More power, more efficiency SINGE POINT AJUSTABE FOW RATE AUTOMATIC UBRICATORS smart lubrication Swiss made / worldwide patents
13006 EffSimalube ESS 8pp 23/3/07 9:46 AM Page 2 Automatic lubricators... less breakdowns, less maintenance. Eliminate manual lubrication Automatic lubricators remove the need for manual lubrication by grease gun or any other cumbersome applicator. They reduce valuable maintenance team hours. Staff need only inspect the point rather than grease it to ensure all is in working order. Time saved can be spent elsewhere on more pressing jobs. It's like suddenly having more people on your maintenance team working 24/7 without the extra cost. Eliminate contamination Automatic lubricators operate providing a constant positive pressure to the bearing/seal, which all but eliminates the ingress of dirt. The closed system also means that contamination on the outside of the grease nipple cannot be transferred from point to point. Ensure greasing points are not missed Sometimes even the most experienced maintenance person might miss a grease point... it might be a critical one! With automatic lubricators on site, this won't happen. Plus you have the added peace of mind the correct amount of grease has been applied. Wear and tear of equipment Manual greasing once per day / week generally means a large injection of lubricant to a point. It is a proven fact that consistent greasing of a point keeps friction levels down (lower temperature) and increases component life. This will result in improved running time of your equipment. This then becomes your insurance policy against breakdowns and profit robbing maintenance costs. Easier and safer for your maintenance crew The f lexibility of remote mounting and quick connection accessories make automatic lubricators versatile for application in difficult to reach grease points. ubricators can be located in safe, easy to reach locations, reducing the risk of strains or potential accidents. No more productivity loss through delays from isolated equipment not being greased. Suit just about any application Automatic lubricators operate consistently throughout a wide range of ambient temperatures and in the presence of contaminants, so they are suitable for just about any application where regular greasing is essential to smooth operation.
Why is Simalube the best value? Swiss-made Simalube Automatic lubricators offer many unique features that will benefit your operation. Here are a few of the major advantages: Fully adjustable clock. Only Simalube gives you the choice of increasing or decreasing the grease f low rate by simply rotating the clock dial with an Allen key. You can even turn it off for short periods during maintenance shutdowns. Other gas driven lubricators have a fixed dispensing speed and duration, offering you no f lexibilit y, so they cost more to operate. Improved transparent housing. The current Simalube range comes in a patented transparent housing which is superior to others available on the market. It prevents gas diffusion through the walls of the housing, making Simalube more efficient and reliable than ever. Windows allow easy checking and marking of grease levels. More pressure. In Simalube automatic lubricators the maximum pressure achieved through our patented gas-producing dry cells is 5 BAR (72.5 PSI). This is more than most available on the market, ensuring that Simalube will get grease to most lubrication points. Patented gas producing dry cells. Most competitors offer grease pressure systems driven by dangerous chemicals and acids. Simalube s patented gas producing dry cells are completely safe, harmless and are approved. With other systems, acids and chemicals remain in the container after the grease has been expelled. This is potentially harmful and dangerous to the environment. Wider temperature application range. Across Australia high and low seasonally variable temperatures are common. Simalube offers a predictable output rate. The temperature sensitive chemically driven lubricators have a highly variable output rate and a maximum ambient operating temperature of 40 C. Simalube operates effectively in ambient temperatures from 55 C down to -20 C with simple compensation available via the fully adjustable clock. Widest range of accessories. The wide range of accessories are designed to suit just about any and every application. The accessories are designed for reliabilit y, long life, and maximum lubricant f low efficiency Wide range of sizes to suit any application. Simalube is now available in four sizes; 30, 60, 125 and 250ml. Whatever your automatic lubrication needs, there is a size to suit. If you require even more grease volume, our 4-fold adaptor will grow your supply to 1,000ml.. Tried and proven around the world. For many years now, plant operators and maintenance engineers have been discovering Simalube s cost and time saving benefits. They are economical, reliable, long lasting and safe for an ever-increasing list of applications. iterally millions have been sold world-wide.
The inside story... Cartridge with patented gas production drycells The period of operation can be easily adjusted from 1 12 months simalube 250 ø 52 mm (2.05 in.) simalube 125 simalube 60 ø 52 mm (2.05 in.) 186 mm (7.3 in.) simalube 30 ø 52 mm (2.05 in.) ø 52 mm (2.05 in.) 14 mm (0.55 in.) 43 mm (1.7 in.) 14 mm (0.55 in.) 62 mm (2.4 in.) 100 mm (3.9 in.) 14 mm (0.55 in.) 14 mm (0.55 in.) R1/4 R1/4 R1/4 R1/4 Environmentally friendly / Swiss made / worldwide patents
Temperature/Output rate When ambient temperatures are high or low, or when grease requirements deviate, the amount of grease per day can be adjusted using the values indicated. smart lubrication simalube 125 Setting 1 3 6 9 12 Temperature days g/day days g/day days g/day days g/day days g/day -20 50 2.20 140 0.80 270 0.44 360 0.35 500 0.26 4 35 3.17 100 1.14 200 0.53 300 0.35 420 0.26 20 30 3.70 90 1.23 180 0.61 270 0.44 360 0.35 40 28 3.96 86 1.32 172 0.61 262 0.44 352 0.35 55 25 4.40 80 1.40 160 0.70 250 0.44 340 0.35 simalube 250 Setting 1 3 6 9 12 Temperature days g/day days g/day days g/day days g/day days g/day -20 50 4.40 140 1.58 250 0.88 330 0.70 450 0.53 4 35 6.25 100 2.20 195 1.14 300 0.70 400 0.53 20 30 7.30 90 2.46 180 1.23 270 0.79 360 0.61 40 27 8.18 86 2.55 175 1.23 265 0.79 355 0.61 55 25 8.80 80 2.73 165 1.32 260 0.88 350 0.61 The values refer to standard conditions, S01 with no counter pressure. Most of all at low temperatures the values can deviate considerably from one grease type to the other. The dispensed grease quantity / day is inf luenced by: counter pressure/ resistance from grease lines ambient temperature viscosity of the grease Standard ubricants (Custom Fill available on request) Code Application Thickener Temp Range S01 Multipurpose Grease i/ca -30/+120 S02 Multipurpose Grease+MoS2 i -25/+130 S04 High Temperature & Waterproof Grease Ca/Sulf -10/+200 S06 Fluid Grease i -30/+80 S09 BiodegradeableGrease i/ca -30/+130 S10 Food Industry Grease Complex -20/+130 S14 Chain Oil - -10/+150 S15 High Temperature Chain Oil - 0/+250 S18 Food Industry Chain Oil - -40/+80 Available in sizes 30ml, 60ml, 125ml and 250ml. www.etsaustralia.com.au
ACCESSORIES TO SUIT YOUR NEES Fixed mounting support Fixed mounting support with protective cover for simalube SP2082 SP2083 SP2084 SP2080 SP1060 SP2000 SP2082 SP2083 SP2084 SP2080 SP2000 SP2082 SP2083 SP2084 SP2081 SP2080 SP1060 SP2000 Y-manifold for 250 ml lubricant need WRONG 4-fold adaptor for 500 ml lubricant need SP1050 X Problematic due to different counter pressure! SP4100 SP4101 Chain lubrication with bracket, universally adjustable ubrication of elevator guides or wire ropes SP2035 SP2036 SP2037 SP2038 SP2010 SP2039 Chain lubrication with bracket, universally adjustable Chain lubrication with round brush and two clamps Round brush with 90º connection SP2800 SP2035 SP2036 SP2037 SP2038 SP1045 SP1046 SP2014 SP2034 SP2010 SP2013 SP2010 SP1005 SP2041 Chain lubrication with lateral connection SP2035S SP2036S SP2037S Chain lubrication with round brush and clamp SP2010 ust Cap SP2075 SP1045 SP1046 SP2034
Bent connection 45 1/4................................SP1001 Clamp for round brush (part 2034) 28mm.............................. SP2013 Bent connection 90 1/4................................SP1002 20 H 30 istance holder to clamp for round brush 15mm......... SP2014 20 20 90o connection with thread 70mm, incl. 2 nuts.....................sp1005 Non-return valve 1/8............................... SP2020 1/4............................... SP2021 Connection, Straight 1/4 x 3/8................................................SP1010 1/2................................................SP1011 28 30 Round brush horse bristles ç25x15mm.......................... SP2034 Connection nipple 1/4 x 1/8................................................SP1020 1/4................................................SP1021 M6..................................................SP1022 M8..................................................SP1023 M8x1..............................................SP1024 M10................................................SP1025 M10x1.............................................SP1026 M12................................................SP1027 M12x1,5..........................................SP1028 1/4 (UNF).......................................SP1121 Extension 35mm..............................................SP1040 50mm..............................................SP1041 17.5 31.5 31.5 151 23 31.5 23 Brush 40mm.............................. SP2035 70mm.............................. SP2036 100mm............................. SP2037 25mm.............................. SP2038 Aluminium Brush, lateral connection horse bristles 40mm............................. SP2035S 70mm............................. SP2036S 100mm............................ SP2037S Aluminium Elevator brush horse bristles........................ SP2039 Screwed connection with hole 25mm incl 1 nut..................................sp1045 60mm incl 2 nuts................................sp1046 102 5 16 16 17 Round brush bristles ç 25x45mm............. SP2041 Y-manifold (incl reducing nipple 1021) 1/4................................................SP1050 28 ø 8 ø 8 Quick connection for hose ç 8mm 1/4 female......................................sp1060 Quick connection for hose ç 8mm 1/8 male.........................................sp1070 1/4 male.........................................sp1071 3/8 male.........................................sp1072 36 ø 70 ø 58 103 18 Mounting support consisting of: flange............................ SP2080 connecting nipple 1/4 nut /brass. nickel plated Protective cover to mounting support 2080............. SP2081 Steel, varnished Hose ç 8mm permetre..................................sp2000 22 55 ø 6.5 20 Bracket to mounting support 75mm (1 bore)...................... SP2082 240mm (3 bore...................... SP2083 390mm (5 bore)..................... SP2084 Steel, burnished Clamp for Simalube lubricator 50mm..............................................SP2010 50 60 84 35 Bracket universally adjustable................................... SP2800 Steel, burnished Adaptor for Perma clamp 50mm..............................................SP2012 ø 100 16 25 4-fold adaptor 1/2............................... SP4100 1/4............................... SP4101 /brass, nickel plated
NPMMS=bÑÑpáã~äìÄÉ=bpp=Uéé==OPPMT==VWQS=^j==m~ÖÉ=U Summing up the case for Simalube: Why choose Automatic ubricators over manual greasing? 1. Eliminate manual relubrication 2. Ensure not one single greasing point gets missed 3. Maintains bearing/seal at constant positive pressure 4. Easier and safer for your maintenance crew 5. Suit just about any application Why choose Simalube over the others? 1. Fully adjustable clock 2. One model fits all 3. Patented gasproducing drycells 4. Wider temperature application range 5. Widest range of accessories 6. Compact size, safe and environmentally friendly 7. Windows for checking level of grease 8. Top qualit y service and back up from long standing Australian distributor What s the next step? It's really quite simple... just contact your local Simalube distributor and ask for a quote on: Purchase of Simalube lubricators for your site, or Quote for an on-site survey to see which Simalubes might need accessories and remote mounting, or Complete turn key solution where we install Simalubes at your site after a survey, or Ongoing Simalube replacement service after initial installation. Australian istributor ETS Head Office 4 Cache Bend Wangara WA 6065 Your local Simalube istributor: Ph: 08 6305 0926 Fax: 08 6305 0946 Mobile: 0419 917 803 www.etsaustralia.com.au Effective 2k 13006