ALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE

DESCRIPTION AND OPERATION The Globe Model H-1, H-2 and H-3 Alarm Check Valves are used in wet pipe fire sprinkler systems. They primarily serve a dual purpose in that they prevent a reverse flow of water through their bodies (non-return) and also provide for the use of a hydraulic fire alarm which is not dependent upon an electrical power supply for its operation. Through the use of a hydraulic retard chamber a time delay is provided to eliminate potential false alarms caused by fluctuating water supply pressures. Where constant pressure water supplies are used the retard chamber (time delay) is not necessary. By incorporating the use of electrical pressure switches, other supplemental alarms, annunciators etc. may also be used. A unique feature found on the Globe 3", 4" and 6" Alarm Valves is the clapper being hinged to the handhole cover for extreme ease of removal for inspection and service. Globe Model H-1, H-2 and H-3 Alarm Check Valves may be installed in both vertical and horizontal positions and trim can be provided for both variable and constant water supply pressures in either of these positions. The body of the Alarm Check Valve is constructed of high tensile strength cast iron having considerable ductility to reduce damage in field handling. All interior operating parts are machined from highly corrosive-resistant alloys, each having high strength and good wear resistance. Rubber parts are of selective materials which have good abrasive resistance and long life expectancy in terms of resiliency. APPROVALS culus Listed FM Approved LPCB Approved - H1 & H3 NYC - DOB MEA 325-91-M ALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE MODEL H-1 MODEL H-2 TECHNICAL DATA Water Working Pressure Rating - 175 psi (12 bars) (see below for more specific rating approvals). 4" Model "H-1" culus Listed with D.I.N. Class 16 flanges has a pressure rating of 16 bars. 4" and 6" Model "H-1" LPCB Approved for a 16 bar pressure rating with DIN Class 16 flanges. Factory tested hydrostatically at twice the rated working pressure. Equivalent feet of pipe: 3" Valve = 12.2 feet, 4" Valve = 9.7 feet, 6" Valve = 17 feet. PHYSICAL DATA MODEL H-3 3" 4" 6" 3" 4" 3" 4" 6" Overall Length 9" 9" 10" 10" 10" 9¼" 9½" 11" Weight of Vavle Complete with Verticle Variable Pressure Trimmings MODEL / SIZE H-1 H-2 H-3 34 lbs. 42 lbs. 69 lbs. 20 lbs. 22 lbs. 28 lbs. 37 lbs. 59 lbs. 81 lbs. 89 lbs. 114 lbs. 57 lbs. 69 lbs. 75 lbs. 84 lbs. 100 lbs. AUGUST 2007 C-1 BULLETIN ACV, REV. #6

ALARM CHECK VALVE 3", 4" & 6" MODEL H-1 FLANGE/FLANGE 3" & 4" MODEL H-2 GROOVE/GROOVE 3", 4" & 6" MODEL H-3 FLANGE/GROOVE MODEL H-1 CROSS SECTIONS LEFT SIDE VIEW TOP VIEW ITEM DESCRIPTION MAT'L 3" P/N 4" P/N 6" P/N ITEM DESCRIPTION MAT'L 3" P/N 4" P/N 6" P/N 1 Body - H-1 Cast Iron 323803 323502 323562 9 Clapper Facing Disc EPDM 323815 323511 323571 Body H-2 Cast Iron 323827 323552 ------ 10 Disc Retainer Stainless 323816 323512 323572 Body - H-3 Cast Iron 323807 323542 323592 11 Lock Nut Stainless 323514 323514 323514 2 Cover Bolt Steel 323408 323509 323569 12 Disc Retainer Bolt Stainless 323817 323513 323573 3 Seat Ring Bronze 323809 323504 323564 13 Sealing Washer Hard Fiber 323515 323515 323515 4 Cover Cast Iron 323805 323507 323567 14 Hinge Pin Bushing Bronze 323819 323518 323518 5 Clapper Stainless 323814 323510 323570 15 Name Plate Aluminum 323480 323480 323480 6 Retaining Ring Stainless 323527 323517 323517 16 Drive Screw Stainless 323520 323520 323520 7 Hinge Pin Stainless 323818 323516 323516 17 Torsion Spring Stainless 323528 323528 323565 8 Cover Gasket Vellumoid 323810 323508 323568 18 Spring Bushing Brass ------ ------ 323579 Refer to Globe's Alarm Check Valve Installation and Maintenance Guide (Bulletin A.C.V.I.M.) for trim set-up, installation instructions, and maintenance. ORDERING INFORMATION SPECIFY Quantity Model Number Size Factory Trimmed and Leak Tested Hydrostatically or Loose Trim for Customer Installation. GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). AUGUST 2007 PRINTED U.S.A. 1-800-248-0278 www.globesprinkler.com BULLETIN ACV, REV. #6

CONCEALED EXTENDED COVERAGE FOR LIGHT HAZARD OCCUPANCIES DESCRIPTION AND OPERATION The Globe Quick Response GL5613 and GL8113 Extended Coverage Horizontal Sidewall Adjustable Concealed Sprinkler for light hazard occupancies, have the lowest profile available for this type of sprinkler, providing an aesthetically pleasing design. It provides sprinkler operation approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards, and in accordance with NFPA 13. The sprinkler has 1/2 of adjustment for ease of installation. All that is seen on the wall is a 3 1/4 diameter wall plate color finished to match the specifiers exact requirements. In addition to making the sprinkler much less noticeable, the wall plate assembly also provides protection for the sprinkler from flying or hanging objects. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. The 3mm frangible glass ampule provides sprinkler operation approximately six times faster than standard response sprinklers, they can also be installed wherever standard extended coverage horizontal sidewall sprinklers are specified. The wall plate is soldered to the sprinkler s special upper support assembly in three places. Upon the application of sufficient heat, the plate falls to the floor exposing the quick response sprinkler. At the rated temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings - 135 F (57 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 135 F (57 C) Cover Plate 175 F (79 C) Sprinkler, 155 F (68 C) Cover Plate. Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Cover Plate - brass Upper Escutcheon Assembly - steel CONCEALED EXTENDED COVERAGE SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F / 155 F 57 C / 68 C ORANGE / RED 100 F 38 C INTERMEDIATE 175 F 79 C YELLOW 100 F 38 C FEBRUARY 2005 A-47 BULLETIN GL5613, REV. #7

CONCEALED EXTENDED COVERAGE FOR LIGHT HAZARD OCCUPANCIES SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE FINISHES 5.6 8.1 (80 metric) (116 metric) 1/2" NPT 3/4" NPT Bright Chrome White Painted *Satin Chrome *Bright Brass *Other Painted Surfaces STYLE CONCEALED SIDEWALL NOTE: METRIC CONVERSIONS ARE APPROXIMATE. SIN MODEL K FACTOR APPROVALS 135 F (57 C) WITH PLATE 135 F (57 C) 155 F (68 C) WITH PLATE 135 F (57 C) *FINISHES AVAILABLE ON SPECIAL ORDER. 175 F (79 C) WITH PLATE 155 F (68 C) culus NYC - DOB MEA 101-92-E GL5613 5.6 X X X X X GL8113 8.1 X X X X X U.L. LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS MODEL NO. K-Factor GL5613 5.6 GL8113 8.1 TEMP. 135 F / 57 C 155 F / 68 C 175 F / 79 C 135 F / 57 C 155 F / 68 C 175 F / 79 C 135 F / 57 C 175 F / 79 C CEILING TO DEFLECTOR DISTANCE 4" TO 6" 6" TO 12" WIDTH OF COVERAGE LENGTH OF COVERAGE MIN. PRESSURE P.S.I. FLOW IN G.P.M. 16' 16' 26.8 29 16' 18' 26.8 29 16' * 20' 32.7 32 16' 16' 32.7 32 16' 18' 32.7 32 16' * 20' 32.7 32 4" TO 12" 16' 16' 10.3 26 4" TO 6" 16' 18' 12.8 29 6" TO 12" 16' 18' 15.6 32 4" TO 6" 16' * 20' 15.6 32 6" TO 12" 16' * 20' 20.9 37 * 155 F NOT LISTED IN 16' x 20' ROOM SIZE, USE EITHER 135 F OR 175 F. 7' MINIMUM SPACING FOR GL5613 AND 6' MINIMUM SPACING FOR GL8113. FEBRUARY 2005 CROSS SECTION PRINTED U.S.A. ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - 5.6K Wrenches - P/N 329678 Quantity - 8.1K Wrenches - P/N 329679 Quantity - Protective Caps - P/N 327119 GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). GLOBE FIRE SPRINKLER CORPORATION 1-800-248-0278 www.globesprinkler.com BULLETIN GL5613, REV. #7

DESCRIPTION AND OPERATION The Globe Quick Response GL5606 Adjustable Concealed Pendent Sprinkler has a low profile, aesthetically pleasing design. It provides sprinkler operation approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards. It offers the additional feature of greatly increased safety to life and should be used advisedly and under the direction of approving authorities having jurisdiction. The sprinkler is available with a nominal 1" of adjustment and a low profile cover plate assembly. The 4 1/2" diameter cover plate allows for 1" clearance around the sprinkler body. The GL Series Concealed Sprinkler may be virtually invisible as it does not interrupt the "smooth flow" of the ceiling. Globe's Concealed Sprinkler utilizes its 3mm frangible glass ampule which is located above the ceiling and concealed from view by the ceiling plate. The provided protective cap needs to be removed in order to install the sprinkler with the proper wrench. The protective cap must be replaced on the sprinkler until the time the cover plate is to be installed. The "push on - screw off" designed cover plate is easily installed and with a nominal 1" inch of adjustment makes it easier to get a proper fit at the ceiling. Operation of the sprinkler occurs when heat build up causes the solder holding the cover plate to the support shell to melt allowing the cover plate to fall clear. Continued heat build up causes the 3mm glass bulb to burst allowing the deflector to drop down and distribute water in an approved pattern to extinguish or control the fire. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings - 135 F (57 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 155 F (68 C) Cover Plate; 175 F (79 C) Sprinkler, 155 F (68 C) Cover Plate; 200 F (93 C) Sprinkler, 155 F (68 C) Cover Plate. Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - brass Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Drop Pin - stainless steel Cover Plate - brass Upper Escutcheon Assembly - plated steel. JANUARY 2009 A-38-EQ 4 1/2" diameter plate WHITE ADJUSTABLE CONCEALED PENDENT NOTE: Globe's wrench P/N 332765 must be used to install this sprinkler. SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES "THE INCH" MODEL GL5606 ONE INCH ADJUSTABLE CONCEALED PENDENT WITH COVER PLATE TO MEET IBC CODE FOR SEISMIC AREAS C, D & E BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C (989) 846-4583 BULLETIN GL5606-EQ REV#

MODEL GL5606 ADJUSTABLE CONCEALED PENDENT WITH COVER PLATE TO MEET IBC CODE FOR SEISMIC AREAS C, D & E SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH FINISHES Bright Chrome White Painted 5.6 (80 metric) 1/2" NPT 2 1/2" (6.4 cm) Bright Brass 1 Satin Chrome Other Painted Finishes 1 NOTE: Metric conversions are approximate. 1 Finishes available on special order. APPROVALS STYLE SIN MODEL K FACTOR 135 F (57 C) with plate 135 F (57 C) 155 F (68 C) with plate 135 F (57 C) 155 F (68 C) with plate 155 F (68 C) 175 F (79 C) with plate 155 F (68 C) 200 F (93 C) with plate 155 F (68 C) culus Adjustable Concealed Pendent GL5606 5.6 X X X X X X CROSS SECTION WHITE 135 F PART # WHITE 155 F PART # CHROME 135 F PART # CHROME 155 F PART # MIN. CEILING HOLE DIA. ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Adjustable Concealed Wrenches - P/N 332765 JANUARY 2009 332822 332828 332821 332827 3 7/8" - 4" PRINTED U.S.A. GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 1-800-248-0278 www.globesprinkler.com BULLETIN GL5606-EQ REV#

GL SERIES CONCEALED PENDENT DESCRIPTION AND OPERATION The Globe Quick Response GL Series Concealed Pendent Sprinkler is a low profile, aesthetically pleasing design. It provides sprinkler operation approximately six times faster than ordinary sprinklers and can be installed wherever standard concealed spray sprinklers are specified when allowed by the applicable standards. It offers the additional feature of greatly increased safety to life and should be used advisedly and under the direction of approving authorities having jurisdiction. The Sprinkler is available with 1/8" adjustment and a low profile cover plate assembly. All that is seen at the ceiling is a 3 5/16" diameter ceiling plate color finished to match the specifier's exact requirements. The GL Series Concealed Sprinkler may be virtually invisible as it does not interrupt the "smooth flow" of the ceiling. Globe's Concealed Sprinkler utilizes its 3mm frangible glass ampule type sprinkler which is located above the ceiling and concealed from view by the ceiling plate. The ceiling plate is soldered to the sprinkler's special upper support assembly in three places. Upon the application of sufficient heat, the plate falls to the floor exposing the quick response pendent spray sprinkler. At the ampule's rated temperature, the sprinkler opens discharging water onto the floor in its required and approved distribution pattern. A special spring is attached to the pendent sprinkler deflector that serves to provide a constant tension against the ceiling plate. This feature virtually ensures freedom from environmental vibration problems. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings - 135 F (57 C) Sprinkler, 135 F (57 C) Cover Plate; 155 F (68 C) Sprinkler, 135 F (57 C) Cover Plate 175 F (79 C) Sprinkler, 155 F (68 C) Cover Plate; 200 F (93 C) Sprinkler, 155 F (68 C) Cover Plate. Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Cover Plate - brass Upper Escutcheon Assembly - steel WHITE CONCEALED PENDENT SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C (989) 846-4583 DECEMBER 2006 A-32 BULLETIN GL2804, REV. #5

GL SERIES CONCEALED PENDENT SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH FINISHES 2.8 (39 metric) 1/2" NPT Bright Chrome White Painted 4.2 (59 metric) 1/2" NPT 2 1/2" (6.4 cm) Satin Chrome 1 5.6 (80 metric) 1/2" NPT Bright Brass 1 Other Painted Finishes 1 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. * FINISHES AVAILABLE ON SPECIAL ORDER. PAINTED PLATES OTHER THAN WHITE REQUIRE CUSTOMER TO FURNISH PAINT. APPROVALS STYLE SIN MODEL K FACTOR 135 F (57 C) WITH PLATE 135 F (57 C) 155 F (68 C) WITH PLATE 135 F (57 C) 175 F (79 C) WITH PLATE 155 F (68 C) 200 F (93 C) WITH PLATE 155 F (68 C) culus LPC CE CONCEALED PENDENT GL2804 2.8 X X X X X --- --- GL4204 4.2 X X X X X --- --- GL5604 5.6* X X X X X X X *LISTED FOR ALL HAZARDS. CROSS SECTION ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Concealed Wrenches - P/N 325391 Quantity - Protective Caps - P/N 327119 GLOBE PRODUCT WARRANTY 1/8" ADJUSTMENT Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 1-800-248-0278 www.globesprinkler.com DECEMBER 2006 PRINTED U.S.A. BULLETIN GL2804, REV. #5

GL SERIES DRY TYPE DESCRIPTION AND OPERATION The Globe Quick Response GL Series Dry Type Pendent Sprinkler is designed for use in special applications such as freezing environments and conditions where sediment or foreign materials might accumulate in ordinary drop nipples. The Globe Quick Response GL Series Dry Type Pendent Sprinkler utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. At the ampule's rated temperature, the sprinkler opens releasing the bulb seat, causing the inner tube assembly to move, allowing the spring assembly to pivot alongside the inner tube. At this time, water flows through the sprinkler and is distributed by the deflector in an approved discharge pattern. It can be installed wherever standard spray sprinklers are specified but offers the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern. SURFACE MOUNT SLEEVE & SKIRT TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings - 135 F (57 C), 155 F (68 C), 175 F (79 C) 200 F (93 C), 286 F (141 C). Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - brass Spring - teflon coated nickel alloy Retainer - brass Pin - stainless steel Torsion spring - stainless steel Bulb - glass with alcohol based solution, 3mm Orifice insert - brass 3/4" NPT or 1" NPT Outer tube - galvanized steel pipe Inner tube - stainless steel EXTENDED RECESSED SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION APRIL 2007 AVAILABLE SPRINKLER TEMPERATURES A-55 BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C HIGH 286 F 141 C BLUE 225 F 107 C BULLETIN GL5635, REV.#11

GL SERIES DRY TYPE STYLE PENDENT RECESSED PENDENT NOMINAL "K" FACTOR SIN MODEL K FACTOR THREAD SIZE CROSS SECTIONS SPECIFICATIONS 5.6 (80 metric) 3/4" or 1" NPT 8.1 (116 metric) 1" NPT NOTE: Metric conversions are approximate. culus listed corrosion resistant: Polyester must be specified on order. APPROVALS GL5635 5.6 1" NPT X X X X X X X GL5636 5.6 3/4" NPT X X X X - X X GL8135 8.1 1" NPT X X X X - X X GL5635 5.6 1" NPT X X X X X X X GL5636 5.6 3/4" NPT X X X X - X X GL8135 8.1 1" NPT X X X X - X X NOTE: Listed for ALL hazards * Pendent style - FM Approved 155 F, 200 F, and 286 F * Recessed Pendent style - FM Approved 155 F and 200 F 135 F 57 C THREAD SIZE LENGTH FINISHES 155 F 68 C 200 F 93 C culus Variable to 48" FM Variable to 36" 286 F 141 C * FM Factory Bronze Satin Chrome 1 Bright Chrome White Polyester Black Polyester Lead Coated 2 1 Finishes available on special order. 2 Lead Coated is UL approved only. culus NYC-DOB MEA 101-92-E IMPORTANT INSTALLATION DATA Globe GL Series Dry Pendent sprinklers should be installed in accordance with the requirements set forth in NFPA 13. These sprinklers are to be installed using a pipe wrench applied to the outer tube. When this is not possible, the proper sprinkler head wrench may be used with extreme care for lengths up to approximately 18". Excessive force may distort the frame thus destroying the unit. For further important installation data, please refer to our Dry Sprinkler Caution Sheet. EXTENDED PENDENT PENDENT ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Wrenches - P/N 333010 Quantity - Recessed Wrenches - P/N 337014 Quantity - Protective Caps - P/N 327109-CAP (Friction Fit Recessed) Escutcheons desired "A" Dimension - Distance from face of fitting to the finished ceiling line regardless of escutcheon used. RECESSED PENDENT SLEEVE & SKIRT PENDENT GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 1-800-248-0278 www.globesprinkler.com APRIL 2007 PRINTED U.S.A. BULLETIN GL5635, REV. #11

EXTENDED COVERAGE MODEL GL5628 DESCRIPTION AND OPERATION The Globe Quick Response Model GL5628 Extended Coverage Horizontal Sidewall Sprinkler is a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While these Quick Response Sprinklers provide an aesthetically pleasing appearance, they can be installed wherever standard extended coverage horizontal sprinklers are specified; but offer the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction, in accordance with their listings and in accordance with NFPA 13. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern. EXTENDED COVERAGE TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Rating - 135 F (57 C), 155 F (68 C), 175 F (79 C) 200 F (79 C). Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Escutcheon Assembly - steel RECESSED EXTENDED COVERAGE SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY INTERMEDIATE 135 F/155 F 175 F/200 F 57 C/68 C 79 C/93 C ORANGE/RED YELLOW/GREEN 100 F 150 F 38 C 66 C MAY 2004 A-44 BULLETIN GL5628, REV. #4

AL(FAme)NP(cm)ES EXTENDED COVERAGE MODEL GL5628 SPECIFICATIONS ON"CTORTHREADSIZELENGTHSHFactoryBronze*SatinChromeBrightChrome6tricT26WhitePolyester+BlackPolyester+*LeadCoateNOTE: METRIC CONVERSIONS ARE APPROXIMATE. *FINISHES AVAILABLE ON SPECIAL ORDER. +AVAILABLE AS U.L. AND C-U.L. LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER. APPROVALS SIN 135 F 155 F 175 F 200 F NYC-DOB ST YLE K-FACTOR cu Lus MODEL 57 C 68 C 79 C 93 C MEA 101-92-E SIDEWALL GL5628 5.6 X X X X X XNMI"KFINI5.801/2"1/2"7.dU.L. LISTING DESIGN - USE REQUIREMENTS FOR LIGHT HAZARDS MODEL NO. GL5628 MAY 2004 ST YLE St andar d & Recessed St andar d & Recessed T EMP. 135 F / 57 C 155 F / 68 C 175 F / 79 C CROSS SECTIONS CEILING TO DEFLECTOR DISTANCE 4" TO 12" 200 F / 93 C 4" TO 6" WIDTH OF COVERAGE PRINTED U.S.A. LENGTH OF COVERAGE ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Standard Wrenches - P/N 325390 Quantity - Recessed Wrenches - P/N 325391 Quantity - Protective Caps - P/N 327109-CAP (Friction Fit Recessed) GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 1-800-248-0278 MIN. PRESSURE P.S.I. FLOW IN G.P.M. 16' 16' 21.6 26 16' 18' 26.8 29 18' 18' 32.7 32 16' 16' 21.6 26 16' 18' 26.8 29 18' 18' 32.7 32 St andar d & 135 F / 57 C 4" TO 12" 16' 20' 32.7 32 Recessed Standard 175 F / 79 C 4" TO 12" 16' 20' 32.7 32 MINIMUM 7' SPRINKLER SPACING. 3/4" ADJUSTMENT 1/2" ADJUSTMENT www.globesprinkler.com BULLETIN GL5628, REV. #4

DESCRIPTION AND OPERATION The Globe Quick Response Models GL8128 and GL8129 Extended Coverage Horizontal Sidewall Sprinklers are a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While this Quick Response Sprinkler provides an aesthetically pleasing appearance, it can be installed wherever standard extended coverage horizontal sprinklers are specified; but offers the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction, in accordance with their listings and in accordance with NFPA 13. The heart of Globe's Model GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern depending upon the deflector style used. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Rating - 135 F (57 C), 155 F (68 C), 175 F (79 C) 200 F (93 C). Water Working Pressure Rating - 175 psi (1207 kpa). Factory tested hydrostatically to 500 psi (3448 kpa). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Escutcheon Assembly - steel EXTENDED COVERAGE MODELS GL8128, GL8129 EXTENDED COVERAGE RECESSED EXTENDED COVERAGE SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRIN KLER TEMPERATU RES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW /GREEN 150 F 66 C OCTOBER 2003 A-46 BULLETIN GL8128, REV. #5

EXTENDED COVERAGE MODELS GL8128, GL8129 MODEL NO. GL8128 GL8129 GL8128 GL8129 GL8128 GL8129 GL8128 GL8129 OCTOBER 2003 NOMINAL "K" FACTOR THREAD SIZE LENGTH FINISHES Factory Bronze *Satin Chrome 8.1 (116 metric) 3/4" NPT 3" (7.6 cm) Bright Chrome W hite Polyester+ Black Polyester+ *Lead Coated NOTE: METRIC CONVERSIONS ARE APPROXIMATE. *FINISHES AVAILABLE ON SPECIAL ORDER. +AVAILABLE AS culus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER. ST YLE SID EWALL ST YLE St andar d & Recessed St andar d & Recessed St andar d & Recessed MODEL NO. CROSS SECTIONS SPECIFICATIONS K FACTOR 135 F 57 C APPROVALS 155 F 68 C 175 F 79 C 200 F 93 C culus NYC - DOB MEA 101-92-E GL8128 8.1 X X X X X X GL8129 8.1 X X X X X X U.L. LISTIN G DESIGN - USE REQUIREMEN TS FOR LIGH T H AZARDS T EMP. 135 F / 57 C 155 F / 68 C 175 F / 79 C 200 F / 93 C 135 F / 57 C 155 F / 68 C 175 F / 79 C 135 F / 57 C Standard 175 F / 79 C St andar d & Recessed 135 F / 57 C CEILING TO DEFLECTOR DISTANCE WIDTH OF COVERAGE 4" TO 6" 16' 6" TO 12" 16' 4" TO 6" 6" TO 12" 4" TO 6" 6" TO 12" 4" TO 6" 6" TO 12" *LISTED WITH RECESSED CUP WITH 1/2" ADJUSTMENT, MINIMUM 6' SPRINKLER SPACING. LENGTH OF COVERAGE MIN. PRESSURE P.S.I. ORDERING INFORMATION FLOW IN G.P.M. 16' 10.3 26 18' 12.8 29 16' 10.3 26 18' 12.8 29 16' 20' 16.6 33 16' *22' 20.8 37 *24' 26.8 42 SPECIFY Quantity Model Number Style Orifice Temperature Finishes desired Quantity - Wrenches - P/N 312366 Quantity - Recessed Wrenches - P/N 325401, Rev. D Quantity - Protective Caps - P/N 327109-CAP (Friction Fit Recessed) GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 1-800-248-0278 www.globesprinkler.com PRINTED U.S.A. BULLETIN GL8128, REV. #5

DESCRIPTION AND OPERATION The Globe Quick Response GL Series Sprinkler is a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While the Quick Response Sprinkler provides an aesthetically pleasing appearance, it can be installed wherever standard spray sprinklers are specified but offers the additional feature of greatly increased safety to life. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction. The heart of Globe s GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern depending upon the deflector style used. The sprinkler and escutcheon are not factory assembled. Assembly is done in the field. GL SERIES RECESSED PENDENT RECESSED RECESSED PENDENT TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings - 135 F (57 C), 155 F (68 C), 175 F (79 C), 200 F (93 C), 286 F (141 C). Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. Escutcheon Assembly - steel RECESSED SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C HIGH 286 F 141 C BLUE 225 F 107 C DECEMBER 2006 A-24 BULLETIN GL2801, REV. #5

GL SERIES RECESSED PENDENT RECESSED SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH 1 FINISHES STYLE 2.8 (39 metric) 1/2" NPT 2 1/4" (5.7 cm) Factory Bronze Satin Chrome 4.2 (59 metric) 1/2" NPT 2 1/4" (5.7 cm) 2 Bright Chrome 5.6 (80 metric) 1/2" NPT 2 1/4" (5.7 cm) White Polyester 3 7.8 (111 metric) 1/2" NPT 2 1/4" (5.7 cm) Black Polyester 3 8.1 (116 metric) 3/4" NPT 2 7/16" (6.2 cm) Lead Coated 2 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. SIN MODEL K FACTOR 135 F 57 C 155 F 68 C APPROVALS 175 F 79 C 200 F 93 C **286 F 141 C 1 IS 2 9/16". 2 FINISHES AVAILABLE ON SPECIAL ORDER. 3 C-UL LISTED CORROSION RESISTANT - POLYESTER MUST BE SPECIFIED ON ORDER. culus FM LPC CE NYC - DOB MEA 101-92-E PENDENT RECESSED HORIZONTAL SIDEWALL RECESSED PENDENT GL2801 2.8 X X X X X X --- --- --- X GL4201 4.2 X X X X X X --- --- --- X GL5601 5.6 X X X X X X X X X X GL8101 7.8* X X X X X X X --- --- X GL8106 8.1 X X X X X X X X X X GL2826 2.8 X X X X X X --- --- --- X GL4226 4.2 X X X X X X --- --- --- X GL5626 5.6 X X X X X X --- --- --- X GL8127 8.1 X X X X X X --- --- --- --- culus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING. 5.6K ORIFICE, 7.8K ORIFICE AND 8.1K ORIFICE LISTED FOR ALL HAZARDS. * 7.8K X 1/2" NPT. **286 F culus LISTED ONLY. 1/2" RECESSED ESCUTCHEONS ARE REQUIRED FOR FM APPROVED SPRINKLERS. CROSS SECTIONS HORIZONTAL SIDEWALL ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Recessed Wrenches - P/N 325391 (1/2"); P/N 325401, Rev. F (L.O.) Quantity - Protective Caps - P/N 327109-CAP (Friction Fit Recessed) GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 1-800-248-0278 www.globesprinkler.com DECEMBER 2006 PRINTED U.S.A. BULLETIN GL2801, REV. #5

DESCRIPTION AND OPERATION The Globe Quick Response GL Series Sprinklers are a low profile yet durable design which utilizes a 3mm frangible glass ampule as the thermosensitive element. This provides sprinkler operation approximately six times faster than ordinary sprinklers. While the Quick Response Sprinkler provides an aesthetically pleasing appearance, it can be installed wherever standard spray sprinklers are specified when allowed by the applicable standards. It offers the additional feature of greatly increased safety to life and is available in various styles, orifices, temperature ratings and finishes to meet many varying design requirements. Quick Response Sprinklers should be used advisedly and under the direction of approving authorities having jurisdiction. The heart of Globe's GL Series sprinkler proven actuating assembly is a hermetically sealed frangible glass ampule that contains a precisely measured amount of fluid. When heat is absorbed, the liquid within the bulb expands increasing the internal pressure. At the prescribed temperature the internal pressure within the ampule exceeds the strength of the glass causing the glass to shatter. This results in water discharge which is distributed in an approved pattern depending upon the deflector style used. The sprinkler and escutcheon are not factory assembled. Assembly is done in the field. TECHNICAL DATA See reverse side for Approvals and Specifications. Temperature Ratings - 135 F (57 C), 155 F (68 C), 175 F (79 C), 200 F (93 C), 286 F (141 C). Water Working Pressure Rating - 175 psi (12 Bars). Factory tested hydrostatically to 500 psi (34 Bars). Maximum low temperature glass bulb rating is -67 F (-55 C). Frame - bronze Deflector - brass Screw - brass Bulb seat - copper Spring - nickel alloy Seal - teflon Bulb - glass with alcohol based solution, 3mm size. GL SERIES UPRIGHT PENDENT VERTICAL SIDEWALL CONVENTIONAL (OLD STYLE) UPRIGHT CONVENTIONAL PENDENT VERTICAL SIDEWALL SPRINKLER TEMPERATURE RATING/CLASSIFICATION and COLOR CODING CLASSIFICATION AVAILABLE SPRINKLER TEMPERATURES BULB COLOR N.F.P.A. MAXIMUM CEILING TEMPERATURE ORDINARY 135 F/155 F 57 C/68 C ORANGE/RED 100 F 38 C INTERMEDIATE 175 F/200 F 79 C/93 C YELLOW/GREEN 150 F 66 C HIGH 286 F 141 C BLUE 225 F 107 C DECEMBER 2006 A-20 BULLETIN GL5615, REV. #6

GL SERIES UPRIGHT PENDENT VERTICAL SIDEWALL CONVENTIONAL (OLD STYLE) SPECIFICATIONS NOMINAL "K" FACTOR THREAD SIZE LENGTH 1 FINISHES STYLE UPRIGHT PENDENT 2.8 (39 metric) 1/2" NPT 2 1/4" (5.7 cm) Factory Bronze Satin Chrome 4.2 (59 metric) 1/2" NPT 2 1/4" (5.7 cm) 2 Bright Chrome 5.6 (80 metric) 1/2" NPT 2 1/4" (5.7 cm) White Polyester 3 7.8 (111 metric) 1/2" NPT 2 1/4" (5.7 cm) Black Polyester 3 8.1 (116 metric) 3/4" NPT 2 7/16" (6.2 cm) Lead Coated 2 NOTE: METRIC CONVERSIONS ARE APPROXIMATE. 1 IS 2 9/16". 2 FINISHES AVAILABLE ON SPECIAL ORDER. 3 AVAILABLE AS culus LISTED CORROSION RESISTANT WHEN SPECIFIED ON ORDER. SIN MODEL K FACTOR 135 F 57 C 155 F 68 C APPROVALS 175 F 79 C 200 F 93 C 286 F 141 C culus F.M. LPC CE NYC - DOB MEA 101-92-E GL2815 2.8 X X X X X X --- --- --- X GL4215 4.2 X X X X X X --- --- --- X GL5615 5.6 X X X X X X X X X X GL8115 7.8* X X X X X X X --- --- X GL8118 8.1 X X X X X X X X X X GL2801 2.8 X X X X X X --- --- --- X GL4201 4.2 X X X X X X --- --- --- X GL5601 5.6 X X X X X X X X X X GL8101 7.8* X X X X X X X --- --- X GL8106 8.1 X X X X X X X X X X VERTICAL SIDEWALL HORIZONTAL SIDEWALL CONVENTIONAL (OLD STYLE) GL5632 5.6 X X X X X X X --- --- --- GL8133 8.1 X X X X X X --- --- --- --- GL2826 2.8 X X X X X X --- --- --- X GL4226 4.2 X X X X X X --- --- --- X GL5626 5.6 X X X X X X X --- --- X GL8127 8.1 X X X X X X --- --- --- --- GL5624 5.6 X X X X X --- --- X X --- GL8125 8.1 X X X X X --- --- X X --- ORDERING INFORMATION SPECIFY Quantity Model Number Style Orifice Thread Sizes Temperature Finishes desired Quantity - Wrenches - P/N 325390 (1/2"); P/N 312366 (L.O.) culus LISTED FOR DEFLECTOR 4" TO 12" BELOW THE CEILING, FM APPROVED 4" TO 6". VERTICAL SIDEWALL SPRINKLER culus LISTED FOR LIGHT HAZARD ONLY. PENDENT VERTICAL SIDEWALL culus LISTED FOR 6' MIN. SPACING. UPRIGHT VERTICAL SIDEWALL culus LISTED FOR 9' MIN. SPACING. *1/2" NPT. GLOBE PRODUCT WARRANTY Globe agrees to repair or replace any of its own manufactured products found to be defective in material or workmanship for a period of one year from date of shipment. For specific details of our warranty please refer to Price List Terms and Conditions of Sale (Our Price List). 1-800-248-0278 www.globesprinkler.com DECEMBER 2006 PRINTED U.S.A. BULLETIN GL5615, REV. #6

SPRINKLER CABINETS FOR REPLACEMENT SIX SPRINKLER CABINET FOR ½" OR ¾" SPRINKLERS P/N 312390 TWELVE SPRINKLER CABINET FOR ½" OR ¾" SPRINKLERS P/N 312392 When storing concealed sprinklers, Twelve Sprinkler Cabinet holds six units and Six Sprinkler Cabinet holds three units. 1-800-248-0278 www.globesprinkler.com AUGUST 2002 B-5 BULLETIN SPRCAB, REV. #2