USA - AIR TOOLS AIR POST DRIVERS. Rock Drilling & Mining Supplies

CROWDER SUPPLY Rock Drilling & Mining Supplies Gas Powered Breakers/Drills Jack Leg Drills Compressors Drill Steel Tools for: Breakers Hammers Rivet Busters Pipe Drivers And more CROWDER PNEUMATICS Chicago Pneumatic Authorized Distributor Pneumatic Construction & Demolition Tools CROWDER HYDRAULIC CROWDER AIR TOOLS Atlas Copco Authorized Distributor Hydraulic & Pneumatic Construction & Demolition Tools American Pneumatic Tools Authorized Distributor Pneumatic Construction & Demolition Tools AIR POST DRIVERS USA - AIR TOOLS Rhino Post Drivers Authorized Distributor MADE IN U.S.A. Pneumatic Post Drivers Post Pulls Compressor Kits Texas Pneumatic Tools Authorized Distributor MADE IN U.S.A. Jet Fans, Air Movers Construction Tools 08.09.2011

2 MINING AND CONSTRUCTION CONSUMABLES Crowder Supply Company Table of Contents Crowder Pneumatics Authorized Dealer of Chicago Pneumatic Tools and Parts Pneumatic Air Tools Authorized Dealer of American Pneumatic Tools and Parts Split Set Drivers 3 Paving Breakers 2 Rock Drills 2 Bolt Drivers Resin 5 Rivet Busters 5 Clay & Trench Diggers 3 Adapters Coupling, Bit Sleeve & Hole Saver 6 Sinker Drills 6 Paving Breakers 4 MAI & IBO Hollow Grout Rod & Swivels 7 Rock Drills 7 Rivet Busters 6 Tapered Drill Steel 8 Chipping Hammers 8 Chipping Hammers 7 Integral Drill Rod & Reaming Equipment 10 Pumps 11 Needle Scaler 8 H & D Thread Steel and Bits 11 Core Drills 12 Backfill Tamper 8 Rivet Buster Tools 13 Concrete Vibrator 12 Chipping Hammer Tools 14 Backfill Tamper 13 Air Post Drivers Authorized Dealer of Rhino Paving Breaker Tools 15 Scabbler 13 Tools and Parts Pipe Driving Tools 17 Picks & Clay Diggers 14 Carbide Tipped Whirlibits 18 Saw 15 Choosing a Driver 4 Threaded Steel & Bits Impact Wrenches 15 Post Drivers 7 1 Rope / R25 / 100 Rope 20 Red Hawk Gas Powered Tool 16 Accessories 9 1-1/4 Rope / R32 / 125 Rope 21 Crowder Hydraulics Kit Packages 10 Authorized Dealer of 1-1/2 Rope / R38 / 150 Rope 25 Atlas Copco Tools and Parts Post Pullers 12 T 38 22 Hydraulic Tools USA Air Tools Authorized Dealer of Texas Pneumatic T 45 21 Paving Breakers 2 Tools and Parts T 51 24 Power Pacs & Accessories 4 Jet Fans 2 Striking Bars & Shank Adapters 25 Post Drivers 5 Water Driven Fans & Swing Gates 3 Betonomit Expansive Cracking Agent 26 Post Puller 6 Air Ducting & Air Receiver Tanks 4 Scaling Bars 26 Post Hole Borer 6 Air Movers 5 Air Hose and Couplings 27 Pick Hammers 7 Air Misters 6 Rock Drill Oil, Thread Lube and Line Oilers 27 Rock Drills 7 Air Manifolds 7 Darda Rock Splitters 28 Cut Off Saw 8 ASME Air Manifold 8 Mid-Western Jack Leg Drills & Feed Legs 30 Core Drill 8 Foundry Tools Rammers & Tampers 9 Cobra Combi Gas Power Breakers/Drills 32 Pump 8 Paving Breakers & Clay Diggers 10 Pneumatic Tools Chipping Hammers 11 Paving Breakers 10 Rock Drills 13 Rock Drills 12 Rivet Busters 14 CROWDER SUPPLY COMPANY INC 8495 Roslyn Street Commerce City, Colorado 80022 Phone: 303-433-5144 Fax: 303-433-3928 Www.crowdersupply.com Stoper & Feed Leg Drills 14 Needle/Chisel Scaler, Long Reach Scaler 15 Pick Hammers 15 Piston Scaler 18 Chipping Hammers 16 Air Scribe 19 Rivet Busters 17 Retainers & Accessories 20 Pump 17 Filter-Regulator-Lubricator Systems 24 2 Backfill Tamper 18 Hose Whip Assemblies 29 Scaler 18 Hose Swivels & Couplings 31

MINING AND CONSTRUCTION CONSUMABLES 3 SPLIT SET DRIVERS 1-PIECE DRIVER SSD1PC 7/8 X 4-1/4-13"OAL $60.00 SSD1PC-B 7/8 X 4-1/4-13"OAL BULB NOSE 60.00 SSD1PC33 7/8 X 4-1/4-13"OAL 33MM NOSE 60.00 SSD1PC-88 1 X 4-1/4-13"OAL 65.00 SSD1PC-18 7/8 X 4-1/4-18"OAL 100.00 SSD1PC-24 7/8 X 4-1/4-24"OAL 125.00 SSD1PC-30 7/8 X 4-1/4-30"OAL 158.35 SSD1PC-30B 7/8 X 4-1/4-30"OAL BULB NOSE 158.35 SSD1PC-36 7/8 X 4-1/4-36"OAL 183.35 SSD7811 SSD781133 SSD7812 SSD781233 SSD8811 SSD8812 SSDR25F-B SSDR25S-F SSDR2533 SSDR32F-B SSDR32F-S SSDR3233 SSDR32F-10.7 SSDR32F-24 SSDR32F-30 SSDR32M-18 SSDR32F-S46 SPLIT SET DRIVER HEAD - TAPERED SOCKET 7/8 X 11 TAPER $54.15 7/8 X 11 TAPER, 33MM NOSE 54.15 7/8 X 12 TAPER 54.15 7/8 X 12 TAPER, 33MM NOSE 54.15 1 X 11 TAPER 60.00 1 X 12 TAPER 60.00 SPLIT SET DRIVER HEAD - THREADED R25 FEMALE BULB NOSE $79.20 R25 FEMALE, STANDARD NOSE 79.20 R25 FEMALE, 33MM NOSE 79.20 R32 FEMALE, BULB NOSE 79.20 R32 FEMALE, STANDARD NOSE 79.20 R32 FEMALE, 33MM NOSE 79.20 R32 FEMALE 12¼" OAL, 1½" NOSE 111.30 R32 FEMALE 24"OAL Call R32 FEMALE 30"OAL Call R32 MALE 18"OAL 4"STD NOSE Call R32 FEMALE 46MM NOSE 105.00 SSDR38M SSDR38F-10.7 SSDR38F-11.7 SSDR38F-13.7 SSDR38F-15.7 SSDR32F-20 SSDT38 SSDT38F-12.5 R38 MALE 8 ¼ OAL, 2 ¾ NOSE R38 FEMALE, 10 ¾ OAL, 1 ¾ NOSE R38 FEMALE, 11 ¾ OAL1 ¾ NOSE R38 FEMALE, 13 ¾ OAL1 ¾ NOSE R38 FEMALE, 15 ¾ OAL1 ¾ NOSE R38 FEMALE, 20 OAL, 2 ¾ NOSE T38 FEMALE T38MALE 12½"OAL - 1½" NOSE $120.85 116.70 116.67 141.67 233.33 175.00 105.00 133.35 3

4 MINING AND CONSTRUCTION CONSUMABLES SPLIT SET DRIVERS 1 x 6 1/4 SHANK DRIVERS SPECIAL SSD89-15 1 X 6¼" - 15"OAL, 2¼" NOSE $115.00 SSDT13 TAMROCK, SECOMA $435.40 SSD89-15.75 1 X 6 ¼" - 15 ¾ OAL, 2 ½ NOSE 115.00 SSD89-18 SSD89-18S 1 X 6 ¼" - 18"OAL, 2 ¾ NOSE 1 X 6 ¼" - 18"OAL, 4 STANDARD NOSE 120.00 120.00 SSD-JH4-20 JH4, 503MM LONG 200.00 SSD89-20 1 X 6¼" - 20"OAL, 2¾" NOSE Call SSD89-21.25 1 X 6 ¼" - 21 ¼ OAL, 2 ¾ NOSE 145.00 SSD89-21.5 SSD89-22 1 X 6¼" - 21½"OAL, 2¼" NOSE 1 X 6 ¼ - 22 OAL, 1 ½ NOSE (6.25-I) 145.00 160.00 Bolt spinners also available for Williams or Titan Rod SSD89-24 SSD89-30 1 X 6¼" - 24"OAL, 4" BULB NOSE 1 X 6 ¼ - 30 AOL, 4 STANDARD NOSE 175.00 220.00 WE BUILD DRIVERS TO YOUR SPECIFICATIONS SSD89-32 1 X 6 ¼ 32 AOL, 4 STANDARD NOSE 235.00 SSD89-40MC 1 X 6 ¼ 40 AOL, 4 BULLET NOSE 275.00 SSD89-42MC 1 X 6 ¼ 42 AOL, 4 BULLET NOSE 290.00 SPLIT SET See Specs on our Web Site SPLIT BOLTS 33MM 39MM 46MM Model SS-33 1.3" (33mm) Dia. Model SS-39 1.5" (39mm) Dia. Model SS-46 1.8" (46mm) Dia. 18" SS33-18 SS39-18 SS46-18 2' SS33-24 SS39-24 SS46-24 3' SS33-36 SS39-36 SS46-36 4' SS33-48 SS39-48 SS46-48 Also available in 4-1/4" shank length For threaded rather than oval socket add "T" to end of part # For 7/8 x 4-1/4 shank use NUT SPINNER Nut spinners are normally made to order. We need to know: 1. What is the drive end? Shank, Threaded, Square Impact Drive 2. What Size Nut you are Tightening? 3. How far down the bolt do you want to spin the nut, or the overall driver length? 5' SS33-60 SS39-60 SS46-60 6' SS33-72 SS39-72 SS46-72 8' SS33-96 SS39-96 SS46-96 10' SS33-120 SS39-120 SS46-120 12' SS33-144 SS39-144 SS46-144 PLATES SS-PLATE33 SS-PLATE39 SS-PLATE46 SPLIT BOLTS AVAILABLE GALVANIZED OTHER LENGTHS AVAILABLE Here are some samples of some common nut spinner we build: TT77-7-22 7/8 x 3-1/4" x 22" OAL, 1-1/8" SQ TT77-7-30 7/8 x 3-1/4" x 30" OAL, 1-1/8" SQ TT77-7-36 7/8 x 3-1/4" x 36" OAL, 1-1/8" SQ TT77-7-48 7/8 x 3-1/4" x 48" OAL, 1-1/8" SQ TT77-1625-22 7/8 x 3-1/4" x 22" OAL, 1-5/8" HEX TT89-7-25 1 X 6-1/4" X 25"OAL, 1-1/8" SQ TTR32F-7-16 DRIVER R32F X 16"OAL, 1-1/8" SQ TTR32F-8-21 DRIVER R32M X 21"OAL, 1-5/8" HEX TTR38F-8-13 DRIVER R38F x 13" OAL, 1-5/8" HEX $130.00 180.00 Call Call 130.00 130.00 130.00 Call Call 4

MINING AND CONSTRUCTION CONSUMABLES 5 Bolt Drivers - Resin DYWIDAG OVAL SOCKET SPINNER 7/8 X 3 1/4 1 x 3 1/4 R25 #6 DDY77-6-11 $120.00 DDY87-6-11 $120.00 DDYR25-6 #7 DDY77-7-11 120.00 DDY87-7-11 120.00 DDYR25-7 #8 DDY77-8-11 120.00 DDY87-8-11 120.00 DDYR25-8 #8 G150 DDY77-8HS-11 120.00 DDY87-8HS-11 120.00 DDYR25-8HS #9 DDY77-9-11 120.00 DDY87-9-11 120.00 DDYR25-9 #10 DDY77-10-11 130.00 DDY87-10-11 130.00 DDYR25-10 #11 DDY77-11-11 130.00 DDY87-11-11 130.00 DDYR25-11 1 1/4" G150 DDY77-11HS-11 130.00 DDY87-11HS-11 130.00 DDYR25-11HS $120.00 120.00 120.00 120.00 120.00 130.00 130.00 130.00 R32 R38 T38 T45 #6 DDYR25-6 $120.00 DDYR38-6 $120.00 DDYT38-6 $120.00 DDYT45-6 #7 DDYR32-7 120.00 DDYR38-7 120.00 DDYT38-7 120.00 DDYT45-7 #8 DDYR32-8 120.00 DDYR38-8 120.00 DDYT38-8 120.00 DDYT45-8 #8 G150 DDYR32-8HS 120.00 DDYR38-8HS 120.00 DDYT38-8HS 120.00 DDYT45-8HS #9 DDYR32-9 120.00 DDYR38-9 120.00 DDYT38-9 120.00 DDYT45-9 #10 DDYR32-10 130.00 DDYR38-10 130.00 DDYT38-10 130.00 DDYT45-10 #11 DDYR32-11 130.00 DDYR38-11 130.00 DDYT38-11 130.00 DDYT45-11 1 1/4" G150 DDYR32-11HS 130.00 DDYR38-11HS 130.00 DDYT38-11HS 130.00 DDYT45-11HS $120.00 120.00 120.00 120.00 120.00 130.00 130.00 130.00 WE CAN BUILD IT Don t see what you need? Call us at ROOF BOLT DRIVER 1 1/8" SQUARE SOCKET 7/8" FEMALE DOLLY RBD77-10 ROOF BOLT DR 7/8 X 3 1/4 X 10" OAL $105.00 7/8 Hex Socket to Press on Tapered Steel RBD77-27 ROOF BOLT DR 7/8 X 3 1/4 X 27" OAL 165.00 RBD77-48 ROOF BOLT DR 7/8 X 3 1/4 X 48" OAL 225.00 DDY78HF-7 7/8 HEX FEMALE X #7 OVAL SOCKET $95.00 RBD78HF 7/8HEX FEMALE X 1 1/8" SOCKET 65.00 DDY78HF-8 7/8 HEX FEMALE X #8 OVAL SOCKET 95.00 5

6 MINING AND CONSTRUCTION CONSUMABLES ADAPTERS COUPLING ADAPTERS CAR22-R25 R22/7/8 ROPE - R25/1 ROPE $75.00 CAR25-R28 R25/1 ROPE - R28/1-1/8 ROPE 75.00 CAR25-R32 R25/1" ROPE - R32/1-1/4" ROPE 80.50 CAR25-R38 R25/1" ROPE - R38/1-1/2" ROPE 81.90 CAR25-T38 R25/1 " ROPE - T 38" 81.90 CAR25-T45 R25/1" ROPE - T45 125.00 CAR28-R32 R28/1-1/8" ROPE - R32/1-1/4" ROPE 75.00 CAR32-R38 R32/1-1/4" ROPE - R38/1-1/2 ROPE 81.90 CAR32-R38SQ R32/1-1/4" ROPE - R38/1-1/2" ROPE W/ FLATS 110.00 CAR32-R51 R32/1-1/4" ROPE - R51/2 ROPE 180.00 CAR32-T38 R32/1-1/4" ROPE - T 38 81.90 CAR32-T38SQ R32/1-1/4" ROPE - T 38 W/FLATS 110.00 CAR32-T45 R32/1-1/4" ROPE - T45 115.00 CAR32-T51 1 1/4" ROPE - T51 181.30 CAR32-H55 R32/1-1/4" ROPE - H55 195.00 CAR38-R51 R38/1-1/2" ROPE - R51/ 2 ROPE 181.90 CAR38-T38 R38/1-1/2" ROPE - T 38 81.90 CAR38-T38SWF R38/1-1/2" ROPE - T 38 W/FLATS 97.50 CAR38-T45 1 1/2" ROPE - T 45 115.00 CAR38-H55 R38/1-1/2" ROPE - H55 225.00 CAT38-T45 T 38 - T 45 107.30 CAT38-T51 T 38 - T 51 181.90 CAT38-R51 T 38 - R51/ 2 ROPE 133.75 CAT38-H55 T 38 - H55 225.00 CAT45-R51 T 45 - R51/ 2 ROPE 181.90 CAT45-T51 T 45 T 51 181.10 CAT45-H55 T 45 - H55 225.00 CAT51-T76 T51 T76 192.60 BAH-D BAR22-R25 BAR25-R38 BIT ADAPTERS H THD (FM) - D THD (M) R22/7/8" ROPE (FM) - R25/1" ROPE (M) R25/1" ROPE (FM) - R38/1-1/2" R (M) BAR25-R32 R25/1" ROPE (FM) - R32/1-1/4" R ( M) BAR25-R28 BAR25-7811 BAR25-T38 BAR25-H BAR32-R28 R25/1" ROPE (FM) - R28/1-1/8" ROPE (M) R25/1" ROPE (M) - 7/8" 11º TAPER R25/1" ROPE (FM) - T 38 (M) R25/1" ROPE (FM) - H THD (M) R32/1-1/4" R (FM) - R28/1-1/8" R (M) BAR32-R25 R32/1-1/4" R (FM) - R25/1" ROPE ( M) BAR32-R38 BAR32-T38 BAR38-R32 BAR38-T38 BAR38-T45 R32/1-1/4" R (FM) - R38/1-1/2" R (M) R32/1-1/4" R (FM) - T 38 (M) R38/1-1/2" R (FM) - R32/1-1/4" R (M) R38/1-1/2" R (FM) - T 38 (M) R38/1-1/2" R (FM) - T 45 (M) BAR38-R51 R38/1-1/2" R (FM) - 2" ROPE M) BAT38-T45 BAT38-R32 BAR38-T45 BAT38-T51 BAT45-T51 BAT38M-R25M T 38 (FM) - R38/1-1/2" R (M) T 38 (FM) - R32/1-1/4" R (M) T 38 (FM) - T 45 (M) T38 (FM) - T 51 (M) T45 (FM) - T 51 (M) T38 (M) - R25/1" ROPE (M) DON T SEE WHAT YOU NEED NO WORRIES WE CAN BUILD IT Save Money Recover that expensive drill string Save that Hole! HOLE SAVER $41.20 60.00 60.00 60.00 60.00 36.25 75.00 65.00 75.00 75.00 80.89 75.60 75.60 95.00 105.00 115.00 95.00 95.00 105.00 105.00 125.00 85.00 SLEEVE ADAPTERS HSBR25 BELL HOLE SAVER R25/1 ROPE $150.00 BSR25-T38 R25/1 ROPE (FM) - T45 (M) $75.00 HSBR32 BELL HOLE SAVER R32/1-1/4 ROPE 164.00 BSR25-T45 R25/1 ROPE (FM) - T45 (M) Call HSBT38 BELL HOLE SAVER T 38 164.00 BSR25-T51 BSR32-T45 BSR32-T51 BSR38-T45 BSR38-T51 BST38-R51 BST38-T51 BST38-HL20 R25/1 ROPE (FM) - T45 (M) R32/1-1/4 ROPE (FM) - T45 (M) R32/1-1/4 ROPE (FM) - T51 (M) R38/1-1/2 ROPE (FM) - T45 (M) R38/1-1/2 ROPE (FM) - T51 (M) R38/1-1/2 ROPE (FM) - R51/2 ROPE (M) T 38 (FM) - T51 (M) T 38 (FM) - HL 2000 (M) Call 74.41 85.00 Call 75.00 75.00 75.00 85.00 HSBT45 BELL HOLE SAVER T 45 HSBT51 BELL HOLE SAVER T 51 HSSR25 SPEAR HOLE SAVER R25/1 ROPE HSSR32 SPEAR HOLE SAVER R32/1-1/4 ROPE HSST38 SPEAR HOLE SAVER T 38 HSST45 SPEAR HOLE SAVER T 45 HSST51 SPEAR HOLE SAVER T 51 219.00 225.00 150.00 164.00 219.00 219.00 225.00 6

MINING AND CONSTRUCTION CONSUMABLES MAI & IBO Hollow Grout Rod 7 MAI BITS Hardened Steel Soil Bits R32 R38 R51 2 IBOR32-BS51 $15.30 IBOR38-BS51 $15.30 2-½" IBOR32-BS64 17.70 IBOR38-BS64 17.70 3" IBOR32-BS76 19.15 IBOR38-BS76 19.15 IBOR51-BS76 $19.15 3-½" IBOR32-BS89 23.86 IBOR38-BS89 23.86 IBOR51-BS89 23.86 4" IBOR32-BS102 44.45 IBOR38-BS102 44.45 IBOR51-BS102 44.45 5" *non stock-made to order Titan 30 & 40 bit also available Carbide Rock Bits R32 R38 R51 T76 2 IBOR32-BC51 $26.50 2-½" IBOR32-BC64 45.75 IBOR38-BC64 $45.75 3" IBOR32-BC76 51.40 IBOR38-BC76 51.40 IBOR51-BC76 $51.40 3-½" IBOR32-BC89 58.57 IBOR38-BC89 58.57 IBOR51-BC89 58.57 4" IBOR32-BC102 67.85 IBOR38-BC102 67.85 IBOR51-BC102 67.85 IBOT76-BC102 5" IBOR32-BC127 121.50 IBOR38-BC127 121.50 IBO51-BC127 121.50 IBOT76-BC127 $67.85 121.50 SMALL GROUT SWIVELS (MALE TO MALE) GROUT SWIVEL COMPLETE FLUSHING COLLAR JUNCTION BAR SEALS R32-1¼" ROPE GSR32 $380.00 GSR32-FC $250.00 GSR32-JB $195.00 GSR32-S $13.50 R38-1½" ROPE GSR38 420.00 GSR38-FC 250.00 GSR38-JB 195.00 GSR38-S 13.50 T38 GST38 420.00 GST38-FC 250.00 GST38-JB 195.00 GST38-S 13.50 LARGE - GROUT SWIVELS (FEMALE-FEMALE) ROTOJEC SHANKS (JUNCTION BARS) RJ-T38-R32 ROTOJEC SHANK T38-R32 $ 425.00 RJ-T38-R38 ROTOJEC SHANK T38-R38 $ 425.00 RJ-T38-R51 ROTOJEC SHANK T38-R51 $ 425.00 RJ-T45-R32 ROTOJEC SHANK T45-R32 $ 425.00 RJ-T45-R38 ROTOJEC SHANK T45-R38 $ 425.00 RJ-T45-R51 ROTOJEC SHANK T45-R51 $ 425.00 RJ-T51-R32 ROTOJEC SHANK T51-R32 $ 425.00 RJ-T51-R38 ROTOJEC SHANK T51-R38 $ 425.00 RJ-T51-R51 ROTOJEC SHANK T51-R51 $ 425.00 RJ-T51-T76 ROTOJEC SHANK T51-T76 $ 650.00 RJ-H55-R32 ROTOJEC SHANK H55-R31 $ 425.00 RJ-H55-R38 ROTOJEC SHANK H55-R38 $ 425.00 RJ-H55-R51 ROTOJEC SHANK H55-R51 $ 425.00 RJ-T38-T76 ROTOJEC SHANK H55-T76 $ 650.00 GROUT BOTTLE Part # RJ-BODY $625.00 SEALS Part # RJ-SEALS/DL $22.50 each Anchors see our website, www.crowdersupply.com for PDF spec sheets 7

8 MINING AND CONSTRUCTION CONSUMABLES Tapered Drill Steel & Bits 7/8 x 11 TAPERED 1 x 11 7/8 x 12 TAPERED STEEL 7/8 X 3¼ 7/8 X 4¼ 1 X 4¼ 7/8 X 3¼ 7/8 X 4¼ 1' DS7711-12 $61.60 DS7811-12 $57.60 DS8811-12 $69.60 DS7712-12 $61.60 DS7812-12 $57.60 1'6 DS7711-18 61.60 DS7811-18 57.60 DS8811-18 69.60 DS7712-18 61.60 DS7812-18 57.60 2' DS7711-24 61.60 DS7811-24 57.60 DS8811-24 69.60 DS7712-24 61.60 DS7812-24 57.60 2'6 DS7711-30 64.60 DS7811-30 60.60 DS8811-30 78.83 DS7712-30 64.60 DS7812-30 60.60 3' DS7711-36 70.00 DS7811-36 66.00 DS8811-36 88.06 DS7712-36 70.00 DS7812-36 66.00 3'6 DS7711-42 74.50 DS7811-42 70.50 DS8811-42 97.30 DS7712-42 74.50 DS7812-42 70.50 4' DS7711-48 79.00 DS7811-48 75.00 DS8811-48 97.30 DS7712-48 79.00 DS7812-48 75.00 4'6 DS7711-54 83.70 DS7811-54 79.70 DS8811-54 103.20 DS7712-54 83.70 DS7812-54 79.70 5' DS7711-60 89.70 DS7811-60 85.70 DS8811-60 109.10 DS7712-60 89.70 DS7812-60 85.70 5'6 DS7711-66 95.70 DS7811-66 91.70 DS8811-66 115.00 DS7712-66 95.70 DS7812-66 91.70 6' DS7711-72 100.00 DS7811-72 96.00 DS8811-72 120.90 DS7712-72 100.00 DS7812-72 96.00 6'6 DS7711-78 104.40 DS7811-78 100.40 DS8811-78 127.20 DS7712-78 104.40 DS7812-78 100.40 7' DS7711-84 110.40 DS7811-84 106.40 DS8811-84 133.50 DS7712-84 110.40 DS7812-84 106.40 7'6 DS7711-90 114.90 DS7811-90 110.90 DS8811-90 139.80 DS7712-90 114.90 DS7812-90 110.90 8' DS7711-96 119.20 DS7811-96 115.20 DS8811-96 146.10 DS7712-96 119.20 DS7812-96 115.20 8'6 DS7711-102 125.10 DS7811-102 121.10 DS8811-102 154.40 DS7712-102 125.10 DS7812-102 121.10 9' DS7711-108 129.70 DS7811-108 125.70 DS8811-108 162.70 DS7712-108 129.70 DS7812-108 125.70 10' DS7711-120 138.40 DS7811-120 134.40 DS8811-120 171.00 DS7712-120 138.40 DS7812-120 134.40 10'6 DS7711-126 142.80 DS7811-126 138.80 DS8811-126 178.90 DS7712-126 142.80 DS7812-126 138.80 11' DS7711-132 149.50 DS7811-132 145.50 DS8811-132 186.80 DS7712-132 149.50 DS7812-132 145.50 12' DS7711-144 160.60 DS7811-144 156.60 DS8811-144 194.70 DS7712-144 160.60 DS7812-144 156.60 13' DS7711-156 168.40 DS7811-156 164.40 DS7712-156 168.40 DS7812-156 164.40 14' DS7711-168 172.40 DS7811-168 168.40 DS7712-168 172.40 DS7812-168 168.40 15' DS7711-180 173.00 DS7811-180 169.00 DS7712-180 173.00 DS7812-180 169.00 21' DS7711-252 238.00 DS7811-252 234.00 DS7712-252 238.00 DS7812-252 234.00 TAPER GAUGE TG711 TAPER GAUGE 7/8" X 11 TG811 TAPER GAUGE 1" X 11 TG712 TAPER GAUGE 7/8" X 12 TG812 TAPER GAUGE 1" X 12 $65.33 65.33 65.33 65.33 NEED REPAIR? We can re-taper, unplug and straighten your steel. NEED SPECIAL LENGTH? We can cut and taper steel to any length. BIT SHELLS BR-BS7811-6 REAMING BIT ADAPT 7/8" X 11 $46.66 BR-BS7811-6 REAMING BIT ADAPT 7/8" X 12 46.75 BR-BS8811-6 REAMING BIT ADAPT1" X 11 40.00 8

MINING AND CONSTRUCTION CONSUMABLES 9 Tapered Drill Steel & Bits 7/8" x 11 SINGLE PASS 7/8" x 11 DEEP INSERT TB71125 TAPERED BIT 7/8 X 11 1" TB71128 TAPERED BIT 7/8 X 11 1 1/8" TB71132 TAPERED BIT 7/8 X 11 1 1/4" TB71135 TAPERED BIT 7/8 X 11 1 3/8" TB71138 TAPERED BIT 7/8 X 11 1 1/2" $18.50 17.70 17.70 17.70 18.60 TB71135D TAPERED BIT 7/8 X 11 1 3/8" TB71138D TAPERED BIT 7/8 X 11 1 1/2" TB71141D TAPERED BIT 7/8 X 11 1 5/8" 1" x 11 SINGLE PASS $34.50 41.90 45.20 TB71141 TAPERED BIT 7/8 X 11 1 5/8" 20.70 TB81135 TAPERED BIT 1" X 11 1 3/8" $17.70 TB71145 TAPERED BIT 7/8 X 11 1 3/4" TB71148 TAPERED BIT 7/8 X 11 1 7/8" TB71151 TAPERED BIT 7/8 X 11 2" 21.70 28.00 33.30 TB81138 TAPERED BIT 1" X 11 1 1/2" TB81141 TAPERED BIT 1" X 11 1 5/8" TB81145 TAPERED BIT 1" X 11 1 3/4" 18.60 20.70 21.70 TB81151 TAPERED BIT 1" X 11 2" 33.30 7/8" x 12 DEEP INSERT TB71225 TAPERED BIT 7/8 X 12 1" $33.20 TB71235 TAPERED BIT 7/8 X 12 1 3/8" 34.50 TB71238 TAPERED BIT 7/8 X 12 1 1/2" 41.90 TB71241 TAPERED BIT 7/8 X 12 1 5/8" 45.20 TB71245 TAPERED BIT 7/8 X 12 1 3/4" 52.10 TB71251 TAPERED BIT 7/8 X 12 2" Call REAMING BITS BR22MM64 REAMING BIT BUTTON 2 ½" $175.00 BR22MM76 REAMING BIT BUTTON 3" 200.00 BR22MM89 REAMING BIT BUTTON 3 ½" 225.00 BR22MM57-6W REAMING BIT 6-WING 2 ¼" 180.00 BR22MM64-6W REAMING BIT 6-WING 2 ½" 175.00 BR22MM76-6W REAMING BIT 6-WING 3" 200.00 PROBLEM SOLVED! We specialize in the hard to find. Don t see what you need? We will find it! Can t find it? We will Build it! BIT KNOCKER Call us at BN78 BIT KNOCKER 7/8" $37.40 BN88 BIT KNOCKER 1" 40.15 BIT ADAPTER BAR25-7811 1" ROPE TO 7/8 X 11 BAR22-7811 7/8" ROPE TO7/8 X 11 BAR25-7812 1" ROPE TO 1 X 12 $36.25 Call 45.00 9

10 MINING AND CONSTRUCTION CONSUMABLES Integral Drill Rod and Reaming Equipment 7/8" X 4¼ X SERIES 16 INT78S16-24 7/8" X 4¼ X 2'0" X 1-3/8" BIT $116.80 INT78S16-47 7/8" X 4¼ X 3'11" X 1-11/32" BIT 129.50 INT78S16-71 7/8" X 4¼ X 5'11" X 1-19/64" BIT 139.40 INT78S16-94 7/8" X 4¼ X 7'10" X 1-1/4" BIT 145.00 7/8" X 4¼ X SERIES 17 INT78S17-24 7/8" X 4¼ X 2'0" X 1-5/8" BIT $128.20 INT78S17-48 7/8" X 4¼ X 3'11" X 1-37/64" BIT 139.40 INT78S17-72 7/8" X 4¼ X 5'11" X 1-17/32" BIT 149.20 INT78S17-96 7/8" X 4¼ X 7'10" X 1-1/2" BIT 154.90 6 AND 12 REAMING BUTTON BITS 6 (SMALL) 12 (LARGE) 2½" BR6DG64 $190.00 3" BR6DG76 200.00 3½" BR6DG89 225.00 BR12DG89 $225.00 4" BR6DG102 310.00 BR12DG102 310.00 7/8" X 4¼ X SERIES 11 INT78S11-31 7/8" X 4¼ X 2'7" X 1-11/32" BIT $116.80 INT78S11-63 INT78S11-94 INT78S11-126 INT78S11-156 INT78S11-189 INT78S11-220 7/8" X 4¼ X 5'3" X 1-19/64" BIT 7/8" X 4¼ X 7'10" X 1-1/4" BIT 7/8" X 4¼ X 10'6" X 1-7/32" BIT 7/8" X 4¼ X 13'1" X 1-3/16" BIT 7/8" X 4¼ X 15'9" X 1-9/64" BIT 7/8" X 4¼ X 18'4" X 1-7/64" BIT 132.40 145.00 162.00 194.40 211.20 Call PR78-31 PR78-47 PILOT ROD 7/8" X 4¼ 12 Carbide Insert PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 2'7" PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 3,11" INT78S11-252 7/8" X 4¼ X 21' X 1-9/16" BIT 7/8" X 4¼ X SERIES 12 Call PR78-63 PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 5'3" INT78S12-31 INT78S12-63 INT78S12-94 INT78S12-126 INT78S12-156 7/8" X 4¼ X 2'7" X 1-37/64" BIT 7/8" X 4¼ X 5'3" X 1-17/32" BIT 7/8" X 4¼ X 7'10" X 1-1/2" BIT 7/8" X 4¼ X 10'6" X 1-23/64" BIT 7/8" X 4¼ X 13'1" X 1-27/36" BIT $129.50 142.20 154.90 167.40 194.40 PR78-79 PR78-94 PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 6'7" PILOT ROD 7/8 X 4¼ - 12 CARBIDE INSERT 7'10" TAPERED BIT SHELLS 1" INTEGRAL DRILL RODS BR-BS7811-6 REAMING BIT ADAPT 7/8" X 11 $46.66 INT88-24 INT88-48 1" X 4¼ 1 x 4 1/4" x 2' X 1 3/4" BIT 1 x 4 1/4" x 4' X 1 22/32" BIT $131.00 150.70 BR-BS7811-6 REAMING BIT ADAPT 7/8" X 12 BR-BS8811-6 REAMING BIT ADAPT 1" X 11 46.75 40.00 INT88-72 1 x 4 1/4" x 6' X 1 11/18" BIT 160.50 INT88-96 1 x 4 1/4" x 8' X 1 21/32" BIT 174.70 THREADED PILOT ADAPTERS REAMING BITS BUTTON BIT 6 - WING 2¼" BR22MM57 $180.00 BR22MM57C $180.00 2½" BR22MM67 175.00 BR22MM67C 175.00 6 (SMALL) 12 (LARGE) 1" ROPE (R25) BR-PAR25-6 $175.00 BR-PAR25-12 $175.00 1¼" ROPE (R32) BR-PAR32-6 175.00 BR-PAR32-12 $175.00 2¾" BR22MM70 Call BR22MM70C Call 3" BR22MM76 200.00 BR22MM76C 200.00 3½" BR22MM89 225.00 BR22MM89C 225.00 10

MINING AND CONSTRUCTION CONSUMABLES 11 H & D STEEL and BITS H THREAD STEEL (Shank Size) Length 3/4 X 4¼ PRICE 7/8 X 3¼ PRICE 7/8 X 4¼ PRICE 1 X 4¼ PRICE 1' DS68H-12 $56.40 DS77H-12 $56.40 DS78H-12 $56.40 DS88H-12 $60.70 1-½' DS68H-18 $61.70 DS77H-18 $61.70 DS78H-18 $61.70 DS88H-18 $66.30 2' DS68H-24 $115.00 DS77H-24 $64.80 DS78H-24 $64.80 DS88H-24 $69.70 2-½' DS77H-30 $69.80 DS78H-30 $69.80 DS88H-30 $75.80 3' DS77H-36 $76.90 DS78H-36 $76.90 DS88H-36 $81.70 4' DS77H-48 $85.60 DS78H-48 $85.60 DS88H-48 $93.00 5' DS77H-60 $97.00 DS78H-60 $97.00 DS88H-60 $104.40 6' DS77H-72 $106.20 DS78H-72 $106.20 DS88H-72 $116.00 8' DS77H-96 $127.40 DS78H-96 $127.40 DS88H-96 $140.20 10' DS77H-120 $148.00 DS78H-120 $148.00 DS88H-120 $166.70 12' DS77H-144 $169.00 DS78H-144 $169.00 DS88H-144 $189.80 D THREAD STEEL (Shank Size) Length 3/4 X 4¼ PRICE 7/8 X 3¼ PRICE 7/8 X 4¼ PRICE 1 X 4¼ PRICE 1' DS68D-12 $87.50 DS77D-12 $87.50 DS78D-12 $87.50 DS88D-12 $85.30 1-½' DS68D-18 $95.90 SA77D-18 $95.90 DS78D-18 $95.90 DS88D-18 $88.30 2' DS68D-24 $115.00 DS77D-24 $115.00 DS78D-24 $115.00 DS88D-24 $93.50 2-½' DS88D-30 $101.00 ACCESSORIES - BIT ADAPTERS 3' DS88D-36 $102.40 4' BAH-D H THD (FM) - D THD (MALE) $41.20 DS88D-48 $112.40 5' CPLH H THD COUPLING $23.30 DS88D-60 $123.30 6' BAR25-H 1" ROPE (FM) - H THD (MALE) $65.00 DS88D-72 $133.60 BAR25-D 1" ROPE (FM) - D THE (MALE) $69.55 11

12 MINING AND CONSTRUCTION CONSUMABLES H & D STEEL and BITS CARBIDE CROSS BIT BUTTON BIT Bit Diam. H-THREAD PRICE D-THREAD PRICE H-THREAD PRICE 1-3/8" BCH35 $39.20 BCD35 BBH35 $55.40 1-1/2" BCH38 $43.10 BCD38 BBH38 $61.10 1-5/8" BCH41 $52.10 BCD41 BBH41 $62.50 1-3/4" BCH45 $56.80 BCD45 $71.00 BBH45 $69.70 1-7/8" BCH48 $62.90 BCD48 $79.00 BBH48 $71.40 2" BCH51 $67.20 BCD51 $75.40 BBH51 $77.10 2-1/4" BCH57 $77.70 BCD57 $80.00 BBH57 $81.30 2-3/8" BCH60 $115.00 BCD60 $75.00 2-1/2" BCH64 $102.10 BCD64 $96.00 BBH64 $105.00 2-5/8" BCH67 $115.00 BCD67 Call 2-3/4" BCH70 $120.00 BCD70 $115.00 3" BCH76 $138.20 BCD76 $143.20 ALL STEEL BITS CARBIDE SHALLOW INSERT Bit Diam. H-THREAD PRICE D-THREAD PRICE H-THREAD PRICE 1-3/8" BSH35 $7.65 BCH35S $29.70 1-1/2" BSH38 $7.65 BSH38S $33.10 1-5/8" BSH41 $8.15 BSH41S $35.80 1-3/4" BSH45 $8.15 BSD45 $10.45 BCH45S $38.10 1-7/8" BSH48 $8.50 BSD48 $10.45 2" BSH51 $8.50 BSD51 $10.60 BCH51S $43.90 2-1/4" BSH57 $9.40 BSD57 $11.10 2-1/2" BSH64 $11.10 BSD64 $11.45 2-5/8" BSH67 $12.75 2-3/4" BSD70 $11.70 3" BSD76 $12.65 3-1/4 BSD89 $14.10 3-1/2 BSD92 $16.65 4 BSD102 $34.00 12

MINING AND CONSTRUCTION CONSUMABLES 13 RIVET BUSTER TOOLS STANDARD 80X JUMBO 11X Working End Rivet Size Part No. Length Price Part No. Length Price Blank RB80X-BLK-12 12 $16.70 RB11X-BLK-12 12 $19.50 Point RB80X-MP-9 9 15.60 RB11X-MP-10 9 18.20 RB80X-MP-12 12 19.30 RB11X-MP-12 12 22.10 RB80X-MP-18 18 27.20 RB11X-MP-18 18 29.40 Narrow Chisel RB80X-NC-9 9 15.60 RB11X-NC-10 9 18.20 RB80X-NC-12 12 19.30 RB11X-NC-12 12 22.10 RB80X-NC-18 18 27.20 RB11X-NC-18 18 29.40 Side Cut Chisel RB80X-SC-9 9 16.10 RB11X-SC-10 9 18.80 RB80X-SC-12 12 23.40 RB11X-SC-12 12 22.50 RB80X-SC-18 18 28.40 RB11X-SC-18 18 31.80 Ripper Non-Spark RB11X-RIP-9BC 10 164.45 Back Out Punches 3/8 RB80X-BP375-9 9 17.90 RB11X-BP375-10 10 20.50 1/2 RB80X-BP500-9 9 17.90 RB11X-BP500-10 10 20.50 3/4 RB80X-BP750-9 9 17.90 RB11X-BP750-10 10 20.50 7/8 RB80X-BP875-9 9 17.90 RB11X-BP875-10 10 20.50 Clear ance Tube Size Gauge Heat Exchanger Punches 4 3/4 12ga RB11X-HP-750-4-12 4 1 14ga RB11X-HP-100-4-14 6 3/4 12ga RB11X-HP-750-6-12 6 3/4 14ga RB11X-HP-750-6-14 6 1 12ga RB11X-HP-100-6-12 8 3/4 12ga RB11X-HP-750-8-12 8 3/4 14ga RB11X-HP-750-8-14 We Carry Pneumatic & Hydraulic Rivet Buster Tools! Check Our Web Sites: CrowderAirTools.com (APT tools) CrowderPneumatics.com (CP tools) CrowderHydraulicTools.com (Atlas Copco) 13

14 MINING AND CONSTRUCTION CONSUMABLES Chipping Hammer Tools BLANK ROUND SHANK Oval Collar ROUND SHANK Oval Collar HEX SHANK Oval Collar HEX SHANK Round Collar PRICE 8½ CH680-BLK-8 CH680R-BLK-8 CH580-BLK-8 CH580R-BLK-8 $11.70 11 1/2 CH680-BLK-11 CH680R-BLK-11 CH580-BLK-11 CH580R-BLK-11 $13.90 MOIL POINT NARROW CHISEL 9" CH680-MP-9 CH680R-MP-9 CH580-MP-9 CH580R-MP-9 $11.70 12" CH680-MP-11 CH680R-MP-11 CH580-MP-11 CH580R-MP-11 $13.90 18" CH680-MP-18 CH680R-MP-18 CH580-MP-18 CH580R-MP-18 $17.80 24" CH680-MP-24 CH680R-MP-24 CH580-MP-24 CH580R-MP-24 $22.60 36" CH680-MP-36 CH680R-MP-36 CH580-MP-36 CH580R-MP-36 $29.80 48" CH680-MP-48 CH680R-MP-48 CH580-MP-48 CH580R-MP-48 $39.40 60" CH680-MP-60 CH680R-MP-60 CH580-MP-60 CH580R-MP-60 $48.50 72" CH680-MP-72 CH680R-MP-72 CH580-MP-72 CH580R-MP-72 $56.70 9" CH680-NC-9 CH680R-NC-9 CH580-NC-9 CH580R-NC-9 $11.70 12" CH680-NC-12 CH680R-NC-12 CH580-NC-12 CH580R-NC-12 $13.90 18" CH680-NC-18 CH680R-NC-18 CH580-NC-18 CH580R-NC-18 $17.80 24" CH680-NC-24 CH680R-NC-24 CH580-NC-24 CH580R-NC-24 $22.60 36" CH680-NC-36 CH680R-NC-36 CH580-NC-36 CH580R-NC-36 $29.80 48" CH680-NC-48 CH680R-NC-48 CH580-NC-48 CH580R-NC-48 $39.40 60" CH680-NC-60 CH680R-NC-60 CH580-NC-60 CH580R-NC-60 $48.50 72" CH680-NC-72 CH680R-NC-72 CH580-NC-72 CH580R-NC-72 $56.70 1 1/2 CHISEL 9" CH680-C38-9 CH680R-C38-9 CH580-C38-9 CH580R-C38-9 $13.90 12" CH680-C38-12 CH680R-C38-12 CH580-C38-12 CH580R-C38-12 $16.20 18" CH680-C38-18 CH680R-C38-18 CH580-C38-18 CH580R-C38-18 $20.50 2 CHISEL 9" CH680-C51-9 CH680R-C51-9 CH580-C51-9 CH580R-C51-9 $15.60 12" CH680-C51-12 CH680R-C51-12 CH580-C51-12 CH580R-C51-12 $18.00 18" CH680-C51-18 CH680R-C51-18 CH580-C51-18 CH580R-C51-18 $21.50 2 1/2 CHISEL 9" CH680-C64-9 CH680R-C64-9 CH580-C64-9 CH580R-C64-9 $32.30 3 CHISEL 12 CH680-C64-12 CH680R-C64-12 CH580-C64-12 CH580R-C64-12 $34.40 18 CH680-C64-18 CH680R-C64-18 CH580-C64-18 CH580R-C64-18 $36.50 9" CH680-C76-9 CH680R-C76-9 CH580-C76-9 CH580R-C76-9 $37.70 12" CH680-C76-12 CH680R-C76-12 CH580-C76-12 CH580R-C76-12 $48.00 18" CH680-C76-18 CH680R-C76-18 CH580-C76-18 CH580R-C76-18 CALL BUSHING TOOLS 1-PIECE CH680-BH-1PC CH680R-BH-1PC CH580-BH-1PC CH580R-BH-1PC $57.70 CARBIDE INSERTED CH680-BH-CARBIDE CH680R-BH-CARBIDE CH580-BH-CARBIDE CH580R-BH-CARBIDE $145.30 Chipping Hammers and Parts Available We Carry Chipping Hammers Check Our Web Sites: CrowderAirTools.com CrowderPneumatics.com CrowderHydraulicTools.com 14

MINING AND CONSTRUCTION CONSUMABLES 15 PAVING BREAKER TOOLS Shank Size / Len MOIL POINT NARROW CHISEL PRICE 3" CHISEL PRICE 7/8" X 3-1/4" 14" PB77-MP-14 PB77-NC-14 $ 21.60 PB77-3C-14 $ 30.00 18" PB77-MP-18 PB77-NC-18 $ 23.80 PB77-3C-18 $ 32.90 7/8" X 4-1/4" 24" PB77-MP-24 PB77-NC-24 $ 30.90 PB77-3C-24 $ 45.20 36" PB77-MP-36 PB77-NC-36 $ 43.40 PB77-3C-36 $ 66.90 1" X 4-1/4" 14" PB88-MP-14 PB88-NC-14 $ 23.10 PB88-3C-14 $ 30.50 18" PB88-MP-18 PB88-NC-18 $ 26.10 PB88-3C-18 $ 34.40 24" PB88-MP-24 PB88-NC-24 $ 30.00 PB88-3C-24 $ 41.70 36" PB88-MP-36 PB88-NC-36 $ 42.20 PB88-3C-36 $ 64.20 48" PB88-MP-48 PB88-NC-48 $ 58.50 PB88-3C-48 $ 92.30 60" PB88-MP-60 PB88-NC-60 $ 73.50 PB88-3C-60 $ 121.40 72" PB88-MP-72 PB88-NC-72 $ 88.30 PB88-3C-72 $ 146.60 1-1/8" X 6" 14" PB98-MP-14 PB98-NC-14 $ 26.00 PB98-3C-14 $ 34.10 18" PB98-MP-18 PB98-NC-18 $ 28.90 PB98-3C-18 $ 36.50 24" PB98-MP-24 PB98-NC-24 $ 32.80 PB98-3C-24 $ 45.40 36" PB98-MP-36 PB98-NC-36 $ 51.50 PB98-3C-36 $ 71.60 48" PB98-MP-48 PB98-NC-48 $ 69.90 PB98-3C-48 $ 102.00 60" PB98-MP-60 PB98-NC-60 $ 89.20 PB98-3C-60 $ 132.30 72" PB98-MP-72 PB98-NC-72 $ 109.20 PB98-3C-72 $ 165.20 1-1/4" X 6" 14" PB108-MP-14 PB108-NC-14 $ 30.00 PB108-3C-14 $ 37.40 18" PB108-MP-18 PB108-NC-18 $ 32.80 PB108-3C-18 $ 41.40 24" PB108-MP-24 PB108-NC-24 $ 37.20 PB108-3C-24 $ 47.90 36" PB108-MP-36 PB108-NC-36 $ 61.90 PB108-3C-36 $ 81.30 48" PB108-MP-48 PB108-NC-48 $ 89.60 PB108-3C-48 $ 118.50 60" PB108-MP-60 PB108-NC-60 $ 115.90 PB108-3C-60 $ 154.70 72" PB108-MP-72 PB108-NC-72 $ 143.90 PB108-3C-72 $ 192.50 Shank Size ASPHALT CUTTER PRICE BRUSHING TOOL PRICE 7/8" X 2-3/4" PB77-BH $97.80 7/8" X 3-1/4" PB77-AC $76.70 PB78-BH $87.60 7/8" X 4-1/4" PB78-AC $84.40 1" X 4-1/4" PB88-AC $76.70 PB88-BH $87.60 1-1/8" X 6" PB98-AC $78.10 PB98-BH $91.30 1-1/4" X 6" PB109-AC $80.90 PB109-BH $93.50 15

16 MINING AND CONSTRUCTION CONSUMABLES PAVING BREAKER TOOLS Shank Size PRICE Shank Size DIGGING CHISEL PRICE 1-1/8" X 6" PB77-DC $85.40 1-1/4" X 6" PB78-DC $93.90 PB88-DC $85.40 PB98-DC $89.20 PB109-DC $92.30 ASPHALT WEDGE 1" X 4-1/4" PB88-AW 1-1/8" X 6" PB98-AW 1-1/4" X 6" PB108-AW $75.20 $76.40 $83.50 Shank Size CONCRETE BREAKER PRICE Shank Size 1" X 4-1/4" PB88-FW 1-1/8" X 6" PB98-FW 1-1/4" X 6" PB108-FW FROST WEDGE PRICE $93.20 $93.20 $93.20 Shank Size Blade CLAY SPADE PRICE 7/8" X 3-1/4" 4-1/2" PB77-CS-4.5 $97.00 5-1/2" PB77-CS-5.5 $97.00 7/8" X 4-1/4" 5-1/2" PB78-CS-5.5 $106.70 1" X 4-1/4" 4-1/2" PB88-CS-4.5 $97.00 5-1/2" PB88-CS-5.5 $97.00 1-1/8" X 6" 4-1/2" PB98-CS-4.5 $103.00 5-1/2" PB98-CS-5.5 $103.60 1-1/4" X 6" 4-1/2" PB109-CS-4.5 $108.20 5-1/2" PB109-CS-5.5 $108.20 Shank Size 1-1/8" X 6" 1-1/4" X 6" Hole Size Unit PLUG AND FEATHERS SET PRICE 1-1/2" Shank PB98-SHK-150 $ 96.80 Feathers PB98-FTH-150 $ 25.60 2" Shank PB98-SHK-200 $ 96.80 Feathers PB98-FTH-200 $ 27.80 1-1/2" Shank PB108-SHK-150 $ 98.20 Feathers PB108-FTH-150 $ 25.60 2" Shank PB108-SHK-200 $ 98.20 Feathers PB108-FTH-200 $ 27.80 1" X 4-1/4" PB88-CB 1-1/8" X 6" PB98-CB 1-1/4" X 6" PB108-CB Shank Size 7/8" X 3-1/4" 1" X 4-1/4" 1-1/8" X 6" 1-1/4" X 6" Rod Size Socket Size GROUND ROD DRIVER PRICE 5/8" 11/16" PB77-GR-625 $ 74.60 3/4" 13/16" PB77-GR-750 $ 74.60 5/8" 11/16" PB88-GR-625 $ 74.60 3/4" 13/16" PB88-GR-750 $ 74.60 7/8" 15/16" PB88-GR-875 $ 84.40 1" 1-1/16" PB88-GR-100 $ 91.70 5/8" 11/16" PB98-GR-625 $ 76.80 3/4" 13/16" PB98-GR-750 $ 76.80 7/8" 15/16" PB98-GR-875 $ 88.60 1" 1-1/16" PB98-GR-100 $ 96.80 5/8" 11/16" PB108-GR-625 $ 84.80 3/4" 13/16" PB108-GR-750 $ 84.80 7/8" 15/16" PB108-GR-875 $ 94.80 1" 1-1/16" PB108-GR-100 $98.20 $99.80 $107.00 $ 106.3 0 TARMAC CUTTER Shank Size Blade (10-1/2" under collar) PRICE 1-1/8" X 6" 4-1/2" PB98-TC $74.60 1-1/4" X 6" 4-1/2" PB108-TC $75.70 16

MINING AND CONSTRUCTION CONSUMABLES 17 PIPE DRIVING TOOLS Shank Size DETACHABLE SHANK PRICE 7/8" X 3-1/4" Small Taper PB77-DS-ST $60.90 Large Taper PB77-DS $60.90 7/8" X 4-1/4" Small Taper PB78-DS-ST $60.90 Large Taper PB78-DS $60.90 1" X 4-1/4" Small Taper PB88-DS-ST $60.90 Large Taper PB88-DS $60.90 1-1/8" X 6" Large Taper PB98-DS $60.90 1-1/4" X 6" Large Taper PB108-DS $60.90 Shank Size U-CHANNEL & PIPE DRIVERS PRICE 7/8" x 4-1/4" Shank only PD78-PIPE $85.00 1 x 4-1/4" Shank only PD88-PIPE $85.00 1-1/8" X 6" Shank only PD98-PIPE $85.00 1-1/4" X 6" Shank only PD108-PIPE $85.00 CUP Cup only 2-5/8 ID PD-PIPE-CUP $105.00 Pin Driver Working End 1 x 4-1/4 Hex 1-1/8 x 6 Hex 1-1/4 x 6 Hex 5/8 PB88-PD625 $84.90 PB98-PD625 $89.30 PB108-PD625 $92.60 3/4 PB88-PD750 84.90 PB98-PD750 89.30 PB108-PD750 92.60 7/8 PB88-PD875 84.90 PB98-PD875 89.30 PB108-PD875 92.60 1 PB88-PD100 142.40 PB98-PD100 89.30 PB108-PD100 92.60 1-1/4 PB88-PD125 142.40 PB98-PD125 142.40 PB108-PD125 142.40 1-1/2 PB88-PD150 142.40 PB98-PD150 142.40 PB108-PD150 142.40 1-3/4 PB88-PD175 142.40 PB98-PD175 142.40 PB108-PD175 142.40 2 PB88-PD200 142.40 PB98-PD200 142.40 PB108-PD200 142.40 2-1/2 PB88-PD250 213.20 PB98-PD250 213.20 PB108-PD250 213.20 Type ROUND PIPE DRIV- ERS (for large taper shank) Use with Detachable Shank PRICE 1-1/4 Cup PD-LT-32CUP $90.00 1-1/2 CUP PD-LT-38CUP $90.00 2 2-1/2" 3 " Pin PD-LT-51PIN $92.50 Cup PD-LT-51CUP $92.50 Pin PD-LT-64PIN $92.50 Cup PD-LT-64CUP $92.50 Pin PD-LT-76PIN $100.00 Cup PD-LT-76CUP $105.00 Pad Size TAMPING PADS PRICE 6 " Round PB-TAMP-LT-6RD $107.60 Square PB-TAMP-LT-6SQ $107.60 7 " Round PB-TAMP-LT-7RD $107.60 8 " Square PB-TAMP-LT-8S $127.80 Size SQUARE POST DRIVERS Use with Detachable Shank PRICE 1-1/2 " Large Taper PD-LT-38SQ $85.75 1-3/4" Large Taper PD-LT-45SQ $85.75 2" Large Taper PD-LT-51SQ $85.75 2-1/4" Large Taper PD-LT-57SQ $92.50 2-1/2" Large Taper PD-LT-64SQ $105.00 17

18 MINING AND CONSTRUCTION CONSUMABLES Carbide Tipped Whirly Bit Dril SHANK SIZE SHANK SIZE l Bit 7/8" X 3¼" 7/8" X 4¼ PRICE 6" 5/8" WB77-625-6 WB78-625-6 $109.90 9" 5/8" WB77-625-9 WB78-625-9 $114.70 14" 5/8" WB77-625-14 WB78-625-14 $127.90 20" 5/8" WB77-625-20 WB78-625-20 $137.60 6" 3/4" WB77-750-6 WB78-750-6 $90.70 9" 3/4" WB77-750-9 WB78-750-9 $96.70 14" 3/4" WB77-750-14 WB78-750-14 $108.60 20" 3/4" WB77-750-20 WB78-750-20 $109.90 26" 3/4" WB77-750-26 WB78-750-26 $111.20 6" 7/8" WB77-875-6 WB78-875-6 $93.30 9" 7/8" WB77-875-9 WB78-875-9 $94.40 14" 7/8" WB77-875-14 WB78-875-14 $105.10 20" 7/8" WB77-875-20 WB78-875-20 $109.90 26" 7/8" WB77-875-26 WB78-875-26 $112.50 6" 1" WB77-100-6 WB78-100-6 Call 9" 1" WB77-100-9 WB78-100-9 $100.50 14" 1" WB77-100-14 WB78-100-14 $105.20 20" 1" WB77-100-20 WB78-100-20 $106.40 26" 1" WB77-100-26 WB78-100-26 $110.70 9" 1-1/8" WB77-1125-9 WB78-1125-9 $102.80 14" 1-1/8" WB77-1125-14 WB78-1125-14 $105.20 20" 1-1/8" WB77-1125-20 WB78-1125-20 $107.60 26" 1-1/8" WB77-1125-26 WB78-1125-26 $111.20 9" 1-1/4" WB77-1250-9 WB78-1250-9 $108.90 14" 1-1/4" WB77-1250-12 WB78-1250-12 $111.20 20" 1-1/4" WB77-1250-202 WB78-1250-20 $110.70 26" 1-1/4" WB77-1250-26 WB78-1250-26 $117.30 9" 1-3/8" WB77-1375-9 WB78-1375-9 $105.20 14" 1-3/8" WB77-1375-14 WB78-1375-14 $109.90 20" 1-3/8" WB77-1375-20 WB78-1375-20 $111.20 26" 1-3/8" WB77-1375-26 WB78-1375-26 $110.70 9" 1-1/2" WB77-1500-9 WB78-1500-9 $121.00 14" 1-1/2" WB77-1500-14 WB78-1500-14 $125.80 20" 1-1/2" WB77-1500-20 WB78-1500-20 $130.50 26" 1-1/2" WB77-1500-26 WB78-1500-26 $138.20 Drill Bit C-9 Whilibits PRICE 8" 1/2" WBCP9-500-8 $88.80 10.5" 1/2" WBCP9500-10.5 $101.50 8" 5/8" WBCP9-625-8 $91.90 12" 5/8" WBCP9-625-12 $102.80 18" 5/8" WBCP9-625-18 $118.40 8" 3/4" WBCP9-750-8 $93.90 12" 3/4" WBCP9-750-12 $104.00 18" 3/4" WBCP9-750-18 $119.70 8" 7/8" WBCP9-875-9 $94.40 12" 7/8" WBCP9-875-12 $105.20 18" 7/8" WBCP9-875-18 $121.00 8" 1" WBCP9-100-8 $96.70 12" 1" WBCP9-100-12 $107.60 18" 1" WBCP9-100-18 $124.60 24" 1" WBCBCP9-100-24 $133.00 8" 1-1/8" WBC9-1125-8 $99.20 12" 1-1/8" WBCP9-1125-12 $110.00 18" 1-1/8" WBCP9-1125-18 $118.40 8" 1-1/4" WBCP9-1250-8 $107.60 12" 1-1/4" WBCP9-1250-12 $118.50 18" 1-1/4" WBCP9-1250-18 $132.90 8" 1-3/8" WBCP9-1375-8 $110.00 12" 1-3/8" WBCP9-1375-12 $121.00 18" 1-3/8" WBCP9-1375-18 $138.20 8" 1-1/2" WBCP9-1500-8 $118.00 12" 1-1/2" WBCP9-1500-12 $129.50 18" 1-1/2" WBCP9-1500-18 $137.90 18

MINING AND CONSTRUCTION CONSUMABLES 19 Carbide Tipped Whirly Bit Drill Bit SHANK SIZE 1" X 4¼" PRICE SHANK SIZE 3/4" X 3 1/4" PRICE SHANK SIZE 3/4" X 4 1/4" PRICE 6" 5/8" WB57-625-5 Call WB67-625-5 Call 6" 3/4" WB88-750-6 Call WB57-750-5 Call WB67-750-5 Call 9" 3/4" WB88-725-9 $110.00 12" 3/4" WB-57-750-12 Call 14" 3/4" WB88-750-14 $118.50 18" 3/4" WB57-750-18 Call 20" 3/4" WB88-750-20 $119.70 26" 3/4" WB88-750-26 $119.70 WB57-750-24 Call 6" 7/8" WB88-875-6 $112.50 WB57-875-5 Call WB67-875-5 Call 8" 7/8" 9" 7/8" WB88-875-9 $110.70 12" 7/8" 14" 7/8" WB88-875-14 $114.90 18" 7/8" 20" 7/8" WB88-875-20 $117.30 26" 7/8" WB88-875-26 $121.90 6" 1" WB88-100-6 Call WB57-100-5 Call 8" 1" 9" 1" WB88-100-9 $123.40 WB57-100-9 Call 12" 1" 14" 1" WB88-100-14 $125.80 18" 1" 20" 1" WB88-100-20 $137.50 24" 1" 26" 1" WB88-100-2626 $138.20 8" 1-1/8" WB57-1125-7 Call WB67-1125-7 Call 9" 1-1/8" WB88-1125-9 $127.90 12" 1-1/8" 14" 1-1/8" WB88-1125-14 $129.50 18" 1-1/8" 20" 1-1/8" WB88-1125-20 $133.00 26" 1-1/8" WB88-1125-26 $139.10 8" 1-1/4" 9" 1-1/4" WB88-1250-9 $132.50 12" 1-1/4" 14" 1-1/4" WB88-1250-12 $131.80 18" 1-1/4" 20" 1-1/4" WB88-1250-20 $134.30 26" 1-1/4" WB88-1250-26 $146.10 8" 1-3/8" 9" 1-3/8" WB88-1375-9 $127.00 12" 1-3/8" 14" 1-3/8" WB88-1375-14 $133.00 18" 1-3/8" 20" 1-3/8" WB88-1375-20 $139.10 26" 1-3/8" WB88-1375-26 $146.10 8" 1-1/2" 9" 1-1/2" WB88-1500-9 $130.50 12" 1-1/2" 14" 1-1/2" WB88-1500-14 $138.60 18" 1-1/2" 20" 1-1/2" WB88-1500-20 $140.30 26" 1-1/2" WB88-1500-26 $141.40 Drill Bit U7 Whirlibits PRICE 8" 1/2" WBU7-500-8 $120.90 10.5" 1/2" WBU7-500-12 $129.20 8" 5/8" WBU7-625-8 $120.90 12" 5/8" WBU7-625-12 $129.20 8" 3/4" WBU7-750-8 $120.90 12" 3/4" WBU7-750-12 $129.20 8" 7/8" WBU7-875-8 WB67-1375- 19 Call $105.10 12" 7/8" WBU7-875-12 $116.05 8" 1" WBU7-100-8 $107.20 12" 1" WBU7-100-12 $118.20 8" 1-1/8" WBU7-1125-8 $109.45 12" 1-1/8" WBU7-1125-12 $120.40 8" 1-1/4" WBU7-1250-8 $118.20 12" 1-1/4" WBU7-1250-12 $132.85 19

20 MINING AND CONSTRUCTION CONSUMABLES Threaded Steel & Bits 1" ROPE - R25-100 ROPE EXTENSION ROD SHANKED ROD 7/8" HEX 1" HEX 7/8 X 4 1/4 1 X 4 1/4 12" ER25-22H-12 $58.00 ER25-25H-12 Call DS78R25-12 $83.10 DS88R25-12 $83.10 18" ER25-22H-18 83.90 ER25-25H-18 Call DS78R25-18 85.00 DS88R25-18 98.90 2' ER25-22H-24 82.70 ER25-25H-24 Call DS78R25-24 110.60 DS88R25-24 113.90 DS78R25-30 97.00 DS88R25-30 97.00 DS78R25-36 123.30 DS88R25-36 126.50 4' ER25-22H-48 91.90 ER25-25H-48 91.90 DS78R25-48 132.70 DS88R25-48 136.00 6' ER25-22H-72 112.90 ER25-25H-72 112.90 DS78R25-72 155.10 DS88R25-72 158.10 8' ER25-22H-96 135.60 ER25-25H-96 135.60 DS78R25-96 180.20 DS88R25-96 183.40 10' ER25-22H-120 161.30 ER25-25H-120 204.00 DS78R25-120 208.70 DS88R25-120 211.90 12' ER25-22H-144 220.00 ER25-25H-144 Call DS78R25-144 245.00 DS88R25-144 245.00 ROCK BITS COUPLING CROSS BIT BUTTON BIT REAMING BIT CPLR25 1" ROPE COUPLING 1-1/2 OD $36.10 1 3/8" BCR2535 $52.80 BBR2535 $61.80 1 1/2" BCR2538 57.00 BBR2538 61.80 1 5/8" BCR2541 62.70 BBR2541 64.50 1 3/4" BCR2545 67.10 BBR2545 71.10 1 7/8" BCR2548 73.40 BBR2548 75.10 2" BCR2550 80.40 BBR2550 79.20 2 1/4" BCR2557 91.20 BBR2557 76.40 2 1/2" BCR2564 125.00 BBR2564 120.00 BRR2564 Call 3" BCR2576 140.00 BBR2576 151.00 BRR2576 Call 3 1/2" BRR2589 Call 4" BRR25102 Call ADAPTERS CAR22-R25 7/8" ROPE - 1" ROPE CAR25-R28 1" ROPE - 1 1/8" ROPE CAR25-R32 1" ROPE - 1 1/4" ROPE CAR25-R38 1" ROPE - 1 1/2" ROPE CAR25-T38 1 " ROPE - T 38 CAR25-T45 1" ROPE - T45 BAR25-R38 1" ROPE (FM) - 1 1/2" ROPE (M) BAR25-R32 1" ROPE (FM) - 1 1/4" ROPE( M) BAR25-R28 1" ROPE (FM) - 1 1/8" ROPE (M) BAR25-7811 1" ROPE (M) - 7/8" 11 TAPER BAR25-T38 1" ROPE (FM) - T 38 (M) BAR25-H 1" ROPE (FM) - H THD (M) $75.00 75.00 80.50 81.90 81.90 125.00 60.00 60.00 60.00 36.25 75.00 65.00 Button Types - Round, Conical, Ballistic, Parabolic. HOLE SAVER Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. HSBR25 HSSR25 BELL HOLE SAVER 1" ROPE SPEAR HOLE SAVER 1" ROPE $150.00 150.00 20

MINING AND CONSTRUCTION CONSUMABLES 21 1 ¼" ROUND Single Thread 1 ¼" ROUND Double Thread EXTENSION ROD 1" HEX 1 ¼" ROUND Male - Female 2' ER32-32R-24 $100.00 ER32-25H-24 $95.00 3' ER32-32R-36 110.00 4' ER32-32R-48 134.20 ER32-25H-48 128.10 ER32-32R-51MF $251.60 5' ER32-32R-63MF 260.60 6' ER32-32R-72 156.40 ER32-25H-72 156.60 ER32-32R-75MF 268.20 8' ER32-32R-96 181.80 ER32-25H-96 183.40 ER32-32R-99MF 349.30 10' ER32-32R-120 228.40 ER32-32R-120 $228.40 ER32-25H-120 213.40 ER32-32R-123MF 372.00 12' ER32-32R-144 266.00 ER32-32R-144 266.00 ER32-32R-147MF 401.00 14' ER32-32R-168 273.50 ER32-32R-168 273.50 SHANKED ROD 18" 7/8 X 4 1/4 1 X 4 1/4 2' DS78R32-18 $145.00 DS88R32-18 $115.00 30 DS78R32-24 155.00 DS88R32-24 124.30 3' DS78R32-30 165.00 DS88R32-30 127.20 4' DS78R32-36 170.00 DS88R32-36 139.40 5' DS78R32-48 185.00 DS88R32-48 149.50 8' DS88R32-72 172.60 10' DS88R32-96 211.90 12' DS88R32-120 225.90 HSBR32 HSSR32 HOLE SAVER BELL HOLE SAVER 1¼" ROPE SPEAR HOLE SAVER 1¼" ROPE $164.00 164.00 Threaded Steel & Bits 1 ¼" ROPE - R32-125 ROPE BAR32-R28 ADAPTERS 1 1/4" R (FM) - 1 1/8" R (M) BAR32-R25 1 1/4" ROPE (FM) - 1" ROPE( M) BAR32-R38 BAR32-T38 BAR38-R32 CAR25-R32 CAR28-R32 CAR32-R38 1 1/4" R (FM) - 1 1/2" R (M) 1 1/4" ROPE (FM) - T 38 (M) 1 1/2" R (FM) - 1 1/4" R (M) 1" ROPE - 1 1/4" ROPE 1 1/8" ROPE - 1 1/4" ROPE 1 1/4" ROPE - 1 1/2 ROPE CAR32-T38 1 1/4" ROPE - T 38 CAR32-T45 CAR32-T51 COUPLING CPLR32 1¼" ROPE COUPLING $40.20 1 1/4" ROPE - T45 1 1/4" ROPE - T51 $75.00 75.00 80.89 75.60 75.60 80.50 75.00 81.90 81.90 115.00 181.30 ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS REAMING BITS 1 1/2" BCR3238 $62.00 BBR3238 $63.30 1 5/8" BCR3241 62.70 BBR3241 64.50 1 3/4" BCR3245 67.10 BBR3245 71.10 BBR3245RT Call 1 7/8" BCR3248 73.40 BBR3248 75.10 BBR3248RT Call 2" BCR3250 80.40 BBR3250 79.50 BBR3250RT $167.60 2 1/4" BCR3257 91.20 BBR3257 87.30 BBR3257RT Call 2 1/2" BCR3264 131.30 BBR3264 116.60 BBR3264RT 127.70 3" BCR3276 165.60 BBR3276 151.00 BBR3276RT 172.20 BRR3276 $225.00 3 1/2" BCR3289 165.60 BBR3289 177.60 BRR3289 306.66 4" BCR32102 244.45 BBR32102 259.60 BRR32102 390.00 4 1/2" BRR32115 527.17 5" BRR32127 595.00 Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. 21

22 MINING AND CONSTRUCTION CONSUMABLES Threaded Steel & Bits T38 1½" ROUND Single Thread 1½" ROUND Double Thread EXTENSION ROD 1½" ROUND ALL THREAD 1½" ROUND Male - Female 4' ET38-38R-52MF $311.80 5' ET38-38R-64MF 324.00 6' ET38-38R-72 $236.70 ET38-38R-76MF 335.90 8' ET38-38R-96 279.30 ET38-96AT $223.89 ET38-38R-96MF 375.00 10' ET38-38R-120 287.30 ET38-38R-120T $326.70 ET38-38R120AT 324.40 ET38-38R-124MF 384.20 12' ET38-38R-144 336.10 ET38-38R-144T 372.40 ET38-38R-144AT 379.40 ET38-38R-148MF 436.90 14' ET38-38R-168 386.70 ET38-38R-168T 429.30 ET38-38R-168AT 433.10 ET38-38R-168MF 509.00 16' ET38-38R-192 498.60 ET38-38R-192T 583.90 18' ET38-38R-216 547.50 ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 2 1/4" BCT3857 $110.00 BBT3857 $87.30 BBT3857RT $140.90 2 1/2" BCT3864 138.10 BBT3864 127.70 BBT3864RT 168.20 2 3/4" BCT3870 153.30 BBT3870 151.00 BBT3870RT 192.60 3" BCT3876 174.30 BBT3876 165.30 BBT3876RT 226.70 3 1/2" BCT3889 214.60 BBT3889 212.00 BBT3889RT 256.00 REAMING BITS 4" BCT38102 269.60 BBT38102 309.90 BBT38102RT 329.00 BRT38102 $395.00 4 1/2" BBT38115 Call BRT38115 433.00 5" BBT38127 331.70 BRT38127 595.00 5 1/2" BBT38140 535.00 6" BRT38152 765.00 Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. STRIKING BAR 7/8 X 3¼ 7/8 X 4¼ 1 X 4¼ 1 X 6¼ SB77T38 SB78T38 SB88T38 SB89T38 BAR32-R28 ADAPTERS 1 1/4" R (FM) - 1 1/8" R (M) BAR32-R25 1 1/4" ROPE (FM) - 1" ROPE( M) $75.00 75.00 $95.00 $95.00 $102.26 $110.00 BAR32-R38 1 1/4" R (FM) - 1 1/2" R (M) 80.89 BAR32-T38 1 1/4" ROPE (FM) - T 38 (M) 75.60 COUPLING BAR38-R32 1 1/2" R (FM) - 1 1/4" R (M) 75.60 CPLT38 T38 COUPLING $56.20 CAR25-R32 1" ROPE - 1 1/4" ROPE 80.50 CAR28-R32 1 1/8" ROPE - 1 1/4" ROPE 75.00 HSBT38 HSST38 HOLE SAVER BELL HOLE SAVER T38 SPEAR HOLE SAVER T38 $182.00 $182.00 CAR32-R38 1 1/4" ROPE - 1 1/2 ROPE CAR32-T38 1 1/4" ROPE - T 38 CAR32-T45 1 1/4" ROPE - T45 CAR32-T51 1 1/4" ROPE - T51 81.90 81.90 115.00 181.30 22

MINING AND CONSTRUCTION CONSUMABLES 23 Threaded Steel & Bits T45 1¾" ROUND Single Thread 6' ET45-45R-72 $184.40 8' ET45-45R-96 250.00 EXTENSION ROD 1¾" ROUND Double Thread 1¾" ROUND All Thread 10' ET45-45R-120 396.10 ET45-45R-120T $441.80 ET45-45R-120AT $456.00 12' ET45-45R-144 468.70 ET45-45R-144T 497.10 ET45-45R-144AT 520.40 14' ET45-45R-168 565.00 ET45-45R-168T 602.80 ET45-45R-168AT 630.50 20 ET45-45R-240 784.30 ET45-45R-240T 899.50 COUPLING 1½" HEX Single Thread 4' ET45-38H-48 $210.00 5' 1¾" ROUND Male - Female 6' ET-45-38H-72 272.00 ET45-45R-76MF $512.20 8' ET45-45R-100MF 557.30 10' ET45-38H-120 396.10 ET45-45R-124MF 579.90 12' ET45-38H-144 468.70 ET45-45R-148MF 655.40 14' ET45-38H-168 565.00 ET45-45R-17SMF 839.80 20 ET45-38H-240 657.00 ET45-45R-244MF Call CPLT45 T45 COUPLING $81.20 ADAPTERS CAR25-T45 1" ROPE - T45 $125.00 CAR32-T45 1 1/4" ROPE - T45 115.00 CAR38-T45 1 1/2" ROPE - T 45 115.00 CAT38-T45 T 38 - T 45 107.30 CAT45-T51 T 45 - T 51 181.10 BAR38-T45 1 1/2" ROPE (FM) - T 45 (M) 105.00 BAT38-T45 T 38 (FM) - T 45 (M) 95.00 BAT45-T51 T45 (FM) - T 51 (M) 125.00 BS-R32-T45 125ROPE (FM) - T45 (M) 74.41 HSBT45 HSST45 HOLE SAVER BELL HOLE SAVER T45 SPEAR HOLE SAVER T45 $219.00 219.00 BS-T45-H18 BS-T45-H20 BS-T45-T51 T 45 (FM) - HL HL 1800 (M) T 45 (FM) - HL 2000 (M) T 45 (FM) - HL T51 (M) 80.00 85.00 85.00 ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 2 1/2 BCT4564 $115.70 BBT4564 $115.00 3" BCT4576 174.30 BBT4576 165.30 BBT4576RT $226.70 3 1/2" BCT4589 214.60 BBT4589 212.00 BBT4589RT 256.00 4" BCT45102 269.60 BBT45102 309.90 BBT45102RT 329.00 4 1/2" BCT45115 385.00 BBT45115 376.60 BBT45115RT 387.60 5" BBT45127 375.00 BBT45127RT 395.00 BRT45127 $490.00 5 1/2" BBT45140 470.00 6" BBT45152 545.00 BRT45152 765.00 8" BBT45203 640.00 BRT45203 Call Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. REAMING BITS 23

24 MINING AND CONSTRUCTION CONSUMABLES Threaded Steel & Bits T51 ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 3" BCT5176 Call BBT5176 $150.00 BBT5176RT Call REAMING BITS 3 1/2" BCT5189 $213.50 BBT51589 248.80 BBT5189RT Call 4" BCT51102 269.60 BBT51102 318.00 BBT51102RT $329.00 4 1/2" BCT51115 Call BBT51115 376.60 BBT51115RT 387.60 BRT51115 Call 5" BCT51127 Call BBT51127 415.70 BBT51127RT 446.10 BRT51127 Call 5 1/2" BBT51140 390.00 BBT51140RT Call BRT51140 Call 6" BBT51152 535.00 BBT51152RT 595.00 BRT51152 Call 8" BBT51203 Call Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. 1¾" ROUND Single Thread EXTENSION ROD 1¾" ROUND Male - Female 12' ET51-51R-144 $662.60 ET51-51R-148MF $903.80 14' ET51-51R-168 867.90 ET51-51R-172MF 1203.40 20 ET51-51R-216 1215.10 ET51-51R-220MF 1581.70 HSBT51 HSST51 HOLE SAVER BELL HOLE SAVER T51 SPEAR HOLE SAVER T51 $225.00 225.00 COUPLING CPLT51 T51 COUPLING $113.00 ADAPTERS CAR32-T51 1 1/4" ROPE - T51 $181.30 CAT38-T51 T38 - T51 181.90 CAT45-T51 T 45 - T 51 181.10 BAT38-T51 T38 (FM) - T 51 (M) 105.00 BAT45-T51 T45 (FM) - T 51 (M) 125.00 BS-R32-T51 125ROPE (FM) - T51 (M) 85.00 BS-T38-T51 T 38 (FM) - HL T 51 (M) 75.00 BS-T45-T51 T 45 (FM) - HL T51 (M) 85.00 Striking Bars & Shank Adapters STRIKING BAR SHANK 3/4 X 4¼ 7/8 X 3¼ 7/8 X 4¼ 1 X 4¼ 1 X 6¼ 7/8" ROPE SB68R22 $80.73 SB77R22 $83.10 SB78R22 $83.10 SB88R22 $83.10 1" ROPE SB68R25 80.73 SB77R25 80.73 SB78R25 83.10 SB88R25 85.80 SB89R25 $95.00 1¼"ROPE SB68R32 80.73 SB77R32 95.00 SB78R32 95.00 SB88R32 95.00 SB89R32 110.00 1½ROPE SB77R38 102.26 SB78R38 102.26 SB88R38 102.26 T38 SB77T38 95.00 SB78T38 95.00 SB88T38 102.26 EXTERNAL FLUSHING SHANK 7/8 X 4¼ 1 X 4¼ FLUSHING COLLARS External Flush Striking Bars 7/8" ROPE SB78R22EXT $83.10 SB-FC25 1" FLUSHING COLLAR, 7/8" BAR $165.00 1" ROPE SB78R25EXT 157.15 SB88R25EXT $157.15 SB-FC28 1 1/8" FLUSHING COLLAR, 1" BAR 125.00 24

MINING AND CONSTRUCTION CONSUMABLES 25 Threaded Steel & Bits 1 ½" ROPE - R38-150 ROPE EXTENSION ROD 1½" ROUND Single Thread 1½" ROUND Double Thread 1½" ROUND All Thread 10' ER38-38R-120 $225.00 ER38-38R-120 $225.00 ER38-38R-120AT $324.40 12' ER38-38R-144 213.00 ER38-38R-144 213.00 ER38-38R-144AT 379.40 14' ER38-38R-168 223.89 ER38-38R-168 223.89 ER38-38R-168AT 433.10 ROCK BITS CROSS BIT BUTTON BIT RETRAC BITS 2 1/4" BCR3857 BBR3857 BCR3857RT 2 1/2" BCR3864 $138.10 BBR3864 $127.70 BCR3864RT Call 2 3/4 BCR3870 153.30 BBR3870 151.00 3" BCR3876 174.30 BBR3876 165.30 BCR3876RT Call 3 1/2" BCR3889 214.60 BBR3889 212.00 BCR3889RT Call 4" BCR38102 269.60 BBR38102 309.90 BCR38102RT Call BRR38102 Call Button Types - Round, Conical, Ballistic, Parabolic. Face Design - Modified Chisel, Crown, Flat Face, Dome, Drop Center. ADAPTERS COUPLING REAMING BITS CAR25-R38 1" ROPE - 1 1/2" ROPE $81.90 CAR32-R38 1 1/4" ROPE - 1 1/2 ROPE 81.90 CAR32-R38SQ 1 1/4" ROPE - 1 1/2" ROPE SQUARE 110.00 CAR38-T45 1 1/2" ROPE - T 45 115.00 BAR25-R38 1" ROPE (FM) - 1 1/2" ROPE (M) 60.00 BAR32-R38 1 1/4" R (FM) - 1 1/2" R (M) 80.89 BAR38-R32 1 1/2" R (FM) - 1 1/4" R (M) 75.60 BAR38-T38 1 1/2" ROPE (FM) - T 38 (M) 95.00 BAR38-T45 1 1/2" ROPE (FM) - T 45 (M) 105.00 BAR38-R51 1 1/2" ROPE (FM) - 2" ROPE M) 115.00 CPLR38 1½" ROPE COUPLING $56.20 HOLE SAVER HSBR38 BELL HOLE SAVER 1½" ROPE $164.00 HSSR38 SPEAR HOLE SAVER 1½" ROPE 164.00 Striking Bars & Shank Adapters SHANK SEALS 5/16 7/16 1/2 9/16 5/8 3/4 CS8MM CS11MM CS13MM CS14MM CS16MM CS19MM Call $3.25 Call $3.25 Call $3.25 FLUSHING COLLAR SEALS SB-FC25-1 1" SEALS SB-FC28-1 1 1/8" SEALS Call Call For additional shank adapters see our website, www.crowdersupply.com 25

26 MINING AND CONSTRUCTION CONSUMABLES Betonamit Expansive Cracking Agent BETON-TYPR $73.50 BETONAMIT, a highly expansive cracking agent, is supplied in powder form, sealed in handy 5kg plastic packs. It must be mixed with a specific quantity of clean cold water and poured into holes pre-drilled in the material to be cracked. After a few hours reaction time BETONAMIT exerts a huge expansive pressure, which quickly increases to such a degree that any hard rock, standard or reinforced concrete can be broken. BETONA- MIT can be used both indoors and outdoors, in dry or humid conditions, even underwater. This information is provided as a service and should not be relied upon. Always make sure you read and follow all instructions provided with product. Visit our web site, CrowderSupply.com for PDF spec sheets. SCALING BARS ALUMINUM (1" SCH80) Includes Chisel PRICE BLACK PIPE (3/4" SCH40) Includes Chisel PRICE 7/8" HEX SOLID Includes Chisel 1" HEX SOLID Includes Chisel 5' SCB-AL-60 $41.00 SCB-BP-60 $30.95 SCB-22H-60 SCB-25H-60 6' SCB-AL-72 44.00 SCB-BP-72 37.15 SCB-22H-72 SCB-25H-72 7' SCB-AL-84 49.00 SCB-BP-84 43.35 SCB-22H-84 SCB-25H-84 8' SCB-AL-96 54.00 SCB-BP-96 49.55 SCB-22H-96 SCB-25H-96 10' SCB-AL-120 62.00 SCB-BP-120 61.90 SCB-22H-120 SCB-25H-120 12' SCB-AL-144 72.00 SCB-BP-144 74.30 SCB-22H-144 SCB-25H-144 14' SCB-AL-168 82.00 SCB-BP-168 86.70 16' SCB-AL-192 95.00 SCB-BP-192 99.05 SCB8073-1 1/8"Ø X.940 SHANK OFFSET CHISEL 17.70 SCB8071-7/8" HEX X.800 SHANK OFFSET CHISEL 17.70 SCB9000 POINT CHISEL 17.70 SCB9010 STRAIGHT CHISEL 17.70 Other Scaling Chisels Built to Your Specifications 26

MINING AND CONSTRUCTION CONSUMABLES 27 THREAD LUBE J751G Jet Lube J75 1 Gal $48.20 J752G Jet Lube J75 2 Gal $81.09 J755G Jet Lube J75 5 Gal $172.17 Air Hose & Accessories LINE OILER Aluminum - Pressure Feed J891G Jet Lube J89 1 Gal (pumpable) $43.21 J892G Jet Lube J89 2 Gal (pumpable) $78.74 J895G Jet Lube J89 5 Gal (pumpable) $167.00 JK1G KOPR-KOTE 1 Gal $53.14 JK2G KOPR-KOTE 2 Gal $100.30 JK5G KOPR-KOTE 5 Gal $199.21 LO-5PF 1/6 Pint 1/2" NPT $45.00 LO-10PF 1/3 Pint 3/4" NPT $52.00 LO-15PF 1/2 Pint 3/4" NPT $58.00 LO-30PF 1 Pint 1" NPT $74.00 All Steel - Joy Football Style - Constant Feed ECO1G Eco-Safe 1 Gal $49.50 ECO2G Eco-Safe 2 Gal $99.91 ECO5G Eco-Safe 5 Gal $163.31 MSDS Data Sheets available on our website: Crowdersupply.com LO-JOY-FB 1 Pint 1-1/4" NPT $285.00 RDO55G RDO5G RDO1G ROCK DRILL OIL ROCK DRILL OIL 55 GALLON ROCK DRILL OIL 5 GALLON ROCK DRILL OIL 1 GALLON Call $75.00 $22.00 AIR-H-19-50 AIR HOSE CONTRACTORS AIR HOSE 3/4" X 50' W/FITTINGS AIR-H-25-50 CONTRACTORS AIR HOSE 1" X 50' W/FITTINGS AIR-H-25-WB AIR-H-32-WB AIR-H-50-WB 1" WIRE BRAID 1¼" WIRE BRAID 2" WIRE BRAID AIR-H-12-WHP WHIP HOSE 1/2" X 6' UNIVERSAL CPLG AND SWIVEL WHIP CHECK $68.00 105.00 Call Call Call Call LO-60-CF 1 Quart 1-1/4" or 1-1/2" NPT $341.25 LO-120-CF 2 Quart 1-1/4" or 1-1/2" NPT $348.60 LO-180-CF 3 Quart 1-1/4" or 1-1/2" NPT $551.25 LO-230-CF 1 Gallon 2" or 2 1/2" NPT $855.00 LO-290-CF 1.5 Gallon 2" or 2 1/2" NPT $1002.75 LO-690-CF 3 Gallon 2-1/2 or 3" NPT $1601.25 Air King Universal Coupling WCSML WHIP CHECK 1/2" - 1¼" HOSE MADE IN USA $12.50 WCLRG WHIP CHECK 1½" - 3" HOSE MADE IN USA 18.50 Hose Ends Male NPT Ends Female NPT Ends 1/4" AMH $9.80 AMB1 $9.70 AMC1 $8.35 3/8" AM1 $6.20 AMB $8.35 AMC $8.35 1/2" AM5 $9.15 AM2 $7.25 AM3 $7.65 3/4" AM6 $6.25 AM7 $7.45 AM8 $7.35 1" AM11 $8.20 AM12 $8.25 AM13 $9.30 27

28 MINING AND CONSTRUCTION CONSUMABLES Darda ROCK SPLITTERS Enormous splitting force up to 413 tons Dust free and near silent operation Vibration free Light weight Precision work Always controllable For use in close quarters and hard to access places. Easy handling Phase 1, A hole of a precise diameter and depth is drilled into the material. The wedge set (one wedge and two counter wedges) is inserted into the drill-hole. Phase 2, The wedge is driven forward under hydraulic pressure, forcing the counter wedges apart with a force of up to 400 tons. The material splits within seconds. Phase 3, With enlarging counter wedges the split can be expanded to its maximum width. Reinforcing rods break or can be cut up with a suitable power tool, e.g. the Darda HCS 6 Combi- Shears. The power from within The stone and concrete splitting cylinder functions according to the proven wedge principle, whereby a strong force is applied in an extremely constricted space (from within). Rock and concrete put up considerable resistance to forces applied externally. As a result, conventional demolition methods such as hydraulic chisels or crushers are unable to demolish these materials with any worthwhile degree of control or precision. By comparison, the resistance of stone and concrete to force applied internally is 90% less, with the result that they disintegrate relatively easily. The right combination for every job Hydraulic power units with a variety of drive systems are available for different applications and requirements. They can produce up to 50 MPa (500 bar) maximum system pressure. All of our splitting cylinders can be combined with each of our power units. The high-quality hydraulic hose sets are designed for the strong pulsating pressures. 28

MINING AND CONSTRUCTION CONSUMABLES 29 Powered by 3.75 HP Briggs & Stratton Engine (5 Gal. Pump) Powered by 3 HP Air Motor, Large Reservoir (5 Gal. Pump) Powered by 1.5 HP Electric Motor, Single Phase, 60 cy, 3450 RPM, 110/220V, 5 Gal. Pump D01-12 Size 12 Darda Splitter - Complete Unit $19,460.00 $19,980.00 $19,650.00 D01-9 Size 9 Darda Splitter - Complete Unit $17,930.00 $18,450.00 $18,120.00 D01-2 Size 2 Darda Splitter - Complete Unit $16,440.00 $16,960.00 $16,630.00 D01 D02 D03 Hydraulic Power Unit Only, 3.75 Hp Briggs & Striation Gas Engine, 5 Gal Reservoir $3,770.00 Hydraulic Power Unit Only, 3 Hp Air Motor, 50-80 CFM at 100 PSI, 5 Gal Reservoir $4,290.00 Hydraulic Power Unit Only, 1.5 Hp Electric Motor Single Phase 110/220 volts, 5 Gal Reservoir $3,960.00 Dadra Rock & Concrete Splitting Cylinder Rock & Concrete Splitting Cylinders (No Power Pack) Includes Plug, Feathers, Whips, Quick-Connect Couplings & Covers Block Manifold Used to run multiple cylinders on one power pack Shipped with everything needed D00-12 Darda Splitting Cylinder, Size 12 $15,200.00 D016-13 Block Manifold 2 $1460 D00-9 Darda Splitting Cylinder, Size 9 $13,670.00 D016-14 Block Manifold 3 $1880 D00-2 Darda Splitting Cylinder, Size 2 $12,180.00 D016-15 Block Manifold 4 $2280 Plug Feathers Extension Hoses D010-2 Plug, Size 2 $394.00 D016-50 High Pressure Hose 50-1 Required $864.00 D010-3 Plug, Size 3 $486.00 D016-51 Low Pressure Hose 50-1 Required $226.00 D010-7 Plug, Size 7 $656.00 D016-26 Quick Connect Coupler 2 Required $97.60 each D010-8 Plug, Size 8 $692.00 D016-27 Coupler Cover 2 Required $4.60 each D010-9 Plug, Size 9 $636.00 D437 1/4 Female x 3/8 Male Reducer 2 Required $3.60 each D010-12 Plug, Size 12 $694.00 D438 Low Pressure Hose Connector $3.40 D011-2 Feather, Size 2 $418.00 Lubricants D011-3 Feather, Size 3 $510.00 D00-HPT Plug & Feather Lubricant 1/2 Pint Can $19.50 D011-7 Feather, Size 7 $668.00 D00-PT Plug & Feather Lubricant 1 Pint Can $35.00 D011-812 Feather, Size 8 and 12 $700.00 D014-3 Plug & Feather Lubricant 1/2 Pint Can, Case of 12 Cans $228.00 D011-9 Feather, Size 9 $668.00 D014-4 Plug & Feather Lubricant 1 Pint Can, Case of 12 Cans $414.00 D011-73 Enlarging Feather, Size 7 $656.00 D011-8123 Enlarging Feather, Size 8 and 12 $706.00 D011-93 Enlarging Feather, Size 9 $638.00 29

30 MINING AND CONSTRUCTION CONSUMABLES MWS83 Jack Leg Drill TUL2B and FL7 Feed Legs 30 This dependable drill is built to hit harder and penetrate rock faster than any other drill on the market. For years it has been the work horse of the mining and construction industries. The MWS83F can easily be converted from a Jack Leg drill to a Sinker drill - perfect for quarries and road construction projects. It is a favorite of both drillers and managers for it's power and low maintenance. Mid-Western is the OEM of the S83 line of Jack Leg Drills. We manufacture our parts and drills right here in the United States. Our castings are made right here in America and we do all of our own precision machining. It's no wonder why our drills perform better than any of the foreign competition. Many have tried to copy our drills but none have been able to equal our quality. We have been manufacturing reliable equipment for over 65 years and we carry on that tradition today. Proven Design Versatility The most popular Jack Leg drill on the market The OEM of the popular MWS83 Jack Leg Drill and TUL2B and FL7 feed Legs Precision manufactured parts that run better and wear down slower Backed by over 65 years of American-made experience Part No. Description Telescopic Feed Legs Available in telescopic and power retractable models Available in either a 7/8" or 1" chuck size Sold as either wet or dry (with or without water) Can easily be converted to a powerful sinker drill Affordability Mid-Western drills are high quality and competitively priced In-house manufactured parts last longer and perform better Piston Dia. Stroke Length Overall Length Total Weight (lbs) Air Hose Size Water Hose Size Chuck Size MWS83FC72 Drill Complete with 72" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,500 MWS83FC60 Drill Complete with 60" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,525 MWS83FC54 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,525 MWS83FC48 Drill Complete with 48" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,525 MWS83FC36 Drill Complete with 36" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,525 MWS83FC24 Drill Complete with 24" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,525 MWS83FD72 Drill Complete with 72" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,490 MWS83FD60 Drill Complete with 60" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,570 MWS83FD54 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,570 MWS83FD48 Drill Complete with 48" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,570 MWS83FD36 Drill Complete with 36" Leg and 3 2-1/2 27-1/4 72 1 1/2 1 $5,570 MWS83FD24 Drill Complete with 24" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,570 Power Retractable Feed Legs MWS83FA754 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 7/8 $5,855 MWS83FB754 Drill Complete with 54" Leg and Swivel 3 2-1/2 27-1/4 72 1 1/2 1 $5,890 MWS83FC Drill Only - Telescopic 3 2-1/2 27-1/4 72 1 1/2 7/8 $4,265 MWS83FD Drill Only - Telescopic 3 2-1/2 27-1/4 72 1 1/2 1 $4,310 MWS83FA Drill Only - Power Retractable 3 2-1/2 27-1/4 72 1 1/2 7/8 $4,680 MWS83FB Drill Only - Power Retractable 3 2-1/2 27-1/4 72 1 1/2 1 $4,715 MWS83DA Sinker Drill - Dry 3 2-1/2 27-1/4 72 1 1/2 7/8 $4,000 MWS83DB Sinker Drill - Dry 3 2-1/2 27-1/4 72 1 1/2 1 $4,000 MWS83WA Sinker Drill - Wet 3 2-1/2 27-1/4 72 1 1/2 7/8 $4,000 MWS83WB Sinker Drill - Wet 3 2-1/2 27-1/4 72 1 1/2 1 $4,000 Price

MINING AND CONSTRUCTION CONSUMABLES TUL2B and FL7 Feed Legs 31 TUL2B Feed Leg Telescopic Feed Leg capable of up to 562 lbs. of force. Compatible with our MWS83FC and MWS83FD Jack Leg drills. Available in several sizes up to 72'' (125'' fully extended). Feed Leg also features an adjustable handle. FL7 Feed Leg Power Retractable Feed Leg capable of up to 531 lbs. of force. Compatible with our MWS83FA and MWS83FB Jack Leg drills. Available in several sizes up to 54'' (126'' fully extended). Feed Leg also features an adjustable handle. Proven Design The most popular Feed Leg on the market to accompany the best Jack Leg drills The OEM of both the TUL2B and FL7 Feed Leg models Precision manufactured parts that run better and wear down slower Backed by over 65 years of American-made experience Versatility Available in telescopic and power retractable models Available in several different lengths Adjustable handle allows personal comfort for any driller Affordability Mid-Western Feed Legs are the highest quality equipment at the best price In-house manufactured parts last longer and perform better Part No. Description Standard Length Extended Length Price TUL2B24 Telescopic Feed Leg 24 53-3/8 $1,125 TUL2B36 Telescopic Feed Leg 36 71-3/8 $1,125 TUL2B48 Telescopic Feed Leg 48 89-3/8 $1,125 TUL2B54 Telescopic Feed Leg 54 $1,125 TUL2B60 Telescopic Feed Leg 60 107-3/8 $1,125 TUL2B72 Telescopic Feed Leg 72 125-3/8 $1,044 FL754 Power Retractable Feed Leg 54 126 $1,050 Accessories Part No. Description Price MWLO7B Air Line Lubricator $350.00 MWS83FM Muffler $355.00 FL990X Swivel Assembly $305.71 MWS83SKIT Sinker Drill Kit $240.00 TUL2BKIT TUL2B Repair Kit $23.43 FL7KIT FL7 Repair Kit $18.00 TFL14KIT TFL14 Repair Kit $30.00 Parts Breakdowns available online at www.crowdersupply.com 31

32 MINING AND CONSTRUCTION CONSUMABLES COBRA COMBI GAS POWERED BREAKERS/DRILLS The Atlas-Copco Cobra Combi is a successor to the earlier and well-known model Cobra 149 and the Pionjar Gas Drills. At the same time, it is unique in its design since several improvements have been made to meet both environmental requirements from authorities as well as operators demand of ergonomic design and user comfort. CLEANER EMISSIONS, LOWER VIBRATIONS, LESS NOISE It is not only the design that is new on the Cobra Combi. Firstly, the noise level is lowered from 114 to 110 db thanks to a new muffler and it is thereby fulfilling the European Noise Emission Directive (NED). Secondly, new vibration dampened handles reduces vibration levels from 8 to 5 m/s². Also, with a new carburetor and a catalytic converter, the emissions are cleaner and meet the tough US emission regulations, EPA1. Further, with a new choke control, new carburetor and user-friendly start instructions, Cobra Combi is easy to use. The new gas control gives the operator better control of the speed and enhance the precision when operating. TECHNICAL SPECIFICATIONS Weight Length Depth Width over handles Tool shank 55 lbs 28.81 in 11.06 in Sound level (Acc. to ISO 3744) Vibrations level (Acc. to ISO 8662) 23.03 in 7/8-4 1/4 110 db 5 m/s2 ENGINE Type Power Cooling system Starter system Recommended fuel Oil type Oil mix Fuel capacity Fuel consumption 185 cc 1-cylinder, 2-stroke 1kW Forced air Recoil starter Unleaded Atlas Copco two-stroke oil or similar 2% 1:50 0.31 US Gallon 0.36 US Gallon/hour Impact rate CAPACITY Drilling speed (In granite, 1 21/64 drill) Max drilling depth 2600 BPM 11.8 in/min2 6.5 ft Cobra Combi - Combination Breaker/Drill Model Part Number Tool Size Price Cobra Combi 2010 8318 0800 08 7/8" x 4-1/4" Chuck $5040 A Multi-Purpose Too With a range of 18 different tools, you can use the Cobra Combi for everything from cutting and breaking, to drilling, driving and compacting. So whether you need to just break a small patch of concrete, or split a rock, you can get the job finished with a gas-powered machine in the same time it takes just to set up a compressor and hoses. Breaking Concrete Cutting Asphalt Drilling Digging Splitting Rocks 32

MINING AND CONSTRUCTION CONSUMABLES 33 COBRA PRO The Cobra Pro breaker is the heavy hitter in the range. Clocking up an incredible 44 ft/lb at the tool tip, it delivers almost twice the impact energy of other petrol-driven breakers on the market. In fact, it offers the same power-to weight ratio as many pneumatic or hydraulic breakers, but without being tied down to a power source or hoses. The Cobra Pro breaker helps you get the job done faster. This is due to a combination of high percussive energy and high blow frequency. Put them together, and you ll see why the Cobra Pro breaker is such a productive machine. With an extensive range of tools, you can use the Cobra Pro for everything from cutting and breaking, to driving and compacting. Hard hitting, 44 ft/lb performance. Ideal for a wide range of applications such as; breaking concrete, cutting asphalt, tamping ballast, digging and other tasks. Extremely low vibrations: only 2.3 m/s2. Easy maintenance and service. EPA 1 approved. Model Part Number Tool Size Price Cobra PRO 8318 0700 41 1-1/8" x 6" Chuck $4,950 Cobra PRO 8318 0700 37 1-1/4" x 6" Chuck $4,950 COBRA TT The Cobra TT is specially designed for tie tamping. Its portability and flexibility eliminate traffic disruptions caused from local ballast compunction. For maximum comfort, the Atlas Copco Hand and Arm Protection System (HAPS) achieves a very low vibration level. For optimal tie tamping and other maintenance jobs, the Cobra TT is right on track. Specially developed for tie tamping Impact energy of 29 ft/lb Unique vibration dampening Environmental friendly Model Part Number Tool Size Price Cobra TT 8318 0700 45 1-1/4" x 6" Chuck $5,355 Cobra TT Tie Tamper 8318 0700 49 1-1/8" x 6" Chuck $5,355 Feather & Wedge Set Part No. Description Dia Weight Price 9245 2813 51 Feather & Wedge Set 1.34 4.6 lbs. $90.86 Additional sizes available, please call for pricing and availability. 33

34 MINING AND CONSTRUCTION CONSUMABLES Crowder Supply Co, Inc. has built a machining cell at its Denver plant using the newest CNC machines and automation. This allows us to supply your custom needs on a timely basis. We can manufacture your precision accessories from top quality raw material and provide heat treatment. In addition to supplying parts for the mining and construction industries, our capabilities allow us to manufacture parts for all industrial applications with an emphasis toward long production runs. Our high level of automation means: High Product Quality High level of Quality Control Competitive Pricing Fast Turnaround Times FIN HOE MUCKING SCOOP EXPANSION SHELLS DOWN THE HOLE BITS DRAG BITS ROOF BOLT BITS HARD HATS MINERS LIGHTS MINERS BELTS BUTTON BIT GRINDING CUPS BOLT CENTRALIZERS SLUSHER PINS SLUSHER BLOCKS BETONAMIT Cracking Agent HOLE PLUGS FEATHER & WEDGE ALUMINUM CONDUIT COUPLINGS DOWN HOLE SHOCK SUBS TRI CONE BITS WICKET PINS ADJUSTABLE COLUMN TOPS CENTRALIZER SUBS CENTRALIZER CUSTOM MACHINING 34

888-883 883-5144 CROWDERPNEUMATICS.COM COMPLETE LINE OF CHICAGO PNEUMATIC TOOLS PAVING BREAKERS ROCK DRILLS CHIPPING HAMMERS Page 2 Page 6 Page 8 RIVET BUSTERS SCABBLERS SAWS & PUMPS Page 5 Page 11 Page 11 BACKFILL TAMPERS IMPACT WRENCHES Page 13 Page 15 CROWDERPNEUMATICS.COM SEPT 2010

2 888-883 883-5144 CROWDERPNEUMATICS.COM PAVING BREAKERS BREAKERS - 25 LB CLASS The CP 25 lb class demolition tools are lightweight yet rugged. They have been designed for light to medium construction and plant maintenance work, such as light demolition of floors, pavement, macadam, frozen ground and masonry walls. These tools are also very popular for bridge deck jobs. Alloy steel forgings - provide excellent durability. Four-bolt back head design - withstands rugged use. Integral oilers - provides continuous lubrication. CP 0112 S equipped with a Hushed Power muffler reduces sound level. CP 0112-EX has an extended handle for trench work. Chuck Size (inch) VRhandles incl. Part Number Description Weight (lbs) Air Consumption (cfm) Blows per Minute Retainer type Muffler incl. Price 8900 0030 23 CP 0112 30.0 1 x 4 1/4 45 1800 Latch - - $820 8900 0030 24 CP 0112 EX 33.0 1 x 4 1/4 45 1800 Latch - - $880 8900 0030 25 CP 0112 S 37.0 1 x 4 1/4 45 1800 Latch Yes - $915 R092500 Retainer Latch Kit $423.60 R070111 Back Head Bolt $8.04 BREAKERS - 35 LB CLASS P006099 Back Head Bolt Nut $1.00 All features of 25 lb Breaker class Heavy-duty front head springs (CP 1210) - reduces reaction back to operator CP 1210-S equipped with a 'Hushed Power' muffler - reduces sound level Vibration reduced handle (VR Series) available on CP 1210 Air Consumption (cfm) VRhandles incl. Weight Chuck Size Blows per Retainer Muffler Part Number Description (lbs) (inch) Minute type incl. Price 8900 0030 01 CP 1210 42.0 1 x 4 1/4 48 1500 Latch - - $790 8900 0030 09 CP 1210 S 54.0 1 1/4 x 6 48 1500 Latch Yes - $890 8900 0030 07 CP 1210 S 54.0 1 1/8 x 6 48 1500 Latch Yes - $890 8900 0030 03 CP 1210 S 44.0 1 x 4 1/4 48 1500 Latch Yes - $890 8900 0030 10 CP 1210 VRS 59.0 1 1/4 x 6 48 1500 Latch Yes Yes $1060 8900 0030 08 CP 1210 VRS 59.0 1 1/8 x 6 48 1500 Latch Yes Yes $1060 8900 0030 05 CP 1210 VRS 53.0 1 x 4 1/4 48 1500 Latch Yes Yes $1060 See Page 4 for Spare Parts and Kits 2 CROWDERPNEUMATICS.COM

888-883 883-5144 CROWDERPNEUMATICS.COM 3 BREAKERS - 60 LB CLASS Part Number Description Weight (lb) Blows per minute Retainer type Muffler incl. Price T022074 CP 1230 65.0 1 1/4 x 6 64 1300 Latch - - $840 T022073 CP 1230 65.0 1 1/8 x 6 64 1300 Latch - - $840 T022159 CP 1230 S 68.0 1 1/4 x 6 64 1300 Latch Yes - $945 T022158 CP 1230 S 68.0 1 1/8 x 6 64 1300 Latch Yes - $945 T024239 CP 1230 VRS 76.0 1 1/4 x 6 64 1300 Latch Yes Yes $1130 T024227 CP 1230 VRS 76.0 1 1/8 x 6 64 1300 Latch Yes Yes $1130 BREAKERS - 90 LB CLASS The CP 1230 breakers are heavy duty, robust tools well suited for medium demolition work in construction and plant maintenance. All Features of 35 lb Breakers CP 1230 with four-bolt back head Heavy-duty front head springs - reduces reaction back to operator Reversible piston - reduces maintenance cost Air inlet swivel - for easy maneuverability Hushed Power' version - CP 1230-S is equipped with mufflers Vibration reduced handle (VR Series) available on CP 1230 Chuck size Air Consumption (cfm) VRhandle s incl. The CP 1240 demolition tools are designed to deliver the power and durability necessary for a variety of construction and plant maintenance applications such as breaking heavy concrete, reinforced concrete, frozen ground, macadam, boulders and pavement. Four-bolt back head - for rugged use Integral oiler - continuous lubrication Heavy-duty front head springs - reduces reaction back to operator Reversible piston - reduces maintenance cost Air inlet swivel - for easy maneuverability 'Hushed Power' versions - CP 1240-S are equipped with mufflers Vibration reduced handle (VR Series) available on CP 1240 Chuck size Air Consumption (cfm) Blows per minute VRhandles incl. Part Weight Retainer Muffler Number Description (lb) type incl. Price T022076 CP 1240 83.0 1 1/4 x 6 84 1200 Latch - - $920 T022075 CP 1240 83.0 1 1/8 x 6 84 1200 Latch - - $920 T022222 CP 1240 S 86.0 1 1/4 x 6 84 1200 Latch Yes - $1025 T022221 CP 1240 S 86.0 1 1/8 x 6 84 1200 Latch Yes - $1025 T024535 CP 1240 VRS 95.0 1 1/4 x 6 84 1200 Latch Yes Yes $1230 T024536 CP 1240 VRS 95.0 1 1/8 x 6 84 1200 Latch Yes Yes $1230 Breakers can be ordered with mufflers (S) or mufflers can be ordered separately See Page 4 for Spare Parts and Kits Vibration reduced models (VRS) are also silenced. 1210 SVR 1230 SVR 1240 SVR CROWDERPNEUMATICS.COM 3

4 888-883 883-5144 CROWDERPNEUMATICS.COM SPIKE DRIVER Part Number Description Weight (lb) Chuck size Air Consumption (cfm) Blows per minute Retainer type T021612 CP 1230 SPDR 60 63 - $1330 T021613 CP 1230 S SPDR 60 63 YES $1400 3303 0050 56 Side Bolt Kit includes 2 of each front head bolt, spring, lock nut and bolt nut $64.53 R085573 Driving Block 6-3/16 $111.58 R085573M Driving Block 5-13/16 $79.35 T021042 CP 1240 SPDR 81 81 $1400 T021041 CP 1240 S SPDR 81 81 YES $1470 3303 0050 57 Side Bolt Kit includes 2 of each front head bolt, spring, lock nut and bolt nut $87.40 R043649 Driving Block 6-3/16 $111.58 R147441 Driving Block 11-3/16 $139.85 REPLACEMENT PARTS Muffler incl. Price Retainer latch kits includes: Latch, latch bushing, bolt or pin, and other parts needed to safely and easily replace worn or broken latches CP 1210 CP 1230 CP 1240 Complete Kit 3303 0050 43 $43.03 3303 0050 54 $56.49 3303 0050 55 $67.23 Contents Retainer Latch R092493 34.93 R092493 34.93 F036265 Retainer Latch Bushing R048540 11.68 R055818 13.45 R050894 43.03 8.04 Roll Pin 10 dia x 55 lg 0108 1395 00 3.47 Plunger Spring R086982 1.48 R086982 1.48 R092911 Latch Plunger R092497 1.00 R092497 1.00 R092910 Latch Bolt R076853 13.45 R076853 Nut P008999 2.53 P008999 Latch Bolt Bushing R076562 6.07 R076562 1.48 2.98 13.45 2.53 6.07 Side bolt kits includes: Two each of side rod bolts, nuts, springs and lock washers. CP 1210 Steel Spring 1 CP 1210 PU Spring 1-1/8 & 1-1/4 CP 1230 CP 1240 Complete Kit 3303 0050 44 $61.83 3303 0050 45 $47.06 3303 0050 56 $64.53 3303 0050 57 $87.40 Contents: 2 x Side Bolt R110217 29.59 R110217 29.59 R047970 16.15 F037790 2 x Side Bolt Nut R110218 5.24 R110218 5.24 R005721 4.96 F037789 2 x Lock Washer R041073 9.42 R041073 9.42 R090584 3.64 R096059 21.50 6.07 3.91 2 x Front Head Spring R093698 36.34 3303 0050 33 12.78 R047971 20.17 R092915 25.57 4 CROWDERPNEUMATICS.COM

888-883 883-5144 CROWDERPNEUMATICS.COM 5 Rivet Busters Pound for pound, there is no hammer with more hitting power than a rivet buster. Even a paving breaker would need to be at least twice as heavy to deliver an equivalent blow. This super-power can still be controlled thanks to low blow frequency and teasing throttle. That s why the rivet buster is one of the favorite tools of demolition contractors in the US. Users have discovered many new applications for rivet busters for working in both concrete and steel. No longer is the buster used exclusively by iron workers for forming and cutting rivets, but it has now found its way into the hands of operators who need the most powerful tool for the job. Concrete Applications Bridge deck work, where weight of breakers is restricted De-capping foundation pillars, where concrete is very hard Medium to heavy concrete demolition As an alternative to paving breakers where high hitting power is required but applied in a restrained space or working horizontally. Metal Applications Cutting and removing large rivets and bolts with narrow chisels and backout punch, or other special steel and accessories Cutting metal tanks or plates (3/16 thick, 5mm) with ripper chisel Industrial applications such as foundries or the petrochemical industry with beryllium chisels 4611-P 11 Open Handle 4608P 8 Open Handle 4611D 11 D-Handle 4608D 8 D-Handle Teasing throttle for progressive hitting frequency New buffer ring is now 90 durometer rubber for extra gives better control of such a powerful machine life Special Boyer valve makes the cylinder stroke effective Stepped piston to prevent accidental ejection of the longer for more hitting power piston Boyer valve s high quality deign makes the blow Choice of cylinders 11 or 8 more consistent Choice of handle Open grip with outside trigger or Forged steel handle for long life in rugged conditions D Handle with inside trigger Stepped piston of hardened steel 1/2 inlet bushing Air Blows Weight consumption Stroke per Part Number Description lb cfm minute Retainer type Price 9245 9999 17 CP4160 25.0 44 6 1100 US standard (with spring) $940 8900 0001 52 CP 4611 DULER 34.0 40 11 720 US standard (with spring) $1125 8900 0001 51 CP 4608 DUSER 31.0 38 8 1080 US standard (with spring) $1000 8900 0001 50 CP 4611 PULER 33.0 40 11 720 US standard (with spring) $1125 8900 0001 49 CP 4608 PUSER 30.0 38 8 1080 US standard (with spring) $1000 Consumables and Accessories for Rivet Busters using Jumbo Steel Part No Description for 4608 & 4611 Price Part No Description for 4160 Price P072333 Lower Sleeve $13.39 9247 9855 20 Lower Sleeve $12.25 P156988 Upper Sleeve 15.45 9247 9855 10 Upper Sleeve 15.00 3303 0051 03 Rubber Bumper 1.75 9247 9855 30 Rubber Bumper 3.50 P073942 Retainer Spring 1.80 9247 9854 90 Retainer Spring 1.80 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com See our Air Hose & Accessories under Crowder Supply page 27 CROWDERPNEUMATICS.COM 5

6 888-883 883-5144 CROWDERPNEUMATICS.COM SINKER DRILLS Chicago Pneumatic Sinker Drill s robust design incorporates a side exhaust and a 'flat back' that makes them easy to handle in quarry, mine and general excavating work. The design also provides a main valve and cylinder porting concept that helps maintain constant drilling speed throughout a long service life. Working parts are constantly protected with an effective lubrication system. Forged steel housings withstands rugged use Cushioned piston reduces shock Multi-position throttle for easy starting of holes Blower lever for deep hole cleaning (except CP-0022) Integral oiler provides continuous lubrication Air inlet swivel improves maneuverability Chuck size (inch) Air consumption (cfm) Blows per minute Retainer type Comments Price Part Number Description Weight (lb) 8900 0020 01 CP 0022 28.0 7/8x3 1/4 54 2200 Spring VR handles kit $1350 8900 0020 02 CP 0022 28.0 7/8x4 1/4 54 2200 Spring VR handles kit $1350 T022319 CP 0032 55.0 1x4 1/4 103 2200 Latch Beavertail T022318 CP 0032 55.0 7/8x3 1/4 103 2200 Latch Beavertail T022117 CP 0032 55.0 7/8x4 1/4 103 2200 Latch Beavertail T025431 CP 0032 S 56.0 7/8x4 1/4 103 2200 Latch Beavertail VR handles kit $1530 VR handles kit $1530 VR handles kit $1530 Inc. Muffler -- 3dBA $1695 R125569 Muffler Kit $480.02 R147457 Wet Kit $156.00 T022259 CP 0069 60.0 1x4 1/4 130 1900 Latch Inc. water kit $1710 Beavertail T006661 CP 0069 60.0 7/8x4 1/4 130 1900 Latch VR handles kit $1710 Beavertail T025423 CP 0069 WET 60.0 7/8x4 1/4 130 1900 Latch VR handles kit $1815 Beavertail Z6544438 Wet Kit $247.43 R154915 VR Handles Kit for 0022, 0032 and 0069 Rock Drill $310.63 CP 0022 Sinker Drill CP 0032A Sinker Drill CP 0069 Sinker Drill Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com 6 CROWDERPNEUMATICS.COM

888-883 883-5144 CROWDERPNEUMATICS.COM 7 ROCK DRILLS / CHIPPING HAMMERS These versatile tools are both a drill and a chipping hammer. With the CP 14, CP 9A & F, a push of the rotation release button easily and quickly converts the tool to a chipping hammer. The CP-0009 and CP-0014RR rotary hammers are designed for a wide variety of constructions and maintenance applications such as driving or setting masonry anchors and drilling holes in concrete, bricks or rock. As a hammer, these tools can be used for chipping, scarifying, scaling and cleaning welds. Part Number Excellent power-to-weight ratio helps drill holes faster and easier than comparable electric rotary hammers Built-in oiler provides continuous lubrication Teasing throttle for precise control Rotation release button converts tool to a hammer (CP 14, CP 9A & F) Cushioned piston for smooth operation, long life 'Hushed Power' muffler available to reduce noise (CP 9CS & ES) Description Weight lb Chuck size inch Air consumption cfm Blows per minute Retainer type Comments Price T022083 CP 0009 A 8.0 3/4x3 3/4 20 3400 Quick change Rotation $690 release button Z0027413 CP 0009 AC 8.0 3/4x3 3/4 20 3400 Quick change $655 T022322 CP 0009 CS 9.9 14-3/4 Rnd 20 3420 Quick change Muffler Incl. $730 T022180 CP 0009 E 8.8 3/4x3 3/4 20 3420 Quick change $825 T022330 CP 0009 ES 9.9 14-3/4 20 3420 Quick change Muffler Incl. $900 T022511 CP 0009 F 8.0 Spline 20 3400 Quick change Rotation release button $690 Z8375412 Complete Retainer Sleeve - quick change retainer, retainer plate, retainer ring & dust excluder $52.46 Z8366412 Complete Round Chuck - round chuck, 17 retainer balls, 4 steel balls, & sleeve retainer spring $137.15 Z8368412 Complete Hex Chuck - hex chuck, 17 retainer balls, 4 steel balls & sleeve retainer spring $139.85 Z8369412 Complete Spline Chuck - spline chuck, 17 retainer balls, 4 steel balls, & sleeve retainer spring $169.45 F826972 Complete Muffler - muffler, cap screws and washers $77.97 R137586 Adaptor CP9 to SDS Plus $119.48 T022173 CP 0014 RR 15.0 7/8x3 1/4 38 2500 Spring $1200 T022321 CP 0014 RRBS 15.4 7/8x3 1/4 46.6 2520 Spring $1350 F827044 Muffler Complete - includes: muffler, lock nut, washer and cap screws $381.87 F826645 Air Inlet Bushing $25.57 F827380 Hose Tail $4.84 R085600 Chuck $169.45 R085601 Chuck Sleeve $63.20 CP 0009 Right hand rotation With an adaptor, can be used with electric hammer drill bits Spline version available Adapter (R137586) round to SDS Electric hammer tools are available on our website: www.crowdersupply.com CP 0014 Superior drilling rates Greater drilling capacity compared to plug hole drills Designed for production drilling of small holes CROWDERPNEUMATICS.COM 7

8 888-883 883-5144 CROWDERPNEUMATICS.COM Chipping Hammers CP 0012 Optimum power-to-weight ratio for a good balance between hitting power and easy handling Straight forward design for easy maintenance and repair Handle design similar to the well-known CP 0009 Teasing throttle and an air cushioned piston give the operator precise control Muffler assembly as standard Rugged construction, hardened steel cylinder and handle Choice of bushing:.680 round chisel rotates freely or.580 hex prevents chisel rotation WHIP HOSE IS NOT INCLUDED WITH CHIPPING HAMMER Part Number Description Weight (lb) Chuck size Air consumption (cfm) Stroke Blows per minute Retainer type 8900 0001 03 CP 0012 12.0.580"Hex 20 2 2600 US standard Yes $300 Muffler incl. Price 8900 0001 02 CP 0012 12.0.680"Rnd 20 2 2600 US Standard Yes $300 9246 0203 63 Whip Hose Assembly $40 C8788859 Ball Type Screw On Retainer $39.12 P107243 Sleeve Retainer Complete (includes Lock Spring) $63.20 H3437857 Lock Spring $1.88 CP 0017 Designed for years of trouble-free service Closed aluminum handle with inside trigger for maximum effectiveness and operator comfort Oil-resistant neoprene exhaust deflectors Available with choice of.580 hex or.680 round bushings Vibration-reduced and muffler included WHIP HOSE IS NOT INCLUDED WITH CHIPPING HAMMER Part Number Description Chuck size Air consumption (cfm) Stroke Blows per minute Retainer type Price 8900 0001 37 CP 0017 SVR 3H.580"Hex 26 3 1920 US Standard $850 8900 0001 36 CP 0017 SVR 3R 680"Rnd 26 3 1920 US Standard $850 9246 0203 63 Whip Hose $40.00 P144441 Retainer Oval Collar, Round Shank $73.95 P145545 Retainer Oval Collar, Hex Shank $118.32 C8792840 Retainer Quick Change, Off-Center $91.41 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com 8 CROWDERPNEUMATICS.COM

888-883 883-5144 CROWDERPNEUMATICS.COM 9 CP 4123 Classic simplate valve Heat treated cylinder Now with spline lock instead of clip locking mechanism CP 4125 Unique ring valve as standard for harder blow in tough applications or dirty environments Chrome plated cylinder for extra durability Spline locking to prevent loosening of handle or cylinder CP 4123 and 4125 Powerful, yet compact and lightweight Rugged construction, hardened steel cylinder and handle Teasing throttle for precise control Open grip handle with self closing outside trigger Available in 2, 3, or 4 cylinder stroke versions Choice of bushing:.680 Round chisel rotates freely or.580 hex prevents chisel rotation WHIP HOSE NOT INCLUDED WITH CHIPPING HAMMER Part Number Description Weight (lb) Chuck size Air consumptio n (cfm) Stroke Blows per minute Retainer type 8900 0001 05 CP 4123 2H 13.0.580"Hex 25 2 2400 US Standard (with spring) - $380 8900 0001 04 CP 4123 2R 13.0.680"Rnd 25 2 2400 US Standard (with spring) - $380 8900 0001 07 CP 4123 3H 14.3.580"Hex 26 3 1920 US Standard (with spring) - $380 8900 0001 06 CP 4123 3R 14.3.680"Rnd 26 3 1920 US Standard (with spring) - $380 8900 0001 09 CP 4123 4H 15.5.580"Hex 27 4 1500 US Standard (with spring) - $400 8900 0001 08 CP 4123 4R 15.5 680"Rnd 27 4 1500 US Standard (with spring) - $400 Muf fler incl. Price 9246 0203 63 Whip Hose $40.00 P107243 Retainer & Lock Spring $63.20 P070994 Lock Spring $1.80 8900 0001 11 CP 4125 2H 13.0.580"Hex 26 2 2400 US Standard (with spring) - $660 8900 0001 10 CP 4125 2R 13.0 680"Rnd 26 2 2400 US Standard (with spring) - $660 8900 0001 13 CP 4125 3H 14.3.580"Hex 27 3 1920 US Standard (with spring) - $660 8900 0001 12 CP 4125 3R 14.3 680"Rnd 27 3 1920 US Standard (with spring) - $660 8900 0001 15 CP 4125 4H 15.5.580"Hex 28 4 1500 US Standard (with spring) - $660 8900 0001 14 CP 4125 4R 15.5 680"Rnd 28 4 1500 US Standard (with spring) - $660 9246 0203 63 Whip Hose $40.00 P107243 Retainer and Lock Spring $63.20 P070994 Lock Spring $1.80 CROWDERPNEUMATICS.COM 9

10 888-883 883-5144 CROWDERPNEUMATICS.COM CP 4130 Locking mechanism with four high strength 1/2 bolts D handle with outside trigger and extra safety mechanism Muffler assembly as standard Simplate valve for smooth operation Strong and reliable Available in 3 or 4 cylinder stroke versions Choice of bushing:.680 round chisel rotates freely or.580 hex prevents chisel rotation CP 4131 Excellent power-to weight ratio helps drill holes faster and easier than comparable electric rotary hammers Built-in oiler provides continuous lubrication Teasing throttle for precise control Cushioned piston for smooth operation and long life CP 4132 Four high strength 1/2 bolts locking mechanism D Handle with inside trigger Standard retainer Strong and reliable Available in 3 or 4 cylinder stroke versions Choice of bushing:.680 round chisel rotates freely or.580 hex prevents chisel rotation WHIP HOSE NOT INCLUDED SOLD SEPERATELY Part Number Description Weight (lb) Chuck size Air consumption (cf m) Stroke Blows per minute Retainer type 8900 0001 17 CP 4130 3H 18.5.580"Hex 26 3 1920 US Std w/ spring Yes $380 8900 0001 16 CP 4130 3R 18.5 680"Rnd 26 3 1920 US Std w/ spring Yes $380 8900 0001 19 CP 4130 4H 19.5.580"Hex 27 4 1500 US Std w/ spring Yes $380 8900 0001 18 CP 4130 4R 19.5 680"Rnd 27 4 1500 US Std w/ spring Yes $380 P107243 Retainer & Lock Spring $63.20 P070994 Lock Spring $1.80 9246 0203 63 Whip Hose $40.00 Muffler incl. Price 8900 0001 34 CP 4131 3H 19.0.580"Hex 26 3 1900 Ball type retainer Yes $430 8900 0001 33 CP 4131 3R 19.0.680"Rnd 26 3 1900 Ball type retainer Yes $430 Z8389857 Retainer Complete includes: Retainer, 6 Steel Balls, Spring, Retainer Sleeve and External Circlip $147.90 Z8754857 Steel Balls Set of 6 $13.17 9246 0203 63 Whip Hose $40.00 9245 9998 00 CP 4132 3R 15.0.680 Rnd 33.23 3 1800 US Std w/ spring - $380 9245 9997 99 CP 4132 3H 15.0.580 Hex 33.23 3 1800 US Std w/ spring - $380 9245 9998 98 CP 4132 4R 15.0.680 Rnd 33.23 4 1800 US Std w/ spring - $380 9245 9998 80 CP 4132 4H 15.0.580 Hex 33.23 4 1800 US Std w/ spring - $380 9246 0203 71 Hose Swivel 7/8-24 inlet thread with 3/8 male pipe thread $25.75 9247 9853 50 Retainer Oval Collar $58.67 9246 0208 36 Lock Spring $1.80 9246 0203 63 Whip Hose $40.00 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com 10 CROWDERPNEUMATICS.COM

888-883 883-5144 CROWDERPNEUMATICS.COM 11 SLUDGE PUMPS The CP 77 sludge pump easily handles water containing 15% solids and particles up to 1 (25 mm) in size. It is suitable for pumping seawater and certain corrosive chemicals. Operates on venturi/ejector principle - no motor or diaphragm to wear out. Exhaust muffler - reduces sound level NOT INTENDED FOR PUMPING FLAMMABLE FLUIDS Part Number Description T024005 CP 0077 Sludge pump Weight (lb) Water outlet (inch) Max. suction lift (ft) Air consumption (cfm) Performance (gal/min) 152.0 2 1/2 0 85 90-36 gal/min at 136 ft Water inlet (inch) Price 2 1/2 $1740 F027762 Inlet Hose Nipple 3 unthreaded x 2-1/2 BSP $17.47 R146385 Outlet Nipple 2-1/2 NPT (both ends) $10.08 R146383 Outlet Nipple 2-1/2 NPT Street Elbow $25.57 SUBMERSIBLE WATER PUMPS The CP 0010 and CP 0020 submersible pumps are designed with the performance and durability which make them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Will pump down to within 7/8 (22 mm) from base. Single-stage centrifugal units driven by powerful vane motors Double seals protect bearings and motor from water and mud Integral oiler provides continuous lubrication Integral Strainer, Air inlet valve Bronze impeller Cast-iron housing NOT INTENDED FOR PUMPING FLAMMABLE FLUIDS AND MUST NOT BE USED FOR DONG SO Part Number Description T022224 CP 0010 Sump pump Weight (lb) Water outlet (inch) Min. water depth (inch) Air consumption (cfm) Overall diameter (inch) Performance Price 33.0 2 7/8 100 8 1/4x9 250-125 gal/min at 90 $1240 R137578 Air Exhaust Pipe $25.57 T022185 CP 0020 Sump pump 58.0 2 1/2 7/8 110 9x11 3/4 340-155 gal/min at 90 $1960 R137580 Air Exhaust Pipe $42.75 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com CROWDERPNEUMATICS.COM 11

12 888-883 883-5144 CROWDERPNEUMATICS.COM HEAVY DUTY CORE DRILL Pneumatic Core Drill & Concrete Vibrator Chicago Pneumatic's CP 0315 Core Drill is a powerful hand-held rotary drill with a threaded output shaft onto which a water swivel and a core bit can be fitted. It was originally designed for hand-cutting holes in reinforced concrete junction boxes for fiber optic cables. It is now being used in many other sectors of the construction industry for cutting holes in concrete, brickwork and stone and where access or position restricts the use of rig-mounted units. It is also ideal for use in hazardous environments where use of electrical tools is forbidden. Core Diameter Range: 2 1/2" to 6" Powerful 1.2 hp air motor Self-closing twist throttle operation with one-hand control Governor controlled motor holds speed at heavy loads while increasing power Integral oil reservoir ensures correct oiling during use External grease fitting for easy lubrication Breast-plate for operator comfort during horizontal drilling Light weight promotes stable operation Additional adapter available for standard drilling operation Part # Free Speed (rpm) Output Shaft Air Inlet Size Length Weight (lbs) Price T024733 750 45/64-16tpi 1/2 bsp 13 14 $1,215 CONCRETE VIBRATOR Chicago Pneumatic's CP 2190 heavy duty concrete vibrator is designed for removing air pockets from pourings of low slump concrete in columns, footings, slabs and walls. It has a greater radius of influence which translates to a greater amount of work accomplished in a shorter period of time. And, unlike electric concrete vibrators, there is no chance of shock or need for extension cords. Variable speed throttle In-line lubricator Auxiliary air hose Locked motor end plates 1/2 NPT air connection Part Number Description Weight (lb) Length w/o Aux Hose Radius of Influence Capacity (cu yds/hr) Air (cfm) Vibration /Min Head Diameter Head Length Price T019308 CP 2190 27 118 15-16 40 65 12,000 2 1/2 13 3/4 $870 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com 12 CROWDERPNEUMATICS.COM

888-883 883-5144 CROWDERPNEUMATICS.COM 13 Backfill Tampers CP backfill tampers are designed to effectively compact soil around foundations and other structures and for compacting backfill in trenches. Unlike the CP backfill tampers, many competitors on the market were designed for sand ramming only and thus lack the full power necessary for contracting operations. The CP 0003 is designed to handle light-to-medium applications; the CP 0004 RV is the ideal tool for heavier jobs. Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powered material Heat-treated cylinder and chrome plated piston - significantly extends tool life Adjustable packing - maintains a positive air seal Butt held with clamp screw - for quick, easy replacement Exhaust deflector - directs air, moisture and oil away from operator Integral oiler - continuously lubricates tool during operation Well balanced, smooth operation tool - easily guided by one person Part Number Description Weight (lb) Air consumption (cfm) Blows per minute Price T019307 CP 0003 30.0 18 800 $890 P089008 Butt 90.10 P089006 Lock Nut 29.59 T022292 CP 0004 42.0 28 780 $1035 P089050 Butt 326.70 P089045 Lock Nut 29.59 Part Number Description T022137 CP 0006 Scabbler 8900 0040 01 CP 0006 SVR Scabbler T024412 CP 0066 Scabbler Scabblers The CP 0006 & CP 0066 scabblers are ideal tools for cleaning and roughening concrete and construction joints. They can also be used to produce ornamental or contrasting finishes on road and building structures. With their different handle designs, CP 0006 is more suitable when working on large surface areas whereas the CP 0066 is mainly used for hard-to-reach areas. Lightweight, compact tool with contoured grip handle - reduces operator fatigue; increases output Tungsten carbide-tipped pistons - last longer; are easily replaced Back head grip - gives in-line thrust Chamfered cylinder block - increases visibility of the work piece permitting close-up operation in corners Weight (lb) Width Air Cons (cfm) No. and type of pistons Comments Price 10.0 4 2/5 28 Three 4-point carbide tipped pistons 14.3 28 Three 4-point carbide tipped pistons 10.0 2 15 Three 4-point carbide tipped pistons Back head handle $440 Vibration-Reduced Handle In-line handle for tight areas F064604 Piston for CP 0006 $68.55 R145921 Piston for CP 0066 $73.95 F826706 Piston Cap for CP 0006 $5.24 R147614 Piston Cap for CP 0066 $1.61 $745 $565 CROWDERPNEUMATICS.COM 13

14 888-883 883-5144 CROWDERPNEUMATICS.COM Picks and Clay Diggers Chicago Pneumatic offers you a wide range of robust picks to best match your demolition and clay digging applications. CP 0122 and CP 0125: The most powerful pick hammers in the range, weighing 24-31 lbs. They are particularly suitable for working with relatively hard concrete in demolition, pile-capping, or bridge deck applications. CP 0111 and 0222: Very popular multi-purpose pick, with good power-to-weight ratio and latch retainer for quick and easy change of steels. Available with both inside and outside trigger. (22lbs (10Kg). FL 0022: Originally designed for mining and soft tunneling applications, the FL 0022 is a very slim, easy to handle tool. It is made entirely of steel with quality components for highest power and long lasting reliability. Screw-on retainer with square chucks for clay digging spades or cone retainers for demolition pick Part Number Description 8900 0001 41 CP 0111 CHIT Pick Hammer 8900 0001 20 CP 0111 CHLA Pick Hammer Weight (lb) Chuck size (inch) Air (cfm) Blows per minute Retainer type Handle type 29.0 7/8x3 1/4 45 1800 Latch Close handle - Inside trigger 29.0 1x4 1/4 45 1800 Latch Closed handle - Outside trigger Muffler incl. Price - $900 - $840 F814133 Muffler Assembly for CP 0111 Pick Hammer $168.07 8900 0001 43 CP 0122 S Pick Hammer 8900 0001 44 CP 0122 SRV Pick Hammer 8900 0001 45 CP 0122 SVR Pick Hammer 8900 0001 46 CP 0125 S Pick Hammer 8900 0001 47 CP 0125 SVR Pick Hammer 24.3 7/8x3-1/4 47 1380 Screw-on Closed handle- Inside trigger 29.8 1 x 3 Hex 44.5 1380 Screw-on Closed handle- Inside trigger 29.8 7/8x3 1/4 44.5 1380 Screw-on Closed handle- Inside trigger 27.6 1 x 3 Rnd 36 1080 Screw-on Closed handle- Inside trigger 28.7 1 x 3 Hex 36 1080 Screw-on Closed handle- Inside trigger Yes $1250 Yes $1470 Yes $1485 Yes $1250 Yes $1485 8900 0001 21 CP 0222 CHIT Pick Hammer 8900 0001 22 CP 0222 CHITBS Pick Hammer 8900 0001 23 CP 0222 CHOTBS Pick Hammer 22.0 7/8x3 1/4 40 1700 Latch Closed handle - Inside trigger 24.3 7/8x3 1/4 40 1500 Latch Closed handle- Inside trigger 24.3 7/8x3 1/4 40 1500 Latch Closed handle- Outside trigger - $660 Yes $835 Yes $835 R141765 Muffler Assembly $90.10 8900 0001 24 FL 0022 Clay Digger 22.0 3/4x3 1/4 33 1300 Screw-on Closed handle - Outside trigger 8900 0001 25 FL 0022 S Clay Digger 8900 0001 39 FL 0022 SVR Clay Digger T025402 FL 0022 VR Clay Digger 23.0 3/4x3 1/4 33 1300 Screw-on Closed handle - Outside trigger 28.7 3/4x3 1/4 Sq 27.6 3/4x3 1/4 Sq 44.5 1380 Screw-on Closed handle- Outside trigger 44.5 1380 Screw-on Closed handle- Outside trigger - $820 Yes $865 Yes $1390 - $1340 F814201 Muffler Assembly $183.84 14 CROWDERPNEUMATICS.COM

888-883 883-5144 CROWDERPNEUMATICS.COM 15 PNEUMATIC SAW The CP 0044 is a powerful tool driven by a direct drive, 4 hp motor and is designed to cut a variety of surfaces including concrete, asphalt and stone. This direct drive saw has no belts needing constant checking of tension. A built-in oiler provides continuous lubrication. The CP 0044 is also designed with safety in mind, using a standard lock-off trigger to help prevent accidental starting. Chicago Pneumatic 4 hp motor One-hand operation blade guard Integral oiler Lock-off trigger Direct drive operation Two position handle Air consumption (cfm) Blade arbor diameter Builtin oiler Comments Price Weight Part Number Description (lb) RPM T024421 CP 0044 Saw 25.0 85 1 4800 Yes Inc. 4 hp motor $1035 3378 0050 57 Concrete Diamond Disc $234.74 3378 0050 58 Asphalt Diamond Disc $234.74 HEAVY DUTY INDUSTRIAL IMPACT WRENCHES CP impact wrenches have been developed as a simple 3-piece construction for ease and speed of servicing. They have durable steel clutch housings (zinc option on some models). These tools are heavy duty and suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Torque Controlled - Tool 'shuts off' at a predetermined torque with the added benefits of being able to eliminate some operator influence and be used for 2 or more torques. Part Number Description Drive Socket retainer Clutch Type Handle style Torque working Torque max. T025285 CP6300 RSR 3/8" Friction Ring Single Dog Pistol 54-203 243 $260 T025214 CP6500 RS 1/2" Pin Double-Dog Pistol 140-480 710 $335 T025216 CP6500 RSR 1/2" Friction Ring Double-Dog Pistol 140-480 710 $335 T025215 CP6500 RSS 1/2 Quick Change Double-Dog Pistol 140-480 710 $375 T024059 CP6060 SASAB 3/4" Hole 2-Jaw Pistol 265-880 1350 $1870 T024058 CP6060 SASAR 3/4" Friction Ring 2-Jaw Pistol 265-880 1350 $1785 T024060 CP6060 SASAK 1 Hole 2-Jaw Pistol 265-880 1350 $1835 T022580 CP0611 GASED 1" Hole 2-Jaw D Handle Outside Trigger T022581 CP0611 GASEL #5 Spline #5 Spline 2-Jaw D Handle Outside Trigger T022578 CP0611 PASED 1" Hole 2-Jaw D Handle Inside Trigger T022579 CP0611 PASEL #5 Spline #5 Spline 2-Jaw D Handle Inside Trigger T017755 CP6120 GASEL #5 Spline #5 Spline 2-Jaw D Handle Outside Trigger T018235 CP6120 PASEL 1 1/2 #5 Spline 2-Jaw D Handle Inside Trigger T018237 CP6120 GASED 1 1/2" Hole 2-Jaw D Handle Outside Trigger T018841 CP6120 PASED 1 1/2" Hole 2-Jaw D Handle Inside Trigger Price 1220-2440 3790 $3380 1220-2440 3790 $3305 1220-2440 3790 $3160 1220-2440 3790 $3365 815-2710 4740 $4845 815-2710 4740 $4845 815-2710 4740 $4695 815-2710 4740 $4695 CROWDERPNEUMATICS.COM 15

16 888-883 883-5144 CROWDERPNEUMATICS.COM Freedom of movement, zero set-up time RED HAWK GAS POWERED BREAKER A Multi-Purpose Tool From the leading supplier of demolition tools comes the Red Hawk gas powered breaker. Tough and well designed, the Red Hawk is ideal for small. jobs or for working in remote locations. With no compressors, hoses or cables to set up, gas-powered breakers are ideal for smaller jobs. An impressive range of tools make the Red Hawk extremely flexible and the 7/8 and 4-1/4 steels make for rapid penetration of concrete. Low emissions, vibrations and noise level Red Hawk is a modern tool that meets emerging regulations. Equipped with a catalytic converter and newly designed carburetor, the machine meets tough US emission regulations EPA1. In addition, a silencer has reduced the noise level from 114 db to 107 db, thereby fulfilling the European Noise Emission Directive Easy to start With a choke control, carburetor and user-friendly instructions, the Red Hawk easy to start. An optional guide roller makes it easier to pull downwards to start the machine when it is placed higher up. Order part number 9234 0009 38. Vibration-dampening handles have reduced vibration levels from 8 to less than 4.8 m/s 2. Easy to transport The Red Hawk weighs in at about 50 pounds. Each comes with its own carrying case which fits easily into the trunk of your car. TECHNICAL DATA ENGINE Model Part Number Wt (lb) L D Width over handles 16 CROWDERPNEUMATICS.COM Tool Shank Sound Level (Acc. To ISO 3744) Vibration Level (Acc to ISO 8662) Red Hawk 2010 8318 0900 02 50.5 27.3 11.0 23.0 7/8" - 4-1/4" 107 db 4.7 m/s 2 $4195 Type 185cc 1-cylinder, 2 stroke Power 1kW Cooling System Forced Air Starter System Recoil starter Recommended Fuel Unleaded Price Oil Type Oil Mix Fuel Capacity Fuel Consumption Impact Rate synthetic two-stroke oil 2% 1:50 0.31 US Gal 0.36 US Gal/ hr 2600 BPM COMMON REPLACEMENT PARTS Part No. Description Price 9234 0015 55 Ignition Cable & Spark Plug Cap $10.98 9232 2405 01 Starter Spring $252.71 9234 0009 00 Starter Rope & Handle $11.40 9234 0001 36 Air Filter $39.42 9234 0009 04 Spark Plug $9.96

Crowder Hydraulic Tools Authorized Distributor of Atlas Copco Hydraulic Tools and Accessories POWER PACKS PAVING BREAKERS POST DRIVERS ROCK DRILLS Page 4 Page 2 Page 5 Page 7 PICK HAMMERS CUT-OFF SAWS HYDRAULIC PUMPS CORE DRILLS Page 7 Page 8 Page 8 Page 8 POST PULLERS POST HOLE BORE ACCESSORIES Page 6 Page 6 Skid Steer, Tractor Package Run your hydraulic tools off the Auxiliary hydraulics port using an oil divider. Page 4 Crowder Hydraulic Tools offers chipping hammers and hydraulic breakers covering a wide range of applications. The range of tools covers a variety of drilling, breaking, cutting and driving applications including everything from light chipping to breaking up frozen ground and demolishing concrete. CROWDERHYDRAULICTOOLS.COM

2 Hydraulic Paving Breakers VIBRATION DAMPENED BREAKERS Here's this compact, quiet tool and it hits harder than any other type of breaker. That's because hydraulics are more efficient than electric, pneumatic or petrol-driven tools. For example, a 32 kg (70 lb) hydraulic breaker gives you the same hitting power as a 40 kg (90 lb) pneumatic. Thanks to their amazing impact energy, hydraulic breakers can be used on concrete, asphalt and frozen ground. You can, of course, also use them for trenching, tietamping, spike driving and general demolition. LH 19E Hydraulic Paving Breaker and 13-30 Power Pac The sprung handle provides vibration dampening. In addition to this, the handle offers enhanced durability and easy maintenance. Part Number Description Shank Size (inch) Weight (lb) Length Impact Energy (gpm) Oil flow (psi) Working pressure EHTMA Price 1801 3443 41 LH 190 E breaker 1 x 4-1/4 48.5 25.6 49 5.3 1668 C $2125 1801 3546 93 LH 230E HBP breaker 1801 3546 95 LH 230E HBP breaker 1801 3546 92 LH 230E HBP breaker 1801 3647 01 LH 280E HBP breaker 1801 3647 03 LH 280E HBP breaker 1801 3747 09 LH 400 E HBP breaker 1801 3747 11 LH 400 E HBP breaker 1-1/8 x 6 58.4 28.7 62 5-8 1813 C/D $2275 1-1/4 x 6 58.4 28.7 62 5-8 1813 C/D $2275 1 x 4-1/4 58.4 28.7 62 5-8 1813 C/D $2275 1-1/8 x 6 65 30.1 81 5-8 1813 C/D $2425 1-1/4 x 6 65 30.1 81 5-8 1813 C/D $2425 1-1/8 x 6 79.4 30.1 111 8-9 1813 D/E $2750 1-1/4 x 6 79.4 30.1 111 8-9 1813 D/E $2750 *) 25x108 mm shank version LH 190 E Breaker LH 230 E Breaker See our Hydraulic Accessories LH 280 E HBP Breaker LH 400 E Breaker On Page 4 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com 2 CROWDERHYDRAULICTOOLS.COM

3 STANDARD BREAKERS The first time you use a hydraulic breaker, you're in for a surprise. Here's this compact, quiet tool and it hits harder than any other type of breaker. That's because hydraulics are more efficient than electric, pneumatic or petrol-driven tools. For example, a 32 kg (70 lb) hydraulic breaker gives you the same hitting power as a 40 kg (90 lb) pneumatic. Thanks to their amazing impact energy, hydraulic breakers can be used on concrete, asphalt and frozen ground. You can, of course, also use them for trenching, tie-tamping, spike driving and general demolition. Part # Description Shank Size (inch) Weight (lb) Length (inch) Impact Energy (foot lbs) Oil flow (gpm) Working pressure (psi) EHTMA (class) Price 1801 3443 36 LH 180 breaker 1 x 4-1/4 38.6 25.6 49 5.3 1668 C $2080 1801 3546 90 LH 220 HBP breaker 1801 3546 88 LH 220 HBP breaker 1-1/4 x 6 48.5 28.7 62 5-8 1813 C/D $2075 1-1/8 x 6 48.5 28.7 62 5-8 1813 C/D $2075 1801 3543 46 LH 220 breaker 1 x 4-1/4 48.5 28.7 62 5-8 1813 C/D $2930 1801 3646 97 LH 270 HBP breaker 1801 3646 99 LH 270 HBP breaker 1801 3747 07 LH 390 HBP breaker 1801 3747 05 LH 390 HBP breaker 1-1/8 x 6 55.1 30.1 81 5-8 1813 C/D $2225 1-1/4 x 6 55.1 30.1 81 5-8 1813 C/D $2440 1-1/4 x 6 69.5 30.1 111 8-9 1813 D/E $2550 1-1/8 x 6 69.5 30.1 111 8-9 1813 D/E $2550 LH 180 HBP Breaker LH 220 HBP Breaker LH 270 HBP Breaker LH 390 HBP Breaker HIGH BACK PRESSURE TOOLS These units are able to work on a maximum return/back pressure of 400 PSI (200 PSI for nonhigh back pressure units) Flow requirement of 8 gpm (Same as non-high back pressure units) Working pressure at approximately 1500 to 1800 PSI with maximum relief valve setting at 2200 PSI. (Same as non-high back pressure units) To ensure that the tool is receiving the correct flow of 8 gpm, you will need OFD 30 Oil flow divider part #1801 1642 32 Oil flow Divider (Max flow in: 32 gpm; max. pressure: 3,600 psi). No warranty for tools damaged by over pressure when run without an oil flow divider. CROWDERHYDRAULICTOOLS.COM 3

4 Hydraulic Power Pacs You can use the Atlas Copco power packs virtually anywhere: fitted with wheels and handles, they are easy to maneuver around building sites. They are easy to start, the noise level is low, and when they are not in use, the power packs are small enough to be stored on shelves. They are also lightweight enough that two people can lift one up and fit it in the back of a van. The reliable motor, whether you chose gas, diesel or electric, supplies hydraulic power in accordance with the Power-on-Demand principle, i.e. the power pack runs idle until the tools begins to work. The power packs are protected by a strong frame made of steel tube. They have been tested for more than 1000 hours of operation and with several thousand units in daily operation. Part Number Description Hose Incl. Motor/Engine Elec. Start Weight incl. oil (lb) Oil flow (gpm) Max pressure (psi) EHTMA class Price 1807 0080 31 LP 9-20 P PAC Yes 9 HP Honda gas No 163 5 2200 C $4850 1807 0110 20 LP 13-20 DE PAC No 10 HP Yanmar Yes 256 5 2000 C $5150 diesel 1807 0110 23 LP 13-30 P PAC Yes 13 HP Honda gas No 201 5-8 2200 C/D $5750 1807 0160 18 LP 18-30 PE PAC No 18 HP B&S Vanguard gas 1807 0160 40 LP 18-40 PE PAC No 18 HP B&S Vanguard gas 1807 0160 32 LP 18-2X20/1X40 PE PAC* No All power packs include a filter indicator. 18 HP B&S Vanguard gas Yes 243 5-8 2500 C/D $7350 Yes 243 5-10 2200 C/D/E $7550 Yes 243 2x5/ 1x10 2200 C/E $7750 *) Twin Outputs, Oil Flow 2 at 5 gpm each or 1 at 10 gpm INFORMATION AND MANUALS Detailed Parts Breakdowns and Operation Manuals Available on Web Site: www.crowderhydraulictools.com Hydraulic Accessories RUN YOUR HYDRAULIC TOOLS FROM YOUR SKID STEER, TRACTOR OR BACKHOE! Use your auxiliary hydraulics port to power your hydraulic tools by connecting an oil divider and extension hoses. Part Number Description Max oil flow rate (gpm) Regulated oil flow rate (gpm) EHTMA class Price 1801 1632 29 OFD 20 Oil flow divider 15.85 5.3-6.6 C $699 1801 1642 32 OFD 30 Oil flow divider 31.00 6.0-10 D $875 Parts Breakdown on our web site, crowderhydraulictools.com EXTENSION HOSES By adding one or two 7 m (23 ft) extension hoses you can use up to 21 m (70 ft) of hose with no significant drop in pressure. The hoses are light and flexible and are fitted with flat-face, quick release couplings. (Extension hoses come as standard with LP 9-20 and LP 13-30 P). Part Number Description Length (ft) Couplings: flat face quick release (dimension) EHTMA class Price 3371 8010 87 Twin extension hose 23 1/2 C/D $415 3371 8010 89 twin extension hose 39 1/2 C/D $525 4 CROWDERHYDRAULICTOOLS.COM

5 Hydraulic Post Drivers Used for driving in road barrier tubes, profiles, signposts, fences and a wide range of anchors. The post drivers provide stable, powerful, high speed driving for a variety of post sizes. When operated with an optional hosemounted remote-controlled valve, the drivers can be run with both open- or closed-centre systems. Now you can use your skid steer, backhoe, excavator or tractor to power your Post Driver. These tools are designed to work with high back pressure and represent a breakthrough in versatility. HIGH BACK PRESSURE (HBP) These units are able to work on a maximum return/back pressure of 400 PSI (200 PSI for non-high back pressure units) Flow requirement of 8 gpm (Same as non-high back pressure units) Working pressure at approximately 1500 to 1800 PSI with maximum relief valve setting at 2200 PSI. (Same as non-high back pressure units) *To ensure that the tool is receiving the correct flow of 8 gpm, you will need OFD 30 Oil flow divider part #1801 1642 32 Oil flow Divider (Max flow in: 32 gpm; max. pressure: 3,600 psi). No warranty for tools damaged by over pressure when ran without an oil flow divider **For John Deere and Bobcat skidsteer that deliver between 16 and 30GPM. Pressure Reduction Hoses must be used in conjunction with the OFD. LPD-T HBP ** LPD-RV HBP ** KAPD-23 Activation type By trigger lever By remote valve By trigger lever Hydraulic system Open-centre Open- or closed-centre Open-centre Weight lb 68 64 23 Max working pressure psi 1500-2000 1500-2000 1000-1300 Flow gpm 5-8 5-8 5.3 Impact rate at 30 l/min blows/ min 1500 1500 2400 EHTMA class C/D C/D C 1801 4040 02 1801 4050 02 KAPD-23 Price: $2650 $2650 $1880 See Post Driver Adapter Table below Parts Breakdown Available on Web Site: crowderhydraulictools.com Hydraulic Post Drivers Adaptors Description Universal Adaptor 2 1/2 Round Adaptor 3 3/4 x 6 Square Adaptor 2-1/8" Part Number 3371 8060 33 3371 8060 34 3371 8060 32 Price $41.20 $41.20 $41.20 CROWDERHYDRAULICTOOLS.COM 5

6 Hydraulic Post Puller The post puller is used by road-maintenance contractors to repair barriers. With hardened jaws and automatic chain tightening clamp, the Atlas Copco post puller is ideal for removing all kinds of wooden or steel posts including IPE, HPE, and UPE profiles, plus round/square steel tubes. A built-in hand lever gives a total pulling force of up to 10 tons. Part Number 1801 8100 03 Description Weight lb 132 LPP 10HD Oil flow gpm 5-10 Max working psi 2320 pressure Oil flow gpm 5-10 Lift capacity per Inch 0.5-8 stroke Pulling Force Lb 13228 Full Pulling Force Lb 22045 EHTMA Class C/D Price $3250 Handheld Hydraulic Post Hole Borer Compact and efficient, this tool drills holes up to 1.3 m (4.3 ft) deep and 90-350 mm (3.5-13.8 in) in diameter. It offers reverse rotation and is designed for two-person operation. All augers have interchangeable bits and points. Part Number Description 1806 1014 33 LPHB Posthole Borer Weight without auger Oil flow (gpm) Working pressure (psi) Torque (Nm) Speed of rotation (rpm) Auger Size at L=870 (inch) EHTMA class Price 44 20-40 1100-2150 315 60-160 3,5-13,8 C/D/E $1550 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com 6 CROWDERHYDRAULICTOOLS.COM

7 Hydraulic Pick Hammer The Atlas Copco LH 11 D-handle breaker is ideal for TECHNICAL DATA horizontal work in brick, mortar and light concrete. It is one of the most powerful pick hammers on the market, featuring an impact energy of 25 joules and impact rate of 2,400 blows/min. With its detachable front handle, the LH 11 is a popular choice for renovation, demolition and structural alteration jobs. LH 11 Part Number 1801 1741 18 Shank Size inch 7/8 x 3-1/4 Weight lb 23.8 Length inch 23.6 Oil flow gpm 5.3 Working pressure psi 1000-3000 Price: $1750 Hydraulic Rock Drills This lightweight tool is designed for drilling blast, anchor and rock-splitting holes. Used, for example, by contractors, armies and utilities who want convenient and efficient drilling without large compressors. With standard integral steel, it drills diameters of up to 50 mm (2 ) and depths down to approx. 6 m (33 ft) by using hydraulic power for impact and rotation. A small additional compressor is needed for flushing. Without air flushing, it can be operated wholly by hydraulics and can drill holes of down to 1 m (3.3 ft) with a spiral hammer drill. TECHNICAL DATA Part Number 1801 3800 02 Description LHD 23 M Rock Drill Shank size hex 7/8" x 4-1/4" Weight without hoses and drill lb 54 Service weight lb 62.4 Oil flow gpm 5.3-6.6 Working pressure psi 1450-2000 Impact rate blows/min 2400-3000 Revolutions rpm 320-400 EHTMA class C Price: $4360 Detailed Parts Breakdowns and Operation Manuals Available on Web Site: www.crowderhydraulictools.com CROWDERHYDRAULICTOOLS.COM 7

8 Hydraulic Cut-Off Saws These powerful, light and compact saws can be used to cut through concrete, asphalt and steel. Their simple hydraulic design with direct drive reduces maintenance, especially in comparison with belt-driven saws. They are easy to use thanks to the open cutting face, even under the most demanding conditions. With a lightweight cart you can use the saws for floor, road and other light surface jobs. LS 14 LS 16 Part Number 1809 0140 01 1809 0160 00 Weight lb 21.6 23.4 Oil flow gpm 5-8 5-10 Rotation speed, rpm 1/rpm 2500-4000 2000-4000 Speed ft/s 151-246 138-279 Disc size inch 14 16 Arbor size inch 1 1 Cutting depth inch 5.3 6.3 EHTMA class C/D C/D/E Price: $2050 $2200 1809 0010 01 Walk Behind Cart $1075 Hydraulic Core Drills These powerful drills are ideal for jobs where there is no space for drill stands. Due to the non-kick back operation, you can still drill holes of up to 200 mm (8 in) in diameter free hand. Fully hydraulic, the tools can be used for wet diamond core drilling on the toughest jobs. The LCD core drill offers spark free operation there are no electrical components for safe operation inside buildings, in hazardous environments and even underwater. TECHNICAL DATA Length without drill (inch) Speed of rotation (rpm) Part Number Description Weight (lb) Oil flow (gpm) Working pressure (psi) Drill diameter EHTMA class Price 1806 1014 38 LCD 500 18 5,3 16 1160-2500 600 3-8 C/D $2850 1806 1014 39 LCD 1500 18 5,3 16 1160-2500 1500 2-4 C/D $2850 Hydraulic Pumps Lightweight and compact submersible discharge pumps are used in a wide range of applications. These include continuous pumping of clean or contaminated water on building sites, in flooded excavations and cellars. TECHNICAL DATA Part Number Description Weight Oil flow (gpm) Working pressure (psi) Pump head max (ft) Pump flow max (gps) Solid handling up to (inch) EHTMA class 1806 1014 34 LWP 2 23 4,8-6,4 1500 82 3,7 3/8 C $1750 1806 1014 35 LTP 3 28 6,9-10,1 2000 104 8,5 2 1/2 D $4050 Parts Breakdown on our web site, crowderhydraulictools.com Price 8 CROWDERHYDRAULICTOOLS.COM

9 Crowder Pneumatic Tools Authorized Distributor of Atlas Copco Tools and Accessories PAVING BREAKERS ROCK DRILLS STOPER & FEED LEG Page 10 Page 12 Page 14 PICK HAMMER CHIPPING HAMMER RIVET BUSTER Page 15 Page 16 Page 17 PUMPS BACKFILL TAMPER SCALER Page 17 Page 18 Page 18 Crowder Pneumatic Tools offers chipping hammers and pneumatic breakers covering a wide range of applications. The range of tools covers a variety of drilling, breaking, cutting and driving applications including everything from light chipping to breaking up frozen ground and demolishing concrete. CROWDERHYDRAULICTOOLS.COM 9

10 Simplicity of design means fewer parts, less hassle, easier on-site service and maintenance and therefore less down time. Good news for everyone who buys, rents, or operates our machines. When we first introduced the TEX range we raised the bar for the industry and it became a global leader. And still is. The most recent additions to the TEX range include new design features that live up to the TEX breakers reputation for excellent handling, performance and reliability. Simplicity, in the design and the function of the eight most recent models TEX 140-280, sets a new standard for pneumatic breakers again! In each series, and in some cases also between the series, TEX breakers have many common parts. This helps you keep your parts stock to a minimum. They not only share parts, but they have a lot more in common: Valve parts of glass-fiber reinforced polymer eliminate corrosion problems When the machines are running offload, the piston turns on air-cushions at either end of the cylinder, virtually eliminating metal-to-metal contact and reducing vibrations and wear Streamlined silencer profile does not obscure the chisel and work-piece from the operator Low center of gravity gives good balance, considerably reducing operator fatigue Design eliminates need for side bolts Unique swivel coupling, which rotates even when pressurized, makes the TEX breakers easier to maneuver. Part Number Description Pneumatic Paving Breakers Silenced Breakers Shank Size (inch) Weight (lb) Length Air Consumption (cfm) Impact Frequency (blows/min) AC-8461022334 TEX 140 PS US 1 x 4 1/4 34 27 1/4 53 1530 $930 AC-8461022432 TEX 180 PS 1 1/8 x 6 43 25 3/8 55 1500 $1050 AC-8461022434 TEX 180 PS US 1 x 4 1/4 43 25 3/8 55 1500 $1050 AC-8461022532 TEX 220 PS 52 26 1/4 63 1320 $1120 AC-8461022533 TEX 220 PS 1 1/4 x 6 52 26 1/4 63 1320 $1120 AC-8461022630 TEX 270 PS 1 1/8 x 6 62 27 1/4 68 1230 $1165 AC-8461022631 TEX 270 PS 1 1/4 x 6 62 27 1/4 68 1230 $165 AC-8461022720 TEX P60 (non-silenced) 1 1/8 x 6 75 76 27 1500 $950 AC-8461022721 TEX P60 (non-silenced) 1 1/4 x 6 77 76 27 1500 $950 AC-8461022722 TEX P60 1 1/8 x 6 79 76 27 1500 $1075 AC-8461022723 TEX P60 1 1/4 x 6 80 76 27 1500 $1075 AC-8461022820 TEX P90 (non-silenced) 1 1/8 x 6 97 85 28 1260 $1025 AC-8461022821 TEX P90 (non-silenced) 1 1/4 x 6 97 85 28 1260 $1025 AC-8461022822 TEX P90 1 1/8 x 6 101 85 28 1260 $1150 AC-8461022823 TEX P90 1 1/4 x 6 101 85 28 1260 $1150 Price Tex 140-220-270PS Pneumatic Breakers P60 P90 breakers Safety and Operating Instructions as well as Parts Breakdowns are available on our web site, crowderhydraulictools.com 10 CROWDERHYDRAULICTOOLS.COM

11 TEX 140-280 Series Solid body, solid performance and ease of use The latest TEX series is a marriage of the best and most useful features, characteristics and performance of the breaker range it replaces, and a number of new, but well-proven features such as Atlas Copco s solid body concept and the two-step trigger, SOFTSTART. Solid Body Concept The solid housing design contains fewer parts and that means greater reliability. It also allows for fast and exceptionally easy on-site service a few basic tools are all you need. Existing Atlas Copco products that feature the solid body concept have enjoyed great success, winning broad market acceptance. PE Vibro-reduced Breakers For the new PE Breakers, with spring-mounted handles, we have further improved the vibration characteristics, decreasing the vibration emissions. The new breakers are still as hard-hitting and reliable as the previous TEX series, but with greater operator comfort and more productivity. PS Breakers Noise Reduced, Standard Breakers These fixed-handle breakers feature all the advantages of the PE series except the vibro-reducing handles. They are as hardy, reliable and productive as ever. Vibration Reduced Breakers AC-8461022335 TEX 150 PE US 1 x 4 1/4 42 23 1/4 53 1530 $1075 AC-8461022433 TEX 190 PE 1 1/8 x 6 51 25 3/8 55 1500 $1165 AC-8461022435 TEX 190 PE US 1 x 4 1/4 49.6 25 3/8 55 1500 $1165 AC-8461022534 TEX 230 PE 1 1/8 x 6 60 26 1/4 63 1320 $1380 AC-8461022535 TEX 230 PE 1 1/4 x 6 60 26 1/4 63 1320 $1380 AC-8461022632 TEX 280 PE 1 1/8 x 6 69 27 1/4 68 1230 $1440 AC-8461022633 TEX 280 PE 1 1/4 x 6 69 27 1/4 68 1230 $1440 AC-8461022422 TEX 21 PE 1 x 4 1/4 52.9 25 1/2 57 1200 $1430 AC-8461022701 TEX 33 PE 1 1/8 x 6 81.6 30 72 1200 $1565 AC-8461022700 TEX 33 PE 1 1/4 x 6 81.6 30 72 1200 $1565 AC-8461022805 TEX 40 PE 1 1/8 x 6 93 30 85 1110 $1625 AC-8461022804 TEX 40 PE 1 1/4 x 6 93 30 85 1110 $1625 Safety and Operating Instructions as well as Parts Breakdowns are available on our web site, crowderhydraulictools.com TEX 21, 33 and 40 PE Pneumatic Breakers Tex 190-280 PE Pneumatic Breaker CROWDERHYDRAULICTOOLS.COM 11

12 Pneumatic Rock Drills Light and easy to handle, BBD Rock Drills are ideal for those quick jobs and for working in difficult-to-get-to areas. They can be equipped with either D- or T-handles. The ratchet-wheel action provides faster rotation and higher impact frequency for drilling in soft to medium hard rock. RH Drills are designed for heavier jobs such as bench and secondary drilling, plus drilling for smooth blasting. RH drills have a robust rifle-bar rotation mechanism and high impact energy for drilling in hard rock. Light weight for easy handling Built-in air-flushing gives faster blasting cycles Stepless throttle for easy collaring Robust kick-latch retainer change steels quickly and easily Spring-dampened handles reduce vibrations by 75% Silencer in impact- and wear-resistant polyurethane reduces noise levels by more than 50% TECHNICAL DATA Impact Freq. (blows/ min) Rotation Speed (rpm) Penetration Rate Shank Size Weight Length Air Part Number Description (in.) (lbs) (cfm) Price 8311 0102 47 BBD 12D 3/4 X 4 1/4 22 22 1/4 51.1 2580 220 10 $1895 8311 0102 80 BBD 12DS 3/4 X 4 1/4 24 22 1/4 46.9 2520 220 8 $1985 8311 0102 95 BBD 12-T01 7/8 X 4 1/4 24 20 51.1 2580 220 6 $1895 8311 0102 98 BBD 12TS-01 7/8 X 4 1/4 27 20 46.9 2520 220 6 $2065 8311 0301 29 RH 571-5L 7/8 X 4 1/4 39 20 83 2100 190 11 5/8 $1655 8311 0301 37 RH 571-5LS 7/8 X 4 1/4 42 20 83 1980 190 10 7/8 $1815 8311 0302 86 RH 658L 7/8 X 4 1/4 53 22 1/4 123.5 2040 215 16 3/4 $1890 8311 0302 89 RH 658L 1 X 4 1/4 53 22 1/4 123.5 2040 215 16 3/4 $1890 8311 0302 87 RH 658LS 7/8 X 4 1/4 55 22 1/4 123.5 2040 215 16 $1960 8311 0104 02 BBD 15E 3/4 X 4 1/4 34 22 3/4 47 2520 220 8 3/4 $2440 8311 0104 09 BBD 15E 7/8 X 3 1/4 34 22 3/4 47 2520 220 8 3/4 $2440 8311 0104 10 BBD 15E 7/8 X 4 1/4 34 22 3/4 47 2520 220 8 3/4 $2440 8311 0104 13 BBD 15ET 7/8 X 4 1/4 34 22 3/4 47 2520 220 8 3/4 $2440 8311 0301 78 RH 572E 7/8 X 4 1/4 50 23 79 2040 170 10 1/4 $1960 12 CROWDERHYDRAULICTOOLS.COM

13 The DKR 36 is a dual-function pneumatic drill/chipper that weighs just ten pounds. It s a machine that packs a powerful punch. Despite its light weight and compact size, you can get more work done up to two to three times more than with a comparable electric drill. It s also a lot more robust, and will not burn out when pushed hard. This dual-function machine can be used for both chipping and drilling. Changing between the different modes is simple: just exchange the chipping tool for a drill steel, and the DKR 36 automatically switches to the drilling function. Light weight, heavy hitting More productive than an electric drill/chipper Powerful, yet light weight Two functions in one machine Built-in lubricator for easy maintenance Quick-coupling chuck for fast tool changes Pneumatic Rock Drill/Chipper TECHNICAL DATA DKR 36 DKR 36R Part No. 8463 0103 60 8463 0103 50 Shank Size inch.580 x 3 1/2 3/4 x 3 1/4R Weight lb 10 10 Length inch 14 3/4 14 3/4 Air Consumption cfm 21.3 21.3 Impact Frequency blows/min 2820 2820 Rotation Speed rpm 250 250 Penetration Rate In./min 7.1 7.1 Hose Connection in. 3/4 3/4 Price $975 $740 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com CROWDERHYDRAULICTOOLS.COM 13

14 TECHNICAL DATA Part Number Description Pneumatic Stoper and Feed Leg Drills Air Consumption (cfm) Rock Drill Piston Bore (in.) Stroke Length (in.) Impact Rate (Hz) Length (in.) 8311 0202 03 BBD 46WS-6 Silenced 159 3 1 49/64 51 86 13/16 86 $4020 8311 0202 11 BBD 46WS-8 Silenced 159 3 1 49/64 51 103 5/32 88 $6030 8311 0202 29 BBD 46WR-6 159 3 1 49/64 49 86 13/16 86 $4020 8311 0202 37 BBD 46WR-8 159 3 1 49/64 49 103 88 $4020 8311 0401 10 BBC 16W 127 2.76 2.17 39 28 67 $3825 8311 0408 05 BBC 34W 187 3.15 2.76 38 30.5 68 $4350 8311 0303 47 BBC 34WS Silenced 187 3.15 2.76 38 30.5 68 $6775 8311 0206 09 BBD 94W 206 3.54 1.77 55 26.4 60 $3480 8311 0303 45 RH 656W 101 2.56 3.36 34 24.8 49 $2100 Part Number Description Suitable for Rock Drill BBD 46WS/WR Falcon Suitable for production drilling, raise driving and bolting in soft to medium hard rock; Short stroke, good penetration rates; Large piston diameter gives high efficiency even at low air pressure; Ratchet wheel rotation mechanism; WR version with clockwise rotation for tightening nuts and roof bolting BBC 16W Puma All-round rock drill, suitable for most drilling applications in medium to hard rock; Long stroke, good penetration rate; Robust rifle bar rotation mechanism; Pusher leg control placed in back head of the rock drill BBC 34W Leopard Highly efficient in medium to hard rock; Long stroke, high impact energy; Large piston diameter makes it very efficient even at low air pressure; Powerful rifle bar rotation mechanism; Pusher leg control placed in back head of the rock drill BBD 94W Panther High performance rock drill for soft to hard rock; Short stroke and high impact rate makes it ideal for soft rock; Large piston diameter for high efficiency even at low air pressure; Ratchet wheel rotation mechanism; Pusher leg control is placed on the pusher leg RH 656W Suitable for soft to medium hard rock; Good ratio between high penetration/low air consumption; Due to low weight, it can also be used as a sinker. Supplied with T-handle; Robust rifle bar rotation mechanism; Pusher leg control is placed on the pusher leg 8311 0408 06 BBC 34 DSI 187 3.15 2.76 38 30.5 68 $4500 8311 0206 10 BBD 94 DSI 235 3.54 1.77 55 26.4 61.7 $3480 PUSHER LEG DATA Piston Bore (in.) Feeding Length Length Retracted (in.) Length Extracted (in.) 8321 0301 01 BMT 51 BBC 16W, 34W 2 23/64 51 3/16 65 9/32 116 15/32 33 $1275 8321 0201 94 ALF 71 BBC 16W, 34W 2 3/4 51 11/64 17 1/16 122 1/4 31 $1315 8321 0201 95 ALF 71-1 BBC 16W, 34W 2 3/4 37 17/32 56 1/2 94 11/16 28 1/2 $1315 8321 0201 80 ALF 72D BBD 94W 2 3/4 51 3/16 77 9/16 128 3/4 42 $1650 8321 0201 81 ALF 72D-1 BBD 94W 2 3/4 47 1/4 72 119 5/16 35 $1650 8321 0102 02 BMK 62S BBD 656W 2 3/32 51 11/64 71 15/32 122 41/64 37 1/2 $900 DOUBLE TELESCOPE 8321 0201 85 ALF 67/80 BBC 16W, 34W 2 5/8 3 5/32 73 1/32 58 35/64 131 57/64 37 1/2 $1650 8321 0201 69 ALF 67/80D BBD 94 5 5/8 3 5/32 73 1/32 62 51/64 135 53/64 42 $2040 Weight (lbs) Weight (lbs.) Price Price 14 CROWDERHYDRAULICTOOLS.COM

15 Pneumatic Pick Hammer Vibration-reduced pick hammers tend to fall into two categories: either they give you good vibration dampening, but poor chisel control. Or vice-versa: ineffective dampening, but good control. With the new TEX 07PE you get the best of both. Plus good impact energy. All in a package that weighs less than 27 pounds. If you think this sounds too good to be true, ask for a demo and see for yourself. Low weight high productivity Fitted with D-type handles, machines in the TEX 09 and TEX 12 series are the lightest and most productive medium -weight pick hammers in their class. with the reliability you need TEX 09 and TEX 12 pick hammers are extremely reliable machines. Available in a variety of models, they go on giving the same high level of performance under the toughest conditions. Wide range of choices There are several versions to choose from, making it possible to cater to the needs in many different applications. All versions are silenced. SOFSTART trigger The TEX 09 and TEX 12 comes with a special two-step trigger that makes the job easier by giving you full chisel control. The TEX 10 pick hammer is a light, compact all-rounder that you ll really appreciate having around when you need a heavy hitter. With its long piston stroke and relatively low frequency, you can work quickly and effectively in concrete, hard brick and other hard materials....high performance/weight ratio Operators like the TEX 10 because it s easy to handle. It weighs just 10 kg and at 500 mm is comparatively short. Add to this the high impact energy, and you have a tool that in relation to its size and weight, hits surprisingly hard. This is especially true if you compare it with an electric tool of the same weight class: pneumatic hammers are known to deliver significantly more hitting power sometimes as much as 100 per cent more....proven design. Wide range of choices The design of the TEX 10 is the result of many years of tough work experience. The pick hammer is available in three versions and with two different shanks. Two of the versions have traditional hexagonal shanks and can be used in a wide range of applications. The TECHNICAL DATA Part Number Description Shank Size (in.) Weight (lbs) Length Air Consumptio n (cfm) Impact Frequency (blows/min) Tool Retainer Price 8461 0211 35 TEX 09 PE 7/8 X 3 1/4 23 22 36 1800 LATCH $1515 8461 0211 05 TEX 09 PS KL 7/8 X 3 1/4 26 20 39 1800 LATCH $835 8461 0211 02 TEX 09 PS 7/8 X 3 1/4 22 20 39 1800 CAP $750 8461 0211 30 TEX 10 PS 7/8 X 3 1/4 22.5 20.5 36 1350 CAP $1165 8461 0211 31 TEX 10 PSR 1 X 3 RND 22.5 20.5 36 1350 CAP $1165 8461 0211 32 TEX 10 PS KL 7/8 X 3 1/4 23.8 19.75 36 1350 LATCH $1165 8461 0211 38 TEX 12 PE 7/8 X 3 1/4 26 23 42 1620 LATCH $2135 8461 0211 13 TEX 12 PS 7/8 X 3 1/4 23 21.5 45 1600 CAP $900 8461 0211 16 TEX 12 PS KL 7/8 x 3-1/4 12.3 21.3 545 1600 LATCH $940 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com CROWDERHYDRAULICTOOLS.COM 15

16 Smaller tools for lighter jobs Pneumatic Chipping Hammers TEX 3 and TEX 05 are the ideal choice for a wide variety of lighter chipping and scaling jobs. They are particularly suitable for renovation and structural alteration work, including chipping concrete, roughening surfaces, hole making, chasing and trimming various materials. TECHNICAL DATA Air Consumption (cfm) Part Number Description Shank Size (in.) Weight (lbs) Length Impact Frequency (blows/min) Price 8461 0208 53 TEX 3 3/4 X 2 8 12 13 4080 $625 8461 0219 01 TEX 05P.580 HEX 12 15 20 2760 $425 8461 0219 03 TEX 05P.680 RND 12 15 20 2760 $425 8461 0219 00 TEX 05P 3/4 X 2 12 15 20 2760 $440 8461 0219 10 TEX 05PE (vibration dampened) 3/4 x 2 13.9 21 18 2640 $485 8461 0208 56 TEX 3 KIT $850 8461 0219 02 TEX 05 KIT $765 9238 9817 60 TEX 317.580 HEX 17 15 32 2200 $405 9238 9817 50 TEX 317.680 RND 17 15 32 2200 $405 9245 9983 05 TEX 317 D-HANDLE.580 HEX 17 15.25 36 2200 $405 9245 9983 06 TEX 317 D-HANDLE.680 RND 17 15.25 36 22 $405 9238 9817 65 TEX 318.580 HEX 18 16 32 2200 $460 9245 9969 40 TEX 318.680 RND 18 16 32 2200 $460 9245 9983 07 TEX 318 D-HANDLE.580 HEX 18 16 36 2200 $460 9245 9983 08 TEX 318 D-HANDLE.680 RND 18 16 36 2200 $460 9245 9984 14 TEX 319.580 HEX 19 15.25 32 2200 $405 9245 9984 15 TEX 319.680 RND 19 15.25 32 2200 $405 9245 9987 31 TEX 319 BALL RETAINER.580 HEX 19 15.25 32 2200 $450 9245 9986 64 TEX 319 BALL RETAINER.680 RND 19 15.25 32 2200 $450 9245 9990 31 TEX 417 D-HANDLE.580 HEX 17 15.25 36 2200 $405 9245 9990 32 TEX 417 D-HANDLE.680 RND 17 15.25 36 2200 $405 9245 9983 79 TEX 419 4 BOLT.580 HEX 19 16 36 1800 $405 9245 9983 78 TEX 419 4 BOLT.680 RND 19 16 36 1800 $405.580 HEX 19 16 36 1800 $450 9245 9992 10 TEX 419 4 BOLT BALL RETAINER 9245 9992 11 TEX 419 4 BOLT BALL RETAINER.680 RND 19 16 36 1800 $450 16 CROWDERHYDRAULICTOOLS.COM

17 Pneumatic Rivet Busters Fitted with D-type handles, the TEX 262, TEX 380 and 1133 hammers are tough, powerful tools designed for heady demolition work. Their long stroke and high impact energy, coupled with the ergonomics of the rivet buster value, make them ideal for extended demolition use. TECHNICAL DATA TEX 626 RP TEX 626 RD TEX 830 RD TEX 830 RP TEX 1133 RD TEX 1133 RP Part No. 9245 9986 62 9245 9989 81 9238 9817 75 9246 0206 59 9238 9817 85 9246 0206 60 Stroke Length 6 6 8 8 11 11 Handle Type Open D Handle D Handle Open D Handle Open Shank Size Jumbo Jumbo Jumbo Jumbo Jumbo Jumbo Weight (lb) 26 26 30 30 33 33 Length 20.5 20.5 22.5 22.5 25.5 25.5 Air Consumption (cfm) Impact Rate (blows/min) 42 42 44 44 50 50 1200 1200 1140 1140 850 850 Price $1015 $1010 $1075 $1075 $1210 $1210 Air Powered Pumps Both clean and polluted liquids Pumps used for both clean and polluted liquids in the construction, mining and process industries have to satisfy stringent demands for quality and reliable operation. They must be able to withstand difficult conditions with regard to both the surrounds and the media being conveyed, with a minimum of maintenance. Atlas Copco s air-powered pumps meet the strictest requirements. They are available in two basic designs, DIP centrifugal pumps and DOP diaphragm pumps. Both types share a number of advantages. Robust Air-powered operation ensures superior resistance to dirt, damp and impurities. DOP pumps are not affected by sand or gravel in the pump liquid, thus minimizing the risk of stoppage and the need for maintenance. Cannot be damaged by overloading An air-powered pump never runs the risk of damage from overloading. Suitable in all kinds of environments These pumps contain no electrical components which can cause sparks, and do not leak oil or need any inflammable fuel. Efficient Air-powered operation gives very high capacity in relation to weight, which makes the pumps easy to transport and use in confined spaces. They also improve overall economy by better utilizing the compressor capacity that is most often readily available. Simple design Altas Copco s air-powered pumps are of very simple design, which means simple handling, reliable operation and low maintenance requirements. TECHNICAL DATA Max Flow (l/ s) Air Consumpti on (cfm) Part Number Description Max Head (ft) Weight (lbs.) Height (in.) Width (in.) Price 8492 0103 21 DIP 25 82 28 148 51 17 9 1/4 $1735 8492 0103 39 DIP 35 115 22 148 51 17 9 1/4 $1735 8492 0106 20 DIP 65 194 11 148 51 17 9 1/4 $1735 8492 0101 49 DOP 15N 194 7 72 68 23 15 1/4 $2775 Safety and Operating Instructions as well as Parts Breakdowns available at www.crowderpneumatics.com CROWDERHYDRAULICTOOLS.COM 17

18 Pneumatic Backfill Tamper The TEX 640 backfill tamper is designed to efficiently compact loose backfill material around utility poles and foundations as well as backfilling trenches and road repairs. High blows per minute means that base material is compacted quickly and efficiently. The TEX 640 features a built-in lubricator which allows for the correct amount of oil during operation. An adjustable packing nut allows for proper readjustments as the packing set wears. TEX TECHNICAL DATA TEX 640 TEX 640 w/ Pole Part No. 9245 9976 00 Weight lb 40 Length inch 48.25 Air Consumption cfm 38.5 Impact Rate blows/min 800 Price $835 Pneumatic Ergonomic Scaler 2945 9976 01 40 48.25 38.5 800 $835 Ruggedly built, the TEX 117 is a low maintenance, long reach scaler perfect for many surface cleaning operations. Using a variety of standard accessories, the operator can chip concrete, grout, caulking or remove tiles, mastic, paint and roofing materials. The ergonomic long reach scaler reduces time consuming hand scraping and back breaking labor; it is economical to use, consuming only 7 cfm, and can operate from a small portable compressor. TECHNICAL DATA TEX 117 Part No. 9245 9987 32 Weight lb 17 Length inch 70 Air Consumption cfm 7 Impact Rate blows/min 2300 Price $660 Pneumatic Dust Collector Reduce On-Site dust and Boost Productivity Dust generated by drilling obscures vision and poses a health risk. The DCT dust collector reduces the amount of dust in the working environment. It can also increase productivity, since the drill cuttings are continuously removed. The DCT dust collector can be used with the entire range of Atlas Copco pneumatic handheld drills. The DCT dust collector works on the ejector principle, which creates an under-pressure throughout the filter system. Since the ejector is built into the filter unit, it cannot be damaged by external influences or by drilling dust. Part No Air Pressure Max (psi) Ejector Air Requirement (cfm) Suction Capacity cfm) Filter Area (ft2) Weight (lbs) Suction Hose Price 8023 0407 84 100 20 100 14 48.4 1-1/2 $3040 8317 0578 91 25 Bags $60 Safety and Operating Instruction as well as Parts Breakdowns are available for all tools shown here on our website, www.crowderhydraulics.com 18 CROWDERHYDRAULICTOOLS.COM

PNEUMATIC CONSTRUCTION TOOLS ROCK DRILLS PAVING BREAKERS CLAY DIGGERS CHIPPING HAMMERS Page 2 Page 4 Page 3 Page 7 RIVET BUSTERS TAMPERS SCALERS PARTS BREAKDOWNS Page 6 Page 8 Page 8 Construction Tools Complete Line of Pneumatic Equipment Complete Spec Sheets and Parts Breakdowns on our website: crowderairtools.com CROWDERAIRTOOLS.COM

2 APT Rock Drills The APT Model 109 and Model 115 are lightweight tools for drilling holes for anchor bolts and small dowel hole drilling. These versatile tools have a stop rotation feature that converts them from a drilling tool to a percussion tool for light chipping in horizontal and overhead work. Models 137 and 155 are used in general construction, utility work, and plant maintenance. They are designed for drilling through granite, hard faced rock, quarry drilling and drilling secondary holes for blasting. They are also used with dowel hole drilling machines. Adaptable to wet drilling application by attaching APT valve, wet tube and swivel assembly. Model 109 9 lb. class Model 115 15 lb. class Model 137 30 lb. class Model 155 60 lb. class Available with spline chuck Left-to-right hand rotation Stop-rotation feature Light-weight aluminum cast handle Model Part No. Chuck Size In. Stop-rotation feature Built-in automatic oiler Latch-type retainer Light-weight aluminum cast handle Bore Stroke B.P.M. 4 drilling speeds Replaceable piston stem bearing Available wet or dry Counter clockwise rotation Rubber handle grips CFM @ 90 psi inlet press. Weight lbs. Length Inches 3 drilling speeds Replaceable piston stem bearing Built-in automatic oiler Available wet or dry Counter clockwise rotation Air Inlet NPT 109 17643 3/4 x 3-3/4 1-1/4 1 3400 19-21 9 15 3/8 female $660 115 5197 7/8 x 3-1/4 1-15/16 1-3/8 2900 32-36 19 18-3/8 3/8 male $1140 137 5223 7/8 x 3-1/4 2-3/8 2-5/8 2300 85-90 38 19-3/4 1/2 male $1390 5225 7/8 x 4-1/4 2-3/8 2-5/8 2300 85-90 38 19-3/4 1/2 male $1390 5227 1 x 4-1/4 2-3/8 2-5/8 2300 85-90 38 19-3/4 1/2 male $1390 155 5229 7/8 x 3-1/4 2-5/8 3 2100 110-120 61 22-3/8 3/4 male $1545 5231 7/8 x 4-1/4 2-5/8 3 2100 110-120 61 22-3/8 3/4 male $1545 5233 1 x 4-1/4 2-5/8 3 2100 110-120 61 22-3/8 3/4 male $1545 ACCESSORIES FOR ROCK DRILLS 18096 Spline Chuck for 109 Rock Drill $174.10 2116 Water Valve for Wet Head Model 137 and 155 Rock Drill 36.87 3389 Swivel Assembly for Wet Head Model 137 and 155 Rock Drill (includes: Swivel, O-Ring, Nut and Ring 85.06 Price 2 CROWDERAIRTOOLS.COM

3 Clay Diggers & Trench Diggers The rugged APT Clay and Trench Diggers are used for digging clay, shale, hard pan, and frozen ground. The Model 118 is most commonly used for clearing out dirt under existing foundations and for tunneling under existing structures. The Model 118 can be used for horizontal and for vertical work. The Model 119 is the perfect tool for digging trenches to lay pipes, phone lines, for foundation work, etc. The only difference among the APT Model 117 Paving Breaker and Models 118 and 119 is the handle, they have the same cylinders and the majority of internal parts in common. This makes them very versatile tools for use in various types of work. The Model 125 is a lighter weight tool ideal for digging medium to lightly packed soil, for light demolition work and for tunneling around existing foundations. Deep case-hardened drop forged alloy steel cylinders Replaceable chuck bushing Latch-type retainer Model 119 Model 125 Model Part No. Chuck Size In. Bore Stroke B.P.M. CFM @ 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price 118 5201 7/8 x 3-1/4 1-3/4 3-3/8 1850 34-36 31 22-1/2 3/8 male $865 5202 1 x 4-1/4 1-3/4 3-3/8 1850 34-36 31 22-1/2 3/8 male $865 119 5203 7/8 x 3-1/4 1-3/4 3-3/8 1850 34-38 37 31 1/2 female $970 5204 1 x 4-1/4 1-3/4 3-3/8 1850 34-38 37 31 1/2 female $970 125 5209 3/4 sq. x 2-3/4 1-11/16 2-3/4 2120 38-42 21 18-3/8 3/8 female $855 5210 7/8 hex x 2-3/4 1-11/16 2-3/4 2120 38-42 21 18-3/8 3/8 female $855 5211 7/8 hex x 3-1/4 1-11/16 2-3/4 2120 38-42 21 18-3/8 3/8 female $860 ACCESSORIES FOR CLAY DIGGERS AND TRENCH DIGGERS 6465 Muffler Assembly $89.61 18295 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger) $76.22 16889 Whip Hose Assembly UF, 6 x 1/2 Hose with 1/2 NPT Male Swivel $54.67 16891 Whip Hose Assembly UF, 1L, 6 x 1/2 Hose with 1/2 NPT Swivel $163.06 16893 Whip Hose Assembly UF, 2L, 6 x 1/2 Hose with 1/2 NPT Male Swivel $163.48 CROWDERAIRTOOLS.COM 3

4 APT Pneumatic Paving Breakers Airgo Ergonomic Paving Breakers The Airgo-Line Paving Breakers use the Airgo-line handle assembly which is designed to be a vibration dampening handle. The ergonomically designed handle absorbs at least 50% of the harmful vibration to the hands and arms of the operator. Paving Breaker Models 140, 160 and 190 are available as a Airgo-Line tool and come factory equipped with a Airgo-Line handle. Standard Paving Breakers Features Automatic valves Drop forged alloy steel handle Built-in automatic oiler Rubber handle grips Latch type retainer Swivel hose connection Noise dampening mufflers available Four-bolt back head Replaceable chuck bushing (except Model 140/140A) Airgo Paving Breakers - Combining Ergonomics with Power Features: Less vibration doesn't mean less power-same hitting power as standard models Vibration dampening ergonomic handle designed to absorb shock to the operator Handle is interchangeable with APT standard model, so now you can convert it into an ergonomic model in minutes Vibration isolator is easily replaceable Mufflers sold separately Model Part No. Chuck Size In. Bore Stroke B.P.M. CFM @ 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT 140A 18041 1x4-1/4 1-7/8 4-1/4 1500 48 46 24 1/2 male $1105 18099 Muffler for 140A Paving Breaker $137.65 18301 Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) 55.99 18299 Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) 96.29 160A 17746 1-1/8x6 2-1/4 4-1/8 1680 60-65 70 28-1/4 1/2 male $1165 17747 1-1/4x6 2-1/4 4-1/8 1680 60-65 70 28-1/4 1/2 male $1165 17752 Muffler for 160A Paving Breaker $137.65 18296 Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) 83.22 198298 Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) 53.25 190A 18618 1-1/8x6 2-5/8 6-1/8 1350 75-80 90 31 3/4 male $1220 18619 1-1/4x6 2-5/8 6-1/8 1350 75-80 90 31 3/4 male $1220 17753 Muffler for 190A Paving Breaker $137.65 18296 Latch Kit (includes: Retainer Latch, Bolt, Bushing, Spring, Nut, Plunger and Washer) 83.22 18581 Side Rod Kit (includes: Bolt, Spring, Lock Nut and Nut) 68.65 Price 4 CROWDERAIRTOOLS.COM

5 Standard Paving Breakers Tough and dependable, the high performance model 190 is the most powerful air tool APT makes. It is designed for big jobs such as heavy demolition and concrete breaking. The 160 model paving breaker is a versatile, hard-hitting tool that can be used for medium to heavy demolition work and concrete breaking, and is the perfect all around breaker. The model 140 is a rugged, yet lightweight, paving breaker designed for light to medium construction work. It is ideally suited for plant maintenance work such as light demolition of floors, pavement, frozen ground and masonry walls, and is very popular for bridge deck jobs. The model 140, 160 & 190 standard paving breakers are also available in an ergonomic style that APT calls their Airgo-Line. The model 117, the 30 lb. class paving breaker is the ideal tool for light to medium demolition work as well as for use in confined areas. Model 117 Model 140 Model 160 Model 190 All APT Paving Breakers Feature: Latch type retainer Automatic valves Drop forged alloy steel handle Built-in automatic oiler Rubber handle grips Swivel hose connection Noise dampening mufflers available Four-bolt back head Replaceable chuck bushing (except for Model Model Part No. Chuck Size In. Bore Stroke B.P.M. CFM @ 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price 117 5199 7/8 x 3-1/4 1-3/4 3-3/8 1850 34-38 33 21-3/4 3/8 male $825 5200 1 x 4-1/4 1-3/4 3-3/8 1850 34-38 33 21-3/4 3/8 male $825 6465 Muffler Kit for 117 $89.61 18295 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 76.22 140 17923 1 x 4-1/4 1-7/8 4-1/4 1500 48 43 21-1/8 1/2 male $880 18099 Muffler Kit for 140 $137.65 18301 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 55.99 18299 Side Rod Kit (includes: Bolt, Spring, Washer and Nut) 96.29 160 5235 1-1/8 x 6 2-1/4 4-1/8 1680 60-65 68 25-3/4 1/2 male $915 5236 1-1/4 x 6 2-1/4 4-1/8 1680 60-65 68 25-3/4 1/2 male $915 17752 Muffler Kit for 160 $137.65 18296 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 83.22 18298 Side Rod Kit (includes: Bolt, Spring, Washer and Nut) 53.25 190 5239 1-1/8 x 6 2-5/8 6-1/8 1350 75-80 93 29 3/4 male $965 5240 1-1/4 x 6 2-5/8 6-1/8 1350 75-80 93 29 3/4 male $965 17753 Muffler Kit for 190 $137.65 18296 Latch Kit (includes: Retainer Latch, Nut, 2 Cones, Washer, Bolt, Spring and Plunger 83.22 18581 Side Rod Kit (includes: Bolt, Spring, Washer and Nut) 68.65 CROWDERAIRTOOLS.COM 5

6 Rivet Busters The APT model 133 Rivet Buster was originally designed to cut rivets off metal structures. Today the Rivet Buster series is widely known for its tough, powerful tools. They have the ability to perform all types of medium to heavy demolition work. With half the weight of the 60 lb. class paving breakers, the ratio of their high impact energy versus their weight make them the most efficient tool APT makes. The model 133 meets the weight requirements for bridge deck repair work, and are also popular for cutting up underground tanks. Rivet Busters are offered in 8" and 11" stroke. The Model 133 also comes in a 4-bolt style handle which incorporates a vibration dampening feature. APT also has an outside trigger model that has a safety feature to minimize the possibility of being accidentally activated. The APT Model 633 Rivet Buster measures only 20 5/8 in length, delivering more power to those tight spaces. Weighing just 28 lbs., it s perfect for limited access work or whenever a compact, light weight and powerful tool fits the bill. This tool features an innovative cylinder design that reduces overall weight without compromising tool strength or hitting force. 1133 Rivet Buster 11" Stroke 133 Rivet Buster 8" Stroke 633 Rivet Buster 6" Stroke All Rivet Busters Feature: Deep case-hardened alloy steel cylinder uses jumbo extra heavy duty tool steel Heavy duty upper and lower sleeves Adjustable exhaust deflector Includes Whip hose Assembly (#9266) UF, 1/2" Hose x 6' with 1/2" NPT Swivel Model Part No. Bore Stroke B.P.M. CFM @ 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price 1133 17399 1-3/16 11 850 48-52 33 25-1/2 3/8 female $1235 133 5216 1-3/16 8 1140 42-46 30 22-1/2 3/8 female $1130 633 18341 1-3/16 6 1100 42-46 28 20-5/8 1/2 female $1080 ACCESSORIES 18741 Retainer Kit (includes: Spring, Bumper, Upper and Lower Sleeves) $25.89 16891 Whip Hose Assembly UF, 1L, 6 x 1/2 Hose with 1/2 NPT Swivel and Oiler $163.06 16892 Whip Hose Assembly UF, 2L, 6 x 1/2 Hose with 1/2 NPT Swivel and Oiler $184.53 6 CROWDERAIRTOOLS.COM

7 APT Chipping Hammers APT Chipping Hammers are used for scaling, chiseling, removing concrete build-up from the side of cement mixers, light concrete demolition and cement finishing, form stripping, etc. Flapper valve design allows dirt to pass without stopping the tool Deep case-hardened alloy steel cylinders Drop-forged handles Replaceable bushings Adjustable exhaust deflector Choice of optional retainers including the APT latch-type Price includes oval retainer, locking spring, 3/8 NPT inlet bushing, and Whip Hose Assembly UF, 1/2" Hose x 6' with 1/2" NPT Swivel Model 260 Series - 2 Bolt, D Handle Patented Ball Valve - more forgiving of dirt and debris, easier to maintain Ball-type throttle valve - less complicated, makes teasing the throttle easier Much easier to maintain in the field with two bolts, not four Drop-forged handle with more durable collar makes this tool stronger, longer lasting New 1/2" NPT threaded air inlet for more secure fit Available in 3" and 4" strokes Model 650 Series Traditional pistol grip handle Available in 2", 3" and 4" strokes Model Part No. Bore Stroke B.P.M. CFM @ 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT 263 18667.680R 3 1650 33-35 14 14 9/16 1/2 $450 18670.580H 3 1650 33-35 14 14 9/16 1/2 $450 264 18668.680R 4 1375 34-36 15 15 9/16 1/2 $450 18671.580H 4 1375 34-36 15 15 9/16 1/2 $450 652 5298 1-1/8 2 2100 32-34 12 13-1/4 7/8-24 $450 5299 1-1/8 2 2100 32-34 12 13-1/4 7/8-24 $450 653 5300 1-1/8 3 1650 33-35 14 15-1/4 7/8-24 $450 5301 1-1/8 3 1650 33-35 14 15-1/4 7/8-24 $450 654 5302 1-1/8 4 1375 34-36 16 16 7/8-24 $450 5303 1-1/8 4 1375 34-36 16 16 7/8-24 $450 ACCESSORIES 7022 Oval Collar for 650 Series $25.00 1941 Retainer Spring $2.58 759 Reducer Bushing 7/8-24 to 3/8 NPT Female $7.60 Price CROWDERAIRTOOLS.COM 7

8 Scalers - Needle Scalers The needle scaler cleans irregular surfaces easily. These versatile scalers remove rust, paint and other coatings from metal; peens welded joints and removes slag; cleans castings; chips stone, concrete and brick. APT's newest tool, the Scaler/Needle Scaler, is designed and crafted with the same attention to detail and careful choice of materials that have made our tools a benchmark of quality for over 60 years. A notched bayonet-style needle housing enables easy adjustment as needles wear, and allows quick conversion between needles and chisel without special tools. Standard Features: Rubber-faced throttle valve for positive seal Level-type throttle for easy control Alloy steel cylinder Models 305 (5" needles) and 307 (7" needles) include attachment with set of Model Part B.P.M. SCFM @ 90 PSI Weight (lbs.) Length (in.) Air Inlet NPT Price - Scaler with 7" needles - 307 18695 4,000 13 6.7 16-3/4 1/4 female $170 Scaler Kit - 7" needles 317 18694 $255 18569 Needle Set $14.85 Backfill Tampers Model 131 Features Built-in large automatic oiler Flapper valve design allows dirt to pass without stopping the tool Internally reinforced large 5-3/4" malleable iron butt (standard) Pole (half-moon), and 3" diameter butts available The Model 131 Backfill Tamper is used for soil compaction, temporary filling of holes, asphalt packing, etc. Applications range from foundation and pavement repair to the installation of power or telephone poles. APT offers an optional half-moon shaped pole tamping accessory for compaction around a pole as well as a 3" diameter butt for confined space compaction. Model Part No. Bore Stroke B.P.M. CFM @ 90 psi inlet press. Weight lbs. Length Inches Air Inlet NPT Price 131 5214 1-1/2 5-1/2 670 38-42 37 51-7/8 1/2 female $835 ACCESSORIES 3566 3 Diameter Butt $112.39 2655 Half-moon Pole Butt $178.45 16889 Whip Hose Assembly UF, 6 x 1/2 Hose with 1/2 NPT Male Swivel $54.67 16893 Whip Hose Assembly UF, 2L, 6 x 1/2 Hose with 1/2 NPT Male Swivel $163.48 8 CROWDERAIRTOOLS.COM

CROWDERPNEUMATICS.COM Pneumatic Post Drivers & Post Pullers Choose from Six Low-Cost Rhino Post Drivers Model specifications, Ordering Information and Pricing Complete Spec Sheets and Parts Breakdowns How to Choose a Driver Get Started Fast - Order by the Kit FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

2 Rhino Post Drivers Easily operated by one man, Rhino Post Drivers deliver up to 1700 blows per minute. One moving part, a reciprocating piston, strikes directly on the Post or Drive Cap. The Drivers have low air consumption rates, are light-weight and hand portable, ideal for driving in places that are hard to reach. All you need is enough air capacity, the recommended air pressure, a Filter- Regulator-Lubricator to assure clean air, proper pressure, plus ten drops of oil per minute, and your Rhino Post Driver will give you Fast, Low Cost driving. Alloy Steel Pistons and other features ensure little or no maintenance. 2 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

3 Rhino Post Drivers PD-55 drives a farm T post or a 12 ft channel post for a stop sign. PD-140 with special chuck and drive cap drives 4"x6" guard rail post. PD-39P Panel Post Driver drives a 1-5/8" panel post. In seconds, drive a multitude of posts... SELECT THE RIGHT SIZE FOR YOUR JOB In seconds, you can drive Telespar, Channel Posts, C Posts, Delineator Posts, Pipe, Sand Points, Ground Rods, T Posts, Anchors, Z Posts, Large Tent Pegs, I Posts, W Posts, Concrete Form Pins, Beams, Round, Square or Rectangular Tubing, Wood Posts, Stakes or any shape up to 4". Sheet Piling and Guard Rail Posts are driven with adapters. The lightweight Model PD-39 is easily operated by one man and is the perfect choice for driving all types of steel fence posts. A PD-39P Panel Post Driver ensures fast erection of temporary panel fencing. Because the PD-39's are so light in weight, the operator must pull down on the spring loaded handles to provide the correct weight for driving. The standard weight models, the PD-45/PD-55/PD-100/PD-140 are balanced to drive without help. See our web site, AirPostDrivers.com, for videos of all our Post Drivers and Post Pullers in action! Also download PDF technical spec sheets for our products. Spec Sheets Online FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 3

4 Choosing A Driver 1. WHAT ARE THE TYPES AND SIZES OF THE POSTS YOU ARE GOING TO DRIVE? Select a post or posts from the following chart. The charts also indicates which post driver with proper chuck adapter is capable of driving the post or posts you selected. You may be able to select only one driver for all the posts you want to drive. If that driver does not meet all your driving needs, you may need to select an additional driver with proper chuck adapter. (Example: Let s say you wish to drive a 1 5/8" line post, a 2" post, a 3" post, and a 4" x 6" H column guardrail post. The model PD-140 will drive all your posts. The PD-140 weighs 140 lbs and unless you plan to use lifting equipment or have very hard driving conditions, a PD-55 is more appropriate for the smaller posts while a PD-140 would be required for the 4" x 6" H column posts. 2. HOW DEEP ARE YOU GOING TO DRIVE THE POSTS? The chart assumes you will drive those posts to depths of three to five feet. The deeper you are driving the post the larger the post driver needed. (Example: A PD-55 will easily drive a 2" post three feet deep, but if you plan to drive the 2" posts ten to fifteen feet deep, for soil stabilization, you should probably use a PD-110.) 3. INTO WHAT TYPE OF SOIL ARE YOU GOING TO DRIVE THE POSTS? The chart assumes you are going to drive the posts into moist, light or medium weight soils. When driving a post, the soil has to have somewhere to go, so it is compacted beside the post, making for a very firmly set post. The heavier the soil, the fewer voids there are for the displaced soil to be compacted into. If the soil is heavy, compacted, and/or dry, it will be harder to drive the post and you may need the next larger post driver to drive the post. Rhino s Soil Definitions: Light: Beach sand, sand, soil with a high percentage of humus, etc. Medium: Soil with less humus, occasional gravel up to 1 1/2" dia., some clay, light shale content, etc. Heavy: Compacted soils, large gravel content, clay, heavy shale, asphalt, 3" to 5" concrete, etc. Note: If the soils you are driving into are dry, you can reduce driving times dramatically by wetting the ground where you are going to drive the post. It doesn t take a lot of water and it helps if you water the driving area occasionally while driving the post. You cannot drive posts in all conditions, for instance solid granite. Normally, the post hole is drilled in rock. Then the post is grouted in. If you are placing T posts in rock you can drill a smaller hole. Then drive the T post into it with a Rhino driver. It is much faster to drill a 1" hole than a 2" hole. 4 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

5 4. ARE YOU GOING TO USE LIFTING EQUIPMENT FOR YOUR POST DRIVER? If you are going to use lifting equipment to place your driver on top of the post, you should consider buying the largest Rhino driver that will drive all the posts you intend to drive. A larger post driver will drive your posts faster, give you maximum productivity and pay for the increased cost of the post driver many times over. 5. HOW MANY POSTS WILL YOU BE DRIVING ON A REGULAR BASIS? If you are driving a large number of posts, and the weight of the driver is not a problem, it will be more productive for you to buy the next larger driver. Rhino uses the following rule of thumb for post driver driving times: If the PD-45 will drive a post in two minutes, the PD-39 and PD-55 will drive the same post in one minute, the PD-110 will drive it in 30 seconds and the PD-140 will drive it in 15 seconds. These are not exact times, but will provide a good estimate. 6. WHAT CHUCK ADAPTERS DO YOU NEED? Choose the proper chuck adapters for the posts you will be driving by using Rhino Tech Data sheet, form no. 121-1. Use the misc. accessories section on the Rhino literature sheet, form no. 118, to order required or additional accessories. 7. WHAT REQUIRED OR ADDITIONAL ACCESSORIES DO YOU NEED? Required accessories are a Throttle Valve Kit and a Filter-Regulator-Lubricator. Throttle Valve Kit - Part No. 600000 - The throttle valve kit comes with a 2 foot hose whip which accommodates a 7 foot post. Order the throttle valve kit with one foot additional hose for every foot of post taller than 7 feet. (Example: If your tallest post is 10 feet, order your throttle valve kit with 3 feet of extra hose on the hose whip. You will be holding the throttle valve approximately 5 feet from the ground. The 2 feet of hose that comes with the hose whip and the additional 3 feet, totaling 5 feet, will enable you to reach to 10 feet. Filter-Regulator-Lubricator - Part No. 601128 - The filter-regulator-lubricator has three functions: The filter traps dirt coming through the hose from the air compressor and helps to remove water from the air. The regulator must be set at the proper air pressure recommended for your driver. (See Rhino literature, form no. 118) Proper air pressure is required for the safety of the operator and others working with or near the driver. The lubricator is needed so you can set it to drop 10 drops of oil per minute into the air to the driver for proper lubrication. The filter-regulator-lubricator can be mounted on your air compressor and used with other tools. If you are renting an air compressor or if the filter-regulator-lubricator will be on the ground, you should order a carrier, part no. 225000, for carrying and ease of handling. The filterregulator-lubricator should not be more the 25 feet from the post driver during operation to achieve the recommended lubrication. Additional Accessories - Rhino suggests that you consider ordering anti-vibration gloves for your operators and others working with the driver. You may also wish to consider ordering a hose reel and extra air hose to use with your driver. If you have any questions, call us at. We ll be happy to help. FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 5

6 Choosing A Driver Types & Sizes of Posts to be Driven PD-39 PD-39P PD-45 PD-55 PD-110 PD-140 Fiberglass T Posts X X X 3/4" to 1" Ground Rod X X 3/4" to 1-1/2" Reinforcing Bar Tent Stakes X X 1" Concrete Form Pins X X 1" Pipe X X X 1-1/4" to 1-1/2" Pipe X X X X X 1-5/8" Pipe X X X X X X 2" Pipe X X X X X 2-1/2" to 3" Pipe X X X X T Posts X X X X X X Telespar Posts X X X X Telespar Post Breakaway Bases (1) X X X 1.2 to 1.5 lbs/ft Channel Posts X X X X X 2 to 2.75 lbs/ft Channel Posts X X X X 3 to 4 lbs/ft Channel Posts X X X X Channel Post Breakaway Bases (2) X X X C Posts X X X X Rectangular Posts X X X X X I Beams X X X X Well Points (Sand Points) X 4" x 4" Wood Posts (3) X 4" x 6" H Column Guardrail Posts (4) X 12" Sheet Piling (5) X Silt Fence (6) X (1) To drive the telespar breakaway bases close to the ground you will need to order a special driving cap. (2) To drive the channel post breakaway bases close to the ground you will need to order a special driving cap. (3) To drive 4" x 4" wood posts you will need 4" x 4" wood post chuck, part no. 70063, for your PD-140. (4) To drive 4" x 6" h column guardrail posts you will need a 4" x 6" h column chuck, part no. 70061, and a 4" x 6" H column driving cap, part no. 70062, for your PD-140. (5) To drive 12" sheet piling you will need to order a special chuck and driving cap for your PD-140. (6) To drive fabric attached silt fence, you will need to order the special silt fence chuck for your PD-45. 6 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

7 Post Drivers: PD-39 & PD-45, PD-55 1 70006 2 70016 PD-39 Light Weight Medium Duty Post Driver with a 3-5/8" I.D. Master Chuck, uses 42 CFM @ 90PSI. Approx. Wt. 39 lbs. Panel Post Driver with a 2-1/8" I.D. Master chuck, uses 42 CFM @ 90PSI. Approx. Wt. 41 lbs. $2295 $2695 3 70330 3" I.D. Chuck Adapter $135 4 70320 2-1/2" I.D. Chuck Adapter $135 5 70319 2" I.D. Chuck Adapter $135 6 70334 Channel Post Chuck Adapter - 3 to 4 lbs/ft Posts $135 7 70337 Channel Post Chuck Adapter - 2 to 2.75 lbs/ft Posts $135 8 70338 Channel Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts $135 PD-45 1 70012 Light Duty Post Driver with a 3" I.D. Master Chuck, uses 30 CFM @ 90PSI. Approx. Wt. 46 lbs. $1350 2 70600 2-1/2" I.D. Chuck Adapter $145 3 70601 2" I.D. Chuck Adapter $145 4 70602 1-1/2" I.D. Chuck Adapter $145 5 70603 1" I.D. Chuck Adapter $145 6 70606 Channel Post Chuck Adapter - 1.2 to 1.5 lbs/ft Posts $145 1 70013 PD-55 Medium Duty Post Driver with a 3-7/8" I.D. Master Chuck, uses 42 CFM @ 90PSI. Approx. Wt. 55 lbs. $1495 2 70609 3-1/2" I.D. Chuck Adapter $155 3 70610 3" I.D. Chuck Adapter $155 4 70611 2-1/2" I.D. Chuck Adapter $155 5 70612 2" I.D. Chuck Adapter $155 6 70613 1-1/2" I.D. Chuck Adapter $155 7 70614 1" I.D. Chuck Adapter $155 8 70617 Channel Post Chuck Adapter - 1.2 to 1.5 lps/ft Posts $155 9 70618 Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts $155 10 70619 Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $155 PD-110 1 PD-110 Medium/Heavy Duty Post Driver with a 4-1/4" I.D. Master 70014 Chuck. Shipping Weight 116 lbs. $2300 2 70622 3-5/8" I.D. Chuck Adapter $165 3 70623 3" I.D. Chuck Adapter $165 4 70624 2-1/2" I.D. Chuck Adapter $165 5 70625 2" I.D. Chuck Adapter $165 6 70628 Channel Post Chuck Adapter - 1.2 to 1.5 lps/ft Posts $165 7 70629 Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts $165 8 70630 Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $165 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 7

8 Post Drivers: PD-110, PD-140, PD-200 & Accessories PD-140 1 PD-140 70015 Heavy Duty Post Driver with a 4-1/4" I.D. Master Chuck, uses 64 CFM @ 100PSI. Approx. Wt. 139 lbs. $2475 2 70634 3-5/8" I.D. Chuck Adapter $170 3 70635 3" I.D. Chuck Adapter $170 4 70636 2-1/2" I.D. Chuck Adapter $170 5 70640 6 70641 7 70642 Channel Post Chuck Adapter - 1.2 to 1.5 lps/ft Posts Channel Post Chuck Adapter - 2 to 2.75 lps/ft Posts Channel Post Chuck Adapter - 3 to 4 lps/ft Posts $170 $170 $170 8 70061 4"x6" H Column Chuck $690 9 70062 4"x6" H Column Driving Cap $750 10 70063 4"x4" Wood Post Chuck $690 PD-200 1 PD-140 070745 Heavy Duty Post Driver with a 5-1/2" I.D. Master Chuck, uses 85 CFM @ 120PSI. Approx. Wt. 205 lbs. $2955 2 70782 3-1/8" I.D. Chuck Adapter $235 3 70783 3-3/4" I.D. Chuck Adapter $235 4 70784 4-1/4 I.D. Chuck Adapter $235 5 70758 7" I.D. Chuck Adapter $955 6 70759 4"x 6" Master Chuck $995 8 70761 6"x 6" Wood Chuck $1375 9 70762 12 Special Order Per Quote PD140S / PD200S SHEET PILE DRIVER 10 70017 11 70753 PD-140S Heavy duty Sheet Pile Driver Includes slotted master chuck PD-200S Heavy duty Sheet Pile Driver Includes slotted master chuck $2750 $3425 12 70644 PD-140S 4-3/4 (120.6 mm) Round Master Chuck $675 8 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

9 1 600000 Throttle Valve Kit with 2' Host Whip (Used with Post Driver Models PD-45, PD-55, PD-100 & PD-140) $295 610024 Screen Fitting for Throttle Valve $35 4 607000 Hose Assembly 3/4 and up to 25 hose. Includes assembly labor and all parts except hose. Add $3 per foot for length of hose needed 605006 3/4" Extra Hose for Valve Kit $3.00/ft 2 601128 Filter-Regulator-Lubricator, (Used with all Post Drivers for Operator Safety & Post Driver Protection) $295 3 225000 Carrier for Filter-Regulator-Lubricator $150 5 606600 Air Line Coupler 3/4 NPT End. Air King Universal Coupling Throttle Valve Kit and/or Filter-Regulator- Lubricator connection 230401 Nipple Used with Coupling #606600 Filter-Regulator-Lubricator connection $3 6 606601 Coupler Safety Clip $0 610026 Throttle Valve Only w/ Level Guard $295 7 100047 Air Hose Reel with 100', 3/4" Air Hose Included $745 100048 100', 3/4" Air Hose Assembly $350 100295 Air Hose Reel Only $475 8 995051 Anti-Vibration Gloves - Size Small $60 995052 Anti-Vibration Gloves - Size Medium $60 995053 Anti-Vibration Gloves - Size Large $60 995054 Anti-Vibration Gloves - Size X-Large $60 995055 Anti-Vibration Gloves - Size XX-Large $60 72100 Post Drivers: Accessories PDT-45 Transport Cart Only* includes: cart, handle, wheels, axle, brackets for specified tools, as well as the following accessories: oil, hard hat, transport manual, extra bolts and washers 71201 PDT-55 Transport Cart Only* $670 71202 PDT-110 Transport Cart Only* $685 71203 PDT-140 Transport Cart Only* $685 71004 1-1/4 Low Drive Extension Drive Cap for Square Breakaway Bases 1 pin $295 71005 1-1/2 Low Drive Extension Drive Cap for Square Breakaway Bases 1-1/4 Pin $295 71006 1-3/4 Low Drive Extension Drive Cap for Square Breakaway Bases 1-1/2 Pin $295 71007 2 Low Drive Extension Drive Cap for Square Breakaway Bases 1-3/4 Pin $295 71008 2-1/4 Low Drive Extension Drive Cap for Square Breakaway Bases 2 Pin $295 71009 2-1/2 Low Drive Extension Drive Cap for Square Breakaway Bases 2-1/4 Pin $295 71014 PD-55 Chuck Adapter for Square Low Drive Extension $170 71015 PD-140 Chuck Adapter for Square Low Drive Extension $190 71017 PD-110 Chuck Adapter for Square Low Drive Extension $180 71260 2 Sch 40 Drive Cap with T-Bar and Clip $215 71261 2-1/2 Sch 40 Drive Cap with T-Bar and Clip $215 71262 3 Sch 40 Drive Cap with T-Bar and Clip $240 71263 3-1/2 Sch 40 Drive Cap with T-Bar and Clip $325 71264 4 Sch 40 Drive Cap with T-Bar and Clip $385 71295 5 Drive Cap 5.00 od pin / 5.75 od Collar $525 71306 6 Drive Cap 6.00 od pin / 6.625 od Collar $675 71308 Drive Cap (Special Order) Quote 71282 PDT-45 Transport Kit without Post Driver $1840 71283 PDT-55 Transport Kit without Post Driver $1880 71284 PDT-110 Transport Kit without Post Driver $1605 71285 PDT-140 Transport Kit without Post Driver $1615 71299 Hard Hat $16.50 $45 $7 $670 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 9

10 Kit Packages From Rhino PD-45 PACKAGES 1 071268 Rhino PDT-45 Total Solution includes Transport Accessories as well as PD-45 Light Duty Post Driver PD-45 2-1/2" (63.5mm) Chuck Adapter PD-45 2" (50.8 mm) Chuck Adapter PD-45 1-1/2" (38.1 mm) Chuck Adapter PD-45 1" (25.4 mm) Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable. 2 071215 Rhino PDT-45 Transport Kit includes Transport Accessories as well as PD-45 2-1/2" (63.5mm) Chuck Adapter PD-45 2" (50.8 mm) Chuck Adapter PD-45 1" (25.4 mm) Chuck Adapter PD-45 Channel Post Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose * Note: Chuck adapter selection is customizable. 3 071276 Rhino PD-45 Utility Kit includes PD-45 Light Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose 4 071272 Rhino PD-45 Economy Kit includes PD-45 Light Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $4110 $3190 $3950 $2300 PD-55 PACKAGES 1 071269 Rhino PDT-55 Total Solution includes Transport Accessories as well as PD-55 Medium Duty Post Driver PD-55 3" (76.2 mm) Chuck Adapter PD-55 2-1/2" (63.5 mm) Chuck Adapter PD-55 2" (50.8 mm) Chuck Adapter PD-55 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable. 2 071216 Rhino PDT-55 Transport Kit includes Transport Accessories as well as PD-55 Medium Duty Post Driver PD-55 3" (76.2 mm) Chuck Adapter PD-55 2-1/2" (63.5 mm) Chuck Adapter PD-55 2" (50.8 mm) Chuck Adapter PD-55 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose * Note: Chuck adapter selection is customizable. 3 071277 Rhino PD-55 Utility Kit includes PD-55 Medium Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose 4 071273 Rhino PD-55 Economy Kit includes PD-55 Medium Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $4325 $3375 $4145 $2465 10 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

11 Kit Packages From Rhino PD-110 PACKAGES 1 071270 Rhino PDT-110 Total Solution includes Transport Accessories as well as PD-110 3-5/8" (92 mm) Chuck Adapter PD-110 2-1/2" (63.5 mm) Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable. 2 071217 Rhino PDT-110 Transport Kit includes Transport Accessories as well as PD-110 3" (76.2 mm) Chuck Adapter PD-110 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose * Note: Chuck adapter selection is customizable. 3 071278 Rhino PD-110 Utility Kit includes PD-110 Medium/Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose 4 071274 Rhino PD-110 Economy Kit includes PD-110 Medium/Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $4855 $3905 $4975 $3280 PD-140 PACKAGES 1 071271 Rhino PDT-140 Total Solution includes Transport Accessories as well as PD-140 3-5/8" (92 mm) Chuck Adapter PD-140 3" (76.2 mm) Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) * Note: Chuck adapter selection is customizable. 2 071218 Rhino PDT-140 Transport Kit includes Transport Accessories as well as PD-140 3" (76.2 mm) Chuck Adapter PD-140 Channel Post Chuck Adapter Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator and 5 ft. of Hose * Note: Chuck adapter selection is customizable. 3 071279 Rhino PD-140 Utility Kit includes PD-140 Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose MP-3 Manual Post Puller (includes Post Grabber and Chain) Air Hose Reel with 100' Hose 4 071275 Rhino PD-140 Economy Kit includes PD-140 Heavy Duty Post Driver & Hard Hat 1 Chuck Adapter (Size to be Specified by Customer) Throttle Valve Kit with 15 ft of Hose Filter-Regulator-Lubricator with Carrier and 5 ft. of Hose $5040 $4090 $5155 $3460 5 070063 Rhino PD-140 Wood Add-On 4" x 4" (101 mm x 101 mm) Wood Post Chuck Add to any of the PD-140 Kits 6 070061 070062 Rhino PD-140 Economy Kit Guard Rail Add-On 4" x 6" (101 mm x 152 mm) H Column Chuck 4" x 6" (101 mm x 152 mm) H Column Cap Add the Chuck and Cap to any of the PD-140 Kits $690 $690 $750 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 11

12 Post Pullers Crowder Supply carries the Rhino line of both Manual and Hydraulic Post Pullers. See our web site, AirPostDrivers.com, for videos of all our Post Drivers and Post Pullers in action! Also download PDF technical spec sheets for our products. Spec Sheets Online 12 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

13 Post Pullers The Low Cost Answer for Pulling Posts PL-3 HYDRAULIC POST PULLER Pulls a 3/4" ground rod, 10 ft deep Pulls a 4"x6" steel guard rail post, 3 ft deep Pulls a standard 4" square wood post, 3 ft deep 1 PL-3 071000 PL-3 PL-3 Post Puller $1095 2 071040 Post Grabber $399 3 071041 Panel Post Grabber $95 4 071042 Tent Stake Puller $95 MP-3 MANUAL POST PULLER With a Panel Post Grabber, pulls a 1-5/8" line post Pulls a 1-5/8" line post, 3 ft deep Pulls a 4"x4" wood post, 3 ft deep 1 MP-3 071012* MP-3 MP-3 Post Puller *The Model MP-3 Part# 071012, includes the Chain Assembly(4) and Post Grabber(2) $950 2 071040 Post Grabber $399 3 071041 Panel Post Grabber $95 4 220422 Chain Assembly $165 5 071042 Tent Stake Puller $95 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM 13

14 CROWDER SUPPLY CO. INC. Email: bart@crowdersupply.com Phone: (toll free) 303-433-5144 Fax: 303-433-3928 Address: 8495 Roslyn Street Commerce City, CO 80022 Pneumatic Post Drivers and Post Pullers Model specifications, Ordering Information and Pricing Complete Spec Sheets and Parts Breakdowns How to Choose a Driver Get Started Fast - Order by the Kit CrowderSupply.com CrowderPneumatics.com CrowderHydraulicTools.com CrowderAirTools.com AirPostDrivers.com 14 FOR CURRENT PRICING AND A COMPLETE PRODUCT LIST VISIT - AIRPOSTDRIVERS.COM

HIGH VELOCITY JET FANS AIR MOVERS AIR MANIFOLDS / TANKS FOUNDRY TOOLS PAGE 2 PAGE 5 PAGE 7 PAGE 9 PAVING BREAKERS / CLAY DIGGER CHIPPING HAMMERS ROCK DRILLS RIVET BUSTERS PAGE 10 PAGE 11 PAGE 13 PAGE 14 NEEDLE/CHISEL SCALER LONG READH SCLAER AIR SCRIBE PARTS & ACCESSORIES FOR RIVET BUSTERS & CHIPPING HAMMERS FLTER-REGULATOR- LUBRICATOR SYSTEMS LUBRICATORS & HOSE WHIP ASSEMBLIES OTHER PARTS & ACCESSORIES ROCK DRILLS PAGE 15 PAGE 20 PAGE 24 PAGE 31 USA-AIRTOOLS.COM

2 HIGH VELOCITY JET FANS This four-bladed vane axial fan is called a Jet Fan because a high-velocity jet of compressed air is ejected from the trailing edge of the blade. This results in the forward rotation of the fan wheel just like a jet plane is pushed forward by the highvelocity jet ejected from the rear of the jet engine. Use for general ventilation in any location where compressed air is available. Use as blower or exhauster. Suited for ventilation of tanks, process vessels, or other confined areas for the removal of hazardous fumes or contaminated air from welding, sandblasting and other operations. Rated operating pressure 40-110 PSI. Design allows for lower RPMs while still moving more air. Bearings are packed with a hi-tech synthetic lubricant for longer life. Propeller precision balanced by removing material from end of blades. Electro polished stainless steel fan guard. Heat-treated to T6 aircraft aluminum specifications. Super-duty, high quality, high pressure air seal for longer service. Heaviest-duty fan in the industry. TECHNICAL DATA Hi-tech four blade design. Guide vanes to eliminating turbulence which smooths air flow and increases efficiency. Fan design by one of the foremost fan engineers in the world. Model Description Flange Dia. Weight (lb) TXJF12 12" Jet Fan 12 41 3/4" FPT TXJF16 16" Jet Fan 16 63 3/4" FPT TXJF20 20" Jet Fan 20 95 3/4" NPT TXJF24 24" Jet Fan 24 132 1" NPT Inlet Max PSI Compressed Air Pressure (psi) 120 40 60 80 100 120 120 40 60 80 100 120 110 40 60 80 100 110 40 60 80 100 Compressed Air Consumption (cfm) 55 78 101 130 141 54 79 100 128 139 60 114 186 292 76 147 225 338 Air Flow (Free Flow) 1684 2161 2550 2866 3120 2541 3349 3702 4216 4774 Avg RPM 3190 4200 5021 5805 6305 2173 2896 3279 3792 4311 2080 2695 3225 3670 1565 2053 2570 3138 Price $2,098.95 $2,413.95 $2,863.63 $5,110.09 Accessories AM29 Grounding Clamp with 6 ft. of Wire $11.81 TXJFRF Jet Fan Refurbishing Kit $776.53 TXJFRK Jet Fan Repair Kit $361.91 Spare Parts Lists available at USA Airtoosl.com 2 USA-AIRTOOLS.COM

3 SWING GATE What is a Swing Gate? This device is used to provide an additional entry/exit point for a confined space. Typically, a fan is bolted directly to a tank flange. Once bolted in place, the opening can only be used by the fan for ventilating the confined space. A swing gate will still allow the opening to be used as a ventilation point, but it can also be used as an additional entry/exit point in case of emergency. A worker inside of a tank would need to gently push on the hand paddle that is molded into the casting. The fan will swing away and allow the worker to exit the space. A worker on the outside of a tank would merely pull on the flange of the Jet Fan to swing the fan away and allow for entry into the space. The flange is kept closed by a magnet. There are no locking devices. The magnet is a superior mechanism to our competitor's method of a hook & loop fastener (similar to Velcro). The magnet will not lose adhesion over time or deteriorate by weather. A slight bump or tug is all that is needed to push or pull the fan open. Mounting the Jet Fan on the Swing Plate with the air inlet towards the hinge will not inhibit the ability to open the gate. In addition, the Jet Fan's grounding wire should also be affixed on the hinge side of the unit. All exposed components are stainless steel or aluminum. Mounting flange configured to match tank flanges with holes starting in top center position OR level across the centerline. Our competitor's gates can only be used for flanges mounted with the top two holes level across the centerline. Heat treated to T6 aircraft aluminum specifications. Stainless Steel Shackle used for lifting point. Unit shipped with Stainless 1" bolts, flat washers, lock washers and nuts for attaching a Jet Fan to the Swing Plate. Part No. Description Price TXSG20 20" Swing Gate $2,362.50 TXSG24 24" Swing Gate $2,625.00 WATER DRIVEN FAN Shipped with supply-type fan blade unless exhaust blade is specified. Optional exhaust blades can be purchased separately. Not made in the USA Part No. Description Flange Dia. Weight (lb) Water Pressure (psi) Air Flow (Free Flow) Water Cons (gal/ min) Avg. Rpm Water Pressure (psi) Air Flow (Free Flow) Water Cons (gal/ min) Avg. RPM Price TXWD12 12" Water Driven Fan TXWD16 16" Water Driven Fan 18 56 100 125 150 3463 3845 4096 160 182 193 4366 4857 5185 100 125 150 2245 2815 3269 106 134 155 2827 3552 4097 $3,675 22 69 100 125 150 4479 5567 6119 156 190 209 2585 3214 3532 100 125 150 3455 4329 5029 125 153 174 1981 4491 2900 $4,200 Accessories TXJFRF Jet Fan Refurbishing Kit $776.53 TXJFRK Jet Fan Repair Kit $361.91 USA-AIRTOOLS.COM 3

4 AIR DUCTING Our air ducting (TX-SAC-N-GO) is available in three sizes, 8", 12" and 16" diameters. The ducting is made of single-ply PVC coated polyester fabric with a spring steel wire helix and external PVC wear strip. The ducting has its own storage bag attached to the cuff end. Simply attach the cuff end to the air movement device and pull the opposite end from the bag and place into position. When finished, the hose can easily be put back into the bag for storage and carrying. Our design allows multiple bags to be combined for long duct runs. No additional connectors are needed. The end of one hose can be inserted into the cuff end of another. All ducting can be placed on either end of an air mover for fan. The hose can be used for supply or suction. The TX-SAC-N-GO-8 is designed to be used with the TX-3AM and TX-3AMS. The TX-SAC-N-GO-12 is designed to be used with the TX-6AM or the new TX-JF12 Jet Fan The TX-SAC-N-GO-18 is designed to be used with the TX-8AM, TX-10AM or the new TX-JF16 Jet Fan. NOT made in the USA Part No. Description Price TXSAC-N-GO-8 8" Ducting $257.25 TXSAC-N-GO-12 12" Ducting $288.75 TXSAC-N-GO-18 16" Ducting $357.00 AIR RECEIVER TANKS Part Number Description Price 200ARV200 Vertical Air Receiver Tank - 2" NPT $1,875.00 200ARV200C Caged Vertical Air Receiver Tank - 2" NPT $3,290.00 240ARV200 Vertical Air Receiver Tank - 2" NPT $2,370.00 240ARV200C Caged Vertical Air Receiver Tank - 2" NPT $2,920.00 400ARV200 Vertical Large Size ASMI Vacuum Tank $2,435.00 60ARV200 Vertical 60 Gallon Air Receiver Tank $625.00 FM20H Horizontal Air Receiver Tank - 2" NPT $1,285.00 FM20HC Caged Horizontal Air Receiver Tank - 2" NPT $1,650.00 FM25H Horizontal Air Receiver Tank - 2" NPT $1,540.00 FM25HC Caged Horizontal Air Receiver Tank - 2" NPT $2,000.00 FM35H Horizontal Air Receiver Tank - 2" NPT $1,735.00 FM35HC Caged Horizontal Air Receiver Tank - 2" NPT $2,285.00 4 USA-AIRTOOLS.COM

5 Air Movers Venturi Type Air Movers Air movers, or air horns, are used wherever there is a need to disperse fumes, move air into confined spaces, cool men working in elevated temperature conditions, or cool machinery or products with a blast of directed air. Common applications are found in refineries, chemical plants, utilities and cogeneration units, metal fabrication plants, paper and pulp plants, shipyards, the marine industry and the steel industry. No moving parts Used for venting hazardous areas Maintenance is minimal Can be used as a blower or exhauster Operates on compressed air or steam Connection for ground wire Tested at an independent laboratory to AMCA Standard 210, equaling or exceeding the air flow of competitively manufactured air movers Shipped complete with grounding wire and crowsfoot Part No Description Inside Dia. of Base Overall Length Outside Dia. of Base Dia. at top of Horn NPT Size Bolt Circle Dia. Base Slot Dia. Weight (lb) TX3AM 3" Air Mover 3 16.75 7.31 6.0 1/2 6.56 0.4 5.5 $250.00 TX3AMS 3" Air Mover 3 30.5 7.31 7.0 1/2 6.56 0.4 8.5 $235.00 Short TX3AMSH 3" Air Mover 3 16.75 7.31 6.0 1/2 6.56 0.4 5.5 $430.00 w/ Stainless Steel Horn TX6AM 6" Air Mover 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $310.00 TX6AMP 6" Air Mover w/ Plastic Horn 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $710.00 TX6AMSH 6" Air Mover 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $415.00 w/ Stainless Steel Horn TX6AMS 6" Air Mover - 6 44.25 11.25 12.5 1 10.5 0.4 22.3 $710.00 All Stainless Steel TX8AM 8" Air Mover 8 46.06 14.37 14.25 1 13.62 0.5 36.0 $515.00 TX10AM 10" Air Mover 10 48.0 17.0 15.75 1 15.5 1.0 42.1 $770.00 AMIS30 Air Mover Stand $440.00 Price Spare parts lists available at USA-Airtools.com USA-AIRTOOLS.COM 5

6 VENTURI AIR MISTERS If you have a sufficient compressed air source and a potable water hose connection you can achieve a 10F to 30F drop in the ambient temperature throughout the path of air exiting the air mover (depending on the humidity of the ambient air). The optimum cooling begins after the first 10 feet of air exiting the end of the air horn diffuser. Atomized Mist - Water/air mixed "Atomized Mist" combined with compressed air powered air movement Evaporative Cooling - in arid climates. Provides evaporative cooling effect. Misting and Air - Misting amplified greatly by the air movement of the Venturi Air Mover. Outdoor Event - Hotspots in outdoor construction, turnarounds, shutdowns, outages. Reduces heat exhaustion Reduces heat stress Part No Description Total Air Flow (80 psi) Air Consumed (80psi) Weight (lb) Length Price VAM3S/S VAM3S Air Mister with Stand 1182 cfm 62 cfm 32 17 $840.00 VAM3S VAM3S Air Mister without Stand 1182 cfm 62 cfm 7 17 $605.00 VAM3/S VAM3 Air Mister with Stand 1462 cfm 62 cfm 35 31 $840.00 VAM3 VAM3 Air Mister without Stand 1462 cfm 62 cfm 9 31 $605.00 VAM6/S VAM6 Air Mister with Stand 3347 cfm 124 cfm 49 45 $945.00 VAM6 VAM6 Air Mister without Stand 3347 cfm 124 cfm 24 45 $815.00 VAM8/S VAM8 Air Mister with Stand 4929 cfm 193 cfm 62 47 $1,050.00 VAM8 VAM8 Air Mister without Stand 4929 cfm 193 cfm 37 47 $920.00 VAM10/S VAM10 Air Mister with Stand 7304 cfm 274 cfm 69 50 $1,155.00 VAM10 VAM10 Air Mister without Stand 7304 cfm 274 cfm 44 50 $1,025.00 Spare Parts List Available at USA-Airtools.com 6 USA-AIRTOOLS.COM

7 AIR MANIFOLDS The Texas Pneumatic Air Manifold can be used in any industry where there is a need to have multiple outlets of air to supply various pneumatic tool simultaneously. The manifold comes with a 1-1/2" air inlet and can be dispersed through and up to six separate 3/4" Chicago couplings. Each outlet is regulated by a bronze safety lock on/off selfrelieving ball valve. For an adequate air supply to each tool use the formula: Air Tool Consumption x Number of Tools = CFM Required Part No. Description Weight (lb) Height Diameter Inlet Size No. of Outlets Price TX1AMF TX-1AMF Air Manifold 102 15 36 1-1/2 6 $1,215.00 TX10017 Air Manifold Filter Kit $31.08 AIR MANIFOLDS WITH WATER FILTER Water filters (particulate filters) produce clean, dry air at the tool preventing rust and clogging which reduces downtime of tools and saves money Conveniently manufactured to save you time Cage protects valves and makes it easy to roll around Ball valves control the number of outlets available Pressure relief valve provides protection against excessive pressure buildup Part No. Description Weight (lb) Height Diameter Inlet Size No. of Outlets Price TX1AMF-WF TX-1AMF-WF Air Manifold with Water Filter 114 22.5 36 1-1/2 6 $1,480.00 TX10017 Filter Replacement Kit $31.08 USA-AIRTOOLS.COM 7

8 A.S.M.E. CERTIFIED AIR MANIFOLDS Texas Pneumatic proudly introduces the TX-3AMF, the second in its series of ASME approved manifolds. This smaller version is much more accommodating to carry into confined spaces such as airliners for cabin and seat repair. It fits neatly into large toolboxes for storage. It can be equipped with universal (crowsfoot type) couplers or 1/4", 3/8" or 1/2" quick disconnect industrial couplers with hose barb plug included. Both sizes can be used in tandem to provide as many outlets as needed Keep work site uncluttered by having only one hose going to work area Both meet all OSHA guidelines: ASME approved tank ASME pop-off valve (200 psi) to prevent excessive pressure buildup Equipped with a gauge to monitor working pressure Brass drain cock to vent water droplets The larger air receivers/air manifolds provide a dual purpose for your air handling systems. They help to maintain a constant stable pressure and store a greater volume of air. They also provide a greater range of outlet sizes to match the required applications. Both have two 2" ball valves for use in high volume requirements such as sand blasting. For other requirements, they are equipped with four 1" ball valves and two 3/4" ball valves. A liquid filled pressure gauge helps to eliminate misreading caused by pulsation of air set up in the compression process. The drain cock is left slightly open to drain moisture from the air receiver. A high volume air relieving valve (spring loaded) is set to prevent the receiver from exceeding the maximum allowable working pressure of the air receiver by no more than 10% (a guideline of the ASME code). User ready on delivery Easily bolts to skids or other surfaces Multiple manifolds can be used in tandem Helps maintain a cleaner work site Part No. Description Weight (lb) Height Length Tank Dia. Tank Cir. Width Inlet Size No of Outlets Work Pressure (psi) Capacity (gal) Price TX2AMF TX-2AMF Air Manifold 63 18 39 12 37.75 22 2 8-3/4 200 15 $680 TX3AMF TX-3AMF Air Manifold 21-23 12 20 8 25.75 14 1 4 200 2.5 $520 TX3AMF- QC500 TX3AMF- QC250 TX3AMF- QC375 TX-3AMF Air Manifold with 1/2" Quick Connect TX-3AMF Air Manifold with 1/4" Quick Connect TX-3AMF Air Manifold with 3/8" Quick Connect 21-23 12 20 8 25.75 14 1 4 200 2.5 $570 21-23 12 20 8 25.75 14 1 4 200 2.5 $520 21-23 12 20 8 25.75 14 1 4 200 2.5 $570 TX4AMF TX-4AMF Air Manifold 115 27 46 16 50.5 36 2 8 200 30 $1,320 TX5AMF TX-5AMF Air Manifold 193 32 60 20 63.5 39 2 8 200 60 $1,395 TX750FRDD Paint Spray Air Filtering System $1,280 8 USA-AIRTOOLS.COM

9 FOUNDRY TOOLS Bench Rammer, Sand Rammer and Backfill Tamper The Texas Pneumatic rammers are proven in the field. They have a smooth-finished, black-oxided body. They are tough, yet easy to handle. These rammers can be used in various applications for foundry purposes, as well as constructionrelated areas. Made in USA High performance with minimum operator fatigue Easy start and stop features Lightweight rugged construction Adjustable packing gland Fast hitting Greatly improves the quality of casting in all types of foundry applications Tool Applications Packing Sand Packing plastic alumnea in fire walls Packing cast stone Part No Description Air Cons. (cfm) Stroke Weight (lbs) Bore BPM Taper Inlet Min Hose Size OAL Incl. Butt Price TX70B Sand Rammer 15 2 6-8oz 1 1500 802 1/4" NPT 3/8 16 $415 TX8-2.5 Bench Rammer 13 2-1/2 7 1 1725 802 3/8 1/2 16-1/2 $525 TX8-4 Bench Rammer 19 4 10 1 1240 802 3/8 1/2 21-1/2 $720 TX00 Sand Rammer 12 2 4.7 1600 401 3/8 - - $320 TX6TN Backfill Tamper 38.5 5.5 40 1.5 800 804 1/2 - - $915 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 9

10 PAVING BREAKERS Paving Breakers The 90# Paving Breaker is designed for big jobs such as heavy demolition and concrete breaking. The 60# Paving Breaker is a versatile, hard-hitting tool that can be used for medium to heavy demolition work and concrete breaking, and is the perfect all around breaker. The 40# and 30# Paving Breaker is a rugged, yet lightweight paving breaker designed for light to medium construction work. It is ideally suited for plant maintenance work such as light demolition of floors, pavement, frozen ground and masonry walls and is very popular for bridge deck work. Thor Tools Part No Description Weight (lb) Length Bore Stroke BPM Chuck Size Air Inlet (NPT) Air Cons (cfm) TX30PB-7/8 30# Paving Breaker 34 22.5 1.75 3.375 1550 7/8x3-1/4 3/8 49 $1,010 TX30PB-1 30# Paving Breaker 34 22.5 1.75 3.375 1500 1x4-1/4 3/8 49 $1,010 TX40PBE 40# Paving Breaker 42 25.125 1.73 5.75 900 1x4-1/4 1/2x3 /4 56 $1,110 TX60PB-1-1/4 60# Paving Breaker 67 25.625 2.25 4.0937 1400 1-1/4x6 3/4 59 $1,120 TX60PB-1-1/8 60# Paving Breaker 67 25.625 2.25 4.0937 1400 1-1/8x6 3/4 59 $1,120 Price TX90PB-1-1/4 90# Paving Breaker 92.5 28.75 2.625 6.0625 1250 1-1/4x6 3/4 75 $1,215 TX90PB-1-1/8 90# Paving Breaker 92.5 28.75 2.625 6.0625 125 1-1/8x6 3/4 75 $1,215 The TX30CD comes in a chuck sizes of either 7/8" x 3-1/4" or 1" x 4-1/4". The proper hose whip assembly for use with this tool is assembled with a TX1L lubricator. The tool requires 49 cfm at 90 psi for most efficient operation, and the TX1L is capable of delivering 70 cfm through the lubricator. It will allow the 49 cfm to pass through the tool at 90 psi and when filled with a high quality lubricant, the tool is adequately lubricated as it works. Part No. Description Weight (lb) Length Bore Stroke BPM Chuck Size Air Inlet (NPT) Air Cons. (cfm) TX30CD- 7/8 Clay Digger 30 23 1.75 3.375 1550 7/8 x 3-1/4 3/8 49 $1,040 TX30CD-1 Clay Digger 30 23 1.75 3.375 1550 1 x 4-1/4 3/8 49 $1,040 Price Spare Parts List Available at USA-Airtools.com 10 USA-AIRTOOLS.COM

11 CHIPPING HAMMERS 4-Bolt Chipping Hammer With 2", 3" and 4" cylinder option, Texas Pneumatic offers a very complete range of chipping hammers for all types of construction and industrial applications. Quick Change Retainer for ease in changing tools Hose swivel so hose tracks operator movement Lubricator to enhance tool life Rugged construction for use in shipyards, refineries and oil field equipment manufacturers Price includes a TX-4HW Hose Whip Assembly and a 1291-TPT2 Deluxe Quick Change Retainer Texas Pneumatic is proud to offer chipping hammers completely made in the USA. We will guarantee the quality of this chipping hammer versus any chipping hammer in the world. Part No. Description Bore Piston Stroke BPM Hose Size Overall Length Air Cons (cfm) Weight (lb) Price TXCH2-4B-H 4-Bolt Chipping Hammer - Hex TXCH2-4B-R 4-Bolt Chipping Hammer - Rnd TXCH3-4B-H 4-Bolt Chipping Hammer - Hex TXCH3-4B-R 4-Bolt Chipping Hammer - Rnd TXCH4-4B-H 4-Bolt Chipping Hammer - Hex TXCH4-4B-R 4-Bolt Chipping Hammer - Rnd 1-1/8 2 2100 1/2 14-1/2 32-34 18 $455.00 1-1/8 2 2100 1/2 14-1/2 32-34 18 $455.00 1-1/8 3 1650 1/2 15-1/2 33-35 19 $455.00 1-1/8 3 1650 1/2 15-1/2 33-35 19 $455.00 1-1/8 4 1375 1/2 16-1/2 34-36 20 $455.00 1-1/8 4 1375 1/2 16-1/2 34-36 20 $455.00 Accessories TX4HW Hose Whip Assembly $67.05 1291-TPT2 Deluxe Quick Change Retainer $85.85 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 11

12 CHIPPING HAMMERS With 2", 3" and 4" cylinder option, Texas Pneumatic offers a very complete range of chipping hammers for all types of construction and industrial applications. Rocker valve assembly for less maintenance American quality forged steel handle Three sizes: 2", 3" and 4" stroke pistons Available with round or hex busing High quality alloy steel barrel Texas Pneumatic is proud to offer chipping hammers completely made in the USA. We will guarantee the quality of this chipping hammer versus any chipping hammer in the world. Part No. Description Piston Dia. Piston Stroke BPM Hose Size Overall Length Air Cons (cfm) Weight (lb) Price TXCH2-H Chipping Hammer - Hex 1-1/8 2 2100 1/2 16-1/4 32 15.7 $530.00 TXCH2-R Chipping Hammer - Rnd 1-1/8 2 2100 1/2 16-1/4 32 15.7 $530.00 TXCH3-H Chipping Hammer - Hex 1-1/8 3 1650 1/2 17-23/32 33 16.7 $530.00 TXCH3-R Chipping Hammer - Rnd 1-1/8 3 1650 1/2 17-23/32 33 16.7 $530.00 TXCH4-H Chipping Hammer - Hex 1-1/8 4 1375 1/2 19-7/32 34 18.1 $530.00 TXCH4-R Chipping Hammer - Rnd 1-1/8 4 1375 1/2 19-7/32 34 18.1 $530.00 Accessories TX4HW Hose Whip Assembly $67.05 1291-TPT2 Deluxe Quick Change Retainer $85.85 Spare Parts List Available at USA-Airtools.com 12 USA-AIRTOOLS.COM

13 ROCK DRILLS Part No. TX18HD TX30RD-3-1/4 TX30RD-4-1/4 TX60RD-3-1/4 TX60RD-4-1/4 TX60RD-1 Description 18# Hammer 30# Rock Drill 30# Rock Drill 60# Rock Drill 60# Rock Drill 60# Rock Drill Weight (lbs) 17.75 30 30 61 61 61 Length 18.375 18.5 18.5 23.75 23.75 23.75 Bore 1.9375 1.125 1.125 2.625 2.625 2.625 Stroke 1.89 1.75 1.75 3.22 3.22 3.22 BPM 2900 2450 2450 2250 2250 2250 RPM 250 250 200 200 200 Chuck Size Air Inlet (NPT) Air Consumption (cfm) 7/8 x 3-1/4 7/8 x 3-1/4 7/8 x 4-1/4 7/8 x 3-1/4 7/8 x 4-1/4 1 x 4-1/4 3/8 1/2 1/2 3/4 3/4 3/4 36 56 56 98 98 98 Price $1,325 $1,330 $1,330 $1,855 $1,855 $1,855 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 13

14 RIVET BUSTERS TX-133 Rivet Buster Pound for pound, there is no hammer with more hitting power than a rivet buster. Even a paving breaker would need to be at least twice as heavy to deliver an equivalent blow. This super-power can still be controlled thanks to low blow frequency and teasing throttle. That's why the rivet buster is one of the favorite tools of demolition contractors in the US. Users have discovered many new applications for rivet busters for working in both concrete and steel. No longer is the buster used exclusively by iron workers for forming and cutting rivets, but is has now found its way into the hands of operators who need the most powerful tool for the job. Guaranteed to be of the highest quality. American high tech made! Tenths of thousands clearance on the valve assembly Positive retention of rivet buster piston to prevent possible injuries Uses a steel throttle valve Two-step piston design Barrel cylinder has a bridge built in for safety - piston will not fall out or be shot out of tool avoiding personal injury Extra Features Jumbo safety retainer Rugged steel machined handle Adjustable exhaust deflector Heat treated polished steel barrel The TX-133RB is designed to operate at 90 psi. It is built to use jumbo steel and upper/lower sleeve and can be converted to run standard steel if desired. Shipped with hose whip assembly with filter lubricator, 2 upper sleeves, 2 lower sleeves, 2 rubber bumpers and 2 springs Part No. Description Stroke Weight (lb) Length Bore BPM Chuck Air Inlet Air Cons (cfm) Price TX133-6RB Rivet Buster 6" 6 26 20.5 1-3/16x6 1500 Jumbo.866 3/8 44 $1,120 TX133-6RB-OT Rivet Buster 6" Outside Trigger 6 26 20.5 1-3/16x6 1500 Jumbo.866 3/8 44 $1,120 TX133-8RB Rivet Buster 8" 8 30 22.5 1-3/16x8 1400-1600 Jumbo.866 3/8 44 $1,155 TX133-8RB-OT Rivet Buster 8" Outside Trigger 8 30 22.5 1-3/16x8 1400-1600 Jumbo.866 3/8 44 $1,155 TX133-11RB Rivet Buster 11" 11 33 25.5 1-3/16x11 850 Jumbo.866 3/8 44 $1,450 TX133-11RB- OT Rivet Buster 11" Outside Trigger 11 33 25.5 1-3/16x11 850 Jumbo.866 3/8 44 $1,450 Spare Parts List Available at USA-Airtools.com 14 USA-AIRTOOLS.COM

15 NEEDLE / CHISEL SCALERS TX1B Needle/Chisel Scaler Texas Pneumatic scalers have been proven throughout the industrial job sites, as well as construction and marine repair industry. Made in the USA World class value pricing Quality equal to or better than competitively made scalers Tools have been proven in thousands of applications Tens of thousands of these tools are in the field Completely convertible from needle to chisel scaler and visa versa Tool Applications De-rusting and cleaning metals Peening of welded joints Cleaning castings Cleaning welding slag Removing barnacles Removing paint, rust and dirt Chipping stone, concrete and brick Needle scalers adjust to any surface contour automatically Part No. Description Weight (lb) Length Air Cons (cfm) Bore Stroke BPM Inlet (NPT) Min Hose Size Price TX1BLTCS Chisel Scaler - Lever Throttle TX1BPTCS Chisel Scaler - Push Throttle TX1BLTNS Needle Scaler - Lever Throttle TX1BPTNS Needle Scaler - Push Throttle TX1BLTNSW7 Needle Scaler - Lever Throttle 5 15" with chisel 5 15" with chisel 7 17" with 5" needles 7 17" with 5" needles 7 19" with 7" needles 12 1 1-1/8 4600 1/4" 3/8 $125 12 1 1-1/8 4600 1/4" 3/8 $135 12 1 1-1/8 4600 1/4" 3/8 $175 12 1 1-1/8 4600 1/4" 3/8 $190 12 1 1-1/8 4600 1/4" 3/8 $225 TX1BLTNS- 2MM Needle Scaler - Lever Throttle 7 17" with 5" needles 12 1 1-1/8 4600 1/4" 3/8 $200 TX1BLTNS- 4MM Needle Scaler - Lever Throttle 7 17" with 5" needles 12 1 1-1/8 4600 1/4" 3/8 $200 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 15

16 NEEDLE / CHISEL SCALER Accessories TX1BLTNS-MK TX1B Millennium Needle Scaler Kit $245.00 TX1BLTNS-VT Primary Vacuum Attachment Only $165.00 TX1BLTNS-V Primary Vacuum Attachment Only w/ Case $430.00 TX1BLTNS-VK Vacuum Attachment Complete $715.00 TX1BCOCS-NR Coke Oven Chisel Scaler (Non-Revolving) $170.00 TX456TS-FT Tomato State Tool $300.00 TX1BNSRK TX1B Needle Scaler Repair Kit $109.39 TX1BCSRK TX1B Chisel Scaler Repair Kit $43.08 Chisels and Needles TX00047 7" Flat Chisel (3/4" W) $7.96 TX00048 6-1/2" Spoon Chisel (1-3/8" W) $8.56 TX00049 6-1/2" Flat Chisel (1-3/8" W) $8.56 TX00050 7" Hardened Blank Chisel $6.26 TX00051N 12" Flat Chisel (3/4" W) $10.12 TX00051W 12" Flat Chisel (1-3/8" W) $10.93 TX00052 12" Spoon chisel (1-3/8" W) $10.93 TX00054N 18" Flat Chisel (3/4" W) $12.96 TX00054W 18" Flat Chisel (1-3/8" W) $13.41 TX00055 18" Spoon chisel (1-3/8" W) $13.41 TX00018 Needles - Stainless 5" $1.08 TX00019 Needles - Stainless 7" $1.29 TX00024 7" x.125 Steel Scaler Needle $1.00 TX00043 5" x.125 Steel Scaler Needle $1.00 TX00057 7" x 0.78 (2mm) Steel Scaler Needle $1.00 TX00058 7" x.117 (3mm) Steel Scaler Needle $1.00 TX00059 7" x.157 (4mm) Steel Scaler Needle $1.00 TX00119 5" x.125 Beryllium Cooper Needle $2.42 TX00120 7" x.125 Beryllium Cooper Needle $3.01 Spare Parts List Available at USA-Airtools.com 16 USA-AIRTOOLS.COM

17 LONG REACH SCALER Long Reach/Push Throttle Chisel Scaler This tool hits twice as hard as a regular scaler. It has a 2" stroke on the piston compared to 1-1/4" on the TX1B. Proudly made in the USA World class value pricing Quality equal to or better than competitively made scalers Tool Applications Long Reach Scaler Tile and non-skid removal Grease and paint removal Glue and resin removal Barnacle and heavy scale removal Push Throttle Scaler For use in foundry casting cleaning Part No. Description Stroke Length Weight (lb) Bore Inlet Min. Hose Size Air Cons (cfm) BPM Price TX2LRCS Long Reach Scaler 2 48 or 60 14 15/16 1/2 1/2 10-12 3400 $555 TX2PTCS Push Throttle Scaler 2 17-1/2" 6 15/16 1/4 3/8 10-12 3400 $395 TX2LR-RK Long Reach Scaler Repair Kit $93.71 Chisels and Scraper Blades TX20000 Chisel - 3" x 9" Flat Chisel $33.64 TX20029 Chisel - 3/4" x 5-1/2" Flat Chisel $13.07 TX20030 Chisel - 1-3/8" x 5" Flat Chisel $13.98 TX20031 Chisel - 1-3/8" x 5" Spoon Chisel $13.98 TX20100 Blade Holder Only $69.76 TX20104 Scraper Blade - 4" with Holder $83.53 TX20108 Scraper Blade - 8" with Holder $86.03 TX20112 Scraper Blade - 12" with Holder $88.54 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 17

18 PISTON TYPE SCALERS S1 Single Piston Scaler Rugged steel body Lever operated snap handle Optional brass air cock valve available Variety of pistons available Proudly made in USA Tool Applications Removing rust and paint Removing cement from steel Roughing cement Used in more compact areas where the T3 will not fit T3 Triple Piston Scaler Rugged steel body Lever operated snap handle Optional brass air cock valve available Variety of pistons available Proudly made in USA Tool Applications Removing rust and paint Removing cement from steel Roughing cement Piston scalers can be used in areas that standard model scalers will not fit Part No. Description Stroke Length Weight (lb) Bore Inlet (NPT) BPM Min Hose Size Air Cons (cfm) S1 Single Piston Scaler 13/16 9 5 1 3/8 4000 3/8 9 $420.00 S1-AC Single Piston Scaler with Air 13/16 9 5 1 3/8 4000 3/8 9 $420.00 Cock Handle T3 Triple Piston Scaler 13/16 11 9 1 3/8 5200 3/8 15 $550.00 T3-AC Triple Piston Scaler with Air Cock Handle 13/16 11 9 1 3/8 5200 3/8 15 $550.00 Replacement Pistons TX00146 Standard Steel Piston $47.62 TX00147 Standard Steel (2" longer than standard) $53.01 TX00149 Carbide Tipped Piston - Chisel Point $170.34 TX00150 Carbide Tipped Piston - Star Point $170.34 TX00151 Rexalloy: Solid Cobalt Alloy Pistons - Star Point $170.34 TX00155 Rexalloy: Solid Cobalt Alloy Pistons - Chisel Point $170.34 Repair Kits S1RK S1 Single Piston Scaler Repair Kit $23.59 T3RK T3 Triple Piston Scaler Repair Kit $189.78 Price Spare Parts List Available at USA-Airtools.com 18 USA-AIRTOOLS.COM

19 AIR SCRIBE TXAS1 Air Scribe The Texas Pneumatic Air Scribe is lightweight and easy to operate. It is designed to write on a variety of materials such as steel, glass, plastic, and wood. It can be used for deburring, trimming and removing broken studs on small applications. Made in USA Comes in convenient carrying case Equipped with a flexible hose and filter with 3/8" NPT fitting Will write on a variety of materials Carbide-tipped stylus for longer life Hardened piston for longer life Steel housing for durability Adjustable throttle for a variety of jobs Vibrating tip for all uses Description Part No. Weight (oz) Air Cons. (cfm) Air Inlet Hose Size Length Min. Suppy Air Hose Size Price Air Scribe with Carrying Case TXAS1 13 <1 1/4 1/4 5 3/8 $265.00 Accessories TXAS1RK Air Scribe Repair Kit $23.59 TX21019 Stylus Tip $14.27 TX21020R Round Nose Chisel $11.63 TX21020F 1/4" Flat Chisel $8.96 TX21020B Blank Chisel $7.15 TX21020M Moil Point $11.63 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 19

20 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINERS FOR CHIPPING HAMMERS PART NO DESCRIPTION 1090 Easily adapted to light chipping and scaling hammers. Retainer MUST be removed fro hammer barrel to change tool. To change tool, pull #1094 lock spring entirely out of slot in retainer and slide retainer off barrel. 1190 For use where frequent change of tools is NOT required. This retainer must be removed from hammer barrel to change tools. To remove retainer from hammer barrel, pull #1194 lock spring entirely out of slot in retainer and slide retainer off barrel. PRICE $52.53 $41.35 1190R For use with tool furnished with ROUND collar. Similar to #1190 series retainer. This retainer must be removed from hammer barrel to change tool. To remove retainer from hammer barrel, pull #1194 lock spring entirely out of slot in retainer and slide retainer off barrel. #1199 rubber bumper is recommended to cushion bottom of retainer housing. $41.35 1191 For use where frequent tool change is necessary. It is NOT necessary to remove retainer from hammer barrel to change tools. Tool changes quickly by lifting end of flat spring on outside of retainer to release lock pin, rotate tool 1/4 turn, remove tool. Insert new tool and rotate 1/4 turn until lock pin snaps in place. $81.84 1192 For instant change of tools on production work in mills, foundries, or factories. It is NOT necessary to remove retainer from hammer barrel, or to lift flat spring to change tools. Tools changed quickly simply by pushing upward into hammer. Round shank: turn tool approx. 1/4 turn. Hex shank: Hold tool, turn retainer approx. 1/4 turn. After tool is unlocked it can be removed through bottom of retainer. Reverse procedure when inserting new tool. 1193 Oval Collar Threaded Barrel For use with threaded barrel chipping hammers when frequent tool change is involved. Operation similar to #1191 quick change retainer. Held onto threaded barrel by #1191-8 pressure spring. 1195 Designed for use with chipping hammer. Either standard width or wide blade chisel with round collar can be used. Retainer must be removed from hammer barrel to change tool. #1194 lock spring holds retainer on hammer barrel. #1199 rubber bumper cushions tool against bottom of retainer body. 1196 1196 Quick Change Retainer is designed for changing of tool without removal of retainer from hammer barrel $61.22 $78.75 $80.56 $81.84 Call our office or visit our web site USA-Airtools.com for the specific size of retainer for your tool. Spare Parts List Available at USA-Airtools.com 20 USA-AIRTOOLS.COM

21 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINERS FOR CHIPPING HAMMERS & RIVET BUSTERS PART NO DESCRIPTION 1197 The 1197 retainer was designed for changing the tool without removal of retainer from the hammer barrel. The tool is changed simply by pushing the tool upwards in the hammer and turning 1/4 turn and then downwards. Insert tool from the bottom of the retainer and turn 1/4 turn to look the tool in place. Steel segments hold the retainer on the barrel, and its design is OSHA approved for maximum safety. 1198 Designed special for chipping hammers with threaded barrel. This retainer must be removed from hammer barrel to change tools. Retainer threads onto barrel and is held in place by #1191-8 pressure spring. #1199 rubber bumper is recommended to cushion bottom of retainer housing. For use with ROUND COLLAR tools only. Maximum blade width is 1. Wider width than 1, use 1198W for up to 1-1/8 chisels PRICE $106.43 $69.10 1291 Model 1291 Deluxe Quick change retainer is designed for rapid changing of tools without removal of retainer from hammer barrel. Tool changes quickly by pulling back sleeve to unlock tool in retainer. Releasing sleeve back to normal position locks tool in retainer. Any width blade chisels can be used with this retainer, as well as both round and oval collar tools. 1851 Retainer engineered to fit both threaded or grooved barrel. Held on barrel with #2194 lock spring. Reinforced body construction assures long service life. 2190 Characteristic of Arrow Tools quality construction, this retainer is built of high grade steel hardened throughout for reliable performance and long service when used with 81X or 11X rivet buster. Lock spring #2194 used to hold retainer on hammer barrel. 160 Model 160 retainer is designed to fit standard riveting hammer and is to be used with rivet sets. #194 lock spring is used to hold retainer on hammer barrel and #1194 us used to hold rivet set in retainer. 190 Extra heavy duty retainer designed to withstand shock and give long dependable service when used with rivet hammers. Lock spring #194 used to hold retainer on hammer barrel. $85.85 $99.97 $76.25 $72.78 $71.00 Call our office or visit our web site USA-Airtools.com for the specific size of retainer for your tool. Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 21

22 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINER ACCESSORIES FOR CHIPPING HAMMERS & RIVET BUSTERS PART NO DESCRIPTION PRICE 1501 Upper Sleeve 190 Retainer. Used with over size 1-11/32 dia. Bore and 1500 tool 1502 Upper Sleeve 190 Retainer. Used with standard 1-7/32 dia. Bore and 1500 tool $10.19 $10.19 1503 Upper Sleeve 190 Retainer. Parker Taper bore and 1500 tool $14.79 2001 Upper Sleeve 190 Retainer. Straight bore and 2000 tool $10.21 2002 Upper Sleeve 2190 and 1851 Retainer. Parker taper bore and 2000 tool $16.25 2101 Upper Sleeve 2190 and 1851 Retainer. Standard bore and 2000 tool $11.83 2101-15 Upper Sleeve 2190 and 1851 Retainer. Standard bore and 1500 tool $11.83 2101-SHORT Jumbo Upper Sleeve short $11.83 1504 Lower Sleeve 190 Retainer. Used with 1500 tool $13.09 1504-S Lower Sleeve 190 Retainer. Split sleeve used with 1500 tool $13.81 2003 Lower Sleeve 190 Retainer. Used with 2000 tool $13.09 2003S Lower Sleeve 190 Retainer. Split sleeve used with 2000 tool $13.81 2103 Lower Sleeve 2190 & 1851 Retainer. Used with 2000 tool $14.73 2103S Lower Sleeve 2190 & 1851 Retainer. Split sleeve used with 2000 tool $15.51 2103-15 Lower Sleeve 2190 & 1851 Retainer. Used with 1500 tool $14.73 2103-15S Lower Sleeve 2190 & 1851 Retainer. Split sleeve used with 1500 tool $13.42 1505 Rubber Bumper used with lower sleeve #1504, 2003, 192 $2.76 2104 Rubber Bumper used with 2103 lower sleeve black $2.90 2104-2 Rubber Bumper used with 2103 lower sleeve gray heavy duty $3.24 2104-3 Rubber Bumper used with 2103 lower sleeve red plastic heavy duty $4.89 2104-4 Rubber Bumper used with 2103 lower sleeve orange urethane $4.27 heavy duty 1094 Lock Spring used with 1090 retainer $1.80 1194 Lock Spring used with 1190, 1191, 1192, and 1195 retainer $1.80 194 Lock Spring used with 190 retainer $1.80 2194 Lock Spring used with 2190 and 1851 retainer $1.80 Spare Parts List Available at USA-Airtools.com 22 USA-AIRTOOLS.COM

23 CHIPPING HAMMER & RIVET BUSTER ACCESSORIES ARROW RETAINER ACCESSORIES FOR CHIPPING HAMMERS & RIVET BUSTERS PART NO DESCRIPTION PRICE 1191-3 Rotating Insert used with 1191 and 119e retainer $14.99 1191-7 Rotating Insert used with 1192 and 1197 retainer $15.21 1197-3 Rotating Insert used with 1197 retainer $15.20 1191-4 Insert Spring used with 1191, 1192, 1193, and 1197 retainer $1.97 1191-2 Flat Spring & Pin used with 1191 and 1193 retainer $6.81 1191-6 Flat Spring & Pin used with 1192 and 1197 retainer $6.81 1191-8 Pressure Spring used with 1198 and 1193 retainer $6.97 1199 Rubber Bumper Used with 1195, 1195R and 1198 Retainer. Note. Conversion kit #2035 converts riveting hammer to rivet buster so jumbo tools can be used $2.36 1197-5 Steel Segment pkg of 8 for use with 1197 retainer $7.57 Spare Parts List Available at USA-Airtools.com USA-AIRTOOLS.COM 23

24 FILTER-REGULATOR-LUBRICATOR SYSTEMS Portable Filter, Regulator, Lubricator Systems Protected by a heavy-duty galvanized steel cage Galvanized protective cage to prevent rust in offshore/marine environments Pre-filter Y strainer to trap large debris and sludge extends the life of automatic drain on filter unit Particulate filter to remove harmful oil/water condensate, pipe scale, dirt and rust from the compressed air supply Regulator with gauge for precise PSI control Lubricator that maintains the same air/oil ratio regardless of variations in air flow to reduce equipment maintenance and prolong tool or hoist life. Part No. Description Max Flow (cfm) TX1/2"MF-FRL Unit assembled in galvanized cage with 2 prong crowsfoot to crowsfoot. Y Strainer, F384FW particulate filter with automatic drain, R374G regulator with gauge and L484W lubricator TX3/4"HF-FRL Unit assembled in galvanized cage with 2 prong crowsfoot to crowsfoot. Y Strainer, F329-06FW particulate filter with automatic drain, R376G regulator with gauge and 4106 lubricator TX1"HF-FRL Unit assembled in galvanized cage with 2 prong crowsfoot to crowsfoot. Y Strainer F329-08FW particulate filter with automatic drain R398G regulator with gauge and 4108W lubricator TX1-1/2"HF-FRL Unit assembled in galvanized cage with 4 prong crowsfoot to crowsfoot. Y strainer F329-12FW particulate filter with automatic drain, R3912G regulator with gauge and 4112 lubricator Filter Regulator Lubricator Assembly Mounted In-Line Sold with or without protective cages All unites come assembled with a Y-Strainer and metal bowls FW - Internal Float Drain Part No Particulate Filter Regulator Lubricator Max Flow (cfm) FW Internal Float Drain G With Gauge W With Sight Disk NPT Size Price 142 1/2 $658.75 175 3/4 $728.07 175 1 $762.75 175 1-1/2 $658.75 NPT 1FRL1/2 F384-FW R374G L484W 165 1/2 $335.09 2FRL3/4 F329-06FW R376G 4106W 175 3/4 $409.70 3FRL1 F329-08FW R378G 4108W 175 1 Call 4FRL1.5 F329-12FW R3912G 4112W 175 1-1/2 $723.25 Price Spare Parts List Available at USA-Airtools.com 24 USA-AIRTOOLS.COM

25 FILTER-REGULATOR-LUBRICATOR SYSTEMS Tri-Stage: Filtering Systems Extreme Clean/Dry Air Removal of water, oil, aerosols and sub-micron particles from the compressed air supply F - Internal Float Drain T - External Float Drain W - With Sight Disk Part No. F-3 Particulate Filter F-4 Oil Removing Filter F-5 Coalescing Filter Max Flow (cmf) NPT Price TSF1/2 F384W F484W F584W 110 1/2 $538.64 TSF3/4 F329-06FW F405-06FW F505-06FW 110 3/4 $716.98 TSF1 F329-08FW F405-08FW F505-08FW 150 1 $716.98 TSF1-1/2 F329-12FW F408-12FW F508-12FW 310 1-1/2 $1,447.13 TSF1-1/2A F3N1-12TW F418-12FW F518-12FW 515 1-1/2 $3,107.72 TSF2 F3N1-16TW F428-16TW F528-16TW 840 2 Call TSF3 F3AN2M-24DF F4AN2M-24DF F5AN2M-24DF 1100 3 $8,310.87 Paint Spray - Air Filtering / Air Drying Rental Ready, User Ready Pre-filter Y strainer to trap large debris and sludge. Extends the life of the automatic float drain on the particulate filter Particulate filter to remove harmful oil/water condensation, pipe scale, dirt and rust from the compressed air supply which extends the life of the coalescing filter element Regulator with gauge for precise PSI control to the spray gun Third stage coalescing filter brings high levels of filtration of oil, aerosols, and sub-micron particles, which extends the life of the desiccant in the desiccant dryer. Desiccant Dryer where the air is distributed uniformly through the fill desiccant bed and then dry air exits at the bottom of the desiccant bed into the intake tube and out the outlet port of the unit to the spray gun. Part No. Description Max Price Flow (cfm) TX1/2"FRDD Y-Strainer, F384FW Particulate Filter, F584FW Coalescing 25 Call Filter, R374G Regulator and D10-04SL Desiccant Dryer TX3/4"FRDD Y-Strainer, F329-06FW Particulate Filter, F505-06FW Coalescing Filter, R376G Regulator, and D25-06 Desiccant Dryer 50 $1,277.52 USA-AIRTOOLS.COM 25

26 Components Listing Y Strainer Part No NPT Size Description Price Y-003 1/2 20x20 Mesh CALL Y-004 3/4 20x20 Mesh $31.24 Y-005 1 20x20 Mesh CALL Y-006 1-1/4 20x20 Mesh CALL Y-007 1-1/2 20x20 Mesh CALL Y-008 2 20x20 Mesh CALL Particulate Filter Part No. Pipe Size Max Flow (cfm) Bowl Capacity (oz) Price F384-FW 1/2 165 20 $128.94 F329-06FW 3/4 260 29 $171.08 F329-08FW 1 300 29 $171.08 F329-12FW 1-1/2 425 29 $290.69 F358HF-12FW 1-1/2 550 50 CALL F3N1-12TW 1-1/2 910 100 CALL F3N1-16TW 2 910 100 $716.48 F3NHF-25TW 3 1300 200 CALL F3AN2M-24TW 3 2760 ASME CALL F3X3-32FW 4 (flanged) 4000 ASME CALL F3X4-48FW 6 (flanged) 5800 ASME CALL Regulator Part No Pipe Size Max Flow (cfm) Price R374G 1/2 215 $76.48 R376G 3/4 220 $76.48 R398G 1 600 $144.66 R3912G 1-1/2 700 $159.00 Lubricator Part No Pipe Size Max Flow (cfm) Bowl Capacity (oz) Price L484W 1/2 142 20 $116.73 4106W 3/4 175 29 $130.45 4108W 1 175 29 $130.45 4112W 1-1/2 175 29 $232.20 26 USA-AIRTOOLS.COM

27 Coalescing Filters Part No Pipe Size Max Flow (cfm) Price F584-FW 1/2 90 $217.36 F505-06FW 3/4 150 $277.86 F505-08FW 1 150 $264.65 F508-12FW 1-1/2 310 CALL F510-12TW 1-1/2 415 CALL F518-12TW 1-12 515 CALL F510-16TW 2 415 CALL F5AN2M-24DF 3" ASME 1360 CALL F5AX2L-32DF 4" ASME flanged 1750 CALL F5AX3L-48DF 6" ASME flanged 2400 CALL Oil-Removing Filter Part No Pipe Size Max Flow (cfm) Price F484FW 1/2 116 $217.36 F405-06FW 3/4 185 $261.14 F405-08FW 1 300 $274.20 F408-12W 1-1/2 400 $1,447.13 F418-12TW 1-1/2 590 CALL F2AN2M-24DF 3" ASME 1700 CALL Desiccant Dryers Part No Pipe Size Max Flow (cfm) Price D10-04XL 1/2 15-25 CALL D25-06 3/4 25-50 $776.12 DFD-10 1/4" MPTx1/4" FPT 15 2 Pack Disposable Desiccant Dryer $23.40 USA-AIRTOOLS.COM 27

28 In-Line Filter Lubricators One of the most common repairs an air tool undergoes is disassembly to clean foreign material out of the valve assembly. In-Line Filter Lubricators help prevent this from happening. The 40 micron filter can easily be cleaned or replaced. These are heavy-duty in-line lubricators to be installed 6-8 feet from tool. Designed for use with tools being used too far away from compressor to be lubricated by a permanently mounted unit. Lubricator filter unit is an integral unit Accepts a 40 micron bronze filter Reduces down time Prevents costly repairs Extends air tool life Casting design prevents breakage where a nipple has been used to connect filter to lubricator Adjustable metering valve Sight disk in housing to visually inspect oil level These lubricators can be used on everything from an air scribe to a paving breaker. Part No. Description Capacity (Fl Oz) Hose Barb Pipe Size Max. Working Pressure Oil Wt. Req. Air Flow Capacity at 70psi TX0L-F In-Line Filter Lubricator 1.4 1/2" NPT 500 10 WT 30 $57.80 TX1L-F In-Line Filter Lubricator 3.7 3/4" NPT 260 10 WT 70 $64.04 TX2L-F In-Line Filter Lubricator 11.0 3/4" NPT 300 10 WT 70 $71.66 TX1/4L In-Line Lubricator 1/4" NPT 10 WT $28.88 TX0L In-Line Lubricator 1.4 1/2" NPT 260 10 WT 30 $40.59 TX1L In-Line Lubricator 3.7 3/4" NPT 260 10 WT 70 $43.39 TX2L In-Line Lubricator 11.0 3/4"NPT 300 10 WT 70 $53.72 TX3L In-Line Lubricator 16.0 1" NPT 250 10 WT 150 $64.04 TX0L-PR TX-0L w/ Presure Relief Cap 1.4 1/2" NPT 500 10 WT 30 $44.29 TX0L-F-PR TX-0L-F w/ Pressure Relief Cap 1.4 1/2" NPT 500 10 WT 30 $65.87 TX1L-PR TX-1L w/ Pressure Relief Cap 3.7 3/4" NPT 260 10 WT 70 $49.97 TX2L-PR TX-2L w/ Pressure Relief Cap 11.0 3/4" NPT 300 10 WT 70 $61.32 TX3L-PR TX-3L w/ Pressure Relief Cap 16.0 1" NPT 250 10 WT 150 $72.68 TX2L-CF Constant Feed TX-2L Lubricator 11.0 3/4" NPT 300 10 WT 70 $72.39 TX3L-CF Constant Feed TX-3L Lubricator 16.0 1" NPT 250 10 WT 150 $82.73 Price Spare Parts List Available at USA-Airtools.com 28 USA-AIRTOOLS.COM

29 Hose Whip Assemblies with Lubricators All USA made components 300# working pressure Absolute oil resistance Solid band clamps Equipped with spring guard at tool end Standard 6' length Part No. Chicago Coupling Lubricator Hose Connector Price TX1HW Crows Foot TX-0L 6' 300psi 1/2" ID 1/4" MPT $54.11 TX2HW Crows Foot TX-0L 6' 300psi 1/2" ID 3/8" MPT $54.11 TX3HW Crows Foot TX-0L 6' 300psi 1/2" ID 1/2" MPT $54.11 TX4HW Crows Foot TX-0L 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $67.05 TX4HW1/2 Crows Foot TX-0L 6' 300psi 1/2" ID 1/2" Swivel $70.40 TX5HW Crows Foot TX-1L 6' 300psi 1/2" ID 3/8" MPT $61.32 TX6HW Crows Foot TX-1L 6' 300psi 1/2" ID 1/2" MPT $61.32 TX7HW Crows Foot TX-1L 6' 300psi 1/2" ID 3/4" MPT $61.32 TX8HW Crows Foot TX-1L 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $74.67 TX8HW1/2 Crows Foot TX-1L 6' 300psi 1/2" ID 1/2" Swivel $74.67 TX9HW Crows Foot TX-1L 6' 300psi 1/2" ID Crows Foot $61.32 TX10HW Crows Foot TX-2L 6' 300psi 1/2" ID Crows Foot $74.67 TX11HW Crows Foot TX-2L 6' 300psi 1/2" ID 1/2" MPT $74.67 TX12HW Crows Foot TX-2L 6' 300psi 3/4" ID 3/4" MPT $71.38 TX12HW1/2 Crows Foot TX-2L 6' 300psi 3/4" ID 1/2" MPT $71.38 TX13HW Crows Foot TX-2L 6' 300psi 3/4" ID 1" MPT $74.78 TX14HW Crows Foot TX-2L 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $74.78 TX15HW Crows Foot TX-3L 6' 300psi 3/4" ID Crows Foot $109.01 TX16HW Crows Foot TX-3L 6' 300psi 3/4" ID 3/4" MPT $109.01 TX17HW Crows Foot TX-3L 6' 300psi 3/4" ID 1" MPT $109.01 Hydraulic Hose Whip Assemblies TX3HW-HYD TX-0L 6' 1/2" ID 1/2" MPT $69.85 TX4HW-HYD TX-0L 6' 1/2" ID TX-03000 Swivel $91.70 TX6HW-HYD TX-1L 6' 1/2" ID 1/2" MPT $74.67 TX11HW-HYD TX-2L 6' 1/2" ID 1/2" MPT $90.85 TX122000-1212 6' 1/2" ID 1/2" MPT both ends $41.90 USA-AIRTOOLS.COM 29

30 Hose Whip Assemblies with Lubricators All USA made components 300# working pressure Absolute oil resistance Solid band clamps Equipped with spring guard at tool end Standard 6' length Part No. Chicago Coupling Lubricator Hose Connector Price Hose Whip Assemblies with Combination In-Line Filter Lubricator TX1HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/4" MPT $72.68 TX2HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 3/8" MPT $72.68 TX3HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/2" MPT $72.68 TX4HW-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $84.03 TX4HW1/2-F Crows Foot TX-0L-F 6' 300psi 1/2" ID 1/2" MPT Swivel $84.03 TX5HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 3/8" MPT $73.82 TX6HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 1/2" MPT $73.82 TX7HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 3/4" MPT $73.82 TX8HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 7/8"-24 Thread Hose Swivel $87.44 TX8HW1/2-F Crows Foot TX-1L-F 6' 300psi 1/2" ID 1/2" MPT Swivel $87.44 TX9HW-F Crows Foot TX-1L-F 6' 300psi 1/2" ID Crows Foot $72.68 Steel Hose Ends for Use With Combination In-Line Filter Lubricator Hose Whip Assemblies TX00408 1/2" MPT TX-0L-F 1/2" ID 1/2" Barb $9.50 TX00410 1/2" MPT TX-0L-F 3/4" ID 3/4" Barb $10.45 TX00409 3/4" MPT TX-1L-F 1/2" ID 1/2" Barb $10.45 TX00411 3/4" MPT TX-1L-F 3/4" ID 3/4" Barb $9.56 30 USA-AIRTOOLS.COM

31 Hose Swivels Part No. Description Price TX01087 7/8"-24 Thd x 1/2" Hose Barb $18.94 TX00986 7/8"-20 Thd x 1/2" Hose Barb $18.94 TX00988 1/2" NPT Thd x 1/2" Hose Barb $20.92 TX00407S 3/8" x 1/2" Hose Barb - Straight Swivel $11.43 TX00988 1/2" NPT Pipe Thd x 1/2" Hose Barb $20.92 TX03000 7/8"-24 Thd x 3/8" Female NPT End $25.60 TX03001 7/8"-20 Thd x 3/8" FPT $25.60 TX03988 1/2" NPT Pipe Thd x 3/8" FPT $25.60 TX01086 7/8"-24 Thd x 3/8" MPT $18.94 TX01085 7/8"-20 Thd x 3/8" Male NPT End $18.94 Quick Disconnect Couplings TXB2S2-S 1/4" Steel Plug x 1/4" Hose Barb $2.28 TXB2M2-S 1/4" Steel Plug x 1/4" Male NPT $1.30 TXB2F2-S 1/4" Steel Plug x 1/4" Female NPT $1.37 TX2CS2-B 1/4" Brass Coupler x 1/4" Hose Barb $7.02 TX2CM2-B 1/4" Brass Coupler x 1/4" Male NPT $5.74 TX2CF2-B 1/4" Brass Coupler x 1/4" Female NPT $5.46 TXB2S3-S 1/4" Steel Plug x 3/8" Hose Barb $2.37 TXB2M3-S 1/4" Steel Plug x 3/8" Male NPT $2.10 TXB2F3-S 1/4" Steel Plug x 3/8" Female NPT $2.93 TX2CS3-B 1/4" Brass Coupler x 3/8" Hose Barb $6.90 TX2CM3-B 1/4" Brass Coupler x 3/8" Male NPT $6.29 TX2CF3-B 1/4" Brass Coupler x 3/8" Female NPT $6.32 TX2BM2-B 1/4" EZ Quick Connect Brass Coupler x 1/4" MPT $9.48 TX2BM3-B 1/4" EZ Quick Disconnect Brass Coupler x 3/8" MPT $9.60 USA-AIRTOOLS.COM 31

32 Screened Inlet Bushings Brass screens trap debris to prolong tool life Inlet bushing are heat-treated and black-oxided Protects against corrosive damage and improves performance Part No Description Price TX00989 1/4" MPT X 1/4" FPT $3.48 TX00990 1/4" MPT X 3/8" FPT $3.48 TX00991 3/8" MPT X 1/4" FPT $3.48 TX00992 3/8" MPT X 3/8" FPT $3.48 TX00993 3/8" MPT X 1/2" FPT $4.13 TX00994 1/2" MPT X 3/8" FPT $4.13 TX00995 1/2" MPT X 1/2" FPT $3.48 TX00987 7/8"-20 Thd Permanent Bushing x 3/8" MPT $3.48 TX01008 7/8"-24 Thd Permanent Bushing x 3/8" MPT $3.82 In-Line Air Tool Filter Standard 40 micron which ensures minimum pressure drops Provides particle-free air to tools Available in 20-90 micron filtration on special order Lightweight aluminum housing Part No. Description NPTF Size Length Hex Price TX9071 1/8" FPT (In) x 1/8" MPT (Out) 1/8 2-3/16 3/4 $7.46 TX9072 1/4" FPT (In) x 1/4" MPT (Out) 1/4" 2-5/16 3/4 $10.09 TX9074 1/2" Female Thread - Both Ends 1/2 3-1/4 1-1/2 $23.85 AirPostDrivers.com TX9074M 1/2" Female Thread (In) x 1/2" Male Thread (Out) 1/2 3-1/4 1-1/2 $25.45 TX9076 3/4" Female Thread - Both Ends 3/4 3-1/4 1-1/2 $27.13 TX9076M 3/4" Female Thread (In) x 3/4" Male Thread (Out) 3/4 3-1/4 1-1/2 $28.80 32 USA-AIRTOOLS.COM