Catalogue 2012 walraven.com
Table of contents BIS Metal pipe clamps with rubber lining 3-4 BIS Stainless steel pipe clamps 4 starquick Plastic pipe clamps and accessories 5 BIS RapidRail Fixing system 6-8 BIS Sliding devices 8 BIS RapidStrut Fixing system 9 BIS Rooftop Support System 10 BIS Components for air ducts 10 BIS Fixing accessories 11 BIS Fasteners 12 oading tables BIS RapidRail & BIS RapidStrut 13-14 oading tables BIS Cantilever arms 15 R-Quality hallmark Walraven is one of the founding members of the quality association Gütegemeinschaft Rohrbefestigung e.v. (Safe Connection). In Europe, the most important producers of pipe fixing systems have joined together to set up industry standard product quality guidelines. This group, known as the Gütegemeinschaft Rohrbefestigung e.v., has become acknowledged in 2003 by the R, the German Institute for Quality ssurance and Certification. Benefits The technical properties of the products, like the maximum safe working load, are established and published by means of an industry-standard measuring method. Within the measuring method the maximum allowed load is calculated, taking into consideration a maximum allowable deflection. With the R-mark the quality of the pipe fixing products of the participating manufacturers, like clamps and fixing rails, becomes clear and easily comparable. R measuring methods take into account: failure load (also called breaking load) maximum deflection (f max = max. 1.5 mm or f max = 2% of the clamp diameter) noise insulation properties The maximum safe working loads which are mentioned in the tables are based on: 1) a Walraven developed measuring method 2) the measuring method as prescribed by R-GZ 655, which is set up by the Gütegemeinschaft Rohrbefestigung e.v.. The safe loads of products provided with the R-mark are checked by an independent testing institute. The R-mark is given exclusively to products which satisfy the highest quality standards and is an evidence of quality. This gives the users of pipe fixing systems certainty and trust! t this moment 2 measuring methods have been published: pipe clamps (R-GZ 655/B) fixing rail (R-GZ 655/C) Measuring methods for cantilever arms and rail accessories are being developed. 2
BIS Metal pipe clamps with rubber lining BIS Bifix 1301 05 35 Two-screw clamp with patented quick locking system, zinc plated, noise insulation tested according to DIN 4109. lso available model 1301S with heat resistant silicone lining (up to 200 C). Dimension (mm) Connection Reece Part No. WM Part No. Crtn 11-15 M10 510570 312 3 015 50 19-23 M10 510571 312 3 023 50 24-29 M10 510572 312 3 029 50 30-35 M10 510573 312 3 035 50 38-43 M10 510574 312 3 043 50 44-49 M10 510660 312 3 049 50 50-56 M10 510661 312 3 056 50 57-63 M10 510576 312 3 063 50 64-67 M10 510577 312 3 067 50 70-76 M10 510578 312 3 076 25 79-85 M10 510579 312 3 085 25 86-91 M10 510580 312 3 091 25 100-106 M10 510581 312 3 106 25 108-116 M10 510582 312 3 116 25 124-132 M10 510583 312 3 132 25 149-154 M10 510584 312 3 154 25 159-168 M10 510585 312 3 168 10 200-210 M10 510586 312 3 210 10 BISMT 2000 05 10 Single screw clamp with patented BISMT quick locking system, zinc plated, noise insulation tested according DIN 4109. Dimension (mm) Connection Reece Part No. WM Part No. Crtn 11-14 M8/M10 510184 340 3 014 50 20-23 M8/M10 510186 340 3 023 50 25-28 M8/M10 510187 340 3 028 50 31-35 M8/M10 510188 340 3 035 50 36-39 M8/M10 510189 340 3 039 50 40-43 M8/M10 510190 340 3 043 50 48-53 M8/M10 510191 340 3 053 50 57-63 M8/M10 510193 340 3 063 50 BISMT 2000 05 15 Two-screw clamp with patented BISMT quick locking system, zinc plated, noise insulation tested according DIN 4109. Dimension (mm) Connection Reece Part No. WM Part No. Crtn 64-70 M8/M10 510195 340 3 070 50 73-80 M8/M10 510196 340 3 080 50 83-91 M8/M10 510197 340 3 091 25 100-105 M8/M10 510198 340 3 105 25 108-114 M8/M10 510199 340 3 114 25 3
BIS Metal pipe clamps with rubber lining BIS Bifix 5000 25 10 Two-screw clamp suitable for either location or tight fixing of plastic pipes such as PB, PP, PVC, VPE and HDPE, with patented quick locking system, zinc plated. Dimension (mm) Connection Reece Part No. WM Part No. Crtn 25 M10 510210 348 8 029 50 32 M10 510211 348 8 035 50 40 M10 510212 348 8 043 50 50 M10 510213 348 8 054 50 56-58 M8/M10 501203 348 0 058 50 63 M10 510215 348 8 067 50 75 M10 510217 348 8 076 25 75-78 M8/M10 510204 348 0 078 50 83 M10 510218 348 8 083 25 90 M10 510205 348 3 090 25 110 M10 510206 348 3 110 25 160 M10 510208 348 3 160 10 BIS Stand pipe brackets 30 05 One-part console set with BISMT S Guidance clamp. Dimension Reece Part No. WM Part No. Crtn DN100 510226 432 3 100 120 DN150 510227 432 3 150 100 BIS Stainless steel pipe clamps BIS Bifix 1301 M 05 05 Two-screw clamp with patented quick locking system, stainless steel, noise insulation tested according to DIN 4109. Dimension (mm) Connection Reece Part No. WM Part No. Crtn 14-18 M10 9502270 312 7 018 50 19-23 M10 9502271 312 7 023 50 24-29 M10 9502272 312 7 029 50 30-35 M10 510136 312 7 035 50 38-43 M10 510137 312 7 043 50 44-49 M10 510488 312 7 049 50 50-56 M10 510489 312 7 056 50 57-63 M10 510139 312 7 063 50 64-67 M10 510140 312 7 067 25 70-76 M10 510141 312 7 076 25 79-85 M10 9501074 312 7 085 25 86-91 M10 510143 312 7 091 25 100-106 M10 510144 312 7 106 25 108-116 M10 510145 312 7 116 25 124-132 M10 9501075 312 7 132 25 133-141 M10 9501076 312 7 141 25 159-168 M10 9501077 312 7 168 15 244-250 M10 9501078 312 7 250 10 4
BIS starquick Plastic pipe clamps and accessories BIS starquick Clamps (grey) C 05 05 One-part clamp, closes by applying pressure to the pipe, self-locking. For outdoor and indoor use. Dimension (mm) Reece Part No. WM Part No. Crtn 12-14 510557 085 4 012 100 14-16 510558 085 4 015 100 16-20 510559 085 4 018 100 20-23 510560 085 4 022 50 24-28 510561 085 4 028 50 32-35 510562 085 4 035 50 35-40 510563 085 4 038 25 40-44 510564 085 4 042 25 44-50 510565 085 4 050 25 48-55 510566 085 4 054 15 59-65 510567 085 4 063 15 Wall mounted clamp Place pipe into clamp Push to fix and lock pipe into clamp BIS starquick Duo wall plate (grey) C 05 20 Modified P Reece Part No. WM Part No. Crtn 510550 085 4 000 100 For fixing two pipes with starquick Clamps together, up to size 20-23mm. BIS starquick Rail (grey) C 05 45 Modified P ength (mm) Reece Part No. WM Part No. Crtn 1.000 510041 085 4 325 25 For fixing two or more pipes parallel with starquick Clamps. BIS starquick Rail adaptor (grey) C 05 50 Modified P Reece Part No. WM Part No. Crtn 510553 085 4 313 20 Suitable for fixing starquick Clamps up to size 32-35 onto starquick Rail. BIS starquick Fixing nut (grey) C 05 65 Modified P Thread Reece Part No. WM Part No. Crtn M6 510551 085 4 006 100 To make a threaded M6 connection in a starquick Clamp. 5
BIS RapidRail Fixing system BIS RapidRail Fixing rail H 05 05 Galvabond. Type W x H (mm) ength Reece Part No. WM Part No. Pcs WM15 30 x 20 2 m 510268 650 5 015 10 WM2 30 x 30 2 m 510267 650 5 002 10 Hole pattern WM15 allows for BIS RapidRail accessories to be used on both sides of the rail. 1. Insert 2. Turn 1/4 stroke 3. Slide 4. ock BIS RapidRail Cantilever arms H 10 05 Zinc plated Type W x H (mm) ength Reece Part No. WM Part No. Crtn WM15 30 x 20 200 mm 510367 660 3 720 20 WM2 30 x 30 300 mm 510365 660 3 230 10 WM2 30 x 30 500 mm 510366 660 3 250 20 BIS RapidRail Universal wall plate H 10 30 Zinc plated For rail Reece Part No. WM Part No. Crtn WM15, 2 510371 661 3 200 25 Pre-assembled slide nuts with plastic spring. BIS Rail prop H 10 40 Support for fixing rail and cantilever arms, zinc plated. For rail ength (mm) Reece Part No. WM Part No. Crtn WM15, 2 200 510373 662 8 220 10 BIS RapidRail Slide nuts H 15 05 Slide nut with washer and plastic spring pre-assembled, zinc plated. For rail Dimension Reece Part No. WM Part No. Crtn WM15, 2 M6 510600 651 3 106 50 WM15, 2 M10 510602 651 3 110 50 BIS RapidRail Ball swivel hanger H 15 20 Zinc plated Dimension ength (mm) Reece Part No. WM Part No. Crtn M10 x 15 mm 50 510630 652 0 210 25 6
BIS RapidRail Fixing system BIS RapidRail Hammerfix H 15 10 Ready-to-use pre-assembled, with plastic spring for quick and easy fixing, zinc plated. * Perfect in combination with starquick For rail Dimension (mm) Reece Part No. WM Part No. Crtn WM15, 2 M6 x 20* 510662 652 3 602 25 WM15, 2 M10 x 25 510603 652 3 002 25 WM15, 2 M10 x 40 510604 652 3 004 25 WM15, 2 M10 x 60 510605 652 3 006 25 WM15, 2 M10 x 100 510606 652 3 010 25 WM15, 2 M10 x 160 510607 652 3 016 25 BIS RapidRail U-shaped washer H 15 30 Pre-galvanized For rail Reece Part No. WM Part No. Crtn WM15, 2 510611 653 5 110 50 BIS RapidRail Connector H 20 05 Zinc plated For rail Reece Part No. WM Part No. Crtn WM15, 2 510613 654 3 001 25 BIS RapidRail T-connector H 20 10 Zinc plated For rail Reece Part No. WM Part No. Crtn WM15, 2 510349 658 4 090 25 BIS RapidRail X-connector H 20 10 Zinc plated For rail Reece Part No. WM Part No. Crtn WM15, 2 510350 658 4 091 25 BIS RapidRail Connectors 90 / 135 H 20 15/20 Zinc plated For rail Reece Part No. WM Part No. Crtn WM15, 2 510343 658 4 001 25 WM15, 2 510346 658 4 051 25 7
BIS RapidRail Fixing system BIS RapidRail Beam clamp H 20 35 Zinc plated For rail Max. allowed load* Reece Part No. WM Part No. Crtn WM15, 2 450 kg 510620 658 5 011 50 *lways use 2 beam clamps per fixing. BIS Rail end caps H 25 05 P For rail Reece Part No. WM Part No. Crtn WM15 510614 656 6 000 50 WM2 510615 656 6 002 25 BIS Rubber profile H 25 10 EPDM rubber For rail Reece Part No. WM Part No. Roll WM15, 2 510616 656 8 001 30 m lso for threaded rod M6, M8 or M10 BIS Sliding devices BIS Expansion guide assembly E 10 25 Zinc plated Connection Max. slide Reece Part No. WM Part No. Crtn 2x M10/12 60 mm 510475 666 3 612 5 BIS Expansion device (single) Zinc plated Connection Max. slide Reece Part No. WM Part No. Crtn M10 60 mm 510461 666 2 110 25 8
BIS RapidStrut Fixing system BIS RapidStrut Rail I 05 05 * Hot Dip Galvanized, ** Galvabond W x H (mm) Thickness (mm) ength (m) Reece Part No. WM Part No. Bndl 41 x 21* 2 9502128 650 1 227 20 m 41 x 41* 2 9502127 650 1 247 20 m 41 x 21** 2 9502126 650 5 225 20 m 41 x 41** 2 9502125 650 5 245 20 m BIS RapidStrut Universal wall plate I 10 10 Zinc plated W x H (mm) Reece Part No. WM Part No. Crtn 70 x 163 mm 510629 6667 3 400 10 BIS RapidStrut Slide nuts I 15 05 Zinc plated Dimension Reece Part No. WM Part No. Crtn M10 510651 6651 7 110 20 M12 510652 6651 7 112 20 BIS RapidStrut Hammerfix I 15 10 Zinc plated Dimension Height (mm) Usable (mm) Reece Part No. WM Part No. Crtn M10 40 11 510608 652 7 004 5 M10 60 31 510609 652 7 006 5 M10 80 51 510610 652 7 008 5 BIS RapidStrut Rail connector (U-shaped) I 20 10 Zinc plated ength (mm) Height (mm) pre-assembled Reece Part No. WM Part No. Crtn 162 16 4 x M10 510624 6658 7 421 20 BIS Strut rubber strip I 25 15 EPDM rubber ength Reece Part No. WM Part No. Roll 30 m 510617 656 8 041 30 m 9
BIS Rooftop Support System BIS Yeti I 90 05 Description Dimension For Reece Part No. WM Part No. Qty BIS Yeti vertical 480x480 mm STRUT 41x41 510664 6768 5 001 1 BIS Yeti horizontal 480x480 mm STRUT 41x41 510665 6768 5 101 1 Vertical Horizontal djustable to compensate roof pitch up to 7 360 rotatable Strut 41 x 41 insert Complete set including non-slip anti-vibration mat Horizontal version does not include Strut rail. Installation example with solar panels on a rooftop BIS Components for air ducts BIS Rubber absorbtion piece F 10 05 Zinc plated Noise insulating element Reece Part No. WM Part No. Crtn For Rail WM15, 2, M10 (Male) 510482 412 5 007 100 For noise insulating suspension of fixing rail in combination with threaded rod M10. BIS Ductwork support brackets F 05 15 For rectangular air ducts, with hole Ø 4,2 mm for pop-rivet, zinc plated. Type llowed load Reece Part No. WM Part No. Crtn 70 kg 510638 412 5 001 50 Z 70 kg 510639 412 5 003 50 10
BIS Fixing ccessories BIS Wall plates K 15 05 / K 15 15 Zinc plated Dimension Type Reece Part No. WM Part No. Crtn M10 (female) light duty 510621 670 3 010 50 M10 (male) light duty 510622 672 3 010 50 M10 (female) light duty (Stainless) 510659 670 7 010 50 BIS Roofing sheet hanger VdS K 25 05 Galvabond Dimension Reece Part No. WM Part No. Crtn M10 (VdS-approval) 510623 678 5 010 50 BIS Hanger bolts K 40 05 With hexagon for fine setting, zinc plated. Dimension ength (mm) Reece Part No. WM Part No. Crtn M10* 80 510647 628 3 008 50 M10* 100 510648 628 3 010 50 M10* 120 510649 628 3 012 50 M10* 140 510625 628 3 014 50 M10 180 510626 628 3 018 50 M10 200 510627 628 3 020 50 * with T25 head BIS Threaded nipple K 55 25 Zinc plated Dimension Reece Part No. WM Part No. Crtn M6 (round collar) 510634 641 3 006 100 BIS Thread adaptors (M/F) K 55 35 Zinc plated Male Female Reece Part No. WM Part No. Crtn M10 M8 510635 647 3 308 100 M10 M12 510636 647 3 312 50 BIS Stud connector K 55 40 Zamak Dimension Reece Part No. WM Part No. Crtn M10 510656 645 8 010 25 11
BIS Fasteners BIS TSM concrete screw (socket F13) 05 05 zinc plated, yellow passivated Dimension (mm) Head Drill Ø (mm) Reece Part No. WM Part No. Crtn B6 x 55 M8/M10 6 510645 625 3 606 50 BIS Nylon plugs 10 30 P Dimension (mm) Reece Part No. WM Part No. Crtn 10 x 50 510631 610 0 010 50 12 x 60 510632 610 0 012 25 BIS Hammer-in shoulder stud + plug 15 05 Zinc plated, passivated, P Dimension (mm) Reece Part No. WM Part No. Crtn M6 x 40 510633 637 3 640 100 BIS Hammer-in stud + plug 15 10 Zinc plated, passivated, P Dimension (mm) Reece Part No. WM Part No. Crtn M8 x 80 510644 622 3 808 100 BIS Bifix standoff screw Zinc plated, passivated, P Dimension (mm) Reece Part No. WM Part No. Crtn M10 x 70 510663 RC635 5 070 25 BIS Wash basin fixing kit 20 05 Consists of 2 wood screws, 2 washers, 2 hex nuts, 2 guided rings, 2 plugs. Dimension (mm) Reece Part No. WM Part No. Crtn M10 x 105 1851574 RC0065 7 500 50 12
oading tables BIS RapidRail & BIS RapidStrut Suspension on 1 point Two equal loads F F F = 1/2 x = 1/3 x (mm) BIS RapidRail BIS RapidStrut BIS RapidRail BIS RapidStrut WM15 (30x20) WM2 (30x30) 41x21 41x41 WM15 (30x20) WM2 (30x30) 41x21 250 127 330 243 777 96 248 182 582 300 106 275 202 647 80 206 152 485 350 91 236 174 555 68 177 130 416 400 80 206 152 485 60 155 114 364 450 71 184 135 431 53 138 101 324 500 64 165 121 388 48 124 91 291 600 53 138 101 324 37 103 76 243 700 46 118 87 277 27 88 56 208 800 36 103 73 243 21 73 43 182 900 28 92 58 216 16 58 34 162 1.000 23 80 47 194 13 47 28 146 1.200 16 55 33 162 9 32 19 119 1.400 12 41 24 139 7 24 14 87 1.600 9 31 18 114 5 18 11 67 1.800 7 25 14 90 4 14 8 53 2.000 6 20 12 73 3 12 7 43 2.250 4 16 9 58 3 9 5 34 2.500 4 13 8 47 2 7 4 27 2.750 3 11 6 38 2 6 4 23 3.000 3 9 5 32 2 5 3 19 Maximum allowed load in kg. The stated values are only valid for fixing rail. The maximum safe load of all other construction parts has to be verified. 41x41 13
oading tables BIS RapidRail & BIS RapidStrut Three equal loads Uniformly distributed load F F F = 1/4 x (mm) BIS RapidRail BIS RapidStrut BIS RapidRail BIS RapidStrut WM15 (30x20) WM2 (30x30) 41x21 41x41 WM15 (30x20) WM2 (30x30) 41x21 250 64 165 121 388 255 661 486 1.553 300 53 138 101 324 212 551 405 1.294 350 46 118 87 277 182 472 347 1.109 400 40 103 76 243 159 413 304 971 450 35 92 67 216 142 367 270 863 500 32 83 61 194 127 330 243 777 600 27 69 51 162 101 275 202 647 700 19 59 40 139 74 236 153 555 800 15 52 31 121 57 199 117 485 900 12 41 24 108 45 157 93 431 1.000 10 33 20 97 36 127 75 388 1.200 7 23 14 81 25 88 52 323 1.400 5 17 10 63 19 65 38 238 1.600 4 13 8 48 14 50 29 182 1.800 3 10 6 38 11 39 23 144 2.000 2 8 5 31 9 32 19 116 2.250 2 7 4 24 7 25 15 92 2.500 2 5 3 20 6 20 12 74 2.750 1 4 3 16 5 17 10 62 3.000 1 4 2 14 4 14 8 52 Maximum allowed load in kg. The stated values are only valid for fixing rail. The maximum safe load of all other construction parts has to be verified. 41x41 14
oading tables BIS Cantilever arms Suspension on 1 point Uniformly distributed load F (mm) BIS RapidRail BIS RapidStrut BIS RapidRail BIS RapidStrut WM15 (30x20) WM2 (30x30) 41x21 41x41 WM15 (30x20) WM2 (30x30) 41x21 100 80 206 152 485 159 413 304 971 150 53 138 101 324 106 275 202 647 200 36 103 73 243 80 206 152 485 250 23 80 47 194 61 165 121 388 300 16 55 33 162 42 138 87 324 350 12 41 24 139 31 108 64 277 400 9 31 18 114 24 83 49 243 450 7 25 14 90 19 66 39 216 500 6 20 12 73 15 53 31 194 550 5 16 10 60 13 44 26 160 600 4 14 8 51 11 37 22 135 700 3 10 6 37 8 27 16 99 800 2 8 5 28 6 21 12 76 900 2 6 4 22 5 16 10 60 1.000 1 5 3 18 4 13 8 49 1.100 1 4 2 15 3 11 6 40 1.200-3 2 13 3 9 5 34 1.300-3 2 11 2 8 5 29 1.400-3 2 9 2 7 4 25 1.500-2 1 8 2 6 3 22 Maximum allowed load in kg. The stated values are only valid for fixing rail. The maximum safe load of all other construction parts has to be verified. 41x41 15
Distributor for ustralia REECE Pty td 118 Burwood Highway Burwood Victoria 3125 ustralia Tel: +61 3 9274 0000 Fax: +61 3 9274 0198 Web: www.reece.com.au E-Mail: info@reece.com.au Other countries Walraven International P.O. Box 15 3640 Mijdrecht (N) Tel. +31 (0)297 23 30 00 Fax +31 (0)297 23 30 99 export@walraven.com Walraven Group Mijdrecht (N) Tienen (BE) Bayreuth (DE) Grenoble (FR) Banbury (GB) Madrid (ES) Mladá Boleslav (CZ) Kraków (P) Kyiv (U) Moscow (RU) Rochester Hills (US) Shanghai (CN) Your wholesaler: walraven.com Stocklist Reece - 01/2012 - pdf - Subject to modifications