Solar power training packages From basic to industrial concepts

Similar documents
Basic Renewable Energy Training System

A Electric Power / Controls ELECTRIC POWER TECHNOLOGY 0.2 kw

A Electric Power / Controls SMART GRID TECHNOLOGIES 0.2 kw

Power Electronics Training System

Small-Scale Wind Power Electricity Generation Training System

Solar/Wind Energy Training Systems LabVolt Series

Electromechanical Training System

Electric Power Technology Training Systems

Power Electronics Training System

Solar/Wind Energy Training Systems

RENEWABLE ENERGY TRAINER

Lead-Acid Batteries Training System

46120 Solar/Wind Energy Training Systems

Photovoltaic Solar Energy Modular Trainers

8036-A0 Motor Drives Training System (Stand-Alone)

Variable-Frequency Drive Training System

Solar inverter AX-series

TECHNICAL SPECIFICATIONS OF 2 KVA POWER CONDITIONING UNIT

Energy 142 NABCEP (North American Board of Certified Energy Practitioners) Entry Level Test Review. System Components

Principles of Doubly-Fed Induction Generators (DFIG)

400W / 600W / 1000W / 1500W DIY Wind Turbine

renewable energy and energy efficiency

Photovoltaics. MPI Hybrid Series

SOLAR/WIND ENERGY TRAINING SYSTEM MODEL 46120

Motor Drives Training System (Stand-Alone, 120 V Version) (8036-C0)

Photovoltaic Solar Energy Modular Trainers

Exercise 2-1. The Separately-Excited DC Motor N S EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Simplified equivalent circuit of a dc motor

Electrical Power Systems 2014/15

Distinctive Features: Bidirectional solar PCU Hybrid inverter (Solar/ Grid/BATT) Vector Modulated Inverter Control Multiple DSP control operation

Armature Reaction and Saturation Effect

Distinctive Features: Bidirectional solar PCU Hybrid inverter (Solar/ Grid/BATT) Vector Modulated Inverter Control Multiple DSP control operation

Exercise 7. Thyristor Three-Phase Rectifier/Inverter EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Thyristor three-phase rectifier/inverter

GV-4 Manual 4A / 50W IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. Solar Charge Controller with Maximum Power Point Tracking.

Electricity and New Energy. Wind Power Systems. Course Sample

Reference: Photovoltaic Systems, p References: Photovoltaic Systems, Chap. 7 National Electrical Code (NEC), Articles 110,

Solar off-grid Inverter. SP Junior Series. User Manual

User Manual. Wind and Solar Hybrid Charge Controller 1KW / 2KW 48VDC. HCON Series

Festo Didactic: LabVolt Series Training Systems A whole new range of possibilities

Steca Elektronik SOLARIX PLI

Wind Energy System.

SMPPT. Solar Charge Controller with Maximum Power Point Tracking. Installation & Operation Manual

K50. Technical Sheet

3400W Solar Battery Charger Maximum Power Point Tracker

X400. Technical Sheet

SMT. Installation and Operation Manual. Model:SMT WITH MPPT TECHNOLOGY

renewable energy and energy efficiency

CENTAURI ENERGY SERVER TECHNICAL DATA kw POWER

X600. Technical Sheet

Steca Elektronik INVERTER / CHARGER WITH MPPT: SOLARIX PLI

2.1.Steca Solsum. Solsum 8.0c. Solar Charge Controller. Solsum 5.0c. Solsum 6.6c. Solsum 10.10c. 8.8c

MERU Solar Off-Grid Inverters

Laboratory Infrastructure

Hydrogen Fuel Cell Training System

Unit 32 Three-Phase Alternators

Contents. Prefece. List of Acronyms «xxi. Chapter 1 History of Power Systems 1

Hydrogen Fuel Cell Training System ( )

New & Renewable Energy

Off-grid Power for Wireless Networks. Training materials for wireless trainers

Permanent Magnet DC Motor

Senior Design Project Proposal

Application. Battery. Public Grid GS HYBRID INVERTER

Autonomous Power Supply Uninterruptible Power Supply (UPS)

SMART 1000 / 2000 SERIES

Solar Energy Trainer. Experiments:

WIND ENERGY MODULAR TRAINER WITH CONNECTION TO MAINS DL WIND-A1G

Current Automation Catalogue

Schneider Electric Conext SW

SkyFire Energy Inc. Off Grid and Grid Tie Solar Energy. April 20, /04/2013. Alberta Energy Reserves Billion Barrels of Oil Equivalent

LOT Kwp Solar PV Power Solution with Battery Backup

1700W Solar Battery Charger Maximum Power Point Tracker

Solar Charging Station for Education and Research

3400W Solar Battery Charger Maximum Power Point Tracker

P H O T O V O LTA I C

3500W Solar Battery Charger Maximum Power Point Tracker

Components for your PV Solar Electric System

Wind Energy Unit EEE. Engineering and Technical Teaching Equipment PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION. Electronic console

Exercise 1-3. Manual Starters EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Direct-on-line (DOL) starters. Reversing starters

Solar Inverter 3kW-8kW Inverter (off-grid)

KIT SOLAR MONTE PERDIDO

Site Visit to Green Electric Energy Park at Curtin University, Perth, Western Australia. Institution of Engineers Sri Lanka Western Australia Chapter

Electricity and New Energy. Lead-Acid Batteries

3400W Solar Battery Charger Maximum Power Point Tracker

Technical standard for AC, DC and street light systems

K10. Technical Sheet

Designing Stand Alone Systems. Overview, components and function, Elements in Design

3400W Solar Battery Charger Maximum Power Point Tracker

Industrial Controls Training Systems

Phoenix Multi Inverter/Chargers

WINDY BOY. Grid Connection of Small Wind Turbine Systems

Technologies for ToT & Power Electronics Test Facility. under NaMPET-II CDAC, Thiruvananthapuram

Rover Series. Rover 20A 40A Maximum Power Point Tracking Solar Charge Controller

the National PhotoVoltaic protection note 5 I rated Introduction points of interest When to Fuse, When Not to Fuse

Conclusions. Fall 2010

Renewable Hybrid / Off-grid Solutions

Retrofit to Single phase / Three phase PV system Micro-grid, UPS, Peak shift, Pure off-grid retrofitting etc multi-working

12-Batteries and Inverters. ECEGR 452 Renewable Energy Systems

PV System Components. EE 495/695 Spring 2011

SOLAR INVERTER/CHARGER 1000VA/1500VA/2000VA. Appliances. PC TV Light Electricfan

3.6 Kwp Solar system Supply, Installation, Commissioning & Maintenance of Solar Systems to YEMAC office in HADDA street, Sana a city

Solar inverter From Wikipedia, the free encyclopedia

Transcription:

Solar power training packages From basic to industrial concepts Solar Power Production As solar power production becomes more and more affordable for residential applications, no wonder the number of installations worldwide is blooming. So comes the need to train qualified technicians in understanding and maintaining these systems. Our solar power learning solutions come in modular packages that will fit your training needs starting with the fundamentals of photovoltaic panels and how they work all the way to actual photovoltaic energy production systems operating in stand-alone or grid-tied operation. Features Flexible packages for specific training and budget needs A4 form factors Modular approach giving opportunity to combine these packages with other topics New and safer grounding methods between the modules Solar Panel Emulator for experiments requiring more power Two types of inverters: PWM and MPPT Top of the line data acquisition and control interface designed for learning purposes Computerized tools made for learning To guide students through their learning path, Festo Didactic provides state-of-the-art data acquistion tools for easy, safe and fast measurements in order to speed up the setup time but also reduce the downtime of using standard measuring instruments. The Data Acquisition and Control Interface comes also with an oscilloscope, a phasor analyser, a data table and a graph on specifically designed software optimized for learning purposes. Training Content The workbooks take the student starting with the basics and explaining the necessary theory in order to perform the different lab experiments planned. The first workbook focuses on the photovoltaic panels themselves, their construction and their operation under different conditions. The second workbook enables the students to experiment production scenarios either on a standalone mode (off-grid) or in grid-tied mode (parallel). Please refer to the page 187 for the specific topic coverage of each workbook.

Three different packages are available Solar Power Basic Package 596086 Learn the fundamental principles of solar power in a cost-effective package The most important components at a glance: 1 1x 12 V Lead-Acid Batteries* 595060 2 1x Solar Panel Test Bench 595057 1x Monocrystalline Silicon Solar Panel 595058 1x Solar Power (Instructor Guide) 603890 Also order Workbook: Solar Power *A 12 V DC battery charger is required for this module. The user can use his own with right 4 mm safety plugs or use the following equipment Required accessories for the basic package 2x Digital Multimeter 579782 Optional equipment for the basic package (to charge the 12 V Lead-Acid Batteries) 1x 4-Quadrant Power Supply and Dynamometer Controller... (including Manual and Computer-Based Control) 595028 Solar Power Advanced Package 596087 Train on the concepts of solar power production in stand-alone and also grid-tied scenarios The most important components at a glance: 1x DC 48 V Lamps 595055 1x AC 230 V Lamps 595056 2x 1 AC Energy Meter 594904 1x 48 V Lead-Acid Battery Pack 595059 1x DC 48 V PWM Charge Controller 595051 1x DC 48 V MPPT Charge Controller 595050 1x AC 230 V Power Supply 595930 1x AC 24 V Power Supply 772050 1x 1 AC 230 V Stand-Alone Inverter 595052 1x 1 AC 230 V Grid-Tied Inverter 595053 1x 4-Quadrant Power Supply and Dynamometer Controller... (including Manual and Computer-Based Control) 595028 1x Firmware Function (4Q Power Supply/Dynamometer) Solar Panel Emulator 581440 1x Data Acquisition and Control Interface (including computer-based... instrumentation for 2x current inputs and 2x voltage inputs) 595912 1x Photovoltaic Systems (Instructor Guide) 593987 Also order Workbook: Photovoltaic Systems 1 12 V Lead-Acid Batteries 1 2x VRLA (valve regulared lead acid) batteries mounted on a A4 module Nominal voltage: 12 V (each battery) Nominal capacity: 2.3 Ah (each battery) Maximum charge current: 0.92 A (both batteries) Maximum Discharge Current: 5 A (each battery) Fuse: 5 A (auto reset, each battery) Test point fuse: 0.1 A (auto reset) 2 Order no. 595060 2 Solar Panel Test Bench The Solar Panel Test Bench is a tabletop module where the solar panel mounts into so that it can be illuminated and experiments can be conducted. Input voltage: 230 V/50 Hz Nominal current: 1.5 A 392 x 250 x 370 mm Order no. 595057 Also order: Workbooks Required accessories for the advanced package 1x Communications Gateway* 595054 * Only one per lab is necessary Solar Power Complete Package 596088 Contains both basic and advanced package in one complete solution Required accessories for the complete package 2x Digital Multimeter 579782 1x Communications Gateway* 595054 * Only one per lab is necessary Optional accessories for the basic and complete packages (for outdoor experiments) Solar Power The exercises in the workbooks contain the theory and lab manipulations to cover the following exercises: The Diode The Solar Panel (Photovoltaic Panel) Effect of Temperature on Solar Panel Performance Storing Energy from Solar Panels into Batteries (optional) Effect of Shading on Solar Panel Operation Solar Panel Orientation Solar Panel Performance versus Insolation Campus licence 1x Tripod 583216 www.festo-didactic.com, en 596125 1x Pyranometer 579784 Student Manual, en 603887 A paper copy of the corresponding Instructor Guide is included if you order by package Instructor Guide, en 603890 Photovoltaic Systems The exercises in the workbooks contain the theory and lab manipulations to cover the following exercises: Stand-Alone PV Systems for DC Loads Use of an MPPT Charge Controller in Stand-Alone PV Systems Stand-Alone PV Systems for AC Loads Grid-Tied PV Systems Campus licence www.festo-didactic.com, en 596125 Student Manual, en 593985 Instructor Guide, en 593987

Accessories Solar power training packages 1 Monocrystaline Silicon Solar Panel The Monocrystaline Silicon Solar Panel are mounted on a common metal chassis that can be installed in the Solar Panel Test Bench, when performing exercises indoors, or on a tripod when performing exercises outdoors. PV Module: 2 monocrystalline silicon solar panels Open-circuit voltage (VOC): 9 V @ STC Short-Circuit Current (ISC): 100 ma @ STC Load potentiometer: 500Ω 2 W Diodes: 3 Thermometer: -50 C to +150 C 240 x 237 x 58 mm Net Weight 2.0 kg Order no. 595058 2 1 AC Energy Meter The 1 AC Energy Meter is an A4 module that includes a single-phase energy meter. AC network voltage: 230 V 50 Hz Current: 16 A Monitored Values: voltage, current, energy, power Order no. 594904 3 DC 48 V PWM Charge Controller 1 3 The DC 48 V PWM Charge Controller is an A4 module used to perform charge controlling experiments with batteries and DC energy sources like solar. Charge controller type: MPPT (maximum power point tracking) Battery Output: Max. current 7 A, absorption voltage 57.6 V, float voltage 55.2 V Recommended battery pack voltage: 48 V DC 2 4 Photovoltaic panel input: 7 A, 100 V (max.) Input protection: reverse polarity and overvoltage (100 V) Battery connection protection: Reverse polarity and overvoltage (64 V) 297 x 266 x 218 mm Order no. 595051 4 DC 48 V MPPT Charge Controller The DC 48 V MPPT Charge Controller is an A4 module that is used to control the charge of batteries with DC energy sources like solar panels. It uses the MPPT technology which adjust its input voltage and find the maximum power operating point from the solar array and transfer this power to the battery and load. Charge controller type: MPPT (maximum power point tracking) Battery Output: Max. current 7 A, absorption voltage 57.6 V, float voltage 55.2 V Recommended battery pack voltage: 48 V DC Photovoltaic panel input: 7 A, 100 V (max.) Input protection: reverse polarity and overvoltage (100 V) Battery connection protection: Reverse polarity and overvoltage (64 V) 297 x 266 x 218 mm Order no. 595050

1 AC 230 V Power Supply The AC 230 V Power Supply consists of a single-phase power supply which, connected to the AC line voltage, supplies the necessary power for single-phase experiments. This power supply is mounted in an A4 module. Input: 3 A/230 V/50 60 Hz Output: 3 A/230 V/50 60 Hz Circuit Breaker: 3 A Dimensions (H x W x D) Weight: 2.8 kg Order no. 595930 2 1 AC 230 V Grid-Tied Inverter The 1 AC 230 V Grid-Tied Inverter is used to return power from a DC power source such as batteries directly to the grid and it is mounted in an A4 module. Inverter type: Grid-Tied with MPPT Output power: 215 W Output voltage: 1 AC/230 V/50 Hz/ 0.94 A (max.) Input voltage: DC 48 V MPPT voltage range 27 39 V Input protection: Reverse polarity and overvoltage (42 V DC) AC output protection: Inverter built-in protections Order no. 595053 3 Communications Gateway 1 3 The Communications Gateway is an A4 module that is used to communicate and set grid-tied inverters over the AC line voltage directly. Input: 1 AC/230 V/50 Hz/0.05 A (fused) Communication with inverters through ac power line Order no. 595054 2 4 4 Pyranometer The Pyranometer is a high-quality instrument for measuring solar irradiance. Order no. 579784

Wind power training packages Learn the concepts of residential wind power production Wind power study in a classroom Just like solar power, wind power is getting more attention due to its ease of use and cost-effective installation. The small wind turbines represent a lot of decentralized production nodes that have to be taken into account in today s electrical network. Our wind power learning solutions come in a modular way which can also be mixed with other learning solutions. The packages start with an introduction to wind power using real wind turbine parts into a safe working environment along with our dynanometer that recreates realistic wind condition as well as the real power-torque curves. Once the introduction is done, student will experiment energy production to supply power to AC and DC loads. Features Flexible packages for specific training and budget needs A4 form factors Modular approach giving opportunity to combine these packages with other topics New and safer grounding methods between the modules Wind Turbine Emulator embedded in a flexible Dynamometer Real wind turbine parts in safe working environment Top of the line data acquisition and control interface designed for learning purposes Computerized tools made for learning To guide students through their learning path, Festo Didactic provides state-of-the-art data acquistion tools for easy, safe and fast measurements in order to speed up the setup time but also reduce the downtime of using standard measuring instruments. The Data Acquisition and Control Interface comes also with an oscilloscope, a phasor analyser, a data table and a graph on specifically designed software optimized for learning purposes. In the same vein, the Dynamometer provided connnects to your computer through USB using the same software in order to set it up quickly and easily to enhance the learning experience and recreates wind turbine conditions in the classroom environment. Training Content The workbooks take the student starting with the basics and explaining the necessary theory in order to perform the different lab experiments planned. The first workbook focuses on introducing wind power production to then charge batteries and power simple loads. The second workbook provides the student the knowledge to setup stand-alone applications to produce power and use it with DC loads or with AC loads in combination with an inverter. Please refer to the page 191 for the specific topic coverage of each workbook.

Three different packages are available Wind Power Basic Package 596083 Learn the fundamental principles of wind power in a cost-effective package. The most important components at a glance: 1 1x Wind Turbine Generator/Controller 595061 2 1x Wind Turbine Load Resistors 594819 1x Resistive Load 594820 1x 48 V Lead-Acid Battery Pack 595059 1x 4-Quadrant Power Supply and Dynamometer Controller (including Manual and Computer-Based Control, Pb-Acid Battery Charger, Turbine Emulator) 596127 1x 4-Quadrant Dynamometer Motor 595062 1x AC 24 V Power Supply 772050 1x Timing Belt 793141 1x Protective Guard Side-by-side 794195 1x Introduction to Wind Power (Instructor Guide) 603893 Also order Workbook: Wind Power Required accessories for the basic package 2x Digital Multimeter 579782 1 Wind Turbine Generator/ 1 Controller The Wind Turbine Generator/ Controller is a tabletop module that provides a wind turbine for experimentation. It can be coupled to a dynamometer motor to be externally driven. Turbine type: Direct-drive, fixedpitch Nominal power: 200 W at a wind speed of 12.5 m/s 2 Charge voltage setpoint range: 54.4 68.0 V Recommended battery pack voltage: 48 V Diode rectifier 110 V 5 A Dimensions (H x W x D) 211 x 200 x 370 mm Order no. 595061 Wind Power Advanced Package 596084 Learn how to produce power and use. The most important components at a glance: 1 1x Wind Turbine Generator/Controller 595061 1x DC 48 V Lamps 595055 1x AC 230 V Lamps 595056 1x 48 V Lead-Acid Battery Pack 595059 1x AC 24 V Power Supply 772050 1x 1 AC 230 V Stand-Alone Inverter 595052 1x 4-Quadrant Power Supply and Dynamometer Controller (including Manual and Computer-Based Control, Pb-Acid Battery Charger, Turbine Emulator) 596127 1x 4-Quadrant Dynamometer Motor 595062 1x Data Acquisition and Control Interface (including computer-based instrumentation for 2x current inputs and 2x voltage inputs) 595912 1x Timing Belt 793141 1x Protective Guard Side-by-side 794195 1x Wind Power Systems (Instructor Guide) 603896 Also order Workbook: Wind Power Systems Required accessories for the advanced package 2 Wind Turbine Load Resistors The Wind Turbine Resistive Load is an A4 module that provides a resistive electrical load for wind turbine experiments. Resistance Value (each resistor) 15 Ω Nominal Voltage: 38 V AC/DC Max. Current: 2.53 A (each resistor) Resistance Accuracy: ± 5% Load at Nominal Voltage (each resistor): 84 W Overcurrent Protection (each resistor) Thermal circuit breaker: 3 A Weight: 5.0 kg Order no. 594819 Also order: Workbooks Wind Power Complete Package 596085 Contains both basic and advanced package in one complete solution Required accessories for the complete package 2x Digital Multimeter 579782 A paper copy of the corresponding Instructor Guide is included if you order by package Introduction to Wind Power The exercises in the workbooks contain the theory and lab manipulations to cover the following exercises: Voltage-Speed Characteristic of a Wind Turbine Generator Torque-Current Characteristic of a Wind Turbine Generator Power versus Wind Speed Storing Energy from a Wind Turbine into Batteries Campus licence www.festo-didactic. com, en 596126 Student Manual, en 603893 Instructor Guide, en 603896 Wind Power Systems The exercises in the workbooks contain the theory and lab manipulations to cover the following exercises: Stand-Alone Wind Power Systems for DC Loads Stand-Alone Wind Power Systems for AC Loads Campus licence www.festo-didactic. com, en 596126 Student Manual, en 593989 Instructor Guide, en 593991

Accessories Wind power training packages 1 Resistive Load The Resistive Load is an A4 module that provides a universal resistive electrical load for a wide range of experiments. Three banks of manually switchable resistive loads Resistance Values (Each Bank): 1100/2200/4400 Ω Nominal Voltage: 230 V AC/DC Resistance Accuracy: ± 5% Load at Nominal Voltage (Each Bank): 84 W Dimensions (H x W x D) Order no. 594820 2 4-Quadrant Power Supply and 1 2 Dynamometer Controller The 4-Quadrant Power Supply and Dynamometer Controller is an A4 module that offers two main operating modes: Power supply and dynamometer. For the dynamometer, a dynamometer motor is also required. In the power supply mode, the unit acts as a versatile four-quadrant voltage or current source, in the dynamometer mode the unit acts as a fully configurable mechanical brake or prime mover. Order no. 596127

Accessories Solar and wind power training packages 1 4-Quadrant Dynamometer Motor The 4-Quadrant Dynamometer Motor consists of a tabletop motor that is used as a complete 4-Quadrant dynamometer in conjunction with the 4-Quadrant Power Supply and Dynamometer Controller. This dynamometer can then act as a prime mover, a brake, a motor test bench and can also emulate various types of predefined loads and even custom ones. Torque: 0 to 3 Nm Direction of Rotation: CW/CCW Speed: 0 to 2500 r/min Nominal Power: 350 W Protection: Detachable protective cover with interlocking start switch 232 x 207 x 377 mm Order no. 595062 2 DC 48 V Lamps Mounted on a A4 module Lamp types: 1x LED and 1x incandescent Voltage: 48 V DC Current: 1.5 A Input protection: Reverse polarity and overvoltage (60 V) Order no. 595055 3 AC 230 V Lamps Mounted on a A4 module Lamps types: Incandescent, CFL and LED Voltage: 230 V 50/60 Hz Current: 0.36 A Order no. 595056 4 48 V Lead-Acid Battery Pack 4x 12 V lead-acid batteries mounted in series in an A4 module Nominal voltage: 48 V DC (12 V for each battery) Nominal capacity: 9 Ah Maximum charge current: 2.7 A Maximum discharge current: 7 A Breaker: 10 A Order no. 595059 5 AC 24 V Power Supply 1 5 The AC 24 V power supply is an A4 module that provides auxiliary power for various system components. Input Voltage: 230 V/50 60 Hz/ 0.3 A (max.) Inlet via IEC C14 terminal Main switch with integrated 0.3 A thermal beaker Output voltage: 24 V/50 60 Hz/ 2. 5 A (max.) Outlet via dedicatd barrel connectors (2) 5.5/2.1 mm 2 6 LED indicator for output voltage Weight: 2.8 kg Order no. 772050 6 1 AC 230 V Stand-Alone Inverter The 1 AC 230 V Stand-Alone Inverter converts a DC power source such as batteries in an AC power source for off-the-grid applications. Inverter type: pure sine wave 3 7 Nominal output power: 300 W Output voltage: 1 AC/230 V/50 Hz/ 1.4 A (max.) Input voltage: DC 48 V Input protection: Reverse polarity and overvoltage (64 V max.) Output protection: Inverter built-in shortcircuit and overload protection 297 x 266 x 212 mm 4 Order no. 595052 7 Data Acquisition and Control Interface The Data Acquisition and Control Interface (DACI) is verstatile and complete device in an A4 module used for measuring, observing, and analyzing electrical and mechanical parameters in electric power systems and power electronics circuits. Order no. 595912 Leliestraat 1A 8051 CX Hattem Tel: 038 4475750 Email: verkoop@brinktechniek.nl