Stirrup-shaped handles, machine handles, apparatus handles 231
K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles K0186.12510 Order No. Order No. A D D1 D2 H R T Load tumbled tumbled bearing plastic-coated, black capacity N K0186.10006 K0186.100061 100 M6 18 12 42 20 12 1000 K0186.11208 K0186.112081 112 M8 20 14 47 22 15 1000 K0186.12510 K0186.125101 125 M10 22 16 53 24 18 1000 K0186.14012 K0186.140121 140 M12 25 18 59 26 20 1000 K0187 Stirrup-shaped handles Black duroplastic PF 31; bush in brass or in galvanized steel Deburred and high-polish finish K0187.101 KIPP Stirrup-shaped handles 232 Order No. Bush material Load bearing Approx. capacity weight N K0187.101 brass 300 0,180 K0187.201 galvanized steel 300 0,180
K0188 Stirrup-shaped handles min. 14 Duroplastic PF 31, black. Bush brass or steel galvanized Deburred and high-polish finish K0188.114008 KIPP Stirrup-shaped handles Order No. Bush material Load bearing Approx. capacity weight N K0188.114008 brass 500 0,180 K0188.214008 galvanized steel 500 0,180 Notes 233
K0189 Stirrup-shaped handles Form A Thermoplastic; bush in brass Handle and handle cap in black K0189.109406 On request: Other handle or handle cap colours. Form B KIPP Stirrup-shaped handles 234 Order No. Form A B B1 D D1 H L L1 S T T1 T2 Approx. weight K0189.109406 A 93,5 17 26 M6-35 119,5 67,5 5,8 - - 15,5 0,049 K0189.111706 A 117 19 29 M6-40 145 89 6,4 - - 15,5 0,086 K0189.111708 A 117 19 29 M8-40 145 89 6,4 - - 16 0,080 K0189.113206 A 132 20 31 M6-45 163 101 6,7 - - 15,5 0,098 K0189.113208 A 132 20 31 M8-45 163 101 6,7 - - 16 0,091 K0189.117910 A 179 22 35 M10-50 213 145 7,1 - - 22 0,147 K0189.209406 B 93,5 17 26 6,8 12 35 119,5 67,5 5,8 4,5 19-0,032 K0189.211708 B 117 19 29 8,5 13,5 40 145 89 6,4 8 23-0,041 K0189.213208 B 132 20 31 8,5 13,5 45 163 101 6,7 8 22-0,059 K0189.217908 B 179 22 35 8,5 13,5 50 213 145 7,1 12 22-0,087
K0190 Stirrup-shaped handles Thermoplast PA (polyamide), glass-bead reinforced or PP (polypropylene), fibreglass reinforced. anthracite grey K0190.113208 The fastening hole is designed in such a way that the stirrup-shaped handles can be secured from the operating side with a socket head screw or a hexagon nut. On request: Other handle colours. KIPP Stirrup-shaped handles Order No. Surface finish A B C D H L L1 SW T T1 Load bearing capacity N K0190.109406 thermoplastic PA 94 ±0,5 21 8 6,6 36 109 76 10 13 6 1000 K0190.111708 thermoplastic PA 117 ±0,5 26 10 9 41 136 94 13 15 8 1500 K0190.113208 thermoplastic PA 132 ±0,5 27 11 9 44 154 112 13 16 8 1500 K0190.117908 thermoplastic PA 179 ±1,0 28 11 9 50 197 156 13 17 8 1500 K0190.209406 thermoplastic PP 94 ±0,5 21 8 6,6 36 109 76 10 13 6 500 K0190.211708 thermoplastic PP 117 ±0,5 26 10 9 41 136 94 13 15 8 800 K0190.213208 thermoplastic PP 132 ±0,5 27 11 9 44 154 112 13 16 8 800 K0190.217908 thermoplastic PP 179 ±1,0 28 11 9 50 197 156 13 17 8 800 235
K0191 Stirrup-shaped handles Form A Ø15 Glass bead reinforced thermoplastic H C Matt black or orange 13 4 Ø9 L1 for socket head screw M8 DIN 912 B K0191.1120081 Dimension A applies after mounting. Before mounting it can be up to 2 mm smaller due to the release of the bending stress. A L Form B 13 H 9,6 C Ø6,6 L1 for countersunk screw M6 DIN 7991 B A L KIPP Stirrup-shaped handles 236 Order No. Order No. Form A B C H L L1 Load Approx. matt black orange bearing weight capacity N K0191.1120081 K0191.1120082 A 120 26 8 42 138 96 1000 0,053 K0191.1140081 K0191.1140082 A 140 26 8 42 158 116 1000 0,058 K0191.1160081 K0191.1160082 A 160 28 9 45 178 136 1000 0,074 K0191.2120061 K0191.2120062 B 120 26 8 42 138 96 1000 0,056 K0191.2140061 K0191.2140062 B 140 26 8 42 158 116 1000 0,061 K0191.2160061 K0191.2160062 B 160 28 9 45 178 136 1000 0,076
K0192 Bow handles Form A without cover cap D1 B1 Glass-ball reinforced thermoplastic. matt black. K0192.110006 H1 H Ergonomic and functional bow handles with temperature resistance of -50 C to +130 C. H2 D L1 A L M B Delivery includes black socket head cap screws DIN 912, nuts DIN 934 and galvanized washers DIN 125 as well as caps. The versions K0192.110006 and K0192.112006 are supplied without cover caps. Form B with cover cap D1 cover cap B1 H2 H1 H L1 D A L M B KIPP Bow handles Order No. Form A B B1 D D1 H H1 H2 L L1 M Load bearing capacity N K0192.110006 A 100 27 22 7 11 38 29 5 130 79 M6x25 600 K0192.112006 A 120 29 23 7 11 38 29 8 150 91 M6x25 600 K0192.212008 B 120 33 22 9 14 51 36 5 153 87 M8x30 1000 K0192.214008 B 140 38 26 9,5 15 59 42 6 178 101 M8x30 1000 237
K0193 Bow handles Glass-ball reinforced thermoplastic. Form A with base plate D1 B2 matt black. K0193.110006 cover cap base plate H1 H Ergonomic and functional bow handles with temperature resistance of -50 C to +130 C. H2 D L1 A L M B1 B Delivery includes black oxide finish socket head cap screws DIN 912, nuts DIN 934 and galvanized washers DIN 125 as well as caps. The versions K0193.110006 and K0193.210006 are supplied without cover caps. Form B without base plate D1 B2 cover cap H1 H2 H D L1 M A B1 L KIPP Bow handles 238 Order No. Surface finish Form A B B1 B2 D D1 H H1 H2 L L1 M Load bearing capacity N K0193.110006 without cover cap A 100 48 23 19 7 11 40 29 6 121 84 M6x25 600 K0193.112006 with cover cap A 120 57 28 23 7 12 52 36 7 152 104 M6x25 600 K0193.114008 with cover cap A 140 62 31 25 9,5 16 56 37 7,5 177 122 M8x30 600 K0193.210006 without cover cap B 100-23 19 7 11 38 31 4 121 84 M6x25 600 K0193.212006 with cover cap B 120-28 23 7 12 50 38 5 152 104 M6x25 600 K0193.214008 with cover cap B 140-31 25 9,5 16 54 39 5,5 177 122 M8x30 600
K0194 Bridge handle Material, surface finish: Anthracite grey thermoplastic K0194.11406 KIPP Bridge handle Order No. D D1 A B C E H L R R1 S T Approx. weight K0194.11406 6,5 10,5 114 92 29 28 48 134 117 79 15 6,5 0,037 K0195 Stirrup-shaped handles Profile aluminium EN AW-6060 High quality anodized version, glass-ball blasted, semi-matt finish K0195.120061 KIPP Stirrup-shaped handles Order No. Surface finish A B D H H1 L S T Load Approx. bearing weight capacity N K0195.120061 black anodized 120 22 M6 46 31 144 24 12 1000 0,145 K0195.140081 black anodized 140 25 M8 53 36 168 28 15 1000 0,220 K0195.120063 natural colour anodized 120 22 M6 46 31 144 24 12 1000 0,145 K0195.140083 natural colour anodized 140 25 M8 53 36 168 28 15 1000 0,220 239
K0196 Stirrup-shaped handle Material, surface finish: Anthracite grey thermoplastic; bush in brass. K0196.11906 KIPP Stirrup-shaped handle Order No. D A B C E H L R T Approx. weight K0196.11906 M6 119 98 33 25 43,5 150 94 10 0,045 K0197 Slanting stirrup-shaped handles 30 Ø24 60 Grip in glass-ball reinforced thermoplastic; threaded bush in brass M6 9 15 22 Matt black or light grey 140 155 37 K0197.140061 Slant compact polyamide handle. Handle tube and handle foot are one unit. With its slanted contact surfaces, assembly is also possible under cramped spacial conditions. KIPP Slating stirrup-shaped handles 240 Order No. Colour Load bearing Approx. capacity weight N K0197.140061 matt black 1000 0,148 K0197.140062 light grey 1000 0,148
K0171 Stirrup-shaped handles with soft inner surface 25,5 Hard component in glass-ball reinforced thermoplastic; soft component in SEBS 53 Hard component matt black; soft component basalt grey 10 118 M8x25 29 150 77 K0171.515008 Heavy-duty polyamide handle. Excellent carrying and gripping comfort thanks to its soft inner surface. Black galvanized cylindrical screws, nuts and washers are supplied. For wet areas, the fastening material is supplied in refined steel (1.4301). 16 178 On request: With and without individual inscription, embossed or raised. Hard component and soft component are available in all RAL colours. KIPP Stirrup-shaped handles with soft inner surface Order No. Surface finish Load bearing Approx. capacity weight N K0171.515008-500 0,186 K0171.615008 for wet areas 500 0,186 241
K0198 Stirrup-shaped handles stainless steel stainless steel view A-A Form A Precision cast stainless steel 1.4308, Fasteners made of 1.4301 Form B Abrasive cleaned and matt gloss electropolished. K0198.140081 KIPP Stirrup-shaped handles, stainless steel Order No. Form A B D H H1 L S T Load Approx. bearing weight capacity N K0198.140081 A 140 25 M8x30 45 12 170 28 15 1000 0,550 K0198.180101 A 180 32 M10x40 58 15 218 36 18 1000 1,460 K0198.140082 B 140 25 M8x18 45 12 170 28 15 1000 0,550 K0198.180102 B 180 32 M10x20 58 15 218 36 18 1000 1,460 Notes 242
K0199 Stirrup-shaped handles EN AW-6060 Form A natural colour anodized Form B black anodized Form C titanium colour powder coated Matt-finished and anodized or powder-coated K0199.140082 KIPP Stirrup-shaped handles Order No. Order No. Order No. A B C C1 D H S T Load Approx. Form A Form B Form C bearing weight capacity N K0199.120061 K0199.120062 K0199.120063 120 146 10,5 22 M6 39 24 15 1000 0,127 K0199.140081 K0199.140082 K0199.140083 140 170 12 25 M8 45 28 16 1000 0,193 K0199.160081 K0199.160082 K0199.160083 160 194 13,5 28 M8 52 32 16 1000 0,293 K0200 Stirrup-shaped handles KIPP Stirrup-shaped handles Material, surface finish: Glass bead reinforced thermoplastic; matt black with fine texture K0200.140082 These handles possess extreme torsional strength and are highly operator friendly. Fastening screws, nuts and flat washers are supplied. For wet areas, the fastening screws, nuts and flat washers are supplied in refined steel. Order No. Order No. A B C C1 C2 D H S T Load Approx. - for wet areas bearing weight capacity N K0200.100051 K0200.100052 100 122 8,5 19 17 M5x22 33 20 13 1000 0,049 K0200.120061 K0200.120062 120 146 10,5 23 20,5 M6x25 39 24 15 1000 0,088 K0200.140081 K0200.140082 140 170 12 27 24 M8x30 45 28 16 1000 0,158 K0200.160081 K0200.160082 160 194 13,5 31 27,5 M8x35 52 32 20 1000 0,212 K0200.180081 K0200.180082 180 218 15,5 35 31 M10x40 58 36 20 1000 0,350 243
K0201 Stirrup-shaped handles round Round aluminium 41 10 Ø10 Surface matt-finished and natural colour or black anodized 1 M5 A K0201.055051 End washers not included. KIPP Stirrup-shaped handles round 244 Order No. Surface finish A Load Approx. Order No. bearing weight end washer capacity N K0201.055051 black anodized 55 500 0,023 K0201.1 K0201.088051 black anodized 88 500 0,029 K0201.1 K0201.100051 black anodized 100 500 0,032 K0201.1 K0201.120051 black anodized 120 500 0,037 K0201.1 K0201.180051 black anodized 180 500 0,049 K0201.1 K0201.200051 black anodized 200 500 0,053 K0201.1 K0201.235051 black anodized 235 500 0,063 K0201.1 K0201.250051 black anodized 250 500 0,067 K0201.1 K0201.055053 natural colour anodized 55 500 0,023 K0201.3 K0201.088053 natural colour anodized 88 500 0,029 K0201.3 K0201.100053 natural colour anodized 100 500 0,032 K0201.3 K0201.120053 natural colour anodized 120 500 0,037 K0201.3 K0201.180053 natural colour anodized 180 500 0,049 K0201.3 K0201.200053 natural colour anodized 200 500 0,053 K0201.3 K0201.235053 natural colour anodized 235 500 0,063 K0201.3 K0201.250053 natural colour anodized 250 500 0,067 K0201.3
K0202 Oval bow handles Oval aluminium Surface matt-finished and natural colour anodized or black anodized KIPP Oval bow handles K0202.055051 Order No. Order No. A L Load Approx. Black anodized natural colour anodized bearing weight capacity N K0202.055051 K0202.055053 55 63 500 0,024 K0202.088051 K0202.088053 88 96 500 0,030 K0202.100051 K0202.100053 100 108 500 0,032 K0202.120051 K0202.120053 120 128 500 0,037 K0202.180051 K0202.180053 180 188 500 0,050 K0202.200051 K0202.200053 200 208 500 0,055 K0202.235051 K0202.235053 235 243 500 0,064 K0202.250051 K0202.250053 250 258 500 0,068 Notes 245
K0203 Stirrup-shaped handles round plastic coating KIPP Stirrup-shaped handles round Order No. A Load Approx. bearing weight capacity N K0203.05505 55 1000 0,075 K0203.08805 88 1000 0,097 K0203.10005 100 1000 0,105 K0203.10205 102 1000 0,106 K0203.11505 115 1000 0,114 K0203.12005 120 1000 0,118 K0203.13605 136 1000 0,128 K0203.18005 180 1000 0,157 K0203.20005 200 1000 0,170 K0203.23505 235 1000 0,193 K0203.25005 250 1000 0,203 Round steel Surface very finely ground and matt-polish chromiumplated; connecting bridge with plastic coating K0203.05505 High quality handles for front panels and similar applications. K0204 Oval bow handles view A-A KIPP Oval bow handles Order No. Order No. A D D1 D2 H T Load black powder-coated natural colour anodized bearing capacity N K0204.10001 K0204.10003 100 M6 21/20 13 50 12 1000 246 K0204.11201 K0204.11203 112 M6 21/20 13 50 12 1000 K0204.12001 K0204.12003 120 M6 21/20 13 50 12 1000 K0204.12801 K0204.12803 128 M6 21/20 13 50 12 1000 K0204.1600106 K0204.1600306 160 M6 21/20 13 50 12 1000 K0204.1120108 K0204.1120308 112 M8 25/26 17 55 14 1000 K0204.1200108 K0204.1200308 120 M8 25/26 17 55 14 1000 K0204.1280108 K0204.1280308 128 M8 25/26 17 55 14 1000 K0204.16001 K0204.16003 160 M8 25/26 17 55 14 1000 K0204.18001 K0204.18003 180 M8 25/26 17 55 14 1000 K0204.19201 K0204.19203 192 M8 25/26 17 55 14 1000 K0204.35001 K0204.35003 350 M8 25/26 17 55 14 1000 Oval aluminium EN AW-6060 Black powder-coated, natural colour anodized K0204.10001 These handles are extremely robust and can be used where heavy duty equipment is called for.
K0205 Flat profile bow handles Profile aluminium EN AW-6060 view A-A Matt-finished, black or natural colour anodized K0205.18001 These elegant flat profile bow handles made of aluminium are especially suitable for machines, appliances, apparatuses, jigs and fixtures, etc. KIPP Flat profile bow handles Order No. Order No. A D T Load Approx. black anodized natural colour anodized bearing weight capacity N K0205.12001 K0205.12003 120 M5 10 500 0,085 K0205.18001 K0205.18003 180 M5 10 500 0,100 K0205.20001 K0205.20003 200 M5 10 500 0,120 K0205.35001 K0205.35003 350 M6 12 500 0,190 K0206 Stirrup-shaped handles in stainless steel stainless steel D1 Handle stainless steel 1.4305, Fasteners made of 1.4301 T D Electropolished. view A-A K0206.120 KIPP Stirrup-shaped handles in stainless steel Stainless steel pull handles are used mainly on equipment in the medical and food industry as well as in laboratories and neuclear technology. Order No. A D D1 H T Load Approx. bearing weight capacity N K0206.100 100 M5x10 8 35 10 1000 0,060 K0206.120 120 M5x10 10 40 10 1000 0,100 K0206.250 250 M5x10 10 40 10 1000 0,185 K0206.350 350 M5x10 10 40 10 1000 0,250 247
K0207 Angled machine handles Round steel Very finely ground and high-polish chromium-plated K0207.06008 KIPP Angled machine handles Order No. H S Load bearing Approx. capacity weight N K0207.06008 60 27 1000 0,190 K0207.12008 120 87 1000 0,287 K0208 Stirrup-shaped handles in stainless steel stainless steel KIPP Stirrup-shaped handles in stainless steel view A-A Stirrup-shaped handle in stainless steel 1.4305, fastening material 1.4301 Vibratory ground satin surface finish K0208.10005 248 Order No. A B D D1 H R T Load Approx. bearing weight capacity N K0208.10005 100 12 M5x10 8 40 22 10 1000 0,105 K0208.12005 120 12 M5x10 8 40 22 10 1000 0,118 K0208.15005 150 12 M5x10 8 40 22 10 1000 0,138 K0208.18005 180 12 M5x10 8 40 22 10 1000 0,158 K0208.25005 250 12 M5x10 8 40 22 10 1000 0,205 K0208.10006 100 19,5 M6x12 10 45 24 12 1000 0,216 K0208.12006 120 19,5 M6x12 10 45 24 12 1000 0,241 K0208.15006 150 19,5 M6x12 10 45 24 12 1000 0,279 K0208.18006 180 19,5 M6x12 10 45 24 12 1000 0,318 K0208.25006 250 19,5 M6x12 10 45 24 12 1000 0,407
K0209 All-purpose machine handles KIPP All-purpose machine handles view A-A Order No. A B Load Approx. bearing weight capacity N K0209.180 180 208 1000 0,552 K0209.200 200 228 1000 0,575 K0209.250 250 278 1000 0,620 K0209.300 300 328 1000 0,695 K0209.350 350 378 1000 0,732 K0209.400 400 428 1000 0,758 K0209.500 500 528 1000 0,815 K0209.600 600 628 1000 0,895 Aluminium Grip leg black powder-coated; connecting bridge natural colour anodized K0209.300 Black galvanized fastening screws with hexagon socket M12x70 as well as suitable washers and nuts are supplied. K0210 Lightweight handles KIPP Lightweight handles Form A connecting tube ground and natural colour anodized Form B connecting tube with serrated plastic coating Order No. Order No. A B Load Approx. Form A Form B bearing weight capacity N K0210.180 K0210.1803 180 204 500 0,165 K0210.200 K0210.2003 200 224 500 0,175 K0210.250 K0210.2503 250 274 500 0,185 K0210.300 K0210.3003 300 324 500 0,200 K0210.350 K0210.3503 350 374 500 0,210 K0210.400 K0210.4003 400 424 500 0,220 K0210.500 K0210.5003 500 524 500 0,245 K0210.600 K0210.6003 600 624 500 0,270 Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium K0210.200 The grip legs have 4 clamping webs within the area of the tube receiver. When pushing the connecting tube in, they are abraded and produce a seat with a precise fit. Black galvanized fastening screws, as well as suitable washers and nuts are supplied. 249
K0211 Tube handles A-20 mm 35 25 Connecting bridge in aluminium EN AW-6060; grip leg in polyamide glass-ball reinforced; threaded bush in brass; clamping sleeves in stainless steel 52 12 Connecting bridge natural colour or black anodized; grip leg aluminium colour or black M8 A 20 36 K0211.1200081 Pluggable oval-profile handles. Versions with plastic legs and aluminium oval bridge. B KIPP Tube handles Order No. Order No. Order No. A B Load Approx. Connecting bridge, natural colour Connecting bridge, natural colour Connecting bridge, black bearing weight anodized, grip leg aluminium colour anodized, grip leg black anodized, grip leg black capacity N 250 K0211.1200081 K0211.1200082 K0211.1200083 200 220 1000 0,255 K0211.1250081 K0211.1250082 K0211.1250083 250 270 1000 0,295 K0211.1300081 K0211.1300082 K0211.1300083 300 320 1000 0,334 K0211.1400081 K0211.1400082 K0211.1400083 400 420 1000 0,414 K0211.1500081 K0211.1500082 K0211.1500083 500 520 1000 0,493
K0212 Slanting tube handles Ø30x1,5 Connecting tube in aluminium EN AW-6060; grip leg in polyamide, glass-ball reinforced; threaded bush in brass 45 9 Connecting tube matt-polished anodized; grip leg black M6 A 15 22 37 K0212.2150061 Slanting tube handles in modern industrial design. Precision fit of tube on plastic tenon due to clamping webs. B KIPP Slanting tube handles Order No. A B Load Approx. bearing weight capacity N K0212.2150061 150 165 800 0,112 K0212.2200061 200 215 800 0,130 K0212.2250061 250 265 800 0,148 K0212.2300061 300 315 800 0,165 K0212.2350061 350 365 800 0,184 K0212.2400061 400 415 800 0,201 251
K0213 Apparatus handles Form A Profile aluminium EN AW-6060 Matt-finished, black anodized or natural colour anodized K0213.12001 view A-A Form B view B-B KIPP Apparatus handles 252 Order No. Form Surface finish Load bearing Approx. capacity weight N K0213.12001 A black anodized 500 0,070 K0213.09001 B black anodized 300 0,010 K0213.12003 A natural colour anodized 500 0,070 K0213.09003 B natural colour anodized 300 0,010
K0214 Stirrup-shaped handles, high-polish chromium-plated blend washer view A-A Steel Very finely ground and high-polish chromium-plated K0214.10204 These stirrup-shaped handles are used primarily on optical devices, laboratory installations, audio, video and hi-fi equipment, etc. The bearing washers are supplied unattached. On request: Other surface finishes. KIPP Stirrup-shaped handles, high-polish chromium-plated Order No. A D D1 D2 H T Load Approx. bearing weight capacity N K0214.03203 32 M3 5 8 21 6 1000 0,008 K0214.04203 42 M3 5 8 25 6 1000 0,010 K0214.05503 55 M3 5 8 25 6 1000 0,013 K0214.07603 76 M3 5 8 25 6 1000 0,015 K0214.08803 88 M3 5 8 25 6 1000 0,018 K0214.03204 32 M4 8 12,5 33 8 1000 0,028 K0214.05504 55 M4 8 12,5 33 8 1000 0,038 K0214.06404 64 M4 8 12,5 33 8 1000 0,041 K0214.08804 88 M4 8 12,5 33 8 1000 0,050 K0214.09604 96 M4 8 12,5 33 8 1000 0,056 K0214.09804 98 M4 8 12,5 33 8 1000 0,057 K0214.10204 102 M4 8 12,5 33 8 1000 0,058 K0214.12004 120 M4 8 12,5 33 8 1000 0,065 K0214.12804 128 M4 8 12,5 33 8 1000 0,068 K0214.13604 136 M4 8 12,5 33 8 1000 0,071 K0214.05505 55 M5 10 15 41 10 1000 0,067 K0214.08805 88 M5 10 15 41 10 1000 0,087 K0214.10005 100 M5 10 15 41 10 1000 0,094 K0214.10205 102 M5 10 15 41 10 1000 0,095 K0214.11505 115 M5 10 15 41 10 1000 0,103 K0214.12005 120 M5 10 15 41 10 1000 0,105 K0214.13605 136 M5 10 15 41 10 1000 0,112 K0214.18005 180 M5 10 15 41 10 1000 0,142 K0214.20005 200 M5 10 15 41 10 1000 0,154 K0214.23505 235 M5 10 15 41 10 1000 0,175 K0214.25005 250 M5 10 15 41 10 1000 0,184 253
K0215 Stirrup-shaped handles, in stainless steel stainless steel Form A front mounted Handle stainless steel 1.4305 Fasteners made of 1.4301 Ground and satin brushed finish. K0215.2001 These stainless steel pull hanles are ideal for all technical applications where highest load and high chemical or corrosive resistance is required. Form B rear mounted KIPP Stirrup-shaped handles, in stainless steel 254 Order No. Form A Load bearing Approx. capacity weight N K0215.2001 A 200 1000 1,035 K0215.2501 A 250 1000 1,157 K0215.2002 B 200 1000 1,035 K0215.2502 B 250 1000 1,157
K0216 All-purpose apparatus handles Form A serrated nut Aluminium connecting bridge; grip legs in glass-ball reinforced polyamide Grip legs, half-matt with fine structure, black; connecting bridge matt-finished and natural colour or black anodized K0216.10001 Form B view A-A serrated nut rung length = A + 12 mm KIPP All-purpose apparatus handles Order No. Order No. Form A L Load black anodized natural colour anodized bearing capacity N K0216.05501 K0216.05503 A 55 70 1000 K0216.08801 K0216.08803 A 88 103 1000 K0216.10001 K0216.10003 A 100 115 1000 K0216.12001 K0216.12003 A 120 135 1000 K0216.18001 K0216.18003 A 180 195 1000 K0216.23501 K0216.23503 A 235 250 1000 K0216.055101 K0216.055103 B 55 75 1000 K0216.088101 K0216.088103 B 88 108 1000 K0216.100101 K0216.100103 B 100 120 1000 K0216.120101 K0216.120103 B 120 140 1000 K0216.180101 K0216.180103 B 180 200 1000 K0216.235101 K0216.235103 B 235 255 1000 255
K0217 All-purpose apparatus handles Connecting bridge in aluminium; grip leg in high-strength plastic K0217.05501 bridge length = A KIPP All-purpose apparatus handles The centre distance can be adjusted by shortening the connecting bridge. Order No. Order No. A B Load Approx. connecting bridge connecting bridge bearing weight black anodized natural colour anodized capacity N K0217.05501 K0217.05503 55 69 1000 0,026 K0217.08801 K0217.08803 88 102 1000 0,030 K0217.10001 K0217.10003 100 114 1000 0,032 K0217.12001 K0217.12003 120 134 1000 0,035 K0217.18001 K0217.18003 180 194 1000 0,044 K0217.23501 K0217.23503 235 249 1000 0,053 K0218 Measurement device handles Form A fine ground and high gloss chrome-plated Form B same as form A, grip with smooth plastic sleeve Form C stainless steel, vibratory finished Steel or stainless steel 1.4305 Fine ground and high gloss chrome-plated; Form B grip with smooth plastic sleeve; Form C semi-matt, score-free vibratory finished K0218.1201 (folded out) Galvanized flat washers and nuts are supplied. Form C fastening material in stainless steel. Spring lock in both end positions. KIPP Measurement device handles 256 Order No. Order No. Order No. A Load Approx. Form A Form B Form C bearing weight capacity N K0218.1001 K0218.1002 K0218.1003 100 500 0,135 K0218.1201 K0218.1202 K0218.1203 120 500 0,160 K0218.1801 K0218.1802 K0218.1803 180 500 0,215
K0219 Angled draw-pull handles Aluminium Matt-finished, black anodized or natural colour anodized K0219.12001 KIPP Angled draw-pull handles Order No. Order No. A Load Approx. black anodized natural colour anodized bearing weight capacity N K0219.08601 K0219.08603 86 500 0,037 K0219.12001 K0219.12003 120 500 0,045 K0219.18001 K0219.18003 180 500 0,058 K0220 Bowed tube handles Form A connecting tube natural colour anodized Form B connecting tube black anodized Material, surface finish: Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium, anodized K0220.3002 The grip legs are pinned to the aluminium connecting tube. Black galvanized cylindrical screws with hexagon socket, nuts and washers are supplied. KIPP Bowed tube handles Order No. Order No. A Load Approx. Form A Form B bearing weight capacity N K0220.2001 K0220.2002 200 800 0,361 K0220.2501 K0220.2502 250 800 0,410 K0220.3001 K0220.3002 300 800 0,451 K0220.3501 K0220.3502 350 800 0,493 K0220.4001 K0220.4002 400 800 0,525 257
K0221 Tube handles Form A connecting tube ground and natural colour anodized KIPP Tube handles Form B connecting tube with serrated plastic cover Order No. Order No. A B Load Approx. Form A Form B bearing weight capacity N K0221.1801 K0221.1802 180 210 1000 0,170 K0221.2001 K0221.2002 200 230 1000 0,175 K0221.2501 K0221.2502 250 280 1000 0,190 K0221.3001 K0221.3002 300 330 1000 0,205 K0221.3501 K0221.3502 350 380 1000 0,220 K0221.4001 K0221.4002 400 430 1000 0,235 K0221.5001 K0221.5002 500 530 1000 0,270 K0221.6001 K0221.6002 600 630 1000 0,300 Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium EN AW-6060 K0221.3001 The grip legs have four clamping webs within the area of the tube receiver. When pushing the connecting tube in, they are abraded and produce a seat with a precise fit. Black galvanized fastening screws as well as suitable washers and nuts are supplied. K0222 Tube handles KIPP Tube handles 258 Form A connecting tube ground and natural colour anodized Form B connecting tube with serrated plastic cover Form C connecting tube in stainless steel, finely ground Order No. Order No. Order No. A B Load Form A Form B Form C bearing capacity N K0222.2501 K0222.2502 K0222.2503 250 294 1000 K0222.3001 K0222.3002 K0222.3003 300 344 1000 K0222.3501 K0222.3502 K0222.3503 350 394 1000 K0222.4001 K0222.4002 K0222.4003 400 444 1000 K0222.5001 K0222.5002 K0222.5003 500 544 1000 K0222.6001 K0222.6002 K0222.6003 600 644 1000 Grip legs in black glass-ball reinforced thermoplastic; connecting tube aluminium EN AW-6060 or stainless steel 1.4301 K0222.3501 The grip legs have four clamping webs within the area of the tube receiver. When pushing the connecting tube in, they are abraded and produce a seat with a precise fit. Black galvanized fastening screws as well as suitable washers and nuts are supplied.
K0223 Tube handles Form A Connecting tube, aluminium EN AW-6060; grip legs in glass-ball reinforced polyamide Connecting tube natural colour anodized or with serrated plastic cover K0223.150203 The grip legs have two/ four three-square PVC profiles within the area of the tube receiver. These three-square PVC profiles are abraded when the connecting tube is inserted (push fit). In this way an exact fit is generated. Black galvanized fastening screws as well as suitable washers and nuts are supplied. Form B KIPP Tube handles Order No. Order No. Form A L Load Approx. natural colour anodized serrated plastic cover bearing weight capacity N K0223.150203 K0223.150202 A 150 184 1000 0,118 K0223.200203 K0223.200202 A 200 234 1000 0,135 K0223.300203 K0223.300202 A 300 334 1000 0,167 K0223.400203 K0223.400202 A 400 434 1000 0,200 K0223.500203 K0223.500202 A 500 534 1000 0,232 K0223.150303 K0223.150302 B 150 200 1000 0,118 K0223.200303 K0223.200302 B 200 250 1000 0,135 K0223.300303 K0223.300302 B 300 350 1000 0,167 K0223.400303 K0223.400302 B 400 450 1000 0,200 K0223.500303 K0223.500302 B 500 550 1000 0,232 259
K0652 Tube handles in stainless steel stainless steel A + 15 mm 32 R 20 Connecting tube stainless steel 1.4301. Grip legs in precision cast G 4581. Fastening material in stainless steel 1.4301. Clamping and sealing rings in food-grade silicone rubber. Temperature resistant in the long-term from -60 C to +200 C. 5 M6 x 6 ø 30 x 1,5 A 25 60 M8 x 25 Connecting tube finely ground. Grip legs blasted and electro-polished with matt-gloss finish. K0652.200301 L 48 All-purpose pluggable tube handles in stainless steel. Splash-proof tube-leg connection. Additional tube clamping by means of a grub screw with a hexagon socket. For screw assembly in the front or from behind. Easy to clean, especially suitable for food industry. KIPP Tube handles in stainless steel 260 Order No. A L Load bearing capacity N K0652.200301 200 225 1000 K0652.250301 250 275 1000 K0652.300301 300 325 1000 K0652.350301 350 375 1000 K0652.400301 400 425 1000 K0652.500301 500 525 1000
K0224 Tube handles Tube holder and tube cap in glass-ball-reinforced polyamide; connecting tube aluminium EN AW-6060 Connecting tube finely ground and black anodized or natural colour anodized; tube holder and tube cap semi-matt with fine texture, black K0224.200061 Tear-out-resistant screw connection between handle holder and tube by non-releasing blind rivet nut. KIPP Tube handles Order No. Surface finish A L Load bearing Approx. capacity weight N K0224.200061 black anodized 200 288 800 0,211 K0224.250061 black anodized 250 338 800 0,228 K0224.300061 black anodized 300 388 800 0,245 K0224.400061 black anodized 400 488 800 0,280 K0224.500061 black anodized 500 588 800 0,315 K0224.200063 natural colour anodized 200 288 800 0,211 K0224.250063 natural colour anodized 250 338 800 0,228 K0224.300063 natural colour anodized 300 388 800 0,245 K0224.400063 natural colour anodized 400 488 800 0,280 K0224.500063 natural colour anodized 500 588 800 0,315 261
K0225 Tube handles Connecting tube stainless steel 1.4301; fastener die-cast aluminium; glass-ball reinforced end cap; screws and steel clamping device Connecting tube finely ground; fastener black powder-coated; end cap black; screws and clamping device galvanized and chromated K0225.0600101 High load rating tube handles for mechanical and process equipment engineering. Easy mounting of components from front side. Any screw distance possible for same handle length. clamping diagram, holder: KIPP Tube handles 262 Order No. A B E L Load Approx. bearing weight capacity N K0225.0600101 380 380 85 600 1000 1,847 K0225.0700101 480 480 85 700 1000 2,029 K0225.0800101 500 500 125 800 1000 2,212 K0225.0900101 600 600 125 900 1000 2,395 K0225.1000101 700 700 125 1000 1000 2,577
K0226 Tube handles Grip legs in glass-ball reinforced thermoplastic; connecting tube stainless steel 1.4301; inserts stainless steel 1.4305 screw head insert or threaded insert Grip legs with fine structure, black; connecting tubes, finely ground; inserts, finely lathed Form A screw head insert Form B threaded insert K0226.300101 Precision fit of tube on plastic tenon due to clamping webs. Splash-proof by o-rings. Different fastening inserts allow screwing on from the front, from the rear or one with the other (as a double handle). Handles with screw head insert are supplied with fastening material in refined steel. Handles with threaded insert are supplied without screws. KIPP Tube handles Order No. Form A L Load bearing Approx. capacity weight N K0226.300101 A 300 350 1000 0,853 K0226.350101 A 350 400 1000 0,934 K0226.400101 A 400 450 1000 1,016 K0226.500101 A 500 550 1000 1,179 K0226.600101 A 600 650 1000 1,341 K0226.300102 B 300 350 1000 0,813 K0226.350102 B 350 400 1000 0,894 K0226.400102 B 400 450 1000 0,976 K0226.500102 B 500 550 1000 1,139 K0226.600102 B 600 650 1000 1,301 263
K0227 Tube handles in stainless steel stainless steel Form A front mounted Form B rear mounted M8x35 A-80 mm 22 Ø20x2 A A-80 mm Ø20x2 16 50 50 29 22 Connecting tube and fasteners made of stainless steel 1.4301, Handle shank precision cast 1.4581 Connecting tube finely ground or with ribbed black plastic sleeve. Shanks abrasive cleaned and matt gloss electropolished. K0227.200081 Socket head screws with nuts and washers are supplied for tube handles Form A. Hexagon head screws and suitable washers are supplied for tube handles Form B. A M8x20 29 26 L 53 KIPP Tube handles in stainless steel 264 Order No. Form Surface finish A L Load Approx. bearing weight capacity N K0227.200081 A tube ground 200 226 1000 0,680 K0227.300081 A tube ground 300 326 1000 0,775 K0227.400081 A tube ground 400 426 1000 0,865 K0227.200082 A tube with plastic cover 200 226 1000 0,680 K0227.300082 A tube with plastic cover 300 326 1000 0,775 K0227.400082 A tube with plastic cover 400 426 1000 0,865 K0227.200083 B tube ground 200 226 1000 0,710 K0227.300083 B tube ground 300 326 1000 0,800 K0227.400083 B tube ground 400 426 1000 0,900 K0227.200084 B tube with plastic cover 200 226 1000 0,710 K0227.300084 B tube with plastic cover 300 326 1000 0,800 K0227.400084 B tube with plastic cover 400 426 1000 0,900
K0228 Machine handles view A-A Grip leg and connecting bridge in aluminium EN AW-6060; connecting pins in stainless steel Grip leg and connecting bridge finely ground, black anodized or natural colour anodized KIPP Machine handles Order No. Order No. A L Load Approx. black anodized natural colour anodized bearing weight capacity N K0228.250081 K0228.250083 250 274 1000 0,555 K0228.300081 K0228.300083 300 324 1000 0,618 K0228.400081 K0228.400083 400 424 1000 0,742 K0228.500081 K0228.500083 500 524 1000 0,867 K0228.600081 K0228.600083 600 624 1000 0,992 K0228.250081 The solid construction also permits this handle series to be used as edge protection. K0229 Control panel handles KIPP Control panel handles Order No. A D Load Approx. Order No. bearing weight end washer capacity N K0229.20016 200 16 1000 0,240 K0229.16 K0229.25016 250 16 1000 0,270 K0229.16 K0229.30016 300 16 1000 0,300 K0229.16 K0229.40016 400 16 1000 0,350 K0229.16 K0229.50018 500 18 1000 0,520 K0229.18 Round aluminium EN AW-6060 Ground, glass-ball blasted and matt-polish black anodized K0229.20016 End washers not included. On request: Any handle length. 265
K0230 Machine handles Form A Round steel Ground, brushed and matt-finish chromium-plated or black powder-coated with fine texture K0230.20081 Available as simple stirrup-shaped handle or angled. Form B KIPP Machine handles 266 Order No. Form Surface finish A Load bearing Approx. capacity weight N K0230.200081 A matt-finished chromium-plated 200 1000 1,150 K0230.350081 A matt-finished chromium-plated 350 1000 1,525 K0230.200082 A black powder-coated 200 1000 1,150 K0230.350082 A black powder-coated 350 1000 1,525 K0230.200083 B matt-finished chromium-plated 200 1000 0,680 K0230.250083 B matt-finished chromium-plated 250 1000 0,810 K0230.300083 B matt-finished chromium-plated 300 1000 0,930 K0230.350083 B matt-finished chromium-plated 350 1000 1,060 K0230.200084 B black powder-coated 200 1000 0,680 K0230.250084 B black powder-coated 250 1000 0,810 K0230.300084 B black powder-coated 300 1000 0,930 K0230.350084 B black powder-coated 350 1000 1,060
K0231 Bighand view A-A Secure gripping with the Novo Grip Bighand. This design supports the tailor-made gripping position and its universal alteration of handle orientation takes the requirements of application masterly into account. Material, surface finish: Rhombus shaped end pieces in anthracite grey thermoplastic, oval tube in aluminum, coated or anodized K0231.118070 (oval tube colour raspberry red) The diamond corner covers are supplied unassembled. Optional supply: set of M10 bolts for mounting options 1+2, a set of wood screws diameter, M5 with dowel, a drill template and assembly tool for option 3. Δ Add the desired colour code here. No colour code is required with anthracite grey oval tubes. On request: Length A in stepped special lengths. colour codes: anthracite grey RAL 7021 anodized black = 01 anodized natural = 03 ruby red = 27 RAL 3003 raspberry red = 70 RAL 3027 ocean blue = 73 RAL 5020 KIPP Bighand Order No. Order No. A Variation 1+2 Variation 3 Socket head screw DIN 912 Hexagonal-woodsrcew DIN 571 K0231.1180Δ K0231.118011Δ 180 K0231.1200Δ K0231.120011Δ 200 K0231.1250Δ K0231.125011Δ 250 K0231.1300Δ K0231.130011Δ 300 K0231.1350Δ K0231.135011Δ 350 K0231.1400Δ K0231.140011Δ 400 K0231.1500Δ K0231.150011Δ 500 K0231.1600Δ K0231.160011Δ 600 Mounting variations variation 1 variation 2 variation 3 267
K0232 Ledge handles Form A L 12 22 Profile aluminium EN AW-6060. Profile aluminium vibration ground, matt-finished and natural colour or black anodized. 8 16 K0232.10301 M4 A 7,5 All-purpose ledge handles. Form A can also serve as an excellent edge protection. 8 On request: Any other lengths. M4 Form B A 7,5 8 25 26 8 L KIPP Ledge handles Order No. Order No. Form A L Load Approx. natural colour anodized black anodized bearing weight capacity N 268 K0232.10301 K0232.10302 A 30 45 200 0,027 K0232.10451 K0232.10452 A 45 60 200 0,034 K0232.10701 K0232.10702 A 70 85 200 0,054 K0232.10901 K0232.10902 A 90 105 200 0,063 K0232.11051 K0232.11052 A 105 120 200 0,072 K0232.11201 K0232.11202 A 120 135 200 0,081 K0232.20301 K0232.20302 B 30 45 200 0,032 K0232.20451 K0232.20452 B 45 60 200 0,035 K0232.20701 K0232.20702 B 70 85 200 0,055 K0232.20901 K0232.20902 B 90 105 200 0,080 K0232.21051 K0232.21052 B 105 120 200 0,093 K0232.21201 K0232.21202 B 120 135 200 0,106
K0130 Angled handles Form A natural anodized Form B black anodized Profile aluminium EN AW-6060; end caps in black thermoplastic Profile aluminium matt-polished anodized K0130.3001 Among other things, angled handles are used for sliding doors and technical installations. As an alternative, this handle is also suitable as edge protection. middle tapped hole only L > 400 mm KIPP Angled handles Order No. Form L M Load bearing capacity N K0130.1501 A 150 110 1000 K0130.2001 A 200 160 1000 K0130.2501 A 250 210 1000 K0130.3001 A 300 260 1000 K0130.3501 A 350 310 1000 K0130.4001 A 400 360 1000 K0130.1502 B 150 110 1000 K0130.2002 B 200 160 1000 K0130.2502 B 250 210 1000 K0130.3002 B 300 260 1000 K0130.3502 B 350 310 1000 K0130.4002 B 400 360 1000 K0130.5002 B 500 460 1000 K0130.6002 B 600 560 1000 269
K0233 Ledge handles in stainless steel stainless steel Profile in refined steel, stainless steel 1.4404 Blasted and electro-polished with matt-gloss finish K0233.06006 On request: Any other lengths. view A-A KIPP Ledge handles in stainless steel 270 Order No. A L Load bearing Approx. capacity weight N K0233.06006 60 80 1000 0,248 K0233.08006 80 100 1000 0,310 K0233.10006 100 120 1000 0,373 K0233.13006 130 150 1000 0,467
K0234 Angled profile handles Form A Profile aluminium EN AW-6060 Profile aluminium matt-polish anodized K0234.086061 Angled profile handles are available with internal thread M6 or with through hole for M5 countersunk screws for side mounting. Form B KIPP Angled profile handles Order No. Form Surface finish A L Load Approx. bearing weight capacity N K0234.086061 A black anodized 86 106 500 0,189 K0234.100061 A black anodized 100 120 500 0,203 K0234.120061 A black anodized 120 140 500 0,233 K0234.086063 A natural colour anodized 86 106 500 0,189 K0234.100063 A natural colour anodized 100 120 500 0,203 K0234.120063 A natural colour anodized 120 140 500 0,233 K0234.086051 B black anodized 86 106 500 0,189 K0234.100051 B black anodized 100 120 500 0,203 K0234.120051 B black anodized 120 140 500 0,233 K0234.086053 B natural colour anodized 86 106 500 0,189 K0234.100053 B natural colour anodized 100 120 500 0,203 K0234.120053 B natural colour anodized 120 140 500 0,233 271
K0131 Machine handles Form A Form B Grip legs and connecting bridge in aluminium profile EN AW-6060; connecting pins in refined steel Grip legs glass-ball blasted and semi-matt finish black anodized: connecting bridge matt-finished and natural colour anodized, black anodized or titan colour powder-coated K0131.2000811 Form C The machine handles are characterized by solid construction and high load rating. Hexagon head screws M8x16, DIN 933 galvanized and flat washers DIN EN ISO 7089 galvanized are supplied. KIPP Machine handles, Form A 272 Order No. Order No. Order No. A L Load Approx. connecting bridge connecting bridge connecting bridge bearing weight black anodized titan colour powder-coated natural colour anodized capacity N K0131.2000811 K0131.2000812 K0131.2000813 200 230 1000 0,555 K0131.3000811 K0131.3000812 K0131.3000813 300 330 1000 0,690 K0131.4000811 K0131.4000812 K0131.4000813 400 430 1000 0,824 K0131.5000811 K0131.5000812 K0131.5000813 500 530 1000 0,959 KIPP Machine handles, Form B Order No. Order No. Order No. A L Load Approx. connecting bridge connecting bridge connecting bridge bearing weight black anodized titan colour powder-coated natural colour anodized capacity N K0131.2000821 K0131.2000822 K0131.2000823 200 230 1000 0,509 K0131.3000821 K0131.3000822 K0131.3000823 300 330 1000 0,657 K0131.4000821 K0131.4000822 K0131.4000823 400 430 1000 0,778 K0131.5000821 K0131.5000822 K0131.5000823 500 530 1000 0,913 KIPP Machine handles, Form C Order No. Order No. Order No. A L Load Approx. connecting bridge connecting bridge connecting bridge bearing weight black anodized titan colour powder-coated natural colour anodized capacity N K0131.2000831 K0131.2000832 K0131.2000833 200 216 1000 0,479 K0131.3000831 K0131.3000832 K0131.3000833 300 316 1000 0,614 K0131.4000831 K0131.4000832 K0131.4000833 400 416 1000 0,748 K0131.5000831 K0131.5000832 K0131.5000833 500 516 1000 0,882
K0132 Angled leg handles Grip legs EN AW-6060, extruded; leg insert, glass-ball reinforced thermoplastic; connecting tube EN AW-6060 Grip legs, matt-polish black anodized; leg insert, black; connecting tube, finely ground and anodized or powder-coated or with serrated plastic cover, black grip insert K0132.3001 The components of the insert system shown can be supplied as complete handles or as preassembled grip and connecting legs for tube orders by customers. The connection between leg and connecting tube is splash-proof and absolutely tight. On request: Angled leg handles with connecting part (when larger distance between grip legs). KIPP Angled leg handles Order No. Order No. Order No. Order No. A L Load connecting tube connecting tube connecting tube Connecting tube bearing natural colour anodized black anodized black powder-coated black serrated plastic cover capacity N K0132.2001 K0132.2002 K0132.2003 K0132.2004 200 225 1000 K0132.2501 K0132.2502 K0132.2503 K0132.2504 250 275 1000 K0132.3001 K0132.3002 K0132.3003 K0132.3004 300 325 1000 K0132.3501 K0132.3502 K0132.3503 K0132.3504 350 375 1000 K0132.4001 K0132.4002 K0132.4003 K0132.4004 400 425 1000 K0132.5001 K0132.5002 K0132.5003 K0132.5004 500 525 1000 K0132.6001 K0132.6002 K0132.6003 K0132.6004 600 625 1000 273
K0235 Angled leg handles A-8 mm R7 Connecting tube in aluminium EN AW-6060 or stainless steel 1.4301; grip leg in polyamide, glass-ball reinforced; threaded bush in brass 33 Connecting tube natural colour, black anodized or finely ground stainless steel; grip leg matt black M4 6 12 12 K0235.088041 A 17 Precision fit of tube on plastic grip leg due to clamping webs. Ø12x1 B KIPP Angled leg handles 274 Order No. Surface finish A B Load Approx. bearing weight capacity N K0235.088041 natural colour anodized 88 100 200 0,028 K0235.096041 natural colour anodized 96 108 200 0,029 K0235.120041 natural colour anodized 120 132 200 0,031 K0235.128041 natural colour anodized 128 140 200 0,033 K0235.160041 natural colour anodized 160 172 200 0,035 K0235.180041 natural colour anodized 180 192 200 0,037 K0235.088042 black anodized 88 100 200 0,028 K0235.096042 black anodized 96 108 200 0,029 K0235.120042 black anodized 120 132 200 0,031 K0235.128042 black anodized 128 140 200 0,033 K0235.160042 black anodized 160 172 200 0,035 K0235.180042 black anodized 180 192 200 0,037 K0235.088043 stainless steel 88 100 200 0,042 K0235.096043 stainless steel 96 108 200 0,044 K0235.120043 stainless steel 120 132 200 0,051 K0235.128043 stainless steel 128 140 200 0,053 K0235.160043 stainless steel 160 172 200 0,062 K0235.180043 stainless steel 180 192 200 0,067
K0236 Apparatus handles B 12 Connecting bridge in aluminium EN AW-6060; grip leg in polyamide glass-ball reinforced; threaded bush in brass 37 Connecting bridge finely ground and natural colour or black anodized; grip leg aluminium colour or black 10 K0236.1055041 M4 A 10 Connecting bridge and grip leg are firmly screwed with each other. KIPP Apparatus handles Order No. Order No. Order No. Order No. A B Load Connecting bridge natural colour Connecting bridge natural colour Connecting bridge black Connecting bridge black bearing anodized, grip leg aluminium colour anodized, grip leg black anodized, grip leg aluminium colour anodized, grip leg black capacity N K0236.1055041 K0236.1055042 K0236.1055043 K0236.1055044 55 67 300 K0236.1088041 K0236.1088042 K0236.1088043 K0236.1088044 88 100 300 K0236.1100041 K0236.1100042 K0236.1100043 K0236.1100044 100 112 300 K0236.1120041 K0236.1120042 K0236.1120043 K0236.1120044 120 132 300 K0236.1180041 K0236.1180042 K0236.1180043 K0236.1180044 180 192 300 275
K0237 Plastic handles Glass-ball reinforced thermoplastic; fastening material 1.4301 Matt black with fine texture K0237.12805 locking plate The plastic handles can be used for one-sided mounting. They are also dimensionally stable and have a high load rating. Fastening bolts, nuts and flat washers are supplied as well as a clamping plate for extra torsion protection. KIPP Plastic handles 276 Order No. A B D D1 H L L1 T Load Approx. bearing weight capacity N K0237.12805 17 30 M5x45 20 48 128 18 33 800 0,106 K0237.15606 20 36 M6x55 24 58 156 22 40 1000 0,186
K0238 Tray handles only Form B for DIN 963/964/966-M4 rubber profile rubber profile height of mounting cutout Tray handle in aluminium profile, end caps polyamide; Form A: mounting by rubber profile Form B: mounting by 2 countersunk screws, steel Tray handle glass-ball blasted, satin finish and black anodized or natural colour anodized; rubber profile black; fastening screws galvanized K0238.10011 The tray handles Form A can be used without screw mounting with sheet strengths of 1-2.5 mm. Two rubber profiles ensure absolutely firm mounting. The tray handles Form B can be mounted from outside with 2 countersunk screws. Two cross-slots offset by 90 for M4 screws allow earth/ground connection and can serve as a mounting aid for additional add-on parts. installation mounting cutout Assembly: After fitting the lower rubber profile, press the two side caps onto the tray handle. Next press the handle over the lower edge of the mounting cutout at a 45 angle and then hold it against the housing panel. Now push the 2nd rubber profile into the upper groove or mount it with 2 countersunk screws. for Form B Ø 4.5 (M4) KIPP Tray handles Order No. Order No. Form L Mounting cutout Load Approx. tray handle black anodized tray handle natural colour anodized bearing weight capacity N K0238.10011 K0238.10013 A 100 104 x 73 500 0,107 K0238.11811 K0238.11813 A 118 122 x 73 500 0,126 K0238.16711 K0238.16713 A 167 171 x 73 500 0,178 K0238.10021 K0238.10023 B 100 104 x 73 500 0,107 K0238.11821 K0238.11823 B 118 122 x 73 500 0,126 K0238.16721 K0238.16723 B 167 171 x 73 500 0,178 277
K0239 Profile folding handles only Form B for DIN 963/964/966-M4 Tray and folding handle in aluminium profile, end caps polyamide; Form A: mounting by rubber profile Form B: mounting by 2 countersunk screws, steel Tray and folding handle glass-ball blasted, satin finish and black anodized or natural colour anodized; rubber profile black, fastening screws galvanized K0239.10011 installation mounting cutout height of mounting cutout rubber profile stop profile rubber profile Profile folding handles Form A can be fitted without screw mounting with 2 soft plastic profiles for sheet thickness 1-2.5 mm. Profile folding handles Form B can be mounted from outside with 2 countersunk screws. Two cross-slots for M4 screws allow earthing connection and can serve as a mounting aid for additional parts. Assembly: After fitting the lower rubber profile, press the two side caps onto the tray handle. Next press the handle over the lower edge of the mounting cutout at a 45 angle and then hold it against the housing panel. Now push the 2nd rubber profile into the upper groove or mount it with 2 countersunk screws. for Form B Ø 4.5 (M4) KIPP Profile folding handles Order No. Order No. Form L Mounting cutout Load Approx. tray and folding handle tray and folding handle bearing weight black anodized natural colour anodized capacity N K0239.10011 K0239.10013 A 100 107 x 73 500 0,273 278 K0239.11811 K0239.11813 A 118 125 x 73 500 0,320 K0239.16711 K0239.16713 A 167 174 x 73 500 0,433 K0239.10021 K0239.10023 B 100 107 x 73 500 0,273 K0239.11821 K0239.11823 B 118 125 x 73 500 0,320 K0239.16721 K0239.16723 B 167 174 x 73 500 0,433
K0240 Folding tray handles Form A handle snaps both into working and resting positions Form B handle swivels back automatically into resting position A A1 B Die cast aluminium Tray and handle black or light grey powder-coated, semi-matt K0240.05018411 2 4,5 A2 20,5 A2 Ø 4,3 X Y1 ±0,2 Y H H1 for countersunk screws M4 H2 With their modern design, folding tray handles can be used wherever solid and attractive handles are required. Folding tray handles Form A snap into both resting and working positions. Folding tray handles Form B swivel back into its resting position automatically after use. Assembly: The folding tray handles can be installed behind or in front of the housing panel with the same housing cutout. mounting cutout X1 ±0,2 KIPP Folding tray handles Order No. Form Surface finish A A1 A2 B H H1 H2 X X1 Y Y1 Load Approx. bearing weight capacity N K0240.07911811 A black powder-coated 130 118 109 48 91 79 69 110 118 70,5 79 500 0,197 K0240.05018411 A black powder-coated 200 184 170 51 80 50 72 171 184 73 50 500 0,286 K0240.07911812 A light grey powder-coated 130 118 109 48 91 79 69 110 118 70,5 79 500 0,197 K0240.05018412 A light grey powder-coated 200 184 170 51 80 50 72 171 184 73 50 500 0,286 K0240.07911821 B black powder-coated 130 118 109 48 91 79 69 110 118 70,5 79 500 0,197 K0240.05018421 B black powder-coated 200 184 170 51 80 50 72 171 184 73 50 500 0,286 K0240.07911822 B light grey powder-coated 130 118 109 48 91 79 69 110 118 70,5 79 500 0,197 K0240.05018422 B light grey powder-coated 200 184 170 51 80 50 72 171 184 73 50 500 0,286 279
18 77 M6 K0241 Measurement device handle 154 71 Holder and grip glass-ball reinforced thermoplastic. Shaft and return springs in stainless steel. 120 80 12 18 35 matt black. K0241.080181 R 17 R 17 Measurement device handle is automatically resilient. It can be screwed onto the housing panel. Black galvanized countersunk screws with a cross recess M6x30 DIN 965, as well as suitable washers and nuts are supplied. KIPP Measurement device handle 280 Order No. Load bearing capacity N K0241.080181 300
K0242 Trough grips A 25 8 Glass-ball reinforced thermoplastic Semi-matt, black or light grey K0242.1082041 61 33 These ergonomically shaped trough grips are ideally suited for wall thickness of 1-5 mm. for countersunk screw M4 B B1 1-5 mm Assembly: The handle has to be inserted in the cutout of the housing panel and then mounted from front side with 2 countersunk screws (not included). mounting cutout A B1+1 mm 48 22 4,3 KIPP Trough grips Order No. Colour A B B1 Load bearing Approx. capacity weight N K0242.1082041 black 82 100 67 1000 0,044 K0242.1112041 black 112 130 97 1000 0,056 K0242.1082042 light grey 82 100 67 1000 0,044 K0242.1112042 light grey 112 130 97 1000 0,056 281
K0243 Fitting grip in stainless steel stainless steel Form A mounting cutout Stainless steel 1.4301 120 5,5 22 20 6 6x60 (= 360 ) High-electro-polished finish 62 K0243.1120000 40 Stainless steel retractable grips with marginal installation depth. For base and mounting plates or drawers. With return spring. According to operation, the grip automatically swivels back into its resting position after use. 75 1,5 98 107 107 Form B 75 60 10 34 mounting cutout 60 58 43 26 48 8 R20 4 46 1 63 KIPP Fitting grip in stainless steel 282 Order No. Form Load bearing Approx. capacity weight N K0243.1120000 A 200 0,213 K0243.2075058 B 200 0,051
K0244 Machine handles view A-A A 73 ±1 65 ±1 6 Glass-ball reinforced thermoplastic PA Black A Ø 8,5 28 K0244.100081 K0244.1 (1 packaging unit = 2 pieces) 14 Machine handles with ergonomic shape and reach-through protection for the hands. For installation on doors, flaps and aluminium profiles. Ideal for double-winged retractable doors. Fasten with hexagonal or socket head screw M8. 100 ±0,5 L ±1 Covering caps are not included in delivery. A 100-1 80-1 4,5 12,5 Ø 8,8 38-1 19 view A-A A 13,2 198 ±0,4 L ±1 KIPP Machine handles Order No. L Load bearing Approx. Order No. capacity weight cover caps N K0244.100081 134 1000 0,114 K0244.1 K0244.198081 236 1000 0,356 K0244.3 283