Table of Contents Part Number Index Parts Manual 3S-3000 & 3S-3000F 30' 3-Section Folding Drill 1996+ Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! 15485 Cover illustration may show optional equipment not supplied with standard unit. Copyright 2018 Printed 06/06/18 195-110P
Table of Contents Table of Contents Part Number Index Section 1: Introduction...6 Using This Manual...6 Manual Replacement Information...6 Manual Revisions...6 Touch-up Paint...6 Hardware Legend...7 Replacement Hardware...7 Serial Numbers...7 Part Number Service Coding...7 Tongue And Mainframe...8 Hitch To Tongue...8 Transport Hook To Tongue...10 Mainframe To Tongue...12 Transport Axle...14 Transport Axle To Mainframe...14 Transport Tires & Hub...16 Tool Bars...18 Toolbar To Mainframe...18 Toolbar Pivots To Toolbars (S/N S1194-)...20 Toolbar Pivots To Box Frames...22 Box and Box Frames...24 Center Box And Center Frame To Mainframe...24 Center Box And Center Frame To Mainframe Fertilizer...26 Wing Box To Wing Frame...28 Wing Box To Wing Frame Fertilizer...30 Lid To Box...32 Lid To Box Fertilizer...34 Box Divider Fertilizer...36 Seed/Fertilizer Flap (195-177S)...38 Spill Flap Fertilizer (195-176S)...40 Fertilizer Tray To Box...42 Fertilizer Tray...44 Seed Level Indicator...46 Lights (S/N S2966-)...48 Lights (S/N S2967 - S3495)...50 Lights (S/N S3496+)...52 Weight Bracket (S/N S1869-)...54 Weight Bracket (S/N S1870+)...56 Point Row Control Box With Cables...58 Walkboard, Step And Parking Stand To Box Frame (S/N S2030-)...60 Walkboard, Step And Parking Stand To Box Frame (S/N S2031+)...62 Right Hand And Left Hand Subframes To Box Frames...64 Center Subframe To Box Frame...66 Feeder Cup Channels...68 Seed Rate Adjustment Handle...68 6" Feeder Cup Spacing...70 7 1/2" Feeder Cup Spacing...72 10" Feeder Cup Spacing...74 Vansco Shaft Monitor (Option)...76 Loup Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)...78 Calibration Tray and Scale...80 Gauge Wheels...82 Dual Gauge Wheel (S/N S3199-)...82 Dual Gauge Wheel (S/N S3200+)...86 Single Gauge Wheel...88 Drives...91 Right Hand Drive (S/N S1021-)...92 Right Hand Drive (S/N S1022 - S/N S1562)...94 Right Hand Drive (S/N S1563+)...96 Right Hand Fertilizer (S/N S1562-)...98 Right Hand Fertilizer (S/N S1563+)...100 Right Hand Drive Fertilizer (Continued)...102 Right Hand Drive Point Row (Option) (S/N S1562-)...104 Right Hand Drive Point Row (Option) (S/N S1563+)...106 Center Drive...108 Center Drive (Continued) (S/N S1021-)...110 Center Drive (Continued) (S/N S1022 - S/N S1562)...112 Center Drive (Continued) (S/N S1563+)...114 Center Drive Fertilizer (S/N S1562-)...116 Center Drive Fertilizer (S/N S1563+)...118 Center Drive Point Row (Option) (S/N S1562-)...120 Center Drive Point Row (Option) (S/N S1563+)...122 Left Hand Drive (S/N S1562-)...124 Left Hand Drive (S/N S1563+)...126 Left Hand Drive Fertilizer (S/N S1562-)...128 Left Hand Drive Fertilizer (S/N S1563+)...130 Fertilizer Drive Subassy (195-184S)...132 Clutch Linkage...134 Jaw Clutch S/N 51021-...136 Jaw Clutch S/N 51022+ (Includes Fertilizer Drills)...138 Right Hand Wing Clutch Fertilizer (195-186K)...140 Left Hand Wing Clutch Fertilizer (195-187K)...142 Openers...144 00 Series Long Arm Opener...144 00 Series Short Arm Opener...146 Fertilizer Hose...148 5" & 6" Seed-Lok (Option) (122-193K & 122-266K)...150 Press Wheels...152 1" x 12" Double "V" Press Wheel...152 2" x 13" Single Press Wheel...154 3" x 13" Single Press Wheel...156 3" x 14" Peaked Single Press Wheel...158 4" x 12" Double Ribbed Single Press Wheel...160 Hydraulics...162 Fold Hydraulics...162 Copyright 2018 All rights reserved Printed 06/06/18 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 195-110P - 2-06/06/18
Table of Contents Part Number Index Table of Contents (continued) Transport Axle And Transport Hook Lift Hydraulics (S/N S1283-)...164 Transport Axle And Transport Hook Lift Hydraulics (S/N S1283+)...166 Opener Down Pressure Hydraulics (Closed Center) (S/N S1699-)...168 Opener Down Pressure Hydraulics (Closed Center) (S/N S1700+)...170 Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1699-)...172 Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1700+)...174 Opener Down Pressure Hydraulics (Open Center) (S/N S1699-)...176 Opener Down Pressure Hydraulics (Open Center) (S/N S1700+)...178 Double Selector Valve Mounting...180 Hydraulic Cylinder 2 x 8 x 12 (810-299C)...182 Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)...184 Transport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)...186 Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)...188 Toolbar Fold Midway Hydraulic Cylinder 3.5 x 20 x 5 (810-298C)...190 Transport Axle Midway Hydraulic Cylinder 3.5 x 12 x 25 (810-316C)...192 Pressure Reducing Valve (810-301C)...194 Manifold Block (810-371C) (Option)...196 Hydraulic Hose Grips...198 Decals...200 Decal Placement (S/N S3495-)...200 Decal Placement (S/N S3496+)...202 Markers...204 Flat Fold Marker...204 Marker Disc Assembly (113-563S)...208 Single Marker Hydraulics...210 Dual Markers Hydraulics...212 Midway Hydraulic Cylinder 5 x 20 x 12 (810-118C)...214 Monarch Hydraulic Cylinder 5 x 20 x 12 (810-118C)...216 Cross Hydraulic Cylinder 5 x 20 x 12 (810-118C).218 Double Selector Valve (810-274C)...220 Sequence Valve (810-197C)...222 Small Seeds...224 Small Seeds Box To Frame...224 Small Seeds Box Components...226 Small Seeds Drive...228 Part Number Index...230 06/06/18-3 - 195-110P
Table of Contents Alphabetized Table of Contents Part Number Index Selected Models 0 00 Series Long Arm Opener...144 00 Series Short Arm Opener...146 1 1" x 12" Double "V" Press Wheel...152 10" Feeder Cup Spacing...74 2 2" x 13" Single Press Wheel...154 3 3" x 13" Single Press Wheel...156 3" x 14" Peaked Single Press Wheel...158 4 4" x 12" Double Ribbed Single Press Wheel...160 5 5" & 6" Seed-Lok (Option) (122-193K & 122-266K)...150 6 6" Feeder Cup Spacing...70 7 7 1/2" Feeder Cup Spacing...72 B Box Divider Fertilizer...36 C Calibration Tray and Scale...80 Center Box And Center Frame To Mainframe...24 Center Box And Center Frame To Mainframe Fertilizer...26 Center Drive...108 Center Drive (Continued) (S/N S1021-)...110 Center Drive (Continued) (S/N S1022 - S/N S1562)...112 Center Drive (Continued) (S/N S1563+)...114 Center Drive Fertilizer (S/N S1562-)...116 Center Drive Fertilizer (S/N S1563+)...118 Center Drive Point Row (Option) (S/N S1562-)...120 Center Drive Point Row (Option) (S/N S1563+)...122 Center Subframe To Box Frame...66 Clutch Linkage...134 Cross Hydraulic Cylinder 5 x 20 x 12 (810-118C)...218 D Decal Placement (S/N S3495-)...200 Decal Placement (S/N S3496+)...202 Double Selector Valve (810-274C)...220 Double Selector Valve Mounting...180 Dual Gauge Wheel (S/N S3199-)...82 Dual Gauge Wheel (S/N S3200+)...86 Dual Markers Hydraulics...212 F Fertilizer Drive Subassy (195-184S)...132 Fertilizer Hose...148 Fertilizer Tray...44 Fertilizer Tray To Box...42 Flat Fold Marker...204 Fold Hydraulics...162 H Hitch To Tongue...8 Hydraulic Cylinder 2 x 8 x 12 (810-299C)...182 Hydraulic Hose Grips...198 J Jaw Clutch S/N 51021-...136 Jaw Clutch S/N 51022+ (Includes Fertilizer Drills)...138 L Left Hand Drive (S/N S1562-)...124 Left Hand Drive (S/N S1563+)...126 Left Hand Drive Fertilizer (S/N S1562-)...128 Left Hand Drive Fertilizer (S/N S1563+)...130 Left Hand Wing Clutch Fertilizer (195-187K)...142 Lid To Box...32 Lid To Box Fertilizer...34 Lights (S/N S2966-)...48 Lights (S/N S2967 - S3495)...50 Lights (S/N S3496+)...52 Loup Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A)...78 M Mainframe To Tongue...12 Manifold Block (810-371C) (Option)...196 Marker Disc Assembly (113-563S)...208 Midway Hydraulic Cylinder 5 x 20 x 12 (810-118C)...214 Monarch Hydraulic Cylinder 5 x 20 x 12 (810-118C).216 O Opener Down Pressure Hydraulics (Closed Center) (S/N S1699-)...168 Opener Down Pressure Hydraulics (Closed Center) (S/N S1700+)...170 Opener Down Pressure Hydraulics (Open Center) (S/N S1699-)...176 Opener Down Pressure Hydraulics (Open Center) (S/N S1700+)...178 Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1699-)...172 Opener Down Pressure Hydraulics With Point Row (Option) (S/N S1700+)...174 P Point Row Control Box With Cables...58 Pressure Reducing Valve (810-301C)...194 195-110P - 4-06/06/18
Table of Contents Part Number Index Alphabetized Table of Contents (continued) R Right Hand And Left Hand Subframes To Box Frames...64 Right Hand Drive (S/N S1021-)...92 Right Hand Drive (S/N S1022 - S/N S1562)...94 Right Hand Drive (S/N S1563+)...96 Right Hand Drive Fertilizer (Continued)...102 Right Hand Drive Point Row (Option) (S/N S1562-)...104 Right Hand Drive Point Row (Option) (S/N S1563+)...106 Right Hand Fertilizer (S/N S1562-)...98 Right Hand Fertilizer (S/N S1563+)...100 Right Hand Wing Clutch Fertilizer (195-186K)...140 Wing Box To Wing Frame...28 Wing Box To Wing Frame Fertilizer...30 S Seed Level Indicator...46 Seed Rate Adjustment Handle...68 Seed/Fertilizer Flap (195-177S)...38 Sequence Valve (810-197C)...222 Single Gauge Wheel...88 Single Marker Hydraulics...210 Small Seeds Box Components...226 Small Seeds Box To Frame...224 Small Seeds Drive...228 Spill Flap Fertilizer (195-176S)...40 T Toolbar Fold Midway Hydraulic Cylinder 3.5 x 20 x 5 (810-298C)...190 Toolbar Pivots To Box Frames...22 Toolbar Pivots To Toolbars (S/N S1194-)...20 Toolbar To Mainframe...18 Transport Axle And Transport Hook Lift Hydraulics (S/N S1283+)...166 Transport Axle And Transport Hook Lift Hydraulics (S/N S1283-)...164 Transport Axle Midway Hydraulic Cylinder 3.5 x 12 x 25 (810-316C)...192 Transport Axle To Mainframe...14 Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)...188 Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)...184 Transport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)...186 Transport Hook To Tongue...10 Transport Tires & Hub...16 V Vansco Shaft Monitor (Option)...76 W Walkboard, Step And Parking Stand To Box Frame (S/N S2030-)...60 Walkboard, Step And Parking Stand To Box Frame (S/N S2031+)...62 Weight Bracket (S/N S1869-)...54 Weight Bracket (S/N S1870+)...56 06/06/18-5 - 195-110P
Table of Contents Part Number Index 195-110P - 6-06/06/18
Table of Contents Part Number Index 06/06/18-7 - 195-110P
Hitch To Tongue Table of Contents Part Number Index 15437 195-110P - 8-06/06/18
Hitch To Tongue Table of Contents Part Number Index Tongue And Mainframe Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 24. 25. 26. 27. dwg15437 194-104H 196-207A 194-070D 802-543C 802-544C 890-183C 170-033H 803-020C 804-015C 804-017C 196-136H 807-073C 802-039C 804-030C 803-034C 170-034H 196-146D 804-009C 802-010C 113-370D 802-004C 833-492C 196-998D 804-006C 803-006C 802-159C 804-010C Image No. 30'-3S TONGUE JACK REPLACEMENT KIT SAFETY CHAIN WASHER HHCS 1 1/4-7X10 GR5 SPTHD HHCS 1 1/4-7X9 GR5 SPTHD SAFETY CHAIN 20000 LB SINGLE HITCH STRAP-LARGE NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS PLT CLEVIS HITCH WELDMENT SPRING HOSE LOOP HEAVY HHCS 1/2-13X3 GR5 WASHER LOCK 1 1/4 SPRING PLT NUT HEX 1 1/4-7 PLT SINGLE HITCH STRAP-SMALL 3-HOSE CLAMP BRACKET WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 1/4 MARKER HYD HOSE GUARD HHCS 1/4-20X3/4 GR5 7-PIN CONNECTOR HOLDER 7-PIN CONNECTOR & HOSE HOLDER WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT HHCS 5/16-18X1 GR5 WASHER FLAT 5/16 USS PLT 06/06/18-9 - 195-110P
Table of Contents Transport Hook To Tongue Part Number Index 15438 195-110P - 10-06/06/18
Table of Contents Part Number Index Tongue And Mainframe Transport Hook To Tongue Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. dwg15438 810-104C 804-016C 802-128C 185-014D 194-105H 800-001C 803-020C 804-015C 805-124C 804-082C 194-106H 805-104C 803-006C 801-068C 817-308C Image No. CYL 3.5X8X25 ROD (TIE) 1 PIN WASHER FLAT 1/2 SAE PLT HHCS 1/2-13X2 GR5 ROCKSHAFT HALF BAND CAP NOZERK TRANSPORT HOOKS WELDMENT GREASE ZERK STRAIGHT 1/4-28 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT PIN CLEVIS 1 X 3 11/16 GR5 PLT WASHER MACH 1 3/4 X 1 X 18 GA CYLINDER LOCK WELDMENT PIN COTTER 3/16 X 1 1/2 PLT NUT-HEX 1/4-20 PLT FSHCS 1/4-20X1 PLT RPBY 194-174A Refer to "Transport Hook Midway Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)", "Transport Hook Monarch Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)" & "Transport Hook Cross Hydraulic Cylinder 3.5 x 8 x 25 (810-104C)" for breakdown. 06/06/18-11 - 195-110P
Table of Contents Mainframe To Tongue Part Number Index 15439 195-110P - 12-06/06/18
Table of Contents Part Number Index Tongue And Mainframe Mainframe To Tongue Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. dwg15439 194-108H 802-615C 804-028C 804-027C 803-031C 194-134H 802-079C 804-011C 804-013C 803-014C 196-112D 804-009C 802-138C 113-370D Image No. MAINFRAME WELDMENT HHCS 1-8X2 3/4 GR. 5 WASHER FLAT 1 USS PLT WASHER LOCK SPRING 1 PLT NUT HEX 1-8 PLT VALVE MOUNT BRACKET HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT RPBY 196-146D WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X2 1/4 GR5 1/4 MARKER HYD HOSE GUARD 06/06/18-13 - 195-110P
Table of Contents Transport Axle To Mainframe Part Number Index 15440 195-110P - 14-06/06/18
Table of Contents Part Number Index Transport Axle Transport Axle To Mainframe Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. dwg15440 810-316C 803-006C 194-113H 801-068C 805-124C 804-082C 805-104C 194-110H 148-402D 804-023C 803-027C 802-212C 800-001C 817-308C 194-402D 194-401D 802-283C Image No. CYL 3.5X12X25 ROD (TIE ROD) NUT-HEX 1/4-20 PLT TRANSPORT AXLE CYL LOCK FSHCS 1/4-20X1 PLT PIN CLEVIS 1 X 3 11/16 GR5 PLT WASHER MACH 1 3/4 X 1 X 18 GA PIN COTTER 3/16 X 1 1/2 PLT TRANSPORT AXLE WELDMENT 3-BOLT PIVOT BUSH 4 1/2 ID TB WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT HHCS 3/4-10X2 1/2 GR5 GREASE ZERK STRAIGHT 1/4-28 RPBY 194-174A PLASTIC CYL LOCK BUMPER LOCK SPRING CLIP HHCS 1/4-20X1/2 GR2 Refer to "Transport Axle Midway Hydraulic Cylinder 3.5 x 12 x 25 (810-316C)" for breakdown. 06/06/18-15 - 195-110P
Table of Contents Transport Tires & Hub Part Number Index 15441 195-110P - 16-06/06/18
Table of Contents Part Number Index Transport Axle Transport Tires & Hub Ref. Part No. Part Description Comments Revision 3. 4. 5. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 23. 23. 23. 24. 25. 26. 26. dwg15441 802-104C 155-012K 155-007K 816-035C 814-031C 814-023C 814-551C 818-752C 200-001D 822-021C 822-020C 822-053C 815-094C 822-048C 816-265C 181-064D 805-016C 803-029C 815-089C 815-090C 802-399C 152-215D 802-153C 803-024C 196-274K 196-275K 196-543K 196-542K 814-210C 814-207C 814-209C 814-554C Image No. BOLT WHEEL 1/2-20X1 90-DEG TRANSPORT WHEEL & TIRE ASSY TRANSPORT WHEEL/TIRE ASY BKSN VALVE STEM TR415X.625X1 1/4 LG TIRE 11L-15SL 12 PLY TUBELESS WHEEL 15 DIA X 10 WIDE X 6 BLT WHEEL 15 DIAX10WIDEX6BLT BKSN DECAL CAUTION TIRE 52 PSI HUB GREASE CAP BEARING CONE LM-67048 BEARING CUP LM-67010 BEARING CUP #LM 501310 HUB 6 BOLT 4570# W/CUPS PAINTD BEARING CONE #LM 501349 SEAL 875 ID X 3.00 OD QDS 7/8 SPINDLE WASHER, HARDENED PIN COTTER 3/16 X 1 1/4 PLT NUT HEX SLOTTED 7/8-14 PLT SPINDLE SGL 98X100 HUB & SPINDLE 6 BOLT 4570 LB HFS 1/2-20X1 1/2 GR5 WHEEL REINFORCING RING HHCS 5/8-11X3 3/4 GR5 NUT LOCK 5/8-11 PLT RH TIRE/RIM 265/70B16.5 SKID 6 LH TIRE/RIM 265/70B16.5 SKID 6 LH TIRE/RIM265/70B16.5SKID6 BK RH TIRE/RIM265/70B16.5SKID6BKS VALVE STEM METAL TR-575 TUBLES TIRE SKID ST 265/70B16.5 NHS RIM 16.5X8.25, 6 BLT 4.63 PILT RIM16.5X8.25 6BLT 4.63PILT BKS Includes items 3 through 5 S/N S3236- S/N S3237+ S/N S3236- S/N S3237+ Includes items 9 & 10 Includes items 7 through 17 Only on outside dual gauge wheels Includes items 24 through 26 S/N S3236- Includes items 24 through 26 S/N S3236- S/N S3237+ S/N S3237+ S/N S3236- S/N S3237+ 06/06/18-17 - 195-110P
Table of Contents Toolbar To Mainframe Part Number Index 15442 195-110P - 18-06/06/18
Table of Contents Part Number Index Tool Bars Toolbar To Mainframe Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 18. 19. 20. 2 2 23. 24. 25. 26. 27. 28. 29. 30. 3 3 33. dwg15442 194-525D 803-028C 194-268D 194-270D 890-193C 194-118H 194-117H 800-436C 810-298C 805-085C 803-079C 804-035C 197-001D 802-178C 196-112D 804-009C 802-705C 113-370D 194-151H 194-150H 803-032C 802-273C 804-030C 800-211C 194-526D 194-527D 802-155C 802-252C 803-209C 804-011C 800-449C 194-577D 800-130C 804-036C 990-109R Image No. HARDENED SPACER WASHER W/SLOTS NUT NY-LOK 7/8-9 PLT TOOLBAR VERTICAL PIVOT PIN TOOLBAR SPACER WASHER STEEL BUSHING 3 1/4X3IDX3LONG TOOLBAR LH OBSO REPLBY194-151H TOOLBAR RH OBSO REPLBY194-150H ADAPT 90 SWIVEL 1/4-28M X 1/4 CYL 3.5X20X5 ROD (TIE ROD) PIN COTTER 5/16 X 2 1/2 NUT HEX SLOTTED 1 1/4-7 WASHER FLAT 1 1/4 USS PLT BOX HINGE PIVOT WASHER HHCS 7/8-9X5 1/2 GR5 HOSE CLAMP BRACKET WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X5/8 1/4 MARKER HYD HOSE GUARD 3S-3000 TOOLBAR LH 3S-3000 TOOLBAR RH NUT HEX JAM 1 1/4-7 PLT HHCS 1 1/4-7X4 1/2 GR5 WASHER LOCK 1 1/4 SPRING PLT GREASE ADAPT 1/4-28M X 1/4 TB SPLIT SPACER WASHER,INNER LOCK SPLIT SPACER WASHER,OUTER LOCK RHSNB 3/8-16X1 1/4 GR5 RHSNB 3/8-16X1 3/4 GR5 NUT FLANGE LOCK 3/8-16 PLT WASHER FLAT 3/8 USS PLT AD PUSH 1/4 TUBE 1/8 FNPT 5 OUTLET GREASE BANK GREASE ZERK STRAIGHT 1/8-27NPT WASHER FLAT 5/16 SAE PLT TUBE NYLON 1/4OD X 062WL (S/N S1194-) (S/N S1194-) W/GB Refer to page 11-19 for breakdown. W/GB Shown. (S/N S1195+) (S/N S1195+) W/GB W/GB W/GB JUL 2012+ JUL 2012+ JUL 2012+ JUL 2012+ JUL 2012+ 06/06/18-19 - 195-110P
Table of Contents Part Number Index Toolbar Pivots To Toolbars (S/N S1194-) 15443 195-110P - 20-06/06/18
Table of Contents Part Number Index Tool Bars Toolbar Pivots To Toolbars (S/N S1194-) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 10. 1 1 13. dwg15443 803-032C 802-273C 803-081C 804-062C 804-039C 890-193C 803-214C 804-025C 800-001C 194-115H 194-120H 802-544C 804-030C 804-141C Image No. NUT HEX JAM 1 1/4-7 PLT HHCS 1 1/4-7X4 1/2 GR5 NUT HEX 1 1/4-7 NYLON INSERT WASHER MACH 88 X 25 X 10GA WASHER FLAT 1 1/4 SAE PLT STEEL BUSHING 3 1/4X3IDX3LONG NUT HEX FLANGE 3/4-10 GR5 PLT WASHER FLAT 3/4 SAE PLT GREASE ZERK STRAIGHT 1/4-28 TOOLBAR PIVOT WELDMENT LH TOOLBAR PIVOT WELDMENT RH HHCS 1 1/4-7X9 GR5 SPTHD WASHER LOCK 1 1/4 SPRING PLT WASHER MACH 88 X 26 X.048 06/06/18-21 - 195-110P
Table of Contents Toolbar Pivots To Box Frames Part Number Index 15444 195-110P - 22-06/06/18
Table of Contents Part Number Index Tool Bars Toolbar Pivots To Box Frames Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. dwg15444 805-085C 803-079C 804-035C 194-270D 194-269D 197-001D Image No. PIN COTTER 5/16 X 2 1/2 NUT HEX SLOTTED 1 1/4-7 WASHER FLAT 1 1/4 USS PLT TOOLBAR SPACER WASHER TOOLBAR HORIZONTAL PIVOT PIN BOX HINGE PIVOT WASHER 06/06/18-23 - 195-110P
Table of Contents Part Number Index Center Box And Center Frame To Mainframe 15445 195-110P - 24-06/06/18
Table of Contents Part Number Index Box and Box Frames Center Box And Center Frame To Mainframe Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 17. 18. 19. 20. dwg15445 195-100D 802-387C 802-079C 804-011C 195-101D 802-203C 803-169C 803-014C 804-013C 803-020C 804-015C 802-034C 804-134C 804-037C 803-049C 802-103C 194-146H 194-101H 195-437S 195-102D 803-199C Image No. 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH HFSS 1/2-13X1 1/2 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 1/4 GR5 WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT HHCS 7/8-9X2 3/4 GR5 30'-3S CENTER BOX FRAME 30'-3S CENTER BOX FRAME 3000 SEED BOX ASSEMBLY INTERIOR ENDPANEL COVER RH NUT HEX FLANGE 5/16-18 PLT (S/N S1022+) (S/N S1021-) Rev. 2 is not interchangeable w/rev. 1 1st rev. 06/06/18-25 - 195-110P
Table of Contents Part Number Index Center Box And Center Frame To Mainframe Fertilizer 16414 195-110P - 26-06/06/18
Table of Contents Part Number Index Box and Box Frames Center Box And Center Frame To Mainframe Fertilizer Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 24. 25. dwg16414 195-100D 802-387C 802-079C 804-011C 195-101D 802-203C 803-169C 803-014C 804-013C 803-020C 804-015C 802-034C 804-134C 804-037C 803-049C 802-103C 194-146H 195-437S 195-102D 803-199C 195-205D 802-442C 195-206D 195-207D 803-177C Image No. 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH HFSS 1/2-13X1 1/2 GR5 NUT HEX FLG. LOCK 1/2-13 PLT. NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT HHCS 1/2-13X1 1/4 GR5 WASHER FLAT 7/8 USS PLT WASHER LOCK SPRING 7/8 PLT NUT HEX 7/8-9 PLT HHCS 7/8-9X2 3/4 GR5 30'-3S CENTER BOX FRAME 3000 SEED BOX ASSEMBLY INTERIOR ENDPANEL COVER RH NUT HEX FLANGE 5/16-18 PLT DIVIDER ANGLE BRACKET HFSS 5/16-18X1 1/4 DIVIDER CLIP INNER DIVIDER CLIP OUTER 803-184 FLG TP LK 5/16-18ZNYCR 06/06/18-27 - 195-110P
Table of Contents Wing Box To Wing Frame Part Number Index 15446 195-110P - 28-06/06/18
Table of Contents Part Number Index Box and Box Frames Wing Box To Wing Frame Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 14. 14. 14. 15. 16. 17. 18. 19. 20. dwg15446 803-169C 119-190D 802-203C 803-199C 195-100D 802-387C 802-079C 804-011C 195-101D 803-014C 804-013C 803-020C 804-015C 194-145H 194-102H 194-147H 194-100H 195-437S 802-034C 195-102D 196-112D 804-009C 802-010C Image No. NUT HEX FLG. LOCK 1/2-13 PLT. HANDLE HFSS 1/2-13X1 1/2 GR5 NUT HEX FLANGE 5/16-18 PLT 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT 30'-3S WING BOX FRAME RH 30'-3S WING BOX FRAME RH 30'-3S WING BOX FRAME LH 30'-3S WING BOX FRAME LH 3000 SEED BOX ASSEMBLY HHCS 1/2-13X1 1/4 GR5 INTERIOR ENDPANEL COVER RH RPBY 196-146D WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 S/N S1022+ (shown) S/N S1021- S/N S1022+ S/N S1021- Rev. 2 is not interchangeable w/rev. 1 1st rev. Rev. 2 is not interchangeable w/rev. 1 1st rev. 06/06/18-29 - 195-110P
Table of Contents Wing Box To Wing Frame Fertilizer Part Number Index 16416 195-110P - 30-06/06/18
Table of Contents Part Number Index Box and Box Frames Wing Box To Wing Frame Fertilizer Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 24. 25. dwg16416 803-169C 119-190D 802-203C 803-199C 195-100D 802-387C 802-079C 804-011C 195-101D 803-014C 804-013C 803-020C 804-015C 194-145H 194-147H 195-437S 802-034C 195-102D 196-112D 804-009C 802-010C 195-205D 802-442C 195-206D 195-207D 803-177C Image No. NUT HEX FLG. LOCK 1/2-13 PLT. HANDLE HFSS 1/2-13X1 1/2 GR5 NUT HEX FLANGE 5/16-18 PLT 3S BOX PARTITION HFS 5/16-18X3/4 GR5 HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 3/8 USS PLT INTERIOR ENDPANEL COVER LH NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT 30'-3S WING BOX FRAME RH 30'-3S WING BOX FRAME LH 3000 SEED BOX ASSEMBLY HHCS 1/2-13X1 1/4 GR5 INTERIOR ENDPANEL COVER RH RPBY 196-146D WASHER LOCK SPRING 5/16 PLT HHCS 5/16-18X1 1/4 GR5 DIVIDER ANGLE BRACKET HFSS 5/16-18X1 1/4 DIVIDER CLIP INNER DIVIDER CLIP OUTER 803-184 FLG TP LK 5/16-18ZNYCR 06/06/18-31 - 195-110P
Lid To Box Table of Contents Part Number Index 22523 195-110P - 32-06/06/18
Lid To Box Table of Contents Part Number Index Box and Box Frames Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 2 dwg22523 175-180S 803-209C 313-186D 313-176D 802-411C 802-015C 838-482C 803-011C 800-121C 890-221C 119-153D 807-106C 119-154D 804-036C 802-425C 195-125H 802-004C 817-042C 803-293C 817-516C 802-203C 248-251D Image No. 13' EW LID HINGE ASSEMBLY NUT FLANGE LOCK 3/8-16 PLT LID HINGE PIVOT LID HINGE BASE PLATE RHSNB 3/8-16X2 GR5 RHSNB 3/8-16X1 GR5 DECAL GP PLANTING COMPONENTS NUT LOCK 5/16-18 PLT BALL STUD 10MM X 5/16-18 X 1/2 12-20 X 90 LB GAS SPRING LATCH CASTING MACHINED SPRING.540 O.D.X 1 1/4 X.054W LID HANDLE WASHER FLAT 5/16 SAE PLT HHCS 5/16-18X1 1/4 NYL LID 104 SEED HHCS 1/4-20X3/4 GR5 MINI END WHEEL PRESS WHEEL NUT HEX FLNG T-LOCK 1/4-20 YLW MANUAL PAK 1'" W/ GASKET HFSS 1/2-13X1 1/2 GR5 MANUAL PAK MOUNTING PLATE Includes items 2 through 5 Includes two of item 9 06/06/18-33 - 195-110P
Table of Contents Lid To Box Fertilizer Part Number Index 16418 195-110P - 34-06/06/18
Table of Contents Part Number Index Box and Box Frames Lid To Box Fertilizer Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 20. dwg16418 313-076S 803-209C 313-186D 313-176D 802-411C 802-017C 804-011C 803-011C 800-121C 890-308C 119-153D 807-106C 119-154D 804-036C 802-425C 195-125H 803-088C 195-177S 802-375C 195-198D 195-197D Image No. LID HINGE ASSEMBLY PS25120 NUT FLANGE LOCK 3/8-16 PLT LID HINGE PIVOT LID HINGE BASE PLATE RHSNB 3/8-16X2 GR5 HHCS 3/8-16X1 GR5 WASHER FLAT 3/8 USS PLT NUT LOCK 5/16-18 PLT BALL STUD 10MM X 5/16-18 X 1/2 9 1/4-15 X 70LB GAS SPRING LATCH CASTING MACHINED SPRING.540 O.D.X 1 1/4 X.054W LID HANDLE WASHER FLAT 5/16 SAE PLT HHCS 5/16-18X1 1/4 NYL LID 104 SEED NUT HEX LOCK 1/4-20 FLG SEED/FERT FLAP SUBASSY HFSS 1/4-20X1 GR5 HINGE CLAMP STRIP ENDS HINGE CLAMP STRIP CTR Includes items 2-5 Includes two of item 9 Refer to "Seed / Fertilizer Flap (195-177S)" for breakdown. End strip Center strip 06/06/18-35 - 195-110P
Table of Contents Box Divider Fertilizer Part Number Index 34110 195-110P - 36-06/06/18
Table of Contents Part Number Index Box and Box Frames Box Divider Fertilizer Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 dwg34110 802-017C 817-322C 817-324C 803-209C 802-005C 803-007C 195-208D 195-182H 195-181H 195-183H 803-199C 195-194D 802-387C 195-193D 817-321C 195-176S 802-375C 803-088C 195-336D 802-196C 803-088C Image No. HHCS 3/8-16X1 GR5 DIVIDER INSERT 33 X 4.5 OFFSET KNOB 1/4-20 FEMALE THD NUT FLANGE LOCK 3/8-16 PLT HHCS 1/4-20X1 GR5 NUT LOCK 1/4-20 PLT RETAINER CLIP DIVIDER BOTTOM BRACKET LH DIVIDER BOTTOM BRACKET CTR DIVIDER BOTTOM BRACKET RH NUT HEX FLANGE 5/16-18 PLT DIVIDER CLIP, END MOUNTED HFS 5/16-18X3/4 GR5 TOP BAR END BRACE DIVIDER INSERT 33 X NO OFFSET SPILL FLAP SUBASSY HFSS 1/4-20X1 GR5 NUT HEX LOCK 1/4-20 FLG 3000 FERTILIZER CAP PLATE HFSS 1/4-20X5/8 GR5 NUT HEX LOCK 1/4-20 FLG 06/06/18-37 - 195-110P
Table of Contents Seed/Fertilizer Flap (195-177S) Part Number Index 16462 195-110P - 38-06/06/18
Table of Contents Part Number Index Box and Box Frames Seed/Fertilizer Flap (195-177S) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. dwg16462 195-196D 195-197D 195-198D 803-007C 802-078C 816-277C 195-177S Image No. SEED/FERTILIZER SELECT FLAP HINGE CLAMP STRIP CTR HINGE CLAMP STRIP ENDS NUT-LOCK 1/4-20 PLT HHCS 1/4-20X5/8 GR5 RUBBER BELTING HINGE SEED/FERT FLAP SUBASSY Includes items 1-6 06/06/18-39 - 195-110P
Table of Contents Spill Flap Fertilizer (195-176S) Part Number Index 16461 195-110P - 40-06/06/18
Table of Contents Part Number Index Box and Box Frames Spill Flap Fertilizer (195-176S) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. dwg16461 195-195D 195-197D 195-198D 802-078C 803-088C 816-277C 816-278C 802-375C 800-012C 195-191D 195-192D 804-007C 195-176S Image No. SPILL FLAP HINGE CLAMP STRIP CTR HINGE CLAMP STRIP ENDS HHCS 1/4-20X5/8 GR5 NUT HEX LOCK 1/4-20 FLG RUBBER BELTING HINGE RUBBER BELTING SEAL STRIP HFSS 1/4-20X1 GR5 RIVET SS 1/8 DIA DIVIDER CLAMP ANGLE TOP BAR PARTITION BRACE WASHER FLAT 1/4 SAE PLT SPILL FLAP SUBASSY Includes items 1-12 06/06/18-41 - 195-110P
Table of Contents Fertilizer Tray To Box Part Number Index 16463 195-110P - 42-06/06/18
Table of Contents Part Number Index Box and Box Frames Fertilizer Tray To Box Ref. Part No. Part Description Comments Revision 3. 4. dwg16463 195-178S 195-179S 195-180S 802-196C 803-088C 802-375C Image No. FERT TRAY ASSEMBLY 6 FERT TRAY ASSEMBLY 7 1/2 FERT TRAY ASSEMBLY 10 HFSS 1/4-20X5/8 GR5 NUT HEX LOCK 1/4-20 FLG HFSS 1/4-20X1 GR5 Refer to "Fertilizer Tray" for breakdown. Refer to "Fertilizer Tray" for breakdown. Refer to "Fertilizer Tray" for breakdown. 06/06/18-43 - 195-110P
Fertilizer Tray Table of Contents Part Number Index 16464 195-110P - 44-06/06/18
Fertilizer Tray Table of Contents Part Number Index Box and Box Frames Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 6. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 24. 25. 26. 27. 28. 29. 30. 3 dwg16464 141-084D 175-102H 191-001D 191-002D 191-018D 195-146H 195-147H 195-148H 195-199D 195-204D 800-032C 800-012C 801-009C 802-079C 802-092C 802-148C 802-252C 802-633C 803-006C 803-008C 803-014C 803-088C 804-006C 804-009C 804-013C 808-086C 816-279C 817-053C 817-323C 822-083C 890-026C 804-048C 800-030C Image No. TRAY BEARING SPACER 13' EW FERT BEARING RETAINER MF FERT.75 HEX BORE BUSHING MF FERT HEX BORE PLASTIC BUSH MF FERT STAR RETAINER SIDE PLT FERT TRAY WELDMENT 7 1/2 FERT TRAY WELDMENT 6 FERT TRAY WELDMENT 10 FERT TRAY ADAPTER PANEL SHAFT 3/4 HEX 109 PLT LATCH STRIKE RIVET SS 1/8 DIA SCREW SET 1/4-28 SH X 1/2 LG HHCS 3/8-16X1 1/4 GR5 RHSNB 5/16-18X3/4 GR5 HFSS 1/4-20X1/2 GR5 RHSNB 3/8-16X1 3/4 GR5 RHSNB 1/4-20X5/8 PLT NUT-HEX 1/4-20 PLT NUT HEX 5/16-18 PLT NUT HEX 3/8-16 PLT NUT HEX LOCK 1/4-20 FLG WASHER LOCK SPRING 1/4 PLT WASHER LOCK SPRING 5/16 PLT WASHER LOCK SPRING 3/8 PLT SPKT 40B30 X 3/4 HEXBORE W/ SS VINYL FERTILIZER DEW SHIELD 6 POINT FERT METERING WHEEL NYLON RATCHET (TREE RIVET) BRG FLG 25ID 3BOLT FELT SEAL WASHER MACH 2 1/2X1 3/4X.075 LATCH FERT TRAY DOOR 06/06/18-45 - 195-110P
Table of Contents Seed Level Indicator Part Number Index 15448 195-110P - 46-06/06/18
Table of Contents Part Number Index Box and Box Frames Seed Level Indicator Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 dwg15448 197-091D 800-101C 805-067C 890-305C 195-124H 817-202C 804-054C 803-001C 817-086C 801-045C 817-350C 197-023H 818-295C 818-392C 818-296C 801-096C 197-089D 197-096D 804-075C 803-003C 801-154C 838-237C Image No. SEED LEVEL CHAIN BRACKET RIVET POP 1/8X.265LG FLG PIN COTTER 1/8 X 3/4 CABLE 3/64 X 11 5/8 W/ EYELETS 3S SEED LEVEL ROD SEED LEVEL ARM MOUNT WASHER LOCK #10 NUT HEX 10-24 PLT SEED LEVEL BUSHING SCREW SET 1/4-28X1/4 KNL CUP SEED LEVEL INDICATOR INDICATOR OB RPLCD BY 817-350C DECAL LETTER E DECAL SEED LEVEL, NOTCHED DECAL LETTER F HFS 10-24 X 1 1/8 PLTD FOAM FLOAT FOAM FLOAT WASHER WASHER FLAT 1/4 USS PLT.00 HEX SS 1/4-20 NYLOCK SCR HEX HD SHT MET #8 X 1/2 DECAL SEED LEVEL LH Use with item 20. Use with item 10. No longer available. Order part no. 838-237C. No longer available. Order part no. 838-237C. No longer available. Order part no. 838-237C.. 2nd rev. Use existing stock; 1st rev. 06/06/18-47 - 195-110P
Table of Contents Lights (S/N S2966-) Part Number Index 15449 195-110P - 48-06/06/18
Table of Contents Part Number Index Box and Box Frames Lights (S/N S2966-) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 8. 9. 10. 1 1 dwg15449 890-312C 890-311C 801-151C 802-203C 890-430C 800-112C 800-064C 890-313C 195-112D 195-165D 803-169C 804-013C 803-014C 800-148C Image No. DUAL AG LIGHTS RH DUAL AG LIGHTS LH SCR HEX SELF TAP 1/4-20X1TYPEF HFSS 1/2-13X1 1/2 GR5 LIGHT HARNESS, 20' WISHBONE CABLE TIE.19X7.25 75D 50LB HOSE CLIP 13/16 ID AG LIGHT WIRING HARNESS-28' PLATE, AG LIGHT RH PLATE, AG LIGHT LH NUT HEX FLG. LOCK 1/2-13 PLT. WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT CABLE TIE MOUNT Shown Shown 06/06/18-49 - 195-110P
Table of Contents Lights (S/N S2967 - S3495) Part Number Index 36171 195-110P - 50-06/06/18
Table of Contents Part Number Index Box and Box Frames Lights (S/N S2967 - S3495) Ref. Part No. Part Description Comments Revision 3. 4. 5. 5. 6. 7. 8. 9. 10. 1 1 13. 14. dwg36171 833-685C 833-679C 833-697C 833-696C 195-165D 195-112D 801-081C 802-205C 803-169C 833-694C 800-148C 800-112C 800-064C 804-013C 803-014C Image No. LIGHT HARNESS 20' WISHBONE LED AG LGHT WIRING HARNESS-28' LED LIGHT, AMBER LAMP LED LIGHT, RED LAMP - LED PLATE, AG LIGHT LH PLATE, AG LIGHT RH SCREW HEX SELF TAP 1/4-20X3/4 HHCS 1-8X5 1/2 GR5 NUT HEX FLG LOCK 1/2-13 PLT LIGHT HRNSS ENHANCE MODULE LED CABLE TIE MOUNT CABLE TIE.19X7.25 75D 50LB HOSE CLIP 13/16 ID WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT Shown 06/06/18-51 - 195-110P
Table of Contents Lights (S/N S3496+) Part Number Index 68446 195-110P - 52-06/06/18
Table of Contents Part Number Index Box and Box Frames Lights (S/N S3496+) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. dwg68446 833-679C 823-432C 843-012C 833-694C 891-836C 195-563D 833-697C 802-203C 816-807C 803-169C 801-081C 195-559D 833-696C Image No. AG LGHT WIRING HARNESS-28' LED HARNESS EXT. 15' 2 PIN WP LIGHT 16' A 11' R WISHBONE LED LIGHT HRNSS ENHANCE MODULE LED ADHESIVE BACK CORD CLIP 2600 SIDE LIGHT BRKT LIGHT, AMBER LAMP LED HFSS 1/2-13X1 1/2 GR5 WASHER FLAT RUBBER 1/2 NUT HEX FLG LOCK 1/2-13 PLT SCREW HEX SELF TAP 1/4-20X3/4 3 SEC MIN TILL LIGHT BRACKET LIGHT, RED LAMP - LED 06/06/18-53 - 195-110P
Table of Contents Weight Bracket (S/N S1869-) Part Number Index 24414 195-110P - 54-06/06/18
Table of Contents Part Number Index Box and Box Frames Weight Bracket (S/N S1869-) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. dwg24414 802-055C 171-101H 171-102H 171-043D 804-019C 804-022C 803-021C 803-027C 804-023C 806-093C Image No. HHCS 5/8-11X2 GR5 WEIGHT BRACKET WELDMENT-LH WEIGHT BRACKET WELDMENT-RH WEIGHT BRACKET ADJ LEG WASHER FLAT 5/8 USS PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT U-BOLT 3/4-10 6 1/32 X 7 3/4 06/06/18-55 - 195-110P
Table of Contents Weight Bracket (S/N S1870+) Part Number Index 25317 195-110P - 56-06/06/18
Table of Contents Part Number Index Box and Box Frames Weight Bracket (S/N S1870+) Ref. Part No. Part Description Comments Revision 3. 4. 5. dwg25317 802-022C 194-058D 589-046D 804-013C 803-014C Image No. HHCS 3/8-16X1 1/2 GR5 END CAP - TUBE WING WEIGHT 3000TT/4000TT WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT 06/06/18-57 - 195-110P
Table of Contents Point Row Control Box With Cables Part Number Index 22972 195-110P - 58-06/06/18
Table of Contents Part Number Index Box and Box Frames Point Row Control Box With Cables Ref. Part No. Part Description Comments Revision 3. 4. 5. dwg22972 823-185C 823-190C 823-175C 810-408C 810-432C Image No. POINT ROW CONTROL BOX POINT ROW CABLE W/ POWER LEAD 3 SECT POINT ROW WIRE HARNESS BYPASS CARTRIDGE AND SOLENOID HYDRAULIC BYPASS VALVE 06/06/18-59 - 195-110P
Table of Contents Part Number Index Walkboard, Step And Parking Stand To Box Frame (S/N S2030-) 15450 195-110P - 60-06/06/18
Table of Contents Part Number Index Box and Box Frames Walkboard, Step And Parking Stand To Box Frame (S/N S2030-) Ref. Part No. Part Description Comments Revision 3. 4. 4. 5. 6. 7. 8. 9. dwg15450 195-114H 803-020C 804-015C 195-121D 195-122D 802-082C 194-135H 805-032C 805-197C 802-034C Image No. 30'-3S WALKBOARD NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT STEP LH STEP RH HHCS 1/2-13X1 3/4 GR5 PARKING STAND LEG PIN HAIR COTTER.148 WIRE PIN BENT SHANK LOCK 5/8 OD HHCS 1/2-13X1 1/4 GR5 Shown 06/06/18-61 - 195-110P
Table of Contents Part Number Index Walkboard, Step And Parking Stand To Box Frame (S/N S2031+) 31230 195-110P - 62-06/06/18
Table of Contents Part Number Index Box and Box Frames Walkboard, Step And Parking Stand To Box Frame (S/N S2031+) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 13. 14. 15. 16. 17. 18. 19. 20. 2 dwg31230 194-135H 195-062H 195-114H 802-034C 802-030C 803-020C 804-015C 805-032C 805-197C 802-079C 804-016C 803-209C 195-064H 195-063H 802-017C 195-340D 804-013C 803-068C 803-015C 804-014C 195-310H 195-311H Image No. PARKING STAND LEG LADDER WELDMENT 3-STEP NARROW 30'-3S WALKBOARD HHCS 1/2-13X1 1/4 GR5 RHSNB 7/16-14X1 3/4 GR5 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT PIN HAIR COTTER.148 WIRE PIN BENT SHANK LOCK 5/8 OD HHCS 3/8-16X1 1/4 GR5 WASHER FLAT 1/2 SAE PLT NUT FLANGE LOCK 3/8-16 PLT LADDER MOUNT TOP WELDMENT RH LADDER MOUNT TOP WELDMENT LH HHCS 3/8-16X1 GR5 LADDER MOUNT BOTTOM PLATE WASHER LOCK SPRING 3/8 PLT NUT HEX FLANGE 3/8-16 PLT NUT HEX 7/16-14 PLT WASHER LOCK 7/16 PLT WALKBOARD EXTENSION LH WALKBOARD EXTENSION RH Shown LH Used with Small Seeds Only RH Used with Small Seeds Only 06/06/18-63 - 195-110P
Table of Contents Part Number Index Right Hand And Left Hand Subframes To Box Frames 15451 195-110P - 64-06/06/18
Table of Contents Part Number Index Box and Box Frames Right Hand And Left Hand Subframes To Box Frames Ref. Part No. Part Description Comments Revision 3. 4. 4. 4. 4. 5. 6. 7. 8. 9. 10. 1 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 24. 25. 26. 27. 28. 29. 30. 3 3 33. 34. 35. dwg15451 803-031C 804-027C 194-129H 194-204H 194-205H 194-126H 194-127H 802-594C 803-026C 194-100D 805-156C 194-124H 805-104C 194-101D 802-441C 802-586C 805-236C 810-299C 194-123K 802-204C 800-058C 804-025C 804-023C 803-027C 194-128H 800-001C 803-020C 804-015C 120-247D 802-082C 802-095C 195-188H 194-156H 194-155H 194-516D 802-662C 803-028C 803-026C 194-515D Image No. NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT 6 1/8 EYE BOLT 3S-3000 OPENER SUBFRAME RH 3S-3000 OPENER SUBFRAME LH SUBFRAME END RIGHT SUBFRAME END LEFT HHCS 3/4-10X5 1/2 GR5 NUT LOCK 3/4-10 PLT TRUNNION CASTING MACHINED PIN ROLL 5/16 X 1 LG SUBFRAME PIVOT ARM OUTSIDE PIN COTTER 3/16 X 1 1/2 PLT PIVOT ARM WASHER HHCS 1 1/8-7X2 1/2 GR5 HHCS 1 1/8-7X2 GR5 FTHD PIN CLEVIS 1 X 3 7/8 USBLE PLT CYL 2X8X12 ROD (TIE ROD) 3S BEARING ASSEMBLY HHCS 3/4-10X3 3/4 GR5 GREASE ZERK 1/4-28 X 45-DEG WASHER FLAT 3/4 SAE PLT WASHER LOCK SPRING 3/4 PLT NUT HEX 3/4-10 PLT SUBFRAME PIVOT ARM INSIDE GREASE ZERK STRAIGHT 1/4-28 NUT HEX 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT 3 BOLT PIVOT CAST W/ BOLT H0LE HHCS 1/2-13X1 3/4 GR5 HHCS 3/4-10X7 GR5 SUBFRAME ARM RETAINER SUBFRAME FLEX ARM, INNER SUBFRAME FLEX ARM, OUTER SUBFRAME FLEX ARM SPACER,SHORT HHCS 7/8-9X8 1/2 GR5 NUT NY-LOK 7/8-9 PLT NUT LOCK 3/4-10 PLT SUBFRAME FLEX ARM SPACER, LONG (S/N S1402+) Shown (S/N S1402+) (S/N S1401-) (S/N S1401-) (S/N S1398-) (S/N S1398-) (S/N S1398-) Order with 802-441C. (S/N S1398-) (S/N S1398-) (S/N S1398-) (S/N S1022 - S1398) (S/N S1021-) Refer to Hydraulic Cylinder (810-299C 2X8X12 ROD) for breakdown Includes items 17 through 23 (discard 2 of 4 flatwashers upon installation). (S/N S1398-) (S/N S1046+) (S/N S1045+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1402+) Revision 2 is not interchangeable with revision 1st Revision. 06/06/18-65 - 195-110P
Table of Contents Center Subframe To Box Frame Part Number Index 15452 195-110P - 66-06/06/18
Table of Contents Part Number Index Box and Box Frames Center Subframe To Box Frame Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 6. 7. 8. 9. 10. 1 1 13. 14. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 24. 25. 26. dwg15452 803-031C 804-027C 194-129H 802-082C 120-247D 194-203H 194-125H 803-026C 802-070C 194-100D 805-156C 194-128H 805-104C 194-101D 802-441C 802-586C 800-001C 805-236C 810-299C 804-015C 803-020C 195-188H 802-095C 804-025C 803-028C 802-139C 194-516D 194-156H Image No. NUT HEX 1-8 PLT WASHER LOCK SPRING 1 PLT 6 1/8 EYE BOLT HHCS 1/2-13X1 3/4 GR5 3 BOLT PIVOT CAST W/ BOLT H0LE 3S-3000 OPENER SUBFRAME CENTER SUBFRAME CENTER NUT LOCK 3/4-10 PLT HHCS 3/4-10X6 GR5 TRUNNION CASTING MACHINED PIN ROLL 5/16 X 1 LG SUBFRAME PIVOT ARM INSIDE PIN COTTER 3/16 X 1 1/2 PLT PIVOT ARM WASHER HHCS 1 1/8-7X2 1/2 GR5 HHCS 1 1/8-7X2 GR5 FTHD GREASE ZERK STRAIGHT 1/4-28 PIN CLEVIS 1 X 3 7/8 USBLE PLT CYL 2X8X12 ROD (TIE ROD) WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SUBFRAME ARM RETAINER HHCS 3/4-10X7 GR5 WASHER FLAT 3/4 SAE PLT NUT NY-LOK 7/8-9 PLT HHCS 7/8-9X7 GR5 SUBFRAME FLEX ARM SPACER,SHORT SUBFRAME FLEX ARM, INNER (S/N S1399+) (S/N S1398-); Not shown (S/N S1398-) (S/N S1398-) (S/N S1398-); Order with 802-441C (S/N S1398-) (S/N S1398-) (S/N S1022 - S1398) (S/N S1021-) Refer to Hydraulic Cylinder (810-299C 2X8X12 ROD) for breakdown (S/N S1046+) (S/N S1046+) (S/N S1046+) (S/N S1399+) (S/N S1399+) (S/N S1399+) (S/N S1399+) Rev. 2 is not interchangeable w/rev. 1 1st rev. 06/06/18-67 - 195-110P
Table of Contents Seed Rate Adjustment Handle Part Number Index 15453 195-110P - 68-06/06/18
Table of Contents Part Number Index Feeder Cup Channels Seed Rate Adjustment Handle Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 2 2 23. 24. 25. 26. dwg15453 803-008C 804-009C 804-036C 802-014C 804-013C 804-012C 802-007C 800-003C 822-008C 804-001C 118-443H 804-021C 804-040C 109-069D 805-016C 803-016C 109-025H 801-001C 804-003C 819-001C 118-444H 804-002C 803-035C 803-088C 802-196C 817-087C Image No. NUT HEX 5/16-18 PLT WASHER LOCK SPRING 5/16 PLT WASHER FLAT 5/16 SAE PLT HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/8 SAE PLT HHCS 5/16-18X3/4 GR5 SNAP RING EXT 17 MM BRG BALL 17IDX40OD 6203 WASHER ADJ HANDLE BRG SEED RATE ADJ HANDLE WLDMNT WASHER FLAT 5/8 SAE PLT WASHER MACH 19 X.63 X 18GA ADJUSTMENT HANDLE PIVOT PIN COTTER 3/16 X 1 1/4 PLT NUT WING 1/2-13 PLT ADJ LOCK PLATE ASS'Y - 1 1/2 W SCREW RD HD 8-32 X 3/8 BRASS WASHER FLAT #8 BRASS NAME PLATE ADJ. GUIDE LONG SEED RATE ADJ WLDMNT WASHER INTERNAL STAR #8 BRASS NUT HEX 8-32 BRASS NUT HEX LOCK 1/4-20 FLG HFSS 1/4-20X5/8 GR5 1 3/4 WIDE FEEDER CUP PLUG 06/06/18-69 - 195-110P
Table of Contents 6" Feeder Cup Spacing Part Number Index 15454 195-110P - 70-06/06/18
Table of Contents Part Number Index Feeder Cup Channels 6" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 15. 16. 17. 18. 19. 20. 2 2 2 23. 24. 25. 26. 27. 28. 29. 30. 3 3 33. 34. dwg15454 118-431D 118-433D 118-437D 118-432D 802-004C 118-341D 195-105D 803-194C 804-031C 152-044D 118-434D 890-350C 801-035C 118-226S 118-508D 118-227E 118-336D 822-103C 800-004C 800-107C 109-091D 195-106D 890-190C 817-072C 817-074C 817-071C 817-069C 817-070C 817-068C 801-057C 817-004C 817-073C 817-075C 802-014C 804-013C 118-443D Image No. 3 BOX DIVIDER FOR 4 7/8 ROW BOX DVDR 4.00 X 60DEG BOX DVDR 5.13 X 60DEG 6 5/8 BOX DVDER FOR 8 1/2 ROW HHCS 1/4-20X3/4 GR5 2SNT SEED BOX DIVIDER CLIP 30'-6 20RW FEEDERCUP TRAY NUT HEX WHIZ 1/4-20 PLT WASHER RETAINING 454 FEEDER CUP SPACER SPACER TUBE X 454 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 FEEDER CUP BEARING ASSEMBLY BEARING HUB 40A15 RPBY 118-508D FEEDER CUP BEARING HOUSING BRG 30IDX55OD MM SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL 165 MACHINED ADJUSTMENT SPOOL 5/8SQ. 107 7/32 FEEDRCUP SHFT PM SEED CUP SPROCKET RPBY 890-190C SEED CUP SLEEVE SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP ASSEMBLY HHCS 3/8-16X3/4 GR5 WASHER LOCK SPRING 3/8 PLT SPACER TUBE X 207 Includes items 15 through 19. Includes items 24 through 30. 2nd Revision. Use existing stock; 1st Revision. 06/06/18-71 - 195-110P
Table of Contents 7 1/2" Feeder Cup Spacing Part Number Index 15455 195-110P - 72-06/06/18
Table of Contents Part Number Index Feeder Cup Channels 7 1/2" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. 18. 19. 20. 20. 2 2 23. 24. 25. 26. 27. 28. 29. 30. 3 3 33. 34. 35. 36. 37. 38. dwg15455 118-433D 118-340D 118-437D 118-370D 118-339D 118-356D 802-004C 118-341D 195-103D 890-350C 801-035C 803-194C 804-031C 118-376D 118-226S 800-004C 800-107C 822-103C 118-336D 118-508D 118-227E 118-347D 118-438D 152-044D 109-091D 118-439D 195-106D 817-071C 817-069C 817-070C 817-068C 801-057C 817-004C 817-073C 817-075C 817-072C 817-074C 804-013C 802-014C Image No. BOX DVDR 4.00 X 60DEG 5 5/8 BOX DVDR FOR 7 1/2 ROW BOX DVDR 5.13 X 60DEG 4 5/8 BOX DVDR FOR 8 ROW 4 13/16 BOX DVDR FOR 7 1/2 ROW BOX DIVIDER FOR 10 ROW HHCS 1/4-20X3/4 GR5 2SNT SEED BOX DIVIDER CLIP 30'-7 1/2 16RW FEEDERCUP TRAY 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 NUT HEX WHIZ 1/4-20 PLT WASHER RETAINING SPACER TUBE X 3.078 FEEDER CUP BEARING ASSEMBLY SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL 165 BRG 30IDX55OD MM FEEDER CUP BEARING HOUSING BEARING HUB 40A15 RPBY 118-508D SPACER TUBE X 3.266 SPACER TUBE X 3.579 454 FEEDER CUP SPACER MACHINED ADJUSTMENT SPOOL SPACER TUBE X 707 5/8SQ. 107 7/32 FEEDRCUP SHFT SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP ASSEMBLY RPBY 890-190C SEED CUP SLEEVE WASHER LOCK SPRING 3/8 PLT HHCS 3/8-16X3/4 GR5 Includes items 16 through 20 Includes items 27 through 33 2nd rev. Use existing stock; 1st rev. 06/06/18-73 - 195-110P
Table of Contents 10" Feeder Cup Spacing Part Number Index 15456 195-110P - 74-06/06/18
Table of Contents Part Number Index Feeder Cup Channels 10" Feeder Cup Spacing Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 16. 17. 18. 19. 20. 2 2 23. 24. 25. 26. 27. 28. 29. 30. 30. 3 3 dwg15456 118-432D 118-356D 802-004C 118-341D 195-104D 890-350C 801-035C 803-194C 804-031C 118-440D 118-226S 800-004C 800-107C 822-103C 118-336D 118-508D 118-227E 118-353D 109-091D 118-442D 195-106D 817-071C 817-069C 817-070C 817-068C 801-057C 817-004C 817-073C 817-075C 817-074C 890-190C 817-072C 804-013C 803-014C Image No. 6 5/8 BOX DVDER FOR 8 1/2 ROW BOX DIVIDER FOR 10 ROW HHCS 1/4-20X3/4 GR5 2SNT SEED BOX DIVIDER CLIP 30'-10 12RW FEEDERCUP TRAY 5/8 SHAFT LOCKING COLLAR SCREW SET 5/16-18 SKT KP X 3/8 NUT HEX WHIZ 1/4-20 PLT WASHER RETAINING SPACER TUBE X 5.079 FEEDER CUP BEARING ASSEMBLY SNAP RING EXT BASIC 1 3/16 SNAP RING INTERNAL 165 BRG 30IDX55OD MM FEEDER CUP BEARING HOUSING BEARING HUB 40A15 RPBY 118-508D 185C058TUBE X 6.578 MACHINED ADJUSTMENT SPOOL SPACER TUBE X 4.207 5/8SQ. 107 7/32 FEEDRCUP SHFT SEED CUP ADJUSTMENT HANDLE SEED CUP RIGHT HALF SEED CUP DOOR SEED CUP LEFT HALF SCR SELF TAP 8X3/8 TYPE25 BT NYLON WASHER-SPLIT SEED CUP WASHER RETAINER SEED CUP ASSEMBLY SEED CUP SLEEVE PM SEED CUP SPROCKET RPBY 890-190C WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT Includes items 12 through 16. Includes items 21 through 27. 2nd Revision. Use existing stock; 1st Revision. 06/06/18-75 - 195-110P
Table of Contents Vansco Shaft Monitor (Option) Part Number Index 27009 195-110P - 76-06/06/18
Table of Contents Part Number Index Feeder Cup Channels Vansco Shaft Monitor (Option) Ref. Part No. Part Description Comments Revision 3. 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. dwg27009 Image No. 823-059C VANSCO 2 CHANNEL SHAFT MONITOR 823-060C VANSCO 3 CHANNEL SHAFT MONITOR 823-076C VANSCO 2 CHNL SHAFT MNTR-2SNT 253001 VANSCO CONTROL BOX ASSY 2 CH 253000 VANSCO CONTROL BOX ASSY 3 CH 253701 VANSCO HARNESS 2 CH 40FT 253700 VANSCO HARNESS 3 CH 60FT VA-080002 REED SWITCH PICK-UP 804-088C WASHER FLAT #8 SAE PLT 804-043C WASHER LOCK #8 803-064C NUT HEX 8-32 116-181D VANSCO SWITCH BRACKET 801-067C SCREW RD HD 8-32 X 1 1/2LG PLT 801-016C SCREW RD HD 8-32 X 1/2 LG PLT 116-132K VANSCO MAGNET & CABLE TIE ASSY 890-321C VANSCO MAGNET 800-112C CABLE TIE.19X7.25 75D 50LB VA-VMM253501 MOUNTING BRACKET VA-253307 VANSCO MOUNTING KNOB KIT VA-JX-B77 BRYLITE CONSOLE END VA-JX-B76 BRYLITE HARNESS END 06/06/18-77 - 195-110P
Table of Contents Part Number Index Loup Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A) 34220 195-110P - 78-06/06/18
Table of Contents Part Number Index Feeder Cup Channels Loup Shaft Monitor (2 Channel 116-282A) (3 Channel 116-283A) Ref. Part No. Part Description Comments Revision 3. 4. 5. 6. 7. 8. 9. 10. 1 1 13. 14. 15. 16. 17. dwg34220 802-257C 800-052C 803-088C 770026 540017 710425 116-019D 801-199C 253100 116-020D 253017 253016 833-595C 318951 253017 833-596C 318917 Image No. HFSS 1/4-20X3/4 GR5 HOSE CLIP 5/8 I.D. NUT HEX LOCK 1/4-20 FLG CABLE TIE, NYLON MAGNET, ADHESIVE BACKED, LARGE NUT HEX JAM, PLASTIC M16 X 2 SHAFT SENSOR MOUNT SCR SELF TAP #10 X 3/4 LOUP SHAFT SENSOR 2&3 CHANNEL SMALL CUP SENSOR MOUNT LOUP 3 CHANNEL SHAFT MONITOR LOUP 2 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 30' 6P WP HARNESS 3 SHAFT MONITOR LOUP LOUP 3 CHANNEL SHAFT MONITOR SHAFT MONITOR EXT. 25' 4P WP HARNESS 2 SHAFT MONITOR LOUP 06/06/18-79 - 195-110P
Table of Contents Calibration Tray and Scale Part Number Index (Applies to 3S-3000 only) 68795 195-110P - 80-06/06/18