Grade 9 Automotive Technology Term 1 1 Day Safety Training and 1 Day Exploratory Identify hazardous waste and hazardous materials and the safety necessary when handling it. Identify flammable materials and how to safely handle it. Describe what an MSDS consists of and where it is located. Explain how to use a fire extinguisher to put out a fire. Remove and install a wheel from a vehicle and torque to specifications. Mount and dismount a tire using a rim clamp style tire machine. Properly set up an above ground twin post lift. Raise and lower the drive on alignment rack and rack jacks. Jack up and secure a vehicle using a hydraulic floor jack and jack stands. Term 1 Chapter 3: Working Safely In 1.A.02.01 thru 1.A.02.05 The Shop (1 day Daily Journaling 1.A.02.09 Hazardous and Flammable Safety Tests Quizzes 1 Day Exploratory Safety Training Hazardous Materials And Flammable Materials Video Lift Safety Demonstration Term 1 (1 day Chapter 42: Tires and Wheels Daily Journaling and 2.G.02.01 thru 2.G.02.02 2.G.03.01 thru 2.G.03.02 2.G.04.01 thru 2.G.04.02 Quizzes Instructor/Peer Teacher Demonstration Instructor And Notes On Tire Repair Procedures
Grade 9 Automotive Technology Term 2 1 Week Exploratory and Final Shop Pick Work Safely in the shop using skills they acquired during the 1 day and 1 week explore. Remove and install a wheel from a vehicle and torque to specifications. Dismount and mount a tire using a Coates style tire machine. Dismount and mount a tire using a rim clamp style tire machine. Properly set up an above ground twin post lift. Raise and lower the drive on alignment rack and rack jacks. Jack up and secure a vehicle using a hydraulic floor jack and jack stands. Light, extinguish and properly drain an Oxygen/Acetylene torch set. Resurface a brake rotor and drum using the Aamco brake lathe. Term 2 Chapter 3: Working Safely In 1.A.02.01 thru 1.A.02.06 Lifting It Right Lifting It Right DVD The Shop Test Term 2 Daily Journaling Chapter 42: Tires and Wheels Daily Journaling 2.A.01.01 thru 2.A.01.02 2.A.02.02 thru 2.A.02.03 2.G.02.01 thru 2.G.02.02 2.G.03.01 thru 2.G.03.02 2.G.04.01 thru 2.G.04.02 Shop Safety Quizzes 1 Week Exploratory Safety Training Lift Safety Demonstration Instructor/Peer Teacher Demonstration Instructor and Notes On Tire Repair Procedures Instructor Demonstration on Tire Puncture Repair
Grade 9 Automotive Technology Term 3 Identify different types of screwdrivers. Identify different types of pliers. Identify different types of combination and open end wrenches. Identify different types of socket wrenches, ratchets, extensions and swivels. Identify different types of hammering tools. Demonstrate the proper use and safety of power tools. Demonstrate the proper use of pneumatic tools. Identify the difference between metric and SAE fasteners. Identify the hardness/grade of metric or SAE fasteners. Identify different types of measuring tools. Identify types of holding tools. Explain the fundamental diagnostic and repair principles of an automobile engine. Explain the operation and identify basic components of the steering and suspension systems. Explain the fundamental principles of automobile electrical/electronic system. Term 3 Chapter 6: Tools and Shop 2.B.01.01 thru 2.B.01.05 Chapter 6 Written CDX Online Safety Training Equipment Test Metric and SAE Fastener Identification Alldata and Fastener Measurement 2.B.02.01 thru 2.B.02.06 2.B.03.01 thru 2.B.03.07 2.B.04.01 thru 2.B.04.04 2.B.05.01 thru 2.B.05.03 Hand Tool Safety CDX Textbook, Chapter 6 Hand Tool Safety Training Hand Tool Safety Demonstration Chapter 6 Automotive
Term 3 Chapter 29: Servicing the Vehicles Suspension 2.H.01.01 thru 2.H.01.03 Chapter 29 Hand Tool Safety CDX Textbook, Chapter 29 Suspension Service Training NATEF Tasks on DVD Chapter 29 Automotive Term 3 Chapter 36: Principles of Electrical systems 2.T.01.01 thru 2.T.01.03 2.T.02.01 2.T.03.01 Chapter 36 Principles of Electrical Systems Test CDX Textbook, Chapter 36 Electrical Principles Training NATEF Tasks on DVD Chapter 36 Automotive Term 3 Chapter 10: Automobile Engine Mechanical Testing 2.Z.01.01 thru 2.Z.01.03 Chapter 10 Engine Diagnosis Test CDX Textbook, Chapter 10 Engine Mechanical Testing Diagnosis Chapter 10
Grade 9 Automotive Technology Term 4 Explain the basic principles of braking, including kinetic and static friction and friction materials. Describe the components of a hydraulic braking system and their operation. Perform manual bleeding of a hydraulic brake system. Perform service on Disc and Drum style braking systems. Identify the purpose of a heating and air conditioning system. Identify the common parts of a heating system and their functions. Describe how an automotive air conditioning system works. Explain why R-134a is the refrigerant of choice. Understand the special handling procedures for automotive refrigerants. Perform a performance test on a heating and air conditioning systems. Use approved methods and equipment to reclaim, evacuate and recharge an air conditioning system. Explain the fundamental principles and operations of modern engine performance and basic diagnosis procedures. Explain the on-board diagnostic and basic repair procedures associated with automobile engine performance. Term 4 Chapter 30 Principles of 2.O.01.01 thru 2.O.01.02 Chapter 30 CDX Textbook Chapter 30 Braking 2.O.02.01 thru 2.O.02.04 2.P.01.01 thru 2.P.01.06 2.P.02.01 thru 2.P.02.03 Braking System Fundamentals Brake System Fundamentals Training Chapter 30 automotive Brake Service Demonstration
Term 4 rotation Term 4 rotation Chapter 41: Principles of Heating and Air Conditioning Chapter 49: On-board Diagnostics 2.L.01.01 thru 2.L.01.04 2.CC.04.01 thru 2.CC.04.07 2.II.01.01 thru 2.II.01.04 2.II.02.01 thru 2.II.02.06 2.II.03.01 thru 2.II.03.08 2.JJ.02.01 thru 2.JJ.02.04 Chapter 41 Chapter 49 CDX Textbook Chapter 41 Heating and Air Conditioning Chapter 41 HVAC System Demonstration NATEF Tasks on DVD CDX Textbook Chapter 49 On-board Diagnostics Scantool Demonstration Chapter 49