S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible (S series) Wave solderable Washable Optional ESD protection ELECTRICL SPECIFICTIONS Max. current/voltage rating with resistive load : - silver contacts ( or 1) : 2 250VC - 5 125VC - 4 30VDC - gold plated brass contacts (CD or 0) : 0,4V 20VC or DC - gold plated silver contacts (D or 2) : 2 250VC - 5 125VC - 4 30VDC (300m 30VDC for gold plating) Initial contact resistance : 10 mω max. Insulation resistance : 1.000 MΩ min. Dielectric strength : 1.000 Vrms 50 Hz min. Electrical life at full load : Contacts Number of cycles 2 positions 3 positions or 1 CD or 0 D or 2 40.000 40.000 100.000 50.000 40.000 40.000 MTERILS Case and cover : UL94-VO, polyamide, glass filled or PES ctuator : brass, chrome plated Contacts CD or 0 : brass, gold plated or 1 : silver D or 2 : silver, gold plated Terminal seal : epoxy GENERL SPECIFICTIONS Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. ctuator strength is 10N max. Operating temperature : -20 C to +85 C Storage temperature : -40 C to +85 C Moisture : The insulating materials employed and the complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3). Soldering - thermal shock (S series only) : The switches are especially designed for flow soldering at 260 C during 5 seconds owing to high temperature polymer parts. Iron soldering (SF series) : 300 C 5 sec. max. Solderability : The switches are tested at 235 C according to IEC 68-2-20 after accelerated aging. GENCY PPROVLS CECC 96201-006 vailability : consult factory for details of approved models. Marking : to order switches marked UL or CECC, complete appropriate box of ordering format. PEM www.apem.com -13
Overview S SERIES W WW Y Terminals Right angle, horizontal mounting Right angle, vertical mounting Bracket mounting Bushing and terminals 2 Terminal spacing 4,7 or 3,81 0 Terminal spacing 5,08 (SY and SW switches) Number of poles 3 Single pole 4 Double pole Electrical functions 6 ON - ON 9 ON OFF ON 7 MOM OFF MOM 8 ON OFF MOM 2 ON - MOM 4TH ON ON ON ll models with plain bushing. Contact materials Levers pprovals Special options Insulating caps D CD Silver Silver, gold plated Brass, gold plated -7 Short Standard -13 Long Insulated levers -11 Long -8 Short UL CECC vailability : Consult factory for details of approved models. X601 F X696 Silver plated brass contacts Tin dipped terminals Higher bushing (for insulated levers) U270 For lever 13 U1710 For lever 7 BOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as above Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Packaging unit : 50 or 25 pieces depending on model. -14 www.apem.com PEM
Straight PC or right angle terminals Terminal spacing 4,7 or 5,08 on SW switches 1 and 2 pole configurations 1 2 3 MODEL STRUCTURE Right angle terminals - horizontal - spacing 4,7 Single pole Double pole 2-3 2-1 5-6 4-5 SW236 SW246 ON - ON SW239 SW249 ON OFF ON SW237 SW247 MOM OFF MOM SW238 SW248 ON OFF MOM SW232 SW242 ON - MOM SW244TH* ON ON ON 6.10 (.240) (.106 DI) 3.90 (.153) 6.90 (.271) I Ø6.20 (.244 DI) Shown with lever (-7) II III 3 2 1 0.80 (.031) 0.50 (.019) 11.65 (.458) 5.30 (.208) 0.40 (.015) Ø1.60 (.062 DI) Right angle terminals - vertical Single pole Double pole I II III 2-3 2-1 5-6 4-5 5.30 (.208) Ø6.20 (.244 DI) I II III 6.10 (.240) (.106 DI) SWW236 SWW246 ON - ON SWW239 SWW249 ON OFF ON SWW237 SWW247 MOM OFF MOM SWW238 SWW248** ON OFF MOM SWW232 SWW242** ON - MOM SWW244TH* ON ON ON 11.35 (.446) 4.75 (.187) 0.80 (.039) 13.00 (.511) 1 2 3 0.50 (.019) 3.10 (.122) 6.60 (.259) 4.75 (.187) Ø1.60 (.062 DI) Bracket mounting Single pole Double pole 2-3 2-1 5-6 4-5 SY236 SY246 ON - ON SY239 SY249 ON OFF ON SY237 SY247 MOM OFF MOM SY238 SY248 ON OFF MOM SY232 SY242 ON - MOM SY244TH* ON ON ON 4.40 (.173) 5.30 (.208) 0.90 (.035) 3.18 (.125) 11.35 (.446) Ø6.20 (.244) 3 2 1 15.75 (.620) 0.40 (.015) (.106 DI) 11.70 5.90 (.460) (.232) 8.20 (.322) 15.75 (.620) Ø1.60 (.062 DI) 15.75 (.620) 3.18 (.125) 4.75 (.187) * Function 4 : SP in DP case - TH connection, see end of catalogue. ** Functions 2 and 8 : reversed connection available. Consult factory. PEM www.apem.com -15
Right angle terminals - horizontal - spacing 5,08 Single pole Double pole 2-3 2-1 5-6 4-5 SW036 SW046 ON - ON SW039 SW049 ON OFF ON SW037 SW047 MOM OFF MOM SW038 SW048 ON OFF MOM SW032 SW042 ON - MOM SW044TH* ON ON ON 6.10 (.240) (.106 DI) 0.60 (.023) 3.90 (.153) 6.90 (.271) I Ø6.20 (.244 DI) 3 2 1 0.60 (.023) 0.60 (.023) II III 0.60 (.023) 11.65 (.458) 5.30 (.208) 0.40 (.015) Ø (.043 DI) * Function 4 : SP in DP case, see end of catalogue. PCB MOUNTING 3.60 (.141) 6.90 (.271) 6.00 (.236) 11.65 (.458) 6.65 (.261) 13.00 (.511) 17.10 (.673) 2.00 (.078) CP FOR PCB PROCESSING Provide additional protection during PCB processing. Supplied mounted on the switch or separately. Material : vinyl 16.00 (.629) U3012 Ø4.76 (.187 DI) -16 www.apem.com PEM
CONTCT MTERILS D CD Silver Silver, gold plated Brass, gold plated LEVERS Dash compulsory before lever code. (.106) Ø3.00 (.118 DI) 6.30 (.248) -7-13 Standard Long 13.30 (.523) 6.30 (.248) If actuator not specified, we supply former default option -13. Insulated levers Protected against electrostatic discharges (ESD) up to 12 KV. Black colour. Ø2.90 (.114 DI) Ø2.90 (.114 DI) 13.00 (.511) 6.80 (.267) To combine with option X696. -8 Short -11 Long SPECIL OPTIONS X601 Silver plated brass contacts Lower rating - Minimum quantity : 5.000 pieces per model and shipment. X696 Higher bushing 7,50. Compulsory for insulated levers 11 and 8. F Tin dipped terminals For models with gold plated contacts only. PEM www.apem.com -17
GENCY PPROVLS UL CECC vailability : consult factory for details of approved models. Marking : to order switches marked UL or CECC, please complete above box with desired approvals. Blank : no agency approval required. INSULTING CPS + U... Cap colours Replace "0" by number U270 For lever 13 11.00 (.433) Ø3.50 (.137 DI) U1710 For lever 7 7.30 (.287) Ø3.50 (.137 DI) 1 blue 1/4 dark blue 2 black 3 green 4 grey 5 yellow 6 red 7/1 white 9 orange -18 www.apem.com PEM
SF series Washable toggle switches - insulated threaded bushing Overview SF SERIES Number of poles 3 Single pole Electrical functions 6 ON - ON 9 ON OFF ON 7 MOM OFF MOM 8 ON OFF MOM 2 ON - MOM S0 P0 Terminals Solder lug terminals Straight PC terminals Contact and terminal materials 0 Brass, gold plated 1 Silver 2 Silver, gold plated 5 Special contact, lower rating 8 Contact brass, gold plated + tin plated terminals (for PC terminals only) 00 Long 01 Short Levers Insulated levers 08 Short 11 Long Model 00 Standard Insulating cap 10 P/N U270 For lever 00 only BOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as above Specifications are at the beginning of the S series. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Mounting accessories : 2 hex nuts 8 mm (.314) across flats, 1 locking ring and 1 lockwasher Standard and special hardware available are presented in section I. Packaging unit : 50 to 25 pieces depending on model. PEM www.apem.com -19
SF series Washable toggle switches - insulated threaded bushing Solder lug or straight PC terminals Keyway 1 2 3 Single pole configurations Max. torque : 0,25 Nm (.184 Ft.lb) Iron soldering : 300 C max. 5 sec. max. Max. panel thickness : 2,5 mm (.098) with 2 nuts 4 mm (.157) with 1 nut 2.45 (.096) 1.90 (.070) 1.90 (.074) 4.15 (.163) MODEL STRUCTURE 00 Shown with standard lever 00 Solder lugs : SF..S0 2-3 1-2 Keyway Ø6.35-40UNS (1/4 40UNS) Ø3.00 (.118 DI) III II I 10.70 (.421) SF36S0 ON - ON SF39S0 ON OFF ON SF37S0 MOM OFF MOM SF38S0 ON OFF MOM SF32S0 ON - MOM 6.60 (.259) 1 1.80 0.80 (.070) (.031) 2 3 0.50 (.019) 10.80 8.90 (.425) (.350) 2.45 (.096) Straight PC terminals : SF..P0 Keyway Ø3.00 (.118 DI) 2-3 1-2 Ø6.35-40UNS (1/4 40UNS) 10.70 (.421) SF36P0 ON - ON SF39P0 ON OFF ON SF37P0 MOM OFF MOM SF38P0 ON OFF MOM SF32P0 ON - MOM 6.60 (.259) Ø1.60 (.062) 1 2 3 0.80 (.031) 0.50 (.019) 10.80 8.90 (.425) (.350) 4.15 (.163) PNEL CUT-OUT Ø6.50 (.255 DI) Ø2.20 (.086 DI) 5.20 (.204) -20 www.apem.com PEM
SF series Washable toggle switches - insulated threaded bushing CONTCT ND TERMINL MTERILS 00 0 Brass, gold plated (standard) 1 Silver 2 Silver, gold plated 5 Special contact, lower rating, minimum quantity : consult factory. 8 Contact brass, gold plated + tin plated terminals (for PC terminals only) LEVERS 00 Ø3.00 (.118 DI) 10.70 (.421) (.106 DI) 8.90 (.350) 4.90 (.192) 8.90 (.350) 00 Standard 01 Insulated levers Protected against electrostatic discharges (ESD) up to 12KV. Black colour. Ø2.90 (.114 DI) Ø2.90 (.114 DI) 5.40 (.212) 8.90 (.350) 8.90 (.350) 11.50 (.452) 08 11 Short Long INSULTING CP Blank Without cap 11.00 (.433) Ø3.50 (.137 DI) 10 P/N U270 - For lever 00 00 To order cap separately, use its part number (U270). Cap colours Replace "0" by number 1 blue 1/4 dark blue 2 black 3 green 4 grey 5 yellow 6 red 7/1 white 9 orange PEM www.apem.com -21