Locks. Call from anywhere in Canada - Locking Systems - Overview...493

Locking Systems - Overview...493 Lever Bit/Skeleton Keys and Accessories...494 496 Symo 3000 Locking System...497 511 Cylinder Module System...512 529 Cam Locks...516, 530, 537, 541, 543 Deadbolt Locks...514 515, 519, 531 5, 542 Sliding Door Locks...533, 538, 547 548 Central Locking System...520 524, 534 536 High Security Locks...538 546 Glass Door Locks...517 518, 549 550 491

Espagnolette Locks...551 553 Push-button Locks...534, 536, 538, 554 558 Combination Locks...559 560 Strike Plates, Bolts, Locking Strips...562 565 Electronic Furniture Locking Systems...566 581 492

Locking Systems - Overview Häfele offers you a comprehensive range of locking technology solutions for every installation situation, from locks with lever bit keys to Dialock electronic locking systems. Choose the lock type according to your individual requests: security, economic efficiency or design. Locks Mechanical Locking Systems: Locks with Lever Bit Keys Key changes: 1 Push Button Locks Locks with lever bit keys are often used where visual attractiveness is more of an issue than safety. Due to the great choice of decorative keys available in different designs and materials, the appearance of the lock can be adapted to the furniture. Well suited for the recreation or boating industry, these locks operate by push button, without a key. All push button locks can be used in wet areas. When locked there is no protrusion of the knob. Cylinder with Plate Levers Key changes: 100-500 Combination Locks Häfele plate cylinders are a simple and economic solution for many applications. Locks with plate cylinders are available with up to 500 key changes with suitable master keys. Häfele offers you a multitude of locks with fixed plate cylinders as well as removable plate cylinders for the cylinder module systems. Combination locks are suitable for safe deposit boxes, lockers, changing rooms and wardrobes. Locks with Pin Tumbler Cylinder Key choices: 850-20,000 Where safe locking is an important issue (e.g. office buildings, store fixtures, or hospitals) locks with pin tumbler cylinders are the ideal solution. Electronic Locking System Dialock Key changes: Dialock is a contact-less operating identification and locking system. It completely replaces the combination of mechanical key and lock. There are Dialock locks for furniture which are compatible with complete program solutions for hotels, condos, hospitals, retail stores, etc. 493

Escutcheons 22 22 18 6 Material: zinc with fixing disc gold coloured polished 181.07.803 Packing: 25 pcs. 22 22 18 6 Material: zinc with fixing disc bronzed and brushed 181.07.107 Packing: 25 pcs. 20 6 Material: zinc with fixing disc 18 nickel-plated matt 182.19.602 Packing: 25 pcs. 10 Material: brass with fixing disc 6 20 brushed 185.10.524 Packing: 100 pcs. 13 4 Material: brass with fixing disc 23 brushed 185.30.839 Packing: 100 pcs. 21 4 46 Material: brass polished 118.20.885 Packing: 25 pcs. (includes #4 mounting screws) 494

Decorative Keys Lever Bit The desired key must match the type of lock selected in terms of: a) bit size and shape b) length of shank 8 6 Effective shank length Bit dimensions 8 6 Effective shank length: 38 mm Material: zinc, die-cast brass polished 200.68.580 burnished brown 200.68.188 Packing: 100 pcs. Bit dimensions 8 6 Effective shank length: 38 mm Material: zinc, die-cast brass polished 201.88.587 Packing: 100 pcs. 495 Bit dimensions Bit dimensions 8 8 6 6 Effective shank length: 38 mm Material: zinc, die-cast brass polished 200.58.584 burnished brown 200.58.182 Packing: 100 pcs. Effective shank length: 50 mm Material: zinc, die-cast brass-plated polished 200.66.586

English Locks Lever Bit Small size, ideal for jewelry boxes etc. With screw-mounted locking strike plate Half-Mortise Lock with Lever Bit Key 29 18 22 44 Backset 11 mm Keyed alike Material: Lock: brass Key: malleable iron, plated Strike plate: brass Packing: 20 pcs. 218.35.129 5.5 7 11 16 5 #5 Spare key Packing: 20 pcs. 209.99.610 Half-Mortise Lock with Lever Bit Key 22 35 15 21.5 25.5 7 7.5 6.0 51 #5 Backset 15 mm Keyed alike Material: Lock: brass Key: malleable iron, plated Strike plate: brass 218.35.156 Packing: 20 pcs. (1 pc. = 1 lever bit key and strike plate) Spare key 209.99.620 Packing: 20 pcs. Flat head screws pages 302 304 496

SYMO 3000 Locking System Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The locking system SYMO 3000 is based on the principle to separate lock, body and cylinder core. Due to the multitude of components within the SYMO 3000 system, all present and future applications can be covered with maximum freedom during planning and execution. All components within the SYMO 3000 system can be combined at random and each component can be exchanged, modified or upgraded at any time. Locking plans can be modified easily and at minimum costs. Only the cylinder core is replaced (without tools), the lock and the piece of furniture remain untouched. One lock for all cases SYMO 3000 offers the whole range of locking technology for furniture: From rim locks to inlaid locks, from espagnolette locks to central locking systems, from glass door locks to roller shutter locks. All components can be combined at random. In order to cover any desire conceivable today and in the future, the SYMO 3000 is constantly developed and extended by new types of locks. Efficient furniture production Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the desired removable core cylinders at any time. The furniture can be produced independently from its future use and from the required locking plans, and can be equipped with the desired locks. The result is efficient mass production. The individual locks can be integrated into the locking plan by inserting the removable cores at any time, even after the furniture is set up. Locking plan - simple and easy SYMO 3000 enables setting up simple as well as highly complex master key locking systems. The locking plan is put into practice by simply inserting the cylinder cores at any time independent of the production, delivery, or set up of the furniture. In addition, the locking plan can also be modified and extended at any time. Every modification can be implemented easily and economically by exchanging the SYMO 3000 cylinder cores. 497

SYMO 3000 Locking System Information Plate cylinder or pin-tumbler cylinder? With the SYMO 3000 locking system, you have a choice between plate cylinders and pin-tumbler cylinders. Plate cylinder The plate cylinder removable cores of the SYMO 3000 system offer a simple and economical solution with the convenience of removable cylinders. The plate cylinder is available with up to 3,000 different key changes and the suitable master keys. Removable core cylinders mounted without tools Tools are not required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder core can only be inserted or taken out when the lock is in an unlocked position. Do not treat the cylinder cores with graphite. Mounting plate cylinder removable cores Inserting the cylinder core Pin-tumbler cylinder Where safe locking is an important issue (e.g. in office buildings or hospitals), the SYMO 3000 STW is a good option. Remove the protective cap from the cylinder housing Push the cylinder core with the inserted key into the cylinder housing With its compact design and six pairs of pins, it offers up to 20,000 different key changes. Häfele is the only supplier in the world offering the removable core pin-tumbler cylinder with a reversible key, ensuring the highest possible comfort in locking. Engage the cylinder core with slight pressure Removing the cylinder core Identical drilling dimenison for all lock versions The uniform cylinder housing diameter of 18 mm (19 mm including rosette) allows a uniform drilling size for all locks within the locking system. Insert the removal key into the cylinder core Mounting pin-tumbler cylinder removable cores Inserting the cylinder core Take the cylinder core out of the cylinder housing using the removal key 18 mm without rosette 18 mm with rosette One protective cap, several functions The protective caps of the SYMO 3000 locks shield the interior of the cylinder housing from dirt or damage during construction phase. Due to their design, they also function as building site keys and allow lock operation with a coin or screwdriver. After construction is completed, the protective caps can be removed easily without tools and replaced by the desired cylinder cores. Remove the protective cap from the cylinder housing Removing the cylinder core Insert the removal key into the cylinder core Insert the cylinder core into the cylinder housing and engage it with slight pressure Take the cylinder core out of the cylinder housing using the removal key and applying slight counterpressure 498

SYMO 3000 Dead Bolt Rim Lock Backset 23 mm, long bolt travel, screw-mounted 20 816 4 3.5 24 D 40 Ø18 18.5 40 10 Cylinder housing length For cylinder cores that are inserted from the front on site Backset D: 23 mm Bolt travel: 24 mm Material: zinc, die-cast #6 Locking direction Cylinder housing length Nickel-plated left 22 2.25.610 right 22 2.25.600 drawer version 22 2.25.620 2.25.680 Backset 25 mm, short bolt travel, screw-mounted 2.5 3.5 42 Ø18 42 8 Cylinder housing length For cylinder cores that are inserted from the front on site Backset D: 25 mm Bolt travel: 8 mm #6 Material: zinc, die-cast Locking direction Cylinder housing length left 22 nickel-plated 2.26.610 black 2.26.310 right 22 nickel-plated 2.26.600 black 2.26.300 drawer 22 nickel-plated 2.26.620 version black 2.26.0 nickel-plated 2.26.680 black 2.26.380 With adjustable backset, screw-mounted 499 16 2.5 3 8 D 47 57 Ø18 42 8 22 For cylinder cores that are inserted from the front on site Backset D: 15-40 mm (adjustable in steps of 5mm) #6 Material: zinc, die-cast nickel-plated 2.26.690 Flat head screws pages 302 304

SYMO 3000 Dead Bolt Rim Lock With extended cylinder housing, screw-mount For cylinder cores that are inserted from the front on site. 10.5 42 20 20 42 D 13 Backset D: 25 mm Cylinder housing length: 45 mm Material: zinc, die-cast Locking direction #6 Nickel-plated left 2.26.612 right 2.26.602 drawer version 2.26.622 45 7.5 4 Ø18 7.5 10.5 42 4 20 20 42 D 13 22.5 Backset D: 25 mm Material: zinc, die-cast #6 Locking direction Version Nickel-plated left with locked bolt 2.37.621 without locked bolt 2.37.624 right with locked bolt 2.37.620 without locked bolt 2.37.623 drawer version with locked bolt 2.37.622 without locked bolt 2.37.625 Ø18 Flat head screws pages 302 304 500

SYMO 3000 Dead Bolt Rim Lock With extended cylinder housing, screw-mount For cylinder cores that are inserted from the front on site. Backset D: 25 mm Cylinder housing length: 22 mm Material: zinc, die-cast Locking direction nickel-plated left 2.29.610 right 2.29.600 #6 Lock handle, screw-mount For SYMO 3000 dead bolt rim lock, with extended cylinder housing. 144 23.8 26 Material: zinc, die-cast #6 nickel-plated 2.26.699 M4 8 Striking plate, screw-mount For SYMO 3000 dead bolt rim lock. 42 2 Installation 14 nickel-plated 2.37.991 501 25 25 4.5 10 3.5 3.5 13 Flat head screws pages 302 304

SYMO 3000 Striking plate, screw-mount 15 9 3 55 22 40 1 18.5 #6 Material: zinc, die-cast Finish nickel-plated 2.37.990 Roller shutter rim lock, screw-mount 16 3 60 19 44 2 7 13.5 42 3.5 24.5 42 4 8 For cylinder cores that are inserted from the front on site Backset D: 25 mm Drawer version locking direction #6 Material: zinc, die-cast Finish nickel-plated 2.30.620 (includes 1 strike plate) 2.5 2 Ø18 Striking plate, for SYMO 3000 roller shutter rim lock, screw-mount 60 16 7 19 44 3 2 Dimensions: 60 x 16 x 2 mm Material: zinc, die-cast #6 Finish nickel-plated [233.30.990] Text Change Hook bolt mortise lock, recess or screw-mount 14 3 2 13 D Flat head screws pages 302 304 67 76 30 13 40 Ø18 23 24 10 46 5 2 For cylinder cores that are inserted from the front on site Backset D: 22.5 mm Right locking direction Material: zinc, die-cast Finish 3 1 4 Installation 1. Insert the cylinder core. 2. Insert the lock case into the door. 3. Insert the cylinder housing through the drill hole. 4. Turn the cylinder housing slightly to the left. 5. Screw in the safety screw. #6 nickel-plated 2.36.600 nickel-plated 230.36.600 (includes 1 cylinder housing and 1 striking plate) The cylinder housing is now firmly fixed to the lock case. 502

SYMO 3000 Inlaid lock, screw-mount 16 For cylinder cores that are inserted from the front on site. Backset D: 25 mm 8 40 D 7 Material: zinc, die-cast Drawer version nickel-plated 230.28.620 Packing: 1 or 20 pcs. #6 2.5 3 22 Ø18 Inlaid flap lock, screw-mount For cylinder cores that are inserted from the front on site. 10 2 3 35 4 Material: zinc, die-cast Drawer version nickel-plated 219.20.600 #6 26 Ø18 5 Cam lock, with mounting plate, screw-mount 503 15 4 2 21 18 Ø18 42 3 22 For cylinder cores that are inserted from the front on site. Straight cam For door thickness: max. 22 mm Closure direction: 180 (convertible) #5 Material: zinc, die-cast Closure direction A (D, F, G) nickel-plated 235.59.600 black 235.59.300 B (C, E, H) nickel-plated 235.59.610 black 235.59.310 (includes 1 locking cam, 1 fixing screw and 1 washer, pre-mounted) Flat head screws pages 302 304

SYMO 3000 Cam lock, nut attachment 15 2.2.5 2.23 (28) 1 4.5 35 43 Drilling pattern Ø24 16 29 Door thickness 19 30 (35) For cylinder cores that are inserted from the front on site Straight cam For door thickness: max. 17 mm or 22 mm Closure direction: 180 (convertible) Installation: screw-mount with hexagon nut Material: zinc, die-cast Door thickness mm Closure direction nickel-plated, polished 17 A (D, F, G) 235.88.600 B (C, E, H) 235.88.610 22 A (D, F, G) 235.88.620 B (C, E, H) 235.88.630 Packing: 1 or 20 pcs. (includes 1 locking cam, 1 mounting nut (pre-mounted) and 1 retaining washer) Cam lock, nut attachment with cranked cam 14 15 11.5 2.2.5 1 4.5 35 Drilling pattern 43 Ø24 16 29 Door thickness 30 19 For cylinder cores that are inserted from the front on site Cranked cam For door thickness: max. 17 mm Closure direction: 180 (convertible) Installation: screw-mount with hexagon nut Material: zinc, die-cast Closure direction nickel-plated, polished A (D, F, G) 235.88.820 B (C, E, H) 235.88.830 Packing: 1 or 20 pcs. (includes 1 locking cam, 1 mounting nut (pre-mounted) and 1 retaining washer, galvanized steel) Cam lock, nut attachment with hook cam 30 24 15.5 0.5 6.5 2.2.5 23 15 Steel clip, for cam locks with nut attachment 11 6 18.5 1 4.5 33 Drilling pattern 40 Ø24 16 Notch for steel clip Drilling pattern 29 19 30 Door thickness 19 16 For cylinder cores that are inserted from the front on site Straight hook cam For door thickness: max. 17 mm Closure direction: 180 (convertible) Installation: screw-mount with hexagon nut Material: zinc, die-cast Closure direction nickel-plated, polished A (D, F, G) 235.88.720 B (C, E, H) 235.88.730 Packing: 1 or 20 pcs. (includes 1 locking cam, 1 mounting nut (pre-mounted) and 1 retaining washer) For mounting cam locks on metal doors, and as additional protection against twisting Straight hook cam For sheet thickness: 0.8-1.5 mm nickel-plated 235.88.990 Packing: 1 or 20 pcs. 504

SYMO 3000 Locking cam, straight 15 9 2.2.5 Length yellow, chromated 43 235.88.980 48 235.88.982 Locking cam, cranked Length: 45 mm 45 16 9 galvanized 235.88.981 2.2.5 Hook cam Length: 40 mm 15 48 9 yellow, chromated 235.88.983 2.2.5 Glass door lock for hinged doors 26 For cylinder cores that are inserted from the front on site For glass door thickness: 4-6 mm Installation: 40 mm 8 Ø5 Ø30 20 12 9 29 Material: zinc, die-cast nickel-plated polished 233.43.700 brass-plated polished 233.43.500 nickel-plated matt 233.43.600 (includes 3 rubber disks and 2 threaded screws) 505

SYMO 3000 Installation 125 100 10 28 6 21 Ø18 Glass door lock, for sliding doors For cylinder cores that are inserted from the front on site For glass door thickness: 4-7 mm Rack clips on, cylinder slides onto rack Material: Housing: zinc, die-cast; Rack: stainless steel Finish nickel-plated matt 233.44.200 nickel-plated matt 233.44.600 Packing: 1 pc 16 30 Installation 1 26 42 23.5 28 2.5 21 10 25 26 2.5 1 29 5 24 6 Overlay mounting Inset mounting 26 Glass door cam lock, screw-mounted 15 For cylinder cores that are inserted from the front on site For glass door thickness: 4-10 mm Straight cam Closure direction: 180 (convertible) Text [ Handing: left or right versions] Change 2 Material: zinc, die-cast Finish [Handing] nickel-plated left 233.42.600 polished right 233.42.610 brass-plated left 233.42.500 polished right 233.42.510 nickel-plated left 233.42.700 matt right 233.42.710 (includes 1 locking cam, 1 mounting nut, 1 angled striking plate, 1 clamping plate, 1 clamping rosette) 506

SYMO 3000 Counterpiece, for glass door cam lock Installation 3 56 5 5 Ø25.5 23.5 30 25 2.5 26 13 1 26 26 30 26 26 Ø25.5 26 M6 1 26 26 Application Where glass double doors are used together with the counterpiece, the following closure directions of the glass door cam lock are required. 10 6 42 8 26 26 Counterpiece double doors For glass thicknesses: 4-10 mm Rack clips on, cylinder slides onto rack Material: Housing: zinc, die-cast; Rack: stainless steel nickel-plated polished 233.40.712 brass-plated polished 233.40.810 nickel-plated matt 233.40.610 Packing: 1 or 20 pcs. Push and turn lock, screw-mount 18 3 7.5 Function The rotary bolt protects high sliding doors from being pushed in. The lock can only be locked and unlocked with the key. 50 38.5 25 For cylinder cores that are inserted from the front on site Closure direction: 180 Installation 7 9.5 Closure direction A (right) Ø18 4 Material: zinc, die-cast Locking direction nickel-plated closure direction A 234.67.610 closure direction B 234.67.660 Packing: 1 or 20 pcs. 9.5 Angled striking plate, for push and turn lock screw-mount 507 7 Closure direction B (left) 1.5 40 5 21 8 18 11 #6 galvanized 239.01.910 Packing: 1 or 20 pcs. Flat head screws pages 302 304

SYMO 3000 #6 Push-button cylinder 18 50 Ø7 3 38.5 Ø18 10 25 5.5 For cylinder cores that are inserted from the front on site Closure direction: 180 With internal M5 thread in locking pin for use with central locking systems Installation: Rack to clip on, cylinder to slide onto rack Material: zinc, die-cast nickel-plated 234.65.600 black 234.65.300 Order Information: Only use cylinder cores with restricted rotation and direction right-locking together with pin-tumbler cylinder removable cores. Locking sleeve, for push-button cylinder Ø9 Ø13.7 Central locking rotary lock 10 Accommodates the locking pin Mounts in drilled hole Material: brass nickel-plated 234.59.994 Packing: 10 or 100 pcs. Order Information: Only use cylinder cores with restricted rotation and direction right-locking together with pin-tumbler cylinder removable cores. 18 30 For cylinder cores that are inserted from the front on site Closure direction: 180 With lifting pin Mounts in the front panel Open 6 20 Ø6 25 43.5 34 SYMO 3000 Central locking rotary cylinder 3 22 Ø18 With mounting plate on one side Material: zinc, die-cast Travel mm 12 nickel-plated 234.98.650 17 nickel-plated 234.98.660 Locked Arresting pin Central locking bar Mount central locking rotary cylinder on the right-hand side. Central locking rotary lock Bar guide 34 Flat head screws pages 302 304 Ø6 18 30 43.5 3 22 Ø18 With mounting plate on two sides Material: zinc, die-cast Travel mm 12 nickel-plated 234.98.600 black 234.98.300 17 nickel-plated 234.98.610 Packing: 1 or 20 pcs. 508

SYMO 3000 Central locking cylinder with bar 40 7 22 Ø18 For cylinder cores that are inserted from the front on site Closure direction: 180 Bar length: 600 mm Travel: 8 mm Screw-mounted 600 16 3 2.5 Material: Cylinder: zinc, die-cast; Bar: aluminum nickel-plated 237.48.600 black 237.48.300 Open SYMO 3000 Central locking rotary cylinder Locked Arresting pin Bar guide Bar guide for central locking cylinder 38 Screw-mounted #6 20 1.5 4.5 20 Material: Cylinder: zinc, die-cast; Bar: aluminum 237.23.006 Arresting pin Central locking bar 509 Ø7 16 19 3 15 6 19 3 26 38 Ø6 Material: zinc, die-cast 6.5 237.22.120 9.0 237.22.086 13.0 237.22.100 (includes 1 M4 grub screw, with SW2 hexagon socket - pre-mounted) Material: aluminum Length bright 600 237.10.002 800 237.10.004 1,000 237.10.006 1,500 237.10.009 Flat head screws pages 302 304

PLW SYMO 3000 Plate-cylinder removable core With folding key 15.5 Ø12.5 21.7 1.5 For all locks and rotary handles within the SYMO 3000 system Left and right locking direction With 6 plate levers 3,000 different key changes are possible With different key changes, sorted Each package contains 50 different key changes out of specified range. Suitable master key (MK): HS 3 ( 210.11.003) Key changes Cat. No Key changes Cat. No SH 0601-0650 210.41.751 SH 1101-1150 210.41.761 SH 0651-0700 210.41.752 SH 1151-1200 210.41.762 SH 0701-0750 210.41.753 SH 1201-1250 210.41.763 SH 0751-0800 210.41.754 SH 1251-1300 210.41.764 SH 0801-0850 210.41.755 SH 1301-1350 210.41.765 SH 0851-0900 210.41.756 SH 1351-1400 210.41.766 SH 0901-0950 210.41.757 SH 1401-1450 210.41.767 SH 0951-1000 210.41.758 SH 1451-1500 210.41.768 SH 1001-1050 210.41.759 SH 1501-1550 210.41.769 SH 1051-1100 210.41.760 SH 1551-1600 210.41.770 Packing: 50 pcs. (includes 2 folding keys) Order Information Each package contains 50 cylinder cores out of the specified range of key changes, 1 pc. of each key change. Key changes Cat. No SH 1601-1650 210.41.771 SH 1651-1700 210.41.772 SH 1701-1750 210.41.773 SH 1751-1800 210.41.774 SH 1801-1850 210.41.775 SH 1851-1900 210.41.776 SH 1901-1950 210.41.777 SH 1951-2000 210.41.778 SH 2001-2050 210.41.779 SH 2051-2100 210.41.780 Key changes Cat. No SH 2101-2150 210.41.781 SH 2151-2200 210.41.782 SH 2201-2250 210.41.783 SH 2251-2300 210.41.784 SH 2301-2350 210.41.785 SH 2351-2400 210.41.786 SH 2401-2450 210.41.787 SH 2451-2500 210.41.788 SH 2501-2550 210.41.789 SH 2551-2600 210.41.790 Keyed alike Suitable master key (MK): HS 1 ( 210.11.001) Key change SH 0001 210.46.601 Plate-cylinder removable core, without key Keys for plate-cylinder removable core 15.5 Ø12.5 21.7 1.5 For all locks and rotary handles within the SYMO 3000 system Left and right locking direction With 6 plate levers 3,000 different key changes are possible Material: Housing: zinc, die-cast; Plate levers: brass Key change nickel-plated SH 0001-0200 210.41.601 SH 0001-0600 210.41.602 SH 0001-2600 210.41.603 Order Information Please specify the required key change and quantity (per key change) nickel-plated 210.11.058 folding key nickel-plated with black cap 210.11.060 Packing: 2 pcs. on key ring Order Information Please specify the required key change and quantity (per key change) 510

SYMO 3000 Master key for plate-cylinder removable core, PLW SYMO 3000 Version Key change nickel-plated HS 1 SH 0001-0200 210.11.001 HS 2 SH 0001-0600 210.11.002 HS 3 SH 0001-2600 210.11.003 Key blank Removal key nickel-plated 210.11.090 Packing: 200 pcs. For duplicate keys or additional keys Not suitable for removal keys or master keys nickel-plated 210.11.080 Packing: 200 pcs. Key cap Material: plastic (soft) grey 210.90.504 brown 210.90.102 black 210.90.308 Packing: 10 pc. Pin-tumbler cylinder removable core, STW SYMO 3000 15.5 Ø12.5 25 5 For all locks and rotary handles within the SYMO 3000 system Left and right locking direction With 6 pairs of pins 20,000 different key changes are possible Material: zinc, die-cast nickel-plated 210.45.600 (includes 1 key) Replacement and additional key new silver 210.45.000 (includes 1 key) Order Information Key changes 0001-1,000 are available Please specify the required key changes 511 Order Information Key changes 0001-1,000 are available Please specify the required key changes Number series for keyed-alike changes, e.g. 0001-0200 Removal key For removing the pin-tumbler cylinder removable core of the types STW SYMO 3000 and MK system Standard. new silver 210.45.090

SYMO 3000 Locking System New Item SYMO 3000 Plate-Cylinder Removable Core 15.5 21.7 For all lock bodies within the SYMO 3000 system Locking direction: left and right Locking system: with 6 plate levers Key changes: 3000 different key changes are possible Ø12.5 1.5 Supplied accessories: 2 keys With different key changes Master key not possible Material: Housing: zinc die-cast Lever plate: brass nickel-plated 210.40.600 Packing: 20 pcs. Keyed alike Suitable master key (MK): HS 1 ( 210.11.001) see next page Key change SH 1 210.40.601 SH 2 210.40.602 SH 3 210.40.603 SH 4 210.40.604 SH 5 210.40.605 SH 6 210.40.606 SH 7 210.40.607 SH 8 210.40.608 SH 9 210.40.609 SH 10 210.40.610 Packing: 20 pcs. STW SYMO 3000 Pin-Tumbler Cylinder Removable Core For all lock bodies within the SYMO 3000 system Locking direction: left and right Locking system: with 6 pairs of pins Key changes: 20,000 different key changes are possible Supplied accessories: 1 key With different key changes Master keying and General Master key systems available upon request. Please include a key plan. Plan on 8-10 weeks to produce. Material: Housing: zinc die-cast nickel-plated 210.45.600 Keyed alike Key change 001 A 210.45.601 002 A 210.45.602 003 A 210.45.603 004 A 210.45.604 005 A 210.45.605 511 A

Cylinder Module System Small diameter, low profile High quality/long life Master keyed Numbered on lock face and keys Meets or exceeds ANSI/BIFMA requirements Complete Keying Versatility Furniture can be keyed easily to your customers requirements at any time. Key numbers can be readily changed by your customer in the field. Ease of Finishing Furniture may be finished without lock plug installed, eliminating the need for masking. Simplified Inventory Management One stock of lock cores fulfills all locking requirements. The Cylinder Module System from Häfele is the most versatile locking system for your home or office furniture needs. It is based on separate lock modules that allow you to create many combinations of locking systems. Separate lock bodies and lock cores are installed with a snap, and can only be removed with removal key. Any lock core fits into Any lock body 512

Lock Cores Cylinder Module System Separates the lock core from cylinder housing, any combination of locking systems can be obtained Manufacturer can install fully functional locking systems Simplifies the planning of locking systems, changes can be made without difficulty 15.8 Lock cores can be replaced with the aid of the removal key 16 3 Snap-In Lock Core, Suitable For Any Cylinder Body 5 plate levers = 500 possible key changes Keyed different Material: zinc die-cast, unfinished; Plate levers: brass; Keys: brass, nickel-plated Lock face: nickel polished nickel matt brass polished bronzed epoxy brass antique black epoxy 210.04.606 210.04.710 210.04.803 210.04.106 210.14.102 210.04.302 Packing: 50 pcs. Keyed alike Lock face: nickel polished nickel matt brass polished bronzed epoxy brass antique black epoxy Keying # s Cat No. 100 TA 210.04.615 210.04.720 210.04.812 210.04.115 210.14.111 210.04.311 101 TA 210.04.624 210.04.721 210.04.821 210.04.124 210.14.120 210.04.0 102 TA 210.04.633 210.04.722 210.04.830 210.04.133 210.14.139 210.04.339 103 TA 210.04.642 210.04.723 210.04.849 210.04.142 210.14.148 210.04.348 104 TA 210.04.651 210.04.724 210.04.858 210.04.151 210.14.157 210.04.357 105 TA 210.04.660 210.04.725 210.04.867 210.04.160 210.14.166 210.04.366 106 TA 210.04.679 210.04.726 210.04.876 210.04.179 210.14.175 210.04.375 107 TA 210.04.688 210.04.727 210.04.885 210.04.188 210.14.184 210.04.384 108 TA 210.04.697 210.04.728 210.04.894 210.04.197 210.14.193 210.04.393 109 TA 210.04.704 210.04.729 210.04.901 210.04.204 210.14.200 210.04.400 Packing 10 pcs. (includes 2 keys) Insert, Insert, push push until they until snapthey snap together togehter Cylinder Rosette For any Cylinder Body Note: Requires 19 mm diameter hole for installation with lock cylinders. 17.4 Removal Key To remove lock cores Material: brass 210.02.004 513 Protective cap Keeps interior of cylinder housing free of paint and dirt after lock is installed. Material: PVC Packing: 100 pcs. 24 7.6 Material: brass nickel polished 210.04.062 nickel matt 210.04.070 brass polished 210.04.054 bronzed 210.04.017 brass antique 210.04.053 black 210.04.035 210.02.095 2 Master key, fits all TA lock cores (see table above) Material: brass The cylinder housings and lock cores are marked (see diagram, below). A series of furniture doors can all be locked with the same direction of turn, if the markings are positioned identically. Square spindle Marking 210.02.059 Key blanks Can be cut to replace broken or lost keys Material: brass 210.02.005

Deadbolt Locks Cylinder Module System 9 Deadbolt Lock Throw: 9 mm (3/8") 16 20.5 20.5 22.5 45 Pan Head #8 Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bolt: steel, nickel-plated left/right 2.12.302 drawer 2.12.311 2.5 7.5 18 Deadbolt Lock Throw: 13 mm (1/2") 36 13 19 22.5 2.5 3 ø16.5 ø16.5 8 18 Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bolt: steel, nickel-plated left/right 2.18.304 drawer 2.18.313 Rotate cylinder core 180º to install 45 Deadbolt Lock Offset Bolt, for face-frame cabinets Throw: 13 mm (1/2") 61 48 13 19.5 45.5 16.5 A 1/2" Throw 2" Lock shown in locked position Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bolt: steel, nickel-plated A left/right 15 mm 2.18.348 drawer 15 mm 2.18.358 left/right 22 mm 2.18.350 drawer 22 mm 2.18.360 Rotate cylinder core 180º to install See page 513 for snap-in lock cores Insert, push until they snap together See page 527 for drill bit Pan head screws pages 304 305 Offset cam eliminates need for strike plates on face frame application where door or drawer overlays face frame. Cylinder Rosette For any Cylinder Body Note: Requires 19 mm diameter hole for installation with lock cylinders. 24 7.6 Material: brass nickel polished 210.04.062 nickel matt 210.04.070 brass polished 210.04.054 bronzed 210.04.017 brass antique 210.04.053 black 210.04.035 17.4 2 514

Deadbolt Locks Cylinder Locking System A B Deadbolt Lock - double doors with straight bolts Throw: 13 mm (1/2") 13 (1/2") 5 (3/16") Upper left hand Upper right hand 36 (1 7/16") B Lower left hand A Lower right hand ø16.5 Locks both doors without the need of lock strips or a spring catch. 36 (1 7/16") 46 (1 13/16") 4 (3/16") Material: Lock case: nylon, black Cylinder housing: zinc die-cast Mounting Type lower right hand or upper left hand A 2.35.301 lower left hand or upper right hand B 2.35.300 Deadbolt Lock - double doors with offset bolt for overlay doors Throw: 13 mm (1/2") 17 (11 /16") 13 (1/2") 52 (2 1/16") ø16.5 Material: Lock case: nylon, black Cylinder housing: zinc die-cast Mounting Type lower right hand or upper left hand A 2.35.303 lower left hand or upper right hand B 2.35.302 46 (1 13/16") 36 (1 7/16") 4 (3/16") Groove or strike plate 239.61.319 1" See page 513 for snap-in lock cores. (must be ordered separately) 515 Use strike plate 239.61.350 Insert, push until they snap together 1" See page 529 for angle strike & strike plate

Cylinder Module System Locks Cam Locks Horizontal drawer lock with 90º rotation is ideal for 4-sided box construction with drawer front attached. Can be mounted at the top of the drawer front and the 90º throw allows it to fit in a space as small as 7/8"(the 180º rotation will not work because cam will rotate down and hit the drawer box). Cam Lock Body With straight, extended lever. Rotation: 180º. 15.5 16.5 2.3 7 Material: Cylinder housing: zinc die-cast, unfinished Lever: steel, nickel-plated Packing horizontal installation drawer 235.08.303 10 pcs. vertical installation door 235.08.358 10 pcs. Packing: 100 pcs. 18 Cam Lock Body With outward-cranked lever. 42 15 2.3 21.5 16.5 12 18 Material: Cylinder housing: zinc die-cast, unfinished Lever: steel, nickel-plated horizontal installation drawer, 180º 235.08.009 horizontal installation drawer, 90º 235.08.018 vertical installation door, 180º 235.08.054 Cam Lock Body With inward-cranked lever. Rotation: 180º. Cam Lock Body With outward-cranked, hooked lever. Rotation: 180º. 42 15 42 15 2.3 2.5 21.5 16.5 18 2.3 10 18 16.5 18 16.5 Material: Cylinder housing: zinc die-cast, unfinished Lever: steel, nickel-plated horizontal installation drawer 235.08.107 vertical installation door 235.08.152 Material: Cylinder housing: zinc die-cast, unfinished Lever: steel, nickel-plated horizontal installation drawer 235.08.205 vertical installation door 235.08.250 Universal Cam Lock Body 42 Adjustable from 7 /8" (22 mm) 1 3 /8" (35 mm) by turning the mounting flange. Barrel conveniently marked with lines to facilitate setting depth. Rotation - 90º. Can be oriented in any of the 3 positions above. 12 12 15 See page 513 for snap-in lock cores. (must be ordered separately) Insert, push until they snap together Cam lock spacer Used to space locks in 16 mm ( 5 /8") material. Used with cam locks 235.08.series and front mount central lock 234.85.001 only. 5 mm 16.5 Material: nylon black 210.02.080 44 mm 38 19 mm 38 48 Material: zinc unfinished, steel, nickel-plated 235.09.000 (includes 2 different cams) See page 530 for cylinder rosettes. 516

Glass Door Locks Cylinder Module System Small high quality appearance Fully cushioned to avoid glass damage Neoprene gasket on front surface Plastic washer on back surface Unique retainer nut allows secure tightening by hand Two piece design for quick mounting user does not need to assemble cam Finish cap provides improved appearance and eliminates glare of nickel-plated cams (1 1/4") 23 (15/16") Glass Door Lock - Horizontal Installation For glass thickness up to 3/8" thick Cam rotation: 90º Material: Outer body: nylon, black Face plate: brass-plated Finish cap: plastic, black Lever: steel, nickel-plated nickel matt 233.17.630 nickel polished 233.17.730 brass polished 233.17.830 5 (3/16") Finish cap is attached to give finished appearance 7 (5/16") Cam in locked position 22 (7/8") Cam in unlocked position 42 (1 11/16") 31 (1 1/4") Cylinder body rotates through hole in glassno need to remove cam. 22 (7/8") Nut washer is hand tightened to fasten cylinder body to glass 7/8" diameter hole, centred 7/8" from edge. Bore glass before glass is tempered. 517 31 (1 1/4") Cylinder body rotates through hole in glass - no need to remove cam. 42 (1 11/16") 7/8" diameter hole, centred 7/8" from edge. Bore glass before glass is tempered. 22 (7/8") Finish cap is attached to give finished appearance. 22 (7/8") Nut washer is hand tightened to fasten cylinder body to glass. Cam in unlocked position Cam in locked position Glass Door Lock - Vertical Installation For glass thickness up to 3/8" thick Cam rotation: 90º Material: Outer body: nylon, black Face plate: brass-plated Finish cap: plastic, black Lever: steel, nickel-plated nickel matt 233.17.600 nickel polished 233.17.700 brass polished 233.17.800 See page 513 for snap-in lock cores (must be ordered separately) Insert, push until they snap together See page 529 for angle strikes

Glass Door Locks Cylinder Module System Non-bore glass door locks Small high quality appearance Integrated knob to open door Fully cushioned to avoid glass damage Neoprene gasket on front surface Plastic tightening screw on back surface 31 (1 1/4") 42 (1 11/16") Lock slips onto edge of glass door at any locationno boring required 13 (1/2") Cam in locked position 29 (1 1/8") 10 (3/8") Ø22 (7/8") 8 (5/16") Set screw tightens lock to glass using a flat-bladed screwdriver Glass Door Lock - Vertical Installation For glass doors up to 5/16" thick. Material: Outer body: nylon, black Face plate and cylinder: brass-plated Lever: steel, nickel-plated nickel matt 233.18.630 nickel polished 233.18.730 brass polished 233.18.830 Lock slips onto edge of glass door at any location-no boring required. Glass Door Lock - Horizontal Installation For glass doors up to 5/16" thick. Material: Outer body: nylon, black Face plate and cylinder: brass-plated Lever: steel, nickel-plated nickel matt 233.18.600 nickel polished 233.18.700 brass polished 233.18.800 Fixed tab 13 (1/2") 11 (7/16") 31 (1 1/4") Cam in locked position 42 (1 11/16") 13 (1/2") Fixed tab provides stop for opposing door. Lock slips onto edge of glass door at any locationno boring required. See page 513 for snap-in lock cores (must be ordered separately) Insert, push Insert, push until they snap until they togehter snap together Glass Door Lock - Double Door For glass doors up to 5/16" thick. Material: Outer body: nylon, black Face plate and cylinder: brass-plated Lever: steel, nickel-plated nickel matt 233.18.660 nickel polished 233.18.760 brass polished 233.18.860 See page 529 for angle strikes 518

Special Deadbolt Locks Cylinder Module System The most economical arrangement for locking two drawers simultaneously. Only a single hole needs to be drilled in the desk or cabinet side panel and the lock is then installed vertically. A drawer wedge is then screwed to each drawer side panel. Once the cylinder core has been installed, the lock is ready for use. application Central Locking System - 2 drawer, for two drawers with lockbar Throw: 13 mm (1/2") 17.5 13 19 Q Drawer Wedge 117 ø16.5 Drawer Side Panel Drawer Front Cabinet/desk side panel Wardrobe/Overhead Storage Lock Throw: 13 mm (1/2") 45 18 Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bars: steel, nickel-plated 234.92.300 Accessory Q, see page 528 Material: Lock case: nylon, black Cylinder housing: zinc die-cast, unfinished Bars: steel, black powder-coated Bar retainers: nylon, black horizontal installation 223.63.300 vertical installation 223.63.355 Packing: 1 set: (1-lock body, 2-bars, 1220 mm (48") each, 6-bar retainers) Suitable strike plates, see page 529 Push-button Lock Compatible with all cores Small 3/4" diameter for improved appearance Throw: 8 mm (5/16") 519 16.5 7 2.5 mm 19 mm 23 48 8 Material: Lock case: nylon Cylinder housing: zinc die-cast See page 513 for snap-in lock cores & protective cap Insert, push Insert, until push they snap togehter until they snap together 234.65.000 See page 530 for cylinder rosettes

Cam Lock Hasp Durable construction secures doors, drawers, or lockers when used with a padlock Attractive plated finish Includes straight cam 24 mm (15/16 ) long Maximum material thickness: 28 mm (1 1/8 ) Screw-mounted Cam Lock Hasp, for wood doors, drawers, or lockers Material: zinc die-cast, plated Accessories: steel Finish/ Item No. polished chrome 235.17.200 black 235.17.300 matt nickel 235.17.600 *Packing: 150 pcs. (includes hex nut, rosette, 24 mm straight cam, attaching nut and attaching screw) 19 mm (3/4 ) 24 mm (15/16 ) #6 Offset Cams, order separately (replace straight cams) ; Finish: yellow chromate Offset Item No. 3 mm (1/8 ) 219.13.910 6 mm (1/4 ) 219.13.930 9 mm (3/8 ) 219.13.950 *Packing: 20 pcs. 33 mm (1 5/16 ) 25 mm (1 ) Ø10 mm (3/8 ) 25 mm (1 ) 19.5 8 mm (5/16 ) Requires 19.5 mm (3/4 ) diameter hole *Minimum order quantity is 1 piece. 519A

Central Locking Single Pedestal Front Mount Cylinder Module System Permits locking from the front either in a fixed position in a lock strip or in a drawer front, in which case it travels with the drawer. Can be installed on the left or right side of the cabinet as preferred. Typical Applications Locks L Side Panel 4 40.5 AA A 17.5 16.5 Lock Strip 1" min. Desk with Lock Mounted in Fixed Rail (1" min.) Lock J Q Drawer Wedge Modular Pedestal with Lock Mounted in Drawer Front Drilling & routing diagram A Lock body with lifting pin, 180º rotation; 12 mm lift 16.5 42 12 40.5 ø6.4 35 2 18 Material: zinc die-cast unfinished 234.85.001 AA Lockbar clip To fit lock body A mounts at any location along lockbar L see combination tool on page 527 See page 513 for snap-in lock cores and protective cap (must be ordered separately) Insert, push until they snap together Insert, push until they snap togehter 1.2 7 15 9.5 28.5 See page 529 for locking accessories zinc-plated 234.87.998 Packing: 500 pcs. For Accessories: L Lockbar J Locking Pins Q Drawer Wedges K Bar Retaining Brackets Miscellaneous Strikes, see page 529 520

Central Locking Single Pedestal Side Mount Cylinder Module System An economical arrangement which allows installation of the lock body in the side panel at any position. Can be installed on the left or right side of cabinet as preferred. Typical Applications 25 L Side Panel 4 Locks BB 17.5 B 16.5 Desk with Lock Mounted in Kneespace Panel Drawer Front Lock Q Drawer Wedge Drilling & routing diagram J Mobile Pedestal with Lock Mounted in Side Panel B Side Mount Lock Body with locking lug 180º rotation, 12 mm lift 42 3.8 12 Material: zinc die-cast unfinished 234.86.017 16.5 8 18 BB Lockbar clip 2 To fit lockbar clip to lockbar L see combination tool, see page 353 1.2 521 17 51.5 See page 530 for cylinder rosettes 21 4 8.7 17 zinc die-cast 234.86.900 See page 513 for snap-in lock cores and protective cap Insert, push until they snap togehter Insert, push until they snap together For Accessories: L Lockbar J Locking Pins Q Drawer Wedges K Bar Retaining Brackets Miscellaneous Strikes, see page 529

Central Locking Rail Mount Lock Cylinder Module System Häfele provides a complete system for central locking of desks and credenzas, with one lock mounted in a minimum 25 mm front exposed rail. Desk Credenza With Double Doors F Actuator N Shaft Clip C D or E Cylinder Body F Actuator C Central Locking System Body - Centre Drawer Application With centre drawer bolt, accommodates flexible shaft M or MM Material: Lock case: nylon Cylinder housing: zinc die-cast black/unfinished 237.46.054 L Lockbar M or MM Flexible Shaft 22 17.5 44 12.5 J J Additional locking pins are required. Adjustable Drawer Locking Pin 7.5 D Central Locking System Body - without Centre Drawer Accommodates flexible shaft M or MM Material: Lock case: nylon Cylinder housing: zinc die-cast black/unfinished 237.46.003 E Central Locking System Body - Double Door Application With centre bolt to lock 2 doors Accommodates flexible shaft M or MM Material: Lock case: nylon Cylinder housing: zinc die-cast black/unfinished 237.46.053 5 10.5 18 23 38 16.5 90.6 45 4.5 30 F Lockbar Actuator Transmits horizontal rotation of flexible shaft M or MM to vertical movement of lockbar L. Spindle guide: plastic galvanized/black 234.87.023 Note: An additional locking pin J is required to transfer movement - see drawing above. 30 43 ø12.5 See page 529 for locking accessories 8 14 See page 513 for snap-in lock cores Insert, push until they snap together Insert, push until they snap togehter For Accessories: L Lockbar J Locking Pins Q Drawer Wedges K Bar Retaining Brackets Miscellaneous Strikes, see page 529 522

Central Locking Anti-Tip System Cylinder Module System Meets or exceeds ANSI/BIFMA requirements Only one drawer can be opened at a time For up to 4 drawers maximum When any drawer is pulled open, the wedges on that drawer move the lockbar into a locked position, preventing any further drawers from being opened 523 A B A B Marking Step 1 B B A A Installation of wedges A and B, must be installed as shown in drawing at left When wedges are installed in the proper positions as shown, only one drawer will ever be open at any one time, even if two drawers are pulled at exactly the same time! Installation of arresting pins Stop bracket Step 2

Central Locking Lateral File Anti-Tip System Cylinder Module System Häfele provides a complete system for central locking of desks and credenzas, with one lock mounted in a minimum 25 mm front exposed rail. N Shaft Clip D Cylinder Body G Lateral File Actuator M or MM Flexible Shaft Lateral File Application K Bar Retaining Bracket J Additional Locking Pin L Lockbar Pan Head #8 HA-HB Anti-tip Wedges 22 4.5 17.5 44 ø16.5 30 17 16.5 D Central Locking System Body Accommodates flexible shaft M or MM Material: Lock case: nylon Cylinder housing: zinc die-cast black/unfinished 237.46.003 G Actuator Transmits movement of flexible shaft M or MM to vertical movement of lockbar L. A B See page 513 for snap-in lock cores and protective cap (must be ordered separately) Insert, push until they snap together Insert, push until they snap togehter 70 15 21 42 Pan head screws pages 304 305 67 9.5 19 64 11 108 14.5 See page 530 for cylinder rosettes Note: an additional locking pin J is required to transfer movement - see drawing above. ; Mechanism: plastic zinc-plated/unfinished 237.44.023 HA-HB Anti-tip Wedges Prevents more than one drawer from being opened at a time, keeping the cabinet from tipping forward. Meets or exceeds BIFMA specifications. Material: nylon black Wedge A 237.44.372 Wedge B 237.44.363 For Accessories: L Lockbar J Locking Pins Q Drawer Wedges K Bar Retaining Brackets Miscellaneous Strikes, see page 529 524

Anti-Tip Interlock System No Lock Actuator 61 J Locking Pins 61 8 Snapper Actuator Used for applications calling for an anti-tip system that does not require a lock Does not require the use of D or E or M flexible shaft Secure against jarring out of place during shipping For added assurance, use wedge lock listed below Wedges zinc-plated 237.44.113 Packing: 100 pcs. Pan Head #8 L Lockbar 30 45 11 Wedge Lock Use only with anti-tip system above, without lock Prevents jamming due to lockbar bounce caused during shipping The wedge lock is marked remove after shipping and usually drops off when the drawers are opened the first time Material: plastic red 237.44.990 525 For Accessories: L Lockbar J Locking Pins Q Drawer Wedges K Bar Retaining Brackets Miscellaneous Strikes, see page 529 Pan head screws pages 304 305

Anti-Tip Interlock System Meets or exceeds ANSI/BFIMA requirements Only one drawer can be opened at a time Anti-tip Snapper Mounts to side of cabinet 1 required for 2 drawers Pan Head #8 6 1/16" 152 1 1/4" 2 1/2" 64 1 1/4" 1 5/8" 41 Material: zinc, die-cast unfinished/black 237.43.310 Packing: 100 pcs. Drawer Clip Mounts to side of drawers 2 required per snapper (shown above) Pan Head #8 1 1/4" 1 3/4" 46 Material: plastic black 237.43.0 Packing: 20 pcs. Linkage Arm 2 pcs. required for 4 drawers 1 1/4" 1 3/4" 46 21 (7/8") 19 (3/4) Material: plastic black 237.43.330 Packing: 100 pcs. 48 (1 7/8") Snapper X = Distance between snappers Lockbar with 2 arresting pins installed Linkage arms Drawer Clips 18 (11/16") 18 (11/16") 44 (1 3/4") Distance between pins on lockbar = X - 1" Components required for 2 drawer applications: 1 anti-tip snapper 2 drawer clips 1 3/16" 30 1 3/16" 30 1/8" 3 1/8" 3 Pan head screws pages 304 305 1 3/8" 35 1 3/8" 35 2 7/8" 73 Components required for 4 drawer applications: 2 anti-tip snappers 4 drawer clips 2 linkage arms Lockbar and 2 arresting pins - see accessories on page 527 2 7/8" 73 7 5/8" 194 Minimum distance between drawer slides Recommended position: 1. Left-hand side of case 2. 3" 5" from front of case For 3 drawer applications simply lock one of the arms on anti-tip snapper to cabinet side panel using a screw through hole in arm. Width required between case and drawer side must = 1/2" 526

Cylinder Module System Accessories L Lockbar, for use with any central locking assembly from the cylinder module system. Lockbar groove is 11/16 wide x 5/ deep. 3.5 (1/8 ) 16.5 (11/16 ) Length zinc-plated 457 mm (18") 234.87.818 609 mm (24") 234.87.827 915 mm (36") 234.87.836 1220 mm (48") 234.87.845 J Arresting pins Hexagonal section, for installation in lockbar combination tool, at any desired position. L, using Length ø7 Material: Pin: steel Wing screw and lock washer: steel Length nickel-plated/black Packing 9.5 mm (3/8 ) 237.22.714 100 pcs. 13 mm (1/2 ) 237.22.723 100 pcs. 16 mm (5/8 ) 237.22.7 100 pcs. 19 mm (3/4 ) 237.22.741 500 pcs. 22 mm (7/8 ) 237.22.750 100 pcs. 25 mm (1 ) 237.22.769 100 pcs. mm (1 1/4 ) 237.22.778 100 pcs. 38 mm (1 1/2 ) 237.22.787 100 pcs. 51 mm (2 ) 237.22.796 100 pcs. K Bar Retaining Bracket, with guide lug Pan Head #6 66 (2 5/8 ) 55 11 (7/16 ) 1 zinc-plated 234.87.989 Packing: 100 pcs. 1.5 527 16.5 Combination Tool To install arresting pins J in lockbar L. In addition to the hexagon head, the tool incorporates a notched sleeve which engages the square lug in the cylinder housing, enabling any lock in the module system to be operated before the cylinder core is installed. Material: hardened steel, nickel-plated Handle: plastic, clear/red 006.36.653 Special-purpose drill bit - Ø 16.5 mm Suitable for any cylinder housing in the system. Can also be used in clockwise multi-spindle drilling machines with 10 mm chuck. Material: Shank: steel Bit: carbide-tipped 001.24.194 Pan head screws pages 304 305

Cylinder Module System Accessories Flexible Shaft fits central locking system locks C, D and E to order, see specifications at right 35 mm (min.) 100 mm (max.) To order flexible shaft: 1. Specify lock body model:, or C D E 2. Dimension L, inside cabinet width L Dim A - Specify position of inner square (if not centred) L Specify length L required = internal cabinet width A zinc-plated 237.44.10X MM Adjustable Shaft Kit Can be used to fabricate any size shaft from 24 to 44 by simply cutting the square shaft to the desired length. Incudes: 2 - extended shaft clips 2 - square shafts - 12 ea 1 - flexible shaft - 20 ea. 2 - shaft connectors 1 - hex key for installation 12" 20" Shaft Connector (2) Flexible Shaft 12" Square Shafting (2) Extended Shaft Clip (2), zinc-plated, plastic Cat.No. black 237.60.010 N Shaft Clip Fits flexible shaft M Q Drawer Locking Wedge above, holds shaft to cabinet. Pan head screws pages 304 305 X 20 31 10 12.5 5.2 12 15 2 Material: plastic natural 237.44.014 Packing: 100 pcs. Material: plastic black 234.91.090 Packing: 100 pcs. Pan Head #8 Pan Head #8 528

Accessories Cylinder Module System Strike Plate, screw-mounted, belt loop type 4.2 Pan Head #8 black 239.61.337 6 6 Strike Plate, screw-mounted 11.5 22 4.2 6 12.5 10 black 239.61.8 Strike plate, for behind door 5.5 11 22 4.2 4.2 dia. hole thru (2 places) 22 11.40 8 1.4 black 239.61.350 Angle Strike 90º angle, screw-mounted 19 11.5 22 4.2 8 black 239.61.319 Strike Plate, for lever lock cylinders Strike Plate, with offset slot, for hook lever lock cylinder 529 26 49 19 49 11 11 1.5 1.5 black 239.08.705 black 239.08.723 Pan head screws pages 304 305

Cam Locks FH Series Cam Locks, for vertical door mounting 5 plate levers = 200 key changes 15 42 Keyed different Material: Mounting plate: zinc die-cast Lever: steel, zinc-plated Cylinder: zinc die-cast #8 matt nickel-plated 2 2 30 18 2 22.5 90º [235.04.609] 90º [235.04.654] Keyed alike: Key Change FH 1 matt nickel-plated Ø 18 90º [235.04.814] 90º [235.04.912] (includes 2 keys) Cylinder Rosettes, ordered separately Ø 24 Ø 19 1.5 Material: brass matt nickel-plated 219.19.676 Packing: 100 pcs. Key blanks, for FH series nickel-plated 209.99.008 Flat head screws pages 302 304 530

Deadbolt Locks FH Series Deadbolt Lock, with ø 18 mm cylinder. For left hand use. 5 plate levers = 200 key changes. Backset = 26 mm Closure travel: 180 Closure travel unlocked locked 40 15.5 40 26 20 8.5 Material: zinc die-cast Keyed different Keyed alike - FH1 matt nickel-plated [2.04.613] [2.04.668] chrome-plated [2.04.211] [2.04.266] (includes 2 keys) 8 22 2.5 4 #6 Ø 18 Deadbolt Lock, with ø 18 mm cylinder. For right hand use. 5 plate levers = 200 key changes. Backset = 26 mm Closure travel: 180 20 8.5 26 15.5 4 2.5 40 Ø 18 40 8 22 Closure travel unlocked locked #6 Material: zinc die-cast Keyed different Keyed alike - FH1 matt nickel-plated [2.04.604] [2.04.659] chrome-plated [2.04.202] [2.04.257] (includes 2 keys) Deadbolt Lock, with ø 18 mm cylinder. For drawer use. 5 plate levers = 200 key changes. Backset = 26 mm Closure travel: 180 20 8.5 Spacer Plate, install between lock and door to prevent the cylinder from projecting excessively through the door. Material: plastic 531 #6 40 40 2.5 26 15.5 light grey 2.03.992 Ø 18 2.5 40 4 2.5 22 Closure travel unlocked locked Material: zinc die-cast Cylinder Rosettes, ordered separately. Material: brass Ø 24 Ø 19 1.5 Key blanks, for FH series Keyed different Keyed alike - FH1 matt nickel-plated [2.04.622] [2.04.677] chrome-plated [2.04.220] [2.04.275] (includes 2 keys) polished brass [219.19.871] nickel-plated 209.99.008 chrome-plated 219.19.276 Raised flat head screws pages 309 310

Deadbolt Locks FH Series #6 16 20 9 Dimension a 20 4.5 3 Ø 18 40 5.5 22 MINI-LOCK 40, inlaid locks with cylinder 5 plate levers = 200 key changes Backset = 20 mm Closure travel: 180 Keyed different Material: Case: zinc die-cast and steel Backplate: matt Cylinder: zinc-alloy, matt nickel-plated left 230.12.704 right 230.12.606 drawer 230.12.704 (includes 2 keys) Keyed alike: Key Change FH 1 left 230.12.713 right 230.12.615 drawer 230.12.811 (includes 2 keys) RONDELL, inlaid flap locks with cylinder With key trap (key removable only when locked) 5 plate levers = 200 key changes. Closure travel: 90.35 #6 2.5 17.5 2.5 3.5 23 Ø19 Keyed different Material: zinc die-cast matt nickel-plated 219.27.051 Keyed alike: Key change FH1 matt nickel-plated 219.27.006 (includes 2 keys) Advantages of RONDELL locks: The inside of the drop-leaf or door remains completely flat. With the flap open, the lock and catch lie within the panel, with no projecting parts. The key trap presents an additional advantage. Since the key can only be withdrawn when the flap is locked shut Flap hinge it cannot fall out when the flap is lowered. Flap open Angled strike Flap closed Flat head screws pages 302 304 Cylinder Rosettes, ordered separately Ø 24 Material: brass Install between the lock and inside of the door to prevent the lock from projecting excessively from the door. For 219.27. series Material: plastic light grey 230.07.990 Packing: 100 pcs. Ø19 1.5 Cat No. matt nickel-plated 219.19.676 Packing: 100 pcs. 40 2.5 For 230.12. series nickel-plated 230.13.998 5

Tambour and Sliding Door Locks FH Series 2.5 22 28 13 7.5 75 Ø7 12.5 #6 14 Lock Case for Tambour Door Material: Face plate: brass-plated Body: steel left 230.37.256 right drawer* 230.37.301 1.5 17 13 27 ø18 75 21 22 13 17.5 * The backset dimension is reduced by 3 mm on the drawer version. 9 Cylinder For Tambour Door Lock Case 5 plate levers = 200 key changes Backset = 22 mm Closure travel: 180 0 Keyed different Material: zinc die-cast, matt nickel-plated 230.22.602 Keyed alike: Key change FH1 230.22.611 (includes 2 keys) Tambour Door Rim Lock, with cylinder 5 plate levers = 200 key changes. Backset = 26 mm Tambour door locks 533 7.5 13.5 26 15.5 4 60 22 2.5 Lightweight sliding doors Ø18 40 15 8 2 40 22.5 40 2 #5 #6 2.5 Cylinder Rosettes, ordered separately Material: Case: zinc die-cast, matt nickel-plated Strike plate: steel, zinc-plated Cylinder: zinc die cast, matt nickel-plated Keyed different 2.07.605 Keyed alike: Key change FH1 2.07.614 (includes 2 keys and 1 strike plate) Spacer Plate Install between lock and door to prevent the cylinder from projecting excessively through the door. Material: plastic light grey 2.03.992 Ø 24 Ø 19 Material: brass matt nickel-plated 219.19.676 Packing: 100 pcs. 1.5 Key blanks, for FH series nickel-plated 209.99.008 Raised flat head screws pages 309 310 Flat head screws pages 302 304

Pushbutton Lock/Central Locking System FH Series Pushbutton Lock, 18 mm diameter Function: Close, by pressing the cylinder Open, only with key Locking pin with M5 internal thread 5 plate levers = 200 key changes #6 18 42 Keyed different Material: zinc, die-cast matt nickel-plated 234.50.600 gold plated 234.50.800 (includes 2 keys) M5 1,5 37 ø7 ø18 12 25 1 Keyed alike: Key change FH1 Material: zinc, die-cast matt nickel-plated 234.50.601 gold plated 234.50.801 (includes 2 keys) Locking socket, ordered separately Ø 13.7 Ø 9 10.7 Material: brass nickel-plated 234.59.994 Packing: 100 pcs. Cylinder Rosettes, ordered separately Ø 24 Ø 19 1.5 Material: brass matt nickel-plated 219.19.676 Packing: 100 pcs. Key blanks, for FH series Flat head screws pages 302 304 Accessories for Central Locking Systems, which are not included such as, Bar Guides, Arresting Pins, Drawer Catches, etc., can be found on page 545. nickel-plated 209.99.008 534

Central Locking System FH Series Side Mount Central Locking System With Lockbar, ø 18 mm Key travel: 180º 5.5 5 plate levers = 200 key changes 16 40 22 3 Ø 1 Keyed different 600 mm bar length Material: Case and backplate: zinc die-cast and steel Bar: aluminum, unfinished Cylinder: zinc die-cast matt nickel-plated 237.30.707 Bar length Keyed alike: Key Change FH 1 600 mm bar length matt nickel-plated 237.30.716 (includes 2 keys) Travel 9 Front Mount Central Locking Cylinder, ø 18 mm Key travel - 180º Lifting pin travel - 180º 5 plate levers = 200 key changes Front view 42 Keyed different Material: Mounting plate: zinc die-cast 18 Cylinder: zinc die-cast Ø 6 17 stroke 38 2 6 44 Side view 22 #5 #5 Ø 18 matt nickel-plated 234.77.705 Keyed alike: Key change FH1 matt nickel-plated 234.77.714 (includes 2 keys) 535 Bar guide Arresting pin 15 Ø 6 Ø 6 38 3 26 Bar guide* Length 16 Arresting pin* Central Locking Bars, can be cut to length Material: aluminum, unfinished Length 600 mm (23 5/8 ) 237.10.002 800 mm (31 1/2 ) 237.10.004 1000 mm (39 3/8 ) 237.10.006 1500 mm (56 ) 237.10.009 Cylinder Rosette, ordered separately 24 7.6 Material: brass matt nickel-plated 219.19.676 Packing: 100 pcs. 17.4 Key blanks, for FH 1 series 209.99.008 Accessories for Central Locking Systems, which are not included such as, Bar Guides, Arresting Pins, Drawer Catches, etc., can be found on page 545. 2

Pushbutton Lock/Central Locking System FH Series For installation in cabinet side panels from 19 mm thick The entire assembly is recessed into the cabinet side panel Ideally suited for installation in side panel next to inset drawers Front Mount in Side Panel Cylinder, ø13mm Key travel - 180º Lifting pin travel - 180º 5 plate levers = 200 key changes Ø4.4 Stroke 8.5 12.5 23 15 Front view 34.5 13 Side view 4.5 Ø13 Different key changes Material: zinc die-cast matt nickel-plated [234.76.600] Keyed alike: Key Change FH 1 matt nickel-plated [234.76.619] (1 pc.= 2 keys and 1 retaining spring) Retaining spring Central Locking Bars, for above lock Can be cut to length 16 11.5 21 10 3 Ø5 Length unfinished 500 mm (19 5/8") [237.09.515] 800 mm (31 1/2") [237.09.551] Length Accessories for central locking systems, which are not included, such as, Bar Guides, Arresting Pins and Drawer Catches, etc. can be found on page 545 Drilling diagram 20 Ø38 (1 1/2") 34 Ø13 (1/2") 3 Arresting pin Bar guide 536

Cam Locks H Series Cam Lock, with cylinder, for vertical mounting Closure travel 90º with key trap (Key can only be removed in the locked position) 5 pin levers = 10,000 key changes Inlaid Lock H Series 537 #8 #6 21 3 1.5 16 3 10 35 20 19 3 50 Ø 19 Ø 20 Ø 25 Ø22 Ø23 Ø28 1.5 36.5 23.5 40 24 1.5 1.5 5 Master keying and General Master key systems available upon request Please include a key plan Please contact Häfele for current delivery time to produce Keyed different Material: Mounting plate: steel Nuts and lever: steel, zinc-plated Cylinder: brass matt nickel-plated 235.03.602 Keyed alike: Key Change H1 matt nickel-plated 235.03.817 (includes 2 keys, 1 cylinder rosette, 1 cam and 2 nuts) *Closure orientation is achieved by repositioning the bolt. Key blanks, for H series Inlay Lock with Cylinder 5 pin levers = 20,000 key changes. Backset = 20 mm Closure travel: 360 0 209.99.044 Keyed different Material: Case: zinc die-cast, matt nickel-plated Cylinder: brass, matt nickel-plated Packing left 230.19.614 1 pc. right 230.19.605 1 pc. drawer 230.19.623 10 pcs. (1 pc. = 2 keys and 1 cylinder rosette) Keyed Alike: Key Change H1 Packing left 230.19.810 1 pc. right 230.19.712 1 pc. drawer 230.19.918 10 pcs. (1 pc. = 2 keys and 1 cylinder rosette) Install between the lock and inside of the door to prevent the lock from projecting excessively through the door. Spacers nickel-plated 230.13.998 Flat head screws pages 302 304 40 2.5

Tambour Door Lock H Series 7.5 22 28 75 Ø7 2.5 13 Lock Case for Tambour Door Material: Face plate: brass-plated #5 Body: steel left 230.37.256 right/drawer* 230.37.201 12.5 14 1.5 17 13 27 ø18 75 22 21 13 17.5 9 Cylinder For Roller Shutter Mortise Lock Case 5 pin levers = 10,000 key changes Backset = 22 mm Closure travel: 180 0 Keyed different 230.23.805 Keyed alike: Key change H1 230.23.814 (2 keys, 1 cylinder rosette) *The backset dimension is reduced by 3 mm on the drawer version. Ø19 Ø24 1.5 Pushbutton Lock/Central Locking System H Series 22 50 Pushbutton Lock, ø 22 mm Function: Closing, by pressing the cylinder Opening, only with key Locking pin with M5 inside thread 5 pin levers = 10,000 key changes Accessories for Central Locking Systems, which are not included such as, Bar Guides, Arresting Pins, Drawer Catches, etc., can be found on page 545 Flat head screws pages 302 304 1.5 M5 36 ø7 ø22 Ø23 Ø28 12 24 1.5 1.5 Material: Case: zinc die-cast Cylinder: brass matt nickel-plated Keyed different 234.58.602 Keyed alike: Key change H1 234.58.611 (2 keys, 1 cylinder rosette) Locking Socket, ordered separately Ø 13.7 Material: brass nickel-plated 234.59.994 Packing: 100 pcs. Ø 9 10.7 #5 538

Central Locking System H Series Central Locking Cylinder, ø 22 mm Closure travel 360º Lifting travel 180º 5 pin levers = 20,000 key changes #5 22 1.5 Ø 6 44 22 17 43 36 Front view 36.5 Side view 1.5 Ø 23 Ø 28 Ø 22 Master keying and General Master key systems available upon request Please include a key plan Please contact Häfele for current delivery time to produce Material: Mounting plate: steel Cylinder: brass matt nickel-plated Keyed different 234.71.605 Keyed alike: Key change H1 234.71.614 (includes 2 keys and 1 cylinder) Rosette 15 Ø 6 Ø 6 38 3 26 Length 16 Central Locking Bars Material: aluminum Length unfinished 600 mm (23 5/8 ) 237.10.002 800 mm (31 1/2 ) 237.10.004 1000 mm (39 3/8 ) 237.10.006 1500 mm (56 ) 237.10.009 Locked Unlocked Key blanks, for H series 209.99.044 539 Arresting pin* Bar guide* Accessories for Central Locking Systems, which are not included such as, Bar Guides, Arresting Pins, Drawer Catches, etc., can be found on page 545 Flat head screws pages 302 304

Spring Bolt Locks H Series #6 7 35 13 8 20 75 64 Spring Bolt Lock, with 18 mm diameter cylinder 5 pin levers = 20,000 key changes Backset = 20 mm Material: Case: plastic Cylinder: brass, nickel-plated matt Keyed different left right white 231.15.700 231.15.600 brown 231.15.100 231.15.000 8 ø18 16 21 Keyed alike: Key change H1 left right white 231.15.701 231.15.601 brown 231.15.101 231.15.001 (includes 2 keys and 1 cylinder rosette) The spring rim lock is available as a mini-bar lock with a telltale window above the cylinder casing. This version is particularly suitable for use on mini-bars in hotel rooms. When the bar is initially unlocked by hotel guest, the red telltale appears above the cylinder, indicating to the room service staff that the guest has probably removed a drink or snack which must be replaced and billed. #6 6 13 35 75 64 Mini-Bar Spring Bolt Lock, with telltale and reset feature 5 pin levers = 20,000 key changes. Backset = 20 mm Material: Case: plastic, brown Cylinder: brass, nickel-plated matt Keyed alike: Key change H1 right [231.10.001] (includes 2 keys) Master keying and General Master key systems available upon request Please include a key plan Please contact Häfele for current delivery time to produce Flat head screws pages 302 304 8 20 8 Ø30 16 20 Telltale Reset Key Key blanks, for H series [231.10.095] 209.99.044 540

Cam Locks High Security Locks on this page meet or exceed ANSI/BHMA Grade 1 cylinder pull and cycle test Approved by the WIC - Woodworkers Institute of California 5/8" Master keying and General Master key systems available upon request Please include a key plan Please contact Häfele for current delivery time to produce 3/8" Mounting Plate for Cam Locks Used where spur washer will not embed into hard surfaces. Measures 2 1/4 x 1 1/4 2 1/4 x 1 1/4 210.02.081 Packing: 25 pcs. 1 1/8" 1/8" 541 RH Door Drawer LH Door 1 1/4" 1 1/4" Cam Locks For drawer, left, or right hand applications 4 pin tumblers = 850 key changes Cam turns 90º, key turns 360º 3/4" Mounting Hole 3/4" Keyed different Material: Flush Lipped/Overlay Mounting Type Material Thickness Maximum Material Thickness brushed chrome Flush 1 1/16 3/4 235.10.400 brushed chrome Lipped/overlay 1 3/16 7/8 235.10.300 satin brass Flush 1 1/16 3/4 235.10.500 satin brass Lipped/overlay 1 3/16 7/8 235.10.600 Packing: 10 PCs. (1 pc. = 2 keys, 2 cams (1 left, 1 right), spur washer, and rosette) Keyed alike Mounting Type: Flush Cylinder length: 1 1/16, Maximum material thickness: 3/4 Keying # s brushed chrome 101 235.10.401 brushed chrome 103 235.10.402 brushed chrome 107 235.10.403 brushed chrome 915 235.10.404 satin brass 107 235.10.503 satin brass 915 235.10.504 Mounting Type: Lipped/Overlay Cylinder length: 1 3/16, Maximum material thickness: 7/8 Keying # s brushed chrome 101 235.10.301 brushed chrome 103 235.10.302 brushed chrome 107 235.10.303 brushed chrome 915 235.10.304 satin brass 107 235.10.603 satin brass 915 235.10.604 (1 pc. = 2 keys, 2 cams, (1 left, 1 right), spur washer, and rosette) Key Blank Material: brass Cat No. Through the use of a shifter, the 360º key travel turns the cam 90º in either direction. Actual application determines which cam position is the locked position. Each lock is furnished with an alternate cam for opposite cam turn. Applications: solid lines show locked position of cam R/H Drawer 210.02.101 Packing: 50 pcs. Replacement Keys Material: brass Keying No. 101 210.02.201 103 210.02.202 107 210.02.203 915 210.02.204 Applications: solid lines show locked position of cam Position of shifter on back of lock Position of shifter on back of lock L/H Drawer

Deadbolt Locks High Security Locks on this page meet or exceed: ANSI/BHMA Grade 1 cylinder pull and cycle test. Approved by the WIC - Woodworkers Institute of California. Cylinder Rosettes, ordered separately Material: brass 57/64 7/8" Mounting Hole Ø 24 brushed chrome 2.14.000 satin brass 2.14.001 Packing: 25 pcs. 5/" 7/8" Ø19 3/4" 1 15/64" 1/4" 1/4" 15/16" 3/4" Cylinder length 15/" 1.5 7/8" 1 21/64" 1 5/8" 5/" 1 15/64" 15/16" 15/" Cylinder length 1 5/8" 1 21/64" The PLUS feature allows you to remove the cylinder from our pin tumbler box locks while the lock remains in place. No mounting screws need to be removed. Simply use a 5/64" hex wrench from the back to Text remove the cylinder for re-keying. Change Master keying and General Master key systems available upon request Please include a key plan Please contact Häfele for current delivery time to produce Door Locks For right or left hand applications 4 pin tumblers = 850 key changes Cylinder length 7/8, Bolt travel 3/4 Surface mounted, requires a 57/64" diam. hole Key turns 360º Keyed different Material: Lock and keys: brass-plated Strike: brass-plated brushed chrome 2.14.400 satin brass 237.22.214 (1 pc. = 2 keys, strike plate, and screws) Keyed alike Keying # s brushed chrome 101 2.14.401 brushed chrome 103 2.14.402 brushed chrome 107 2.14.403 brushed chrome 915 2.14.404 satin brass 107 2.14.503 satin brass 915 2.14.504 (1 pc. = 2 keys, strike plate, and screws) Drawer Locks 4 pin tumblers = 850 key changes Surface mounted, requires a 57/64" diam. hole. Bolt travel 3/4 Key turn 360º Keyed different Cylinder Length brushed chrome 7/8 2.14.300 brushed chrome 1 3/8 2.14.350 satin brass 7/8 2.14.600 satin brass 1 3/8 2.14.650 (1 pc. = 2 keys, strike plate, and screws) Keyed alike - Cylinder Length 7/8, Bolt travel 3/4 Keying # s brushed chrome 101 2.14.301 brushed chrome 103 2.14.302 brushed chrome 107 2.14.303 brushed chrome 915 2.14.304 satin brass 107 2.14.603 satin brass 915 2.14.604 Cylinder Length [1 3/8 ], Bolt travel 3/4 Keying # s brushed chrome 101 2.14.351 brushed chrome 103 2.14.352 brushed chrome 107 2.14.353 brushed chrome 915 2.14.354 satin brass 107 2.14.653 satin brass 915 2.14.654 (1 pc. = 2 keys, strike plate, and screws) 542

Cam Locks Easily converted from 90 0 to 180 travel Key is removable in locked and unlocked position. Includes a straight cam 1 1 / 4 long Master keying systems are not available Keyed alike, key # 001 Keyed different, key # s 001-100 Ø 24 L (1 1/4") 16 19.5 Rosette Requires 19 mm ( 3 4 ) diameter hole 28 (1 1/8") 19.5 Offset cams increase (out) or decrease (in) dim. L by offset dimension of cam. Travel Example: If dim. L = 30 mm and 6 mm offset cam is selected, then in = 24 mm and out = 36 mm Cam Locks, for wood, metal, or plastic, with straight cam mm (1 1 4 ) long. 5 Plate levers Key travel: 90 or 180 Material: zinc die-cast, plated Accessories: steel For 16 mm ( 5 8 ) material, Dim. L = 25 mm (1 ) Finish Keyed Different Keyed Alike chrome-plated 235.12.200 235.12.221 bright brass 235.12.800 235.12.821 black polished 235.12.300 235.12.1 Packing: 100 pcs. 20 pcs. (1 pc. = 2 keys, prong washer, hex nut, rosette, 90 and 180 stop washers) For 19 mm ( 3 4 ) material, Dim. L = 30 mm (1 1 8 ) Finish Keyed Different Keyed Alike chrome-plated 235.12.220 235.12.241 bright brass 235.12.820 235.12.841 black polished 235.12.0 235.12.341 Packing: 100 pcs. 20 pcs. (1 pc. = 2 keys, prong washer, hex nut, rosette, 90 and 180 stop washers) 90 22 mm (7/8") 16 mm (5/8") 37 mm (1 1/2") For 25 mm (1 ) material, Dim. L = 35 mm (1 3 8 ) Finish Material Keyed Different Keyed Alike chrome-plated 235.12.240 235.12.261 bright brass 235.12.840 235.12.861 black polished 235.12.340 235.12.361 Packing: 100 pcs. 20 pcs. (1 pc. = 2 keys, prong washer, hex nut, rosette, 90 and 180 stop washers) Key blank Material: brass Finish Cat No. nickel-plated 209.99.700 Replacement Key #001 Finish Cat No. nickel-plated 209.99.701 543 45 mm (1 3/4") 11 mm 2 mm 30.3 mm (1 3/16") 25 mm (1") 16 mm (5/8") 19 mm (3/4") 5.5 mm (1/4") 1 mm Offset cams, order separately (replace straight cams), yellow chromate Offset 3 mm ( 1 8 ) 219.13.910 6 mm ( 1 4 ) 219.13.930 9 mm ( 3 8 ) 219.13.950 Packing: 20 pcs. Glass door lock, for 1/8-3/8 thick glass Key travel: 90 Material: zinc, die-cast, chrome-plated Cam and strike plate: yellow chromate Back plate: zinc, bright Packing Keyed Different 233.11.200 100 pcs. Keyed Alike 233.11.201 20 pcs. (1 pc. = 2 keys, hex nut, back plate and strike plate)

Cam Locks 15 (9/16 ) Key turn is 90 degrees Key is removable in locked and unlocked position Master keying or key plans are not available Keyed alike Keyed different, 168 possibilities Key changes randomly selected for keyed different option 16 (5/8 ) Ø19 (3/4 ) Cam Locks, 16 mm (5/8 ), Dim.L=25 mm (1 ) Includes a straight cam 1 9/16 long 5 plate levers Material: zinc alloy; Finish: chrome-plated Item No. keyed different 235.20.200 keyed alike 235.20.201 *Packing: 35 pcs. (2 keys, 1 hexagon nut, cam plate and washer) 2 (1/16 ) Cam Locks, 19 mm (3/4 ), Dim.L=30 mm (1 1/8 ) Includes a straight cam 1 9/16 long 5 plate levers Material: zinc alloy; Finish: chrome-plated Item No. keyed different 235.20.210 keyed alike 235.20.211 *Packing: 30 pcs. (2 keys, 1 hexagon nut, cam plate and washer) Ø24 (1 ) 16 (5/8 ) 5 (3/16 ) 3 (1/8 ) 48 (1 7/8 ) 15 (9/16 ) 40 (1 5/8 ) Offset Cams, order separately (replace straight cams) ; Finish: yellow chromate Offset Item No. 3 mm (1/8 ) 219.13.910 6 mm (1/4 ) 219.13.930 9 mm (3/8 ) 219.13.950 *Packing: 20 pcs. 543A

Cam Locks Economical drawer locks Key is removable in locked and unlocked position Master keying systems or key plans are not available Keyed alike Keyed different, 168 possibilities Key changes randomly selected for keyed different option 40 (1 5/8 ) Ø18 (11/16 ) 30 (1 3/16 ) 15.7 (5/8 ) Ø22 (7/8 ) 9 (3/8 ) 38 (1 1/2 ) Drawer locks, for wood drawers For 19 mm (3/4 ) material 5 Plate levers Throw: 9 mm (3/8 ) 180 degree key rotation Material: zinc alloy; Finish: nickel-plated 36 (1 7/16 ) 52 (2 1/16 ) 24 (1 ) 5 (3/16 ) Item No. keyed different 230.35.200 keyed alike 230.35.201 *Packing: 25 pcs. (includes 2 keys and 1 rosette) 36 (1 7/16 ) 5.5 (1/4) (2 places) 35 (1 3/8 ) 1.5 (1/16 ) Spacer Place between lock and inside of drawer to control how much lock protrudes through face. Material: cardboard Item No. 210.02.082 543B 15 (9/16 ) 15 (9/16 ) 39 (1 9/16 ) 47 (1 7/8 ) 27 (1 1/16 ) (1 1/4 ) Glass Door Lock, for single door For 3/16 1/4 thick glass Material: zinc alloy; Finish: chrome-plated Item No. keyed different 233.21.200 keyed alike 233.21.201 *Packing: 25 pcs. (includes 2 keys, 1 steel front plate, 1 plastic washer, 1 hexagon nut, 1 straight cam and 1 steel strike) 1 (1/ ) Ø22 (7/8 ) 4.5 (3/16 ) 16 (5/8 ) 25 (1 ) 2 (1/16 ) Ø18 (11/16 ) 27 (1 1/16 ) Ø3.8 (1/8 ) 11 (7/16 ) 46 (1 13/16 ) 1 (1/ ) 57 (2 1/4 )

Drawer Locks Economical drawer locks Key is removable in locked and unlocked position. Master keying systems are not available. Keyed alike, key # 001 Keyed different, key # s 001-100 36mm 5.5mm (2 places) 35mm 1.5mm 36 (1 3/8") Rosette Spacer Place between lock and inside of drawer to control how much lock protrudes through face. Material: cardboard Flat head screws pages 302 304 28 (1 1/8") 28 (1 1/8") 22 (7/8") 210.02.082 L 9 (3/8") Drawer Locks, for wood drawers 5 Plate levers Throw: 9 mm ( 3 8 ) 180 key rotation For 19 mm ( 3 4 ) material Backset = 19 mm ( 3 4 ) Dim. L = 22 mm ( 7 8 ) Material: zinc die-cast, plated Accessories: steel Keyed Different Keyed Alike chrome-plated 235.14.200 235.14.221 black polished 235.14.300 235.14.1 Packing: 100 pcs. 50 pcs. (includes 2 keys and 1 rosette) For 25 mm (1 ) material Backset = 19 mm ( 3 4 ) Dim. L = 29 mm (1 1 8 ) Material: zinc die-cast, plated Accessories: steel Keyed Different Keyed Alike chrome-plated 235.14.210 235.14.231 bright brass 235.14.810 235.14.831 black polished 235.14.310 235.14.331 Packing: 100 pcs. 50 pcs. (includes 2 keys and 1 rosette) For mm (1 1 4 ) material Backset = 19 mm ( 3 4 ) Dim. L = 35 mm (1 3 8 ) Material: zinc die-cast, plated Accessories: steel Keyed Different Keyed Alike chrome-plated 235.14.240 235.14.261 bright brass 235.14.840 235.14.861 black polished 235.14.340 235.14.361 Packing: 100 pcs. 50 pcs. (includes 2 keys and 1 rosette) Key blank Material: brass Cat No. nickel-plated 209.99.700 Replacement Key #001 Cat No. nickel-plated 209.99.701 #6 544

Central Locking System Accessories 40 16 M4 set screw, with 2 mm hex socket Extension 19 6 19 The guides and arresting pins are designed for a bar section measuring 16 x 3 mm. Bar guide, open type Material: plastic Cat No. white 237.23.720 Packing: 200 pcs. 38 1 5.5 Bar guide, open type 19 Cat No. galvanized 237.23.006 Packing: 100 pcs. 19 Arresting pin, total length = 8 mm Material: zinc die-cast Cat No. 237.22.027 Packing: 100 pcs. (includes 1 slotted set screw and 1 threaded bolt) 40 Bars for central locking systems Material: aluminum 3 Length Cat No. 600 mm (23 5 8 ) 234.78.033 820 mm ( 1 4 ) 234.78.051 Mounting arrangement for a right hand drawer. Guides can be used for surfacemounted (left) or recessed (right) bars by reversing their position. 545 19.6 Ø7 16 1.8 20 7 6 8 14 25.5 8 4 1.5 Drawer catches, screw-mounted nickel-plated left 237.16.752 right 237.16.707 Packing: 100 pcs. 4. 8 #5 35 (1 3/8") 6 (1/4") 12 2 37 16 42 (1 3/4") 15 25 20 1.4 3.2 Arresting Pin 57 (2 1/4") Can be used left or right Total Length The drawer can be closed even with the pin in the locked position (top); the drawer is then locked in position (bottom). Ø7 6 Ø7 Arresting Pin, use with extensions below Material: zinc die-cast nickel matt 237.22.100 Packing: 100 pcs. (includes 1 slotted set screw) Extensions with M4 threads, for arresting pins Length zinc-plated 17 mm 237.22.189 20 mm 237.22.214 25 mm 237.22.269 30 mm 237.22.312 Packing: 100 pcs. 15 35 (1 3/8") 6 (1/4") 37 12 16 25 20 57 (2 1/4") Bar guides, mm compatible Use as spacer for mounting between epoxy slides and cabinet interior (makes recessing of central locking bars unnecessary). Material: plastic black 237.23.310 Packing: 100 pcs. (includes 1 slotted set screw) All the central locking systems illustrated on pages 534-539 use accessories with these dimensions. 2 42 (1 3/4") 1.4 3.2 13 13 VARIANTA 5 #5 Flat head screws pages 302 304 Varianta screws page 311

Built-In Central Locking System - Rear Panel Hooks are spring-loaded, the drawer can be kept open as needed and shut later Hooks are adjustable on the locking bar enabling them to be individually adapted to drawers of varying heights Movement of the locking bar is affected by a roller, mounted at the upper end of the bar and actuated by a wedge-shaped driver The central locking system is designed to be mounted on the rear panel of vertical multi-drawer cabinets. In the locking process, the hooks attached to the bar engage the loop catches on the drawers as they descend, locking the drawers in position. Roller For Vertical Lock Bar Cat. No unfinished 237.42.010 Bar Guide zinc-plated 237.42.029 Pan Head #6 Roller 40 Pushbutton lock Horizontal Activator Bar, 600 mm length For use with pushbutton locks unfinished 237.42.207 Angled Activator For use with deadbolt locks zinc-plated 237.42.047 Deadbolt lock 40 Roller Spring hook Spring hook Spring Hook zinc-plated 237.42.001 Bar guide Bar guide Vertical bar Rear panel Drawer Vertical bar Rear panel Drawer Lock Strike zinc-plated 237.42.038 Push-button lock must be ordered separately. See pages 534 or 538. Pan head screws pages 304 305 Vertical Lock Bar, 600 mm length (with attached spring and bar guide) Deadbolt locks must be ordered separately. See pages 531 or 542. unfinished 237.42.109 Packing: 1 set 12 6.5 8.5 Ø3.5 Ø13 M5 4 8 Connecting Piece For Push-button Cylinder 600 mm length Material: brass 234.58.997 (includes 1 countersunk screw) 546

Sliding Door Locks 7 (5/16") Locking travel A (right) 9.5 (5/8") 5 1.5 40 21 8 18 11 Push-button/rotary cylinder lock A rotary lever provides additional protection against pushing-in of sliding doors (especially tall doors) with 5 pins levers = 10,000 different key changes are possible Function: locking - only with a key unlocking - only with a key Locking travel: 90º A (right) 22 #6 Material: Housing: zinc alloy Cylinder: brass 50 35 matt nickel-plated Keyed Different 234.52.600 Keyed Alike: Key Change H 1 234.52.815 (includes 2 keys, 1 cylinder rosette and 1 strike plate) 1.5 7.5.5 24 ø22 1.5 Ø23 1.5 Ø28 547 Flat head screws pages 302 304

Sliding Door Locks Glass Door Cylinder Lock, with plug-in cylinder For installation in glass panels from 6-8 mm with key trap (key only removable when locked) 75 key changes Closure travel: 90 Accessories: 2 keys, 2 rubber washers and 2 mounting screws 25 3 Ø 7 2 16 Ø 16 6-8 mm Glass thickness 20 Screws Backplate Rubber washers Frontplate Mounting Diagram Cylinder Material: Housing zinc die-cast, chrome-plated Cylinder lock: steel, nickel-plated Keyed different [233.22.205] Keyed alike Key Change 978 [233.22.214] 901 [233.22.223] 902 [233.22.2] 903 [233.22.241] 904 [233.22.250] 906 [233.22.269] Packing: 20 pcs. Wood Door Cylinder Lock, with plug-in cylinder For installation in wood panels from 16-19 mm with key trap (key removable only when locked) 75 key changes Closure travel: 90 7.5 Ø 18 30 2 20 Ø 17 Material: Housing: zinc die-cast, chrome-plated Cylinder lock: steel, nickel-plated Keyed different [234.55.209] Keyed alike: Key Change 978 [234.55.218] Packing: 20 pcs. (includes 2 keys and 1 rosette) Wood applications Backplate Mounting diagram Frontplate Cylinder Key and cylinder only Suitable for cylinder lock with plug-in cylinder, for wood and glass panel installation. Keyed different Material: nickel-plated [233.22.009] Packing: 20 pcs. Key and cylinder only Material: nickel-plated Keyed alike Key Change 978 [233.22.018] 901 [233.22.027] 902 [233.22.036] 903 [233.22.045] 904 [233.22.054] 906 [233.22.063] Packing: 20 pcs. 548

Sliding Door Locks Glass Door Cylinder Lock Glass Thickness 3 (1/8 ) 25 (1 ) Ø7.5 (5/16 ) 17 (11/16 ) 22 (7/8 ) 2 (1/16 ) New Item 16 (5/8 ) With Plug-in Cylinder For installation in glass panels for 5-7 mm (3/16-5/16 ) 50 Key Changes Closure travel: 90 No replacement keys available Material: Housing: zinc die-cast; Finish: chrome-plated Cylinder lock: steel Keyed different 233.22.207 Keyed alike #851 233.22.217 (includes 2 keys, 2 rubber washers and 2 mounting screws) 548 A

Glass Door Locks 29 26 Glass Door Pin Lock backplate, screw-mounted for glass thickness 4-6 mm with 6 plate levers = 1000 Key Changes Closure travel: 90 ø5 9 8 12 ** ø23 20 Glass drilling diagram. Bore glass before glass is tempered. Material: Housing and cylinder: zinc die-cast nickel-plated matt Keyed different 233.05.600 Keyed alike: N 7921 PL 233.05.601 (each pc. includes 2 keys, 2 rubber spacers and 2 screws) 125 105 Glass door lock with plate cylinder with clip-on rack for glass thicknesses from 4-8 mm cylinder slides on to rack with 5 plates = 100 different key changes possible Closure travel: 180 Ø20 10 26.5 Material: Housing and cylinder: zinc alloy Rack: steel nickel-plated matt Keyed different 233.01.600 Keyed alike: N 7921 PL locking 233.01.601 (includes 2 keys) 24.5 18 16 28.5 43 9 2 28.5 9 2 11.5 Mounting diagram Glass Door Lock - non boring Clamps to glass with two set screws; pad is included to protect glass For 6 mm (1/4 ) thick glass Bolt travel - 9 mm (3/8 ) Key is removable in both locked and unlocked position. Closure travel: 180º, plastic black 233.12.600 Packing: 800 pcs. (each pc. includes 2 keys and protective pad) Mounting diagram 549

Glass Door Locks 28 15 10 2 15 1 3 21 2.5 42 26 20 Ø22 30 26 ** 6 Glass Door Cylinder Cam Locks nut-mounted for glass thickness 4-10 mm** Cam rotation 90 with key trap with 5 pin levers = 20,000 key changes Locked Locked Keyed different Material: Trim caps: zinc die-cast Cylinder: brass w/ Stock A 90 B 90 nickel-plated polished [233.33.700] [233.33.710] brass-plated polished [233.33.806] [233.33.851] 26 26 26 Keyed alike: key change H1 A 90 B 90 nickel-plated polished [233.33.701] [233.33.711] brass-plated polished [233.33.815] [233.33.860] (includes 2 keys, 1 cam, 3 nuts, 1 angle strike, steel clamp plate and 1 plastic washer) 30 3 56 5 5 Strike plate, glass door cam lock Angle strike Ø25.5 26 M6 1 30 Ø25.5 25 23.5 2.5 10 8 6 42 26 13 1 26 Gap 26 4 min. 26 26 26 26 Glass door cam lock Locking Travel A shown - Closure orientation is achieved by re-positioning the cam. Overlay application 2.5 23.5 26 26 Glass drilling diagram. Bore glass before glass is tempered. Inset application 1 28 ** Screws: M6 x 10 mm for up to 8 mm glass thickness M6 x 12 mm for up to 10 mm glass thickness Strike plate to glass door cam lock 2 part, screw-mounted for glass thickness, 4-10 mm** allows two doors to be locked with one lock Material: zinc die-cast nickel-plated polished 233.40.712 brass-plated polished 233.40.810 (includes 2 M6 screws, 2 clamp plates and 1 plastic washer) Key blanks, for H series 209.99.044 550

Espagnolette Locking System A three point locking system designed for tall wardrobe type cabinets Keeps top and bottom of doors secure and aligned Can be used on doors up to 78 tall Top Catch Hook Profile Rod 11 6 Rod Guide Upper rod length Locks Internal cabinet height 20 20 Strike Plate Rod Guide Profile Rod Bottom Catch Hook Centre of lock case 30 6 Lower rod length 11 551

Espagnolette Locks 3 5 6 14 8 6 15 8 30 15 4.5 37.5 64 75 Lock case for lever bit key, backset 15 mm Closure travel: 180 0 Screw-mounted Left or right handed Keyed alike Material: zinc die-cast left right nickel-plated 225.56.654 225.56.609 brass antique [225.56.053] [225.56.003] Packing: 10 pcs w/ Stock Ø 19 Ø 24 1.5 3 5 6 14 Ø 18 23 15 8 30 15 37.5 64 75 Lock case with Ø 18 mm cylinder, backset 15 mm Left or right handed 5 plate levers = 200 key changes Closure travel: 180 Material: zinc die-cast w/ Stock nickel-plated Keyed different left right [225.53.653] [225.53.608] Keyed alike left right Key change FH1 [225.53.911] [225.53.813] Packing: 1 pc (includes 2 keys and 1 cylinder rosette) Ø 19 Ø 24 1.5 3 5 6 14 Ø 18 21 15 8 30 15 37.5 64 75 Lock case with Ø 18 mm cylinder, backset 15 mm Left or right handed 5 pin levers = 10,000 key changes Closure travel: 180 Material: zinc die-cast nickel-plated Keyed different left right 225.58.658 225.58.603 Keyed alike left right key change H1 225.58.916 225.58.818 (includes 2 keys and 1 cylinder rosette) Ø 19 Ø 24 1.5 3 5 6 14 Ø 18 15 Choice of decorative keys on page 495. Flat head screws pages 302 304 42 7 40 25 37.5 64 75 Lock case with extended Ø 18 mm cylinder, backset 25 mm To accommodate furniture knob-handle made to your own design. Left or right handed 5 pin levers = 10,000 key changes Closure travel: 180 Material: zinc die-cast nickel-plated Keyed different left right 225.62.661 225.62.616 Keyed alike left right key change H1 225.62.910 225.62.812 (includes 2 keys and 1 cylinder rosette) Master keying and General Master key systems available upon request Please include a key plan Contact Häfele for current delivery time to produce 552

Espagnolette Lock Accessories 5 6 Profile rod, 2000 mm length Material: drawn steel nickel-plated 226.07.209 bronzed 226.01.500 #6 26.5 3 10 13.5 13 15 Top and bottom catch hooks, screw-mounted Material: zinc die-cast with plastic guides nickel-plated 226.30.790 brass-plated [226.30.520] brass antique 226.30.120 Packing: 100 pcs. #6 26.5 10 15 Rod guides, screw-mounted Material: zinc die-cast with plastic guides Packing nickel-plated 239.75.796 20 pcs. brass-plated 239.75.501 1 pc. brass antique 239.75.104 1 pc. 553 #6 Ø 7.5 26 21.5 14.5 3 Locking bolt, screw-mounted plate, adjustable Material: zinc die-cast Packing nickel-plated 226.57.708 200 pcs. brass-plated [226.57.503] 20 pcs. brass antique 226.57.101 200 pcs. Flat head screws pages 302 304

Push-button Locks Locks Well suited for the recreation or boating industry, these locks operate by push-button, without a key. All push-button locks can be used in wet areas. When locked there is no protrusion of the knob. Push-Lock featuring push-button locking mechanism, used as a deadbolt lock for doors or drawers. Push-Lock featuring push-button locking mechanism. Image Change Image Change #6 Image Change Image Change Image Change Push-Lock featuring push-button locking mechanism screw-mounted order push-button knobs and rosettes separately Material: plastic nickel-plated, matt [211.63.600] white [211.63.700] brown [211.63.100] Packing: 100 pcs. Number Change Backset 25 4 27 7 45 64 78 39 Push-Lock featuring push-button locking mechanism, profile rod version for 6 mm Ø profile rod for left or right-hand door application 25 mm backset order push-button knobs and rosettes separately Material: plastic nickel-plated, matt 225.22.603 brown 225.22.103 Packing: 100 pcs. (includes 1 pair of catch hooks) 20 5 Backset 25 4 4 11 28 30 Profile rod locks come with colour-coordinated catch hooks: matt nickel-plated locks, zinc die-cast white or brown locks, plastic Shim is used in conjunction with rosette for 19 mm (3/4 ) material For 16 mm (5/8 ) material - use 1 pc. shim For 13 mm (1/2 ) material - use 2 pcs. stacked together Flat head screws pages 302 304 13 7 25 3.2 (1/8") Shim for push-button locks Placed between lock and inside of door. Eliminates the need for different rosette heights. Material: plastic white 211.60.990 Packing: 1000 pcs. 64 45 554 78

Push-Button Knobs and Rosettes Push-Button Knob, for 13-19 mm (1/2-3/4 ) door thickness 23 19 20 14 Material: plastic, electro-plated nickel-plated matt 229.01.677 brass-plated polished 229.01.873 chrome-plated polished 229.01.270 black 229.00.652 Packing: 100 pcs. Rosette, for 13 mm (1/2 ), 16 mm (5/8 ), or 19 mm (3/4 ) door thickness 38 34 9.5 8 12.5 5 12 2 For 13 mm ( 1 2 ) Door Thickness For 16 mm ( 5 8 )Door Thickness For 19 mm ( 3 4 )Door Thickness 13 16 19 14 8 14 5 14 2 555 Material: plastic, electro-plated Packing 13 mm ( 1 2 ) 16 mm ( 5 8 ) 19 mm ( 3 4 ) nickel-plated matt 229.03.608 229.03.617 229.03.626 100 pcs. brass-plated polished 229.03.804 229.03.813 229.03.822 100 pcs. chrome-plated polished 229.03.220 100 pcs. white 229.02.709 229.02.718 229.02.727 100 pcs. black 229.02.650 229.02.665 229.02.670 10 pcs. 26

Push-button Knobs and Rosettes Solid Brass Meets 96 hour salt spray test Proper protection should be placed over rosettes before pounding in to prevent marring Oval rosettes include alignment pin to keep rosette from twisting Push-button knob, for 13-19 mm (1/2-3/4 ) door thickness Brass 23 19 Push-Button Material: brass, plated, lacquered brass polished 229.10.820 chrome polished 229.10.220 nickel-plated, matt 229.10.0 black nickel 229.10.620 brass satin 229.10.520 Packing: 25 pcs. Rosette, round, for 13 mm (1/2 ), 16 mm (5/8 ), or 19 (3/4 ) door thickness 38 Brass 34 9.5 8 12.5 5 12 2 Material: brass, plated, lacquered 13 mm ( 1 2 ) 16 mm ( 5 8 ) 19 mm ( 3 4 ) brass polished 229.11.810 229.11.815 229.11.820 chrome polished 229.11.210 229.11.215 229.11.220 nickel-plated, matt 229.11.310 229.11.0 black nickel 229.11.610 229.11.615 brass satin 229.11.510 229.11.515 Packing: 25 pcs. Rosette, oval, for 19 mm (3/4 ) door thickness For 16 mm (5/8 ), or 13 mm (1/2 ) material, use shim found on page 554. Brass 12.5 Alignment Pin 2 34 45 Material: brass, plated, lacquered brass polished 229.11.840 chrome polished 229.11.240 nickel-plated, matt 229.11.740 black nickel 229.11.640 brass satin 229.11.540 Packing: 25 pcs. 556

Push-Button Mini, Knobs and Rosettes 35 19 5.5 Backset 15 36 48 24 20 #6 Push-Lock Mini with push-button locking applicable for left or right hand backset: 15 mm Material: plastic nickel-plated, matt 211.61.606 Packing: 100 pcs. (order knobs and rosettes separately, see below) 5 1.8 20 Push-button Mini 16 Rosette Mini 24.5 16 For 16 mm (5/8") material only Material: plastic nickel-plated, matt push-button 229.07.606 rosette 229.09.600 Packing 100 pcs. 557 9 1.7 Flat head screws pages 302 304

Magnetic Lock SAFE FIX For all types of doors 16-24 mm thick, particularly suitable as child protection The SAFE FIX magnet opener unlocks the bolt so that the door can be opened The door catch consists of rim lock counterpiece and pin extension Screw mounted Pan Head #5 Material: plastic Counterpiece and magnetic opener: steel nickel-plated, white Door catch 245.41.791 SAFE FIX magnet opener 245.41.791 SAFE FIX magnet opener 245.41.799 Packing: 1 pc Number Change Function 2 4 3.3 Pin extension 30 37 40 28 11 Counterpiece 25 10 6 25 SAFE FIX Magnetic opener Spring rim lock Magnetic opener 8 20 3 4 19 Ø7 Pan head screws pages 304 305 558

Combination Locks The combination lock where 3 dials replace the need for keys. Private containers are secure with your own personal code. The code can be changed and reset. Available in horizontal or vertical orientation, with or without key override function. Code Scrambling Feature: After opening or closing the lock, the dials automatically scramble no one can see the code. Code Scrambling with Key Override: After opening or closing the lock, the dials automatically scramble hiding the secret code. The overriding key opens the lock without having to know the code (if the code is forgotten). For instance, service people can open the locker to exchange towels, yet the code remains secret. Each lock comes with instructions explaining how to set personal code. For thin materials such as metal, glass, etc. please see back plate adapter below. Horizontal Right hand side of panel Horizontal Left hand side of panel Straight cam 44 (1 3/4") 33 (1 5/16") 24 (15/16") 13 to 19 (1/2" to 3/4") 2.5 (1/8") R12 24 (15/16") Back Plate Adapter Used for installation in metal, glass, or plastic For thicknesses 1 mm (3/64") 9 mm (3/8") Material: glass fiber reinforced polyamide Cat. No black 231.16.399 559 Lock body 63.5 (2 1/2") = Cut-out dimensions R2 R0.5 4 (5/") 6 (1/4") 4.7 (3/16") 20 (13/16") Combi-Code Lock 1157, with code scrambling feature. For installation in wood thicknesses from 13 mm (1/2") to 19 mm (3/4") Cam travel is 180º, and can be re-oriented. Material: Body, knob, and back: glass fiber reinforced polyamide Cam: steel, galvanized Orientation black horizontal right 231.16.300 horizontal left 231.16.301 vertical 231.16.302 (includes 1 straight cam with snap ring for attaching cam, 1 back plate, 2 affixing screws, and installation instructions) Vertical applications 72.5 (2 7/8") 28 (1 1/8") Horizontal Right hand side of panel Vertical applications 20 (13/16") Horizontal Left hand side of panel 72.5 (2 7/8") 28 (1 1/8") Combi-Code Lock 1153, with code scrambling, and override key For installation in wood thicknesses from 13 mm (1/2") to 19 mm (3/4") Cam travel is 180º, and can be re-oriented. Material: Body, knob, and back: glass fiber reinforced polyamide Cam: steel, galvanized Orientation black horizontal right 231.16.310 horizontal left 231.16.311 vertical 231.16.312 (includes 2 keys, 1 straight cam with snap ring for attaching cam, 1 back plate, 2 affixing screws, and installation instructions)

Mastercombi Locker Locks Locks Specially designed for Häfele. This trim piece, used in combination with the Mastercombi Lock, creates a clean professional look in wood doors. Mastercombi in connection with a Häfele Flush Handle for installation in wood doors 19 mm (3/4 ) thick. 6 (1/4 ) 8 (5/16 ) #6 Spring bolt Ø 80 (3 3/16 ) Ø 5 (3/16 ) 3 (1/8 ) 8 (5/16 ) 85 (3 3/8 ) 23 (15/16 ) Ø 5 (3/16 ) 48 (1 7/8 ) 7 (5/16 ) Special Flush Handle Material: nylon light grey (RAL 7035) 231.14.500 black (RAL 9005) 231.14.300 Covering plate Mounting plate 19.5 (3/4 ) 2 21 (7/8 ) 43 (1 11/16 ) Setting a new combination on the Mastercombi: Turn the number dial at least one full turn clockwise, and then set 0 to the red mark. Insert control key and turn 90 clockwise. The spring bolt is now retracted and the door can be opened. Now depress and hold in the spring-loaded button on the rear of the lock housing. At the same time turn the number dial with the other hand 2 divisions clockwise to the 48 mark. Now release the spring-loaded button. Continue turning the dial clockwise until the adjusting spring can be heard to engage. The next combination is now set. Lock the cabinet door and withdraw the control key. Remember to register the new combination. Flat head screws pages 302 304 23 Special Strike Plate For Mastercombi installations in wood doors. nickel-plated 231.13.706 Packing: 50 pcs. 45 40 35 560

25 Locks Mastercombi Locker Locks Please order left or right lock per diagram below. Mastercombi combination locks are suitable for safe deposit boxes, wardrobes and lockers. The rust protected steel lock housing is theft-proof and sturdy with rust-proof internal elements. A high security system as each lock comes with 5 different, pre-programmed, 3 digit number combinations. Please Note: Different combinations can not be chosen or programmed by end user. Control key is required to set a new combination. (order separately) Door hinged on left = Left lock Door hinged on right = Right lock Mastercombi for the installation in metal doors up to 3 mm (1/8 ) thick For wood doors see extension set below. steel cabinet Spring Bolt 5 (3/16 ) 56 (2 3/16 ) 17 (11/16 ) 23 (15/16 ) 19 (3/4 ) 6.5 (1/4 ) 6.5 (1/4 ) 5.5 (7/ ) 51 (2 ) locked 6.5 (1/4 ) unlocked Back view 56 (2 3/16 ) 68 (2 11/16 ) 48 (1 7/8 ) Front view 73 (2 7/8 ) Mastercombi lock With 5 different, pre-programmed safety combinations and control key function (order separately) With easy grip and pull handle With spring bolt Material: Lock housing: steel, galvanized and chromatized Housing cover: stainless steel, rustproof Rotary knob: plastic, black Cylinder: brass Cat. No left hand 231.13.055 right hand 231.13.000 (includes 2 nuts with integrated lock washer) Control key for Mastercombi (order separately) 231.13.091 40 35 45 30 5 5 20 10 15 Extension set for Mastercombi, allows for installation in wood doors from 17.5 mm (11/16 ) to 19 mm (3/4 ) thick. Lock with spring bolt 561 6.5 (1/4 ) 17 (11/16 ) 56 (2 3/16 ) Marking Marking Marking Material: Lock housing: steel galvanized and chromatized 231.14.950 Packing: 1 set (includes 1 locking pin, 1 cylinder pin, 1 driver extension and 2 screw extensions) Wood Application 23 (15/16 ) 27 (1 1/16 ) Order strike plates separately, see next page

Strike Plates 4.2 Strike Plate Pan Head #8 black 239.61.337 6 6 11.5 22 4.2 Strike Plate 12.5 6 11.5 Pan Head #8 black 239.61.8 11.5 4.2 Angle Strike Pan Head #8 19 19 black 239.61.319 22 8 9 13 Strike Plate #6 Packing 20 33 1 nickel-plated 239.40.703 500 pcs. black 239.40.301 100 pcs. brass-plated 239.40.507 100 pcs. Flat head screws pages 302 304 Pan head screws pages 304 305 Raised flat head screws pages 309 310 20 12 13 1 1 40 Strike Plate 18 Strike Plate 40 nickel-plated 239.41.022 Packing: 100 pcs. #6 nickel-plated 239.41.013 brass-plated 239.41.513 bronzed 239.41.111 Packing: 100 pcs. #5 562

Strike Plates 25.5 29 12 7.5 41 Strike Plate With adjustment slots #6 nickel-plated 239.47.604 10 1.5 Packing: 100 pcs. 10 11 47 37 45 5 Strike Plate For series drilled holes with adjustment slots Material: plastic VARIANTA 3 VARIANTA 5 Packing white 239.44.774 100 pcs. brown 239.44.176 10 pcs. 60 (2 3/8") 33 (1 9/") 13 (1/2") 0.5 (1/64") Strike Plate #5 nickel-plated 239.05.704 brass-plated 239.05.508 Packing: 100 pcs. 6 (7/") 3 (1/8") 563 30 58 57 10 1.2 6 2.5 13 1.5 Strike Plate brass-plated 239.02.516 Packing: 100 pcs. Strike Plate #5 #8 nickel-plated 239.26.703 brass-plated 239.26.507 Packing: 100 pcs. Raised flat head screws pages 309 310 Flat head screws pages 302 304 Varianta screws page 311

Profile Strips Stop Strips (hard and soft PVC combined), for sealing of cabinets with two doors but without a center panel 2 12 25 2.5 4.8 Stop Strip, screw-mounted Material: plastic #5 white 239.92.750 brown 239.92.150 (2.5m (98 ) 1.5 10 20 Stop Strip, with pressure sensitive adhesive Material: plastic brown 239.91.100 black 239.91.300 (2.5m (98 ) 2 20 30 Stop Strip, screw-mounted Material: plastic white 239.90.700 brown 239.90.100 (2.5m (98 ) Flat head screws pages 302 304 0.8 17.8 11 Peel-off Soft PVC Self-adhesive Door sealing profile, self-adhesive Material: plastic, with soft PVC lip white 716.60.707 brown 716.60.109 (2.5m (98 ) 564

Automatic Door Bolt This automatic door bolt locks double panel doors without additional stop strips or furniture bolts. The elegant door catch is mounted inside the cabinet. The hook and wedge element are mounted to the inside of either the right or left door. The door with the hook element must be closed first. Upon closing the second door, the wedge element automatically blocks the door catch. The door with the wedge element must now be made lockable with a lock. 36 8 10 10 29 17 10 4.2 3.5 11.5 2 31.5 11.5 44 50 Material: zinc, die-cast nickel-plated 245.58.754 bronzed 245.58.156 Packing: 20 pcs. #6 Wedge Element min. door width = 406 mm (16 ) 10 9.5 3.5 565 Hook Element Pan head screws pages 304 305

Dialock Furniture Locking System Dialock in Furniture and Casework The convenient and safe locking system from Häfele. Storing files and valuables safely is a prime challenge to a modern reliable locking system. With the DIALOCK furniture locking system, drawers, compartments, shutters, etc. are locked electromagnetically. The individual locking units are controlled by a central component the Dialock Furniture Terminal (DFT). (DFT) meets all requirements for convenient electronic locking. Different levels of expansion are feasible so that every planner has optimum design freedom. The advantages ( recore ) Centralized opening and locking of complete cabinet systems. If a Key ( electronic key ) is lost, the locking authorization can be withdrawn without having to replace locks on all the pieces of furniture. The DIALOCK locking system can be extended to entrance doors, offices, or buildings without any problems or changes to the locking units or the (DFT). The User Key can be reprogrammed and reused. Specialized consultants are available for further levels of expansion, such as facility management with time and attendance. The components The DIALOCK furniture locking system consists of the following components: Dialock Furniture Terminal (DFT) with antenna DFANT DIALOCK Electronic Key set Electric Furniture Lock (EFL) Distribution block or output extender Dialock Furniture Terminal (DFT) with antenna DFANT The Dialock Furniture Terminal (DFT) is suitable for concealed installation. From the Dialock Furniture Terminal (DFT), electric furniture locks (EFL) are controlled. In order to operate the system, a DIALOCK Key (the electronic key ) is presented in front of the external antenna. The (DFT) will give an audible signal when a valid user key is presented to the device: A single signal for a valid key A double signal for an invalid key Dialock Electronic Key set The set generally consists of three keys. Typically one user (depends on the required amount for the application), one Programming ADD key and one Programming DELETE key are needed to make the system work. When a key ( electronic key ) is presented to the DFANT antenna, the data stored (unique code) on the key is analyzed. Specified electric furniture locks (EFL) are triggered according to the authorization of the key. The locking units are opened or locked with the User Keys. Up to 200 User Keys can be assigned. Access authorizations are assigned or withdrawn with the Programming ADD and DELETE keys, respectively. Advantages Wear and tear free (contactless data transfer) Maintenance free (no batteries required for keys) Insensitive to external influences, such as - Magnetic fields - Mechanical vibrations - Humidity/moisture - Dust User Keys can be reprogrammed at least 100,000 times Forgery-proof coding (unique ID on each key) Electric Furniture Lock (EFL) The electric furniture lock is an electromechanical catch especially adjusted to fit the Dialock Furniture Locking System. Distribution Block The electric furniture locks (EFL) are triggered by the Dialock Furniture Terminal (DFT) via a connection to a distribution block. Dialock Furniture Locking System allows implementing solutions with electric furniture locks (EFL) either keyed alike or keyed differently. For the keyed alike solution, a maximum of 6 locks can be connected via the distribution block. This solution can be extended to a maximum of 11 locks with an additional distribution block. Output Extender (OE) For the solution with keyed differently application, the output extender OE is used. A maximum of 8 locks can be connected to the output extender. Each lock can then be assigned locking authorization to individual keys or groups of keys. Three solutions for individual areas of application The Dialock furniture locking system offers three solutions: Maximum 11 keyed alike locks using the distribution blocks and EFL Maximum 8 locks with a keyed differently application using the output extender and EFL Maximum 11 keyed alike locks using the distribution blocks and EFL AND maximum 8 locks with a keyed differently application using the output extender and EFL For all three solutions, you can choose between two different locking types: Toggle Lock function (opened/ locked with presentation of valid key) If an authorized User Key is presented to the (DFT), the EFL lock is triggered and opened. It stays opened until the User Key is presented to the (DFT) again, when the lock(s) close. Cycle Lock function (opened with presentation of valid key, relocks automatically) If an authorized User Key is presented to the (DFT), the EFL lock is triggered and opened for 3 seconds. With this time span, the locking unit (door or drawer) can be opened. After the 3 seconds have passed, the EFL locks again automatically. The time span can be adjusted between 1 and 25 seconds by means of the Configuration Transponder, OPEN TIME #74. 566

Applications 4 3 4 2 1 6 5 5 5 1. Power Supply 2. Dialock Furniture Terminal DFT 3. External Antenna DFANT 4. Distribution Block 5. EFL Lock 6. 1-2 Distribution Block 5 5 5 4 Kiosks Desks Credenzas 3 3 Cabinet doors 1 Store fixtures 2 2 Output Antenna 5 5 4 4 Output Antenna Power in Extender 1. Dialock Furniture Terminal DFT 4. Power Supply 2. External Antenna DFANT 5. EFL Lock 3. Distribution Block 1 Power in Extender 1. Dialock Furniture Terminal DFT 4. Distribution Block 2. External Antenna DFANT 5. EFL Lock 3. Power Supply 3 Drawers Jewelry cases Teller doors 567

Dialock Furniture Terminal DFT Internal Antenna Application Up to 200 keys can be authorized at a single terminal Indication of lock state through LEDs (red/green) and audible beep Configurable locking state Cycle Operation: Can be configured for 1-25 seconds with optional configuration key stick (Pre-set default time: 3 seconds) Toggle Operation: Present key to open, re-present key to lock Antenna Areas of application: For use with Dialock simple programming only For use with Dialock SpeedKey and TI-RFid Transponders only For use with Furniture Locking Systems (FLS) Suitable for interior use 50 (2") Power output LED 100 (4") Power input Extender 25 (1") Function: If an authorized electronic key is presented to the unit, all locks are activated simultaneously. Maximum 11 electric locks. Optional Output Extender: If an authorized electronic key is presented to the unit, independent control of up to 8 electric locks is possible. Optional LED interface: (customer supplied) Technical Data: Voltage Supply: 12-17VDC 11-14VAC Continuous Current: 200mA Output Extender: 50mA each Switching Voltage Rating: 14V Peak Current: 550mA Temperature Range: 0 to +60º C (Inside only) (+ to +140º F) Control Module, requires antenna (sold separately) Material: plastic light grey cycle operation 237.56.110 toggle operation 237.56.150 (includes mounting tabs and 1 metre (39 ) secondary extension cord) Control Module, with internal antenna Material: plastic light grey cycle operation 237.56.120 toggle operation 237.56.160 (includes mounting tabs and 1 metre (39 ) secondary extension cord) 12 (1/2") 3 (1/8") 47 (1 7/8") External mounting 12 (1/2") 44 (1 3/4") 6 (1/4") Internal mounting Configuration Key Stick, open time 910.54.86X.74 44 (1 3/4") 47 (1 7/8") Antenna, 1 m length Material: plastic dark grey 237.56.130 (1 metre (39 ) length) Sold Separately: SpeedKey page 577 Key Sticks page 576 Simple Programming Tools TI-RFid page 577 Output Extender Open Collector page 575 Electric Locks pages 569-570 Antenna Cable 568 9 (3/8")

Furniture Locking Systems Electric Furniture Locks EFL1 is an electro-mechanical bolt lock with slam function, suitable for controlling access to doors and drawers in furniture and office equipment. The device stays unlocked as long as power is supplied to it, and is locked when it is not powered. EFL1 can be controlled by a switch or it can be integrated into a Dialock access control system. #6 Material: Lock and bolt plate: zinc, nickel-plated Bolt: nylon, grey Cable length 1 m (39 3/5 ) 237.56.000 3 m (118 1/8 ) 237.56.002 5 m (196 7/8 ) 237.56.004 17 (21/") Specifications Voltage required: 12V DC ± 10% (not polarity sensitive) Current Consumption: 50 ma Duty cycle rating: Continuous duty (no time limit) Heat generated: 0.6 Watt Environmental range: 40 F to 120 F 20%~90% RH Tensile load limit: - Nylon bolt: 90 kg. Per DIN 68 852 - Metal bolt: 130 kg. Per DIN 68 852 Mounting: Via 2 screws. Drilling jig available Connections: Via 1 meter cable and AMP plug kit Minimum door width: 240 mm (9.5 ) on inset doors Material: Lock and bolt plate: zinc, nickel-plated Bolt: zinc, nickel-plated Cable length 1 m (39 3/5 ) 237.56.020 3 m (118 1/8 ) 237.56.022 5 m (196 7/8 ) 237.56.024 21.5 (27/") 21.5 (27/") 569 1.7 (1/16") Ø8 (Ø5/16") 5.5 (7/") 27 (1 1/16") Bolt Inlay doors 12.7 (1/2") 15 (19/") Overlay doors 20 (25/") 42 (1 21/") 16 (5/8") 16 (5/8") 4 (5/") Ø4 (Ø5/") Ø12 (Ø15/") Bolt Plate 64 (2 1/2") 20 (25/") ø4 (Ø5/) (1 1/4") 20 (25/") Ø15 (Ø19/") 64 (2 1/2") 75 (3") Lock Body 16 (5/8") (1 1/4") Drawer mounting 13 (1/2") 38 (1 1/2") AMP Plug Drilling Jig for EFL1 Lock Provides easy alignment of the locking bolt to the lock case. Material: aluminum 237.56.990 Drawer box 21.5 (27/") 37.5 (1 15/") 15 (19/") Min. 38 mm (1 1/2") Raised flat head wood screws pages 309 310

Furniture Locking Systems Electric Furniture Locks EFL6 Electric Furniture Lock Areas of application: For use with all electric and Dialock control devices Suitable for interior use For installation on furniture and cabinets Suitable for hinged or sliding doors and drawers Slam function Application examples: Cabinet doors Cabinet drawers Jewelry cases Teller doors Beverage cases Specifications: Voltage / Current consumption: 12VDC / 187mA 24VDC / 88mA Duty cycle rating: Continuous Duty Heat generated: 2.2 Watt (max.) Temperature range: 40º F - 120º F Tensile load limit: 90 kg. (200 lb.) Mounting: 2 screws Connections: 2 wires, 12 long Minimum door width: 240 mm (9.5 ) Locking function Field changeable Fail safe 1 3/16" Fail secure 17/" 1 3/16" 2 7/8" 2 3/16" 1 9/16" 27/" 1 7/8" 9/16" 1 9/16" 23/" 1 1/4" Material: Lock body: steel Cover plate: steel, matt finish Lock bolt: steel, galvanized black 912.02.034 (includes lock body, lock bolt, male amp connection, mounting hardware and instructions) 3" 7/16" Note: This lock must be wired to a controllable power source prior to installation of the strike plate. Otherwise, locking of the door may result. 3/4" 5/8" 570

EFLS Electric Furniture Locking System Switches Technical data Temperature range: -25º C 85º C Rated voltage: 12v Rated current: 6A See pages 569-570 for optional locks If more than one lock is to be wired to a switch, use optional blocks, see page 572 Note: switches are designed to be used on secondary power side The electric switch kits can be used to control other low voltage devices, such as the Häfele lighting system Switch Kit Toggle This kit provides all the parts required to control and to connect a Power Supply to an EFL Lock. The switch turns on or off the current to one lock, or to a group of locks. If more than one lock is to be wired to the switch, use distribution blocks. See page 572. Please note: This switch is designed to be used on secondary power side. Escutcheon Requires 7/8" diameter hole for mounting Wiring harness Male plug connects to Power Supply Length black 1000 mm (39 3 8") 823.78.318 2000 mm (78 3 4") 823.78.7 Switch Adhesive on backside Female plug connects to Distribution block For consistency in customized wiring: Standard Polarity for various color codes of wire. +Voltage White White Blue Red 571 Requires 21/" diameter hole for mounting Common or -Voltage Black Brown Brown Black Male plug connects to Power Supply Female cap connects to distribution block or EFL1 lock Keyed Electric Switch Kit Removable Cylinder Module System This kit provides all the parts required to control and to connect the Power Supply to the EFL Lock. The key switch turns on or off the power to one lock, or to a group of locks. Please order snap-in lock cores and keys separately. Material: Lock bracket: steel Cylinder housing: zinc, die-cast Cable Length black/unfinished 1000 mm (39 3 8") 237.56.010 See page 513 for snap-in lock core (up to 500 key changes) for keyed switch kit Insert, push Insert, until push they until snap they snap togehter together

Furniture Locking Systems Accessories Extension cables and distribution blocks are provided with a female AMP cap on one end, and a male AMP plug on the other. Technical data Temperature range: -25º C 85º C Rated voltage: 12v Rated current: 6A Suggested Wiring Assembly Female AMP caps are typically located on the power source side. Male AMP plugs are typically located on the load side. Distribution Block 1:2 The distribution block acts as a splitter, allowing 2 output devices to be connected to one input device. It has one male plug wired to 2 female caps, which allows up to 2 EFL 1 Locks to be connected to 1 output. Additional connectors can be made allowing other locks to be added. This process can be repeated as long as the current ratings for the system are not exceeded. Data Cables The 4-conductor data cable is used for the transfer of information from a controller in a dialock multi-output terminal to the corresponding output extender, or between extenders. Material: plastic blue 823.28.390 Extension Cables The extension cables are used between components on the secondary side (low-voltage side) of the Power Supply. 5 and 10 metre extension cables are only for use with furniture locking systems. Length black 500 mm (19 5 8 ) 910.51.090 1000 mm (39 3 8 ) 910.51.091 2000 mm (78 3 4 ) 910.51.092 3000 mm (118 ) 910.51.093 Distribution Block 1:6 The distribution block acts as a splitter. It has one male plug wired to 6 female caps, which allows up to 6 locks to be connected to one output. For additional locks, a 2nd block can be plugged into one of the caps of the first block (adding 5 locks). This process can be repeated as long as the current ratings system, the power supply, and control device (switch) are not exceeded. Length black 1 m (39 3 8 ) 823.28.318 2 m (78 3 4 ) 823.28.7 5 m (196 3 4 ) 823.28.350 10 m (393 3 4 ) 823.28.360 For consistency in customized wiring: Standard Polarity for various color codes of wire. +Voltage White White Blue Red Common or -Voltage Black Brown Brown Black Material: plastic black 823.24.418 Power Cord This power cord is required to supply DC voltage to the controller when using power supplies 917.93.004, and 917.93.005. Length: 500 mm (19 5/8 ) Material: plastic black 823.27.300 Packing: 100 pcs. 572

Dialock Wall Terminal Dialock Wall Terminals act as intelligent switches in Access Control Systems. Wall Terminals contain 1 or 4 relays which act together to control a lock or group of locks. When an authorized key is presented, power is sent to electric devices, such as electric strikes, gates, electric furniture locks. Wall Terminal 2000 TI-RFid Reader Transmitter and receiver for data exchange with Dialock key Transmits and receives through all non-metal materials Infrared interface for communication with portable data transfer device Illuminated diodes red/green for optical indication of programming action and locking status Connection between reader & controller RS485 (not included) RS485 cabling; 4-conductor CAT5E Supplied with screw clamps & box frame For exterior & interior use Simple Programming Unique code of key is learned by the Dialock Terminal A green programming key is presented, followed by user keys to be learned A red programming key is presented, followed by a user key to be deleted All learned keys can be deleted Controller Available with 1 or 4 relays for control of connected devices Inputs for entrance signals Serial interface (RS2) for optional connection to On-line Set or PC for initial configuration Door Lock 12V DC Reader DCBA Max. 200 m 650 ft. NO NC COM Relay CDB A Reader External Alarm Switch (if required) Power Input Controller Online RxD TxD GND 80 (3 9/64") To 12V DC Power Supply Unit Max. 200 m 650 ft. Exit Switch (if required) Online Cable 3 x 2 x 0.8mm 80 (3 9/64") 80 (3 9/64") 60 52 42 Reader mounting Ø 64 (Ø 2 33/64") Ø 64 (Ø 2 33/64") 573 38 (1 1/2") 42 11 (7/16") 86 (3 3/8") 105 (4 1/8") 86 (3 3/8") Terminals must be installed by a qualified electrician, in compliance with all governing codes. 58 (2 9/") 105 (4 1/8") 46 (1 13/16") 86 (3 3/8") 60 Sold separately: For DIN rail mount for Controller 917.93.006, see page 574. For Reader mounting, see 917.91.012 on page 574. Customer supplied: Reader cable RS485, CAT5E. For TI-RFid Simple Programming tools, see page 577. Complete Programming* Windows based modules for Personnel, Hotel and Clinic applications. Dialock programming software and hardware not included in this catalogue. Material: plastic Number of relays grey 1 917.01.101 4 917.01.104 Technical Data Voltage Supply Continuous current intake Peak current use 8-36V/DC direct current < 150mA 450mA Number of relays 1 or 4 Contact load relay Data retention during power cut bias-reducing potential max. 60V/DC, 125V/AC Current on contact: max. 2A Contact rating: max 30W / 60 VA Continuous current: max. 1A 10 years Protection Class For exterior use Reader module IP 65 Controller IP 20 Temperature range Reader -20º C 80º C (-4º 176º F) Controller 0º C 60º C (º 140º F) Relative humidity 0 to 95% (Not condensating)

Dialock Wall Terminal Wall Terminal 2000 - Accessories Ø 70 (2 3/4") 46 9 52 (3/8") (2 1/16") Reader Socket, flush-mount For flush-mounting Reader to wall Material: plastic orange 917.91.012 Ø 70 (2 3/4") 42 (1 11/16") Reader Socket, surface-mount For surface-mounting Reader to wall Material: plastic black 917.91.011 DIN rail mount plate For flush-mounting Controller to wall or enclosure 500 mm (19 11/16 ) x 35 mm (1 3/8 ) x 8 mm (5/16 ) zinc-plated 917.93.006 End Clamp For securing Controller to DIN rail mount 49 mm (1 15/16 ) x 35 mm (1 3/8 ) x 10 mm (3/8 ) Material: plastic; steel base and screw black 917.93.007 574

Dialock Wall Terminal Multi-Output Terminals control outputs in groups of eight (up to 128 outputs). Each output can control power to one, or a group of locks. Simple Programming Unique code of key is learned by the Dialock Terminal A green programming key is presented, followed by user keys to be learned A red programming key is presented, followed by a user key to be deleted All learned keys can be deleted. For TI-RFid Simple Programming tools, see page 577 Output Extenders are available in two switch functions options: Open Collector: when an authorized key is presented, power is provided at assigned amp cap outlet. Relay: when an authorized key is presented, an internal relay opens or closes the contact connected to assigned amp cap. Complete Programming* Windows based modules for Personnel, Hotel and Clinic applications. Dialock programming software and hardware not included in this catalogue. *Contact Dialock dept. for details. Multi-Output Terminal TI-RFid Reader Transmitter and receiver for data exchange with dialock key Infrared interface for communication with portable data transfer device Illuminated diodes red/green for visual indication of programming action and locking status 2.5 m (98") flat band cable and plug for connection to controller Optional spacer plate for surface mounting Decorative foil face Locks Areas of application For use with all Dialock solutions Consists of: Reader, Controller and Output Extender Operates in Simple or Complete Programming Options For use in DFLS Dialock Furniture Locking Systems Output Extender with 8 Amp Caps Select from open collector or relay Additional extenders can be added for a maximum total of 8 units or 128 sockets Controller Real time clock - utilized in Complete Programming solutions Serial interface (RS2) for connection to laptop for programming Data port for connection to output extender(s) Connection for flat band cable from reader 94 (3 11/16") 64 (2 1/2") 100 (3 15/16") 10 (3/8") 39 (1 17/") 12 (1/2") 100 (3 15/16") Ø58 (Ø2 9/") 57 (2 1/4") 130 (5 1/8") 115 (4 17/") 79 (3 1/8") 90 (3 17/") Terminals must be installed by a qualified electrician, in compliance with all governing codes. 575 64 (2 1/2") 274 (10 13/16") 30 (1 3/16") 65 (2 9/16") Material: Reader/Controller; plastic, grey Output Extender; plastic, dark grey 50 (1 31/") Open Collector Relays Multi-Output Terminals with one output extender 910.51.071 910.51.070 Additional Output Extenders (optional) 910.51.081 910.51.080 Technical Data Controller Output Extender Output Extender Open collector Relay Power Supply 10 12V/DC 10 12V/DC 10 12V/DC Continuous current use 200mA 30mA 30mA Output Voltage 12 V/DC Current use per EFL1 50mA Current per relay 50mA Contact Load relay Switching Voltage 50 V Switch current rating 500mA

Dialock Keys TI-RFid Features Contactless data transmission No batteries required Insensitive to: Magnetism Mechanical vibrations Humidity/moisture Dust Reusable Forgery proof 4.3 billion unique codes Technical data Temperature Range: 13ºF to +185ºF Data Storage - > 10 years 10 3/8 8 5/16 67 2 9/16 Key Stick TI-RFid Features For use with all Dialock TI-RFid programming options Read/Write transponder Length: 67 mm (2 9/16 ) Material: plastic black 917.04.000 yellow 917.04.003 blue 917.04.004 grey 917.04.005 orange 917.04.006 Packing: 50 pcs. Key Clip TI-RFid Features For use with all Dialock TI-RFid programming options Read/Write transponder 40 mm (1 1/2 ) W x 70 mm (2 3/4 ) L x 10 mm (3/8 ) D Material: plastic dark grey 910.54.810 light grey 910.54.817 Packing: 20 pcs. Key Wristband TI-RFid Material: Key: plastic, black Wristband: nylon, coloured with velcro closure 295 mm (11 1/2 ) x 19 mm (3/4 ) red 910.54.720 yellow 910.54.721 green 910.54.722 blue 910.54.723 black 910.54.724 576

Dialock Keys Features Contactless data transmission No batteries required Insensitive to: Magnetism Mechanical vibrations Humidity/moisture Dust Reusable Forgery proof - 4.3 billion unique codes Technical data Temperature Range: 13ºF 140ºF Data Storage - > 10 years Detailed simple programming instructions available upon request SpeedKey TI-RFid with key ring Length: 38 mm (1 1/2 ) Key ring: 20 mm (3/4 ) Diameter: 11 mm (7/16 ) Material: plastic black 917.04.043 Features For use only with Dialock TI-RFid Simple Programming solutions. Contains a secure read/only digital code. Simple Programming Tools TI-RFid 10 3/8 8 5/16 67 2 9/16 Programming Key Stick Length: 67 mm (2 9/16 ) Material: plastic Packing green - addition 917.04.012 50 pcs. red - deletion 917.04.021 1 pc. Simple Programming Overview A programming addition (Green) key stick is used to add the unique digital code of Dialock keys to the authorized list in a Dialock terminal. A programming deletion (Red) key stick is used to delete the unique digital code of a Dialock key from the authorized list in a dialock terminal. All authorized keys can be deleted. Programming tools must be purchased separately. The programming tools are introduced when a terminal is first powered. This allows the user to decide how many programming sets are practical for an application. 577

Dialock Key Accessories Key Tag Size: 22 mm (7/8 ) H x 55 mm (2 3/16 ) L Material: plastic; Hook: steel red 231.66.207 blue 231.66.216 black 231.66.234 white 231.66.289 Packing: 100 pcs. Key Ring Size: Ø 20 mm (3/4 ) nickel-plated 231.66.001 Packing: 100 pcs. Key Retractor Size: Ø 43 mm (1 11/16 ) x 12 mm (7/16 ) Material: chrome black 917.94.060 578

Dialock LockerLock Tag-it Programming options: Simple Programming features default setting, see page 577 Wellness Function user selects any one open cabinet or locker Complete Programming* Windows based modules for Personnel, Hotel and Clinic applications. * Dialock programming software and hardware not included in this catalog. *Contact Dialock dept. for details. New Item Technical Data Can be mounted on left hand or right hand door Memorizes up to 200 user keys Memorizes last 150 key uses (Complete Programming feature only) Requires (4) 1.5V/DC AA Premium Batteries Replacement after 10,000 cycles Under low power, locking is not possible Batteries accessible only with special tool Includes locker label without number Inset Installation 9 (11/") (1 1/4") 10 (3/8") 4 (5/") 8 (5/16") 17 (21/") 579 Ø22 (Ø 7/8") 120 (4 11/16") 30 (1 3/16") 64 (2 1/2") Overlay Installation 9 (11/") 22 (7/8") 72 (2 13/16") 12 (1/2") 34 (1 5/16") U 110 (4 5/16") 17 (21/") Ø22 (Ø7/8") 4 (5/") 8 (5/16") 17 (21/") Ø22 (Ø 7/8") 4 (5/") 33 (1 5/16") 70 (2 3/4") 9 (11/") 20 (13/16") For door thickness: 13 19 mm (1/2 3/4 ) Minimum cabinet width: 140 mm (5 1/2 ) 37 (1 7/16") LockerLock Set with 2 Screw Caps For use on locker or casework doors. Transmitter and receiver for exchange with Dialock key. Red/Green LED for visual indication of programming progress and key authorization (on interior box) Catch has 2 states: Open with push button extended Locked with push button retracted To lock and unlock - press the push button with an authorized key Optional Wellness Function Free choice of open lockers Any key can lock then open any locker Emergency Master Key Requires Info Terminal Mounts to inside of door with (4) 4 mm countersunk screws Utilizes Tag-it technology For use with Dialock Tag-it keys For lockerlock accessories, see page 104. #8 Material: plastic grey 231.90.010 Locker/Cabinet Label Trim and label locks push button : silver without numbers 231.81.100 with numbers* 231.81.00X *Special order specify 4 digit number range Flat head screws pages 302 304

Dialock Info Terminal TI-RFid Wellness Function: LockerLocks can be configured in: Simple programming, see page 577. Complete Programming* Windows based modules for Personnel, Hotel and Clinic applications. Dialock programming software and hardware not included in this catalogue. *Contact Dialock dept. for details. Wellness + Simple Wellness + Personnel Wellness function allows a user to lock any available open LockerLock. A user key may lock only one unit. When the user unlocks the LockerLock, the unit is available for any user and the user key is unblocked and usable at any open Locker Lock. If Wellness is used for day use management of the locks, emergency keys are programmed using either Simple or Complete programming. Areas of application Required only for the Wellness function of LockerLock Utilizes TI-RFid technology 180 (7 1/16 ) Features Transmitter and receiver module for data exchange with electronic keys 2 function buttons, LCD (4 lines, 16 characters each) for menu-driven data input/communication in maintenance mode Infrared interface for communication with handheld programming devices. Technical data Power Supply Direct voltage 10 12V/DC Alternating voltage 8 9 V Continuous current input 200mA Peak current input 400mA Safety class IP65 Temperature range 0ºC 60ºC ( F 140 F) Relative humidity (non-condensing) 0 95% For power cord, see 823.27.300 on page 572. 130 (5 1/8 ) 110 (4 5/16 ) Supplied with: Cover gasket 4 Rubber bumpers Wall mounting plate Screws Functions Reading the number of the locker for which the electronic key is authorized Data input in maintenance mode via display and function keys Unblocking keys if an emergency key was used to open a LockerLock Language selection: English, Spanish, French, German, Italian Material: plastic white 910.51.751 Configuration key sticks Length: 67 mm (2 9/16 ) Material: plastic teal Wellness + Simple 917.04.033 Wellness + Personnel 917.04.0 Battery change 910.54.86X.7D 10 3/8 8 5/16 67 2 9/16 580

Dialock LockerLock Accessories Strike plate, screw-mounted 13 (1/2") 0.5 (1/64") nickel-plated 239.05.704 Packing: 100 pcs. 60 (2 3/8") 33 (1 9/") 6 (7/") 3 (1/8") #6 Strike plate, angled Pan Head #6 42 (1 21/") 28 (1 7/64") 26 (1") 11 (7/16") Battery Cover Removal Tool Battery cover is removed only with this tool Prevents theft and tampering 1.5 (1/16") nickel-plated 239.47.604 Packing: 100 pcs. Operating Instructions Label Place near lock push button. 116 (4 9/16") 42 (1 21/") 45 (1 3/4") Material: plastic dark grey 231.80.100 Batteries, Alkaline AA, 1.5 V Packing: 4 pcs. 581 910.54.980 Size: 65 (2 9 16 ) W x 68 (2 11 16 ) H silver 231.81.200 transparent 231.81.300 Packing: 10 labels Flat head screws pages 302 304 Pan head screws pages 304 305

StealthLock Battery Powered RF Cabinet Lock StealthLock electrically controls cabinet doors and drawers. It operates in passage or cycle modes, and is released with an RF controlled key pad transmitter. Features: One key pad transmitter can activate an unlimited number of locks within a 4.5 m (15 ft.) range Lock powered by 4 AAA batteries (not included) Low battery indicator on key pad transmitter and lock Meets ANSI/BIFMA 50 lbf. pull strength specifications Slim design mounts in 1/2 drawer suspension clearance For left or right hand operation Toggle lock or timed unlock delay Areas of Application: For interior use For installation in wood, laminate or plastic cabinets and drawers Technical Data: Tensile load limit: 445 N. (100 lbf.) Environmental Operating temperature: 10º to 49º C (50º to 120º F) Humidity (operating): 95% Electrical Supply voltage: 6 VDC (4 - AAA batteries) Connections: Battery pack, self-contained Battery Life: 4000 lock cycles Standards Compliance FCC Solutions Available Standard: For most general office or residential applications. Dedicated: Factory programmed. For projects; Ideal for assigned lockers and fitness lockers. Modes Available Both Solutions Self-Lock Mode (Cycle) Passage/Manual Lock Mode (toggle) Single Use Mode (day use) 9 (11/ ) 28 (1 1/8 ) 172 (6 3/4 ) 11 (7/16 ) (1 1/4 ) 64 (2 1/2 ) Door Strike Plate Receiver Latch Cabinet 86 (3 3/8 ) 8 (5/16 ) Typical overlay door 3/4" Key Pad Transmitter 38 (1 1/2 ) 109 (4 5/16 ) 3/4" Door 45 (1 7/8 ) 10 (3/8 ) StealthLock Battery Powered RF Cabinet Lock Set Material: Receiver Latch and Key Pad: plastic Door Strike Plate: steel Item No. black 237.56.350 Packing: 1 set (includes installation tool, mounting screws and instructions) Key Pad Mounting Plate Material: aluminum Item No. grey 237.56.994 Note: Powered solution and emergency power available upon request. 581A

StealthLock Accessories Battery Powered RF Cabinet Lock 9 (11/ ) 28 (1 1/8 ) (1 1/4 ) Door Strike Plate Additional Door Strike Plate for StealthLock Color Item No. black 237.56.988 (includes mounting screws) Key Pad Transmitter for StealthLock Material: plastic; Color: black Version Item No. *standard 237.56.170 **dedicated 237.56.171 (includes CR20 coin battery) Additional Installation Tool for StealthLock Material: plastic Color Item No. red 237.56.992 StealthLock Battery Powered RF Cabinet Lock Material: plastic; Color: black Version Item No. *standard 237.56.351 **dedicated 237.56.354 (includes mounting screws) 581B StealthLock Battery Powered RF Cabinet Lock with Door Strike Plate Material: Receiver Latch: plastic Door Strike Plate: steel; Color: black Version Item No. *standard 237.56.352 (includes mounting screws)