CONTENTS _ ALP QUICK LIFT PROFILE MAG PLATE pg. 2 DAYTON FLEET PMP pg. 2 MAGNETIC RECESS MEMBERS pg. 3 DAYTON UTILITY PMP pg. 3 MAGNETIC UTILITY RECESS pg. 4 RECESS INSERT MAGNETIC PLATE pg. 4 DAYTON SWIFT LIFT PMP pg. 5 ALP LIFTING PIN MAGNETIC HOLDING PLATE 2-piece pg. 5 DOG BONE PIN MAGNETIC RECESS MEMBERS 1-piece pg. 6 MAGNETIC COIL THREAD PROTECTOR pg. 6 MAGNETIC FERRULE LOCATORS pg. 7 NAILING COIL THREAD PROTECTOR pg. 8 MAGNETIC STEEL CHAMFER pg. 8 FLEXIBLE MAGNETIC URETHANE CHAMFER pg. 8 CUSTOM TRAPEZOIDS pg. 9 HOLE FORMER MAGNET pg. 9 DOUBLE SIDED MAGNET STRIP pg. 10 BUTTON MAGNETS 2.5 Ton / 1 Ton / ½ Ton pg. 11 BUTTON MAGNET LIFTING HANDLE & DEAD BLOW MALLET pg. 11 BUTTON MAGNET BRACKET pg. 12 ON/OFF MAGNET pg. 12 CAM MAGNET pg. 13 THORKAST RAIL MAGNETS pg. 13 UNISTRUT MAGNET pg. 14 LOAF MAGNETS pg. 15 STYROFOAM MAGNET pg. 16 VICTORY BEAR CLIP MAGNET pg. 16 FORM LINER MAGNET pg. 17 GROUT CONNECTION TUBE MAGNET pg. 18 MAGNETIC CONDUIT LOCATORS pg. 19 MAGNETIC PVC LOCATORS pg. 20 FLAT & RADIUS STEP FORMERS pg. 21 STEEL EMBEDDED WOOD MAGNET pg. 21 pg. 1
ALP QUICK LIFT PROFILE MAG PLATE Made in the USA Flat anchor magnetic holding plate with powerful magnetic circuits are designed for quick and efficient mounting and holding of recess members to steel forms eliminating the need for drilling holes in the form. Magnets attach to the flat anchor recess members and will outlast the recess member. Available for multiple brands of recess members. 2TPMP 4TPMP 8TPMP 2 Ton Quick Lift PMP 4 Ton Quick Lift PMP 8 Ton Quick Lift PMP DAYTON FLEET PMP Fleet Lift Magnetic Plate eliminates the need for drilling setting holes in the steel forms. A set of strong reliable magnets are built into the urethane base, these magnets along with an attached stud and setting screw work together to hold the fleet lift anchor tightly in position during the placement of concrete. Made In the USA 2TPMP 4TPMP 8TPMP 2 Ton Dayton Profile Mag Plate 4 Ton Dayton Profile Mag Plate 8 Ton Dayton Profile Mag Plate pg. 2
MAGNETIC RECESS MEMBERS The Flat Anchor magnetic recess member is designed with powerful magnetic circuits built in for quick and efficient mounting and holding of recess members to steel forms. Magnetic recess members are available in 2 ton, 4 ton and 8 ton sizes. Made in the USA 2TQLMRM 4TQLMRM 8TQLMRM Magnetic recess members 2 ton quick lift Magnetic recess members 4 ton quick lift Magnetic recess members 8 ton quick lift DAYTON UTILITY PMP The Dayton Superior Utility Anchor setting plug is manufactured from polyurethane with 90 and 45 anchor orientations. The reusable setting plug properly sets the anchor approximately ½ inch below the surface of the concrete and provides an adequate recess for easy sling attachment after final positioning of the concrete element, the recess formed by the recess member can easily be grouted or conveniently covered by utility anchor cover. Made In the USA UMP UMPOS UMPS Utility Profile Mag Plate Utility Profile Mag Plate Oversize Utility Profile Mag Plate Special X Mag pg. 3
MAGNETIC UTILITY RECESS UMR448 URM678 UMR679.440 Wire Utility Magnetic Recess Member 8 Long.670 Wire Utility Magnetic Recess Member 8 Long.670 Wire Utility Magnetic Recess Member 9 Long The Magnetic Utility Recess setting plug has internal magnets and is manufactured from polyurethane with 90 and 45 anchor orientations. The reusable setting plug properly sets the anchor approximately ½ inch below the surface of the concrete and provides an adequate recess for easy sling attachment. After final positioning of the concrete element, the recess formed by the recess member can easily be grouted or conveniently covered by utility anchor cover. Made In the USA RECESS INSERT MAGNETIC PLATE The Recess Insert Magnetic Plate eliminates the need for drilling setting holes in the steel forms. A set of strong reliable magnets are built into the urethane covered base, these magnets hold the recess tightly in position during the placement of concrete. Made in the USA 8TDSIMP 8TBSIMP 8TPSIMP Insert Mag Plate for Dayton Utility Recess Member and 8 Ton Fleet Insert Mag Plate for 8 Ton Burk Utility Recess Member Insert Mag Plate for 8 Ton Quick Lift Utility Recess Member pg. 4
DAYTON SWIFT LIFT PMP Swift lift magnetic setting plate is designed to firmly set recess plugs in steel precast concrete forms. The reusable urethane covered magnetic setting plate eliminates the need for drilled holes in the metal forms for anchor setting purposes. Made in the USA 2TMDBRM 2 Ton Dog Bone Recess Member 4TMDBRM 4 Ton Dog Bone Recess Member 8TMDBRM 8 Ton Dog Bone Recess Member 20 TMDBRD 20 Ton Dog Bone Recess Member ALP LIFTING PIN MAGNETIC HOLDING PLATE 2-piece Powerful magnets designed for quick and efficient mounting and holding of recess members to steel forms, whereby eliminating the need for drilling holes in the form. Magnets attach to the Lifting Pin Recess Members and will outlive the recess member. Available for multiple brands of recess members. Made in the USA 1TLPPMP 2TLPPMP 4TLPPMP 8TLPPMP 20TLPPMP Sizes 1 Ton 2 Ton 4 Ton 8 Ton 16/20 Ton pg. 5
DOG BONE PIN MAGNETIC RECESS MEMBERS 1-piece Designed to allow the installation of Lifting Pin Anchors in a steel form using a one-piece urethane recess with a magnet embedded in the top of the recess. Magnet fits all standard size Pin Inserts. Magnetic recess members are available in 1-Ton, 2-Ton, 4- Ton, 8-Ton and 16/20 Ton sizes. Made in the USA Size Diameter 1TDBMRM 1 Ton 2-3/8 2TDBMRM 2 Ton 2-7/8 4TDBMRM 4 Ton 3-3/4 8TDBMRM 8 Ton 4-5/8 20TDBMRM 16/20 Ton 6-3/8 MAGNETIC COIL THREAD PROTECTOR Magnetic Coil Locators have a threaded steel core with a powerful neodymium magnet built into the base. The base has a square pocket machined into it for the ½ drive removal tool. The core is encased in a urethane shell for easy removal from the concrete. Stud Diameter Stud Length CMB 500 1/2" 2-1/4 CMB 750 3/4" 2-1/2 CMB 1000 1 2-3/4 CMB 1250 1-1/4 2-3/4 CMB 1500 1-1/2 3-1/4 APPLICATION Magnetic locators are used to mount Coil thread protector to a steel form, instead of drilling holes. The magnetic base is 2-5/8 wide and recesses the coil insert by ½ inch. Magnet base is removed from the concrete using a ½ drive ratchet. Made in the USA pg. 6
MAGNETIC FERRULE LOCATORS Magnetic Ferrule Locators have a threaded steel core with a powerful neodymium magnet built into the base. The base has a square pocket machined into it for the ½ drive removal tool. The core is encased in a urethane shell for easy removal from the concrete. Made in the USA APPLICATION Magnetic locators are used to mount Ferrules to a steel form, instead of drilling holes. The magnetic base is 2-5/8 wide and recesses the Ferrule insert by ½ inch. Magnet base is removed from the concrete using a ½ drive ratchet. Ferrules are available in 1/4" 3/8", 1/2, 5/8", 3/4", 7/8", 1, 1-1/8, 1-1/4, and 1-1/2 thread diameters. Stud Diameter Stud Length Color FMB250 1/4-20 1/2" Black FMB375 3/8-16 1/2" Black FMB500 1/2-13 3/4" Black FMB625 5/8-11 3/4" Black FMB750 3/4-10 3/4" Black FMB875 7/8-9 3/4" Black FMB1000 1-8 3/4" Black FMB1125 1 1/8-7 1-1/2" Black FMB1250 1 ¼-7 2" Black FMB1500 1 ½-7 2 Black pg. 7
NAILING COIL THREAD PROTECTOR The Nailing Coil Thread Protector is used when attaching the thread protector to a wooden form. 500NCTP 750NCTP 1000NCTP ½ Nailing Coil Thread Protector ¾ Nailing Coil Thread Protector 1 Nailing Coil Thread Protector MAGNETIC STEEL CHAMFER Reusable, durable magnetic steel chamfer with integral magnets is designed to create beveled edges on corners and faces of concrete wall panels and small concrete items. Steel Chamfer is available in 10 foot lengths in ½ inch, ¾ inch, and 1 inch sizes. 10 foot lengths must ship by common carrier. Standard steel chamfer has magnets on one side and is also available with magnets on two sides. Made in the USA 500 SCH 1/2 X 10 Magnetic Steel Chamfer 750 SCH 3/4 X 10 Magnetic Steel Chamfer 1000 SCH 1 X 10 Magnetic Steel Chamfer FLEXIBLE MAGNETIC URETHANE CHAMFER Reusable, flexible urethane chamfer with integral magnets is designed to create beveled edges on the corners and faces of concrete wall panels and small concrete items, allowing for easy removal. * Patent Pending Made in the USA Height Length Urethane Durometer 500 FMC 60 1/2" 8 or 10 60 Shore For Flexible Applications 750 FMC 60 3/4" 8 or 10 60 Shore For Flexible Applications 1000 FMC 60 1 8 or 10 60 Shore For Flexible Applications 500 FMC 90 1/2" 8 or 10 90 Shore For Straight Applications 750 FMC 90 3/4 8 or 10 90 Shore For Straight Applications 1000 FMC 90 1 8 or 10 90 Shore For Straight Applications 1000 FMC 60 R 1 8 or 10 60 Shore For Straight Applications pg. 8
CUSTOM TRAPEZOIDS Trapezoids are custom made to your exact specification. Contact your local distributor with a drawing of the Trapezoid for your application. Your Distributor will work with TLK Precision to finalize your design. TLK Precision will submit a quote to your distributor for your approval. Delivery is approximately two weeks from receipt of purchase order. (Large orders may take longer) Available in lengths up to 10 Foot. Made in the USA HOLE FORMER MAGNET Interchangeable high-strength magnets together with a fiberglass hole former shell provide the fastest and easiest way to hold hole former's in place; saving time and money. The magnets are easily transferred from one hole former to another, reducing the number needed. Each magnet has more than 300 pounds of force for secure mounting of hole forms. Made in the USA Tension Capacity HFM Stainless steel Top Hole Former Magnet 500 LBS UHFM Urethane Hole Former Magnet 500 LBS pg. 9
DOUBLE SIDED MAGNETIC STRIP Double Sided Magnetic Strip Box Former Example Double Sided Magnetic Strip is made from fiberglass reinforced urethane with magnetic attraction on top and bottom of strip. Double-sided magnetic strip is made in eight-foot lengths and can be cut to size using sheet-metal sheers. * Patent Pending Made in the USA APPLICATION Double-Sided Magnetic Strip is used to quickly and efficiently attach box formers to the concrete form. DSMS 220 DSMS 170 1/4 Thick 1 Wide 3/16 Thick 1 Wide pg. 10
BUTTON MAGNETS 2.5 Ton - 1 Ton - ½ Ton Designed for supporting side rails or blockouts, the Button Magnet is engaged to steel form by impacting the button with a dead blow Mallet. Disengagement of the magnet is achieved with the use of a button magnet Lifting Handle. Button magnets are available in capacities of ½ ton, 1½ ton, & 2 ½ ton holding force. Made in the USA 1TBM 1 Ton Button Magnet 2TBM 2 ½ Ton Button Magnet 500TBM ½ Ton Button Magnet BUTTON MAGNET LIFTING HANDLE & DEAD BLOW MALLET BMLH DBM Button Magnet Lifting Handle Dead Blow Mallet pg. 11
BUTTON MAGNET BRACKET Note: Button Magnet & Bracket sold separately Designed for supporting wooden forms with a Button Magnet. The Bracket is bolted to the Button Magnet and screwed to the wooden form component. Made in the USA BMB Button Magnet Bracket ON/OFF Magnet The ON/OF Magnet is designed for strong adhesion of 1,500 lbs, on the bottom of the magnet only. The magnet body has four ½ -13 threaded holes on top for mounting form accessories. Easy 90 turn to on/off position using a 5/8 wrench. Made in the USA OOM6 ON / OFF Magnet 6 pg. 12
CAM MAGNET Part Number 1200 CM 8-1/2 CAM Magnet with Notch Tension Capacity The Cam Magnet is designed to be released from the steel form using built in cam release arm. The magnet has strong adhesion capacity of 1000 pounds per square foot along its sides and bottom. Available in different styles: Flat, Floating, Hole Former and Notch. Made in the USA Length Width Height Notch Height 1000 LBS 7-1/2 1-1/4 1-1/4 5/8 THORKAST RAIL MAGNET Powerful magnets designed to securely fit into the Thorkast rail s extruded profile for quick and efficient mounting and holding of the rail to steel forms. Minimum of three magnets for every ten feet of rail required to provide sufficient hold down force to keep the rail in place during placement of concrete. Available for four inch and six inch Thorkast rails. * Patent Pending Made in the USA 4RMTK 6RMTK 4 Rail Magnet Thorkast 6 Rail Magnet Thorkast pg. 13
UNISTRUT INSERT MAGNET The Unistrut insert magnet is designed to fit various channel profiles. The unique reinforced urethane flexible wing design allows the magnet to stay attached to the form while stripping the concrete product. A Minimum of 3 unistrut insert magnets required per 10 of channel for proper adhesion force. * Patent Pending Made in the USA APPLICATION The Unistrut insert magnets are used to mount various channel profiles to a steel form. UFWM4 Flexible Wing Unistrut Magnet pg. 14
LOAF MAGNETS Loaf Magnets are designed for many applications including holding steel rails and securing wood forms in place. Loaf Magnets are available in standard 3", 5", and 11" sizes. Optional brackets, such as loaf pillar attachment and pillar arm bracket are available. Custom brackets made to your design are also available. Made in the USA Part Number Tension Capacity Length Width at top Width bottom Height 3 LM 3 Loaf Magnet 300 LBS 3 2-1/8 1-13/16 1-1/2 5 LM 5 Loaf Magnet 1100 LBS 5 2-1/8 1-13/16 1-1/2 11 LM 11 Loaf Magnet 2200 LBS 11 2-1/8 1-13/16 1-1/2 Loaf Pillar Attachment Loaf Pillar Arm Loaf Pillar Arm assembly LP ATT LPA Loaf Pillar Attachment Loaf Pillar Arm pg. 15
STYROFOAM MAGNET Styrofoam Magnets are designed to pierce Styrofoam form components. A set of strong reliable magnets built into the base hold the Styrofoam form components tightly in position during the placement of concrete. Made in the USA SHMP SSTAM Styrofoam Mag Plate Styrofoam Star Mag Plate VICTORY BEAR CLIP MAGNET The Magnetic Base Clip is designed for use with rustications to fit easily and snugly along the length of the bottom of the piece for an alternative means of attachment, allowing the rustication unit to be reusable. Powerful rectangular magnets fit into rectangular cut-outs for holding the Base Clip in place. VB001 Clip Magnet pg. 16
FORM LINER MAGNET FLM001 FLM002 The Form Liner creates a textured concrete product. Using Embedded Magnet helps assure placement and error free concrete casting. FLM003 FLM001 FLM002 FLM003 Embedded Form Liner Magnet Embedded Form Liner Magnet Embedded Form Liner Magnet pg. 17
GROUT CONNECTION TUBE MAGNET The Grout Connection Tube Magnet is designed to fit into the end of the concrete accessories grouted connection tube to create a solid mount to the steel form as well as preventing concrete leakage into the form void. This design does not create a setback from the concrete face. Made In The USA HGCTM TGCTM High Grout Connection Tube Magnet Threaded Grout Connection Tube Magnet pg. 18
MAGNETIC CONDUIT LOCATORS The conduit locator magnet is designed for quick and efficient mounting of the electrical conduit to the steel form, thus eliminating the need to drill holes in the form. The conduit locator is available in 1/2 thickness by 2 5/8 diameter base for flat forms or for the exterior jacket of a radius form. A ½ inch socket is used for tightening and removing the plug. Made in the USA APPLICATION Magnetic Conduit locators are used to mount electrical conduit to a steel form. Conduit Coupler Size Diameter Length 750 UPC 3/4 1.00 0.76 1000 UPC 1 1.30 0.95 1250 UPC 1-1/4 1.64 1.20 1500 UPC 1-1/2 1.875 1.275 2000 UPC 2 2.35 1.30 pg. 19
MAGNETIC PVC LOCATORS MAGNETIC PVC Locators have a steel core with a powerful neodymium magnet circuit built into the base. The base has a threaded hole for removal from PVC pipe. The core is encased in a urethane shell sized to fit into schedule 40 PVC pipe. Made in the USA APPLICATION Magnetic PVC locators are used to mount schedule 40 PVC pipe to a steel form, instead of drilling holes. PVC Diameter Thread Diameter Color PVCPM 112 1-1/2 3/8 NC Black PVCPM 2 2 3/8 NC Black PVCPM 212 2-1/2 3/8 NC Black PVCPM 3 3 3/8 NC Black PVCPM 312 3-1/2 3/8 NC Black PVCPM 4 4 3/8 NC Black pg. 20
FLAT & RADIUS STEP FORMERS Contact your local distributor with your application. Made in the USA STEEL EMBEDDED WOOD MAGNET Steel embedded plate magnet was designed to be screwed onto wood form components to suspend the steel embedded plates on the top of wall panels and attaching plywood backed formliner to a form. WMMP 3/8 X 4 X 4 Mag Plate for Wood pg. 21