LOY M LOKS Expertise at your service The unique LOY cylinder construction offers reliable operation and ease of use in the most demanding applications.
LOY EXPERTISE T YOUR SERVIE LOY cam locks have been developed to meet the highest levels of security in the field of equipment locking. Our extensive range consists of both standard products and a wide selection of customised products. The superior benefits offered by LOY cam locks make them ideally suited to the most demanding, high security applications where valuables are located either behind small doors or in enclosers, e.g. vending machines, cash dispensers, gaming machines, parking meters, pay phones, coin-operated laundry machines etc. Our long experience in high security products and our high levels of expertise guarantee you the best possible choice for your particular application. 2
HIGH-SEURITY PERFETION The unique LOY cylinder construction, patented cylinders, strict key control and extensive masterkeying capabilities make LOY cam locks ideally suited for the most demanding applications. Unique construction ased on a unique operating principle which employs rotating detainer discs, LOY cam locks offer advantages that other locking systems cannot achieve. Masterkeying capabilities The several million different key combinations available mean that the LOY cylinder offers extensive master keying possibilities. ll LOY cylinder products can be made to operate with just a single key. User-friendly The disc control system and symmetrical key make LOY cam locks easy to operate. Resistance to harsh conditions The LOY cylinder contains no springs or pins which could cause it to malfunction in a wide range of environmental conditions. ll the components are hightly resistant to wear, dirt, moisture, corrosion or freezing conditions. Physical strength LOY cam locks combine excellence in design with the very latest engineering and production technology. dditional resistance to physical attacks is ensured by the use of case-hardened steel components. Virtually pickproof Only the correct key can align the gates on all the discs and permit the locking bar to disengage the cylinder from the housing. The LOY PROTE cylinder employs a new, patented disc blocking system (DS) which makes it impossible to manipulate the cylinder so that it opens without the correct key. PTENTED YLINDER TEHNOLOGIES These patented LOY cylinders feature symmetrical keys anbd disc steering system that provides smooth, reliable operation. oth LOY EXE and LOY PROTE have specialized features which make them ideally suited for particular applications. KEY SEURITY To guarantee maximum customer security LOY cylinder system offers a variety of key profiles and patented key security levels with a factory-controlled key service. ustomer level Exclusive keyways for applications where the highest level of key security is required. LOY EXE Nickel-silver key with heavyduty polymer key dow Patented key, key blank and cylinder construction Particularly suitable for industrial locking systems Exceptional picking and environmrntal resistance LOY PROTE ll metal key Patented key, key blank and cylinder construction Disc blocking system (DS) an be masterkeyed with doorlock cylinders Extensive range of LOY industrial locks available Factory level The supply of keys is controlled by either the LOY factory or an LOY sales office uthorised LOY dealer level Keys are supplied by an LOY authorised security centre under contract.
USTOMISED PERFETION Decades of experience in creating locking solutions for the most demanding applications has given us a clear understanding of the need for customisation in design, operation and levels of security. Working in close co-operation with our customers, we are dedicated to the search for no-compromise solutions which are a perfect match for your application. Your operational environment and functional requirements form the basis for a design process which ensures that the solutions developed will be easy to use and add significant value to your equipment. ll LOY locks are designed and produced using the latest manufacturing technology, guaranteeing high quality, rapid response and reliable delivery. 4
PROTETION IN EVERY FIELD The extensive range of LOY cam locks includes locks in a variety of sizes, which feature different modes of operation, making them ideally suited to a wide range of applications. We offer cam locks to fit almost any size, thickness or type of metal or wooden doors in universal and US dimensional specifications. WORLDWIDE REFERENES The most demanding security institutions and industries have trusted LOY locks since 107. Thousands of manufacturers in numerous countries have chosen LOY locks to secure their high-quality products, such as vending machines parking meters safe deposits gaming machines museum showcases mobile phone base stations transport containers switch cabinets rifles pay phones
THE RIGHT PRODUT FOR EVERY PPLITION Model Dimensions 22. 1. Product numbers am turns: key removable 0 /180 In locked position only 60 In locked and unlocked pos. Material of cylinder housing Number of discs Left hand operation possible ylinder type * ), P E D N L100 () M1x1 L101 (6) 4 28. 1. L10 (, 07D) M1x1 L106 (8) UNIVERSL RNGE M1x1 18.. 0. (L108), 2 (L10) 14.. L104 (, 04D) L10 (4, 0D) L107 (4) steel L108 7 M1x1 L10 7 8.0 (L108) (L10) 44.2 24 Max.1. 0. Ø L0 steel 7 4. 18.. L200 (, 06D) M1x1 L201 (0D) steel 44. 28. 1. L202 (7) M1x1 US RNGE 8. 22. 1. M1x1 L20 () 6. (L204), 4. (L20) 6 UL LISTED M1x1 18.. 22 8. (L204) (L20) = UL listed products L204 L20 (4) = Patented cylinder systems * ) = LOY LSSI P= LOY PROFILE steel steel D= LOY DISKLOK PRO E= LOY EXE N= LOY PROTE
LOY KEY OPERTED SWITH LOKS EP0, EP1, EP2 Dimensions LOY switch locks provide key-actuated switching for burglar alarms, control boxes and other high security applications. 22 0. - 22 4. 2 M1x1 2 16 The locks are available in three different models: EP0: key removable in on and off positions EP1: key removable in off position EP2: momentary-contact key removable in off position Locks can be fitted on panels from 0. mm to 22 mm thick. ircuit diagram NO N Microswitch: Electrical specifications: Honeywell 1SX1-H8 for contacting with MP 0.08 inch (1.47 mm) reseptables 7, 20 V 7 res., 28 VD 4 ind., 28 VD NO N Operational range: -4º to +120 º ylinder types:, P, E, D, N = common NO = normally open N = normally closed Material and finish: ylinder housing: First and last disc: Hex nut: oupling piece and switch mounting plug: Other parts: case-hardened chrome-plated steel case-hardened nickel-plated steel zinc-plated steel molded plastic LOY T-HNDLE LOKS L20, L21 Dimensions L20 2.. Ø17.8 Ø6.2 LOY T-handle locks are ideal for vending machines and other locking handle applications. Steel bolt provides maximum resistance against attack by pulling. 1 2 8. 44. The locks are available in two different models: L20: spring-loaded latch L21: deadlocking latch. L21 1 2 2. Ø17.8 ylinder types:, P, E, D, N Material and finish: ylinder housing: ylinder face: Latch: chrome-plated steel case-hardened chrome-plated steel nickel-plated steel 8. 44. R4.1 R.1 6.2 7
LOY M LOKS IN DETIL M TURNS UNIVERSL ND US SPEIFITIONS 16 Locked position Locked position Universal specification 22 7 x 7 0 Open position 180 180 M8 x 0.7 ylinder face ylinder end 180 Open position LOK TYPES L100 L10 L104 L10 L108 L10 L0 L200 L201 L202 L20 L204 L20 Open position LOK TYPES L101 L106 L107 US specification 22 ylinder face 16. ylinder end /-28 UNS-2 ONSTRUTION ND FINISH rass cylinder (two vertical marks on cylinder face) Steel cylinder (two horizontal marks on cylinder face) Detainer discs, cylinder drum and end nut: rass am, governer, nut lock washer and hex nut: Zinc-plated steel ylinder housing: hrome-plated Detainer discs, cylinder drum and end nut: rass am, governer, nut lock washer and hex nut: Zinc-plated steel ylinder housing: ase-hardened, chrome-plated steel First disc: Nickel-plated, case-hardened steel DIMENSIONS OF FITTING HOLE 1.1 16.1 WHEN ORDERING, PLESE SPEIFY Lock type ylinder type = LOY LSSI P = LOY PROFILE D = LOY DISKLOK PRO E = LOY EXE N = LOY PROTE Number of keys in LOY EXE and LOY DISKLOK PRO (to be ordered separately). In other cylinder types 2 keys/lock included. Key profile Finish of the cylinder housing, if not standard (chrome) M = H = satin chrome am type, if required (see page ) am turn (0 o, 180 o ) Fitting plate, if required 8
LOY M LOK ESSORIES MS For cam locks in the universal range, three different cam models available: straight, hooked and offset. ams are made of nickel-plated steel. ams for the US range of cam locks are available in the US sales office. Straight cam Part No. Offset cam Part No. 16 Hooked cam 4608 4481 4486 42 4460 4474 46 448 444 477 4606 Part No. 414 4460 4 442 44818 4780 44 26 0. 8 4 48 8 68 1 42. 47. 8 60. 18 22. 2 0 4 0 60 2 24 4.. 0 2. 1 17. 20. 28 4. 46 16 FITTING PLTES Fitting plates are made of steel and should be ordered separately. 26. 8. 2 18.2 16.2 1. 1.2 16.2 4. 1.2 21.2 1.2 21.2 7x7 7x7 7x7 10. 4678 44 4 4428 44 42 44816 447 47 44766 44667 407 44702 446 44700 4482 4477 44788 4461 6 6 8 8 4 4 4 48 0 61 24 2 28 28 2 0 0 42 1. 2. 10. 12 22 18. 1 7 1 8 1. 1 12. 18 1 1 1 16.2 18.2 2.8 1 24.8 2.2 41807 For use with plastic ring 484100 in glass doors. vailable also with finish, product number 41808 hrome-plated 48 Used inside of a wooden door to prevent the lock from rotating Fixed by screws through the upper holes of the plate Zinc-plated 4461 Used mostly as replacement for cam locks of universal specifications Normally used on both sides of the mounting hole Zinc-plated SPEIL ESSORIES 1. 2 7. 1. 0 26.8.8 1.2 Ø 2.2 1 1.2 21.7 1.4 1 16.2 1.2 4 Fitting plate 4414 Protective collar 80477 Lifting sleeve 80422
LOY the sign for security The quality and environmental systems used by bloy Oy guarantee that customers can be certain of LOY quality in every field. We received our first Quality System ertificate - SFS-EN ISO 001 - in 18. Just eight years later, bloy Oy was one of the first companies in Finland to be granted an SFS-EN-ISO 101 Environmental System ertificate. Our products are designed and manufactured not only to provide high levels of security, but also to be reliable, user-friendly and aesthetically pleasing. LOY is your sign for security. LOY is a registered trademark of bloy Oy, one of the leading manufacturers of locks, locking systems and architectural hardware and the world's leading developer of products in the field of electromechanical lock technology. The unique LOY detainer disc cylinder mechanism has several advantages over conventional locking mechanisms. Ever since its invention in 107, it has been a symbol of high security and superior performance. Our range consists of electromechanical locks, cam locks, padlocks, office furniture locks, rim locks, lock cases, cylinders for different types of mortice locks, door closers, door automatics and architectural hardware. LOY locking solutions for every application are available from our world-wide network of distributors. ustomer-oriented development, combined with our long experience and extensive security expertise, mean that LOY security solutions employ the very latest technology to meet your needs. bloy Oy Wahlforssinkatu 20 P.O. ox 108 FI-80101 JOENSUU FINLND Tel. +8 20 201 Fax +8 20 220 ISO 001 ISO 101 ERTIFIED ORGNISTION 8802026 0/2006 000 kpl, Suomen Painotuote, Joensuu