All-Flex Mower AFM4016 & AFM40200 (S/N ) P Parts Manual. Copyright 2017 Printed 08/10/17

Transcription

1 Table of Contents Part Number Index All-Flex Mower AFM4016 & AFM40200 (S/N ) P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2017 Printed 08/10/17 Cover photo may show optional equipment not supplied with standard unit.

2 Table of Contents Part Number Index Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frame...6 Center Deck Pivot...6 Pull Latch Cord Lock-Up...8 Right Hand and Left Hand Deck Pivot...10 Transport Frame...12 Transport Frame Tire and Hub...14 Section 3: Drivelines...16 Driveline Arrangement...16 Driveline All Decks ( C) Eurocardan...18 Driveline All Decks ( C) Walterscheid...20 Driveline All Decks ( C) Eurocardan...22 Driveline CV ( C) Walterscheid...24 Driveline CV W/ Clutch ( C) Eurocardan (AFM4214 S/N )(AFM4216 S/N )...26 Driveline Slip Clutch (053314)...28 Driveline Slip Clutch ( ) Eurocardan...30 Driveline Slip Clutch ( ) Eurocardan...32 Driveline W/Clutch All Decks ( C) Walterscheid...34 Section 4: Decks...36 Belt Drive Center and Right Hand Deck (S/N )...36 Belt Drive Center and Right Hand Deck (S/N )...40 Belt Drive Left Hand Deck ( )...42 Belt Drive Left Hand Deck (S/N )...44 Belt Take-Up Handle...48 Channel Center Deck...50 Channel Left Deck...52 Channel Right Hand Deck...54 Deck and Roller...56 Section 5: Gauge Wheels...58 Gauge Wheel Center Deck (S/N )...58 Gauge Wheel Left & Right Hand Deck (S/N )...60 Gauge Wheel Left & Right Hand Deck (S/N )...62 Gauge Wheels C and C) (S/N )..66 Gauge Wheels Center Deck (S/N )...68 Section 6: Gearboxes...70 Gearbox 4-Way Splitter ( C) ITG (S/N )...70 Gearbox 4-Way Splitter ( C) Comer S/N to )...72 Gearbox 4-Way Splitter ( C) OMNI (S/N )...74 Gearbox Center & Right Deck ( C) OMNI (S/N to )...76 Gearbox Center & Right Deck ( C) OMNI S/N ( to )...78 Gearbox Center & Right Deck ( C) Comer (S/N )...80 Gearbox Left Deck ( C) Comer (S/N )...82 Gearbox Left Deck ( C) ITG (S/N )...84 Gearbox Left Deck ( C) OMNI (S/N to )...86 Gearbox Left Deck ( C) Comer (S/N )...88 Gearbox Right Deck ( C) Comer (S/N )...90 Gearbox Right Deck ( C) ITG (S/N )...92 Section 7: Hydraulics...94 Hydraulic Arrangement...94 Hydraulic Cylinder ( C)...96 Hydraulic Cylinder ( C) Cross...98 Hydraulic Cylinder ( C) Midway Hydraulic Cylinder ( C) Red Lion Hydraulic Cylinder ( C) Midway Hydraulic Cylinder ( C) Red Lion Section 8: Labels Alert Label Placement Label Placement Touch-up Paints Part Number Index Copyright 201 All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

3 Table of Contents Part Number Index Alphabetized Table of Contents A B C D G Alert Label Placement Belt Drive Center and Right Hand Deck (S/N )...36 Belt Drive Center and Right Hand Deck (S/N )...40 Belt Drive Left Hand Deck ( )...42 Belt Drive Left Hand Deck (S/N )...44 Belt Take-Up Handle...48 Center Deck Pivot...6 Channel Center Deck...50 Channel Left Deck...52 Channel Right Hand Deck...54 Deck and Roller...56 Driveline Arrangement...16 Driveline All Decks ( C) Eurocardan...18 Driveline All Decks ( C) Walterscheid...20 Driveline All Decks ( C) Eurocardan...22 Driveline CV ( C) Walterscheid...24 Driveline CV W/ Clutch ( C) Eurocardan (AFM4214 S/N )(AFM4216 S/N )...26 Driveline Slip Clutch (053314)...28 Driveline Slip Clutch ( ) Eurocardan...30 Driveline Slip Clutch ( ) Eurocardan...32 Driveline W/Clutch All Decks ( C) Walterscheid...34 Gauge Wheel Center Deck (S/N )...58 Gauge Wheel Left & Right Hand Deck (S/N )..60 Gauge Wheel Left & Right Hand Deck (S/N )...62 Gauge Wheels C and C) (S/N )...66 Gauge Wheels Center Deck (S/N )...68 Gearbox 4-Way Splitter ( C) ITG (S/N )...70 Gearbox 4-Way Splitter ( C) Comer S/N to )...72 Gearbox 4-Way Splitter ( C) OMNI (S/N )...74 Gearbox Center & Right Deck ( C) OMNI (S/N to )...76 Gearbox Center & Right Deck ( C) OMNI S/N ( to )...78 Gearbox Center & Right Deck ( C) Comer (S/N )...80 Gearbox Left Deck ( C) Comer (S/N )..82 Gearbox Left Deck ( C) ITG (S/N )...84 Gearbox Left Deck ( C) OMNI (S/N to )...86 H L P R T Gearbox Left Deck ( C) Comer (S/N )...88 Gearbox Right Deck ( C) Comer (S/N )...90 Gearbox Right Deck ( C) ITG (S/N )...92 Hydraulic Arrangement...94 Hydraulic Cylinder ( C)...96 Hydraulic Cylinder ( C) Cross...98 Hydraulic Cylinder ( C) Midway Hydraulic Cylinder ( C) Red Lion Hydraulic Cylinder ( C) Midway Hydraulic Cylinder ( C) Red Lion Label Placement Touch-up Paints Pull Latch Cord Lock-Up...8 Right Hand and Left Hand Deck Pivot...10 Transport Frame...12 Transport Frame Tire and Hub /10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 3

4 Table of Contents Part Number Index 4 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

5 Table of Contents Part Number Index 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 5

6 Center Deck Pivot Table of Contents Part Number Index Section 2: Frame AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

7 Table of Contents Center Deck Pivot Section 2: Frame Part Number Index Ref. Part No. Part Description Comments Revision dwg H H D C H C C C D D C C C C H C C C C C C C C Drawing Image Number AFM4014 & 16 REAR DECK PIVOT REAR DECK PIVOT TUBE 168/200 REAR DECK CYL LUG PIN HHCS 1/4-20X2 GR5 REAR DECK CYL LUG WELD GREASE ZERK STRAIGHT 1/4-28 HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT PUSH, PIVOT TUBE HALF CLAMP PIVOT TUBE WEAR PAD CYL 5X8X12 ROD (TIE)1 PIN CYL 2X8X12 ROD SINGLE ACTING PIVOT STOP SPRING PIN CLEVIS 1 X 4 3/4 USABLE FLIP LATCH WLDMNT RH WASHER FLAT 1 USS PLT NUT LOCK 1/4-20 PLT ZERK GREASE 1/4-28 THD FORMING PIN COTTER 3/16 X 1 3/4 PLT WASHER FLAT 1/2 SAE PLT PIN CLEVIS 1 X 2 3/4 USABLE LG PIN ROLL 3/16X1 1/4 PLT PIN, HAIR COTTER 3/16 WIRE DIA (S/N ) (S/N ) (S/N ) (S/N ) S/N + S/N - Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 7

8 Table of Contents Pull Latch Cord Lock-Up Part Number Index Section 2: Frame AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

9 Table of Contents Pull Latch Cord Lock-Up Section 2: Frame Part Number Index Ref. Part No. Part Description Comments Revision dwg C C C K Drawing Image Number CORD-PARACHUTE 3/16 5/32 I.D. OVAL SLEEVE WELDED RING 1/4 X 2 DECK LATCH PULL ROPE KIT-FRONT * NOTES: When Installing Cord to Deck Latchs Be Sure to Apply Tension to Cord For Poper Operation. Right & Left Hand Deck 34" Long and Center 44" Long. Frame to Tractor 156" Long. Total Length 23 Ft. Sold only in 12" increments 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 9

10 Table of Contents Right Hand and Left Hand Deck Pivot Part Number Index Section 2: Frame AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

11 Right Hand and Left Hand Deck Pivot Section 2: Frame Ref. Part No. Part Description Comments Revision dwg C C H C C C C C C D D C C H H C C C H H C C C C Drawing Image Number CYL 5X12X25 ROD (TIE ROD) ZERK GREASE 1/4-28 THD FORMING WING FLEX LUG AFM40168/200 BUSHING CYL 1 1/4 X 1 X 1 3/8 BUSHING CYL 1 1/4 X 1 X 1 HHCS 5/16-18X2 GR5 HHCS 1/4-20X2 GR5 NUT LOCK 5/16-18 PLT NUT LOCK 1/4-20 PLT TOOLBAR PIVOT PIN DECK FLEX PIVOT PIN PIN CLEVIS 1 X 4 3/4 USABLE PIVOT STOP SPRING FLIP LATCH WLDMNT RH FLIP LATCH WELDMENT LH WASHER FLAT 1 SAE WASHER FLAT 1 USS PLT PIN COTTER 3/16 X 1 3/4 PLT RH WING TOOL BAR AFM40200 LH WING TOOL BAR AFM40200 ZERK 1/4-28 X 45 DEG SELF-TAP HHCS 5/16-18X2 GR5 NUT LOCK 5/16-18 PLT PIN COTTER 5/32 X 1 1/4 LG Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 11

12 Transport Frame Table of Contents Part Number Index Section 2: Frame AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

13 Table of Contents Transport Frame Section 2: Frame Part Number Index Ref. Part No. Part Description Comments Revision dwg H H H C C C C C D C C H H C C C H C C C C C D H D C C C D C C E E A C C C C Drawing Image Number AFM4014/16 TRANSPORT FRAME TRANSPORT FRAME FRAME WELDMENT AFM40168/200 SCREW JACK 2000# PIN HITCH 3/4 X 4 3/8 HHCS 3/4-10X6 1/2 NUT HEX 3/4-10 PLT WASHER LOCK SPRING 3/4 PLT WASHER, SAFETY CHAIN WASHER FLAT 3/4 USS PLT SAFETY CHAIN LB FRONT HITCH LUG WELDMENT SWIVEL HITCH-FRONT AFM168/200 HHCS 3/4-10X7 1/2 GR5 HHCS 3/4-10X7 GR5 WASHER FLAT 1/2 SAE PLT FRONT P.T.O. MOUNT PIN COTTER 1/8 X 1 1/4 PLT HHCS 1-8X5 1/2 GR5 WASHER FLAT 1 USS PLT NUT HEX 1-8 NYLON INSERT PLT NUT HEX NYLOCK 5/8-11 PLT BALL SWIVEL MOUNT BOTTOM PLATE BALL SWIVEL MOUNT PLATE HITCH SPACER TUBE HHCS 1-8X5 GR5 HHCS 5/8-11X4 GR5 WASHER FLAT 5/8 USS PLT AFM4014/16 BOLT-IN SPINDLE HHCS 1/2-13X3 1/4 GR5 NUT LOCK 1/2-13 PLT AFM4014/16 RH BOLTIN SPIN. ARM AFM4014/16 LH BOLTIN SPIN. ARM 4014/16 BOLT-IN SPIN SHIPOUT HHCS 1/4-20X1/2 GR2 MANUAL STORAGE CONTAINER WASHER LOCK SPRING 1/4 PLT WASHER FLAT 1/4 SAE PLT (S/N ) (S/N <->290605) (S/N ) (S/N ) (S/N ) When Ording New Chain Also Order D (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) For replacement on (S/N ) S/N S/N S/N S/N Rev. 3 not compat. w/rev. Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 13

14 Table of Contents Transport Frame Tire and Hub Part Number Index Section 2: Frame AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

15 Table of Contents Transport Frame Tire and Hub Section 2: Frame Part Number Index Ref. Part No. Part Description Comments Revision dwg C S6B 2L C C C C C C C C B0-47 N/A C C Drawing Image Number TIRE & WHL ASSY 23 X CL TIRE 23X P TM TL CL TIRE 23X P TRFCHIEF TILDEN RIM 12X8.50,8SPOKED BLK CL RIM ASSY 5 BOLT-12 X 8 1/2 VALVE STEM TR412 NUT HEX SLOTTED 3/4-16 WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG HUB ASSY 5 BOLT 4 1/2" B.C. TINE GAUGE WHEEL HUB SEAL BEARING CONE 1 BEARING CUP L44610 NEILSON STUD 1/2-20UNFX1 13/16 NEILSON 5 BOLT HUB NUT LUG 1/2-20 X 60 DEG PLT RPBY C) GREASE CAP#1518 Includes one each of items 2; 3; & Turf Mate Turf Chief (S/N ) (S/N ) Includes one each of items 9; 13 & 15; two each of items 10 & 11 and five each of items 12 & 1 Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 15

16 Table of Contents Driveline Arrangement Part Number Index Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

17 Table of Contents Driveline Arrangement Section 3: Drivelines Part Number Index Ref. Part No. Part Description Comments Revision dwg C C C C H H H C C C C C C C C A D C C C C C A C Drawing Image Number HHCS 1/2-13X1 1/4 GR5 NYL HHCS 1/2-13X1 1/4 GR5 HHCS 1/2-13X1 GR5 WASHER LOCK SPRING 1/2 PLT AFM14,16,22 SPLITTER BOX COVER 4-WAY BOX COVER-COMER SPLITTER BOX COVER AFM40200 PTO 2200 X 386 W/CLUTCH PTO CAT. 3 X 34 HHCS 1/2-13X2 1/4 GR5 GBOX DIVIDER OMNI :1 RPBY A 4-WAY SPLITTER BOX 1:1 RATIO PTO CV 2480 X 55 NO CLUTCH OBSOLETE RPBY A AFM14/16 CV DRVLN KIT 4-WAY COVER SPACER STUD WASHER FLAT 1/2 USS HARD PLT WASHER FLAT 1/2 SAE PLT NUT HEX 1/2-13 PLT HHCS 1/2-13X2 3/4 GR5 OBSOLETE RPBY A AFM14/16 CV DRVLN KIT PTO CAT.2 X 41 (S/N ) (S/N <->287707) (S/N ) (S/N ) (S/N <->272759) (S/N ) AFM40200 only (S/N ) (S/N ) Optional (S/N <->272759) (S/N <->87707)) (S/N <->272759) (S/N <->272759) (S/N ) S/N S/N Rev. 3 not compat. w/rev. Rev. 2 not compat. w/rev. Rev. 1 Rev. 3 not compat. w/rev. Rev. 2 not compat. w/rev. Rev. 1 Rev. 3 not compat. w/rev. Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 17

18 Driveline All Decks ( C) Eurocardan Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

19 Driveline All Decks ( C) Eurocardan Section 3: Drivelines Ref. Part No. Part Description Comments Revision dwg C C C C Drawing Image Number PTO CAT. 3 X 34 EC YOKE ASSEMBLY REP BY EC CROSS ASSEMBLY EC 8X65-DIN-1481 O/TUBE R/PIN EC OUTER TUBE YOKE EC OUTER TUBE RPBY DECAL DANGER GUARD MISS PTO EC TUBE BEARING RPBY EC OUTER TUBE RIGID CONE RPBY EC OUTER TUBE RPBY EC SOFT CONE RPBY DECAL DANGER PTO DRIVELINE EC INNER TUBE RPBY EC INNER TUBE RIGID CONE RPBY DRIVELINE SHIELD SAFETY CHAIN EC INNER TUBE RPBY EC INNER TUBE YOKE EC YOKE ASSEMBLY REP BY EC SOFT LONG CONE EC PULL COLLAR KIT EC PULL COLLAR KIT EC TWIST COLLAR KIT (TRT. END) EC TWIST COLLAR KIT (IMP. END) SHIELD KIT, AX3 & AX4 WC ZERK M8 X 1 X 45 DEG Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 19

20 Driveline All Decks ( C) Walterscheid Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

21 Driveline All Decks ( C) Walterscheid Section 3: Drivelines Ref. Part No. Part Description Comments Revision dwg C C C C Drawing Image Number PTO CAT. 3 X 34 WS YOKE 1 3/8-6 SPL ASGE RPBY WS ASGE COLLAR KIT RPBY WS CROSS & BRG KIT WS INBOARD YOKE WS SPRING PIN WS INNER PROFILE C WS SHIELD CONE - 5 RIB WS BEARING RING - SC25 WS OUTER SHIELD TUBE OVL WS INNER SHIELD TUBE RND WS SHIELD CONE 10 RIB WS YOKE W/OTR PROFILE C WS SCREW DRIVELINE SHIELD SAFETY CHAIN DECAL DANGER GUARD MISS PTO DECAL DANGER PTO DRIVELINE SHIELD KIT, W2300 Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 21

22 Driveline All Decks ( C) Eurocardan Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

23 Driveline All Decks ( C) Eurocardan Section 3: Drivelines Ref. Part No. Part Description Comments Revision dwg C C C C Drawing Image Number PTO CAT.2 X 41 EC YOKE ASSEMBLY EC CROSS ASSEMBLY ( U JOINT) EC OUTER TUBE YOKE EC 08X DIN ROLL PIN EC INNER TUBE EC INNER TUBE ( ) 720MM EC INNER TUBE YOKE EC YOKE ASSEMBLY EC 8X55-DIN-1481 O/TUBE R/PIN EC TUBE BEARING EC OUTER TUBE RIGID CONE EC STIFFENING RING EC SOFT CONE EC PIN STOP ROTATION EC OUTER TUBE SHIELD EC INNER SHIELD TUBE EC SOFT LONG CONE EC INNER TUBE RIGID CONE EC TUBE BEARING DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO DRIVELINE SHIELD SAFETY CHAIN EC GREASE ZERK M6X1 STRAIGHT EC PULL COLLAR REPLACEMENT KIT SHIELD KIT, AX3 & AX4 WC ZERK M8 X 1 X 45 DEG (S/N ) 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 23

24 Table of Contents Driveline CV ( C) Walterscheid Part Number Index Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

25 Driveline CV ( C) Walterscheid Section 3: Drivelines Ref. Part No. Part Description Comments Revision dwg C C C C Drawing Image Number PTO CV 2480 X 55 NO CLUTCH WS YOKE 1 3/8-6 ASGE WS DOUBLE YOKE WS GREASE ZERK WS INBOARD YOKE 1B WS CROSS & BEARING KIT WS SPRING PIN 10 X 75 WS INNER PROFILE 1BGA WS PROFILE & SLEEVE WS INBOARD YOKE WS YOKE 1 3/8-6 ASGE WS CROSS BEARING KIT WS BEARING RING - SC25 WS OUTER SHIELD TUBE OVL WS INNER SHIELD TUBE RND WS CV CONE & BEARING ASSY WS SHIELD CONE 3 RIB WS SHIELD CONE 6 RIB WS SCREW DRIVELINE SHIELD SAFETY CHAIN DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO WS SUPPORT BEARING WS ZERK WS ASGE COLLAR KIT RPBY SHIELD KIT, C WS REINFORCING COLLAR Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 25

26 Table of Contents Part Number Index Section 3: Drivelines Driveline CV W/ Clutch ( C) Eurocardan (AFM4214 S/N )(AFM4216 S/N ) AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

27 Section 3: Drivelines Table of Contents Part Number Index Driveline CV W/ Clutch ( C) Eurocardan (AFM4214 S/N )(AFM4216 S/N ) Ref. Part No. Part Description Comments Revision Dwg A C C C C Drawing Image Number AFM14/16 CV DRVLN KIT OB RPBY A * EC PULL TYPE YOKE RPBY EC G06 CROSS ASSEMBLY EC HOMOKINETIC JOINT EC OUTER TUBE HOMOKINETIC YOKE EC 10X80-DIN-1481 O/TUBE R/PIN EC OUTER TUBE EC INNER TUBE 960MM EC 10X70 ROLL PIN EC INNER TUBE YOKE EC CROSS ASSEMBLY EC BD4/6 1600NM PULL EVOLUTION RPBY EC WIDE ANGLE PROTECTION EC SOFT CONE EC BRG SOFT CONE EC SELF THREADING SCREW EC TUBE BRG (OUTER TUBE) EC STIFFENING RING EC SHORT CONE EC STOP RING EC SAFETY SLEEVE EC OUTER TUBE SHIELD EC INNER TUBE SHIELD EC TUBE BRG (INNER TUBE) DRIVELINE SHIELD SAFETY CHAIN DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO EC GREASE ZERK M6X1 EXTRA SHRT EC PULL COLLAR KIT EVOLUTION EC PUSH-PIN KIT CV YOKES 1 3/8 SHIELD KIT, C (AFM4214 S/N )(AFM4216 S/N ) (AFM4214 S/N )(AFM4216 S/N ) Pull collar yoke Push-pin yoke Pull collar yoke Push-pin yoke (S/N ) 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 27

28 Table of Contents Driveline Slip Clutch (053314) Part Number Index Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

29 Table of Contents Driveline Slip Clutch (053314) Section 3: Drivelines Part Number Index Ref. Part No. Part Description Comments Revision dwg Drawing Image Number WS FRICTION CLUTCH WS SNAP RING WS FLANGED RING WS LOCK COLLAR WS COMPRESSION SPRNG WS BACK UP RING WS BALL WS HEX NUT M8 WS BELLEVILLE SPRING WS THRUST PLATE WS FRICTION DISK WS HUB 1 3/8-6 SPL WS CLUTCH HOUSING WS Q.D. FLG. KIT To increase NM to 650 use 2 ea /10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 29

30 Driveline Slip Clutch ( ) Eurocardan Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

31 Driveline Slip Clutch ( ) Eurocardan Section 3: Drivelines Ref. Part No. Part Description Comments Revision dwg Drawing Image Number RPBY EC CONICAL CLAMP KIT (1 3/8) EC SCREW EC CLOSURE FLANGE EC INT. FLANGE EC FRICTION DISC EC HUB WITH FLANGE (1 3/8-6) EC INTERMEDIARY FLANGE EC HUB DISC EC SPRING FLANGE EC SPRING KIT (R1300Nm) RPBY EC CLUTCH BUSHING EC OUTER BODY FOR BC EC CLUTCH (CLAMP TYPE SPLINE END) 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 31

32 Driveline Slip Clutch ( ) Eurocardan Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

33 Driveline Slip Clutch ( ) Eurocardan Section 3: Drivelines Ref. Part No. Part Description Comments Revision dwg Drawing Image Number EC CLUTCH BD4/6 1600Nm EC OUTER BODY FOR BD4/6 EC HUB WITH FLANGE 38-6 EC PULL COLLAR KIT EC SCREW M8 X 16 EC CLOSURE FLANGE EC SPRING KIT (V1600Nm) EC PRESSURE FLANGE EC FRICTION DISC EC INT. FLANGE EC HUB DISC EC CLUTCH BUSHING 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 33

34 Driveline W/Clutch All Decks ( C) Walterscheid Section 3: Drivelines AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

35 Driveline W/Clutch All Decks ( C) Walterscheid Section 3: Drivelines Ref. Part No. Part Description Comments Revision dwg C C C C Drawing Image Number PTO 2200 X 386 W/CLUTCH WS ASGE YOKE 1 3/8-6 SPL. RPBY WS ASGE COLLAR KIT RPBY WALTSCHEID CROSS & BRG KIT WALTERSCHEID INBOARD YOKE WALTERSCHEID SPRING PIN WS INNER PROFILE C WALTERSCHEID SHIELD CONE-4 RIB WALTERSCHEID BEARING RING WS OUTER SHIELD OVL. RPBY WS INNER SHIELD RND. RPBY WS YOKE W/OTR PROFILE C WALTERSCHEID SCREW WALTERSCHEID SAFETY CHAIN WS FRICTION CLUTCH DECAL DANGER PTO DRIVELINE DECAL DANGER GUARD MISS PTO WALTERSCHEID SHIELD CONE-10RIB WS ZERK WS SUPPORT BEARING SHIELD KIT, C WS REINFORCING COLLAR (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 35

36 Belt Drive Center and Right Hand Deck (S/N ) Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

37 Belt Drive Center and Right Hand Deck (S/N ) Section 4: Decks Ref. Part No. Part Description Comments Revision dwg S C C S C C C C C C C C C C C C C C C C C H C C H S D C C C C D D C D C D C C D C C C C D C C D D C A A Drawing Image Number CCW SPDLE HUB ASSY 6PUL 8TB HHCS 5/8-11X2 3/4 GR5 FLAT IDLER PULLEY 6 O.D. CCW SPINDLE HUB ASSY 6PUL 3TB HHCS 7/16-20X1 1/2 GR8 B-GROOVE IDLER PULLEY 6.25 OD WASHER LOCK 7/16 PLT NUT HEX 7/16-20 PLT MWR BLD 5/16 X 25 SD LL CCW MWR BLD 1/4 X 25 SD HL CCW MWR BLD 1/4 X 25SD ML CCW MWR BLD MULCH 1/4X25SD CCW WASHER BLADE 2ODX.56THKX.51ID HFS 1/2-20X1 1/4 L.H. THD GR5 HFS 1/2-20X2 LH GR8 WASHER LOCK SPRING 5/8 PLT NUT LOCK 5/8-18 NYLOK COLLAR P V-BELT B E.L. KEVLAR SPRING EXT BELT HANDLE SP EYE 1/4-20X4 1/4-4 1/2 SP EYE 1/4-20X2 3/4 SPRING EYE-BOLT BRACKET NUT HEX 3/8-16 PLT NUT HEX 1/4-20 PLT OVER-CENTER LATCH-90 CCW BELT TAKE-UP HANDLE IDLER PULLEY SPACER-SHORT SNAP RING EXT 7/16 HFS 1/2-20X1 1/4 L.H. THD GR5 HFS 1/2-20X2 LH GR8 WASHER BLADE 2ODX.56THKX.51ID BLADE HUB C.C.W. RPBY S BEARING 206 BLADE HUB- MACH.-90 B-GROOVE DRIVE PULLEY 6 O.D. 1/4 SQ. KEY X 7/8 LG NUT HEX 3/4-16LH NYLOC COLLAR ZERK 5/16-24 STRAIGHT #1711B LUBE FITTING 3" EXTENSION WASHER FLAT 3/4 HARD ASTMF436 WASHER FLAT 3/4 SAE PLT BEARING 6206 W/ METAL SHIELD BEARING CENTER GREASE TUBE HHCS 1/2-20X1 3/4 GR5 HHCS 1/2-20X1 GR L.H. THREAD BLADE BAR BLADE WASHER-90 NUT HEX 1/2-20 PLT AFM 16FT MWR BLD KIT-LL AFM 16FT MWR BLD KIT-ML Includes items 23 through 32, 34, 35 & 36 Includes items 23 through 35 Standard Low Lift Blades 3 per Deck Optional High Lift Blades 3 per Deck Optional Medium Lift Blades 3 per Deck Optional Mulch Blades 3 per Deck For counter bored shaft (S/N ) (S/N ) (S/N ) (S/N ) For counter bored shaft (S/N ) (S/N ) Was changed from tapped holes to drilled holes S/N ) (S/N ) Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 Rev 1; Use up stock Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 37

38 Belt Drive Center and Right Hand Deck (S/N ) (continued) Section 4: Decks Ref. 4 4 Part No A A Part Description AFM 16FT MWR BLD KIT-HL AFM 16FT MULCH MWR BLD KIT Comments Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Revision 38 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

39 Belt Drive Center and Right Hand Deck (S/N ) (continued) Section 4: Decks This Page Intentionally Left Blank 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 39

40 Belt Drive Center and Right Hand Deck (S/N ) Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

41 Belt Drive Center and Right Hand Deck (S/N ) Section 4: Decks Ref. Part No. Part Description Comments Revision dwg C C S C C C C C C C C C C C C C C C C H C H S D C C C R C C C D C C C D D C D C C D C C C C A A A A Drawing Image Number HHCS 5/8-11X2 3/4 GR5 FLAT IDLER PULLEY 6 O.D. CCW SPIN. ASSY 6" COM. UNIT HHCS 7/16-20X1 1/2 GR8 B-GROOVE IDLER PULLEY 6.25 OD WASHER LOCK 7/16 PLT NUT HEX 7/16-20 PLT MWR BLD 5/16 X 25 SD LL CCW MWR BLD 1/4 X 25 SD HL CCW MWR BLD 1/4 X 25SD ML CCW MWR BLD MULCH 1/4X25SD CCW WASHER BLADE 2ODX.56THKX.51ID HFS 1/2-20X1 1/4 L.H. THD GR5 HFS 1/2-20X2 LH GR8 WASHER LOCK SPRING 5/8 PLT NUT LOCK 5/8-18 NYLOK COLLAR P V-BELT B E.L. KEVLAR SPRING EXT BELT HANDLE SP EYE 3/8-16X 3 7/8 SPRING EYE-BOLT BRACKET NUT HEX 3/8-16 PLT OVER-CENTER LATCH-90 CCW BELT TAKE-UP HANDLE IDLER PULLEY SPACER-SHORT SNAP RING EXT 7/16 GREASE ZERK STRAIGHT 1/8-27NPT GREASE ZERK 1/8NPT 45-DEG TUBE NYLON 1/4OD X 062WL FTG TUBE, PUSH CONNECT 1/8NPT FTG TUBE,CONNECTOR 1/8 MNPT NUT HEX 3/4-16LH NYLOC COLLAR 1/4 SQ. KEY X 7/8 LG WASHER FLAT 3/4 HARD ASTMF436 B-GROOVE DRIVE PULLEY 6 O.D. BEARING 6206 W/ METAL SHIELD BLADE HUB - MACH RPBY S BEARING L.H. BLADE BAR HHCS 1/2-20X1 3/4 GR5 HHCS 1/2-20X1 GR5 BLADE WASHER-90 NUT HEX FLG. LOCK 1/2-20 PLT. NUT HEX 1/2-20 PLT HALF-CLIP 5/16 DIA. HOSE SCREW HEX SELF-TAP 1/4-20X 1/2 AFM 16FT MWR BLD KIT-LL AFM 16FT MWR BLD KIT-ML AFM 16FT MWR BLD KIT-HL AFM 16FT MULCH MWR BLD KIT Standard Low Lift Blades 3 per Deck Optional High Lift Blades 3 per Deck Optional Medium Lift Blades 3 per Deck Optional Mulch Blades 3 per Deck For counter bored shaft (S/N ) (S/N ) Order Per Foot as Required S/N S/N (S/N ) (S/N ) (S/N ) (S/N ) Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 41

42 Table of Contents Belt Drive Left Hand Deck ( ) Part Number Index Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

43 Table of Contents Belt Drive Left Hand Deck ( ) Section 4: Decks Part Number Index Ref. Part No. Part Description Comments Revision dwg S C C C H H C C C C C C C C C C C C C C C C D C S C C R C C C D C C C D D C D C C D C C C C A A A A Drawing Image Number CW SPIN. ASSY 6" COM. UNIT HHCS 7/16-20X1 1/2 GR8 NUT HEX 3/8-16 PLT SNAP RING EXT 7/16 SPRING EYE-BOLT BRACKET OVER-CENTER LATCH-90 SP EYE 3/8-16X 3 7/8 SPRING EXT BELT HANDLE WASHER LOCK 7/16 PLT NUT HEX 7/16-20 PLT MWR BLD 5/16 X 25SD LL CW MWR BLD 1/4 X 25SD HL CW MWR BLD 1/4 X 25SD ML CW MWR BLD MULCH 1/4X25SD CW WASHER BLADE 2ODX.56THKX.51ID HFS 1/2-20X1 1/4 GR5 HFS 1/2-20X2 GR8 V-BELT B E.L. KEVLAR NUT LOCK 5/8-18 NYLOK COLLAR P WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 3/4 GR5 FLAT IDLER PULLEY (6 3/4 O.D.) IDLER PULLEY SPACER-SHORT B-GROOVE IDLER PULLEY 6.25 OD AFM BELT TAKE UP HANDLE GREASE ZERK STRAIGHT 1/8-27NPT GREASE ZERK 1/8NPT 45-DEG TUBE NYLON 1/4OD X 062WL FTG TUBE, PUSH CONNECT 1/8NPT FTG TUBE,CONNECTOR 1/8 MNPT NUT LOCK 3/4-16 NYLOC COLLAR 1/4 SQ. KEY X 7/8 LG WASHER FLAT 3/4 HARD ASTMF436 B-GROOVE DRIVE PULLEY 6 O.D. BEARING 6206 W/ METAL SHIELD BLADE HUB - MACH REP BY S BEARING R.H. BLADE BAR HHCS 1/2-20X1 3/4 GR5 HHCS 1/2-20X1 GR5 BLADE WASHER-90 NUT HEX FLG. LOCK 1/2-20 PLT. NUT HEX 1/2-20 PLT HALF-CLIP 5/16 DIA. HOSE SCREW HEX SELF-TAP 1/4-20X 1/2 AFM 16FT MWR BLD KIT-LL AFM 16FT MWR BLD KIT-ML AFM 16FT MWR BLD KIT-HL AFM 16FT MULCH MWR BLD KIT Includes items 24 through 32 Standard Low Lift Blades 3 per Deck Optional High Lift Blades 3 per Deck Optional Medium Lift Blades 3 per Deck Optional Mulch Blades 3 per Deck For counter bored shaft (S/N ) (S/N ) Order Per Foot as Required S/N S/N (S/N ) (S/N ) (S/N ) (S/N ) Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 43

44 Belt Drive Left Hand Deck (S/N ) Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

45 Belt Drive Left Hand Deck (S/N ) Section 4: Decks Ref. Part No. Part Description Comments Revision dwg S C S C C C H H C C C C C C C C C C C C C C C C C D C S C C C D D C D C D C C D C C C C D D C C D C A A Drawing Image Number CW SPDLE HUB ASSY 6"PULL 3"TB HHCS 7/16-20X1 1/2 GR8 CW SPDLE HUB ASSY 6"PULL 8TB NUT HEX 3/8-16 PLT NUT HEX 1/4-20 PLT SNAP RING EXT 7/16 SPRING EYE-BOLT BRACKET OVER-CENTER LATCH-90 SP EYE 1/4-20X4 1/4-4 1/2 SP EYE 1/4-20X2 3/4 SPRING EXT BELT HANDLE WASHER LOCK 7/16 PLT NUT HEX 7/16-20 PLT MWR BLD 5/16 X 25SD LL CW MWR BLD 1/4 X 25SD HL CW MWR BLD 1/4 X 25SD ML CW MWR BLD MULCH 1/4X25SD CW WASHER BLADE 2ODX.56THKX.51ID HFS 1/2-20X1 1/4 GR5 HFS 1/2-20X2 GR8 V-BELT B E.L. KEVLAR NUT LOCK 5/8-18 NYLOK COLLAR P WASHER LOCK SPRING 5/8 PLT HHCS 5/8-11X2 3/4 GR5 FLAT IDLER PULLEY 6 O.D. IDLER PULLEY SPACER-SHORT B-GROOVE IDLER PULLEY 6.25 OD AFM BELT TAKE UP HANDLE HFS 1/2-20X1 1/4 GR5 HFS 1/2-20X2 GR8 WASHER BLADE 2ODX.56THKX.51ID BLADE HUB REP BY S BEARING 206 BLADE HUB- MACH.-90 B-GROOVE DRIVE PULLEY 6 O.D. 1/4 SQ. KEY X 7/8 LG NUT LOCK 3/4-16 NYLOC COLLAR ZERK 5/16-24 STRAIGHT #1711B LUBE FITTING 3" EXTENSION WASHER FLAT 3/4 HARD ASTMF436 WASHER FLAT 3/4 SAE PLT BEARING 6206 W/ METAL SHIELD BEARING CENTER GREASE TUBE 4016 R.H. BLADE BAR HHCS 1/2-20X1 3/4 GR5 HHCS 1/2-20X1 GR5 BLADE WASHER-90 NUT HEX 1/2-20 PLT AFM 16FT MWR BLD KIT-LL AFM 16FT MWR BLD KIT-ML Includes items 23 through 35 Includes items 23 through 32, 34, 35 & 36 (S/N ) (S/N ) (S/N ) (S/N ) Standard Low Lift Blades 3 per Deck Optional High Lift Blades 3 per Deck Optional Medium Lift Blades 3 per Deck Optional Mulch Blades 3 per Deck For counter bored shaft For counter bored shaft Was changed from tapped holes to drilled holes S/N ) (S/N ) (S/N ) (S/N ) Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Rev. 2 Rev 1; Use up stock Rev. 2 not compat. w/rev. Rev. 2 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 45

46 Belt Drive Left Hand Deck (S/N ) (continued) Section 4: Decks Ref. 4 4 Part No A A Part Description AFM 16FT MWR BLD KIT-HL AFM 16FT MULCH MWR BLD KIT Comments Service Kit 3 CW Blades & 6 CCW Blades Service Kit 3 CW Blades & 6 CCW Blades Revision 46 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

47 Belt Drive Left Hand Deck (S/N ) (continued) Section 4: Decks This Page Intentionally Left Blank 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 47

48 Table of Contents Belt Take-Up Handle Part Number Index Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

49 Table of Contents Belt Take-Up Handle Section 4: Decks Part Number Index Ref. Part No. Part Description Comments Revision dwg C C C H H C C S S Drawing Image Number NUT HEX 5/8-18 PLT WASHER LOCK SPRING 5/8 PLT FLAT IDLER PULLEY 6" PULLEY (6 3/4 O.D.) CW BELT TAKE-UP HANDLE CCW BELT TAKE-UP HANDLE HHCS 5/8-18X2 1/2 GR5 DOUBLE DISK ARM PIVOT BUSHINGS AFM BELT TAKE UP HANDLE CCW BELT TAKE-UP HANDLE Includes item 4; part no H. Includes item 4; part no H. 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 49

50 Table of Contents Channel Center Deck Part Number Index Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

51 Table of Contents Channel Center Deck Section 4: Decks Part Number Index Ref. Part No. Part Description Comments Revision dwg C C C C C D D C C C C C D C C C C C V C C C C C C C C C C H H H H H H D C C Drawing Image Number GBOX MOWER 50 HP 1:8 CCW RPBY C REP BY C RPBY C GEARBOX SHAFT PROTECTOR KEY 1/4" X 11/16" LONG GEAR BOX SPACER B-GROOVE PULLEY 11" CAST-IRON B-GROOVE DRIVE PULLEY 11 O.D. WASHER FLAT 1 SAE PLT ITG 1"-14 SLOTTED HEX NUT NUT M 24 X 2 PIN COTTER 3/16 X 1 3/4 PLT SMV MOUNT BAR SPRING STEEL SMV MOUNT BAR DECAL SLOW MOVING-GALV. BACKED NUT HEX FLANGE LOCK 1/4-20 PLT NUT SQ 1/4-20 PLT WASHER LOCK SPRING 1/4 PLT SCREW RD HD 1/4-20 X 5/8 SMV PACKAGE HFSS 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX 1/2-13 PLT WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-18 PLT WASHER FLAT 5/8 SAE PLT HHCS 5/8-18X1 3/4 GR5 200 CEN. GEAR BOX CHANNEL 200 CEN. GEAR BOX CHANNEL GREEN 200 CEN. GEAR BOX CHANNEL ORANGE 200 CEN. GEAR BOX CHANNEL RED 200 CEN. GEAR BOX CHANNEL BLUE CENTER GEAR BOX CHANNEL GEAR BOX CHANNEL SPACER HHCS 5/8-11X4 1/2 GR5 HHCS 1/4-20X1 GR5 (S/N ) (S/N to ) (S/N to ) (S/N ) (S/N ) (S/N ) (S/N ) Not required with lock nut Includes of items 10 through 14 (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) Rev. 4 Rev. 3 Rev. 2 Rev. 1 Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 51

52 Table of Contents Channel Left Deck Part Number Index Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

53 Table of Contents Channel Left Deck Section 4: Decks Part Number Index Ref. Part No. Part Description Comments Revision Dwg C C C C C D D C C C C D C D C C C C C C C C C C D C C C C H C C C C C H H H H H H C C C C C Drawing Image Number GEARBOX SHAFT PROTECTOR GBOX MOWER 50 HP 1:8 CW REP BY C REP BY C RPBY C KEY 1/4" X 11/16" LONG GEAR BOX SPACER B-GROOVE PULLEY 11" CAST-IRON B-GROOVE DRIVE PULLEY 11 O.D. WASHER FLAT 1 SAE PLT ITG 1"-14 SLOTTED HEX NUT NUT M 24 X 2 PIN COTTER 3/16 X 1 3/4 PLT FLEX ARM PIVOT PIN NUT HEX 1-8 NYLON INSERT PLT GEAR BOX CHANNEL SPACER HFSS 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1-8X3 GR8 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-18 PLT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT GW LINK MOUNT BRACKET HHCS 3/8-16X1 1/4 GR5 PIN DETENT 5/8 X 3 3/4 USE-LG SP EYE 1/2-13X3 FTHD SPRING EXT 1 13/32 X 6 EXT WING FLEX ARM AFM40200 BUSHING 1 1/2 X 1 1/4 X 1 1/2 NUT LOCK 1/4-20 PLT HHCS 1/4-20X2 1/2 GR5 HHCS 1/4-20X2 GR5 HHCS 5/8-18X1 3/4 GR5 200 WING GEAR BOX CHANNEL 200 WING GEAR BOX CHANNEL GREEN 200 WING GEAR BOX CHANNEL ORANGE 200 WING GEAR BOX CHANNEL RED 200 WING GEAR BOX CHANNEL BLUE WING GEAR BOX CHANNEL AFM200 HHCS 5/8-11X4 1/2 GR5 WASHER FLAT 5/8 SAE PLT NUT HEX WHIZ 1/2-13 PLT NUT HEX 1/2-13 PLT GREASE ZERK 1/4-28 THD FORMING (S/N ) (S/N to (S/N to ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) Rev. 4 Rev. 3 Rev. 2 Rev. 1 Rev. 2 Rev 1; Use up stock Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 Rev 1; Use up stock Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 53

54 Table of Contents Channel Right Hand Deck Part Number Index Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

55 Table of Contents Channel Right Hand Deck Section 4: Decks Part Number Index Ref. Part No. Part Description Comments Revision Dwg C C C C C D D C C C C C C C C D C C C C C C C C C C C D D D D D C C C C C D H H H H H H H C C C Drawing Image Number GBOX MOWER 50 HP 1:8 CCW RPBY C REP BY C RPBY C GEARBOX SHAFT PROTECTOR KEY 1/4" X 11/16" LONG GEAR BOX SPACER B-GROOVE PULLEY 11" CAST-IRON B-GROOVE DRIVE PULLEY 11 O.D. WASHER FLAT 1 SAE PLT ITG 1"-14 SLOTTED HEX NUT NUT M 24 X 2 PIN COTTER 3/16 X 1 3/4 PLT HHCS 1/4-20X2 1/2 GR5 HHCS 1/4-20X2 GR5 NUT LOCK 1/4-20 PLT NUT HEX 1-8 NYLON INSERT PLT GEAR BOX CHANNEL SPACER BUSHING 1 1/2 X 1 1/4 X 1 1/2 HFSS 1/2-13X1 1/2 GR5 HHCS 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT HHCS 1-8X3 GR8 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-18 PLT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT GW LINK MOUNT BRACKET GW LINK MOUNT BRACKET GREEN GW LINK MOUNT BRACKET ORANGE GW LINK MOUNT BRACKET RED GW LINK MOUNT BRACKET BLUE HHCS 3/8-16X1 1/4 GR5 PIN DETENT 5/8 X 3 3/4 USE-LG SP EYE 1/2-13X3 FTHD SPRING EXT 1 13/32 X 6 EXT HHCS 5/8-18X1 3/4 GR FLEX ARM PIVOT PIN WING FLEX ARM AFM WING GEAR BOX CHANNEL 200 WING GEAR BOX CHANNEL GREEN 200 WING GEAR BOX CHANNEL ORANGE 200 WING GEAR BOX CHANNEL RED 200 WING GEAR BOX CHANNEL BLUE WING GEAR BOX CHANNEL AFM200 HHCS 5/8-11X4 1/2 GR5 WASHER FLAT 5/8 SAE PLT GREASE ZERK 1/4-28 THD FORMING (S/N ) (S/N to ) (S/N to ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) (S/N ) Rev. 4 Rev. 3 Rev. 2 Rev. 1 Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 55

56 Deck and Roller Table of Contents Part Number Index Section 4: Decks AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

57 Section 4: Decks Deck and Roller Table of Contents Part Number Index Ref. Part No. Part Description Comments Revision dwg D D C C C C C C H H H H H H H H H H H H H H C C C D D C C C Drawing Image Number BELT GUARD DECK BELT GUARD KNOB 3/8-16 FEMALE THD 2 3/8OD KNOB 3 PRONG 1/4-20 X 1/2 LG CLIP U-TYPE NUT 1/4-20 SLF-RET NUT LOCK 1/2-13 PLT ROLLER ANTI-SCALP 2 OD HHCS 1/2-13X3 1/2 GR5 200 CEN. R.H. DECK WELD 200 CEN. R.H. DECK WELD GREEN 200 CEN. R.H. DECK WELD ORANGE 200 CEN. R.H. DECK WELD RED 200 CEN. R.H. DECK WELD BLUE AFM40200 CEN-R.H. DECK WELD 200 L.H. DECK WELD 200 L.H. DECK WELD GREEN 200 L.H. DECK WELD ORANGE 200 L.H. DECK WELD RED 200 L.H. DECK WELD BLUE AFM40200 L.H. DECK WELD FRONT ROLLER BRKT L.H. LOW LH FRONT ROLLER WELDMENT 4 X 5 1/2 FRONT ROLLER WASHER LOCK SPRING 3/8 PLT NUT HEX 3/8-16 PLT FRONT ROLLER MOUNT-R.H. LOW FRONT ROLLER RH BRACKET NUT LOCK 3/4-16 NYLOC COLLAR HHCS 3/8-16X1 GR5 NUT WING 3/8-16 PLT (S/N ) (S/N <->176349) (S/N ) (S/N <->176349) (S/N ) (S/N ) (S/N <->176349) (SN ) (S/N <->176349) (S/N ) (S/N ) (S/N ) (S/N ) Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 not compat. w/rev. Rev. 1 Rev. 2 Rev 1; Use up stock Rev. 2 Rev 1; Use up stock 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 57

58 Gauge Wheel Center Deck (S/N ) Section 5: Gauge Wheels AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

59 Gauge Wheel Center Deck (S/N ) Section 5: Gauge Wheels Ref. Part No. Part Description Comments Revision dwg D C C H H C S C H C C C C C C C C D D D C H C C C D D C C Drawing Image Number CEN DECK CARRIER ROD PIN ROLL 3/8 X 1 3/4 LG PLT U-BOLT 1/2-13 X 2 1/32 X 3 1/4 REAR DECK CARRIER LH AFM40200 REAR DECK CARRIER RH AFM40200 GAUGE WHEEL SFT PIVOT BUSHING 90" G W YOKE SUB ASSY HHCS 1/2-13X1 1/2 GR5 STAND-OFF CEN. DECK CARRIER WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT SPACER 1/2" GW SNAP ON SPACER - 1" THICK GW SNAP ON SPACER - 1/4" THICK GREASE ZERK STRAIGHT 1/4-28 WASHER FLAT 1/2 SAE PLT HHCS 1/2-13X1 1/2 GR5 GW SPACER 1/4" G.W. SPACER 1/2" G.W. SPACER 1" PIN LYNCH 1/4 X 1 3/4 PLT 90 GAUGE WHEEL YOKE HHCS 1/2-20X8 GR5 NUT HEX 1/2-20 PLT WASHER LOCK SPRING 1/2 PLT RPBY C SPACER TUBE-SH. G.W. REP BY C TIRE 13X (LITE FOAM) RIB Includes items 18 through 28 Optional foam filled tire 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 59

60 Gauge Wheel Left & Right Hand Deck (S/N ) Section 5: Gauge Wheels AFM4016 & AFM40200 (S/N ) All-Flex Mower P 08/10/17

61 Gauge Wheel Left & Right Hand Deck (S/N ) Section 5: Gauge Wheels Ref. Part No. Part Description Comments Revision dwg C S S C C S C C H C C D D D C H C C C D D C D D D H D H C Drawing Image Number HHCS 1/2-13X1 1/2 GR NON-CASTERED GW ASSY 90" G W YOKE SUB ASSY WASHER LOCK SPRING 1/2 PLT NUT HEX 1/2-13 PLT CASTERED GW ARM SUB GAUGE WHEEL SFT PIVOT BUSHING GREASE ZERK STRAIGHT 1/4-28 CASTERED GW ARM AFM40200 WASHER FLAT 1/2 SAE PLT HHCS 1/2-13X1 1/2 GR5 GW SPACER 1/4" G.W. SPACER 1/2" G.W. SPACER 1" PIN LYNCH 1/4 X 1 3/4 PLT 90 GAUGE WHEEL YOKE HHCS 1/2-20X8 GR5 NUT HEX 1/2-20 PLT WASHER LOCK SPRING 1/2 PLT RPBY C SPACER TUBE-SH. G.W. RPBY C 1 1/4 SQ BAR SPACER 1/4" LG 1 1/4 SQ BAR SPACER 1/2" LG 1 1/4 SQ BAR SPACER 1" LG NON-CASTER GW YOKE WELD 1 1/4 SQ BAR TOP CAP NONCASTERED GW ARM AFM40200 TIRE 13X (LITE FOAM) RIB Includes items 15, 17 through 21 & 23 through 28 Includes 7, 8 & 9 08/10/17 AFM4016 & AFM40200 (S/N ) All-Flex Mower P 61