Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description

Similar documents
HURRICANESHIELD IMPACT-RESISTANT GLASS SECTION DIRECTORY. Size and performance summary. Glazing performance. Grille profiles and patterns.

General Information SECTION DIRECTORY

Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description

SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS

Pella 250 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data

Pella 250 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data

Product Summary. Pella 250 Series Sliding Window SECTION DIRECTORY

HURRICANESHIELD IMPACT-RESISTANT GLASS SECTION DIRECTORY. Size and performance summary. Glazing performance. Grille profiles and patterns.

SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS

Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description

Pella 450 Series. Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data

Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description

Lifestyle Series Casement

Size and performance summary. Glazing performance. Grille profiles and patterns. Size tables. Design Data. Detailed Product Description

SECTION DIRECTORY. Designer Series DS-AW-1 AWNING

Pella Impervia 350 Series Vinyl Awning Windows and Sliding Patio Doors

Product Selection Guide Size and Performance Data...W-HG-2 Features and Options...W-HG-3 Combination Assemblies...W-HG-4 Glazing Performance...

Architect Series Traditional

SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS

SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS

SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS

General Information. Product Details SECTION DIRECTORY

Architect Series Designer Series Pella ProLine. Architect Series...AW-1 Designer Series...AW-2 Pella ProLine...AW-2

Architect Series Traditional

SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE COMBINATIONS GRILLE PROFILES AND PATTERNS CUSTOM SHAPES AND SIZES DETAILED PRODUCT DESCRIPTION

SECTION DIRECTORY. Designer Series W-OSD-1 OUT-SWING DOOR

SIZE AND PERFORMANCE SUMMARY GLAZING PERFORMANCE GRILLE PROFILES AND PATTERNS SIZE TABLES DESIGN DATA DETAILED PRODUCT DESCRIPTION CROSS SECTIONS

Smooth, clean lines for a higher quality look than ordinary vinyl. Exceptional energy efficiency with double- and triple-pane glass options

CHAPTER 3 INTEGRITY WOOD ULTREX DOUBLE HUNG

Specifications... Quick Spec Guide...

DF COLLECTION. Architectural Detail Guide Hybrid Awning Window DF 3113 TABLE OF CONTENTS

Architectural Manual. Vinyl Windows & Patio Doors

Sliding Patio Doors Builders Vinyl

SECTION DIRECTORY W-FW-1 FIXED WINDOW

Casement Windows Builders Clad-Wood

Natural beauty of wood with low-maintenance aluminum-clad exteriors. Unique, factory-assembled combinations without the custom price tag

DESIGN DATA - CURVED SHAPES Wood and Aluminum-Clad Exteriors

Elaine Sagers, Vice President Pella Corporation, January 18, 2016

TEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE C AWNING WINDOWS

Architect Series Traditional

Technical Guide B Casement Windows. Casement Windows. Technical Guide B1

BELVEDERE PROJECT TECHNICAL GUIDE ACCESS WINDOWS

Wood and Aluminum EnduraClad Exterior 6' 8" and 6' 10" Size Tables

Technical Guide C. CAwning Windows. Technical Guide C1

V3 Series Awning Windows (2011 to Present)

Sliding Windows Brickmould Vinyl

Guide Specification SECTION VINYL WINDOWS

ALUMINUM HORIZONTAL ROLLER WINDOW

Sliding Patio Doors Flat Casing Vinyl

DOUBLE/SINGLE HUNG WINDOWS

Single-Hung Windows Premium Atlantic Vinyl

The Falcon Series... Setting The Standard

Visions 2000 Double Hung Tilt Window Parts Reference Catalog

Architect Series Contemporary

Euroview Vinyl Tilt/Turn, Hopper & Picture Windows

81870 Alside_24667 Alside 11/3/16 5:01 PM Page 2 80 Series

Series A L L - E N V I R O N M E N T V I N Y L W I N D O W S S T R E N G T H P E R F O R M A N C E E F F I C I E N C Y

TEA2 Architects LAKE SUPERIOR RESIDENCE TECHNICAL GUIDE AWNING WINDOWS

Aluminum Series SH600 Product Specifications

Siteline EX Clad Casement Windows Premium Wood

Tuscany Series Montecito Series

Product Guide Specification

LUXURY SLIDING PATIO & SWINGING FRENCH DOORS

Product Guide Specification

Note: PGT reserves the right to change material design and/or construction without notice or liability Window Height

NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.

Gliding Windows Premium Vinyl

Casement Windows Premium Atlantic Vinyl

Sentinel Single Hung Window 110

Series A L L - E N V I R O N M E N T V I N Y L W I N D O W S S T R E N G T H P E R F O R M A N C E E F F I C I E N C Y

Architect Series Traditional

Durable, easy-care vinyl that will look great for years. Energy-efficient options that keep your home more comfortable

CONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL

NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.

Warranty, Parts & Install Info 1. Series 4600 Double Hung Windows 2. Series 4710 Casement Windows 3. Series 9000 Sliding Patio Door 4

SINGLE SLIDING WINDOW 1000 SERIES 4-1/2" FRAME SINGLE SLIDER LIFT OUT

Architect Series Traditional. ONE-WAY (PASSAGE-DOOR) Min-Frame- Width-(Inches) Max-Frame- Width-(Inches)

Intelligent Design. Superior Performance.

Technical Guide E. EDouble/Single Hung Windows. Technical Guide E1

AAMA/WDMA/CSA 101/I.S.2/A TEST REPORT. Rendered to: MASTER WINDOW SYSTEMS, INC.

StyleGuard. Impact-Resistant Windows and Doors Edition

3948 Townsfair Way, Suite 200 July 2013 Columbus, Ohio Toll Free Website

Single-Hung Tilt Windows Builders Vinyl

Double Hung. Power Lift 28,000 Constant Force

WA67 Folding System - Aluminum Clad Over Wood

Milgard Windows & Doors. Training Module Ultra and WoodClad Windows & Doors

NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C. SERIES/MODEL: SS 145.

NFRC U-FACTOR, SHGC / VT, CONDENSATION RESISTANCE COMPUTER SIMULATION REPORT. Rendered to: EARTHWISE GROUP, L.L.C.

VINYL WINDOWS & DOORS

your vision, our windows

Primed Casement Windows (1932 to 1989)

Visions 3000 Series 924 Parts Catalog

Primed Casement Windows (1932 to 1989)

Primed Epicr Radius and Geometric Windows - In-Sash Custom Wood

StyleGuard IMPACT- When the storm is at its worst, our performance is at its best. RESISTANT WINDOWS DOORS AND

Aluminum Wood Double-Hung Windows

French View Primed Hinged Patio Doors Premium Wood

6100 SERIES SINGLE HUNG

Replacement Door Bottom for Pease style doors MD /16 Beige 6 $13.20

SPECIAL SIZE FRAME DIMENSIONS New Construction Frame 2-11/16" Frame Depth East, West and Florida Regions

Transcription:

SECTIN DIRECTRY Size and performance summary Glazing performance Grille profiles and patterns Size tables Design Data Detailed Product Description Cross sections The information published in this document is believed to be accurate at the time of publication. However, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-1

BRAND SUMMARY Pella 250 Series Casement windows feature extruded, rigid PVC (polyvinyl chloride) frames and sash with heat-fused mitered corners for a fully welded corner assembly. Casement windows meet industry standards for water infiltration and wind resistance and meet ENERGY STAR guidelines with dual-pane or triplepane insulated glass. Standard performance window sash are available with optional foam insulation for increased thermal performance. BLCK FRAME DESIGN 3-1/4" Block Pocket Install 3-1/4" Block Pocket Install Frame allows a perfect fit into a 3-1/4" pocket when installed into an existing Double-Hung or Single-Hung wood frame from the interior. The block frames include interior and exterior accessory grooves. Custom sizes are available in 1/8" increments for a perfect fit. DUBLE-WALL FLUSH FLANGE Replacement Frame Design The flush flange frame allows for easy replacement of old aluminum or steel frame windows without removing the existing frame head or jambs typically used with stucco exteriors in southwest arid climates. The frame depth is 3-1/4" (overall wall depth of 3") includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. 3-1/4" Block Pocket Install NAIL FIN FRAME DESIGN With or Without Integrated J-Channel Continuous fin with welded corners adds a protective weather barrier and allows for hassle-free installation. The standard 3-1/4" frame depth includes interior and exterior accessory grooves. Nailing fin has a 1-1/8" setback from exterior face of window frame. Custom sizes are available in 1/8" increments for a perfect fit. 4-9/16" and 6-9/16" factory applied primed or clear jamb extensions are available. INTEGRAL FLANGE FRAME The integral flange frame can be used in new construction block or concrete walls. Commonly used in Florida and often referred to as "Florida Flange" frame. The frame depth is 3-1/4" (overall wall depth of 3") includes interior accessory groove. Custom sizes are available in 1/8" increments for a perfect fit. With J-Channel Without J-Channel Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-2

PRDUCT SELECTIN GUIDE Size and Performance Data Sound Transmission Class SIZES Standard Sizes S Special Sizes Available Built on 1/8" Increments FRAMES Nail Fin nly Nail Fin with J-Channel 3-1/4" Block Pocket Install/Replacement S Double-Wall Flush Flange Integral Flange PERFRMANCE 1 Standard Performance Meets or Exceeds AAMA/WDMA Ratings LC-PG35 Hallmark Certified Air Infiltration (cfm/ ft 2 of frame @ 1.57 psf wind pressure.) 0.10 Design Pressure 35 psf Water Penetration Resistance 7.5 psf Performance Upgrade Meets or Exceeds AAMA/WDMA Ratings LC-PG50 Hallmark Certified Air Infiltration (cfm/ ft 2 of frame @ 1.57 psf wind pressure.) 0.10 Design Pressure 50 psf Water Penetration Resistance 7.5 psf ther Performance Criteria Forced Entry Resistance (Minimum Security Grade) 2 10 Maximum perating Force (lbs) (Initiate Motion / Maintain Motion) 15/6 SUND TRANSMISSIN CLASS AND UTDR-INDR TRANSMISSIN CLASS Frame Size Tested 3 verall Glazing Thickness Exterior Thickness Glazing System Interior Thickness Third Pane Thickness STC Rating ITC Rating - DUAL PANE INSULATING GLASS Vent 23-1/2" x 59" 3/4" 3mm 3mm 30 25 Vent 23-1/2" x 59" 3/4" 3mm 5mm 34 28 Fixed 47-1/4" x 59" 3/4" 3mm 3mm 28 24 Fixed 47-1/4" x 59" 1" 3mm 5mm 31 25 TRIPLE-PANE INSULATING GLASS Vent 23-1/2" x 59" 1" 3mm 3mm 3mm 34 28 S = Standard; = ptional (1) Published performance data is for single unit only. See Design Data pages in this section for specific product performance class and grade values. (2) The higher the level, the greater the product's ability to resist forced entry. (3) ASTM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. The presence of low-e or argon have negligible effect on sound attenuation characteristics. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-3

PRDUCT SELECTIN GUIDE Features and ptions GLAZING (INSULATING GLASS) Glazing Type Dual-pane insulating glass Triple-pane insulating glass Insulated ptions / Low-E Types Advanced Low-E NaturalSun Low-E SunDefense Low-E 1 Bronze-tinted Advanced Low-E 1 Additional Glazing ptions Annealed glass Tempered glass bscure glass 2 Gas Fill / High Altitude Argon High altitude High altitude with argon 1 SASH Foam Insulation Performance Upgrade INTERIR / EXTERIR CLR White Interior/White Exterior Almond Interior/Almond Exterior Fossil Interior/Fossil Exterior White Interior/Brown Exterior White Interior/Fossil Exterior White Interior/Black Exterior White Interior/Brick Red Exterior White Interior/Hartford Green Exterior White Interior/Morning Sky Gray Exterior White Interior/Poplar White Exterior White Interior/Portobello Exterior White Interior/Tan Exterior S S S S S HARDWARE Color matched hardware SCREENS Conventional black fiberglass screens - flat GRILLES Grilles-Between-the- 3/4" Contour Flat 1" Contour Grille Patterns: Traditional, Prairie, Top Row, Custom - Equally Divided Simulated-Divided-Light Grilles 1 (without spacer) 7/8" contour profile Grille Patterns: Traditional, Prairie, Top Row, Custom - Equally Divided S S S = Standard; = ptional (1) Not available with triple-pane glazing. (2) Contact your local Pella sales representative for current offering. Rev. 05/08/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-4

GLAZING PERFRMANCE - TTAL UNIT Dual-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM GLASS N NC SC S 1 2 3 3/4" Advanced Low-E IG PEL-N-239-00002-00007 3 3 air 0.29 0.25 0.46 57 with SDL or grilles-between-the-glass PEL-N-239-00002-00008 0.29 0.23 0.42 57 3/4" Advanced Low-E IG PEL-N-239-00005-00007 3 3 argon 0.26 0.25 0.46 60 22 with SDL or grilles-between-the-glass PEL-N-239-00005-00008 0.26 0.23 0.42 60 21 3/4" NaturalSun Low-E IG PEL-N-239-00001-00007 3 3 air 0.30 0.43 0.52 56 27 with SDL or grilles-between-the-glass PEL-N-239-00001-00008 0.30 0.39 0.47 56 25 3/4" NaturalSun Low-E IG PEL-N-239-00004-00007 3 3 argon 0.27 0.43 0.52 59 31 with SDL or grilles-between-the-glass PEL-N-239-00004-00008 0.27 0.39 0.47 59 29 3/4" SunDefense Low-E IG PEL-N-239-00003-00007 3 3 air 0.29 0.19 0.43 57 with SDL or grilles-between-the-glass PEL-N-239-00003-00008 0.29 0.17 0.38 57 3/4" SunDefense Low-E IG PEL-N-239-00006-00007 3 3 argon 0.26 0.18 0.43 61 18 with SDL or grilles-between-the-glass PEL-N-239-00006-00008 0.26 0.17 0.38 61 17 VENT 3MM / 5MM GLASS 1" Advanced Low-E IG PEL-N-239-00024-00001 3 5 air 0.30 0.25 0.46 56 with SDL or grilles-between-the-glass PEL-N-239-00024-00002 0.30 0.23 0.41 56 1" Advanced Low-E IG PEL-N-239-00028-00001 3 5 argon 0.27 0.25 0.46 59 21 with SDL or grilles-between-the-glass PEL-N-239-00028-00002 0.27 0.22 0.41 59 19 1" NaturalSun Low-E IG PEL-N-239-00023-00001 3 5 air 0.30 0.43 0.52 55 27 with SDL or grilles-between-the-glass PEL-N-239-00023-00002 0.30 0.39 0.47 55 25 1" NaturalSun Low-E IG PEL-N-239-00027-00001 3 5 argon 0.27 0.43 0.52 59 31 with SDL or grilles-between-the-glass PEL-N-239-00027-00002 0.27 0.39 0.47 59 29 1" SunDefense Low-E IG PEL-N-239-00026-00001 3 5 air 0.29 0.19 0.42 56 with SDL or grilles-between-the-glass PEL-N-239-00026-00002 0.29 0.17 0.38 56 1" SunDefense Low-E IG PEL-N-239-00030-00001 3 5 argon 0.26 0.18 0.42 60 18 with SDL or grilles-between-the-glass PEL-N-239-00030-00002 0.26 0.17 0.38 60 17 R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-5

GLAZING PERFRMANCE - TTAL UNIT Dual-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM GLASS WITH FAM INSULATIN N NC SC S 1 2 3 3/4" Advanced Low-E IG PEL-N-239-00040-00007 3 3 air 0.28 0.25 0.46 57 19 with SDL or grilles-between-the-glass PEL-N-239-00040-00008 0.28 0.23 0.42 57 18 3/4" Advanced Low-E IG PEL-N-239-00043-00007 3 3 argon 0.26 0.25 0.46 61 22 with SDL or grilles-between-the-glass PEL-N-239-00043-00008 0.26 0.23 0.42 61 21 3/4" NaturalSun Low-E IG PEL-N-239-00039-00007 3 3 air 0.29 0.43 0.52 56 29 with SDL or grilles-between-the-glass PEL-N-239-00039-00008 0.29 0.39 0.47 56 26 3/4" NaturalSun Low-E IG PEL-N-239-00042-00007 3 3 argon 0.26 0.43 0.52 60 32 with SDL or grilles-between-the-glass PEL-N-239-00042-00008 0.26 0.39 0.47 60 30 3/4" SunDefense Low-E IG PEL-N-239-00041-00007 3 3 air 0.28 0.19 0.43 57 16 with SDL or grilles-between-the-glass PEL-N-239-00041-00008 0.28 0.17 0.38 57 3/4" SunDefense Low-E IG PEL-N-239-00044-00007 3 3 argon 0.25 0.18 0.43 61 19 with SDL or grilles-between-the-glass PEL-N-239-00044-00008 0.25 0.17 0.38 61 19 VENT- 3MM / 5MM GLASS WITH FAM INSULATIN 1" Advanced Low-E IG PEL-N-239-00062-00001 3 5 air 0.29 0.25 0.46 56 with SDL or grilles-between-the-glass PEL-N-239-00062-00002 0.29 0.23 0.41 56 1" Advanced Low-E IG PEL-N-239-00066-00001 3 5 argon 0.26 0.25 0.46 60 22 with SDL or grilles-between-the-glass PEL-N-239-00066-00002 0.26 0.22 0.41 60 20 1" NaturalSun Low-E IG PEL-N-239-00061-00001 3 5 air 0.30 0.43 0.52 56 27 with SDL or grilles-between-the-glass PEL-N-239-00061-00002 0.30 0.39 0.47 56 25 1" NaturalSun Low-E IG PEL-N-239-00065-00001 3 5 argon 0.27 0.43 0.52 59 31 with SDL or grilles-between-the-glass PEL-N-239-00065-00002 0.27 0.39 0.47 59 29 1" SunDefense Low-E IG PEL-N-239-00064-00001 3 5 air 0.29 0.19 0.42 57 with SDL or grilles-between-the-glass PEL-N-239-00064-00002 0.29 0.17 0.38 57 1" SunDefense Low-E IG PEL-N-239-00068-00001 3 5 argon 0.26 0.18 0.42 60 18 with SDL or grilles-between-the-glass PEL-N-239-00068-00002 0.26 0.17 0.38 60 17 R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-6

GLAZING PERFRMANCE - TTAL UNIT Triple-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Middle Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM GLASS N NC SC S 1 2 3 1" Advanced Low-E Triple-pane IG PEL-N-239-00033-00003 3 3 3 air 0.24 0.21 0.36 64 22 with Grilles-between-the-glass PEL-N-239-00034-00002 0.24 0.19 0.32 64 21 1" Advanced Low-E Triple-pane IG PEL-N-239-00037-00003 3 3 3 argon 0.21 0.21 0.36 67 26 with Grilles-between-the-glass PEL-N-239-00076-00002 0.20 0.19 0.32 68 26 1" NaturalSun Low-E Triple-pane IG PEL-N-239-00031-00003 3 3 3 air 0.24 0.37 0.46 63 31 with Grilles-between-the-glass PEL-N-239-00032-00002 0.24 0.34 0.41 63 30 1" NaturalSun Low-E Triple-pane IG PEL-N-239-00035-00003 3 3 3 argon 0.21 0.37 0.46 67 35 with Grilles-between-the-glass PEL-N-239-00036-00002 0.21 0.34 0.41 67 33 VENT 3MM GLASS WITH FAM INSULATIN 1" Advanced Low-E Triple-pane IG PEL-N-239-00071-00003 3 3 3 air 0.23 0.21 0.36 64 23 with Grilles-between-the-glass PEL-N-239-00072-00002 0.23 0.19 0.32 64 22 1" Advanced Low-E Triple-pane IG PEL-N-239-00075-00003 3 3 3 argon 0.20 0.21 0.36 68 27 with Grilles-between-the-glass PEL-N-239-00038-00002 0.21 0.19 0.32 67 25 1" NaturalSun Low-E Triple-pane IG PEL-N-239-00069-00003 3 3 3 air 0.23 0.37 0.46 64 33 with Grilles-between-the-glass PEL-N-239-00070-00002 0.24 0.34 0.41 64 30 1" NaturalSun Low-E Triple-pane IG PEL-N-239-00073-00003 3 3 3 argon 0.20 0.37 0.46 67 36 with Grilles-between-the-glass PEL-N-239-00074-00002 0.21 0.34 0.41 67 33 R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-7

GLAZING PERFRMANCE - TTAL UNIT Tinted Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone VENT 3MM / 5MM GLASS TINTED GLAZING N NC SC S 1 2 3 1" Bronze Advanced Low-E IG PEL-N-239-00025-00001 3 5 air 0.30 0.24 0.34 56 with SDL or grilles-between-the-glass PEL-N-239-00025-00002 0.30 0.22 0.31 56 1" Bronze Advanced Low-E IG PEL-N-239-00029-00001 3 5 argon 0.27 0.24 0.34 60 20 with SDL or grilles-between-the-glass PEL-N-239-00029-00002 0.27 0.22 0.31 60 19 VENT 5MM GLASS TINTED GLAZING 1" Bronze Advanced Low-E IG PEL-N-239-00011-00001 5 5 air 0.31 0.23 0.30 53 with SDL or grilles-between-the-glass PEL-N-239-00012-00001 0.32 0.21 0.27 53 1" Bronze Advanced Low-E IG PEL-N-239-00019-00001 5 5 argon 0.27 0.22 0.30 57 19 with SDL or grilles-between-the-glass PEL-N-239-00020-00001 0.28 0.20 0.27 57 17 VENT 3MM / 5MM GLASS TINTED GLAZING WITH FAM INSULATIN 1" Bronze Advanced Low-E IG PEL-N-239-00063-00001 3 5 air 0.29 0.24 0.34 57 with SDL or grilles-between-the-glass PEL-N-239-00063-00002 0.29 0.22 0.31 57 1" Bronze Advanced Low-E IG PEL-N-239-00067-00001 3 5 argon 0.26 0.24 0.34 60 21 with SDL or grilles-between-the-glass PEL-N-239-00067-00002 0.26 0.22 0.31 60 20 VENT 5MM GLASS TINTED GLAZING WITH FAM INSULATIN 1" Bronze Advanced Low-E IG PEL-N-239-00049-00001 5 5 air 0.30 0.23 0.30 54 with SDL or grilles-between-the-glass PEL-N-239-00050-00001 0.31 0.21 0.27 54 1" Bronze Advanced Low-E IG PEL-N-239-00057-00001 5 5 argon 0.27 0.22 0.30 58 19 with SDL or grilles-between-the-glass PEL-N-239-00058-00001 0.28 0.20 0.27 58 17 R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-8

GLAZING PERFRMANCE - TTAL UNIT Dual-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED 3MM GLASS N NC SC S 1 2 3 3/4" Advanced Low-E IG PEL-N-240-00002-00001 3 3 air 0.30 0.30 0.57 57 with SDL or grilles-between-the-glass PEL-N-240-00002-00002 0.30 0.27 0.51 57 3/4" Advanced Low-E IG PEL-N-240-00005-00001 3 3 argon 0.27 0.30 0.57 61 24 with SDL or grilles-between-the-glass PEL-N-240-00005-00002 0.27 0.27 0.51 61 22 3/4" NaturalSun Low-E IG PEL-N-240-00001-00001 3 3 air 0.31 0.53 0.64 57 32 with SDL or grilles-between-the-glass PEL-N-240-00001-00002 0.31 0.47 0.57 57 28 3/4" NaturalSun Low-E IG PEL-N-240-00004-00001 3 3 argon 0.28 0.53 0.64 60 36 with SDL or grilles-between-the-glass PEL-N-240-00004-00002 0.28 0.47 0.57 60 32 3/4" SunDefense Low-E IG PEL-N-240-00003-00001 3 3 air 0.30 0.23 0.52 58 with SDL or grilles-between-the-glass PEL-N-240-00003-00002 0.30 0.21 0.47 58 3/4" SunDefense Low-E IG PEL-N-240-00006-00001 3 3 argon 0.26 0.22 0.52 61 20 with SDL or grilles-between-the-glass PEL-N-240-00006-00002 0.26 0.20 0.47 61 19 FIXED 5MM GLASS 1" Advanced Low-E IG PEL-N-240-00024-00001 5 5 air 0.30 0.30 0.56 58 with SDL or grilles-between-the-glass PEL-N-240-00024-00002 0.30 0.27 0.50 58 1" Advanced Low-E IG PEL-N-240-00028-00001 5 5 argon 0.27 0.29 0.56 62 23 with SDL or grilles-between-the-glass PEL-N-240-00028-00001 0.27 0.27 0.50 62 22 1" NaturalSun Low-E IG PEL-N-240-00023-00001 5 5 air 0.31 0.50 0.63 58 30 with SDL or grilles-between-the-glass PEL-N-240-00023-00002 0.31 0.45 0.56 58 27 1" NaturalSun Low-E IG PEL-N-240-00027-00001 5 5 argon 0.27 0.50 0.63 61 35 with SDL or grilles-between-the-glass PEL-N-240-00027-00002 0.27 0.45 0.56 61 32 1" SunDefense Low-E IG PEL-N-240-00026-00001 5 5 air 0.30 0.23 0.52 59 with SDL or grilles-between-the-glass PEL-N-240-00026-00002 0.30 0.21 0.46 59 1" SunDefense Low-E IG PEL-N-240-00030-00001 5 5 argon 0.26 0.22 0.52 62 20 with SDL or grilles-between-the-glass PEL-N-240-00030-00002 0.26 0.20 0.46 62 19 FIXED 3MM / 5MM GLASS 1" Advanced Low-E IG PEL-N-240-00032-00001 3 5 air 0.30 0.30 0.56 59 with SDL or grilles-between-the-glass PEL-N-240-00032-00002 0.30 0.27 0.50 59 1" Advanced Low-E IG PEL-N-240-00036-00001 3 5 argon 0.27 0.30 0.56 62 24 with SDL or grilles-between-the-glass PEL-N-240-00036-00002 0.27 0.27 0.50 62 22 1" NaturalSun Low-E IG PEL-N-240-00031-00001 3 5 air 0.31 0.52 0.64 58 31 with SDL or grilles-between-the-glass PEL-N-240-00031-00002 0.31 0.47 0.57 58 28 1" NaturalSun Low-E IG PEL-N-240-00035-00001 3 5 argon 0.28 0.52 0.64 61 35 with SDL or grilles-between-the-glass PEL-N-240-00035-00002 0.28 0.47 0.57 61 32 1" SunDefense Low-E IG PEL-N-240-00034-00001 3 5 air 0.30 0.22 0.52 59 with SDL or grilles-between-the-glass PEL-N-240-00034-00002 0.30 0.20 0.46 59 1" SunDefense Low-E IG PEL-N-240-00038-00001 3 5 argon 0.26 0.22 0.52 63 20 with SDL or grilles-between-the-glass PEL-N-240-00038-00002 0.26 0.20 0.46 63 19 R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-9

GLAZING PERFRMANCE - TTAL UNIT Triple-Pane Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Mid. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED - 3MM GLASS TINTED GLAZING N NC SC S 1 2 3 1" Advanced Low-E Triple-pane IG PEL-N-240-00041-00003 3 3 3 air 0.23 0.26 0.44 67 26 with Grilles-between-the-glass PEL-N-240-00041-00004 0.23 0.23 0.40 67 24 1" Advanced Low-E Triple-pane IG PEL-N-240-00045-00003 3 3 3 argon 0.19 0.26 0.44 71 31 with Grilles-between-the-glass PEL-N-240-00045-00004 0.20 0.23 0.40 71 28 1" NaturalSun Low-E Triple-pane IG PEL-N-240-00039-00003 3 3 3 air 0.24 0.45 0.57 66 36 with Grilles-between-the-glass PEL-N-240-00039-00004 0.24 0.41 0.51 66 34 1" NaturalSun Low-E Triple-pane IG PEL-N-240-00043-00003 3 3 3 argon 0.20 0.45 0.57 70 41 with Grilles-between-the-glass PEL-N-240-00043-00004 0.20 0.41 0.51 70 39 R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-10

GLAZING PERFRMANCE - TTAL UNIT Tinted Insulating Thickness Type of Glazing NFRC Certified Product # (mm) Ext. Int. Gap Fill U-Factor Performance Values 1 SHGC VLT CR Shaded Areas Meet ENERGY STAR Performance Criteria in Zones Shown U. S. Canada 2 Zone ER Zone FIXED - WITH 5MM GLASS TINTED GLAZING N NC SC S 1 2 3 1" Bronze Advanced Low-E IG PEL-N-240-00025-00001 5 5 air 0.30 0.27 0.36 58 with SDL or grilles-between-the-glass PEL-N-240-00025-00002 0.30 0.24 0.33 58 1" Bronze Advanced Low-E IG PEL-N-240-00029-00001 5 5 argon 0.27 0.27 0.36 62 22 with SDL or grilles-between-the-glass PEL-N-240-00029-00002 0.27 0.24 0.33 62 20 FIXED - 3MM / 5MM GLASS TINTED GLAZING 1" Bronze Advanced Low-E IG PEL-N-240-00033-00001 3 5 air 0.30 0.30 0.42 59 with SDL or grilles-between-the-glass PEL-N-240-00033-00002 0.30 0.27 0.37 59 1" Bronze Advanced Low-E IG PEL-N-240-00037-00001 3 5 argon 0.27 0.30 0.42 63 24 with SDL or grilles-between-the-glass PEL-N-240-00037-00002 0.27 0.27 0.37 63 22 R-Value = 1/U-Factor SHGC = Solar Heat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY STAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY STAR 2015 initiative. Based on unit size, some products will use 2.5mm glass that may have improved glazing performance from what is shown. See the Product Performance section for more detailed information or visit www.energystar.gov for Energy Star guidelines. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-11

GRILLE TYPES Grille Profiles GRILLES-BETWEEN-THE-GLASS SIMULATED-DIVIDED-LIGHT GRILLES WITHUT SPACER 3/4" 1" 3/4" 7/8" Flat Grille 3/4" Contour 1" Contour 3/4" Contour - Triple 7/8" Contour Grille Patterns PRAIRIE LITE PATTERNS Prairie - Approximately 4" from edge of sash to center of bar - Minimum actual glass is 13" 9-Lite Prairie THER AVAILABLE PATTERNS Traditional - Specify number of lites. - Grilles must be equally divided on visible glass. - Minimum 6" x 6". Traditional Top Row Custom Equally Divided Top Row - Standard visible glass to separator bar = 14" or half of total visible glass height, whichever is smaller. For traditional patterns, see size tables. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-12

SPECIAL SIZE FRAME DIMENSINS Miscellaneous Formulas 1-WIDE VENT UNIT 1-WIDE FIXED UNIT MINIMUM 14-1/2" W x 17-1/2" H (368 x 445) MAXIMUM 35-1/2" W x 71-1/2" H (889 x 1 803) MINIMUM 14-1/2" W x 14-1/2" H (368 x 368) MAXIMUM 71-1/2" W x 71-1/2" H (1 803 x 1 803) 36 sq. ft. Max. General Notes: To convert areas to square meters (m 2 ), multiply square feet by 0.0929. Rough pening = Frame Dimension + 1/2". Unit Height must be > Unit Width Keep frame di men sions to the near est 1/8" increment. Tempered glass must measure 18-1/2" diagonally. If glass width to height ratio is > 5 to 1, then unit must be tempered. Miscellaneous Formulas VISIBLE GLASS ACTUAL GLASS 1-WIDE VENT VGW = FW 6.188" VGH = FH 6.188" AGW = FW 5-7/8" AGH = FH 5-7/8" KEY: AGW = Actual Width AGH = Actual Height FW = Frame Width FH = Frame Height VGW = Visible Width VGH = Visible Height CW = Clear opening width CH = Clear opening height Clear pening Formulas 1-WIDE VENT VENT AREA VA = (CH X CW) / 144 CH CH = FH - 5.124" CW Standard Performance CW = FW - 11.631" Side Pivot CW = FW - 7.443" CLEAR PENING WIDTH w/ standard hardware CLEAR PENING WIDTH w/ side pivot hardware CLEAR PENING HEIGHT VENT AREA Shaded portion shows vent area with window open 90. Side pivot hardware only available on frame widths of 28" to 32" The clear opening formulas do not apply to units with FW < 16.25 Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-13

SIZE TABLES Vent Units (381) (368) (457) (610) (711) (762) (813) (445) (597) (699) (749) (800) (914) (902) pening Frame 1' 3" 14 1/ 2" 1' 6" 17 1/ 2" 2' 0" 23 1/ 2" 2' 4" 27 1/ 2" 2' 6" 29 1/ 2" 2' 8" 31 1/ 2" 3' 0" 35 1/ 2" (457) (445) (610) (597) (711) (699) (762) (749) (813) (800) (914) (902) 1' 6" 2' 0" 2' 4" 2' 6" 2' 8" 3' 0" 1/ 2" 1 / 2" 17 1 / 2" 23 1 / 2" 27 1 / 2" 29 1 / 2" 31 35 1-3/1-6 1-6/1-6 1-3/2-0 1-6/2-0 2-0/2-0 1-3/2-4 1-6/2-4 2-0/2-4 2-4/2-4 1-3/2-6 1-6/2-6 2-0/2-6 2-4/2-6 2-6/2-6 1-3/2-8 1-6/2-8 2-0/2-8 2-4/2-8 2-6/2-8 2-8/2-8 1-3/3-0 1-6/3-0 2-0/3-0 2-4/3-0 2-6/3-0 2-8/3-0 3-0/3-0 E3 E 1 (1 067) (1 054) (1 118) (1 105) (1 219) (1 207) (1 372) (1 359) (1 524) (1 511) (1 676) (1 664) (1 829) (1 816) 3' 6" 3' 8" 4' 0" 4' 6" 5' 0" 5' 6" 6' 0" 1/ 2" 1 / 2" 41 1 / 2" 43 1 / 2" 47 1 / 2" 53 59 1 / 2" 65 1/ 2 " 71 E3 1-3/3-6 1-6/3-6 2-0/3-6 2-4/3-6 2-6/3-6 2-8/3-6 3-0/3-6 1-3/3-8 1-6/3-8 2-0/3-8 2-4/3-8 2-6/3-8 2-8/3-8 3-0/3-8 1-3/4-0 1-6/4-0 2-0/4-0 2-4/4-0 2-6/4-0 2-8/4-0 3-0/4-0 T 1-3/4-6 1-6/4-6 2-0/4-6 2-4/4-6 2-6/4-6 2-8/4-6 3-0/4-6 T 1-3/5-0 1-6/5-0 2-0/5-0 2-4/5-0 2-6/5-0 2-8/5-0 3-0/5-0 T 1-3/5-6 1-6/5-6 2-0/5-6 2-4/5-6 2-6/5-6 2-8/5-6 3-0/5-6 E E E E E E Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E3 = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. T T 1-3/6-0 1-6/6-0 2-0/6-0 2-4/6-0 2-6/6-0 2-8/6-0 3-0/6-0 E Not to scale. Certain glass aspect ratios may require tempered glass. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-14

SIZE TABLES Fixed Units (381) (368) (457) (445) (610) (711) (762) (813) (597) (699) (749) (800) (914) (902) (1 219) (1 207) (1 372) (1 359) (1 524) (1 511) (1 829) (1 816) pening Frame 1' 3" 14 1/ 2" 1' 6" 17 1/ 2" 2' 0" 2' 4" 23 1 / 2" 27 1/ 2 " 2' 6" 29 1/ 2" 2' 8" 31 1/ 2" 35 3' 0" 1/ 2" 4' 0" 47 1/ 2" 4' 6" 53 5' 0" 59 1/ 2" 1/ 2" 2 6' 0" 71 1/ 2" (381) (368) (457) (445) (711) (610) (699) (597) (762) (749) (813) (800) (914) (902) (1 067) (1 054) (1 118) (1 105) 1' 3" 1' 6" 2' 0" 2' 4" 2' 6" 2' 8" 3' 0" 3' 6" 3' 8" 1 / 2" 41 1 / 2 " 35 1 / 2 " 31 1 / 2 " 29 1 / 2 " 27 1 / 2 " 23 1 / 2 " 17 1 / 2 " 14 1/ 2 " 43 1-3/1-3 1-6/1-3 2-0/1-3 2-4/1-3 2-6/1-3 2-8/1-3 3-0/1-3 1-3/1-6 1-6/1-6 2-0/1-6 2-4/1-6 2-6/1-6 2-8/1-6 3-0/1-6 1-3/2-0 1-6/2-0 2-0/2-0 2-4/2-0 2-6/2-0 2-8/2-0 3-0/2-0 1-3/2-4 1-6/2-4 2-0/2-4 2-4/2-4 2-6/2-4 2-8/2-4 3-0/2-4 1-3/2-6 1-6/2-6 2-0/2-6 2-4/2-6 2-6/2-6 2-8/2-6 3-0/2-6 1-3/2-8 1-6/2-8 2-0/2-8 2-4/2-8 2-6/2-8 2-8/2-8 3-0/2-8 1-3/3-0 1-6/3-0 2-0/3-0 2-4/3-0 2-6/3-0 2-8/3-0 3-0/3-0 1-3/3-6 1-6/3-6 2-0/3-6 2-4/3-6 2-6/3-6 2-8/3-6 3-0/3-6 4-0/1-3 4-0/1-6 4-0/2-0 4-0/2-4 4-0/2-6 4-0/2-8 4-0/3-0 4-0/3-6 4-6/1-3 4-6/1-6 4-6/2-0 4-6/2-4 4-6/2-6 4-6/2-8 4-6/3-0 4-6/3-6 5-0/1-3 5-0/1-6 5-0/2-0 5-0/2-4 5-0/2-6 5-0/2-8 5-0/3-0 5-0/3-6 T 6-0/1-3 6-0/1-6 6-0/2-0 6-0/2-4 6-0/2-6 6-0/2-8 6-0/3-0 6-0/3-6 T T 1-3/3-8 1-6/3-8 2-0/3-8 2-4/3-8 2-6/3-8 2-8/3-8 3-0/3-8 4-0/3-8 4-6/3-8 5-0/3-8 6-0/3-8 (1 219) (1 207) (1 372) (1 359) (1 524) (1 511) (1 676) (1 664) (1 829) (1 816) 6' 0" 5' 6" 5' 0" 4' 6" 4' 0" 1 / 2" 53 1/ 2" 47 1/ 2" 71 1 / 2" 65 1/ 2" 59 1-3/4-0 1-6/4-0 2-0/4-0 2-4/4-0 2-6/4-0 2-8/4-0 3-0/4-0 1-3/4-6 1-6/4-6 2-0/4-6 2-4/4-6 2-6/4-6 2-8/4-6 3-0/4-6 T 1-3/5-0 1-6/5-0 2-0/5-0 2-4/5-0 2-6/5-0 2-8/5-0 3-0/5-0 T 1-3/5-6 1-6/5-6 2-0/5-6 2-4/5-6 2-6/5-6 2-8/5-6 3-0/5-6 4-0/4-0 4-0/4-6 4-0/5-0 4-0/5-6 4-6/4-0 4-6/4-6 4-6/5-0 4-6/5-6 5-0/4-0 5-0/4-6 5-0/5-0 5-0/5-6 6-0/4-0 6-0/4-6 6-0/5-0 6-0/5-6 T T 1-3/6-0 1-6/6-0 2-0/6-0 2-4/6-0 2-6/6-0 2-8/6-0 3-0/6-0 4-0/6-0 4-6/6-0 5-0/6-0 6-0/6-0 Not to scale. Certain glass aspect ratios may require tempered glass. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-15

DESIGN DATA VENT AND FIXED UNITS Unit Egress Frame (Inches) Clear pening (Inches) (Vent Units nly) Vent Area Ft 2 Visible Ft 2 Standard Thickness (mm) Performance Class & Grade 1 Width Height Width Height Ft 2 Annealed Tempered Vent Fixed 1-3/1-3 14-1/2 14-1/2 0.5 3 3 LC35 1-3/1-6 14-1/2 17-1/2 2-7/8 12-3/8 0.2 0.6 0.7 3 3 LC35/LC50 LC35 1-3/2-0 14-1/2 23-1/2 2-7/8 18-3/8 0.4 0.9 1.0 3 3 LC35/LC50 LC35 1-3/2-4 14-1/2 27-1/2 2-7/8 22-3/8 0.4 1.1 1.2 3 3 LC35/LC50 LC35 1-3/2-6 14-1/2 29-1/2 2-7/8 24-3/8 0.5 1.2 1.3 3 3 LC35/LC50 LC35 1-3/2-8 14-1/2 31-1/2 2-7/8 26-3/8 0.5 1.3 1.5 3 3 LC35/LC50 LC35 1-3/3-0 14-1/2 35-1/2 2-7/8 30-3/8 0.6 1.5 1.7 3 3 LC35/LC50 LC35 1-3/3-6 14-1/2 41-1/2 2-7/8 36-3/8 0.7 1.7 2.0 3 3 LC35/LC50 LC35 1-3/3-8 14-1/2 43-1/2 2-7/8 38-3/8 0.8 1.8 2.2 3 3 LC35/LC50 LC35 1-3/4-0 14-1/2 47-1/2 2-7/8 42-3/8 0.8 2.0 2.4 3 3 LC35/LC50 LC35 1-3/4-6 14-1/2 53-1/2 2-7/8 48-3/8 1.0 2.3 2.7 3 LC35/LC50 LC35 1-3/5-0 14-1/2 59-1/2 2-7/8 54-3/8 1.1 2.6 3.1 3 LC35/LC50 LC35 1-3/5-6 14-1/2 65-1/2 2-7/8 60-3/8 1.2 2.9 3.4 3 LC35/LC50 LC35 1-3/6-0 14-1/2 71-1/2 2-7/8 66-3/8 1.3 3.2 3.8 3 LC35/LC50 LC35 1-6/1-3 17-1/2 14-1/2 0.7 3 3 LC35 1-6/1-6 17-1/2 17-1/2 5-7/8 12-3/8 0.5 0.9 0.9 3 3 LC35/LC50 LC35 1-6/2-0 17-1/2 23-1/2 5-7/8 18-3/8 0.7 1.3 1.4 3 3 LC35/LC50 LC35 1-6/2-4 17-1/2 27-1/2 5-7/8 22-3/8 0.9 1.5 1.7 3 3 LC35/LC50 LC35 1-6/2-6 17-1/2 29-1/2 5-7/8 24-3/8 1.0 1.7 1.8 3 3 LC35/LC50 LC35 1-6/2-8 17-1/2 31-1/2 5-7/8 26-3/8 1.1 1.8 2.0 3 3 LC35/LC50 LC35 1-6/3-0 17-1/2 35-1/2 5-7/8 30-3/8 1.2 2.1 2.3 3 3 LC35/LC50 LC35 1-6/3-6 17-1/2 41-1/2 5-7/8 36-3/8 1.5 2.5 2.8 3 3 LC35/LC50 LC35 1-6/3-8 17-1/2 43-1/2 5-7/8 38-3/8 1.6 2.6 2.9 3 3 LC35/LC50 LC35 1-6/4-0 17-1/2 47-1/2 5-7/8 42-3/8 1.7 2.9 3.2 3 3 LC35/LC50 LC35 1-6/4-6 17-1/2 53-1/2 5-7/8 48-3/8 2.0 3.3 3.7 3 3 LC35/LC50 LC35 1-6/5-0 17-1/2 59-1/2 5-7/8 54-3/8 2.2 3.7 4.2 3 3 LC35/LC50 LC35 1-6/5-6 17-1/2 65-1/2 5-7/8 60-3/8 2.5 4.2 4.7 3 3 LC35/LC50 LC35 1-6/6-0 17-1/2 71-1/2 5-7/8 66-3/8 2.7 4.6 5.1 3 LC35/LC50 LC35 2-0/1-3 23-1/2 14-1/2 1.0 3 3 LC35 2-0/1-6 23-1/2 17-1/2 1.4 3 3 LC35 2-0/2-0 23-1/2 23-1/2 11-7/8 18-3/8 1.5 2.0 2.1 3 3 LC35/LC50 LC35 2-0/2-4 23-1/2 27-1/2 11-7/8 22-3/8 1.8 2.5 2.6 3 3 LC35/LC50 LC35 2-0/2-6 23-1/2 29-1/2 11-7/8 24-3/8 2.0 2.7 2.8 3 3 LC35/LC50 LC35 2-0/2-8 23-1/2 31-1/2 11-7/8 26-3/8 2.2 2.9 3.0 3 3 LC35/LC50 LC35 2-0/3-0 23-1/2 35-1/2 11-7/8 30-3/8 2.5 3.4 3.5 3 3 LC35/LC50 LC35 2-0/3-6 23-1/2 41-1/2 11-7/8 36-3/8 3.0 4.0 4.2 3 3 LC35/LC50 LC35 2-0/3-8 23-1/2 43-1/2 11-7/8 38-3/8 3.2 4.2 4.5 3 3 LC35/LC50 LC35 2-0/4-0 23-1/2 47-1/2 11-7/8 42-3/8 3.5 4.7 5.0 3 3 LC35/LC50 LC35 2-0/4-6 23-1/2 53-1/2 11-7/8 48-3/8 4.0 5.3 5.7 3 3 LC35/LC50 LC35 2-0/5-0 23-1/2 59-1/2 11-7/8 54-3/8 4.5 6.0 6.4 3 3 LC35/LC50 LC35 2-0/5-6 23-1/2 65-1/2 11-7/8 60-3/8 5.0 6.7 7.1 3 3 LC35/LC50 LC35 2-0/6-0 23-1/2 71-1/2 11-7/8 66-3/8 5.5 7.3 7.9 3 3 LC35/LC50 LC35 1 of 3 (1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires performnace upgrade. Certain glass aspect ratios may require tempered glass. Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-16

DESIGN DATA VENT AND FIXED UNITS Unit Egress Frame (Inches) Clear pening (Inches) (Vent Units nly) Vent Area Ft 2 Visible Ft 2 Standard Thickness (mm) Performance Class & Grade 1 Width Height Width Height Ft 2 Annealed Tempered Vent Fixed 2-4/1-3 27-1/2 14-1/2 1.2 3 3 LC35 2-4/1-6 27-1/2 17-1/2 1.7 3 3 LC35 2-4/2-0 27-1/2 23-1/2 2.6 3 3 LC35 2-4/2-4 27-1/2 27-1/2 15-7/8 22-3/8 2.5 3.1 3.2 3 3 LC35/LC50 LC35 2-4/2-6 27-1/2 29-1/2 15-7/8 24-3/8 2.7 3.4 3.5 3 3 LC35/LC50 LC35 2-4/2-8 27-1/2 31-1/2 15-7/8 26-3/8 2.9 3.6 3.7 3 3 LC35/LC50 LC35 2-4/3-0 27-1/2 35-1/2 15-7/8 30-3/8 3.3 4.2 4.3 3 3 LC35/LC50 LC35 2-4/3-6 27-1/2 41-1/2 15-7/8 36-3/8 4.0 5.0 5.2 3 3 LC35/LC50 LC35 2-4/3-8 27-1/2 43-1/2 15-7/8 38-3/8 4.2 5.3 5.5 3 3 LC35/LC50 LC35 2-4/4-0 27-1/2 47-1/2 15-7/8 42-3/8 4.7 5.9 6.1 3 3 LC35/LC50 LC35 2-4/4-6 27-1/2 53-1/2 15-7/8 48-3/8 5.3 6.7 7.0 3 3 LC35/LC50 LC35 2-4/5-0 27-1/2 59-1/2 15-7/8 54-3/8 6.0 7.5 7.9 3 3 LC35/LC50 LC35 2-4/5-6 27-1/2 65-1/2 15-7/8 60-3/8 6.7 8.3 8.8 3 3 LC35/LC50 LC35 2-4/6-0 27-1/2 71-1/2 15-7/8 66-3/8 7.3 9.2 9.7 3 3 LC35/LC50 LC35 2-6/1-3 29-1/2 14-1/2 1.3 3 3 LC35 2-6/1-6 29-1/2 17-1/2 1.8 3 3 LC35 2-6/2-0 29-1/2 23-1/2 2.8 3 3 LC35 2-6/2-4 29-1/2 27-1/2 3.5 3 3 LC35 2-6/2-6 29-1/2 29-1/2 17-7/8 24-3/8 3.0 3.7 3.8 3 3 LC35/LC50 LC35 2-6/2-8 29-1/2 31-1/2 17-7/8 26-3/8 3.3 4.0 4.1 3 3 LC35/LC50 LC35 2-6/3-0 29-1/2 35-1/2 17-7/8 30-3/8 3.8 4.6 4.7 3 3 LC35/LC50 LC35 2-6/3-6 E3 29-1/2 41-1/2 17-7/8 36-3/8 4.5 5.5 5.7 3 3 LC35/LC50 LC35 2-6/3-8 29-1/2 43-1/2 17-7/8 38-3/8 4.8 5.8 6.0 3 3 LC35/LC50 LC35 2-6/4-0 29-1/2 47-1/2 17-7/8 42-3/8 5.3 6.4 6.7 3 3 LC35/LC50 LC35 2-6/4-6 29-1/2 53-1/2 17-7/8 48-3/8 6.0 7.4 7.7 3 3 LC35/LC50 LC35 2-6/5-0 29-1/2 59-1/2 17-7/8 54-3/8 6.7 8.3 8.6 3 3 LC35/LC50 LC35 2-6/5-6 29-1/2 65-1/2 17-7/8 60-3/8 7.5 9.2 9.6 3 3 LC35/LC50 LC35 2-6/6-0 29-1/2 71-1/2 17-7/8 66-3/8 8.2 10.1 10.6 3 3 LC35/LC50 LC35 2-8/1-3 31-1/2 14-1/2 1.5 3 3 LC35 2-8/1-6 31-1/2 17-1/2 2.0 3 3 LC35 2-8/2-0 31-1/2 23-1/2 3.0 3 3 LC35 2-8/2-4 31-1/2 27-1/2 3.7 3 3 LC35 2-8/2-6 31-1/2 29-1/2 4.1 3 3 LC35 2-8/2-8 31-1/2 31-1/2 19-7/8 26-3/8 3.6 4.4 4.4 3 3 LC35/LC50 LC35 2-8/3-0 E3 31-1/2 35-1/2 19-7/8 30-3/8 4.2 5.0 5.2 3 3 LC35/LC50 LC35 2-8/3-6 31-1/2 41-1/2 19-7/8 36-3/8 5.0 6.0 6.2 3 3 LC35/LC50 LC35 2-8/3-8 31-1/2 43-1/2 19-7/8 38-3/8 5.3 6.4 6.6 3 3 LC35/LC50 LC35 2-8/4-0 31-1/2 47-1/2 19-7/8 42-3/8 5.8 7.0 7.3 3 3 LC35/LC50 LC35 2-8/4-6 31-1/2 53-1/2 19-7/8 48-3/8 6.7 8.0 8.3 3 3 LC35/LC50 LC35 2-8/5-0 31-1/2 59-1/2 19-7/8 54-3/8 7.5 9.0 9.4 3 3 LC35/LC50 LC35 2-8/5-6 31-1/2 65-1/2 19-7/8 60-3/8 8.3 10.0 10.4 3 3 LC35/LC50 LC35 2-8/6-0 31-1/2 71-1/2 19-7/8 66-3/8 9.2 11.0 11.5 3 3 LC35/LC50 LC35 2 of 3 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E3 = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. To convert areas to square meters (m²), multiply square feet by 0.0929. (1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires performnace upgrade. Certain glass aspect ratios may require tempered glass. Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-17

DESIGN DATA VENT AND FIXED UNITS Unit Egress Frame (Inches) Clear pening (Inches) (Vent Units nly) Vent Area Ft 2 Visible Ft 2 Standard Thickness (mm) Performance Class & Grade 1 Width Height Width Height Ft 2 Annealed Tempered Vent Fixed 3-0/1-3 35-1/2 14-1/2 1.7 3 3 LC35 3-0/1-6 35-1/2 17-1/2 2.3 3 3 LC35 3-0/2-0 35-1/2 23-1/2 3.5 3 3 LC35 3-0/2-4 35-1/2 27-1/2 4.3 3 3 LC35 3-0/2-6 35-1/2 29-1/2 4.7 3 3 LC35 3-0/2-8 35-1/2 31-1/2 5.2 3 3 LC35 3-0/3-0 E1 35-1/2 35-1/2 23-7/8 30-3/8 5.0 5.9 6.0 3 3 LC35/LC50 LC35 3-0/3-6 E 35-1/2 41-1/2 23-7/8 36-3/8 6.0 7.0 7.2 3 3 LC35/LC50 LC35 3-0/3-8 E 35-1/2 43-1/2 23-7/8 38-3/8 6.4 7.4 7.6 3 3 LC35/LC50 LC35 3-0/4-0 E 35-1/2 47-1/2 23-7/8 42-3/8 7.0 8.2 8.4 3 3 LC35/LC50 LC35 3-0/4-6 E 35-1/2 53-1/2 23-7/8 48-3/8 8.0 9.4 9.6 3 3 LC35/LC50 LC35 3-0/5-0 E 35-1/2 59-1/2 23-7/8 54-3/8 9.0 10.5 10.9 3 3 LC35/LC50 LC35 3-0/5-6 E 35-1/2 65-1/2 23-7/8 60-3/8 10.0 11.7 12.1 3 3 LC35/LC50 LC35 3-0/6-0 E 35-1/2 71-1/2 23-7/8 66-3/8 11.0 12.9 13.3 3 3 LC35/LC50 LC35 3 of 3 Egress Notes: Check all applicable local codes for emergency egress requirements. E = Window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E1 = Window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.7 ft 2. E3 = With optional side pivot hardware, window meets minimum clear opening of 24" height, 20" width, and 5.0 ft 2. To convert areas to square meters (m²), multiply square feet by 0.0929. (1) Maximum performance when glazed with the appropriate glass thickness. Second value, where shown, requires performnace upgrade. Certain glass aspect ratios may require tempered glass. Rev. 05/31/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-18

DESIGN DATA FIXED UNITS Unit Frame (Inches) Visible Ft 2 Standard Thickness (mm) Width Height Annealed Tempered Performance Class & Grade 1 4-0/1-3 47-1/2 14-1/2 2.4 3 3 LC35 4-0/1-6 47-1/2 17-1/2 3.2 3 3 LC35 4-0/2-0 47-1/2 23-1/2 5.0 3 3 LC35 4-0/2-4 47-1/2 27-1/2 6.1 3 3 LC35 4-0/2-6 47-1/2 29-1/2 6.7 3 3 LC35 4-0/2-8 47-1/2 31-1/2 7.3 3 3 LC35 4-0/3-0 47-1/2 35-1/2 8.4 3 3 LC35 4-0/3-6 47-1/2 41-1/2 10.1 3 3 LC35 4-0/3-8 47-1/2 43-1/2 10.7 3 3 LC35 4-0/4-0 47-1/2 47-1/2 11.9 3 3 LC35 4-0/4-6 47-1/2 53-1/2 13.6 3 3 LC35 4-0/5-0 47-1/2 59-1/2 15.3 3 3 LC35 4-0/5-6 47-1/2 65-1/2 17.0 3 3 LC35 4-0/6-0 47-1/2 71-1/2 18.7 3 3 LC35 4-6/1-3 47-1/2 14-1/2 2.7 3 3 LC35 4-6/1-6 47-1/2 17-1/2 3.7 3 3 LC35 4-6/2-0 47-1/2 23-1/2 5.7 3 3 LC35 4-6/2-4 47-1/2 27-1/2 7.0 3 3 LC35 4-6/2-6 47-1/2 29-1/2 7.7 3 3 LC35 4-6/2-8 47-1/2 31-1/2 8.3 3 3 LC35 4-6/3-0 47-1/2 35-1/2 9.6 3 3 LC35 4-6/3-6 47-1/2 41-1/2 11.6 3 3 LC35 4-6/3-8 47-1/2 43-1/2 12.3 3 3 LC35 4-6/4-0 47-1/2 47-1/2 13.6 3 3 LC35 4-6/4-6 47-1/2 53-1/2 15.5 3 3 LC35 4-6/5-0 47-1/2 59-1/2 17.5 3 3 LC35 4-6/5-6 47-1/2 65-1/2 19.5 3 3 LC35 4-6/6-0 47-1/2 71-1/2 21.5 3 3 LC35 5-0/1-3 47-1/2 14-1/2 3.1 3 LC35 5-0/1-6 47-1/2 17-1/2 4.2 3 3 LC35 5-0/2-0 47-1/2 23-1/2 6.4 3 3 LC35 5-0/2-4 47-1/2 27-1/2 7.9 3 3 LC35 5-0/2-6 47-1/2 29-1/2 8.6 3 3 LC35 5-0/2-8 47-1/2 31-1/2 9.4 3 3 LC35 5-0/3-0 47-1/2 35-1/2 10.9 3 3 LC35 5-0/3-6 47-1/2 41-1/2 13.1 3 3 LC35 5-0/3-8 47-1/2 43-1/2 13.8 3 3 LC35 5-0/4-0 47-1/2 47-1/2 15.3 3 3 LC35 5-0/4-6 47-1/2 53-1/2 17.5 3 3 LC35 5-0/5-0 47-1/2 59-1/2 19.7 3 3 LC35 5-0/5-6 47-1/2 65-1/2 22.0 3 3 LC35 5-0/6-0 47-1/2 71-1/2 24.2 3 3 LC35 6-0/1-3 47-1/2 14-1/2 3.8 3 LC35 6-0/1-6 47-1/2 17-1/2 5.1 3 LC35 6-0/2-0 47-1/2 23-1/2 7.9 3 3 LC35 6-0/2-4 47-1/2 27-1/2 9.7 3 3 LC35 6-0/2-6 47-1/2 29-1/2 10.6 3 3 LC35 6-0/2-8 47-1/2 31-1/2 11.5 3 3 LC35 6-0/3-0 47-1/2 35-1/2 13.3 3 3 LC35 6-0/3-6 47-1/2 41-1/2 16.0 3 3 LC35 6-0/3-8 47-1/2 43-1/2 16.9 3 3 LC35 6-0/4-0 47-1/2 47-1/2 18.7 3 3 LC35 6-0/4-6 47-1/2 53-1/2 21.5 3 3 LC35 6-0/5-0 47-1/2 59-1/2 24.2 3 3 LC35 6-0/5-6 47-1/2 65-1/2 26.9 3 3 LC35 6-0/6-0 47-1/2 71-1/2 29.6 3 3 LC35 (1) Maximum performance when glazed with the appropriate glass thickness. Certain glass aspect ratios may require tempered glass. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-19

DETAILED PRDUCT DESCRIPTINS FRAME verall frame depth: 3-1/4" on all frame types. Frame members are mitered and heat fused to provide a fully welded corner assembly. Sill is fitted with weeps. Frame: [1-1/8" setback nail fin for 2-1/8" wall depth] [Block frame for 3-1/4" wall depth] [Integral flange for 3" wall depth]. Interior and exterior frame surfaces are extruded rigid PVC. SASH Sash members are extruded, rigid PVC [with optional foam insulation 1]. Sash members are mitered and heat-fused to provide a fully welded corner assembly. Contains sealed insulating glass. WEATHERSTRIPPING Vent units include weatherstripping around the sash perimeter with a fin-type, pile and an extruded bulb weatherstrip. GLAZING SYSTEM Quality float glass complying with ASTM C 1036. Exterior face-glazed sealed insulating glass. Dual-Pane insulating glass [[annealed] [tempered]] [[Advanced] [NaturalSun] [SunDefense ] [Bronze, Advanced] Low-E coated [with Argon]] [bscure 2] [High Altitude 1]. -or- 1" Triple-Pane [[annealed] [tempered]] [[Advanced] [NaturalSun] Low-E coated [with Argon]] [bscure 2] [High Altitude 1]. INTERIR / EXTERIR Window frame and sash members are [[White] [Almond] [Fossil] with integral color extruded throughout the profiles] [[Brown] [Black] [Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan] [Fossil] exterior, consisting of a solar reflective coating exceeding AAMA 613 test requirements, with White integral color extruded throughout the profiles on the interior]. All exposed PVC surfaces are smooth, glossy and uniform in appearance. HARDWARE Multi-point unison lock with single handle is factory-installed zinc die cast. Lock tie-bars are stainless steel. High quality [steel] [stainless steel] dual-arm roto-operator with fold down crank handle on sill. Hinge arms are [steel] [stainless steel]. Corrosion-resistant fasteners of PVC-compatible material. Hardware finish is [White] [Almond] [Fossil]. INSECT SCREEN Set in aluminum frame and fitted to interior of window. Screen frame finish is baked enamel, color to match interior. Supplied complete with all necessary hardware. Conventional Black Fiberglass Black vinyl coated 18/16 mesh fiberglass screen cloth complying with ASTM D 3656 and SMA 1201. PTINAL PRDUCTS Grilles Grilles-Between-the- [Dual-Pane Insulating glass contains [[3/4"] [1"] contoured] [ flat] aluminum grilles permanently installed between two panes of glass] [Triple-Pane Insulating glass contains 3/4" contoured aluminum grilles permanently installed between three panes of glass]. Patterns are [Traditional] [9-Lite Prairie] [Top Row]. Exterior grille color [3/4" Grille is [White] [Almond3] [Fossil 3] [Brown] [Black] [Brick Red] [Hartford Green] [Morning Sky Gray] [Poplar White] [Portobello] [Tan]] [1" Grille is [White] [Almond 3] [Fossil 3]] [ Grille is [White] [Almond 3] [Fossil 3]]. Simulated-Divided-Light grilles without spacer 7/8" Grilles permanently bonded to the interior and exterior of glass. Patterns are [Traditional] [9-Lite Prairie] [Top Row]. Grilles match color of interior and exterior frame. Available only on units glazed with dual-pane insulated glass. Hardware ptional limited opening hardware available for vent units in [White] [Almond] [Fossil] extruded vinyl to match the unit; nominal 3" opening. ptional window opening control device available for field installation. Device allows window to open less than 4" with normal operation, with a release mechanism that allows the sash to open completely. Complies with ASTM F2090-10. (1) Dual Pane IG High Altitude glazings are available with or without Argon. Triple Pane IG High Altitude glazings are only available without Argon. (2) bscure glass not available with Bronze Advanced Low-E IG. (3) Almond grilles only available on Almond units. Almond units with grilles will have an Almond grille color, Fossil extruded color units with grilles have a Fossil grille color. Rev. 06/26/2018 Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-20

PTINAL FAM INSULATIN 3 1/4" AW [83] VENT HEAD LCK JAMB HINGE JAMB PERATR SILL Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-21

UNIT SECTINS Installation Types STANDARD BLCK FRAME 3 1/4" AW [83] STANDARD NAIL FIN 1 1/8" [29] 1 1/8" [29] 2 1/8" [54] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 3/8" [19] 1 1/8" [29] 3/4" [19] 2 1/8" [54] 2 1/4" [58] 2 9/16" [65] 3/4" 1/4" [6] 3" [77] 2 1/4" [58] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] 2 9/16" [65] 2 1/4" [58] 2 9/16" [65] BLCK FRAME with INTEGRAL FLANGE 1/4" [6] 2 1/2" [63] 3" [77] NAIL FIN with J-CHANNEL FLUSH FLANGE 2 1/4" [57] GLAZING PTINS 3/4" Insulating 1" Insulating 1" Triple Pane IG 2 1/2" [63] 2 1/2" [63] 2 1/2" [63] Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-22

UNIT SECTINS Standard Nail Fin 3 1/4" AW [83] VH HJ LJ 13/16" [20] 2 5/16" [59] VH VENT HEAD VS FRAME HEIGHT 2 1/2" [63] VS VENT SILL 2 1/8" [54] 1 1/8" [29] 2 1/2" [63] 2 1/4" [58] 1 1/8" [29] 2 1/4" [58] 1 1/8" [29] HJ HINGE JAMB FRAME WIDTH 1 1/8" [29] LJ LCK JAMB 1 1/8" 2 1/8" [54] 4 9/16" [116] 6 9/16" [167] 2 7/16" [62] 2 7/16" [62] 4 7/16" [113] 4 9/16" Wall 4 9/16" Wall 6 9/16" Wall ptional Factory Applied Wood Jamb Extensions Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-23

UNIT SECTINS Block Frame 3 1/4" AW [83] 3 1/4" AW [83] FH 2 9/16" [65] FJ FRAME HEIGHT 2 1/4" [58] 2 1/2" [63] VH VS VENT HEAD VENT SILL FRAME WIDTH 1 15/16" [49] 3 1/8" FH FS FIXED HEAD FIXED SILL FS 3 1/8" 2 9/16" [65] 1 15/16" [49] FRAME WIDTH 6 11/16" [170] 5 [143] 13/16" [20] 2 5/16" [59] 3 1/4" [83] 2 1/2" [63] FRAME WIDTH 1/2" [13] FRAME WIDTH TTAL FRAME WIDTH 6 1/8" [156] 13/16" [20] 2 5/16" [59] 3 1/4" [83] 2 1/2" [63] 3 1/8" 3 1/4" [83] FJ FIXED JAMB VIM VERTICAL INTEGRAL MULLIN VH HJ VIM VS HJ HINGE JAMB LJ LCK JAMB LJ LCK JAMB HJ HINGE JAMB VH FH HJ VIM VIM VS FS VIM VERTICAL INTEGRAL MULLIN VIM VERTICAL INTEGRAL MULLIN HJ HINGE JAMB LJ LCK JAMB FJ FIXED JAMB FJ FIXED JAMB LJ LCK JAMB HJ HINGE JAMB FRAME WIDTH 1/2" [13] FRAME WIDTH 1/2" [13] FRAME WIDTH TTAL FRAME WIDTH Scale 3" = 1' 0" All dimensions are approximate. Pella 2018 Architectural Design Manual Division 08 penings Windows and Doors www.pellaadm.com V250-CM-24