ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output Power... 0W Spindle Accuracy... Within μm Standard Size Collet (CHA-.)... ø/" < Optional > Air Line Kit (AL-00)... For Control Unit NE0 Collet (CHA-[][])... ø0. mm-ø.0 mm (See Page -p for details) (EMCD-0-[][])... Length ft (9) / 9 ft (99) / ft (90) Provided with Air Cooling Hose ø mm Connection Drawing The motor and spindle require dry, clean, regulated air. Please refer to the drawing to the right for proper components. Air Line Kit AL-00 supplies clean dry air to the control unit through the filter and the regulator. Compressor The Ultra-Precision, High-Speed spindles allow you to use your existing equipment for a much larger variety of operations. Conventional milling machines and machining centers can now do high-speed machining, small diameter drilling and milling with extremely good surface finishes with the. Max. Output 0W Features 0,000-0,000 min - (rpm) Cooling Air Clean dry air is required to cool the motor and protect the spindle Maximum Output 0W from contaminants. Please use a filter and regulator. The motor is a brushless DC motor that utilizes hall (Proper air pressure -PSI) (Use Air Line Kit AL-00) elements and rare-earth magnets to achieve max. output 0W in a very compact size. Large Variety of Tapers Available BT, NT, CAT, ST and HSK A tapers are available. Ceramic Bearings The spindle uses a double pair of ceramic bearings in the front and Protection Circuit in the rear. This arrangement maximizes both radial and axial The control unit is compact and lightweight. It features a rigidity to insure extremely high-precision cutting. protection circuit to stop the motor automatically in case of The motor also uses ceramic bearings to maximize life expectancy. overload ensuring safe and smooth operation. Smooth Rotation The absence of a commutator and the use of a photo coupler sending a feedback signal of pulses per revolution result in very smooth rotation with low vibration throughout the speed range. One-Piece motor and spindle construction The motor and spindle are built as a single unit minimizing size and weight and allowing usage on a very wide variety or machines. Emergency Connector The system incorporates an emergency, breakaway connector to help prevent system damage in case the machine's main spindle is rotated accidentally. Excellent Durability by air-cooling system Air-cooling motor uses a small volume of air (0. CFM) to prevent heat buildup and allow long, continuous operation. Best for small diameter drilling and milling Less than ø0.0"(ø mm) small diameter drilling and milling with extremely good surface finishes, using a high-speed brushless motor. Note : is sold separately. Air Line Kit AL-00 (Refer to -p in detail) Torque & Output Power Characteristic of 9 Output 00 0 Torque 00 0 00 0 Continuous Duty Area 0 0 0 0 0 0 0 0 0 Speed ( x 0 min - ) Control Unit NE0 (Refer to -p in detail) AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - Torque (cn. m) 00 0 Output (W)
ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE COOLANT HES Series can be used in conjunction with water or oil based coolants. Note : is sold separately. -BT0 0 (.") (.9").9" (.") (.") ø0 mm ø9.mm ø. mm 0 All HES Series Spindles incorporate an emergency connector BT0 -BT0 Emergency Connector Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. -BT0. lb.,0.00 Wrench ( x ), (9 x ) : pc. each -BT0 / NT0 / CAT0 0 ø0 mm ø9. mm ø. mm (.") (.")." 0 (.90") (.") BT0 ø mm ø0 mm ø9. mm ø. mm (.") ø mm (.")." 0 (.") (.99") NT0." ø mm ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 ø0 mm ø9. mm ø. mm (.") (.") 0 (.") (.9") -BT0.9" CAT0 -CAT0 -BT0 -NT0 90 -CAT0 Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. Wrench ( x ), (9 x ) : pc. each ø. mm -NT0. lb..0 lb.,9.00. lb. AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - For dimensions of taper shanks, please see page -p0. Order by catalog number. -p
ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE COOLANT Note : is sold separately. Emergency Connector All HES Series Spindles incorporate an emergency connector." -BT0 0 (9.") (.") (.") (.") 0.0" BT0 ispeed E0 ø0 mm ø9. mm ø. mm ø00 mm E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -HSK A HSK A ø0 mm ø9. mm ø. mm (.") (.0") 0 (.") (.0") -BT0 Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. -BT0 0.0 lb. Wrench ( x ), (9 x ) : pc. each,.00." HSK A ø mm -HSK A Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. -HSK A. lb. Wrench ( x ), (9 x ) : pc. each,.00 -p AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) -
ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Note : is sold separately. Emergency Connector All HES Series Spindles incorporate an emergency connector." -ST ST (.") (.")." 0 Mx. depth (.0").0" 0." ø0 mm ø9. mm ø. mm ø mm ø mm ispeed E0 E0 -ST Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. -ST.0 lb. Wrench ( x ), (9 x ) : pc. each,9.00 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 0 WEST DUARTE ROAD, #E MONROVIA, CA USA 90- Tel: () - Fax: () -00 Toll Free USA Tel: (00) - Fax: (00) -0 Email: info@artcotools.com Caution If the machine's main spindle is rotated by mistake, the Emergency Connector on the motor is designed to separate. In order for the Emergency Connector to function as designed it must be set and positioned correctly. Please refer to the owner's manual for proper installation and check the integrity of the Emergency Connector and suspension prior to each use. For dimensions of taper shanks, please see page -p,. Order by catalog number. -p
CONTROL UNIT AC00-0V for international operation,000~0,000 min- (rpm) Maximum Output 0W CAT. No. CONTROL UNIT NE0 0,000 min - (rpm) ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 : Load Meter LOAD : Continuous load area : Intermittent load area : Overload External Input-Output Connector A (D-SUB Female) External Input-Output Connector B (D-SUB Female) Motor Connector Air Output Joint ø mm Air Input Joint ø mm Power Switch Communicate Connector Inlet with Power Fuse E00 Control Unit." CAT. No. Plug Type Model Standard Equipment Accessories 9." [] Load Meter [] Running LED (RUN) [] Warning LED (WARNING) [] Error LED (ERROR) [] Error Reset Switch (RESET) [] Gear Setting Switch (GEAR) [] Control Switch (AUTO/NUAL) [] Rotating Direction Selector Switch (FWD./REV.) [9] Start Switch (START) [0] Motor Speed Adjustment Switch (SPEED) [] Display [] [] [0] [] [] [] [] [] [] [9] Specifications Model : NE0 Power Source : AC0V Motor Speed :,000-0,000 min - (rpm) Max. Output Power : 0W Power Consumption :.A Air Flow Volume :.0CFM (-PSI) Weight : lb.. oz. Dimensions : W." x D." x H9." [] Price For 00V (A type) 0V For Japan NE0 Power Source Plug Plug Type Main Usable Area Product For 0V (B type) For U.S.A. and Canada Power Cord : ft Air Hose with filter Reducer Air Plug (Provided) Connector Cap (Provided) Bracket Power Cord Grip Screw Rubber Pad Fuse (T.AL) 0V: pcs. Please refer to Technical Data -p~p in detail about External Input-Output Connector. AC00-0V for international operation. Please check the power source plug type and order accordingly. Plug Type Main Usable Area Product For 00V (C type) For 0V (D type) Without Plug For Europe,0.00 -p AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) -
& MOTOR CORD CAT. No. AL00."." PF/.0"."."." MOTOR CORD Product AL-00 9.0" 0.9"." 0.9" CAT. No. Description Model Length M 9 ft EMCD-0-M 99 90 M EMCD-0-M M EMCD-0-M The AL-00 is a Clean air supply unit. Dust in the compressed air is eliminated by the filter in the first stage and the regulator provides accurate and stable air to the control unit. Air Line Kit (For ø mm Hose Filter Mesh 0. μm) Price AL00 9 ft ft CONTROL PANEL EXTENSION CORD HES Purchasing Example AL-00 Standard Equipment Accessories Air Cooling Hose : ø mm Reducer Plug Cap Air Filter Air Regulator Air Pressure Gauge Air ON-OFF Valve Hose for Piping (K-) : ft Fit to 0.00 Price.00 0.00 9.00 Control Panel Extension Cord CAT. No. Model For use with Price 0 - PEX- NE0.00 HES Purchasing Example Description CAT. No. Model Price Spindle with CAT0 90 -CAT0,9.00 Control Unit NE0,0.00 ft 9 EMCD-0-M.00 Air Line Kit AL00 AL-00 0.00 Total,0.00 ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + (00) - Order by catalog number. -p