Technical Guide C Windows C Technical Guide C1
Product Features Specifications Styles Traditional, Push Out and Mission options. Standard Features Natural, clear Douglas Fir interior (no visible finger joints) 4 9/16 (116 mm) jamb construction LowE insulated glazing with 1/2 (13 mm) airspace Roto gear operator and concealed sash locks Extruded aluminum cladding in a variety of standard colors, primed wood or clear fir exterior Flexible continuous weatherstrip system Insect screens Metal handle, cover and locks Hardware Multiple hardware type and finish choices are available. See the Hardware in section A for more information. HARDWARE STYLES Folding Crank Handle Push Out Handle Multipoint Lock Electric Operator FINISH OPTIONS: REFER TO SECTION A. Glazing LowE Double, LowE Triple and StormForce. StormForce is not available on all products. Simulated Divided Lites (SDL) Ogee Profile 3/4 (19 mm), 1 1/8 (30 mm), 2 (51 mm) Putty Profile 5/8 (16 mm), 7/8 (22 mm), 1 1/8 (30 mm), 2 (51 mm) Square Profile (interior only) 3/4 (19 mm), 7/8 (22 mm), 1 1/8 (30 mm), 2 (51 mm) Casing Wood: 2 (51 mm) Brickmould, 3 1/2 (89 mm) Flat, 5 1/2 (139 mm) Flat, Adams and Williamsburg. Metal Clad: 2 (51 mm) Brickmould, 3 1/2 (89 mm) Flat, 2 clad frame extension, Nose & Cove, Adams, Williamsburg and Contemporary. Metal Clad Color Spectrum All Palette colors, including anodized finishes. Available in Cyprium Collection. LEGEND: Standard Optional Push Out VARIABLES Function: Use for Egress Push Out Available with Screen Concealed Hardware Durability: Low Maintenance Metal Clad Exterior Clear Douglas Fir Exterior Finish Clear Mahogany Exterior Finish Primed Exterior Finish Cyprium Collection Performance: LowE Double LowE Triple StormForce Appearance: SDL Push Out 2 Standards Most units have been tested by an independent laboratory for air and water infiltration, structural performance, and thermal performance requirements. Frame & Sash Manufactured from Coastal Douglas Fir kiln-dried lumber with frame construction designed for 4 9/16 (116 mm) jamb. All wood exterior components are factory primed unless specified as clear exterior. Minor scratches or abrasions in the wood surface or primer are not considered defects. Alternate Species The entire Loewen product line is also available in optional Mahogany. Preservative Treated All wood parts are dipped in approved preservative. Glazing With countless glazing configurations and LowE coating options, we ensure that you can choose the perfect blend of protection and comfort. Insulating Glass Double or triple glass configurations with 1/2 (13 mm) airspace. LowE Systems LowE best describes the benefits of the product that incorporates glazing coatings and Argon gas. LowE systems help reduce heating and cooling costs, providing superior energy efficiency. Simulated Divided Lites (SDL) Standard SDL complete with airspace grilles, where available. Grille bars are permanently applied to the interior and exterior. Hardware Option Operator and sash locks are available in a variety of finishes. See section A. Metal Cladding Heavy duty exterior metal cladding comprised of extruded aluminum is available in a variety of Palette colors, including anodized and Cyprium (copper and bronze cladding). Interior of window can be natural wood (unfinished) or primed. Metal clad units are supplied ready-to-install complete with integral metal nailing flange. Hardware Standard awning operator detaches at the sash allowing it to open out to 90 degrees for ease of cleaning. The roto gear operator will hold the sash at any position in its operating radius. The sash is supported by concealed heavy-duty hinges. All awning unitsare supplied with dual sash locks for added security and tighter seal. All steel components are coated for superior corrosion protection. Double Weatherstrip The combination of a continuous, flexible foam weatherstrip and a flexible automotive type bulb weatherstrip ensures maximum energy efficiency and protection against air and water infiltration. Screen Screens available in bronze, linen, Tuscany brown, brushed aluminum or black aluminum frame, screened with anti-glare fiberglass cloth. Wood-framed screens and High Transparency mesh available. Optional Retractable Screen and Swinging Screen available. Swinging Screen available on Push Out models only. Egress Consult local building codes for confirmation of size requirements for your area. Special egress hardware is available for Casement windows, which enables some sizes to meet egress codes, eliminating the need to go to the next larger size window. Consult your Authorized Loewen Dealer for more details. Visit the Loewen Photo Gallery online at www.loewen.com for a large collection of Loewen product and elevation photography. Numerous custom window configuration opportunities exist please contact your Authorized Loewen Dealer. Specifications and technical information are subject to change without notice. Imperial and metric measurements are converted accurately. However, in some cases, industry standards cause a 1 mm variance. (Example: 3/ is shown as 19 mm for all glass measurements.) Cad Download: www.loewen.com/architect Installation Instructions: www.loewen.com C2 Technical Guide Technical Guide C3
1 Wide Window Sizes 2 Wide Window Sizes Width Width Rough Opening 20 7/16 [519] 24 3/8 [619] 28 5/16 [719] 30 1/4 [769] 32 1/4 [819] 36 3/16 [919] [1067] 3/4 Rough Opening 3/4 79 1/2 [2019] 83 1/4 [2134] 95 1/4 [2419] 111 [2819] 118 7/8 [3019] 126 3/4 [3219] 1 1/2 [3619] Frame 19 [500] 23 5/8 [600] 27 9/16 [700] 29 1/2 [750] 31 1/2 [800] 35 7/16 [900] [10] [1200] Frame [1200 78 3/4 [2000] 82 1/2 [2096] 94 1/2 [2400] 110 1/4 [2800] 118 1/8 [3000] 126 [3200] 141 3/4 [3600] Wood Exterior Metal Clad Visible Glass 13 [347] 17 5/8 [447] 21 9/16 [547] 23 1/2 [7] 25 1/2 [647] 29 7/16 [747] 33 3/8 [ 847] 35 1/4 [895] [1047] 49 1/8 [1247] 53 1/16 [1347] 56 [1447] 64 [1647] Wood Exterior Metal Clad Visible Glass 13 [347] 17 5/8 [447] 21 9/16 [547] 23 1/2 [7] 25 1/2 [647] 29 7/16 [747] 33 3/8 [847] 35 1/4 [895] [1047] 49 1/8 [1247] 53 1/16 [1347] 56 [1447] 64 [1647] 17 3/16 [436] 16 1/2 [419] 15 3/4 [400] 9 1/2 [2] 0504 0604 0704 7504 0804 0904 1004 1104 1204 1404 1504 1604 1804 17 3/16 [436] 16 1/2 [419] 15 3/4 [400] 9 1/2 [2] 1004 1204 1404 1504 1604 1804 2004 2204 2404 2804 3004 3204 3604 21 1/8 [536] 20 7/16 [519] 19 [500] 13 7/16 [3] 0505 0605 0705 7505 0805 0905 1005 1105 1205 1405 1505 1605 1805 21 1/8 [536] 20 7/16 [519] 19 [500] 13 7/16 [3] 1005 1205 1405 1505 1605 1805 2005 2205 2405 2805 3005 3205 3605 25 1/16 [6] 24 3/8 [619] 23 5/8 [600] 17 3/8 [4] 0506 0606 0706 7506 0806 0906 1006 1106 1206 1406 1506 1606 1806 25 1/16 [6] 24 3/8 [619] 23 5/8 [600] 17 3/8 [4] 1006 1206 1406 1506 1606 1806 2006 2206 2406 2806 3006 3206 3606 29 [736] 28 5/16 [719] 27 9/16 [700] 21 5/16 [5] 0507 0607 0707 7507 0807 0907 1007 1107 1207 1407 1507 1607 * 1807 29 [736] 28 5/16 [719] 27 9/16 [700] 21 5/16 [5] 1007 1207 1407 1507 1607 1807 2007 2207 2407 2807 3007 3207 * 3607 30 [786] 30 1/4 [769] 29 1/2 [750] 23 5/16 [2] 0575 0675 0775 7575 0875 0975 1075 1175 1275 1475 1575 1675 * 1875 30 [786] 30 1/4 [769] 29 1/2 [750] 23 5/16 [2] 1075 1275 1475 1575 1675 1875 2075 2275 2475 2875 3075 3275 * 3675 32 [836] 32 1/4 [819] 31 1/2 [800] 25 1/4 [6] 0508 0608 0708 7508 0808 0908 1008 1108 1208 1408 1508 1608 * 1808 32 [836] 32 1/4 [819] 31 1/2 [800] 25 1/4 [6] 1008 1208 1408 1508 1608 1808 2008 2208 2408 2808 3008 3208 * 3608 Height 36 7/8 [936] 40 [1036] 36 3/16 [919] 35 7/16 [900] 29 3/16 [7] 33 1/8 [8] 0509 0510 0609 0610 0709 0710 7509 7510 0809 0810 0909 0910 1009 1010 1109 1110 1209 1210 1409 1410 1509 1510 1609 1610 * 1809 1810 Height 36 7/8 [936] 40 [1036] 36 3/16 [919] 35 7/16 [900] 29 3/16 [7] 33 1/8 [8] 1009 1010 1209 1210 1409 1410 1509 1510 1609 1610 1809 1810 2009 2010 2209 2210 2409 2410 2809 2810 3009 3010 3209 3210 * 3609 3610 [1084] [1067] [10] 35 1/16 [890] 0511 0611 0711 7511 0811 0911 1011 1111 1211 1411 1511 1611 1811 [1084] [1067] [10] 35 1/16 [890] 1011 1211 1411 1511 1611 1811 2011 2211 2411 2811 3011 3011 3611 [1236] [1200] 41 [10] 0512 0612 0712 7512 0812 0912 1012 1112 1212 1412 1512 1612 * 1812 [1236] [1200] 41 [10] 1012 1212 1412 1512 1612 1812 2012 2212 2412 2812 3012 3212 * 3612 56 9/16 [1436] 7/8 [12] * 0514 * 0614 * 0714 * 7514 * 0814 * 0914 * 1014 * 1114 * 1214 * 1414 * 1514 * 1614 * 1814 56 9/16 [1436] 7/8 [12] * 1014 * 1214 * 1414 * 1514 * 1614 * 1814 * 2014 * 2214 * 2414 * 2814 * 3014 * 3214 * 3614 60 1/2 [1536] 52 [13] * 0515 * 0615 * 0715 * 7515 * 0815 * 0915 * 1015 * 1115 * 1215 * 1415 * 1515 * 1615 60 1/2 [1536] 52 [13] * 1015 * 1215 * 1415 * 1515 * 1615 * 1815 * 2015 * 2215 * 2415 * 2815 * 3015 * 3215 64 7/16 [16] 3/4 56 3/4 [14] * 0516 * 0616 * 0716 * 7516 * 0816 * 0916 * 1016 * 1116 * 1216 * 1416 * 1516 * 1616 64 7/16 [16] 3/4 56 3/4 [14] * 1016 * 1216 * 1416 * 1516 * 1616 * 1816 * 2016 * 2216 * 2416 * 2816 * 3016 * 3216 75 5/16 [1836] 64 5/8 [16] * 0518 * 0618 * 0718 * 7518 * 0818 * 0918 * 1018 * 1118 * 1218 * 1418 * 1518 72 5/16 [1836] 64 5/8 [16] * 1018 * 1218 * 1418 * 1518 * 1618 * 1818 * 2018 * 2218 * 2418 * 2818 * 3018 New oversized CA operator up to CA1 1224 watch for sizes where temp, tri roto only sash, sash stabilizer etc. are read rectanguler Product Code Glass Size = Visible Glass + (24 mm) New oversized CA operator up to CA1 1224 watch for sizes where temp, tri roto only sash, sash stabilizer etc. are read rectanguler Product Code Glass Size = Visible Glass + (24 mm) Standard sizes Shown. Additional sizes may be available. Custom sizes can be ordered. Standard sizes Shown. Additional sizes may be available. Custom sizes can be ordered. Available with Mission sash. For a unit with a Mission sash, subtract 13/1 (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. For Masonry opening information see page A24-A29. Sizes are shown as double glazing, not all sizes may be available in triple glazing. Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: Meets US Egress: 20" in width, 2 in height, with a total egress area of 5.7 Sq Ft Meets Canadian Egress: 15 in width, 15" in height, with a total egress area of 3.8 Sq Ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer. Available with Mission sash. For a unit with a Mission sash, subtract 13/1 (21 mm) from the vertical visible glass measurement. SDL/Grille patterns are dependent on SDL/Grille type and window size. Please verify SDL/Grille patterns before confirming your order. Available with Push Out hardware. For Masonry opening information see page A24-A29. Sizes are shown as double glazing, not all sizes may be available in triple glazing. Egress calculations are based on the unit being opened at 70 for washability hinge, 80 for egress hinge, and having minimum clear openings of: Meets US Egress: 20" in width, 2 in height, with a total egress area of 5.7 Sq Ft Meets Canadian Egress: 15 in width, 15" in height, with a total egress area of 3.8 Sq Ft Please check your local building codes for any variation in Egress Standards from those stated above. For egress information, contact your Authorized Loewen Dealer. C4 Technical Guide Technical Guide C5
Window Wall Connection Window 1 3/1 4 9/1 1 7/1 1 3/1 1 15/1 2 7/8" [73] 4 9/1 1 7/1 1 5/1 3 3/1 3 3/1 [39] 3 3/1 4 9/1 (116 mm) EXTERIOR (166 mm) (166 mm) SQUARE GLAZING STOPS EXTERIOR 4 9/1 (116 mm) 3 1/2" FLAT CASING WITH BC SUBSILL EXTERIOR (166 mm) 2" BRICKMOULD WITH SUBSILL 1 3/1 FRAME WIDTH 1 3/1 4 9/1 3 1/ [83] 4 9/1 1 7/1 4 9/1 (116 mm) FRAME WIDTH VISIBLE GLASS 3 3/1 3/ 15/1 1 13/1 [45] EXTERIOR (166 mm) 4 9/1 (116 mm) 3 1/2" FLAT CASING WITH HERITAGE SILL NOSE 15/1 3/ EXTERIOR C6 Technical Guide Technical Guide C7
Push Out Window Mission Window 1 3/ [44] 1 13/1 [45] 4 9/1 1 7/1 2" [51] 1 9/1 [40] 4 9/1 1 15/1 1 5/1 1 15/1 1 15/1 4 7/8" [123] 3 3/1 3 3/1 3 3/1 [39] [39] (166 mm) ADAMS CASING WITH BC SILL NOSE EXTERIOR 4 9/1 (116 mm) ADAMS CASING WITH HERITAGE SUBSILL SQUARE GLAZING STOPS EXTERIOR (166 mm) 2" BRICKMOULD WITH BC SUBSILL PUTTY GLAZING STOPS (166 mm) WILLIAMSBURG CASING BC SUBSILL EXTERIOR 4 9/1 (116 mm) WILLIAMSBURG CASING WITH BC SUBSILL EXTERIOR (166 mm) 5 1/2" FLAT CASING WITH SUBSILL 1 15/1 4 9/1 1 3/1 4 9/1 VISIBLE GLASS 3/ 15/1 VISIBLE GLASS 3/1 [5] 3/ 15/1 3 3/1 1 13/1 [45] 4 9/1 (116 mm) NOSE & COVE CASING WITH HERITAGE SILL NOSE 4 9/1 (116 mm) CONTEMPORARY FRAME CASING PUTTY GLAZING STOPS 3/ 15/1 EXTERIOR EXTERIOR C8 Technical Guide Technical Guide C9
Push Out Mission Window Notes PUSH OUT MISSION AWNING WINDOW DETAILS Head HEAD & AND Sill SILL DETAILS 1 3/1 PUSH OUT MISSION AWNING WINDOW 1 15/1 DETAILS HEAD AND SILL DETAILS 1 3/1 1 7/1 1 7/1 1 5/1 4 9/1 4 9/1 1 7/1 1 7/1 1 5/1 419/1 7/1 4 9/1 4 9/1 1 15/1 1 5/1 1 5/1 1 5/1 3 1/1 (166mm) NON CLAD 4 9/1 (116mm) SQUARE GLAZING STOPS 2" BRICKMOULD SUBSILL NON CLAD (166mm) 2" BRICKMOULD SUBSILL 1 1/1 (166mm) (166mm) [33] PLAN VIEW NON CLAD NON CLAD 4 9/1 (116mm) 4 9/1 (116mm) SQUARE GLAZING SQUARE STOPS GLAZING STOPS 2" BRICKMOULD 2" BRICKMOULD SUBSILL SUBSILL NON NON CLAD CLAD (166mm) (166mm) 2" BRICKMOULD 2" BRICKMOULD SUBSILL SUBSILL [33] [38] PLAN VIEW OUTSIDE MEASUREMENT VISIBLE GLASS OUTSIDE MEASUREMENT VISIBLE GLASS OUTSIDE MEASUREMENT VISIBLE GLASS [38] 4 9/1 (116mm) 2" BRICKMOULD SILL NOSE 3/ 3/ 3/ 3/ 3/ 3/ 15/1 3/ 4 9/1 (116mm) 4 9/1 (116mm) 2" BRICKMOULD 2" BRICKMOULD SILL NOSE SILL NOSE NON CLAD 3/ 3/ 15/1 15/1 NON CLAD NON CLAD C10 Technical Guide Technical Guide C11
loewen.com