High Torque Spindle Motors GM Range
GM Range High Torque spindle motors State-of-the art technology GM was developed by KESSLER and REDEX, worldleaders in machine-tool systems, to offer high performance hollow shaft liquid cooled motors. These motors integrate a gearbox allowing high-torque and high-speed in a record diameter. GM range goes from 8 up to 1 Nm in 6 different sizes with a top speed of 12 rpm. Hollow shaft diameter goes from 29 to 6 mm. GM motor range has been optimized for performance and reliability. Mechatronics integration avoids redundant bearings and interfaces in order to achieve compactness, large hollow shaft for easy integration, and thermal stability. Speed changer, cooling and encoder feedback are conveniently located at the back of the motor. GM range relies on several worldwide patents. It is the result of a partnership between 2 European trend setters in machine-tool systems. GM are fully compatible with conventional control systems. Options such as rotary unions, clamping systems, encoders or spindle heads, round off the portfolio. GM are the most technically advanced solution for high performance milling spindles. They are the ideal choice for spindle dedicated to hard material milling and for achieving high productivity in a constrained environment. 1
High Torque Spindle Motors GM8 1369,5 974 841 782 125 11 585 88 55 m6.2 A-B A 3 3 B 25 29 Through all 246 248 g5 246 25 g5.3 A 115 25 28.15 A-B 12 x Ø 6,5 on Ø 265 Dimensions and main data for information only, please consult us and/or refer to Product DataSheet Technical features Torque S1 [Nm] 76 Torque S6 (4 %) [Nm] 113 Power S1 [kw] 24 Power S6 (4 %) [kw] 35 Speed [rpm] 12 Motor type asynchronous Mounting position vertical and horizontal Control Siemens/Fanuc/Heidenhain Interface [Nm] plain shaft Cooling/Flow rate [l/mn] 25 Coolling/Loss power [kw] 6 Bearings lubrification grease Lubrification/Flow rate [l/mn] 1.5 Lubrification/Loss power [kw].45 Speed shifting/pressure [bar] 5 to1 Speed shifting/flow rate [l/mn] 5 to 7 Options rotary union clamping system spindle head flow rate max 8l/mn - max speed 15 rpm stroke 17 mm, with sensor contact us 2
Service S1-1% 8 7 6 5 757 23.8 24.5 4. 35. 3. 25. 4 2. 3 16.5 17. 15. 2 1. 1 156 2 66 4 6 8 1 14 12 14 5. Ratio Torque Power Service S6-4% 1:1 5:1 16 14 12 1 35.4 1127 36.5 4. 35. 3. 25. 8 6 16.5 17. 2. 15. 4 1. 2 232 5. 2 66 4 6 8 1 14 12 14 3
GM13 1493 1115 947 847 18 65 m6.2 A-B 14 616 3 3 A B 71 25 266 268 g5 266 115 272 3 35 Through all 27 g5.3 A.15 A-B 16 x Ø 6,5 on Ø 285 Dimensions and main data for information only, please consult us and/or refer to Product DataSheet Technical features Torque S1 [Nm] 124 Torque S6 (4 %) [Nm] 185 Power S1 [kw] 39 Power S6 (4 %) [kw] 58 Speed [rpm] 9 Motor type synchronous Mounting position vertical and horizontal Control Siemens/Fanuc/Heidenhain Interface [Nm] plain shaft Cooling/Flow rate [l/mn] 33 Coolling/Loss power [kw] 7,5 Bearings lubrification grease Lubrification/Flow rate [l/mn] 2 Lubrification/Loss power [kw].65 Speed shifting/pressure [bar] 5 to1 Speed shifting/flow rate [l/mn] 5 to 7 Options rotary union clamping system spindle head flow rate max 8l/mn - max speed 15 rpm stroke 17 mm, with sensor contact us 4
Service S1-1% 16 14 12 38.8 1235 4. 4. 35. 3. 1 8 24.3 25. 25. 2. 6 15. 4 2 255 2 129 4 6 8 27 1 12 1. 5. 14 Ratio Torque Power Service S6-4% 1:1 5:1 24 21 18 1853 58.2 6. 8. 7. 6. 15 5. 12 4. 9 6 3 382 24.3 25. 3. 2. 1. 129 2 4 6 8 27 1 12 14 5
High Torque Spindle Motors GM2 1538 1155 982 897 18 144 4 A 65 B 4 71 3 36 36 75 m6.2 A-B 31 g5.3 A 115 31 38 g5 35.15 A-B 15 x Ø 8,5 on Ø xxx Dimensions and main data for information only, please consult us and/or refer to Product DataSheet Technical features Torque S1 [Nm] 183 Torque S6 (4 %) [Nm] 246 Power S1 [kw] 58 Power S6 (4 %) [kw] 78 Speed [rpm] 8 Motor type asynchronous Mounting position vertical and horizontal Control Siemens/Fanuc/Heidenhain Interface [Nm] plain shaft Cooling/Flow rate [l/mn] 36 Coolling/Loss power [kw] 7,65 Bearings lubrification grease Lubrification/Flow rate [l/mn] 2,5 Lubrification/Loss power [kw].75 Speed shifting/pressure [bar] 5 to1 Speed shifting/flow rate [l/mn] 8 to 1 Options rotary union clamping system spindle head flow rate max 8l/mn - max speed 15 rpm stroke 17 mm, with sensor contact us 6
Service S1-1% 4 35 3 25 58.2 6. 8. 7. 6. 5. 2 2316 4. 15 3. 1 2. 5 478 2 39 4 6 8 72 1 12 1. 14 Ratio Torque Power Service S6-4% 1:1 5:1 4 35 3 77.6 8. 8. 7. 6. 25 2 247 5. 4. 15 3. 1 2. 5 59 1. 2 4 6 8 1 12 14 7
GM3 1773 136 1162 162 138 17 76 11 85 m6.2 A-B A 4 4 3 346 348 g5 346 35 g5.3 A 115 35 44 Through all 39.15 A-B 16 x Ø 8,5 on Ø 37 Dimensions and main data for information only, please consult us and/or refer to Product DataSheet Technical features Torque S1 [Nm] 29 Torque S6 (4 %) [Nm] 324 Power S1 [kw] 91 Power S6 (4 %) [kw] 12 Speed [rpm] 7 Motor type asynchronous Mounting position vertical and horizontal Control Siemens/Fanuc/Heidenhain Interface [Nm] plain shaft Cooling/Flow rate [l/mn] 36 Coolling/Loss power [kw] 7,5 Bearings lubrification grease Lubrification/Flow rate [l/mn] 3 Lubrification/Loss power [kw] 1 Speed shifting/pressure [bar] 5 to1 Speed shifting/flow rate [l/mn] 8 to 1 Options rotary union clamping system spindle head flow rate max 8l/mn - max speed 15 rpm stroke 17 mm, with sensor contact us 8
Service S1-1% 4 35 3 293 16. 14. 12. 25 2 91.2 94. 1. 8. 15 6. 1 4. 5 484 598 128 2 4 6 8 2. 1 12 14 Ratio Torque Power Service S6-4% 1:1 5:1 4 35 3 25 3242 11.9 15. 16. 14. 12. 1. 2 8. 15 6. 1 4. 5 54 669 143 2 4 6 8 2. 1 12 14 9
info@machine-tool-drives.com www.machine-tool-drives.com RX_GB_24_4