polypropylene section guide application guide standards and approvals

polypropylene Polypropylene (PP) piping systems are widely used in industrial processing. Light in weight yet with high impact strength and reliable heat fusi welding, PP also offers good abrasi resistance and is a good thermal and electrical insulator. PP is suitable for working use at temperatures up to 90 C, and will withstand short term use at a maximum 110 C. Chemical resistance is excellent: PP is resistant to aqueous solutis of acids, alkalis and salts, and to a large number of organic solvents. PP systems are assembled using heat fusi welding, either using socket fittings or butt fusi of pipes and/or fittings end to end. Welding equipment is available for sale or hire and is featured in Secti 13. applicati guide Temperature range 0 C to 90 C (Short Term 110 C) High impact strength Abrasi resistant Suitable for handling foodstuffs Ideal for above and below ground use Threading possible Resistant to acids, alkalis, salts and many organic solvents Good insulator Lightweight (density 0.905-0.92) Welding equiment required Not resistant to ccentrated oxidising acids Thermal expansi is higher than other plastics secti guide Pipe-H Homopolymer - mm Size 246 Pipe - Copolymer - mm Size 247 Socket Fusi Fittings - mm Size 248 Socket Fusi Adaptor Fittings - mm Size 248 Socket Fusi Flanges - mm Size 249 Fusi Spigot Fittings - mm Size 250 Fusi Spigot Adaptor Fittings - mm Size 256 Fusi Spigot Flanges - mm Size 257 Flame Retardent Pipe and Fittings 260 Flame Retardent Electrically Cductive Pipe and Fittings 262 Basket Strainer 264 Bag Filter 265 Ball Valve, Double Uni 266 Diaphragm Valve 268 Needle Valve 269 T and L-Port Ball Valve 270 Butterfly Valve 272 N-Return Valve, Wafer Check 276 Air Release Valve 278 Foot Valve 278 N-Return Valve, Check 279 Line Strainer 281 Gauge Guard 281 Ball Valve, Electrically Actuated 282 Ball Valve, Pneumatically Actuated 284 Diaphragm Valve, Actuated 285 Pressure Reducing Valve 286 Pressure Relief Valve 290 standards and approvals Pipe : BS 5556: 1978, DIN 8077/8078 Fittings : DIN 16962 Threaded fittings : BS21/DIN 2199/ISO 727 IPS Flow Systems Seaham Grange Industrial Estate, Seaham, Co Durham, SR7 0PT, England Tel: +44+ 191 521 3111 Fax: +44+ 191 521 3222 E-mail: sales@ipsflowsystems.com Website: www.ipsflowsystems.com

about: polypropylene Polypropylene (PP) is a thermoplastic from the polyolefin group of materials. It has low density compared to other thermoplastics, and a unique combinati of properties including mechanical strength, chemical resistance and thermal stability. There are two different types of polypropylene that are in comm use as piping materials: PP-H (Homopolymer) PP-R (Random copolymer) The pipes, sheets and semi-finished products supplied by IPS are manufactured from nucleoid PP-H 100 (Beta ß -PP), whilst fittings are produced from PP-R (polypropylene random copolymer). Polypropylene generally exhibits a good resistance against a variety of chemicals, such as salts, acids, and alkalis. Good chemical resistance is also achieved against ctact with solvents, such as alcohols, esters and ketes. Csequently, solvent cement welding of polypropylene pipes and fittings is not possible. There are a number of welding techniques suitable for pressure piping applicatis. High quality, reliable joints can be achieved using socket fusi jointing, butt fusi welding, n-ctact Infra-Red (IR) butt welding, and electrofusi welding. In additi, polypropylene systems can be joined using flanges, threaded cnectis and mechanical couplings. Polypropylene piping systems are available from IPS in metric dimensis according to DIN 8077/8078 and DIN 16962. General properties of polypropylene Polypropylene exhibits thermal stability up to 100 C (shortterm 120 C for drainage systems). Polypropylene also shows good impact strength, improving further alg with increasing temperature. Polypropylene is physiologically n-toxic (in accordance with ONORM B5014, Part 1, FDA, BGA, and KTW guidelines) making it ideally suited for a piping material in ctact with potable water. Some important advantages of polypropylene are: - Low specific weight of 0.91g/cm 3 - High lg term creep resistance - Excellent chemical resistance - High resistance to thermal ageing - Outstanding welding characteristics - Excellent abrasi resistance - Smooth internal surfaces Properties of Polypropylene (Average values) Property PP-H PP-R Density 0.91g/cm 3 0.91g/cm 3 Tensile Strength 30 MPa 25 MPa Elgati at Break >300% >300% Notched Impact Strength at 23 C 50 kj/ m 2 25 kj/ m 2 Notched Impact Strength at -30 C 5 kj/ m 2 2 kj/ m 2 Modulus of Elasticity 1300MPa 900 MPa Coefficient of Linear Expansi 0.16mm/m C 0.16mm/m C Maximum Operating Temperature 90 C 90 C Minimum Operating Temperature -10 C -10 C Crystalline Melting Temperature 160-165 C 150-154 C Melt Flow Index 0.50 g/10min 0.50g/10min Surface Resistance >10 13 Ω >10 13 Ω Thermal Cductivity 0.22 W/m K 0.24 W/m K Flammability HB UL94 HB UL94 Colour - Beige Grey 7032 RAL 7032 RAL Characteristics Chemical resistance The chemical resistance of polypropylene is csidered excellent. It is resistant to dilute (aqueous) solutis of salts, acids and alkalis and to a large number of organic solvents. Polypropylene is resistant to ccentrated hydrochloric acid and hydrofluoric acid, however above certain ccentrati levels diffusi can occur. This does not damage the material itself but it can cause secdary damage to surrounding steel cstructis. In this type of applicati, double ctainment piping systems have been found ideally suited. Note: PP-R and Copper: Direct ctact between PP-R and copper, especially at higher temperatures, can lead to deteriorati of the physical properties of PP-R. Heat ageing is faster due to the accelerated thermal oxidisati. Weathering resistance Piping systems in beige grey polypropylene are not UV stabilised, and therefore they should be suitably protected against degradati when used outdoors - especially where there are high UV levels. Protecti against direct solar radiati can be achieved by the applicati of a UV absorbent coating such as AGRU Coat, or by adding a layer of insulati. It is also possible to compensate for the surface damage that may arise by increasing the wall thickness of the piping system. In such cases, the additial wall thickness should be not less than 2mm. As polypropylene does not ctain light stable colour pigments, it may experience a change of colour (fading) because of lg-term weathering. Electrical characteristics Polypropylene is n-cductive, therefore systems will remain free from electrolytic corrosi. Precautis should be taken to avoid static discharge should any part of a Polypropylene piping system pass through an area where explosive gases may be present. Physiological characteristics Polypropylene piping systems from IPS are physiologically ntoxic (in accordance with ONORM B5014, Part 1, FDA, BGA, and KTW guidelines) making them ideally suited as a piping material in ctact with potable water. 242

about: polypropylene Pressure ratings for polypropylene systems Maximum ctinuous pressure ratings Pipes, fittings and valves are designed to operate ctinuously for 50 years at their maximum rated pressure at 20 C as follows, unless otherwise stated. The pressure ratings for Polypropylene pipes according to DIN 8077 & DIN 8078 and Polypropylene fittings according to DIN 16962 are defined by the nominal pressure method, whereby pipes, fittings and valves are grouped together according to a single nominal pressure rating. The PN rating is the maximum permitted operatial pressure in bars calculated at 20 C, for example PN6 indicates a maximum working pressure of 6 bars. According to this method the pressure ratings of Polypropylene pipes and fittings according to the nominal pressure system is as follows:- Size Range Max. Operating Pressure Pipe PN16 10mm to 225mm 16 Bar PN10 16mm to 500mm 10 Bar PN6 20mm to 710mm 6 Bar PN4 40mm to 1000mm 4 Bar PN3.2 50mm to 1200mm 3.2 Bar PN2.5 63mm to 1400mm 2.5 Bar Size Range Max. Operating Pressure Fittings Socket Fusi PN10 20mm to 110mm 10 Bar Spigot Fusi PN10 20mm to 500mm 10 Bar PN6 50mm to 1000mm 6 Bar PN3.2 110mm to 1000mm 3.2 Bar Threaded PN10 1/ 4" to 4" 10 Bar Standard Dimensial Ratio (SDR) Standard Dimensial Ratio (SDR) is used to define thermoplastic pipes in a variety of materials including polypropylene, polyethylene, and PVC-U. Taken from ISO 4065, SDR is described as being the ratio of the nominal outside diameter of a pipe to its nominal wall thickness. To calculate the SDR according to ISO 4065 the following equati can be used: SDR = d e where: SDR = Value to be calculated e = Thickness of the pipe wall (mm) d = Pipe outside diameter (mm) d SDR = d/e e Jointing Polypropylene Systems PP pipe to pipe and pipe to fitting joints are easy to make, using socket fusi, butt fusi or electrofusi welds. Socket Fusi Butt Fusi Infra-Red (IR) Fusi Electro-Fusi Heating Socket Heating Element Heating Spigot Heating Element Fitting Heating Element Fitting Electro-fusi Socket Pipe Fitting Pipe Pipe Pipe Pipe Individual Parts Individual Parts Individual Parts Individual Parts Heating Heating Heating Heating Finished Joint Finished Joint Finished Joint Finished Joint Welding equipment is available for sale or hire - see Tools and Installati Equipment. Detailed installati instructis, as well as free training, is available request. 243

polypropylene pipe availability - PP-H Metric Sizes DIN 8077/8078 Series Ventilati S-20 S-16 S-12.5 S-8.3 S-5 S-3.2 SDR - SDR41 SDR33 SDR26 SDR17.6 SDR11 SDR7.4 Size Working Pressure - PN2.5 PN3.2 PN4 PN6 PN10 PN16 10 O.D. (mm) Wall (mm) Weight/m (kg) 12 O.D. (mm) 12 Wall (mm) 2.0 Weight/m (kg) 0.06 16 O.D. (mm) 16 Wall (mm) 1.8 Weight/m (kg) 0.08 20 O.D. (mm) 20 20 Wall (mm) 1.9 2.8 Weight/m (kg) 0.14 0.15 25 O.D. (mm) 25 25 Wall (mm) 2.3 3.5 Weight/m (kg) 0.16 0.23 32 O.D. (mm) 32 32 32 Wall (mm) 2.0 2.9 4.4 Weight/m (kg) 0.17 0.26 0.37 40 O.D. (mm) 40 40 40 40 Wall (mm) 1.8 2.3 3.7 5.5 Weight/m (kg) 0.22 0.27 0.41 0.58 50 O.D. (mm) 50 50 50 50 50 Wall (mm) 2.0 2.0 2.9 4.6 6.9 Weight/m (kg) 0.27 0.30 0.42 0.64 0.90 63 O.D. (mm) 63 63 63 63 63 63 Wall (mm) 1.8 2.0 2.5 3.6 5.8 8.6 Weight/m (kg) 0.35 0.38 0.47 0.66 1.01 1.41 75 O.D. (mm) 75 75 75 75 75 75 Wall (mm) 1.9 2.3 2.9 4.3 6.8 10.3 Weight/m (kg) 0.44 0.52 0.65 0.93 1.40 2.00 90 O.D. (mm) 90 90 90 90 90 90 Wall (mm) 2.2 2.8 3.5 5.1 8.2 12.3 Weight/m (kg) 0.60 0.76 0.94 1.32 2.02 2.86 110 O.D. (mm) 110 110 110 110 110 110 Wall (mm) 2.7 3.4 4.2 6.3 10.0 15.1 Weight/m (kg) 0.90 1.11 1.36 1.98 3.01 4.29 125 O.D. (mm) 125 125 125 125 125 125 Wall (mm) 3.1 3.9 4.8 7.1 11.4 17.1 Weight/m (kg) 1.17 1.45 1.76 2.54 3.89 5.52 140 O.D. (mm) 140 140 140 140 140 140 Wall (mm) 3.5 4.3 5.4 8.0 12.7 19.2 Weight/m (kg) 1.48 1.78 2.21 3.20 4.87 6.93 160 O.D. (mm) 160 160 160 160 160 160 Wall (mm) 4.0 4.9 6.2 9.1 14.6 21.9 Weight/m (kg) 1.91 2.32 2.89 4.15 6.38 9.04 180 O.D. (mm) 180 180 180 180 180 Wall (mm) 4.4 5.5 6.9 10.2 16.4 Weight/m (kg) 2.36 2.94 3.63 5.22 6.05 200 O.D. (mm) 200 200 200 200 200 200 Wall (mm) 3.0 4.9 6.2 7.7 11.4 18.2 Weight/m (kg) 1.83 2.92 3.65 4.50 6.47 9.92 225 O.D. (mm) 225 225 225 225 225 Wall (mm) 5.5 6.9 8.6 12.8 20.5 Weight/m (kg) 3.70 4.57 5.65 8.19 12.60 250 O.D. (mm) 250 250 250 250 250 250 Wall (mm) 3.5 6.2 7.7 9.6 14.2 22.7 Weight/m (kg) 2.66 4.59 5.67 6.99 10.10 15.50 280 O.D. (mm) 280 280 280 280 280 Wall (mm) 6.9 8.6 10.7 15.9 25.4 Weight/m (kg) 5.73 7.09 8.72 12.60 19.40 315 O.D. (mm) 315 315 315 315 315 315 Wall (mm) 5.0 7.7 9.7 12.1 17.9 28.6 Weight/m (kg) 4.74 7.19 8.97 11.10 16.00 24.60 355 O.D. (mm) 355 355 355 355 355 355 Wall (mm) 6.0 8.7 10.9 13.6 20.1 32.2 Weight/m (kg) 6.39 9.14 11.30 14.00 20.20 31.10 400 O.D. (mm) 400 400 400 400 400 Wall (mm) 6.0 9.8 12.3 15.3 22.7 Weight/m (kg) 7.20 11.60 14.40 17.70 25.70 450 O.D. (mm) 450 450 450 450 450 Wall (mm) 6.0 11.0 13.8 17.2 25.5 Weight/m (kg) 8.10 14.60 18.20 22.40 32.50 500 O.D. (mm) 500 500 500 500 500 Wall (mm) 8.0 12.3 15.3 19.1 28.3 Weight/m (kg) 11.90 18.10 22.30 27.60 40.10 560 O.D. (mm) 560 560 560 560 560 Wall (mm) 8.0 13.7 17.2 21.4 31.7 Weight/m (kg) 13.41 22.60 28.10 34.60 50.30 630 O.D. (mm) 630 630 630 630 630 Wall (mm) 10.0 15.4 19.3 24.1 35.7 Weight/m (kg) 18.80 28.50 35.50 43.90 63.70 710 O.D. (mm) 710 710 710 710 Wall (mm) 12.0 17.4 21.8 27.2 Weight/m (kg) 25.30 36.30 45.20 55.80 800 O.D. (mm) 800 800 800 800 Wall (mm) 12.0 19.6 24.5 30.6 Weight/m (kg) 28.60 46.10 57.20 70.80 900 O.D. (mm) 900 900 900 900 Wall (mm) 15.0 22.0 27.6 34.4 Weight/m (kg) 40.10 58.10 72.50 89.40 1000 O.D. (mm) 1000 1000 1000 1000 Wall (mm) 15.0 24.5 30.6 38.2 Weight/m (kg) 44.60 72.00 89.20 110.00 1200 O.D. (mm) 1200 1200 1200 Wall (mm) 18.0 29.4 36.7 Weight/m (kg) 64.10 103.00 128.00 1400 O.D. (mm) 1400 1400 Wall (mm) 20.0 34.3 Weight/m (kg) 83.20 141.00 244

polypropylene pipe availability - PP-R and special grades Metric Sizes DIN 8077/8078 PP-R PPs: Flame Retardent PPs-el: Flame Retardent Electric Cductive Series S-5 Ventilati S-20 S-16 S-5 Ventilati S-16 S-8.3 S-5 SDR SDR11 - SDR41 SDR33 SDR11 - SDR33 SDR17.6 SDR11 Size Working Pressure PN10 - PN2.5 PN3.2 PN10 - PN3.2 PN6 PN10 20 O.D. (mm) 20 20 Wall (mm) 1.9 1.9 Weight/m (kg) 0.11 0.12 25 O.D. (mm) 25 25 Wall (mm) 2.3 2.3 Weight/m (kg) 0.16 0.17 32 O.D. (mm) 32 32 32 Wall (mm) 2.9 2.9 2.9 Weight/m (kg) 0.26 0.27 0.32 40 O.D. (mm) 40 40 Wall (mm) 3.7 3.7 Weight/m (kg) 0.41 0.42 50 O.D. (mm) 50 50 50 Wall (mm) 4.6 4.6 4.6 Weight/m (kg) 0.64 0.65 0.79 63 O.D. (mm) 63 63 63 63 Wall (mm) 5.8 2.0 5.8 5.8 Weight/m (kg) 1.01 0.39 1.03 1.25 75 O.D. (mm) 75 75 75 75 Wall (mm) 6.8 1.9 6.8 6.8 Weight/m (kg) 1.40 0.45 1.44 1.74 90 O.D. (mm) 90 90 90 90 90 Wall (mm) 8.2 2.2 8.2 2.8 8.2 Weight/m (kg) 2.02 0.62 2.08 0.93 2.52 110 O.D. (mm) 110 110 110 110 110 110 110 Wall (mm) 10.0 2.7 10.0 3.0 3.4 6.3 10 Weight/m (kg) 3.01 0.92 3.09 1.23 1.40 2.47 3.74 125 O.D. (mm) 125 125 Wall (mm) 11.4 3.1 Weight/m (kg) 3.89 1.20 140 O.D. (mm) 140 140 140 Wall (mm) 12.7 3.0 12.7 Weight/m (kg) 4.87 1.32 4.99 160 O.D. (mm) 160 160 160 160 160 160 Wall (mm) 14.6 3.0 14.6 3.0 4.9 9.1 Weight/m (kg) 6.38 1.53 6.55 1.81 2.88 5.18 180 O.D. (mm) 180 180 180 Wall (mm) 16.4 3.0 3.0 Weight/m (kg) 8.05 1.71 2.04 200 O.D. (mm) 200 200 200 200 200 Wall (mm) 18.2 3.0 3.0 6.2 11.4 Weight/m (kg) 9.92 1.90 2.27 4.57 8.07 225 O.D. (mm) 225 225 225 225 Wall (mm) 20.5 3.5 3.5 6.9 Weight/m (kg) 12.60 2.47 2.98 5.68 250 O.D. (mm) 250 250 250 Wall (mm) 22.7 3.5 3.5 Weight/m (kg) 15.50 2.75 3.32 280 O.D. (mm) 280 280 Wall (mm) 25.4 4.0 Weight/m (kg) 19.40 3.48 315 O.D. (mm) 315 315 315 315 Wall (mm) 28.6 5.0 5.0 9.7 Weight/m (kg) 24.60 4.91 5.88 11.14 355 O.D. (mm) 355 355 Wall (mm) 5.0 5.0 Weight/m (kg) 5.54 6.60 400 O.D. (mm) 400 400 400 Wall (mm) 36.3 6.0 6.0 Weight/m (kg) 39.5 7.39 8.94 450 O.D. (mm) 450 450 Wall (mm) 40.9 6.0 Weight/m (kg) 50.10 8.33 500 O.D. (mm) 500 500 Wall (mm) 45.4 8.0 Weight/m (kg) 61.8 12.3 560 O.D. (mm) 560 Wall (mm) 8.0 Weight/m (kg) 13.8 630 O.D. (mm) 630 Wall (mm) 10.0 Weight/m (kg) 19.3 710 O.D. (mm) 710* 710 Wall (mm) 40.2 12.0 Weight/m (kg) 80.7 26.0 800 O.D. (mm) 800* 800 Wall (mm) 45.3 12.0 Weight/m (kg) 103.0 29.30 900 O.D. (mm) 900 Wall (mm) 15.0 Weight/m (kg) 41.2 1000 O.D. (mm) 1000 Wall (mm) 15.0 Weight/m (kg) 45.9 1200 O.D. (mm) 1200 Wall (mm) 18.0 Weight/m (kg) 65.8 * SDR 17 245

pipe homo-polymer metric sizes PP-H Homopolymer Pipe Ventilati PN2.5/S-20/SDR41 PN3.2/S-16/SDR33 PN4/S-12.5/SDR26 Size Wall Code Price/m 40 50 3.0 12 705 0050 00 63 3.0 12 705 0063 00 75 3.0 12 705 0075 00 90 3.0 12 705 0090 00 110 3.0 12 705 0110 00 125 3.0 12 705 0125 00 140 3.0 12 705 0140 00 160 3.0 12 705 0160 00 180 3.0 12 705 0180 00 200 3.0 12 705 0200 00 20.01 applicati applicati applicati applicati applicati applicati applicati applicati applicati applicati 225 3.5 12 705 0225 00 250 3.5 12 705 0250 00 29.09 280 4.0 12 705 0280 00 applicati 315 5.0 12 705 0315 00 51.77 355 6.0 12 705 0355 00 62.71 400 6.0 12 705 0400 00 78.67 450 6.0 12 705 0450 00 104.31 500 8.0 12 705 0500 00 152.79 560 10.0 12 705 0560 00 213.45 630 10.0 12 705 0630 00 241.61 710 12.0 12 705 0710 00 325.24 800 12.0 12 705 0800 00 357.41 900 15.0 12 705 0900 00 544.16 1000 15.0 12 705 1000 00 605.13 1200 18.0 12 705 1200 00 917.85 1400 20.0 12 705 1400 00 1247.78 Code Price/m 12 705 0063 41 3.37 12 705 0075 41 4.22 12 705 0090 41 5.88 12 705 0110 41 8.60 12 705 0125 41 11.50 12 705 0140 41 14.39 12 705 0160 41 18.13 12 705 0180 41 22.98 12 705 0200 41 27.83 12 705 0225 41 35.33 12 705 0250 41 49.31 12 705 0280 41 59.12 12 705 0315 41 74.75 12 705 0355 41 99.30 12 705 0400 41 126.65 12 705 0450 41 189.21 12 705 0500 41 231.43 12 705 0560 41 290.04 12 705 0630 41 367.44 12 705 0710 41 467.53 12 705 0800 41 591.85 12 705 0900 41 788.06 12 705 1000 41 972.59 12 705 1200 41 1477.63 12 705 1400 41 2114.05 Code Price/m 12 705 0050 33 2.80 12 705 0063 33 3.87 12 705 0075 33 5.26 12 705 0090 33 7.63 12 705 0110 33 11.17 12 705 0125 33 14.63 12 705 0140 33 17.89 12 705 0160 33 23.33 12 705 0180 33 29.55 12 705 0200 33 36.67 12 705 0225 33 45.82 12 705 0250 33 56.97 12 705 0280 33 77.19 12 705 0315 33 97.68 12 705 0355 33 129.55 12 705 0400 33 165.01 12 705 0450 33 245.47 12 705 0500 33 300.46 12 705 0560 33 379.27 12 705 0630 33 478.60 12 705 0710 33 609.12 12 705 0800 33 770.85 12 705 0900 33 1032.70 12 705 1000 33 1270.77 12 705 1200 33 1922.57 Code Price/m 12 705 0040 26 2.13 12 705 0050 26 2.89 12 705 0063 26 4.55 12 705 0075 26 6.17 12 705 0090 26 8.99 12 705 0110 26 13.05 12 705 0125 26 16.88 12 705 0140 26 21.11 12 705 0160 26 27.68 12 705 0180 26 34.71 12 705 0200 26 43.01 12 705 0225 26 53.97 12 705 0250 26 66.78 12 705 0280 26 90.38 12 705 0315 26 115.09 12 705 0355 26 152.79 12 705 0400 26 193.14 12 705 0450 26 287.70 12 705 0500 26 354.19 12 705 0560 26 444.07 12 705 0630 26 563.69 12 705 0710 26 716.14 12 705 0800 26 908.48 12 705 0900 26 1213.39 12 705 1000 26 1493.28 Standard length 5m Please note that a transportati surcharge may be applied pipe diameters 250mm or larger - please enquire for details. Electrofusi Coupling Manufactured from PP-H (Homopolymer) material PN10 Size Code Price 20 11 375 0020 11 11.90 25 11 375 0025 11 13.53 32 11 375 0032 11 14.63 40 11 375 0040 11 15.35 50 11 375 0050 11 23.81 63 11 375 0063 11 24.96 75 11 375 0075 11 34.99 90 11 375 0090 11 46.81 110 11 375 0110 11 56.97 125 11 375 0125 11 80.62 140 11 375 0140 11 91.12 160 11 375 0160 11 104.43 180 11 375 0180 11 153.34 200 11 375 0200 11 177.30 225 11 375 0225 11 218.35 i Temperature De-Rating Factors Pressure ratings for Polypropylene pipework systems are always quoted at 20 C. As working temperature increases, the maximum working pressure decreases by the factor indicated. * For ctinuous use at these temperatures, csult our Customer Services Department Working Pressure Temperature ( C) De-Rating Factor 20 1.00 30 1.00 40 0.82 50 0.66 60 0.50 70 0.36 80 0.25 90* 0.13 100* 0.05 This data is provided for guidence ly. For specific projects please ctact our technical department 246

pipe homo-polymer and co-polymer PP-H Homopolymer Pipe PN6/S-8.3/SDR17.6 PN10/S-5/SDR11 PN16/S-3.2/SDR7.4 PP-R Copolymer Pipe PN10/S-5/SDR 11 Size Code Price/m 10 12 16 20 25 32 12 705 0032 17 2.30 40 12 705 0040 17 2.71 50 12 705 0050 17 4.26 63 12 705 0063 17 6.64 75 12 705 0075 17 9.44 90 12 705 0090 17 13.05 110 12 705 0110 17 20.21 125 12 705 0125 17 26.11 140 12 705 0140 17 32.18 160 12 705 0160 17 42.19 180 12 705 0180 17 52.22 200 12 705 0200 17 65.18 225 12 705 0225 17 82.27 250 12 705 0250 17 101.30 280 12 705 0280 17 137.25 315 12 705 0315 17 174.87 355 12 705 0355 17 233.13 400 12 705 0400 17 294.72 450 12 705 0450 17 438.38 500 12 705 0500 17 540.15 560 12 705 0560 17 678.07 630 12 705 0630 17 858.67 710 12 705 0710 17 1088.54 Code Price/m 12 705 0016 11 1.01 12 705 0020 11 1.82 12 705 0025 11 2.38 12 705 0032 11 3.37 12 705 0040 11 4.19 12 705 0050 11 6.51 12 705 0063 11 10.10 12 705 0075 11 14.05 12 705 0090 11 20.21 12 705 0110 11 28.23 12 705 0125 11 39.25 12 705 0140 11 49.26 12 705 0160 11 64.17 12 705 0180 11 81.27 12 705 0200 11 99.34 12 705 0225 11 126.41 12 705 0250 11 155.49 12 705 0280 11 212.63 12 705 0315 11 268.44 12 705 0355 11 357.92 Code Price/m 12 705 0012 07 1.02 12 705 0016 07 1.47 12 705 0020 07 1.90 12 705 0025 07 2.88 12 705 0032 07 4.77 12 705 0040 07 5.85 12 705 0050 07 9.03 12 705 0063 07 14.19 12 705 0075 07 20.21 12 705 0090 07 28.74 12 705 0110 07 43.02 12 705 0125 07 55.34 12 705 0140 07 69.62 12 705 0160 07 90.64 12 705 0225 07 171.59 Size Code Price/m 20 11 705 0020 11 25 11 705 0025 11 32 11 705 0032 11 40 11 705 0040 11 50 11 705 0050 11 63 11 705 0063 11 75 11 705 0075 11 90 11 705 0090 11 110 11 705 0110 11 125 11 705 0125 11 140 11 705 0140 11 160 11 705 0160 11 180 11 705 0180 11 200 11 705 0200 11 225 11 705 0225 11 250 11 705 0250 11 280 11 705 0280 11 315 11 705 0315 11 400 11 705 0400 11 450 11 705 0450 11 500 11 705 0500 11 710* 11 705 0710 17 800* 11 705 0800 17 *SDR 17 applicati Standard length 5m Please note that a transportati surcharge may be applied pipe diameters 250mm or larger - please enquire for details. i Polypropylene Material AGRU Polypropylene pipes and fittings are manufactured in accordance with DIN 8077/8078 using the following materials: Pipes: Nucleoid PP-H 100 (Beta ß-PP) Fittings: PP-R (polypropylene random copolymer) Nucleoid PP-H is chosen for pipes because of its exceptial impact strength at cold temperatures, good stress fracture and chemical resistance. PP-R (also optially available as pipe) provides high lg term creep strength at ctinuous high temperatures. Other types of Polypropylene are also available: Flame Retardent PPs (Polypropylene homo-polymer, flame-retardent) Due to its higher stiffness, PPs is ideally suited for ventilati pipes. The flame-retardent properties enhance the material for this applicati. Note that this material may not be used outdoors, as it is not UV stabilised. PPs-el (Polypropylene random copolymer flame-retardent, electro-cductive) This material combines the benefits of flame retardent properties and electro-cductivity. It can be used for safety reass in the transport of combustible material. High Purity PP Pure PP-R (High purity grade Polypropylene random copolymer) Selected and fully traceable raw materials are manufactured under strictly ctrolled cditis. This materials is ideal for less critical ultra-pure water applicatis (see High Purity Systems). Polypure PP-R: Natural (Polypropylene random copolymer, natural coloured) As natural PP-R ctains no colour additives, it is ideally suited for high purity water piping systems. Note that it is not UV stabilised (see High Purity Systems). 247

socket fusi fittings metric sizes Tee 90 Size Code Price 20 11 056 0020 07 3.03 25 11 056 0025 07 3.47 32 11 056 0032 07 4.01 40 11 056 0040 07 5.02 50 11 056 0050 07 8.38 63 11 056 0063 07 12.09 75 11 056 0075 07 29.89 90 11 056 0090 07 44.50 110 11 056 0110 07 55.34 Reducing Tee 90 25/20 11 055 2520 07 4.67 32/20 11 055 3220 07 5.74 32/25 11 055 3225 07 5.74 40/20 11 055 4020 07 6.51 40/25 11 055 4025 07 6.51 40/32 11 055 4032 07 6.51 50/20 11 055 5020 07 10.50 50/25 11 055 5025 07 10.50 50/32 11 055 5032 07 10.50 50/40 11 055 5040 07 10.50 63/25 11 055 6325 07 15.35 63/32 11 055 6332 07 15.35 63/40 11 055 6340 07 15.35 63/50 11 055 6350 07 15.35 Elbow 90 20 11 051 0020 07 2.63 25 11 051 0025 07 3.21 32 11 051 0032 07 3.87 40 11 051 0040 07 4.86 50 11 051 0050 07 8.96 63 11 051 0063 07 11.66 75 11 051 0075 07 24.63 90 11 051 0090 07 31.04 110 11 051 0110 07 44.99 Elbow 45 20 11 050 0020 07 3.37 25 11 050 0025 07 4.01 32 11 050 0032 07 4.61 40 11 050 0040 07 5.92 50 11 050 0050 07 8.13 63 11 050 0063 07 10.43 75 11 050 0075 07 22.98 90 11 050 0090 07 28.74 110 11 050 0110 07 45.98 Socket 20 11 053 0020 07 1.72 25 11 053 0025 07 1.82 32 11 053 0032 07 2.38 40 11 053 0040 07 3.03 50 11 053 0050 07 5.09 63 11 053 0063 07 8.31 75 11 053 0075 07 13.53 90 11 053 0090 07 17.07 110 11 053 0110 07 26.61 Reducer Spigot x Socket Size Code Price 25/20 11 057 2520 07 2.80 32/20 11 057 3220 07 3.47 32/25 11 057 3225 07 3.47 40/20 11 057 4020 07 4.12 40/25 11 057 4025 07 4.12 40/32 11 057 4032 07 4.12 50/20 11 057 5020 07 4.77 50/25 11 057 5025 07 4.77 50/32 11 057 5032 07 4.77 50/40 11 057 5040 07 4.77 63/25 11 057 6325 07 6.57 63/32 11 057 6332 07 6.57 63/40 11 057 6340 07 6.57 63/50 11 057 6350 07 6.57 75/63 11 057 7563 07 11.50 90/63 11 057 9063 07 16.01 90/75 11 057 9075 07 16.01 110/63 11 057 1163 07 21.85 110/90 11 057 1190 07 21.85 Female Adaptor BSP or NPT threaded 20 x 1 /2 11 034 2020 07 8.31 25 x 3 /4 11 034 2525 07 9.38 32 x 1 11 034 3232 07 12.22 40 x 1 1 /4 11 034 4040 07 13.97 50 x 1 1 /2 11 034 5050 07 22.01 63 x 2 11 034 6363 07 27.58 Code shown is for BSP. Code for NPT request. Male Adaptor BSP or NPT threaded 20 x 3 /4 11 035 2025 07 7.81 25 x 1 11 035 2532 07 9.77 32 x 1 1 /4 11 035 3240 07 11.75 40 x 1 1 /2 11 035 4050 07 19.38 50 x 2 11 035 5063 07 24.47 Code shown is for BSP Code for NPT request Cap 20 11 054 0020 07 2.88 25 11 054 0025 07 3.03 32 11 054 0032 07 3.37 40 11 054 0040 07 4.36 50 11 054 0050 07 5.59 63 11 054 0063 07 7.72 75 11 054 0075 07 12.48 90 11 054 0090 07 17.24 110 11 054 0110 07 22.98 Uni FPM O-Rings 20 11 024 1120 07 11.09 25 11 024 1125 07 12.09 32 11 024 1132 07 14.45 40 11 024 1140 07 20.55 50 11 024 1150 07 28.91 63 11 024 1163 07 39.41 248 i Pressure Ratings Maximum working pressures (socket fusi): All sizes PN10

socket fusi fittings Stub Flange DIN or ANSI standards 20 11 052 0020 07 2.15 25 11 052 0025 07 2.30 32 11 052 0032 07 2.55 40 11 052 0040 07 3.14 50 11 052 0050 07 3.70 63 11 052 0063 07 4.86 75 11 052 0075 07 10.67 90 11 052 0090 07 15.04 110 11 052 0110 07 21.20 Code shown is for DIN. ANSI code request. Blind Flange Polypropylene with steel core drilled to BS4504 NP10/16 - black 20 14 045 0020 11 52.54 25 14 045 0025 11 53.37 32 14 045 0032 11 54.69 40 14 045 0040 11 58.63 50 14 045 0050 11 66.34 63 14 045 0063 11 72.25 75 14 045 0075 11 84.55 90 14 045 0090 11 93.09 110 14 045 0110 11 127.07 Blind Flange Polypropylene with steel core drilled to ANSI 150 - grey 20 11 043 0020 11 65.68 25 11 043 0025 11 66.65 32 11 043 0032 11 68.29 40 11 043 0040 11 73.24 50 11 043 0050 11 82.92 63 11 043 0063 11 90.31 75 11 043 0075 11 103.12 90 11 043 0090 11 116.24 110 11 043 0110 11 158.94 Gasket EPDM 20 861-_-005 0.56 25 861-_-007 0.64 32 861-_-010 0.70 40 861-_-012 0.88 50 861-_-015 1.06 63 861-_-020 1.82 75 861-_-025 2.23 90 861-_-030 2.39 110 861-_-040 3.49 Complete code when ordering Insert ISO for NP10/16; A for ANSI 150; E for Table D/E Gasket FPM 20 862-_-005 2.58 25 862-_-007 3.83 32 862-_-010 5.06 40 862-_-012 8.12 50 862-_-015 8.87 63 862-_-020 11.69 75 862-_-025 16.92 90 862-_-030 22.06 110 862-_-040 37.64 Complete code when ordering Insert ISO for NP10/16; A for ANSI 150; E for Table D/E Backing Ring Table D/E Galvanised mild steel 20 860-005-11E 6.30 25 860-007-11E 7.13 32 860-010-11E 7.49 40 860-012-11E 7.72 50 860-015-11E 9.47 63 860-020-11E 13.43 75 860-025-11E 20.07 90 860-030-11E 20.40 110 D 860-040-11D 26.37 110 E 860-040-11E 26.37 Backing Ring NP10/16 Galvanised mild steel 20 860-005-11NP 7.13 25 860-007-11NP 7.55 32 860-010-11NP 8.97 40 860-012-11NP 9.52 50 860-015-11NP 10.45 63 860-020-11NP 14.76 75 860-025-11NP 20.21 90 860-030-11NP 23.37 110 860-040-11NP 29.89 Backing Ring ASA 150 Galvanised mild steel 20 860-005-11A 7.13 25 860-007-11A 7.55 32 860-010-11A 8.97 40 860-012-11A 9.52 50 860-015-11A 10.45 63 860-020-11A 14.76 75 860-025-11A 20.21 90 860-030-11A 23.37 110 860-040-11A 29.89 Backing Ring NP10 Polypropylene with steel core 20 11 014 0020 11 7.49 25 11 014 0025 11 8.22 32 11 014 0032 11 10.53 40 11 014 0040 11 13.36 50 11 014 0050 11 15.59 63 11 014 0063 11 18.08 75 11 014 0075 11 20.07 90 11 014 0090 11 23.71 110 11 014 0110 11 28.19 Backing Ring ASA 150 Polypropylene with steel core 20 11 013 0020 11 7.49 25 11 013 0025 11 8.22 32 11 013 0032 11 10.53 40 11 013 0040 11 13.36 50 11 013 0050 11 15.59 63 11 013 0063 11 18.08 75 11 013 0075 11 20.07 90 11 013 0090 11 23.71 110 11 013 0110 11 28.19 249

fusi spigot fittings metric sizes Tee 90 PN3.2 PN6 PN10 Size Code Price Code Price Code Price 20 25 32 40 50 63 75 90 110 11 006 0110 33 31.52 125 11 006 0125 33 38.43 140 11 006 0140 33 42.85 160 11 006 0160 33 71.59 180 11 006 0180 33 84.71 200 11 006 0200 33 104.59 225 11 006 0225 33 196.20 250 11 006 0250 33 303.72 280 11 006 0280 33 385.82 315 11 006 0315 33 487.60 355 11 006 0355 33 682.19 400 11 006 0400 33 999.87 450 11 006 0450 33 1351.22 500 11 006 0500 33 1753.46 11 006 0063 17 9.77 11 006 0075 17 20.03 11 006 0090 17 28.56 11 006 0110 17 47.28 11 006 0125 17 65.51 11 006 0140 17 77.19 11 006 0160 17 145.13 11 006 0180 17 178.95 11 006 0200 17 243.82 11 006 0225 17 285.69 11 006 0250 17 379.27 11 006 0280 17 428.51 11 006 0315 17 570.53 11 006 0355 17 857.06 11 006 0400 17 1172.26 11 006 0450 17 1531.81 11 006 0500 17 2004.60 11 006 0020 11 2.71 11 006 0025 11 2.71 11 006 0032 11 3.47 11 006 0040 11 5.42 11 006 0050 11 7.28 11 006 0063 11 11.33 11 006 0075 11 22.81 11 006 0090 11 34.00 11 006 0110 11 50.07 11 006 0125 11 68.80 11 006 0140 11 84.41 11 006 0160 11 146.62 11 006 0180 11 188.00 11 006 0200 11 269.26 11 006 0225 11 320.16 11 006 0250 11 452.32 11 006 0280 11 611.60 11 006 0315 11 870.16 11 006 0355 11 1016.27 11 006 0400 11 1517.05 11 006 0450 11 2003.01 11 006 0500 11 2559.61 Tee 90 Elgated 20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 PN3.2 PN6 PN10 11 066 0020 11 5.92 11 066 0025 11 6.75 11 066 0032 11 8.07 11 066 0040 11 9.93 11 066 0050 11 13.15 11 066 0063 11 18.07 11 066 0075 11 30.04 11 066 0090 11 42.69 11 066 0110 11 62.39 11 066 0125 11 85.71 11 066 0140 11 137.58 11 066 0160 11 178.95 11 066 0180 11 234.79 11 066 0200 11 335.76 11 066 0225 11 398.95 11 066 0250 11 515.54 11 066 0280 11 772.47 11 066 0315 11 990.02 Pipe Availability We typically hold over 195,000 metres of pipe in stock for immediate despatch 250

fusi spigot fittings Reducing Tee 90 Size Code Price Code Price Code Price 11 016 9032 11 35.12 11 016 9050 11 36.13 11 016 1132 11 51.72 11 016 1150 11 52.88 11 016 1263 11 73.87 90/32 90/50 110/32 110/50 125/63 125/90 140/63 140/75 140/90 140/110 160/125 180/63 180/75 180/110 180/125 225/125 PN3.2 PN6 11 016 1463 17 72.09 11 016 1475 17 72.25 11 016 1490 17 73.38 11 016 1411 17 74.87 11 016 1612 17 139.73 11 016 1863 17 159.43 11 016 1875 17 165.82 11 016 1811 17 148.75 11 016 1812 17 171.59 11 016 2212 17 271.72 PN10 11 016 1463 11 92.59 11 016 1475 11 92.59 11 016 1490 11 94.09 11 016 1411 11 94.09 11 016 1612 11 156.15 11 016 1863 11 194.57 11 016 1875 11 194.57 11 016 1812 11 200.33 11 016 2212 11 337.41 Reducing Tee 90 Elgated 63/50 75/32 75/50 75/63 90/63 90/75 110/63 110/75 110/90 125/90 125/110 160/63 160/75 160/90 160/110 180/90 180/160 200/63 200/90 200/110 200/125 200/160 225/75 225/90 225/110 225/160 225/180 315/90 315/110 315/160 315/200 315/225 315/250 PN3.2 PN6 11 065 6350 17 17.58 11 065 7550 17 26.45 11 065 7563 17 26.93 11 065 9063 17 37.61 11 065 9075 17 37.93 11 065 1163 17 55.82 11 065 1175 17 55.82 11 065 1190 17 57.14 11 065 1211 17 77.49 11 065 1663 17 153.34 11 065 1675 17 158.12 11 065 1690 17 158.12 11 065 1611 17 159.58 11 065 1890 17 213.44 11 065 1816 17 213.44 11 065 2063 17 286.50 11 065 2090 17 286.50 11 065 2011 17 286.50 11 065 2012 17 286.50 11 065 2016 17 286.50 11 065 2275 17 360.39 11 065 2290 17 360.39 11 065 2211 17 361.20 11 065 2216 17 362.03 11 065 2218 17 363.67 11 065 3111 17 1001.53 11 065 3116 17 1001.53 11 065 3122 17 1047.50 11 065 3125 17 1047.50 PN10 11 065 6350 11 18.88 11 065 7532 11 29.55 11 065 7550 11 29.55 11 065 7563 11 30.21 11 065 9063 11 42.03 11 065 9075 11 42.36 11 065 1163 11 62.39 11 065 1175 11 62.39 11 065 1190 11 63.22 11 065 1290 11 86.68 11 065 1211 11 86.68 11 065 1663 11 170.74 11 065 1675 11 172.39 11 065 1690 11 172.39 11 065 1611 11 176.52 11 065 1890 11 236.41 11 065 1816 11 236.41 11 065 2063 11 311.14 11 065 2090 11 311.14 11 065 2011 11 311.14 11 065 2012 11 311.14 11 065 2016 11 311.14 11 065 2275 11 399.79 11 065 2290 11 399.79 11 065 2211 11 401.46 11 065 2216 11 403.08 11 065 2218 11 403.90 11 065 3111 11 1088.54 11 065 3116 11 1088.54 11 065 3122 11 1137.77 11 065 3125 11 1137.77 Free Training We can provide free installer training either site or at our bespoke training facility. Ctact Ty Charlt or Tom Tate : 0800 975 79 71 251

fusi spigot fittings Bend 90 Please note: Withdrawn, residual stocks ly PN3.2 PN6 PN10 Size Code Price Code Price Code Price 110 11 001 0110 33 23.98 125 11 001 0125 33 27.10 140 11 001 0140 33 34.99 160 11 001 0160 33 45.65 180 11 001 0180 33 55.66 200 11 001 0200 33 68.95 225 11 001 0225 33 84.89 250 11 001 0250 33 104.25 280 11 001 0280 33 128.90 315 11 001 0315 33 183.07 355 11 001 0355 33 489.27 400 11 001 0400 33 683.82 450 11 001 0450 33 921.06 500 11 001 0500 33 1283.92 11 001 0250 17 227.39 11 001 0280 17 295.52 11 001 0315 17 408.01 11 001 0355 17 646.89 11 001 0400 17 901.35 11 001 0450 17 1177.18 11 001 0500 17 1485.86 11 001 0250 11 334.12 11 001 0280 11 435.08 11 001 0315 11 600.10 11 001 0355 11 878.39 11 001 0400 11 1205.11 11 001 0450 11 1581.07 11 001 0500 11 2039.14 Multi-Bend 90 PN3.2 PN6 PN10 Elgated 20 25 32 40 50 11 068 0020 11 11 068 0025 11 11 068 0032 11 11 068 0040 11 11 068 0050 11 4.10 4.23 4.40 5.71 7.18 63 11 068 0063 17 9.47 11 068 0063 11 10.26 75 11 068 0075 17 13.86 11 068 0075 11 14.16 90 11 068 0090 17 18.08 11 068 0090 11 20.56 110 11 068 0110 17 38.10 11 068 0110 11 39.10 125 11 068 0125 17 48.42 11 068 0125 11 55.10 140 11 068 0140 17 70.33 11 068 0140 11 73.67 160 11 068 0160 17 77.56 11 068 0160 11 89.75 180 11 068 0180 17 95.92 11 068 0180 11 106.29 200 225 11 068 0200 17 118.80 11 068 0225 17 146.41 11 068 0200 11 11 068 0225 11 158.37 188.88 Elbow 90 Elgated PN3.2 PN6 PN10 Size Code Price Code Price Code Price 250 280 315 11 061 0250 11 380.94 11 061 0280 11 570.53 11 061 0315 11 713.37 Fast Delivery We deliver using our own dedicated vehicles or next day carrier. Using our standard delivery service you can expect to receive your order within 24 hours - to your warehouse, factory or job-site 252

fusi spigot fittings Elbow 45 Elgated 20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 PN3.2 PN6 11 060 0063 17 17.72 11 060 0075 17 21.85 11 060 0090 17 27.58 11 060 0110 17 52.72 11 060 0125 17 65.02 11 060 0140 17 82.75 11 060 0160 17 98.52 11 060 0180 17 107.56 11 060 0200 17 147.09 11 060 0225 17 175.68 11 060 0250 17 339.06 11 060 0280 17 513.09 11 060 0315 17 638.66 PN10 11 060 0020 11 5.92 11 060 0025 11 6.33 11 060 0032 11 7.63 11 060 0040 11 9.51 11 060 0050 11 10.75 11 060 0063 11 19.71 11 060 0075 11 24.47 11 060 0090 11 30.56 11 060 0110 11 58.63 11 060 0125 11 72.41 11 060 0140 11 91.94 11 060 0160 11 109.35 11 060 0180 11 119.70 11 060 0200 11 163.53 11 060 0225 11 195.37 11 060 0250 11 377.63 11 060 0280 11 570.53 11 060 0315 11 713.37 i Pipe Supports Pipe supports should be free of sharp edges which can damage a pipe wall. Care should also be taken to ensure that supports allow for expansi and ctracti of the pipe without restraint. Polypropylene pipework requires more support than for metallic systems. As working temperature increases, the distance between supports is reduced. PN10 Support Centres/m Pipe Size 20 C 60 C 100 C 16 0.75 0.65 0.40 20 0.80 0.65 0.45 25 0.85 0.75 0.50 32 1.00 0.85 0.55 40 1.10 0.95 0.60 50 1.25 1.05 0.70 63 1.40 1.20 0.80 75 1.55 1.30 0.85 90 1.65 1.45 0.95 110 1.85 1.60 1.05 125 2.00 1.70 1.10 140 2.10 1.80 1.15 160 2.25 1.90 1.25 180 2.40 2.00 1.30 200 2.50 2.15 1.35 225 2.65 2.30 1.45 250 2.75 2.35 1.50 280 2.90 2.45 1.60 315 3.05 2.60 1.65 355 3.20 2.70 1.75 400 3.40 2.90 1.85 450 3.70 3.15 2.00 500 3.85 3.25 2.05 560 4.10 3.50 2.25 630 4.35 3.70 2.40 253

fusi spigot fittings Reducer Ccentric PN3.2 Size Code Price 25 x 20 32 x 20 32 x 25 40 x 20 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 63 x 32 63 x 40 63 x 50 75 x 32 75 x 40 75 x 50 75 x 63 90 x 50 90 x 63 90 x 75 110 x 50 110 x 63 110 x 75 110 x 90 125 x 63 125 x 75 125 x 90 125 x 110 140 x 75 140 x 90 140 x 110 140 x 125 160 x 90 160 x 110 160 x 125 160 x 140 180 x 90 180 x 110 180 x 125 180 x 140 180 x 160 200 x 140 200 x 160 200 x 180 225 x 140 225 x 160 225 x 180 225 x 200 250 x 160 250 x 180 250 x 200 250 x 225 280 x 200 280 x 225 280 x 250 315 x 200 315 x 225 315 x 250 315 x 280 PN6 Code Price 11 009 7563 17 12.48 11 009 9063 17 13.97 11 009 9075 17 13.97 11 009 1163 17 17.72 11 009 1175 17 17.72 11 009 1190 17 17.72 11 009 1263 17 22.81 11 009 1275 17 22.81 11 009 1290 17 22.81 11 009 1211 17 22.81 11 009 1475 17 27.58 11 009 1490 17 27.58 11 009 1411 17 27.58 11 009 1412 17 27.58 11 009 1690 17 32.18 11 009 1611 17 32.18 11 009 1612 17 32.18 11 009 1614 17 32.18 11 009 1890 17 50.57 11 009 1811 17 47.62 11 009 1812 17 43.84 11 009 1814 17 41.70 11 009 1816 17 39.73 11 009 2014 17 113.95 11 009 2016 17 100.64 11 009 2018 17 89.97 11 009 2214 17 135.95 11 009 2216 17 116.73 11 009 2218 17 111.15 11 009 2220 17 97.86 11 009 2516 17 155.82 11 009 2518 17 144.15 11 009 2521 17 132.51 11 009 2522 17 125.76 11 009 2820 17 174.04 11 009 2822 17 161.72 11 009 2825 17 157.47 11 009 3120 17 221.66 11 009 3122 17 196.20 11 009 3125 17 178.95 11 009 3128 17 167.48 PN10 Code Price 11 009 2520 11 6.97 11 009 3220 11 8.07 11 009 3225 11 8.07 11 009 4020 11 9.20 11 009 4025 11 9.20 11 009 4032 11 9.20 11 009 5025 11 9.70 11 009 5032 11 9.70 11 009 5040 11 9.70 11 009 6332 11 11.75 11 009 6340 11 11.75 11 009 6350 11 11.75 11 009 7532 11 15.04 11 009 7540 11 15.04 11 009 7550 11 15.04 11 009 7563 11 15.04 11 009 9050 11 16.76 11 009 9063 11 16.76 11 009 9075 11 16.76 11 009 1150 11 21.35 11 009 1163 11 21.35 11 009 1175 11 21.35 11 009 1190 11 21.35 11 009 1263 11 27.43 11 009 1275 11 27.43 11 009 1290 11 27.43 11 009 1211 11 27.43 11 009 1475 11 33.17 11 009 1490 11 33.17 11 009 1411 11 33.17 11 009 1412 11 31.70 11 009 1690 11 38.92 11 009 1611 11 38.92 11 009 1612 11 38.92 11 009 1614 11 38.92 11 009 1890 11 60.91 11 009 1811 11 57.48 11 009 1812 11 52.88 11 009 1814 11 50.25 11 009 1816 11 47.93 11 009 2014 11 137.25 11 009 2016 11 121.50 11 009 2018 11 108.71 11 009 2214 11 163.84 11 009 2216 11 140.71 11 009 2218 11 133.98 11 009 2220 11 118.08 11 009 2516 11 188.00 11 009 2518 11 174.04 11 009 2521 11 159.92 11 009 2522 11 151.55 11 009 2820 11 209.33 11 009 2822 11 195.37 11 009 2825 11 188.00 11 009 3120 11 267.62 11 009 3122 11 236.41 11 009 3125 11 215.07 11 009 3128 11 201.95 Reducer Ccentric PN3.2 Size Code Price 63 x 16 75 x 32 110 x 63 11 007 1163 33 13.64 125 x 75 11 007 1275 33 15.60 160 x 110 11 007 1611 33 49.42 225 x 160 11 007 2216 33 124.95 315 x 225 11 007 3122 33 144.15 450 x 315 11 007 4531 33 492.54 630 x 450 11 007 6345 33 610.75 PN6 Code Price 11 007 7532 17 10.50 11 007 1163 17 14.37 11 007 1275 17 16.34 11 007 1611 17 53.19 11 007 2216 17 140.40 11 007 3122 17 159.11 11 007 4531 17 545.93 11 007 6345 17 824.20 PN10 Code Price 11 007 6316 11 7.15 11 007 7532 11 11.42 11 007 1163 11 15.17 11 007 1275 11 17.07 11 007 1611 11 56.97 11 007 2216 11 154.51 11 007 3122 11 170.74 11 007 4531 11 606.66 254

fusi spigot fittings Reducer Ccentric - elgated PN3.2 Size Code Price 25 x 20 32 x 20 32 x 25 40 x 20 40 x 25 40 x 32 50 x 25 50 x 32 50 x 40 63 x 32 63 x 40 63 x 50 75 x 50 75 x 63 90 x 63 90 x 75 110 x 63 110 x 90 125 x 63 125 x 90 125 x 110 140 x 125 160 x 90 160 x 110 160 x 125 160 x 140 180 x 125 180 x 160 200 x 160 225 x 160 250 x 160 250 x 200 250 x 225 280 x 250 315 x 200 315 x 225 315 x 250 PN6 PN10 Code Price Code Price 11 067 2520 11 3.95 11 067 3220 11 4.36 11 067 3225 11 4.36 11 067 4020 11 6.33 11 067 4025 11 6.33 11 067 4032 11 6.33 11 067 5025 11 7.81 11 067 5032 11 7.81 11 067 5040 11 7.81 11 067 6332 11 10.35 11 067 6340 11 10.35 11 067 6350 11 10.35 11 067 7550 11 16.01 11 067 7563 11 16.01 11 067 9063 11 22.51 11 067 9075 11 22.65 11 067 1163 11 35.77 11 067 1190 11 35.77 11 067 1263 11 36.30 11 067 1290 11 36.30 11 067 1211 11 36.30 11 067 1412 11 52.05 11 067 1690 11 69.62 11 067 1611 11 69.79 11 067 1612 11 69.79 11 067 1614 11 70.11 11 067 1812 11 90.31 11 067 1816 11 90.31 11 067 2016 11 99.02 11 067 2216 11 159.26 11 067 2516 11 215.91 11 067 2521 11 225.76 11 067 2522 11 225.76 11 067 2825 11 300.46 11 067 3120 11 386.65 11 067 3122 11 386.65 11 067 3125 11 386.65 Reducer Eccentric - elgated PN3.2 Size Code Price 25 x 20 32 x 25 40 x 25 40 x 32 50 x 32 50 x 40 63 x 32 63 x 40 63 x 50 75 x 50 75 x 63 90 x 63 90 x 75 110 x 63 110 x 90 125 x 63 125 x 90 125 x 110 140 x 125 160 x 90 160 x 110 160 x 125 160 x 140 180 x 90 180 x 125 180 x 160 200 x 160 200 x 180 225 x 160 225 x 180 225 x 200 250 x 200 250 x 225 PN6 Code Price PN10 Code Price 11 069 2520 11 4.36 11 069 3225 11 5.02 11 069 4025 11 6.90 11 069 4032 11 6.90 11 069 5032 11 8.54 11 069 5040 11 8.54 11 069 6332 11 12.32 11 069 6340 11 12.32 11 069 6350 11 12.32 11 069 7550 11 19.05 11 069 7563 11 19.05 11 069 9063 11 26.61 11 069 9075 11 26.61 11 069 1163 11 35.77 11 069 1190 11 35.77 11 069 1263 11 43.02 11 069 1290 11 43.02 11 069 1211 11 43.02 11 069 1412 11 61.91 11 069 1690 11 82.58 11 069 1611 11 82.58 11 069 1612 11 82.58 11 069 1614 11 82.58 11 069 1890 11 107.37 11 069 1812 11 107.37 11 069 1816 11 107.37 11 069 2016 11 117.57 11 069 2018 11 117.57 11 069 2216 11 189.64 11 069 2218 11 189.64 11 069 2220 11 189.64 11 069 2521 11 269.26 11 069 2522 11 248.73 255

fusi spigot fittings Cap Elgated Cap Short PN3.2 PN6 Size Code Price Code Price 20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 PN3.2 PN6 Size Code Price Code Price 355 400 450 500 PN10 Code Price 11 064 0020 11 4.50 11 064 0025 11 5.02 11 064 0032 11 6.33 11 064 0040 11 7.81 11 064 0050 11 10.19 11 064 0063 11 13.39 11 064 0075 11 20.86 11 064 0090 11 31.52 11 064 0110 11 42.69 11 064 0125 11 46.15 11 064 0140 11 57.62 11 064 0160 11 64.52 11 064 0180 11 83.91 11 064 0200 11 104.59 11 064 0225 11 124.78 11 064 0250 11 187.18 11 064 0280 11 265.98 11 064 0315 11 357.13 PN10 Code Price 11 004 0355 11 371.07 11 004 0400 11 508.16 11 004 0450 11 705.17 11 004 0500 11 884.94 Uni FPM seals Size Code Price 20 25 32 40 50 63 PN10 Code Price 11 024 0120 11 18.38 11 024 0125 11 20.03 11 024 0132 11 24.12 11 024 0140 11 34.00 11 024 0150 11 48.10 11 024 0163 11 65.51 Male Adaptor BSP or NPT male thread Size Code Price 20 x 1 /2 25 x 3 /4 32 x 1 40 x 1 1 /4 50 x 1 1 /2 63 x 2 PN10-BSP PN10-NPT Code Price Code Price 11 033 2020 11 6.51 11 033 2021 11 6.51 11 033 2525 11 7.81 11 033 2526 11 7.81 11 033 3232 11 9.77 11 033 3233 11 9.77 11 033 4040 11 11.75 11 033 4041 11 11.75 11 033 5050 11 19.38 11 033 5051 11 19.38 11 033 6363 11 24.47 11 033 6364 11 24.47 Female Adaptor BSP or NPT female thread Size Code Price 20 x 1 /2 25 x 3 /4 32 x 1 40 x 1 1 /4 50 x 1 1 /2 63 x 2 PN10-BSP PN10-NPT Code Price Code Price 11 032 2020 11 8.31 11 032 2021 11 8.31 11 032 2525 11 9.38 11 032 2526 11 9.38 11 032 3232 11 12.22 11 032 3233 11 12.22 11 032 4040 11 13.97 11 032 4041 11 13.97 11 032 5050 11 22.01 11 032 5051 11 22.01 11 032 6363 11 27.58 11 032 6364 11 27.58 PTFE Tape BS7786 Roll Size: 12m x 12mm x 0.075mm Order Code: 767-120 Price: 0.96 256

fusi spigot flanges Stub Flange DIN 16962 Short Spigot 20 25 32 40 50 63 75 90 110 11 012 0110 33 14.52 125 11 012 0125 33 17.89 140 11 012 0140 33 20.70 160 11 012 0160 33 25.60 180 11 012 0180 33 37.43 200 11 012 0200 33 44.99 225 11 012 0225 33 50.40 250 11 012 0250 33 71.09 280 11 012 0280 33 76.68 315 11 012 0315 33 91.94 355 11 012 0355 33 157.12 Also available to JIS standards. Please enquire for details. *Machined. PN3.2 PN6 PN10 Size Code Price Code Price Code Price 400 11 012 0400 33 326.74 450 11 012 0450 33 382.54 500 11 012 0500 33 464.64 560 11 012 0560 33 549.21 630 11 012 0630 33 632.93 11 012 0063 17 6.42 11 012 0075 17 7.56 11 012 0090 17 10.99 11 012 0110 17 14.52 11 012 0125 17 17.89 11 012 0140 17 20.70 11 012 0160 17 25.60 11 012 0180 17 37.43 11 012 0200 17 46.81 11 012 0225 17 52.38 11 012 0250 17 74.87 11 012 0280 17 82.27 11 012 0315 17 100.47 11 012 0355 17 172.39 11 012 0400 17 348.08 11 012 0450 17 410.48 11 012 0500 17 505.68 11 012 0560 17 605.02 11 012 0630 17 701.05 11 012 0020 11 3.47 11 012 0025 11 3.47 11 012 0032 11 4.01 11 012 0040 11 4.86 11 012 0050 11 5.92 11 012 0063 11 7.41 11 012 0075 11 8.73 11 012 0090 11 12.48 11 012 0110 11 16.09 11 012 0125 11 19.38 11 012 0140 11 22.65 11 012 0160 11 28.56 11 012 0180 11 44.16 11 012 0200 11 48.76 11 012 0225 11 54.20 11 012 0250 11 82.27 11 012 0280 11 89.97 11 012 0315 11 105.92 11 012 0355 11 188.00 11 012 0400 11 370.24 11 012 0450 11 434.28 11 012 0500 11 549.21 Stub Flange ANSI Short Spigot 20 25 32 40 50 63 75 90 110 125 140 160 180 Also available to JIS standards. Please enquire for details. *Machined. PN3.2 PN6 PN10 Size Code Price Code Price Code Price 200 225 250 280 315 11 012 1020 11 11 012 1025 11 11 012 1032 11 11 012 1040 11 11 012 1050 11 11 012 1063 11 11 012 1075 11 11 012 1090 11 11 012 1110 11 11 012 1125 11 11 012 1140 11 11 012 1160 11 11 012 1180 11 11 012 1200 11 11 012 1225 11 11 012 1250 11 11 012 1280 11 11 012 1315 11 applicati Stub Flange Elgated Also available to ANSI or JIS standards. Please enquire for details. PN3.2 PN6 PN10 Size Code Price Code Price Code Price 20 11 062 0020 11 4.77 25 11 062 0025 11 5.02 32 11 062 0032 11 5.85 40 11 062 0040 11 6.90 50 11 062 0050 11 8.45 63 11 062 0063 11 10.59 75 11 062 0075 11 13.70 90 11 062 0090 11 17.89 110 11 062 0110 11 22.81 125 11 062 0125 11 27.76 140 11 062 0140 11 35.77 160 11 062 0160 11 40.89 180 11 062 0180 11 63.05 200 11 062 0200 11 71.91 225 11 062 0225 11 77.49 250 11 062 0250 11 119.05 280 11 062 0280 11 180.61 315 11 062 0315 11 229.05 257

fusi spigot flanges Stub Flange Chamfered Suitable for use with butterfly valves PN3.2 PN6 PN10 Size Code Price Code Price Code Price 110 11 012 9110 11 20.03 140 11 012 9140 11 28.25 160 11 012 9160 11 35.66 180 11 012 9180 11 55.34 200 11 012 9200 11 60.91 225 11 012 9225 11 67.82 250 11 012 9250 11 102.95 280 11 012 9280 11 112.48 315 11 012 9315 11 132.32 Blind Flange Polypropylene with steel insert - black Also available to ANSI or JIS standards. Please enquire for details. PN10 Size Code Price Code Price Code Price 20 14 045 0020 11 52.54 25 14 045 0025 11 53.37 32 14 045 0032 11 54.69 40 14 045 0040 11 58.63 50 14 045 0050 11 66.34 63 14 045 0063 11 72.25 75 14 045 0075 11 84.55 90 14 045 0090 11 93.09 110 125 140 160 180 200 225 250 280 315 355 400 14 045 0110 11 127.07 14 045 0125 11 127.07 14 045 0140 11 156.15 14 045 0160 11 197.00 14 045 0180 11 197.00 14 045 0200 11 219.20 14 045 0225 11 219.20 14 045 0250 11 286.50 14 045 0280 11 286.50 14 045 0315 11 417.84 14 045 0355 11 816.00 14 045 0400 11 932.56 AutoCad Software AGRU CAD software is developed to run under AutoCad R12-DOS, R13-Windows, R14-Windows and Windows 2000 It is specifically produced to design plastic piping systems. There are several unique features:- - Drawing centre lines (products centred automatically) - Parts list generati - Prefab parts list (pipe cutting lengths are shown) - Automatic calculati of expansi loops AGRU CAD ctains the full AGRU range in PP, PVDF and ECTFE. 258

fusi spigot flanges Stub Gasket Backing Ring Polypropylene with steel EPDM FPM Size Code Price Code Price 20 861-_-005 0.56 862-_-005 2.58 25 861-_-007 0.64 862-_-007 3.83 32 861-_-010 0.70 862-_-010 5.06 40 861-_-012 0.88 862-_-012 8.12 50 861-_-015 1.06 862-_-015 8.87 63 861-_-020 1.82 862-_-020 11.69 75 861-_-075 2.23 862-_-075 16.24 90 861-_-031 2.39 862-_-031 22.06 110 861-_-041 3.49 862-_-041 37.64 125 861-_-040 3.49 862-_-040 37.64 140 861-_-051 4.48 862-_-051 62.82 160 861-_-061 5.13 862-_-061 62.82 180 861-_-180 10.20 862-_-180 75.23 200 861-_-080 10.20 862-_-080 75.23 225 861-_-082 10.20 862-_-082 75.23 250 861-_-100 12.51 862-_-100 102.41 280 861-_-101 12.51 862-_-101 102.41 315 861-_-121 14.18 862-_-121 106.91 355 861-_-141 19.99 862-_-141 166.79 400 861-_-161 22.03 862-_-161 192.12 Complete code when ordering Insert ISO for NP10/16; A for ANSI 150; E for Table D/E NP 10 NP 10 PN 16 core Size Code Price Code Price Code Price 20 14 014 0020 11* 7.49 11 014 0020 11 7.49-25 14 014 0025 11* 8.22 11 014 0025 11 8.22-32 14 014 0032 11* 10.53 11 014 0032 11 10.53-40 14 014 0040 11* 13.36 11 014 0040 11 13.36-50 14 014 0050 11* 15.59 11 014 0050 11 15.59-63 14 014 0063 11* 18.08 11 014 0063 11 18.08-75 14 014 0075 11* 20.07 11 014 0075 11 20.07-90 14 014 0090 11* 23.71 11 014 0090 11 23.71-110 14 014 0110 11* 28.19 11 014 0110 11 28.19-125 14 014 0125 11* 28.19 11 014 0125 11 28.19 - Also available in ANSI 140 14 014 0140 11* 43.42 11 014 0140 11 43.42-150, please enquire for 160 14 014 0160 11* 49.71 11 014 0160 11 49.71 - details 180 14 014 0180 11* 49.71 11 014 0180 11 49.71-200 14 014 0200 11* 70.78 11 014 0200 11 70.78 14 014 1200 11 109.39 225 14 014 0225 11* 70.78 11 014 0225 11 70.78 14 014 1225 11 109.36 250 14 014 0250 11* 113.03 11 014 0250 11 113.03 14 014 1250 11 160.27 280 14 014 0280 11* 113.03 11 014 0280 11 113.03 14 014 1280 11 160.27 315 14 014 0315 11* 142.03 11 014 0315 11 142.03 14 014 1315 11 203.16 355 14 014 0355 11* 299.16 11 014 0355 11 299.16 14 014 1355 11 369.78 400 14 014 0400 11* 338.92 11 014 0400 11 338.92 14 014 1400 11 408.67 450 14 014 0450 11* 419.31 11 014 0450 11 419.31-500 14 014 0500 11* 419.31 11 014 0500 11 419.31-560 14 014 0560 11* 568.46-630 14 014 0630 11* 568.46 - Backing Ring Galvanised Mild Steel *Black NP10 ANSI 150 Size Code Price 20 860-005-12NP 7.13 25 860-007-12NP 7.55 32 860-010-12NP 9.22 40 860-012-12NP 9.79 50 860-015-12NP 10.45 63 860-020-11NP 14.76 75 860-025-11NP 20.21 90 860-030-11NP 23.37 110 860-040-11NP 29.89 125 860-125-11NP 41.62 140 860-050-12NP 41.62 160 860-060-14NP 46.58 180 860-180-11NP 54.69 200 860-080-11N 66.73 225 860-225-12N 65.48 250 860-100-13N 97.07 280 860-280-11N 92.65 315 860-120-15N 125.95 355 860-140-12N 351.26 400 860-160-12N 431.14 Code Price 860-005-12A 7.13 860-007-12A 7.55 860-010-12A 8.97 860-012-12A 9.52 860-015-12A 10.45 860-020-11A 14.76 860-025-11A 20.21 860-030-11A 23.37 860-040-11A 29.89 860-125-11A 41.62 860-050-12A 41.62 860-060-14A 46.58 860-180-11A 54.69 860-080-11A 66.73 860-225-12A 65.48 860-100-13A 92.65 860-280-11A 92.65 860-120-15A 125.95 860-140-12A 351.26 860-160-12A 431.14 259

pp flame retardent pipe and fittings Pipe PPs Flame retardent grade Ventilati PN3.2/S-16/SDR33 PN10/S-5/SDR11 Size Wall Code Price/m 20-25 - 32-40 - 50 3.0 17 705 0050 00 63 3.0 17 705 0063 00 75 3.0 17 705 0075 00 90 3.0 17 705 0090 00 110 3.0 17 705 0110 00 125 3.0 17 705 0125 00 applicati applicati applicati applicati applicati applicati 140 3.0 17 705 0140 00 20.01 160 3.0 17 705 0160 00 23.21 180 3.0 17 705 0180 00 25.95 200 3.0 17 705 0200 00 28.81 225 3.5 17 705 0225 00 37.44 250 3.5 17 705 0250 00 41.70 280 4.0 17 705 0280 00 52.77 315 5.0 17 705 0315 00 74.47 355 5.0 17 705 0355 00 84.00 400 6.0 17 705 0400 00 112.06 450 6.0 17 705 0450 00 131.78 500 8.0 17 705 0500 00 194.58 560 8.0 17 705 0560 00 218.31 630 10.0 17 705 0630 00 305.31 710 12.0 17 705 0710 00 411.30 800 12.0 17 705 0800 00 463.50 900 15.0 17 705 0900 00 707.67 1000 15.0 17 705 1000 00 788.41 1200 18.0 17 705 1200 00 1308.84 Code Price/m 17 705 0063 33 5.17 Code Price/m 17 705 0020 11 2.03 17 705 0025 11 2.74 17 705 0032 11 3.91 17 705 0040 11 5.55 17 705 0050 11 8.62 17 705 0063 11 13.66 17 705 0075 11 19.10 17 705 0090 11 27.59 17 705 0110 11 41.00 17 705 0140 11 66.20 17 705 0160 11 86.92 Standard length 5m Please note that a transportati surcharge may be applied pipe diameters 250mm or larger - please enquire for details. Tee 90º PN2.5 PN3.2 PN10 Size Code Price 20 25 32 40 50 63 75 90 110 140 160 180 200 225 250 280 315 Code Price 17 006 0110 33 37.91 17 006 0160 33 86.36 17 006 0180 33 115.64 17 006 0200 33 126.35 17 006 0225 33 236.76 17 006 0250 33 366.15 17 006 0280 33 466.18 17 006 0315 33 589.77 Code Price 17 006 0020 11 3.66 17 006 0025 11 3.66 17 006 0032 11 4.57 17 006 0040 11 7.23 17 006 0050 11 9.75 17 006 0063 11 15.14 17 006 0075 11 30.56 17 006 0090 11 45.60 17 006 0110 11 67.00 17 006 0140 11 116.87 17 006 0160 11 196.61 260

pp flame retardent Bend 90º PN2.5 PN3.2 PN10 Size Code Price 20 25 32 40 50 63 75 90 110 140 160 180 200 225 250 280 315 355 400 Code Price 17 001 0110 33 28.96 17 001 0160 33 55.05 17 001 0180 33 67.06 17 001 0200 33 83.18 17 001 0225 33 102.39 17 001 0250 33 125.80 17 001 0280 33 155.62 17 001 0315 33 220.68 17 001 0355 33 589.95 17 001 0400 33 827.34 Code Price 17 001 0020 11 4.54 17 001 0032 11 4.89 17 001 0040 11 6.34 17 001 0050 11 7.95 17 001 0063 11 11.40 17 001 0075 11 15.70 17 001 0090 11 22.79 17 001 0110 11 43.39 17 001 0140 11 81.74 17 001 0160 11 99.57 Reducer Ccentric PN2.5 PN3.2 PN10 Size Code Price 63x16 75x32 110x63 125x75 160x110 225x160 315x225 Code Price 17 007 1163 33 16.46 17 007 1275 33 18.81 17 007 1611 33 59.62 17 007 2216 33 151.19 17 007 3122 33 173.96 Code Price 17 007 6316 11 8.62 17 007 7532 11 13.82 17 007 1163 11 18.30 17 007 1275 11 20.66 17 007 1611 11 68.80 Stub Flange PN2.5 PN3.2 PN10 Size Code Price 20 25 32 40 50 63 75 90 110 125 140 160 180 200 225 250 280 315 355 400 500 Code Price 17 012 0110 33 17.57 17 012 0160 33 30.91 17 012 0180 33 45.17 17 012 0200 33 53.20 17 012 0225 33 60.84 17 012 0250 33 78.05 17 012 0280 33 92.56 17 012 0315 33 110.89 17 012 0355 33 189.70 17 012 0400 33 395.07 17 012 0500 33 561.87 Code Price 17 012 0020 11 4.14 17 012 0025 11 4.14 17 012 0032 11 4.86 17 012 0040 11 5.83 17 012 0050 11 7.07 17 012 0063 11 8.89 17 012 0075 11 10.43 17 012 0090 11 15.05 17 012 0110 11 19.34 17 012 0140 11 27.26 17 012 0160 11 34.36 Refer to page 269 for backing rings and gaskets 261

pp flame retardent - electrically cductive pipe and fittings Pipe PPs-el Electrically cductive grade Ventilati PN3.2/S-16/SDR33 PN6/S-8.3/SDR17 PN10/S-5/SDR11 Size Wall Code Price/m Code Price/m 32 50 63 75 90 110 3.0 19 705 0110 00 78.20 160 3.0 19 705 0160 00 114.73 180 3.0 19 705 0180 00 129.27 200 3.0 19 705 0200 00 143.76 225 3.5 19 705 0225 00 182.27 250 3.5 19 705 0250 00 218.20 315 5.0 19 705 0315 00 366.49 355 5.0 19 705 0355 00 413.66 400 6.0 19 705 0400 00 467.16 19 705 0090 33 51.30 19 705 0110 33 78.09 19 705 0160 33 160.06 19 705 0200 33 248.65 19 705 0225 33 308.07 19 705 0315 33 604.64 Code Price/m 19 705 0110 17 134.27 19 705 0160 17 282.22 19 705 0200 17 438.33 Code Price/m 19 705 0032 11 16.75 19 705 0050 11 43.13 19 705 0063 11 68.22 19 705 0075 11 95.16 19 705 0090 11 137.55 19 705 0110 11 185.20 Standard length 5m Please note that a transportati surcharge may be applied pipe diameters 250mm or larger - please enquire for details Tee 90º PN3.2 PN6 PN10 Size Code Price 32 50 63 75 90 110 19 006 0110 33 60.03 160 19 006 0160 33 136.72 200 19 006 0200 33 200.21 225 19 006 0225 33 374.99 250 19 006 0250 33 580.16 315 19 006 0315 33 931.76 Code Price 19 006 0110 17 90.23 19 006 0160 17 277.56 19 006 0200 17 465.60 Code Price 19 006 0032 11 7.21 19 006 0050 11 15.45 19 006 0063 11 23.99 19 006 0075 11 48.45 19 006 0090 11 72.27 19 006 0110 11 106.97 262

pp flame retardent - electrically cductive Bend 90º PN3.2 PN6 PN10 Size Code Price 32 50 63 75 90 110 19 001 0110 33 45.87 160 19 001 0160 33 87.16 200 19 001 0200 33 131.83 225 19 001 0225 33 162.18 250 19 001 0250 33 199.32 315 19 001 0315 33 349.89 Code Price 19 001 0110 17 66.98 19 001 0160 17 136.33 19 001 0200 17 206.92 Code Price 19 001 0032 11 7.78 19 001 0050 11 12.60 19 001 0063 11 18.06 19 001 0075 11 24.92 19 001 0090 11 36.06 19 001 0110 11 69.30 Reducer Ccentric Size PN3.2 PN6 PN10 Code Price 63x16 75x32 110x63 160x110 19 007 1611 33 94.41 225x160 19 007 2216 33 238.97 315x225 19 007 3122 33 275.54 Code Price 19 007 1611 17 96.06 19 007 2216 17 268.30 Code Price 19 007 6316 11 13.69 19 007 7532 11 21.84 19 007 1163 11 28.94 Stub Flange PN3.2 PN6 PN10 Size Code Price 32 50 63 75 90 110 19 012 0110 33 27.80 160 19 012 0160 33 48.98 200 19 012 0200 33 85.97 225 19 012 0225 33 96.43 250 19 012 0250 33 135.96 315 19 012 0315 33 175.64 Code Price 19 012 0110 17 27.80 19 012 0160 17 48.98 19 012 0200 17 89.42 Code Price 19 012 0032 11 7.64 19 012 0050 11 11.24 19 012 0063 11 14.03 19 012 0075 11 16.62 19 012 0090 11 23.82 19 012 0110 11 30.88 Backing Ring BS 4504 EN1072 NP10 Size PPs-el Code Price 32 19 014 0032 11 22.06 50 19 014 0050 11 32.58 63 19 014 0063 11 37.60 75 19 014 0075 11 41.70 90 19 014 0090 11 49.62 110 19 014 0110 11 79.18 140 160 19 014 0160 11 115.33 200 225 250 315 i Gaskets Refer to page 269 for backing rings and gaskets 263

filters and strainers Hayward Simplex Basket Strainer Descripti: In-line strainer with serviceable basket filter Mounting: Vertical Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Strainer Basket: Polypropylene or 316 Stainless Steel Strainer Mesh Sizes: PP: 1 /32", 1 /16", 1 /8", 3 /16" Stainless Steel: 20, 40, 60, 80, 100, 150, 200, 325 mesh Seals: FPM End Cnectis: NPT Threaded or Flanged Gauge: Optial NPT Female Threaded NPT Female Threaded PP Body PP Basket 1" BS401 00T 1 1 /2" BS401 50T 2" BS402 00T applicati PP Body St/St Basket 1" BSS401 00T 1 1 /2" BSS401 50T 2" BSS402 00T applicati Flanged ANSI 150 Flanged ANSI 150 PP Body PP Basket 1" BS401 00F 1 1 /2" BS401 50F 2" BS402 00F applicati PP Body St/St Basket 1" BSS401 00F 1 1 /2" BSS401 50F 2" BSS402 00F applicati Spare PP Basket 1" BS401001/_ 1 1 /2, 2" BS402001/_ applicati To specify the mesh size, add to part number e.g. 3" basket c/w 1/32" mesh = BS103001/32 Spare Stainless Steel Basket 1" BS710(XX) 1 1 /2, 2" BS720(XX) applicati To specify the mesh size, add to part number e.g. 2" basket c/w 60 mesh = BS72060 264

filters and strainers Hayward Bag Filter Descripti: In-line strainer with replaceable bag filter Mounting: In a horiztal positi Maximum Fluid Pressure at 20 C: 15.5 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Glass filled Polypropylene Strainer Basket: Cloth Strainer Mesh Sizes: 5, 10, 25, 50, 100 micr Seals: FPM End Cnectis: 2 NPT Female Threaded, flanged ASA 150 Gauge: Optial Single or Double Bag Filter Length Cnecti Simplex Duplex Code Price Code Price Single 2" FPT FLV4P1520T4VS - Single 2" ASA 150 FLV4P1520F4VS - Double 2" FPT FLV4P2520T4VS - Double 2" ASA 150 FLV4P2520F4VS FLT2DUP applicati applicati Polypropylene Filter Bags - Welded Cstructi Length Gauge Code Price Single* 1 micr F31R36590 Single* 5 micr F31R36817 Single* 10 micr F31R36552 Single* 25 micr F31R36596 Single* 50 micr F31R36589 Single* 100 micr F31R36551 Single* 200 micr F3AB00319 Double** 1 micr F31R36502 Double** 5 micr F31R36501 Double** 10 micr F31R36503 Double** 25 micr F31R36412 Double** 50 micr F31R36500 Double** 100 micr F31R36505 Double** 200 micr F3AB00222 applicati Polypropylene Filter Bags - Sewn Cstructi Length Gauge Code Price Single* 1 micr F3AB00013 Single* 5 micr F3AB00157 Single* 10 micr F3AB00019 Single* 25 micr F3AB00020 Single* 50 micr F3AB00014 Single* 100 micr F31A37288 Single* 200 micr F3AB00103 Double** 1 micr F31B36372 Double* 5 micr F31B37455 Double* 10 micr F3AA01434 Double* 25 micr F3AB00002 Double* 50 micr F3AA00160 Double* 100 micr F3AA01128 Double** 200 micr F3AB00057 applicati Polypropylene Mofilament Filter Bags - Sewn Cstructi Length Gauge Code Price Single* 150 micr F3AB00170 Single* 400 micr F3AB00173 Single* 600 micr F3AB00174 Single* 800 micr F3AB00175 Double* 150 micr F3AB00177 Double* 400 micr F3AB00180 Double* 600 micr F3AB00181 Double* 800 micr F3AB00182 applicati Note: Filter bags are sold in box quantities ly *Box quantity 50 ** Box quantity 30 IPS Flow Systems l Seaham Grange Industrial Estate l Seham l Co Durham l SR7 0PT l Tel: 0191 521 3111 l www.ipsflowsystems.com 265

manual valves Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuati Materials Body - Polypropylene Ball Seat - PTFE Seals - EPDM or FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True Uni design for easy maintenance Full bore design Tagging point included Matched Valve bracket for panel mounting and retrofit actuati. Pneumatically and Electrically actuated versis available Silice free request Pressure Rating 3/8"/16mm to 2.1/2"/75mm - 10 bar 3" - 4"/90mm - 110mm - 6 bar Cnectis Fusi Sockets Fusi Spigots BSP Female Threaded Flanged PN10 Valve Dimensis d 16 20 25 32 40 50 63 75 90 110 DN 10 15 20 25 32 40 50 65 80 80 G 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3 4 L 114.0 124.0 144.0 154.0 174.0 194.0 224.0 284.0 300.0 340.0 L1 120.0 130.0 150.0 160.0 180.0 200.0 230.0 290.0 310.0 350.0 A 62.0 62.0 69.0 73.0 83.0 94.0 108.0 133.0 160.0 160.0 Z 71.0 67.5 79.0 84.0 96.0 114.0 134.0 162.0 208.0 207.0 t 14.5 16.0 17.0 19.5 22.0 25.0 29.0 34.5 38.5 44.0 D 52.5 52.5 62.0 69.5 8.0 100.0 120.5 155.0 187.0 187.0 H 71.5 71.5 77.0 80.5 98.5 106.5 115.5 142.0 160.0 160.0 B 40.0 40.0 51.5 51.5 64.0 73.0 85.0 110.0 132.0 132.0 PN 10 10 10 10 10 10 10 10 6 6 Weight 0.16 0.16 0.23 0.28 0.47 0.74 1.11 2.28 3.87 3.87 Dimensis in mm 266

manual valves Praher Type S4 Ball Valve Descripti: In-line double uni ball valve with lockable handle Mounting: In any positi Maximum Fluid Pressure at 20 C: Sizes 16mm to 75mm - 10bar; Sizes 90mm to 110mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene (PP-H) Seals: EPDM or FPM Seats: PTFE End Cnectis: Fusi sockets, fusi spigots, BSP Female Threaded, Flanged BS4504 EN1092 PN10 Opti: Silic-free MM Fusi Sockets MM Fusi Sockets PTFE Seats 16 12 1378 52.72 20 12 1379 54.83 25 12 1381 65.87 32 12 1383 74.71 40 12 1385 95.56 50 12 1387 120.49 63 12 1389 155.00 75 12 1391 357.13 90 12 1393 545.93 110 12 2094 631.29 PTFE Seats 16 12 1377 61.41 20 12 1412 63.70 25 12 1380 77.19 32 12 1382 87.99 40 12 1384 111.15 50 12 1386 138.08 63 12 1388 175.68 75 12 1390 397.34 90 12 1392 605.85 110 12 2115 707.63 BSP Female Threaded BSP Female Threaded PTFE Seats 3 /8 12 1395 55.66 1 /2 12 1397 57.96 3/4 12 1399 69.95 1 12 1401 79.14 1 1 /4 12 1403 100.81 1 1 /2 12 1405 127.59 2 12 1407 165.34 2 1 /2 12 1409 372.70 3 12 1411 572.20 MM Fusi Spigots PTFE Seats 3 /8 12 1394 64.69 1 /2 12 1396 66.83 3/4 12 1398 80.96 1 12 1400 101.30 1 1 /4 12 1402 116.41 1 1 /2 12 1404 155.82 2 12 1406 184.72 2 1 /2 12 1408 412.92 3 12 1410 632.11 MM Fusi Spigots PTFE Seats 16 12 1430 52.72 20 12 1432 54.83 25 12 1434 65.87 32 12 1436 74.71 40 12 1438 95.56 50 12 1440 120.49 63 12 1442 155.00 75 12 1444 357.13 90 12 1446 545.93 110 12 2508 631.29 PTFE Seats 16 12 1431 61.41 20 12 1433 63.70 25 12 1435 77.19 32 12 1437 87.99 40 12 1439 111.15 50 12 1441 138.08 63 12 1443 175.68 75 12 1445 397.34 90 12 1447 605.85 110 12 2509 707.63 Flanged PN10 Flanged PN10 PTFE Seats 1 /2 12 2294 107.51 3 /4 12 2295 122.76 1 12 2170 158.90 1 1 /4 12 2296 191.74 1 1 /2 12 2168 247.65 2 12 2297 297.31 2 1 /2 12 2298 556.48 3 12 2299 800.20 4 12 2267 927.05 PTFE Seats 1 /2 12 2301 118.05 3/4 12 2302 136.24 1 12 2303 174.75 1 1 /4 12 2304 210.30 1 1 /2 12 2305 268.55 2 12 2306 321.94 2 1 /2 12 2307 604.34 3 12 2308 871.53 4 12 5510 1017.91 267

manual valves Praher T4 Diaphragm Valve Lockable Handle Visual Positi Indicator General Optial Valve Support Plates Sealing material: EPDM / EPDM-PTFE / FPM Body material: Polypropylene (PP-H) Dimensis: DN 15/d 20 - DN125/d140 Operating Pressure DN 15 / 1 /2" - DN 125 / 5" 10 bar Cnectis PP uni sockets 20mm-63mm PP fusi spigots 20mm-110mm Flanged PN10 20mm-140mm Features Safety gear wheel Corrosi Resistant Maintenance free operati over a lg working life Suitable for aggressive and dirty media Radial installati or removal Easy replacement of the diaphragms Technical Specificati For example: TYPE PRAHER, DIN 2403 PP Diaphragm valve T4 DN 15 d20 PP mm fusi spigot Sealing material EPDM-PTFE Safety gear wheel Max. Operating pressure 10 bar Valve Dimensis DN 15 - DN 50 DN 65 - DN 80 d 20 25 32 40 50 63 75 90 110 140 DN 15 20 25 32 40 50 65 80 100 125 G 1/2" 3/4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" 3" 4" 5" M 16.5 16.5 20.1 31.5 31.5 38.6 25.0 25.0 25.0 25.0 H 100.0 100.0 107.0 144.0 144.0 170.0 260.0 260.0 330.0 330.0 B 86.0 86.0 86.0 136.0 136.0 136.0 234.0 234.0 234.0 234.0 F 24.5 24.5 24.5 43.5 43.5 43.5 Lift 9.0 9.0 11.0 22.0 22.0 28.0 35.0 35.0 45.0 45.0 K M6 M6 M6 M8 M8 M8 L 124.0 144.0 154.0 174.0 194.0 224.0 284.0 300.0 340.0 - L1 130.0 150.0 160.0 180.0 200.0 230.0-310.0 350.0 400.0 T 12.0 12.0 12.0 15.0 15.0 15.0 t 28.5 36.0 36.0 38.5 46.0 46.0 37.0 37.0 50.0 - PN 10 10 10 10 10 10 10 10 10 10 Dimensis in mm 268

manual valves Praher Type T4 Diaphragm Valve Descripti: In-line diaphragm valve with positi indicator Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene (PP-H) Diaphragm: EPDM, FPM or PTFE (EPDM backed) End Cnectis: Fusi spigots, flanged BS4504 EN1092 Opti: Silic-free MM Fusi Spigots MM Fusi Spigots EPDM Diaphragm 20 12 0150 71.75 25 12 0154 80.28 32 12 0155 102.47 40 12 0156 119.51 50 12 0157 156.96 63 12 0158 196.20 75 12 0159 459.72 90 12 0160 499.13 110 12 0902 843.91 PTFE Diaphragm 20 12 0173 145.96 25 12 0175 155.33 32 12 0177 180.61 40 12 0178 228.22 50 12 0179 274.20 63 12 0180 348.08 75 12 0181 589.43 90 12 0182 688.75 110 12 0905 1058.98 MM Uni Sockets MM Uni Sockets EPDM Diaphragm 20 12 5038 88.84 25 12 5039 93.09 32 12 5040 113.61 40 12 5041 136.29 50 12 5042 177.30 63 12 5043 215.91 PTFE Diaphragm 20 12 5050 160.91 25 12 5051 168.29 32 12 5052 245.47 40 12 5053 275.82 50 12 5054 357.13 63 12 5055 380.90 Flanged PN10 Flanged PN10 EPDM Diaphragm 20 12 0229 106.72 25 12 0230 115.27 32 12 0231 136.61 40 12 0232 174.04 50 12 0233 208.52 63 12 0235 265.16 75 12 0237 517.19 90 12 0238 576.28 110 12 0909 1024.51 140 12 0910 1914.38 PTFE Diaphragm 20 12 0250 172.39 25 12 0251 181.43 32 12 0252 206.07 40 12 0253 271.72 50 12 0255 305.39 63 12 0257 411.26 75 12 0258 615.68 90 12 0260 848.82 110 12 0912 1239.60 140 12 0913 2190.20 MM Fusi Spigots Flanged PN10 FPM Diaphragm 20 12 0161 145.96 25 12 0163 155.33 32 12 0164 180.61 40 12 0165 228.22 50 12 0166 274.20 63 12 0170 348.08 75 12 0171 727.90 90 12 0172 766.19 FPM Diaphragm 20 12 0239 172.39 25 12 0240 181.43 32 12 0241 206.07 40 12 0242 271.72 50 12 0243 305.39 63 12 0246 411.26 75 12 0248 704.20 90 12 0249 846.24 Spears Needle Valve Descripti: Globe or Angle pattern flow ctrol valve Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seal: PTFE End Cnectis: Female NPT Threaded Feature: Built-in panel or bracket mounting nut Globe Pattern Valve 1/4 5591-002P 72.58 3 /8 5591-003P 72.58 Angle Pattern Valve 1 /4 5691-002P 72.58 3 /8 5691-003P 72.58 269

manual valves Praher Type S4 T & L-Port Ball Valve Descripti: In-line horiztal T-port or L-port ball valve with lockable handle and uni ends Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene (PP-H) Seals: EPDM or FPM Seats: PTFE End Cnectis: Fusi sockets or fusi spigots T-Port Ball Valve MM Fusi Sockets MM Fusi Sockets PTFE Seats 16 124767 135.15 20 124771 135.15 25 125014 136.94 32 124775 137.91 40 125016 204.41 50 124890 206.87 63 124894 251.20 PTFE Seats 16 124898 157.94 20 124902 158.60 25 125022 161.42 32 124906 163.02 40 125024 247.10 50 124910 256.96 63 124914 322.62 L-Port Ball Valve MM Fusi Sockets MM Fusi Sockets PTFE Seats 16 124768 135.15 20 124772 135.95 25 125015 136.94 32 124776 137.91 40 125017 204.41 50 124891 206.87 63 124895 251.20 PTFE Seats 16 124899 157.94 20 124903 158.60 25 125023 161.42 32 124907 163.02 40 125025 247.10 50 124911 256.96 63 124915 322.62 Also available with fusi spigot cnectis. Prices are the same as above. Praher Valve Bracket for Type S4 T & L-Port Valve Valve bracket shown in PVC-U Size Code Price 16 17.0511 33.17 20 17.0511 33.17 25 17.0512 37.43 32 17.0512 37.43 40 17.0513 42.36 50 17.0513 42.36 63 17.0514 42.36 ASV Stubbe ProfiDos 101 Dosing Ball Valve Descripti: In-line double uni ball valve with flow indicator Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM or FPM Seats: PTFE End Cnectis: Fusi sockets Features: Accurate flow ctrol with visible indicator MM Fusi Sockets MM Fusi Sockets PTFE Seats 20 132 667 68.06 25 132 668 70.90 32 132 669 73.86 40 132 670 76.71 PTFE Seats 20 132 679 78.93 25 132 680 85.49 32 132 681 92.04 40 132 682 98.57 270

manual valve accessories Praher Type S4 Ball Valve with Actuator Adaptor Kit Includes: Polypropylene Ball Valve, Polypropylene Valve Bracket, Csole, Actuator Adaptor, Screw Set Size Code Price 16 122 511 123.47 20 122 512 125.73 25 122 513 138.16 32 122 514 148.67 40 122 515 201.02 50 122 516 227.35 63 122 517 262.44 75 122 518 484.20 90 122 519 670.05 110 122 520 768.17 Prices request for BSP threaded sockets or PN10 flanged cnectis Size Code Price 16 126.518 142.93 20 applicati 25 applicati 32 120.416 168.15 40 applicati 50 122.700 252.08 63 120.417 291.19 75 applicati 90 120.418 745.04 110 applicati Praher Valve Bracket for Type S4 Ball Valve Size Code Price 16 17.0279 32.51 20 17.0279 32.51 25 17.0280 34.82 32 17.0281 36.95 40 17.0228 39.41 50 17.0230 41.36 63 17.0232 43.84 75 17.0275 61.25 90 17.0282 68.47 110 17.0282 68.47 Valve shown with bracket Diaphragm Valve Mounting Plate Ensures clearance of uni nut from mounting surface Complete with two fixing screws. Valve Plate Size Thickness Code Price (mm) 20 16.0 14 0103 6.08 25 23.0 14 0102 6.08 32 23.0 14 0102 6.08 40 18.5 14 0123 9.88 50 23.5 14 0109 9.88 63 23.5 14 0109 9.88 Replacement T4 Diaphragm Mounting plate shown fitted to valve EPDM Diaphragm 20/ 1 /2 05.0457 23.98 25/ 3 /4 05.0457 23.98 32/1 05.0458 25.45 40/1 1 /4 05.0459 29.06 50/1 1 /2 05.0459 29.06 63/2 05.0460 30.21 75/2 1 /2 12.0933 62.72 90/3 12.0933 62.72 110/4 12.0934 142.19 5 12.0934 142.19 EPDM/PTFE Diaphragm 20/ 1 /2 05.0473 48.57 25/ 3 /4 05.0473 48.57 32/1 05.0474 54.50 40/1 1 /4 05.0475 67.54 50/1 1 /2 05.0475 67.64 63/2 05.0476 76.52 75/2 1 /2 12.0918 372.70 90/3 12.0918 372.70 110/4 12.0919 426.88 5 12.0919 426.88 FPM Diaphragm 20/ 1 /2 05.0465 112.48 25/ 3 /4 05.0465 112.48 32/1 05.0466 116.91 40/1 1 /4 05.0467 129.38 50/1 1 /2 05.0467 129.38 63/2 05.0468 274.20 75/2 1 /2 12.0935 424.83 90/3 12.0935 424.83 110/4 12.0936 527.74 5 12.0936 527.74 271

manual valves Praher K4 Butterfly Valve Locking Handle Universal Drilling PP-GF Body PP disc Materials Support Lugs in Base Body - PP-GF Disc - Polypropylene Seals - EPDM or FPM Sizes 2 1 /2"/75mm - 8"/225mm Features Only Body Seal and Disc in ctact with media Double sealed shaft Valve support lugs in base Direct actuator mounting Low torque operati Multi-positi Lockable Handle Manual or Gear operati All sizes PN10 rated Universal drilling - can be used withdin, ANSI, BS and JIS flanges Pressure Rating PN10 Cnectis Between flanges, universaly drilled Valve Dimensis 272 Size 2 1 /2"/75 3"/90 4"/110 6"/160 8"/225 A 230 230 300 386 386 D 65 80 100 150 200 C 133 176 206 261 314 W 90º 45º 45º 45º 45º J 19 19 19 23 23 K 127-145 146-160 175-190.5 234.5-241.3 290-298.5 H 285 292 322 396 458 h 100 100 115 147.5 175 E 98 116 146 196 251 M 114 114 114 150 150 Z 46 49 56 70 71 PN 10 bar 10 bar 10 bar 10 bar 10 bar Dimensis in mm

manual valves Praher Type K4 Butterfly Valve Descripti: Lug style butterfly valve with universal drilling for mounting between flanges. (DIN, ANSI & BS) Cstructi: Body: PP-GF Disc: Polypropylene Seals: EPDM or FPM Pressure rating: PN10 Size: 2 1 /2"/75mm - 8"/225mm Lever Operated 2 1 /2"/75 12.5870 228.17 3"/90 12.5871 267.76 4"/110 12.5872 286.26 5"/140 12.8458 410.38 6"/160 12.5873 477.17 8"/225 12.5874 668.87 Lever Operated 2 1 /2"/75 12.5875 317.48 3"/90 12.5876 382.37 4"/110 12.5877 403.21 5"/140 12.8459 546.42 6"/160 12.5878 616.78 8"/225 12.5879 837.66 Gear Operated 2 1 /2"/75 12.6020 460.71 3"/90 12.6021 500.30 4"/110 12.6022 514.16 5"/140 12.8762 592.32 6"/160 12.6023 704.09 8"/225 12.6024 895.80 Gear Operated 2 1 /2"/75 12.6025 544.06 3"/90 12.6026 614.91 4"/110 12.6027 643.36 5"/140 12.8764 719.76 6"/160 12.6028 843.70 8"/225 12.6029 1064.57 273

manual valves Praher Type S4 Butterfly Valve Descripti: Wafer style butterfly valve Mounting: In any positi, between flanges to BS 4504 EN1072 PN10 Maximum Fluid Pressure at 20 C: Sizes 90mm to 140mm - 10 bar; Sizes 160mm to 225mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body and Disc: Polypropylene Seals: EPDM or FPM Shaft: Stainless steel 304 End Cnectis: Flange mounted (flanges not included) Lever operated Lever operated 3"/90 12 1927 400.61 3"/90 12 1931 463.00 4"/110 12 1928 481.05 4"/110 12 1932 548.38 5"/140 12 2544 594.34 5"/140 12 2310 687.94 6"/160 12 1929 692.01 6"/160 12 1933 773.31 8"/225 12 1930 884.94 8"/225 12 1934 990.02 Gear operated Gear operated 3"/90 12 2545 981.82 4"/110 12 2546 1026.13 5"/140 12 2547 1118.07 6"/160 12 2548 1162.41 8"/225 12 2549 1300.32 3"/90 12 2550 1044.20 4"/110 12 2551 1093.46 5"/140 12 2552 1211.68 6"/160 12 2553 1242.86 8"/225 12 2554 1405.39 Asahi Type 57 Butterfly Valve Descripti: Wafer style butterfly valve Mounting: In any positi, between flanges to ANSI 150 Maximum Fluid Pressure at 20 C: Sizes 1 1 /2" to 10" : 10 bar Sizes 12" to 14" : 6.9 bar; 16" : 5.8 bar; 18" : 5.1 bar; 20" to 24" : 3.4 bar Fluid Temperature Range: 0 C-60 C Cstructi: Body: Polypropylene Disc: Polypropylene or PVDF Seals: EPDM, FPM or Nitrile Shaft: Stainless Steel 316 End Cnectis: Flange mounted (flanges not included) Polypropylene Disc Lever Operated 1 1 /2 3752-015 800.39 2 3752-020 839.04 2 1 /2 3752-025 1064.51 3 3752-030 1190.11 4 3752-040 1273.86 6 3752-060 2019.50 8 3752-080 3009.91 Lever Operated 1 1 /2 3753-015 909.91 2 3753-020 945.33 2 1 /2 3753-025 1273.86 3 3753-030 1318.95 4 3753-040 1404.31 6 3753-060 2959.99 8 3753-080 3420.59 PVDF Disc Lever Operated 1 1 /2 3740-015 909.91 2 3740-020 948.56 2 1 /2 3740-025 1196.56 3 3740-030 1349.55 4 3740-040 1452.63 6 3740-060 2444.65 8 3740-080 3694.37 Lever Operated 1 1 /2 3741-015 1019.40 2 3741-020 1056.46 2 1 /2 3741-025 1405.91 3 3741-030 1478.40 4 3741-040 1584.68 6 3741-060 3385.16 8 3741-080 4103.42 274

manual valves Polypropylene Disc Plasgear Operated 1 1 /2 3726-015 1220.73 2 3726-020 1259.37 2 1 /2 3726-025 1486.43 3 3726-030 1610.45 4 3726-040 1695.80 6 3726-060 2438.22 8 3726-080 3377.10 10 3726-100 3863.44 12 3726-120 5385.33 14 3726-140 16 3726-160 applicati applicati Plasgear Operated Nitrile Seals 1 1 /2 3735-015 1220.73 2 3735-020 1259.37 2 1 /2 3735-025 1486.43 3 3735-030 1610.45 4 3735-040 1695.80 6 3735-060 2438.22 8 3735-080 3377.10 10 3735-100 3863.44 12 3735-120 5385.33 14 3735-140 16 3735-160 applicati applicati Metal Gear Operated 12 3801-120 14 3801-140 16 3801-160 18 3801-180 20 3801-200 24 3801-240 applicati Metal Gear Operated Nitrile Seals 12 3802-120 14 3802-140 16 3802-160 18 3802-180 20 3802-200 24 3802-240 applicati Plasgear Operated 1 1 /2 3727-015 1330.23 2 3727-020 1365.67 2 1 /2 3727-025 1695.80 3 3727-030 1739.28 4 3727-040 1826.24 6 3727-060 3380.32 8 3727-080 3762.00 10 3727-100 5188.85 12 3727-120 7248.61 14 3727-140 16 3727-160 applicati applicati Metal Gear Operated 12 3803-120 14 3803-140 16 3803-160 18 3803-180 20 3803-200 24 3803-240 applicati PVDF Disc Plasgear Operated 1 1 /2 3736-015 1330.23 2 3736-020 1370.48 2 1 /2 3736-025 1618.49 3 3736-030 1771.49 4 3736-040 1874.55 6 3736-060 2864.98 8 3736-080 4061.55 10 3736-100 5069.68 12 3736-120 7047.32 14 3736-140 16 3736-160 applicati applicati Plasgear Operated 1 1 /2 3737-015 1441.36 2 3737-020 1475.17 2 1 /2 3737-025 1827.85 3 3737-030 1898.72 4 3737-040 2005.00 6 3737-060 3807.10 8 3737-080 4446.44 10 3737-100 6395.08 12 3737-120 8908.98 14 3737-140 16 3737-160 applicati applicati Metal Gear Operated 12 3804-120 14 3804-140 16 3804-160 18 3804-180 20 3804-200 24 3804-240 applicati Metal Gear Operated 12 3805-120 14 3805-140 16 3805-160 18 3805-180 20 3805-200 24 3805-240 applicati 275

manual valves Praher K4 Check Valve Visual Positi Indicator Universal Drilling Materials 85º Max Opening Body - PP-GF Disc - PP-GF Seals - EPDM or FPM Sizes 2 1 /2"/75mm - 10"/250mm Features Excellent Flow Rates Wide opening (85%) Low pressure drop Visual open-closed indicator Spring return All sizes PN10 rated Universal drilling - can be used withdin, ANSI, BS and JIS flanges Pressure Rating PN10 Cnectis Between flanges, universaly drilled Tightening torque for flange cnectis DN 65 80 100 150 200 250 300 Nm 15 18 20 40 55 60 65 Valve Dimensis DN A B C K W 65 115 63 20 139-145 90º 80 128 71 20 150-160 45º 100 155 80 20 175-191 45º 150 212 106 24 234-242 45º 200 264 140 24 290-299 45º 250 325 140 27 350-362 30º Dimensis in mm 276

manual valves Praher Type K4 Check Valve Descripti: Lug style check valve with universal drilling for mounting between flanges. (DIN, ANSI & BS) Cstructi: Body: Polypropylene Seals: EPDM or FPM Pressure rating: PN10 Size: 2 1 /2"/75mm - 10"/250mm 2 1 /2"/75 12.5832 340.85 3"/90 12.5833A 375.93 4"/110 12.5834A 450.31 6"/160 12.5835A 618.43 8"/225 12.5836 1106.16 10"/250 12.5837 1855.71 2 1 /2"/75 12.5839 385.34 3"/90 12.5840A 437.59 4"/110 12.5841A 519.89 6"/160 12.5842A 703.30 8"/225 12.5843 1203.44 10"/250 12.5844 1967.83 Kv Value Table Pressure Lost 1 bar 0.001 bar DN 80 2958 l/min 94 l/min DN 100 5633 l/min 178 l/min DN 150 12466 l/min 394 l/min DN 200 21166 l/min 699 l/min Pressure loss based maximum opening of 85% 277

manual valves Praher Type S4 Air Release Valve Descripti: In-line air release valve Mounting: In a vertical positi Maximum Fluid Pressure at 20 C: Sizes 16mm to 75mm - 10 bar; Sizes 90mm to 110mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM or FPM Ce: Polypropylene End Cnectis: Fusi sockets, fusi spigots or female BSP threaded MM Fusi Sockets MM Fusi Sockets 16 12 1550 39.25 16 12 1551 46.81 20 12 1552 41.22 20 12 1553 48.76 25 12 1554 46.81 25 12 1555 56.16 32 12 1556 54.34 32 12 1557 65.35 40 12 1558 61.41 40 12 1559 74.38 50 12 1560 83.75 50 12 1561 98.69 63 12 1562 124.11 63 12 1563 140.87 75 12 1564 307.85 75 12 1565 341.50 90 12 1566 404.70 90 12 1567 455.62 110 12 2539 491.73 110 12 2542 542.63 MM Fusi Spigots MM Fusi Spigots 16 12 1568 39.25 20 12 1570 41.22 25 12 1572 46.81 32 12 1574 54.34 40 12 1576 61.41 50 12 1578 83.75 63 12 1580 124.11 75 12 1582 307.85 90 12 1584 404.70 110 12 2540 491.73 16 12 1569 46.81 20 12 1571 48.76 25 12 1573 56.16 32 12 1575 65.35 40 12 1577 74.38 50 12 1579 98.69 63 12 1581 140.87 75 12 1583 341.50 90 12 1585 455.62 110 12 2543 542.63 Praher Type S4 Foot Valve Descripti: In-line foot valve with screen Mounting: In a vertical positi Maximum Fluid Pressure at 20 C: Sizes 16mm to 75mm - 10 bar; Sizes 90mm to 110mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM or FPM Ce: Polypropylene (weighted) End Cnectis: Fusi sockets, fusi spigots or female BSP threaded MM Fusi Sockets MM Fusi Sockets 16 12 1604 44.99 16 12 1605 52.38 20 12 1606 46.81 20 12 1607 54.50 25 12 1608 52.38 25 12 1609 61.91 32 12 1610 59.12 32 12 1611 70.43 40 12 1612 73.74 40 12 1613 86.68 50 12 1614 96.06 50 12 1615 111.00 63 12 1616 132.32 63 12 1617 148.92 75 12 1618 321.00 75 12 1619 353.81 90 12 1620 413.74 90 12 1621 463.83 110 12 2535 500.75 110 12 2537 550.84 MM Fusi Spigots MM Fusi Spigots 16 12 1622 44.99 20 12 1624 46.81 25 12 1626 52.38 32 12 1628 59.12 40 12 1630 73.74 50 12 1632 96.06 63 12 1634 132.32 75 12 1636 321.00 90 12 1638 413.74 110 12 2536 500.75 16 12 1623 52.38 20 12 1625 54.50 25 12 1627 61.91 32 12 1629 70.43 40 12 1631 86.68 50 12 1633 111.00 63 12 1635 148.92 75 12 1637 353.81 90 12 1639 463.83 110 12 2538 550.84 278

manual valves Praher Type S4 Check (N Return) Valve Descripti: In-line spring weighted ce check valve Mounting: In any positi Maximum Fluid Pressure at 20 C: Sizes 16mm to 75mm - 10 bar; Sizes 90mm to 110mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM or FPM Spring: Stainless Steel sleeved in PTFE End Cnectis: Fusi sockets, fusi spigots or female BSP threaded MM Fusi Sockets MM Fusi Sockets 16 12 1502 46.81 16 12 1838 54.50 20 12 1503 48.76 20 12 1839 56.16 25 12 1504 56.16 25 12 1840 65.35 32 12 1505 65.35 32 12 1841 76.68 40 12 1506 79.32 40 12 1842 92.46 50 12 1507 99.02 50 12 1843 113.95 63 12 1508 134.48 63 12 1844 151.22 75 12 1509 323.43 75 12 1845 356.28 90 12 1510 417.84 90 12 1846 468.74 110 12 2531 490.91 110 12 2533 555.75 BSP Female Threaded BSP Female Threaded 3 /8 12 1532 54.83 1 /2 12 1534 56.49 3 /4 12 1536 66.17 1 12 1538 76.68 1 1 /4 12 1540 92.79 1 1 /2 12 1542 116.91 2 12 1544 159.26 2 1 /2 12 1546 363.67 3 12 1548 485.16 MM Fusi Spigots 3 /8 12 1533 62.22 1 /2 12 1535 64.04 3 /4 12 1537 75.69 1 12 1539 87.99 1 1 /4 12 1541 105.74 1 1 /2 12 1543 131.85 2 12 1545 176.52 2 1 /2 12 1547 397.34 3 12 1549 535.24 MM Fusi Spigots 16 12 1513 46.81 20 12 1515 48.76 25 12 1517 56.16 32 12 1519 65.35 40 12 1522 79.32 50 12 1524 99.02 63 12 1526 134.48 75 12 1528 323.43 90 12 1530 417.84 110 12 2532 490.91 16 12 1514 54.50 20 12 1516 56.16 25 12 1518 65.35 32 12 1521 76.68 40 12 1523 92.46 50 12 1525 113.95 63 12 1527 151.22 75 12 1529 356.28 90 12 1531 468.74 110 12 2534 555.75 Ball Float Valve Descripti: Liquid level ctrol valve Mounting: In a horiztal positi Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-60 C Cstructi: Body: Polypropylene Arm: Polypropylene Float: Polypropylene End Cnectis: BSP male threaded Adjustable Cam 1 /2 HA/BVADJ/1PE/EP 42.12 1 HA/BVADJ/5PE/EP 148.64 1 1 /2 HA/BVADJ/7PE/EP 179.61 Adjustable Cam Design 5 Different Positis 279

manual valves Praher Type S4 Wafer Check Valve Descripti: Wafer style flap check valve Mounting: In any positi, between flanges to BS 4504 EN1072, PN10. Optial spring return for mounting in horiztal positi or for pulsating flow. Maximum Fluid Pressure at 20 C: Sizes 40mm to 160mm - 10 bar; sizes 225mm to 500mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM or FPM Spring: Stainless Steel End Cnectis: Flange mounted (flanges not included) No Spring Return No Spring Return 1 1 /4"/40 07 0190 95.24 1 1 /4"/40 07 0191 123.32 1 1 /2"/50 07 0200 99.69 1 1 /2"/50 07 0201 127.59 2"/63 07 0040 133.32 2"/63 07 0042 151.55 2 1 /2"/75 07 0050 138.08 2 1 /2"/75 07 0052 153.53 3"/90 07 0060 147.61 3"/90 07 0062 176.52 4"/110 07 0070 171.59 4"/110 07 0072 221.66 5"/140 07 0080 195.37 5"/140 07 0082 261.88 6"/160 07 0090 244.65 6"/160 07 0092 330.00 8"/225 07 0100 543.46 8"/225 07 0102 606.66 10"/280 07 0110 783.99 10"/280 07 0112 845.54 12"/315 07 0120 1006.44 12"/315 07 0122 1080.31 14"/355 07 0620 1950.48 14"/355 07 0623 2520.19 16"/450 07 0621 2218.09 16"/450 07 0624 3007.81 20"/560 07 0622 3628.45 20"/560 07 0625 5027.25 Stainless Steel Spring Return Stainless Steel Spring Return 1 1 /4"/40 07 0192 177.30 1 1 /2"/50 07 0205 182.27 2"/63 07 0041 213.44 2 1 /2"/75 07 0051 221.66 3"/90 07 0061 236.41 4"/110 07 0071 274.20 5"/140 07 0081 312.76 6"/160 07 0091 344.80 8"/225 07 0101 675.61 10"/280 07 0111 962.12 12"/315 07 0121 1247.78 1 1 /4"/40 07 0193 212.63 1 1 /2"/50 07 0203 216.72 2"/63 07 0043 229.85 2 1 /2"/75 07 0053 231.49 3"/90 07 0063 276.66 4"/110 07 0073 325.91 5"/140 07 0083 383.39 6"/160 07 0093 458.88 8"/225 07 0103 678.89 10"/280 07 0113 1003.15 12"/315 07 0123 1321.68 Installati Adaptor for Wafer Check Valve Flange mounting Allows the valve to open fully Will accommodate use with heavy wall pipes 1 1 /4"/40 07 0467 24.12 1 1 /2"/50 07 0468 31.35 2"/63 07 0469 42.03 2 1 /2"/75 07 0470 50.25 3"/90 07 0471 85.06 4"/110 07 0472 127.07 5"/140 07 0473 192.09 6"/160 07 0474 344.80 8"/225 07 0475 845.54 10"/280 07 0476 1116.44 12"/315 07 0477 1515.40 Note: backing ring not included. i Flange Mounted Wafer Check Valves Occasially the flange mounted wafer check valve will have restricted opening if it is mounted in a heavy wall pipe. For all installatis in heavy wall pipes we recommend the use of the additial installati adaptor to ensure that the valve will open fully. 280

manual valves Praher Type S4 Line Strainer Descripti: In-line strainer with uni ends Mounting: In any positi Maximum Fluid Pressure at 20 C: Sizes 16mm to 75mm - 10 bar; Sizes 90mm to 110mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM Strainer: Polypropylene with 1.8mm mesh; Stainless Steel with 0.5mm, 0.75mm or 1mm mesh End Cnectis: Fusi sockets, fusi spigots MM Fusi Sockets MM Fusi Spigots Polypropylene Screen 16 12 1711 46.62 20 12 1712 46.62 25 12 1713 56.16 32 12 1714 65.35 40 12 1715 79.32 50 12 1716 99.02 63 12 1717 134.48 75 12 1718 354.64 90 12 1719 440.01 110 12 1720 545.72 Polypropylene Screen 16 12 1725 46.62 20 12 1726 46.62 25 12 1727 56.16 32 12 1728 65.35 40 12 1729 79.32 50 12 1730 99.02 63 12 1731 134.48 75 12 1732 354.64 90 12 1733 440.01 110 12 1734 545.72 MM Fusi Sockets Stainless Steel Screens* no screen included 16 12 5000 42.69 20 12 5001 42.69 25 12 5002 52.22 32 12 5003 61.41 40 12 5004 74.53 50 12 5005 93.90 63 12 5006 128.90 75 12 5007 347.26 90 12 5008 429.35 110 12 5009 531.64 0.5mm mesh * Note: A filter support is required for the stainless steel screen 16/ 3 /8 50606 13.60 20/ 1 /2 50606 13.60 25/ 3 /4 50608 17.07 32/1 50608 17.07 40/1 1 /4 50609 19.27 50/1 1 /2 50610 23.50 63/2 50611 27.20 75/2 1 /2 50612 41.21 90/3 50613 50.17 110/4 50613 50.17 ASV Stubbe Gauge Guard Descripti: Pressure gauge cnector with isolating diaphragm Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Diaphragm: PTFE (EPDM backed) End Cnectis: Fusi Spigots, NPT Female Threaded 25x 1 /4x 1 /4" 135534 97.80 32x 1 /2x 1 /2" 135537 97.80 Note: gauge not included. 0.75mm mesh 1mm mesh 16/ 3 /8 50614 13.60 20/ 1 /2 50614 13.60 25/ 3 /4 50616 17.07 32/1 50616 17.07 40/1 1 /4 50617 19.27 50/1 1 /2 50618 23.50 63/2 50619 27.20 75/2 1 /2 50620 41.21 90/3 50621 50.17 110/4 50621 50.17 16/ 3 /8 50622 13.60 20/ 1 /2 50622 13.60 25/ 3 /4 50624 17.07 32/1 50624 17.07 40/1 1 /4 50625 19.27 50/1 1 /2 50626 23.50 63/2 50627 27.20 75/2 1 /2 50628 41.21 90/3 50629 50.17 110/4 50629 50.17 Filter Support for Stainless Steel Screen 16/ 3 /8 14.1474 28.36 20/ 1 /2 14.1474 28.36 25/ 3 /4 14.1475 29.72 32/1 14.1476 29.72 40/1 1 /4 14.1477 36.35 50/1 1 /2 14.1478 40.39 63/2 14.1479 43.40 75/2 1 /2 14.1480 55.90 90/3 14.1481 50.17 110/4 14.1481 73.47 281

actuated valves Actuated Valves Note: Valve for illustrati purposes ly Valve Actuati Almost all the valves we supply can be automated. From simple air actuati, to complex cfiguratis, we can build a unit to your exact specificatis. Our in house experts can advise you the optis available and suggest the most suitable unit for your applicati. The valves are normally assembled by our dedicated valve actuati team, who can provide comprehensive after sales service. Standard valves are shown the following pages, but please ctact Ty Welsh for any special requirements you may have. 282

actuated valves Praher Type S4 Electrically Actuated Ball Valve Descripti: In-line ball valve with electric actuator Mounting: In any positi Maximum Fluid Pressure at 20 C: Sizes up to 63mm - 10 bar; 75mm - 6 bar; 90mm - 5 bar; 110mm - 4 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM or FPM Seats: PTFE End Cnectis: Fusi Sockets, Fusi Spigots, BSP Threaded, Flanged BS4504 EN1072 PN10 Actuati: Housing Material: Plastic with epoxy coated aluminium base Voltages: 240v AC; 110v AC; 24v AC; 110v DC; 24v DC; 12v DC Frequency Range: 50/60 Hz Protecti: IP65 Manual Override: Optial Positi Indicator: Included Ctacts: Open, closed. Additial ctacts optial. MM Fusi Sockets MM Fusi Sockets 110v ac PTFE Seats 16 12 1378 E2AG 619.08 20 12 1379 E2AG 626.67 25 12 1381 E2AG 639.43 32 12 1383 E2AG 649.88 40 12 1385 E2AG 672.17 50 12 1387 E2AG 698.09 63 12 1389 E2AG 732.86 75 12 1391 E2AG 1167.96 90 12 1393 E2AG 1355.24 110 12 2094 E2AG 1437.42 110v ac PTFE Seats 16 12 1377 E2AG 632.81 20 12 1412 E2AG 635.50 25 12 1380 E2AG 650.19 32 12 1382 E2AG 662.83 40 12 1384 E2AG 687.04 50 12 1386 E2AG 714.67 63 12 1388 E2AG 752.61 75 12 1390 E2AG 1206.67 90 12 1392 E2AG 1412.92 110 12 2115 E2AG 1511.70 Electric Actuated Valve Optis Switch Optis Price Open/Closed included Open/Closed plus 2 x extra volt free 103.11 Actuator Optis Reversible actuator with manual override standard Uni-directial actuator without manual override applicati Customer specificati actuator applicati EEXD versi actuator applicati Power Optis 110v AC standard 240v AC free opti 24v DC applicati 24v AC applicati Extra Optis Heater and thermostat applicati 4-20Ma positier applicati Fail-Safe operati applicati Pneumatic Actuated Valve Optis Body Material Optis Price Technopolymer standard Hard anodised aluminium free opti Stainless steel applicati Double pack epoxy coated applicati Switchbox Optis (with beac) IP65 Technopolymer 2 x mechanical switches 96.43 IP65 Technopolymer 2 x proximity switches EEXIA 377.42 IP67 Polycarbate 2 x V3 gold plated switches 130.47 IP67 Polycarbate 2 x V3 gold plated switches EEXIA 204.19 IP67 Polycarbate 2 x proximity switches EEXIA 326.17 IP67 Aluminium 2 x V3 gold plated switches EEXD 340.35 Solenoid Valve Optis 240v AC Solenoid 99.26 110v AC Solenoid 99.26 24v DC Solenoid 99.26 24v AC Solenoid 99.26 Technical Resources Register line for our technical catalogue www.ipsflowsystems.com Or call our technical team : 0800 975 79 71 283

actuated valves Praher Type S4 Pneumatically Actuated Ball Valve Descripti: In-line ball valve with pneumatic operati Mounting: In any positi Maximum Fluid Pressure at 20 C: Sizes up to 75mm - 10 bar; Sizes 90mm and 110mm - 6 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM or FPM Seats: PTFE End Cnectis: Fusi Sockets, Fusi Spigots, BSP Threaded, Flanged BS4504 EN1072 PN10 Actuati: Housing Material: Plastic (optial aluminium) Air Actuators: Fail-safe close, Fail-safe open, double acting Protecti: IP65 Manual Override: Optial Positi Indicator: Included Ctacts: Optial limit switch box with two mechanical switches Pilot Valve: Solenoid, not included MM Fusi Sockets MM Fusi Sockets Fail-safe Close PTFE Seats 16 12 1378 P1A 329.46 20 12 1379 P1A 331.51 25 12 1381 P1A 343.62 32 12 1383 P1A 353.70 40 12 1385 P1A 409.04 50 12 1387 P1A 434.75 63 12 1389 P1A 539.88 75 12 1391 P1A 798.80 90 12 1393 P1A 1063.48 110 12 2094 P1A 1248.54 Fail-safe Close PTFE Seats 16 12 1377 P1A 337.90 20 12 1412 P1A 340.13 25 12 1380 P1A 354.68 32 12 1382 P1A 366.60 40 12 1384 P1A 424.21 50 12 1386 P1A 451.82 63 12 1388 P1A 559.98 75 12 1390 P1A 837.88 90 12 1392 P1A 1121.69 110 12 2115 P1A 1322.73 MM Fusi Spigots MM Fusi Spigots Fail-safe Close PTFE Seats 16 12 1430 P1A 329.46 20 12 1432 P1A 331.51 25 12 1434 P1A 343.62 32 12 1436 P1A 353.70 40 12 1438 P1A 409.04 50 12 1440 P1A 434.75 63 12 1442 P1A 539.88 75 12 1444 P1A 798.80 90 12 1446 P1A 1063.48 110 12 2508 P1A 1248.54 Fail-safe Close PTFE Seats 16 12 1431 P1A 337.90 20 12 1433 P1A 340.13 25 12 1435 P1A 354.68 32 12 1437 P1A 366.60 40 12 1439 P1A 424.21 50 12 1441 P1A 451.82 63 12 1443 P1A 559.98 75 12 1445 P1A 837.88 90 12 1447 P1A 1121.69 110 12 2509 P1A 1322.73 MM Fusi Sockets MM Fusi Sockets Double Acting PTFE Seats 16 12 1378 P3A 305.52 20 12 1379 P3A 307.59 25 12 1381 P3A 319.71 32 12 1383 P3A 329.77 40 12 1385 P3A 351.61 50 12 1387 P3A 377.31 63 12 1389 P3A 438.56 75 12 1391 P3A 696.49 90 12 1393 P3A 1034.75 110 12 2094 P3A 1052.29 Double Acting PTFE Seats 16 12 1377 P3A 313.96 20 12 1412 P3A 316.20 25 12 1380 P3A 330.72 32 12 1382 P3A 342.68 40 12 1384 P3A 366.60 50 12 1386 P3A 394.38 63 12 1388 P3A 457.87 75 12 1390 P3A 732.59 90 12 1392 P3A 997.27 110 12 2115 P3A 1126.48 MM Fusi Spigots MM Fusi Spigots Double Acting PTFE Seats 16 12 1430 P3A 305.52 20 12 1432 P3A 307.59 25 12 1434 P3A 319.71 32 12 1436 P3A 329.77 40 12 1438 P3A 351.61 50 12 1440 P3A 377.31 63 12 1442 P3A 438.56 75 12 1444 P3A 693.49 90 12 1446 P3A 1034.75 110 12 2508 P3A 1052.14 Double Acting PTFE Seats Requires pilot valve - enquire for details. Also available with BSP female threaded cnectis, and with fail-safe open actuators. Please enquire for details. 16 12 1431 P3A 313.96 20 12 1433 P3A 316.20 25 12 1435 P3A 330.72 32 12 1437 P3A 342.68 40 12 1439 P3A 366.78 50 12 1441 P3A 394.38 63 12 1443 P3A 457.87 75 12 1445 P3A 732.59 90 12 1447 P3A 997.27 110 12 2509 P3A 1126.48 284

actuated valves Praher Type T4 Pneumatically Actuated Diaphragm Valve Descripti: In-line pneumatically operated diaphragm valve Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Fluid Temperature Range: 0 C-80 C Cstructi: Body: Polypropylene Seals: EPDM, FPM or PTFE (EPDM backed) End Cnectis: Fusi Spigots, Flanged BS4504 EN1072 PN10, Fusi Socket Unis Actuati: Housing Material: Glass reinforced polypropylene Air Actuators: Fail-safe close, fail-safe open Protecti: IP65 Manual Override: Included Positi Indicator: Included Ctacts: Optial Pilot Valve: Solenoid, not included MM Fusi Spigots MM Fusi Spigots Fail-safe Close EPDM Diaphragm 20 12 5679 202.61 25 12 5681 207.41 32 12 5683 294.36 40 12 5685 364.56 50 12 5687 364.56 63 12 5689 453.88 Fail-safe Close PTFE Diaphragm 20 12 5680 212.98 25 12 5682 217.78 32 12 5684 307.89 40 12 5686 400.43 50 12 5688 413.21 63 12 5690 508.92 Flanged PN10 Flanged PN10 Fail-safe Close EPDM Diaphragm 20 12 5722 236.93 25 12 5724 241.69 32 12 5726 307.89 40 12 5728 400.43 50 12 5730 413.21 63 12 5732 483.16 Fail-safe Close PTFE Diaphragm 20 12 5723 247.28 25 12 5725 252.07 32 12 5727 328.66 40 12 5729 417.98 50 12 5731 459.47 63 12 5733 559.17 MM Fusi Spigots MM Fusi Spigots Fail-safe Open EPDM Diaphragm 20 12 5679 FSO 202.61 25 12 5681 FSO 207.41 32 12 5683 FSO 294.36 40 12 5685 FSO 364.56 50 12 5687 FSO 364.56 63 12 5689 FSO 453.88 Fail-safe Open PTFE Diaphragm 20 12 5680 FSO 212.98 25 12 5682 FSO 217.78 32 12 5684 FSO 307.89 40 12 5686 FSO 400.43 50 12 5688 FSO 413.21 63 12 5690 FSO 508.92 Flanged PN10 Flanged PN10 Fail-safe Open EPDM Diaphragm 20 12 5722 FSO 236.93 25 12 5724 FSO 241.69 32 12 5726 FSO 307.89 40 12 5728 FSO 400.23 50 12 5730 FSO 413.21 63 12 5732 FSO 483.16 Fail-safe Open PTFE Diaphragm 20 12 5723 FSO 247.28 25 12 5725 FSO 252.07 32 12 5727 FSO 328.66 40 12 5729 FSO 417.98 50 12 5731 FSO 459.47 63 12 5733 FSO 559.17 Requires pilot valve - enquire for details. 285

pressure reducing valves The functi of a pressure reducing valve A pressure reducing valve is installed in-line. It is respsible for maintaining the downstream line pressure to the pressure set at the valve. The valve works by respding to changes in the downstream pressure. For example, assume that there are normally two open valves downstream from the pressure regulator. When e is closed, the back pressure will increase. As this happens, the pressure reducing valve would close down to maintain the downstream pressure. When the valve is re-opened the pressure reducing valve would also open up again until the set pressure was reached. Under operating cditis the pressure reducing valve is always open which means that it is balanced between the inlet pressure (primary side) and the lower outlet/working pressure. At any rise of working pressure at the valve outlet a pressure compensati via the ctrol bore takes place at the area below the diaphragm. The higher working pressure activates the large diaphragm and lifts the pist against the spring force. The flow reduces and the working pressure drops until the balanced cditi is reached again. When the working pressure drops this procedure is reversed. The spring force opens the valve seat against the lower pressure force below the diaphragm. The flow rises until the balanced cditi is reached again. Pre-setting or re-adjustment of the valve set pressure is made by removing the protective cap and by setting the ctrol screw. The counter nut is tightened after final adjustment. When used with neutral fluids, many of the pressure relief valves can be fitted with a pressure gauge if required. Applicatis for Pressure Reducing Valves 286

pressure reducing valves ASV Stubbe Type 755 Pressure Reducing Valve Descripti: In-line adjustable valve used to reduce system pressures and to keep the working pressure cstant Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Pressure Setting Range: 1 to 9 bar Hysteresis: Approx. 0.1 to 0.4 bar Fluid Temperature Range: 0 C-70 C Cstructi: Body: Polypropylene Diaphragm: EPDM with PTFE liner fluid side Seats and Seals: EPDM or FPM End Cnectis: Uni fusi sockets or fusi spigots Features: Adjustable at any time, even during use. Cstant pressure ctrol to ± 0.2 bar. Vibrati free during operati. Installati is independent of flow directi. Optis: A pressure gauge can be fitted the primary or also the secdary side. Setting Range - 1 to 9 bar MM Uni Fusi Sockets MM Uni Fusi Sockets 16 1193 14 403.61 20 1193 15 406.01 25 1193 16 532.06 32 1193 17 536.85 40 1193 18 632.57 50 1193 19 646.12 63 1193 20 669.26 16 1193 21 412.41 20 1193 22 432.34 25 1193 23 545.60 32 1193 24 548.79 40 1193 25 655.70 50 1193 26 671.63 63 1193 27 696.38 MM Fusi Spigots MM Fusi Spigots 16 1220 62 377.33 20 1220 63 377.33 25 1220 64 499.57 32 1220 65 499.57 40 1220 66 585.85 50 1220 67 585.85 63 1220 68 585.85 16 1220 69 383.28 20 1220 70 383.28 25 1220 71 506.39 32 1220 72 506.39 40 1220 73 596.45 50 1220 74 596.45 63 1220 75 596.45 Our expert team are here to help. Call our freephe: Need advice? 0800 975 79 71 Or from outside of the UK: +44 191 521 3111 287

pressure reducing valves ASV Stubbe Type 765 Pressure Reducing Valve Descripti: In-line adjustable valve used to reduce system pressures and to keep the working pressure cstant Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Pressure Setting Range: 0.5 to 9 bar Hysteresis: Approx. 0.1 to 0.4 bar Fluid Temperature Range: 0 C-70 C Cstructi: Body: Polypropylene Diaphragm: EPDM with PTFE liner fluid side Seats and Seals: EPDM or FPM End Cnectis: Uni fusi sockets or fusi spigots Features: Adjustable at any time, even during use. Cstant pressure ctrol to ± 0.2 bar. Vibrati free during operati. Installati is independent of flow directi. Optis: A pressure gauge can be fitted the primary or also the secdary side. Setting Range - 0.5 to 9 bar MM Uni Fusi Sockets MM Uni Fusi Sockets 16 1193 56 420.40 20 1193 57 421.97 25 1193 58 547.22 32 1193 59 551.21 40 1193 60 643.73 50 1193 61 658.11 63 1193 62 681.21 16 1193 63 427.55 20 1193 64 432.34 25 1193 65 559.98 32 1193 66 563.97 40 1193 67 666.08 50 1193 68 682.02 63 1193 69 707.54 MM Fusi Spigots MM Fusi Spigots 16 1221 04 393.12 20 1221 05 393.12 25 1221 06 513.89 32 1221 07 513.89 40 1221 08 597.09 50 1221 09 597.09 63 1221 10 597.09 16 1221 11 398.40 20 1221 12 398.40 25 1221 13 520.59 32 1221 14 520.59 40 1221 15 606.89 50 1221 16 606.89 63 1221 17 606.89 288

pressure reducing valves ASV Stubbe Type 750 Pressure Reducing Valve Descripti: In-line adjustable valve used to reduce system pressures and to keep the working pressure cstant Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Pressure Setting Range: 1 to 6 bar Hysteresis: Approx. 0.1 to 0.4 bar Fluid Temperature Range: 0 C-70 C Cstructi: Body: Polypropylene Diaphragm: EPDM with PTFE liner fluid side Seats and Seals: EPDM or FPM End Cnectis: Fusi spigots Features: Adjustable at any time, even during use. Cstant pressure ctrol to ± 0.2 bar. Installati is independent of flow directi. Setting Range - 1 to 6 bar MM Fusi Spigots 75 1111 76 1839.18 90 1111 77 4365.28 D t know how to use a product? Give our expert team a call: 0800 975 79 71 Or from outside of the UK: +44 191 521 3111 289

pressure relief valves The functi of a pressure relief valve A pressure relief valve is most often used to protect a system from over-pressurisati, but it can also be used to maintain a cstant upstream pressure or even as a n-return valve in certain installatis. Not normally installed as an in-line valve, it ly opens when the system pressure exceeds the pressure set against the diaphragm of the valve. When this happens, the excess pressure forces the valve pist off its seat, compressing the spring and allowing fluid to flow through the valve body to discharge. Damping at the valve pist suppresses vibrati and fluttering. The pre-formed diaphragm allows full opening of the valve whilst separating the fluid in the lower body from the bnet and therefore the atmosphere. The seal is additially secured by crimped seal O- rings at the diaphragm. When the system pressure falls back to below the set pressure, the spring forces the pist back into the seat, closing the valve. Pre-setting or re-adjustment of the valve set pressure is made by removing the protective cap and by setting the ctrol screw. The counter nut is tightened after final adjustment. When used with neutral fluids, many of the pressure reducing valves can be fitted with a pressure gauge if required. For Pressure Relief Valve Applicatis See Page 148 ASV Stubbe Type 712-R Pressure Relief and N-Return Valve Descripti: Adjustable pressure relief and overflow valve, back-pressure safe Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Pressure Setting Range: 0.3 to 10 bar Opening Pressure: Approx. 0.5 bar Hysteresis: Approx. 0.3 bar Fluid Temperature Range: 0 C-70 C Cstructi: Body: Polypropylene Diaphragm: EPDM with PTFE liner fluid side Seats and Seals: EPDM or FPM End Cnectis: Uni fusi sockets or fusi spigots Features: Unique design: valve acts as a n-return valve if there is no pressure the inlet side. Adjustable at any time, even during use. Vibrati free during operati. Maintenance free. High reproducability, low hysteresis. Optis: A pressure gauge can be fitted the primary or also the secdary side. Setting Range - 0.3 to 10 bar MM Uni Fusi Sockets MM Uni Fusi Sockets 16 1206 74 214.58 16 1206 81 218.56 20 1206 75 217.78 20 1206 82 223.35 25 1206 76 301.52 25 1206 83 310.30 32 1206 77 306.33 32 1206 84 315.09 40 1206 78 387.67 40 1206 85 407.62 50 1206 79 401.25 50 1206 86 423.58 63 1206 80 425.99 63 1206 87 452.29 MM Fusi Spigots MM Fusi Spigots 16 1218 94 193.85 20 1218 95 193.85 25 1218 96 275.99 32 1218 97 275.99 40 1218 98 350.99 50 1218 99 350.99 63 1219 00 350.99 16 1219 01 196.22 20 1219 02 196.22 25 1219 03 279.97 32 1219 04 279.97 40 1219 05 361.36 50 1219 06 361.36 63 1219 07 361.36 290

pressure relief valves ASV Stubbe Type 712 Pressure Relief Valve Descripti: Adjustable pressure relief valve Mounting: In any positi Maximum Fluid Pressure at 20 C: Sizes 75mm & 90mm: 10 bar; 110mm: 6 bar Pressure Setting Range: Choice of 0.3 to 4 bar, 0.5 to 6 bar or 0.5 to 10 bar Opening Pressure: Approx. 0.3 to 0.5 bar Hysteresis: Maximum approx. 1 bar Fluid Temperature Range: 0 C-70 C Cstructi: Body: Polypropylene Diaphragm: EPDM with PTFE liner fluid side Seats and Seals: EPDM or FPM End Cnectis: Fusi spigots Features: Adjustable at any time, even during use. Vibrati and flutter free during operati. Maintenance free. Setting Range 0.3 to 4 bar MM Fusi Spigots MM Fusi Spigots 75 1105 46 1202.70 90 1105 49 1904.57 110 1129 27 2885.75 75 1129 21 1323.70 90 1129 24 2094.48 110 1129 30 3174.32 Setting Range 0.5 to 6 bar Setting Range 0.5 to 10 bar MM Fusi Spigots MM Fusi Spigots 110 1118 57 2885.75 75 1100 61 1202.70 90 1100 64 1904.57 110 1129 33 3174.32 MM Fusi Spigots MM Fusi Spigots 75 1129 12 1323.70 90 1129 15 2094.48 ASV Stubbe Type 718 Pressure Relief Valve Descripti: Adjustable pressure relief valve Mounting: In any positi Maximum Fluid Pressure at 20 C: 10 bar Pressure Setting Range: 0.5 to 10 bar Opening Pressure: Approx. 0.5 bar Fluid Temperature Range: 0 C-70 C Flow Rate: Up to 500 l/hr Setting Range - 0.5 to 10 bar Cstructi: Body: Polypropylene Diaphragm: EPDM with PTFE liner fluid side Seats and Seals: EPDM or FPM End Cnectis: Uni fusi sockets Features: Ideal for oscillating pumps. Adjustable at any time, even during use. Vibrati and flutter free during operati. Diaphragm ctrolled, insensitive to backpressure. Installati is independent of flow directi. MM Uni Fusi Sockets Ideal for Oscillating Pumps Size 12mm MM Uni Fusi Sockets 12 1471 60 139.76 12 1471 68 143.42 MM Fusi Spigots 16 1468 89 161.83 20 1468 90 161.83 25 1468 91 230.93 32 1468 92 230.93 40 1468 93 306.93 50 1468 94 306.93 63 1468 95 306.93 Sizes 16-63mm 291