Compact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.

Similar documents
Compact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V

Compact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.

How to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV

Series RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Hydraulic Cylinder. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order Z73. Bore size. 20mm 25mm 32mm 40mm 50mm 63mm 80mm 100mm

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

Compact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting

Series CQS. Compact Cylinder. Square body shape gives you flexibility for machine design

Compact Cylinder. With a short overall length, the space-saving cylinder helps to make various jigs and equipment more compact.

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)

2 way basic mounting: Through-hole or both ends tapped

Compact Cylinder With Solenoid Valve

Compact Cylinder/Plate type

Compact Hydraulic Cylinder

2 way basic mounting: Through-hole or both ends tapped

Air Cylinder. ø6, ø10, ø16. Easy installation. Reduced piston rod deflection

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting

Series CLQ. Compact Cylinder with Lock. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

Mini Free Mount Cylinder

Air Cylinder: Standard Type Double Acting, Single Rod. How to Order. Standard stroke (mm) ø6 15, 30, 45, 60. Cushion Nil A

Compact Cylinder Remodeled with a new body to get more flexibility! Can mount small auto switches on 4 surfaces.

Compact Guide Cylinder

Valve Mounted Cylinder Double Acting, Single Rod. How to Order. Electrical entry. L L plug connector M M plug connector. G Grommet

Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")

Magnetically Coupled Rodless Cylinder Slider Type: Ball Bushing Bearing. How to Order CY1L 25 H 300 J79W. Load voltage 5 V 200V 100 V 12 V 5 V, 12 V

Compact Cylinder with Lock

Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return

Elliptical design for space-savings

Compact Guide Cylinder Series MGQ

Rotary Clamp Cylinder

Toggle Type Air Gripper

Series MK ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63

High Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector

Air Cylinder: With End Lock. How to Order. Port thread type. Cylinder stroke (mm) For more information, please refer to the next page.

Series MBB ø32, ø40, ø50, ø63, ø80, ø100

Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Round Type Hydraulic Cylinder

CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order

SeriesMHZL2 How to Order

Series MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port

Compact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55

Rotary Clamp Cylinder

Series C95 ø32, ø40, ø50, ø63, ø80, ø100

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Series MGC ø20, ø25, ø32, ø40, ø50

10%lighter. 1.7 kg. 1.9 kg. Air Cylinder. New. Weight. Reduced weight by changing the shape of the rod cover and head cover. Series MB1 CAT.

Series MGP. Compact Guide Cylinder. New end lock type introduced to Series MGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.

10% lighter kg kg. Air Cylinder. MB Series. ø32, ø40, ø50, ø63, ø80, ø100, ø125

Round Type Hydraulic Cylinder

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32

Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.


CAT.ES20-85 F. Air Cylinder. ø125 newly introduced. Series MB. ø32,ø40,ø50,ø63,ø80,ø100,ø125

10 % lighter kg. Air Cylinder kg. New. New. Series. Added ø 125 to standard type.

Small Bore Hydraulic Cylinder

Fine Lock Cylinder Double Acting, Single Rod. How to Order. Port thread type. Cylinder stroke (mm) Refer to Standard Stroke on page 718.

Air Cylinder. New RoHS. Series CG1. Female rod end available as standard. Rod end styles suitable for the application can be selected.

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

Air Cylinder Series CG1

Compact Rotary Actuator

Compact Rotary Actuator

Free Mount Cylinder. Series CU. A space saving air cylinder with multiple surfaces for mounting. The series consist of an array of cylinders.

Air Cylinder. New RoHS. Series CM2. Female rod end available as standard. Rod end styles suitable for the application can be selected.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions

CAT.DKI A. SMC guide to ATEX compliant products

3 Pneumatics. Valve Mounted Cylinders CV MVGQ. Valve Mounted Cylinders. Series CVQ. Series CVJ5. Series CVJ3. Series CVM5/ CVM5K Double acting

Air Cylinder: With End Lock. How to Order. Cylinder stroke (mm) (Refer to Standard Stroke on page 250.) H Head end lock. Rod boot. Nil.

66 mm 21% Air Cylinder Short Type. New RoHS. Compact with a new construction! New release with full functions. Series CM mm.

Low Profile Slide Table. Series MXF. ø8, ø12, ø16, ø20. Body mounting(body tapped)

ISO Standard Hydraulic Cylinder

Hygienic Design Cylinder

Platform Cylinder. CXT Series. ø12, ø16, ø20, ø25, ø32, ø40. A highly rigid and highly accurate slide table integrated with an actuator.

Air Cylinder: Standard Type Double Acting, Double Rod. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Bore size

Series MXS ø6, ø8, ø12, ø16, ø20, ø25

Air Cylinder. CG1 Series. Female rod end available as standard. Rod end types suitable for the application can be selected.

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3)

Small Bore Hydraulic Cylinder

22mm Space required between the bottom of the cylinder body and your equipment is reduced.

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.

Rotary Actuator/Vane Style

% lighter. Air Cylinder. New. New RoHS. 1.31kg. Series CA2. Reduced weight by changing the shape of the rod cover and head cover.

Compact Rotary Actuator

Platform Cylinder. ø12, ø16, ø20, ø25, ø32, ø40. Series CXT 12 CXT 16 CXT 20 CXT 25 CXT 32 CXT 40

Dual rod cylinder with guide function for pick & place applications.

Compact Guide Cylinder Series MGP

Compact Guide Cylinder

Product series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

16% lighter Existing model

16% lighter kg. Air Cylinder kg. New. New. Weight. Reduced weight by changing the shape of the rod cover and head cover.

Series CRB2. Rotary Actuator Vane Style. Size: 10, 15, 20, 30, 40 CRB2 CRBU2 CRB1 MSU CRJ CRA1 CRQ2 MSQ MRQ D- 20- Series Variations.

Transcription:

Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series ction ouble acting Style Single rod CQ ouble rod CQW Mounting female thread () asic uilt-in magnet With rubber bumper Rear boss mount size,,,,,,,,,,,,,, Standard stroke ø, ø/ to ø, ø/ to ø, ø/ to ø to ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø to ø/ to Page.3-.3- Single acting Spring return/extend CQ,,,, ø to ø/, ø/,.3-3 Non-rotating rod xial piping (Centralized piping) ouble acting ouble acting Single rod CQK ouble rod CQKW Single rod CQP,,,,,,,,,,,,,,,,,, ø, ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø, ø/ to ø to ø/ to.3-.3-.3- C CQS CQ M Single acting Spring return/extend CQP,,,, ø to ø/, ø/,.3- arge bore size ouble acting Single rod CQ ouble rod CQW, 1, 1 to to.3-.3-4 ong stroke ouble acting Single rod CQ,,, to.3- nti-lateral load pplicable uto Switch Reed switch Solid state switch ouble acting Single rod CQS With One-touch fitting ( size ø to ø) Foot and flange ouble clevis Copper free Clean series ( ø to ø) ir-hydro ( ø to ø) -/, -3C/, - -H/H, -W, -V -F/J, -FV, -JC, -FW/JW, -FWV, -F, -FF, -FNT, -F, -FW, -FV, -FWV,,, ø to ø/ to ø to ø/ to.3- Made to Order Refer to p..4-1 for made to order specifications of CQ series..3-1

Compact Cylinder/Standard: ouble cting Single Rod Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø How to Order Standard CQ With auto switch CQ 3 S With auto switch (uilt-in magnet) Mounting Mounting racket Part No. size Through -hole (Standard) oth ends tapped Foot mm mm mm mm mm F Foot (4) CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- F G Flange CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F mm mm mm mm mm Front flange Rear flange ouble clevis Mounting brackets are shipped not assembled with the cylinder. Style Pneumatic H ir-hydro (1) Note 1) The bores for air-hydro are ø to ø. size Piping Screw-in piping With One-touch fitting () Note ) The tubes for the built-in One-touch fittings are ø to ø. They cannot be used for the air-hydro. ouble clevis () CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- Note 4) pcs. per cylinder should be ordered when foot brackets are required. Note ) Each package contains the following parts. Foot, Flange: ody mounting bolt ouble clevis: Clevis pin, C shape snap ring for axis, body mounting bolt Note ) Package for double clevis contains clevis pin and snap ring. pplicable uto switches/refer to p..3- for further information on auto switch. Style Special function Reed switch Solid state switch Electrical entry iagnostic ( color) Grommet iagnostic ( color) Grommet Connector Grommet Connector Indicator Yes Yes No No Yes Yes Wiring (Output) 3 wire (Equiv. NPN) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 3 wire (PNP) ction ouble acting Cylinder stroke Refer to p..3-3 for standard and intermediate stroke. oad voltage C V V V, V 4V V V, V V, V V V, V V V, V 4V V V, V C V V V 4V Without auto switch (Cylinder built-in magnet) Refer to table below for auto switch model no. Rail mounting ø to ø irect mounting ø to ø Perp. In-line H Perp. V In-line 3 H 3H 3V 3 H V 3C C W FNV FPV FV JC FNWV uto switch F FP J FW FPW V FWV JW Grommet wire Water resistant ( color) F With timer 3 wire (NPN) FNT V, V With diagnostic output ( color) FF 4 wire atch with diagnostic (NPN) output ( color) FF ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switches marked with a are manufactured upon receipt of order. Refer to p..3- for parts No. of auto switch mounting brackets. Number of auto switches S 1 n n ody option Standard (Rod end female thread) F Rear boss mount C With rubber bumper (3) M Combination of body option is possible. CM, FC, FM, FCM Note3) ir-hydro with rubber bumper is not available. FNV FPV FV FNWV FPWV FWV FN FP F FNW FPW FW F ead wire (m). () 3 () (Z) None (N) pplicable load Relay PC Relay PC.3-

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Order Made Standard Stroke Pneumatic size Standard stroke,,, 1,,,,, to,, 1,,,, 3,, 4,,, Refer to p..3- when stroke exceeds standard range. ir-hydro size,,,, Made to Order Specifications Refer to p..4-1 for common made to order specifications and p..4- for individual specifications. llowable Kinetic Energy Refer to p..3-4 for allowable kinetic energy.,, 1,,,, 3,, 4,,, 1,,,, 3,, 4,,, Standard stroke,, 1,,,, 3,, 4,,, 1,,,, 3,, 4,,,, 1,,,, 3,, 4,,, Style Pneumatic ir-hydro size Through-hole (Standard) Mounting oth ends tapped uilt-in magnet Piping With rubber bumper Rear boss mount Through hole (Standard) Mounting oth ends tapped uilt-in magnet Piping Screw-in style With One-touch fitting Screw-in style Rear boss mount M X. M X. M X. M X. Note 1) mong those without an auto switch, only the mm stroke uses M X. piping. Note ) mong those with a built-in fitting, the mm stroke with the ø bore has the same outer dimensions as the mm stroke. Specifications M X. M X. (1) M X. Rc(PT)1/ Rc(PT) 1/ Rc(PT) 1/ Rc(PT) 1/4 ø/4 () ø/4 ø/ ø/ Rc(PT) 1/4 Rc(PT) 1/4 Rc(PT) 1/4 Rc(PT) 3/ Rc(PT) 3/ Style Pneumatic (Non-lube) ir-hydro Fluid ir Turbine oil (1) Proof pressure Max. operating pressure mbient and fluid temperature Rubber bumper Rod end thread Tolerance of rod end thread Tolerance of stroke length Mounting 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) None Female thread JIS class +1. Through-hole Piston speed to mm/s to mm/s Note 1) Refer to p.-43 for precautions. Note ) For applications involving lateral loads, refer to the "ateral oad Resistant Style" on p..3-. Minimum Operating Pressure size Pneumatic (Non-lube) ir-hydro..1 Intermediate Strokes Style Model No. Method Stroke range Example Standard body size,, to Stroke range 1 to 1 to 4 1 to Model No.: CQ- 1mm width spacer is installed in the standard CQ-. dimension is.mm. (1) M X. Rc(PT)1/ Refer to "How to Order" for standard model No. on p..3-. Intermediate strokes at 1mm increments are available by using a spacer with standard stroke cylinders... Exclusive body (-X) Rc(PT) 3/ Rc(PT) 3/ nit: MPa Specify "-X" at the end of the standard model No. shown on p..3-. Intermediate strokes at 1mm increments are available by using an exclusive body for required stroke. size Stroke range, to, to 4, to to to Model No. CQ--X Makes an exclusive body for mm stroke. dimension is.mm. 1) Consult us when intermediate strokes with a spacer are required for ø to ø rubber bumper models. ) Reference values for length dimensions are different in case of ø to ø exclusive body models (-X) with a stroke exceeding mm. Calculate length dimensions by deducting from those of or mm stroke models. 3) Refer to long stroke styles of CQ (P..3-) for strokes exceeding the stroke range..3-3 C CQS CQ M

Series CQ e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. llowable Kinetic Energy Table 1: oad weight and Piston speed size Standard allowable kinetic energy: Ea With rubber bumper allowable kinetic energy: Eb..3..43..1..1.1... (m1+m) V Kinetic energy E(J)= m1: Weight of cylinder operating part kg m: oad weight kg V: Piston speed m/s Table : Weight of cylinder operating part/without magnet 1 4 4 4 44 1 4 1 31 4 1 4 433 41 1 1 33 1 1 34 3 3 1 43 1 4 3 1 1 43 3 1 3 4 Cylinder stroke 1 4 1 1 31 4 4 4 34 3 34 1 1 1 3 3 1 3 Cylinder stroke 4 1 3 41 3 44 3 3 1 3 4 1 1 4 31 3 4 4 4 3 4 1 4 3 1 1 33 34 44 4 1 43 Table 3: Weight of cylinder operating part/with magnet Table 4 Rod end male thread Male thread portion Nut 1. With rubber bumper 3 Calculation example: CQ-CM Cylinder weight: CQ- 1g Option weight: 43g : With rubber bumper 3g 1g.3-4 1 3 4 1 3 1 [J] 1J.kgf/m.4. 1.3..1 3 1.4 nit: g 1 1 31 33 3 1 3 nit: g 4 1 3 1 1 34 4 44 3 3 1 Precautions Caution Snap Ring Installation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring)..1 4.4 nit: g 1 4 1 31 Without auto switch (anti-lateral) llowable lateral load W(N) llowable lateral load W(N). 4. 3.. 1...4.3. ø ø ø ø ø ø ø ø ø ø.1 Stroke St With auto switch (anti-lateral). 4. 3.. 1...4.3. w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. llowable ateral oad at Rod End ø ø ø ø ø ø ø ø ø ø.1 Stroke St (Mounting orientation: ateral) W

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Theoretical Force size Operation IN OT IN OT IN OT IN OT IN OT IN OT IN OT IN OT IN OT IN OT Mounting olt for CQ nit: N Operating pressure (MPa).3 34 4 1 4 1 41 31 3 4 41 3 1 1 3. 4 1 1 1 4 1 3. 1 4 344 4 3 1 1 1 31 3 Special long bolt for through-hole mounting is available. How to Order: Specify the required bolts. Example) olt M3 X l 4pcs. Weight size 4 1 3 1 3 3 Option Weight size oth ends tapped Rod end Male thread portion male thread Nut Rear boss mount With rubber bumper With One-touch fitting Foot mounting (including bolt) Front flange (including bolt) Rear flange (including bolt) ouble clevis (pin, snap ring, bolt) 1 41 4 1 Cylinder stroke 4 1 13 441 1 4 1 4 4 1 4 1 3 1 1 3 1 344 4 3 1 1 1 3 3 3 1. 1. 3 1.3 4 4 3 4 3 3 3 1 1 1 3 Calculation Example: CQ-CM Cylinder weight: CQ- Option weight: oth ends tapped With rubber bumper ouble clevis 1 3 3 1 1 1 1 1 13g g 43g 3g g 3g 4 3 4 1 34 3 1 43 33 34 33 1 31 4 44 1 3 1 1 4 34 4 nit: g 41 1 1 1 4 1 44 3 nit: g 4 4 1 4 1 4 31 1 1 1 1 C CQS CQ M Model No. CQ- - -1 - - - CQ- - -1 - - - CQ- - -1 - - - -3 - -4 - CQ- - -1 - - - -3 - -4 - C... 3 4 3 4 3 4 3 4 Mounting bolt M3 X l X l X 3 l X l X 4 l X l M3 X l X l X 3 l X l X 4 l X l M X l X l X 3 l X l X 4 l X l X l X l X l X l M X l X 3 l X l X 4 l X l X l X l X l X l X l Model No. C Mounting bolt Model No. C Mounting bolt CQ- - -1 - - - -3 - -4 - - - CQ- - -1 - - - -3 - -4 - - - CQ- -1 - - - -3 - -4 - - -.. 3 4 1 3 4 1 4 M X l X 3 l X l X 4 l X l X l X l X l X l X l X 1 l X l M X 3 l X l X 4 l X l X l X l X l X l X l X l X l X 1 l M X 4 l X l X l X l X l X l X l X l X l X l X l CQ- -1 - - - -3 - -4 - - - CQ- -1 - - - -3 - -4 - - - CQ- -1 - - - -3 - -4 - - -. 1 1. 1 1 1 1 M X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X 1 l X 1 l M X l X l X l X l X l X l X l X l X l X 1 l X l.3-

Series CQ Construction Component Parts No. q w e r t y u i escription Cylinder tube Piston Piston rod Collar Snap ring ushing Rod end nut umper Replacement Parts: Seal Kits Style Pneumatic style size Material Note luminum alloy Hard anodized luminum alloy Chromated Stainless steel ø to ø Carbon steel ø to ø, Hard chrome plated luminum bearing alloy ø to ø, nodized luminum alloy casting ø to ø, Chromated, plated Carbon tool steel Phosphate coating ead bronze casting For ø or larger Carbon steel Nickel plated rethane Kit No. CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS Contents uto Switch Mounting rackets Parts No. size / / / / / Mounting bracket part No. Q-1 Q- Note Switch mounting screw (M3 X. X l) Square nut Switch mounting screw (M3 X. X l) Switch spacer Switch mounting nut Kits include items!,!3 and!4 from the table above. No. o!!1!!3!4 pplicable switch Reed switch Solid state switch -, -3C, C -H, H -W -F, J -FV -JC -FW, JW -FWV -F -FF -FNT escription umper Guide boss ring One-touch fitting Piston seal Rod seal Gasket Material Resin luminum alloy NR NR NR Replacement Parts: Seal Kits Note Hard anodized ø to ø ø to ø Style size Kit No. Contents CQH-PS CQH-PS CQH-PS ir-hydro Kits include items!, CQH-PS style!3 and!4 from the CQH-PS table above. CQH-PS CQH-PS CQH-PS Seal kits consist of items!,!3 and!4 contained in one kit, and can be ordered using the order number for each respective tube bore size. [Stainless steel mounting bolt set] The set of stainless steel mounting screws (with nuts) described below is available and can be used depending on the operating environment. (The spacers for auto switches must be ordered separately, as they are not included.) : For -//F/J types The stainless steel bolts described above are used when the -F type switch is shipped mounted on a cylinder. When the switches are shipped as individual parts, the set is included..3-

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Clean Series Copper Free CQ size Stroke (M) Clean series Relief style Vacuum style ø, ø, ø, ø, ø, ø, ø, ø The rod portion of the actuator has a double seal construction, and a relief port is provided to discharge the exhaust air directly outside of the clean room. Thus, it can be used in a Class clean room. CQ size Stroke (C)(M) Copper free series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Specifications Specifications ction ouble acting single rod ction ouble acting single rod Cylinder bore size ø, ø, ø, ø, ø, ø, ø, ø Cylinder bore size ø, ø, ø, ø, ø, ø, ø, ø, ø, ø Proof pressure 1.MPa Proof pressure 1.MPa Max. operating pressure 1.MPa Max. operating pressure 1.MPa Rubber bumper None (1) Rubber bumper With, Without Piping method Screw-in piping Piston speed to mm/s Mounting Through-hole uto switch ttachable Note 1) ø with switch: With rubber bumper (Standard) Piping method Piston speed Mounting uto switch Screw-in piping to mm/s Through-hole, oth ends tapped ttachable C CQS CQ Construction Water Resistant M CQ Mounting size R Stroke Option F -XC With auto switch (uilt-in magnet) Made to Order Water resistant cylinder R V Seal NR (Nitril rubber) Seal FKM (Fluoro rubber) Water resistant color indication solid state switch This is ideal for use in a machine tool environment exposed to coolant. It is also well suited for use in areas in which water splashes, such as food processing equipment or car washers. relief port is provided in the area between the double rod seals to discharge the exhaust air outside of the clean room. Thus, the amount of dust generated has been reduced to 1/ of that of an ordinary cylinder. Structurally identical to the "-" series, the outer rod seal has been removed to evacuate through the vacuum port. This draws out any external air from the clearance between the rod and the cover to practically eliminate the generation of external dust. This should be used in an application that requires an even higher level of cleanliness than the "-" series. Specifications ction ouble acting Single rod size ø, ø, ø, ø, ø, ø, ø, ø Cushion None uto switch mounting Rail mounting (-F) Made to Order Piston rod, Rod end nut: Stainless steel (XC) Specifications except mentioned above are same as standard basic..3-

Series CQ uto Switch Specifications Refer to p..3- for details of auto switch. pplicable uto Switch Minimum Strokes for uto Switch Mounting Number of auto switches 1pc. pcs. -FV -JC -FV - - -3C -C -V -FWV -FWV 1 -H -H -F -J -F -FP -FW 1 1 -W 1 -FW -JW -F -FF -F -FF - -FN Style uto switch model Electrical entry (Function) Page Reed switch Solid state switch -/ -H/H -3C/C -W - -V -F/J -FV -JC -FW/JW -FWV -F -FF -F -FNT -F -FV -FW -FWV -FF Grommet (Perpendicular) Grommet (In-line) Connector Grommet ( color, Perpendicular) Grommet (In-line) Grommet (Perpendicular) Grommet (In-line) Grommet (Perpendicular) Connector Grommet ( color, In-line) Grommet ( color, Perpendicular) Grommet ( color, Water resistant, In-line) Grommet ( color, With diagnosis output, In-line) Grommet ( color, Water resistant, In-line) Grommet (With timer, In-line) Grommet (In-line) Grommet (Perpendicular) Grommet ( color, In-line) Grommet ( color, Perpendicular) Grommet ( color, atch with diagnostic output, In-line) ø to ø ø to ø ø to ø ø to ø.3-.3-1.3-.3-.3-1.3-.3-34.3-3.3-3.3-44.3-4.3-.3-3.3-.3-.3-3.3-3.3-.3-.3- Precautions e sure to read before handling. Refer to p.-3 to -43 for common precautions when auto switch is used. Weight 4 3 4 1 nit: g Cylinder stroke 4 1 4 1 1 3 1 1 1 31 4 1 4 3 3 1 4 3 3 4 31 41 33 444 4 4 1 3 4 33 3 4 4 1 3 1 1 41 3 3 4 3 1 1 1 1 4 3 41 3 44 34 34 Weight/uto Switch Mounting racket Part No. Q-1 Q- size ø to ø ø to ø Weight (g) 1. 1. Refer to p..3- for auto switch weight. Option Weights size oth ends tapped 1 Rod end male thread Male thread Nut 1. 1 Rear boss mount With rubber bumper With One-touch fitting Foot (including bolt) Front flange (including bolt) Rear flange (including bolt) ouble clevis (including pin, snap ring, bolt). 4 4 1 3 1.3 1 3 Calculation example: CQ-CM Cylinder weight: CQ- Option weight: oth ends tapped With rubber bumper ouble clevis 3 4 1 4 g g 43g 3g g 44g 3 3 3 4 1 1 3 3 1 1 1 3 1 43 33 34 nit: g 1 4 4 3 1 4 1 4 1 31 1 4 34 1 1 1 1 33 4 1 1 If auto switches are to be installed, the weight that corresponds to the numberof auto switches and mounting brackets to be used must be added..3-

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Construction Components Parts No. q w e r t y u i o! escription Cylinder tube Piston Piston rod Collar Snap ring ushing Magnet Piston seal Rod seal Gasket Material luminum alloy luminum alloy Stainless steel Carbon steel luminum bearing alloy luminum alloy casting Carbon tool steel ead bronze casting NR NR NR Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø to ø, Chromated, plated Phosphate coating For ø or larger Replacement Parts: Seal Kits Series size Kit No. Contents CQ-PS CQ-PS CQ-PS CQ-PS Kits include items i, Pneumatic CQ-PS o and! from the CQ-PS table above. CQ-PS CQ-PS CQ-PS CQ-PS Mounting olt for CQ with uto Switch Special long bolt for through hole mounting is available as option. How to Order: Specify the required bolts. Example) olt M3 X 3 l pcs. Replacement Parts: Seal Kits Series ir-hydro size Kit No. CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS Contents Kits include items i, o and! from the table above. Seal kits consist of items i, o and! contained in one kit and can be ordered using the order number for each respective tube bore size. C CQS CQ M Model CQ- - -1 - - - CQ- - -1 - - - CQ- - -1 - - - -3 - -4 - CQ- - -1 - - - -3 - -4 - C... 3 4 4 4 4 Mounting bolt M3 X 3l X l X 4 l X l X l X l M3 X l X 4 l X l X l X l X l M X l X 4 l X l X l X l X l X l X l X l X l M X l X 4 l X l X l X l X l X l X l X l X l Model CQ- - -1 - - - -3 - -4 - - - CQ- - -1 - - - -3 - -4 - - - CQ- -1 - - - -3 - -4 - - - C.. Mounting bolt M X l 4 X 4 l X l X l X l X l X l X l X l X l 1 X 1 l X l 4 M X 4 l X l X l X l X l X l X l X l X l X l X l 1 X 1 l M X l X l X l X l X l X l X l X l X l X l X l Model CQ- -1 - - - -3 - -4 - - - CQ- -1 - - - -3 - -4 - - - CQ- -1 - - - -3 - -4 - - - C. 1 1. Mounting bolt M X l X l X l X l X l X l X l X l X l X l 1 X 1 l M X l X l X l X l X l X l X l X l X l 1 X 1 l 1 X 1 l M X l X l X l X l X l X l X l 1 X 1 l X l 1 X 1 l X l.3-

Series CQ ø to ø oth ends tapped: CQ Standard (Through-hole)/CQ oth ends tapped size O1 M4 X. M4 X. M X 1. M X 1. R Rear boss mount Rear boss mount G 1. 1. Th 1 -.43 -. -.43 1 -.43 Note) Rod side with guide boss: Option (Specify -XC3 at end of model no.) C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. Standard Stroke range to to to to. 4. 1 1. 1.. C E 3 F... H M3 X. M4 X. M X. M X 1. I 3 4 K 3. 3. 4. M 1.. N 3. 3... O. epth 3.. epth 3. epth epth Q. Z Note) imensions of model with rubber bumper are same as mentioned above. Refer to p..3-1 for rod edge nut and optional bracket. Standard SCQ size, #1(#1+#) Rear boss mount SCQ size, # (#+#) Refer to p..3-3 for calculation of cylinder length with intermediate stroke..3-

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Foot/CQ Foot Stroke range to to to to 3.3 3. 41. 44. 1 1. 1..... 1 1 4... 4. 4... G.. 4 4 H 1 1 4 S... T 3. 3. X 34 3 4 Y. 33. 4 4 Z 44 4 X.. Y 4... Front flange/cqf Rear flange/cqg Front flange Stroke range to to to to Rear flange. 34 3. Stroke range to to to to 1 1. 1... 3. F 4. 4... 3. 3. 4. 1 FT.. 1. 1.. FV 3 4 FX 4 4 4 FZ 4... 1 1 4... ll dimensions except "'', "" and "1'' are same as rod side flange type. C CQS CQ M ouble clevis/cq ouble clevis Stroke to to to to. 43 1. 1 1. 1.. C C CT C CW CX CZ 34. 3 4 4. 4 4 1 1. Refer to p..3-1 for rod end nut and optional brackets. Clavis pin and snap ring are contained. Foot SCQ size, #(#+#) Front Flange SCQ size, #3(#3+#) Rear Flange SCQ size, #4(#4+#) ouble Clevis SCQ size, #(#+#) 3. 3. 4. 1 1. 1.. N M4 X. M4 X. M X 1. M X 1. RR.3-

Series CQ ø to ø With uto Switch oth ends tapped: CQ Standard (Through-hole)/CQ oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R Rear boss mount Rear boss mount G 1. 1. Th 1 -.43 -. -.43 1 -.43 Note1) Rod side with guide boss: Option (Specify "XC3'' at end of model no.) C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. Standard Stroke range to to to to 31. 34 3 3.. 31.. C E 3 4 F.... H M3 X. M4 X. M X. M X 1. K 3. 3. 4. M 3 N 3. 3... O. epth 3.. epth 3. epth epth Q. S 3. 41. 4 3. 1.. 4.. V 3 Standard SCQ size #1(#1+#+#) Rear boss mount SCQ size #(#+#+#) Note ) imensions with rubber bumper are same as standard shown above. Refer to p..3-1 for rod end nut and optional brackets. Note 3) Refer to p..3-3 for calculation of cylinder length with intermediate stroke..3-

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Foot Stroke range to to to to 1 G H S T 4.3. 4 4.. 1 4.... 4.. 1 1. 3. 31.... 4 4 1. 3. 4.. 1.. 4 1. 3. X Y 34. 3 33. 4 4 4 Z 44 4 X Y 4..... Front flange Stroke range to to to to 41. 44 4 4.. 31.. F 4. 4... FT.. FV 3 4 FX 4 4 4 FZ 4... 1 1 4... Rear flange Stroke range to to to to 3 3. 44 4. 3. 3. 4. 1 1. 1.. ll dimensions except "'', "'' and and "1" are same as Rod side flange type. C CQS CQ M ouble clevis Stroke range to to to to 1.. C C CT C CW CX CZ. 31.. 4. 4 4. Refer to p..3-1 for rod end nut and optional brackets. Clavis pin and snap ring are contained. Foot SCQ size, #(#+#+#) Front Flange SCQ size, #3(#3+#+#) Rear Flange SCQ size, #4(#4+#+#) ouble Clevis SCQ size, #(#+#+#) 4 4 1 1. 3. 3. 4. 1 1. 1.. N M4 X. M4 X. M X 1. M X 1. RR.3-

Series CQ/CQ ø to ø With uto Switch For those without auto switches, refer to the dimension chart because their,, F, P and Q dimensions will differ. Standard (Through-hole)/CQ, CQ oth ends tapped O1 M X 1. M X 1. M X 1. R Rear boss mount Th 1.. 3. C1 X. 3.. 3.. H1 M X 1. M X 1. M1 X 1. 1.. 33. uilt-in One-touch fitting/ø to ø uilt-in One-touch fitting Z1 P1 V W1 3.. Standard uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. Stroke range Without auto switch With auto switch C E H F P Q F P Q. M X.. to 3,. 33 Rc(PT)1/. 33. Rc(PT)1/. 4 M X 1. to 3.., 4. 3. Rc(PT)1/ 4. 3. Rc(PT)1/ M X 1. to 3.., 4... Rc(PT)1/4. 4... Rc(PT)1/4. 1 4 M X 1. I J 4. K 1 M 34 N O S Z Standard SCQ size, #1 (#1+#+#) Rear boss mount SCQ size, # (#+#+#)... epth. epth epth 31. 3 41 1 Note 1) imensions of style with rubber bumper are same as standard shown above. Refer to p..3-1 for rod end nut and optional bracket. Note ) ecause the method for calculating the longitudinal dimension of the intermediate stroke varies between the spacer-installed style and the special body (-X) style, refer to p..3-3 for details..3-

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Foot/CQ, CQ Foot Stroke range to, to, to, Z X Y W/o auto switch With auto switch S S 4. 3. 33 1. 33 1 3.... 3.. 3. 3........ 1. 3. 1. 1 1 1 1 3. 3. 43. G.. 4 4 H 33 3 T 3. 3. 3. X 4 Y 4 1.... Front flange/cqf Front flange Stroke range to, to, to, Without auto switch 3 33 4... 3. 4.... With auto switch 33. 3... F... FT FV 4 4 FX FZ 1 1 1 1 M 3. 34 3. 43. C CQS CQ M Rear flange/cqg, CQG Rear flange Stroke range to, to, to, Without auto switch With auto switch 3 4 4 44. 4. 4. 4... 1.. 33. ll dimensions except, and 1 are same as rod side flange mounting type. ouble clevis/cq, CQ ouble clevis Stroke range W/o auto switch With auto switch C CT C CW CX CZ C C to, 3 33 33 1 3. 3.. to......,... to,.... 3.. 1 3 44 N M X 1. RR 1.. 33. M X 1. M X 1. Refer to p..3-1 for rod end nut and optional brackets. Clevis pin and snap ring are contained. Foot SCQ size, # (#+#+#) Front Flange SCQ size, #3 (#3+#+#) Rear Flange SCQ size, #4 (#4+#+#) ouble Clevis SCQ size, # (#+#+#) The diagram shows with an auto switch, which may be deleted if unnecessary..3-1

Series CQ/CQ ø to ø Standard (Through-hole) With uto Switch For those without auto switches, refer to the dimension chart because their, and Q dimensions will differ. oth ends tapped: CQ, CQ oth ends tapped O1 M X 1. M X 1. M X 1. R 1 Rear boss mount Rear boss mount Th 3. 43..4 Note 1) Rod side with guide boss: Option (Specify -XC3 at end of model no.) Standard (Through-hole) C1 X.. 3.. 3. H1 M1 X 1. M X 1. M X 1. 1 33. 43. 43. uilt-in One-touch fitting Z1 P1 V. W1 Standard uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. Head side with guide boss W/o auto switch With auto switch C E F H I J K M to, 44 4 3 4 4 4 1. M X 1. 3 1 to, 3.. 43. 3.. 3. 1. M X. 1 to 3, M X. 1. 4 mm Z N O P epth. Rc(PT)1/4 1. epth. Rc(PT)3/ 1. epth. Rc(PT)3/ Note ) imensions of style with rubber bumper are same as standard shown above. Refer to p..3-1 for rod end nut and optional brackets. Note 3) Refer to p..3-3 for calculation of cylinder length with intermediate stroke. Q 1 3 S 3 1. 1. 4... 1 Standard type CQ SCQ, #1 CQ SCQ, #1 CQ SCQ, #1 Rear boss mount dd # (drawings of guide boss)..3- The diagram shows with an auto switch, which may be deleted if unnecessary.

Compact Cylinder/Standard: ouble cting Single Rod Series CQ C CQS CQ Foot Stroke range to, to, to, W/o auto switch With auto switch. 3. 4. 4 3. 43. 3. 3 1 1 43. 3. 3. G H 4 1 S 3. T X 3. 4. Rear flange Stroke range to, to, to, W/o auto switch With auto switch 3 4. 4. 4. 1 33. 43. 43. ll dimensions except "", "" and "1" are same as rod side flange type. M Front flange Stroke range to, to, to, Stroke range to, to, to, Y Z X Y 1. 1. 1 1 1. 3. W/o auto switch With auto switch 4 3 4 4 4 4 3. 3.. 3. 43. 3. 3 F FT FV FX 1 FZ 4 1 1 M 43. 3. 3. 4 ouble clevis Stroke range to, to, to, Stroke range to, to, to, W/o auto switch With auto switch C C CT C CW CX.. 3 4 43. 3. 1 3. 4 3. 1 4 1. 31 3 4 1 33. 43. 43. Refer to p..3-1 for rod end nut and optional brackets. Clevis pin and snap ring are contained. N M X 1. M X 1. M X 1. RR 1 CZ 44 4 Foot SCQ size # (#+#+#) Front Flange SCQ size #3 (#3+#+#) Rear Flange SCQ size #4 (#4+#+#) ouble Clevis SCQ size # (#+#+#).3-1

Series CQ ccessories Single knuckle joint ouble knuckle joint I-G, I-Z1 I-G, I-G3 I-G4, I-G I-G, I-G Y-G, Y-Z1 Y-G, Y-G3 Y-G4, Y-G Y-G, Y-G Material: Rolled steel Material: Cast steel Material: Rolled steel Material: Cast steel Part No. I-G I-Z1 I-G I-G3 I-G4 I-G I-G I-G size,, 1. 34 41 4 1 1.. 1 1 1 E1 ø ø ø3 ø44 1 MM M X. M X 1 M X 1. M X 1. M X 1. M1 X 1. M X 1. M X 1. R R1.3.1.3. 1 4 1. 31 NH 1 NX +.4..4 +.4.1.4.3 +...4 +...4 +..3 1. +..3. +..3. +.4.3. Part No. Y-G Y-Z1 Y-G Y-G3 Y-G4 Y-G Y-G Y-G size,, 1. 34 41 4 1 1.. 3 4 E1 ø ø ø3 ø44 1 1 MM M X. M X 1 M X 1. M X 1. M X 1. M1 X 1. M X 1. M X 1. Knuckel pin and snap ring are contained. R R1 1 NH.3.1.3. 1 4. 31 1 NX +.4.4. +.4.. +..4. +..4. +.. 1.3 +...3 +...3 +.4..3 NZ Pin part No. 3 44 4.. 1. 41.. 4 IY-G IY-J1 IY-G IY-G3 IY-G4 IY-G IY-G IY-G Knuckle pin (Common with double clevis pin) Rod end nut Part No. IY-G IY-J1 IY-G IY-G3 IY-G4 IY-G IY-G IY-G size,, d 1............3..3.... 1. 41.. 4 d 4. 4.....4 1 1 l.... 3. 44.. 4. m 1. 1. 1. 1. 1.... Material: Carbon steel t... 1.1 1.1 1.1 1.3 1.3 Snap ring For axis C shaped For axis C shaped For axis C shaped For axis C shaped For axis C shaped For axis C shaped For axis C shaped 1 For axis C shaped Part No. NTJ-1 NT-1 NT- NT-3 NT-4 NT- NT- NT- size,, d M X. M X 1 M X 1. M X 1. M X 1. M1 X 1. M X 1. M X 1. H 4 Material: Carbon steel 1 41 C.. 1. 1..4 31. 3. 4.3 (ccessory) SCQ size, #.3-1

Compact Cylinder/Standard: ouble cting Single Rod Series CQ Joint for CQ/ø to ø type mounting bracket Joint/Mounting racket Part No. ( type, type) Part No. size ø E F M T1 T Y 3 Mounting bracket Y Y Y type mounting bracket type mounting bracket Joint llowable Eccentricity size Eccentricity pplicable bore size 3 For ø, ø For ø, ø For ø For ø mm ø ø ø ø ø ø ±1 ±1. ± Y-3 Y- Y- Y- Part No. Y-3 Y- Y- Y-,, size,, 1 31 K. 1 3 M 3 type mounting bracket 4 Weight (g) 1 3.... 1 C CQS CQ Play. <How to Order> joint is not included with the or type mounting brackets, and they must be ordered together. (Example) For bore size ø Part No. type mounting bracket part No. Y-3 Joint Y-3 M Joint Part No. size Joint part No. pplicable mounting bracket bracket bracket Weight (g) ø, Y-3 Y-3 Y-3 ø, ø ø Y- Y- Y- Y- Y- Y- Y- Y- Y- Part No. Y-3 size, ø E J M 34 O. epth. Y-, 4. epth. Y- 3 1 epth Y- 1 1 1 epth Part No. size T1 T V W S Weight (g) Part No. Y-3 size ø, ø C d1 d H K T Weight (g) 1 1. M X 1. Y-3 Y-,,.. 1 Y- Y- Y- ø, ø ø ø 1 1. 4.. 1 3 M X 1. M X M X. Y- Y-.. 1 3 1 4.3-1

Series CQ uto Switch Mounting Position (at Stroke End) and Mounting Height - - ø to ø ø to ø -H -H -F -J -FW -JW -FF -FNT -F ø to ø ø to ø -3C -C -JC ø to ø ø to ø -W -FWV -FV ø to ø ø to ø ø to ø - -F -V -FV -FWV -FW -F.3-

size 4...... 1. 1..... 1 4... 1 1.... 1 1. 4.... 1 1. 3. 4 4. 3. 1. 1.. 1. 1. 1.... 1....... 1 3.. 4.. 1. 1 1 1. 1. 3... -/ -H/H -3C/C -F/J -FV/JC -W -FW -F -FW -FF -JW -FWV - -V -F -FV -FW -FWV -F uto Switch Mounting Position size 1.. 4.. 31. 3 41 4.... 3.... 3 4 4..... 31. 34. 3. 4 4 4. 4. 4. 3 31 3 3. 44. 1 1 1 31 34 3 41. 4. 4 4 4 34 3. 43.. 3.. 3. 4. 3 3. 4.. -/ -H -H -F -J -FW -JW -F -FF -FNT -3C -C -FV -FWV -JC -W -V -FV -FWV uto Switch Mounting Height -FW -F uto Switch Mounting Mount the auto switch as fugure below. ø to ø ø to ø C CQS CQ M.3-1 Compact Cylinder/Standard: ouble cting Single Rod Series CQ

Compact Cylinder/Standard: ouble cting ouble Rod Series CQW ø, ø, ø, ø, ø, ø, ø, ø, ø, ø How to Order Standard CQW With auto switch CQW 3 S H F With auto switch (uilt-in magnet) Mounting racket Part No. size mm mm mm mm mm Style Pneumatic ir-hydro (1) Note 1) ir-hydro bore size: ø to ø size mm mm mm mm mm Piping Screw-in piping With One-touch fitting () Note ) size of type with One-touch fitting: ø to ø ir-hydro is not available. Foot (4) CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- CQ- Flange CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F Note 4) When ordering foot type brackets, pcs. should be ordered for each cylinder. Note ) The parts included with each mounting bracket are as follows. Foot, Flange: ody mounting bolts. Mounting Foot Flange Through-hole (standard) oth ends tapped F Mounting brackets are shipped not assembled with the cylinder. Reed switch Indicator ction ouble acting Refer to Standard stroke table on p..3-3. Without auto switch (uilt-in magnet) Refer to table below for auto switch model No. pplicable uto Switches/Refer to p..3- for further information on auto switch. Solid state switch Yes No Yes No Yes Yes Stroke uto switch Style Special function oad voltage Rail mounting irect mounting Electrical Wiring entry (Output) ø to ø ø to ø C C Perp. In-line Perp. In-line 3 wire (Equiv. NPN) V H V V H Grommet 3 3H V V 3V 3 wire V, V V H V 4V V 3C Connector V, V 4V C iagnostic ( color) Grommet W 3 wire V, V FNV F (NPN) V FNV FN 3 wire V, V FPV FP Grommet (PNP) FPV FP FV J wire V FV F Connector JC 3 wire V, V FNWV FW (NPN) 4V V FNWV FNW iagnostic ( color) 3 wire V, V FPW (PNP) FPWV FPW Grommet V FWV JW FWV FW Water resistant ( color) wire F F With timer 3 wire (NPN) FNT V, V isgnostic output ( color) FF 4 wire iagnostic output (NPN) FF atch ( color) ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switches marked with a are manufactured upon receipt of order. Refer to p..3-3 for part No. of auto switch mounting brackets. ody option C M Number of auto switches S 1 n n Standard (Rod end female thread) With rubber bumper (3) Combination of body option (CM) is possible. Note 3) Rubber bumper for air-hydro is not available. ead wire (m). () 3 () (Z) None (N) pplicable load Relay, PC Relay, PC.3-

Compact Cylinder/Standard: ouble cting ouble Rod Series CQW Style Pneumatic ir-hydro size Through hole (Standard) Mounting oth ends tapped uilt-in magnet Screw-in style Piping One-touch fitting With rubber bumper Through hole (Standard) Mounting oth ends tapped uilt-in magnet Piping Screw-in style M X. M X. M X. M X. M X. M X. (1) M X. Rc(PT)1/ ø/4 () (1) M X. Rc(PT)1/ Rc(PT) 1/ ø/4 ø/ ø/ Rc(PT) 1/ Rc(PT) 1/4 Rc(PT) 1/4 Rc(PT) 1/4 Rc(PT) 1/4 Note 1) Without auto switch, stroke: M X. Note ) uilt-in fitting: imensions of ø, stroke are same as cylinder tube with stroke. Rc(PT) 3/ Rc(PT) 3/ Rc(PT) 3/ Rc(PT) 3/ Order Made Made to Order Refer to p..4-1 for common made to order specifications and p..4- for individual specifications. Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. Caution Snap Ring Installation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Mounting q When removing a load, be sure to secure the wrench flats of the piston rod on the load side. w If this is done without securing the piston rod on the load side, be aware that the coupled (screwed-in) portion of the piston rod could become loosened. Specifications Style Fluid Proof pressure Max. operating pressure mbient and fluid temperature Rubber bumper Rod end thread Tolerance of rod end thread Tolerance of stroke length Mounting Piston speed Note 3) Refer to p.-43 for cautions on use. Minimum Operating Pressure size Pneumatic (Non-lube). ir-hydro size Standard. With rubber bumper.43 Standard Stroke. llowable Kinetic Energy Pneumatic (Non-lube) size,,,,,.3. Pneumatic (Non-lube) ir hydro ir Turbine oil (3) 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) None Female thread JIS class +1. Through-hole to mm/s to mm/s..1.. Standard stroke,, 1,,,,, 1,,,, 3,, 4,,, 1,,,, 3,,,,, 1,,,, 3,, 4,,,..1..1..1.1..... ir-hydro uto Switch Mounting racket Part No. size,,,,, Part No. Q-1 Q- Note Switch mounting screw (M3 X. X l) Square nut Switch mounting screw (M3 X. X l) Switch spacer Switch mounting nut size,,,,...4.1... 1.4 nit: MPa.... 1.3.1 Standard stroke,, 1,,,, 3,, 4,, 1,,,, 3,, 4,,, nit: J. 4.4 pplicable switch Reed switch Solid state switch -F, J -FV -, -JC -3C, C -FW, JW -H, H -FWV -W -F -FF -FNT.3-3 C CQS CQ M

Series CQW Theoretical Force size.3 nit: N Operating pressure(mpa) 4 1 1 31 4 41 1. 4 1. 4 4 3 1 31 Mounting olt for CQW Special long bolt for through-hole mounting is available as option. How to Order: Specify the required bolts Example) olt M3 X 3 l 4pcs. Weight size 4 1 4 4 3 41 1 44 34 3 4 1 3 1 3 1 344 Option Weights Cylinder stroke 1 4 3 4 4 4 4 3 44 31 1 3 1 1 3 4 3 1 1 14 3 34 14 size oth ends tapped Rod end male thread Male thread Nut 3 4 4 Rubber bumper One-touch fitting Foot (including bolt) Flange (including bolt) 1 1 1 1 Calculation example: CQWF-CM Cylinder weight: CQW- Option weight: oth ends tapped Rod end nut With rubber bumper Flange 34 3 1 1 4 3 43 4 1 3 4 34 g g g 3g 1g 3g 4 1 33 4 4 1 1 333 3 nit: g 1 3 3 44 nit: g 1 4 4 3 4 34 1 34 3 1 Model CQW- - -1 - - - CQW- - -1 - - - CQW- - -1 - - - -3 - -4 - CQW- - -1 - - - -3 - -4 - C.3. 3 4 3 4 3 4 3 4 Mounting bolt M3 X 3 l X l X 4 l X l X l X l M3 X 3 l X l X 4 l X l X l X l X l X 3 l X l X 4 l X l X l X l X l X l X l M X 3 l X l X 4 l X l X l X l X l X l X l X l Model CQW- - -1 - - - -3 - -4 - - - CQW- - -1 - - - -3 - -4 - - - CQW- -1 - - - -3 - -4 - - - C.. 3 4 1 4 1 1 1 Mounting bolt M X 3 l X l X 4 l X l X l X l X l X l X l X l X l X 1 l M X 4 l X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X 1 l X 1 l Model CQW- -1 - - - -3 - -4 - - - CQW- -1 - - - -3 - -4 - - - CQW- -1 - - - -3 - -4 - - - C.. 1 1 1 1 Mounting bolt M X l X l X l X l X l X l X l X l X l X 1 l X 1 l M X l X l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X 1 l X l X 1 l.3-4

Compact Cylinder/Standard: ouble cting ouble Rod Series CQW Construction Component Parts No. q w e r t y u i o escription Cylinder tube Piston Piston rod Piston rod Collar Snap ring ushing Rod end nut umper! One-touch fitting!1 Rod seal! Piston seal!3 Tube gasket!4 Piston gasket Material luminum alloy luminum alloy Stainless steel Carbon steel Stainless steel Carbon steel luminum bearing alloy luminum alloy casting Carbon tool steel ead bronze casting Carbon steel rethane NR NR NR NR Note Hard anodized Chromated ø to ø ø to ø, Hard chromated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø to ø, Chromated, plated Phosphate coating For ø or larger Nickel plated ø to ø Replacement Parts: Seal Kits (Pneumatic) size Kit No. Contains CQW-PS CQW-PS CQW-PS CQW-PS CQW-PS CQW-PS CQW-PS CQW-PS CQW-PS CQW-PS Kits include items!1,! and!3 from the table above. Copper Free Replacements Parts: Seal Kits (ir-hydro) size Kit No. Contains CQWH-PS CQWH-PS CQWH-PS CQWH-PS CQWH-PS CQWH-PS CQWH-PS CQWH-PS Kits include items!1,! and!3 from the table above. Seal kits consist of items!1,! and!3 contained in one kit, and can be ordered using the kit number for each respective tube bore size. C CQS CQ M CQW size Stroke (C) (M) Copper free ø, ø, ø, ø, ø, ø, ø ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Specifications ction size Proof pressure Max. operating press. Rubber bumper Piping Piston speed Mounting uto switch ouble acting double rod ø, ø, ø, ø, ø, ø, ø, ø, ø, ø 1.MPa 1.MPa None Screw-in piping to mm/s Through-hole ttachable.3-

Series CQ uto Switch Specifications Refer to p..3- for details of auto switch. How to Order Refer to p..3- for How to Order. Weight 1 4 Minimum Strokes for uto Switch Mounting Number of auto switches nit: g Cylinder stroke 1 1 1 1 1 1 1 4 1 1 33 31 4 1 3 343 44 3 3 3 3 4 31 4 1 41 4 1 31 43 1 33 4 4 4 4 3 1 33 1 1 3 1 3 1 1 4 1 3334 1 343 3 3 31 Weight/uto Switch Mounting racket Part No. Q-1 Q- size ø to ø ø to ø Weight (g) 1. 1. Refer to p..3- for auto switch weight. Construction 1 -FV -JC -FV - - -3C -C -V - -FWV -FWV 1 Option Weights -H -H -F -J -F -FP -FW 1 1 1 -FW -JW -W -F -FF -FN -FF -F nit: g size oth end tapped 1 1 3 3 1 4 4 Rod end Male thread 3 4 4 3 male thread Nut 4 34 34 4 4 Rubber bumper 3 1 34 4 One-touch fitting 1 1 Foot (including bolt) 1 1 34 3 1 Flange (including bolt) 4 1 1 33 Calculation example: CQWF-CM If auto switches are to be installed, Cylinder weight: CQW- 31g the weight that corresponds to the Option weight: oth ends tapped g number of auto switches and g mounting brackets to be used With rubber bumper 3g must be added. Front flange 1g g Component Parts No. q w e r escription Cylinder tube Piston Piston rod Piston rod t Collar y Snap ring u ushing i Magnet o Rod seal! Piston seal!1 Tube gasket! Piston gasket Material luminum alloy luminum alloy Stainless steel Carbon steel Stainless steel Carbon steel luminum bearing alloy luminum alloy casting Carbon tool steel ead bronze casting NR NR NR NR Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø to ø, Chromated Phosphate coating For ø or larger Replacement Parts: Seal Kits (Pneumatic) size Kit No. Contents CQW-PS CQW-PS CQW-PS CQW-PS Kits include items o,! and!1 CQW-PS from the table above. CQW-PS CQW-PS CQW-PS CQW-PS CQW-PS Seal kits consist of items o,! and!1 contained in one kit, and can be ordered using the kit number for each respective tube bore size..3- Replacement Parts: Seal Kits (ir-hydro) size Kit No. Contents CQWH-PS CQWH-PS CQWH-PS CQWH-PS Kits include items o,! and!1 from the table above. CQWH-PS CQWH-PS CQWH-PS CQWH-PS Seal kits consist of items o,! and!1 contained in one kit, and can be ordered using the kit number for each respective tube bore size.

Compact Cylinder/Standard: ouble cting ouble Rod Series CQW Mounting olt for CQ with uto Switch Special long bolt for through-hole mounting is available as option. How to Order: Specify the required bolts. Example) olt M3 X l 4pcs. Model CQW-C -C -1C -C -C -C CQW- - -1 - - - CQW- - -1 - - - -3 - -4 - CQW- - -1 - - - -3 - -4 - C.1. 4 4 4 4 Mounting bolt M3 X l X 4 l X l X l X l X l M3 X 4 l X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l Model CQW- - -1 - - - -3 - -4 - - - CQW- - -1 - - - -3 - -4 - - - CQW- -1 - - - -3 - -4 - - - C.. 4 1 1 1 1 Mounting bolt M X 4 l X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X 1 l X 1 l Model CQW- -1 - - - -3 - -4 - - - CQW- -1 - - - -3 - -4 - - - CQW- -1 - - - -3 - -4 - - - C.. 1 1 1 1 1 Mounting bolt M X l X l X l X l X l X l X l X l X l X 1 l X 1 l M X l X l X l X l X l X l X l X l X 1 l X l X l M X l X l X l X l X l X l X 1 l X l X l X l X 1 l C CQS CQ M.3-

uto Switch Mounting Position 4..... 1. 1... 1 1.. 31.... 1... 1. 1.... 1 1..... 1 1.. 1. 1. 1.. 1 1. 1. 1 3. 33. 3... 1. 1.... 4. 4. 3. 34. 1 1. 1. 3 1. 1 3.. 31 33. -/ -H, H -3C, C -F, J -FV, JC -W -F -FW -FF -JW -FWV - -V -F -FV -FW -FWV -F uto Switch Mounting Height 1.. 4.. 31. 3 41 4.... 3.... 3 4 4..... 31. 34. 3. 4 4 4. 4. 4. 3 31 3 3. 44. 1 1 1 31 34 3 41. 4. 4 4 4 34 3. 43.. 3.. 3. 4. 3 3. 4.. -/ -H -H -F -J -FW -JW -F -FF -FNT -3C -C -FV -FWV -JC -W -V -FV -FWV -FW -F - -F - -FV -FWV -FW - - -H, -H -F, -J -FW, -JW -FF, -FNT -F -3C -C -JC -W -FWV -FV ø to ø ø to ø.3- Series CQW/CQW uto Switch Mounting Position (at Stroke End) and Mounting Height

Series CQW/CQW ø to ø Without uto Switch Standard (Through-hole)/CQW oth ends tapped: CQW oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R 1 3. 4 C1 1 H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. X. 1. Standard Stroke range C E H I K M N O Q Z to.. M3 X. 3. 1. 3.. epth 3. to 33 M4 X. 3 3. 3.. epth 3. to 3 3 M X. 4 4... epth. to 3 M X 1.. epth Note) imensions of model with rubber bumper are same as standard shown above. Refer to p..3-1 for rod end nut and mounting bracket. Standard SCQ size, # The diagram shows with an auto switch, which may be deleted if unnecessary..3-

Compact Cylinder/Standard: ouble cting ouble Rod SeriesCQW/CQW Foot/CQW size 1 3. 3 4 1 4... Foot Stroke range G H S T X Y Z X Y to to. 3... 4. 4... 1 1. 34 3. 33. 44 4 4. C to to. 1.. 4 4 4 3. 3. 4 4 4.... CQS CQ Flange/CQW M size 1. 3 4 3 4... 4 1. 1.. Flange Stroke range to to to to 4. 43 4 4. Refer to p..3-1 for rod end nut and mounting brackets. F 4. 4... FT.. FV 3 4 FX 4 4 4 FZ 4 1... 1 3. 3. 4. Foot dd foot bracket # to standard type SCQ size, #. Front flange dd front flange #3 to standard type SCQ size, #. The diagram shows with an auto switch, which may be deleted if unnecessary..3-31

Series CQW/CQW ø to ø With uto Switch Standard (Through-hole)/CQW oth ends tapped: CQW oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R 1.4 4 C1 1 H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. X. 1. uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. Standard Stroke range C E H K M N O Q S V to to to to 3.4 43 4 4.4 3 3 3 3 4 M3 X. M4 X. M X. M X 1. 3. 3. 4. 3 3. 3.... epth 3.. epth 3. epth epth.. 3. 41. 4 3. 1.. 4.. 3 Note 1) imensions of model with rubber bumper are same as standard shown above. Refer to p..3-1 for rod end nut and optional brackets. Standard SCQ size, #.3-

Compact Cylinder/Standard: ouble cting ouble Rod SeriesCQW/CQW Foot/CQW size 1 3. 3 4 1 4... Foot Stroke range G H S T X Y Z X Y to to. 3... 4. 4... 1 1. 34 3. 33. 44 4 4. C to to. 1.. 4 4 4 3. 3. 4 4 4.... CQS CQ Flange/CQW M size 1. 3 4 3 4... 4 1. 1.. Flange Stroke range to to to to 4. 43 4 4. Refer to p..3-1 for rod end nut and mounting brackets. F 4. 4... FT.. FV 3 4 FX 4 4 4 FZ 4 1... 1 3. 3. 4. Foot dd foot bracket # to standard type SCQ size, #. Front flange dd front flange #3 to standard type SCQ size, #. The diagram shows with an auto switch, which may be deleted if unnecessary..3-31

Series CQW/CQW ø to ø With uto Switch Standard (Through-hole)/CQW oth ends tapped: CQW oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R 1.4 4 C1 1 H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. X. 1. uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. Standard Stroke range C E H K M N O Q S V to to to to 3.4 43 4 4.4 3 3 3 3 4 M3 X. M4 X. M X. M X 1. 3. 3. 4. 3 3. 3.... epth 3.. epth 3. epth epth.. 3. 41. 4 3. 1.. 4.. 3 Note 1) imensions of model with rubber bumper are same as standard shown above. Refer to p..3-1 for rod end nut and optional brackets. Standard SCQ size, #.3-

Compact Cylinder/Standard: ouble cting ouble Rod Series CQW Foot/CQW 1.4 4 1 4... Foot Stroke range to.4 to to to.4 3 3 3... 1 4. 4... G.. 4 4 H 1 1 4 S.4 4 4 T 3. 3. X 34 3 4 Y. 33. 4 4 Z 44 4 X.. Y 4... C CQS CQ Flange/CQWF M 1.4 4 3 4... 4 1. 1.. Flange Stroke range to to to to 4.4 3.4 3 3 3 F 4. 4... FT.. Refer to p..3-1 for rod end nut and optional brackets. FV 3 4 FX 4 4 4 FZ 4 1... 1 3. 3. 4. Foot dd foot bracket # to standard SCQ size, #. Flange dd front flange #3 to standard SCQ size, #..3-33

Series CQW/CQW ø to ø With uto Switch For those without auto switches, refer to the dimension chart because their, and P dimensions will differ. Standard (Through-hole)/CQW, CQW oth ends tapped: CQW O1 thread R R oth ends tapped O1 R M X 1. M X 1. M X 1. ø1 -H thread effective depth C (Opposite side, too) 4-øN through -øo counter bore Q -P (Port size) Q width across flats K ead wire minimum bending radius uto switch -, K M E S Z M J E ø +stroke + stroke ø Rod end nut uto switch -, F -H1 C1 X 1 1+stroke Rod end nut C1 X 1+stroke Without auto switch With auto switch st. or less to to st. or less to to.+ 1. 1..+ stroke stroke + 1 + stroke stroke.+ 1. 1..+ stroke stroke 1. 1 1. 1. 1. uilt-in One-touch fitting/ø to ø V -P1 (Piping tube O..) C1.. H1 M X 1. M X 1. M1 X 1. 1.. 33. X 3. 3.. øz1 W1 uilt-in One-touch fitting uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. size Without auto switch With auto switch V 3 4 W1. V 3.. W1. Z1 P1 Standard st. or less 44.+ stroke 4+ stroke.+ stroke Without auto switch P to. 1. to. 4. st. or less.+ stroke + stroke.+ stroke to.. to 1. 1 1. st. M X. Rc(PT)1/ Rc(PT)1/4 to Rc(PT)1/ Rc(PT)1/ Rc(PT)1/4 st. or less 4.+ stroke 4+ stroke.+ stroke With auto switch P to to st. or less to to to st....+ stroke. 1. Rc(PT)1/ 4 + stroke 1 Rc(PT)1/ 1...+ stroke. 1. Rc(PT)1/4 C 1 E 4 4 H M X 1. M X 1. M X 1. I J 4. K 1 M 34 N O Q. epth.. epth. epth S. 31. 3 41 Z 1 Note) imensions of model with rubber bumper are same as standard as shown above. Refer to p..3-1 for rod end nut and optional brackets. Standard SCQ size, # The diagram shows with an auto switch, which may be deleted if unnecessary..3-34

Compact Cylinder/Standard: ouble cting ouble Rod Series CQW Foot/CQW, CQW Without auto switch With auto switch st. or less. + stroke + stroke. + stroke 1 to st. or less to to 1. 3. 1.. 1. 3. 3. 3. 43. to 1... + stroke + stroke. + stroke Foot Without auto switch With auto switch Stroke range S S st.or less to to st.or less to to st.or less to to st.or less to to st.or less to to st.or less to to 4. +. +. + 4. +. + 4. + to,, stroke. 14. stroke. 1. stroke. 4. stroke. 14. stroke. 1. stroke 4 + + 4 + 4 + + 34 + to,, stroke 1 stroke 1 stroke 4 stroke 1 stroke 1 stroke. +. + 1. +. +. +. + to,, stroke 1. 1. stroke. 1. stroke.. stroke 1. 1. stroke. 1. stroke.. 4. 4. G H T X Y Z X Y 1. 4 3. 1.. 1. 4 33 3. 4 4. 1 3 3.. Flange/CQWF, CQWF C CQS CQ M Flange Stroke range to,, to,, to,, Without auto switch With auto switch 1 1 st. st. or less or less Without auto switch With auto switch F FT FV FX FZ 1 M st.or less to to st.or less to to st.or less to to st.or less to to.. 4. 14 1... 1. 1 1... 4. 14 1... 1. 1 1.... 4 4 1 1 1 34 4. + stroke 4 + stroke. + stroke. + stroke + stroke. + stroke Refer to p..3-1 for rod end nut and optional brackets. Foot dd foot bracket # to standard type SCQ size, #. Flange dd front flange #3 to standard type SCQ size, #. 4. + stroke 4 + stroke. + stroke. + stroke + stroke. + stroke. + stroke + stroke. + stroke to 1.. 4 to. 1.. + stroke + stroke. + stroke to 1. 1. to. 1. 3 3. 3. 43. 4.. 33..3-3

Series CQW/CQW ø to ø Standard (Through-hole)/CQW, CQW With uto Switch oth ends tapped: CQW, CQW For those without auto switches, refer to the dimension chart because their and dimensions will differ. oth ends tapped O1 M X 1. M X 1. M X 1. R 1 Without auto switch With auto switch 1 1 st. or less to to st. or less to to + stroke + stroke. + stroke 14 3. 1 4. + stroke + stroke 1. + stroke 14 3. 1 4. C1 H1 1 X uilt-in One-touch fitting.. M1 X 1. M X 1. M X 1. 33. 43. 43.. 3. 3. uilt-in One-touch fitting Z1 P1 V W1. uilt-in One-touch fitting, ø, stroke: imensions are same as stroke cylinder tube. uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. Standard Stroke range to,, to,, to,, st. or less + stroke 1+ stroke 4.+ stroke Without auto switch to to st. to or less 3 1. 14.. 4+ stroke 1+ stroke.+ stroke to 1 1 1. st. to or less + stroke 1+ stroke 4.+ stroke C E H I J K M 1 1 M X 1. M X. M X. 3 1 1. 1 4 With auto switch to st. to to or less 3 1 1 1. 14.. 1. N + stroke 1+ stroke.+ stroke O P epth. Rc(PT)1/4 1. epth. Rc(PT)3/ 1. epth. Rc(PT)3/ Q 1. 1 S 3 1. 1. 4... W 1 Note 1) imensions of model with rubber bumper are same as standard shown above. Refer to p..3-1 for rod end nut and optional brackets..3-3

Compact Cylinder/Standard: ouble cting ouble Rod Series CQW Foot/CQW, CQW Without auto switch With auto switch 1 1 st st or less or less + Stroke 1+ Stroke.+ Stroke 1 to 43. to 3 + Stroke + Stroke 1.+ Stroke to 43. to 3. 43. 3. 3. Foot Without auto switch Stroke range S st to to st to to st to or less or less or less + 4+ + to,, Stroke 3 1 Stroke 1 Stroke 1 1+ 1+ 1+ to,, Stroke 1 1 Stroke 1 Stroke 4.+.+.+ to,, Stroke 1.. Stroke. 1. Stroke 1. mm G H T X Y Z X Y 1 4 3. 1. 1. 4. 1 1 1. 1 3. to 1. With auto switch S st to to st to to st to to or less or less or less + + + Stroke 3 1 Stroke 1 Stroke 1+ 1+ 31+ Stroke 1 1 Stroke 1 Stroke 1.+.+ 3.+ Stroke 1.. Stroke. 1. Stroke 1 1. 1. C CQS CQ M Flange/CQWF, CQWF Flange Stroke range to,, to,, to,, Without auto switch st to to st to or less or less + 4+ Stroke 1 Stroke 1+ 1+ Stroke Stroke 4.+.+ Stroke 1. 4. Stroke. to 1 1 1. Without auto switch With auto switch 1 1 st to to st to to or less or less + Stroke + Stroke 4 33 + Stroke 1+ Stroke 4 33 1.+.+ Stroke 4.. Stroke 4.. 3 43. 3. 3. With auto switch F FT FV FX FZ 1 M st to to st to to or less or less + + Stroke 1 Stroke 1 1 1+ 1+ Stroke Stroke 1 1 4 4.+.+ Stroke 1. 4. Stroke. 1. 4 4 33. 43. 43..3-3

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ ø, ø, ø, ø, ø, ø, ø How to Order Standard CQ S With auto switch CQ S 3 S F With auto switch (uilt-in magnet) Mounting Mounting racket Part No. size Through-hole (Standard) oth ends tapped Foot Foot () CQ- CQ- CQ- CQ- CQ- CQ- CQ- F G size mm mm mm mm mm mm mm Flange CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F Front flange Rear flange ouble clevis Mounting brackets are shipped not assembled with the cylinder. Piping Screw-in piping uilt-in One touch fitting (1) Note 1) uilt-in One-touch fitting: size ø to ø. ouble clevis (4) CQ- CQ- CQ- CQ- CQ- CQ- CQ- Note ) When ordering foot brackets, pcs. should be ordered for each cylinder. Note 3) The parts included with each mounting bracket are as follows. Foot, flange/ody mounting bolts ouble clevis/clevis pin, C shaped snap ring for axis, ody mounting bolt Note 4) Clevis pin and snap ring is included for double clevis. Style Reed switch Special function Electrical entry uto switch ction S Single acting spring return T Single acting spring extend Refer to standard stroke table on p..3-3. Indicator Wiring (Output) oad voltage C C Without auto switch (uilt-in magnet) Refer to table below on auto switch model no. ody option F M Number of auto switches S 1 n n Standard Rear boss mount Combination of body option is possible. (Ex.) FM pplicable uto Switches/Refer to p..3- for detail specifications on auto switches. Solid state switch iagnostic ( color) Yes Grommet No Yes Connector No iagnostic ( color) Grommet Yes Grommet Connector Grommet Water resistance ( color) With timer iagnostic output ( color) atch with diagnostic output ( color) Yes 3 wire (Equiv. to NPN) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 4 wire (NPN) V V V, V 4V V V, V V, V V V, V V V, V 4V V V, V V V, V V V V 4V Rail mounting ø to ø Perp. In-line 3 3C C W FNV FPV FV JC FNWV FWV H 3H H F FP J FW FPW JW F FNT FF FF ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switches marked with "O" are manufactured upon receipt of order. irect mouting ø to ø Perp. In-line H V 3V V FNV FPV FV FNWV FPWV FWV 3 FN FP F FNW FPW FW F ead wire (m). ( ) 3 () (Z) None (N) pplicable load Relay, PC Relay, PC.3-3

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Order Made Made to Order Refer to p..4-1 for common made to order specifications and p..4- for individual specifications. Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. Caution Snap Ring Installation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Model Pneumatic size Through-hole (Standard) Mounting oth ends tapped uilt-in magnet Piping Model Screw-in style With built-in One-touch fitting Rear boss mount Fluid Proof pressure Max. operating pressure mbient and fluid temperature Rubber bumper Rod end thread Tolerance of rod end thread Tolerance of stroke length Mounting Piston speed M X. M X. M X. M X. Note 1) Without auto switch: stroke type=m X. Note ) With built-in fitting: imensions of bore size ø stroke are same as stroke model. Specifications Standard Stroke size,,,, Minimum Operating Pressure size Standard stroke,, nit: MPa Single acting (Spring return, Spring extend)...1.1.1.1. llowable Kinetic Energy size Kinetic energy. (1) M X. Rc(PT) 1 / ø/4 () Pneumatic (Non-lube) ir Rc(PT) 1/ ø/4 Rc(PT) 1/4 ø/ 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) None Female thread JIS class +1.. Through-hole to mm/s CQ nit: mm Theoretical Force nit: N Operating pressure (MPa) M.3. Spring return Spring extend size ction.3 1 4 33 3 4 1 1 31 4 Refer to p..-3 for spring force...1..4.. 44 4 3 31 4 1 1.3. 3 33 41 4 4 4 3 nit: J. C CQS.3-3

Series CQ Weight ction Spring extend Spring return size 4 1 43 1 Cylinder stroke 1 3 1 1 1 3 3 4 1 3 3 nit: g 441 4 Option Weights size oth ends tapped Male thread Nut Rear boss mount One-touch fitting Foot Front flange (including bolt) Rear flange (including bolt) ouble clevis (including pin, snap ring, bolt) nit: g 1. 1. 4 3 1.3 3 4 4 3 3 1 1 1 3 1 1 3 1 1 1 1 Calculation example: CQ-SM Cylinder weight: CQ-S 1g Option weight: oth ends tapped g 43g ouble clevis g 3. 43 33 34 33 3g uto Switch Mounting racket Part No. size,,, Part No. Q-1 Q- Note Switch mounting screw (M3 X. X l) Square nut Switch mounting screw (M3 X. X l) Switch spacer Switch mounting nut pplicable switch Reed switch Solid state switch -, -3C, C -H, H -W -F, J -FV -JC -FW, JW -FWV -F -FF -FNT [Stainless steel mounting bolt set] The set of stainless steel mounting screws (with nuts) described below is available and can be used depending on the operating environment. (The spacers for auto switches must be ordered separately, as they are not included.) : For -//F/J The stainless steel bolts described above are used when the -F switch is shipped mounted on a cylinder. When the switches are shipped as individual parts, the set is included. Mounting olt for CQ Special long bolt for through-hole mounting is available as option. How to Order: Specify the required bolts Example) olt M3 X l 4 pcs. Spring return Model C Mounting bolt CQ-S M3 X l. -S X l CQ-S M3 X l -S X l CQ-S M X l. -S X l CQ-S M X l. -S 3 X 3 l CQ-S M X l -S 3 X 3 l CQ-S 3 M X 3 l. -S X l CQ-S 4 M X 4 l. -S X l Spring extend Model C Mounting bolt CQ-T M3 X l. -T X l CQ-T M3 X l -T X l CQ-T M X l. -T X l CQ-T M X l. -T 3 X 3 l CQ-T M X l -T 3 X 3 l CQ-T 3 M X 3 l. -T X l CQ-T 4 M X 4 l. -T X l.3-

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQW Construction Component Parts No. q w Piston e r t y u i o!!1!!3 escription Cylinder tube Piston rod Collar Snap ring ushing Return spring ronze element Snap ring Plug with fixed orifice Rod end nut Guide boss ring One-touch fitting Material luminum alloy luminum alloy Stainless steel Carbon steel luminum bearing alloy luminum alloy casting Carbon tool steel ead bronze casting Piano wire Sintered metal C Carbon tool steel lloy steel Carbon steel luminum alloy Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø, Chromated, coated Phosphate coating sed for only ø Zinc chromated In case of port size Rc(PT)1/, 1/4 In case of port size M X. Nickel plated ø to ø, nodized ø to ø Spring extend type (T type) piston and piston rod are combined. (Stainless steel) Copper Free CQ Copper free size Stroke S T (M) ø, ø, ø, ø, ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Component Parts No.!4!! Series escription Piston seal Rod seal Gasket Material NR NR NR Replacement Parts: Seal Kits size Kit No. Note Contents CQ-S-PS CQ-S-PS CQ-S-PS Kits include items!4, Pneumatic CQ-S-PS! and! from the CQ-S-PS table above. CQ-S-PS CQ-S-PS Seal kits consist of items!4,! and! contained in one kit, and can be ordered using the order number for each respective tube bore size. Specifications ction Cylinder bore size Proof pressure Max. operating pressure Rubber bumper Piping Piston speed Mounting uto switch Single acting single rod ø, ø, ø, ø, ø, ø, ø, 1.MPa 1.MPa None Screw-in piping to mm/s Through-hole Mountable C CQS CQ M.3-41

Series CQ uto Switch Specifications Weight ction Spring return Spring extend size Construction Spring return nit: g Cylinder stroke 1 4 4 4 3 3 1 4 3 3 3 1 1 3 1 Minimum Strokes for uto Switch Mounting Number of auto switches 1 -FV -JC -FV - - -3C -C -V -FWV -FWV 1 Option Weights size oth ends tapped Rod end Male thread male thread Nut -H -H -F -J -F -FP -FW 1 1 1 1. 1 1 3 Rear boss mount One-touch fitting Foot (including bolt) Front flange (including bolt) Rear flange (including bolt) ouble clevis (including pin, snap ring, bolt). 4 4 1.3 3 Calculation example) CQ-SM Cylinder weight: CQ-S g Option weight: oth ends tapped g 43g ouble clevis g Spring extend 4g -W 1 3 4 1 4 3 3 4 1 -FW -JW -F -FF -F 1 3 1 1 1 1 1 - -FN nit: g 3. 43 33 34 33 If auto switches are to be installed, the weight that corresponds to the number of auto switches and mounting brackets to be used must be added. Weight/uto Switch Mounting racket Part No. pplicable bore size Weight g Q-1 Q- ø to ø ø to ø 1. 1. Refer to p..3- for auto switch weight. Port size M X. Component Parts No. q w e r t y u i o!!1 escription Cylinder tube Piston Piston rod Collar Snap ring ushing Return spring ronze element Snap ring Plug with fixed orifice Magnet Material luminum alloy luminum alloy Stainless steel Carbon steel luminum bearing alloy luminum alloy casting Carbon tool steel ead bronze casting Piano wire Sintered metal C Carbon tool steel ead bronze casting Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø, Chromated, coated Phosphate coating sed for only ø Zinc chromated In case of port size Rc(PT)1/, 1/4 In case of port size M X. Piston and piston rod of spring extend type (T type) bore size ø or larger are combined. (Stainless steel).3-4 No.!!3!4 Replacement Parts: Seal Kits Series escription Piston seal Rod seal Gasket Mat'l NR NR NR Note size Kit No. Contents CQPS CQPS CQPS Kits include items!, Pneumatic CQPS!3 and!4 from the CQPS table above. CQPS CQPS Seal kit consist of item!,!3 and!4 contained in one kit, and can be ordered using the order number for each respective tube bore size.

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Mounting olt for CQ with uto Switch Spring return Special long bolt for through hole mounting is available as option. How to Order: Specify the required bolts. Example) olt M3 X 3 l pcs. Spring return Spring extend Model C Mounting bolt CQ-S 3 M3 X 3 l. -S X l CQ-S M3 X l -S 4 X 4 l CQ-S M X l. -S 4 X 4 l CQ-S M X l. -S 4 X 4 l CQ-S M X l -S 4 X 4 l CQ-S 4 M X 4 l. -S X l CQ-S M X l. -S X l Spring extend Model C Mounting bolt CQ-T M3 X l.1 -T 4 X 4 l CQ-T M3 X l -T 4 X 4 l CQ-T M X l. -T 4 X 4 l CQ-T M X l. -T 4 X 4 l CQ-T M X l -T 4 X 4 l CQ-T 4 M X 4 l. -T X l CQ-T M X l. -T X l uto Switch Mounting Position (at Stroke End) and Mounting Height ø to ø - - -H -H -F -J -FW -JW -FF -FNT -F -3C -C -JC -W -FWV -FV ø to ø C CQS CQ M ø to ø - -F -V -FV -FWV -FW -F uto Switch Mounting Position - - -H -H -3C -C -F -J -FV -JC -W -F -FW -FF -JW -FWV - -V -F -FV -FW -FWV -F 4.. 3 1. () (.) (.) (4.) uto Switch Mounting Height -H -H -F - -J -3C -FV -FW -JC - -JW -C -FWV -F -FF -FNT.. 3 -W -V -FV -FW -FWV -F. (.) () (). (.) (3). (4.) (). (.). 3............... 4 4. 3.. 1. 1....... 1.. 4.. 31. 3 41... 3 4 31. 34. 3. 4 4 31 3 3. 44. 31 34 3 41. 4. 34 3. 43.. 3.. 3.. 3.3-43

Series CQ ø to ø Spring Return Without uto Switch Standard (Through-hole): CQ oth ends tapped: CQ oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R Rear boss mount Rear boss mount G 1. 1. 1 1 Th.43..43.43 C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. Standard st.. st. 34 3. st 3. 4.. st... Refer to p..3-1 for rod end nut and optional brackets. C E 3 F... H M3 X. M4 X. M X. M X 1. I 3 4 K 3. 3. 4. M 1.. N 3. 3... O. epth 3.. epth 3. epth epth Z Standard SCQ size, #.3-44

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Foot/CQ Foot st.3 41. 4. 4. st 4.3 4. 1. 4. st 3. 4.. st...... 1 1 4... G H 4. 4..... 4 4 1 1 4 S st... st 1. 1. 1. T 3. 3. X 34 3 4 Y. 33. 4 4 Z 44 4 X.. Y 4... Front flange/cqf Front flange st 3. 3 3 4. st. 4 44 4. st 3. 4.. st... F 4. 4... FT.. FV 3 4 FX 4 4 4 FZ 4... 1 1 4... C CQS CQ Rear flange/cqg Rear flange st 31. 3. st 3 3. 4 4. 3. 3. 4. 1 1. 1.. imensions are same as rod side flange except, and 1. M ouble clevis/cq ouble clevis st 4. 4. st. 3 1. st 3. 4.. st... C st 3. 4 4. C st 44. 4. CT C CW CX CZ 4 4 1 1 Refer to p..3-1 for rod end nut and option brackets. Clevis pin and snap ring are contained.. 3. 3. 4. 1 1. 1.. N M4 X. M4 X. M X 1. M X 1. RR Foot dd foot (#) to SCQ size #. Front flange dd front flange (#3) to SCQ size #. Rear flange dd rear flange (#4) to SCQ size #. ouble clevis dd double clevis (#) to SCQ size #..3-4

Series CQ ø to ø Spring Return With uto Switch oth ends tapped: CQ Standard (Through-hole)/CQ oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R Rear boss mount Rear boss mount G 1. 1. 1 1 Th.43..43.43 uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. Standard st 3. 3 41 4. st 41. 44 4 4. st 33 3. 3. 3. st 3. 41. 4. C E 3 4 F.... H M3 X. M4 X. M X. M X 1. K 3. 3. 4. M 3 N 3. 3... O. epth 3.. epth 3. epth epth S 3. 41. 4 3. 1.. 4.. V 3 Refer to p..3-1 for rod end nut and optional bracket Standard SCQ size, #.3-4

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Foot st 1.3 3... st.3.. 4. st 33 3. 3. 3. st 3. 41. 4.... 1 1 4... G H 4. 4..... 4 4 1 1 4 st 1 S st 3.. 4.... T X Y Z 3. 3. 34 3 4. 33. 4 4 44 4 X.. Y 4... Front flange st 4. 4 1. st 1. 4. st 33 3. 3. 3. st 3. 41. 4. F 4. 4... FT.. FV 3 4 FX 4 4 4 FZ 4... 1 1 4... Rear flange st 4.4 44. 4. st 1.4 4. 4. 3. 3. 4. 1 1. 1.. imensions except, and 1 are same as rod flange type. C CQS CQ M ouble clevis st.. st 1. 3. st 33 3. 3. 3. st 3. 41. 4. C st. 4. C st. 4. CT C CW CX CZ 4 4 Refer to p..3-1 for rod end nut and option bracket. Clevis pin and snap ring are contained. 1 1. 3. 3. 4. 1 1. 1.. N M4 X. M4 X. M X 1. M X 1. RR Foot dd foot bracket # to SCQ bore size, #. Front flange dd front flange #3 to SCQ bore size, #. Rear flange dd rear flange #4 to SCQ bore size, #. ouble clevis dd double clevis # to SCQ bore size, #..3-4

Series CQ/CQ ø to ø Spring Return With uto Switch Refer to dimensions table since dimensions of,, F and P are different when auto switch is not mounted. oth ends tapped: CQ Standard (Through-hole)/CQ, CQ oth ends tapped mm O1 M X 1. M X 1. M X 1. R Rear boss mount Rear boss mount Th.. 3. uto switch shown above is -3 and -. Refer to p..3- for auto switch mounting position and mounting height. C1.. X 3. 3.. H1 M X 1. M X 1. M1 X 1. 1.. 33. With built-in One-touch fitting/ø to ø V øz1 P1 (Piping tube O..) With built-in One-touch fitting Z1 P1 V 3.. W1. W1 Standard Without auto switch With auto switch F P st st st st st st 3 41. 4. 34. 33 3... M X. RC(PT)1/ RC(PT)1/ 4 1.. 3 44. 43 4. 4...... RC(PT)1/4.... F.. P RC(PT)1/ RC(PT)1/ RC(PT)1/4 C E H I J K M 1 4 4 M X 1. M X 1. M X 1. 4. 1 34 N... O epth epth epth S. 31. 3 41 Z 1 Refer to p..3-1 for rod end nut and option bracket. Standard SCQ size, #.3-4

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Foot Without auto switch With auto switch S S st st st st st st.. 33 1.. 3 43.. 34. 3. 1. 3.. 3. 44. 4.. 33..... 1....... 3. 1 G H X Y Z X Y 1 3.. 4 1.. 1 3.. 4 33 4 4. 1 43. 3. Front flange Without auto switch With auto switch st st st st 4 1.. 33 34. 3. 1.. 3 43 44. 4......... F FT FV FX FZ 1 M... 4 1 3. 34 4 1 3. 1 43. Rear flange size W/o auto switch W/ auto switch 1 st st 43 4 4. 4... 3. 4..... 33. imensions except, and 1 are same as rear flange type. C CQS CQ M ouble clevis Without auto switch With auto switch C C st st st st st st 3.. 33 3. 3... 3.. 3 43 44. 4. 3......... 1...... C CT C CW CX CZ 1 N RR 1 3 1 3. M X 1.. M X 1. 44 33. M X 1. Refer to p..3-1 for details of rod end nut and optional bracket. Clevis pin and snap ring are attached. Foot dd foot bracket (#) to SCQ size, #. Front flange dd front flange (#3) to SCQ size, #. Rear flange dd rear flange (#4) to SCQ size, #. ouble clevis dd double clevis (#) to SCQ size, #..3-4

Series CQ/CQ ø to ø Spring Extend Without uto Switch Standard (Through-hole)/CQ oth ends tapped: CQ oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R Rear boss mount Rear boss mount G 1. 1. 1 1 Th.43..43.43 Note 1) Front boss mount is optional specification. (Specify -XC3 at the end of model number.) C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. st 1. 3.. 1 st 4... Standard st. 34 3. st. 4 44 4. st 3. 4.. st... C E 3 Refer to p..3-1 for details of rod end nut and optional bracket. H M3 X. M4 X. M X. M X 1. I 3 4 K st... st... 1 M 1.. N 3. 3... O. epth 3.. epth 3. epth epth Q. Z Standard SCQ size, #.3-

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Foot/CQ Foot 1 S G H T X Y Z X Y st st st st st st st st st st 4.3.3 1. 3. 34 4.. 1 1 34. 44 4. 4.. 3.. 1. 3.. 3. 4.. 1.. 3 33. 4 1. 1. 4.. 1. 4. 33. 3.. 4 4. 1. 3. 4 4.. 4. 4... 3. 4.. 4. 1. 3. 4.. Rod end nut Front flange/cqf Front flange st st st st.. 4 3.. 44 4 4.. 4.... 1 F FT FV FX FZ st st st st 4.. 4 1. 3. 34 4... 3 4 4 1. 3.. 3. 1. 4. 33. 3.. 4 4 3. 4. Rod end nut C CQS CQ Rear flange/cqg Rear flange st 3 3. 4 st 4 4. 4.. st... st. st 1 1 st 4.... 3.. 1.. imensions except, and 1 are same as front flange. M Rod end nut ouble clevis/cq ouble clevis st st st st.. 3 3.. 1 1 4...... C C CT C CW CX CZ st st 44. 4 4... 4 4 1 1. st... 1 N st st st. 1 4 M4 X.... M4 X.. 3.. M X 1. 1.. M X 1. Refer to page p..3-1 for details of rod end nut and optional brackets. Clevis pin and snap ring are attached. RR Rod end nut Foot dd foot bracket (#) to SCQ size, #. Front flange dd front flange (#3) to SCQ size, #. Rear flange dd rear flange (#4) to SCQ size, #. ouble clevis dd double clevis (#) to SCQ size, #..3-1

Series CQ ø to ø Spring Extend With uto Switch oth ends tapped: CQ Standard(Through-hole)/CQ oth ends tapped O1 M4 X. M4 X. M X 1. M X 1. R Rear boss mount Rear boss mount G 1. 1. 1 1 Th.43..43.43 Note 1) Rod side end boss type is optional specification. (Specify "-XC3" at the end of model number.) C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. st 1. 3.. 1 st 4... bove auto switch: -3 and. Refer to p..3- for auto switch mounting position and mounting height. Standard type st 4. 44 4 4. st. 4. st 3.4 3. 3. 3. st 4.4. 41. 4. C E 3 4 CQ dd auto switch (#) to SCQ, # CQ dd auto switch (#) to SCQ, # CQ dd auto switch (#) to SCQ, # CQ dd auto switch (#) to SCQ, # H M3 X. M4 X. M X. M X 1. K st... st... 1 M 3 N 3. 3... O. epth 3.. epth 3. epth epth Q. S 3. 41. 4 3. 1.. 4.. V 3 Refer to p..3-1 for details of rod end nut and optional brackets..3-

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Foot/CQ Foot 1 S G H T X Y st st st st st st st st st st.. 3.4 4.4 1. 3. 34 4.. 1 1 34... 3.. 1. 3.. 3. 4.. 1 3.. 3 33.. 3. 3. 41. 1. 4. 33. 3.. 4 4 4.. 3. 4 4 4. 4. 3. 4. 3. 4.. 4.. 3. 4 Z 44 4 X.. Y 4... Front flange/cqf Front flange st. 4. st. 4. st 3.4 3. 3. 3. st 4.4. 41. 4. F 4. 4... FT.. FV 3 4 FX 4 4 4 FZ 4 st 1. 1. 1. st 3. 3. 4. st. 33. 3. 1 st 34 3. 3. 4. C CQS CQ Rear flange/cqg Rear flange st 1.4 4. 4. st 1.4. 4. st... st... 1 st 1. 3.. 1 st 4... imensions except, and 1 are same as rear flange type. M ouble clevis/cq ouble clevis st. 3. st 1. 3.. st. 3. 1 st 4... st 3.4 3. 3. 3. st 4.4. 41. 4. N M4 X. M4 X. M X 1. M X 1. C RR st. 4. C st. 4. CT C CW CX CZ 4 4 1 1. st st...... 1 Refer to p..3-1 for details of rod end nut and optional brackets. Clevis pin and snap ring are attached. asic style CQ SCQ, # CQ SCQ, # CQ SCQ, # CQ SCQ, # Mounting style dd foot bracket (#) dd front flange (#3) dd rear flange (#4) dd double clevis (#) dd with auto switch (#).3-3

Series CQ/CQ ø to ø Spring Extend Standard (Through-hole)/CQ, CQ With uto Switch oth ends tapped: CQ/CQ Refer to dimensions table since,, P and Q varies in case of without auto switch. oth ends tapped O1 M X 1. M X 1. M X 1. R Rear boss mount Rear boss mount 1 3 Th... Note 1) Front boss mount is optional specification. (Specify "-XC3" at the end of model number.) C1.. X 3. 3.. H1 M X 1. M X 1. M1 X 1. st 33. 33. 1 st 3. 3. 43. st 3. uilt-in One-touch fitting/ø to ø bove auto switch: -3/ Refer to p..3- for auto switch setting position and mounting height. Standard st 4.... Without auto switch With auto switch P Q st st st st st RC(PT) 33 M X. 1/.. 3 43 34. 3. RC(PT)1/.. 44. 4... RC(PT)1/4...... P RC(PT)1/ RC(PT)1/ RC(PT)1/4 Q.. uilt-in One-touch fitting Z1 P1 V 3.. W1. C E H I J K st M N O S Z 1 4 4 M X 1. M X 1. M X 1. 4. 1 1 1 1 34. epth. epth. epth. 31. 3 41 1 Refer to p..3-1 for details of rod end nut and optional brackets..3-4 Standard SCQ size, #

Compact Cylinder/Standard: Single cting Spring Return/Extend Series CQ Foot/CQ, CQ Foot Without auto switch With auto switch S S st st st st st st.. 33 1.. 3 43. 3. 34. 3. 1. 3. 3. 3. 44. 4.. 33..... 1....... 3. 1 st st 43. 4. 43. 4. 3 3.. G H.. 4 4 33 3 X 4 Y Z X Y 1.. 4.. Front flange/cqf, CQF Front flange Without auto switch With auto switch F FT FV FX FZ st st st st.... 34. 33 3....... 3 44. 43 4...... 4 4 1 st st 43. 4. 43. 4. 3 3.. M 34 C CQS CQ Rear flange/cqg, CQG Rear flange W/o auto switch With auto switch 1 st st st st 4 4. 4... 4. 4... 1 1 1 33. 33. 3. 3. 43. 3. imensions except, and 1 are same as front flange. M ouble clevis/cq, CQ ouble clevis st.. Without auto switch With auto switch C C.. st 33 34. 3.. C CT C CW CX CZ st 1 3 1 1 3 1 44 1 st st st 3 43 st.... 44. 4...... 1. 1.... 1. Refer to p..3- for details of rod end nut and optional brackets. Clevis pin and snap ring are attached. Foot dd foot bracket (#) to SCQ size, #. Front flange dd front flange (#3) to SCQ size, #. Rear flange dd rear flange (#4) to SCQ size, #. ouble clevis dd double clevis (#) to SCQ size, #..3-

Compact Cylinder Non-rotating Rod: ouble cting Single Rod Series CQK ø, ø, ø, ø, ø, ø, ø, ø How to Order Standard CQK With auto switch CQK 3 S (1) F With auto switch (uilt-in magnet) Non-rotating rod Mounting racket Part Number F G mm mm mm mm Foot (3) Flange ouble clevis () CQ- CQ- CQ- Mounting Through-hole (Standard) ø to ø oth ends tapped Foot ø, ø Front flange ø Rear flange ouble clevis Mounting brackets are shipped not assembled with the cylinder. size mm mm mm mm Note 1) When ø with switch is required, the body option should be with rubber bumper (C). Ex.)CQK-C Screw-in piping With built-in One-touch fitting () Note ) size with built-in One-touch fitting is from ø to. CQ-F CQ-F CQ-F Piping CQ- CQ- CQ- Note 3) When ordering foot brackets, pcs. should be ordered for each cylinder. Note 4) The attached parts for each brackets are as follows. Foot, Flange: ody mounting bolt ouble clevis: Clevis pin, C shape snap ring for axis, ody mountign bolt Note ) clevis pin and snap ring are packed with the double clevis. Style Special function Reed switch Electrical entry Indicator ction ouble acting Refer to Standard Stroke Table on p..3-. Wiring (Output) oad voltage C C Without auto switch (uilt-in magnet) Refer to below table for selection of auto switch. S n 1 n ody option Standard (Rod end female thread) F Rear boss mount With rubber bumper C (only ø with switch) M ody combination is possible. FM pplicable uto Switches/Refer to p..3- for further information on auto switch. Solid state switch No Yes Connector No iagnostic ( color) Grommet Yes iagnostic ( color) Yes Grommet Grommet Connector Yes Cylinder stroke 3 wire (Equiv. NPN) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) V V V 4V Rail mounting ø to ø irect mounting ø to ø Perp. In-line H Perp. V In-line 3 H 3H 3V 3 H V 3C C W FNV FPV FV JC FNWV F FP J FW FNV FPV FV FNWV 3 wire V, V FPW (PNP) FPWV Grommet V FWV JW FWV Water resistant wire ( color) F With timer 3 wire (NPN) FNT iagnostic output V, V ( color) FF 4 wire atch with diagnostic (NPN) FF output ( color) ead wire length.m (Example) C m Z (Example) CZ V V V, V 4V V V, V V, V V V, V V V, V 4V V uto switch 3m (Example)C None N (Example) CN Solid state switches marked with a " " are manufactured upon receipt of order. FN FP F FNW FPW FW F ead wire (m). () Number of auto switches 3 () (Z) None (N) pplicable load Relay, PC Relay, PC.3-

Compact Cylinder/Non-rotating Rod: ouble cting Single Rod Series CQK Pneumatic size Through-hole (Standard) Mounting oth ends tapped uilt-in magnet Piping Screw-in style With built-in One-touch fitting Rear boss mount M X. M X. M X. M X. (1) M X. Rc(PT)1/ ø/4 () Rc(PT) 1/ ø/4 Rc(PT) 1/4 ø/ Note 1) When requring style without auto switch, only stroke uses M X.. Note ) When requring style with built-in fitting, dimensions of ø and stroke are same as stroke. Rc(PT) 1/4 ø/ Order Made Made to Order Refer to p..4-1 for common made to order common specifications and p..4- for individual specifications. Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. Caution Snap Ring Installation Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Mounting q When removing a load, be sure to secure the flats of the piston rod on the load side. w If this is done without securing the piston rod on the load side, be aware that the coupled (screwed-in) portion of the piston rod could become loosened. e sing a non-rotating rod cylinder void using the air cylinder in such a way that rotational torque would be applied to the piston rod. If rotational torque is applied, the non-rotating guide will deform, causing a loss of non-rotating accuracy. se the chart below as a guide for the allowable rotational torque ranges. llowable torque kgf cm or less.4 1... 4. 4. 4. 4. Operate the cylinder in such a way that the load to the piston rod is always applied in the axial direction. Standard Specifications Style Fluid Proof pressure Max. operating pressure Minimum Operating Pressure nit: MPa Standard Stoke nit: mm size Min. operating press........ Non-rotating ccuracy size Non-rotating accuracy ± ±1 ±. Theoretical Force size mbient and fluid temperature Rubber bumper Rod end thread Rod end tolerance Stroke length tolerance Mounting Piston speed llowable Kinetic Energy size llowable kinetic energy..3. Operating Operating pressure (MPa) direction IN OT IN OT IN OT IN OT.3 34 4 1 4 1. 4 1 1 1 4. 1 4 344 Pneumatic (Non-lube) ir 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C(No freezing) None Female thread JIS class +1.. Through-hole to mm/s..1 size,,,, size..4. 1.3 Standard stoke,, 1,,,,, 1,,,, 3,, 4,,, 1,,,, 3,, 4,,,, 1,,,, 3,, 4,,, Refer to p..3-3 for intermediate strokes. nit: J. nit: N Operating Operating pressure (MPa) direction.3.. IN 4 OT 41 IN 31 3 OT 3 IN 4 OT 1 IN 41 1 OT 3 1 1.3- C CQS CQ M

Series CQK Weight nit: g Option Weights nit: g size 3 3 1 1 3 3 31 Construction 1 4 1 43 1 41 Cylinder stroke 3 4 1 4 3 1 1 1 1 1 1 4 3 3 3 343 3 4 3 33 3 3 4 4 3 4 1 44 33 4 3 43 44 4 1 size oth ends tapped Rod end male Male thread thread Nut Rear boss mount One-touch fitting Foot (including bolt) Front flange (including bolt) Rear flange (including bolt) ouble clevis (pin, snap ring, bolt) 1. 1. 3 1.3 4 3 1 1 1 1 3 1 4 3 34 33 Calculation example: CQK- asic weight: CQK- dditional weight: oth ends tapped ouble clevis asic (ø to ø) asic (ø to ø) 1 3 1 3 34 4 4g g 44g 1g g Rear boss mount With One-touch fitting Component Parts No. escription q Cylinder tube w Piston e Piston rod r Rod cover t y u i o!!1!.3- Collar Snap ring ushing Hex. socket head cap screw Hex. soket set screw Rod end nut End boss ring One-touch fitting Material luminum alloy luminum alloy Stainless steel Carbon steel rass luminum alloy luminum alloy Carbon tool steel Oil impregnated sintered alloy lloy steel lloy steel Carbon tool steel luminum alloy Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø, Nickel plated ø to ø, nodized ø to ø, nodized Phosphate coating ø to ø ø to ø, Nickel plated ø to ø, Nickel plated Nickel plated ø to ø, Hard anodized ø to ø No.!3!4! escription Piston seal Rod seal Tube gasket size Kit No. CQK-PS CQK-PS CQK-PS CQK-PS Note Material NR NR NR Replacement Parts: Seal Kits set of above nos.!3,!4 and!. size Kit No. Note CQK-PS CQK-PS CQK-PS CQK-PS Note set of above nos.!3,!4 and!.

Compact Cylinder/Non-rotating Rod: ouble cting Single Rod Series CQK Mounting olt for CQK Special bolt for through-hole mounting of CQK is available as option. How to Order: Specify the required bolts. Example) olt M3 X l pcs. Rear mounting Front mounting Model C Mounting bolt C' ' Mounting bolt CQK- - 3 M3 X l X 3 l 3 M3 X l X 3 l -1. X l. X l - 4 X 4 l 4 X 4 l - - CQK- - 3 X l X l M3 X l X 3 l 3 X l X l M3 X l X 3 l -1 X l X l - 4 X 4 l 4 X 4 l - - CQK- - -1-3 4 X l X l M X 3 l X l X 4 l X l 3 4 X l X l M X 3 l X l X 4 l X l - X l X l. - X l X l -3 - -4 - CQK- - -1-4 X l X l X l X l M X l X 4 l X l X l 3 4 X l X l X l X l M X 3 l X l X 4 l X l - X l X l. - X l X l -3 - -4 - CQK- - -1 - - 4 X l X l X l X l M X l X 4 l X l X l X l 4 X l X l X l X l M X l X 4 l X l X l X l - X l X l. -3 X l X l - -4 - - - X l X l X l X l X l X l X l X l X l X l Copper Free Model C Mounting bolt C' ' Mounting bolt CQK- - -1 - - 3 4 M X 3 l X l X 4 l X l X l 3 4 M X 3 l X l X 4 l X l X l - X l X l.. -3 X l X l - -4 - - - CQK- -1 - - - 1 4 X l X l X l X l X 1 l M X 4 l X l X l X l X l 1 4 X l X l X l X l X 1 l M X 4 l X l X l X l X l -3 X l X l.. - X l X l -4 - - - CQK- -1 - - - -3 - -4 - - -. 1 X l X l X l X l M X l X l X l X l X l X l X l X l X l X l X 1 l. 1 X l X l X l X l M X l X l X l X l X l X l X l X l X l X l X 1 l C CQS CQ M CQK size Stroke (M) Copper Free Series ø, ø, ø, ø, ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Specifications ction Cylinder bore size Proof pressure Max. operating pressure Rubber bumper Piping Piston speed Mounting uto switch ouble acting single rod ø, ø, ø, ø, ø, ø, ø 1.MPa 1.MPa None Screw-in piping to mm/s Through-hole Mountable.3-

Series CQK uto Switch Specifications Refer to p..3- for details of auto switch. Minimum Strokes for uto Switch Mounting Number of auto switches 1 -FV -JC -FV - - -3C -C -V -FWV -FWV 1 -H -H -F -J -F -FP -FW 1 1 -W 1 -FW -JW -F -FF -F -FF - -FN Weight 1 3 3 3 4 1 14 44 4 1 1 1 1 3 3 Cylinder stroke 1 14 4 3 33 34 3 3 3 4 3 3 31 4 4 4 4 3 43 3 4 4 4 4 nit: g 4 Option Weights size oth ends tapped Rod end Male thread male thread Nut Rear boss mount With One-touch fitting Foot (including mounting bolt) Front flange (including mounting bolt) Rear flange (including mounting bolt) ouble clevis (including pin, snap ring and bolt) 1. 1. 3 1.3 4 3 1 1 1 1 3 1 4 3 34 33 nit g 1 3 1 3 34 4 Construction ø to ø ø Calculation example: CQK-M asic weight: CQK- 34g dditional weight: oth ends tapped g 44g ouble clevis 1g 1g When auto switch is mounted, add the weight of number of auto switches and mounting brackets. Weight/uto Switch Mounting racket Part No. Q-1 Q- size ø to ø ø to ø Weight g 1. 1. Refer to p..3- for auto switch weight. ø to ø Component Parts No. q w e r t y u i o!!1!!3!4 escription Cylinder tube Piston.3- Piston rod Rod cover Collar Snap ring ushing olt with hex. hole olt with hex. hole Set screw with hex. hole Magnet Piston seal Rod seal Tube gasket Material lluminum alloy lluminum alloy Stainless steel Carbon steel rass lluminum alloy lluminum alloy Carbon tool steel Oil impregnated sintered alloy lloy steel lloy steel lloy steel NR NR NR Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø, Nickel plated ø to ø, nodized ø to ø, nodized Phosphate coating ø to ø ø to ø, Nickel plated ø, Nickel plated Nickel plated, ø to ø Replacement Parts: Pneumatic (Non-lube) size Kit No. CQK-PS CQK-PS CQK-PS CQK-PS CQK-PS CQK-PS CQK-PS CQK-PS Contents Kits include items!,!3 and!4 from the left table. Seal kits consist of items!,!3 and!4 contained in one kit, and can be ordered using the order number for each tube bore size.

Compact Cylinder/Non-rotating Rod: ouble cting Single Rod Series CQK Mounting olt for CQK with uto Switch Special long bolt for through-hole mounting of CQK is available. How to Order: Specify the required bolts Example) olt M3 X 3 l pcs. Rear mounting Front mounting Model CQK-C -C -1C -C -C -C CQK- - -1 - - - CQK- - -1 - - - -3 - -4 - CQK- - -1 - - - -3 - -4 - CQK- - -1 - - - -3 C.... 3 4 4 4 4 Mounting bolt M3 X 3 l X l X 4 l X l X l X l M3 X l X 4 l X l X l X l X l M X l X 4 l X l X l X l X l X l X l X l X l M X l X 4 l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l C'... ' 4 4 4 4 Mounting bolt M3 X l X 4 l X l X l X l X l M3 X 4 l X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l Model CQK- -4 - - - CQK- - -1 - - - -3 - -4 - - - CQK- -1 - - - -3 - -4 - - - CQK- -1 - - - -3 - -4 - - - C.... 4 1 1 Mounting bolt M X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l X l X 1 l C'... ' 4 1 1 Mounting bolt M X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l X l X 1 l C CQS CQ M uto Switch Mounting racket Part No. size (m) / / / / Part No. Q-1 Q- Note Switch mounting (M3 X. X l) Square nut Switch mounting (M3 X. X l) Switch spacer Switch mounting nut pplicable switch Reed switch Solid state switch -, -3C, C -H, H -W -F, J -FV -JC -FW, JW -FWV -F -FF -FNT [Mounting screw set made by stainless steel] Following stainless steel mounting screw set (included nut) is provided. se them in accordance with environment. (uto switch interface is not included. Order it separately) : For -//F/J When -F mounted on cylinder is required, the stainless steel screw mentioned above is used at shipping. When auto switch unit is shipped, 4 is attached..3-1

uto Switch Mounting Position - -.. 1. 1. 1...... -H/H -3C/C -F/-J/FV -JC 1...... 1 -W 1... 3. 4 4. 3. -F -FW -FF -JW -FWV 1. 1. 1. 1... 1 1.... 1... 1. 1 1.... uto Switch Mounting Height - - 1.. 4.. 31. 3 41 4. -H/H/F -J/FW/JW -F/FF/FNT. 3.... 3 4 4. -3C -C.. 31. 34. 3. 4 4 4. -FV -FWV 3 31 3 3. 44. 1 -JC 31 34 3 41. 4. 4 -W 34 3. 43. - -V -F -FV -FW -FWV -F. 3. -FV -FWV -FW -F. 3. 4. 3 3. -V - - - -F -FW -F -3C -C -JC -V -FV -FWV -W -FWV -FV -H -FW -H -JW -F -FF -J -FNT -F ø to ø ø to ø ø to ø uto Switch Mounting Position (at Stroke End) and Mounting Height.3- Series CQK

Series CQK ø to ø Standard (Through-hole)/CQK Without uto Switch ø, ø ø, ø Rear boss mount Rear boss mount G 1. 1. 1 1 Th.43..43.43 C1 1 H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. X. 1. Standard Stroke range to to to to. 3. 3... C E 3 F... G 1. 1. H M3 X. M4 X. M X. M X 1. I 3 4 K M N Q Th. 3. 3. 4. 1.. 3. 3.... 1 1 1.43..43 1.43 Refer to p..3-1 for details of rod end nut and optional bracket. Standard SCQ size, #.3-4

Compact Cylinder/Non-rotating Rod: ouble cting Single Rod Series CQK ø to ø With uto Switch Standard (Through-hole)/CQK ø, ø ø, ø Piston rod cross section Rear boss mount C CQS CQ M Standard bove auto switch: -3/. Refer to p..3- for of auto switch mounting position and mounting height. Stroke range to to to to 3. 3 44 4. 33 3. 3.. C E 3 4 F.... G 1. 1. H M3 X. M4 X. M X. M X 1. K. M N Q S Th 3. 3. 3. 1.43 1. 3. 3. 1 41... 4. 3. 1. 4 1.43 4. 3. 1 3. 1.43. Refer to p..3-1 for rod end nut and optional bracket. V C1 1 H1 M X. M X 1. M X 1. M X 1. 1 X. 1. 1.. 1. Standard SCQ size, # (#+#).3-

Series CQK ø Without uto Switch Piston rod cross section Note 1) ( ): at stroke mm Stroke range to, 3 4 4 Rear boss mount With built-in One-touch Fitting/ø.3- Standard CQK SCQ, # rawing is with auto switch. When auto switch is not required, delete it. When with built-in auto switch is required, dimensions of stroke are same as stroke. Refer to p..3-1 for details of rod end nut and optional bracket.

Compact Cylinder/Non-rotating Rod: ouble cting Single Rod Series CQK ø With uto Switch Piston rod cross section Rear boss mount C CQS CQ M With built-in One-touch fitting/ø 3. -ø (Piping tube O..) ø Standard SCQ, # (#+#) Refer to p..3-1 for details of rod end nut and optional bracket..3-

Series CQK/CQK ø to ø With uto Switch (For those without auto switches, refer to dimensions table because dimensions of and vary.) Standard (Through-hole)/CQK oth ends tapped: CQK O1 thread R R oth ends tapped O1 M X 1. M X 1. M X 1. R 1 øi H thread effective depth C 4-øN through -øo counter bore Q -P (Connection port) F (ø) (K) Z M E øth K Piston rod cross section ead wire minimum bending radius uto switch -/ M E S J +Stroke +Stroke Rear boss mout uto switch -/F øth Rear boss mount Th. 3. 3. Rod end nut H1 ø Cylinder tube form C1 X 1 C1. H1 M X 1. M1 X 1. M1 X 1. 1. 33. 33. X 3... With built-in One-touch fitting V -P1 (Piping Tube O..) With built-in One-touch fitting W1 øz1 Z1 P1 V.. W1. Standard size Stroke range to, to, to, W/o auto With auto switch switch 4. 3. 3. 4. 3. 4. 44 4. 3... 3 4 4.. 4 4 C 1 1 E 4 F.. H M X 1. M X 1. M X 1. I 3 J K 1 1 M N O. epth. epth epth. P Rc(PT)1/ Rc(PT)1/4 Rc(PT)1/4 Q. 1 S 3 Th. 3. 3. Z 3 41 1 4. 1.3- Refer to p..3-1 for details of rod end nut and optional brackets. Standard SCQ size, # (#+#) Rear boss mount dd rear boss mount to SCQ size, # (#+#). rawing is with auto switch. When auto switch is not required, delete it.

Compact Cylinder/Non-rotating Rod: ouble cting Single Rod Series CQK Foot/CQK, CQK H Y X 4-ø Z +Stroke X Y Y X G S+Stroke +Stroke 3. Special cap bolt Foot Stroke to, to, to, W/o auto switch With auto switch S S 3...... Z X Y. 3... 3 4. 3.. 1.... 3.. 4 3. 1. 1 G H X Y 1 1 1 3. 43. 43.. 4 33 3 4 4 4 1... Rod end nut 1. 1 Front flange/cqkf, CQKF FX FZ M FV 4-øF FT +Stroke +Stroke Front flange Stroke to, to, to, W/o auto With auto switch switch F FT FV FX FZ 1 M 4... 3.. 3.. 4 1 3. 4....... 1 43. 4 3 4 4 4 4 1 43. C CQS CQ Rod end nut Rear flange/cqkg, CQKG +Stroke +Stroke 1 FT FV M FX FZ 4-øF Rear flange Stroke to, to, to, W/o auto With auto switch switch 44. 4. 4. 4... 3 1. 33. 33. imensions except, and 1 are same as front flange type. M Rod end nut 1 ouble clevis/cqk, CQK CT 4-N Cap bolt øc hole H axis d ouble clevis Stroke to, to, to, Without auto switch With auto switch C CT C CW CX CZ C C.... 3.. 4.. 3.. 4.. 4.. 3.. 4.. 4 1 3 44 44 1. 33. 33. +Stroke C+Stroke +Stroke C CW RR CX +.4 +. -.1 CZ -.3 N M X 1. M X 1. M X 1. RR Refer to p..3-1 for details of rod end nut and optional brackets. Clevis pin and snap ring are packed with double clevis type. Rod end nut 1 Foot dd foot bracket # to SCQ size, # (#+#). Front flange dd front flange #3 to SCQ size, #3 (#+#). Rear flange dd rear flange #4 to SCQ size, #4 (#+#). ouble clevis dd double clevis # to SCQ size, # (#+#)..3-

Compact Cylinder/Non-rotating Rod: ouble cting ouble Rod Series CQKW ø, ø, ø, ø, ø, ø, ø, ø How to Order Standard CQKW With auto switch CQKW 3 S With auto switch (uilt-in magnet) size mm mm mm mm mm mm mm mm P Through-hole (Standard) oth ends tapped Foot Flange F Mounting ø to ø ø to ø Mounting brackets are shipped not assembled with the cylinder. Piping Screw-in piping With built-in One-touch fitting (1) Note 1) size with built-in One-touch fitting is ø to ø. Style Reed switch Special function Electrical entry Indicator Wiring (Output) ction ouble acting Refer to standard stroke table on p..3-1. oad voltage C C Without auto switch (uilt-in magnet) Refer to below table for selection of auto switch model no. pplicable uto Switches/Refer to p..3- for further information on auto switch. Solid state switch iagnostic ( color) iagnostic ( color) Grommet Water resistant ( color) With timer iagnostic output ( color) atch with diagnostic output ( color) 3 wire (Equiv. NPN) Yes Grommet No Yes Connector No Grommet Yes Grommet Connector Yes wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 4 wire (NPN) Cylinder stoke V V V, V 4V V V, V V, V V V, V V V, V 4V V V, V V V, V V V V 4V Rail mounting ø to ø irect mounting ø to ø Perp. In-line H Perp. V In-line 3 H 3H 3V 3 H V 3C C W FNV FPV FV JC FNWV FWV F FP J FW FPW JW F FNT FF ead wire length.m Example) C m Z Example) CZ 3m Example) C None N Example) CN Solid state switches marked with a are manufactured receipt of order. uto switch FF FNV FPV FV FNWV FPWV FWV S n 1 n ody option Standard (Rod end female thread) With rubber bumper C (only f with switch) M FN FP F FNW FPW FW F ead wire (m). () 3 () Number of auto switches (Z) None (N) pplicable load Relay, PC Relay, PC.3-

Compact Cylinder/Non-rotating Rod: ouble cting ouble Rod Series CQKW Style size Through-hole (Standard) Mounting oth ends tapped uilt-in magnet Pneumatic Piping Screw-in style One-touch fitting M X. M X. Note 1) Without auto switch: M X. Note ) When the style with built-in fitting is required, dimensions of ø, stroke are same as stroke. M X. M X. (1) M X. Rc(PT)1/ ø/4 () Rc(PT) 1/ ø/4 Rc(PT) 1/4 ø/ Rc(PT) 1/4 ø/ Order Made Made to Order Refer to p..4-1 for made to order specifications of CQKW series. Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. Caution Snap Ring IInstallation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Mounting q When removing a load, be sure to secure the wrench flats of the piston rod on the load side. w If this is done without securing the piston rod on the load side, be aware that the coupled (screw-in) portion of the piston rod could become loosened. Standard Specifications Style Fluid Proof pressure Max. operating pressure mbient and fluid temperature Rubber bumper Rod end thread Rod end thread tolerance Stroke length tolerance Mounting Piston speed Note 3) ø, with switch: Rubber bumper is standard. Minimum Operating Pressure size Min. operating press... Standard Stroke size,,,,, Theoretical Force size. nit: MPa.... llowable Kinetic Energy size Standard. Operating pressure (MPa).3.3.. Pneumatic (Non-lube) ir 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) None (3) Female thread JIS class +1. Through-hole to mm/s Non-rotating ccuracy size Non-rotating accuracy Standard stroke,, 1,,,,, 1,,,, 3,, 4,, 1,,,, 3,, 4,...1. size 1..4 nit: mm nit: N Operating pressure (MPa).3. 1.3. nit: J.. C CQS CQ M 4 4 4 31 3 e sing a non-rotating rod cylinder void using the air cylinder in such a way that rotational torque would be applied to the piston rod. If rotational torque is applied, the non-rotating guide will be deformed, causing a loss of non-rotating accuracy. se the chart below as a guide for the allowable rotational torque ranges. 1 1 1 4 4 41 1 Rotating torque. kgfcm or less ø ø ø ø ø ø ø ø.4 1... 4. 4. 4. 4. Operate the cylinder in such a way that the load to the piston rod is always applied in the axial direction..3-1

Series CQKW Weight nit: g Option Weights nit: g size Cylinder stroke size oth ends tapped 1 1 3 4 Rod end male Male thread 3 4 4 3 thread Nut 4 34 34 4 4 3 4 One-touch fitting 1 1 1 1 1 1 1 1 3 Foot 1 43 4 Flange 33 1 1 1 3 4 1 4 34 4 4 3 3 44 33 43 3 4 3 3 3 4 1 434 4 4 4 Calculation example: CQKW-M asic weight: CQKW- 44g dditional weight: oth ends tapped g g 3g Construction ø to ø ø to ø With fitting Component Parts No. escription q Cylinder tube w Piston e r t y u i o!!1!!3!4 Piston Piston Rod cover Collar for non-rotating Collar Snap ring ushing for non-rotating ushing Hex. socket head cap screw Hex. socket set screw Rod end nut One-touch fitting Material luminum alloy luminum alloy Stainless steel Carbon steel Stainless steel Carbon steel rass luminum alloy luminum alloy luminum bearing alloy luminum alloy casting Carbon tool steel Oil impregnated sintered alloy ead bronze casting lloy steel lloy steel Carbon steel Note Hard anodized Chromate ø to ø ø to ø, Hard chrome plated ø to ø ø to ø, Hard chrome plated ø, Nickel plated ø to ø, nodized ø to ø, nodized ø to ø, nodized ø to ø, Chromated, coated Phosphate coating ø to ø ø, ø ø to ø, Nickel plated ø to ø, Nickel plated Nickel plated ø to ø No.!!!!! escription Piston seal Rod seal for non-rotating Rod seal Gasket Piston gasket Material NR NR NR NR NR Replacement Parts: Seal Kits size Kit No. CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS Note ø to ø Note set of above nos.!,!,! and!. Seal kits are sets consisting of items!,!,! and!, which can be ordered using the order number for each cylinder bore size..3-

Compact Cylinder/Non-rotating Rod: ouble cting ouble Rod Series CQKW Mounting olt for CQKW Special bolt for through-hole mounting of CQKW is available as option. How to Order: Specify the required bolts Example) olt M3 X l pcs. Model C Mounting bolt C' ' Mounting bolt CQKW- - 4 M3 X l X 4 l 4 M3 X l X 4 l -1.3 X l.3 X l - X l X l - - CQKW- - 4 X l X l M3 X l X 4 l 4 X l X l M3 X l X 4 l -1 X l X l.. - X l X l - - CQKW- - -1-4 X l X l M X l X 4 l X l X l 4 X l X l M X l X 4 l X l X l - X l X l. - X l X l -3 - -4 - CQKW- - -1-4 X l X l X l X l M X 4 l X l X l X l 4 X l X l X l X l M X 4 l X l X l X l - X l X l. - X l X l -3 - -4 - CQKW- - -1 - X l X l X l X l M X l X l X l X l 4 X l X l X l X l M X 4 l X l X l X l - X l X l. - X l X l -3 - -4 - X l X l X l X l X l X l X l X l Model C Mounting bolt CQKW- - -1-4 M X 4 l X l X l X l - X l - X l -3 - -4 - CQKW- -1 - - - -3 - -4 - CQKW- -1 - - - -3 - -4 -.. X l X l X l X l M X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l C CQS CQ M Copper Free CQKW Size Stroke (M) Copper Free Series ø, ø, ø, ø, ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Specifications ction Cylinder bore size Proof Pressure Max. operating pressure Rubber bumper Piping Piston speed Mounting uto switch ouble acting double rod ø, ø, ø, ø, ø, ø, ø 1.MPa 1.MPa None Screw-in piping to mm/s Through-hole Mountable.3-3

Series CQKW uto Switch Specifications Refer to p..3- for details of auto switch. Weight size 3 31 4 Construction 1 1 4 4 4 1 3 31 4 Minimum Strokes for uto Switch Mounting Number of auto switches 1 -FV -JC -FV nit: g Cylinder stroke 3 4 1 1 3 4 1 3 333 3 3 34 34 3 3 4 43 4 4 1 44 3 1 4 3 1 - - -3C -C -V - -FWV -FWV 1 -H -H -F -J -F -FP -FW 1 1 Option Weights -W 1 nit: g size oth ends tapped 1 Rod end male Male thread 3 4 4 thread Nut 4 34 34 4 4 With fitting 1 1 Calculation example: CQKW-M dd each weight of auto switches and mounting brackets when auto asic weight: CQKW- 1g dditional weight: oth ends tapped g switches are required. g 4g Weight/uto Switch Mounting racket Part No. size Q-1 ø to ø Q- ø to ø Refer to p..3- for auto switch weight. -FW -JW -F -FF -F Weight (g) 1. 1. -FF -FN ø to ø ø ø to ø Component Parts NO. q w e r t y u i o!!1!!3!4 escription Cylinder tube Piston Piston rod Piston rod Rod cover Collar for non-rotating Collar Snap ring ushing for non-rotating ushing Hex. socket head cap screw Hex. socket head cap screw Hex. socket set screw Magnet Material luminum alloy luminum alloy Stainless steel Carbon steel Stainless steel Carbon steel rass luminum alloy luminum alloy luminum bearing alloy luminum alloy casting Carbon tool steel Oil impregnated sintered alloy ead bronze casting lloy steel lloy steel lloy steel Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø to ø ø to ø, Hard chrome plated ø, Nickel plated ø to ø, nodized ø to ø, nodized ø to ø, nodized ø to ø, Chromated, coated Phosphate coating ø to ø ø, ø ø to ø, Nickel plated ø, Nickel plated ø to ø, Nickel plated NO.!!!!! escription Piston seal Rod seal for non-rotating Rod seal Gasket Piston gasket Material NR NR NR NR NR Replacement Parts: Seal Kits size Kit No. CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS CQKW-PS Note ø to ø Note set of above nos.!,!,! and!. Seal kits are sets consisting of items!,!,! and!, which can be ordered using the order number for each cylinder bore size..3-4

Compact Cylinder/Non-rotating Rod: ouble cting ouble Rod Series CQKW Mounting olt for CQKW with uto Switch Special bolt for through-hole mounting of CQKW is available as option. How to Order: Specify the required bolts. Ex.) olt M3 X l pcs. Mounting at non-rotating side Model CQKW-C -C -1C -C -C -C CQKW- - -1 - - - CQKW- - -1 - - - -3 - -4 - CQKW- - -1 - - - -3 - -4 - CQKW- - -1 - - - -3 - -4 - C.1. 4 4 4 4 Mounting bolt M3 X l X 4 l X l X l X l X l M3 X 4 l X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l M X 4 l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l X l C'.1.. ' 4 Mounting bolt M3 X 4 l X l X l X l X l X l M3 X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l X l Model CQKW- - -1 - - - -3 - -4 - CQKW- -1 - - - -3 - -4 - CQKW- -1 - - - -3 - -4 - C.. Mounting bolt M X l X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l M X l X l X l X l X l X l X l X l X l C CQS CQ M uto Switch Mounting racket Part No. size / / / / Part No. Q-1 Q- Note Switch mounting screw (M3 X. X l ) Square nut Switch mounting screw (M3 X. X l ) Switch spacer Switch mounting nut pplicable switch Reed switch Solid state switch -, -3C, C -H, H -W -F, J -FV -JC -FW, JW -FWV -F -FF -FNT Mounting screw set made by stainless steel Following stainless steel mounting screw set (including nut) is provided. se them in accordance with environment. (uto switch interface is not included. Order it separately.) : For -//F/J When -F mounted on cylinder is required, the stainless steel screw mentioned above is used at shipping. When auto switch unit is shipped, is attached..3-

.3- Series CQKW uto Switch Mounting Position (at Stroke End) and Mounting Height size uto Switch Mounting Position uto Switch Mounting Height.. 1. 1. 1... 1 1.. 1...... 1. 1 1....... 1 1 1. 1. 1. 1. 1 1. 1. 1 3. 1.. 1. 1... 31. 34. 3. 4 4 4.. 3.... 3 4 4. 1.. 4.. 31. 3 41 4. 3 31 3 3. 44. 1 31 34 3 41. 4. 4 34 3. 43. - - -H/H -3C/C -F/J -FV/JC -W -F -FW -FF -JW -FWV - -V - - -F -FV -FW -FWV -F 1.. 4. 3. 1 1. 1. 1 3.. -H -H -F -J -FW -FW -F -FF -FNT -3C -C -FV -FWV -JC -W. 3. -V. 3. 4 -FV -FWV. 3 3. -FW -F

Series CQKW ø to ø Without uto Switch ø to ø ø 1. 1. C1 1. H1 M X. M X 1. M X 1. M X 1. M X 1. 1 1. 1... X. 1. 3. With built-in One-touch Fitting/ø Standard Stroke range to to to to to 3. 3.. 3 31 43 34 4 3 3. C E 3 4 F.. G 1. 1. H M3 X. M4 X. M X. M X 1. M X 1. ouble rod (ø,, ) Change SCQ size,, #. ouble rod (ø, ) Change SCQ size,, #. The diagram shows with an auto switch, which may be deleted if unnecessary. I 3 4 J 4. K1. K 3. 3. 4. imensions of ø, stroke with built-in One-touch fitting are same as stroke. M 1.. 34 N 3. 3.... P Q M X. 1 M X. 1 M X. 1. M X. 1 M X. 1. RC(PT)1/ 1 1 1 Th.43..43.43. W 4. Refer to p..3-1 for details rod end nut and optional bracket. Z.3-

Compact Cylinder/Non-rotating Rod: ouble cting ouble Rod Series CQKW ø to ø With uto Switch Standard (Through-hole)/CQKW ø, ø ø, ø ø to ø Piston rod cross section 1 C1 H1.4 3. 1 1. 1... 1. X. 1. 3. M X. M X 1. M X 1. M X 1. M X 1. C CQS CQ M bove auto switch: -3/. Refer to p..3- for auto switch mounting position and mounting height. Standard Stroke range C E F G H I J K1 K M N p Q S Th V Z to 44.4 3.4. 1. M3 X.. 3. 3. M X. 1. 3. 1. 1. to 4 41 3 1. M4 X. 3. 3. M X. 1 41... to 4 4. M X. 4. 3. M X. 1. 4. 4. 3 to 4 M X 1.. M X. 1 3. 1.. to. 4. 4. M X 1. 4. 34. Rc(PT) 1/ 1.. 1. 31. Refer to p..3-1 for details of rod end nut and optional Standard Standard bracket. CQKW SCQ, #+# CQKW SCQ, #+# CQKW SCQ, #+# CQKW SCQ, #+# CQKW SCQ, #+#.3-

Series CQKW/CQKW ø to ø Standard (Through-hole)/CQKW, CQKW With uto Switch (For those without auto switches, refer to dimensions tabel because and dimensions vary.) oth ends tapped: CQKW/CQKW oth ends tapped O1 M X 1. M X 1. M X 1. R 1 Piston rod cross section One-touch Without fitting auto switch 1 1.. C1. H1 M X 1. M1 X 1. M1 X 1. 1. 33. 33. X 3... With built-in One-touch fitting With built-in One-touch fitting Z1 P1 V.. W1. bove auto switch: -3/. Refer to p..3- for auto switch mounting position and mounting height. Standard Stroke range to to to W/o auto switch 4.. 4 W/ auto switch 4.. C 1 1 E 4 H M X 1. M X 1. M X 1. I 3 J K1 1 1 K 1 1 M N.. O P Q epth Rc(PT)1/ epth Rc(PT)1/4 epth. Rc(PT)1/4 1. S 3 Th. 3. 3. Z 3 41 1 4. 1 ouble rod (ø,, ) Change SCQ size, #. The diagram shows with an auto switch, which may be deleted if unnecessary. Refer to p..3-1 for details of rod end nut and optional bracket..3-

Compact Cylinder/Non-rotating Rod: ouble cting ouble Rod Series CQKW ø to ø Foot/CQKW, CQKW Without auto switch 1. With auto switch 1. 1 3. 43. 43. Foot Stroke range Without auto switch With auto switch S S G H T X Y Z X Y to to 4.. 4 1. 4.. 34. 1 1. 4 33 3 3. 3. 4.. C to 4 1 4 3. 1. 1. CQS Flange/CQKWF, CQKW CQ M Without auto switch 1. With auto switch 1. 3 3. 43. 43. 4. 33. 33. bove auto switch: -3/ Refer to p..3- for auto switch mounting position and mounting height. Flange Stroke range Without With auto switch auto switch F FT FV FX FZ 1 M to 4 4. 4 1 to..... 1 to 4 1 Refer to p..3-1 for rod end nut and optional bracket. ouble rod (ø,, ) Change SCQ size #. The diagram shows with an auto switch, which may be deleted if unnecessary..3-1

Compact Cylinder/xial Piping: ouble cting Single Rod Series CQP ø, ø, ø, ø, ø, ø, ø, ø, ø, ø How to Order Standard CQP With auto switch CQP 3 S With auto switch (uilt-in magnet) xial piping H Mounting Through-hole Style Pneumatic ir-hydro (1) Note 1) ir-hydro tube: size ø to ø ction ouble acting Cylinder stroke Refer to standard stroke table on p..3-3 uto switch Without auto switch Refer to table below for auto switch model no. selection. ody option C M Number of auto switches S n 1 n Standard (Rod end female thread) With rubber bumper () Combination of body option is possible. CM Note ) Rubber bumper for air hydraulic type is not available. size mm mm mm mm mm mm mm mm mm mm pplicable uto Switches/Refer to p..3- for further information on auto switch. Style Reed switch Solid state switch Special function iagnostic ( color) iagnostic ( color) Electrical entry Indicator Yes Grommet No Yes Connector No Grommet Yes Grommet Connector Water resistant ( color) Grommet With timer iagnostic output ( color) atch type with diagnostic output ( color) Wiring (output) 3 wire (Equiv. NPN) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) Yes 3 wire (PNP) wire 3 wire (NPN) 4 wire (NPN) oad voltage C C V V V, V V or less 4V V V, V 4V or less 4V V V V, V V V, V V V, V uto switch model Perpendicular 3 3C C W FNV FPV FV JC FNWV FWV In-line H H 3H H F FP J FW FPW JW F FNT FF FF ead wire (m). () 3 () (Z) None (N) pplicable load Relay, PC Relay, PC ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switches marked with a "O" are manufactured upon receipt of order..3-

Compact Cylinder/xial Piping: ouble cting Single Rod Series CQP Model size Mounting Through-hole (Std.) uilt-in magnet Rod end male thread Pneumatic ir-hydro Piping Screw-in style Rubber bumper Mounting Through-hole (Std.) uilt-in magnet Piping Screw-in style M X. M X. M X. M X. M X. M X. Rc(PT) 1/ Rc(PT) 1/ Rc(PT) 1/ Rc(PT) 1/ Rc(PT) 1/4 Rc(PT) 1/4 Rc(PT) 1/4 Rc(PT) 1/4 Rc(PT) 3/ Rc(PT) 3/ Rc(PT) 3/ Rc(PT) 3/ uto Switch Mounting racket Part No. size / / / / / Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions, precautions on the products mentioned in this catalog and common precautions. Caution Snap Ring Installation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Mounting/Removing q o not remove the hexagon socket set screw on the side of the rod. e aware that if the hexagon socket set screw is removed with compressed air supplied to the cylinder, an internal steel ball could fly out or the compressed air could be discharged, leading to injury to humans or damage to peripheral equipment. Part No. Q-1 Q- Note Switch mounting screw (M3 X. X l) Square nut Switch mounting screw (M3 X. X l) Switch mounting screw Switch mounting nut Standard Specifications Style Fluid Proof pressure Max. operating pressure mbient and fluid temperature Rubber bumper Rod end thread Rod end thread tolerance Stroke length tolerance Mounting Piston speed Minimum Operating Pressure size Pneumatic (non-lube) ir-hydro Standard Stroke. size Standard type. With rubber bumper.43. llowable Kinetic Energy.3. Pneumatic (Non-lube) ir-hydro ir Turbine oil (1) 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) None Female thread JIS class +1. Through-hole to mm/s to mm/s..1.. Pneumatic (Non-lube) nit: mm size, Standard stroke,, 1,,,,,,,,, 1,,,, 3,, 4,,, 1,,,, 3,..1..1..1.1..... ir-hydro size,,...4.1... 1.4 nit: MPa.... 1.3.1 Standard stroke,, 1,,,, 3,, 4,,, 1,,,, 3,, 4,,,, 4,,,,, 1,,,, 3,,, 1,,,, 3,,, 4,,, 4,,, Refer to p..3-3 for intermediate stroke (except air hydraulic type) pplicable switch Reed switch -, -3C, C -H, H -W Solid state switch -F, J -FV, -JC -FW, JW -FWV, -F -FF, -FNT nit: J. 4.4 nit: mm Stainless steel mounting bolt set The set of stainless steel mounting screws (with nut) described below is available and can be used depending on the operating environment. (The spacer for auto switches must be ordered separately, as they are not included.) : For -//F/J The stainless steel bolts described above are used when the - F type switch is shipped mounted on a cylinder. When the switches are shipped as individual parts, the set is included..3-3 C CQS CQ M

Series CQP Theoretical Force size Operating direction IN OT IN OT IN OT IN OT IN OT OT IN nit: N Operating pressure (MPa).3 34 4 1 4 1 41. 4 1 1 1 4. 1 4 344 4 Weight size 4 4 3 4 4 4 14 1 4 1 1 4 1 Cylinder stroke 3 1 1 3 4 4 1 1 4 33 3 1 1 1 3 4 3 3 3 31 4 1 43 4 1 343 4 3 1 34 1 1 3 3 4 44 1 nit: g 4 3 4 1 4 3 3 3 IN OT IN OT IN OT IN OT IN OT 31 3 4 41 3 1 1 3 1 3 3 1 1 1 31 3 Option Weights size Rod end male Male thread 1. 3 thread Nut 1 4 1 1 With rubber bumper 3 3 Calculation example: CQP-CM asic weight: CQP- g dditional weight: 43g With rubber bumper 3g g 3 3 1 nit: g 1 4 1 31 Mounting olt for CQP Special bolt for through hole mounting of CQP is available as option. How to Order: Specify the required bolts. Example) olt M3 X l pcs. Model CQP- - -1 - - - CQP- - -1 - - - CQP- - -1 - - - -3 - -4 - CQP- - -1 - - - -3 - -4 -.3-4 C... 3 4 3 4 3 4 3 4 Mounting bolt M3 X l X l X 3 l X l X 4 l X l M3 X l X l X 3 l X l X 4 l X l M X l X l X 3 l X l X 4 l X l X l X l X l X l M X l X 3 l X l X 4 l X l X l X l X l X l X l Model CQP- - -1 - - - -3 - -4 - - - CQP- - -1 - - - -3 - -4 - - - CQP- -1 - - - -3 - -4 - - - C.. 3 4 1 3 4 1 4 Mounting bolt M X l X 3 l X l X 4 l X l X l X l X l X l X l X 1 l X l M X 3 l X l X 4 l X l X l X l X l X l X l X l X l X 1 l M X 4 l X l X l X l X l X l X l X l X l X l X l Model CQP- -1 - - - -3 - -4 - - - CQP- -1 - - - -3 - -4 - - - CQP- -1 - - - -3 - -4 - - - C. 1 1. 1 1 1 1 Mounting bolt M X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X 1 l X 1 l M X l X l X l X l X l X l X l X l X l X 1 l x l

Series CQP uto Switch Specifications Refer to p..3- for details of auto switch. Option Weights size Rod end Male male thread thread Nut With rubber bumper size Rod end Male male thread thread Nut With rubber bumper Construction 1. 1 1 3 1 3 4 3 1 3 4 31 nit: g 1 3 1 1 Weight 4 1 1 1 1 31 Minimum Strokes for uto Switch Mounting No. of auto switches 1 4 34 4 4 1 3 31 34 -FV -JC 1 3 4 4 Cylinder stroke 3 1 31 43 1 1 44 33 44 1 - - -3C -C 3 1 3 4 3 1 3 4 4 -FWV 4 4 4 3 1 4 43 4 1 4 4 4 3 -H -H -F -J 1 1 1 1 Note) Refer to p..3- (CQ double acting) for auto switch specifications. nit: g Calculation example: CQP-CM asic weight: CQP- g dditional weight: 43g With rubber bumper 3g 3g dd each weight of auto switches and mounting brackets. 1 Weight/uto Switch Mounting racket Mounting Weight bracket size (g) Q-1 ø to ø 1. Q- ø to ø 1. Refer to p..3- for auto switch weight. -W 1 -FW -JW -F -FF -FF C CQS CQ M Component Part No. q w e r t y u i o!!1! escription Cylinder tube Piston Piston rod Collar Snap ring ushing Magnet Steel ball Hex socket set screw Piston seal Rod seal Gasket Material luminum alloy luminum alloy Stainless steel Carbon steel luminum bearing alloy luminum alloy casting Carbon tool steel ead bronze casting earing steel lloy steel NR NR NR Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø to ø, Chromated, coated Phosphate coating Only used for ø or larger Zinc chromated Replacement Parts: Seal Kits size Kit No. Pneumatic (non-lube) CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS ir-hydro CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS Note set of left nos.!,!1 and! Seal kits are sets consisting of items!,!1 and!, which can be ordered using the order number for each cylinder bore size..3-

Series CQP Construction Component Parts No. escription q Cylinder tube w Piston e Piston rod r t y u i o!!1!!3!4 Collar Snap ring ushing Rod end nut umper umper Steel ball Hexagon socket set screw Piston seal Rod seal Gasket Material luminum alloy luminum alloy Stainless steel Carbon steel luminum bearing alloy luminum alloy casting Carbon tool steel ead bronze casting Carbon steel rethane rethane earing steel lloy steel NR NR NR Note Hard anodized Chromated ø to ø ø to ø, Hard chrome plated ø to ø, nodized ø to ø, Chromated, coated Phosphate coating Only used for ø or larger Nickel plated Zinc chromated On bore size ø with rubber bumper style, piston and piston rod are integrated (Stainless steel). Replacement Parts: Seal Kits size Kit No. Pneumatic (Non-lube) CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS ir-hydro CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQH-PS CQ-PS CQH-PS Note set of left nos.!,!3 and!4. Seal kits are sets consisting of items!,!3 and!4, which can be ordered using the kit number for each cylinder bore size. Copper Free CQP size Stroke Copper free series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Specifications ction Cylinder bore size Proof Pressure Max. operating pressure Rubber bumper Piping Piston speed Mounting uto switch ouble acting single rod ø, ø, ø, ø, ø, ø, ø, ø, ø, ø 1.MPa 1.MPa None Screw-in piping to mm/s Through-hole Mountable.3-

Compact Cylinder/xial Piping: ouble cting Single Rod Series CQP Mounting olt for CQP with uto Switch Special bolt for through-hole of CQP mounting is available as option. How to Order: Specify the required bolts. Example) olt M3 X 3 l pcs. Model CQP- - -1 - - - CQP- - -1 - - - CQP- - -1 - - - -3 - -4 - CQP- - -1 - - - -3 - -4 - C... 3 4 4 4 4 Mounting bolt M3 X 3 l X l X 4 l X l X l X l M3 X l X 4 l X l X l X l X l M X l X 4 l X l X l X l X l X l X l X l X l M X l X 4 l X l X l X l X l X l X l X l X l Model CQP- - -1 - - - -3 - -4 - - - CQP- - -1 - - - -3 - -4 - - - CQP- -1 - - - -3 - -4 - - - C.. 4 1 4 1 Mounting bolt M X l X 4 l X l X l X l X l X l X l X l X l X 1 l X l M X 4 l X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X l X l uto Switch Mounting Position (at Stroke End) and Mounting Height - - -H -FW -H -JW -F -FF -J -FNT -F -3C -C -JC Model CQP- -1 - - - -3 - -4 - - - CQP- -1 - - - -3 - -4 - - - CQP- -1 - - - -3 - -4 - - - -W -FWV -FV C. 1 1. 1 1 1 1 1 Mounting bolt M X l X l X l X l X l X l X l X l X l X l X 1 l M X l X l X l X l X l X l X l X l X l X 1 l X 1 l M X l X l X l X l X l X l X l X 1 l X l X 1 l X l C CQS CQ M ø to ø ø to ø uto Switch Mounting Position size - - 4..... 1. 1..... 1 4 -H/H -3C/C -F/-J /FV JC... 1 1.... 1 1. 4. -W... 1 1. 3. 4 4. 3. 1. 1. -F -FW -FF -JW -FWV. 1. 1. 1.... 1.. uto Switch Mounting Height - - 1.. 4.. 31. 3 41 4... -H/-H -F/-J/-FW -JW/-F -FF/-FNT. 3.... 3 4 4... -3C -C.. 31. 34. 3. 4 4 4. 4. 4. -FV -FWV 3 31 3 3. 44. 1 1 1 -JC -W 31 34 3 41. 4. 4 4 4 34 3. 43..3-

Series CQP ø to ø Without uto Switch ø to ø C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. Standard Stroke range to to to to. 4. 1 1. 1.. C E 3 33 E1 1 1 1. E 1 1 F 1 1 4 H M3 X. M4 X. M X. M X 1. I 3 4 K 3. 3. 4. M 3 N 3. 3... O. epth 3.. epth 3. epth epth W 3 41. Standard C1.... X 3. 3... 3. 3. H1 M X 1. M X 1. M1 X 1. M1 X 1. M X 1. M X 1. 1.. 33. 33. 43. 43. Stroke range C E F H I J K M N O P Q W Z to, to, to, to, to, to, 3. 4. 3. 4. 44 4 3.. 3 33. 3... 3 4 43. 3. 3 1 1 1 4 4 1 1 M X 1. M X 1. M X 1. M X 1. M X. M X. 3 1 1. 1. 1 1 34 4... epth epth epth epth. 1. epth. 1. epth. Rc(PT)1/ Rc(PT)1/ Rc(PT)1/4 Rc(PT)1/4 Rc(PT)3/ Rc(PT)3/... 1 4. 3 3 4 4 Note) imensions with rubber bumper are the same, as the above. Refer to p..3-1 for details of rod end nut and optional bracket. Standard SCQP size, #1 (#1+#4) Single acting Spring return SCQP size, # Single acting Spring extend SCQP size, #3 The diagram shows with an auto switch, which may be deleted if unnecessary..3-

ø to ø Compact Cylinder/xial Piping: ouble cting Single Rod Series CQP ø to ø With uto Switch Standard bove auto switch: - Refer to p..3- for auto switch mounting position and mounting height. C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. Stroke range to to to to 31. 34 3 3.. 31.. 33 1. Note 1) imensions with rubber bumper are same as above standard type. C E 3 E1 1 1 E 1 1 F 1 1 4 H M3 X. M4 X. M X. M X 1. I 3 4 K 3. 3. 4. M 3 N 3. 3... O. epth 3.. epth 3. epth epth S. 3. 41. 4 1.. 4.. W 3 41. C ø to ø CQS CQ M Standard Stroke range to to to to to to bove auto switch: - Refer to p..3- for auto switch mounting position and mounting height. 4. 4. 4. 33 3.. 4 3. 1 1 1 4 4 1 1 Note 1) imensions with rubber bumper are same as above standard type. C E F H M X 1. M X 1. M X 1. M X 1. M X. M X. I 3 1 1 J. 1. K 1 1 M 34 4 N... O C1.... epth epth epth epth. 1. epth. 1. epth. X 3. 3... 3. 3. H1 M X 1. M X 1. M1 X 1. M1 X 1. M X 1. M X 1. P Rc(PT)1/ Rc(PT)1/ Rc(PT)1/4 Rc(PT)1/4 Rc(PT)3/ Rc(PT)3/ 1.. 33. 33. 43. 43. Q.. S 4. 1. 3. 31. 3 41 4... W. 1 4. Z 3 3 4 4 Standard SCQP size, #1 (#1+#4) Single acting Spring return SCQP size, # Single acting Spring extend SCQP size, #3.3-

Compact Cylinder/xial Piping: Single cting Single Rod Series CQP ø, ø, ø, ø, ø, ø, ø How to Order Standard CQP T With auto switch CQP T 3 S With auto switch (uilt-in magnet) xial piping Mounting Through-hole size mm mm mm mm mm mm mm ction S Single acting/spring return T Single acting/spring extend Cylinder stroke Refer to standard stroke table on p..3-1. uto switch Without auto switch (uilt-in magnet) Refer to table below for auto switch model selection. Number of auto switches S n 1 n ody option Standard (Rod end female thread) M pplicable uto Switches/Refer to p..3- for further information on auto switch. Style Reed switch Solid state switch Special function Electrical entry Indicator Yes Grommet Wiring (Output) 3 wire (Equiv. NPN) oad voltage C C V V Parpendicular 3 No wire V, V V 4V Yes V 3C Connector No V, V 4V C iagnostic ( color) Grommet Yes W 3 wire (NPN) FNV V, V Grommet 3 wire (PNP) FPV FV wire V Connector JC 3 wire (NPN) FNWV iagnostic V, V ( color) Yes 3 wire (PNP) 4V FWV wire V Water resistant ( color) Grommet With timer 3 wire (NPN) iagnostic output ( color) V, V atch with diagnostic 4 wire (NPN) output ( color) ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switches marked with a " " are manufactured upon receipt of order. V V uto switch model In-line H H 3H H F FP J FW FPW JW F FNT FF FF ead wire (m). () 3 () (Z) None (N) pplicable load Relay, PC Relay, PC.3-

Compact Cylinder/xial Piping: Single cting Single Rod Series CQP Style size Mounting Through-hole (Standard) Pneumatic uilt-in magnet Piping Screw-in M X. M X. M X. M X. Rc(PT) 1/ Rc(PT) 1/ Rc(PT) 1/4 Standard Specification Style Fluid Proof pressure Max. operating pressure mbient and fluid temperature Rubber bumper Rod end thread Rod end thread tolerance Stroke length tolerance Mounting Piston speed Pneumatic (Non-lube) ir 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) None Female thread JIS class + 1. Through-hole to mm/s Caution Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. Snap Ring Installation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Minimum Operating Pressure size Single acting (Spring return / Spring extend) Standard Stroke size size...1 Standard stroke,, uto Switch Mounting racket Part No.,,, Part No. Q-1 Q- Note Switch mounting screw (M3 X. X l) Square nut Switch mounting screw (M3 X. X l) Switch interface Switch mounting nut.1.1 nit: mm pplicable switch Reed switch -, -3C, C -H, H -W.1 nit: MPa. Solid state switch -F, J -FV -JC -FW, JW -FWV -F -FF -FNT Stainless steel mounting bolt set The set of stainless steel mounting screws (with nut) described below is available and can be used depending on the operating environment. (The spacer for auto switches must be ordered separately, as they are not included.) : For -//F/J The stainless steel bolts described above are used when the - F type switch is shipped mounted on a cylinder. When the switches are shipped as individual parts, the set is included. C CQS CQ M.3-1

Series CQP Theoretical Force ction size Spring extend Spring return nit: N Operating pressure (MPa).3 1 4 33 3 4 1 1 31 4. 44 4 3 31 4 1. 3 33 41 4 4 4 3 Weight ction size Spring extend Spring return 33 3 3 33 3 Cylinder stroke 1 4 3 4 4 4 1 4 4 nit: g 1 Refer to p..-3 for spring force. Mounting olt for CQP Special bolt for through-hole mounting of CQP is available as option How to Order: Specify the required bolts. Example) olt M3 X l 4pcs. Option Weights size Male thread Nut 1. 1 3 4 1 1 nit: g 3 Calculation example: CQP-SM asic weight: CQP-S dditional weight: g 43g g Spring return Model CQP-S -S CQP-S -S CQP-S -S CQP-S -S CQP-S -S CQP-S -S CQP-S -S C..... 3 3 3 4 Mounting bolt M3 X l X l M3 X l X l M X l X l M X l X 3 l M X l X 3 l M X 3 l X l M X 4 l X l Spring extend Model CQP-T -T CQP-T -T CQP-T -T CQP-T -T CQP-T -T CQP-T -T CQP-T -T C..... 3 3 3 4 Mounting bolt M3 X l X l M3 X l X l M X l X l M X l X 3 l M X l X 3 l M X 3 l X l M X 4 l X l.3-

Compact Cylinder/xial Piping: Single cting Single Rod Series CQP Construction Component Parts No. q escription Cylinder tube Material luminum alloy Note Hard anodized w Piston luminum alloy Chromated e r Piston rod Collar Stainless steel luminum bearing alloy ø to ø ø to ø, nodized Carbon steel luminum alloy casting ø to ø, Hard chrome plated ø, Chromated, coated t y u Snap ring ushing Return spring Carbon tool steel ead bronze casting Piano wire Phosphate coating sed for only ø Zinc chromated i ronze element Sintered metal C o Snap ring Carbon tool steel Port size Rc(PT)1/, 1/4!!1!!3!4!! Plug with fixed orifice Steel ball Hexagon socket set screw Rod end nut Piston seal Rod seal Gasket lloy steel Carbon steel lloy steel Carbon steel NR NR NR Port size M X. Zinc chromated Nickel plated On spring extend (T type), piston and piston rod are integrated (Stainless steel). Copper Free Replacement Parts: Seal Kits size Kit No. Contents CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS set includes!4,! and!. Seal kits are sets consisting of items!4,! and!, which can be ordered using the kit number for each cylinder bore size. C CQS CQ M CQP Copper free size Stroke S T (M) ø, ø, ø, ø, ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Specifications ction Cylinder bore size Proof pressure Max. operating pressure Rubber bumper Piping Piston speed Mounting uto switch Single acting single rod ø, ø, ø, ø, ø, ø, ø 1.MPa 1.MPa None Screw-in piping to mm/s Through-hole Mountable.3-3

Series CQP uto Switch Specifications Refer to p..3- for details of auto switch. Minimum Strokes for uto Switch Mounting No. of auto switches -FV -JC - - -3C -C -FWV 1 1 Refer to p..3- (CQ ouble cting) for auto switch specifications. -H -H -F -J 1 1 -W 1 -FW -JW -F -FF Weight ction Spring extend Spring return size 1 1 1 3 1 34 nit: g Cylinder stroke 1 4 34 41 1 1 3 3 Option Weights size Rod end Male thread male thread Nut 1. 1 3 Calculation example: CQP-SM asic weight: CQP-S 4g dditional weight: 43g g 4 Weight/uto Switch Mounting racket racket part. Q-1 Q- size ø to ø ø to ø Weight (g) 1. 1. Refer to p..3- for auto switch weight. 1 1 nit: g 3 dd each weight of auto switches and mounting brackets when auto switches are mounted. Construction Spring return Spring extend - section (Rod side port) - section (Head side port) - section (Rod side port) - section (Head side port) Component Parts No. escription Material Note q w Cylinder tube Piston luminum alloy luminum alloy Hard anodized Chromated e r Piston rod Collar Stainless steel luminum bearing alloy ø to ø ø to ø, nodized Carbon steel luminum alloy casting ø to ø, Hard chrome plated ø, Chromate, coated t y u Snap ring ushing Return spring Carbon tool steel ead bronze casting Piano wire Phosphate coating sed for only ø Zinc chromated i ronze element Sintered metal C o Snap ring Carbon tool steel Port size Rc(PT)1/, 1/4!!1!!3!4!! Plug with fixed orifice Steel ball Hexagon socket set screw Magnet Piston seal Rod seal Gasket lloy steel earing steel lloy steel NR NR NR Port size M X. Zinc chromated On spring extend (T type), piston and piston rod are integrated (Stanless steel)..3-4 Replacement Parts: Seal Kits size Kit No. Contents CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS CQ-PS set includes.!4,! and! Seal kits are sets consisting of items!4,! and!, which can be ordered using the kit number for each cylinder bore size.

Compact Cylinder/xial Piping: Single cting Single Rod Series CQP Mounting olt for CQP with uto Switch Special bolt for through-hole mounting of CQP is available as option. How to Order: Specify the required bolts Example) olt M3 X 3 l pcs. Spring return Model CQP-S -S CQP-S -S CQP-S -S CQP-S -S CQP-S -S CQP-S -S CQP-S -S C..... 3 4 4 4 4 4 Mounting bolt M3 X 3 l X l M3 X l X 4 l M X l X 4 l M X l X 4 l M X l X 4 l M X 4 l X l M X l X l Spring extend Model CQP-T -T CQP-T -T CQP-T -T CQP-T -T CQP-T -T CQP-T -T CQP-T -T C.1.... 4 4 4 4 4 4 Mounting bolt M3 X l X 4 l M3 X l X 4 l M X l X 4 l M X l X 4 l M X l X 4 l M X 4 l X l M X l X l uto Switch Mounting position (at Stroke End) and Mounting Height - - -H -FW -H -JW -F -FF -J -FNT -F -3C -C -JC -W -FWV -FV C CQS ø to ø CQ M ø to ø uto Switch Mounting Position/Spring return (Spring extend) size - - 4..(.).. ( ): Spring extend.() ()... -H/H -3C/C -F J -FV/JC ()... (.).(.).. -W (3)... 3(.).(4.) 4 4. 3. -F -FW -FF -JW -FWV (). 1. 1. (.).(.).. uto Switch Mounting Height - - 1.. 4.. 31. 3 41 -H/-H -F -J/-FW -JW/-F -FF/-FNT. 3.... 3 4-3C -FV -C -FWV.. 31. 34. 3. 4 4 3 31 3 3. 44. -JC -W 31 34 3 41. 4. 34 3. 43..3-

Series CQP ø to ø Spring Return Without uto Switch ø to ø C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. Standard st.. st. 34 3. st 3. 4.. st... C E 3 33 E1 1 1 1. E 1 1 F.. H M3 X. M4 X. M X. M X 1. I 3 4 K 3. 3. 4. M 3 N 3. 3... O. epth 3.. epth 3. epth epth W 3 41. ø to ø C1.. X 3. 3.. H1 M X 1. M X 1. M1 X 1. 1.. 33. Standard st 3 41. st 4. 4. st. st 34. Standard CQP SCQP, # CQP SCQP, # CQP SCQP, # CQP SCQP, # st 33 3.. st. C 1 E 4 4 F.. Standard CQP SCQP, # CQP SCQP, # CQP SCQP, # H M X 1. M X 1. M X 1. I J. K 1 M 34 N... O epth epth epth P Rc(PT)1/ Rc(PT)1/ Rc(PT)1/4 Q W. Z 3 Refer to p..3-1 for rod end nut and optional bracket..3-

Compact Cylinder/xial Piping: Single cting Single Rod Series CQP ø to ø Spring Return With uto Switch ø to ø bove auto switch: -3/ Refer to p..3- for auto switch mounting position and mounting height. C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 1. 1.. Standard st st st st 3. 3 41 4. 41. 44 4 4. 33 3. 3. 3. 3. 41. 4. C E 3 33 E1 1 1 1. E 1 1 F.. H M3 X. M4 X. M X. M X 1. I 3 4 K 3. 3. 4. M 3 N 3. 3... O. epth 3.. epth 3. epth epth S. 3. 41. 4 1.. 4.. W 3 41. C ø to ø CQS CQ M bove auto switch: -3/ Refer to p..3- for auto switch mounting position and mounting height. C1.. X 3. 3.. H1 M X 1. M X 1. M1 X 1. 1.. 33. Standard st st st st st st 4 1.... 3 44. 43 4... With auto switch Standard CQP dd #4 to SCQP, # CQP dd #4 to SCQP, # CQP dd #4 to SCQP, # CQP dd #4 to SCQP, # C 1 E 4 4 F.. H M X 1. M X 1. M X 1. I J. K 1 With auto switch Standard CQP dd #4 to SCQP, # CQP dd #4 to SCQP, # CQP dd #4 to SCQP, # M 34 N... O epth epth epth P Rc (PT) 1/ Rc (PT) 1/ Rc (PT) 1/4 Q S 4. 1 31. 3 41 W. Z 3 Refer to p..3-1 for rod end nut and optional bracket..3-

Series CQP ø to ø Spring Extend Without uto Switch ø to ø C1 1 H1 M X. M X 1. M X 1. M X 1. 1 X st st 1. 3.. 4.... 1. Standard st st st st. 34 3.. 4 44 4. 3. 4..... C E 3 33 E1 1 1 1. E 1 1 F.. H M3 X. M4 X. M X. M X 1. I 3 4 K st st...... 1 M 3 N 3. 3... O. epth 3.. epth 3. epth epth W 3 41. ø to ø C1.. X 3. 3.. H1 M X 1. M X 1. M1 X 1. st 33. 33. 1 st st 3. 3. 43. 3. Standard st st st st st st 4.... 34. 33 3... C 1 E 4 4 F.. H M X 1. M X 1. M X 1. I J. K 1 st st st 1 1 1 M 34 N... O epth epth epth P Rc (PT) 1/ Rc (PT) 1/ Rc (PT) 1/4 Q W. Z 3 Refer to p..3-1 for rod end nut and option bracket..3- Standard CQP SCQP, #3 CQP SCQP, #3 CQP SCQP, #3 CQP SCQP, #3 Standard CQP SCQP, #3 CQP SCQP, #3 CQP SCQP, #3

Compact Cylinder/xial Piping: Single cting Single Rod Series CQP ø to ø Spring Extend With uto Switch bove auto switch: -3/ Refer to p..3-4 for auto switch mounting position and mounting height. C1 1 X. 1. H1 M X. M X 1. M X 1. M X 1. 1 st st 1. 3.. 4... Standard st st st st 4. 44 4 4.. 4. 3.4 3. 3. 3. 4.4. 41. 4. C E 3 33 E1 1 1 1. E 1 1 F.. H M3 X. M4 X. M X. M X 1. I 3 4 K st st...... 1 M 3 N 3. 3... O. epth 3.. epth 3. epth epth S. 3. 41. 4 1.. 4.. W 3 41. C CQS CQ M bove auto switch: -3/ Refer to p..3-4 for auto switch mounting position and mounting height. C1.. X 3. 3.. H1 M X 1. M X 1. M1 X 1. 1 st st st 33. 33. 3. 3. 43. 3. Standard st st st st st st.... 3 44. 43 4... C 1 Standard With auto switch CQP SCQP, #3 CQP SCQP, #3 dd to #4 to CQP SCQP, #3 CQP SCQP, #3 E 4 4 F.. H M X 1. M X 1. M X 1. I J. K 1 st st 1 1 1 st M 34 N... Standard With auto switch CQP SCQP, #3 CQP SCQP, #3 dd to #4 to CQP SCQP, #3 O epth epth epth P Rc(PT)1/ Rc(PT)1/ Rc(PT)1/4 Q S 4. 1 31. 3 41 W. Z 3 Refer to p..3-1 for rod end nut and optional bracket..3-

Compact Cylinder/arge Size: ouble cting Single Rod Series CQ ø, ø1, ø How to Order Standard CQ C With auto switch CQ C 3 S With auto switch (uilt-in magnet) Mounting Standard (Through-hole and both ends tapped) uto switch Without auto switch (uilt-in magnet) Refer to table below for selection of auto switch model no. Number of auto switches S n 1 n 1 size mm 1mm mm Cushion C Rubber bumper ody option M Standard (Rod end female thread) Cylinder stroke Refer to standard stroke table on p..3-1 ction ouble acting pplicable uto Switches/Refer to p..3- for further information on auto switch. Style Reed switch Solid state switch Special function iagnostic ( color) iagnostic ( color) Yes Grommet Yes Connector No Grommet Yes Grommet Connector Water resistance ( color) Grommet With timer iagnostic output ( color) atch with diagnostic output ( color) Electrical entry Indicator No Wiring (Output) 3 wire (Equiv.NPN) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 3 wire (PNP) Yes wire 3 wire (NPN) 4 wire (NPN) 4V 4V oad voltage C C Perpendicular In-line V V V, V V or less V V, V 4V or less V, V V V, V V V, V ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switch marked with a "" are manufactured upon receipt of order. V V uto switch model 3 3C C W FNV FPV FV JC FNWV FWV H H 3H H F FP J FW FPW JW F FNT FF FF ead wire (m) 3 () (Z). () None (N) pplicable load Relay, PC Relay, PC.3-

Compact Cylinder/arge Size: ouble cting Single Rod Series CQ Style size 1 Mounting Through-hole, oth ends tapped Pneumatic uilt-in magnet Piping Screw-in Rubber bumper (Standard) Rc(PT)3/ Rc(PT)3/ Rc(PT)3/ Specifications Style Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Cushion Rod end thread Rod end thread tolerance Stroke length tolerance Mounting Piston speed Pneumatic (Non-lube) ir 1.MPa 1.MPa.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) Rubber bumper (Standard) Female thread JIS class +1.4 Though-hole and both ends tapped to mm/s JIS symbol ouble acing: Single rod Standard Stroke size, 1, Standard stroke,,,,,,,, 1, 1,,, Intermediate stroke Intermediate strokes at mm intervals are available by using spacers with standard stroke cylinders. Example) CQ-C: Standard stroke cylinder CQ-1C with 1mm width spacer inside. Theoretical Force size 1 Weight Operating direction IN OT IN OT IN OT.3 33 31 43 41 4 31 OT IN nit: N Operating pressure (MPa).. 1 44 14 3 14 C CQS CQ M Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. Without auto switch size.4.4. 1.4....31. uilt-in magnet..3.3...3 Cylinder stroke.1.4..1.1.1.4.1. 1... 1....41.1 1. nit: kg.1.1.4 1. 1. 1.3 nit: kg Caution Snap Ring Installation/Removal size.4... Cylinder stroke..3.. 1.1 1..4.. q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). 1..4..3.1..4...4.4.3.4...1.3..4.. 1..1 1. 1. 1.4 w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. CQ arge bore size/minimum Strokes for uto Switch Mounting Number of auto switches 1 pc. pcs. -FV -JC -F -J -/- -3C/-C -H -H -FWV -FW/-JW -F -FNT/-FF 1 -W 1 nit: mm.3-1

Series CQ Option Weights nit: kg size 1 Male thread.31.31.4 Nut... Calculation example: CQ-CM asic weight: CQ-C.kg dd the weight of auto switches and mounting brackets. dditional weight:.4kg.3kg Weight/uto Switch Mounting racket Part No. Q- size ø to ø Weight (g) 1. Refer to p..3- for auto switch specifications Construction ouble acting/single rod Mounting olt for CQ Special bolt for through-hole of CQ is available as option. How to Order: Specify the required bolts. Example) olt M X l 4 pcs. Note 1) To install a through hole type mounting bolt, make sure to use the flat washer that is provided. Note ) Consult SMC regarding mounting bolts for strokes that exceed mm. se the O screw provided on the cylinder tube to secure the cylinder. Model C CQ, 1-C -C -C -C -C -C -C 1 M X l X 1 l X l CQ-C -C -C. -C. 1 1 1 Mounting bolt Model C X 1 l X 1 l X l X 1 l -C -C -C Mounting bolt C 1 1 1 1 1 Mounting bolt M X 1 l X l X 1 l X 1 l X 1 l X 1 l X l Component Parts No. q w e r t y u i o!!1!!3!4 escription Cylinder tube Head cover Piston Piston rod Rod cover Snap sing umper ushing Wearing Magnet Rod end nut Piston seal Rod seal Tube gasket Material luminum alloy Casting steel luminum alloy casting Carbon steel Casting steel Carbon tool steel rethane ead bronze casting Resin Rolled steel NR NR NR Note Hard anodized Zinc chromated Chromated Hard chrome plated Zinc chromated Phosphate coating For only CQ Nickel plated Replacement Parts: Seal Kits size Kit No. Note 1 CQ-PS CQ1-PS CQ-PS set includes!,!3 and!4 Seal kits are sets consisting of items!,!3 and!4, which can be ordered using the kit number for each cylinder bore size. uto Switch Mounting racket Part No. size 1 Part No. Q- Note Switch mounting screw (M3 X. X l) Switch interface Switch mounting nut pplicable switch Reed switch Solid state switch -, -3C, C -H, H -W -F, J -FV -JC -FW, JW -FWV -F -FF, -FNT [Stainless steel mounting bolt set] The set of stainless steel mounting screws (with nut) described below is available and can be used depending on the operating environment. (The spacer for auto switches must be ordered separately, as they are not included.) : For -//F/J The stainless steel bolts described above are used when the -F type switch is shipped mounted on a cylinder. When the switches are shipped as individual parts, the set is included. Rod End Nut Material: Rolled steel size Part No. d H C NT- /1 M X 1. 1 4 3.1 44 NT- M3 X 1. 1. 3.3-

Compact Cylinder/arge Size: ouble cting Single Rod Series CQ size ø, ø1, ø Standard (Through-hole)/CQ The outer dimensions are the same with or without an auto switch. 1 1 C1 H1 1 X 1 1 1 4 4 4 M X 1. M X 1. M3 X 1. 4 4 4 1 bove switch: -3/ Refer to below for auto switch mounting position and mounting height. Standard stroke range,,,,,,, 1 1,,, 3 3 1 C 33 3 3 E 1 1 F 4. 4.. H M X. M X. M4 X 3 I 1 3 CQ SCQ, #1(#1+#3) CQ1 SCQ1, #1(#1+#3) CQ SCQ, #1(#1+#3) J K 3 1 M 1 4 N... O M X M X M X O 1. 1. 4. Q 4. 4.. R R 1.4 1.4 1. S 1 1 Note 1) ttached plain washer must be used for through-hole mounting. C CQS CQ M uto Switch Mounting Position (at Stroke End) and Mounting Height - - -H -FW -H -JW -F -FF -J -FNT -F -3C -C -JC -W -FWV -FV uto Switch Setting Position size 1 H, - H, -3C, C - -F, FV -JC, J.. 3. 33 33 3 -W 34 -FNT 3 3 4 -FW -JW -FF -FF -F -FWV 3 3 41 uto Switch Mounting Height - - -H, -H -F, -J, -FW -JW, -F -FF, -FNT 1-3C -C -FV -FWV 3. 1. 1. -JC -W. 3. 3.....3-3

Compact Cylinder/arge Size: ouble cting ouble Rod Series CQW ø, ø1, ø How to Order Standard CQW C With auto switch CQW C 3 S With auto switch (uilt-in magnet) Style W ouble rod Mounting Standard (Through-hole and both ends tapped) 1 size mm 1mm mm Cylinder stroke Refer to standard stroke table on p..3-. Cushion C Rubber bumper ction ouble acting uto switch Without auto switch (uilt-in magnet) Refer to table below for selection of auto switch model no. Number of auto switches S n 1 n ody option Standard (Rod end female thread) M pplicable uto Switches/Refer to p..3- for further information on auto switch. Style Reed switch Solid state switch Special function iagnostic ( color) iagnostic ( color) oad voltage uto switch model Electrical Wiring entry (Output) C C Perpendicular In-line Indicator Yes Grommet No Yes Connector No Grommet Yes Grommet Connector Water resistance ( color) Grommet With timer iagnostic output ( color) atch with diagnostic output ( color) 3 wire (Equiv. NPN) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 3 wire (PNP) Yes wire 3 wire (NPN) 4 wire (NPN) 4V 4V V V V, V V V, V V, V V V, V V V, V V V V 4V 3 3C C W FNV FPV FV JC FNWV FWV H H 3H H F FP J FW FPW JW F FNT FF FF ead wire (m). (Nil) 3 () (Z) None (N) pplicable load Relay, PC Relay, PC ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switches marked with a "" are manufactured upon receipt of order..3-4

Compact Cylinder/arge Size: ouble cting ouble Rod Series CQW Style Pneumatic size Mounting Through-hole, both ends tapped (Common) uilt-in magnet Piping Screw-in Rubber bumper (Standard) 1 Rc(PT)3/ Rc(PT)3/ Rc(PT)3/ Specifications Style Fluid Proof pressure Max. operating pressure Min. operating pressure mbient and fluid temperature Cushion Rod end thread Rod end thread tolerance Stroke length tolerance Mounting Piston speed Pneumatic (non-lube) ir 1.MPa 1.MPa.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) Rubber bumper (Standard) Female thread JIS class +1.4 Through-hole, both ends tapped (Common) to mm/s Standard Stroke size, 1, Standard stroke,,,,,,,, 1, 1,,, C Theoretical Force size 1.3 33 43 4 Operating pressure (MPa). 1 44. 14 nit: N CQS CQ M Precautions e sure to read before handling. Refer to p.-3 to -4 for Safety Instructions and common precautions. Caution Snap Ring Installation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Weight Without uto Switch size 1.1.3. uilt-in Magnet size 1...34.......34.43........4.. Cylinder stroke..1.4......1.3...1..33 Cylinder stroke...41..1.4... 1.41. 1. 1.4.3 1. 1... 1...4..4 1.1.1.1 1..1 1.3.. 1.. nit: kg 1. 1..4 nit: kg 1. 1.. Mounting q When removing a load, be sure to secure the wrench flats of the piston rod on the load side. w If this is done without securing the piston rod on the load side, be aware that the coupled (screw-in) portion of the piston rod could become loosened. CQ arge Size/Minimum strokes for auto switch mounting Number of auto switches 1 -FV -JC -F -J -, - -3C, -C -H -H -FWV -FW, -JW -F -FNT, -FF 1 -W 1 nit: mm.3-

Series CQW Option Weights nit: kg size 1 Male thread area... Nut... Calculation example: CQW-CM dd the weight of auto switches and asic weight: CQW-C.kg mounting brackets. dditional weight:.4kg.34kg Weight/uto Switch Mounting racket Part no. size Weight (g) Q- ø to ø 1. Refer to p..3- for auto switch specifications Construction ouble acting/ouble rod Mounting olt for CQ Special bolt for through-hole mounting of CQW is available as option. How to Order: Specify the required bolts. Example) olt M X l 4 pcs. Mounting bolt Note 1) To install a through hole type mounting bolt, make sure to use the flat washer that is provided. Note ) Consult SMC regarding mounting bolts C for strokes that exceed mm. se the O screw provided on the cylinder tube to secure the cylinder. Model C CQW, 1-C CQW, 1-C CQW, 1-C CQW, 1-C CQW, 1-C CQW, 1-C CQW, 1-C 1 M X l M X 1 l M X l CQW-C CQW-C CQW-C. CQW-C. 1 1 1 Mounting bolt Model C M X 1 l M X 1 l M X l M X 1 l CQW-C CQW-C CQW-C 1 1 1 1 1 Mounting bolt M X 1 l M X l M X 1 l M X 1 l M X 1 l M X 1 l M X l Component Parts No. q w e r t y u i o!!1!!3!4 escription Cylinder tube Piston Piston rod Piston rod Rod cover Snap ring umper ushing Magnet Rod end nut Piston seal Rod seal Tube gasket Piston gasket Material luminum alloy luminum alloy casting Carbon steel Carbon steel Casting Carbon tool steel Resin ead bronze casting Rolled steel NR NR NR NR uto Switch Mounting racket Part No. size 1.3- Part No. Q- Note Switch mounting screw (M3 X. X l) Switch interface Switch mounting nut Note Hard anodized Chromated Hard chrome plated Hard chrome plated Zinc chromated Phosphate coating For only CQ Nickel plated pplicable switch Reed switch Solid state switch -, -3C, C -H, H -W Replacement Parts: Seal Kits size Kit No. Note 1 CQW-PS CQW1-PS CQW-PS set includes!1,! and!3. Seal kits are sets consisting of items!1,! and!3, which can be ordered using the order number for each cylinder bore size. -F, J -FV -JC -FW, JW -FWV -F -FF, -FNT Stainless steel mounting bolt set The set of stainless steel mounting screws (with nut) described below is available and can be used depending on the operating environment. (The spacer for auto switches must be ordered separately, as they are not included.) : For -//F/J The stainless steel bolts described above are used when the -F switch is shipped mounted on a cylinder. When the switches are shipped as individual parts, the set is included. Rod End Nut H d Material: Rolled steel size No. d H C NT- /1 M X 1. 1 4 3.1 44 NT- M3 X 1. 1. 3 C

Compact Cylinder/arge Size: ouble cting ouble Rod Series CQW ø, ø1, ø Standard (Through-hole)/CQW The dimensions are the same with or without an auto switch. 1 bove auto switch: -3/ Refer to below for auto switch setting position and mounting height. Standard stroke range,,,,,,, 1 1,,, 3 3 1 C () (.) (.) 33(.) E 1 1 Note 1) ttached plain washer must be used for through-hole mounting. Note ) The values in parentheses indicate the effective length of one side, only for the stroke type. H M X. M X. M4 X 3 I 1 3 CQW SCQ, # (#+#3) CQW1 SCQ1, # (#+#3) CQW SCQ, # (#+#3) uto Switch Mounting Position (at Stroke End) and Mounting Height 3 3 J K 3 1 M 1 4 N... O M X M X M X 1 O 1. 1. 4. 1 1 1 1 Q 4. 4.. C1 4 4 4 R R 1.4 1.4 1. H1 1 X M X 1. M X 1. M3 X 1. S 1 1 4 4 4 C CQS CQ M - - -H -FW -H -JW -F -FF -J -FNT -F -3C -C -JC -W -FWV -FV uto Switch Mounting Position size 1 - -.. 3. -FW H, -JW H, -3C, C -F, FV -W -FNT -FF, -FF -F -JC, J -FWV 33 33 3 34 3 3 4 3 3 41 uto Switch Mounting Height - - -H, -H -F, -J, -FW -JW, -F -FF, -FNT 1-3C -C -FV -FWV 3. 1. 1. -JC. 3. 3. -W....3-

Compact Cylinder/ong Stroke: ouble cting Single Rod Series CQ ø, ø, ø, ø, ø, ø How to Order Standard CQ C With auto switch CQ C 3 S F G With auto switch (uilt-in magnet) Mounting oth ends tapped Foot Front flange Rear flange ouble clevis Mounting brackets are shipped not assembled with the cylinder. size mm mm mm mm mm mm Cushion C Rubber bumper uto switch Without auto switch (uilt-in magnet) Refer to table below for selection of auto switch model no. Number of auto switches S 1 n n ody option Standard (Rod end female thread) M Cylinder stroke Refer to standard stroke table on p..3- ction ouble acting Mounting racket Part No. Foot (1) CQ- CQ- CQ- CQ- CQ- CQ- Flange CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F ouble clevis (3) CQ- CQ- CQ- CQ- CQ- CQ- Note 1) When ordering foot brackets, pcs. should be ordered for eacg cylinder. Note ) Parts attached with each brackets are as follows. Foot, Flange/ody mounting bolt ouble clevis/clevis pin, ody mounting bolt, C shape snap ring for axis Note 3) clevis pin and snap ring are packed with the double clevis..3- pplicable uto switch/refer to p..3- for further information on auto switch. Style Reed switch Solid state switch Special function Grommet Water resistant ( color) With timer With diagnostic output ( color) atch with diagnostic output ( color) 3 wire (Equiv. NPN) Grommet Yes No wire 4V V, V V Yes V Connector No iagnostic ( color) Grommet Yes V, V 4V iagnostic ( color) Electrical entry Grommet Connector Indicator Yes Wiring (output) 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 3 wire (PNP) wire 3 wire (NPN) 3 wire (NPN) oad voltage V V V, V V V, V V 4V V, V V V, V V V, V V V Rail mounting C C Perp. In-line Perp. In-line 3 3C C W FNV FPV FV JC FNWV FWV H H 3H H F FP J FW FPW JW F FNT FF FF ead wire length.m (Example) C m Z (Example) CZ 3m (Example) C None N (Example) CN Solid state switches marked with a " " are produced upon receipt of order. irect mounting V 3V V FNV FPV FV FNWV 3 FN FP F FNW FPWV FPW FWV FW F ead wire (m). () 3 () None (Z) (N) pplicable load Relay, PC Relay, PC

Compact Cylinder/ong Stroke: ouble cting Single Rod Series CQ Style size Pneumatic uilt-in magnet Piping Screw-in style Rc(PT)1/ Rc(PT)1/ Rc(PT)1/4 Rc(PT)1/4 Rc(PT)3/ Rc(PT)3/ Specifications JIS Symbol ouble acting single rod Style Fluid Proof pressure Max. operating pressure mbient and fluid temperature ubrication Cushion Rod end thread Rod end thread tolerance Stroke length tolerance Mounting Piston speed Pneumatic (non-lube) ir 1.MPa 1.MPa Without auto switch C to C (No freezing) With auto switch C to C (No freezing) Not required Rubber bumper (Standard equipment) Female thread JIS class +1.4 oth ends tapped to mm/s Minimum Operating Pressure nit: MPa size Min. operating pressure...... C CQS llowable Kinetic Energy size Kinetic energy.43...1...1 1.4.1 nit: J 4.4 CQ M Standard Stroke nit: mm size,,,,, Standard stroke, 1, 1,,, Precautions e sure to read before handling. Refer to p..3 to -4 through for Safety Instructions and common precautions. Caution Snap Ring Installation/Removal q For installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). w Exercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Intermediate Strokes (except standard strokes) Method Model No. Method Stroke range Example Spacer is attached on standard stroke body. Refer to How to Order for standard model no. Intermediate strokes at mm intervals are available by using spacers with standard stroke cylinders. size Stroke range to to Model no. : CQ-C CQ-1C with mm width spacer. dimension is.mm. Specify "X" at the end of standard model number. Intermediate strokes at 1mm intervals are available by using special body with required stroke. size Exclusive body Stroke range to 1 to Model no. : CQ-C-X Makes stroke tube. dimension is.mm. To order a spacer installed styles with intermediate strokes at 1mm intervals, consult SMC beforehand..3-

Series CQ Copper Free CQ size Stroke C(M) Copper Free Series ø, ø, ø, ø, ø, ø To eliminate influences of copper ions or halogen ions during CRT manufacturing processes, copper and fluorine materials are not used as component parts. Specifications Style size Proof pressure Max. operating pressure Rubber bumper Piping Piston speed Mounting uto switch ouble acting single rod ø, ø, ø, ø, ø, ø 1.MPa 1.MPa With (standard equipment) Screw-in piping to mm/s oth ends tapped Mountable llowable ateral oad at Rod End llowable lateral load W (N) ø ø ø ø ø ø W 1 Stroke ST (Mounting orientation : ateral) 1N.kgf Theoretical Force size Operating direction IN OT IN OT IN OT Operating pressure (MPa).3.. 41 31 3 4 4 3 1 size Operating direction IN OT IN OT IN OT nit: N Operating pressure (MPa).3.. 41 1 3 1 1 31 1 3 1 3 3 Weight nit: g Without uto Switch size 4 4 1 4 1 1 34 34 Cylinder stroke 1 1 43 33 4 3 1 41 4 1 3 44 uilt-in Magnet size. 3. 3. 34 44 1. 4. 41. 34 4 Cylinder stroke 1 4 3... 31. 1. 41. 4. 3. 4. 4. 3. 1. 4 Option Weights size Male thread Nut Foot (including mounting bolt) Front flange (including mounting bolt) Rear flange (including mounting bolt) ouble clevis (including pin, snap ring, bolt) 1 1 1 1 1 1 3 3 34 34 33 3 3 34 34 4 4 1 1 1 nit: g 1 1 1 1 1 Calculation example: CQ-CM asic weight: CQ-C g dditional weight: 43g ouble clevis g 4g Weight/uto Switch Mounting racket Part No. size Weight (g) Q- ø to ø 1. Refer to p..3- for auto switch weight. dd the weight of auto switches and mounting brackets when auto switches are mounted..3-1

Compact Cylinder/ong Stroke: ouble cting Single Rod Series CQ Construction C CQS Component Parts No. q w e r t y u i o!!1!!3!4! escription Cylinder tube Piston Piston rod Collar ase plate Snap ring amper amper ushing Wearing Rod end nut Magnet Rod seal Piston seal Tube gasket Material luminum alloy luminum alloy casting Carbon steel luminum alloy luminum alloy Carbon tool steel rethane rethane ead bronze casting Resin Rolled steel NR NR NR Note Hard anodized Chromated Hard chrome plated nodized nodized Phosphate coating Nickel plated For only CQ Replacement Parts: Seal Kits size Kit no. Contents CQ--PS CQ--PS CQ--PS CQ--PS set includes!3,!4 and!. CQ--PS CQ--PS Seal kits are sets consisting of items!3,!4 and!, which can be ordered using the kit number for each cylinder bore size. CQ M.3-1

Series CQ ø to ø Series CQ The dimensions are the same with or without an auto switch. oth ends tapped bove switch: -3/ Refer to p..3-1 for auto switch mounting position and mounting height. C1.. H1 M X 1. M X 1. M1 X 1. 1 3. 3. 43. X 3. 3.. oth ends tapped Stroke range C E H I J K M O P Q R S Th Z to (1). 4. 4 M X 1. 4. 1 34 M X 1. Rc(PT)1/.. 31., M X 1. 1 M X 1. Rc(PT)1/ 3 3.. 1 4 M X 1. 1 1 M X 1. Rc(PT)1/4 3 41 1 Note 1) ll the to mm stroke types are in mm increments. Note ) Refer to p..3-3 for calculation of cylinder length with intermediate stroke.... Foot/CQ Foot 1 G H S T X Y Z X Y. 4. 1 3.. 4. 3. 1... 1 3.. 4 33 3 3. 4 4. 1.. 1 43. 3. 3.. Refer to p..3-1 for rod end nut and optional bracket. oth ends tapped SCQ size, #1 (#1+#+#) Foot SCQ size, # (#+#+#).3-1

Compact Cylinder/ong Stroke: ouble cting Single Rod Series CQ Front flange F FT FV FX FZ. 4.. 4. 4 3... 1 1 1 1 M 3. 3. 43. 34 Rear flange.. imensions except are same as front flange type. C CQS CQ M ouble clevis C C CT C. 4.. 4 4.. 1. CW CX CZ 1 3 1 3 44 1 N RR 1 1 1 3. 3. 43. M X 1. M X 1. M X 1. Refer to p..3-1 for rod end nut and optional bracket. clevis pin and snap ring are packed with the double clevis type..3-1

Series CQ ø to ø Series CQ The dimensions are the same with or without an auto switch. bove auto switch: -3/ Refer to p..3-1 for auto switch mounting position and mounting height. C1.. H1 M1 X 1. M X 1. M X 1. 1 43. 3. 3. X. 3. 3. oth ends tapped Stroke range to (1), C E H I J K M O P Q R S Th Z 1 M X 1. 3 1 1 M X 1. Rc(PT)1/4. 1 3 3. 4. 1 1 M X. 1 M X 1. Rc(PT)3/ 1 1. 43.... M X. 1. 4 M X 1. Rc(PT)3/ 3 1...4 Note 1) ll the to mm stroke types are in mm increments. Refer to p..3-3 for calculation of cylinder length with intermediate stroke. Foot/CQ Foot 1 G H S T X Y 3.. 1 43. 3. 4 31 3 3. 4. 1. 1 1.. 3. 1 41. Refer to p..3-1 for rod end nut and optional bracket. Z 1 1 X Y. 1. 3. oth ends tapped SCQ size, #1 (#1+#+#) Foot SCQ size, # (#+#+#).3-1

Compact Cylinder/ong Stroke: ouble cting Single Rod Series CQ Front flange/cqf Front flange F FT FV FX FZ 1 4.. 1 1 M 43. 3. 3. 4 Rear flange/cqg Rear flange 4. imensions except are same as front flange type. C CQS CQ M ouble clevis/cq ouble clevis C C CT C 4.. 1 4. CW 3 4 CX CZ 44 4 1 N RR 1 43. 3. 3. M X 1. M X 1. M X 1. 1 Refer to p..3-1 for rod end nut and optional bracket. clevis pin and snap ring are packed with the double clevis. Front flange SCQ size, #3 (#3+#+#) Rear flange SCQ size, #4 (#4+#+#) ouble clevis SCQ size, # (#+#+#).3-

Series CQ uto Switch Specifications Refer to p..3- for of auto switch specifications. Standard Specifications Fluid ir mbient and C to C (No freezing) fluid temperature Other specifications are same as one on p..3-. uto Switch Mounting Position (at Stroke End) and Mounting Height How to Order Refer to p..3- for "How to Order" with auto switch. uto Switch Mounting Position uto Switch Mounting Height size,,,. 1. 1 1..... 1. 3.. 4. 1 1... 1. 4. 4.. 1. 1.. 3.. 3 1. 4... 1... 31. 1 1 3 1.. 1. 34. 1. 33. 1. 3 3. 1 3. 4 4. 1. 3. 41 1. uto Switch Mounting racket Part No. size - - - H -H -3C -C -F -J -F V -JC Part No. Q- -F W -F -W -F F - -F -JW - V -F V -F WV Note Switch mounting screw (M3 X. X l) Switch interface Switch mounting nut -F W -F WV -F pplicable switch Reed switch Solid state switch -, -3C, C - H, H -W -F, J -F V -JC -F W, JW -F WV -F -F F, -FNT - - 31. 3 41 4... -H -H -F -J -FW -JW -F -FF -FNT. 3 4 4... -3C -FV -C -FWV 3. 4 4 4. 4. 4. 3 3. 44. 1 1 1 -JC -FV -FV -W -V -FWV -F 3 41. 4. 4 4 4 34 3. 43.. 3.. 3. 4. 3 3. 4.. Mounting screw set made by stainless steel Following stainless steel mounting screw set (included nut) is provided. se them with accordance in environment. (uto switch interface is not included. Order it separately.) : For -//F/J When -F mounted on cylinder is required, the stainless steel screw mentioned above is used at shipping. When auto switch unit is shipped, is attached..3-1

Compact Cylinder/nti-lateral oad Series CQ ø, ø, ø, ø, ø, ø How to Order Standard CQ S C With auto switch CQ S C 3 S F G With auto switch (uilt-in magnet) Mounting Through-hole (Standard) oth ends tapped Foot Front flange S Rear flange ouble clevis Mounting brackets are shipped not assembled with the cylinder. size mm mm mm mm mm mm Mounting racket Part No. Foot (1) Flange ouble clevis CQ- CQ- CQ- CQ- CQ- CQ-.3- CQ-F CQ-F CQ-F CQ-F CQ-F CQ-F CQ- CQ- CQ- CQ- CQ- CQ- Note 1) When ordering foot brackets, pcs. should be ordered for each cylinder. Note ) Parts attached with each brackets are as follows. Foot, Flange/ody mounting bolt ouble clevis/clevis pin, C shape snap ring for axis, ody mounting bolt Style nti-lateral load Cylinder stroke Refer to standard stroke table on p..3-. Water resistant ( color) With timer iagnostic output ( color) atch with diagnostic output ( color) Cushion C Rubber bumper ction ouble acting 4 wire (NPN) uto switch Without auto switch (uilt-in magnet) Refer to table below for auto switch model no. selection. pplicable uto Switches/Refer to p..3- for further information on auto switch. oad voltage Rail mounting irect mounting Style Special function Electrical Wiring entry (Output) C C Perp. In-line Perp. In-line 3 wire (Equiv.NPN) V H V Yes V H Grommet 3 3H V V 3V 3 No wire 4V V, V v H V Yes V 3C Connector No V, V 4v C iagnostic ( color) Grommet Yes W 3 wire V, V FNV F (NPN) V FNV FN Grommet 3 wire V, V FPV FP (PNP) FPV FP FV J V wire FV F Connector JC Yes 3 wire 4V V, V FNWV FW (NPN) V FNWV FNW iagnostic 3 wire ( color) V, V FPW (PNP) FPWV FPW Grommet wire V FWV JW FWV FW F F 3 wire (NPN) FNT V, V FF Reed switch Solid state switch Indicator FF ead wire length.m (Example) OC m Z (Example) OCZ 3m (Example) OC None N (Example) OCN Solid state switches marked with a "O" are manufactured produced upon receipt of order. Number of auto switches S n 1 n ody option Standard (Rod end female thread) M ead wire (m). () 3 () None (Z) (N) pplicable load Relay, PC Relay, PC

Compact Cylinder/nti-lateral oad Series CQ JIS symbol ouble acting/single rod Precautions e sure to read before handling. Refer to p.-3 to -4 Safety Instructions and common precautions. Caution Snap Ring Installation/Removal qfor installation and removal, use an appropriate pair of pliers (tool for installing a C snap ring). wexercise caution even when using an appropriate pair of pliers (tool for installing a C snap ring), because of the possibility of the snap ring becoming detached from the tip of the pliers (tool for installing a C snap ring) and flying away, which could injure humans or damage the peripheral equipment. fter installing the snap ring, make sure that it is placed securely in the ring groove before supplying air. Style size Mounting Through-hole (standard) oth ends tapped uilt-in magnet Screw-in piping Rc(PT)1/ Rc(PT)1/ Rc(PT)1/4 Rc(PT)1/4 Rc(PT)3/ Rc(PT)3/ With rubber bumper (Standard) Pneumatic Specifications Style Fluid Proof pressure Max. operating pressure mbient and fluid temperature Rubber bumper Rod end thread Rod end thread tolerance Stroke length tolerance Mounting Piston speed Minimum Operating Pressure size Pneumatic (non-lube) Standard Stroke size,,,, Theoretical Force size IN OT IN OT IN OT IN OT IN OT IN OT. llowable Kinetic Energy size Kinetic energy Switch mounting screw (M3 X. X l) Switch interface Switch mounting nut Pneumatic (non-lube) type ir 1.MPa 1.MPa Without auto switch: C to C (No freezing) With auto switch: C to C (No freezing) Standard equipment Female thread JIS class +.1 Through-hole to mm/s nit: MPa..... Standard stroke,, 1,,,, 3,, 4,,,, 1,,,, 3,, 4,,, uto Switch Mounting racket Part No. size // // Operating direction.43 Part No. Q-.. Note.3 41 31 3 4 41 3 1 1 3.1. OT Operating pressure(mpa). 1 3..1 -, -3C, C -H, H -W 1.4 pplicable switch Reed switch IN. 4 3 1 1 1 31 3.1 nit: mm nit: N nit: J 4.4 Solid state switch -F, J -FV -JC -FW, JW -FWV -F -FF C CQS CQ M.3-

Series CQ Rod End llowable oad Without auto switch With auto switch ø llowable lateral load W (N) ø ø ø ø ø ø llowable lateral load W (N) ø ø ø ø ø Stroke St Stroke St Weight size nit: g Cylinder stroke 1 3 4 4 3 4 1 43 1 13 4 3 4 1 1 44 3 4 33 4 3 3 1 4 1 3 3 1 3 4 4 4 4 14 333 3 33 Option Weights size oth ends tapped Male thread Nut Foot (including mounting bolt) Front flange (including mounting bolt) Rear flange (including mounting bolt) ouble clevis (including pin, snap ring, bolt) 1 3 1 1 1 1 1 3 43 33 34 33 1 3 4 34 4 4 4 1 1 nit: g 4 1 1 1 1 Calculations Standard Calculation example: CQS-CM asic weight : CQS-C 4g dditional weight: oth end tapped g 43g ouble clevis g 4g.3-

Compact Cylinder/nti-lateral oad Series CQ Construction Component Parts No. q w e r t y u i o!!1!!3 escription Cylinder tube Piston Piston rod Collar Snap ring umper umper ushing Wearing Rod end nut Rod seal Piston seal Tube gasket Material luminum alloy luminum alloy Carbon steel luminum alloy Carbon tool steel rethane rethane ead bronze casting Resin Carbon steel NR NR NR Note Hard anodized Chromated Hard chrome plated nodized Phosphate coating Nickel plated Replacement Parts: Seal Kits size Kit No. Contents CQ-PS CQ-PS CQ-PS CQ-PS set includes!1,! and!3 CQ-PS CQ-PS Seal kits are sets consisting of items!1,! and!3, which can be ordered using the kit number for each cylinder bore size. C CQS CQ M.3-1

Series CQ uto Switch Specifications Refer to p..3- for auto switch specifications. Standard specifications Style Pneumatic (non-lube) Fluid ir mbient and to C (No freezing) fluid temperature Other specifications are same as one on p..3-. How to Order Refer to p..3- for How to Order with auto switch. Weight nit: g Option Weights nit: g 1 Cylinder stroke 3 4 size oth ends tapped 1 4 4 1 43 4 34 3 3 43 Rod end 3 3 1 3 1 34 4 33 4 43 4 3 4 1 4 1 Male thread Nut 1 1 3 3 4 1 1 4 3 34 Front flange (included mounting bolt) 3 1 43 4 1 3 14 1 Rear flange (included mounting bolt) 1 34 34 1 1 4 333 44 34 3 ouble clevis (included pin, snap ring, bolt) 1 33 4 1 1 With auto switch Calculation example: CQS-CM asic weight: CQS-C g dditional weight: oth ends tapped g 43g ouble clevis g 4g dd the weight of auto switches and mounting brackets when auto switches are mounted. Weight/uto Switch Mounting racket Mounting bracket Cylinder bore size Weight(g) Q- ø to ø 1. Refer to p..3- for auto switch weight. Construction Component Parts No. escription q Cylinder tube w Piston e Piston rod r Collar t Snap ring y umper u umper i ushing o Wearing! Magnet!1 Rod end nut! Rod seal!3 Piston seal!4 Tube gasket Material luminum alloy luminum alloy Carbon steel luminum alloy luminum alloy rethane rethane ead bronze casting Resin Carbon steel NR NR NR Note Hard anodized Chromated Hard chrome plated nodized Phosphate coating Replacement Parts: Seal Kits size Kit No. Contents CQS-PS CQS-PS CQS-PS CQS-PS set includes!,!3 and!4. CQS-PS CQS-PS Seal kits are sets consisting of items!,!3 and!4, which can be ordered using the kit number for each cylinder bore size..3-

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback