SERIES 5025 6030 7530 10030 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of 0.001 in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Infinitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.
TECHNICAL SPECIFICATIONS DESCRIPTION UOM 5025 6030 7530 10030 CAPACITY Working Surface of the Table 500 x 250 x 750 x 1000 x Max. Job size that can be Ground 500 x 250 x 750 x 1000 x Max. Longitudinal Travel 550 650 1050 Max. Cross Traverse 280 800 330 Electro-Magnetic Chuck 500 x 250 750 x 1000 x Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table 380 415 x 525 360 SPEEDS & FEEDS Table Speed (Infinitely variable) m/min 5-30 Power Cross traverse (Variable) /min 120-1200 /stroke 1-25 0.01 Auto cross feed at each table reversal (Variable) Cross feed Graduation Vertical feed Power Elevation /min Vertical feed graduation (MPG) 0.001 Vertical In Feed Amount (Settable) 0.001 to 0.099 GRINDING HEAD Speed of Grinding Spindle Rpm 2800 1400 200 x 20 x 50.8 x 25 x 76.2 (Optional x 40 x 76.2) 3 / 2.2 Size of Grinding wheel (D x W x B) Power of Grinding wheel HYDRAULIC SYSTEM Working Pressure Kg/cm^2 12 Solenoid operated hydraulic power pack with facility to have soft table reversals. 2 / 1.47 Liters 120 Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor Tank Capacity GENERAL 8/6 Net weight of Machine (Approx.) 2000 2450 2550 2900 Gross weight of Machine (Approx.) 2550 3050 3150 3550 10 / 7.5 MACHINE DIMENSIONS Elevation View Top View MACHINE MODEL A B C D E 5025 2350 2900 2585 1800 6030 2500 3200 2585 1900 7530 2500 3400 2585 1900 10030 3200 3700 2585 1900 OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, specifications, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic 93274 91973 Total Power
SERIES 8040 6040 8040 10040 10050 15050 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of 0.001 in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Infinitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.
TECHNICAL SPECIFICATIONS DESCRIPTION UOM 6040 Working Surface of the Table x 400 800 x 400 1000 x 400 1000 x 500 1500 x 500 Max. Job size that can be Ground x 400 800 x 400 1000 x 400 1000 x 500 1500 x 500 Max. Longitudinal Travel 650 1050 1050 Max. Cross Traverse 850 440 Electro-Magnetic Chuck x 400 800 x 400 525 1000 x 400 Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table 390 440 460 8040 10040 10050 15050 CAPACITY 1550 550 1000 x 500 1500 x 500 525 (Optional - 750) 580 820 x 50 x 76.2 350 x 50 x 127 SPEEDS & FEEDS Table Speed (Infinitely variable) m/min 5-30 Power Cross traverse (Variable) /min 120-1200 /stroke 1-25 0.01 Auto cross feed at each table reversal (Variable) Cross feed Graduation Vertical feed Power Elevation /min Vertical feed graduation (MPG) 0.001 Vertical In Feed Amount (Settable) 0.001 to 0.099 Rpm 1400 GRINDING HEAD Speed of Grinding Spindle Size of Grinding wheel (D x W x B) Power of Grinding wheel x 40 x 76.2 7.5 / 5.5 HYDRAULIC SYSTEM Working Pressure Kg/cm^2 14 Solenoid operated hydraulic power pack with facility to have soft table reversals. Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor 3 / 2.2 Liters 150 200 Tank Capacity GENERAL 11 / 8 16 / 12 Net weight of Machine (Approx.) 4050 4200 4450 5100 6550 Gross weight of Machine (Approx.) 4700 4900 5200 5900 7500 MACHINE DIMENSIONS Elevation View Top View MACHINE MODEL A B C D E 6040 2500 3400 2150 8040 3 3800 2150 10040 3400 4000 2150 10050 4000 4800 2 15050 6100 6100 2 OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, specifications, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic 93274 91973 Total Power
SERIES 10060 15060 20060 60 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of 0.001 in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Infinitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.
TECHNICAL SPECIFICATIONS DESCRIPTION UOM 10060 15060 20060 60 CAPACITY Working Surface of the Table 1000 x 1500 x 2000 x 0 x Max. Job size that can be Ground 1000 x 1500 x 2000 x 0 x Max. Longitudinal Travel 1050 1550 2050 3100 Max. Cross Traverse Electro-Magnetic Chuck Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table 655 1000 x 1500 x 525 (Optional - 750) 2 Nos. 1000 x 2 Nos. 1500 x 740 980 1200 1550 750 SPEEDS & FEEDS Table Speed (Infinitely variable) m/min Power Cross traverse (Variable) /min 120-1200 /stroke 1-25 0.01 Auto cross feed at each table reversal (Variable) Cross feed Graduation 5-30 7-30 /min Vertical feed graduation (MPG) 0.001 Vertical In Feed Amount (Settable) 0.001 to 0.09 Rpm 1400 Vertical feed Power Elevation GRINDING HEAD Speed of Grinding Spindle Size of Grinding wheel (D x W x B) Power of Grinding wheel 350 x 50 x 127 400 x 50 x 127 400 x 65 x 127 7.5 / 5.5 10 / 7.5 15 / 11 HYDRAULIC SYSTEM Working Pressure Kg/cm^2 15 20 Solenoid operated hydraulic power pack with facility to have soft table reversals. Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor 3 / 2.2 Liters 150 200 250 400 Tank Capacity GENERAL 15 / 11 17 / 12 20 / 15 24 / 18 Net weight of Machine (Approx.) 5450 6900 7 9200 Gross weight of Machine (Approx.) 6 7750 8500 10 MACHINE DIMENSIONS Elevation View Top View MACHINE MODEL A B C D E 10060 4000 4500 15060 6100 6100 20060 6200 6200 60 9000 9000 OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, specifications, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic 93274 91973 Total Power
SERIES 20070 70 15080 20080 80 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of 0.001 in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Infinitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.
TECHNICAL SPECIFICATIONS UOM 20070 70 15080 20080 80 Working Surface of the Table 2000 x 700 0 x 700 1500 x 800 2000 x 800 0 x 800 Max. Job size that can be Ground 2000 x 700 0 x 700 1500 x 800 2000 x 800 0 x 800 Max. Longitudinal Travel 2050 3100 1 2100 3100 Max. Cross Traverse 750 765 Electro-Magnetic Chuck Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table DESCRIPTION CAPACITY 880 2 Nos. 1000 x 700 2 Nos. 1500 x 700 1500 x 800 2 Nos. 1000 x 800 2 Nos. 1500 x 800 750 1 1 1100 1500 2100 SPEEDS & FEEDS Table Speed (Infinitely variable) m/min 7-30 Power Cross traverse (Variable) /min 120-1200 /stroke 1-25 0.01 Auto cross feed at each table reversal (Variable) Cross feed Graduation Vertical feed Power Elevation /min Vertical feed graduation (MPG) 0.001 Vertical In Feed Amount (Settable) 0.001 to 0.099 Rpm 1400 GRINDING HEAD Speed of Grinding Spindle Size of Grinding wheel (D x W x B) Power of Grinding wheel 400 x 50 x 127 10 / 7.5 400 x 80 x 127 400 x 65 x 127 15 / 11 20 / 15 HYDRAULIC SYSTEM Working Pressure Kg/cm^2 20 Solenoid operated hydraulic power pack with facility to have soft table reversals. Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor Tank Capacity 7.5 / 5.5 Liters 250 400 400 500 GENERAL 20 / 15 25 / 19 27 / 20 30 / 23 37 / 28 Net weight of Machine (Approx.) 8 9900 7900 10 13500 Gross weight of Machine (Approx.) 9250 10850 8950 11500 14950 MACHINE DIMENSIONS Elevation View MACHINE MODEL Top View A B C D E 20070 6200 0 70 9000 0 15080 6 2800 3 20080 6500 2800 3 80 9 2800 3 OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, specifications, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic 93274 91973 Total Power