SESSION 1A VENUE: ROOM 1 DATE: 25/07/2018 TIME: 9.00 10.30 AM CHAIRPERSON: ASSOC. PROF. DR. MOHD. SHAHRIR MOHD SANI (UMP) 1 P039 9.00-9.15 USING SINGLE-AXIS MULTIPOINT CONNECTION APPROACH FOR COUPLING TEST AND FINITE ELEMENT MODEL IN THE FREQUENCY BASED SUBSTRUCTURING METHOD W I I Wan Iskandar Mirza, M N Abdul Rani, D P Starbuck, M A Yunus, R Omar 2 P025 9.15-9.30 Presenter: WAN IMAAN IZHAN BIN WAN ISKANDAR MIRZA EXPERIMENTAL AND SIMULATION STUDY OF MILD STEEL RESPONSE TO LATERAL QUASI-STATIC COMPRESSION Omar Abdulhasan Lafta, Minah Mohammed Fareed and Md Radzai Bin Said 3 P083 9.30-9.45 Presenter: OMAR HASAN THE EFFECT OF LASER STITCH WELDING RESUAL STRESS ON THE DYNAMIC BEHAVIOUR OF THIN STEEL STRUCTURE M.A.S. Aziz Shah, M.A. Yunus, M.N. Abdul Rani, A.M. Saman, M.S. Mohd Sani, M.S. Mohd Zin 4 P082 9.45-10.00 Presenter: M.A.S. Aziz Shah FINITE ELEMENT ANALYSIS OF NON-UNIFORM CROSS-SECTION FUNCTIONALLY GRADED COMPOSITE BEAM SUBJECTED TO THERMO- MECHANICAL LOADING Abdolreza Toudehdehghan, J. Mathews 5 P013 10.00-10.15 Presenter: ABDOLREZA TOUDEHDEHGHAN STAINLESS STEEL 316L-HYDROXYAPATITE COMPOSITE VIA METAL INJECTION MOULDING: MECHANICAL AND PHYSICAL PROPERTIES W.S.W.Harun, N.A.Johari 6 P008 10.15-10.30 Presenter: NURUL AIN BINTI JOHARI MODELING AND VERIFICATION OF TRACTOR RE MODEL M. Hafiz Harun, P. M. Samin, S. A. A. Bakar, K. Hudha Presenter: IR. MOHAMAD HAFIZ BIN HARUN
SESSION 1B VENUE: ROOM 2 DATE: 25/07/2018 TIME: 9.00 10.30 AM CHAIRPERSON: ASSOC. PROF DR SYARIFAH NUR AQA SYED AHMAD (UMP) 1 P016 9.00-9.15 SYNTHESIS AND CHARACTERIZATION OF LIME DERIVED SOL BASE CATALYST FOR TRANSESTERIFICATION REACTION Fei-ling, Pua, Nur Afiqah Fauzan, Mohd Aizat Mohd Nasir, Rohaya Othman,Sharifah Nabihah Syed Jaafar, Koguleshun Subramaniam 2 P019 9.15-9.30 Presenter: DR. PUA FEI LING @ GRACE PUA REVIEW OF BENDING STRESS ON GFRC HONEYCOMB PANEL SANDWICH STRUCTURE FOR A CHASSIS LIGHTWEIGHT VEHICLE E.S. Arbintarso, H.F., Datama, R.N.W. Aviyanto, B. Prasetya, U.S.A.B. Purwokusumo, B. Aditiawan, P. Prenggo and R.B.S. Aji 3 P020 9.30-9.45 Presenter: ELLYAWAN S ARBINTARSO INFLUENCE OF SHOT PEENING ON STRESS CORROSION CRACKING IN ALUMINUM ALLOY (1100 H12) Hassan A.Abdulhadi, Basim H. Abbas, Shatha M. Rajaa, Khairallah S.Jabur 4 P067 9.45-10.00 Presenter: HASSAN SHAMARY INFLUENCE OF GEOMETRY ON TENSILE PROPERTIES OF WOVEN BURI PALM COMPOSITE A. S. F. Woon, J.P. Siregar, C. Tezara 5 P049 10.00-10.15 6 P068 10.15-10.30 Presenter: AUDREY SU FERN WOON 3D PRINTING: OVERVIEW OF PLA PROGRESS S.R. Subramaniam, S.K. Selvamani, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG OIL PALM EFB SUPPORTED SOL AC CATALYST FOR ESTERIFICATION REACTION: OPTIMIZATION AND PARAMETRIC EFFECTS STUDY Shamala Gowri, K., Fei-ling.Pua, Kumaran, P., Sharifah Nabihah Syed Jaafar Presenter: DR. PUA FEI LING @ GRACE PUA
SESSION 1C VENUE: ROOM 3 DATE: 25/07/2018 TIME: 9.00 10.30 AM CHAIRPERSON: ASSOC. PROF. DR. ABDUL ADAM ABDULLAH (UMP) 1 P069 9.00-9.15 FLOW ANALYSIS OF INTAKE PORT GEOMETRY OF SPARK IGNITION ENGINE USING SIMULATION Mohammad Abdullah Mohamad Johar, Mohd Farid Muhamad Said, Mohd Azman Abas, Zulkarnain Abdul Latiff, Mohd Rozi Mohd Perang 2 P004 9.15-9.30 Presenter: MOHAMMAD ABDULLAH MOHAMAD JOHAR SPRAY TIP PENETRATION OF INVERSED-DELTA INJECTION RATE SHAPING IN NON-VAPORIZING CONDITION M. Fareez, Y. Toyama, S. Saruwatari, S. Akiyama, T. Shimada, T. Aizawa 3 P073 9.30-9.45 Presenter: MOHD FAREEZ EDZUAN BIN ABDULLAH ACOUSTIC STUDY OF AN AIR INTAKE SYSTEM OF SI ENGINE USING 1- DIMENSIONAL APPROACH Afiq Aiman Dahlan, Mohd Farid Muhamad Said, Muhammad Hariz Khairuddin, Khairuldean Abd Kadir and Mohd Anuar Mohd Yusoff 4 P041 9.45-10.00 Presenter: AFIQ AIMAN DAHLAN THE EFFECTS OF HOT EXHAUST GAS RECIRCULATION (EGR) ON THE EMISSION AND PERFORMANCE OF A SINGLE-CYLINDER DIESEL ENGINE Muntasser A.A Mossa, Abdul Aziz Hairuddin, Nuraini A. A., J. Zulkiple, Hasyuzariza M. Tobib 5 P074 10.00-10.15 Presenter: ENG MUNTASSER AL ANBAGI PERFORMANCE AND EXHAUST GAS EMISSION OF BIODIESEL FUEL WITH ADDITIVE IN DIRECT INJECTION COMPRESSION IGNITION ENGINE C B How, N M Taib and M R A Mansor 6 P076 10.15-10.30 Presenter: NORHAYAH MAT TAIB COMPUTATIONAL FLU DYNAMIC (CFD) ANALYSIS FOR A-100kW LOW PRESSURE TURBINE TO RECOVER GAS TURBINE EXHAUST ENERGY A A Ahmad Zahidin, A M I Mamat, A Romagnoli Presenter: ASSOC. PROF. DR. AMAN MOHD IHSAN BIN MAMAT
SESSION 2A VENUE: ROOM 1 DATE: 25/07/2018 TIME: 2.30 3.45 PM CHAIRPERSON: DR. MUHAMAD NORHISHAM ABD. RANI (UITM) 1 P022 2.30-2.45 STUDY OF FREE VIBRATION ANALYSIS ON FIBER METAL COMPOSITE LAMINATES M.N.M.Merzuki, M.R.M.Rejab, M.S.M.Sani, D. Bachtiar, J.Siregar, Bo Zhang, Hazizie Hazuan Presenter: MOHAMAD NAZIRUL MUBIN BIN MERZUKI 2 P003 2.45-3.00 ADJUSTABLE VALVE SEMI ACTIVE SUSPENSION SYSTEM FOR PASSENGER CAR M.R. Ahmed, F.R.M. Romlay, A.R. Yusoff Presenter: Mohd Ragab 3 P023 3.00-3.15 DESIGN AND ANALYSIS OF LIGHTWEIGHT POLYETHERETHERKETONE (PEEK) FRONT LOWER CONTROL ARM F.T.Pawi, Rosdi Daud, H. Mas Ayu, Tedi Kurniawan, S.H. Tomadi, M.S. Salwani, A.Shah Presenter: ROSDI DAUD 4 P017 3.15-3.30 MODELLING AND ANALYSIS OF COMPOSITE B-PILLAR M I Ibrahim, M R M Rejab, H Hazuan and M F Rani Presenter: MOHD IRMAN IBRAHIM 5 P075 3.30-3.45 DYNAMIC ANALYSIS OF LOW FREQUENCY FBG ACCELEROMETER: AN INITIAL STUDY N. S. Khalih, M. F. B. Hassan, H. M. Hafizi Presenter: Norsyukriah Khalid
SESSION 2B VENUE: ROOM 2 DATE: 25/07/2018 TIME: 2.30 3.45 PM CHAIRPERSON: IR. DR. MOHD. AZMI BIN YUNUS (UITM) 1 P087 2.30-2.45 EXPERIMENTAL AND OPTIMIZATION STUDY ON THE OPERATING CONDITIONS OF HEAT PIPES IN EV BTMS USING RESPONSE SURFACE METHOD Faiza M. Nasir, Mohd Z. Abdullah, Mohd A. Ismail Presenter: FAIZA BINTI MOHAMED NASIR 2 P051 2.45-3.00 3D PRINTING: OVERVIEW OF ABS EVOLVEMENT S.K. Selvamani, S.R. Subramaniam, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG 3 P035 3.00-3.15 THE RELATIONSHIP OF VIBRATIONAL ENERGY DISTRIBUTION ON THE LEVEL OF DRIVER DETECTION Sabariah Mohd Yusoff, Joseph Giacomin Presenter: DR. SABARIAH MOHD YUSOFF 4 P045 3.15-3.30 AN INNOVATIVE AUTONOMOUS WHEELCHAIR CONVERSION KIT S. Yaakub, M. H. Alsibai Presenter: SALMA YAAKUB 5 P030 3.30-3.45 MAGNETIC NANOWIRES (Ni) VIA CHEMICAL REDUCTION METHOD U. Santip, W.K. Ngui, M. Samykano, K. Sudhakar, K. Kadirgama, A.G.N. Sofiah Presenter: DR. MAHENDRAN A/L SAMYKANO
SESSION 2C VENUE: ROOM 3 DATE: 25/07/2018 TIME: 2.30 3.45 PM CHAIRPERSON: ASSOC. PROF. DR. AMAN MOHD IHSAN MAMAT (UITM) 1 P054 2.30-2.45 INFLUENCE OF FUEL BOOSTER ON THE PERFORMANCE AND EMISSIONS OF DIESEL ENGINE A. M. Norkhizan, R. Mamat, A. Hamidi, A. F. Yusop Presenter: MUHAMAD NORKHIZAN ABDULLAH 2 P009 2.45-3.00 PERFORMANCE AND EMISSION OF COMPRESSION IGNITION (CI) ENGINE USING ETHANOL-DIESEL BLENDING AS A FUEL Shazlien Aini Kaulani, Zulkarnain Abdul Latiff, Mohd Rozi Mohd Perang, Mohd Faizal Hasan Presenter: DR. ZULKARNAIN ABDUL LATIFF 3 P037 3.00-3.15 AN EXPERIMENTAL INVESTIGATION ON THE COMBUSTION BEHAVIOR OF AN HCCI-DI ENGINE Hasyuzariza M. Tobiba, A. Aziz Hairuddina, Nuraini Abdul Aziza, M.M. Noorb, J. Zulkiplea, Muntasser A.A Mossaa Presenter: HASYUZARIZA BINTI MUHAMAD TOBIB 4 P080 3.15-3.30 A COMPARATIVE ANALYSIS ON EMISSIONS OF SOME NEXT GENERATION LONG-CHAIN ALCOHOL/DIESEL BLENDS IN A DIRECT- INJECTION DIESEL ENGINE. H Zurina, A Adam, G M Anes, Zuhaira Abdullah, M Fahmi, M Kamal, F Y Hagos Presenter: H Zurina 5 P005 3.30-3.45 SIMULATION OF PERFORMANCE AND COMBUSTION OF SINGLE CYLINDER HCCI ENGINE Ibham Veza, Mohd Farid Muhammad Said, Zulkarnain Abdul Latiff Presenter: IBHAM VEZA
SESSION 3A VENUE: ROOM 1 DATE: 26/07/2018 TIME: 9.00 10.30 AM CHAIRPERSON: DR SAIFUL ANWAR BIN CHE GHANI (UMP) 1 P024 9.00-9.15 DIFFERENT FLEXIBILITY FORMULAE FOR FE MODELLING AND ANALYSIS OF THE DYNAMIC BEHAVIOUR OF A STRUCTURE WITH BOLTED JOINTS R. Omar, M. N. Abdul Rani, M. A. Yunus, W. I. I. Wan Iskandar Mirza and M. S. Mohd Zin 2 P007 9.15-9.30 Presenter: Rohaizat Omar AN OPTIMAL CONTROL STRATEGY FOR HYDRAULIC HYBR VEHICLES TORQUE DISTRIBUTION BASED ON MULTI-OBJECTIVE GENETIC ALGORITHMS APPROACH. Hawary, Ahmad Faizul and Ramdan, Muhammad Iftishah 3 P001 9.30-9.45 Presenter: DR. MUHAMMAD IFTISHAH RAMDAN DESIGN AND ANALYTICAL STUDY OF TUBULAR LINEAR ELECTROMAGNETIC PULSING MOTOR AS ALTERNATIVE FOR ELECTRIC VEHICLE NM.Noor, I.Aris, S.Arof, Parveziqbal, A.K.M M.Norhisam 4 P081 9.45-10.00 Presenter: NORRAMLEE MOHAMED NOOR A COMPARATIVE STUDY OF THE VIBRATIONAL EFFECTS ON THE BOUNDARY CONDITIONS OF A SLENDER BEAM A R Bahari, M A Yunus, M N Abdul Rani, W I I Wan Iskandar Mirza and Haizuan A R 5 P027 10.00-10.15 Presenter: ABDUL RAHIM BAHARI A PILOT STUDY EVALUATING THE EFFICIENCY OF ELECTRIC BUS SHUTTLE SERVICES IN UTM CAMPUS M A Abas, M I Ardani, M Mohamad, C H Ling, S N Abdul Latif, S M F Syed Mohamad and A M Halim 6 P006 10.15-10.30 Presenter: MOHD IBTHISHAM ARDANI PERODUA MYVI PARALLEL HYBR HYDRAULIC PASSENGER VEHICLE FUEL ECONOMY SIMULATION ON MALAYSIAN DRIVE CYCLE, USING RULE- BASED CONTROL STRATEGY. Ramdan, Muhammad Iftishah and Hawary, Ahmad Faizul Presenter: DR. MUHAMMAD IFTISHAH RAMDAN
SESSION 3B VENUE: ROOM 2 DATE: 26/07/2018 TIME: 9.00 10.30 AM CHAIRPERSON: ASSOC. PROF. DR WAN AZMI WAN HAMZAH (UMP) 1 P044 9.00-9.15 DEVELOPMENT OF EVAPORATIVE INTERCOOLER HEAT EXCHANGER FOR VEHICLE USING CFD SIMULATION Pshtiwan Mohammad Sharif, A. Aziz Hairuddin, Azizan As arry and Khairil Anas Md. Rezali, M.M. Noor, Saman Mohammad Sharif 2 P021 9.15-9.30 3 P042 9.30-9.45 Presenter: PSHTIWAN MOHAMMAD SHARIF AIR FLOW OPTIMIZATION OF THE VEHICLE COOLING SYSTEM TEST RIG Lee Jun Hao, Zulkarnain Abdul Latiff, Mohd Rozi Mohd Perang, Mohd Farid Muhamad Said Presenter: MOHD ROZI MOHD PERANG THERMAL PERFORMANCE OF AUTOMOTIVE RADIATOR WITH GRAPHENE NANOPLATELETS SUSPENSION L. K. L. Toh, T. W. Ting 4 P057 9.45-10.00 5 P070 10.00-10.15 Presenter: LESLIE TOH NANOCELLULOSE AS HEAT TRANSFER LIQU IN HEAT EXCHANGER F.Benedict, K.Kadirgama, D.Ramasamy, M.M.Noor, M.Samykano, M.M.Rahman, Sagmesh B Presenter: ASSOC.PROF.TS. IR. DR.KUMARAN KADIRGAMA OPTIMISED MODELLING ON LATERAL SEPARATION OF TWIN-PONTOON- NET FLOATING BREAKWATER S.F. Abdullah, A. Fitriadhy, M. Hairil, M.F. Ahmad, A. Jusoh and M.M. Noor 6 P050 10.15-10.30 Presenter: DR. MOHD HAIRIL BIN MOHD PRELIMINARY INVESTIGATIONS OF ACRYLONITRILE BUTADIENE STYRENE (ABS) PROPERTIES S.K. Selvamani, S.R. Subramaniam, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG
SESSION 3C VENUE: ROOM 3 DATE: 26/07/2018 TIME: 9.00 10.30 AM CHAIRPERSON: ASSOC. PROF. DR. MOHD FAR BIN MUHAMAD SA (UTM) 1 P079 9.00-9.15 COMBUSTION CHARACTERISTICS OF BIODIESEL BLENDED WITH Al2O3 AND SiO2 NANOPARTICLES M.Akmal Adzmi, Adam Abdullah, Afif Naqiuddin 2 P071 9.15-9.30 Presenter: Mohd Akmal Adzmi FLOW COEFFICIENT AND DISCHARGE ANALYSIS IN SMALL ENGINE OF MOTORCYCLES USING STEADY-STATE FLOW BENCHES Bambang Wahono, Ocktaeck Lim 3 P059 9.30-9.45 Presenter: Bambang Wahono A REVIEW OF HYDROGEN ADDITION IN AN HCCI ENGINE FUELLED WITH BIOFUELS M S M Alias, A A Hairuddin, M K Hassan, K A M Rezali 4 P043 9.45-10.00 Presenter: MOHD SHAHRUDIN BIN MOHD ALIAS AN EXPERIMENTAL STUDY OF THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A COMPRESSION IGNITION (CI) ENGINE FUELLED WITH PALM OIL BASED BIODIESEL M. Norhafana, M.M.Noor, A.A. Hairuddin, Suria Idawati Ayob 5 P018 10.00-10.15 Presenter: NORHAFANA MOHAMED THE INFLUENCE OF INJECTOR PRESSURE ON FUEL GRADE ETHANOL (E96) FOUR STROKE COMBUSTION ENGINE H. Wibowo, Y. Syaefullah, A.A.P. Susastriawan, E.S. Arbintarso 6 P084 10.15-10.30 Presenter: ELLYAWAN S ARBINTARSO STABILITY AND PHYSIOCHEMICAL EVALUATION OF TRI-FUEL EMULSION (DIESEL-ETHANOL-BIODIESEL) WITH AND WITHOUT SURFACTANT M. Nazrul H. M. Bahrudin, M. Mukhtar N. A., Ftwi Y. Hagos, Rizalman Mamat, A. Adam Abdullah, Zainal Ambri Abdul Karim Presenter: DR. FTWI YOHANESS HAGOS
SESSION 4A VENUE: ROOM 1 DATE: 26/07/2018 TIME: 10.45-12.30 PM CHAIRPERSON: ASSOC. PROF. DR AHMAD RAZLAN YUSOFF (UMP) 1 P089 10.45 11.00 A MINI REVIEW: LEAN MANAGEMENT TOOLS IN ASSEMBLY LINE AT AUTOMOTIVE INDUSTRY M. Z. M. Ismail, A. H. Zainal, N.I. Kasim 2 P086 11.00 11.15 Presenter: AZIANASHIMA HEEDAYU ZAINAL SOLVING MOISTURE CONTAMINATED DAMPER OIL CONTROL PROBLEM USING TQM APPROACH Norzima Zulkifli, Noor Fadhili Bin Mohamad Fadhil 3 P029 11.15-11.30 Presenter: ASSOC. PROF. DR. NORZIMA ZULKIFLI THE IMPACT OF TECHNOLOGICAL INNOVATION CAPABILITIES ON COMPETITIVE ADVANTAGE AND FIRM PERFORMANCE Faridah binti Taju Rahim, Professor Dato Dr. Yuserrie bin Zainuddin 4 P028 11.30-11.45 5 P048 11.45-12.00 6 P088 12.00-12.15 Presenter: FARAH BINTI TAJU RAHIM COBALT NANOWIRES: ADVANCING INTO FUTURE NANOMATERIAL U. Santip, W.K. Ngui, M. Samykano, K. Sudhakar, K. Kadirgama, A.G.N. Sofiah Presenter: DR. MAHENDRAN A/L SAMYKANO PRELIMINARY INVESTIGATIONS OF POLYLACTIC AC (PLA) PROPERTIES S.R. Subramaniam, S.K. Selvamani, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG INVERSE METHOD FOR MATERIAL PROPERTIES ENTIFICATION OF KENAF REINFORCED COMPOSITE TEST MODEL C Peter, M N Abdul Rani, M A Yunus, A Kalam, M S Mohd Zin Presenter: CRYSTAL ANAK PETER
SESSION 4B VENUE: ROOM 2 DATE: 26/07/2018 TIME: 10.45-12.15 PM CHAIRPERSON: DR. DEVARAJAN A/L RAMASAMY (UMP) 1 P053 10.45 11.00 OPTIMIZATION-BASED POWER MANAGEMENT SYSTEM FOR AN ELECTRIC VEHICLE WITH A HYBR ENERGY STORAGE SYSTEM S. Gonsrang and R. Kasper 2 P015 11.00 11.15 3 P056 11.15-11.30 Presenter: S. GONSRANG TWO INPUTS OF ENERGY SOURCES IN ELECTRIC VEHICLE A.R.Asari, A.F. Faraid Presenter: ASHRAF ROHANIM ASARI THERMAL MANAGEMENT OF VEHICLE RADIATOR BY NANOCELLULOSE WITH ONE-DIMENSIONAL ANALYSIS F.Benedict, K.Kadirgama, D.Ramasamy, M.M.Noor, M.Samykano, M.M.Rahman, Sagmesh B 4 P031 11.30-11.45 Presenter: ASSOC.PROF.TS. IR. DR.KUMARAN KADIRGAMA ANALYSIS ON THE EFFECTS OF DECK L REAR SPOILER TO THE CAR AERODYNAMICS USING CFD METHOD A. Z. M. Alias, M. R. M. Nawi 5 P085 11.45-12.00 Presenter: DR MUHAD ROZI MAT NAWI DESIGN AND PARAMETRIC CHARACTERIZATION OF FLEXURE BEARING AS AUTOMOTIVE VALVE SPRING REPLACEMENT M. Razali Hanipah, Shahin Mansor, M.R.M. Akramin, Akhtar Razul Razali Presenter: DR. MOHD RAZALI HANIPAH
SESSION 4C VENUE: ROOM 3 DATE: 26/08/2016 TIME: 10.45 12.15 PM CHAIRPERSON: DR. FTWI YOHANESS HAGOS (UMP) 1 P072 10.45 11.00 AN INVESTIGATION OF THE GAS JET CHARACTERISTICS OF AN 800kPa CNG INJECTOR S Thongchai and O Lim 2 P077 11.00 11.15 Presenter: BAMBANG WAHONO INVESTIGATION AND ANALYSIS OF COMBUSTION CHARACTERISTICS, ENGINE PERFORMANCES AND EMISSIONS OF NEAT PALM OIL BIODIESEL-LONG CHAIN ALCOHOL FUEL BLENDS G M Anes, H Zurina, A. Zuhaira, A Adam 3 P026 11.15-11.30 Presenter: G M Anes ONE-DIMENSIONAL SIMULATION OF PORT WATER INJECTION USING FOR A SPARK IGNITION ENGINE C H Ling and M A Abas 4 P078 11.30-11.45 Presenter: DR. MOHD AZMAN BIN ABAS EFFECT OF BHA AND BHT ANTIOXANT ADDITIVES ON ENGINE PERFORMANCE AND EMISSION OF A CI ENGINE FUELED WITH PALM OIL METHYL ESTER-DIESEL BLEND Mohd Hafiz Ali, Mohd Hafizil Mohd Yasin, Adam Abdullah 5 P055 11.45-12.00 Presenter: Mohd Hafiz Ali WEAR TESTING ANALYSIS ON CYLINDER HEAD VALVE FOR CNG FUELED ENGINE N.W. Awang, D.Ramasamy, M. M. Rahman, M.M.Noor, K. Kadirgama Presenter: N.W. Awang