Magnetic Paddle Flow Sensor/Switch for Easy On/Off Control INLINE Quarter-Turn ON/OFF Control System for Monitoring and Switching Mechanical adjustment of set point No contact to Fluid thanks to INLINE Quarterturn Technique This mechanical single paddle Sensor/Switch is specially designed for monitoring minimum/maximum values of flow. The switching point can be set by turning a spring screw. The switching is done by a moving magnet and a reed contact. The connection to the process in the piping is done with the easy to connect quarter-turn technique of the INLINE fittings. Process Specification Pipe diameter DN 5 DN Switching range see table Fitting Bürkert INLINE fitting S Housing material PC+% glass fiber Sensor element reed contact on single paddle Monitoring - Min./Max. values Electrical Specification Reed contact output: Max. switching voltage Max. switching current Max switching power Recommended max. cable length 3 VDC, VAC A W m shielded, section.4...5 mm Alarm Valve Electrical Connections Optional EaseOn cable plug Cable plug 3 wire, plug in-turn off DIN 436A Environment Specifications Fluid temperature max. 55 C Ambient temperature max. +55 C Fluid pressure max. PVC, PP, PVDF: PN Metal fitting: PN6 Type of protection IP 65 with connector pluged in Standards EMI EN 8-, 8-, - Fluid Control Systems
Magnetic Paddle Flow Sensor/Switch for Easy On/Off Control Ordering table for SE (electronic SE and sensor fitting S build the ) ON/OFF Flow Control System, mechanical, magnetic paddle INLINE type Output Connector Item-No. read contact NO Connector cable plug DIN, PG9 438 87 L read contact NC Connector cable plug DIN, PG9 438 88 V Fittings with Magnetic Sensor Paddle - PVC, PVDF, PP, Stainless Steel or Brass (see datasheet fittings S) Dimensions Variable dimensions Magnetic paddle flow switch type Range Fitting Fluid velocity (water) Flow rate or DN (m/s) (l/mn) (m 3 /h) (mm) min max min max min max 5.65 ->.9 6.9 9.5.4.57 75 5. <-. 6.4 8.5.38.5 48.5.35 ->.55 6.6.4..6.5 <-.45 4.7 8.5.8.5 3.8 ->.8 8.5 3.5.5.8 3.5 <-. 7..5.4.63 3 5. ->..8 7.7.7.6 5.3 <-. 8.8 4.7.53.88.5 ->.45 8.8 33.9.3.4. <-.35 5. 6.4.9.58 3.65 ->.9 3.4 43.4.88.6 44 3.55 <-.7 6.5 33.8.59.3.49 ->.59 58. 7. 3.48 4. 54.36 <-.5 4...5 3..75 ->. 56.5 75.4 3.39 4.5. <-.9 45. 67.9.7 4.7 Electrical connection - Reed contact version Switching range table for fitting PVC, PVDF, PP, SS, Brass for DC switching use free wheeling diode to avoid sparking on the reed relay contact. SE reed contact D Load Z free wheeling diode Switching range Switching range 7 7 for switching of high capacitive loads (like lamps, long lines, )use a current limiting resistor. SE reed contact not connected + - see instruction manual /SE for more details R Load 3 Flow rate increases Flow rate decreases 3 Flow rate increases Flow rate decreases Reed contact Reed contact 3 not connected DN5 DN DN5 DN3 DN DN3 DN DN In case of special application requirements, please consult for advice. We reserve the right to make technical changes without notice. 9-GB/ -96
S BRASS, INLINE Quarter-Turn ON/OFF Control System for Monitoring and Switching in Combination with SE unit No Leakage due to Single Paddle inside the fitting (INLINE Quarter-Turn Technology) Contact Free Switching of Reed Contact by Magnetic Transmission The fitting S has the single paddle to detect the flow built in. This leads to a very leak proof construction, which we call the INLINE Quarter-Turn Technology. The switching point is transmitted contact free by a magnetic field. The detecting unit SE can be snapped-on or removed without opening the pipe of the process. The switching point can be set on the unit SE. Process Specifications Pipe diameter DN 5 up to DN to install Temperatures Ambient Storage Fluid up to +55 C up to +55 C up to +55 C Materials Seal FPM (standard) EPDM (on request) Fitting Brass Screws Stainless Steel (36L -.44) Pressure class PN6 Measuring range (see diagram) Paddle (range ) DN5.65 up to.9 m/s DN.35 up to.55 m/s DN5. up to. m/s DN3.65 up to.9 m/s DN.75 up to. m/s Paddle (range ) DN3. up to.3 m/s DN.5 up to.45 m/s DN. up to. m/s Burkert Quarter Turn Application: (together with SE) Monitoring - Min./Max. Values Alarm Valve Fluid Control Systems
Specifications - Ordering Chart (Other Versions on Request) Description Brass Fitting World Wide with internal threaded port connection with external threaded port connection Orifice DN 5.. 5. 3. 3.. 5.. 5. 3. 3.. Process Connection G / G G /4 G / G /4 G / G G G /4 G / M55 x G / M55 x M64 x Switching Range Item No. 438 63 U 438 64 V 438 65 W 438 66 X 438 67 Y 438 69 A 438 7 F 438 7 U 438 9 U 438 9 R 438 9 J 438 93 K 438 94 L 438 96 N 438 97 P 438 98 Y Brass Fitting ASEAN with internal threaded port connection 5.. 5. 3. 3.. Rc / Rc 3/4 Rc Rc /4 Rc / Rc /4 Rc / Rc 438 8 P 438 8 Q 438 83 R 438 84 J 438 85 K 438 87 M 438 88 W 438 89 X Brass Fitting NAFTA with internal threaded port connection 5.. 5. 3. 3.. NPT / NPT 3/4 NPT NPT /4 NPT / NPT /4 NPT / NPT 438 7 V 438 73 W 438 74 X 438 75 Y 438 76 Z 438 78 B 438 79 C 438 S
Dimensions for Fittings - Brass Fitting with internal threaded port connection Brass C DN 5 DN 5 L G G, Rc and NPT Fitting with external threaded port connection Brass B L G G Orifice DN Internal Threaded Port External Threaded Port Example of type with internal threaded port connection (S + SE) C G L B G L 5 5 5 5 5 5 3 3 3 85. 85. 85. 95. 95. 95. 5. 5. 5.... 3. 3. 3.... G / NPT / Rc / NPT 3/4 Rc 3/4 G NPT Rc G /4 NPT /4 Rc /4 G / NPT / Rc / G NPT Rc 6. 7. 5. 7. 8.3 6.3 3.5 8. 8. 3.5.. 3.5. 9. 7.5 4. 4. 84. 84. 84. 94. 94. 94. 4. 4. 4. 9. 9. 9. 9. 9. 9. 49. 49. 49. G G G G /4 G /4 G /4 G / G / G / M55 x M55 x M55 x M64 x M64 x M64 x.5.5.5 3.5 3.5 3.5 4. 4. 4. 8. 8. 8. 9. 9. 9....
Dimensions for Fittings with Magnetic Sensor Paddle - Brass Example: Fitting with weld ends and SE DN 5 screw for switching point adjustment Switching Range Table for Fitting Brass Switching Range 7 Switching Range 7 Orifice Dimensions DN F 5 5 3. 97. 97.. 5.. F = Center to Top DN 5 F 3 DN5 DN DN5 DN3 DN 3 DN3 DN DN Inner Materials of all Brass Fittings Fitting with internal threaded port connection. Body Brass. Paddle PVDF 3. Shaft Stainless Steel (36L -.44) 4. O-Ring FPM (EPDM on request) 3 4 N 5 In case of special application requirements, please consult for advice. We reserve the right to make technical changes without notice. -GB/ -9