FAMILIA DE COMPRESORES: Fabricante LMF 1. PRESENTACIÓN DE LMF Nuestro representado LMF es el fabricante de compresores líder en Austria y unos de los más prestigiosos a nivel mundial en compresores de pistón, alternativos, rotativos y de boil off, para aire, gas natural y otros gases técnicos e industriales en un rango de potencia de 20 a 3000kW (30-4080 hp) y para presiones de hasta 500 bar (7250 psi). LMF exporta más del 90% de su producción en todo el mundo y para muchas aplicaciones, principlamente en la industria productora (y distribuidora) del petróleo y el gas, la industria química, petroquímica, del plástico, y muchas otras. A continuación presentamos una tabla resumen de la gama de compresores fabricados por nuestro representado LMF Leobersdorfer Maschinenfabrik AG: Para más información, puede enviarnos sus consultas o peticiones de oferta por correo electrónico (ipic@ipic-gsp.com) o por fax (965-206412). Asimismo, puede visitar el sitio web del fabricante: www.lmf.at.
2. LÍNEAS DE PRODUCCIÓN DE LMF 2.1. AIRCOOLED V-COMPRESSORS 2.2. AIRCOOLED HIGH SPEED BOXER 2.3. COMPOUND COMPRESSOR SYSTEMS 2.4. WATERCOOLED V-COMPRESSORS 2.5. PROCESS GAS COMPRESSORS API 618 2.1. AIRCOOLED V-COMPRESSORS LMF s Heavy Duty aircooled compressors for air and other gases are designed as two to five-stage units (in special cases six-stage units), with two to six single-acting, conventional, deep finned cylinders with capacities up to 5000 ltrs/min (180 cfm) and for pressures up to 450 bar (6525 psi). LMF compressor units can be fitted with either a manual control system or one that is fully automatic, depending on the operating conditions in each case. Thanks to their sturdy design, LMF compressors are suitable for both intermittent and continuous operation. They can also be used as booster units with elevated inlet pressure rates and final pressure rates up to 450 bar (6525 psi). V16-3410 L 5 four stages, single-acting, aircooled cylinders delivery 1,4 m³/min (50 cfm), working pressure 50 bar (725 psi), electric motor 18,5 kw (25 hp)
V17-5518 L 35 five stages, single-acting, aircooled cylinders delivery 2580 ltrs/min (91 cfm), working pressure 350 bar (5075 psi), driven by 75 kw (100 hp) electric motor V7d - 1216 L 0.8 one stage, double-acting, aircooled cylinders delivery 342 Nm³/h (215 scfm), working pressure 8 bar (120 psi), driven by 37 kw (50 hp) electric motor 2.2. AIRCOOLED HIGH SPEED BOXER LMF s aircooled high speed boxer compressors for air, natural gas, technical and industrial gases are designed for speeds up to 1800 rpm and a maximum power consumption of 100-1000 kw (136-1360 hp). The cylinders used are double acting or step cylinders with hardened inner surface. These compressor units provide smooth running characteristics and require low space due to their compact design with balanced-opposed arrangement.
BT4 Aircooled High Speed Boxer Bare compressor BT4 4429 L/W 20 four cylinders, four stages, single-acting, aircooled cylinders, watercooled coolers delivery 8,5 m³/min (300 cfm), working pressure up to 150 bar (2175 psi) BS 102 / BS 302 Aircooled High Speed Boxer BS 204 / BS 604 Aircooled High Speed Boxer 2.3. COMPOUND COMPRESSOR SYSTEMS LMF compound compressor units are intended for use in all situations where little space is available, where weight must be kept to a minimum, but where high output capacities and high final pressures are required. This type of compressor is a combination of a screw compressor and a piston compressor, with a common prime mover diesel or electric - situated between them.
LMF compound compressors are available as stationary units for on/off-shore operation, or as mobile units mounted on trucks or trailers. By covering a power range of up to 1150 kw (1600 hp), the compressor units provide final pressures of up to 400 bar (5800 psi) and output capacities from 24 m³/min (800 cfm) to 70 m³/min (2480 cfm). All LMF compressors bear the fruit of LMF s experience in having built more than 400 compound compressor units since 1980, for clients all over the world. BT Compound Compressor Systems Portable compound compressor unit LMF 20/138-150 Ds including HP air receivers, HP air control valve, seawater supply pump and special manifold with 32 HP outlets VC/VCS Compound Compressor Systems LMF 57/138-207 E with sea-/freshwater heat exchanger delivery 57 m³/min (2000 cfm), working pressure 138-207 bar (2000-3000 psi), driven by 1100 kw (1490 hp) electric motor (690 V, 60 cps, watercooled)
Nitrogen Compound Compressor Systems Truck-mounted nitrogen unit LMF 47-20/250 D with HP compressor VC-3221 W 25 and nitrogen (air)/air heat exchanger, driven by 12 cyl. 900 kw (1220 hp) diesel engine, containerized for ambient temperatures +35/-50 C 2.4. WATERCOOLED V-COMPRESSORS LMF s watercooled compressors for air and other gases are designed as three to fivestage units (in special cases one, two or six-stage units) with capacities up to 25 m³/min (880 cfm) and for pressures up to 450 bar (6525 psi). The two to six cylinders can either be single-acting trunk piston cylinders, or step cylinders and double-acting cylinders with crossheads. In each stage, both the cylinder and the compressed gas are watercooled, either by means of an "open" system (continuous flow system) or a "closed circuit" (coolant circulating through heat exchanger). VC Watercooled V Compressors Compressor block VC two watercooled cylinders, double-acting, up to four stages (mainly as booster with two to three stages)
VCS/VCL Watercooled V Compressors Compressor block VCS /VCL four watercooled cylinders, double-acting, up to five stages
2.6. PROCESS GAS COMPRESSORS API 618 LMF process gas compressors meet the API 618 requirements and are used for gases and gas compositions in chemical and petrochemical processes as well as for boil-off gases, and in low-temperature applications. Specialized in package units - ready for operation LMF offers compressors with up to six compression stages, inlet capacities from less than 100 to 22000 m³/h (13000 cfm) and final pressure rates up to 250 bar (3600 psi) with oil-free compression as well as 450 bar (6525 psi) with oil lubricated cylinders. T 91-93 T 93 319 N 5.1 three stages, non-lubricated, V-belt driven, for compressing nitrogen, capacity 800 Nm³/h (490 scfm), working pressure 51 bar (740 psi) T 121-123 T 122 224 N 3 two stages, non-lubricated, direct driven, for compressing hydrogen mixture, capacity 3390 Nm³/h (2070 scfm), working pressure 30 bar (440 psi)
T 151-153 T 152 121 N 2.9 one stage, non-lubricated, direct driven, for compressing ethylene, capacity 11190 Nm³/h (6820 scfm), working pressure 30 bar (440 psi) T 181-183 T 183 357 N 1.1 three stages, non-lubricated, direct driven, for compressing carbon monoxide, capacity 3325 Nm³/h (2030 scfm), working pressure 11 bar (160 psi) B 92-94 B 91 108 S 6.1 one stage, min-lubricated, direct driven, for compressing hydrogen (recycle sour service), capacity 470 Nm³/h (290 scfm), working pressure 61 bar (870 psi)
B 122-124 B 122 314 N 6.6 three stages, non-lubricated, V-belt, for compressing carbon dioxide, capacity 3490 Nm³/h (2160 scfm), working pressure 66 bar (960 psi) B 152-154 B 154 255 S 2.1 two stages, lubricated, direct driven, for compressing hydrocarbon gas mixture, capacity 9780 Nm³/h (5965 scfm), working pressure 21 bar (308 psi) B 182-184 B 182 212 N 16.3 two stages, non-lubricated, direct driven, for compressing hydrogen, capacity 3740 Nm³/h (2320 scfm), working pressure 163 bar (2320 psi)
B 252-256 B 252 124 S 8.7 one stage, min- lubricated, direct driven, for compressing hydrogen, capacity 44680 Nm³/h (27760 scfm), working pressure 87 bar (1260 psi) V 92-94 / V 122-124 V 122 316 N 6.6 three stages, non-lubricated, V-belt driven, for compressing nitrogen, capacity 1655 Nm³/h (1020 scfm), working pressure 66 bar (960 psi)