LATHE CHUCKS INDEPENDENT CHUCKS

LTHE HUKS INDEPENDENT HUKS 2015/2016

We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths to the benefit of customers. t RÖHM, we have set ourselves high targets and are doing our very best to achieve them. This is why we support our customers all over the world by means of the six performance indicators so typical of RÖHM: Dynamism Variety Security Partnership Globality Innovation

Table of contents LTHE HUKS I INDEPENDENT HUKS Key bar chucks with quick-acting jaw change system DURO-T 3009 DURO-T 3018 DURO-T XT 3025 Geared scroll chucks in steel design ZS - ZSU 3034 Orange Line 3042 ZS Hi-Tru 3048 ES 3059 KRF 3066 V 3070 dapter plates 3071 Independent chucks USE - USU 3074 UGE - UGU 3080 Errors and corrections are reserved!

Lathe chucks and Independent chucks Operation guide E ORNGE LIN TYPE DURO-T DURO-T DURO-T XT Operatione guide Key bar chucks with quick-acting jaw change system hucking capacities 3-630 mm ylindrical centre mount DIN 6350 ISO 702-3 (DIN 55027) Mount 3-646 mm ylindrical centre mount DIN 6350 ZS - ZSU Orange Line Geared scroll chucks 8-1190 mm Individual 2-1224 mm ylindrical centre mount DIN 6350 ISO 702-2 (DIN 55029) ISO 702-3 (DIN 55027) DIN 6350 VV (mounting from front) 3-315 mm ylindrical centre mount DIN 6350 Through-hole Number of jaws Types of jaws Workpiece Machining Rotating/ Stationary lamping lamping force Speed max. Precision Feature Page quick-acting jaw change system 3009 yes grinding chuck with quick-acting jaw change system 3018 weight reduced with splash water groove and control edge 3025 3034 3042 3-jaw chuck pipe flange 4-jaw chuck bar asymmetrical workpiece disc 3002 with splash water groove and control edge

Lathe chucks and Independent chucks Operation guide ZS Hi-Tru ES KRF USE - USU Geared scroll chucks hucking capacities UGE - UGU Independent chucks 2-315 mm 3-630 mm 2-200 mm ylindrical centre mount DIN 6350 ylindrical centre mount DIN 6351 ylindrical centre mount DIN 6350 Mount 20-1270 mm 8-1250 mm ylindrical centre mount ISO 702-2 (DIN 55029) ISO 702-3 (DIN 55027) ylindrical centre mount ISO 702-2 (DIN 55029) ISO 702-3 (DIN 55027) Through-hole Number of jaws Types of jaws Workpiece Machining Rotating/ Stationary lamping lamping force Speed max. Precision Feature radial precision adjustment, with special seal for grinding machines Page 3048 independently adjustable jaws 3059 keyless clamping, specially for measuring and grinding machines independently adjustable jaws 3066 3074 inside jaw + outside jaw reversible jaw rotating base jaw lenght machining stationary base and top jaw side machining selfcentering independently adjustable jaws 3080 independently adjustable 3003 Operation guide TYPE

Technical data Machine spindle noses for DIN and S 5.9 Machine spindle noses (not included in the scope of delivery) ISO 702-2 (DIN 55029 and S 5.9 D1) amlock fixing (ISO 702-2) Spindle nose size D E F Technical data Typ 1-2, 1-2 1: Tapped holes in flange (outer bolt circle) and inner bolt circle. From taper size 4 with driver. 3 92,1 53,985 11,1 31,8 3x15,1 70,66 4 117,5 63,525 11,1 33,3 3x16,7 82,55 5 146 82,575 12,7 38,1 6x19,8 104,8 6 181 106,390 14,3 44,5 6x23 133,4 8 225,4 139,735 15,9 50,8 6x26,2 171,4 11 298,5 196,885 17,5 60,3 6x31 235 15 403 285,800 19 69,9 6x35,7 330,2 20 546 412,800 21 82,5 6x42,1 463,6 Latest edition of relevant DIN standard applies in each case Spindle nose size Holes on outer bolt circle (F1) Outer bolt circle Holes on inner bolt circle (F2) Inner bolt circle -0,025 D E1 F1 E2 F2 1 (corresponds ISO 702-1) 5 133,4 82,575 14,288 22,2 11x 7/ 16-14 UN 104,8 8x 7/ 16-14 UN 61,9 6 165,1 106,390 15,875 25,4 11x 1/ 2-13 UN 133,4 8x 1/ 2-13 UN 82,6 8 209,5 139,735 17,462 28,6 11x 5/ 8-11 UN 171,4 8x 5/ 8-11 UN 111,1 11 279,4 196,885 19,05 34,9 11x 3/ 4-10 UN 235 8x 3/ 4-10 UN 165,1 15 381 285,800 20,638 41,3 12x 7/ 8-9 UN 330,2 11x 7/ 8-9 UN 247,6 20 520 412,800 22,225 47,6 12x 1-8 UN 463,6 12x 1-8 UN 368,3 * 2: Tapped holes in flange (outer bolt circle) without inner bolt circle. Spindle nose size Holes on outer bolt circle (F1) Outer bolt circle D E1 F1 2 (entspricht ISO 702-1) 3 92,1 53,985 11,1 15,9 3x 7/ 16-14 UN 70,66 4 108 63,525 11,1 19 11x 7/ 16-14 UN 82,55 5 133,4 82,575 12,7 22,2 11x 7/ 16-14 UN 104,8 6 165,1 106,390 14,3 25,4 11x 1/ 2-13 UN 133,4 8 209,5 139,735 15,9 28,6 11x 5/ 8-11 UN 171,4 11 279,4 196,885 17,5 34,9 11x 3/ 14-10 UN 235 15 381 285,800 19 41,3 12x 7/ 8-9 UN 330,2 20 520 412,800 20,6 47,6 12x 1-8 UN 463,6 1: Through-holes in flange (outer bolt circle), tapped holes in inner bolt circle - from taper size 4 with driver. 2: Through-holes in flange (outer bolt circle) without inner bolt circle. Spindle nose size Outer bolt circle Holes on inner bolt circle (F2) Inner bolt circle -0,025 D F1 G F1 E2 F2 1 5 133,4 82,575 14,288 22,2 11x11,9 104,8 8x 7/ 16-14 UN 61,9 6 165,1 106,390 15,875 25,4 11x13,5 133,4 8x 1/ 2-13 UN 82,6 8 209,5 139,735 17,462 28,6 11x16,7 171,4 8x 5/ 8-11 UN 111,1 11 279,4 196,885 19,05 34,9 11x20,2 235 8x 3/ 4-10 UN 165,1 15 381 285,800 20,638 41,3 12x23,4 330,2 11x 7/ 8-9 UN 247,6 20 520 412,800 22,225 47,6 12x26,6 463,6 12x 1-8 UN 368,3 * * From taper size 4 with driver Spindle nose size Outer bolt circle D G F1 2 3 92,1 53,985 11,1 15,9 3x11,9 70,66 4 108 63,525 11,1 19 11x11,9 82,55 5 133,4 82,575 12,7 22,2 11x11,9 104,8 6 165,1 106,390 14,3 25,4 11x13,5 133,4 8 209,5 139,735 15,9 28,6 11x16,7 171,4 11 279,4 196,885 17,5 34,9 11x20,2 235 15 381 285,800 19 41,3 12x23,4 330,2 20 520 412,800 20,6 47,6 12x26,6 463,6 3004

Techincal data Machine spindle noses for DIN and S 5.9 Machine spindle noses (not included in the scope of delivery) DIN 800, with thread Mean tol. g5 Minimum D E F M20 21 30 6,3 10 20 M24 25 36 8 12 24 M33 34 50 9 14 30 M39 40 56 10 16 35 M45 46 67 11 18 40 M52 55 80 12 20 45 M60 62 90 14 22 50 M76x6 78 112 16 30 63 M105x6 106 150 20 40 80 DIN 55021 From taper size 4 with driver Spindle nose size Holes on outer bolt circle (F1) Outer bolt circle Holes on inner boltcircle Inner bolt circle Technical data D E1 G F1 (F2) E2 F2 3 102 53,985 11 16 3xM10 3x10,5 75 - - 4 112 63,525 11 20 3xM10 3x10,5 85 - - 5 135 82,575 13 22 7xM10 4x10,5 104,8 8xM10 61,9 6 170 106,390 14 25 7xM12 4x13 133,4 8xM12 82,6 8 220 139,735 16 28 7xM16 4x17 171,4 8xM16 111,1 11 290 196,885 18 35 12xM20 6x21 235 11xM20 165,1 15 380 285,800 20 42 12xM24 6x25 330,2 11xM24 247,6 20 520 412,800 21 48 12xM24 6x25 463,6 11xM24 368,3 Form : Tapped holes and through-holes in flange (without inner bolt circle) Form : Tapped holes and through-holes in flange (outer bolt circle) and tapped holes in inner bolt circle ISO 702-1 (DIN 55026) From taper size 4 with driver Spindle nose size Holes on outer bolt circle Outer bolt circle Holes on inner bolt circle Inner bolt circle 1 D E1 F1 (F2) E2 F2 3 92 53,983 11-16 3xM10 70,6 - - 4 108 63,521 11-20 11xM10 82,6 - - 5 133 82,573 13 14,288 22 11xM10 104,8 8xM10 61,9 6 165 106,385 14 15,875 25 11xM12 133,4 8xM12 82,6 8 210 139,731 16 17,462 28 11xM16 171,4 8xM16 111,1 11 280 196,883 18 19,05 35 11xM20 235 8xM20 165,1 15 380 285,791 19 20,638 42 12xM24 330,2 11xM24 247,6 20 520 412,795 21 22,225 48 12xM24 463,6 11xM24 368,3 Form : Tapped holes in flange (outer bolt circle) without inner bolt circle. Form : Tapped holes in flange (outer bolt circle) and in inner bolt circle. ISO 702-3 (DIN 55027 und 55022) With bayonet ring fixing (ISO 702/III) * Spindle nose size D Number of holes x E 3 102 53,985 11 16 3x21 75 4 112 63,525 11 20 3x21 85 5 135 82,575 13 22 4x21 104,8 6 170 106,390 14 25 4x23 133,4 8 220 139,735 16 28 4x29 171,4 11 290 196,885 18 35 6x36 235 15 400 285,800 19 42 6x43 330,2 20 540 412,800 21 48 6x43 463,6 F * From taper size 4 with driver 3005

QUIK-TING JW HNGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire clamping range within a few seconds. On the other the key bar chucks convince with maximum clamping forces and maximum accurancy thanks to direct force transfer via the key bar system. Large, straight surfaces transmitting the force from the key bar to the jaw teeth guarantee long life and produce a very high clamping force combined with an accurancy which is twice high as required by DIN 6386. The high clamping force is achieved without much physical effort by manually turning the key. Video DURO-T 3006

KEY R HUK WITH QUIK-TION JW HNGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system are used successfully in areas where extremely high clamping forces, high concentricity and reliable long-term repeatability are required. Thanks to the quick-acting jaw change system, the jaws can be quickly and easily turned, changed or offset over the entire clamping range within a few seconds. DVNTGES T GLNE Key bar chuck with quick-action jaw Maximum clamping forces thanks to direct force transfer via the key bar system Maximum concentricity and axial run-out tolerance High user-friendliness thanks to quick-acting jaw change system huck body completely surfacehardened for maximum precision, even under extreme load Jaws in chuck ground out for concentricity Precise and high force transfer by means of key bar system Quick-acting jaw change system with pressure bolt for turning, exchanging and offsetting the jaws within a few seconds 3007

DURO-T Key bar chucks with quick-acting jaw change system The DURO-T key bar chuck guarantees maximum precision, maximum clamping force and is completely balanced ex works Key bar chucks DURO-T Principle of operation Thanks to the tangentially arranged threaded spindle (1), the force is transferred via a key bar (2) having an internal thread. The key bar moves the drive ring via a slide (3). Two other slides in the drive ring (4) transfer the forces to the other two key bars. The key bars having an inclined profile engage in the base jaws (5), thereby guaranteeing exact, centric clamping. The jaws can be quickly and easily turned, changed or offset over the entire clamping range within a few seconds. To do this, the key bars must be disengaged by turning the key to the left; the indicator pin (6) will project here. In this position, the jaws are secured against being hurled out in the event the machine spindle is started up unintentionally. Therefore, the gate valve (7) of each jaw must be unlocked via the corresponding pressure bolt (8) on the outer diameter of the chuck. Large, straight-line force transfer surfaces between the key bar and jaw toothing yield a very high clamping force over a long service life and precision which is twice as high as prescribed by DIN 6386. The high clamping force is achieved without exerting any special amount of force by manually turning the key. Lubrication To maintain the clamping force, rotary chucks must be lubricated regularly. You will find corresponding information in the operating instructions which are enclosed with every chuck. For easy maintenance, DURO-T chucks are equipped with three additional grease nipples on the front side. 6 5 8 1 7 2 3 4 3008

DURO-T Key bar chucks with quick-acting jaw change system PPLITION Optimized for turning applications, which require extremely high clamping forces, maximum concentricity, as well as reliable long-term repeatability. In combination with a base plate, stationary use on milling machines, dividing units and machining centers. TYPE Key bar chuck with quick-action jaw change system. Guaranteed maximum jaw precision as far as these are only used on the same chuck, and base and top jaws are kept screwed on for recurring work. USTOMER ENEFITS Maximum clamping force thanks to key bar system oncentricity and axial run-out tolerance twice as exact as required in DIN precision class 1 Very high jaw-change repeatability alanced and jaws in chuck ground out for concentricity TEHNIL FETURES - With jaw safeguard - huck body completely surface-hardened - Visual marking for quick jaw adjustment - External shape incl. splash-water edge - Fastening options for strongly stressed sliding surfaces - Incl. safety key - High corrosion protection Key bar chucks DURO-T 08 ylindrical centre mount Size Inch Through-hole mm With one-piece reversible jaws With base jaws and reversible top jaws D mm Speed max. min -1 Max. Torque Nm 125 5 32 437475-46,5 6000 40 23 160 6 1/4 42 437476 437490 63 5400 120 73 200 8 52 437477 437491 81 4600 155 114 250 10 62 437478 437492 92 4200 190 185 315 12 1/2 87 437479 437493 111 3300 210 240 400 15 3/4 102 437480 437494 118 2200 260 260 500 20 162 437481 437495 118 1900 320 290 630 25 252-437496 143 1100 350 320 1) at size 630 chuck body without convex outer contours Further sizes and mountings available on request Max. total clamping force kn 08 ISO 702-3 (DIN 55027), with studs and locknuts Size Mount short taper Through-hole mm With one-piece reversible jaws With base jaws and reversible top jaws D mm F mm Speed max. min -1 Max. Torque Nm 125 5 32 437499-67 104,8 6000 40 23 160 5 42 437501 437548 78 104,8 5400 120 73 160 6 42 437502 437549 85 133,4 5400 120 73 200 5 52 437504 437551 96 104,8 4600 155 114 200 6 52 437505 437552 97 133,4 4600 155 114 250 6 62 437509 437556 108 133,4 4200 190 185 250 8 62 437510 437557 110 171,4 4200 190 185 315 8 87 437512 437559 129 171,4 3300 210 240 315 11 87 437513 437560 131 235 3300 210 240 400 8 102 437515 437562 138 171,4 2200 260 260 400 11 102 437516 437563 138 235 2200 260 260 500 11 162 437519 437566 156 235 1900 320 290 500 15 162 437520 437567 163 330,2 1900 320 290 630 11 192-437568 165 235 1100 350 320 630 15 252-437569 167 330,2 1100 350 320 1) at size 630 chuck body without convex outer contours Further sizes and mountings available on request Max. total clamping force kn on request 3009

Jaws DURO-T 28 One-piece jaw E, set, diagonally toothing, hardened Key bar chucks with quick-acting jaw change system Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 212121 125 set 50 34 14 094000 160 set 77,7 45 20 094001 200 set 94,7 60 22 094002 250 set 114 70 26 094003 315 set 130 79 32 094043 400/500 set 167 93 45 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws DURO-T 28 Unstepped Jaw L, set, diagonally toothing, unstepped, soft, material 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 304864 125 set 53 34 14 241699 160 set 84,4 45 20 249678 200 set 98,4 60 22 249679 250 set 118,7 70 26 249680 315 set 136,6 79 32 249681 400/500 set 173,6 93 45 28 Reversible top jaw U, set, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 094012 160 set 61,5 32,5 20,4 094013 200 set 70,5 38 24,4 094014 250 set 92 50 34,4 094015 315 set 107 56 35,7 094045 400/500 set 130 72 50,4 140715 630 Satz 185 102 68 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 28 Unstepped top jaw, set, standard design, soft, material 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 212123 125 set 55 25,5 20,7 094008 160 set 85 36,5 20,3 094009 200 set 105 40 22 094010 250 set 125 50 30,4 094011 315 set 145 50 34,3 094046 400/500 set 180 73 50,5 140716 630 set 260 102 68 28 Unstepped top jaw, set, extendend design, soft, material 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 137055 160 set 85 42,5 24,4 137056 200 set 105 51 34,3 137057 250 set 125 75 50,5 137058 315 set 145 74 50,5 onfigure your individual clamping jaws online! www.web2product.biz 3010 on request

Jaws DURO-T Key bar chucks with quick-acting jaw change system 28 ase jaw G, set, diagonally toothing, with mounting bolts Item no. huck Size ontents of delivery Jaw length Jaw width 212119 125 set 47 14 094004 160 set 74 20 094005 200 set 90 22 094006 250 set 110 26 094007 315 set 125 32 094044 400/500 set 160 45 140194 630 set 230 65 21 Reversible claw-type top jaws, standard design, tongue and groove, large clamping range, 1 piece hardened Item no. huck Size Jaw length Jaw height Jaw width Jaws DURO-T 137060 160 66 37,5 24 137119 400/500 124 62 50 151289 630 144 78 70 21 Reversible claw-type top jaws, standard design, tongue and groove, small clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137061 160 66 37,5 20 137064 200 81 43 24 137108 250 90 55 34 137114 315 100 62 34 137120 400/500 124 62 50 21 Reversible claw-type top jaws, standard design, tongue and groove, middle sized clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137062 160 56 37,5 20 137065 200 66 43 24 137109 250 72 55 34 137115 315 86 62 34 137121 400/500 100 62 50 21 Reversible claw-type top jaws, large design, tongue and groove, small clamping range, 1 piece hardened Item no. huck Size Jaw length Jaw height Jaw width 137066 160/200 79 43 34 137110 250 80 55 50 137116 315 93 62 50 onfigure your individual clamping jaws online! www.web2product.biz on request 3011

Jaws DURO-T Key bar chucks with quick-acting jaw change system 21 Reversible claw-type top jaws, large design, tongue and groove, large clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137067 160/200 81 43 34 137111 250 90 55 50 137117 315 106 62 50 Jaws DURO-T 21 Reversible claw-type top jaws, large design, tongue and groove, middle sized clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137068 160/200 66 43 34 137112 250 72 55 50 137118 315 86 62 50 21 Draw-down jaws, without clamping inserts, diagonally toothing, 1 piece, without clamping inserts Item no. huck Size Jaw length Jaw height Jaw width 141037 160 84,4 43,5 20 141039 200 98,4 47,5 22 141041 250 118,7 58,5 26 141043 315 136,4 63,9 32 141045 400/500 173,6 73,4 45 21 Draw-down jaws, additional clamping range, for interchangeable clamping inserts, diagonally toothing, 1 piece, without clamping inserts Item no. huck Size Jaw length Jaw height Jaw width 141038 160 84,4 43,5 20 141040 200 98,4 47,5 22 141042 250 118,7 58,5 26 141044 315 136,4 63,9 32 141046 400 173,6 73,4 45 141048 500 173,6 73,4 45 onfigure your individual clamping jaws online! www.web2product.biz 3012 on request

Jaws DURO-T Key bar chucks with quick-acting jaw change system 15 Interchangeable clamping inserts, 1 piece with claws Item no. huck Size 141049 160/200 141052 250/315 141055 400/500/630 15 Interchangeable clamping inserts, 1 piece with serrated toothing Item no. huck Size 141050 160/200 141053 250/315 141056 400/500 Jaws DURO-T 15 Interchangeable clamping inserts, 1 piece with heat treatable surface Item no. huck Size 141051 160/200 141054 250/315 141057 400/500 15 Jaw mounting bolt, piece Item no. Size Thread ontents of delivery 243893 125 M6x10 piece 200182 160/200 M8x1x22 piece 200183 250 M12x1,5x30 piece 202402 315 M12x1,5x35 piece 227618 400/500 M16x1,5x40 piece 249388 630 M20x50 piece on request 3013

Key bar chucks with quick-acting jaw change system ccessories DURO-T 08 ase plate with fixing slots omplete with mounting screws and fixed T-slot nuts. Other sizes available on request. 08 Key Item no. Size Item no. Size Square L mm ccessories DURO-T 143163 160 212124 125 8 85 143165 200 094016 160 10 140 143167 250 094017 200 12 160 094018 250 14 220 094019 315 17 230 094047 500 19 250 332938 630 24 410 Only for stationary used chucks 08 Safety key 08 hip guard, set Item no. Size Square L mm Item no. Size ontents of delivery 242172 125 8 85 212122 125 set 242173 160 10 140 236439 160 set 242174 200 12 160 236440 200 set 242175 250 14 220 236441 250 set 242176 315 17 230 236442 315 set 242177 500 19 250 236443 500 set 332939 630 24 410 corresponding with DIN 1550 for rotating chucks 15 Special grease F80 for lathe chucks For lubrication and conservation of chucking power Item no. Design ontents 308555 artridge 0,5 kg 028975 Tin 1 kg 3014 on request

Technical Data DURO-T Technical Data DURO-T 1 E N G O H L Q F J K D α P huck size 125 160 200 250 315 400 500 630 Outer diameter 1 128 164 206 256 322 407 507 630 Jaw movement 4,8 6,2 6,8 8 10,2 12,5 12,5 14 ore 32 42 52 62 87 102 162 252 ore cab be enlarged max. 35 45 55 75 102 130 180 270 D 46,5 63 81 92 111 118 118 143 E H6 115 145 185 235 300 380 460 580 F 4 5 5 6 6 6 6 6 G 100 125 160 200 250 315 400 520 H 3xM8 3xM10 3xM12 3xM16 3xM20 3xM24 3xM24 3xM24 J 12 15 18 25 30 37 37 37 K 22,5 31,5 43 47 59 57,7 57,5 72 L 32,5 42 53,5 66,5 86 110 152,5 196 M SW8 SW10 SW12 SW14 SW17 SW19 SW19 SW24 N 117 182 211 284 309 359 356 570 O 180 210 270 450 500 600 600 600 P 8,5 13 14 17 21 25 25 29 Min. thickness of flange Q 17 30 30 35 35 40 45 55 Moment of inertia GD2 1) kgm 2 0,01 0,03 0,10 0,29 0,87 2,37 5,78 17,04 21 o 35 22 o 18 o 19 o 17 o 20 o 42 o 69 o 30 approx. kg kg 4,0 9,3 18,6 34,5 64 112 166 300 1) The moment of inertia was measured with base jaws but without top jaws or back plate The bore could be enlarged (measure, at surcharge) Enlarged bore max. Technical Data DURO-T Max. permissible speed The maximum permissible speed has been fixed so that 1/3 of the gripping force is still available as residual gripping force if the maximum grippping is applied and the chuck is fitted with its heaviest jaws. The jaws may not project beyond the outside diameter of the chuck. The chuck must be in perfect condition. The specification DIN 6386 Part 1 shall be observed. huck size 125 160 200 250 315 400 500 630 Max. speed min-1 6000 5400 4600 4200 3300 2200 1900 1100 Gripping force The gripping force is the sum total of all jaw forces acting radially on the stationary workpiece. The specified gripping forces are standard values. They apply to chucks in a perfect condition which have been lubricated with RÖHM grease F79 and F80. huck size 125 160 200 250 315 400 500 630 Torque applied on key 1) Nm 10 40 60 70 80 90 100 100 Total gripping force 1) kn 8,5 30 48 66 80 95 102 102 Torque applied on key Nm 40 120 155 190 210 260 320 350 Max. total gripping force kn 23 73 114 185 240 260 290 320 1) maintaining the accuracy t this torque the clamping jaws have been ground at the factory, for testing the chuck must be clamped with this torque huck capacities of jaw steps huck size 125 160 200 250 315 400 500 630 External chucking 1 3-30 5-51 7-70 8-97 12-131 16-168 40-256 20-322 2 31-65 45-91 58-123 82-172 93-216 119-278 167-360 200-490 3 63-97 89-135 114-179 - - - - - Jaw position 4 95-129 115-161 142-207 163-253 201-323 260-413 308-501 360-650 J1 26-59 67-105 71-131 99-182 102-213 120-272 166-360 184-489 Internal chucking J2 57-91 93-132 99-159 - - - - - J3 89-123 135-174 154-214 178-261 207-319 260-412 306-500 341-646 3015

Jaw dimensions DURO-T Jaw dimensions DURO-T Reversible one-piece jaw E, hardened and ground, jaw steps not ground lock jaw L, unstepped, soft, thread and jaw guides hardened and ground huck size 125 160 200 250 315 400+500 50 77,7 94,7 114 130 167 14 20 22 26 32 45 34 45 60 70 79 93 D 10,7 20,6 23 41,5 40,2 50,5 E 16 18,9 19,5 40,3 54 71 F 16 22 28 - - - G 29 37,5 50 56 64 73 H 24 30 40 - - - J 19 22,5 30 42 49 53 K - 8 10 13 13 20 L - 16 15 19,5 19,5 30 Jaw approx. kg 0,400 0,500 0,635 1,135 1,835 3,665 Jaw dimesions DURO-T Reversible top jaw U, completely hardened, cross tenon ground, jaw steps not ground Unstepped soft top jaw, for turning out special chucking diameters Dimensions for extendend design ase jaws G, hardened and ground huck size 125 160 200 250 315 400+500 53 84,4 98,4 118,7 136,6 173,6 14 20 22 26 32 45 34 45 60 70 79 93 Jaw approx. kg 0,435 0,500 0,900 1,535 2,400 5 huck size 160 200 250 315 400+500 630 61,5 70,5 92 107 130 185 20,4 24,4 34,4 35,7 50,4 68 37 43 55 62 79 110 D 8 10 12 12 18 24 E 3 3,5 3,5 3,5 4,5 4,5 F 32,5 38 50 56 72 102 G 22,5 25,5 30 35,5 41,4 59 H 18 20 20 26 30 40 J 7 10 10 14 15 21 K 32 40 40 54 60 82 L 26,5 28,5 41 40 51 80 M 13 14 40,5 54 71 80 N 17,5 18 22 26 32 42 O 25 28 36 41 52 72 P 23,5 29 39 40 57 82 Q 9 9 14 14 18 22 R 15 15 20 20 26 33 T 1) 38,5 45 57 63,6 80,6 114 Jaw approx. kg 0,200 0,335 0,800 1,135 2,535 6,350 1) Dimension marked on base jaw huck size 125 160 200 250 315 400+500 630 55 85 85 105 105 125 125 145 145 180 260 20,7 20,3 24,4 22 34,3 30,4 50,5 34,3 50,5 50,5 68 31,3 41 47 45 56 55 80 56 80 80 110 D 14 8 8 10 10 12 12 12 12 18 24 E 3,3 3 3 3,5 3,5 3,5 3,5 3,5 3,5 4,5 4,5 F 25,5 36,5 42,5 40 51 50 75 50 74 73 102 G 25 42 42 50 50 70 70 74 74 100 150 H 5 18 18 20 20 20 20 26 26 30 40 J 7,5 7 7 10 10 10 10 14 14 15 21 K 20 32 32 40 40 40 40 54 54 60 82 P 24 27,5 33,5 31 42 39 54 34 48 58 83 Q 6,5 9 9 9 9 14 14 14 14 18 22 R 11 15 15 15 15 20 20 20 20 26 33 S M6 M8x1 M8x1 M8x1 M8x1 M12x1,5 M12x1,5 M12x1,5 M12x1,5 M16x1,5 M20 T 1) 32 42,5 48,5 47 58 57 72 57,6 71,6 81,6 114 U 18 19,5 25,5 23 34 27 42 22 36 42 63 Jaw approx. kg 0,200 0,435 0,600 0,735 1,400 1,500 3,700 2,265 4,800 4,500 13,350 1) Dimension marked on base jaw huck size 125 160 200 250 315 400+500 630 47 74 90 110 125 160 230 14 20 22 26 32 45 65 21 19 23 26 30 35 52 D 5 18 20 20 26 30 40 E - 5 5,5 5,5 6,5 7,5 9 F - 8 10 12 12 18 24 G 2,8 2,5 3 3 3 4 4 H 3,55 6 7 7 7,6 8,6 12 J 7,5 7 10 10 14 15 21 K M6 M8x1 M8x1 M12x1,5 M12x1,5 M16x1,5 M20 L 20 32 40 40 54 60 82 M 72 103 129 163 196 250 294 399 Jaw approx. kg 0,200 0,265 0,365 0,700 1,065 2,350 5,665 3016

hucking capacities DURO-T hucking capacities DURO-T Reversible claw-type top jaws K, standard design Reversible claw-type top jaw, large clamping range huck size 160 400 500 630 Item no. 137060 137119 137119 151289 apacities external Ø min. - max. 142,5-187,5 314-446 311-534 391-670 apacities internal Ø min. - max. 22,5-67,5 99-231 95-317 176-456 Interfering contour 224 528 592 800 Reversible claw-type top jaw, small clamping range huck size 160 200 250 315 400 500 Item no. 137061 137064 137108 137114 137120 137120 apacities external Ø min. - max. 37,5-82,5 56-116 90-170 82-210 142-274 139-360 apacities internal Ø min. - max. 133-178 160-220 177-257 242-370 301-433 266-488 Interfering contour 209 264 330 446 535 592 Reversible claw-type top jaw, medium clamping range huck size 160 200 250 315 400 500 hucking capacities DURO-T Item no. 136062 137065 137109 137115 137121 137121 apacities external Ø min. - max. 103-148 117-181 167-248 178-306 270-402 267-489 apacities internal Ø min. - max. 71-116 91-155 100-184 97-225 142-274 139-361 Interfering contour 209 264 330 396 504 592 3017

Key bar chucks with quick-acting jaw change system DURO-T - sealed design PPLITION Specially for grinding machines. Optimized for extremely high clamping forces, maximum concentricity, as well as reliable long-term repeatability. TYPE Key bar chuck with quick-action jaw change system. Guaranteed maximum jaw precision as far as these are only used on the same chuck, and base and top jaws are kept screwed on for recurring work. USTOMER ENEFITS Maximum clamping force thanks to key bar system With cover for protection against dust on the face Very high jaw-change repeatability Key bar chucks DURO-T TEHNIL FETURES - With jaw safeguard - huck body completely surface-hardened - Visual marking for quick jaw adjustment - External shape incl. splash-water edge - Fastening options for strongly stressed sliding surfaces - Incl. safety key - High corrosion protection 08 ylindrical centre mount Size Inch With base jaws With inside and outside jaw D mm Speed max. min -1 Max. Torque Nm Max. total clamping force kn 160 6 1/4 439606 439605 63 5400 120 73 200 8 439608 439607 81 4600 155 114 250 10 439610 439609 92 4200 190 185 Further sizes and mountings available on request 3018 on request

Jaws DURO-T 28 Outside jaw D, set, inward stepped jaw, hardened Key bar chuck with quick-action jaw change system Item no. huck Size ontents of delivery Jaw width 329041 160 set 20 329042 200 set 22 329043 250 set 26 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 28 Inside jaw, set, outward stepped jaw, hardened Item no. huck Size ontents of delivery Jaw width 329038 160 set 20 329039 200 set 22 329040 250 set 26 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws DURO-T 28 Unstepped top jaw, set, soft, material 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 329044 160 set 90 36,5 20,3 329045 200 set 100 40 22 094010 250 set 125 50 30,4 28 ase jaw G, set, hardened, with mounting bolts Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 329047 160 set 74 8 20 329048 200 set 90 10 22 329049 250 set 110 12 26 15 Jaw mounting bolt, 1 piece Item no. huck Size Thread ontents of delivery 200182 160/200 M8x1x22 piece 200183 250 M12x1,5x30 piece onfigure your individual clamping jaws online! www.web2product.biz on request 3019

Key bar chuck with quick-action jaw change system ccessories DURO-T 08 ase plate with fixing slots omplete with mounting screws and fixed T-slot nuts. Other sizes available on request. 08 Key Item no. Size Square L mm Item no. Size 094016 160 10 140 143163 160 143165 200 143167 250 094017 200 12 160 094018 250 14 220 Only for stationary used chucks ccessories DURO-T 08 Safety key Item no. Size Square L mm 242173 160 10 140 242174 200 12 160 242175 250 14 220 corresponding with DIN 1550 for rotating chucks 08 hip guard, set Item no. Size ontents of delivery 236439 160 set 236440 200 set 236441 250 set 08 Special grease F80 for lathe chucks For lubrication and conservation of chucking power Item no. Design ontents 308555 artridge 0,5 kg 028975 Tin 1 kg 3020 on request

Technical data DURO-T Technical data DURO-T 1 E N G O H L Q F J K D α P huck size 160 200 250 Outer diameter 160 206 255 Jaw movement 6,2 6,8 8 ore 42 52 62 ore can be enlarged max. 45 55 75 D 63 81 92 E H6 145 185 235 F 5 5 6 G 125 160 200 H 3xM10 3xM12 3xM16 J 15 18 25 K 31,5 43 47 L 42 53,5 66,5 M SW10 SW12 SW14 N 182 211 284 O 210 270 450 P 13 14 17 Min. thickness of flange Q 30 30 35 Moment of inertia 1) kgm 2 0,03 0,10 0,29 22 18 19 Weight approx kg 9,5 20 35 1) The moment of inertia was measured with base jaws but without top jaws or back plate The bore could be enlarged (measure, at surcharge) Enlarged bore max. Technical data DURO-T Max. permissible speed The maximum permissible speed has been fixed so that 1/3 of the gripping force is still available as residual gripping force if the maximum grippping is applied and the chuck is fitted with its heaviest jaws. The jaws may not project beyond the outside diameter of the chuck. The chuck must be in perfect condition. The specification DIN 6386 Part 1 shall be observed. huck size 160 200 250 Max. speed min-1 5400 4600 4200 Gripping force The gripping force is the sum total of all jaw forces acting radially on the stationary workpiece. The specified gripping forces are standard values. They apply to chucks in a perfect condition which have been lubricated with RÖHM grease F79 and F80. huck size 160 200 250 Torque applied on key in1) Nm 20 30 35 Total gripping force1) kn 15 24 33 Torque applied on key in Nm 120 155 190 Max. total gripping force kn 73 114 185 1) maintaining the accuracy hucking capacities of jaw steps huck size 160 200 250 External chucking 1 5-51 7-70 8-97 2 45-91 58-123 82-172 3 89-135 114-179 - Jaw 4 115-161 142-207 163-253 position. J1 67-105 71-131 99-182 Internal chucking J2 93-132 99-159 - J3 135-174 154-214 178-261 huck dimensions DURO-T - Main dimensions (other dimensions on the table on the top) huck size 160 200 250 Outer diameter 160 206 255 External chucking with -jaws 3-46 3-60 5-66 External chucking with D-jaws 23-160 32-200 65-243 Internal chucking with jaws 28-156 32-195 47-225 entral bor for coolant 13 13 13 70 85 92 D 5 6 5 3021

Jaw dimensions and chucking capacity DURO-T Jaw dimensions and chucking capacity DURO-T Outward stepped jaw huck size 160 200 250 46 55 60 20 22 26 max. 95 120 143,5 min. 72 91 113 D 5 7 6 E 6 6 8 Jaw approx. kg 0,465 0,643 1,065 Jaw dimensions and chucking capacity Inward stepped jaw D Unstepped soft top jaw huck size 160 200 250 43 50 50 20 22 26 max. 95 120 143,5 min. 72 91 113 D 5 7 6 E 6 6 8 Jaw approx. kg 0,435 0,600 1,065 huck size 160 200 250 90 100 125 20,3 22 30 41 45 55 D 8 10 12 E 3 3,5 3,5 F 36,5 40 50 G 55 61 70 H 18 20 20 J 6 6 10 K 30 32 40 P 27,5 31 39 Q 9 9 14 R 15 15 20 S M8x1 M8x1 M12x1,5 U 19,5 23 27 Jaw approx. kg 0,435 0,800 1,500 ase jaw G huck size 160 200 250 74 90 110 20 22 26 17 19 26 D 18 20 20 E 5 5,5 5,5 F 8 10 12 G 2,5 7 7 H 6 20 20 J 7 6 10 K M8x1 M8x1 M12x1,5 L 32 32 40 M max. 105 127 148,5 M min. 91 103 125 Jaw approx. kg 0,335 0,365 0,700 3022

DURO-T XT Key bar chucks with quick-acting jaw change system Equipped with extended and easy to assemble guideways the new lightweight DURO-T XT is convincing with a flexible clamping area for machining large and small workpieces. Weight-reducing by up to 75 % makes maximum utilisation of the machine s potential possible. DURO-T XT Key bar chucks Guideways The new DURO-T XT has an innovative concept for guideways that guarantees flexible and weight-reducing use. In contrast to other large chucks, the DURO-T XT is up to 75 % lighter and that way makes maximum utilisation of the machine s potential possible and clamping of higher workpiece weights. Through the extended and easy to assemble guideways, the clamping area can be set flexibly and hence converted quickly to large and small workpieces. Through the direct mount on the base body, the guideways guarantee extremely high rigidity, stability and protection against penetration by dirt and dust. Principle of operation Thanks to the tangentially arranged threaded spindle, the force is transferred via a key bar having an internal thread. The key bar moves the drive ring via a slide. Two other slides in the drive ring transfer the forces to the other two key bars. The key bars having an inclined profile engage in the base jaws, thereby guaranteeing exact, centric clamping. Proven DURO-T base body with dirt cover Flexible clamping area for quick conversion to large and small workpieces Guideways mounted directly and connected to the chuck for the greatest stability and accuracy Reduced overall height of up to 78 % for better accessibility of the workpieces and minimum interfering contours 3024

M L DURO-T XT Key bar chucks with quick-acting jaw change system PPLITION On turning and milling machines. TYPE Key bar chuck (DURO-T) with removable guideways. USTOMER ENEFITS Weight reduction by up to 75 % Maximum flexibility and faster conversion Innovative design with minimum interference contour and maximum stability TEHNIL FETURES - Weight reduction by up to 75 % allows maximum utilization of the machine potential and the clamping of heavier workpieces - Flexible clamping range thanks to elongated guideways for faster conversion between large and small workpieces - Easy dismounting of the guideways for clamping smaller workpieces - Minimum interference contour and better workpiece accessibility thanks to compact design and a reduced design height by up to 78 % - High stability thanks to direct support of the permanently screwed guideways Key bar chucks DURO-T XT L R1 M 2 α N full base plate max. lightweight base plate 08 DURO-T XT key bar chuck, with complete base plate Item no. Size lamping range external with extended jaws mm lamping range external with standard jaws * mm Interfering contour ** mm Jaw travel mm Weight kg Speed max. Max. Torque Nm Max. total min -1 clamping force kn Weight reduction compared to a standard chuck % 180312 750 (250) 145-715 8-253 804 / 769 8 183 800 190 185 75 180313 1000 (315) 220-995 12-323 1082 / 1014 10,2 365 570 210 190 68 180314 1250 (500) 220-1190 40-501 1305 12,5 640 570 320 290 65 ustomized adaptations of the base plate for further weight reduction on the machine table on request * y disassembling of the stripping cap and use of standard reversible jaws ** y shortening of the base jaws. Please consider shorter clamping ranges Further sizes and mountings available on request on request 3025

Key bar chucks with quick-acting jaw change system Jaws DURO-T XT 28 One-piece jaw E, set, diagonally toothing, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 094002 750 (250) set 114 70 26 094003 1000 (315) set 130 79 32 094043 1250 (500) set 167 93 45 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws only usable in basic chuck. Jaws DURO-T XT 28 Unstepped Jaw L, set, diagonally toothing, unstepped, soft, material 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 249679 750 (250) set 118,7 70 26 249680 1000 (315) set 136,6 79 32 249681 1250 (500) set 173,6 93 45 Jaws only usable in basic chuck. 28 Reversible top jaw U, set, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 094014 750 (250) set 92 50 34,4 094015 1000 (315) set 107 56 35,7 094045 1250 (500) set 130 72 50,4 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws only usable in basic chuck. 28 ase jaw G, set, diagonally toothing, with mounting bolts Item no. huck Size ontents of delivery Jaw length Jaw width 094006 750 (250) set 110 26 094007 1000 (315) set 125 32 094044 1250 (500) set 160 45 Jaws only usable in basic chuck. 21 Draw-down jaws, without clamping inserts, diagonally toothing, 1 piece, without clamping inserts Item no. huck Size Jaw length Jaw height Jaw width 141041 750 (250) 118,7 58,5 26 141043 1000 (315) 136,4 63,9 32 141045 1250 (500) 173,6 73,4 45 Jaws only usable in basic chuck. 21 Draw-down jaws, additional clamping range, for interchangeable clamping inserts, diagonally toothing, 1 piece, without clamping inserts Item no. huck Size Jaw length Jaw height Jaw width 141042 750 (250) 118,7 58,5 26 141044 1000 (315) 136,4 63,9 32 141048 1250 (500) 173,6 73,4 45 Jaws only usable in basic chuck. 3026 on request

Key bar chucks with quick-acting jaw change system Jaws DURO-T XT 15 Interchangeable clamping inserts, 1 piece, with claws Item no. huck Size 141052 750 (250) / 1000 (315) 141055 1250 (500) Jaws only usable in basic chuck. 15 Interchangeable clamping inserts, 1 piece, with serrated toothing Item no. huck Size 141053 750 (250) / 1000 (315) 141056 1250 (500) Jaws only usable in basic chuck. Jaws DURO-T XT 15 Interchangeable clamping inserts, 1 piece, with heat treatable surface Item no. huck Size 141054 750 (250) / 1000 (315) 141057 1250 (500) Jaws only usable in basic chuck. 28 Reversible top jaw U, set, hardened Id.-Nr. huck Size ontents of delivery Jaw length Jaw height Jaw width 180410 750 set 92 50 34,4 180411 1000 set 107 56 35,7 180412 1250 set 130 72 50,4 dditionally or later purchased, hardened jaws must be ground out in the chuck.. For jaws which are applied later, send in the chuck. 28 Unstepped top jaw, set, standard design, soft, material 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 094010 250 set 125 50 30,4 094011 315 set 145 50 34,3 094046 400/500 set 180 73 50,5 21 Reversible claw-type top jaws, standard design, tongue and groove, large clamping range, 1 piece hardened Item no. huck Size Jaw length Jaw height Jaw width 137119 400/500 124 62 50 on request 3027

Key bar chucks with quick-acting jaw change system Jaws DURO-T XT 21 Reversible claw-type top jaws, standard design, tongue and groove, middle sized clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137109 250 72 55 34 137115 315 86 62 34 137121 400/500 100 62 50 21 Reversible claw-type top jaws, standard design, tongue and groove, small clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width Jaws DURO-T XT 137108 250 90 55 34 137114 315 100 62 34 137120 400/500 124 62 50 21 Reversible claw-type top jaws, large design, tongue and groove, small clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137110 250 80 55 50 137116 315 93 62 50 21 Reversible claw-type top jaws, large design, tongue and groove, middle sized clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137112 250 72 55 50 137118 315 86 62 50 21 Reversible claw-type top jaws, large design, tongue and groove, large clamping range, 1 piece, hardened Item no. huck Size Jaw length Jaw height Jaw width 137111 250 90 55 50 137117 315 106 62 50 ccessories DURO-T XT 15 Special grease F80 for lathe chucks for lubrication and conservation of chucking power Item no. Design ontents 308555 artridge 0,5 kg 028975 Tin 1 kg 3028 on request

Technical data DURO-T XT Technical data DURO-T XT huck size 750 1000 1250 Outer diameter huck 1 256 322 507 Outer diameter ase plate 2 320 400 590 Jaw movement 8 10,2 12,5 ore 1) 62 87 162 D 127 152 160 D 1 28 34 35 E H6 100 100 100 F 6 6 6 G 45 45 45 H 11 11 11 K 79,5 98,0 97,5 L 66,5 86 152,5 M SW14 SW17 SW19 N 464 565 724 R 90 100 130 R1 160 180 210 S 370 495 615 Moment of inertia GD2 2) kgm 2 10,52 37,92 98,70 Moment of inertia GD2 2) 3) kgm 2 5,66 18,10 48,93 4,6 o 4,6 o 4,5 o approx. kg kg 183 365 640 approx. kg 3) kg 127 233 436 full base plate 1) With dirt cover 2) The moment of inertia was measured with base jaws but without top jaws 3) With max. lightweight base plate max. lightweight base plate Max. permissible speed The maximum permissible speed has been fixed so that 1/3 of the gripping force is still available as residual gripping force if the maximum grippping is applied and the chuck is fitted with its heaviest jaws. The jaws may not project beyond the outside diameter of the chuck. The chuck must be in perfect condition. The specification DIN 6386 Part 1 shall be observed. huck size 750 1000 1250 Max. speed min-1 800 570 450 Gripping force The gripping force is the sum total of all jaw forces acting radially on the stationary workpiece. The specified gripping forces are standard values. They apply to chucks in a perfect condition which have been lubricated with RÖHM grease F79 and F80. huck size 750 1000 1250 Torque applied on key 1) Nm 70 80 100 Total gripping force 1) kn 66 80 102 Torque applied on key Nm 190 210 320 Max. total gripping force kn 185 240 290 1) Maintaining the accuracy t this torque the clamping jaws have been ground at the factory, for testing the chuck must be clamped with this torque huck capacities of jaw steps huck size 750 1000 1250 External chucking 1 144-618 215-864 215-1140 2 144-638 330-890 199-1159 Jaw position 3 224-719 223-995 340-1200 Internal chucking J1 227-700 298-946 318-1141 J2 307-780 404-1052 459-1282 max. interfering contour 808/**773 1086/**1018 1309 ** y shortening of the base jaws. Please consider shorter clamping ranges. Technical data DURO-T XT 3029

Jaw dimensions DURO-T XT Jaw dimensions DURO-T XT Jaw dimensions DURO-T XT Reversible top jaw U, completely hardened, cross tenon ground, jaw steps not ground Jaws only usable in basic chuck. Unstepped soft top jaw, for turning out special chucking diameters Dimensions for extendend design huck size 750 1000 1250 92 107 130 34,4 35,7 50,4 55 62 79 D 12 12 18 E 3,5 3,5 4,5 F 50 56 72 G 30 35,5 41,4 H 20 26 30 J 10 14 15 K 40 54 60 L 41 40 51 M 40,5 54 71 N 22 26 32 O 36 41 52 P 39 40 57 Q 14 14 18 R 20 20 26 T 1) 57 63,6 80,6 Jaw approx. kg 0,800 1,135 2,535 1) Dimension marked on base jaw huck size 750 1000 1250 125 125 145 145 180 30,4 50,5 34,3 50,5 50,5 55 80 56 80 80 D 12 12 12 12 18 E 3,5 3,5 3,5 3,5 4,5 F 50 75 50 74 73 G 70 70 74 74 100 H 20 20 26 26 30 J 10 10 14 14 15 K 40 40 54 54 60 P 39 54 34 48 58 Q 14 14 14 14 18 R 20 20 20 20 26 S M12x1,5 M12x1,5 M12x1,5 M12x1,5 M16x1,5 T 1) 57 72 57,6 71,6 81,6 U 27 42 22 36 42 Jaw approx. kg 1,500 3,700 2,265 4,800 4,500 1) Dimension marked on base jaw Reversible one-piece jaw E, hardened and ground, jaw steps not ground Jaws only usable in basic chuck. lockbacken L, ungestuft, ungehärtet, Verzahnung und Führung gehärtet und geschliffen. Jaws only usable in basic chuck. huck size 750 1000 1250 114 130 167 26 32 45 70 79 93 D 41,5 40,2 50,5 E 40,3 54 71 F - - - G 56 64 73 H - - - J 42 49 53 K 13 13 20 L 19,5 19,5 30 Jaw approx. kg 1,135 1,835 3,665 huck size 750 1000 1250 118,7 136,6 173,6 26 32 45 70 79 93 Jaw approx. kg 1,535 2,400 5 ase jaws G, hardened and ground Jaws only usable in basic chuck. 3030 huck size 750 1000 1250 110 125 160 26 32 45 26 30 35 D 20 26 30 E 5,5 6,5 7,5 F 12 12 18 G 3 3 4 H 7 7,6 8,6 J 10 14 15 K M12x1,5 M12x1,5 M16x1,5 L 40 54 60 M 163 196 250 294 Jaw approx. kg 0,700 1,065 2,350

PROVEN HUK WITH SPIRL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping range by means of the spiral ring. Using the radially arranged drive, the force is transferred to the hardened spiral ring via a bevel gearing and further conducted to the clamping jaws via the spiral. 3032

GERED SROLL HUKS The RÖHM geared scroll chucks have proven themselves a thousand times over and have already been used successfully on lathes, rotary tables and dividing attachments for decades. The jaws can be adjusted over the entire clamping range in order to be able to very quickly clamp workpieces with a wide clamping diameter range without offsetting the jaws. DVNTGE T GLNE Geared scroll chucks Quick jaw adjustment over the entire clamping range Proven chuck with optimal price/performance ratio Protection of the machine spindle by means of splash-water edge Spiral ring for precise force transfer and quick jaw adjustment over the entire clamping range Radially arranged drive for defined torque introduction using a torque wrench Protection of the machine spindle from cooling lubricant by means of splash-water edge ontrol edge for quick and easy adjustment on the machine 3033

ZS - ZSU Geared scroll chucks in steel design PPLITION Proven rotary chuck for use in areas requiring high clamping forces, high concentricity as well as reliable long-term repeatability. For universal use on lathes, rotary tables, dividing units, etc. TYPE Geared scroll chucks in steel design. Geared scroll chucks ZS-ZSU USTOMER ENEFITS High clamping force Special flat design with direct mounting The jaws can be adjusted over the entire clamping range by turning the key. This allows workpieces with different clamping diameters to be quickly clamped Jaws in chuck ground out for concentricity TEHNIL FETURES - With one-piece jaws or with base and top jaws - Steel body and spiral ring die-forged - Series-balanced and hardened 09 DIN 6350, cylindrical centre mount, form Size ylindrical centre mount Throughhole mm 3 jaw chuck with inside and outside jaw 4 jaw chuck with inside and outside jaw 3 jaw chuck with base and reversible top jaw 4 jaw chuck with base and reversible top jaw Speed max. Torque Nm Total min -1 clamping force kn 80 56 19 102513 102505 - - 7000 30 13 100 70 20 101782 102130 101788 102136 6300 60 27 125 95 32 101672 106075 101678 106081 5500 80 31 160 125 42 100717 101164 100725 101170 4600 110 47 200 160 55 100186 100466 100189 100484 4000 140 55 250 200 76 100533 101030 100541 101036 3000 150 63 315 260 103 101344 101598 101350 101901 2300 180 69 400 330 136 102062 102330 102068 102336 1800 240 92 500 420 190 102555 103340 102585 103346 1300 260 100 630 545 240 102720 102856 102726 102862 850 280 105 800 710 380 104913 104917 - - 700 300 110 1000 910 460 104925 104929 - - 560 450 115 1250 910 550 104941 104945 - - 450 450 115 Further sizes and mountings available on request 09 Mounting from front, DIN 6350, cylindrical centre mount Size ylindrical centre mount Through-hole mm 3 jaw chuck with inside and outside jaw 4 jaw chuck with inside and outside jaw Speed max. min -1 Torque Nm Total clamping force kn 125 95 32 120155 124447 5500 80 31 160 125 42 115568 125802 4600 110 47 200 160 55 113158 113160 4000 140 55 250 200 76 114304 114306 3000 150 63 315 260 103 120270 129946 2300 180 69 400 330 136 123475 134401 1800 240 92 500 420 190 127616 123465 1300 260 100 630 545 240 128545 135061 850 280 105 Further sizes and mountings available on request 3034 on request

ZS - ZSU Geared scroll chucks in steel design 09 ISO 702-3 (DIN 55027), with studs and locknuts, optional DIN 55021 with set screw and nut Size Mount short taper Throughhole mm 3 jaw chuck with inside and outside jaw 4 jaw chuck with inside and outside jaw 3 jaw chuck with base and reversible top jaw 4 jaw chuck with base and reversible top jaw Speed max. min -1 Torque Nm Total clamping force kn 125 4 32 101692 107015 101695 107021 5500 80 31 160 4 42 100740 101184 100743 101187 4600 110 47 160 5 42 100744 101188 100747 101191 4600 110 47 200 5 55 100152 100472 100155 101420 4000 140 55 200 6 55 100156 101422 100159 101428 4000 140 55 250 6 76 100555 101050 100564 101059 3000 150 63 250 8 76 100556 101051 100565 101060 3000 150 63 315 6 103 101364 101919 101373 101922 2300 180 69 315 8 103 101365 101923 101374 101926 2300 180 69 315 11 103 101366 101927 101375 101930 2300 180 69 400 8 136 102202 101876 102208 101882 1800 240 92 400 11 136 102210 101884 102216 101890 1800 240 92 500 11 190 102548 102971 102554 102977 1300 260 100 500 15 190 102915 103227 102921 103233 1300 260 100 630 11 192,7 102752 102888 102758 102894 850 280 105 630 15 240 102760 103084 102766 103090 850 280 105 Further sizes and mountings available on request Geared scroll chucks ZS-ZSU 09 ISO 702-2 (DIN 55029); S 5.9, type D, with studs for amlock Size Mount short taper Throughhole mm 3 jaw chuck with inside and outside jaw 4 jaw chuck with inside and outside jaw 3 jaw chuck with base and reversible top jaw 4 jaw chuck with base and reversible top jaw Speed max. min -1 Torque Nm Total clamping force kn 125 4 32 108895 109208 105870 105872 5500 80 31 160 4 42 108897 109210 105882 105886 4600 110 47 160 5 42 109150 109213 105898 106302 4600 110 47 200 5 55 109151 109214 106330 106334 4000 140 55 200 6 55 109154 109217 106346 106350 4000 140 55 250 6 76 109155 109218 106386 106390 3000 150 63 250 8 76 109159 109222 106402 106406 3000 150 63 315 6 103 109156 109219 106442 106446 2300 180 69 315 8 103 109160 109223 106458 106462 2300 180 69 315 11 103 109165 109228 106474 106478 2300 180 69 400 8 136 109161 109224 106498 106602 1800 240 92 400 11 136 109166 109229 106614 106618 1800 240 92 500 11 190 109167 109230 103274 106646 1300 260 100 500 15 190 109170 109233 103275 103271 1300 260 100 630 11 192,7 109168 109231 106658 106662 850 280 105 630 15 240 109171 109234 103328 106251 850 280 105 Further sizes and mountings available on request on request 3035

Jaws ZS - ZSU Geared scroll chucks in steel design 09 Inside jaw DIN 6350, outward stepped jaw, hardened huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 80 110155 110063 37 26 12 100 110156 110064 48 33,5 14 125 110157 110065 52 41,5 18 160 110159 110067 61 47,5 18 200 110160 110068 69 53,5 20 250 110161 110069 90 67,5 24 315 110162 110070 130 79,5 34 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws ZS-ZSU 09 Outside jaw D DIN 6350, inward stepped jaw, hardened huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 80 110165 110073 37 26 12 100 110166 110074 48 33,5 14 125 110167 110075 52 41,5 18 160 110169 110077 61 47,5 18 200 110170 110078 69 53,5 20 250 110171 110079 90 67,5 24 315 110016 110080 130 79,5 34 400 110017 110081 130 79,5 34 500/630 110018 110082 190 95 42 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 09 Unstepped jaw L DIN 6350, unstepped, soft, 16Mnr5 huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 80 107588 107598 37 26 12 100 107589 107599 48 33,5 14 125 107590 107600 52 41,5 18 160 107592 107602 61 47,5 18 200 107593 107603 69 53,5 20 250 107594 107604 90 67,5 24 315 107595 107605 130 79,5 34 400 107596 107644 130 79,5 34 500/630 107597 107645 190 95 42 09 ase jaw G DIN 6350 with fixing screw huck Size 3-jaw set 4-jaw set Jaw length Jaw width 100 107500 107542 46 14 125 107501 107543 55 18 160 107503 107545 65 18 200 107504 107546 78 20 250 107505 107547 92 24 315 107506 107548 108 34 400 107507 107549 127 34 500 107508 107550 165 42 630 107509 107551 203 42 800 105272 141616 291 55 1000 105274 141611 329 55 1250 105275 141614 367 55 onfigure your individual clamping jaws online! www.web2product.biz 3036 on request

Jaws ZS - ZSU 09 Reversible top jaws U DIN 6350, hardened Geared scroll chucks in steel design huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 09 Unstepped top jaw DIN 6350, soft, material 16Mnr5 100 108045 108053 47 29,5 22 125 108046 108054 56 37,5 26 160 107936 107938 66,7 41,5 28 200 107937 107939 79,5 42,5 30 250 108049 108057 95,3 52,5 36 315 108050 108058 109,5 57,5 42 400 108051 108059 127 64,5 42 500/630 108052 108060 127 79,5 50 800 105081 105085 210 89 68 1000/1250 105098 105101 210 110 68 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width Jaws ZS-ZSU 100 107633 107641 53 30 22,5 125 107634 107642 62 38 26,5 160 108581 108583 74 42 28,5 200 108582 108584 87 43 30,5 250 107637 107579 103 53 36,5 315 107638 107580 120 58 42,5 400 107639 107581 137 65 42,5 500/630 107640 107582 140 80 50,5 800 105103 105105 210 89 68 1000/1250 105107 105109 210 110 68 09 Unstepped jaw L, special length, soft, 16Mnr5 DIN 6350 huck Size 3-jaw set 4-jaw set 1 X1 max. mm J mm X max. mm 200 130031 137073 100 50 69 32,5 19 250 132658 137074 120 56 90 41 26 315 132184 129894 160 70 130 46 40 400 137075 130442 160 70 130 42 40 500/630 131540 137076 220 80 190 55 50 200 130033 137077 120 70 69 32,5 19 250 128880 130610 140 76 90 41 26 315 118908 137078 200 110 130 46 40 400 137079 137080 200 110 130 42 40 500/630 137081 137082 280 140 190 55 50 315 121367 133691 250 160 130 46 40 400 137087 137088 250 160 130 42 40 09 Unstepped jaw L, special height, soft, 16Mnr5 DIN 6350 huck Size 3-jaw set 4-jaw set 1 mm J1 mm J mm 200 125710 132972 80 58,5 54 32,5 250 122188 134796 100 73 68 41 315 132186 137091 110 76 80 46 400 137092 131655 110 72 80 42 500/630 137093 137094 150 110 95 55 200 125712 137095 120 98,5 54 32,5 250 122189 130630 130 103 68 41 315 137096 137097 140 106 80 46 400 137098 137099 140 102 80 42 500/630 125117 137100 200 160 95 55 200 125714 137101 150 128,5 54 32,5 250 137102 137103 150 123 68 41 315 137104 130340 160 126 80 46 400 132879 110109 160 122 80 42 on request 3037

Jaws ZS - ZSU 09 Top jaw, special length, soft, 16Mnr5 DIN 6350 Geared scroll chucks in steel design huck Size 3-jaw set 4-jaw set 1 X1 max. F mm mm X max. mm Jaws ZS-ZSU 09 Top jaw, special height, soft, 16Mnr5 DIN 6350 200 110086 148139 100 43 6,8 87 30 250 112122 129289 130 63 8 103 36 315 110624 143764 160 76 5,5 120 36 400 110626 141277 160 53 8,5 137 30 500/630 103014 103393 170 75 8,5 140 45 200 112120 148657 120 63 6,8 87 30 250 125428 128700 150 83 8 103 36 315 112091 147754 200 116 5,5 120 36 400 112118 141263 200 93 8,5 137 30 500/630 110632 148234 220 125 8,5 140 45 250 104710 146013 180 113 8 103 36 315 112089 147860 250 166 5,5 120 36 400 103654 149974 260 153 8,5 137 30 500/630 112127 148235 280 185 8,5 140 45 huck Size 3-jaw set 4-jaw set 1 mm mm F mm 200 132155 132181 60 43 6,8 250 119645 135867 70 53 8 315 110435 149975 80 58 5,5 400 126385 118373 90 65 8,5 500/630 128590 149985 100 80 8,5 200 128564 149976 80 43 6,8 250 128571 134999 100 53 8 315 110437 129691 110 58 5,5 400 110628 135426 120 65 8,5 500/630 110630 149977 130 80 8,5 250 128573 149978 150 53 8 315 128569 141671 150 58 5,5 400 128567 139591 160 65 8,5 500/630 128588 140427 160 80 8,5 09 Top jaw, special width and height, soft, 16Mnr5 DIN 6350 huck Size 3-jaw set 4-jaw set 1 mm 1 mm mm mm 200 105057 105061 40 70 30.5 43 250 137090 141338 50 80 36.5 53 315 143053 149979 60 90 42 58 400 131567 149980 60 90 42.5 65 500/630 137084 149981 80 110 50.5 80 200 133259 149982 50 80 30.5 43 250 133653 137526 60 90 36.5 53 315 143057 149983 80 110 42 58 400 137086 149984 80 110 42.5 65 onfigure your individual clamping jaws online! www.web2product.biz 3038 on request

Jaws ZS - ZSU 15 Mounting bolt for top jaws, bolt 1 Geared scroll chucks in steel design Item no. Size Thread ontents of delivery 249299 100 M6x20 piece 236949 125 M8x25 piece 334571 160/200 M8x30 piece 233025 250 M12x40 piece 233026 315 M12x45 piece 220565 400 M16x50 piece 249003 500/630 M20x80 piece 15 Mounting bolt for top jaws, bolt 2 Item no. Size Thread ontents of delivery 216528 100 M6x16 piece 233058 125/160/200 M8x20 piece 227692 250 M12x25 piece 233030 315 M12x30 piece 220564 400 M16x35 piece 233047 500/630 M20x40 piece Jaws ZS-ZSU ccessories ZS - ZSU 09 ase plates for lathe chucks with cylindrical centre mount DIN 6350 09 Unfinished adapter plates for cylindrical mount The unfinished back plate must be machined and fitted on both machine and chuck side Item no. Size Item no. huck Size Inch mm mm mm D mm E mm 162793 160 162401 200 163036 250 133705 315 017123 74 3 80 56 45 15-017113 80 3 ¼ 92 56 47 15 20 017114 100 4 120 80 58 20 25 017115 125 5 135 80 58 20 25 017125 140 5 ½ 150 80 58 20 25 017116 160 6 ¼ 170 80 58 20 30 017117 200 8 210 92 66 22 40 017118 250 10 260 105 92 25 50 017119 315 12 ½ 330 165 100 30 50 017124 350 14 365 180 120 30 60 09 hip guard, piece 09 Special grease F80 for lathe chucks for lubrication and conservation of chucking power Item no. Size ontents of delivery Item no. Design ontents 108500 80/85 piece 108501 100/110 piece 108502 125 piece 108503 140/160 piece 108504 200 piece 108505 250 piece 108506 315/350/400 piece 108508 500/630 piece 308555 artridge 0,5 kg 028975 Tin 1 kg on request 3039

Geared scroll chucks in steel design ccessories ZS - ZSU 09 Scroll 09 Driving pinion Item no. Size Item no. Size Square ccessories ZS-ZSU 102521 74 102183 80/85 101754 100 112660 110 101721 125 105827 140 100303 160 100003 200 100203 250 101552 315 105228 350 102497 400 162973 500 162964 630 102522 74 6 102184 80 6 113198 85 6 101755 100 8 112662 110 8 101722 125 9 105828 140 9 100304 160 10 100005 200 11 100204 250 12 112267 270 12 101553 315 14 105229 350 14 102498 400 17 162974 500 19 162965 630 19 09 Pinion holder screw 09 Standard key Item no. Size Item no. Size Square Hexagon Length mm 102523 74 102185 85 100305 160 100006 270 101554 315 102499 400 103300 630 006325 74-6 55 107426 80/85 6-62 107427 100/110 8-75 107428 125/140 9-80 107429 160 10-90 107430 200/230 11-100 107431 250/270 12-100 107432 315 14-110 107433 350 14-140 107434 400 17-140 107435 500/630 19-150 09 Safety key with ejector 09 Elongated safety key with ejector Item no. Size Square Length mm Item no. Size Square Length mm 154370 80/85 6 110 154371 100/110 8 130 154372 125/140 9 130 154373 160 10 160 154374 200/230 11 160 154375 250/270 12 160 154376 315 14 200 154377 350 14 200 154378 400 17 250 154379 500/630 19 250 154683 125/140 9 170 154685 160 10 180 154687 200/230 11 200 154689 250/270 12 200 154695 315 14 250 09 Safety adapter with ejector for actuating the chuck with torque (defined torque introduction) 09 Mounting screws with cylindrical centre rim Item no. Size Square Inch Item no. Size Thread ontents of delivery 178566 80/85 6 3/8 178567 100/110 8 1/2 178568 125/140 9 1/2 178569 160 10 1/2 178570 200/230 11 1/2 178571 250/270 12 1/2 178572 315/350 14 1/2 178573 400 17 1/2 178574 500/630/700/800 19 3/4 178575 1000/1250 24 3/4 249299 74-85 M6x20 piece 334571 100-140 M8x30 piece 249301 160-230 M10x35 piece 233025 250-270 M12x40 piece 220565 315-350 M16x50 piece 229183 400-630 M16x60 piece 3040 on request

Geared scroll chucks in steel design ccessories ZS - ZSU 15 Mounting screws for lathe chucks with direct short-taper, for front mounting 15 Set screw with nut DIN 55021 Item no. Size Thread ontents of delivery huck Size Taper size 302195 74 M10x55 piece 160 5 200184 80 M10x65 piece 200 5 233006 85 M12x65 piece 200 6 233075 100 M10x90 piece 250 5 216549 110 M12x70 piece 250 6 302194 125 M16x70 piece 250 8 242954 140 M12x100 piece 315 6 358816 160 M16x85 piece 315 8 243665 200/230 M12x130 piece 350 6 236516 315 M16x110 piece 400 8 615744 350 M20x95 piece 400 11 010210 400 M20x130 piece 500 11 328925 500 M20x145 piece 630 11 367648 630 M24x125 piece 630 15 Item no. Thread For taper Quantity 107453 M10x30 4 3 107455 M10x35 5 4 107456 M12x40 6 4 107457 M16x45 8 4 107458 M20x55 11 6 127618 M24x65 15 6 ccessories ZS-ZSU 09 Stud for amlock ISO 702-2 (DIN 55029) and cylindrical studs 09 Stud and locknut ISO 702-3 (DIN 55027) Item no. Thread For taper Quantity Item no. Thread ontents of delivery For taper Quantity 178364 M10x1 3 3 178365 M10x1 4 3 178366 M12x1 5 6 178367 M16x1,5 6 6 178368 M20x1,5 8 6 178369 M22x1,5 11 6 178370 M24x1,5 15 6 178371 M27x2 20 6 107447 M10x34 piece 3 3 107448 M10x39 piece 4 3 107449 M10x43 piece 5 4 107450 M12x50 piece 6 4 107451 M16x60 piece 8 4 107452 M20x75 piece 11 6 125650 M24x90 piece 15 6 130636 M24x100 piece 20 6 09 Stud for amlock S 5.9 (DIN 55029) and cylindrical studs Item no. Thread For taper Quantity 107465 7/16-20x35 3 3 107466 7/16-20x37 4 3 107467 ½-20x43 5 6 107468 5/8-18x49 6 6 107469 ¾-16x55,5 8 6 107470 7/8-14x67 11 6 127621 1-14x76 15 6 130637 1½-12x89 20 6 on request 3041

Orange Line Geared scroll chucks in cast iron design ORNGE LINE PPLITION Proven rotary chuck for use in areas requiring high clamping forces, high concentricity as well as reliable long-term repeatability. ross tenon to ISO 3442 and S 5.8. TYPE Geared scroll chucks in cast iron design. Special flat design with direct mounting. Geared scroll chucks - Orange Line USTOMER ENEFITS Good price/performance ratio Special flat design with direct mounting The jaws can be adjusted over the entire clamping range by turning the key. This allows workpieces with different clamping diameters to be quickly clamped Jaws in chuck ground out for concentricity TEHNIL FETURES - With one set each of one-piece outward- and inward stepped jaws - Vibration-damping body made of special cast iron - Spiral ring die-forged as well as balanced and hardened 09 DIN 6350, cylindrical centre mount, form Size ylindrical centre mount Through-hole mm 3 jaw chuck with inside and outside jaw 4 jaw chuck with inside and outside jaw Speed max. min -1 Torque Nm Total clamping force kn 100 70 20 101781 102129 4500 60 27 125 95 32 101628 106074 4000 80 31 160 125 42 100300 100325 3600 110 47 200 160 55 100000 100465 3000 140 55 250 200 76 100200 100834 2500 150 63 315 260 103 101248 101567 2000 180 69 3042 on request

Geared scroll chucks in cast iron design Jaws Orange Line 09 Inside jaw DIN 6350, outward stepped jaw, hardened huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 100 110156 110064 48 33,5 14 125 110157 110065 52 41,5 18 160 110159 110067 61 47,5 18 200 110160 110068 69 53,5 20 250 110161 110069 90 67,5 24 315 110162 110070 130 79,5 34 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 09 Outside jaw D DIN 6350, inward stepped jaw, hardened huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 100 110166 110074 48 33,5 14 125 110167 110075 52 41,5 18 160 110169 110077 61 47,5 18 200 110170 110078 69 53,5 20 250 110171 110079 90 67,5 24 315 110016 110080 130 79,5 34 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws Orange Line 09 Unstepped jaw L DIN 6350, unstepped, soft, 16Mnr5 huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 100 107589 107599 48 33,5 14 125 107590 107600 52 41,5 18 160 107592 107602 61 47,5 18 200 107593 107603 69 53,5 20 250 107594 107604 90 67,5 24 315 107595 107605 130 79,5 34 09 ase jaw G DIN 6350, with fixing screw huck Size 3-jaw set 4-jaw set Jaw length Jaw width 100 107500 107542 46 14 125 107501 107543 55 18 160 107503 107545 65 18 200 107504 107546 78 20 250 107505 107547 92 24 315 107506 107548 108 34 09 Reversible top jaws U DIN 6350, hardened huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 100 108045 108053 47 29,5 22 125 108046 108054 56 37,5 26 160 107936 107938 66,7 41,5 28 200 107937 107939 79,5 42,5 30 250 108049 108057 95,3 52,5 36 315 108050 108058 109,5 57,5 42 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. onfigure your individual clamping jaws online! www.web2product.biz on request 3043

Geared scroll chucks in cast iron design Jaws Orange Line 09 Unstepped top jaw DIN 6350, soft, material 16Mnr5 huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 100 107633 107641 53 30 22,5 125 107634 107642 62 38 26,5 160 108581 108583 74 42 28,5 200 108582 108584 87 43 30,5 250 107637 107579 103 53 36,5 315 107638 107580 120 58 42,5 09 Unstepped jaw L, special length, soft, 16Mnr5, DIN 6350 Jaws Orange Line huck Size 3-jaw set 4-jaw set 1 X1 max. mm J mm X max. mm 200 130031 137073 100 50 69 32,5 19 250 132658 137074 120 56 90 41 26 315 132184 129894 160 70 130 46 40 200 130033 137077 120 70 69 32,5 19 250 128880 130610 140 76 90 41 26 315 118908 137078 200 110 130 46 40 315 121367 133691 250 160 130 46 40 09 Unstepped jaw L, special height, soft, 16Mnr5, DIN 6350 huck Size 3-jaw set 4-jaw set 1 mm J1 mm J mm 200 125710 132972 80 58,5 54 32,5 250 122188 134796 100 73 68 41 315 132186 137091 110 76 80 46 200 125712 137095 120 98,5 54 32,5 250 122189 130630 130 103 68 41 315 137096 137097 140 106 80 46 200 125714 137101 150 128,5 54 32,5 250 137102 137103 150 123 68 41 315 137104 130340 160 126 80 46 09 Top jaw, special length, soft, 16Mnr5, DIN 6350 huck Size 3-jaw set 4-jaw set 1 X1 max. F mm mm X max. mm 200 110086 148139 100 43 6,8 87 30 250 112122 129289 130 63 8 103 36 315 110624 143764 160 76 5,5 120 36 200 112120 148657 120 63 6,8 87 30 250 125428 128700 150 83 8 103 36 315 112091 147754 200 116 5,5 120 36 250 104710 146013 180 113 8 103 36 315 112089 147860 250 166 5,5 120 36 3044 on request

Geared scroll chucks in cast iron design Jaws Orange Line 09 Top jaw, special height, soft, 16Mnr5 DIN 6350 huck Size 3-jaw set 4-jaw set 1 mm mm F mm 200 132155 132181 60 43 6,8 250 119645 135867 70 53 8 315 110435 149975 80 58 5,5 200 128564 149976 80 43 6,8 250 128571 134999 100 53 8 315 110437 129691 110 58 5,5 250 128573 149978 150 53 8 315 128569 141671 150 58 5,5 Jaws Orange Line 09 Top jaw, special width and height, soft, 16Mnr5 DIN 6350 huck Size 3-jaw set 4-jaw set 1 mm 1 mm mm mm 200 105057 105061 40 70 30.5 43 250 137090 141338 50 80 36.5 53 315 143053 149979 60 90 42 58 200 133259 149982 50 80 30.5 43 250 133653 137526 60 90 36.5 53 315 143057 149983 80 110 42 58 15 Mounting bolt for top jaws, bolt 1 Item no. Size Thread ontents of delivery 249299 100 M6x20 piece 236949 125 M8x25 piece 334571 160 M8x30 piece 233025 250 M12x40 piece 233026 315 M12x45 piece 15 Mounting bolt for top jaws, bolt 2 Item no. Size Thread ontents of delivery 216528 100 M6x16 piece 233058 125/160/200 M8x20 piece 227692 250 M12x25 piece 233030 315 M12x30 piece onfigure your individual clamping jaws online! www.web2product.biz on request 3045

Geared scroll chucks in cast iron design ccessories Orange Line 09 ase plates for lathe chucks with cylindrical centre mount DIN 6350 09 Unfinished adapter plates for cylindrical mount The unfinished back plate must be machined and fitted on both machine and chuck side Item no. Size Item no. huck Size Inch mm mm mm D mm E mm 162793 160 162401 200 163036 250 133705 315 017114 100 4 120 80 58 20 25 017115 125 5 135 80 58 20 25 017116 160 6 ¼ 170 80 58 20 30 017117 200 8 210 92 66 22 40 017118 250 10 260 105 92 25 50 ccessories Orange Line 09 hip guard, piece 09 Special grease F80 for lathe chucks for lubrication and conservation of chucking power Item no. Size ontents of delivery Item no. Design ontents 108501 100/110 piece 108502 125 piece 108503 140/160 piece 108504 200 piece 108505 250 piece 108506 315/350/400 piece 308555 artridge 0,5 kg 028975 Tin 1 kg 09 Scroll 09 Driving pinion Item no. Size Item no. Size Square 101754 100 112660 110 101721 125 105827 140 100303 160 100003 200 100203 250 101552 315 101755 100 8 112662 110 8 101722 125 9 105828 140 9 100304 160 10 100005 200 11 100204 250 12 112267 270 12 101553 315 14 09 Pinion holder screw 09 Standard key Item no. Size Item no. Size Square Length mm 100305 160 100006 270 101554 315 107427 100/110 8 75 107428 125/140 9 80 107429 160 10 90 107430 200/230 11 100 107431 250/270 12 100 107432 315 14 110 09 Safety key with ejector 09 Elongated safety key with ejector Item no. Size Square Length mm Item no. Size Square Length mm 154371 100/110 8 130 154372 125/140 9 130 154373 160 10 160 154374 200/230 11 160 154375 250/270 12 160 154376 315 14 200 154683 125/140 9 170 154685 160 10 180 154687 200/230 11 200 154689 250/270 12 200 154695 315 14 250 3046 on request

Geared scroll chucks in cast iron design ccessories Orange Line 09 Safety adapter with ejector for actuating the chuck with torque (defined torque introduction) 09 Mounting screws with cylindrical centre rim Item no. Size Square Inch Item no. Size Thread ontents of delivery 178567 100/110 8 1/2 178568 125/140 9 1/2 178569 160 10 1/2 178570 200/230 11 1/2 178571 250/270 12 1/2 178572 315/350 14 1/2 334571 100-140 M8x30 piece 249301 160-230 M10x35 piece 233025 250-270 M12x40 piece 220565 315-350 M16x50 piece 15 Mounting screws for lathe chucks with direct short-taper, for front mounting Item no. Size Thread ontents of delivery huck Size 233075 100 M10x90 piece 250 5 216549 110 M12x70 piece 250 6 302194 125 M16x70 piece 250 8 242954 140 M12x100 piece 315 6 358816 160 M16x85 piece 315 8 243665 200/230 M12x130 piece 350 6 236516 315 M16x110 piece 400 8 Taper size 15 Set screw with nut DIN 55021 Item no. Thread For taper Quantity 107453 M10x30 4 3 107455 M10x35 5 4 107456 M12x40 6 4 107457 M16x45 8 4 107458 M20x55 11 6 127618 M24x65 15 6 ccessories Orange Line 09 Stud for amlock ISO 702-2 (DIN 55029) and cylindrical studs 09 Stud and locknut ISO 702-3 (DIN 55027) Item no. Thread For taper Quantity Item no. Thread ontents of delivery For taper Quantity 178364 M10x1 3 3 178365 M10x1 4 3 178366 M12x1 5 6 178367 M16x1,5 6 6 178368 M20x1,5 8 6 178369 M22x1,5 11 6 178370 M24x1,5 15 6 178371 M27x2 20 6 107447 M10x34 piece 3 3 107448 M10x39 piece 4 3 107449 M10x43 piece 5 4 107450 M12x50 piece 6 4 107451 M16x60 piece 8 4 107452 M20x75 piece 11 6 125650 M24x90 piece 15 6 130636 M24x100 piece 20 6 09 Stud for amlock S 5.9 (DIN 55029) and cylindrical studs Item no. Thread For taper Quantity 107465 7/16-20x35 3 3 107466 7/16-20x37 4 3 107467 ½-20x43 5 6 107468 5/8-18x49 6 6 107469 ¾-16x55,5 8 6 107470 7/8-14x67 11 6 127621 1-14x76 15 6 130637 1½-12x89 20 6 on request 3047

ZS Hi-Tru Lathe and grinding chucks PPLITION Optimized for machining workpieces which must be produced with maximum concentricity. an be universally used, but is especially advantageous on turning and grinding machines as well as dividing units. TYPE Face spiral chuck in steel design, with which the workpiece can be adjusted very sensitively to the desired concentricity via 3 tangentially arranged adjusting spindles. Lathe and grinding chucks ZS Hi-Tru USTOMER ENEFITS Radial fine adjustment for maximum concentricity Repeatability 0.015 mm djusting accuracy within 0.005 mm Precision adjustment without opening the mounting screws Jaws in chuck ground out for concentricity TEHNIL FETURES - With one set each of turning and drilling jaws - Hardened adjusting spindles, as well as their support surfaces - Hardened spiral ring - Steel take-up flange 09 ZS Hi-Tru, with one set outward stepped jaws and one set inward stepped jaws DIN 6350, cylindrical centre mount, Form Item no. Size ylindrical centre mount Through-hole mm Speed max. min -1 Torque Nm Total clamping force kn 180259 80 56 19 7000 30 13 180261 100 70 20 6300 60 27 180263 125 95 32 5500 80 31 180265 160 125 42 4600 110 47 180267 200 160 55 4000 140 55 180269 250 200 76 3000 150 63 180271 315 260 103 2300 180 69 On request from size 125 with 6 jaws or with short-taper mount to ISO 702-3 (DIN 55027) or ISO 702-2 (DIN 55029) amlock Further sizes and mountings available on request DIN 6350 Dimensions ZS Hi-Tru ylindrical centre mount, Form hexagon spindle center mismatch clamping center Size Zoll +0,02 D F G Hexagon Weight ZS Hi-Tru, with one set outward stepped jaws and one set inward stepped jaws 80 3 1/4 56 3 50,5 67 3xM6 4 1,7 100 4 70 3 63 83 3xM8 5 3,6 125 5 95 4 72 108 3xM8 5 5,6 160 6 1/4 125 4 81 140 3xM10 6 10 200 8 160 4 89,5 176 3xM10 6 17,2 250 10 200 5 102 224 3xM12 8 34,5 315 12 1/2 260 5 122 286 3xM16 8 57,5 3048 on request

Lathe and grinding chucks Jaws ZS Hi-Tru 09 Inside jaw DIN 6350, outward stepped jaw, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 110155 80 set 37 26 12 110156 100 set 48 33,5 14 110157 125 set 52 41,5 18 110159 160 set 61 47,5 18 110160 200 set 69 53,5 20 110161 250 set 90 67,5 24 110162 315 set 130 79,5 34 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 09 Outside jaw D DIN 6350, inward stepped jaw, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 110165 80 set 37 26 12 110166 100 set 48 33,5 14 110167 125 set 52 41,5 18 110169 160 set 61 47,5 18 110170 200 set 69 53,5 20 110171 250 set 90 67,5 24 110016 315 set 130 79,5 34 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. Jaws ZS Hi-Tru 09 Unstepped jaw L DIN 6350, unstepped, soft, 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 107588 80 set 37 26 12 107589 100 set 48 33,5 14 107590 125 set 52 41,5 18 107592 160 set 61 47,5 18 107593 200 set 69 53,5 20 107594 250 set 90 67,5 24 107595 315 set 130 79,5 34 09 ase jaw G DIN 6350, with fixing screw Item no. huck Size ontents of delivery Jaw length Jaw width 107500 100 set 46 14 107501 125 set 55 18 107503 160 set 65 18 107504 200 set 78 20 107505 250 set 92 24 107506 315 set 108 34 09 Reversible top jaws U DIN 6350, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 108045 100 set 47 29,5 22 108046 125 set 56 37,5 26 107936 160 set 66,7 41,5 28 107937 200 set 79,5 42,5 30 108049 250 set 95,3 52,5 36 108050 315 set 109,5 57,5 42 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. onfigure your individual clamping jaws online! www.web2product.biz on request 3049

Lathe and grinding chucks Jaws ZS Hi-Tru 09 Unstepped top jaw DIN 6350, soft, material 16Mnr5 Item no. huck size ontents of delivery Jaw length Jaw height Jaw width 107633 100 Satz 53 30 22,5 107634 125 Satz 62 38 26,5 108581 160 Satz 74 42 28,5 108582 200 Satz 87 43 30,5 107637 250 Satz 103 53 36,5 107638 315 Satz 120 58 42,5 09 Unstepped jaw L, special length, soft, 16Mnr5, DIN 6350 Item no. huck size 1 mm X1 max. mm J X max. Jaws ZS Hi-Tru 130031 200 100 50 69 32,5 19 132658 250 120 56 90 41 26 132184 315 160 70 130 46 40 130033 200 120 70 69 32,5 19 128880 250 140 76 90 41 26 118908 315 200 110 130 46 40 121367 315 250 160 130 46 40 09 Unstepped jaw L, special height, soft, 16Mnr5, DIN 6350 Item no. huck size 1 J1 mm J 125710 200 80 58,5 54 32,5 122188 250 100 73 68 41 132186 315 110 76 80 46 125712 200 120 98,5 54 32,5 122189 250 130 103 68 41 137096 315 140 106 80 46 125714 200 150 128,5 54 32,5 137102 250 150 123 68 41 137104 315 160 126 80 46 09 Top jaw, special length, soft, 16Mnr5, DIN 6350 Item no. huck size 1 mm X1 max. mm F X max. 110086 200 100 43 6,8 87 30 112122 250 130 63 8 103 36 110624 315 160 76 5,5 120 36 112120 200 120 63 6,8 87 30 125428 250 150 83 8 103 36 112091 315 200 116 5,5 120 36 104710 250 180 113 8 103 36 112089 315 250 166 5,5 120 36 3050 on request

Lathe and grinding chucks Jaws ZS Hi-Tru 09 Top jaw, special height, soft, 16Mnr5, DIN 6350 Item no. huck size 1 F 132155 200 60 43 6,8 119645 250 70 53 8 110435 315 80 58 5,5 128564 200 80 43 6,8 128571 250 100 53 8 110437 315 110 58 5,5 128573 250 150 53 8 128569 315 150 58 5,5 Jaws ZS Hi-Tru 09 Top jaw, special width and height, soft, 16Mnr5, DIN 6350 Item no. huck size 1 1 105057 200 40 70 30.5 43 137090 250 50 80 36.5 53 143053 315 60 90 42 58 133259 200 50 80 30.5 43 133653 250 60 90 36.5 53 143057 315 80 110 42 58 15 Mounting bolt for top jaws, bolt 1 Item no. huck size Thread ontents of delivery 249299 100 M6x20 Stück 236949 125 M8x25 Stück 334571 160/200 M8x30 Stück 233025 250 M12x40 Stück 233026 315 M12x45 Stück 15 Mounting bolt for top jaws, bolt 2 Id.-Nr. huck size Thread ontents of delivery 216528 100 M6x16 Stück 233058 125/160/200 M8x20 Stück 227692 250 M12x25 Stück 233030 315 M12x30 Stück onfigure your individual clamping jaws online! www.web2product.biz on request 3051

Lathe and grinding chucks ccessories ZS Hi-Tru 09 ase plates for lathe chucks with cylindrical centre mount DIN 6350 09 Unfinished adapter plates for cylindrical mount The unfinished back plate must be machined and fitted on both machine and chuck side Item no. Size Item no. huck Size Inch mm mm mm D mm E mm 162793 160 162401 200 163036 250 133705 315 017113 80 3 ¼ 92 56 47 15 20 017114 100 4 120 80 58 20 25 017115 125 5 135 80 58 20 25 017116 160 6 ¼ 170 80 58 20 30 017117 200 8 210 92 66 22 40 017118 250 10 260 105 92 25 50 ccessories ZS Hi-Tru 09 hip guard, piece 09 Special grease F80 for lathe chucks for lubrication and conservation of chucking power Item no. Size ontents of delivery 108500 80/85 piece 108501 100/110 piece 108502 125 piece 108503 140/160 piece 108504 200 piece 108505 250 piece 108506 315/350/400 piece Item no. Design ontents 308555 artridge 0,5 kg 028975 Tin 1 kg 09 Scroll 09 Driving pinion Item no. Size Item no. Size Hexagon 102183 80/85 101754 100 101721 125 100303 160 100003 200 100203 250 101552 315 178473 100 9 178474 110 9 178475 125 10 178476 140 10 178477 160 11 178478 200 12 178480 250 14 178482 315 17 09 Pinion holder screw 09 Standard key Item no. Size Item no. Size Square Length mm 102185 85 100305 160 100006 270 101554 315 107426 80/85 6 62 107427 100/110 8 75 107428 125/140 9 80 107429 160 10 90 107430 200/230 11 100 107431 250/270 12 100 107432 315 14 110 09 Safety key with ejector 09 Elongated safety key with ejector Item no. Size Square Length mm Item no. Size Square Length mm 154370 80/85 6 110 154371 100/110 8 130 154372 125/140 9 130 154373 160 10 160 154374 200/230 11 160 154375 250/270 12 160 154376 315 14 200 154683 125/140 9 170 154685 160 10 180 154687 200/230 11 200 154689 250/270 12 200 154695 315 14 250 09 Safety adapter with ejector for actuating the chuck with torque (defined torque introduction) 09 Mounting screws with cylindrical centre rim Item no. Size Square Inch Item no. Size Thread ontents of delivery 178566 80/85 6 3/8 178567 100/110 8 1/2 178568 125/140 9 1/2 178569 160 10 1/2 178570 200/230 11 1/2 178571 250/270 12 1/2 178572 315/350 14 1/2 249299 74-85 M6x20 piece 334571 100-140 M8x30 piece 249301 160-230 M10x35 piece 233025 250-270 M12x40 piece 220565 315-350 M16x50 piece 3052 on request

huck dimensions ZS - ZSU and Orange Line huck dimensions ZS - ZSU and Orange Line For mounting on dividing heads and other attachments from the front, the lathe chucks with a cylindrical centre mount can also be supplied pre-drilled (at surcharge) G1, it is also possible to enlarge the bore (measure E, at surcharge) ylindrical centre mount DIN 6350 Enlarged bore max. Size 74 80 85 100 110 125 140 160 200 250 315 350 400 500 630 H6 56 56 60 70 80 95 105 125 160 200 260 290 330 420 545 2,5 3 3 3 3 4 4 4 4 5 5 6 5 5 7 D 32,5 39,5 39,5 50 50 56 60 65 73,5 82 95 100 105 120 135 E 15 19 19 20 27 32 40 42 55 76 103 115 136 190 240 E max - - - 21-33 43 50 70 92 114 120 150 210 253 F 63 67 72 83 95 108 120 140 176 224 286 318 362 458 586 G 3xM6 3xM6 3xM6 3xM8 3xM8 3xM8 3xM8 3xM10 3xM10 3xM12 3xM16 3xM16 3xM16 6xM16 6xM16 G 1 - - - - - 3xØ9* - 3xØ10,5 3xØ11 3xØ14 3xØ14-3xØ18 6xØ18 6xØ18 H 32 37 37 48 48 52 61 61 69 90 130 130 130 190 190 J 14 14 14 18 18 22,5 22,5 26 32,5 40 46 45 43 54,5 54,5 K 6 1) 6 6 8 8 9 9 10 11 12 14 14 17 19 19 L - - - 80,5-95,5 106 108 119,6 139,6 155 168,5 171,5 201,5 216,5 M - - - 47 47 56 66,7 66,7 79,5 95 109,5 127 127 127 127 V - - - 53,6 53,6 61 67,7 69,7 80,2 89,9 100,4 110,4 113,4 128,4 143,3 W 13 14,5 14,5 18 18 20 21 22,45 25,7 26,5 30 34 35 38 48 approx kg. 1 1,3 1,9 2,9 3,4 4,5 5,8 8,2 14,6 25,7 44,2 56 80 126 208 G1 = Mounting from front * 4-jaw huck dimensions ylindrical centre mount Enlarged bore max. SIze Ø 700 800 1000 1250 610 710 910 910 2) 7 +0,03 7 +0,03 7 +0,03 7 +0,03 D 147 147 157 157 E 310 380 460 550 E max. 330 420 580 580 F 660 760 950 950 3-Jaw 6xØ22 6xØ22 6xØ26 6xØ26 G 4-Jaw 8xØ22 8xØ22 8xØ26 6xØ26 K 19 19 24 24 L 240,6 240,6 269,6 269,6 M 210 210 210 210 N 360 460 610 610 3-Jaw 6xØ18 6xØ18 6xØ18 6xØ18 O 4-Jaw 4xØ18 4xØ18 4xØ18 6xØ18 V 158 158 166 166 W 48 48 53 53 ca. kg 280 350 590 850 1) Hexagon 2) daptor plate dimension 7-0,03 Position of fixing screws and pinions on lathe chucks with cylindrical centre mount sizes 74-630 (size 350 on request) Short taper mount DIN 55021, with setscrews and locknuts DIN 55027, with setscrews and locknuts Size 100 125 140 160 200 Taper size 3 3 4 3 4 5 3 4 5 3 4 5 6 53,9 53,9 63,5 53,9 63,5 82,5 53,9 63,5 82,5 53,9 63,5 82,5 106,4 D 75 69 69 74 74 74 66 66 66 74,5 74,5 74,5 74,5 E 20 32 32 40 40 40 42 42 42 51,2 55 55 55 DIN 75 75 85 75 85 75 85 75 85 F 104,8 104,8 aml. 70,6 70,6 82,5 70,6 82,5 70,6 82,5 70,6 82,5 104,8 133,4 P - - - - - - - - - 51,2 - - - Q - - - - - - - - - 33 - - - V 78,3 73,7 73,7 81,7 81,7 81,7 70,7 70,7 70,7 81,2 81,2 81,2 81,2 W 43 33 33 35 35 351) 23,45 23,45 23,45 26,7 26,7 26,7 26,7 Mounting holes DIN 3 3 3 3 3 4 3 3 4 3 3 4 4 3 3 3 3 3 6 3 3 6 3 3 6 6 ca. kg 4 5,5 7 8,5 15,5 1) 50 with amlock, other dimensions in the table on the top DIN 55029, with studs for amlock 3053

huck dimensions ZS - ZSU und Orange Line huck dimensions ZS - ZSU and Orange Line Short taper mount DIN 55021, with setscrews and locknuts Size 250 315 350 400 Taper size 4 5 6 8 5 6 8 11 6 8 11 6 8 11 63,5 82,5 106,4 139,7 82,5 106,4 139,7 196,9 106,4 139,7 196,9 106,4 139,7 196,6 D 83 83 83 83 96 96 96 104 122 122 122 106 106 106 huck dimensions DIN 55027, with studs and nuts DIN 55029, with studs for amlock E 60,7 76 76 76 79,6 103 103 103 103 115 115 103 136 136 F DIN 85 aml. 82,5 104,8 133,4 171,4 104,8 133,4 171,4 235 133,4 171,4 235 133,4 171,4 235 P 60,7 - - - 79,6 - - - 103 - - 103 - - Q 40,5 - - - 49 - - - 81 - - 54 - - V 90,9 90,9 90,9 90,9 101,4 101,4 101,4 109,4 127,4 127,4 127,4 114,4 114,4 114,4 W 27,5 27,5 27,5 27,5 31 31 31 39 56 56 56 36 36 36 Mounting DIN 3 4 4 4 4 4 4 6 4 4 6 4 4 6 holes aml. 3 6 6 6 6 6 6 6 6 6 6 6 6 6 approx. kg 30 50 71 84 Size 500 630 700 800 1000 1250 Taper size 8 11 15 11 15 11 15 15 20 15 20 15 20 139,7 196,9 285,8 196,9 285,8 196,9 285,8 285,8 412,8 285,8 412,8 285,8 412,8 D 122 122 122 137 137 149 149 149 149 159 159 159 159 E 136 190 190 192,7 240 310 310 380 380 460 460 550 550 F 171,4 235 330,2 235 330,2 235 330,2 330,2 463,6 330,2 463,6 330,2 463,6 P 136 - - 192,7-192,7 281,2 281,2-281,2 407,5 281,2 407,5 Q 61 - - 63-76 76 76-85 85 85 85 V 130,4 130,4 130,4 145,3 145,3 160 160 160 160 168 168 168 168 W 40 40 40 50 50 50 50 50 50 55 55 55 55 Mounting holes DIN 4 6 6 6 6 6 6 6 6 6 6 6 6 aml. 6 6 6 6 6 6 6 6 6 6 6 6 6 approx. kg 150 225 280 350 590 850 ll other dimensions should be taken from the table about chucks with cylindrical centre mount Short taper mount DIN 55026 Mounting from front Size 160 200 250 315 350 400 Taper size 5 5 6 5 6 8 6 8 6 8 8 11 82,5 82,5 106,4 82,5 106,4 139,7 106,4 139,7 106,4 139,7 139,7 196,9 D 66 74,5 74,5 83 83 83 96 96 122 122 106 106 E 42 42 55 76 55 76 103 76 103 76 136 125 F 2) - - - 104,8 - - 133,4-133,4-171,4 - G - - - 11 1) - - 14-14 - 18 - N 3) 61,9 61,9 82,6-82,6 111,1-111,1-111,1-165,1 O 11 1) 11 1 ) 14-14 18-18 - 18-22 V 70,7 81,2 81,2 90,9 90,9 90,9 101,4 101,4 127,4 127,4 114,4 114,4 W 23,45 26,7 26,7 275 275 275 31 31 56 56 36 36 Mounting * 3 3 6 3 6 6 6 6 6 6 6 6 holes ** 4 4 4 4 4 4 4 4 4 4 4 4 approx. kg 8 14,5 25 44,5 71 82 Size Ø 500 630 700 800 1000 1250 Taper Size 11 11 15 11 15 11 15 20 15 20 15 20 196,9 196,9 285,9 196,9 285,9 196,9 285,9 412,8 285,9 412,8 285,9 412,8 D 122 137 137 149 149 149 149 149 159 159 159 159 E 190 190 190 310 285 380 380 380 460 505 550 550 F 2) 235 235-235 330,2 235 330,2 463,6 330,2 463,6 330,2 463,62 G 22 22-22 26 22 26 26 26 26 26 26 N 3) - - 247,6 - - - - - - - - - O - - 26 - - - - - - - - - P - - - 193 281,2 193 281,2-281,2 407,5 281,2 407,5 Q - - - 76 76 76 76-85 85 85 85 V 130,4 145,3 145,3 159,9 159,9 159,9 159,9 159,9 168 168 168 168 W 40 50 60 50 50 50 50 50 55 55 55 55 Mounting holes * 3 6 6 6 6 6 6 6 8 8 8 8 ** 4 8 8 8 8 8 8 8 8 8 8 8 approx. kg 139 220 295 350 590 850 1) 12 with S 5.9 inch thread 3) With DIN 55026 Forme ; S 5.9 1/1 2) With DIN 55026 Forme and ; DIN 55021 Forme and ; S 5.9 1/2 * 3-Jaw ** 4-Jaw 3054

huck dimensions ZS - ZSU and Orange Line huck dimensions ZS - ZSU and Orange Line hucking capacities of jaw steps (standard values) External chucking Size 74 80 85 100 110 125 140 160 200 250 1 () 2-24 2-30 2-30 3-38 3-42 3-53 3-53 4-72 4-100 5-122 2 (D) 2-24 2-30 2-30 3-38 3-42 3-53 3-53 3-72 4-100 5-122 3 (D) 23-46 27-55 27-55 38-71 39-77 39-89 47-97 47-116 56-152 73-190 4 (D) 45-68 52-80 52-80 70-100 70-100 75-125 91-140 91-160 104-200 131-250 max. swing dia. 88 104 104 128 138 157 174 194 238 302 Jaw movement 11 14 14 15 19 25 25 34 48 58 Ø 74-630 Ø 700-1250 Size 315 350 400 500 630 700 800 1000 1250 1 6-135 20-180 20-200 35-260 50-350 110-350 150-450 250-600 320-600 2 6-135 20-180 20-200 35-260 50-350 280-672 325-853 425-1070 490-1150 3 96-225 110-270 110-300 140-360 190-490 356-748 400-928 500-1150 564-1224 4 186-315 200-350 200-400 280-500 330-630 - - - - max. swing dia. 395 440 480 600 730 1000 1170 1390 1476 Jaw movement 64 80 100 110 150 120 150 175 140 huck dimensions Internal chucking Size 74 80 85 100 110 125 140 160 200 250 J1 23-46 25-53 26-53 33-66 33-71 37-87 39-89 39-107 44-140 59-165 J2 45-68 50-78 50-78 65-94 65-104 73-123 83-132 83-152 92-186 119-236 Ø 74-630 Ø 700-1250 Size 315 350 400 500 630 700 800 1000 1250 J1 96-224 100-260 100-300 135-355 150-450 212-648 251-855 356-1080 426-1162 J2 186-305 190-350 190-390 275-460 290-590 290-758 326-930 430-1150 500-1236 J3 - - - - - 526-922 566-1094 660-1314 740-1400 lamping ranges for lathe chucks with individual adjustable jaws (EG-ES) are in approximate conformity with the above values. They are valid for 3- and 4-jaw chucks and lathe chucks with reversible jaws. Do not exceed maximum chucking ranges. Max. permissible speeds for ZG-ZS, ZGU-ZSU, ZG Hi-Tru chucks to DIN 6350 The maximum permissible speed has been fixed so that 1/3 of the gripping force is still available as residual gripping force if the maximum gripping is applied and the chuck is fitted with its heaviest jaws. The jaws may not project beyond the outside diameter of the chuck. The chuck must be in perfect condition. The speed limit for chucks with cast iron bodies is based on the permissible peripheral speed for cast iron. The specification DIN 6386 Part 1 shall be observed. 3 and 4 jaws Size ast iron body Steel body 74 5000-80 5000 7000 100 4500 6300 125 4000 5500 140 3700 5000 160 3600 4600 200 3000 4000 250 2500 3000 315 2000 2300 350 1700 1900 400 1600 1800 500 1000 1300 630 800 850 700 650 800 800 600 700 1000 480 560 1250 380 450 laming force 3 jaw chuck ZS - ZSU, Orange Line, ZS Hi-Tru to DIN 6350 The clamping force is sum total of all jaw forces acting radially on the stationary workpiece. The clamping forces are approximate values. To obtain the specified clamping forces, the chuck must be in a perfect condition and lubricated with F 80 lubricant recommended by RÖHM. Size Torque key Total clamping force 74 30 11 80 30 13 100 60 27 125 80 31 140 90 40 160 11 47 200 140 55 250 150 63 315 180 69 350 210 74 400 240 92 500 260 100 630 280 105 700 280 105 800 300 110 1000 450 115 1250 450 115 3055

Jaw dimensions ZS - ZSU, Orange Line, ZS Hi-Tru Jaw dimensions ZS - ZSU, Orange Line, ZS Hi-Tru Jaw dimensions Outward stepped jaw (inside jaw) Unstepped jaw, soft (block jaw) L Dimensions F and G apply to outward stepped jaws Dimensions J and K apply to inward stepped jaws D Size 74 1) 80/85 100/110 125 140 160 200 250 315 300/400 500/630 32 37 48 52 61 61 69 90 130 130 190 10 12 14 18 18 18 20 24 34 34 42 23 26 33,5 41,5 41,5 47,5 53,5 67,5 79,5 79,5 95 D 4,7 4,8 6,3 7,3 8,3 8,3 8,3 10,3 11,3 11,3 14,9 E 4 4,5 6 7 7 7 8 10 15 15 15 F 10 12 15 17 18 18 20 27 41,5 41,5 50 G 21 24,5 31 35 40 40 44 57 86,5 86,5 120 H 5 6 6 8 8 10 10 14 15 15 20 J - 12 14 16 17 17 19 26 40 40 50 K - 24,5 30 34 39 39 43 56 85 85 120 Jaw approx. kg 0,03 0,05 0,1 0,2 0,22 0,25 0,3 0,7 1,8 1,8 3,8 L 0,05 0,08 0,15 0,27 0,32 0,38 0,52 1 2,4 2,4 5,2 1) Reversible jaws ase jaw G Ø 100-400 Ø 500-630 Size 100/110 125 140 160 200 250 315 350/400 500 630 46 55 65 65 78 92 108 127 165 203-0,05 7,94 7,94 7,94 7,94 7,94 12,7 12,7 12,7 12,7 12,7 2,5 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 D +0,01 9,5 12,68 12,68 12,68 12,68 19,03 19,03 19,03 19,03 19,03 E 6 7,6 7,6 7,6 7,6 7,6 7,6 10,8 10,8 10,8 F 3,4 4,8 7,8 4,8 6,8 8 5,5 10,5 2) 8,5 8,5 G 12 13 15,8 15,8 19 22,2 25,4 28,5 28,5 28,5 H 24 32 38,1 38,1 44,45 54 63,5 76,2 38,1 38,1 J metr. M6 M8 M8 M8 M8 M12 M12 M16 M20 M20 UN 1/4"-20 5/16"-18 3/8"-16 3/8"-16 3/8"-16 1/2"-13 1/2"-13 5/8"-11 3/4"-10 3/4"-10 K 12 14,5 16 16 16 20 25 29 33 33 L 19,25 22,6 28,5 28,5 34,9 39,7 47,6 57,1 57,1 57,1 M - - - - - - - - 38,1 38,1 N 14 18 18 18 20 24 34 34 42 42 O 19,5 24 27 27 28 35 40 45 49 49 Grooves 1 1 1 1 1 1 1 1 2 3 Tapped holes 2 2 2 2 2 2 2 2 4 5 Jaw approx. kg 0,06 0,12 0,17 0,17 0,22 0,4 0,78 1 1,72 2,1 Ø 700-1250 Size 700 800 1000 1250 253 291 329 367-0,05 12,7 12,7 12,7 12,7 3,1 3,1 3,1 3,1 D +0,01 19,03 19,03 19,03 19,03 E 10,8 10,8 10,8 10,8 F 11 11 9 9 G 28,5 28,5 28,5 28,5 H 38,1 38,1 38,1 38,1 J metr. M20 M20 M20 M20 UN 3/4"-10 3/4"-10 3/4"-10 3/4"-10 K 37 37 37 37 L 57,1 57,1 57,1 57,1 M 38,1 38,1 38,1 38,1 N 55 55 55 55 O 62 62 62 62 Grooves 4 5 6 7 Tapped holes 6 7 8 9 Jaw approx. kg 6,2 7,1 8 9 1) Reversible jaws 2) Size 3056

Jaw dimensions ZS - ZSU, Orange Line, ZS Hi-Tru Jaw dimensions ZS - ZSU, Orange Line, ZS Hi-Tru Reversible top jaw U huck Size 100 110 125 140 160 200 230 250 270 315 350 400 500 630 700 800 1000 1250 1 47 56 66,7 79,5 95,3 109,5 127 127 210 210 2 53 62 74 87 103 120 137 140 210 210 1 22 26 28 30 36 42 42 50 68 68 2 22,5 26,5 28,5 30,5 36,5 42,5 42,5 50,5 68 68 1 29,5 37,5 41,5 42,5 52,5 57,5 64,5 79,5 89 110 2 30 38 42 43 53 58 65 80 89 110 D 5,5 7,6 7,6 7,6 7,6 7,6 10,8 10,8 10,8 10,8 E 7,96 7,96 7,96 7,96 12,72 12,72 12,72 12,72 12,72 12,72 F 2,5 3,1 3,1 3,1 3,1 3,1 6,35 6,35 6,35 6,35 G 9,50 12,68 12,68 12,68 19,03 19,03 19,03 19,03 19,03 19,03 H 19,25 22,6 28,5 34,9 39,7 47,6 57,1 57,1 57,1 57,1 J 12 13 15,8 19 22,2 25,4 28,5 28,5 28,5 28,5 K 24 32 38,1 44,45 53,95 63,5 76,2 76,2 76,2 76,2 L 6,6 9 9 1) 10,5 2) 9 1) 10,5 2) 14 14 18 22 22 22 M 11 15 15 1) 16 2) 15 1) 16 2) 20 20 26 33 33 33 N 7 9 10 10 13,5 13,5 17 21 21,5 21,5 O 12 13 15,8 19 22,2 25,4 28,5 54,6 51 51 P 29,5 35 42,8 51,5 60,2 67,4 77 88,5 89 89 R 6 8 10 10 14 15 15 20 22 25 S 22,25 25,6 32,2 38,7 43,5 52,9 62,1 63,6 70 70 T 15 16 19,5 22,8 26 30,7 33,55 35 41,5 41,5 U 19 27 30 30 41 43 47 61 65 71 V - - - - - - - - 38,1 38,1 Jaw approx. kg U 0,12 0,19 0,27 0,39 0,66 1,02 1,27 2 4,45 6,1 0,21 0,34 0,5 0,7 1,2 1,86 2,18 3,04 8 10,8 Jaw dimensions Saw-tooth standard model ross-grooving from size 250 available from size 700 standard-model Unstepped top jaw soft Special-design jaws for non-rotating clamping devices, for symmetrical components, for machine vices and N-compact vices available in all desired modifications 3057

Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1, hardened), the force is transferred via a bevel gearing to a hardened spiral ring (2) and further conducted via the spiral to the base jaws (3, hardened and ground), spindle (4, hardened) and reversible jaws (5, hardened and ground). The position of the workpiece can be adjusted by turning the spindle. Steel body (6), cover (7). lamping force transfer system The jaws can be adjusted over the entire clamping range by turning the key. Lubrication To maintain the clamping force, rotary chucks must be lubricated regularly. You will find corresponding information in the operating instructions which are enclosed with every chuck. ll rotary chucks are provided with grease nipples for easy maintenance. 6 ase jaw G, hardened and ground 5 4 3 2 1 Reversible top jaw U, hardened and ground 7 Unstepped jaw L unstepped, soft, material 16Mnr5 3058

Geared scroll chucks with independently adjustable jaws ES PPLITION Optimized for the machining of irregularly shaped workpieces. TYPE Face spiral chucks in steel design with which irregularly shaped workpieces can be aligned via adjusting spindles. USTOMER ENEFITS Exact alignment of irregularly shaped workpieces Jaws centrically clamping and individually adjustable Die-forged spiral ring, series-balanced and hardened Jaws in chuck ground out for concentricity TEHNIL FETURES - With one set each of base and reversible jaws - lamping wrench - Dimensions and take-ups in acc. with DIN 6351 - Hardened spiral ring - Die-forged steel body Geared scroll chuck ES 09 DIN 6351, cylindrical centre mount, form Size ylindrical centre mount Through-hole mm 3 jaw chuck steel 4 jaw chuck steel Torque Nm Total clamping force kn 160 125 42 111360 111789 110 47 200 160 55 111365 111793 140 55 250 200 76 111370 111797 150 63 315 260 103 111375 111801 180 69 400 330 136 111380 111805 240 92 500 420 190 111385 111809 260 100 630 545 240 111390 111813 280 105 Further sizes and mountings available on request on request 3059

Jaws ES 09 Reversible jaw U, hardened Geared scroll chucks with independently adjustable jaws huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 160 110118 110124 69 50 20 200 139666 139670 85 57,5 24 250 139667 139671 90 67,5 24 315/400 139668 139672 130 79,5 34 500/630 139669 139673 190 95 42 09 Unstepped jaw L, unstepped, soft huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width Jaws ES 160 107669 107675 69 50 20 200 139674 139678 85 57,5 24 250 139675 139679 90 67,5 24 315/400 139676 139680 130 79,5 34 500/630 139677 139681 190 95 42 09 ase jaw G, hardened huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 160 107654 107662 62 15,3 26 200 139682 139686 78 17,8 30 250 139683 139687 86 17,8 30 315 139684 139688 118 22,7 44 400 139685 139689 118 22,7 44 500/630 107659 107667 176 25 54 onfigure your individual clamping jaws online! www.web2product.biz 3060 on request

ccessories ES Geared scroll chucks with independently adjustable jaws 09 ase plates for lathe chucks with cylindrical centre mount DIN 6350 09 Unfinished adapter plates for cylindrical mount The unfinished back plate must be machined and fitted on both machine and chuck side Item no. Size Item no. huck Size Inch mm mm mm D mm E mm 162793 160 162401 200 163036 250 133705 315 017114 100 4 120 80 58 20 25 017115 125 5 135 80 58 20 25 017116 160 6 ¼ 170 80 58 20 30 017117 200 8 210 92 66 22 40 017118 250 10 260 105 92 25 50 15 Special grease F80 for lathe chucks for lubrication and conservation of chucking power Item no. Design ontents 15 djusting spindle Item no. For chuck size ccessories ES 308555 artridge 0,5 kg 028975 Tin 1 kg 103199 100 104251 125 104271 160 137735 200 137643 250 137701 400 137716 500 09 djusting key 09 Scroll Item no. For chuck size Square Hexagon Item no. Size 107444 160 5,5-139695 400-8 139696 500-12 101754 100 101721 125 100303 160 100003 200 100203 250 101552 315 102497 400 162973 500 162964 630 09 Driving pinion 09 Pinion holder screw Item no. Size Hexagon Item no. Size 178473 100 9 178475 125 10 178477 160 11 178478 200 12 178480 250 14 178482 315 17 178483 400 19 178484 500 22 178485 630 22 100305 160 100006 270 101554 315 102499 400 103300 630 on request 3061

ccessories ES Geared scroll chucks with independently adjustable jaws 09 Standard key 09 Safety key with ejector Item no. Size Square Length mm Item no. Size Square Length mm 107427 100/110 8 75 107428 125/140 9 80 107429 160 10 90 107430 200/230 11 100 107431 250/270 12 100 107432 315 14 110 107433 350 14 140 107434 400 17 140 107435 500/630 19 150 154371 100/110 8 130 154372 125/140 9 130 154373 160 10 160 154374 200/230 11 160 154375 250/270 12 160 154376 315 14 200 154377 350 14 200 154378 400 17 250 154379 500/630 19 250 ccessories ES 09 Elongated safety key with ejector 09 Safety adapter with ejector for actuating the chuck with torque (defined torque introduction) Item no. Size Square Length mm 154683 125/140 9 170 154685 160 10 180 154687 200/230 11 200 154689 250/270 12 200 154695 315 14 250 Item no. Size Square Inch 178566 80/85 6 3/8 178567 100/110 8 1/2 178568 125/140 9 1/2 178569 160 10 1/2 178570 200/230 11 1/2 178571 250/270 12 1/2 178572 315/350 14 1/2 15 Mounting screws for lathe chucks with direct short-taper, for front mounting 15 Set screw with nut DIN 55021 Item no. Size Thread ontents of delivery huck Size Taper size 233059 74 M10x70 piece 160 5 308436 80 M10x85 piece 200 5 200186 85 M12x85 piece 200 6 234615 100 M10x110 piece 250 5 302215 110 M12x90 piece 250 6 202439 125 M16x90 piece 250 8 316244 140 M12x120 piece 315 6 308439 160 M16x105 piece 315 8 342701 315 M16x130 piece 400 8 698878 350 M20x115 piece 400 11 011528 400 M20x155 piece 500 11 358815 500 M20x170 piece 630 11 202509 630 M24x150 piece 630 15 09 Stud and locknut ISO 702-3 (DIN 55027) Item no. Thread ontents of delivery For taper 107447 M10x34 piece 3 3 107448 M10x39 piece 4 3 107449 M10x43 piece 5 4 107450 M12x50 piece 6 4 107451 M16x60 piece 8 4 107452 M20x75 piece 11 6 125650 M24x90 piece 15 6 Quantity 09 09 Item no. Thread For taper Quantity 107453 M10x30 4 3 107455 M10x35 5 4 107456 M12x40 6 4 107457 M16x45 8 4 107458 M20x55 11 6 127618 M24x65 15 6 Stud for amlock S 5.9 (DIN 55029) and cylindrical studs Item no. Thread For taper Quantity 107465 7/16-20x35 3 3 107466 7/16-20x37 4 3 107467 ½-20x43 5 6 107468 5/8-18x49 6 6 107469 ¾-16x55,5 8 6 107470 7/8-14x67 11 6 127621 1-14x76 15 6 Stud for amlock ISO 702-2 (DIN 55029) and cylindrical studs Item no. Thread For taper Quantity 178364 M10x1 3 3 178365 M10x1 4 3 178366 M12x1 5 6 178367 M16x1,5 6 6 178368 M20x1,5 8 6 178369 M22x1,5 11 6 178370 M24x1,5 15 6 178371 M27x2 20 6 3062 on request

huck dimensions ES huck dimensions ES ylindrical centre mount DIN 6351 The bore could be enlarged (measure E, at surcharge) Enlarged bore max. Short taper mount DIN 55021 with setscrews and nuts DIN 55027 with studs and locknuts vailable on request! Size 100 125 160 200 250 315 400 500 630 H6 70 95 125 160 200 260 330 420 545 3 4 4 4 5 5 5 5 7 D 67 71 80 95,5 100 117 123 145 160 E 20 32 42 55 76 103 136 190 240 E max. 21 33 50 70 92 114 150 210 253 F 83 108 140 176 224 286 362 458 586 G 3xM8 3xM8 3xM10 3xM10 3xM12 3xM16 3xM16 6xM16 6xM16 H 56 56 69 85 90 130 130 190 190 J 22 21 28 32,5 40,6 46,5 47 55 55 K 8 9 10 11 12 14 17 19 19 R* 5,5 5,5 5,5 8 8 8 8 12 12 W 20 20 22,45 25,7 26,5 30 35 38 48 approx. kg 4 6 10 18 29 54 88 145 240 * from Ø 200 hexagon Size 125 160 200 250 Short-taper size 3 4 4 5 6 4 5 6 5 6 8 53,9 63,5 63,5 82,5 106,4 63,5 82,5 106,4 82,5 106,4 139,7 D 84 84 81 81 81 96,5 96,5 96,5 101 101 101 E 32 32 42 42 42 55 55 55 76 76 76 F DIN 75 85 85 85 104,8 133,4 amlock 70,6 82,5 82,5 82,5 104,8 133,4 104,8 133,4 171,4 W 21 21 23,45 23,45 23,45 26,7 26,7 26,7 27,5 27,5 27,5 Mouting DIN 3 3 3 4 4 3 4 4 4 4 4 holes amlock 3 3 3 6 6 3 6 6 6 6 6 approx. kg 6 10 19 30 huck dimensions ES DIN 55029 with studs for camlock vailable on request! Size 315 400 500 630 Short-taper size 6 8 11 8 11 11 15 11 15 106,4 139,7 196,9 139,7 196,9 196,9 285,8 196,9 285,8 D 118 118 118 124 124 147 147 162 162 E 103 103 103 136 136 190 190 240 240 F 133,4 171,4 235 171,4 235 235 330,2 235 330,2 P - - - - - - - 192,7 - Q - - - - - - - 88 - W 31 31 31 36 36 40 40 50 50 Mouting DIN 4 4 6 4 6 6 6 6 6 holes amlock 6 6 6 6 6 6 6 6 6 aporox. kg 56 92 155 250 ll other dimensions should be taken from the table on the top DIN 55026 Mounting from front vailable on request! Size 160 200 250 315 400 500 630 Short-taper size 5 5 6 6 8 6 8 8 11 11 11 15 82,5 82,5 106,4 106,4 139,7 106,4 139,7 139,7 196,9 196,9 196,9 285,8 D 81 96,5 96,5 101 101 118 118 124 124 147 162 162 E 42 42 55 55 76 103 76 136 125 190 190 190 F3) - - - - - 133,4-171,4-235 235 - G - - - - - 14-18 - 22 22 - N2) 61,9 61,9 82,6 82,6 111,1-111,1-165,1 - - 247,6 O 11 1) 11 1) 14 14 18-18 - 22 - - 26 W 23,45 26,7 26,7 27,5 27,5 31 31 36 36 40 50 50 Mouting * 3 3 6 6 6 6 6 6 6 6 6 6 holes ** 4 4 4 4 4 4 4 4 4 8 8 8 approx. kg 10 19 30 56 92 154 250 238 1) 12 with S 5.9 1/2 inch, all other dim. should be taken from the above table. 3) With DIN 55026 Form and ; DIN 55021 Forme and ; S 5.9 1/2 2) With DIN 55026 form ; S 5.9 1/1 * 3-Jaw ** 4-Jaw 3063

huck dimensions ES huck dimensions ES Max. permissible speeds for chucks EG-ES to DIN 6351 The specified values are only applicable for workpieces not exceeding a specific unbalance of 25 gmm/kg. Size 3-Jaw 4-Jaw Steel body Steel body 100 - - 125 - - 160 3200 2850 200 2650 2350 250 2200 1900 315 1400 1220 400 1400 1220 500 880 770 630 750 660 huck dimensions ES Reversible jaw U Size 100 125 160 200 250 315 400 500 630 56 56 69 85 90 130 130 190 190 18 18 20 24 24 34 34 42 42 41,5 41,5 50 57,5 67,5 79,5 79,5 95 95 D 8,7 8,7 9,7 9,7 9,7 11,15 11,15 15 15 E 7 7 8 10 10 15 15 15 15 F 17 17 19 25 26 40 40 50 50 G 35 35 43 54 56 85 85 120 120 H 8 8 10 12 14 15 15 20 20 Thread Tr14x3 Tr14x3 Tr16x4 Tr18x2 Tr18x2 Tr20x2 Tr20x2 Tr26x3 Tr26x3 approx. kg 0,18 0,18 0,3 0,53 0,7 1,7 1,7 3,7 3,7 Left-hand thread 3064

Lever scroll chucks KRF PPLITION Three- and four-jaw chuck for positioning and conveying workpieces, e.g. on measuring machines. TYPE Face spiral chuck in cast iron version. USTOMER ENEFITS Easy clamping of the workpiece by turning the clamping ring Sizes 125-200: 4 setscrews for fine adjustment ast iron body Jaws in chuck ground out for concentricity Lever scroll chucks KRF TEHNIL FETURES - 6 jaw chuck for grinding twist drills on request available 09 Lever scroll chucks KRF, cylindrical centre mount Size ylindrical centre mount Through-hole mm 3 jaw chuck with inside and outside jaw 4 jaw chuck with inside and outside jaw Torque Nm 70 48 16 148793 1) 148794 12 2,5 110 75 26 148757 148772 26 3,2 125 70 35 150757 150758 36 3,5 160 78,5 52 150759 150760 50 4 200 115 64 150761 150762 60 4,5 1) jaws reversible Sizes 125-200: 4 setscrews for fine adjustment Further sizes and mountings available on request Total clamping force kn 3066 on request

Lever scroll chucks KRF - on base plate PPLITION Three-jaw chuck with base plate for positioning and conveying workpieces, e.g. on measuring machines. TYPE Face spiral chuck in cast iron version. USTOMER ENEFITS Easy clamping of the workpiece by turning the clamping ring Sizes 125-200: 4 setscrews for fine adjustment ast iron body TEHNIL FETURES - Mounted in the chuck with one set of jaws stepped outward () - One set of jaws stepped inward (D) - Size 70 with reversible jaws - Fastening screws Lever scroll chucks KRF 09 Lever scroll chucks with base plate 3-jaw-chuck cast iron body Item no. Size Through-hole mm D mm Torque Nm Total clamping force kn 150595 1) 70 16 46,4 12 2,5 150596 110 26 50 26 3,2 150597 125 35 59 36 3,5 150598 160 52 59 50 4 150599 200 64 69 60 4,5 1) jaws reversible Further sizes and mountings available on request on request 3067

Jaws KRF Lever scroll chucks 09 Inside jaw DIN 6350, outward stepped jaw, hardened huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 70 110154 1) 149305 1) 32 23 10 100 110156 110064 48 33,5 14 125 110157 110065 52 41,5 18 160 110159 110067 61 47,5 18 200 110160 110068 69 53,5 20 1) Reversible, for use as turning or inside jaws dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 09 Outside jaw D DIN 6350, inward stepped jaw, hardened Jaws KRF huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 100 110166 110074 48 33,5 14 125 110167 110075 52 41,5 18 160 110169 110077 61 47,5 18 200 110170 110078 69 53,5 20 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 09 Unstepped jaw L DIN 6350, unstepped, soft, 16Mnr5 huck Size 3-jaw set 4-jaw set Jaw length Jaw height Jaw width 70 109114 1) 149304 1) 32 23 10 100 107589 107599 48 33,5 14 125 107590 107600 52 41,5 18 160 107592 107602 61 47,5 18 200 107593 107603 69 53,5 20 1) Reversible ccessories KRF 09 Unfinished adapter plates for cylindrical mount The unfinished back plate must be machined and fitted on both machine and chuck side 09 hip guard, piece Item no. huck Size Inch mm mm mm D mm E mm Item no. Size ontents of delivery 017114 100 4 120 80 58 20 25 017115 125 5 135 80 58 20 25 017116 160 6 ¼ 170 80 58 20 30 017117 200 8 210 92 66 22 40 108501 100/110 piece 108502 125 piece 108503 140/160 piece 108504 200 piece 15 Special grease F80 for lathe chucks for lubrication and conservation of chucking power Item no. Design ontents 308555 artridge 0,5 kg 028975 Tin 1 kg onfigure your individual clamping jaws online! www.web2product.biz 3068 on request

Jaw cutting attachment V PPLITION For turning out unhardened and grinding out hardened jaws, adjusting jaws reversible and infinitely variably adjustable. TYPE Lightweight design. USTOMER ENEFITS Using the V, the chuck can be put into the status it assumes later during workpiece machining (preclamping) within a few seconds The turned clamping surfaces of the chuck jaws are thus form-fit and exactly concentric in the clamped state ypassing a large clamping range Jaw cutting attachment V TEHNIL FETURES - Only applicable with base jaws (G) and top jaws () 09 Jaw cutting attachment for three-jaw chucks Item no. Size For chuck size lamping force max. kn External Ø mm Inner Ø Overhang distance mm Thread Weight Ø J mm Ø mm approx. kg 220206 0 125 15 153 110 50-115 150-215 20 M5 1,6 220207 1 200 30 176 110 35-125 170-260 31 M8 3,4 220208 2 250 30 215 135 70-140 215-285 31 M8 5 220209 3 250 30 244 162 100-175 240-315 31 M8 5,7 220210 4 315 30 290 208 145-215 290-360 31 M8 6,9 220211 5 400 40 342 260 160-270 330-440 31 M10 8,5 3070 on request

dapter plates dapter plates 09 Short-taper adapter plate ISO 702-3 (DIN 55027) and 55022 with studs and locknuts Item no. Ø mm Taper Inch mm mm D mm E mm F mm G Weight approx. kg 319650 125 3 5 19 102 53,975 40 75 M10 2,3 319651 125 4 5 19 112 63,513 40 85 M10 2,2 319652 160 3 6 ¼ 21 102 53,975 40 75 M10 3,9 319653 160 4 6 ¼ 21 112 63,513 40 85 M10 3,9 319654 160 5 6 ¼ 21 135 82,563 40 104,8 M10 4,6 319655 200 4 8 21 112 63,513 50 85 M10 6,4 319656 200 5 8 21 135 82,563 50 104,8 M10 7,4 319657 200 6 8 23 170 106,375 50 133,4 M12 8,4 319658 250 4 1 21 112 63,513 61 85 M10 10,2 319659 250 5 10 21 135 82,563 63 104,8 M10 11,6 319660 250 6 10 23 170 106,375 63 133,4 M12 13,3 319661 250 8 10 26 220 139,719 63 171,4 M16 13,8 319662 315 5 12 ¼ 26 135 82,563 63 104,8 M10 18,6 319663 315 6 12 ¼ 26 170 106,375 63 133,4 M12 21,5 319664 315 8 12 ¼ 26 220 139,719 63 171,4 M16 22,6 319665 315 11 12 ¼ 33 290 196,869 63 235 M20 25,2 319666 400 6 15 ¾ 31 170 106,375 63 133,4 M12 35 319667 400 8 15,75 31 220 139,719 63 171,4 M16 37,2 319668 400 11 15,75 31 290 196,869 63 235 M20 42 319669 400 15 15,75 33 400 285,775 63 330,2 M24 42,1 319670 500 8 20 41 220 139,719 80 171,4 M16 62 319671 500 11 20 41 290 196,869 80 235 M20 67 319672 500 15 20 41 400 285,775 80 330,2 M24 68 dapter plates 09 Short-taper adapter plate ISO 702-2 (DIN 55029) and S 5.9 D1, amlock Item no. Ø mm Taper Inch mm mm D mm E mm F mm G Weight approx. kg 319673 125 3 5 27 92,1 53,975 40 70,66 7/16-20 2,3 319674 125 4 5 28 117,5 63,513 40 82,55 7/16-20 2,2 319675 160 3 6 ¼ 27 92,1 53,975 40 70,66 7/16-20 3,9 319676 160 4 6 ¼ 28 117,5 63,513 40 82,55 7/16-20 3,9 319677 160 5 6 ¼ 31 146 82,563 40 104,8 ½ - 20 4,6 319678 200 4 8 28 117,5 63,513 50 82,55 7/16-20 6,4 319679 200 5 8 31 146 82,563 50 104,8 ½ - 20 7,4 319680 200 6 8 36 181 106,375 50 133,4 5/8-18 8,4 319681 250 4 1 28 117,5 63,513 61 82,55 7/16-20 10,2 319682 250 5 10 31 146 82,563 63 104,8 ½ - 20 11,6 319683 250 6 10 36 181 106,375 63 133,4 5/8-18 13,3 319684 250 8 10 39 225,4 139,719 63 171,4 ¾ - 16 13,8 319685 315 5 12 ¼ 31 146 82,563 63 104,8 ½ - 20 18,6 319686 315 6 12 ¼ 36 181 106,375 63 133,4 5/8-18 21,5 319687 315 8 12 ¼ 39 225,4 139,719 63 171,4 ¾ - 16 22,6 319688 315 11 12 ¼ 45 298,4 196,869 63 235 7/8-14 25,2 319689 400 6 15 ¾ 36 181 106,375 63 133,4 5/8-18 35 319690 400 8 15,75 39 225,4 139,719 63 171,4 ¾ - 16 37,2 319691 400 11 15,75 45 298,4 196,869 63 235 7/8-14 42 319692 400 15 15,75 50 403 285,775 63 330,2 1-14 42,1 319693 500 8 20 41 225,4 139,719 80 171,4 ¾ - 16 62 319694 500 11 20 45 298,4 196,869 80 235 7/8-14 67 319695 500 15 20 50 403 285,775 80 330,2 1-14 68 Further sizes and designs, such as ISO 702-1, available on request! on request 3071

JWS INDIVIDULLY DJUSTLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072

INDEPENDENT HUKS Independent chucks from RÖHM are particularly successful and effective when force has top priority. Due to the increased rigidity and optimal wear behavior, they are especially suitable for the initial machining of irregular, regular and round workpieces and make high machining forces and a longer machine service life possible. DVNTGES T GLNE Independent chucks Safe and easy clamping of irregular, regular, as well as round workpieces by four independently adjustable jaws Easy rough centering by means of concentric rings on the chuck body Direct force transfer through radially arranged threaded spindles oncentric rings for easy rough centering Massive steel body is particularly wear-resistant and optimally suited for high machining forces Radially arranged threaded spindle transfers force directly to the respective jaws Jaws individually adjustable via threaded spindle 3073

USE - USU Steel independent chucks PPLITION lamping chucks for lathes on which large, heavy or irregularly shaped workpieces are clamped. TYPE Independent four-jaw chuck in steel design. Jaws individually adjustable via threaded spindle (no central drive). Starting from size 315 with T-slots. Starting from size 1100 with T-slots and set-up slots. USTOMER ENEFITS oncentric rings for visual rough centering, fine centering using dial gauge Steel independent chucks USE-USU TEHNIL FETURES - Steel design incl. clamping wrench and fastening screws, as well as 1 set of reversible or base and top jaws 26 ylindrical centre mount (without mounting bolts) Size with one-piece reversible jaws with base jaws and top jaws Through-hole mm Speed max. min -1 Torque Nm lamping force/ jaw kn 260 139781 137147 70 2350 120 17 310 139796 139720 75 1970 120 17 400 139827 135368 95 1530 170 23 450 139842 136944 95 1360 170 23 500 139857 135631 95 1220 170 23 630 139887 139723 135 970 240 37 710 140800 141097 135 860 240 37 800 140801 141106 190 765 300 45 Further sizes and mountings available on request 26 ISO 702-3 (DIN 55027), DIN 55022 Size Mount short taper with one-piece reversible jaws with reversible top jaws Through-hole mm Speed max. min -1 Torque Nm lamping force/ jaw kn 260 4 139782 137163 61 2350 120 17 260 5 139783 137164 70 2350 120 17 260 6 139784 137165 70 2350 120 17 310 5 139797 139724 75 1970 120 17 310 6 139798 139725 75 1970 120 17 310 8 139799 139726 75 1970 120 17 400 6 139828 135371 95 1530 170 23 400 8 139829 135372 95 1530 170 23 400 11 139830 135358 95 1530 170 23 450 6 139843 136947 95 1360 170 23 450 8 139844 136948 95 1360 170 23 450 11 139845 136957 95 1360 170 23 500 6 139858 135632 95 1220 170 23 500 8 139859 135633 95 1220 170 23 500 11 139860 135696 95 1220 170 23 630 8 139888 139767 136 970 240 37 630 11 139889 139768 136 970 240 37 630 15 139890 139769 136 970 240 37 710 8 141088 141098 136 860 240 37 710 11 141089 141099 136 860 240 37 800 8 141092 600638 200 765 300 45 800 11 141093 141107 192 765 300 45 800 15 141094 141108 192 765 300 45 900 11-600639 190 680 300 45 900 15-600641 190 680 300 45 Further sizes and mountings available on request 3074 on request

Steel independent chucks USE - USU Size Mount short taper with one-piece reversible jaws with reversible top jaws Through-hole mm Speed max. min -1 Torque Nm lamping force/ jaw kn 1000 11-141115 190 610 320 47 1000 15-141116 190 610 320 47 1000 20-600645 190 610 320 47 1100 11-150500 190 555 320 47 1100 15-600642 190 555 320 47 1100 20-600646 190 555 320 47 1200 11-150501 190 510 450 64 1200 15-600643 190 510 450 64 1200 20-600647 190 510 450 64 Further sizes and mountings available on request 26 ISO 702-2 (DIN 55029), S 5.9, type D, with studs for amlock Size Mount short taper with one-piece reversible jaws with reversible top jaws Through-hole mm Speed max. min -1 Torque Nm lamping force/ jaw kn 260 4 139791 137166 60 2350 120 17 260 5 139792 137254 70 2350 120 17 260 6 139793 137255 70 2350 120 17 310 5 139806 139733 75 1970 120 17 310 6 139807 139734 75 1970 120 17 310 8 139808 139735 75 1970 120 17 400 6 139837 135375 95 1530 170 23 400 8 139838 135376 95 1530 170 23 400 11 139839 135359 95 1530 170 23 450 6 139852 136951 95 1360 170 23 450 8 139853 136952 95 1360 170 23 450 11 139854 136955 95 1360 170 23 500 6 139867 135703 95 1220 170 23 500 8 139868 135704 95 1220 170 23 500 11 139869 135705 95 1220 170 23 630 8 139897 139776 136 970 240 37 630 11 139898 139777 136 970 240 37 630 15 139899 139778 136 970 240 37 710 8 140804 141102 136 860 240 37 710 11 140805 141103 136 860 240 37 710 15-141418 136 860 240 37 800 11 140810 141111 192 765 300 45 800 15 140811 141112 192 765 300 45 900 11-600660 190 680 300 45 900 15-600661 190 680 300 45 1000 11-141119 190 610 320 47 1000 15-141120 190 610 320 47 1000 20-600665 190 610 320 47 1100 11-150504 190 555 320 47 1100 15-600662 190 555 320 47 1100 20-600666 190 555 320 47 1200 11-150505 190 510 450 64 1200 15-600663 190 510 450 64 1200 20-600667 190 510 450 64 Further sizes and mountings available on request Steel independent chucks USE-USU on request 3075

Steel independent chucks Jaws USE - USU 09 Reversible jaw E, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 022985 260 set 85 64 35 022986 310 set 94 66 35 163108 400/450 set 112 80 40 163109 500 set 136 88 40 175358 630/710 set 172 108 45 247823 800 set 185 130 60 Jaws USE-USU 09 ase jaw G with fixing screw Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 304656 260 set 91 40,1 35 304657 310 set 107 40,1 35 304658 400/450 set 126 47,1 40 304659 500 set 164,4 47,1 40 304660 630 set 165 51,1 45 304661 710 set 202 51,1 45 304662 800/900/1000/1100 set 240 61,1 60 150543 1200 set 350 92,2 70 09 Reversible top jaws U DIN 6350, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 108057 260 set 95,3 52,5 36 108058 310 set 109,5 57,5 42 108059 400/450 set 127 64,5 42 108060 500/630/710 set 127 79,5 50 105085 800/900 set 210 89 68 105101 1000/1100/1200 set 210 110 68 dditionally or later purchased, hardened jaws must be ground out in the chuck. For jaws which are applied later, send in the chuck. 09 Unstepped top jaw DIN 6350, soft, material 16Mnr5 Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 107579 260 set 103 53 36,5 107580 310 set 120 58 42,5 107581 400/450 set 137 65 42,5 107582 500/630/710 set 140 80 50,5 105105 800/900 set 210 89 68 105109 1000/1100/1200 set 210 110 68 onfigure your individual clamping jaws online! www.web2product.biz 3076 on request

Steel independent chucks ccessories USE - USU 26 djusting spindle Item no. Size Square Hexagon 26 Safety key 169142 260 10-166565 310 10-162110 400 13-162121 450 13-161629 500 13-161611 630 16-247826 800 18-150544 900 18-150545 1000 18-150546 1100 18-149776 1200-24 Item no. Size Square Hexagon ccessories USE-USU 160096 260/310 10-160097 400 13-160098 450/500 13-160099 630/710 16-160100 800/900/1000/1100 18-150548 1200-24 on request 3077

huck dimensions USE - USU huck dimensions USE - USU huck dimensions USE - USU ylindrical centre mount Short taper mount DIN 55021 with setscrews and locknuts DIN 55027 with studs and nuts Size 260 310 400 450 500 630 710 800 H8 130 130 210 210 210 260 260 370 8 8 18 18 18 18 18 18 D USE - USU 85 95 112,5 112,5 112,5 122,5 132,5 145 E USE - USU 70 75 95 95 95 135 135 180 F 105 105 175 175 175 220 220 330 G 4x13,5 4x13,5 4x17 4x17 4x17 4x20,5 4x20,5 8x22 H 85 94 112 112 136 172 172 185 J 34 35 41,5 42 50 55,5 55,5 80 K 35 35 40 40 40 45 45 60 L 80 87 105 114 126 140 165 210 M 56,5 60,5 54 54 69 69 69 91 N 100 105 125 135 145 165 185 240 SW 10 10 13 13 13 16 16 18 approx. kg 23 32 52 76 91 150 190 270 1) Outer hexagon Size 260 310 400 450 500 630 Taper size 4 1) 5 2) 6 5 6 8 6 8 11 6 8 11 6 8 11 8 11 15 63,5 82,5 106,4 82,5 106,4 139,7 106,4 139,7 196,9 106,4 139,7 196,9 106,4 139,7 196,9 139,7 196,9 285,8 D 75 82 112,5 112,5 112,5 122,5 E 61 70 70 75 95 95 95 135 F DIN 85 amlock 82,6 104,8 133,4 104,8 133,4 171,4 133,4 171,4 235 133,4 171,4 235 133,4 171,4 235 171,4 235 330,2 G 11 11 14 11 14 18 14 18 22 14 18 22 14 18 22 18 22 26 H 85 94 112 112 136 172 J 34 35 42 42 50 55,5 K USE 35 35 40 40 40 45 USU 36 42 42 42 50 50 L 95,3 109,5 127 127 127 127 M 56,5 60,5 54 54 69 69 N 91 107 126 126 164,4 165 SW 10 10 13 13 13 16 approx. kg 23 32 52 76 91 150 DIN 55029 with studs for camlock Size 710 800 Taper size 8 11 15 8 11 15 139,7 196,9 285,8 139,7 196,9 285,8 D 132,5 145 E 135 180 F 171,4 235 330,2 171,4 235 330,2 G 18 22 26 18 22 16 H 172 185 J 55,5 80 K USE 45 60 USU 68 68 L 210 210 M 69 91 N 202 240 SW 16 18 approx. kg 190 270 DIN 55026 mounting from front 1) Not for DIN 55021 or 1/2 inch 2) Not for 1/2 inch 3078

Jaw dimensions USE - USU Jaw dimensions USE - USU Reversible one-piece jaw E Size 260 310 400 450 500 630 710 800 85 94 112 136 172 185 35 35 40 40 45 60 64 66 80 88 108 130 D 10 10 10 10 12 14 E 12 12 14 14 14 18 F 27 30 36 42 52 55 G 29 32 38 46 60 65 H 14 15 19 23 26 30 approx. kg 0,8 0,9 1,6 2,25 3,5 4,2 ase jaw G Size 260 310 400 450 630 710 800 91 107 126 165 202 240 35 35 40 45 45 60 40,1 40,1 47,1 51,1 51,1 61,1 D 10 10 10 12 12 14 E 12 12 14 14 14 18 F 12,7 12,7 12,7 12,7 12,7 12,7 G 3,1 3,1 3,1 3,1 3,1 3,1 H 54 63,5 76,2 38,1 38,1 38,1 J M12 M12 M16 M20 M20 M20 K 7,6 7,6 10,8 10,8 10,8 10,8 L 21,2 24,4 27,5 27,5 27,5 27,5 M 19,03 19,03 19,03 19,03 19,03 19,03 N 38,7 46,6 56,1 56,1 56,1 56,1 Grooves 1 1 1 2 3 4 Tapped holes 2 2 2 4 5 6 approx. kg 0,8 0,9 1,1 1,4 2,2 2,8 Jaw dimensions USE - USU Reversible top jaw U and unstepped top jaw djusting spindle Size 260 310 400 450 500 630 710 800 26 26 30 30 34 34 40 83,5 99 129 167 200 200 240 14 14 16 16 28 28 33 D 13 15 16 16 20,5 20,5 24 E 13,5 15 18,5 18,5 21,5 21,5 24 F 45 55 78 116 143 143 172 G 12 14 16,5 16,5 13,5 13,5 20 H 14 14 16 16 20 20 22 SW 10 10 13 13 16 16 18 1) with outer hexagon hucking capacities of jaw steps (standard values) Size mm 260 310 400 450 500 630 710 800 1 min. 20 20 35 40 40 60 130 190 2 max. 260 295 400 450 500 585 690 800 l1 min. 75 80 90 100 145 145 145 170 l2 max. 260 310 400 450 520 650 730 820 max. swing. dia. 305 355 465 510 570 675 785 870 3079

UGE - UGU ast iron independent chucks PPLITION lamping chucks for lathes on which large, heavy or irregularly shaped workpieces are clamped. TYPE Independent four-jaw chuck in cast iron design. Jaws individually adjustable via threaded spindle (no central drive). Starting from size 400 with T-slots and set-up slots. USTOMER ENEFITS oncentric rings for visual rough centering, fine centering using dial gauge ast iron independent chucks UGE-UGU TEHNIL FETURES - ast iron design incl. clamping wrench and fastening screws, as well as 1 set of reversible or base and top jaws 26 ylindrical centre mount Size With one-piece reversible jaws With base jaws and top jaws Through-hole mm Speed max. min -1 160 1189704-45 2000 200 1189705 1189780 56 1800 250 1189706 1189781 65 1500 315 1189707 1189782 80 1200 400 1189708 1189783 100 800 500 1189709 1189784 125 500 26 ISO 702-3 (DIN 55027), DIN 55022, with studs and locknuts, optional DIN 55021 with set screw and nut Size Mount short taper With one-piece reversible jaws With reversible top jaws Through-hole mm Speed max. min -1 200 5 1189714 1189789 56 1800 200 6 1189715 1189790 56 1800 250 5 1189716 1189791 65 1500 250 6 1189717 1189792 65 1500 250 8 1189718 1189793 65 1500 315 5 1189719 1189794 80 1200 315 6 1189720 1189795 80 1200 315 8 1189721 1189796 80 1200 400 6 1189722 1189797 100 800 400 8 1189723 1189798 100 800 400 11 1189724 1189799 100 800 500 6 1189725 1189800 100 500 500 8 1189726 1189801 125 500 500 11 1189727 1189802 125 500 3080 on request

UGE - UGU ast iron independent chucks 26 ISO 702-2 (DIN 55029), S 5.9, Type D, with studs for amlock Size Mount short taper with one-piece reversible jaws with reversible top jaws Through-hole mm Speed max. min -1 Jaws UGE - UGU 200 4 1189733 1189812 56 1800 200 5 1189734 1189813 56 1800 200 6 1189735 1189943 56 1800 250 4 1189736 1189814 60 1500 250 5 1189737 1189815 65 1500 250 6 1189738 1189816 65 1500 250 8 1189739 1189817 65 1500 315 5 1189740 1189818 80 1200 315 6 1189741 1189819 80 1200 315 8 1189742 1189820 80 1200 400 6 1189743 1189821 100 800 400 8 1189744 1189822 100 800 400 11 1189745 1189823 100 800 500 8 1189746 1189824 125 500 500 11 1189747 1189825 125 500 ast iron independent chucks UGE-UGU 09 Reversible jaw E, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 1189865 160 set 61,5 51 20 1189866 200 set 85 61,5 27 1189867 250 set 92 61,5 27 1189868 315 set 111 76,5 40 1189871 400 set 129 76,5 40 1189872 500 set 152,5 93,5 52 09 ase jaw G with mounting bolts Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 1189895 200 set 79 32 27 1189896 250 set 94 38 27 1189897 315 set 110 39 40 1189898 400 set 129 44 40 1189899 500 set 168 59 52 09 Unstepped top jaw, soft Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 1189877 200 set 90 43,5 40 1189878 250 set 106 51,5 47 1189879 315 set 120 55 52 1189880 400 set 140 64,5 52 1189881 500 set 145 82 60 09 Reversible top jaws U, hardened Item no. huck Size ontents of delivery Jaw length Jaw height Jaw width 1189886 200 set 82 43,5 34 1189887 250 set 96,5 51,5 34 1189888 315 set 112,5 55 42 1189889 400 set 129 64,5 42 1189890 500 set 136 74,5 54 on request 3081

huck dimensions UGE - UGU huck dimensions UGE - UGU ylindrical centre mount Size 160 200 250 315 400 500 D G F E L H K 160 200 250 315 400 500 65 75 85 95 105 120 5 6 7 7 10 12 D H7 65 75 150 175 200 270 E 45 56 65 80 100 125 F 95 95 104,8 133,4 171,4 235 G 4xM10 4xM10 4xM12 4xM16 4xM16 4xM20 H 61,5 85 96,5 111 129 152,5 J 31,5 35 40,3 49,8 49,8 59,8 L - 46,4 60,4 60,9 72,3 90,3 K - 82 96,5 112,5 129 136 approx. kg 7,5 10 25 39 61 105 J huck dimensions UGE - UGU Short taper mount DIN 55027 with studs and locknuts D E Size 200 250 315 Taper size 4 5 6 4 5 6 8 5 6 8 75 75 75 85 85 85 85 95 95 95 D 63,5 82,5 106,3 63,5 82,5 106,3 139,7 82,5 106,3 139,7 E 56 56 56 60 65 65 65 80 80 80 F 85 1) 82,6 104,8 133,4 82,6 104,8 133,4 171,4 104,8 133,4 171,4 Mounting DIN 3 4 4-4 4 4 4 4 4 holes amlock 3 6 6 3 6 6 6 6 6 6 approx. kg 10 10 10 27,5 27,5 27,5 27,5 39,5 39,5 39,5 F Size 400 500 DIN 55029 with studs for camlock Taper size 6 8 11 6 8 11 105 105 105 120 120 120 D 106,3 139,7 196,8 106,3 139,7 196,8 E 100 100 100 100 125 125 F 133,4 171,4 235 133,4 171,4 235 Mounting DIN 4 4 6 4 4 6 holes amlock 6 6 6 6 6 6 approx. kg 60 60 60 95,5 95,5 95,5 F D E DIN 55026 mounting from front Size 200 250 315 400 Taper size 5 6 5 6 8 5 6 8 6 8 11 75 75 85 85 85 95 95 95 105 105 105 D 82,5 106,3 82,5 106,3 139,7 82,5 106,3 139,7 106,3 139,7 196,8 E 50 50 65 65 65 80 80 80 100 100 100 F 104,8 133,4 104,8 133,4 171,4 104,8 133,4 171,4 133,4 171,4 235 G 4xM10 4xM12 8xM10 4xM12 4xM16 4xM10 8xM12 4xM16 8xM12 4xM16 4xM20 approx. kg 17 17 25,5 25,5 25,5 40 40 40 65 65 65 D E F Size 500 G Taper size 6 8 11 120 120 120 D 106,3 139,7 196,8 E 100 125 125 F 133,4 171,4 235 G 4xM12 8xM16 8xM20 approx. kg 114 114 114 3082

Jaw dimensions UGE - UGU Jaw dimensions UGE - UGU Reversible one-piece jaw E H1 F H F T E D Size 160 200 250 315 400 500 61,5 85 92 111 129 152,5 20 27 27 40 40 52 51 61,5 61, 76,5 76,5 93,5 D 9 11,5 11,5 9,7 9,7 11,7 E 10 10 10 12 12 15 F 10 12 12 18 18 22 H1 20 30,5 30,5 27 32,5 35 H 41 58 65,5 67 78,5 93 Thread T 22x4 24x4 24x4 Tr32x6 Tr32x6 Tr36x6 ase jaw G L 3.2 F M J K K K G G H Size 200 250 315 400 500 79 94 110 129 168 27 27 40 40 52 32 38 39 44 59 D 11,5 11,5 9,7 9,7 11,7 E 10 10 12 12 15 F -0,03 7,94 12,7 12,7 12,7 12,7 G +0,01 12,69 19,04 19,04 19,04 19,04 H 33,2 37,5 45,4 54,9 55,5 J 4 4 4 7,2 7,2 K 22,25 27 31,75 38,1 38,1 L 14 20 17,5 22 33,5 M 3/8-16 1/2-13 1/2-13 5/8-11 3/4-10 Thread T 24x4 24x4 Tr32x6 Tr32x6 Tr36x6 D E huck dimensions UGE - UGU Unstepped soft top jaw J G F H E Size 200 250 315 400 500 90 106 120 140 145 40 47 52 52 60 43,5 51,5 55 64,5 82 D 7,95 12,71 12,71 12,71 12,71 E 24 27,5 30,7 34,4 34,4 F 44,5 54 63,5 76,2 76,2 G 12,69 19,04 19,04 19,04 19,04 H 40 45 53 63 63 J 4 4 4 4 4 Reversible top jaw U E N J K N G P H O Ø 200-800mm O L F Size 200 250 315 400 500 82 96,5 112,5 129 136 34 34 42 42 54 43,5 51,5 55 64,5 74,5 D 7,95 12,71 12,71 12,71 12,71 E 4 4 4 4 4 F -0,03 3,2 3,2 3,2 6,3 6,3 G +0,01 12,69 19,04 19,04 19,04 19,04 H 35,2 40 47,9 57,4 58 J 11 14 14 18 22 K 18 20 20 26 33 L 21,5 26,5 27,5 32 39,5 M 3/8-16 1/2-13 1/2-13 5/8-11 3/4-10 N 9,5 12 13 13,5 18 O 22 25 27 26,5 37,5 P 53 62 70,5 79 87 R 19,3 22,5 25,7 28,8 29,4 L N E D D J K G H Ø 1000-12500 mm M M R F hucking capacities of jaw steps (standard values) Size mm 160 200 250 315 400 500 1 min. 8 10 10 15 20 45 2 max. 160 200 250 315 400 500 max. swing. dia. 185 235 296 369 465 570 3083

MZMF Hybrid chuck MZMF Hybrid chuck Pole panel Filling piece Top jaw ase jaw Magnet body with jaw guides ctuating chuck over MZMF Hybrid chuck over ombined 2-jaw centering chuck with magnetic clamping plate precisely centered and deformation-free setup is of utmost importance, especially for easily deformable workpieces which require turning machining from all three sides within one working operation. Thanks to the combination of magnetic clamping force and deformation-free centering, workpieces, such as rings or other hard-to-grip parts having a wide range of sizes and contours, can be precisely clamped within seconds with the hybrid chuck MZMF. Technische Merkmale: Set-up times reduced by up to 50% Machine downtimes reduced to a minimum 3-side machining for turning and grinding parts 16 individually adjustable adhesion stages Uniform and deformation-free setup ombined magnetic and centering chuck clamping are possible High process reliability for rational series production Fast amortization 3084

Special solutions Other special solutions For special customer demands, RÖHM offers an individual range of special solutions, which goes far beyond the standard product range. From the smallest micro technology clamping chuck for watches and jewelry machining to impressive chucks with a diameter of over 5.5 meters and weight of 25 tons for rail vehicles or the energy sector. Other special solutions Machining of large bearings and rotary unions huck for turning machining onstant clamping force at high speeds by means of centrifugal force compensation Integrated quick-acting jaw change system for mini mum setup times Machining of large bearings and rotary unions huck for drilling machining entrically clamping wedge hook chuck Quickly adjustable clamping jaws and stops for minimum set-up times lamping chucks for rail traffic lamping diameters of up to 1.3 meters with flexible set-up for individually changing workpiece sizes utomated jaw adjustment for inner and outer machining Independent chucks for power plants and steel mills lamping diameter of up to 5 meters Safe clamping using power spindles allows up to 50 tons of clamping force per jaw For further informations of our special solutions in any areas visit our homepage: http://www.roehm.biz/downloads/ 3085

F-senso chuck clamping force measuring device F-senso chuck clamping force measuring device F-senso chuck With F-senso chuck, check both the clamping force as well as the speed behavior of the clamping device Maximum flexibility through large clamping range from 75-175 mm by means of exchangeable pressure bolts and large measuring range from 0-100 kn per jaw. Suitable for 3-jaw chuck as well as vices. Dynamic clamping force measurement under rotation up to 8250 rpm. For clamping chucks, both the clamping force as well as the speed are measured. The centrifugal force behavior is transferred to the Tablet (included in delivery) in real time via lue-tooth and is evaluated with the already-installed software. Video F-senso chuck DVNTGES T GLNE Direct output of the centrifugal force behavior through combined measurement of clamping force and speed Flexibility through large clamping and measuring range Easy handling without additional set-ups on the machine Included in the scope of delivery: - ase with foam insert - lamping force measuring head, F-senso chuck - Pressure bolts in lengths 5 mm, 15 mm, 25 mm and 30 mm - Pressure bolt elongation in length 25 mm - Practical insertion aid - Tablet P with pre-installed measuring and evaluation program 15 lamping force measurement device F-senso chuck Item no. 179800 Measuring range / lamping force kn 2 jaws: 0-200; 3 jaws: 0-300 Measuring range / Rotation speed min-1 0-8250 ccuracy Force <0.5% / Rotation speed ±10 rpm within the complete measuring range lamping Ø mm 75-175 Dimensions (base unit) Ø 75/80 x 130 3086

Power-Grip zero-point clamping system Power-Grip zero-point clamping system Palletizing systems, such as the Power-Grip zero-point clamping system from RÖHM, achieve a drastic increase in production. This modular system meets the demands for customized solutions with the best possible utilization of the machine capacity. While the machine tool was stopped for the time of the set-up operation before, now the workpiece can be clamped and positioned on the pallet outside of the machine tool. The set-up time is now only limited to the changing in and out of the pallet within a few seconds.if several production processes are necessary for machining, the pallet can be used along with the workpiece without a zero-point loss. Due to the sturdy and rust-resistant design, the Power- Grip zero-point clamping system is universally suitable for applications ranging from cutting machining to electrical discharge machining all the way to measuring machines. Power-Grip DVNTGES T GLNE Increase in productivity thanks to set-up time reduction up to 90 % Maximum precision and repeatability of 0.002 mm Palletizing and clamping device from one source SET-UP TIME REDUTION Y UP TO 90 % Without palletizing system Machine run-time Setting up the workpiece With Power-Grip zero-point clamping system Simultaneous set-up on the pallet Machine run-time dditional machine capacity Pallet change 3087

Orange Line Success with standard products ORNGE LINE

Orange Line - Success with standard products s a specialist in clamping technology RÖHM has been developing and producing all the chucking tools needed by its customers for more than 100 years. Drill hucks With the new Orange Line RÖHM now offers favourable products at proven RÖHM quality. In future the customer will benefit from faster processes in ordering and service. The Orange Line includes the product groups drill chucks, live centers, lathe chucks and vices. It offers one product per product group in the most common sizes. Variants and special functions have been excluded. The Orange Line offers many valuable advantages: Live enters Standard products with proven characteristics Long life Heavy duty Various fields of application Fast delivery Fast repair and service performance Very good price performance ratio Geared Scroll hucks Our wide product range with clamping tools for each application area can be found in our main catalogue or at www.roehm.biz. Vices ORNGE LINE

Drill hucks With our keyless drill chucks EXTR RV-E and the key-type drill chucks PRIM-L you are perfectly prepared for any kind of application. Keyless clamping by turning the sleeve Suitable for Percussion drilling Drilling in steel and wood Screwing Metal and plastic sleeve design With through-hole for clockwise and anti-clockwise rotation With retaining ring for machines without spindle stop Extra-RV-E with radial locking Item no. Size lamping capacity Mount Retaining ring External Ø Length opened Length closed Throughhole Sleeve 1261215 10 1-10 1/2-20 42,7 50,2 60 plastic 1261216 10 1-10 1/2-20 42,7 50,2 60 plastic 1261217 10 1-10 3/8-24 42,7 50,2 60 plastic 1261211 13 1,5-13 1/2-20 42,7 57 67,5 metal 1261212 13 1,5-13 1/2-20 42,7 57 67,5 metal 1261213 13 1,5-13 1/2-20 42,7 57 67,5 plastic 1261214 13 1,5-13 1/2-20 42,7 57 67,5 plastic M keyless metal sleeve plastic sleeve percussion drilling Suitable for Percussion drilling Drilling in steel and wood Screwing With through-hole for clockwise and anti-clockwise rotation Toothing according to DIN 6349 Prima-L Item no. Size lamping capacity Mount External Ø Length opened Length closed Key size Through-hole 1261225 10 1-10 1/2-20 33,5 49,5 61,5 S2 1261226 10 1-10 3/8-24 33,5 49,5 61,5 S2 1261227 13 1,5-13 1/2-20 42,5 59 74,5 S2 1261228 13 1,5-13 3/8-24 42,5 59 74,5 S2 with key M metal sleeve percussion drilling www.roehm.biz

Revolving Tailstock enters The revolving tailstock centers of the Orange Line meet all basic requirements of turning machining at best price performance ratio. vailable in the versions MT 3, MT 4 und MT 5. Further tailstock centers for different applications can be found in our main catalogue. High runout accuracy Triple bearing method enter hardened, repeated regrinding at will Long life due to: Splash water groove Improved life-time lubrication lose toleranced bearing seat Lower interference shape due to slim housing 630 500 400 315 250 Workpiece weight in kg 200 160 125 100 80 63 MK5 K35 MK4 K34 MK3 K33 50 40 31 25 20 25 35 45 70 100 130 190 270 350 500 800 1000 1500 2200 3000 4000 6000 8500 min -1 1000 800 630 500 400 315 xial load in dan 250 200 160 125 100 MK5 K35 MK4 K34 80 63 50 40 25 35 45 70 100 130 190 270 350 500 800 1000 1500 2200 3000 4000 6000 8500 MK3 K33 min -1 Revolving tailstock center ody hardened and ground - tip angle 60 Item no. 1267217 1267218 1267219 Mount MT 3 4 5 Size K33 K34 K35 82,5 101,5 128 55 68,5 88,5 D 25 32 40 G 23,825 31,267 44,399 K 30,3 39,8 49,3 Weight approx. g 1000 1800 4300 Workpiece weight max. kg 300 500 630 oncentricity deviation 0,005 0,005 0,005 Speed max. min -1 8500 6000 4500 Spare live centers 1243613 1241722 1241721 ORNGE LINE

Geared Scroll huck ZG In the area of manual lathe chucks the Orange Line offers the geared scroll chuck ZG as favourable alternative to the proven steel version ZS. The ZG is available with high value cast iron body and one-piece jaws in 5 sizes as a 3-jaw version and in 5 sizes as a 4-jaw version. Suitable adapter flanges and additional lathe chucks can be found in the main catalogue. Self-centering Jaws can be moved across the entire clamping range. Due to this, workpieces with different diameters can be clamped without changing or shifting the jaws. Vibration isolation body made of iron cast Scroll drop-forged, balanced, hardened With one set of outward stepped jaws and one set of inward stepped jaws Lathe chuck with scroll ZG DIN 6350 - ylindrical centre mount, form Size Z Through-hole 3-jaw chuck with outward and inward stepped jaws 4-jaw chuck with outward and inward stepped jaws Speed max. Torque Nm Total clamping min -1 force kn 100 70 20 101781 102129 4500 60 27 125 95 32 101628 106074 4000 80 31 160 125 42 100300 100325 3600 110 47 200 160 55 100000 100465 3000 140 55 250 200 76 100200 100834 2500 150 63 315 260 103 101248 101567 2000 180 69 ylindrical center mount DIN 6350 Size 100 125 160 200 250 315 H6 70 95 125 160 200 260 3 4 4 4 5 5 D 50 56 65 73,5 82 95 E 20 32 42 55 76 103 F 83 108 140 176 224 286 G 3xM8 3xM8 3xM10 3xM10 3xM12 3xM16 H 48 52 61 69 90 130 J 18 22,5 26 32,5 40 46 K 8 9 10 11 12 14 approx. kg 2,9 4,5 8,2 14,6 25,7 44,2 Suitable clamping jaws can be found in our clamping jaw catalogue as well as our clamping jaw finder at www.spannbacken.biz. 3-jaw chuck inside jaw/outside jaw side machining pipe disc rotating 4-jaw chuck selfcentering length machining bar flange stationary www.jawfinder.biz www.roehm.biz

Vices R-M The vices R-M are operated completely mechanically via a threaded spindle. Defined clamping force initiation is possible by the means of a torque wrench and the suitable adapter. The new machine vices R-M are being released in a new design especially for the Orange Line. Mechanically operated via threaded spindle High precision due to precise jaw guides Rapid clamping range adjustment via locking pin The new design enables a better coolant and chip flow High wear resistance due to hardened jaw guides an be used on a rotation plate with angular spacing Ground area with longitudinal groove for accurate fixing on machine table lamping option with clamps Enclosed spindle only size 5 R-M With SGN normal jaws and hand crank Item no. 179080 179081 179082 179083 179084 R-M (mechanical) Size 1 2 3 4 5 Jaw width 92 113 135 160 200 lamping capacity 0-100 0-185 0-240 0-330 0-370 31,6 31,6 39,6 49,6 66,6 D max 420 586 686 860 1015 E 91 97 112 133 171 F 310 390 468 574 685 G±0,02 59 65,5 72,5 83,5 104,5 H 50 55 70 80 90 J 218 236,5 262 298 375 K 160 160 200 240 280 O 115 160 180 220 230 P 90 90 90 90 160 Q 13 13 13 17 21 S 100 100 135 180 180 Y 12 12 16 16 20 a 63 63 80 100 140 b 13,6 13,6 15,6 19,6 23 c M6 M6 M8 M8 M10 d 12 12 13 13 16 lamping force kn 20 25 35 45 55 Weight kg 15,5 24 39 60 112 dapter for 1/2 torque wrench 168721 161103 162192 161730 161730 ORNGE LINE

Vices R-K (power intensification) The vices R-K are operated mechanically with power intensification. The new machine vices are being released in a new design especially for the Orange Line. Stepwise clamping force presetting lamping without power intensification for deformationsensitive workpieces possible High precision due to precise jaw guides Rapid clamping range adjustment via locking pin The new design enables a better coolant and chip flow High wear resistance due to hardened jaw guides an be used on a rotation plate with angular spacing Ground area with longitudinal groove for accurate fixing on machine table lamping option with clamps Enclosed spindle only size 5 R-K With SGN normal jaws and hand crank Item no. 179075 179076 179077 179078 179079 R-K (power intensification) Size 1 2 3 4 5 Jaw width 92 113 135 160 200 lamping capacity 0-100 0-170 0-220 0-310 0-350 31,6 31,6 39,6 49,6 66,6 D max 490 583 679 817 1022 E 91 97 112 133 171 F 310 390 468 574 685 G±0,02 59 65,5 72,5 83,5 104,5 H 50 55 70 80 90 J 218 236,5 262 298 375 K 160 160 200 240 280 O 115 160 180 220 230 P 90 90 90 90 160 Q 13 13 13 17 21 S 100 100 135 180 180 Y 12 12 16 16 20 a 63 63 80 100 140 b 13,6 13,6 15,6 19,6 23 c M6 M6 M8 M8 M10 d 12 12 13 13 16 lamping force kn 25 30 40 50 100 Weight kg 15,5 24 39 60 112 www.roehm.biz

lamping jaws catalogue www.jawfinder.biz

DRILL HUKS - N-TOOLING LIVE ENTERS - FE DRIVERS LTHE HUKS - INDEPENDENT HUKS VIES UTOMTION TEHNOLOGY POWER HUKS - YLINDERS - STEDY RESTS MNDRELS TOOL LMPING SYSTEMS www.roehm.biz

Table of contents RÖHM SMW-utoblok Soft top jaws, serration 90 4 Soft top jaws, without mounting holes, serration 90 5 Soft top jaws, serration 60 6 Soft top jaws, tongue and groove, 120 bevelled 8 Soft top jaws, tongue and groove, for key bar chucks 9 Reversible top jaws, hardened, serration 90 10 Reversible top jaws, hardened, serration 60 11 Reversible top jaws, hardened, tongue and groove 13 ase jaws G, hardened, diagonally toothing 14 Soft one-piece jaws L, diagonally toothing 15 One-piece reversible jaws E, hardened, diagonally toothing 16 Draw-down jaws N, diagonally toothing 17 Interchangeable clamping inserts 17 ase jaws GG, hardened, straight toothing 19 Soft one-piece jaws LG, straight toothing 20 One-piece reversible jaws EG, hardened, straight toothing 21 Draw-down jaws NG, straight toothing 22 Interchangeable clamping inserts 22 law-type jaws, hardened, serration 90 24 law-type jaws, hardened, serration 60 28 law-type jaws, hardened, tongue and groove 29 Soft segment top jaws, serration 90 30 Soft segment top jaws, serration 60 31 T-nuts for power chucks and stationary power chucks 32 Mounting bolts for top jaws 34 Outward stepped jaw, hardened 36 Inward stepped jaws D, hardened 37 Unstepped jaws L, can be hardened 38 ase jaws G, hardened 39 Reversible top jaws U, hardened 40 Soft top jaws 41 lock jaws in extended design 42 lock jaws in heightened design 43 Soft top jaws in extended design 44 Soft top in heightened design 45 Soft top in heightened and wide design 46 Reversible top jaws U, hardened for EG-ES 47 Unstepped jaws L, can be hardened for EG-ES 48 ase jaws G, hardened for EG-ES 49 Schunk Soft top jaws, serration 90 52 Soft top jaws, without mounting holes, serration 90 53 Soft top jaws, serration 60 54 Soft top jaws, tongue and groove, 120 bevelled 56 Soft top jaws, tongue and groove, for key bar chucks 57 Reversible top jaws, hardened, serration 60 58 Reversible top jaws, hardened, tongue and groove 59 ase jaws G, hardened, diagonally toothing 60 Soft one-piece jaws L, diagonally toothing 61 One-piece reversible jaws E, hardened, diagonally toothing 62 Draw-down jaws N, diagonally toothing 63 ase jaws GG, hardened, straight toothing 65 Soft one-piece jaws LG, straight toothing 66 One-piece reversible jaws EG, hardened, straight toothing 67 Draw-down jaws NG, straight toothing 68 law-type jaws, hardened, serration 90 70 law-type jaws, hardened, serration 60 71 law-type jaws, hardened, tongue and groove 72 Soft segment top jaws, serration 60 73 Soft top jaws, serration 90 76 Soft top jaws, without mounting holes, serration 90 77 Soft top jaws, serration 60 78 Soft top jaws, tongue and groove, for key bar chucks 80 Reversible top jaws, hardened, serration 90 81 Reversible top jaws, hardened, serration 60 82 Reversible top jaws, hardened, tongue and groove 84 ase jaws G, hardened, diagonally toothing 85 Soft one-piece jaws L, diagonally toothing 86 One-piece reversible jaws E, hardened, diagonally toothing 87 Draw-down jaws N, diagonally toothing 88 ase jaws G, hardened, diagonally toothing 90 Soft one-piece jaws LG, straight toothing 91 One-piece reversible jaws EG, hardened, straight toothing 92 Draw-down jaws NG, straight toothing 93 law-type jaws, hardened, serration 90 95 law-type jaws, hardened, serration 60 96 law-type jaws, hardened, tongue and groove 97 Forkardt Soft top jaws, serration 90 100 Soft top jaws, without mounting holes, serration 90 101 Soft top jaws, tongue and groove, 120 bevelled 102 Soft top jaws, tongue and groove, for key bar chucks 103 Reversible top jaws, hardened, serration 90 104 Reversible top jaws, hardened, tongue and groove 105 ase jaws G, hardened, diagonally toothing 106 Soft one-piece jaws L, diagonally toothing 107 One-piece reversible jaws E, hardened, diagonally toothing 108 Draw-down jaws N, diagonally toothing 109 law-type jaws, hardened, serration 90 111 law-type jaws, hardened, tongue and groove 112 Soft segment top jaws, serration 90 113 ison Soft top jaws, serration 90 116 Soft top jaws, without mounting holes, serration 90 117 Soft top jaws, serration 60 118 Soft top jaws, tongue and groove, 120 bevelled 119 Reversible top jaws, hardened, serration 90 120 Reversible top jaws, hardened, serration 60 121 law-type jaws, hardened, serration 90 122 law-type jaws, hardened, serration 60 123 Kitagawa Soft top jaws, serration 60 126 Reversible top jaws, hardened, serration 60 127 law-type jaws, hardened, serration 60 128 Soft segment top jaws, serration 60 129 RÖHM ccessories Jaw cutting attachment V, for 3-jaw chucks 132 hecklist for special jaws 134 Find your clamping jaw quickly and simply at www.jawfinder.biz

The comprehensive clamping jaw program offers a large number of the most diverse jaw types for all clamping options. Suitable for manual lathe chucks, independent chucks and power chucks from different manufacturers both in industrial and artisan production. Find your clamping jaw quickly and simply at www.jawfinder.biz

RÖHM Soft top jaws, serration 90 4 Soft top jaws, without mounting holes, serration 90 5 Soft top jaws, serration 60 6 Soft top jaws, tongue and groove, 120 bevelled 8 Soft top jaws, tongue and groove, for key bar chucks 9 Reversible top jaws, hardened, serration 90 10 Reversible top jaws, hardened, serration 60 11 Reversible top jaws, hardened, tongue and groove 13 ase jaws G, hardened, diagonally toothing 14 Soft one-piece jaws L, diagonally toothing 15 One-piece reversible jaws E, hardened, diagonally toothing 16 Draw-down jaws N, diagonally toothing 17 Interchangeable clamping inserts 17 ase jaws GG, hardened, straight toothing 19 Soft one-piece jaws LG, straight toothing 20 One-piece reversible jaws EG, hardened, straight toothing 21 Draw-down jaws NG, straight toothing 22 Interchangeable clamping inserts 22 law-type jaws, hardened, serration 90 24 law-type jaws, hardened, serration 60 28 law-type jaws, hardened, tongue and groove 29 Soft segment top jaws, serration 90 30 Soft segment top jaws, serration 60 31 T-nuts for power chucks and stationary power chucks 32 Mounting bolts for top jaws 34 lamping jaws for geared scroll chucks Outward stepped jaw (inside jaw), hardened 36 Inward stepped jaws (outside jaws) D, hardened 37 Unstepped jaws (soft block jaws) L, can be hardened 38 ase jaws G, hardened 39 Reversible top jaws U, hardened 40 Soft top jaws 41 lock jaws in extended design 42 lock jaws in heightened design 43 Top jaws in extended design, can be hardened 44 Top jaws in heightened design, can be hardened 45 Top jaws in heightened and wide design, can be hardened 46 Reversible top jaws U, hardened for EG-ES 47 Unstepped jaws L, can be hardened for EG-ES 48 ase jaws G, hardened for EG-ES 49 Errors and corrections are reserved!

Soft top jaws, serration 90 RÖHM RÖHM G F D +0,05 G G F 30 o Q p 537-02 = 3 mm Tool group 21 Type 543/538 Soft top jaws, set, can be hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G Q Serration Weight approx. kg KFD-HS 110/3 149690 149353-45 26,5 38 10 15 15 5 1/16 x 90 0,21 KFD 110/3; KFD 125/3; KFD 140/3; 045794 046402 046450 53 22,5 30 10 20 12 3 1/16 x 90 0,223 KFD-HS 130/3; KFD-HS 140/3 KFD-HE 130/3-156452 - 54 23 29 10 28 14 5 1/16 x 90 0,22 KFD 130/3; KFD-HE 170/3; KFD-HS 160/3; KFD-HS 175/3; LVE 125/3; LVE 160/3; SSH 160/3; SSP 160/3 DURO-NG 200/3; DURO-NSE- 210/3; KFD 160/3; KFD-F 160/3; KFD-HS 200/3 KFD 200/3; KFD 250/3; KFD-F 200/3; KFD-E 200/3; KFD-F-E 200/3; KFD-HE 210/3; KFD-HS 250/3; KFL 250/3; LVE 200/3; SSH 200/3; SSP 200/3 KFD-F 200/3; LVE 200/3; SSP 200/3 045795 046403 046451 55 26,5 38 12 31 15-1/16 x 90 0,32 133147 133152 133157 66,7 36,5 53 17 36 19-1/16 x 90 0,7 133148 133153 133158 75 36,5 53 17 44 19-1/16 x 90 0,88-461712 - 75 36,5 65 17 44 19-1/16 x90 3,4-585021 - 90 36,5 40 17 47 23 5 1/16 x90 2,7-894365 - 90 40 60 17 43 22 5 1/16 x90 4,2-894357 - 98 35 40 17 61 22-1/16 x90 2,9 DURO-NG 250/3; DURO-NG 315/3; 133149 133154 133159 95 45 54,5 21 55 25-1/16 x 90 1,4 DURO-NSE- 265/3; DURO-NSE- 315/3; KFD 250/3; KFD-F 250/3; KFD-E 250/3; KFD-F-E 250/3; KFD-HE 254/3; KFD-HE 315/3; KFD-HS 315/3; KFL 315/3; LVE 250/3; LVE 315/3; SSH 250/3; SSH 315/3; SSP 250/3; SSP 315/3 KFD-F 250/3; KFD-F 315/3-585531 - 110 50 55,5 21 60 30-1/16 x90 6,3 KFD 315/3; KFD-F 315/3; 133150 133155 133160 103 50 80 21 62 25-1/16 x 90 2,58 KFD-E 315/3; KFD-F-E 315/3; KFL 400/3 KFD-F 250/3; KFD-F 315/3-894366 - 120 50 80 21 62 28-1/16 x90 8,9 DURO-NG 400/3; DURO-NG 500/3; 133151 133156 133161 130 50 80 25,5 79 31-3/32 x 90 3,1 DURO-NG 630/3; DURO-NSE- 400/3; DURO-NSE- 500/3; DURO-NSE- 630/3; KFD 400/3; KFD 500/3; KFD 630/3; KFD 800/3; KFD-E 400/3; KFD-F-E 400/3; KFD-HE 400/3; KFD-HS 400/3; KFD-HS 500/3; KFL 500/3; KFL 600/3; LVE 400/3; LVE 500/3; LVE 600/3 LVE 400/3; LVE 500/3; LVE 600/3-118004 - 130 50 80 25,5 20 35-3/32 x90 3,1 KFD 1000/3; KFD 1250/3; KFD 1400/3; - 152790 461716 200 80 89 30 94 42 - m=2 8,5 KFD 1600/3 LVE 600/3; LVE 700/3-169450 - 215 68 89 30 25 45+45-3/32 x90 7,8 LVE 1000/3; LVE 600/3; LVE 700/3; LVE 800/3-169452 - 245 68 89 30 25 45+45-3/32 x90 9,1 4 within 4 weeks

Soft top jaws, without mounting holes, serration 90 RÖHM RÖHM Tool group 21 Type 543-28 Soft top jaws, piece, without mounting holes, can be hardened, serration 90 - material: 16 Mnr 5 huck Type Item no. Jaw length Jaw width Jaw height D Serration Weight approx. kg KFD 110/3; KFD 125/2; KFD 125/3; KFD 130/3; 883005 52 26,5 38 10 1/16 x90 0,4 KFD 140/2; KFD-HE 130/3; KFD-HS 110/3; KFD-HS 130/3; KFD-HS 140/3 KFD 130/2; KFD 130/3; KFD-HE 170/3; 631327 55 26,5 38 12 1/16 x90 0,4 KFD-HS 160/2; KFD-HS 160/3; KFD-HS 160/4; KFD-HS 175/3; LVE 125/3; LVE 160/3; SSH 160/2; SSH 160/3; SSP 160/2; SSP 160/3 KFD 160/2; KFD 160/3; KFD 160/4; KFD-F 160/3; KFD-HE 210/3; KFD-HS 200/2; KFD-HS 200/3; KFD-HS 200/4; LVE 200/3 667392 90 36,5 53 17 1/16 x90 1,3 KFD 160/2; KFD 160/3; KFD 160/4; KFD 200/2; 155423 105 36,5 53 17 1/16 x90 1,5 KFD 200/3; KFD 200/4; KFD-F 160/3; KFD-F 200/3; KFD-E 200/3; KFD-HE 210/3; 681620 KFD-HS 200/2; KFD-HS 200/3; KFD-HS 200/4; 120 36,5 53 17 1/16 x90 1,7 KFD-HS 250/2; KFD-HS 250/3; KFD-HS 250/4; KFL 250/3; LVE 200/3; SSH 200/2; SSH 200/3; SSP 200/2; SSP 200/3 KFD 160/2; KFD 160/3; KFD 160/4; KFD-F 160/3; KFD-HE 210/3; KFD-HS 200/2; KFD-HS 200/3; KFD-HS 200/4; LVE 200/3 155424 90 45 54,5 17 1/16 x90 1,7 KFD 160/2; KFD 160/3; KFD 160/4; KFD 200/2; 155425 105 45 54,5 17 1/16 x90 2 KFD 200/3; KFD 200/4; KFD-F 160/3; KFD-F 200/3; KFD-E 200/3; KFD-HE 210/3; KFD-HS 200/2; KFD-HS 200/3; KFD-HS 200/4; KFD-HS 250/2; KFD-HS 250/3; KFD-HS 250/4; KFL 250/3; LVE 200/3; SSH 200/2; SSH 200/3; SSP 200/2; SSP 200/3 KFD 200/2; KFD 200/3; KFD 200/4; KFD-F 200/3; KFD-E 200/3; KFD-HE 210/3; 155426 120 45 54,5 17 1/16 x90 2,2 KFD-HS 250/2; KFD-HS 250/3; KFD-HS 250/4; 155427 KFL 250/3; LVE 200/3; SSH 200/2; SSH 200/3; 90 50 80 17 1/16 x90 2,6 SSP 200/2; SSP 200/3 KFD 250/2; KFD 250/3; KFD 250/4; KFD 315/2; 155428 120 45 54,5 21 1/16 x90 2,2 KFD 315/3; KFD 315/4; KFD-F 250/3; KFD-F 315/3; KFD-E 250/3; KFD-E 315/3; KFD-G 200/2; KFD-HE 254/3; KFD-HE 315/3; KFD-HS 315/2; KFD-HS 315/3; KFL 315/3; KFL 400/3; LVE 250/3; LVE 315/3; SSH 250/2; SSH 250/3; SSH 315/2; SSH 315/3; SSP 250/2; SSP 250/3; SSP 315/3 KFD 250/2; KFD 250/3; KFD 250/4; KFD 315/2; 155429 150 45 54,5 21 1/16 x90 2,7 KFD 315/3; KFD 315/4; KFD-F 250/3; KFD-F 315/3; KFD-E 250/3; KFD-E 315/3; KFD-G 200/2; KFD-HE 254/3; KFD-HE 315/3; 667208 120 50 80 21 1/16 x90 3,5 KFD-HS 315/2; KFD-HS 315/3; KFL 315/3; KFL 400/3; LVE 250/3; LVE 315/3; SSH 250/2; SSH 250/3; SSH 315/2; SSH 315/3; SSP 250/2; SSP 250/3; SSP 315/2; SSP 315/3 155430 150 50 80 21 1/16 x90 4,4 KFD 400/2; KFD 400/3; KFD 400/4; KFD 500/2; 155431 155 50 80 25,5 1/16 x90 4,4 KFD 500/3; KFD 500/4; KFD 630/2; KFD 630/3; KFD 630/4; KFD 800/3; KFD 800/4; KFD-G 250/2; KFD-G 315/2; KFD-G 400/2; 155432 155 68 89 25,5 1/16 x90 7 KFD-HE 400/3; KFD-HS 400/3; KFD-HS 500/3; KFL 500/3; KFL 600/3; LVE 400/3; LVE 500/3; LVE 600/3 155433 155 68 89 25,5 1/16 x90 8,7 within 4 weeks 5

Soft top jaws, serration 60 RÖHM RÖHM G F 4,5 D H7 Tool group 21 Type 543-32 Soft top jaws, 3-jaw set, can be hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G Serration Weight approx. kg KFD-HE 130/3; 154863 54 23 29 10 28 14 1,5 x 60 0,25 KFD-HE 170/3 KFD-HE 170/3 154865 72 30,5 43 12 37 20 1,5 x 60 0,5 KFD-HE 210/3 154867 95 35 45,5 14 46 25 1,5 x 60 0,9 159780 95 35 45,5 17 46 25 1,5 x 60 2,7 KFD-HE 254/3 154869 110 50 45 16 50 30 1,5 x 60 1,7 KFD-HE 315/3 154871 130 50 55,5 21 52 30 1,5 x 60 1,9 6 within 4 weeks

Soft top jaws, serration 60 RÖHM RÖHM F G D +0,05 G F M D +0,05 Tool group 21 Type 530 Soft top jaws, set, can be hardened, serration 60 - material: 16 Mnr 5 30 o huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg KFM 130/3 045797 046405 53 26,5 38 11 29 15-1,5 x 60 0,32 KFG 160/3-351102 1) 66,7 30,5 43 11 - - 27 1,5x60 1,6 KFE 170/3; KFG 160/3; KFM 160/3 046430 046409 66,7 30,5 43 11 30 20 27 1,5 x 60 0,55 KFE 215/3; KFG 215/3; KFM 215/3 046432 046411 88,9 36,5 53 14 45 26 34 1,5 x 60 1,125 KFE 280/3; KFG 280/3; KFM 280/3 046436 046415 88,9 45 54,5 20 45 26-1,5 x 60 1,4 KFE 350/3; KFG 350/3; KFM 350/3 046442 046421 120 50 80 21 67 28-1,5 x 60 3,125 1) without mounting holes within 4 weeks 7

RÖHM Soft top jaws, tongue and groove, 120 bevelled RÖHM 538-00 M +0,03 Q 538-12 D 0,03 G 30 o Tool group 21 Type 549/538 Soft top jaws, set, can be hardened, tongue and groove 120 bevelled, material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Q Weight approx. kg KFD 85/3 119458 119459 40 22,5 30 8 29-8 3 0,146 KFD 110/3; KFD 125/3 046860 046859 51 22,5 30 8 29,5 15 8 3 0,2 KFD-HS 110/3-144082 53 22,5 30 10 26,5 17 10 3 0,21 KFD 130/3; KFD 140/3; KFD-HS 140/3 123356 123355 58 26,5 38 13 31,5-8 3 0,31 KFD 160/3; KFD-HS 160/3 123359 123358 72,7 36,5 53 10 32,2 25 16 3 0,72 KFD 200/3; KFD-E 200/3; KFD-F-E 200/3; KFD-HS 200/3; KFD-N 220/3 KFD 250/3; KFD-E 250/3; KFD-F-E 250/3; KFD-F-E 315/3; KFD-HS 250/3; KFD-N 280/3 KFD 315/3; KFD-E 315/3; KFD-F-E 315/3; KFD-F-E 400/3; KFD-N 350/3 123431 123430 90,3 36,5 53 12 45,3 30 16 6 1 123434 123433 115,3 45 54,5 20 58,3 40 16 6 1,55 129847 129849 146 50 80 20 63,5 50 16 6 3,6 8 within 4 weeks

RÖHM Unstepped soft top jaws, tongue and groove, for key bar chucks RÖHM Tool group 28 Type 002 Unstepped soft top jaw, 3-jaw set, standard design, material 16Mnr5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G H K DURO-T 125/3 212123 55 20,7 31,3 14 25,5 25 5 20 DURO 160/3; DURO-N 140/3; DURO-N 175/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-T 160/3 DURO 160/3; DURO-N 140/3; DURO-N 175/3; DURO-T 160/3 DURO 200/3; DURO-N 200/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 200/3 DURO 200/3; DURO-N 200/3; DURO-T 200/3 DURO 250/3; DURO 250/3; DURO-N 250/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-T 250/3; DURO-T 250/3 DURO 250/3; DURO-N 250/3; DURO-T 250/3 DURO 315/3; DURO-N 315/3; DURO-NSE 400/3; DURO-T 315/3 DURO 315/3; DURO-N 315/3; DURO-T 315/3 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-NSE 500/3; DURO-NSE 630/3; DURO-T 400/3; DURO-T 500/3 DURO 630/3; DURO-N 630/3; DURO-T 630/3 1) extended design 094008 85 20,3 41 8 36,5 42 18 32 137055 1) 85 24,4 47 8 42,5 42 18 32 094009 105 22 45 10 40 50 20 40 137056 1) 105 34,3 56 10 51 50 20 40 094010 125 30,4 55 12 50 70 20 40 137057 1) 125 50,5 80 12 75 70 20 40 094011 145 34,3 56 12 50 74 26 54 137058 1) 145 50,5 80 12 74 74 26 54 094046 180 50,5 80 18 73 100 30 60 140716 260 68 110 24 102 150 40 82 within 4 weeks 9

RÖHM Reversible top jaws, hardened, serration 90 RÖHM G G F D H7 M Tool group 21 Type 543/538 Reversible top jaws, set, hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg KFD-HS 110/3 149490 149352 155395 45 26 32 10 15 15 7 1/16 x 90 0,155 KFD 110/3; KFD 125/3; KFD 140/3; 046545 046544 046546 56 26 37,5 10 10 12 10 1/16 x 90 0,13 KFD-HS 130/3; KFD-HS 140/3 KFD-HE 130/3-156446 - 54 23 27,5 10 13 14 10 1/16 x 90 0,11 KFD 130/3; KFD-HE 170/3; KFD-HS 160/3; KFD-HS 175/3; LVE 125/3; LVE 160/3; SSH 160/3; SSP 160/3-351320 - 51,5 26 26 12 13,5 15 8 1/16 x 90 0,15 045796 046404 046452 56 26 37,5 12 14 15 10 1/16 x 90 0,17 DURO-NG 200/3; DURO-NSE- 210/3; 046429 046408 046456 68 34,7 45 17 17 19 10 1/16 x 90 0,35 KFD 160/3; KFD 200/3; KFD-F 160/3; KFD-F 200/3; KFD-E 200/3; KFD-F-E 200/3; KFD-HS 200/3; KFD-HS 250/3; KFL 250/3; LVE 200/3; SSH 200/3; SSP 200/3 DURO-NSE- 210/3; 118521 118522 118523 75 36 49 17 21,5 19 12 1/16 x 90 0,46 KFD 160/3; KFD 200/3; KFD 250/3; KFD-F 160/3; KFD-F 200/3; KFD-E 200/3; KFD-F-E 200/3; KFD-HE 210/3; KFD-HS 200/3; KFD-HS 250/3; KFL 250/3; LVE 200/3; SSH 200/3; SSP 200/3 DURO-NSE- 210/3; KFD 160/3; - 609592-80 36 37 17 41 19 12 1/16 x 90 0,235 KFD 200/3; KFD-F 160/3; KFD-F 200/3; KFD-E 200/3; KFD-F-E 200/3; KFD-HS 200/3; KFD-HS 250/3; KFL 250/3; LVE 200/3; SSH 200/3; SSP 200/3 DURO-NSE- 210/3; KFD 160/3; - 585022-81 40 49 17 19 23 12 1/16 x90 1,5 KFD 200/3; KFD-F 160/3; KFD-F 200/3; KFD-E 200/3; KFD-F-E 200/3; KFD-HS 200/3; KFD-HS 250/3; KFL 250/3; SSH 200/3; SSP 200/3 DURO-NG 250/3; DURO-NG 315/3; 046435 046414 046462 103,5 50 58 21 33,5 25 14 1/16 x 90 1,13 DURO-NSE- 265/3; DURO-NSE- 315/3; KFD 250/3; KFD 315/3; KFD 315/4; KFD-F 250/3; KFD-F 315/3; KFD-E 250/3; KFD-E 315/3; KFD-F-E 250/3; KFD-F-E 315/3; KFD-HE 254/3; KFD-HE 315/3; KFD-HS 315/3; KFL 315/3; KFL 400/3; LVE 250/3; LVE 315/3; SSH 250/3; SSH 315/3; SSP 250/3; SSP 315/3 DURO-NSE- 265/3; - 585533-104,5 44,5 54 21 25,5 30 13 1/16 x90 3,2 DURO-NSE- 315/3; KFD 250/3; KFD 315/3; KFD-F 250/3; KFD-F 315/3; KFD-E 250/3; KFD-E 315/3; KFD-HE 254/3; KFD-HE 315/3; KFD-HS 315/3; KFL 315/3; KFL 400/3; LVE 250/3; LVE 315/3 DURO-NG 400/3; DURO-NG 500/3; 046447 037531 046474 135 68 65 25,5 48 31+31 26 3/32 x 90 2,4 DURO-NG 630/3; DURO-NSE- 400/3; DURO-NSE- 500/3; DURO-NSE- 630/3; KFD 400/3; KFD 500/3; KFD 630/3; KFD 800/3; KFD-E 400/3; KFD-F-E 400/3; KFD-HE 400/3; KFD-HS 400/3; KFD-HS 500/3; KFL 500/3; KFL 600/3; LVE 1000/3; LVE 400/3; LVE 500/3; LVE 600/3; LVE 630/3; LVE 800/3 LVE 600/3; LVE 700/3-169464 - 170 80 75 30 56 42+42 32 3/32 x90 3,6 LVE 1000/3; LVE 800/3-169466 - 195 80 85 30 78 42+42 35 3/32 x90 4,5 KFD 1000/3; KFD 1250/3; KFD 1400/3; KFD 1600/3-152789 - 200 80 85 30 78 42 13 m=2 6 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. 10 within 4 weeks

Reversible top jaws, hardened, serration 60 RÖHM G G D H7 M RÖHM Tool group 21 Type 543-31 Reversible top jaws, 3-jaw set, hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg KFD-HE 130/3 154814 1) 54 23 27,5 10 13 14 10 1,5 x 60 0,16 KFD-HE 170/3 154674 1) 66 34,7 36 12 12,5 20 12 1,5 x 60 0,3 KFD-HE 210/3 154676 81 36 49 14 17,5 25 12 1,5 x 60 0,6 159776 81 36 49 17 17,5 25 12 1/16 x60 0,6 KFD-HE 254/3 154678 99,5 44,5 54 16 25,5 30 13 1,5 x 60 1,2 KFD-HE 315/3 154816 1) 103 50 55,5 21 22,5 30 17 1,5 x 60 1,5 1) one step only Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 11

Reversible top jaws, hardened, serration 60 RÖHM RÖHM G G F D H7 M Tool group 21 Type 530 Reversible top jaws, set, hardened, serration 60 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg KFM 130/3 045798 046406 56 26 37,5 11 13,5 16,5 10 1,5 x 60 0,165 KFE 170/3; KFG 160/3; KFM 160/3 046431 046410 62 26 37,5 11 17,5 16,5 10 1,5 x 60 0,215 KFE 215/3; KFG 215/3; KFM 215/3 046433 046412 1) 81 36 52,5 14 25 21 12 1,5 x 60 0,6 KFE 280/3; KFG 280/3; KFM 280/3 046437 046416 96 44,5 54 20 30 26 12 1,5 x 60 0,75 KFE 350/3; KFG 350/3; KFM 350/3 046443 046422 112 49,5 61 21 27 33 15 1,5 x 60 1,55 1) Near the serration reduced to 34 mm Reversible top jaws jaws, supplied as supplement or as spares, must be ground on the chuck. 12 within 4 weeks

Reversible top jaws, hardened, tongue and groove RÖHM K = = N O RÖHM F H D Tool group 36 Type 530 Reversible top jaws, 3-jaw set, hardened, tongue and groove, for external and internal chucking - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F H K N O DURO 160/3; DURO-N 140/3; DURO-N 175/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-T 160/3 332774 61,5 20,4 37 8 32,7 18 32 17,7 25,2 137047 62 24,4 40 8 35,7 18 32 17,7 25,7 094012 61,5 20,4 37 8 32,5 18 32 17,5 25 DURO 200/3; DURO-N 200/3; D URO-NSE 210/3; DURO-NSE 215/3; DURO-T 200/3 332775 70,5 24,4 42 10 38 20 40 18 28 137048 126 34,4 46 10 41 20 40 18 28 DURO 250/3; DURO-N 250/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-T 250/3 094013 70,5 24,4 43 10 38 20 40 18 28 332776 92 34,4 55 12 50 20 40 22 36 137049 92 35,7 59 12 54 20 40 22 36 094014 92 34,4 55 12 50 20 40 22 36 DURO 315/3; DURO-N 315/3; DURO-NSE 400/3; DURO-T 315/3 332777 107 37,5 61 12 56 26 54 26 41 137050 107 50,4 67 12 61 26 54 26 41 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-NSE 500/3; DURO-T 400/3; DURO-T 500/3 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-NSE 500/3; DURO-NSE 630/3; DURO-T 400/3; DURO-T 500/3 DURO 630/3; DURO-N 630/3; DURO-NSE 630/3; DURO-T 630/3 094015 107 35,7 62 12 56 26 54 26 41 332778 130 50,4 79 18 72 30 60 32 52 094045 130 50,4 79 18 72 30 60 32 52 747081 185 68 110 24 102 40 82 42 72 140715 185 68 110 24 102 40 82 42 72 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 13

H ase jaws G, hardened, diagonally toothing RÖHM RÖHM L F Tool group 28 Type 002 ase jaw G, 3-jaw set, with mounting bolts D huck Type 3-jaw set Jaw length Jaw width D F H L Weight approx. kg DURO 125/3; DURO-T 125/3 212119 47 14 5-22 20 0,2 DURO-N 140/3 140636 56 18 18 8 28,8 32 0,43 DURO 160/3; DURO-N 175/3; DURO-T 160/3 DURO 200/3; DURO-N 200/3; DURO-T 200/3 DURO 250/3; DURO-N 250/3; DURO-T 250/3 DURO 315/3; DURO-N 315/3; DURO-T 315/3 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-T 400/3; DURO-T 500/3 DURO 630/3; DURO-N 630/3; DURO-T 630/3 094004 74 20 18 8 29,5 32 0,265 094005 90 22 20 10 35 40 0,365 094006 110 26 20 12 40 40 0,7 094007 125 32 26 12 46 54 1,065 094044 160 45 30 18 52,7 60 2,35 140194 230 65 40 24 62 82 5,665 14 within 4 weeks

Soft one-piece jaws L, diagonally toothing RÖHM T RÖHM Tool group 28 Type 000 Soft one-piece jaw L, 3-jaw set, unstepped, material 16Mnr5 huck Type 3-jaw set Jaw length Jaw width Jaw height T Weight approx. kg DURO 125/3 332762 53 14 34 18 0,8 DURO-N 140/3 626158 70,5 18 41,5 21 1,3 DURO 160/3; DURO-N 175/3 DURO 200/3; DURO-N 200/3 332763 84,5 20 45 24 1,41 332764 98,4 22 60 35 2,52 162560 98,4 22 80 55 3,5 643088 98,4 22 90 65 4 321444 98,4 22 95 70 4,2 DURO 200/3; DURO-N 200/3; DURO-T 200/3 DURO 250/3; DURO-N 250/3 249678 98,4 22 60 35 0,9 332765 118,7 26 70 41 4,23 810394 118,7 26 80 51 5 162561 118,7 26 90 61 5,7 810396 118,7 26 100 71 6,4 616002 70 26 100 71 3,5 616000 115 26 130 101 8,5 695681 180 26 140 111 14,3 DURO 250/3; DURO-N 250/3; DURO-T 250/3 DURO 315/3; DURO-N 315/3 DURO 315/3; DURO-N 315/3; DURO-T 315/3 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-T 400/3; DURO-T 500/3 249679 118,7 26 70 41 1,535 332766 136,6 32 79 44,5 7,3 249680 136,6 32 79 44,5 2,4 332767 173,6 45 93 54 15,7 249681 173,6 45 93 54 5 within 4 weeks 15

RÖHM One-piece reversible jaws E, hardened, diagonally toothing RÖHM J H G T Tool group 28 Type 000 One-piece jaw E, 3-jaw set, hardened huck Type 3-jaw set Jaw length Jaw width Jaw height G H J T Weight approx. kg DURO 125/3 332756 50 14 34 29 24 19 18 0,6 DURO-N 140/3 140764 62 18 49,5 42 34,5 27 29 1,2 DURO 160/3; 332757 77,7 20 45 37,5 30 22,5 24 1,1 DURO-N 175/3 DURO 160/3; 094000 77,7 20 45 37,5 30 22,5 24 0,5 DURO-N 175/3; DURO-T 160/3 DURO 200/3; 332758 94,7 22 60 50 40 30 35 1,9 DURO-N 200/3 DURO 200/3; 094001 94,7 22 60 50 40 30 35 0,635 DURO-N 200/3; DURO-T 200/3 DURO 250/3; 332759 114 26 70 56-42 41 3,3 DURO-N 250/3 DURO 250/3; 094002 114 26 70 56-42 41 1,135 DURO-N 250/3; DURO-T 250/3 DURO 315/3; 332760 130 32 79 64-49 44,5 5,3 DURO-N 315/3 DURO 315/3; 094003 130 32 79 64-49 44,5 1,835 DURO-N 315/3; DURO-T 315/3 DURO 400/3; DURO 500/3; 332761 167 45 93 73-53 54 10,8 DURO-N 400/3; DURO-N 500/3 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-T 400/3; DURO-T 500/3 094043 167 45 93 73-53 54 3,665 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please send us the chuck. 16 within 4 weeks

Draw-down jaws N, diagonally toothing RÖHM E M6 D F RÖHM huck front side Tool group 21 Type 545-00 Draw-down jaws, piece, without interchangeable clamping inserts, diagonally toothing huck Type Item no. Jaw length Jaw width Jaw height D E F lamping range external lamping range internal Max. swing Thread DURO 160/3; DURO-N 140/3 151030 63 18 41,5 15 10,5 22,5 40-85 124-168 190 M6 151031 63 18 41,5 15 31,5 22,5 80-125 85-126 190 M6 DURO 160/3; 141037 84,4 20 43,5 15 11 22,5 29-80 162-205 220 M6 DURO-T 160/3 141038 84,4 20 43,5 15 32 22,5 70-120 120-164 220 M6 DURO-N 175/3; 141037 84,4 20 43,5 15 11 22,5 39-84 162-210 230 M6 DURO 200/3; DURO-N 200/3; DURO-NG 200/3; DURO-T 200/3 DURO 250/3; DURO-N 250/3; DURO-NG 250/3; DURO-T 250/3 DURO 315/3; DURO-N 315/3; DURO-NG 315/3; DURO-T 315/3 DURO 315/3; DURO 400/3; DURO 500/3; DURO-N 315/3; DURO-NG 315/3; DURO-T 315/3 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-NG 400/3; DURO-NG 500/3; DURO-T 400/3; DURO-T 500/3 DURO-N 400/3; DURO-NG 400/3; DURO-T 400/3 DURO-N 500/3; DURO-NG 500/3; DURO-T 500/3 Interchangeable clamping inserts 141038 84,4 20 43,5 15 32 22,5 81-126 120-170 230 M6 141039 98,4 22 47,5 15 12 22,5 34-112 190-263 280 M6 141040 98,4 22 47,5 15 48 22,5 104-185 120-192 280 M6 141041 118,7 26 58,5 20 12 29,5 38-133 235-325 330 M6 141042 118,7 26 58,5 20 58 29,5 128-225 145-236 330 M6 141043 136,4 32 63,9 20 12 29,5 43-170 275-398 370 M6 141044 136,4 32 63,9 20 72 29,5 160-290 158-278 370 M6 141045 173,6 45 73,4 25 12 34,3 48-250 354-556 506 M6 141046 173,6 45 73,4 25 77 34,3 175-316 230-362 506 M6 141048 173,6 45 73,4 25 110 34,3 240-450 162-360 570 M6 Tool group 15 Type 545-60 Interchangeable clamping inserts, 1 piece, with claws huck Type Item no. Size Design ontents of delivery DURO-N 140/3 151029 140 with claws piece DURO-N 175/3; DURO-N 200/3; DURO-NG 200/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 160/3; DURO-T 200/3 DURO-N 250/3; DURO-N 315/3; DURO-NG 250/3; DURO-NG 315/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-NSE 400/3; DURO-T 250/3; DURO-T 315/3 DURO-N 400/3; DURO-N 500/3; DURO-N 630/3; DURO-NG 400/3; DURO-NG 500/3; DURO-NSE 500/3; DURO-T 400/3; DURO-T 500/3; DURO-T 630/3 141049 160/200 with claws piece 141052 250/315 with claws piece 141055 400/500 with claws piece within 4 weeks 17

Interchangeable clamping inserts RÖHM RÖHM Tool group 15 Type 545-70 Interchangeable clamping inserts, 1 piece, with serrated toothing huck Type Item no. Size Design ontents of delivery DURO-N 140/3 151039 140 with serrated toothing piece DURO-N 175/3; DURO-N 200/3; DURO-NG 200/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 160/3; DURO-T 200/3 DURO-N 250/3; DURO-N 315/3; DURO-NG 250/3; DURO-NG 315/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-NSE 400/3; DURO-T 250/3; DURO-T 315/3 DURO-N 400/3; DURO-N 500/3; DURO-NG 400/3; DURO-NG 500/3; DURO-NSE 500/3; DURO-T 400/3; DURO-T 500/3 141050 160/200 with serrated toothing piece 141053 250/315 with serrated toothing piece 141056 400/500 with serrated toothing piece Tool group 15 Type 545-80 Interchangeable clamping inserts, 1 piece, with heat treatable surface huck Type Item no. Size Design ontents of delivery DURO-N 140/3 151040 140 with heat treatable surface piece DURO-N 175/3; DURO-N 200/3; DURO-NG 200/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 160/3; DURO-T 200/3 DURO-N 250/3; DURO-N 315/3; DURO-NG 250/3; DURO-NG 315/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-NSE 400/3; DURO-T 250/3; DURO-T 315/3 DURO-N 400/3; DURO-N 500/3; DURO-NG 400/3; DURO-NG 500/3; DURO-NSE 500/3; DURO-T 400/3; DURO-T 500/3 141051 160/200 with heat treatable surface piece 141054 250/315 with heat treatable surface piece 141057 400/500 with heat treatable surface piece Tool group 15 Typ 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 151040 2 M6 5 9 141051 2 M6 10 9 141054 2 M6 15 9 18 within 4 weeks

ase jaws GG, hardened, straight toothing RÖHM L RÖHM F H D Tool group 21 Type 574-11 ase jaws, 3-jaw-set, hardened, straight toothing, with cylindrical screws DIN 912-12.9 huck Type 3-jaw set Jaw length Jaw width D F H L Weight approx. kg DURO-NSE 170/3; DURO-NSE 180/3 463548 65 20 18 8 27,5 32 0,7 DURO-NSE 210/3; DURO-NSE 215/3; DURO-NSE 225/3 463549 85 22 20 10 29,5 40 1 DURO-NSE 260/3; DURO-NSE 265/3 463550 104 26 20 12 37 40 1,8 DURO-NSE 315/3 463551 115 32 20 12 43 40 2,7 DURO-NSE 400/3 463552 125 32 26 12 43 54 3 DURO-NSE 500/3 463553 160 45 30 18 57 60 7,1 DURO-NSE 630/3 463554 200 45 30 18 57 60 9 within 4 weeks 19

Soft one-piece jaws LG, straight toothing RÖHM RÖHM E T Tool group 21 Type 574-37 Soft one-piece jaws, 3-jaw set, straight toothing, guidance hardened and ground - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D E T Weight approx. kg D DURO-NSE 170/3; DURO-NSE 180/3 463562 65 20 55 56 25 33 1,3 DURO-NSE 210/3; DURO-NSE 215/3 463563 84 22 65 67,5 27 38 2,2 DURO-NSE 225/3; DURO-NSE 463564 99 26 84 77 36 53 4,3 260/3; DURO-NSE 265/3 DURO-NSE 315/3 463565 121 32 90 93 41 54 6,7 DURO-NSE 400/3 463566 148 32 100 120 41 64 9,2 DURO-NSE 500/3 463567 175 45 124 154 54 77 20,5 DURO-NSE 630/3 463568 230 45 134 200 54 87 29,2 20 within 4 weeks

RÖHM One-piece reversible jaws EG, hardened, straight toothing J H G RÖHM T Tool group 21 Type 574-27 One-piece reversible jaws, 3-jaw set, hardened, straight toothing - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height G H J T Weight approx. kg DURO-NSE 170/3; DURO-NSE 180/3 463555 58 20 44 37 30 23 23 0,6 DURO-NSE 210/3; DURO-NSE 215/3 463556 75 22 51 43 35 27 26 1,3 DURO-NSE 225/3; DURO-NSE 463557 90 26 60 50 40 30 31 2 260/3; DURO-NSE 265/3 DURO-NSE 315/3 463558 117 32 66 56 46 36 32 3,4 DURO-NSE 400/3 463559 137 32 70 59 48 37 36 4,9 DURO-NSE 500/3 463560 176 45 93 73 53 46 11,7 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 21

Draw-down jaws NG, straight toothing RÖHM E RÖHM M6 D F Tool group 21 Type 545-30 Draw-down jaws, 1 piece, without interchangeable clamping inserts, straight toothing huck Type Item no. Jaw length Jaw width Jaw height D E F lamping range external lamping range internal Max. swing Thread DURO-NSE 170/3; DURO-NSE 180/3 DURO-NSE 210/3; DURO-NSE 215/3 DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3 485522 65 20 43 15 11 22,5 38-83 125-172 195 M6 485523 72 20 43 15 30 22,5 78-122 98-134 209 M6 485524 85 22 47 15 12 22,5 38-121 170-242 270 M6 485525 95 22 47 15 45 22,5 113-187 114-185 290 M6 485526 104 26 58 20 12 29,5 42-130 204-290 312 M6 485527 104 26 58 20 50,5 29,5 120-208 128-220 312 M6 DURO-NSE 315/3 485528 115 32 63 20 12 29,5 44-164 236-344 374 M6 485529 123 32 63 20 61,5 29,5 148-262 138-245 390 M6 DURO-NSE 400/3 485530 125 32 63 20 12 29,5 48-222 294-424 452 M6 485531 134 32 63 20 67 29,5 204-332 132-312 470 M6 DURO-NSE 500/3 485532 160 45 81 20 12 34 45-250 314-520 552 M6 485533 160 45 81 25 96 34 225-418 161-354 552 M6 Interchangeable clamping inserts Tool group 15 Type 545-60 Interchangeable clamping inserts, 1 piece, with claws huck Type Item no. Size Design ontents of delivery DURO-N 140/3 151029 140 with claws piece DURO-N 175/3; DURO-N 200/3; DURO-NG 200/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 160/3; DURO-T 200/3 DURO-N 250/3; DURO-N 315/3; DURO-NG 250/3; DURO-NG 315/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-NSE 400/3; DURO-T 250/3; DURO-T 315/3 DURO-N 400/3; DURO-N 500/3; DURO-N 630/3; DURO-NG 400/3; DURO-NG 500/3; DURO-NSE 500/3; DURO-T 400/3; DURO-T 500/3; DURO-T 630/3 141049 160/200 with claws piece 141052 250/315 with claws piece 141055 400/500 with claws piece 22 within 4 weeks

Interchangeable clamping inserts RÖHM RÖHM Tool group 15 Type 545-70 Interchangeable clamping inserts, 1 piece, with serrated toothing huck Type Item no. Size Design ontents of delivery DURO-N 140/3 151039 140 with serrated toothing piece DURO-N 175/3; DURO-N 200/3; DURO-NG 200/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 160/3; DURO-T 200/3 DURO-N 250/3; DURO-N 315/3; DURO-NG 250/3; DURO-NG 315/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-NSE 400/3; DURO-T 250/3; DURO-T 315/3 DURO-N 400/3; DURO-N 500/3; DURO-NG 400/3; DURO-NG 500/3; DURO-NSE 500/3; DURO-T 400/3; DURO-T 500/3 141050 160/200 with serrated toothing piece 141053 250/315 with serrated toothing piece 141056 400/500 with serrated toothing piece Tool group 15 Type 545-80 Interchangeable clamping inserts, 1 piece, with heat treatable surface huck Type Item no. Size Design ontents of delivery DURO-N 140/3 151040 140 with heat treatable surface piece DURO-N 175/3; DURO-N 200/3; DURO-NG 200/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 160/3; DURO-T 200/3 DURO-N 250/3; DURO-N 315/3; DURO-NG 250/3; DURO-NG 315/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO-NSE 315/3; DURO-NSE 400/3; DURO-T 250/3; DURO-T 315/3 DURO-N 400/3; DURO-N 500/3; DURO-NG 400/3; DURO-NG 500/3; DURO-NSE 500/3; DURO-T 400/3; DURO-T 500/3 141051 160/200 with heat treatable surface piece 141054 250/315 with heat treatable surface piece 141057 400/500 with heat treatable surface piece Tool group 15 Typ 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 151040 2 M6 5 9 141051 2 M6 10 9 141054 2 M6 15 9 within 4 weeks 23

law-type jaws, hardened, serration 90, groove 10/12 RÖHM 10 RÖHM 10 M M D H7 1 / 16 x 90 o Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 10 huck Type Item no. Jaw length Jaw height D lamping range external lamping range internal Max. swing Thread KFD-HS 110/3 149920 42 37,1 27 10 20-49 84-130 110 M5 149921 42 23,4 27 10 47-70 56-102 110 M5 149922 47 17,7 27 10 68-100 45-75 110 M5 KFD-HS 130/3 147259 50 41 27 10 27-67 100-130 130 M5 147261 44 22 27 10 58-108 58-108 130 M5 KFD-HS 140/3 147261 44 22 27 10 61-114 61-114 140 M5 147259 50 41 27 10 35-72 106-140 140 M5 KFD 130/2; KFD 130/3; KFD-HE 170/3; KFD-HS 160/2; KFD-HS 160/3; KFD-HS 160/4; KFD-HS 175/3; LVE 125/3; LVE 160/3; SSH 160/2; SSH 160/3; SSP 160/2; SSP 160/3 144320 66 52 38 12 38-84 122-180 160 M6 144321 56 34 38 12 78-122 92-140 160 M6 144322 66 25 38 12 120-146 70-100 160 M6 KFD-HS 175/3; 144320 66 52 38 12 48-100 132-195 175 M6 144321 56 34 38 12 88-140 102-155 175 M6 144322 66 25 38 12 130-160 70-115 175 M6 Tool group 15 Typ 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 147263 1 M5 5 7 139177 1 M5 8 7 298191 1 M5 10 7 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 24 within 4 weeks

law-type jaws, hardened, serration 90, groove 17 RÖHM 10 10 RÖHM M M D H7 1 / 16 x 90 o Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 17 huck Type Item no. Jaw length Jaw height D lamping range external lamping range internal Max. swing Thread KFD 160/2; KFD 160/3; KFD 160/4; KFD 200/2; KFD 200/3; KFD 200/4; KFD-E 200/3; KFD-F-E 200/3; KFD-HE 210/3; KFD-HS 200/2; KFD-HS 200/3; KFD-HS 200/4; KFD-HS 250/2; KFD-HS 250/3; KFD-HS 250/4; KFL 250/3; LVE 200/3; SSH 200/2; SSH 200/3; SSP 200/2; SSP 200/3 137031 67 53 45 17 38-56 - 170 M6 137032 65 46 45 17 51-71 146-178 170 M6 137033 55 39 45 17-132-165 195 M6 137034 50 31 45 17 83-102 114-123 170 M6 137035 55 27 45 17 97-117 102-116 170 M6 137036 65 19 45 17-50-70 170 M6 137037 65 26 45 17-68-85 170 M6 137038 55 24 45 17-82-104 170 M6 137039 55 40 45 17 66-87 120-135 170 M6 KFD 200/2; KFD 200/3; KFD 200/4; KFD-E 200/3; KFD-F-E 200/3; KFD-HE 210/3; KFD-HS 200/2; KFD-HS 200/3; KFD-HS 200/4; LVE 200/3; SSH 200/2; SSH 200/3; SSP 200/2; SSP 200/3 137031 67 53 45 17 60-96 - 210 M6 137032 65 46 45 17 73-111 168-218 210/260 M6 137033 55 39 45 17-154-205 235 M6 137034 50 31 45 17 105-142 136-163 210 M6 137035 55 27 45 17 119-157 124-156 210 M6 137036 65 19 45 17-72-110 210 M6 137037 65 26 45 17-90-125 210 M6 137038 55 24 45 17-104-144 210 M6 137039 55 40 45 17 88-127 144-175 210 M6 KFD 250/2; KFD 250/3; KFD 250/4; KFD-HS 250/2; KFD-HS 250/3; KFD-HS 250/4; KFL 250/3; 137031 67 53 45 17 90-146 - 260 M6 137032 65 46 45 17 103-161 - 260 M6 137033 55 39 45 17-184-255 285 M6 137034 50 31 45 17 135-192 166-213 260 M6 137035 55 27 45 17 149-207 154-206 260 M6 137036 65 19 45 17-102-160 260 M6 137037 65 26 45 17-120-175 260 M6 137038 55 24 45 17-134-194 260 M6 137039 55 40 45 17 118-177 174-225 260 M6 Interchangeable workpiece rests in different lengths on page 26 within 4 weeks 25

law-type jaws, hardened, serration 90, groove 21 RÖHM 10 RÖHM 10 M M D H7 1 / 16 x 90 o Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 21 huck Type Item no. Jaw length Jaw height D lamping range external lamping range internal Max. swing Thread KFD 250/2; KFD 250/4; KFD 315/2; KFD 315/3; KFD 315/4; KFD-E 250/3; KFD-E 315/3; KFD-F-E 250/3; KFD-F-E 315/3; KFD-HE 254/3; KFD-HE 315/3; KFD-HS 250/3; KFD-HS 315/2; KFD-HS 315/3; KFL 315/3; KFL 400/3; LVE 250/3; LVE 315/3; SSH 250/2; SSH 250/3; SSH 315/2; SSH 315/3; SSP 250/2; SSP 250/3; SSP 315/2; SSP 315/3 137041 95 80 50 21 53-95 - 260 M6 137042 75 60 50 21 92-133 212-265 260 M6 137043 60 43 50 21 125-167 178-240 260 M6 137044 70 37 50 21 156-198 146-186 278 M6 137045 95 25 50 21-68-112 260 M6 137046 80 30 50 21-108-154 260 M6 KFD 250/2; KFD 250/4; KFD 315/2; KFD 315/3; KFD 315/4; KFD-E 250/3; KFD-E 315/3; KFD-F-E 250/3; KFD-F-E 315/3; KFD-HE 254/3; KFD-HE 315/3; KFD-HS 250/3; KFD-HS 315/2; KFD-HS 315/3; KFL 315/3; KFL 400/3; LVE 250/3; LVE 315/3; SSH 250/2; SSH 250/3; SSH 315/2; SSH 315/3; SSP 250/2; SSP 250/3; SSP 315/2; SSP 315/3 KFD 250/2; KFD 250/4; KFD 315/2; KFD 315/3; KFD 315/4; KFD-E 250/3; KFD-E 315/3; KFD-F-E 250/3; KFD-F-E 315/3; KFD-HE 254/3; KFD-HE 315/3; KFD-HS 250/3; KFD-HS 315/2; KFD-HS 315/3; KFL 315/3; KFL 400/3; LVE 250/3; LVE 315/3; SSH 250/2; SSH 250/3; SSH 315/2; SSH 315/3; SSP 250/2; SSP 250/3; SSP 315/2; SSP 315/3 137041 95 80 50 21 66-160 - 325 M6 137042 75 60 50 21 105-198 225-330 325/365 M6 137043 60 43 50 21 138-232 191-305 325/343 M6 137044 70 37 50 21 169-263 159-240 325/343 M6 137045 95 25 50 21-81-177 325 M6 137046 80 30 50 21-151-304 325 M6 137041 95 80 50 21 106-245 - 415 M6 137042 75 60 50 21 145-283 255-415 415/450 M6 137043 60 43 50 21 178-317 221-390 415/433 M6 137044 70 37 50 21 209-348 189-336 415 M6 137045 95 25 50 21-111-262 415 M6 137046 80 30 50 21-151-304 415 M6 Tool group 15 Typ 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 26 within 4 weeks

law-type jaws, hardened, serration 90, groove 25,5 RÖHM 10 16 RÖHM M M D H7 3 / 32 x 90 o Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 25,5 huck Type Item no. Jaw length Jaw height D lamping range external lamping range internal Max. swing Thread KFD 400/2; KFD 400/3; KFD 400/4; KFD 500/2; KFD 500/3; KFD 500/4; KFD 630/2; KFD 630/3; KFD 630/4; KFD 800/3; KFD 800/4; KFD-E 400/3; KFD-F-E 400/3; KFD-HE 400/3; KFD-HS 400/3; KFD-HS 500/3; KFL 500/3; KFL 600/3; LVE 400/3; LVE 500/3; LVE 600/3 KFD 400/2; KFD 400/3; KFD 400/4; KFD 500/2; KFD 500/3; KFD 500/4; KFD 630/2; KFD 630/3; KFD 630/4; KFD 800/3; KFD 800/4; KFD-E 400/3; KFD-F-E 400/3; KFD-HE 400/3; KFD-HS 400/3; KFD-HS 500/3; KFL 500/3; KFL 600/3; LVE 400/3; LVE 500/3; LVE 600/3 KFD 400/2; KFD 400/3; KFD 400/4; KFD 500/2; KFD 500/3; KFD 500/4; KFD 630/2; KFD 630/3; KFD 630/4; KFD 800/3; KFD 800/4; KFD-E 400/3; KFD-F-E 400/3; KFD-HE 400/3; KFD-HS 400/3; KFD-HS 500/3; KFL 500/3; KFL 600/3; LVE 400/3; LVE 500/3; LVE 600/3 137051 130 113 65 25,5 80-180 300-460 415 M6 137052 90 67 65 25,5 170-270 - 415 M6 137053 100 45 65 25,5 256-390 260-395 415 M6 137054 130 33 65 25,5-100-215 415 M6 137051 130 113 65 25,5 80-280 300-560 515/600 M6 137052 90 67 65 25,5 170-270 - 515 M6 137053 100 45 65 25,5 270-494 200-400 590/515 M6 137054 130 33 65 25,5-100-315 515 M6 137051 130 113 65 25,5 114-410 334-690 645/730 M6 137052 90 67 65 25,5 204-500 - 645 M6 137053 100 45 65 25,5 290-619 220-525 720/645 M6 137054 130 33 65 25,5-134-445 645 M6 Tool group 15 Typ 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 27

law-type jaws, hardened, serration 60 RÖHM 10 RÖHM 10 M M D H7 Tool group 21 Type 543-33 law-type jaws, 1 piece, hardened, serration 60 - width of the groove 12 1,5 x 60 o huck Type Item no. Jaw length Jaw height D lamping range external lamping range internal Max. swing Thread KFD-HE 170/3 156025 67 53 45 12 39-83 - 170 M6 156027 65 46 45 12 52-98 150-190 170 M6 156029 55 40 45 12 78-124 125-168 170 M6 161189 55 24 45 12 110-155 92-135 170 M6 KFD-HE 254/3 156099 95 80 50 16 60-102 - 250 M6 156101 75 60 50 16 99-140 222-275 250 M6 156103 60 43 50 16 132-174 188-250 250 M6 156105 70 37 50 16 163-205 158-198 250 M6 Tool group 15 Typ 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 28 within 4 weeks

law-type jaws, hardened, tongue and groove RÖHM 8 mm size 160/175 D 10 RÖHM 10 Tool group 21 Type 544-00 Reversible claw-type top jaws, tongue and groove, 1 piece, hardened huck Type Item no. Jaw length Jaw width Jaw height D lamping range external lamping range internal M6 M6 Max. swing Thread 7 ( Size 400/500) 5 (Size 200-315) 4,5 (Size 160) DURO-N 140/3; DURO-N 175/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO-T 160/3 DURO 160/3; DURO-N 160/3; DURO-T 160/3 DURO-N 175/3; DURO-NSE 170/3; DURO-NSE 180/3; DURO 200/3; DURO-N 200/3; DURO- NG 200/3; DURO-NSE 210/3; DURO-NSE 215/3; DURO-T 160/3; DURO-T 200/3 DURO-N 250/3; DURO-NG 250/3; DURO-NSE 225/3; DURO-NSE 260/3; DURO-NSE 265/3; DURO- NSE 315/3; DURO-T 250/3 DURO 315/3; DURO-N 315/3; DURO-NG 315/3; DURO-NSE 400/3; DURO-T 315/3 DURO 400/3; DURO-N 400/3; DURO-NG 400/3 DURO 500/3; DURO-N 500/3; DURO- NG 500/3; DURO-NSE 500/3; DURO-NSE 630/3; DURO-T 500/3 137060 66 24 37,5 17-50-84 190 M6 137061 66 20 37,5 61 24-60 142-182 190 M6 137062 56 20 37,5 29 74-118 80-130 190 M6 137060 66 24 37,5 17-50-105 220 M6 137061 66 20 37,5 61 30-88 140-214 220 M6 137062 56 20 37,5 29 70-150 80-152 220 M6 137060 66 24 37,5 17-58-113 230 M6 137061 66 20 37,5 61 38-96 148-222 230 M6 137062 56 20 37,5 29 78-158 88-160 230 M6 137064 81 24 43 71 40-130 166-250 280 M6 137065 66 24 43 38,5 76-200 98-205 280 M6 137066 79 34 43 29,5-72-185 280 M6 137067 81 34 43 71 40-130 166-250 280 M6 137068 66 34 43 38,5 76-200 98-205 280 M6 137108 90 34 55 78 50-185 180-304 330 M6 137109 72 34 55 38 94-260 104-252 330 M6 137110 80 50 55 29-70-215 330 M6 137111 90 50 55 78 50-165 180-304 330 M6 137112 72 50 55 38 94-240 104-252 330 M6 137114 100 34 62 90 50-222 212-374 404 M6 137115 86 34 62 42 120-320 116-316 404 M6 137116 93 50 62 30-80-275 404 M6 137117 106 50 62 90 50-222 212-384 404 M6 137118 86 50 62 42 120-320 116-316 404 M6 137119 124 50 62 39-100-350 506 M6 137120 124 50 62 112 280-482 280-482 506 M6 137121 100 50 62 48 155-395 155-395 506 M6 137119 124 50 62 39-100-410 570 M6 137120 124 50 62 112 50-342 280-542 570 M6 137121 100 50 62 48 165-464 155-455 570 M6 Tool group 15 Typ 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 29

Soft segment top jaws, serration 90 RÖHM RÖHM Design I Design II Tool group 21 Type 9052 Segment top jaws, 3 jaw set, can be hardened, serration 1 / 16 x90 - material: 15 huck Type 3-jaw set N K J Material Design Weight approx. kg KFD 160/3; KFD-F 160/3 1032909 120 60 60 17 15 22 steel Design I 9 1032910 120 64 64 17 15 22 aluminium Design I 3,2 1032911 169 76 76 17 21,5 22 steel Design II 13 1032912 169 76 76 17 21,5 22 aluminium Design II 4 KFD 200/3; KFD-F 200/3; KFD-HE 210/3; KFD-HS 200/3; KFL 250/3; LVE 200/3 KFD 200/3; KFD-F 200/3; KFD-HE 210/3; KFD-HS 200/3; KFD-HS 250/3; KFL 250/3; LVE 200/3 1032913 150 64 76 17 15 22 steel Design I 14 1032914 150 64 76 17 15 22 aluminium Design I 5 1032915 210 76 95 17 25 22 steel Design II 21 1032916 210 76 95 17 25 22 aluminium Design II 7 KFD-HS 250/3; KFL 250/3 1032917 170 64 89 17 20 22 steel Design I 20 1032918 170 64 89 17 20 22 aluminium Design I 7 30 within 4 weeks

Soft segment top jaws, serration 60 RÖHM RÖHM Design I Design II Tool group 21 Type 9052 Segment top jaws, 3 jaw set, can be hardened, serration 1,5x60 / 3x60 - material: 15 huck Type 3-jaw set N K J Material Design Weight approx. kg KFD-HE 170/3 1032921 120 60 60 12 15 20 steel Design I 9 1032922 120 64 64 12 15 20 aluminium Design I 3,2 1032923 169 76 76 12 20 20 steel Design II 13 1032924 169 76 76 12 20 20 aluminium Design II 4 KFD-HE 210/3 1032925 150 64 76 14 15 25 steel Design I 14 1032926 150 64 76 14 15 25 aluminium Design I 5 1032927 210 76 95 14 25,5 25 steel Design II 20 1032928 210 76 95 14 25,5 25 aluminium Design II 7 KFD-HE 254/3 1032929 170 64 89 16 20 30 steel Design I 20 1032930 170 64 89 16 20 30 aluminium Design I 7 1032931 254 76 111 16 27 30 steel Design II 29 1032932 254 76 111 16 27 30 aluminium Design II 10 KFD-HE 315/3; KFE 350/3; KFG 350/3; KFM 350/2; KFM 350/3 1032937 240 76 118 21 30 30 steel Design I 28 1032938 240 76 118 21 30 30 aluminium Design I 10 1032939 304 76 133 21 34 30 steel Design II 41 1032940 304 76 133 21 34 30 aluminium Design II 14 within 4 weeks 31

T-nuts for power chucks and stationary power chucks RÖHM RÖHM E G D Tool group 15 Type 538-00 T-nuts, without screw, for SV 1 / 16 x 90 huck Type Item no. ontents of delivery D E G KFD-HE 130/3 154033 piece 10 M8 14 KFD-HE 210/3 157569 1) piece 17 M12-1) single T-nut E G D Tool group 15 Type 549-00 Extended T-nuts, without screw huck Type Item no. ontents of delivery D E G KFD-HS 110/3 149471 piece 30 10 M8 15 KFD-HS 130/3; KFD-HS 140/3 298082 piece 34 10 M6 2x12 KFD-HE 170/3; KFD-HS 160/3; KFD-HS 175/3; LVE 160/3; 343234 piece 42 12 M8 2x15 SSH 160/2; SSH 160/3; SSP 160/2; SSP 160/3 KFD-HE 254/3; KFD-HE 315/3; KFD-HS 315/3; LVE 250/3; 135767 1) piece 46 21 M16 25 LVE 315/3; SSH 250/2; SSH 250/3; SSH 315/2; SSH 315/3; SSP 250/2; SSP 250/3; SSP 315/2; SSP 315/3 KFD-HS 250/3 143595 piece 36 17 M12 19 KFD-HS 400/3; KFD-HS 500/3 135769 piece 59 25,5 M 20 31 E G D Tool group 15 Type 440-90 T-nuts, without screw, for SV 1,5 x 60 huck Type Item no. ontents of delivery D E G KFD-HE 170/3 154651 piece 12 M10 20 KFD-HE 210/3 154659 piece 14 M12 25 KFD-HE 254/3 154672 piece 16 M12 30 KFD-HE 315/3 155219 piece 21 M16 30 32 within 4 weeks

RÖHM T-nuts for power chucks and stationary power chucks E RÖHM D Tool group 15 Type 538-00 T-nuts, without screw huck Type Item no. ontents of delivery D E KFD 110/3; KFD 125/3; KFD 140/3 004254 piece 10 M6 LVE 125/3 041245 1) piece 12 M8 KFD 130/3 241673 piece 12 M8 KFD-HS 200/3; LVE 200/3; SSH 200/2; SSH 200/3; SSP 200/2; SSP 200/3 135765 piece 17 M 12 KFD 160/3; KFD 200/3; KFD-E 200/3; KFL 250/3 241674 piece 17 M12 KFD 250/3; KFD 315/3; KFD-E 250/3; KFD-E 315/3; KFL 315/3; KFL 400/3 241675 piece 21 M16 KFD 400/3; KFD 500/3; KFD 630/3; KFD 800/3; KFD-E 400/3; 241676 1) piece 25,5 M20 KFD-HE 400/3; KFL 500/3; KFL 600/3 KFD 1000/3; KFD 1250/3; KFD 1400/3; KFD 1600/3 146801 piece 30 M24 Single T-nut E D Tool group 15 Type 530-05 T-nuts, without screw huck Type Item no. ontents of delivery D E KFM 130/2; KFM 130/3 028311 piece 11 M8 KFE 170/2; KFE 170/3; KFG 160/2; KFG 160/3; KFM 160/2; KFM 160/3 029874 piece 11 M8 KFE 215/2; KFE 215/3; KFG 215/2; KFG 215/3; KFM 215/2; KFM 215/3 028329 piece 14 M10 KFE 280/2; KFE 280/3; KFG 280/2; KFG 280/3; KFM 280/2; KFM 280/3 009744 piece 20 M12 KFE 350/2; KFE 350/3; KFG 350/2; KFG 350/3; KFM 350/2; KFM 350/3 031051 piece 21 M16 E D Tool group 15 Type 525-00 T-nuts, without screw huck Type Item no. ontents of delivery D E LVE 400/3; LVE 500/3; LVE 600/3 588960 piece 25,5 M20 169447 piece 25,5 3/4-10 UN LVE 1000/3; LVE 600/3; LVE 700/3; LVE 800/3 588770 piece 30 M24 169448 piece 30 7/8-9 UN within 4 weeks 33

Mounting bolts for top jaws RÖHM RÖHM Tool group 15 Type 0040-Y Mounting screws huck Type Item no. ontents of delivery Thread KFE 170/2; KFE 170/3; KFG 160/2; KFG 160/3; KFM 130/2; KFM 340015 piece M8x18 130/3; KFM 160/2; KFM 160/3 KFD 110/3; KFD 125/3; KFD 140/3; KFD-HS 130/3; KFD-HS 140/3 343003 piece M6x18 KFE 215/2; KFE 215/3; KFG 215/2; KFG 215/3; KFM 215/2; KFM 215/3 216594 piece M10x20 KFD 250/3; KFD 315/3; KFD-E 250/3; KFD-E 315/3; 229157 piece M16x30 KFD-HE 254/3; KFD-HE 315/3; KFD-HS 315/3; KFL 315/3; KFL 400/3 KFD-HE 130/3 248149 piece M8x20 KFD-HE 170/3 216588 piece M10x25 DURO-NSE 500/3; DURO-NSE 630/3; KFD-HE 400/3 216569 piece M16x40 LVE 400/3; LVE 500/3; LVE 600/3 243854 piece 3/4-10 UNx2 LVE 1000/3; LVE 600/3; LVE 700/3; LVE 800/3 236514 piece M24x60 ylindrical screw to DIN 912, 12.9 680392 piece 7/8-9 UNx2-1/4 Tool group 15 Type 0040-Y Jaw mounting bolt, piece huck Type Item no. ontents of delivery Thread DURO 125/3; DURO-T 125/3; ZG 160/3 243893 piece M6x10 DURO 160/3; DURO 200/3; DURO 160/3; DURO 200/3; 200182 piece M8x1x22 DURO-N 140/3; DURO-N 175/3; DURO-N 200/3; DURO-T 160/3; DURO-T 200/3; ZG 160/3 DURO 250/3; DURO 250/3; DURO-N 250/3; DURO-T 250/3; 200183 piece M12x1,5x30 ZG 160/3 DURO 315/3; DURO-N 315/3; DURO-T 315/3; ZG 160/3 202402 piece M12x1,5x35 DURO 400/3; DURO 500/3; DURO-N 400/3; DURO-N 500/3; DURO-T 400/3; DURO-T 500/3; ZG 160/3 DURO 630/3; DURO-N 630/3; DURO-T 630/3; LVE 400/3; LVE 500/3; LVE 600/3; ZG 160/3 227618 piece M16x1,5x40 249388 piece M20x50 34 within 4 weeks

Mounting bolts for top jaws RÖHM RÖHM bolt 1 Tool group 15 Type 0040-Y Mounting bolt for top jaws, bolt 1 huck Type Item no. ontents of delivery Thread LVE 160/3; SSH 160/2; SSH 160/3; SSP 160/2; SSP 160/3; ZG 125/3; ZG 125/4; ZGF 125/2; ZG Hi-Tru 125/3; ZGU 125/3; ZGU 125/4; ZS 125/3; ZS 125/4; ZSU 125/3; ZSU 125/4 ZG 315/3; ZG 315/4; ZGD 315/3; ZGF 315/2; ZG Hi-Tru 315/3; ZGU 315/3; ZGU 315/4; ZS 315/3; ZS 315/4; ZSU 315/3; ZSU 315/4 ZG 500/3; ZG 500/4; ZG 630/3; ZG 630/4; ZGD 500/3; ZGU 500/3; ZGU 630/3; ZGU 630/4; ZS 500/3; ZS 500/4; ZS 630/3; ZS 630/4; ZSU 500/3; ZSU 630/3; ZSU 630/4 236949 piece M8x25 233026 piece M12x45 249003 piece M20x80 bolt 2 Tool group 15 Type 0040-Y Mounting bolt for top jaws, bolt 2 huck Type Item no. ontents of delivery Thread ZG 100/3; ZG 100/4; ZG 110/3; ZG 110/4; ZGF 100/2; ZG Hi-Tru 100/3; ZGU 100/3; 216528 piece M6x16 ZGU 100/4; ZGU 110/3; ZGU 110/4; ZS 100/3; ZS 100/4; ZSU 100/3; ZSU 100/4 DURO-NSE 170/3; DURO-NSE 210/3; DURO-NSE 225/3; KFD 130/3; KFD-HE 170/3; KFD-HS 110/3; KFD-HS 160/3; KFD-HS 175/3; LVE 125/3; ZG 125/3; ZG 125/4; ZG 140/3; ZG 140/4; ZG 160/3; ZG 160/4; ZG 200/3; ZG 200/4; ZGD 200/3; ZGD 230/3; ZGF 125/2; ZGF 160/2; ZGF 200/2; ZG Hi-Tru 125/3; ZG Hi-Tru 160/3; ZG Hi-Tru 200/3; ZGU 125/3; ZGU 125/4; ZGU 140/3; ZGU 140/4; ZGU 160/3; ZGU 160/4; ZGU 200/3; ZGU 200/4; ZS 125/3; ZS 125/4; ZS 140/3; ZS 140/4; ZS 160/3; ZS 160/4; ZS 200/3; ZS 200/4; ZSU 125/3; ZSU 125/4; ZSU 140/3; ZSU 140/4; ZSU 160/3; ZSU 160/4; ZSU 200/3; ZSU 200/4 233058 piece M8x20 KFD 160/3; KFD 200/3; KFD-E 200/3; KFD-HE 210/3; KFD-HS 200/3; KFD-HS 250/3; 227692 piece M12x25 KFL 250/3; ZG 250/3; ZG 250/4; ZGD 250/3; ZGD 270/3; ZGF 250/2; ZG Hi-Tru 250/3; ZGU 250/3; ZGU 250/4; ZS 250/3; ZS 250/4; ZSU 250/3; ZSU 250/4 DURO-NSE 265/3; DURO-NSE 315/3; DURO-NSE 400/3; KFD-HE 210/3; 233030 piece M12x30 KFD-HE 254/3; KFD-HE 315/3; KFE 280/2; KFE 280/3; KFG 280/2; KFG 280/3; KFM 280/2; KFM 280/3; LVE 200/3; SSH 200/2; SSH 200/3; SSP 200/2; SSP 200/3; ZG 315/3; ZG 315/4; ZGD 315/3; ZGF 315/2; ZG Hi-Tru 315/3; ZGU 315/3; ZGU 315/4; ZS 315/3; ZS 315/4; ZSU 315/3; ZSU 315/4 KFE 350/2; KFE 350/3; KFG 350/2; KFG 350/3; KFM 350/2; KFM 350/3; LVE 250/3; 220564 piece M16x35 LVE 315/3; SSH 250/2; SSH 250/3; SSH 315/2; SSH 315/3; SSP 250/2; SSP 250/3; SSP 315/2; SSP 315/3; ZG 350/3; ZG 350/4; ZG 400/3; ZG 400/4; ZGD 400/3; ZGF 350/2; ZGF 400/2; ZGU 350/3; ZGU 350/4; ZGU 400/3; ZGU 400/4; ZS 350/3; ZS 350/4; ZS 400/3; ZS 400/4; ZSU 350/3; ZSU 350/4; ZSU 400/3; ZSU 400/4 KFD 400/3; KFD 500/3; KFD 630/3; KFD 800/3; KFD-E 400/3; KFD-HE 400/3; 233047 piece M20x40 KFD-HS 400/3; KFD-HS 500/3; KFL 500/3; KFL 600/3; ZG 500/3; ZG 500/4; ZG 630/3; ZG 630/4; ZGD 500/3; ZGU 500/3; ZGU 500/4; ZGU 630/3; ZGU 630/4; ZS 500/3; ZS 500/4; ZS 630/3; ZS 630/4; ZSU 500/3; ZSU 500/4; ZSU 630/3; ZSU 630/4 KFD 1000/3; KFD 1250/3; KFD 1400/3; KFD 1600/3 249255 piece M24x70 within 4 weeks 35

RÖHM Outward stepped jaw (inside jaw), hardened RÖHM Tool group 09 Type 300 Inside jaw DIN 6350, set, outward stepped jaw, hardened huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D E F Weight approx. kg KRF 70/3; ZG 74/3 110154 1) 149305 32 10 23 4,7 4 4,5 0,09 ZG 80/3; ZG 85/3; ZG Hi-Tru 80/3; 110155 110063 37 12 26 4,8 4,5 4,5 0,05 ZS 80/3 KRF 110/3; ZG 100/3; ZG 110/3; 110156 110064 48 14 33,5 6,3 6 6,0 0,3 ZG Hi-Tru 100/3; ZS 100/3 KRF 125/3; KRF 125/6; ZG 125/3; 110157 110065 52 18 41,5 7,3 7 6,0 0,6 ZG Hi-Tru 125/3; ZS 125/3 ZG 140/3; ZS 140/3 110158 110066 61 18 41,5 8,3 7 6,0 0,22 KRF 160/3; KRF 160/6; ZG 160/3; 110159 110067 61 18 47,5 8,3 7 8,0 0,75 ZG Hi-Tru 160/3; ZS 160/3 KRF 200/3; KRF 200/6; ZG 200/3; 110160 110068 69 20 53,5 8,3 8 8,0 0,9 ZG Hi-Tru 200/3; ZS 200/3 KRF 250/6; ZG 250/3; ZG Hi-Tru 250/3; 110161 110069 90 24 67,5 10,3 10 10,0 0,7 ZS 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 110162 110070 130 34 79,5 11,3 15 10,0 1,8 ZG 350/3; ZG 400/3; ZS 350/3; 110163 110071 130 34 79,5 11,3 15 10,0 1,8 ZS 400/3 ZG 500/3; ZG 630/3; ZS 500/3; ZS 630/3 110164 110072 190 42 95 14,9 15 10,0 3,8 1) Reversible, for use as turning or inside jaws Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please send us the chuck. 36 within 4 weeks

Inward stepped jaws (outside jaws) D, hardened RÖHM RÖHM Tool group 09 Type 300 Outside jaw D DIN 6350, set, inward stepped jaw, hardened huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D E F Weight approx. kg ZG 80/3; ZG 85/3; ZG Hi-Tru 80/3; ZS 80/3 110165 110073 37 12 26 4,8 4,5 4,5 0,05 KRF 110/3; KRF 70/3; ZG 100/3; ZG 110/3; 110166 110074 48 14 33,5 6,3 6 6,0 0,3 ZG Hi-Tru 100/3; ZS 100/3 KRF 125/3; KRF 125/6; ZG 125/3; 110167 110075 52 18 41,5 7,3 7 6,0 0,6 ZG Hi-Tru 125/3; ZS 125/3 ZG 140/3; ZS 140/3 110168 110076 61 18 41,5 8,3 7 6,0 0,22 KRF 160/3; KRF 160/6; ZG 160/3; 110169 110077 61 18 47,5 8,3 7 8,0 0,75 ZG Hi-Tru 160/3; ZS 160/3 KRF 200/3; KRF 200/6; ZG 200/3; 110170 110078 69 20 53,5 8,3 8 8,0 0,9 ZG Hi-Tru 200/3; ZS 200/3 KRF 250/6; ZG 250/3; ZG Hi-Tru 250/3; 110171 110079 90 24 67,5 10,3 10 10,0 0,7 ZS 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 110016 110080 130 34 79,5 11,3 15 10,0 1,8 ZG 350/3; ZG 400/3; ZS 350/3; ZS 400/3 110017 110081 130 34 79,5 11,3 15 10,0 1,8 ZG 500/3; ZG 630/3; ZS 500/3; ZS 630/3 110018 110082 190 42 95 14,9 15 10,0 3,8 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please send us the chuck. within 4 weeks 37

Unstepped jaws (soft block jaws) L, can be hardened RÖHM RÖHM Tool group 09 Type 301 Unstepped jaw L DIN 6350, set, unstepped, soft, 16Mnr5 huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height F Weight approx. kg KRF 70/3; ZG 74/3 109114 1) 149304 32 10 23 4,5 0,15 ZG 80/3; ZG 85/3; ZG Hi-Tru 80/3; ZS 80/3 107588 107598 37 12 26 4,5 0,08 KRF 110/3; ZG 100/3; ZG 110/3; 107589 107599 48 14 33,5 6,0 0,45 ZG Hi-Tru 100/3; ZS 100/3 KRF 125/3; KRF 125/6; ZG 125/3; 107590 107600 52 18 41,5 6,0 0,81 ZG Hi-Tru 125/3; ZS 125/3 ZG 140/3; ZS 140/3 107591 107601 61 18 41,5 6,0 0,32 KRF 160/3; KRF 160/6; ZG 160/3; 107592 107602 61 18 47,5 8,0 1,14 ZG Hi-Tru 160/3; ZS 160/3 KRF 200/3; KRF 200/6; ZG 200/3; 107593 107603 69 20 53,5 8,0 1,56 ZG Hi-Tru 200/3; ZS 200/3 KRF 250/6; ZG 250/3; ZG Hi-Tru 250/3; 107594 107604 90 24 67,5 10,0 1 ZS 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 107595 107605 130 34 79,5 10,0 2,4 ZG 350/3; ZG 400/3; ZS 350/3; ZS 400/3 107596 107644 130 34 79,5 10,0 2,4 ZG 500/3; ZG 630/3; ZS 500/3; ZS 630/3 107597 107645 190 42 95 10,0 5,2 1) jaws reversible 38 within 4 weeks

ase jaws G, hardened RÖHM RÖHM Tool group 09 Type 302 ase jaw G DIN 6350, set, with fixing screw huck Type 3-jaw set 4-jaw set Jaw length Jaw width D E F H J metr. J UN L M N O Grooves Tapped holes Weight approx. kg ZG 100/3; ZG 110/3; ZG Hi-Tru 100/3; 107500 107542 46 14 19,5 9,5 6 6,0 24 M6 ¼ -20 19,25-7,94 2,5 1 2 0,06 ZGU 100/3; ZGU 110/3; ZS 100/3; ZSU 100/3 ZG 125/3; ZG Hi-Tru 125/3; 107501 107543 55 18 24 12,68 7,6 6,0 32 M8 5/16-18 22,6-7,94 3,1 1 2 0,12 ZGU 125/3; ZS 125/3; ZSU 125/3 ZG 140/3; ZGU 140/3; ZS 140/3; 107502 107544 65 18 27 12,68 7,6 6,0 38,1 M8 3/8-16 28,5-7,94 3,1 1 2 0,17 ZSU 140/3 ZG 160/3; ZG Hi-Tru 160/3; ZGU 160/3; ZS 160/3; ZSU 160/3 107503 107545 65 18 27 12,68 7,6 8,0 38,1 M8 3/8-16 28,5-7,94 3,1 1 2 0,17 ZG 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 107504 107546 78 20 28 12,68 7,6 8,0 44,45 M8 3/8-16 34,9-7,94 3,1 1 2 0,22 ZG 250/3; ZG Hi-Tru 250/3; 107505 107547 92 24 35 19,03 7,6 10,0 54 M12 ½ -13 39,7-12,7 3,1 1 2 0,4 ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; 107506 107548 108 34 40 19,03 7,6 10,0 63,5 M12 ½ -13 47,6-12,7 3,1 1 2 0,78 ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; 107507 107549 127 34 45 19,03 10,8 10,0 76,2 M16 5/8-11 57,1-12,7 3,1 1 2 1 ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZGU 500/3; ZS 500/3; 107508 107550 165 42 49 19,03 10,8 10,0 38,1 M20 ¾ -10 57,1 38,1 12,7 3,1 2 4 1,72 ZSU 500/3 ZG 630/3; ZGU 630/3; ZS 630/3; 107509 107551 203 42 49 19,03 10,8 10,0 38,1 M20 ¾ -10 57,1 38,1 12,7 3,1 3 5 2,1 ZSU 630/3 ZGU 700/3; ZSU 700/3 115098 141621 253 55 62 19,03 10,8 20,0 38,1 ¾ -10 M20 57,1 38,1 12,7 3,1 4 6 6,2 ZGU 800/3; ZSU 800/3 105272 141616 291 55 62 19,03 10,8 20,0 38,1 ¾ -10 M20 57,1 38,1 12,7 3,1 5 7 7,1 ZGU 1000/3; ZSU 1000/3 105274 141611 329 55 62 19,03 10,8 20,0 38,1 ¾ -10 M20 57,1 38,1 12,7 3,1 6 8 8 ZGU 1250/3; ZSU 1250/3 105275 141614 367 55 62 19,03 10,8 20,0 38,1 ¾ -10 M20 57,1 38,1 12,7 3,1 7 9 9 within 4 weeks 39

RÖHM Reversible top jaws U, hardened RÖHM Tool group 09 Type 303 Reversible top jaws U DIN 6350, set, hardened huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height E G H J K R Weight approx. kg ZG 100/3; ZG 110/3; ZG Hi-Tru 100/3; 108045 108053 47 22 29,5 7,96 9,5 19,25 12 24 6 0,12 ZGU 100/3; ZGU 110/3; ZS 100/3; ZSU 100/3 ZG 125/3; ZG Hi-Tru 125/3; ZGU 125/3; 108046 108054 56 26 37,5 7,96 12,68 22,6 13 32 8 0,19 ZS 125/3; ZSU 125/3 ZG 140/3; ZG 160/3; ZG Hi-Tru 160/3; ZGU 140/3; ZGU 160/3; ZS 140/3; ZS 160/3; ZSU 140/3; ZSU 160/3 107936 107938 66,7 28 41,5 7,96 12,68 28,5 15,8 38,1 9 1) / 10,5 2) 0,27 ZG 200/3; ZGD 200/3; ZG Hi-Tru 200/3; 107937 107939 79,5 30 42,5 7,96 12,68 34,9 19 44,45 9 1) / 10,5 2) 0,39 ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZGD 250/3; ZG Hi-Tru 250/3; 108049 108057 95,3 36 52,5 12,72 19,03 39,7 22,2 53,95 14 0,66 ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZGD 315/3; ZG Hi-Tru 315/3; 108050 108058 109,5 42 57,5 12,72 19,03 47,6 25,4 63,5 15 1,02 ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGD 400/3; 108051 108059 127 42 64,5 12,72 19,03 57,1 28,5 76,2 15 1,27 ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGD 500/3; 108052 108060 127 50 79,5 12,72 19,03 57,1 28,5 76,2 20 2 ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 ZGU 700/3; ZGU 800/3; ZSU 700/3; 105081 105085 210 68 89 12,72 19,03 57,1 28,5 76,2 22 4,45 ZSU 800/3 ZGU 1000/3; ZGU 1250/3; 105098 105101 210 68 110 12,72 19,03 57,1 28,5 76,2 25 6,1 ZSU 1000/3; ZSU 1250/3 1) with M8 2) with 3 / 8 mounting dimensions to ISO 3442 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please send us the chuck. 40 within 4 weeks

Soft top jaws RÖHM RÖHM Tool group 09 Type 302 Unstepped top jaw DIN 6350, set, soft, material 16Mnr5 huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height G L T Weight approx. kg ZG 100/3; ZG 110/3; ZG Hi-Tru 100/3; ZGU 100/3; ZGU 110/3; ZS 100/3; ZSU 100/3 ZG 125/3; ZG Hi-Tru 125/3; ZGU 125/3; ZS 125/3; ZSU 125/3 ZG 140/3; ZG 160/3; ZG Hi-Tru 160/3; ZGU 140/3; ZGU 160/3; ZS 140/3; ZS 160/3; ZSU 140/3; ZSU 160/3 ZG 200/3; ZGD 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZGD 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZGD 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGD 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGD 500/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 ZGU 700/3; ZGU 800/3; ZSU 700/3; ZSU 800/3 ZGU 1000/3; ZGU 1250/3; ZSU 1000/3; ZSU 1250/3 107633 107641 53 22,5 30 9,5 6,6 15 0,21 107634 107642 62 26,5 38 12,68 9 16 0,34 108581 108583 74 28,5 42 12,68 9 19,5 0,5 108582 108584 87 30,5 43 12,68 9 22,8 0,7 107637 107579 103 36,5 53 19,03 14 26 1,2 107638 107580 120 42,5 58 19,03 14 30,7 1,86 107639 107581 137 42,5 65 19,03 18 33,55 2,18 107640 107582 140 50,5 80 19,03 22 35 3,04 105103 105105 210 68 89 19,03 22 41,5 8 105107 105109 210 68 110 19,03 22 41,5 10,8 within 4 weeks 41

lock jaws in extended design, can be hardened RÖHM RÖHM Tool group 09 Type 301 lock jaws L, set, in extended design, soft, 16Mnr5, DIN 6350 huck Type 3-jaw set 4-jaw set Jaw length 1 X1 max. Length standard jaw J X max. ZG 200/3; ZG Hi-Tru 200/3; ZS 200/3 130031 137073 100 50 69 32,5 19 ZG 250/3; ZG Hi-Tru 250/3; ZS 250/3 132658 137074 120 56 90 41 26 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 132184 129894 160 70 130 46 40 ZG 350/3; ZG 400/3; ZS 350/3; 137075 130442 160 70 130 42 40 ZS 400/3 ZG 500/3; ZG 630/3; ZS 500/3; 131540 137076 220 80 190 55 50 ZS 630/3 ZG 200/3; ZG Hi-Tru 200/3; ZS 200/3 130033 137077 120 70 69 32,5 19 ZG 250/3; ZG Hi-Tru 250/3; ZS 250/3 128880 130610 140 76 90 41 26 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 118908 137078 200 110 130 46 40 ZG 350/3; ZG 400/3; ZS 350/3; 137079 137080 200 110 130 42 40 ZS 400/3 ZG 500/3; ZG 630/3; ZS 500/3; 137081 137082 280 140 190 55 50 ZS 630/3 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 121367 133691 250 160 130 46 40 ZG 350/3; ZG 400/3; ZS 350/3; ZS 400/3 137087 137088 250 160 130 42 40 42 within 4 weeks

lock jaws in heightened design, can be hardened RÖHM RÖHM Tool group 09 Type 301 lock jaws L, set, in heightened design, soft, 16Mnr5, DIN 6350 huck Type 3-jaw set 4-jaw set Jaw heigth 1 J1 Height standard jaw J ZG 200/3; ZG Hi-Tru 200/3; ZS 200/3 125710 132972 80 58,5 54 32,5 ZG 250/3; ZG Hi-Tru 250/3; ZS 250/3 122188 134796 100 73 68 41 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 132186 137091 110 76 80 46 ZG 350/3; ZG 400/3; ZS 350/3; 137092 131655 110 72 80 42 ZS 400/3 ZG 500/3; ZG 630/3; ZS 500/3; 137093 137094 150 110 95 55 ZS 630/3 ZG 200/3; ZG Hi-Tru 200/3; ZS 200/3 125712 137095 120 98,5 54 32,5 ZG 250/3; ZG Hi-Tru 250/3; ZS 250/3 122189 130630 130 103 68 41 ZG 315/3; ZG Hi-Tru 315/3; ZS 315/3 137096 137097 140 106 80 46 ZG 350/3; ZG 400/3; ZS 350/3; 137098 137099 140 102 80 42 ZS 400/3 ZG 500/3; ZG 630/3; ZS 500/3; 125117 137100 200 160 95 55 ZS 630/3 ZG 200/3; ZG Hi-Tru 200/3; ZS 200/3 125714 137101 150 128,5 54 32,5 ZG 250/3; ZG Hi-Tru 250/3; ZS 250/3 137102 137103 150 123 68 41 ZG 315/3; ZG 315/4; ZG Hi-Tru 315/3; ZS 315/3 ZG 350/3; ZG 350/4; ZG 400/3; ZG 400/4; ZS 350/3; ZS 400/3 137104 130340 160 126 80 46 132879 110109 160 122 80 42 within 4 weeks 43

Top jaws in extended design, can be hardened RÖHM RÖHM Tool group 09 Type 302 Top jaws, set, in extended design, soft, 16Mnr5, DIN 6350 huck Type 3-jaw set 4-jaw set Jaw length 1 X1 max. F Length standard jaw X max. ZG 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 ZG 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 110086 148139 100 43 6,8 87 30 112122 129289 130 63 8 103 36 110624 143764 160 76 5,5 120 36 110626 141277 160 53 8,5 137 30 103014 103393 170 75 8,5 140 45 112120 148657 120 63 6,8 87 30 125428 128700 150 83 8 103 36 112091 147754 200 116 5,5 120 36 112118 141263 200 93 8,5 137 30 110632 148234 220 125 8,5 140 45 104710 146013 180 113 8 103 36 112089 147860 250 166 5,5 120 36 103654 149974 260 153 8,5 137 30 112127 148235 280 185 8,5 140 45 44 within 4 weeks

Top jaws in heightened design, can be hardened RÖHM RÖHM Tool group 09 Type 302 Top jaws, set, in heigthened design, soft, 16Mnr5, DIN 6350 huck Type 3-jaw set 4-jaw set Jaw height 1 Height standard jaw F ZG 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 ZG 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 132155 132181 60 43 6,8 119645 135867 70 53 8 110435 149975 80 58 5,5 126385 118373 90 65 8,5 128590 149985 100 80 8,5 128564 149976 80 43 6,8 128571 134999 100 53 8 110437 129691 110 58 5,5 110628 135426 120 65 8,5 110630 149977 130 80 8,5 128573 149978 150 53 8 128569 141671 150 58 5,5 128567 139591 160 65 8,5 128588 140427 160 80 8,5 within 4 weeks 45

Top jaws in heightened and wide design, can be hardened RÖHM RÖHM Tool group 09 Type 302 Top jaws, set, in heightened and wide design, soft, 16Mnr5, DIN 6350 huck Type 3-jaw set 4-jaw set Jaw width 1 1 Width standard jaw ZG 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 ZG 500/3; ZG 630/3; ZGU 500/3; ZGU 630/3; ZS 500/3; ZS 630/3; ZSU 500/3; ZSU 630/3 ZG 200/3; ZG Hi-Tru 200/3; ZGU 200/3; ZS 200/3; ZSU 200/3 ZG 250/3; ZG Hi-Tru 250/3; ZGU 250/3; ZS 250/3; ZSU 250/3 ZG 315/3; ZG Hi-Tru 315/3; ZGU 315/3; ZS 315/3; ZSU 315/3 ZG 350/3; ZG 400/3; ZGU 350/3; ZGU 400/3; ZS 350/3; ZS 400/3; ZSU 350/3; ZSU 400/3 105057 105061 40 70 30.5 43 137090 141338 50 80 36.5 53 143053 149979 60 90 42 58 131567 149980 60 90 42.5 65 137084 149981 80 110 50.5 80 133259 149982 50 80 30.5 43 133653 137526 60 90 36.5 53 143057 149983 80 110 42 58 137086 149984 80 110 42.5 65 46 within 4 weeks

Reversible top jaws U, hardened for EG-ES RÖHM RÖHM Tool group 09 Type 350 Reversible top jaws U, set, hardened huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D E G H J metr. Weight approx. kg EG 100/3; EG 125/3 110117 110123 56 18 41,5 8,7 7 35 8 Tr14x3 0,18 EG 160/3; ES 160/3 110118 110124 69 20 50 9,7 8 43 10 Tr16x4 0,3 EG 200/3; EG 200/4; ES 200/3 139666 139670 85 24 57,5 9,7 10 54 12 Tr18x2 0,53 EG 250/3; ES 250/3 139667 139671 90 24 67,5 9,7 10 56 14 Tr18x2 0,7 EG 315/3; EG 400/3; ES 315/3; ES 400/3 EG 500/3; EG 630/3; ES 500/3; ES 630/3 139668 139672 130 34 79,5 11,15 15 85 15 Tr20x2 1,7 139669 139673 190 42 95 15 15 120 20 Tr26x3 3,7 within 4 weeks 47

RÖHM Unstepped jaws (soft block jaws) L, can be hardened for EG-ES RÖHM Tool group 09 Type 351 Unstepped jaws L, set, unstepped, soft huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height J metr. Weight approx. kg EG 100/3; EG 125/3 107668 107674 56 18 41,5 Tr14x3 0,18 EG 160/3; ES 160/3 107669 107675 69 20 50 Tr16x4 0,3 EG 200/3; EG 200/4; ES 200/3 139674 139678 85 24 57,5 Tr18x2 0,53 EG 250/3; ES 250/3 139675 139679 90 24 67,5 Tr18x2 0,7 EG 315/3; EG 400/3; ES 315/3; ES 400/3 EG 500/3; EG 630/3; ES 500/3; ES 630/3 139676 139680 130 34 79,5 Tr20x2 1,7 139677 139681 190 42 95 Tr26x3 3,7 48 within 4 weeks

ase jaws G, hardened for EG-ES RÖHM RÖHM Tool group 09 Type 350 ase jaws G, set, hardened huck Type 3-jaw set 4-jaw set Jaw length Jaw width Jaw height F EG 100/3 107652 107660 50 24 13,3 6,0 EG 125/3 107653 107661 50 24 13,3 6,0 EG 160/3; ES 160/3 107654 107662 62 26 15,3 8,0 EG 200/3; EG 200/4; ES 200/3 139682 139686 78 30 17,8 8,0 EG 250/3; ES 250/3 139683 139687 86 30 17,8 10,0 EG 315/3; ES 315/3 139684 139688 118 44 22,7 10,0 EG 400/3; ES 400/3 139685 139689 118 44 22,7 10,0 EG 500/3; EG 630/3; ES 500/3; ES 630/3 107659 107667 176 54 25 10,0 within 4 weeks 49

In this jaw-catalogue RÖHM presents the comprehensive clamping jaw program. large number of jaw types offer nearly all possibilities of clamping in lathe chucks, independent chucks and power chucks for both, the industrial and the artisan production. 50 Find your clamping jaw quickly and simply at www.jawfinder.biz

Schunk Schunk Soft top jaws, serration 90 52 Soft top jaws, without mounting holes, serration 90 53 Soft top jaws, serration 60 54 Soft top jaws, tongue and groove, 120 bevelled 56 Soft top jaws, tongue and groove, for key bar chucks 57 Reversible top jaws, hardened, serration 60 58 Reversible top jaws, hardened, tongue and groove 59 ase jaws G, hardened, diagonally toothing 60 Soft one-piece jaws L, diagonally toothing 61 One-piece reversible jaws E, hardened, diagonally toothing 62 Draw-down jaws N, diagonally toothing 63 ase jaws GG, hardened, straight toothing 65 Soft one-piece jaws LG, straight toothing 66 One-piece reversible jaws EG, hardened, straight toothing 67 Draw-down jaws NG, straight toothing 68 law-type jaws, hardened, serration 90 70 law-type jaws, hardened, serration 60 71 law-type jaws, hardened, tongue and groove 72 Soft segment top jaws, serration 60 73 Errors and corrections are reserved! 51

Soft top jaws, serration 90 Schunk G F G G F Q D +0,05 30 o p 537-02 = 3 mm Schunk Tool group 21 Type 543/538 Soft top jaws, set, can be hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G Q Serration Weight approx. kg ROT ND 132-32 045794 046402 046450 53 22,5 30 10 20 12 3 1/16 x 90 0,223 ROT ND 165-46 045795 046403 046451 55 26,5 38 12 31 15-1/16 x 90 0,32 ROT N 165; ROT ND 185-54; ROT NF 165 ROT NF plus 185-52; ROT NK plus 165-45; ROT N plus 185-52; ROT NR 250; ROT NR 315; ROT TP 160-38 ROT N 210; ROT ND 185-54; ROT ND 215-66; ROT NF 210; ROT NF plus 215-66; ROT NK plus 210-52; ROT NK plus 250-75; ROT NO 210; ROT N plus 215-66; ROT TP 200-52 ROT N 400-120; ROT N 500-160; ROT ND 400-165; ROT ND 500-165; ROT NF 500-160; ROT NO 400; ROT NO 500 ROT N 210; ROT ND 185-54; ROT ND 215-66; ROT NF 210; ROT NF plus 215-66; ROT NK plus 210-52; ROT NK plus 250-75; ROT NO 210; ROT N plus 215-66; ROT TP 200-52 133147 133152 133157 66,7 36,5 53 17 36 19-1/16 x 90 0,7-585017 - 70 32,5 40 14 5 1/16 x90 1,7 133148 133153 133158 75 36,5 53 17 44 19-1/16 x 90 0,88-118000 - 75 36,5 53 17 41 22-1/16 x90 2,7-461712 - 75 36,5 65 17 44 19-1/16 x90 3,4-585021 - 90 36,5 40 17 47 23 5 1/16 x90 2,7-894365 - 90 40 60 17 43 22 5 1/16 x90 4,2 ROT N 250; ROT N 315; ROT ND 255-86; ROT ND 315-115; ROT NF 250; ROT NF 315; ROT NF plus 260-86; ROT NF plus 315-104; ROT NK plus 315-91; ROT NO 260; ROT NO 315; ROT N plus 260-86; ROT N plus 315-104; ROT TP 250-68; ROT TP 315-105; ROT TP 315-90 - 894357-98 35 40 17 61 22-1/16 x90 2,9 133149 133154 133159 95 45 54,5 21 55 25-1/16 x 90 1,4-585531 - 110 50 55,5 21 60 30-1/16 x90 6,3 133150 133155 133160 103 50 80 21 62 25-1/16 x 90 2,58-894366 - 120 50 80 21 62 28-1/16 x90 8,9 ROT N 400-120; ROT N 500-160; ROT ND 400-165; ROT ND 500-165; ROT NF 400-120; ROT NF 500-160; ROT NO 400; ROT NO 500 133151 133156 133161 130 50 80 25,5 79 31-3/32 x 90 3,1-118004 - 130 50 80 25,5 20 35-3/32 x90 3,1 52 within 4 weeks

Soft top jaws, without mounting holes, serration 90 Schunk Tool group 21 Type 543-28 Soft top jaws, piece, without mounting holes, can be hardened, serration 90 - material: 16 Mnr 5 Schunk huck Type Item no. Jaw length Jaw width Jaw height D Serration Weight approx. kg ROT ND 132-32 883005 52 26,5 38 10 1/16 x90 0,4 ROT ND 165-46 631327 55 26,5 38 12 1/16 x90 0,4 ROT 2 160; ROT N 165; 667392 90 36,5 53 17 1/16 x90 1,3 ROT ND 185-54; ROT NF 165 ROT 2 160; ROT N 165; ROT N 210; ROT ND 185-54; 155423 105 36,5 53 17 1/16 x90 1,5 ROT ND 215-66; ROT NF 165; 681620 ROT NF 210; ROT NF plus 215-66; 120 36,5 53 17 1/16 x90 1,7 ROT NK plus 210-52; ROT NO 210; ROT N plus 215-66; ROT TP 200-52 ROT 2 160; ROT N 165; 155424 90 45 54,5 17 1/16 x90 1,7 ROT ND 185-54; ROT NF 165 ROT 2 160; ROT N 165; 155425 105 45 54,5 17 1/16 x90 2 ROT N 210; ROT ND 185-54; ROT ND 215-66; ROT NF 165; ROT NF 210; ROT NF plus 215-66; ROT NK plus 210-52; ROT NO 210; ROT N plus 215-66; ROT TP 200-52 ROT N 210; ROT ND 215-66; 155426 120 45 54,5 17 1/16 x90 2,2 ROT NF 210; ROT NF plus 215-66; ROT NK plus 210-52; ROT NO 210; ROT N plus 215-66; 155427 90 50 80 17 1/16 x90 2,6 ROT TP 200-52 ROT 2 200; ROT N 250; ROT N 315; ROT ND 255-86; 155428 120 45 54,5 21 1/16 x90 2,2 ROT ND 315-115; ROT NF 250; 155429 ROT NF 315; ROT NF plus 260-86; 150 45 54,5 21 1/16 x90 2,7 ROT NF plus 315-104; ROT NK plus 315-91; 667208 120 50 80 21 1/16 x90 3,5 ROT NO 260; ROT NO 315; ROT N plus 260-86; ROT N plus 315-104; 155430 150 50 80 21 1/16 x90 4,4 ROT TP 250-68; ROT TP 315-90 ROT N 400-120; ROT N 500-160; 155431 155 50 80 25,5 1/16 x90 4,4 ROT ND 400-165; ROT ND 500-165; ROT NF 400-120; 155432 155 68 89 25,5 1/16 x90 7 ROT NF 500-160; ROT NO 400 155433 155 68 89 25,5 1/16 x90 8,7 within 4 weeks 53

Soft top jaws, serration 60 Schunk G F D H7 4,5 Schunk Tool group 21 Type 543-32 Soft top jaws, 3-jaw set, can be hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G Serration Weight approx. kg ROT N 165; ROT ND 165-46; 154865 72 30,5 43 12 37 20 1,5 x 60 0,5 ROT ND 185-54; ROT NF 165; ROT NF plus 185-52; ROT NK 165; ROT NK plus 165-45 ROT N 210; ROT ND 215-66; 154867 95 35 45,5 14 46 25 1,5 x 60 0,9 ROT NF 210; ROT NK 210; ROT NK plus 210-52; ROT N plus 215-66 ROT N 250; ROT ND 255-86; 154869 110 50 45 16 50 30 1,5 x 60 1,7 ROT NF 250; ROT NF plus 260-86; ROT NK 250; ROT NK plus 250-75; ROT N plus 260-86 ROT ND 315-115; ROT NF plus 315-104; ROT NK 315; ROT NK plus 315-91; ROT N plus 315-104 154871 130 50 55,5 21 52 30 1,5 x 60 1,9 54 within 4 weeks

Schunk Soft top jaws, serration 60 D +0,05 M F G G F D +0,05 Tool group 21 Type 530 Soft top jaws, set, can be hardened, serration 60 - material: 16 Mnr 5 30 o Schunk huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G Serration Weight approx. kg ROT ND 315-115; ROT NF plus 315-104; ROT NK 315; ROT NK plus 315-91; ROT N plus 315-104 046442 046421 120 50 80 21 67 28 1,5 x 60 3,125 Special Jaws for Lathe hucks High flexibility and individual clamping options With our own construction department and production we are the perfect partner concerning gripping solutions and clamping problems. For designing the various styles and forms we rely on our experience of more than 100 years. Drill hucks Live enters Lathe hucks Vices utomation Technology Power huck Technology Mandrels Tool lamping Systems Special Design www.roehm.biz within 4 weeks 55

Soft top jaws, tongue and groove, 120 bevelled Schunk 538-00 M +0,03 Schunk Q 538-12 D 0,03 Tool group 21 Type 549/538 Soft top jaws, set, can be hardened, tongue and groove 120 bevelled, material: 16 Mnr 5 G 30 o huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Q Weight approx. kg ROT NO 165 123359 123358 72,7 36,5 53 10 32,2 25 16 3 0,72 ROT 2 250; ROT NO 260 123434 123433 115,3 45 54,5 20 58,3 40 16 6 1,55 ROT 2 315; ROT NO 315 129847 129849 146 50 80 20 63,5 50 16 6 3,6 56 within 4 weeks

Schunk Soft top jaws, tongue and groove, for key bar chucks Tool group 28 Type 002 Unstepped top jaw, 3-jaw set, standard design, soft, material 16Mnr5 Schunk huck Type 3-jaw set Jaw length Jaw width Jaw height D F G H K ROT-G 160; ROT NR 200; ROT-S plus 160-42; ROT-S plus 2.0 160-42; ROT THW 165-43; ROT THW plus 165-43; ROT THW plus 185-52 ROT-G 200-62; ROT-S plus 2.0 200-52; ROT-S plus 200-52; ROT THW 210; ROT THW 210-52; ROT THW plus 215-66; ROT THW vario 215-62 ROT-G 250-82; ROT-G 315-102; ROT-S plus 2.0 250-62; ROT-S plus 250-62; ROT THW 250; ROT THW 265; ROT THW 315; ROT THW 265-71; ROT THW plus 260-81; ROT THW plus 315-104 ROT-G 400-122; ROT-S plus 2.0 315-92; ROT-S plus 315-92; ROT THW 315; ROT THW 400-120; ROT THW 315-86 094008 85 20,3 41 8 36,5 42 18 32 137055 1) 85 24,4 47 8 42,5 42 18 32 094009 105 22 45 10 40 50 20 40 137056 1) 105 34,3 56 10 51 50 20 40 094010 125 30,4 55 12 50 70 20 40 137057 1) 125 50,5 80 12 75 70 20 40 094011 145 34,3 56 12 50 74 26 54 137058 1) 145 50,5 80 12 74 74 26 54 618098 145 34,3 80 12 75 74 26 54 ROT-G 500-162; ROT-S plus 400-102; ROT-S plus 500-162; ROT THW 500-128; ROT THW 630-160; ROT THW 800; ROT THW 400-120; ROT THW 500-128 ROT-G 630-252; ROT-S plus 630-252; ROT-S plus 800-252 1) larger design 094046 180 50,5 80 18 73 100 30 60 140716 260 68 110 24 102 150 40 82 within 4 weeks 57

Schunk Reversible top jaws, hardened, serration 60 G G D H7 Schunk M Tool group 21 Type 543-31 Reversible top jaws, 3-jaw set, hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg ROT N 165; ROT ND 165-46; ROT ND 154674 1) 66 34,7 36 12 12,5 20 12 1,5 x 60 0,3 185-54; ROT NF 165; ROT NF plus 185-52; ROT NK 165; ROT NK plus 165-45 ROT N 210; ROT ND 215-66; 154676 81 36 49 14 17,5 25 12 1,5 x 60 0,6 ROT NF 210; ROT NF plus 215-66; ROT NK 210; ROT NK plus 210-52; ROT N plus 215-66 ROT N 250; ROT ND 255-86; 154678 99,5 44,5 54 16 25,5 30 13 1,5 x 60 1,2 ROT NF 250; ROT NF plus 260-86; ROT NK 250; ROT NK plus 250-75; ROT N plus 260-86 ROT ND 315-115; ROT NF plus 315-104; 154816 1) 103 50 55,5 21 22,5 30 17 1,5 x 60 1,5 ROT NK 315; ROT NK plus 315-91; ROT N plus 315-104 1) one step only Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. 58 within 4 weeks

Reversible top jaws, hardened, tongue and groove Schunk K = = N O F Tool group 36 Type 530 Reversible top jaws, 3-jaw set, hardened, tongue and groove, for external and internal chucking - material: 16 Mnr 5 H D Schunk huck Type 3-jaw set Jaw length Jaw width Jaw height D F H K N O ROT-G 160; ROT-S plus 160-42; ROT-S plus 2.0 160-42; ROT THW 165-43; ROT THW plus 165-43; ROT THW plus 185-52 332774 61,5 20,4 37 8 32,7 18 32 17,7 25,2 137047 62 24,4 40 8 35,7 18 32 17,7 25,7 094012 61,5 20,4 37 8 32,5 18 32 17,5 25 ROT-G 200-62; ROT-S plus 2.0 200-52; ROT-S plus 200-52; ROT THW 210; ROT THW 210-52; ROT THW plus 215-66; ROT THW vario 215-62 ROT-G 250-82; ROT-G 315-102; ROT-S plus 2.0 250-62; ROT-S plus 250-62; ROT THW 210; ROT THW 250; ROT THW 265; ROT THW 315; ROT THW 265-71; ROT THW plus 260-81; ROT THW plus 315-104 ROT-G 250-82; ROT-G 315-102; ROT-S plus 2.0 250-62; ROT-S plus 250-62; ROT THW 250; ROT THW 315; ROT THW 265-71; ROT THW plus 260-81; ROT THW plus 315-104 ROT-G 400-122; ROT-S plus 2.0 315-92; ROT-S plus 315-92; ROT THW 315; ROT THW 400-120; ROT THW 315-86 ROT-G 400-122; ROT-S plus 2.0 315-92; ROT-S plus 315-92; ROT THW 400-120; ROT THW 315-86 ROT-G 500-162; ROT-S plus 400-102; OT-S plus 500-162; ROT THW 500-128; ROT THW 630-160; ROT THW 800; ROT THW 400-120; ROT THW 500-128 ROT-G 630-252; ROT-S plus 1000-402; ROT-S plus 630-252; ROT-S plus 800-252 332775 70,5 24,4 42 10 38 20 40 18 28 137048 126 34,4 46 10 41 20 40 18 28 094013 70,5 24,4 43 10 38 20 40 18 28 332776 92 34,4 55 12 50 20 40 22 36 137049 92 35,7 59 12 54 20 40 22 36 094014 92 34,4 55 12 50 20 40 22 36 332777 107 37,5 61 12 56 26 54 26 41 137050 107 50,4 67 12 61 26 54 26 41 094015 107 35,7 62 12 56 26 54 26 41 332778 130 50,4 79 18 72 30 60 32 52 094045 130 50,4 79 18 72 30 60 32 52 747081 185 68 110 24 102 40 82 42 72 140715 185 68 110 24 102 40 82 42 72 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 59

H ase jaws G, hardened, diagonally toothing Schunk L F Schunk Tool group 28 Type 002 ase jaw G, 3-jaw set, with mounting bolts D huck Type 3-jaw set Jaw length Jaw width D F H L Weight approx. kg ROT-S plus 160-42; 094004 74 20 18 8 29,5 32 0,265 ROT-S plus 2.0 160-42 ROT-S plus 2.0 200-52; 094005 90 22 20 10 35 40 0,365 ROT-S plus 200-52; ROT THW 210 ROT-S plus 2.0 250-62; 094006 110 26 20 12 40 40 0,7 ROT-S plus 250-62; ROT THW 250; ROT THW 265 ROT-S plus 2.0 315-92; 094007 125 32 26 12 46 54 1,065 ROT-S plus 315-92; ROT THW 315; ROT THW 400-120 ROT-S plus 400-102; 094044 160 45 30 18 52,7 60 2,35 ROT-S plus 500-162; ROT THW 500-128 ROT-S plus 630-252 140194 230 65 40 24 62 82 5,665 60 within 4 weeks

Soft one-piece jaws L, diagonally toothing Schunk T Tool group 28 Type 000 Unstepped Jaw L, 3-jaw set, unstepped, soft, material 16Mnr5 Schunk huck Type 3-jaw set Jaw length Jaw width Jaw height T Weight approx. kg ROT-S plus 160-42; ROT-S plus 2.0 160-42 ROT-S plus 2.0 200-52; ROT-S plus 200-52; ROT THW 210 332763 84,5 20 45 24 1,41 332764 98,4 22 60 35 2,52 162560 98,4 22 80 55 3,5 643088 98,4 22 90 65 4 321444 98,4 22 95 70 4,2 ROT-S plus 2.0 250-62; ROT-S plus 250-62; ROT THW 250; ROT THW 265 332765 118,7 26 70 41 4,23 810394 118,7 26 80 51 5 162561 118,7 26 90 61 5,7 810396 118,7 26 100 71 6,4 616002 70 26 100 71 3,5 616000 115 26 130 101 8,5 695681 180 26 140 111 14,3 ROT-S plus 2.0 315-92; ROT-S plus 315-92; ROT THW 315; ROT THW 400-120 ROT-S plus 400-102; ROT-S plus 500-162; ROT THW 500-128 332766 136,6 32 79 44,5 7,3 249680 136,6 32 79 44,5 2,4 332767 173,6 45 93 54 15,7 249681 173,6 45 93 54 5 within 4 weeks 61

Schunk One-piece reversible jaws E, hardened, diagonally toothing Schunk J H G T Tool group 28 Type 000 One-piece jaw E, 3-jaw set, hardened huck Type 3-jaw set Jaw length Jaw width Jaw height G H J T Weight approx. kg ROT-S plus 160-42; ROT-S plus 2.0 160-42 ROT-S plus 2.0 200-52; ROT-S plus 200-52; ROT THW 210 ROT-S plus 2.0 250-62; ROT-S plus 250-62; ROT THW 250; ROT THW 265 ROT-S plus 2.0 315-92; ROT-S plus 315-92; ROT THW 315; ROT THW 400-120 ROT-S plus 400-102; ROT-S plus 500-162; ROT THW 500-128 332757 77,7 20 45 37,5 30 22,5 24 1,1 094000 77,7 20 45 37,5 30 22,5 24 0,5 332758 94,7 22 60 50 40 30 35 1,9 094001 94,7 22 60 50 40 30 35 0,635 332759 114 26 70 56-42 41 3,3 094002 114 26 70 56-42 41 1,135 332760 130 32 79 64-49 44,5 5,3 094003 130 32 79 64-49 44,5 1,835 332761 167 45 93 73-53 54 10,8 094043 167 45 93 73-53 54 3,665 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please send us the chuck. 62 within 4 weeks

Draw-down jaws N, diagonally toothing Schunk E M6 F D huck front side Tool group 21 Type 545-00 Draw-down jaws, 1 piece, without interchangeable clamping inserts, diagonally toothing Schunk huck Type Item no. Jaw length Jaw width Jaw height D E F Thread ROT-S plus 160-42; ROT-S plus 2.0 160-42 ROT-S plus 2.0 200-52; ROT-S plus 200-52; ROT THW 210 ROT-S plus 2.0 250-62; ROT-S plus 250-62; ROT THW 250 ROT-S plus 2.0 315-92; ROT-S plus 315-92; ROT THW 315; ROT THW 400-120 141037 84,4 20 43,5 15 11 22,5 M6 141038 84,4 20 43,5 15 32 22,5 M6 141039 98,4 22 47,5 15 12 22,5 M6 141040 98,4 22 47,5 15 48 22,5 M6 141041 118,7 26 58,5 20 12 29,5 M6 141042 118,7 26 58,5 20 58 29,5 M6 141043 136,4 32 63,9 20 12 29,5 M6 141044 136,4 32 63,9 20 72 29,5 M6 ROT-S plus 400-102; 141045 173,6 45 73,4 25 12 34,3 M6 ROT THW 500-128 ROT-S plus 400-102 141046 173,6 45 73,4 25 77 34,3 M6 ROT THW 500-128 141048 173,6 45 73,4 25 110 34,3 M6 Interchangeable clamping inserts Tool group 15 Type 545-60 Interchangeable clamping inserts, 1 piece, with claws Item no. Size Design ontents of delivery 151029 140 with claws piece 141049 160/200 with claws piece 141052 250/315 with claws piece 141055 400/500 with claws piece within 4 weeks 63

Interchangeable clamping inserts Schunk Tool group 15 Type 545-70 Interchangeable clamping inserts, 1 piece, with serrated toothing Item no. Size Design ontents of delivery 151039 140 with serrated toothing piece Schunk 141050 160/200 with serrated toothing piece 141053 250/315 with serrated toothing piece 141056 400/500 with serrated toothing piece Tool group 15 Type 545-80 Interchangeable clamping inserts, 1 piece, with heat treatable surface Item no. Size Design ontents of delivery 151040 140 with heat treatable surface piece 141051 160/200 with heat treatable surface piece 141054 250/315 with heat treatable surface piece 141057 400/500 with heat treatable surface piece Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 64 within 4 weeks

Schunk ase jaws GG, hardened, straight toothing L F H Tool group 21 Type 574-11 ase jaws, 3-jaw-set, hardened, straight toothing, with cylindrical screws DIN 912-12.9 D Schunk huck Type 3-jaw set Jaw length Jaw width D F H L Weight approx. kg ROT-G 160; ROT THW 165-43; 463548 65 20 18 8 27,5 32 0,7 ROT THW plus 165-43; ROT THW plus 185-52 ROT-G 200-62; ROT THW 210; 463549 85 22 20 10 29,5 40 1 ROT THW plus 215-66; ROT THW vario 215-62 ROT-G 250-82; ROT THW 250; 463550 104 26 20 12 37 40 1,8 ROT THW plus 260-81 ROT-G 315-102; ROT THW 315; 463551 115 32 20 12 43 40 2,7 ROT THW plus 315-104 ROT-G 400-122; ROT THW 400-120 463552 125 32 26 12 43 54 3 within 4 weeks 65

Soft one-piece jaws LG, straight toothing Schunk Schunk E T Tool group 21 Type 574-37 Soft one-piece jaws, 3-jaw set, can be hardened, straight toothing, guidance hardened and ground - material: 16 Mnr 5 D huck Type 3-jaw set Jaw length Jaw width Jaw height D E T Weight approx. kg ROT THW 165-43 463562 65 20 55 56 25 33 1,3 ROT-G 200-62; ROT THW 210 463563 84 22 65 67,5 27 38 2,2 ROT-G 250-82; ROT THW 250 463564 99 26 84 77 36 53 4,3 ROT-G 315-102; ROT THW 315 463565 121 32 90 93 41 54 6,7 ROT THW 400-120 463566 148 32 100 120 41 64 9,2 66 within 4 weeks

Schunk One-piece reversible jaws EG, hardened, straight toothing J H G T Tool group 21 Type 574-27 One-piece reversible jaws, 3-jaw set, hardened, straight toothing - material: 16 Mnr 5 Schunk huck Type 3-jaw set Jaw length Jaw width Jaw height G H J T Weight approx. kg ROT THW 165-43 463555 58 20 44 37 30 23 23 0,6 ROT-G 200-62; ROT THW 210 463556 75 22 51 43 35 27 26 1,3 ROT-G 250-82; ROT THW 250 463557 90 26 60 50 40 30 31 2 ROT-G 315-102; ROT THW 315 463558 117 32 66 56 46 36 32 3,4 ROT THW 400-120 463559 137 32 70 59 48 37 36 4,9 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 67

Draw-down jaws NG, straight toothing Schunk E M6 D Schunk F Tool group 21 Type 545-30 Draw-down jaws, for interchangeable clamping inserts, straight toothing, 1 piece, without clamping inserts huck Type Item no. Jaw length Jaw width Jaw height D E F Thread ROT THW 165-43 485522 65 20 43 15 11 22,5 M6 485523 72 20 43 15 30 22,5 M6 ROT-G 200-62; ROT THW 210 485524 85 22 47 15 12 22,5 M6 485525 95 22 47 15 45 22,5 M6 ROT-G 250-82; ROT THW 250 485526 104 26 58 20 12 29,5 M6 485527 104 26 58 20 50,5 29,5 M6 ROT-G 315-102; ROT THW 315 485528 115 32 63 20 12 29,5 M6 485529 123 32 63 20 61,5 29,5 M6 ROT THW 400-120 485530 125 32 63 20 12 29,5 M6 485531 134 32 63 20 67 29,5 M6 ROT THW 500-128 485532 160 45 81 20 12 34 M6 485533 160 45 81 25 96 34 M6 Interchangeable clamping inserts Tool group 15 Type 545-60 Interchangeable clamping inserts, 1 piece, with claws Item no. Size Design ontents of delivery 151029 140 with claws piece 141049 160/200 with claws piece 141052 250/315 with claws piece 141055 400/500 with claws piece 68 within 4 weeks

Interchangeable clamping inserts Schunk Tool group 15 Type 545-70 Interchangeable clamping inserts, 1 piece, with serrated toothing Item no. Size Design ontents of delivery 151039 140 with serrated toothing piece 141050 160/200 with serrated toothing piece 141053 250/315 with serrated toothing piece Schunk 141056 400/500 with serrated toothing piece Tool group 15 Type 545-80 Interchangeable clamping inserts, 1 piece, with heat treatable surface Item no. Size Design ontents of delivery 151040 140 with heat treatable surface piece 141051 160/200 with heat treatable surface piece 141054 250/315 with heat treatable surface piece 141057 400/500 with heat treatable surface piece Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 69

Schunk law-type jaws, hardened, serration 90 10 10 M M Schunk 1 / 16 x 90 o Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 12-25,5 D H7 huck Type Item no. Jaw length Jaw height D Thread ROT ND 165-46 144320 66 52 38 12 M6 144321 56 34 38 12 M6 144322 66 25 38 12 M6 ROT N 165; ROT N 210; ROT ND 165-46; ROT ND 215-66; ROT NF 165; ROT NF 210; ROT TP 200-52 137031 67 53 45 17 M6 137032 65 46 45 17 M6 137033 55 39 45 17 M6 137034 50 31 45 17 M6 137035 55 27 45 17 M6 137036 65 19 45 17 M6 137037 65 26 45 17 M6 137038 55 24 45 17 M6 137039 55 40 45 17 M6 ROT N 250; ROT N 315; ROT ND 255-86; ROT ND 315-115; ROT NF 250; ROT NF 315; ROT TP 250-68; ROT TP 315-90 137041 95 80 50 21 M6 137042 75 60 50 21 M6 137043 60 43 50 21 M6 137044 70 37 50 21 M6 137045 95 25 50 21 M6 137046 80 30 50 21 M6 ROT N 400-120; ROT N 500-160; ROT ND 400-165; ROT ND 500-165; ROT NF 400-120; ROT NF 500-160 137051 130 113 65 25,5 M6 137052 90 67 65 25,5 M6 137053 100 45 65 25,5 M6 137054 130 33 65 25,5 M6 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 147263 1 M5 5 7 139177 1 M5 8 7 298191 1 M5 10 7 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 70 within 4 weeks

law-type jaws, hardened, serration 60 Schunk 10 10 M M D H7 1,5 x 60 o Tool group 21 Type 543-33 law-type jaws, 1 piece, hardened, serration 60 - width of the groove 12 Schunk huck Type Item no. Jaw length Jaw height D Thread ROT NK 165; ROT NK plus 165-45 156025 67 53 45 12 M6 156027 65 46 45 12 M6 156029 55 40 45 12 M6 161189 55 24 45 12 M6 ROT NK 250; ROT NK plus 250-75 156099 95 80 50 16 M6 156101 75 60 50 16 M6 156103 60 43 50 16 M6 156105 70 37 50 16 M6 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 71

law-type jaws, hardened, tongue and groove Schunk 8 mm size 160/175 D 7 ( Size 400/500) 5 (Size 200-315) Schunk 10 10 M6 M6 4,5 (Size 160) Tool group 21 Type 544-00 Reversible claw-type top jaws, 1 piece, tongue and groove, hardened huck Type Item no. Jaw length Jaw width Jaw height D ROT-G 160; ROT-S plus 160-42; ROT-S plus 2.0 160-42; ROT THW 165-43; ROT THW plus 165-43; ROT THW plus 185-52 137060 66 24 37,5 17 137061 66 20 37,5 61 137062 56 20 37,5 29 ROT-G 200-62; ROT-S plus 2.0 200-52; ROT-S plus 200-52; ROT THW 210; ROT THW plus 215-66 137064 81 24 43 71 137065 66 24 43 38,5 137066 79 34 43 29,5 137067 81 34 43 71 137068 66 34 43 38,5 ROT-G 250-82; ROT-G 315-102; ROT-S plus 2.0 250-62; ROT-S plus 250-62; ROT THW 250; ROT THW 315; ROT THW plus 260-81; ROT THW plus 315-104 137108 90 34 55 78 137109 72 34 55 38 137110 80 50 55 29 137111 90 50 55 78 137112 72 50 55 38 ROT-G 400-122; ROT-S plus 2.0 315-92; ROT-S plus 315-92; ROT THW 315; ROT THW 400-120 137114 100 34 62 90 137115 86 34 62 42 137116 93 50 62 30 137117 106 50 62 90 137118 86 50 62 42 ROT-G 500-162; ROT-S plus 400-102; ROT-S plus 500-162; ROT THW 500-128 137119 124 50 62 39 137120 124 50 62 112 137121 100 50 62 48 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 72 within 4 weeks

Soft segment top jaws, serration 60 Schunk Design I Tool group 21 Type 9052 Segment top jaws, 3 jaw set, can be hardened, serration 1,5x60 / 3x60 - material: 15 Design II Schunk huck Type 3-jaw set N K J Material Design Weight approx. kg ROT N 165; ROT NF 165; ROT NK 165 1032921 120 60 60 12 15 20 steel Design I 9 1032922 120 64 64 12 15 20 aluminium Design I 3,2 1032923 169 76 76 12 20 20 steel Design II 13 1032924 169 76 76 12 20 20 aluminium Design II 4 ROT N 210; ROT NF 210; ROT NK 210 1032925 150 64 76 14 15 25 steel Design I 14 1032926 150 64 76 14 15 25 aluminium Design I 5 1032927 210 76 95 14 25,5 25 steel Design II 20 1032928 210 76 95 14 25,5 25 aluminium Design II 7 ROT N 250; ROT NF 250; ROT NK 250 1032929 170 64 89 16 20 30 steel Design I 20 1032930 170 64 89 16 20 30 aluminium Design I 7 1032931 254 76 111 16 27 30 steel Design II 29 1032932 254 76 111 16 27 30 aluminium Design II 10 ROT N 315; ROT NF 315; ROT NK 315 1032933 240 76 118 15 30 30 steel Design I 28 1032934 240 76 118 18 30 30 aluminium Design I 10 1032935 304 76 133 18 34 30 steel Design II 41 1032936 304 76 133 18 34 30 aluminium Design II 14 ROT N 400-120; ROT NF 400-120 1032941 280 76 152 22 30 30 steel Design I 40 1032942 280 76 152 22 30 30 aluminium Design II 13 1032943 381 76 171 22 34 30 steel Design II 56 1032944 381 76 171 22 34 30 aluminium Design II 19 within 4 weeks 73

SPEIL DESIGN JWS You have not found the jaw you are looking for? With our own design departement and production line we are the perfect partner concerning exciting gripping solutions. ased on more than 100 years of experience in designing, various styles and forms are possible. Find your clamping jaw quickly and simply at www.jawfinder.biz

SMW-utoblok SMW-utoblok Soft top jaws, serration 90 76 Soft top jaws, without mounting holes, serration 90 77 Soft top jaws, serration 60 78 Soft top jaws, tongue and groove, for key bar chucks 80 Reversible top jaws, hardened, serration 90 81 Reversible top jaws, hardened, serration 60 82 Reversible top jaws, hardened, tongue and groove 84 ase jaws G, hardened, diagonally toothing 85 Soft one-piece jaws L, diagonally toothing 86 One-piece reversible jaws E, hardened, diagonally toothing 87 Draw-down jaws N, diagonally toothing 88 ase jaws G, hardened, diagonally toothing 90 Soft one-piece jaws LG, straight toothing 91 One-piece reversible jaws EG, hardened, straight toothing 92 Draw-down jaws NG, straight toothing 93 law-type jaws, hardened, serration 90 95 law-type jaws, hardened, serration 60 96 law-type jaws, hardened, tongue and groove 97 Errors and corrections are reserved!

Soft top jaws, serration 90 SMW-utoblok G F D +0,05 G G F 30 o Q p 537-02 = 3 mm Tool group 21 Type 543/538 Soft top jaws, 3-jaw set, can be hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G Q Serration Weight approx. kg SMW-utoblok L-D 125/3; N-D 125/3; -D 140/3; -D 175/3; H-D 130/3 P-D 215; P-D 260; PL-D 215; PL-D 260; NT-D 215; NT-D 260; NTL-D 260 L-D 165/3; N-D 165/3; P-D 170; -D 175/3; H-D 165/3; HD-F 165/3; HFKN-D 165-46; HYND-S 180/3; NT-D 170 L-D 210/3; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/3; HD-F 210/3; HFKN-D 210-52; HYND-S 210/3; HYND-S 226/3; NT-D 215; NT-D 260; NTL-D 260 P-D 215; P-D 260; PL-D 215; PL-D 260; HYND-S 210/3; HYND-S 226/3; NT-D 215; NT-D 260; NTL-D 260 045795 046403 046451 55 26,5 38 12 31 15-1/16 x 90 0,32 133147 133152 133157 66,7 36,5 53 17 36 19-1/16 x 90 0,7-585017 - 70 32,5 40 14 38 16,5 5 1/16 x90 1,7 133148 133153 133158 75 36,5 53 17 44 19-1/16 x 90 0,88-461712 - 75 36,5 65 17 44 19-1/16 x90 3,4-585021 - 90 36,5 40 17 47 23 5 1/16 x90 2,7-894365 - 90 40 60 17 43 22 5 1/16 x90 4,2-894357 - 98 35 40 17 61 22-1/16 x90 2,9 L-D 250/3; L-D 315/3; N-D 250/3; 133149 133154 133159 95 45 54,5 21 55 25-1/16 x 90 1,4 N-D 315/3; P-D 315; PL-D 315; -D 250/3; -D 315/3; H-D 250/3; HD-F 250/3; HD-F 315; - 585531-110 50 55,5 21 60 30-1/16 x90 6,3 HD-F 400/3; HYND-S 250/3; HYND-S 315/3; NT-D 315; NTL-D 315 L-D 315/3; N-D 315/3; P-D 315; 133150 133155 133160 103 50 80 21 62 25-1/16 x 90 2,58 PL-D 315; -D 315/3; HD-F 315; HD-F 400/3; HFKN-D 260-72; HFKN-D 315-91; HYND-S 250/3; - 894366-120 50 80 21 62 28-1/16 x90 8,9 HYND-S 315/3; NT-D 315; NTL-D 315 IN-D 1000/3; IN-D 1250/3-152790 461716 200 80 89 30 94 42 - m=2 8,5 L-D 400/3; N-D 400/3; P-D 400; PL-D 400; H-D 400/3; H-D 450/3; H-D 500/3; H-D 630/3; H-D 800/3; HD-F 400/3; HD-F 500/3; HD-F 600/3; HFKN-D 400-128; HFKN-D 500-155; IL-D 500/3; IL-D 630/3; IL-D 800/3; IN-D 500/3; IN-D 630/3; IN-D 800/3; NT-D 400; NTL-D 400 133151 133156 133161 130 50 80 25,5 79 31-3/32 x 90 3,1-118004 - 130 50 80 25,5 20 35-3/32 x90 3,1 76 within 4 weeks

Soft top jaws, without mounting holes, serration 90 SMW-utoblok Tool group 21 Type 543-28 Soft top jaws, piece, without mounting holes, can be hardened, serration 90 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D Serration Weight approx. kg L-D 125/2; L-D 125/3; N-D 125; N-D 125/3; -D 140/3; H-D 130/2; H-D 130/3 L-D 210/2; L-D 210/3; N-D 210/2; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/2; H-D 210/3; H-D 210/4; HD-F 210/3; HFKN-D 210-52; NT-D 215; NT-D 260; NTL-D 260 L-D 210/2; L-D 210/3; N-D 210/2; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/2; H-D 210/3; H-D 210/4; HD-F 210/3; L-D 200; HFKN-D 210-52; NT-D 215; NT-D 260; NTL-D 260 L-D 210/2; L-D 210/3; N-D 210/2; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/2; H-D 210/3; H-D 210/4; HD-F 210/3; HFKN-D 210-52; NT-D 215; NT-D 260; NTL-D 260 L-D 210/2; L-D 210/3; N-D 210/2; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/2; H-D 210/3; H-D 210/4; HD-F 210/3; L-D 200; HFKN-D 210-52; NT-D 215; NT-D 260; NTL-D 260 L-D 210/2; L-D 210/3; N-D 210/2; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/2; H-D 210/3; H-D 210/4; HD-F 210/3; L-D 200; HFKN-D 210-52; HFKN-D 260-72; NT-D 215; NT-D 260; NTL-D 260 L-D 250/2; L-D 250/3; L-D 315/2; L-D 315/3; N-D 250/2; N-D 250/3; N-D 315/2; N-D 315/3; P-D 315; PL-D 315; -D 250/3; -D 315/3; H-D 250/2; H-D 250/3; H-D 250/4; H-D 315/2; H-D 315/3; H-D 315-4; HD-F 250/3; HD-F 315; HD-F 400/3; L-D 200; L-D 250; L-D 315; HFKN-D 315-91; NT-D 315; NTL-D 315 L-D 400/2; L-D 400/3; L-D 400/4; N-D 400/2; N-D 400/3; N-D 400/4; P-D 400; PL-D 400; -N 400-140; -N 460-181; -N 500-205; -N 500-230; -N ES 400-140; -N ES 460-181; -N ES 500-205; -N ES 500-230; -N ES 600-275; -N ES 630-235; H-D 400/3; H-D 400/4; H-D 450/3; H-D 450/4; H-D 500/3; H-D 630/3; H-D 800/3; HD-F 400/3; HD-F 500/3; HD-F 600/3; L-D 250; L-D 315; HFKN-D 400-128; HFKN-D 500-155; IL-D 500/3; IL-D 500/4; IL-D 630/3; IL-D 630/4; IL-D 800/3; IL-D 800/4; IN-D 800/3; IN-D 800/4; NT-D 400; NTL-D 400 631327 55 26,5 38 12 1/16 x90 0,4 667392 90 36,5 53 17 1/16 x90 1,3 155423 105 36,5 53 17 1/16 x90 1,5 681620 120 36,5 53 17 1/16 x90 1,7 155424 90 45 54,5 17 1/16 x90 1,7 155425 105 45 54,5 17 1/16 x90 2 155426 120 45 54,5 17 1/16 x90 2,2 155427 90 50 80 17 1/16 x90 2,6 155428 120 45 54,5 21 1/16 x90 2,2 155429 150 45 54,5 21 1/16 x90 2,7 667208 120 50 80 21 1/16 x90 3,5 155430 150 50 80 21 1/16 x90 4,4 155431 155 50 80 25,5 1/16 x90 4,4 155432 155 68 89 25,5 1/16 x90 7 155433 155 68 89 25,5 1/16 x90 8,7 SMW-utoblok within 4 weeks 77

Soft top jaws, serration 60 SMW-utoblok G F 4,5 D H7 Tool group 21 Type 543-32 Soft top jaws, 3-jaw set, can be hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G Serration Weight approx. kg SMW-utoblok L-M 165/3; N-M 165/3; P-M 170; -M 175/3; H-M 165/3; HM-F 165/3; HFKN-M 165-46; NT-M 170 L-M 210/3; N-M 210/3; PL-M 215; P-M 215; -M 210/3; H-M 210/3; HM-F 210/3; HFKN-M 210-52; NT-M 215 L-M 210/3; N-M 210/3; -M 210/3; H-M 210/3; HM-F 210/3; HFKN-M 210-52 L-M 250/3; N-M 250/3; PL-M 260; P-M 260; -M 250/3; H-M 250/3; HM-F 250/3; HFKN-M 260-72; NTL-M 260; NT-M 260 L-M 315/3; N-M 315/3; PL-M 315; P-M 315; -M 315/3; H-M 315/3; HM-F 315/3; HFKN-M 260-72; HFKN-M 315-91; NTL-M 315; NT-M 315 154865 72 30,5 43 12 37 20 1,5 x 60 0,5 154867 95 35 45,5 14 46 25 1,5 x 60 0,9 159780 95 35 45,5 17 46 25 1,5 x 60 2,7 154869 110 50 45 16 50 30 1,5 x 60 1,7 154871 130 50 55,5 21 52 30 1,5 x 60 1,9 78 within 4 weeks

SMW-utoblok Soft top jaws, serration 60 D +0,05 M F G G F D +0,05 30 o Tool group 21 Type 530 Soft top jaws, 3-jaw set, can be hardened, serration 60 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg L-M 210/3; N-M 210/3; -M 210/3; H-M 210/3; HM-F 210/3; HFKN-M 165-46 L-M 315/3; N-M 315/3; PL-M 315; P-M 315; -M 315/3; H-M 315/3; HM-F 315/3; HM-F 400/3; HFKN-M 315-91; NTL-M 315; NT-M 315 046432 046411 88,9 36,5 53 14 45 26 34 1,5 x 60 1,125 046442 046421 120 50 80 21 67 28-1,5 x 60 3,125 SMW-utoblok Special Jaws for Lathe hucks High flexibility and individual clamping options With our own construction department and production we are the perfect partner concerning gripping solutions and clamping problems. For designing the various styles and forms we rely on our experience of more than 100 years. Drill hucks Live enters Lathe hucks Vices utomation Technology Power huck Technology Mandrels Tool lamping Systems Special Design www.roehm.biz within 4 weeks 79

Soft top jaws, tongue and groove, for key bar chucks SMW-utoblok Tool group 28 Type 002 Unstepped top jaw, 3-jaw set, standard design, soft, material 16Mnr5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G H K HG-F 160-46; HG-N 160-46; KNS-N 140-35; KNS-N 170-43 094008 85 20,3 41 8 36,5 42 18 32 137055 1) 85 24,4 47 8 42,5 42 18 32 SMW-utoblok HG-F 210-60; HG-N 210-60; KNS-N 210-52; KNS-N 255-66; KNS-N 210-52; KNS-N 225-66 HG-F 210-60; HG-N 210-60; HG-N 315-102; KNS-N 210-52; KNS-N 255-66; KNS-N 260-78; KNS-N 210-52; KNS-N 225-66 HG-F 260-81; HG-N 260-81; HG-N 315-102; KNS-N 260-78; KNS-N 275-86; KNS-N 325-104; KNS-N 340-117; KNS-N 260-78; KNS-N 275-86; KNS-N 325-104; KNS-N 340-117 HG-F 315-102; HG-N 400-128; KNS-N 400-128; KNS-N 400-128 094009 105 22 45 10 40 50 20 40 137056 1) 105 34,3 56 10 51 50 20 40 094010 125 30,4 55 12 50 70 20 40 137057 1) 125 50,5 80 12 75 70 20 40 094011 145 34,3 56 12 50 74 26 54 137058 1) 145 50,5 80 12 74 74 26 54 HG-F 400-128; HG-N 500-165; HG-N 630-254; KNS-N 500-155; KNS-N 630-165; KNS-N 500-155; KNS-N 630-165; KNS-N 800-165 1) extended design 618098 145 34,3 80 12 75 74 26 54 094046 180 50,5 80 18 73 100 30 60 80 within 4 weeks

SMW-utoblok Reversible top jaws, hardened, serration 90 G G F D H7 M Tool group 21 Type 543/538 Reversible top jaws, 3-jaw set, hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg L-D 125/3; N-D 125/3; -D 140/3; H-D 130/3-351320 - 51,5 26 26 12 13,5 15 8 1/16 x 90 0,15 045796 046404 046452 56 26 37,5 12 14 15 10 1/16 x 90 0,17 L-D 125/3; L-D 165/3; N-D 125/3; N-D 165/3; P-D 170; PL-D 215; -D 175/3; H-D 165/3; HD-F 165/3; HFKN-D 165-46; HYND-S 180/3 L-D 210/3; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/3; HD-F 210/3; NT-D 215; NT-D 260; NTL-D 260-585018 - 68 34,7 45 14 18 16,5 10 1/16 x90 1,1 046429 046408 046456 68 34,7 45 17 17 19 10 1/16 x 90 0,35 118521 118522 118523 75 36 49 17 21,5 19 12 1/16 x 90 0,46-609592 - 80 36 37 17 41 19 12 1/16 x 90 0,235 SMW-utoblok - 585022-81 40 49 17 19 23 12 1/16 x90 1,5 L-D 250/3; L-D 315/3; N-D 250/3; 046435 046414 046462 103,5 50 58 21 33,5 25 14 1/16 x 90 1,13 N-D 315/3; P-D 315; PL-D 315; -D 250/3; -D 315/3; H-D 250/3; H-D 315/3; HD-F 250/3; - 585533-104,5 44,5 54 21 25,5 30 13 1/16 x90 3,2 HD-F 315; HFKN-D 260-72; HFKN-D 315-91; HYND-S 250/3; HYND-S 315/3; NT-D 315; NTL-D 315 IN-D 1000/3; IN-D 1250/3-152789 - 200 80 85 30 78 42 13 m=2 6 L-D 400/3; N-D 400/3; P-D 400; PL-D 400; H-D 400/3; H-D 450/3; H-D 630/3; H-D 800/3; HD-F 400/3; HD-F 500/3; HD-F 600/3; HFKN-D 400-128; HFKN-D 500-155; IL-D 500/3; IL-D 630/3; IL-D 800/3; IN-D 500/3; IN-D 630/3; IN-D 800/3; NT-D 400; NTL-D 400 046447 037531 046474 135 68 65 25,5 48 31+31 26 3/32 x 90 2,4 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 81

SMW-utoblok Reversible top jaws, hardened, serration 60 G G D H7 M Tool group 21 Type 543-31 Reversible top jaws, 3-jaw set, hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg SMW-utoblok L-M 165/3; N-M 165/3; P-M 170; 154674 1) 66 34,7 36 12 12,5 20 12 1,5 x 60 0,3 -M 175/3; H-M 165/3; HM-F 165/3; HFKN-M 165-46; NT-M 170 L-M 210/3; N-M 210/3; PL-M 215; 154676 81 36 49 14 17,5 25 12 1,5 x 60 0,6 P-M 215; -M 210/3; H-M 210/3; HM-F 210/3; HFKN-M 210-52; HFKN-M 260-72; NT-M 215 L-M 210/3; N-M 210/3; 159776 81 36 49 17 17,5 25 12 1/16 x60 0,6 -M 210/3; H-M 210/3; HM-F 210/3; HFKN-M 210-52 L-M 250/3; N-M 250/3; 154678 99,5 44,5 54 16 25,5 30 13 1,5 x 60 1,2 PL-M 260; P-M 260; -M 250/3; H-M 250/3; HM-F 250/3; NTL-M 260; NT-M 260 L-M 315/3; N-M 315/3; PL-M 315; 154816 1) 103 50 55,5 21 22,5 30 17 1,5 x 60 1,5 P-M 315; -M 315/3; H-M 315/3; HM-F 315/3; HFKN-M 260-72; HFKN-M 315-91; NTL-M 315; NT-M 315 1) one step only Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. 82 within 4 weeks

SMW-utoblok Reversible top jaws, hardened, serration 60 G G F D H7 M Tool group 21 Type 530 Reversible top jaws, 3-jaw set, hardened, serration 60 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg HFKN-M 210-52 046433 046412 1) 81 36 52,5 14 25 21 12 1,5 x 60 0,6 L-M 315/3; N-M 315/3; -M 315/3; HM-F 315/3; HM-F 400/3; HFKN-M 315-91 046443 046422 112 49,5 61 21 27 33 15 1,5 x 60 1,55 1) Near the serration reduced to 34 mm Hardened jaws, supplied as supplement or as spares, must be ground on the chuck SMW-utoblok within 4 weeks 83

Reversible top jaws, hardened, tongue and groove SMW-utoblok K = = N O F H D Tool group 36 Type 530 Reversible top jaws, 3-jaw set, hardened, tongue and groove, for external and internal chucking - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F H K N O HG-F 160-46; HG-N 160-46; KNS-N 140-35; KNS-N 170-43 332774 61,5 20,4 37 8 32,7 18 32 17,7 25,2 137047 62 24,4 40 8 35,7 18 32 17,7 25,7 094012 61,5 20,4 37 8 32,5 18 32 17,5 25 SMW-utoblok HG-F 210-60; HG-N 210-60; KNS-N 210-52; KNS-N 255-66; KNS-N 210-52; KNS-N 225-66 HG-F 260-81; HG-N 260-81; HG-N 315-102; KNS-N 260-78; KNS-N 275-86; KNS-N 325-104; KNS-N 340-117; KNS-N 260-78; KNS-N 275-86; KNS-N 325-104; KNS-N 340-117 332775 70,5 24,4 42 10 38 20 40 18 28 137048 126 34,4 46 10 41 20 40 18 28 094013 70,5 24,4 43 10 38 20 40 18 28 332776 92 34,4 55 12 50 20 40 22 36 137049 92 35,7 59 12 54 20 40 22 36 094014 92 34,4 55 12 50 20 40 22 36 HG-F 315-102; HG-N 400-128; KNS-N 400-128; KNS-N 400-128 HG-F 400-128; HG-N 500-165; HG-N 630-254; KNS-N 500-155; KNS-N 630-165; KNS-N 500-155; KNS-N 630-165; KNS-N 800-165 332777 107 37,5 61 12 56 26 54 26 41 137050 107 50,4 67 12 61 26 54 26 41 094015 107 35,7 62 12 56 26 54 26 41 332778 130 50,4 79 18 72 30 60 32 52 094045 130 50,4 79 18 72 30 60 32 52 HG-N 630-254; KNS-N 630-165 747081 185 68 110 24 102 40 82 42 72 140715 185 68 110 24 102 40 82 42 72 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. 84 within 4 weeks

H ase jaws G, hardened, diagonally toothing SMW-utoblok L F D Tool group 28 Type 002 ase jaw G, 3-jaw set, with mounting bolts huck Type 3-jaw set Jaw length Jaw width D F H L Weight approx. kg HG-F 160-46 094004 74 20 18 8 29,5 32 0,265 HG-F 210-60 094005 90 22 20 10 35 40 0,365 HG-F 260-81 094006 110 26 20 12 40 40 0,7 HG-F 315-102 094007 125 32 26 12 46 54 1,065 HG-F 400-128 094044 160 45 30 18 52,7 60 2,35 SMW-utoblok within 4 weeks 85

Soft one-piece jaws L, diagonally toothing SMW-utoblok T Tool group 28 Type 000 Unstepped Jaw L, 3-jaw set, soft, material 16Mnr5 huck Type 3-jaw set Jaw length Jaw width Jaw height T Weight approx. kg HG-F 160-46 332763 84,5 20 45 24 1,41 HG-F 210-60 332764 98,4 22 60 35 2,52 162560 98,4 22 80 55 3,5 SMW-utoblok 643088 98,4 22 90 65 4 321444 98,4 22 95 70 4,2 249678 98,4 22 60 35 0,9 HG-F 260-81 332765 118,7 26 70 41 4,23 810394 118,7 26 80 51 5 162561 118,7 26 90 61 5,7 810396 118,7 26 100 71 6,4 616002 70 26 100 71 3,5 616000 115 26 130 101 8,5 695681 180 26 140 111 14,3 249679 118,7 26 70 41 1,535 HG-F 315-102 332766 136,6 32 79 44,5 7,3 249680 136,6 32 79 44,5 2,4 HG-F 400-128 332767 173,6 45 93 54 15,7 249681 173,6 45 93 54 5 86 within 4 weeks

SMW-utoblok One-piece reversible jaws E, hardened, diagonally toothing J H G T Tool group 28 Type 000 One-piece jaw E, 3-jaw set, hardened huck Type 3-jaw set Jaw length Jaw width Jaw height G H J T Weight approx. kg HG-F 160-46 332757 77,7 20 45 37,5 30 22,5 24 1,1 094000 77,7 20 45 37,5 30 22,5 24 0,5 HG-F 210-60 332758 94,7 22 60 50 40 30 35 1,9 094001 94,7 22 60 50 40 30 35 0,635 HG-F 260-81 332759 114 26 70 56-42 41 3,3 094002 114 26 70 56-42 41 1,135 HG-F 315-102 332760 130 32 79 64-49 44,5 5,3 SMW-utoblok 094003 130 32 79 64-49 44,5 1,835 HG-F 400-128 332761 167 45 93 73-53 54 10,8 094043 167 45 93 73-53 54 3,665 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please send us the chuck. within 4 weeks 87

Draw-down jaws N, diagonally toothing SMW-utoblok E M6 D huck front side Tool group 21 Type 545-00 Draw-down jaws, 1 piece, without clamping inserts, diagonally toothing, huck Type Item no. Jaw length Jaw width Jaw height D E F Thread HG-F 160-46 141037 84,4 20 43,5 15 11 22,5 M6 141038 84,4 20 43,5 15 32 22,5 M6 HG-F 210-60 141039 98,4 22 47,5 15 12 22,5 M6 SMW-utoblok F 141040 98,4 22 47,5 15 48 22,5 M6 HG-F 260-81 141041 118,7 26 58,5 20 12 29,5 M6 141042 118,7 26 58,5 20 58 29,5 M6 HG-F 315-102 141043 136,4 32 63,9 20 12 29,5 M6 141044 136,4 32 63,9 20 72 29,5 M6 HG-F 400-128 141045 173,6 45 73,4 25 12 34,3 M6 141046 173,6 45 73,4 25 77 34,3 M6 Interchangeable clamping inserts Tool group 15 Type 545-60 Interchangeable clamping inserts, 1 piece, with claws Item no. Size Design ontents of delivery 151029 140 with claws piece 141049 160/200 with claws piece 141052 250/315 with claws piece 141055 400/500 with claws piece 88 within 4 weeks

Interchangeable clamping inserts SMW-utoblok Tool group 15 Type 545-70 Interchangeable clamping inserts, 1 piece, with serrated toothing Item no. Size Design ontents of delivery 151039 140 with serrated toothing piece 141050 160/200 with serrated toothing piece 141053 250/315 with serrated toothing piece 141056 400/500 with serrated toothing piece SMW-utoblok Tool group 15 Type 545-80 Interchangeable clamping inserts, 1 piece, with heat treatable surface Item no. Size Design ontents of delivery 151040 140 with heat treatable surface piece 141051 160/200 with heat treatable surface piece 141054 250/315 with heat treatable surface piece 141057 400/500 with heat treatable surface piece Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 89

ase jaws G, hardened, diagonally toothing SMW-utoblok L F H D Tool group 21 Type 574-11 ase jaws, 3-jaw-set, hardened, straight toothing, with cylindrical screws DIN 912-12.9 huck Type 3-jaw set Jaw length Jaw width D F H L Weight approx. kg SMW-utoblok HG-N 160-46; 463548 65 20 18 8 27,5 32 0,7 KNS-N 170-43 HG-N 210-60; 463549 85 22 20 10 29,5 40 1 KNS-N 210-52; KNS-N 255-66 HG-N 260-81; K 463550 104 26 20 12 37 40 1,8 NS-N 260-78 HG-N 315-102 463551 115 32 20 12 43 40 2,7 HG-N 400-128; KNS-N 400-128 463552 125 32 26 12 43 54 3 90 within 4 weeks

Soft one-piece jaws LG, straight toothing SMW-utoblok E T Tool group 21 Type 574-37 Soft one-piece jaws, 3-jaw set, can be hardened, straight toothing, guidance hardened and ground - material: 16 Mnr 5 D huck Type 3-jaw set Jaw length Jaw width Jaw height D E T Weight approx. kg HG-N 160-46; KNS-N 170-43 463562 65 20 55 56 25 33 1,3 HG-N 210-60; KNS-N 210-52; 463563 84 22 65 67,5 27 38 2,2 KNS-N 255-66 HG-N 260-81; KNS-N 260-78 463564 99 26 84 77 36 53 4,3 HG-N 315-102; KNS-N 325-104 463565 121 32 90 93 41 54 6,7 HG-N 400-128; KNS-N 400-128 463566 148 32 100 120 41 64 9,2 SMW-utoblok within 4 weeks 91

SMW-utoblok One-piece reversible jaws EG, hardened, straight toothing J H G T Tool group 21 Type 574-27 One-piece reversible jaws, 3-jaw set, hardened, straight toothing - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height G H J T Weight approx. kg HG-N 160-46; KNS-N 170-43 463555 58 20 44 37 30 23 23 0,6 HG-N 210-60; KNS-N 210-52; 463556 75 22 51 43 35 27 26 1,3 KNS-N 255-66 HG-N 260-81; KNS-N 260-78 463557 90 26 60 50 40 30 31 2 SMW-utoblok HG-N 315-102; KNS-N 325-104 463558 117 32 66 56 46 36 32 3,4 HG-N 400-128; KNS-N 400-128 463559 137 32 70 59 48 37 36 4,9 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. 92 within 4 weeks

Draw-down jaws NG, straight toothing SMW-utoblok E M6 D F Tool group 21 Type 545-30 Draw-down jaws, 1 piece, for interchangeable clamping inserts, straight toothing, without clamping inserts huck Type Item no. Jaw length Jaw width Jaw height D E F Thread HG-N 160-46; KNS-N 170-43 485522 65 20 43 15 11 22,5 M6 485523 72 20 43 15 30 22,5 M6 HG-N 210-60; KNS-N 210-52; KNS-N 255-66 HG-N 260-81; KNS-N 260-78 HG-N 315-102; KNS-N 325-104 485524 85 22 47 15 12 22,5 M6 485525 95 22 47 15 45 22,5 M6 485526 104 26 58 20 12 29,5 M6 485527 104 26 58 20 50,5 29,5 M6 485528 115 32 63 20 12 29,5 M6 485529 123 32 63 20 61,5 29,5 M6 SMW-utoblok HG-N 400-128; KNS-N 400-128 HG-N 500-165; KNS-N 500-155 485530 125 32 63 20 12 29,5 M6 485531 134 32 63 20 67 29,5 M6 485532 160 45 81 20 12 34 M6 485533 160 45 81 25 96 34 M6 Interchangeable clamping inserts Tool group 15 Type 545-60 Interchangeable clamping inserts, 1 piece, with claws Item no. Size Design ontents of delivery 151029 140 with claws piece 141049 160/200 with claws piece 141052 250/315 with claws piece 141055 400/500 with claws piece within 4 weeks 93

Interchangeable clamping inserts SMW-utoblok Tool group 15 Type 545-70 Interchangeable clamping inserts, 1 piece, with serrated toothing Item no. Size Design ontents of delivery 151039 140 with serrated toothing piece 141050 160/200 with serrated toothing piece 141053 250/315 with serrated toothing piece 141056 400/500 with serrated toothing piece SMW-utoblok Tool group 15 Type 545-80 Interchangeable clamping inserts, 1 piece, with heat treatable surface Item no. Size Design ontents of delivery 151040 140 with heat treatable surface piece 141051 160/200 with heat treatable surface piece 141054 250/315 with heat treatable surface piece 141057 400/500 with heat treatable surface piece Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 94 within 4 weeks

SMW-utoblok law-type jaws, hardened, serration 90, groove 17-25,5 10 10 M M D H7 Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 17-25,5 1 / 16 x 90 o huck Type Item no. Jaw length Jaw height D Thread L-D 210/2; L-D 210/3; N-D 210/3; P-D 215; P-D 260; PL-D 215; PL-D 260; -D 210/3; H-D 210/2; H-D 210/3; H-D 210/4; HD-F 210/3; HFKN-D 210-52; NT-D 215; NT-D 260; NTL-D 260 137031 67 53 45 17 M6 137032 65 46 45 17 M6 137033 55 39 45 17 M6 137034 50 31 45 17 M6 137035 55 27 45 17 M6 137036 65 19 45 17 M6 137037 65 26 45 17 M6 SMW-utoblok 137038 55 24 45 17 M6 137039 55 40 45 17 M6 L-D 125/2; L-D 125/3; N-D 125; N-D 125/3; -D 140/3; H-D 130/2; H-D 130/3 144320 66 52 38 12 M6 144321 56 34 38 12 M6 144322 66 25 38 12 M6 L-D 250/2; L-D 250/3; L-D 315/3; N-D 250/2; N-D 250/3; N-D 315/2; N-D 315/3; P-D 315; PL-D 315; -D 250/3; -D 315/3; H-D 250/2; H-D 250/3; H-D 250/4; H-D 315/2; H-D 315/3; H-D 315-4; HD-F 250/3; HD-F 315; HD-F 400/3; HFKN-D 260-72; HFKN-D 315-91; NT-D 315; NTL-D 315 137041 95 80 50 21 M6 137042 75 60 50 21 M6 137043 60 43 50 21 M6 137044 70 37 50 21 M6 L-D 400/2; L-D 400/3; L-D 400/4; N-D 400/2; N-D 400/3; N-D 400/4; P-D 400; PL-D 400; H-D 400/3; H-D 400/4; H-D 450/3; H-D 450/4; H-D 500/3; H-D 630/3; H-D 800/3; HD-F 400/3; HD-F 500/3; HFKN-D 400-128; HFKN-D 500-155; IL-D 500/3; IL-D 500/4; IL-D 630/3; IL-D 630/4; IL-D 800/3; IL-D 800/4; IN-D 500/3; IN-D 500/4; IN-D 630/3; IN-D 630/4; IN-D 800/3; IN-D 800/4; NT-D 400; NTL-D 400 137045 95 25 50 21 M6 137046 80 30 50 21 M6 137051 130 113 65 25,5 M6 137052 90 67 65 25,5 M6 137053 100 45 65 25,5 M6 137054 130 33 65 25,5 M6 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 147263 1 M5 5 7 139177 1 M5 8 7 298191 1 M5 10 7 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 95

law-type jaws, hardened, serration 60 SMW-utoblok 10 10 M M D H7 1,5 x 60 o Tool group 21 Type 543-33 law-type jaws, 1 piece, hardened, serration 60 - width of the groove 12-16 huck Type Item no. Jaw length Jaw height D Thread L-M 165/2; L-M 165/3; N-M 165/2; N-M 165/3; P-M 170; -M 175/3; H-M 165/2; H-M 165/3; H-M 165/4; HM-F 165/3; HFKN-M 165-46; NT-M 170 156025 67 53 45 12 M6 156027 65 46 45 12 M6 156029 55 40 45 12 M6 SMW-utoblok L-M 250/2; L-M 250/3; N-M 250/2; N-M 250/3; PL-M 260; P-M 260; -M 250/3; H-M 250/2; H-M 250/3; H-M 250/4; HM-F 250/3; HFKN-M 260-72; NTL-M 260; NT-M 260 161189 55 24 45 12 M6 156099 95 80 50 16 M6 156101 75 60 50 16 M6 156103 60 43 50 16 M6 156105 70 37 50 16 M6 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 96 within 4 weeks

law-type jaws, hardened, tongue and groove SMW-utoblok 8 mm size 160/175 D 10 10 M6 M6 7 ( Size 400/500) 5 (Size 200-315) 4,5 (Size 160) Tool group 21 Type 544-00 Reversible claw-type top jaws, tongue and groove, 1 piece, hardened huck Type Item no. Jaw length Jaw width Jaw height D Max. swing HG-F 160-46; HG-N 160-46; KNS-N 140-35; KNS-N 170-43 137060 66 24 37,5 17 190 137061 66 20 37,5 61 190 137062 56 20 37,5 29 190 HG-F 210-60; HG-N 210-60; KNS-N 210-52; KNS-N 255-66; KNS-N 210-52; KNS-N 225-66 137064 81 24 43 71 280 137065 66 24 43 38,5 280 137066 79 34 43 29,5 280 137067 81 34 43 71 280 SMW-utoblok HG-F 260-81; HG-N 260-81; HG-N 315-102; KNS-N 260-78; KNS-N 275-86; KNS-N 325-104; KNS-N 340-117; KNS-N 260-78; KNS-N 275-86; KNS-N 325-104; KNS-N 340-117 137068 66 34 43 38,5 280 137108 90 34 55 78 330 137109 72 34 55 38 330 137110 80 50 55 29 330 137111 90 50 55 78 330 HG-F 315-102; HG-N 400-128; KNS-N 400-128; KNS-N 400-128 137112 72 50 55 38 330 137114 100 34 62 90 404 137115 86 34 62 42 404 137116 93 50 62 30 404 137117 106 50 62 90 404 HG-F 400-128; KNS-N 500-155; KNS-N 630-165; KNS-N 500-155; KNS-N 630-165 137118 86 50 62 42 404 137119 124 50 62 39 570 137120 124 50 62 112 506 137121 100 50 62 48 506 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 97

hoose the right clamping jaw from a wide range of jaws quickly and simply. ll well-established jaw types from one-piece jaws and reversible top jaws to claw jaws and draw-down jaws, can be found in this catalogue or with the jaw finder www.jawfinder.biz Find your clamping jaw quickly and simply at www.jawfinder.biz

Forkardt Soft top jaws, serration 90 100 Soft top jaws, without mounting holes, serration 90 101 Soft top jaws, tongue and groove, 120 bevelled 102 Soft top jaws, tongue and groove, for key bar chucks 103 Reversible top jaws, hardened, serration 90 104 Reversible top jaws, hardened, tongue and groove 105 ase jaws G, hardened, diagonally toothing 106 Soft one-piece jaws L, diagonally toothing 107 One-piece reversible jaws E, hardened, diagonally toothing 108 Draw-down jaws N, diagonally toothing 109 law-type jaws, hardened, serration 90 111 law-type jaws, hardened, tongue and groove 112 Soft segment top jaws, serration 90 113 Forkardt Errors and corrections are reserved!

Soft top jaws, serration 90 Forkardt G F G G F Q D +0,05 30 o p 537-02 = 3 mm Tool group 21 Type 543/538 Soft top jaws, set, can be hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G Q Serration Weight approx. kg KTH 130; KTH 140 045795 046403 046451 55 26,5 38 12 31 15 1/16 x 90 0,32 Forkardt 3KTG 160; 3KTG 200; 3KTN 160; 3KTN 200; 3QL 160-38; 133147 133152 133157 66,7 36,5 53 17 36 19-1/16 x 90 0,7 3QLK 160-38; G 160; G 200; G 250; KG 200; KGH 160; KGH 175; KGH 200; KGHF 160; KGHF 175; KL 160; KL 200; KLN 200; KP 200; KS 160; KS 200; KS 250; KSF 175; KSF 200; KSH 160; KSH 200; KSHF 200; KSPS 160; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 160; KTH 200; KTH 250; KTH 315; NH 160; NH 175; NH 200; NHF 160; NHF 175; NHF 200; UVE 160; UVE 200; UVE 250 3KTG 160; 3KTG 200; 3KTN 160; 3KTN 200; G 160; G 200; - 046407-66,7 36,5 53 17 33 22 1/16 x90 2,1 G 250; KG 200; KGH 160; KGH 175; KGH 200; KL 160; KL 200; KLN 200; KP 200; KS 160; KS 200; KS 250; KSF 175; KSF 200; KSH 160; KSH 200; KSHF 200; KSPS 160; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 200; KTH 250; KTH 315; NH 200; NHF 200; UVE 160; UVE 200; UVE 250 3KTG 200; 3KTN 200; 3QL 200-54; 3QL-KS 200-77; 133148 133153 133158 75 36,5 53 17 44 19-1/16 x 90 0,88 3QL-KS 250-101; 3QLK 200-54; 3QLK-KS 200-77; 3QLK-KS 250-101; KG 200; KGH 200; KGHF 200; KL 200; KL 250; KLN 200; KP 200; KS 200; KS 250; KSF 200; KSH 200; KSHF 200; KSHF 250; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 200; KTH 250; KTH 315; NH 200; NHF 200; NHF 250; NHF 290; UVE 200; UVE 250 3KTG 200; 3KTN 200; KG 200; KGH 200; KGHF 200; KL 200; - 118000-75 36,5 53 17 41 22 1/16 x90 2,7 KL 250; KLN 200; KP 200; KS 200; KS 250; KSF 200; KSH 200; KSHF 200; KSHF 250; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 200; KTH 250; KTH 315; NH 200; NHF 200; NHF 250; NHF 290; UVE 200; UVE 250 3KTG 200; 3KTN 200; 3QL 200-54; 3QL-KS 200-77; - 461712-75 36,5 65 17 44 19 1/16 x90 3,4 3QL-KS 250-101; 3QLK 200-54; 3QLK-KS 200-77; 3QLK-KS 250-101; KG 200; KGH 200; KGHF 200; KL 200; KL 250; KLN 200; KP 200; KS 200; KS 250; KSF 200; - 585021-90 36,5 40 17 47 23 5 1/16 x90 2,7 KSH 200; KSHF 200; KSHF 250; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 200; KTH 250; KTH 315; NH 200; - 894365-90 40 60 17 43 22 5 1/16 x90 4,2 NHF 200; NHF 250; NHF 290; UVE 200; UVE 250-894357 - 98 35 40 17 61 22 1/16 x90 2,9 2LN 200; 3KTG 250; 3KTG 315; 3KTN 250; 3KTN 315; 3QL 250-72; 3QL 315/88; 3QL-KS 315-135; 3QL-KS 400-168; 3QLK 250-72; 3QLK 315/88; 3QLK-KS 315-135; 3QLK-KS 400-168; KG 250; KG 315; KL 250; KLN 250; KLN 315; KP 250; KP 315; KS 315; KS 400; KSH 250; KSH 315; KSH 400; KSHF 250; KSHF 315; KSHF 400; KSPS 250; KSPS 300; KT 250; KT 315; KTF 250; KTF 315; KTGF 250; KTGF 315; NH 250; NH 315; NHF 250; NHF 290; NHF 315; NHF 400; UVE 315 3KTG 250; 3KTG 315; 3KTN 250; 3KTN 315; 3QL-KS 315-135; 3QL-KS 400-168; 3QLK-KS 315-135; 3QLK-KS 400-168; KG 250; KG 315; KL 250; KLN 250; KLN 315; KP 250; KP 315; KS 315; KS 400; KSH 250; KSH 315; KSH 400; KSHF 250; KSHF 315; KSHF 400; KSPS 250; KSPS 300; KT 250; KT 315; KTF 250; KTF 315; KTGF 250; KTGF 315; NH 250; NH 315; NHF 250; NHF 290; NHF 315; NHF 400; UVE 315 3KTG 400; 3KTG 500; 3KTN 400; 3KTN 500; 3QL 400-126; 3QLK 400-126; KG 400; KG 500; KL 400; KL 500; KLN 400; KLN 500; KP 400; KP 500; KS 500; KS 630; KSH 500; KSHF 630; KSPS 400; KT 400; KT 500; KT 630; KTF 400; KTF 500; KTGF 400; KTGF 500; KTGF 630; NH 400; NH 500; NH 630; NHF 400; NHF 500; NHF 630; UVE 400; UVE 500; UVE 630; UVE 800 133149 133154 133159 95 45 54,5 21 55 25-1/16 x 90 1,4-585531 - 110 50 55,5 21 60 30 1/16 x90 6,3 133150 133155 133160 103 50 80 21 62 25-1/16 x 90 2,58-894366 - 120 50 80 21 62 28 1/16 x90 8,9 133151 133156 133161 130 50 80 25,5 79 31-3/32 x 90 3,1-118004 - 130 50 80 25,5 20 35 3/32 x90 3,1 100 within 4 weeks

Soft top jaws, without mounting holes, serration 90 Forkardt Tool group 21 Type 543-28 Soft top jaws, piece, without mounting holes, can be hardened, serration 90 - material: 16 Mnr 5 huck Type Item no. Jaw length Jaw width Jaw height D Serration Weight approx. kg KTHS 130; KTHS 140 631327 55 26,5 38 12 1/16 x90 0,4 3KTG 160; 3KTG 200; 3KTN 160; 3KTN 200; 3QL 160-38; 3QL 200-54; 667392 90 36,5 53 17 1/16 x90 1,3 3QL-KS 200-77; 3QLK 160-38; 3QLK 200-54; 3QLK-KS 200-77; G 160; G 200; G 250; KG 200; KGH 160; KGH 175; KGH 200; KGHF 160; KGHF 175; KGHF 200; KL 160; KL 200; KLN 200; KP 200; KS 160; KS 200; KS 250; KSF 175; KSF 200; KSH 160; KSH 200; KSHF 200; KSPS 160; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 160; KTH 175; KTH 200; KTH 250; KTH 315; NH 160; NH 175; NH 200; NHF 160; NHF 175; NHF 200; UVE 160; UVE 200; UVE 250 3KTG 160; 3KTG 200; 3KTN 160; 3KTN 200; 3QL 160-38; 3QL 200-54; 155423 105 36,5 53 17 1/16 x90 1,5 3QL-KS 200-77; 3QL-KS 250-101; 3QLK 160-38; 3QLK 200-54; 3QLK-KS 200-77; 3QLK-KS 250-101; G 160; G 200; G 250; KG 200; KGH 160; KGH 175; KGH 200; KGHF 160; KGHF 175; KGHF 200; KL 160; KL 200; KL 250; KLN 200; KP 200; 681620 120 36,5 53 17 1/16 x90 1,7 KS 160; KS 200; KS 250; KSF 175; KSF 200; KSH 160; KSH 200; KSHF 200; KSHF 250; KSPS 160; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 160; KTH 175; KTH 200; KTH 250; KTH 315; NH 160; NH 175; NH 200; NHF 160; NHF 175; NHF 200; NHF 250; NHF 290; UVE 160; UVE 200; UVE 250 3KTG 160; 3KTG 200; 3KTN 160; 3KTN 200; 3QL 160-38; 3QL 200-54; 155424 90 45 54,5 17 1/16 x90 1,7 3QL-KS 200-77; 3QLK 160-38; 3QLK 200-54; 3QLK-KS 200-77; G 160; G 200; G 250; KG 200; KGH 160; KGH 175; KGH 200; KGHF 160; KGHF 175; KGHF 200; KL 160; KL 200; KLN 200; KP 200; KS 160; KS 200; KS 250; KSF 175; KSF 200; KSH 160; KSH 200; KSHF 200; KSPS 160; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 160; KTH 175; KTH 200; KTH 250; KTH 315; NH 160; NH 175; NH 200; NHF 160; NHF 175; NHF 200; UVE 160; UVE 200; UVE 250 3KTG 160; 3KTG 200; 3KTN 160; 3KTN 200; 3QL 160-38; 3QL 200-54; 155425 105 45 54,5 17 1/16 x90 2 3QL-KS 200-77; 3QL-KS 250-101; 3QLK 160-38; 3QLK 200-54; 3QLK-KS 200-77; 3QLK-KS 250-101; G 160; G 200; G 250; KG 200; KGH 160; KGH 175; KGH 200; KGHF 160; KGHF 175; KGHF 200; KL 160; KL 200; KL 250; KLN 200; KP 200; KS 160; KS 200; KS 250; KSF 175; KSF 200; KSH 160; KSH 200; KSHF 200; KSHF 250; KSPS 160; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 160; KTH 175; KTH 200; KTH 250; KTH 315; NH 160; NH 175; NH 200; NHF 160; NHF 175; NHF 200; NHF 250; NHF 290; UVE 160; UVE 200; UVE 250 3KTG 200; 3KTN 200; 3QL 200-54; 3QL-KS 200-77; 3QL-KS 250-101; 155426 120 45 54,5 17 1/16 x90 2,2 3QLK 200-54; 3QLK-KS 200-77; 3QLK-KS 250-101; G 200; G 250; KG 200; KGH 200; KGHF 200; KL 200; KL 250; KLN 200; KP 200; KS 200; KS 250; KSF 200; KSH 200; KSHF 200; KSHF 250; KSPS 200; KT 200; KTF 200; KTGF 200; 155427 90 50 80 17 1/16 x90 2,6 KTH 200; KTH 250; NH 200; NHF 200; NHF 250; NHF 290; UVE 200; UVE 250 2LN 200; 2KTG 250; 2KTG 315; 2KTN 250; 2KTN 315; 3KTG 250; 3KTG 315; 3KTN 250; 3KTN 315; 3QL 250-72; 3QL 315/88; 3QL-KS 315-135; 155428 120 45 54,5 21 1/16 x90 2,2 3QL-KS 400-168; 3QLK 250-72; 3QLK 315/88; 3QLK-KS 315-135; 3QLK-KS 400-168; 155429 4KTG 250; 4KTG 315; 4KTN 250; 4KTN 315; KG 250; KG 315; KL 250; KLN 250; 150 45 54,5 21 1/16 x90 2,7 KLN 315; KP 250; KP 315; KS 315; KS 400; KSH 250; KSH 315; KSH 400; KSHF 250; KSHF 315; KSHF 400; KSPS 250; KSPS 300; KT 250; KT 315; KTF 250; KTF 315; 667208 120 50 80 21 1/16 x90 3,5 KTGF 250; KTGF 315; NH 250; NH 315; NHF 250; NHF 290; NHF 315; NHF 400; UVE 315 155430 150 50 80 21 1/16 x90 4,4 Forkardt 2KTG 400; 2KTG 500; 2KTN 400; 2KTN 500; 3KTG 400; 3KTG 500; 3KTN 400; 3KTN 500; 3QL 400-126; 3QLK 400-126; 4KTG 400; 4KTG 500; 4KTN 400; 4KTN 500; KG 400; KG 500; KL 400; KL 500; KLN 400; KLN 500; KP 400; KP 500; KS 500; KS 630; KSH 500; KSHF 630; KSPS 400; KT 400; KT 500; KT 630; KTF 400; KTF 500; KTGF 400; KTGF 500; KTGF 630; NH 400; NH 500; NH 630; NHF 400; NHF 500; NHF 630; UVE 400; UVE 500; UVE 630; UVE 800 155431 155 50 80 25,5 1/16 x90 4,4 155432 155 68 89 25,5 1/16 x90 7 155433 155 68 89 25,5 1/16 x90 8,7 within 4 weeks 101

Soft top jaws, tongue and groove, 120 bevelled Forkardt 538-00 M +0,03 D 0,03 G Tool group 21 Type 549/538 Soft top jaws, set, can be hardened, tongue and groove 120 bevelled, material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Q Weight approx. kg KG 130; KS 130 123356 123355 58 26,5 38 13 31,5-8 3 0,31 KG 160; KT 160 123359 123358 72,7 36,5 53 10 32,2 25 16 3 0,72 KG 200; KT 200; KTGF 200 123431 123430 90,3 36,5 53 12 45,3 30 16 6 1 3KTG 250; 3KTN 250; KG 250; KT 250 123434 123433 115,3 45 54,5 20 58,3 40 16 6 1,55 KT 315 129847 129849 146 50 80 20 63,5 50 16 6 3,6 Forkardt Q 538-12 30 o 102

Forkardt Soft top jaws, tongue and groove, for key bar chucks Tool group 28 Type 002 Unstepped top jaw, 3-jaw set, standard design, soft, material 16Mnr5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G H K F+ 125 212123 55 20,7 31,3 14 25,5 25 5 20 3FN 175-42; F+ 160; F 160; KTN 160; KTNV 160; KTNV 175 3FN 200-45; F+ 200; F 200; KTN 200; KTNV 200 3FN 250-72; 3FN 315-82; F+ 250; F 250; KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315 3FN 400-92; F+ 315; F 315; KTN 360; KTN 400; KTNV 400; UN 400 094008 85 20,3 41 8 36,5 42 18 32 137055 1) 85 24,4 47 8 42,5 42 18 32 094009 105 22 45 10 40 50 20 40 137056 1) 105 34,3 56 10 51 50 20 40 094010 125 30,4 55 12 50 70 20 40 137057 1) 125 50,5 80 12 75 70 20 40 094011 145 34,3 56 12 50 74 26 54 137058 1) 145 50,5 80 12 74 74 26 54 618098 145 34,3 80 12 75 74 26 54 3FN 500-125; 3FN 630-125; F+ 400; F+ 500; F 400; F 500-L; KTN 500; KTN 630; KTNV 500; KTNV 630; UN 500 1) extended design 094046 180 50,5 80 18 73 100 30 60 Forkardt 103

Forkardt Reversible top jaws, hardened, serration 90 G G F D H7 M Tool group 21 Type 543/538 Reversible top jaws, 3-jaw set, hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg Forkardt 3KTG 160; 3KTG 200; 3KTN 160; 3KTN 200; 3QL 160-38; 3QL 200-54; 3QL-KS 200-77; 046429 046408 046456 68 34,7 45 17 17 19 10 1/16 x 90 0,35 3QL-KS 250-101; 3QLK 160-38; 3QLK 200-54; 118521 3QLK-KS 200-77; 3QLK-KS 250-101; G 160; 118522 118523 75 36 49 17 21,5 19 12 1/16 x 90 0,46 G 200; G 250; KG 200; KGH 160; KGH 175; KGH 200; KGHF 160; KGHF 175; KGHF 200; - 609592-80 36 37 17 41 19 12 1/16 x 90 0,235 KL 160; KL 200; KL 250; KLN 200; KP 200; KS 160; KS 200; KS 250; KSF 175; KSF 200; KSH 160; KSH 200; KSHF 200; KSHF 250; - 585022-81 40 49 17 19 23 12 1/16 x90 1,5 KSPS 160; KSPS 200; KT 160; KT 200; KTF 200; KTGF 200; KTH 160; KTH 175; KTH 200; NH 160; NH 175; NH 200; NHF 160; NHF 175; NHF 200; UVE 160; UVE 200; UVE 250 3KTG 250; 3KTG 315; 3KTN 250; 3KTN 315; 3QL 250-72; 3QL 315/88; 3QL-KS 315-135; 046435 046414 046462 103,5 50 58 21 33,5 25 14 1/16 x 90 1,13 3QL-KS 400-168; 3QLK 250-72; 3QLK 315/88; - 3QLK-KS 315-135; 3QLK-KS 400-168; G 315; 585533-104,5 44,5 54 21 25,5 30 13 1/16 x90 3,2 G 400; KG 250; KG 315; KL 250; KLN 250; KLN 315; KS 315; KS 400; KSH 250; KSH 315; KSH 400; KSHF 250; KSHF 315; KSHF 400; KSPS 250; KSPS 300; KT 250; KT 315; KTF 250; KTF 315; KTGF 250; KTGF 315; NH 250; NH 315; NHF 250; NHF 315; NHF 400; UVE 315 3KTG 400; 3KTG 500; 3KTN 400; 3KTN 500; 3QL 400-126; 3QLK 400-126; KF 400; KF 500; KG 400; KG 500; KL 400; KL 500; KLN 400; KLN 500; KP 400; KP 500; KS 500; KS 630; KSH 500; KSHF 630; KSPS 400; KT 400; KT 500; KT 630; KTF 400; KTF 500; KTGF 400; KTGF 500; KTGF 630; NH 400; NH 500; NH 630; NHF 400; NHF 500; NHF 630; UVE 400; UVE 500; UVE 630; UVE 800 046447 037531 046474 135 68 65 25,5 48 31+31 26 3/32 x 90 2,4 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. 104 within 4 weeks

Reversible top jaws, hardened, tongue and groove Forkardt K = = N O F H D Tool group 36 Type 530 Reversible top jaws, 3-jaw set, hardened, tongue and groove, for external and internal chucking - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F H K N O 3FN 175-42; F+ 160; F 160; KTN 160; KTNV 160; KTNV 175 332774 61,5 20,4 37 8 32,7 18 32 17,7 25,2 137047 62 24,4 40 8 35,7 18 32 17,7 25,7 094012 61,5 20,4 37 8 32,5 18 32 17,5 25 3FN 200-45; F+ 200; F 200; KTN 200; KTNV 200 332775 70,5 24,4 42 10 38 20 40 18 28 137048 126 34,4 46 10 41 20 40 18 28 094013 70,5 24,4 43 10 38 20 40 18 28 3FN 250-72; 3FN 315-82; F+ 250; F 250; KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315 3FN 400-92; F+ 315; F 315; KTN 360; KTN 400; KTNV 400; UN 400 332776 92 34,4 55 12 50 20 40 22 36 137049 92 35,7 59 12 54 20 40 22 36 094014 92 34,4 55 12 50 20 40 22 36 332777 107 37,5 61 12 56 26 54 26 41 137050 107 50,4 67 12 61 26 54 26 41 094015 107 35,7 62 12 56 26 54 26 41 3FN 500-125; 3FN 630-125; F+ 400; 332778 130 50,4 79 18 72 30 60 32 52 F+ 500; F 400; F 500-L; KTN 500; KTN 630; KTNV 500; KTNV 630; 094045 130 50,4 79 18 72 30 60 32 52 UN 500 F+ 630; F 630 747081 185 68 110 24 102 40 82 42 72 Forkardt 140715 185 68 110 24 102 40 82 42 72 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 105

H ase jaws G, hardened, diagonally toothing Forkardt L F Tool group 28 Type 002 ase jaw G, 3-jaw set, with mounting bolts D huck Type 3-jaw set Jaw length Jaw width D F H L Weight approx. kg F+ 125 212119 47 14 5-22 20 0,2 3FN 175-42; F+ 160; F 160; 094004 74 20 18 8 29,5 32 0,265 KTN 160; KTNV 160; KTNV 175 3FN 200-45; F+ 200; F 200; 094005 90 22 20 10 35 40 0,365 KTN 200; KTNV 200 3FN 250-72; 3FN 315-82; F+ 250; 094006 110 26 20 12 40 40 0,7 F 250; KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315 3FN 400-92; F+ 315; F 315; 094007 125 32 26 12 46 54 1,065 KTN 360; KTN 400; KTNV 400; UN 400 3FN 500-125; 3FN 630-125; F+ 400; 094044 160 45 30 18 52,7 60 2,35 F+ 500; F 400; F 500-L; KTN 500; KTN 630; KTNV 500; KTNV 630; UN 500 F+ 630; F 630 140194 230 65 40 24 62 82 5,665 Forkardt 106 within 4 weeks

Soft one-piece jaws L, diagonally toothing Forkardt T Tool group 28 Type 000 Unstepped Jaw L, 3-jaw set, unstepped, soft, material 16Mnr5 huck Type 3-jaw set Jaw length Jaw width Jaw height T Weight approx. kg 3FN 175-42; F+ 160; F 160; KTN 160; KTNV 160; KTNV 175 3FN 200-45; F+ 200; F 200; KTN 200; KTNV 200 332763 84,5 20 45 24 1,41 332764 98,4 22 60 35 2,52 162560 98,4 22 80 55 3,5 643088 98,4 22 90 65 4 321444 98,4 22 95 70 4,2 249678 98,4 22 60 35 0,9 3FN 250-72; 3FN 315-82; F+ 250; 332765 118,7 26 70 41 4,23 KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315 3FN 250-72; 3FN 315-82; 3FN 810394 118,7 26 80 51 5 500-125; F+ 250; KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315; UN 500 3FN 250-72; 3FN 315-82; F+ 250; 162561 118,7 26 90 61 5,7 KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315 810396 118,7 26 100 71 6,4 616002 70 26 100 71 3,5 616000 115 26 130 101 8,5 695681 180 26 140 111 14,3 Forkardt 249679 118,7 26 70 41 1,535 3FN 400-92; F+ 315; F 315; KTN 360; KTN 400; KTNV 400; UN 400 3FN 500-125; 3FN 630-125; F+ 400; F+ 500; F 400; F 500-L; KTN 500; KTN 630; KTNV 500; KTNV 630; UN 500 332766 136,6 32 79 44,5 7,3 249680 136,6 32 79 44,5 2,4 332767 173,6 45 93 54 15,7 249681 173,6 45 93 54 5 within 4 weeks 107

Forkardt One-piece reversible jaws E, hardened, diagonally toothing Tool group 28 Type 000 One-piece jaw E, 3-jaw set, hardened huck Type 3-jaw set Jaw length Jaw width Jaw height G H J T Weight approx. kg 3FN 175-42; F+ 160; F 160; KTN 160; KTNV 160; KTNV 175 3FN 200-45; F+ 200; F 200; KTN 200; KTNV 200 3FN 250-72; 3FN 315-82; F+ 250; F 250; KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315 3FN 400-92; F+ 315; F 400; KTN 360; KTN 400; KTNV 400; UN 400 332757 77,7 20 45 37,5 30 22,5 24 1,1 094000 77,7 20 45 37,5 30 22,5 24 0,5 332758 94,7 22 60 50 40 30 35 1,9 094001 94,7 22 60 50 40 30 35 0,635 332759 114 26 70 56-42 41 3,3 094002 114 26 70 56-42 41 1,135 332760 130 32 79 64-49 44,5 5,3 094003 130 32 79 64-49 44,5 1,835 3FN 500-125; 3FN 630-125; F+ 400; 332761 167 45 93 73-53 54 10,8 F+ 500; F 400; F 500-L; KTN 500; KTN 630; KTNV 500; KTNV 630; UN 500 094043 167 45 93 73-53 54 3,665 Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please send us the chuck. Forkardt J H G T 108 within 4 weeks

Draw-down jaws N, diagonally toothing Forkardt E M6 F D huck front side Tool group 21 Type 545-00 Draw-down jaws, 1 piece, without interchangeable clamping inserts, diagonally toothing huck Type Item no. Jaw length Jaw width Jaw height D E F Thread 3FN 175-42; F 160; KTN 160; KTNV 175 3FN 200-45; F 200; KTN 200; KTNV 200 3FN 250-72; F 250; KTN 250; KTN 280; KTNV 250; UN 250 3FN 315-82; 3FN 400-92; F 315; KTN 315; KTN 360; KTN 400; KTNV 315; KTNV 400; UN 315; UN 400 141037 84,4 20 43,5 15 11 22,5 M6 141038 84,4 20 43,5 15 32 22,5 M6 141039 98,4 22 47,5 15 12 22,5 M6 141040 98,4 22 47,5 15 48 22,5 M6 141041 118,7 26 58,5 20 12 29,5 M6 141042 118,7 26 58,5 20 58 29,5 M6 141043 136,4 32 63,9 20 12 29,5 M6 141044 136,4 32 63,9 20 72 29,5 M6 3FN 500-125; 3FN 630-125; F 400; F 141045 173,6 45 73,4 25 12 34,3 M6 500-L; KTN 500; KTN 630; KTNV 500; KTNV 630; UN 500 F 400 141046 173,6 45 73,4 25 77 34,3 M6 3FN 500-125; 3FN 630-125; F 500-L; KTN 500; KTN 630; KTNV 500; KTNV 630; UN 500 141048 173,6 45 73,4 25 110 34,3 M6 Interchangeable clamping inserts Forkardt Tool group 15 Type 545-60 Interchangeable clamping inserts, 1 piece, with claws Item no. Size Design ontents of delivery 151029 140 with claws piece 141049 160/200 with claws piece 141052 250/315 with claws piece 141055 400/500 with claws piece within 4 weeks 109

Interchangeable clamping inserts Forkhardt Tool group 15 Type 545-70 Interchangeable clamping inserts, 1 piece, with serrated toothing Item no. Size Design ontents of delivery 151039 140 serrated toothing piece 141050 160/200 serrated toothing piece 141053 250/315 serrated toothing piece 141056 400/500 serrated toothing piece Tool group 15 Type 545-80 Interchangeable clamping inserts, 1 piece, with heat treatable surface Item no. Size Design ontents of delivery 151040 140 with heat treatable surface piece 141051 160/200 with heat treatable surface piece Forkardt 141054 250/315 with heat treatable surface piece 141057 400/500 with heat treatable surface piece Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 110 within 4 weeks

law-type jaws, hardened, serration 90, groove 17-25,5 Forkardt 10 10 M M D H7 1 / 16 x 90 o Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 17-25,5 huck Type Item no. Jaw length Jaw height D Thread 3KTG 160; 3QL 160-38; 3QL 200-54; 3QL-KS 200-77; 3QLK 200-54; 3QLK-KS 200-77; G 160; KGH 160; KGH 175; KGHF 160; KGHF 175; KL 160; KS 160; KSF 175; KSH 160; KT 160; KTH 175; NH 160; NH 200; NHF 160 3KTG 160; 3QL 160-38; 3QL 200-54; 3QL-KS 200-77; 3QLK 200-54; 3QLK-KS 200-77; G 160; G 200; G 250; KG 200; KGH 160; KGH 175; KGH 200; KGHF 160; KGHF 175; KGHF 200; KL 160; KL 200; KLN 200; KS 160; KS 200; KS 250; KSF 175; KSH 160; KSH 200; KSHF 200; KT 160; KT 200; KTF 200; KTH 175; KTH 200; KTH 250; KTH 315; NH 160; NH 200; NHF 160; NHF 200; NHF 290; UVE 250 137031 67 53 45 17 M6 137032 65 46 45 17 M6 137033 55 39 45 17 M6 137034 50 31 45 17 M6 137035 55 27 45 17 M6 137036 65 19 45 17 M6 137037 65 26 45 17 M6 137038 55 24 45 17 M6 137039 55 40 45 17 M6 2KTN 250; 3KTN 250; 3QL 315/88; 3QLK 315/88; 4KTN 250; G 315; G 400; KG 250; KG 315; KL 250; KLN 250; KLN 315; KS 315; KS 400; KSH 250; KSH 315; KSH 400; KSHF 250; KSHF 315; KSHF 400; KT 250; KT 315; KTF 250; KTF 315; KTGF 250; NH 250; NH 315; NHF 250; NHF 290; NHF 315; NHF 400; UVE 315 137041 95 80 50 21 M6 137042 75 60 50 21 M6 137043 60 43 50 21 M6 137044 70 37 50 21 M6 137045 95 25 50 21 M6 137046 80 30 50 21 M6 Forkardt 3QL 400-126; 3QLK 400-126; KF 500; KG 400; KG 500; KL 400; KL 500; KLN 400; KLN 500; KS 500; KSH 500; KT 400; KT 500; KT 630; KTF 400; KTF 500; KTGF 400; KTGF 630; NH 400; NH 500; NH 630; NHF 400; NHF 500; NHF 630; UVE 400; UVE 500; UVE 630 137051 130 113 65 25,5 M6 137052 90 67 65 25,5 M6 137053 100 45 65 25,5 M6 137054 130 33 65 25,5 M6 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 147263 1 M5 5 7 139177 1 M5 8 7 298191 1 M5 10 7 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 within 4 weeks 111

law-type jaws, hardened, tongue and groove Forkardt 8 mm size 160/175 D 10 10 M6 M6 7 ( Size 400/500) 5 (Size 200-315) 4,5 (Size 160) Tool group 21 Type 544-00 Reversible claw-type top jaws, tongue and groove, 1 piece hardened huck Type Item no. Jaw length Jaw width Jaw height D 3FN 175-42; F+ 160; F 160; KTN 160; KTNV 175 137060 66 24 37,5 17 137061 66 20 37,5 61 137062 56 20 37,5 29 3FN 200-45; F+ 200; F 200; KTN 200; KTNV 200 137064 81 24 43 71 137065 66 24 43 38,5 137066 79 34 43 29,5 137067 81 34 43 71 137068 66 34 43 38,5 3FN 250-72; 3FN 315-82; F+ 250; F 250; KTN 250; KTN 280; KTN 315; KTNV 250; KTNV 315; UN 250; UN 315 137108 90 34 55 78 137109 72 34 55 38 137110 80 50 55 29 137111 90 50 55 78 Forkardt 3FN 400-92; 3FN 500-125; 3FN 630-125; F 315; F 400; F 500-L; KTN 360; KTN 400; KTN 500; KTN 630; KTNV 400; KTNV 500; KTNV 630; UN 400; UN 500 137112 72 50 55 38 137114 100 34 62 90 137115 86 34 62 42 137116 93 50 62 30 137117 106 50 62 90 137118 86 50 62 42 F+ 400; F+ 500 137119 124 50 62 39 137120 124 50 62 112 137121 100 50 62 48 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 112 within 4 weeks

Soft segment top jaws, serration 90 Forkardt Design I Design II Tool group 21 Type 9052 Segment top jaws, 3 jaw set, can be hardened, serration 1 / 16 x90 - material: 15 huck Type 3-jaw set N K J Material Design Weight approx. kg 3KTG 160; 3KTN 160; 3QL 160-38; 3QL-LS 160-30; 3QLK 160-38; KGH 160; KGH 175; KGHF 160; KGHF 175; KL 160; KS 160; KSF 175; KSH 160; KSPS 160; KTH 160; KTH 175; NH 160; NH 175; NHF 160; NHF 175; UVE 160 1032909 120 60 60 17 15 22 steel Design I 9 1032910 120 64 64 17 15 22 aluminium Design I 3,2 1032911 169 76 76 17 21,5 22 steel Design II 13 1032912 169 76 76 17 21,5 22 aluminium Design II 4 3KTG 200; 3KTN 200; 3QL 200-54; 3QL-KS 200-77; 3QL-LS 200-41; 3QLK 200-54; 3QLK-KS 200-77; KG 200; KGH 200; KGHF 200; KLN 200; KP 200; KS 200; KSF 200; KSH 200; KSHF 200; KSPS 200; KT 200; KTGF 200; KTH 200; NH 200; NHF 200; QL-G 200; UVE 200 3KTG 200; 3KTN 200; 3QL 200-54; 3QL-KS 200-77; 3QL-KS 250-101; 3QL-LS 200-41; 3QLK 200-54; 3QLK-KS 200-77; 3QLK-KS 250-101; KG 200; KGH 200; KGHF 200; KL 250; KLN 200; KP 200; KS 200; KS 250; KSF 200; KSH 200; KSHF 200; KSHF 250; KSPS 200; KT 200; KTGF 200; KTH 200; NH 200; NHF 200; NHF 250; NHF 290; QL-G 200; UVE 200; UVE 250 3QL-KS 250-101; 3QLK-KS 250-101; KL 250; KS 250; KSHF 250; NHF 250; NHF 290; UVE 250 1032913 150 64 76 17 15 22 steel Design I 14 1032914 150 64 76 17 15 22 aluminium Design I 5 1032915 210 76 95 17 25 22 steel Design II 21 1032916 210 76 95 17 25 22 aluminium Design II 7 1032917 170 64 89 17 20 22 steel Design I 20 1032918 170 64 89 17 20 22 aluminium Design I 7 Forkardt within 4 weeks 113

www.jawfinder.biz Quickly and simply to the right clamping jaw! Only three steps to the right clamping jaw Find the right jaw also for all common manufacturers hoose from a broad range of jaws convenient enquiry function

ison Soft top jaws, serration 90 116 Soft top jaws, without mounting holes, serration 90 117 Soft top jaws, serration 60 118 Soft top jaws, tongue and groove, 120 bevelled 119 Reversible top jaws, hardened, serration 90 120 Reversible top jaws, hardened, serration 60 121 law-type jaws, hardened, serration 90 122 law-type jaws, hardened, serration 60 123 ison Errors and corrections are reserved!

Soft top jaws, serration 90 ison G F G G F 30 o Q Tool group 21 Type 543/538 Soft top jaws, set, can be hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G Q Serration Weight approx. kg 2409-130-32 045794 046402 046450 53 22,5 30 10 20 12 3 1/16 x 90 0,223 2405-160-45; 2409-200-66; 2488-200 133147 133152 133157 66,7 36,5 53 17 36 19-1/16 x 90 0,7 2405-200-52; 2409-250-91; 2409-315-91; 2488-200 133148 133153 133158 75 36,5 53 17 44 19-1/16 x 90 0,88-461712 - 75 36,5 65 17 44 19-1/16 x90 3,4-585021 - 90 36,5 40 17 47 23 5 1/16 x90 2,7-894365 - 90 40 60 17 43 22 5 1/16 x90 4,2-894357 - 98 35 40 17 61 22-1/16 x90 2,9 2405-250-75; 2405-315-91 133149 133154 133159 95 45 54,5 21 55 25-1/16 x 90 1,4-585531 - 110 50 55,5 21 60 30-1/16 x90 6,3 2405-315-91 133150 133155 133160 103 50 80 21 62 25-1/16 x 90 2,58-894366 - 120 50 80 21 62 28-1/16 x90 8,9 2405-500-160; 2405-630-165; 2405-800-255; 2500-400-140; 2500-630-275-SPR; 2501-400-140 ZW; 2501-570-230 133151 133156 133161 130 50 80 25,5 79 31-3/32 x 90 3,1-118004 - 130 50 80 25,5 20 35-3/32 x90 3,1 ison D +0,05 p 537-02 = 3 mm 116 within 4 weeks

Soft top jaws, without mounting holes, serration 90 ison Tool group 21 Type 543-28 Soft top jaws, piece, without mounting holes, can be hardened, serration 90 - material: 16 Mnr 5 huck Type Item no. Jaw length Jaw width Jaw height D Serration Weight approx. kg 2409-130-32 883005 52 26,5 38 10 1/16 x90 0,4 2409-160-46 631327 55 26,5 38 12 1/16 x90 0,4 2105-160-45; 2405-160-45; 2409-200-66; 2488-200; 2605-160-45 2105-160-45; 2105-200-52; 2405-160-45; 2405-200-52; 2409-200-66; 2409-250-91; 2409-315-91; 2488-200; 2605-160-45; 2605-200-52 2105-160-45; 2405-160-45; 2409-200-66; 2488-200; 2605-160-45 2105-160-45; 2105-200-52; 2405-160-45; 2405-200-52; 2409-200-66; 2409-250-91; 2409-315-91; 2488-200; 2605-160-45; 2605-200-52 2105-200-52; 2405-200-52; 2409-250-91; 2409-315-91; 2488-200; 2605-200-52 2105-250-75; 2105-315-91; 2405-250-75; 2405-315-91; 2488-315; 2605-250-75; 2605-315-91 667392 90 36,5 53 17 1/16 x90 1,3 155423 105 36,5 53 17 1/16 x90 1,5 681620 120 36,5 53 17 1/16 x90 1,7 155424 90 45 54,5 17 1/16 x90 1,7 155425 105 45 54,5 17 1/16 x90 2 155426 120 45 54,5 17 1/16 x90 2,2 155427 90 50 80 17 1/16 x90 2,6 155428 120 45 54,5 21 1/16 x90 2,2 155429 150 45 54,5 21 1/16 x90 2,7 667208 120 50 80 21 1/16 x90 3,5 155430 150 50 80 21 1/16 x90 4,4 2405-500-160; 2405-630-165; 2405-800-255; 2500-400-140; 2500-630-275-SPR; 2501-400-140 ZW; 2501-570-230 155431 155 50 80 25,5 1/16 x90 4,4 155432 155 68 89 25,5 1/16 x90 7 155433 155 68 89 25,5 1/16 x90 8,7 ison within 4 weeks 117

Soft top jaws, serration 60 ison G F Tool group 21 Type 543-32 Soft top jaws, 3-jaw set, can be hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G Serration Weight approx. kg 2405-135-34K 154863 54 23 29 10 28 14 1,5 x 60 0,25 2405-160-45K 154865 72 30,5 43 12 37 20 1,5 x 60 0,5 2405-200-52K 154867 95 35 45,5 14 46 25 1,5 x 60 0,9 2405-250-75K 154869 110 50 45 16 50 30 1,5 x 60 1,7 2405-315-91K 154871 130 50 55,5 21 52 30 1,5 x 60 1,9 ison 4,5 D H7 118 within 4 weeks

ison Soft top jaws, tongue and groove, 120 bevelled 538-00 M +0,03 Q 538-12 D 0,03 G 30 o Tool group 21 Type 549/538 Soft top jaws, set, can be hardened, tongue and groove 120 bevelled, material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set Jaw length Jaw width Jaw height D F G M Q Weight approx. kg 2406-160 123359 123358 72,7 36,5 53 10 32,2 25 16 3 0,72 2406-190; 2406-225 123431 123430 90,3 36,5 53 12 45,3 30 16 6 1 Special Jaws for Lathe hucks High flexibility and individual clamping options With our own construction department and production we are the perfect partner concerning gripping solutions and clamping problems. For designing the various styles and forms we rely on our experience of more than 100 years. Drill hucks Live enters Lathe hucks Vices utomation Technology Power huck Technology Mandrels Tool lamping Systems Special Design ison www.roehm.biz within 4 weeks 119

ison Reversible top jaws, hardened, serration 90 G G F ison D H7 M Tool group 21 Type 543/538 Reversible top jaws, set, hardened, serration 90 - material: 16 Mnr 5 huck Type 2-jaw set 3-jaw set 4-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg 2409-130-32 046545 046544 046546 56 26 37,5 10 10 12 10 1/16 x 90 0,13 2405-160-45; 2405-200-52; 2409-200-66; 2409-250-91; 2409-315-91; 2488-200 046429 046408 046456 68 34,7 45 17 17 19 10 1/16 x 90 0,35 118521 118522 118523 75 36 49 17 21,5 19 12 1/16 x 90 0,46-609592 - 80 36 37 17 41 19 12 1/16 x 90 0,235-585022 - 81 40 49 17 19 23 12 1/16 x90 1,5 2405-250-75; 2405-315-91; 2488-315 046435 046414 046462 103,5 50 58 21 33,5 25 14 1/16 x 90 1,13-585533 - 104,5 44,5 54 21 25,5 30 13 1/16 x90 3,2 2405-500-160; 2405-630-165; 2405-800-255; 2500-400-140; 2500-630-275-SPR; 2501-400-140 ZW; 2501-570-230 046447 037531 046474 135 68 65 25,5 48 31+31 26 3/32 x 90 2,4 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. 120 within 4 weeks

Reversible top jaws, hardened, serration 60 ison G G ison D H7 M Tool group 21 Type 543-31Reversible top jaws, 3-jaw set, hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg 2405-135-34K 154814 1) 54 23 27,5 10 13 14 10 1,5 x 60 0,16 2405-160-45K 154674 1) 66 34,7 36 12 12,5 20 12 1,5 x 60 0,3 2405-200-52K 154676 81 36 49 14 17,5 25 12 1,5 x 60 0,6 2405-250-75K 154678 99,5 44,5 54 16 25,5 30 13 1,5 x 60 1,2 2405-315-91K 154816 1) 103 50 55,5 21 22,5 30 17 1,5 x 60 1,5 1) one step only Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 121

law-type jaws, hardened, serration 90 ison 10 10 M M D H7 1 / 16 x 90 o Tool group 21 Type 544-50 law-type jaws, 1 piece, hardened, serration 90 - width of the groove 10-25,5 huck Type Item no. Jaw length Jaw height D Thread 2409-130-32 147259 50 41 27 10 M5 147261 44 22 27 10 M5 2105-160-45; 2105-200-52; 2405-160-45; 2405-200-52; 2409-200-66; 2409-250-91; 2409-315-91; 2605-160-45; 2605-200-52 137031 67 53 45 17 M6 137032 65 46 45 17 M6 137033 55 39 45 17 M6 137034 50 31 45 17 M6 137035 55 27 45 17 M6 137036 65 19 45 17 M6 137037 65 26 45 17 M6 137038 55 24 45 17 M6 137039 55 40 45 17 M6 2105-250-75; 2105-315-91; 2405-250-75; 2405-315-91; 2605-250-75; 2605-315-91 137041 95 80 50 21 M6 137042 75 60 50 21 M6 137043 60 43 50 21 M6 137044 70 37 50 21 M6 137045 95 25 50 21 M6 137046 80 30 50 21 M6 2405-500-160; 2405-630-165; 2405-800-255; 2500-400-140; 2500-630-275-SPR; 2501-400-140 ZW; 2501-570-230 137051 130 113 65 25,5 M6 137052 90 67 65 25,5 M6 137053 100 45 65 25,5 M6 137054 130 33 65 25,5 M6 ison Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 147263 1 M5 5 7 139177 1 M5 8 7 298191 1 M5 10 7 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 122 within 4 weeks

law-type jaws, hardened, serration 60 ison Tool group 21 Type 543-33 law-type jaws, 1 piece, hardened, serration 60 - width of the groove 12 huck Type Item no. Jaw length Jaw height D Thread 2105-135-34K; 2405-160-45K; 2605-160-45K 156025 67 53 45 12 M6 156027 65 46 45 12 M6 156029 55 40 45 12 M6 161189 55 24 45 12 M6 2105-250-75K; 2405-250-75K; 2605-250-75K 156099 95 80 50 16 M6 156101 75 60 50 16 M6 156103 60 43 50 16 M6 156105 70 37 50 16 M6 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 ison 10 10 M M D H7 1,5 x 60 o within 4 weeks 123

In this jaw-catalogue RÖHM presents a comprehensive clamping jaw program. big number of jaw types offer nearly all possibilities of clamping in lathe chucks, independent chucks and power chucks for both, the industrial and the artisan production. Find your clamping jaw quickly and simply at www.jawfinder.biz

Kitagawa Soft top jaws, serration 60 126 Reversible top jaws, hardened, serration 60 127 law-type jaws, hardened, serration 60 128 Soft segment top jaws, serration 60 129 Errors and corrections are reserved! Kitagawa

Soft top jaws, serration 60 Kitagawa G F D H7 4,5 Tool group 21 Type 543-32 Soft top jaws, 3-jaw set, can be hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G Serration Weight approx. kg -204; -205; N-04; N-05; NL04 154863 54 23 29 10 28 14 1,5 x 60 0,25-206; -2065; 206; L-206; 154865 72 30,5 43 12 37 20 1,5 x 60 0,5 L2065; S306; S3065; HOH-206; ML06; N-06; N-0605; NL06; NL0605-208; -2086; 208; L-208; 154867 95 35 45,5 14 46 25 1,5 x 60 0,9 L2086; S308; S3086; HOH-208; ML08; N-08; N-0806; NL08; NL0806-2086; N-08 159780 95 35 45,5 17 46 25 1,5 x 60 2,7-1006; -210; -2106; -2108; 210; 2106; 2108; L-210; L2106; L2108; S310; S3106; S3108; HOH-10K; N-10; N-1008; NL10; NL1006; NL1008-212; -2126; -2128; 212; 2126; 2128; L-212; L2126; L2128 154869 110 50 45 16 50 30 1,5 x 60 1,7 154871 130 50 55,5 21 52 30 1,5 x 60 1,9 Kitagawa 126 within 4 weeks

Kitagawa Reversible top jaws, hardened, serration 60 G G D H7 M Tool group 21 Type 543-31 Reversible top jaws, 3-jaw set, hardened, serration 60 - material: 16 Mnr 5 huck Type 3-jaw set Jaw length Jaw width Jaw height D F G M Serration Weight approx. kg -204; -205; 154814 1) 54 23 27,5 10 13 14 10 1,5 x 60 0,16 N-04; N-05; NL04-206; -2065; 206; 2065; L- 154674 1) 66 34,7 36 12 12,5 20 12 1,5 x 60 0,3 206; L2065; S306; S3065; HOH-206; ML06; N-06; N-0605; NL06; NL0605-208; -2086; 208; 2086; L- 154676 81 36 49 14 17,5 25 12 1,5 x 60 0,6 208; L2086; S308; S3086; HOH-208; ML08; N-08; N-0806; NL08; NL0806-1006; 154678 99,5 44,5 54 16 25,5 30 13 1,5 x 60 1,2-210; -2106; -2108; 210; L- 210; L2106; L2108; S310; S3106; S3108; HOH-10K; N-10; N-1008; NL10; NL1006; NL1008-212; -2126; -2128; 154816 1) 103 50 55,5 21 22,5 30 17 1,5 x 60 1,5 212; 2126; 2128; L-212; L2126; L2128; HOH-12K; N-12 1) one step only Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. within 4 weeks 127 Kitagawa

law-type jaws, hardened, serration 60 Kitagawa 10 10 M M D H7 Tool group 21 Type 543-33 law-type jaws, 1 piece, hardened, serration 60 - width of the groove 12/16 1,5 x 60 o huck Type Item no. Jaw length Jaw height D Thread -206; -2065; 206; 2065; L-206; L2065; S306; S3065; HOH-206; ML06; N-06; N-0605; NL06; NL0605-1006; -210; -2106; -2108; 210; 2106; 2108; L-210; L2106; L2108; S310; S3106; S3108; HOH-10K; N-10; N-1008; NL10; NL1006; NL1008 156025 67 53 45 12 M6 156027 65 46 45 12 M6 156029 55 40 45 12 M6 161189 55 24 45 12 M6 156099 95 80 50 16 M6 156101 75 60 50 16 M6 156103 60 43 50 16 M6 156105 70 37 50 16 M6 Tool group 15 Type 544-00 Interchangeable workpiece rests, 1 piece, in different lengths Item no. Size M H SW 289188 2 M6 5 9 138950 2 M6 10 9 725581 2 M6 15 9 Kitagawa 128 within 4 weeks

Soft segment top jaws, serration 60 Kitagawa Design I Design II Tool group 21 Type 9052 Segment top jaws, 3 jaw set, can be hardened, serration 1,5x60 / 3x60 - material: 15 huck Type 3-jaw set N K J Material Design Weight approx. kg -206; -2065; L-206; T206; HOH-206; N-06; N-0605; NL06 1032921 120 60 60 12 15 20 steel Design I 9 1032922 120 64 64 12 15 20 aluminium Design I 3,2 1032923 169 76 76 12 20 20 steel Design II 13 1032924 169 76 76 12 20 20 aluminium Design II 4-208; -2086; L-208; T208; HOH-208; N-08; N-0806; NL08 1032925 150 64 76 14 15 25 steel Design I 14 1032926 150 64 76 14 15 25 aluminium Design I 5 1032927 210 76 95 14 25,5 25 steel Design II 20 1032928 210 76 95 14 25,5 25 aluminium Design II 7-1006; -210; -2106; -2108; L-210; T210; HOH-10K; N-10; N-1008; NL10 1032929 170 64 89 16 20 30 steel Design I 20 1032930 170 64 89 16 20 30 aluminium Design I 7 1032931 254 76 111 16 27 30 steel Design II 29 1032932 254 76 111 16 27 30 aluminium Design II 10 N-12; N-1206; N-1208; NL12 1032933 240 76 118 15 30 30 steel Design I 28 1032934 240 76 118 18 30 30 aluminium Design I 10 1032935 304 76 133 18 34 30 steel Design II 41 1032936 304 76 133 18 34 30 aluminium Design II 14-212; -2126; -2128; L-212; T212 1032937 240 76 118 21 30 30 steel Design I 28 1032938 240 76 118 21 30 30 aluminium Design I 10 1032939 304 76 133 21 34 30 steel Design II 41 1032940 304 76 133 21 34 30 aluminium Design II 14-15; -1508; -1511; -18; -1811; HOH-15K 1032941 280 76 152 22 30 30 steel Design I 40 1032942 280 76 152 22 30 30 aluminium Design II 13 1032943 381 76 171 22 34 30 steel Design II 56 1032944 381 76 171 22 34 30 aluminium Design II 19 within 4 weeks 129 Kitagawa

www.jawfinder.biz Quickly and simply to the right clamping jaw! Only three steps to the right clamping jaw Find the right jaw also for all common manufacturers hoose from a broad range of jaws convenient enquiry function

Kitagawa RÖHM ccessories Jaw cutting attachment V, for 3-jaw chucks 132 hecklist for special jaws 134 Errors and corrections are reserved! RÖHM ccessories

V Jaw cutting attachment For turning unhardened jaws and grinding hardened jaws, with reversible and steppless adjustable setting jaws. The V cutting attachment is mainly used for turning the inside and outside diameters of soft jaws on 3-jaw chucks. It permits the chuck to be adjusted to the condition in which the work piece will be gripped within a few seconds (pretightening). This assures positive gripping and accurate concentricity of the machined clamping surfaces of the chuck jaws in the tightened condition. Technical features: - only applicable with base jaws (G) and top jaws () Tool group 09 Type 091 Jaw cutting attachment for three-jaw chucks Item no. Size For chuck Load max. External Ø Inner Ø Overhang distance Thread Weight size Ø J Ø approx. kg 220206 1) 0 125 15 153 110 50-115 150-215 20 M5 1,6 220207 1 200 30 176 110 35-125 170-260 31 M8 3,4 220208 2 250 30 215 135 70-140 215-285 31 M8 5 220209 3 250 30 244 162 100-175 240-315 31 M8 5,7 220210 4 315 30 290 208 145-215 290-360 31 M8 6,9 220211 5 400 40 342 260 160-270 330-440 31 M10 8,5 1) light-duty design RÖHM ccessories 132 within 4 weeks

www.jawfinder.biz Questionnaire for chuck jaws in special design Sales gent Date Delivery date Quantity ompany name ontact person Phone Department Fax Workpiece to be clamped Workpiece name: Material Sample workpiece will be sent NOTE: Please mark or color the clamping and locating area on the drawing of the workpiece. Raw clamping surface Prepared Ready lamping mark permitted Yes No Please mark the machining area. Workpiece machining Deformation permitted mm Not permitted Turning Grinding Drilling utting speed m/min V-onstant Yes Roughing Finishing Milling No Feed rate mm/u With coolant Without coolant Other utting depth mm Max. application speed min -1 Machining of the backside? Indicate dimensions for space Max. speed of machine min -1 Torque Nm or danm Design of jaws hard soft External clamping Hard Rigid Smooth laws Quick-acting change system Internal clamping Soft Pendular Diamond serration arbide insert Square-clamping Dimension mm lamping depth mm Details on the chuck Manufacturer Type/Size Number of jaws Weight Height Jaw stroke Jaw interface Slot and serration (in case of a special chuck please enclose a drawing) Width of slot mm Serration 1/16 x 90 3/32 x 90 1.5 x 60 Modul 2 Special serration Tongue and groove 6-pointclamping radial 12-pointclamping radial Pendulum jaws, axially Pendulum jaws axially and radially Details of the machine Max. swing-ø Machining direction Horizontally Vertically Stationary Rotating mm Loading Manually utomatically (indicate disturbing edges for the handling device!) alancing Q= 6.3 to VDI 2060 Yes With workpiece No Without workpiece NOTE: In case of an order please send in a workpiece sample Grinding lamping-ø and workpiece stop preground for finish grinding on the matching chuck at the customer lamping-ø and workpiece stop ground or nukked in a RÖHM-device, T.I.R.-accuracy 0,03mm onsidet the runout of the chuck RÖHM GmbH Heinrich-Röhm-Straße 50 89567 Sontheim/renz Tel 0049 73 25-16-0 Fax 0049 73 25-16-510 spannbacken@roehm.biz www.roehm.biz

www.jawfinder.biz Questionnaire for chuck jaws in special design Sales gent Date Delivery date Quantity ompany name ontact person Phone Department Fax Workpiece to be clamped Workpiece name: Material Sample workpiece will be sent NOTE: Please mark or color the clamping and locating area on the drawing of the workpiece. Raw clamping surface Prepared Ready lamping mark permitted Yes No Please mark the machining area. Workpiece machining Deformation permitted mm Not permitted Turning Grinding Drilling utting speed m/min V-onstant Yes Roughing Finishing Milling No Feed rate mm/u With coolant Without coolant Other utting depth mm Max. application speed min -1 Machining of the backside? Indicate dimensions for space Max. speed of machine min -1 Torque Nm or danm Design of jaws hard soft External clamping Hard Rigid Smooth laws Quick-acting change system Internal clamping Soft Pendular Diamond serration arbide insert Square-clamping Dimension mm lamping depth mm Details on the chuck Manufacturer Type/Size Number of jaws Weight Height Jaw stroke Jaw interface Slot and serration (in case of a special chuck please enclose a drawing) Width of slot mm Serration 1/16 x 90 3/32 x 90 1.5 x 60 Modul 2 Special serration Tongue and groove 6-pointclamping radial 12-pointclamping radial Pendulum jaws, axially Pendulum jaws axially and radially Details of the machine Max. swing-ø Machining direction Horizontally Vertically Stationary Rotating mm Loading Manually utomatically (indicate disturbing edges for the handling device!) alancing Q= 6.3 to VDI 2060 Yes With workpiece No Without workpiece NOTE: In case of an order please send in a workpiece sample Grinding lamping-ø and workpiece stop preground for finish grinding on the matching chuck at the customer lamping-ø and workpiece stop ground or nukked in a RÖHM-device, T.I.R.-accuracy 0,03mm onsidet the runout of the chuck RÖHM GmbH Heinrich-Röhm-Straße 50 89567 Sontheim/renz Tel 0049 73 25-16-0 Fax 0049 73 25-16-510 spannbacken@roehm.biz www.roehm.biz

The headquarter: our parent plant in Sontheim/renz. The RÖHM parent plant is located in Sontheim/renz. In this ultra-modern production facility comprising 41,000 m², optimum conditions have been achieved in order to solve the extensive range of discerning construction and production tasks making the company even better, faster and more efficient in the future. Sontheim/renz ll national and international activities are planned and co-ordinated at the administrative headquarters in Sontheim. Thanks to the excellent infrastructure and transport routes available, this location is ideal for a company relying on perfect product quality as well as maximum flexibility. Furthermore, the region around Sontheim offers another key basis for the success of our company: it is rich in quality awareness and motivated employees with the result that we are ideally prepared for the challenges of the future. The parent plant uniquely unites mass production, serial production and customised individual production under a single roof.

Key locations for the company: Dillingen and St. Georgen. Such strong growth on the part of the RÖHM Group is also obviously associated with higher requirements on development and production capacities. The demands of today and tomorrow can be complied with the two facilities in Dillingen and St. Georgen. Dillingen/Danube St. Georgen Plant: Dillingen/Danube This branch plant in Dillingen was put into operation by the RÖHM Group as early as 1953. Thanks to extremely positive development, the plant is subject to constant expansion and modernisation. For this reason, new modern production facilities were built in 1982 and 1991. In 2007 RÖHM built a new production hall for two portal turning and milling machines. This enables machining of workpieces up to 4 metres in length which will secure a leading market position for the RÖHM brand in the future. More than 300 employees are primarily involved in engineering and manufacturing lathe chucks, machine vices and special clamping equipment for turning and milling machinery as well as for machining centres. Engineering and sales department St. Georgen part from standard mandrels, tailor-made solutions for a wide variety of requirements are also manufactured here in this small but accomplished high-tech forge. RÖHM retains mechanical or power-operated mandrels, sliding jaw mandrels and hydraulic mandrels for its customers for tensioning workpieces in drill holes or interior contours.

Manufacturing and distribution gents lways close to our customers. With locations all around the world. ustomer orientation at RÖHM has less to do with marketing than with attitude. We consider customer proximity as an intensive dialogue with our partners as well as direct presence on key international markets. The RÖHM manufacturing and distribution bases: RÖHM IND. E OM. DE FERRMENTS DE FIXÇÃO LTD. razil ROEHM hina o., Ltd. hina RÖHM Værktoj. S. Denmark RÖHM S.. R. L. France ROHM (Great ritain) LTD. Great ritain RÖHM SLOVKI S.R.O. Slovakia ROHM INDI PVT. LTD. India RÖHM Italia S. R. L. Italy RÖHM Spanntechnik G Switzerland RÖHM Iberica S.. Spain ROHM Products of merica US

Your contacts at RÖHM. Manufacturing and distribution bases Germany: RÖHM GmbH Heinrich-Röhm-Straße 50 89567 Sontheim/renz Tel 0049 73 25 16-0 Fax 0049 73 25 16-510 info@roehm.biz www.roehm.biz RÖHM GmbH Röhmstraße 6 89407 Dillingen Tel 0049 90 71 5 08-0 Fax 0049 90 71 5 08-174 infodlg@roehm.biz RÖHM GmbH Feldbergstr. 5 78112 St. Georgen Tel 0049 77 24 94 68 12 Fax 0049 77 24 51 89 Mobil 0049 152 22 88 70 50 stg.info@roehm.biz razil: RÖHM IND. E OM. DE FERRMENTS DE FIXÇÃO LTD. Rod. Raposo Tavares, Km 14, s/n 0 loco e - Parte -Jardim andeirantes EP 05576-900 - São Paulo Tel 0055 11 37 32 22 22 Fax 0055 11 37 35 30 97 vendas@rohm.com.br hina: ROEHM hina o., Ltd. uilding 3, No. 388 Xinrun Road Xinqiao Industrial Zone, Songjiang District Shanghai. PR. Post ode: 201612 Tel 0086-21 - 37 70 53 95 Fax 0086 21 37 70 53 76 roehmcn@roehm.biz ROEHM WEID MHINERY (Shandong) o. Ltd. (Joint Venture) DD: 2 Zhonghan Road Manshan Town Wendeng Shandong hina 264414 Tel 0086 631 8 54 99 86 Fax 0086 631 8 54 50 18 lts@weidapeacock.com Denmark: RÖHM Værktoj. S. Gunnekær 2, 2610 Rødovre Tel 0045 36 41 22 66 Fax 0045 36 41 44 72 info@roehm.dk France: RÖHM S.. R. L. 325, rue Paul Langevin 60740 St. Maximin Tel 0033 344 64 10 00 Fax 0033 344 64 00 68 fr.roehm@roehm.biz www.rohm.fr Great ritain: ROHM (Great ritain) LTD. Unit 12 the ashway centre Elm cresent Kingston-upon-Thames Surrey KT 2 6 HH Tel 0044 20 85 49 66 47 Fax 0044 20 85 41 17 83 rohmgb@roehm.biz www.uk.roehm.biz India: ROHM INDI PVT. LTD. Plot No. -53(), Nallekandernahall Peenya 2nd Stage Industrial rea 2nd Main Road 560058 angalore India Tel 0091 80 41 49 29 07 Fax 0091 80 28 36 76 56 kthomas_64@yahoo.com Italy: RÖHM Italia S. R. L. Via rescia 24/ 20063 ernusco S. Naviglio Tel 0039 02 92 10 35 31 Fax 0039 02 92 10 17 53 rohmitalia@roehm.biz www.roehm-italia.it Slovakia: RÖHM Slovakia s.r.o. Partizanska 73 95701 anovce nad ebravou Slovakia Tel 00421 3 87 60 02 22 Fax 00421 3 87 60 02 24 info@roehm.sk Spain + Portugal: RÖHM Iberica S.. /Rejas, No. 9 Nave 11 D 28022 Madrid Tel 0034 91 3 13 57 90 Fax 0034 91 3 13 57 93 rohmiberica@roehm.biz www.roehm-iberica.es Switzerland: RÖHM Spanntechnik G Feldstraße 39, 3360 Herzogenbuchsee Tel 0041 629 56 30 20 Fax 0041 629 56 30 29 roehmch@roehm-spanntechnik.ch www.ch.roehm.biz US: ROHM Products of merica 5155 Sugarloaf Parkway, Suite K Lawrenceville, G 30043 Tel 001 770 963-8440 Fax 001 770 963-8407 rohmusa@roehm.biz www.us.roehm.biz Presence on all continents from for ustralia to V for Venezuela. You can receive the contact information of our worldwide representations easily through www.roehm.biz

Sales gents in Germany lamping technology - manual - aden-württemberg: Werner Schmautz Tel. 0 78 02 / 98 27 51, Fax 0 78 02 / 7 00 94 27 Mobil 0152 / 22 88 70 23 E-mail: werner.schmautz@roehm.biz ayern (south): Dieter Rabus Tel. 0 73 54 / 9 37 49 74, Fax 0 73 47 / 9 37 49 75 Mobil 0152 / 22 88 70 24 E-mail: dieter.rabus@roehm.biz ayern (north): Gerhard Häutle Tel. 0 90 71 / 7 22 03 Fax 0 90 71 / 7 22 03 Mobil 0152 / 22 88 70 15 E-mail: gerhard.haeutle@roehm.biz Hessen: Joachim Nagel Tel. 0 60 45 / 98 39 00 Fax 0 60 45 / 98 39 01 Mobil 0171 / 6 20 91 59 E-mail: joachim.nagel@roehm.biz Niedersachsen: Reiner Maahs Tel. 0 52 31 / 8 73 26 Fax 0 52 31 / 8 73 26 Mobil 0152 / 22 88 70 16 E-mail: reiner.maahs@roehm.biz Nordrhein-Westfalen: Ralf Schnichels Tel. 0 21 61 / 9 99 72 43, Fax 0 21 61 / 9 99 72 47 Mobil 0152 / 22 88 70 25 E-mail: ralf.schnichels@roehm.biz Thorsten Nolte Tel. 0 27 21 / 12 01 82 Fax: 0 27 21 / 71 70 69 Mobil 0152 / 22 88 70 31 E-mail: thorsten.nolte@roehm.biz erlin, Mecklenburg-Vorpommern, randenburg, Sachsen-nhalt: Hendrik Seifert please see - power operated - Sachsen, Sachsen-nhalt,Thüringen: Thomas Fischer please see - power operated - Hamburg, remen, Schleswig-Holstein: Michael iß Tel. 0 431 / 3 97 09 59, Fax: 0 431 / 3 97 09 60 Mobil 0152 / 22 88 70 27 E-mail: michael.biss@roehm.biz utomation Technology Germany / Europe Robert aß Tel. 0 73 22 / 91 13 37 Fax 0 73 22 / 91 13 38 Mobil 0152 / 22 88 70 33 E-mail: robert.bass@roehm.biz lamping technology - power operated - aden-württemberg: Michael Schmitz Tel. 00 33 / 388 72 04 03 Fax 00 33 / 173 76 87 00 Mobil 00 49 (0)152 / 22 88 70 18 E-mail: michael.schmitz@roehm.biz Michael Hartmann Tel. 0 90 73 / 91 41 6 Fax 0 90 73 / 91 41 7 Mobil 0152 / 22 88 70 28 E-mail: michael.hartmann@roehm.biz Frank Stier Tel. 0 74 26 / 91 37 70, Fax: 0 74 26 / 91 38 84 Mobil 0152 / 22 88 70 19 E-mail: frank.stier@roehm.biz Richard Sedlak Tel. 0 70 21 / 94 98 97 0 Fax. 0 70 21 / 94 90 72 Mobil 0152 / 22 88 70 30 E-Mail: richard.sedlak@roehm.biz ayern (south): Dieter az Tel. 08649 / 98 63 75 Fax. 08649 / 98 63 76 Mobil 0152 / 22 88 70 26 E-mail: dieter.baz@roehm.biz ayern (north): hristian M. Merkel Tel. 0 91 61 / 66 41 39 Fax 0 91 61 / 66 41 45 Mobil 0152 / 22 88 70 14 E-mail: christian.merkel@roehm.biz erlin, Mecklenburg-Vorpommern, randenburg, Sachsen-nhalt: Hendrik Seifert Tel. 0 30 / 70 07 24 59 Fax 0 30 / 70 07 24 59 Mobil 0152 / 22 88 70 32 E-mail: hendrik.seifert@roehm.biz Hessen: Klaus Dieter Hofmann Tel. 0 64 06 / 90 67 40 Fax 0 64 06 / 90 67 43 Mobil 0152 / 22 88 70 29 E-mail: k.d.hofmann@roehm.biz Niedersachsen: Reiner Maahs please see - manual - Hamburg, remen, Schleswig-Holstein: Michael iß please see - manual - Nordrhein-Westfalen: Friedhelm Schneider Tel. 0 27 62 / 49 07 28 Fax 0 27 62 / 49 07 29 Mobil 0152 / 22 88 70 17 E-mail: friedhelm.schneider@roehm.biz Thorsten Nolte please see - manual - Sachsen, Sachsen-nhalt,Thüringen: Thomas Fischer Tel. 0 37 41 / 52 13 56 Fax 0 37 41 / 52 97 70 Mobil 0152 / 22 88 70 10 E-mail: thomas.fischer@roehm.biz Mandrel Technology Germany Thomas Haas Tel. 0 77 25 / 91 48 95 Fax 0 77 25 / 91 48 96 Mobil 0152 / 22 88 71 20 E-mail: thomas.haas@roehm.biz gents worldwide rgentina: Himaq S.R.L., Venezuela 3652, 1603 Villa Martelli Prov. uenos ires Tel. 00 541 / 147 093 505, Fax 00 541 / 147 093 472 E-mail: himaq@himaq.com.ar ustralia: White International Pty. Ltd., PO ox 304 Milperra LPO NSW 2214 Tel. 00 61 / 2 97 83 60 00 Fax 00 61 / 2 97 83 60 01 E-mail: sales@whiteint.com.au ustria: Richard Schörkhuber Lichtenhof 2 b 8511 St. Stefan ob Stainz Tel. 00 43 / 34 63 / 8 15 10 Fax 00 43 / 34 63 / 8 15 60 Mobil 00 43 / 664 / 9 23 77 10 E-mail: richard.schoerkhuber@roehm.biz Schachermayer GmbH, Schachermayer Str. 2 Postfach 3000, 4021 Linz Tel. 00 43 / 732 / 65 99-0, Fax 00 43 / 732 / 65 99 14 44 E-mail: maschinenmetall@schachermayer.at Lackner u. Urnitsch GmbH ahnhofgürtel 37 8020 Graz Tel. 00 43 / 316 / 71 14 80-0 Fax 00 43 / 316 / 71 14 80 39 E-mail: lackner@urnitsch.at Haberkorn Ulmer GmbH Hohe rücke 6961 Wolfurt Tel. 00 43 / 55 74 / 69 5-0 Fax 00 43 / 55 74 / 69 5-99 E-mail: info.wolfurt@haberkorn.com Metzler GmbH u. o. KG Oberer Paspelsweg 6-8 6830 Rankweil Tel. 00 43 / 55 22 / 7 79 63-0 Fax 00 43 / 55 22 / 7 79 63-6 E-mail: office@metzler.at elgium: (lamping technology - manual -) ELTRY ergensesteenweg 189 1600 Sint-Pieters-Leeuw Tel. 00 32 / 25 43 68 90 Fax 00 32 / 25 38 59 10 E-mail: info@beltracy.be www.beltracy.be (lamping technology - power operated -) RÖHM S..R.L. 325, rue Paul Langevin 60740 St. Maximin France Tel. 0033 / 344 64 10 00 Fax. 0033 / 34 64 00 68 E-mail: fr.roehm@roehm.biz www.rohm.fr osnia-herzegovina: Kruhek d.o.o., Veprinacka 16, 10000 Zagreb (Kroatien) Tel. 00 38 / 513 695 138 Fax 00 38 / 513 639 530 E-mail: kruhek@zg.t-com.hr anada: (lamping technology - manual -) Sowa Tool & Machine O. LTD 500 Manitou drive N2G 46 Kitchener, Ontario Tel. 001 / 519 / 748 / 57 50 Fax 001 / 519 / 748 / 93 04 E-mail: sales@sowatool.com (lamping technology - power operated -) ROHM Products of merica 5155 Sugarloaf Parkway, Suite K Lawrenceville, G 30043 Tel. 001 / 770 / 963 / 8440 Fax 001 / 770 / 963 / 8407 E-mail: rohmusa@roehm.biz www.us.roehm.biz hile: Robert Kralemann, SERVIOMP Ltda. v. Departamental 1595 La Florida - Santiago Tel. 00 56 / 2 / 8 89 47 00 E-mail: rkralemann@gmail.com olumbia: Imocom S.. partado ereo 12287, ogota D. E. 6 Tel. 00 57-1 / 2 62 38 00 Fax 00 57-1 / 2 62 49 82 E-mail: imocom@imocom.com.co osta Rica: Servicios entroamericanos, S.. 625 Mts. Este del Parque de Tibás, frente a utos La FLORID, SN JOSÈ, OST RI P.O. ox : 4711-1000 SN JOSE, OST RI Tel. 00 506 / 2 40 11 11 Fax 00 506 /2 40 22 22 E-mail: sercensa@sercensa.com roatia: Kruhek d.o.o., Veprinacka 16 10000 Zagreb (roatia) Tel. 00 385 - / 0 / 1-36 95-138 Fax 00 385 - / 0 /1-36 39-530 GSM: 00 385 - / 0 / 98-382 - 003 E-mail: kruhek@zg.t-com.hr www.kruhek.hr zech Republic: Jan Vyslouzil Jiráskova 551 76824 Hulin Tel. 00 420 / 5 73 35 18 00 Fax 00 420 / 5 73 35 29 00 E-mail: janvyslouzil@iol.cz Ecuador: Maquinarias Henriques.. asilla 4361, Via a Daule KM.6 1/2 Guayaquil / Ecuador Tel. 00 593-4 / 2 25 43 00 Fax 00 593-4 / 2 25 43 00 181 E-mail: info@maquinarias-henriques.com Finland: Oy Interfii Ltd, Teollisuuskatu 35-39 LH4 20520 Turku Y-tunnus 2374026-3 Tel. 00 358 / 2 01 47 45 00 Fax. 00 358 / 2 01 47 45 01 Email: info@interfii.com (lamping technology - manual -) Teräskonttori Oy, Muuntotie 3, 1510 Vantaa Tel. 00 358 / 9 61 54 71 Fax 00 358 / 9 67 49 54 E-mail: info@teraskonttori.fi Greece: Stefanos Papadopoulos, Kifisiasstr. 15, 54655 Thessaloniki Tel. 00 30 / 23 10 48 87 58 Fax 00 30 / 23 10 48 87 53 E-mail: ST-papas@otenet.gr Hungary: Fairtool GmbH Koebanyai ut. 47/ H-1101 udapest Tel. 00 361 / 8 14 46 21 Fax 00 361 / 2 61 95 61 E-mail: jozsef.alker@fairtool.hu Indonesia: GP System Singapur PTE LTD No. 51, ukit atok rescent, #04-04/05 Unity entre Singapore 658077 Tel. 00 65 / 68 61-26 63, Fax: 35 00 E-mail: enquiry@gpsystem.com

gents worldwide Iran: Sakht bzar Pars o. (SP) No. 19/4 Saeb Tabrizi St., North bbas Shirazi ve, Molla Sadra ve., Tehran post code 19917 Tel. 00 98 / 21 / 88 03 18 88 Fax 00 98 / 21 / 88 03 77 33 E-mail: sales@sap-iran.com Ireland: ROHM (Great ritain) LTD. Unit 12 the ashway centre Elm cresent Kingston-upon-Thames Surrey KT 2 6 HH Tel. 0044-20 85 49 66 47 Fax. 0044-20 85 41 17 83 rohmgb@roehm.biz www.uk.roehm.biz Israel: ETMOS Tool Distributing o. Ltd. Industrial Zone, P.O. ox 1786, Holon 58117 Tel. 00 972-3 / 55 81 933 Fax 00 972-3 / 55 81 934 E-mail: etmos@etmos.co.il Japan: Takeda Trade o., Ltd. Tokyo office 113-0033, 3-5-2 Hongo unkyo-ku Tokyo / Japan Tel. 00 81/33815 6501 Fax 00 81/33816 4522 E-mail: hata@takeda-trade.co.jp Luxembourg: RÖHM S..R.L., 325 rue Paul Langevin 60740 St. Maximin Tel. 00 33 / 3 44 64 10 00 Fax 00 33 / 3 44 64 00 68 E-mail: fr.roehm@roehm.biz Malaysia: GP System Singapur PTE LTD No. 51, ukit atok rescent, #04-04/05 Unity entre Singapore 658077 Tel. 00 65 68 61-26 63, Fax: 35 00 E-mail: enquiry@gpsystem.com Marocco: Somadu 20-22, d. bdellah en Yacine, asablanca 20300 Tel. 00 21 222/30 05 90, Fax 45 06 10 E-mail: alaoui.my.youssef@somadu.com Macedonia: G.T.M.o. d.o.o. Export - Import utoput g - Zg br. 22 11080 eograd Srbija i rna Gora Tel. 00 381 / 1 13 14 90 24 Fax 00 381 / 1 13 14 90 21 E-mail: vladimir.rackovic@gtmco.rs Mexico: Sales Power de Mexico S.. DE.V. alle Jalpan No. 701 76030.P. QUERETRO, QRO.-OL.EST Tel. 00 52-442 / 2 14 55 43 Fax 00 52-442 / 2 24 01 12 E-mail:salesfob@salespower-tools.com Netherlands: (lamping technology - manual -) oorwerk.v., Flevolaan 52, Industrieterrian Noord 1382 JZ Weesp Tel. 00 31 / 294 / 43 20 50 Fax 00 31 / 294 / 43 21 52 E-mail: info@boorwerk.nl (lamping technology - power operated -) Friedhelm Schneider Tel. 0049 / 27 62 / 49 07 28 Fax 0049 / 27 62 / 49 07 29 E-mail: friedhelm.schneider@roehm.biz Norway: Ing. Yngve Ege /S Ryenstubben 5 0679 Oslo 11 Tel. 00 47 / 23 24 10 00 Fax 00 47 / 23 24 10 01 E-mail: ege@ege.no Poland: RÖHM GmbH Heinrich-Röhm-Straße 50 89567 Sontheim/renz (Germany) Tel 0049 73 25 16-0 Fax 0049 73 25 16-512 info@roehm.biz Portugal: RÖHM Iberica S.. /Rejas, No. 9 Nave 11 D 28022 Madrid Tel. 0034 / 91 / 3 13 57 90 Fax 0034 / 91 / 3 13 57 93 rohmiberica@roehm.biz www.rohm-iberica.es Russia: RÖHM GmbH Heinrich-Röhm-Straße 50 89567 Sontheim/renz (Germany) Tel 0049 73 25 16-0 Fax 0049 73 25 16-512 info@roehm.biz OOO T.W.L -Group Kosmonavta Volkova 5, stroenie 1, 127299 Moscow, Russia Tel. 007 / 495 / 5 04 72 39 007 / 903 / 1 03 29 02 Fax 007 / 495 / 6 18 42 68 E-mail: sales@twl-group.ru Saudi-rabia, VE, ahrain, Kuwait, Yemen, Libya, Egypt: Dirk Jaegemann Trade agency GmbH & o. KG Julius-amberger-Str. 1 28279 remen Tel. 04 21 / 8 39 21 30 Fax 04 21 / 8 39 89 21 E-mail: info@djta.de Sweden: Techpoint Systemteknik Nyponvaegen 4 19144 Sollentuna Tel. 00 46 / 86 23 13 30 Fax 00 46 / 86 23 13 45 E-mail: info@techpoint.se Serbia-Montenegro: G.T.M.o. d.o.o. Export - Import utoput g - Zg br. 22 11080 eograd Srbija i rna Gora Tel. 00 381 / 1 13 14 90 24 Fax 00 381 / 1 13 14 90 21 E-mail: vladimir.rackovic@gtmco.rs Singapore: GP System Singapur PTE LTD No. 51, ukit atok rescent, #04-04/05 Unity entre Singapore 658077 Tel. 00 65 / 68 61-26 63, Fax 00 65 / 68 61-35 00 E-mail: enquiry@gpsystem.com Slovenia: Kruhek d.o.o., Veprinacka 16 10000 Zagreb (Kroatien) Tel. 00 385 / 13 69 51 38 Fax 00 385 / 13 63 95 30 E-mail: kruhek@zg.t-com.hr Slovakia: MS s. r. o. Heckova 31 SK - 97201 ojnice Tel. 00 421 / 4 65 40 20 50 Fax 00 421 / 4 65 40 20 48 E-mail: michalovic@mcs.sk South frica: Kingstone Tools & ccessories P.O. ox 75746 2047 Gardenview Tel. 00 27 / 11 / 6 22 16 68 / 9 Fax 00 27 / 6 15 42 10 E-mail: rohmtools@mweb.co.za South-Korea: heong Do Trading o., Ltd. RM-6-103, 604-1 Kuro-Dong, Kuro-Ku, Seoul Tel. 00 822 / 6 78 41 55 Fax 00 822 / 67 25 48 3 E-mail: DMT@chollian.net Taiwan: V.T.M. ompany Ltd. No. 13-1 11th Road, Taichung Industrial Park Taichung, TIWN Tel. 00 886 / 4 / 23 59 27 59 Fax 00 886 / 4 / 23 50 74 27 Email: luck@vtm.com.tw Email: lily@vtm.com.tw Thailand: GP System Singapur PTE LTD No. 51, ukit atok rescent, #04-04/05 Unity entre Singapore 658077 Tel. 00 65 / 68 61 / 26 63 Fax 00 65 / 68 61 / 35 00 E-mail: enquiry@gpsystem.com Turkey : Sintek Mühendislik Makina San. Ve Tic. Ltd. Sti. Tarabya Mahallesi Yumak Sok. No: 3/1 34457 SRIYER ISTNUL Tel. 00 90 / 212 / 2 99 61 84 Fax 00 90 / 212 / 2 99 56 75 E-Mail: sinan.onurlu@sintekmuhendislik.com Ukraine: T.W.L.-JUG-Service 41, Gradonochalnitzkaya str. 1 65005 Odessa, Ukraine Tel. 00380 / 48 / 79 5 85 64 Fax 00380 / 48 / 7 94 94 68 E-mail: jugtech@twlweb.biz Venezuela: Hartung Hnos. Sucr..., partado 2480 aracas 1010- / Venezuela Tel. 00 58 / 212 / 54 20 820 Fax 00 58 / 212 / 54 19 449 E-mail: claus@hartung.com.ve Maquinaria Diekmann S.. V. Humboldt Las cacias RS 1040 / VENEZUEL Tel. 00 58 / 212 / 633 36 30 or Tel. 00 58 / 212 / 633 62 30 Fax 00 58 / 212 / 633 22 62 or Fax 00 58 / 212 / 632 80 13 E-Mail: purchase@diekmann.com.ve Vietnam: P DO Industrial Equipment o Ltd., 113/8 Tran Van Du Str. Ward 13, Tan inh Dist. Ho-hi-Minh-ity Tel. 0084 / 8 / 38 10 45 33 Fax. 0084 / 8 / 38 10 84 27 E-Mail: capdo01@capdo.com.vn

General conditions of sale and delivery 1 Quotation, Formation of ontract and ontent of ontract 1. The present General Terms of Sale and Delivery apply exclusively. We do not recognise any terms and conditions that are contradictory or different from our own, unless we have explicitly given our written agreement to do so. Our Terms of Sale and Delivery will also apply if we effect delivery to the Purchaser without any reservation in full awareness of the contradictory or different nature of the terms of the Purchaser, as compared to our own Terms. 2. Our quotations are always subject to change without notice unless they have been explicitly described as binding. The contract will only materialise upon our written confirmation and in line with the content thereof and by way of performance/delivery on our part. If delivery/service is immediately provided without any confirmation, the invoice will also be deemed to be the order confirmation. 3. Our General Terms of Sale and Delivery will only apply to a business entity as defined in Section 14 G [German ivil ode]. 4. osts for the compilation of drawings for specific constructions will be borne by the Orderer if, for reasons for which we are not responsible, the quotation does not lead to an order placement. 5. ll particulars regarding weights, dimensions, services and technical data that feature in our printed matter, catalogues, price lists or in other contract documents are only approximate, unless they have been explicitly described as binding. 6. We retain the right to amend the construction and form of the subject of contract, providing this does not involve unreasonable alterations for the Orderer. 7. The documentation comprises an assembly layout, piece list with details of the wearing and spare parts, as well as operational and maintenance instructions; this is always in the German language. Documentation is only in paper form or in digital form. For digital forms, the texts are provided in the formats.txt,.rtf or.do; drawings and piece lists are in the.tif format (grid format). ny documentation in excess thereof will be billed and is subject to particular arrangement. 8. For testing, when specific temperatures, times and other measurements or control values are to apply, the appropriate measurement methods must be specified prior to delivery and acknowledged by both Parties. Unless such values are so defined, our own measurement methods will apply. 9. Samples will only be delivered subject to a fee. 10. ssurances given, ancillary agreements and changes to the contract will require the written form to be operative. It will not be possible to waive this requirement. 11. n order placement will be deemed irrevocable unless the Deliverer has agreed in writing to cancel it. 12. For export transactions, delivery will be subject to the conditions specified on the order confirmation; in addition, the respectively current version of the international trade definitions most commonly used in international sales contracts (incoterms 1953) will apply as devised by the International hamber of ommerce. 13. In addition to the General Terms of Delivery and Sale, compliance with our product information sheets, the technical data sheets as well as other product-specific publications will apply, each in their current version. 2 Prices 1. Failing specific written agreement, prices apply as in the Federal Republic of Germany, free house plus the value added tax required by law. For export transactions, the item to be delivered is deemed sold ex works, unless the contract stipulates otherwise about the type of sale. For single orders for a value of goods less than 100.00 net, a handling fee of 10.00 plus the value added tax required by law will be charged for domestic orders and 25,00 net for abroad orders. 2. Please note that we only despatch the consignment at the request of the customer. Irrespective of this, the rulings laid down in Section 5 will apply. 3. We bill the prices that were valid when the contract was drawn up, based on the cost factors applicable at the time. Should these cost factors (particularly material, wages, energy etc.) alter during the period between the drawing up of contract and the agreed delivery time, we will be entitled to amend prices accordingly. For export transactions, the Deliverer will be entitled to cancel that part of the order that has not yet been completed or to adjust prices appropriately if the currency in which the contract was drawn up has devalued. 4. With an ex works contract, the goods will be transported at the expense and risk of the Orderer. For all consignments, the respectively current version of the provisions of incoterms 1953 will apply to the insurance and bearing of risk. 5. For parts/products that are produced in line with Purchaser requirements, we will notify the Purchaser of our production quantity. The Purchaser undertakes to take receipt of the quantity thus confirmed. 6. Over-deliveries and short-deliveries are admissible up to 5%; for special tooling up to 10% is admissible, at least, however, 2 (two) pieces. The respective delivery will be billed. 3 Modalities of Payment 1. Failing specific arrangements, payment is due without deduction and without charges within 10 days of the date of invoice - even for delivery instalments. 2. We are not bound to accept cheques or bills. In the event cheques or bills are accepted subject to prior arrangement in individual circumstances, this will only be as conditional payment, taking due account of discount charges and collection fees that are to be paid immediately in cash by the ustomer. The ultimate credit entry of bills of exchange and cheques will be after their redemption. The acceptance of cheques or bills will be without prejudice for subsequent commitments to payment. We will not be liable for the punctual presentation, protest, notification and return of a bill in the event it is not honoured. 3. ny overshooting of the payment deadline will incur interest to the amount of the banks borrowing costs, at least, however 8% in excess of the respective basic interest rate of the European entral ank. 4. If a bill or a cheque is not honoured on time or if a deadline for payment is overreached, all receivables still outstanding, including those that are deferred and those for which bills or cheques have been given, will become due for immediate payment. 5. The Purchaser will only be entitled to offset if the counterclaims he asserts have been established by declaratory judgment, if they are undisputed or have been acknowledged by us. The Purchaser will be authorized to exercise a right of retention to the extent his counterclaim is derived from the same contractual relations. 6. For export transactions, payments will be paid subject to the modalities of payment contracted. 7. osts of payment transactions, particularly bank charges of foreign payment transfers to us, are in principle for debits of the client. 4 Delivery Period 1. The delivery period we specify begins to run providing all technical issues have been fully clarified. The delivery deadlines we give are in principle not binding and only constitute a probable delivery time. 2. The compliance with our commitment to deliver depends on the Purchaser having punctually and properly fulfilled his commitments, particularly his commitment to comply with the contracted terms of payment. The right to plea non-performance of contract will be retained. This right will also be derived from commitments that have not been satisfied in full from previous deliveries. 3. The period of delivery commences upon the despatch of the order confirmation, yet not before the Orderer has provided the documents, permits, clearance papers etc. to be procured and not before the agreed deposit has been received. 4. If a fixed delivery date has been arranged, the Deliverer will effect delivery on time. ompliance with the delivery period will be deemed given if the item to be delivered has left the works or the readiness for despatch has been notified before the expiry of said delivery period, subject to timely and accurate delivery from our own suppliers. If the Orderer amends parts of the consignment to be delivered, the delivery period will run anew upon confirmation of said amendment. 5. Force majeure, war, uprising, strike, lock-out or measures enforced by the authorities for whatever reason that impede delivery, as well as a lack of raw materials, means of transport and theft even with our own suppliers will release the Deliverer from his commitment to deliver within the specified period of time. The Orderer will be notified immediately of the occurrence of the hindrance and of the likely repercussions. 6. It is admissible to effect delivery prior to the expiry of the specified delivery period and to deliver in appropriate instalments. 7. ompliance with the delivery period depends on the fulfilment of all contractual duties of the Orderer. 8. In the event of delivery delays or of the impossibility of delivery, the provisions of Section 10 will apply. 5 Transfer of Risk and Taking Receipt 1. Risk will pass to the Orderer at the latest with the despatch of the consignment, even if delivery is to be in instalments or if we still have other services to provide, e.g. despatch costs or transport and delivery as well as installation. 2. t the request and at the expense of the Orderer, we will ensure insurance cover of the consignment to be delivered for theft, breakage and damages from transportation, fire and water and for other insurable risks. 3. If despatch is delayed for reasons for which the Orderer is responsible, the risk will pass to the Orderer as from the date of readiness for despatch; nevertheless, we undertake to ensure insurance cover at the request and expense of the Orderer as called for by the Orderer. 4. Even if the delivered items feature insignificant defects, the Orderer will take receipt thereof irrespective of the rights laid down in Section 8. 6 Default of cceptance, all-off Orders 1. If the Orderer fails to take receipt of the items contracted on time, we will be entitled to set the Orderer a subsequent period of grace after which we will be entitled to dispose of the items otherwise and supply the Orderer subject to a subsequently lengthened delivery period. Irrespective of this, we will be entitled to withdraw from the contract as defined in Section 326 G [German ivil ode] and to call for compensation for damages owing to non-performance. In the event we call for compensation for non-performance, we will be able to claim compensation of 25% of the agreed price plus value added tax without having to provide evidence. We retain the right to assert actual damages of a greater dimension. 2. Orders, which we confirm for call-off must be accepted within one year of the date of order placement at the latest - unless otherwise arranged. The same will apply to fixed reservations or to permanent call-off statuses. Section 6.1 will apply accordingly in the event the goods are not called off. 7 Retention of Title 1. The items for delivery (the goods subject to the retention of title) will remain our property until all claims to which we are entitled from the Purchaser from the business relations have been satisfied in full. Where the value of all security interests to which we are entitled against the Purchaser exceeds all secured claims by more than 10%, we will release some of the security interests as appropriate at the request of the Purchaser. 2. During the period in which title to the goods is retained, the Purchaser is not allowed to pledge or assign the goods as security and is only permitted to resell to resellers in normal business transactions and only providing the reseller receives payment from its own customer or subjects the customer s ownership of the item to the full satisfaction of the customer s commitments to payment. 3. In the event of attachment, seizure or any other disposition or third-party intervention in respect of the goods, the Purchaser will notify us immediately so that we can file action subject to Section 771 ZPO [German ode of ivil Procedure]. If the third party is not able to reimburse us for the court and out-of-court costs of legal action pursuant to Section 771 ZPO, the Purchaser will be liable for the loss we thus incur. 4. The Purchaser undertakes to treat the item purchased with care. In particular, the Purchaser undertakes at his own expense to ensure it is adequately insured at reinstatement value against damages from fire, water and theft. Should maintenance and inspection work be required, the Purchaser will have this carried out in good time at his own expense. 5. In the event of breaches of duty on the part of the Purchaser, particularly with default in payment, we will be entitled to cancel the contract and to take back the goods; the Purchaser undertakes to surrender the goods. If we take back the goods and/or assert the retention of title, this does not mean we are cancelling the contract, unless we have explicitly declared as much.

General conditions of sale and delivery 6. If the Purchaser has resold the item purchased in regular business transactions, the Purchaser herewith now assigns to us all claims to payment in the amount of the final invoice amount (including value added tax), such as due to the Purchaser from the resale to his customer or a third party, irrespective of whether the item purchased has been resold without or after further reworking. The Purchaser remains authorized to collect this payment, even after assignment. Our own authority to collect payment ourselves will not be affected hereby. However we undertake not to collect payment providing the Purchaser satisfies his own commitments to payment from the proceeds collected, does not default in payment and in particular providing the initiation of insolvency proceedings is not petitioned or payments cease to be made. Should this, however, be the case, we will be able to demand that the Purchaser provides us with details of the assigned payments and their debtors as well as all information necessary to collect payment, that he hands over the relevant documentation to us and notifies the debtors (third parties) of the assignment. 7. The processing or reworking of the item purchased by the Purchaser will always be carried out on our behalf. If the item purchased is processed with other items not belonging to us, we will acquire co-ownership to the new item to the value of the item purchased (final invoice amount including value added tax) in relation to the other processed items at the time of reworking. The same will apply to the thus newly created items as for the items delivered subject to retention of title. 8. If the item purchased is processed with other items not belonging to us, we will acquire co-ownership to the new item to the value of the item purchased (final invoice amount including value added tax) in relation to the other processed items at the time of reworking. If the intermixing is such that the Purchaser s item is to be deemed the main item, it is herewith agreed that the Purchaser will transfer co-ownership to us proportionately. The Purchaser will keep the property in which we hold exclusive ownership or co-ownership on our behalf. 8 Quality Defects We are liable for defects in quality as follows: 1. ll parts or services will be remedied, at our discretion, free of charge or redelivered or provided again that are found to feature a quality defect during the statutory period of limitation - irrespective of service life - providing the origin thereof already existed at the time of the passing of risk. 2. laims to quality defects will become statute-barred in 12 (twelve) months. The period of time commences with the passing of risk (Section 6). 3. The Purchaser will immediately file written objection to the quality defect with us. 4. In the event objections are filed, the Purchaser will be permitted to refrain from payment to an extent appropriate to the quality defects featured. The Purchaser will only be able to refrain from payment if an objection is asserted, the justification of which cannot be doubted. If the objection has been asserted unjustifiably, we will be entitled to call for the reimbursement of the expenses incurred by us. 5. Initially we will always be granted an opportunity to remedy a defect within an appropriate period of grace. 6. Should the remedy fail, the Purchaser notwithstanding any claims to damages will be able to cancel the contract or reduce remuneration. The Purchaser will only be able to call for the reimbursement of fruitless expenditure if the defect in question is attributable to our own wilful intent or gross carelessness for which we are responsible. 7. laims to defects in quality are not given if the divergence from the agreed nature of the product is only minimal, if usability is only insignificantly impaired, in cases of natural depreciation or damages generated after passing of the risk as a result of faulty or negligent treatment, excessive exposure, unsuitable operating media or because of specific outer impact that was not to be expected given the contract, as well as in cases of non-reproducible software errors. If amendments or repair work is carried out improperly by the Purchaser or by third parties, there will be no claims to the defects resulting or the effects thereof. The same will apply to a lack of compliance with our instructions on handling and other instructions and if maintenance is not carried out properly 8. laims of the Purchaser to a refund of the expenses incurred for the purpose of remedy, such as costs of transport, travel, labour and materials will be ruled out, when such expenses increase because the item delivered was brought to a destination other than the Purchaser s branch premises, unless said relocation is in accordance with the intended use of the item. 9. Legal claims to recourse against us on the part of the Purchaser will only be given if the Purchaser has entered into no agreement with his customer in excess of those claims to defects regulated by the law. 10. laims to compensation for damages will be governed by Section 9. ny fartherreaching claims to quality defects or others than those governed in this Section or in Section 9 will be ruled out. 9 Industrial Property Rights and opyrights, Defects of Title Unless otherwise agreed, we undertake to only effect delivery free from proprietary rights and third party copyrights (referred to in the following as industrial property rights) in the country of the delivery destination. In the event a third party files justified claims against the Purchaser for a breach of industrial property rights derived from deliveries we effected that are being used as contracted, we will be liable towards the Purchaser for the period of time specified in Section 8.2 as follows: 1. t our discretion and at our own expense, we will either procure a licence for the deliveries in question, alter them so that there is no breach of industrial property rights or we will provide a substitute. Should this not prove possible at appropriate conditions, the Purchaser will be entitled to the rights of cancellation or reduction as laid down by the law. The Purchaser will only be able to call for the reimbursement of fruitless expenditure if we are to blame for wilful intent or gross negligence. Our commitment to provide compensation for damages is governed by Section 10. 2. The above commitments will only be given if the Purchaser has given us immediate, written notification of the claims asserted by the third party, does not recognise any breach of rights and if we retain the right to initiate defence measures and negotiate a settlement. If the Purchaser ceases to use the item delivered in order to reduce damages or for other good cause, the Purchaser undertakes to inform the third party that this discontinuation of use does not embody any acknowledgement of a breach of industrial property rights. 3. laims of the Purchaser will be ruled out if the Purchaser is responsible for the breach of industrial property rights. 4. ny claims of the Purchaser will also be ruled out if the breach of industrial property rights was derived from specific specifications of the Purchaser, from an application that we could not foresee or from the item delivered being altered by the Purchaser or used in combination with products that we have not delivered. 5. In the case of breaches of industrial property rights, the provisions of Sections 8.4, 8.5 and 8.9 will apply appropriately to the claims of the Purchaser governed by Section 13. 6. ny farther-reaching claims to defects of title of the Purchaser or claims other than those governed by the present Section 9 against us or our vicarious agents will be ruled out. 10 Overall Liability 1. laims of the Purchaser to compensation for damages irrespective of the legal nature of the claim asserted will be ruled out. 2. The exceptions are: a) Damages due to the violation of major contractual duties (cardinal duties). However, in the case of simple negligence, liability for damages will be restricted to foreseeable, typically occurring damages. b) Damages derived from injury to life and limb if we are responsibility for the breach of duty. c) Damages attributable to wilfully intentional or negligent violations, said breach of duty on the part of our legal representatives or vicarious agents being of equal status to any breaches of duty on our part. d) laim to damages for impossibility or inability. 3. ny alteration of the onus of proof to the detriment of the Purchaser does not relate to the above provisions. 4. Liability subject to the Product Liability ct remains unaffected hereby. 5. Where liability for compensation is ruled out or restricted in our respect, this will also apply to the personal liability for damages of our employees, our trade representatives and our vicarious agents. 11 Duties to Involvement of the Purchaser 1. The involvement of the Purchaser that has been agreed to explicitly or implicitly in the contract will be subject to no specific remuneration, unless otherwise explicitly agreed. 2. The Purchaser undertakes to inform us in good time of all facts, which indicate that stocks and products we have made available in the light of our notified production capacities cannot be used or not be used in full. Where stock remains, in the case of a premature change to his planning, the Purchaser will take over the remainder and any costs of destruction that might be incurred. This will also apply to products for which we have had to place orders for minimum quantities from our own suppliers, providing we previously advised the customer thereof. 3. The Purchaser guarantees that the products delivered by him for reworking are suitable for the purpose. We do not undertake to check the products delivered by the Purchaser for their quality and aptitude for reworking. In ongoing business relations and whenever an item for reworking has been initially checked, tested and released, the Purchaser undertakes to inform us in writing of each and every product amendment without actually being requested to do so. When items are being reworked, after every change in production conditions on his premises, in particularly when substituting tooling, machinery or introducing new production processes, the Purchaser also undertakes to examine the item to be processed by us for any divergence and alteration and to notify us in writing of any such divergence and alteration. 4. Instructions from our Purchaser, the selection of material or other specifications laid down by the Purchaser do not oblige us to check them for accuracy. 5. The Purchaser will hence check all instructions it issues as well as the quality of the material specified to us or made available to us for compliance with the law and technical regulations. 6. Should the Purchaser default in terms of its duties to provide or to become involved, we will be entitled to the rights stipulated by law. 7. In any case, goods may only be returned subject to the explicit consent of the Deliverer. Their return will be free-house and details of the order number and delivery date will be given as well as the original delivery packaging. The goods will be in their original condition, i.e. in an undamaged state. For the handling of a return, we charge 20% of the value of the goods, at least, however, 50.00 plus value added tax. In individual circumstances, the Deliverer retains the right to charge the Orderer a higher sum based on evidence. 12 Place of Performance and Jurisdiction/ Other 1. The place of performance and payment will be the registered office of our company in Sontheim/renz. 2. Exclusively the laws of the Federal Republic of Germany will govern the present contractual relations. The application of the United Nations onvention dated 11.04.80 on ontracts for the International Sale of Goods (ISG Wiener Kaufrecht ) is ruled out. 3. For all disputes derived from contractual relations, if the Orderer is a registered businessperson, a legal entity under public law or a separate estate under public law, legal action will be filed with the court of law with jurisdiction for our registered office. We will also be entitled to file legal action at the location of the registered seat of the Orderer. 4. Should any one condition of our General Terms of Sale and Delivery be void for any reason whatsoever, the validity of the remaining provisions will not be affected hereby. 5. We will save your data in accordance with Section 23 DSG [Federal Data Protection ct]. RÖHM GmbH D 89565 Sontheim/renz Revised: September 2013

,,,, RÖHM we re here to serve you.

We offer real partnership. We see this reflected in collaborative partnerships both with specialist dealers as well as directly with consumers. We offer sound advice, provide comprehensive support and do our utmost for you, so that you get exactly the right solution for meeting your targets safely and economically. nd if there isn t a solution available yet, then we ll design it.

TÄGLIH KTULISIERTE LGERLISTE UNTER www.hesse-maschinen.com Vertrauen Sie auf über 65 Jahre Erfahrung! Die Firma HESSE+O wurde 1947 als Hersteller von lechbearbeitungsmaschinen gegründet. Seit 1980 sind wir auf den Handel mit neuen sowie gebrauchten lechbearbeitungs- und Werkzeugmaschinen spezialisiert. Wir haben ständig etwa 300 Maschinen in unserer 2.000 m² großen usstellungshalle, die nur 20 Minuten vom internationalen Flughafen Wien entfernt ist. Trust in more than 65 years of experience! HESSE+O was established in 1947 as a manufacturer of sheet metal working machines. Since 1980 we are specialized in dealing with new and second hand sheet metal processing machines and machine tools. We always have approximately 300 machines available in our 2.000 m² showroom, which is located only 20 minutes from the Vienna International irport, waiting for your inspection. www.hesse-maschinen.com Ihr Partner seit 1947 HESSE+O Maschinenfabrik GmbH Industriezentrum NÖ-Süd Straße 4 - Objekt 8-2351 Wiener Neudorf USTRI Technische Änderungen, Irrtum und Druckfehler vorbehalten. Gültig bis auf Widerruf. Tel.: +43/2236/638 70-0 Fax: +43/2236/636 62 office@hesse-maschinen.com www.hesse-maschinen.com www.blechpower.com