550 1U8 1,8 135 0,80 500 2U2 2,2 105 0,95 500 2U7 2,7 70 1,05 350 7,96 25 3U3 3,3 55 1,15 350 3U9 3,9 ±5, ±10% 48 1,25 310 4U7 4,7 43 1,28 300 5U6 5,6 42 1,35 300 6U8 6,8 39 1,60 300 8U2 8,2 36 1,80 250 100 10 33 2,30 250 120 12 28 2,40 200 150 15 24 2,70 200 180 18 20 20 2,80 180 220 22 18 3,30 180 270 27 17 3,50 160 2,52 330 33 16 4,00 120 390 39 15 5,50 120 470 47 14 5,90 110 560 56 18 13 6,80 90 680 68 12 9,50 90 820 82 10 11,0 80 101 100 1 12 8 11,0 120 5/10/2018 4/13
Standard 1210 Test Freq. Q SRF DCR IDC (MHz) min. (MHz) min. (Ω) max. (ma) max. U18 0,18 400 0,28 450 U22 0,22 350 0,32 450 U27 0,27 320 0,36 450 U33 0,33 300 0,40 450 U39 0,39 ±20% 25,2 250 0,45 450 U47 0,47 220 0,50 450 U56 0,56 180 0,55 450 U68 0,68 160 0,60 450 U82 0,82 140 0,65 450 120 0,70 400 1U2 1,2 100 0,75 390 1U5 1,5 85 0,85 370 1U8 1,8 80 0,90 350 2U2 2,2 75 1,00 320 2U7 2,7 70 1,10 290 7,96 3U3 3,3 60 1,20 260 3U9 3,9 30 55 1,30 250 4U7 4,7 50 1,50 220 5U6 5,6 45 1,60 200 6U8 6,8 40 1,80 180 8U2 8,2 35 2,00 170 100 10 30 2,10 150 120 12 20 2,50 140 150 15 ±10% 20 2,80 130 180 18 20 3,30 120 220 22 20 3,70 110 270 27 20 5,00 80 2,52 330 33 17 5,60 70 390 39 16 6,40 65 470 47 15 7,00 60 560 56 13 8,00 55 680 68 12 9,00 50 820 82 11 10,00 45 101 100 10 10,00 40 121 120 10 11,00 70 151 150 0,796 20 8 15,00 65 181 180 7 17,00 60 221 220 7 21,00 50 5/10/2018 5/13
Standard 1812 Test Freq. Q SRF DCR IDC (MHz) min. (MHz) min. (Ω) max. (ma) max. U18 0,18 220 0,24 700 U22 0,22 200 0,25 665 U27 0,27 180 0,26 635 U33 0,33 165 0,28 605 U39 0,39 ±20% 25,2 30 150 0,30 575 U47 0,47 145 0,32 545 U56 0,56 140 0,36 520 U68 0,68 135 0,40 500 U82 0,82 130 0,45 475 100 0,50 450 1U2 1,2 80 0,55 430 1U5 1,5 70 0,60 410 1U8 1,8 60 0,65 390 2U2 2,2 55 0,70 380 2U7 2,7 50 0,75 370 7,96 3U3 3,3 45 0,80 355 3U9 3,9 40 0,90 330 4U7 4,7 35 1,00 315 5U6 5,6 33 1,10 300 6U8 6,8 27 1,20 285 8U2 8,2 25 1,40 270 50 100 10 20 1,60 250 120 12 18 2,00 225 150 15 17 2,50 200 180 18 15 2,80 190 220 22 13 3,20 180 270 27 12 3,60 170 ±10% 2,52 330 33 11 4,00 160 390 39 10 4,50 150 470 47 10 5,00 140 560 56 9 5,50 135 680 68 9 6,00 130 820 82 8 7,00 120 101 100 8 8,00 110 121 120 6 8,00 110 151 150 40 5 9,00 105 181 180 5 9,50 102 221 220 4 10,0 100 271 270 4 15,0 92 0,796 331 330 3,5 15,0 85 391 390 3 18,0 80 471 470 30 3 26,0 62 561 560 3 30,0 50 681 680 3 30,0 50 821 820 2,5 43,0 30 5/10/2018 6/13
Standard 2220 (mh) 122 1,2 Test Freq. (MHz) Q min. SRF DCR IDC (MHz) min. (Ω) max. (ma) max. 1,5 17 75 152 1,5 1,4 20 70 182 1,8 1,3 30 60 222 2,2 1,2 35 55 272 2,7 1,1 55 45 332 3,3 0,252 20 1,0 60 40 ±5, ±10% 392 3,9 1,0 70 38 472 4,7 0,9 78 36 562 5,6 0,8 85 33 682 6,8 0,7 110 30 822 8,2 0,6 125 28 103 10 0,0796 15 0,5 150 25 Standard 0805 Low Profile Type Q Test Freq. SRF DCR IDC min. (MHz) (MHz) min. (Ω) max. (ma) max. 15 L: 7,96 / Q: 25,2 115 0,90 450 3U3 3,3 13 70 1,40 450 4U7 4,7 15 65 1,90 400 6U8 6,8 ±5, ±10% 15 41 2,40 400 7,96 100 10 14 31 2,70 400 150 15 12 28 5,00 300 220 22 10 25 6,00 250 Standard 1008 Large Current Type Q min. 22 Test Freq. (MHz) SRF DCR IDC (MHz) min. (Ω) max. (ma) max. 245 0,35 800 1U2 1,2 25 230 0,40 550 1U5 1,5 25 182 0,45 550 1U8 1,8 25 135 0,55 550 2U2 2,2 22 105 0,60 500 2U7 2,7 25 70 0,70 500 7,96 3U3 3,3 22 55 0,75 450 3U9 3,9 25 50 0,80 450 4U7 4,7 22 45 0,90 400 5U6 5,6 ±5, ±10% 22 42 1,05 400 6U8 6,8 22 40 1,00 400 8U2 8,2 22 36 1,30 350 100 10 20 35 1,50 300 120 12 20 30 1,70 280 150 15 20 24 1,90 250 180 18 20 2,52 20 2,60 200 220 22 20 18 2,80 200 270 27 20 17 3,40 180 330 33 20 16 3,50 180 5/10/2018 7/13
SMD Standard 1812 Large Current Type Q Test Freq. SRF DCR IDC min. (MHz) (MHz) min. (Ω) max. (ma) max. 200 0,11 1050 1U2 1,2 160 0,12 1000 1U5 1,5 130 0,15 950 1U8 1,8 100 0,16 900 2U2 2,2 80 0,18 850 2U7 2,7 60 0,20 800 7,96 3U3 3,3 45 0,22 750 3U9 3,9 40 0,24 700 4U7 4,7 35 0,27 650 5U6 5,6 30 0,30 650 6U8 6,8 28 0,35 600 8U2 8,2 25 0,40 600 10 100 10 22 0,50 550 120 12 21 0,60 500 150 15 20 0,70 450 180 18 19 0,80 400 220 22 18 0,90 370 270 27 16 1,20 330 ±10% 2,52 330 33 14 1,40 300 390 39 12 1,60 280 470 47 11,5 1,90 260 560 56 11 2,20 240 680 68 10 2,60 220 820 82 9 3,50 200 101 100 8 4,00 180 121 120 7,5 4,50 160 151 150 7 6,50 140 181 180 6,5 7,50 120 221 220 5,5 9,00 120 271 270 5 11,0 100 20 0,796 331 330 4 13,0 90 391 390 3,8 23,0 80 471 470 3,5 26 75 561 560 2,8 30 70 681 680 2,6 40 65 821 820 2,5 45 60 5/10/2018 8/13
Standard 2220 Large Current Type Q Test Freq. SRF DCR IDC min. (MHz) (MHz) min. (Ω) max. (ma) max. 95 0,03 1800 1U2 1,2 70 0,035 1700 1U5 1,5 55 0,04 1600 1U8 1,8 47 0,05 1400 2U2 2,2 42 0,06 1300 2U7 2,7 37 0,07 1200 7,96 3U3 3,3 34 0,08 1120 3U9 3,9 32 0,09 1050 4U7 4,7 29 0,11 950 5U6 5,6 26 0,13 880 6U8 6,8 24 0,15 810 8U2 8,2 22 0,18 750 10 100 10 19 0,21 690 120 12 17 0,25 630 150 15 16 0,30 580 180 18 14 0,36 530 220 22 13 0,43 480 270 27 11,5 0,52 440 2,52 330 33 ±5, ±10% 10,5 0,62 400 390 39 9,5 0,72 370 470 47 8,5 0,85 340 560 56 7,8 1,00 310 680 68 7,0 1,2 290 820 82 6,4 1,4 270 101 100 6,0 1,6 250 121 120 5,4 1,9 230 151 150 4,8 2,2 210 181 180 4,4 2,8 190 221 220 3,9 3,4 170 271 270 3,6 4,2 155 0,796 331 330 20 3,2 4,9 140 391 390 2,9 5,8 130 471 470 2,6 7,0 120 561 560 2,4 8,5 110 681 680 2,2 10 100 821 820 2,0 13 90 102 1000 0,252 1,8 15 85 Construction 1 Molded resin 3 Ferrite core 2 Electrode (Ag) 4 Magnet wire 5/10/2018 9/13
Tape Dimensions P0 E P2 D W F D0 B P1 A Embossed Plastic Tape Type A B E F P 0 P 1 P 2 W T 1 T 2 D D 0 0805 1,85±0,1 2,45±0,1 1,75±0,1 3,5±0,05 4±0,1 4±0,1 2±0,05 8±0,2 1.45±0,05 0,23±0,05 1,5 1,5 1008 2,80±0,1 2,95±0,1 1,75±0,1 3,5±0,05 4±0,1 4±0,1 2±0,05 8±0,2 2.22±0,05 0,23±0,05 1,5 1,5 1210 2,96±0,1 3,60±0,1 1,75±0,1 3,5±0,05 4±0,1 4±0,1 2±0,05 8±0,2 2.40±0,05 0,23±0,05 1,5 1,5 1812 3,30±0,1 5,00±0,1 1,75±0,1 5,5±0,05 4±0,1 8±0,1 2±0,05 12±0,2 3.50±0,05 0,30±0,05 1,5 1,5 2223 5,35±0,1 6,10±0,1 1,75±0,1 7,5±0,05 4±0,1 12±0,1 2±0,05 16±0,2 5.50±0,05 0,35±0,05 1,5 1,5 Reel Dimensions Type ΦA ΦB ΦC W T 0805 178±2.0 60±0.5 13±0.3 9±0.3 12±1.0 1008 178±2.0 60±0.5 13±0.3 9±0.3 12±1.0 1210 178±2.0 60±0.5 13±0.3 9±0.3 12±1.0 1812 178±2.0 80±0.5 13±0.3 13.2±0.3 16±1.0 2223 330±2.0 100±0.5 13±0.3 17.4±0.3 22±1.0 Lead Dimensions: Trailer End Leader End Trailer (80mm min.) Empty Compartments with Cover Tape (100mm min.) Cover Tape Only (250mm min) 5/10/2018 10/13
Cover Tape Peel off Strength Peel-off force should be in the range of 0,1N~0,6N in the arrow direction at the following conditions: Temperature: 5~35 C Humidity: 45~85% Top Cover Tape Atmospheric Pressure: 860~1060 hpa 160~180 Base Tape Operating and storage Temperature range (individual chip without packing): -40 C to +85 C Lead Free Reflow Soldering Profile Stock period The performance of these products, including the solderability, is guaranteed for 12 month, provided that they remain packed as they were when delivered and stored at a temperature of 25 C ± 3 C and a relative humidity less than 80%RH 5/10/2018 11/13
Electrical Performance Test Item Requirement Test Method Q SRF DC Resistance DCR Rated Current IDC Refer to standard electrical characteristic spec. HP4291 or HP4284 HP4291 or HP4284 HP4291 Agilent 34401A Applied the current to coils, The inductance change should be less than 10% to initial value Mechanical Performance Test Item Requirement Test Method Solderability Resistance to Soldering Heat Vibration The electrodes shall be at least 90% covered with new solder coating Appearance: No damage Appearance: No damage L change: within±10% Q change: within±30% DCR: within specification Climatic Test Item Requirement Test Method Lead-free inductor: after fluxing(alpha 100 or equiv), inductor shall be dipped in a melted solder bath at 245±5 C, 5±0,5 seconds Pre-heating: 150 C, 1min. Solder Temperature: 260±5 C Immersion Time: 10±1 seconds Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 min. Amplitude: 1,5 mm Time: 2 hrs for each axis (X, Y&Z), total 6 hrs Temperature Cycle Damp Heat with Load High Temperature Storage Low Temperature Storage Appearance: No damage L change: within±10% Q change: within±30% DCR: within specification One cycle: Temperature Time Step ( C) (min.) 1-25±3 30 2 25±2 3 3 85±3 30 4 25±2 3 Total: 100 cycles Measured after exposure in the room condition for 24 hrs Temperature: 40±2 C Relative Humidity: 90 ~ 95% Time: 1000 hrs Measured after exposure in the room condition for 24 hrs Temperature: 85±3 C Relative Humidity: 20% Applied Current: Rated Current Time: 1000 hrs Measured after exposure in the room condition for 24 hrs Temperature: -25±3 C Relative Humidity: 0% Time: 1000 hrs Measured after exposure in the room condition for 24 hrs 5/10/2018 12/13
Published by GmbH Mathildenstr. 10A; 82319 Starnberg; Germany 2018 GmbH. All Rights Reserved. The following applies to all products named in this publication: 1. The information describes the type of component and shall not be considered as assured characteristics. 2. Terms of delivery and rights to change design reserved. 3. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. Nevertheless, we explicitly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 4. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 5. The warnings, cautions and product-specific notes must be observed. 6. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous ). Useful information on this will be found in our Material Data Sheets. Should you have any more detailed questions, please contact our sales offices. 7. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true for the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 8. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the General conditions for the supply of products and services of the electrical and electronics industry published by the German Electrical and Electronics Industry Association (ZVEI), available at www.freltec.com. 9. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. 10. The trade name is a trademark registered or pending in Europe and in other countries. 5/10/2018 13/13