Your energy solutions to reduce pollution and fuel consumption 2013 - ENG v1.2
YOUR ENERGY SITUATION You use energy systems that consume: Diesel, Light oil, IFO, HFO, Mazut, Bunker, Vegetable oil, Animal fat oil. You want to: Reduce your carbon pollution Reduce your fuel consumption Reduce operating costs WE HAVE THE SOLUTION YOU NEED 2
THE SOLUTION The solution to meet your needs is based on the following products: 1. Cyntech - ηemulsifier a. Pre-Treatment and Hydrodynamic cracking of the base fuel to optimize combustion b. ηemulsion (nano Emulsion) with ultrapure water and additives to further reduce emissions 2. Cynergas Generator Generation of Cynergas to offset fuel use and increase base fuel combustion to reduce harmful emissions 3. Highly pressurized cyclonic nozzle Optimal fogging of the emulsion during its injection into the engine generators, steam boilers, turbines, marine engines and vehicles. BEFORE AFTER 4. Hydrodynamic cracking Cavitational treatment of liquid hydrocarbon such as crude oil, fuel oil, bitumen, and various biofuels, reduces viscosity and increases both yield and temperature BEFORE AFTER EACH PRODUCT CAN BE USED SEPARATELY OR IN COMBINATION 3
YOUR BENEFITS The benefits you will get are: Reduction of pollution 100% Up to 28% NOx reduction Up to 60% PM reduction Up to 80% smoke reduction Reduction of fuel consumption By 8 to 15% 100% Return on investment 80% < 18 months in many situations 60% 40% 20% 40% 60% 80% 60% 40% 20% 0% 72% 72% 60% 40% 20% PM PM10 Nox Smokes Diesel Emulsion 20% 0% PM PM10 Nox Smokes 4
OUR QUALITY REQUIREMENTS OF OUR PRODUCTS AND SERVICES To meet the high quality requirements of our customers: We control the entire value chain of our products, from the research and international patent filing to their production in our factories Our products meet the international standards of certification and safety We assure our after-sales service directly or through local approved and certified partners. 5
APPLICATION FIELDS The application fields are (among others): Boilers, ICE generator set, turbines from 1MW, Fuel power plants, Marine and vehicles engines. The industries involved in energy efficiency are (among others): Energy and heat producers, maritime and road transportation companies, Cement plants, Glass manufacturers, Paper mills, and more. A few application cases are described below. 6
APPLICATION CASE: 180 MW HFO TURBINE ISSUE With ever-increasing global energy demand and a relatively limited supply of fuel available, power producers are seeking alternative fuel sources to generate power, including crude and residual oils, also commonly named heavy fuel oils. Most of these are contaminated with heavy metals and require precombustion fuel treatment as well as frequent turbine cleaning to remove ash and recover lost performance. SOLUTION Cyntech ηemulsion reduces the emission and consumption while protecting blades and reducing the frequency of turbine cleaning. Your turbine units run reliably while vastly reducing power-generation costs. Our approach prevents hot-path corrosion, ash fouling, and other detrimental effects associated with using heavy fuel oil (HFO) and crude oil. FACT: 180 MW HFO Turbine Fuel saving up to 12.7% Smoke reduction up to 80% NOx reduction up to 28% Self cleaning of blades Nanostructure surface protection of blades Large Cynergi HFO Emulsifier, up to 40 ton/h on demand Cyntech ηemulsion 7
APPLICATION CASE: ICE GENERATOR SET ISSUE Due to the prolonged use of the engines in Diesel Generators, accumulation of carbon deposits and incomplete fuel combustion creates significant waste and lubricating oil contamination. This results in an estimated 20 percent increase in wasted fuel costs. SOLUTION Cyntech ηemulsion plus Cynergas, increase the efficiency of Diesel Generators dramatically. Our optimized combustion reaction actually cleans the engine while in normal use reducing fuel consumption, increasing performances and reducing maintenance. FACT: Fuel saving up to 14% Smoke reduction up to 80% NOx reduction up to 28% Lubricating oil life increased up 30% Engine self cleans from complete combustion Less engine maintenance Photographs of the fuel plunger, taken before tests with Cyntech ηemulsion and after. 8
APPLICATION CASE: STEAM BOILER SOLUTION Cynergi fuel pre-treatment and specialty Cyntech TM additives, focus on improving the operational efficiency of steam boilers, industrial boilers and process systems by offering readymade solutions to reduce fuel consumption and emissions by increasing combustion efficiency and mitigating ash formation, corrosion and smokes production. Our proprietary Cyntech ηemulsion with up to 32% ultrapure water, optimizes combustion, decrease the flame temperature peak to reduce NOx, breaking up the particles of fuel and generates H2 and O2. with resulting in reduced excess air need and eliminating supplemental steam injection. Our solution is suitable for medium and large boilers using the following fuels:: Heavy Fuel Oil D#6 Mazout Fuel oil D#4 Gas oil D#2 Our solution can treat up to 50 tons/hour of fuel 9
APPLICATION CASE: TRANSPORTATION AT THE PUMP Specialty Cyntech additives Water Fuel Cyntech - ηemulsifier IMPLEMENTATION The Cyntech ηemulsion is generated when filling the tank of the boat or bus with Cyntech - ηemulsifier. 10
APPLICATION CASE: MARITIME ON BOARD PROBLEMATIQUE International Marine Organization (IMO) Tier III emissions controls for nitrogen oxides (NOx) ship emissions, go into effect beginning 2016. NOx Emissions from diesel marine engines must be reduced by 80% over Tier I levels. To meet these requirements, SOLUTION Cyntech ηemulsion plus Cynergas, increase the efficiency of diesel marine engines dramatically and today allows them to meet the IMO Tier III requirements. Our optimized combustion reaction actually cleans the engine while in normal use reducing fuel consumption, increasing performances and reducing maintenance. FACT: Fuel saving up to 10.3% Smoke reduction up to 80% NOx reduction up to 28% Lubricating oil life increased up 30% Engine self cleans from complete combustion Less engine maintenance 11
APPLICATION CASE: MARITIME ON BOARD IMPLEMENTATION Cyntech ηemulsion plus Cynergas are provided on demand with Cyntech - ηemulsifier and Cynergas Generator specially designed to meet the ship s space constraints. HFO + water ηemulsion Cynergas 12
F.A.Q. How much Oil Consumption can I eliminate with this process? From 8 up to 15%: a 25 MWh boiler burning 7.8 Tons of HFO/Mazut per hour, would save 1.17 Tons/h of Oil, with Cyntech ηemulsion and cavitation treatment. As already tested. How does the process work? Re-Engineered Water is converted in Cynergas on-site and Cyntech Fuel ηemulsion, these are used directly in the ICE Engines or mixed with by Cyclone nozzle in the Burners. Will it damage my engine or require additional maintenance? No. The additive will actually clean your engine and reduce wear on your system, longer oil life and lower maintenance. Who will install and service the machinery? Our worldwide service network, will provide all support and services. If I save 15% of my fuel use, after machinery and additive how much savings is left for me? An estimated 8/10% of the total amount spent on Oil for that same Engine/Boiler before. How much will this process reduce my Carbon Emissions? CO2 reduction of the same % of fuel saving CO reduction up to 40% NOx reduction up to 28% Smokes reductions up to 80% 13
F.A.Q. Can I sell the Carbon Emission Credit on the open market? YES Depending on local law. Can I easily turn this system off and run my engine or boiler as normal? Yes, our systems can be bypassed. Is their any health or damage risk associated with this process? No, because the Cynergas and Cyntech ηemulsion are not stored but produced on demand. Is the Oxygen and Hydrogen enriched process a proven theory? YES this has been proven for over 50 years and until now, it has just been too expensive and unstable. Will my Engine or Boiler be shut down during installation? Yes, but this will be planned to be done during a regularly scheduled maintenance period. The Cynergas can also be used in ICE diesel generators? Yes, with excellent results, as Cynergas keeps it clean the combustion chambers, accelerates the rate of combustion, and increases the expansion of gases. What is the duration of a Cynergi gas generator and Cyntech emulsifier? Both was designed and built to have a life at least of 10 years. 14
CYNERGI IN BRIEF Cynergi Holding SA is a privately held company headquartered in Geneva, Switzerland. It has offices in the United States, Russia, Hong Kong, Dubai and two manufacturing sites in Italy, Legnano (Milan) and Genoa. Cynergi has proprietary technologies for improving the combustion using nano-emulsion (based on ultra-pure water and new generation special additives) and oxyhydrogen gas generation system used to reduce fuel consumption and harmful emissions to the environment. Emulsified fuels are mixtures of stable fuel products, water and Cynergi special additives. These fuels are emulsified using our own systems which reduce the size of the suspended particles to 100 nanometers. Cynergi holds patents rights for the most advanced emulsification technology, a new generation of additives and the most performant oxyhydrogen generator in the world. 15
MORE INFORMATION? CONTACT US! CYNERGI HOLDING S.A. 20, Chemin du Velours 1231 Conches Geneva Switzerland tel +41 22 7004061 ITI Srl Via Borzoli, 54c 16153 - Genova Italy tel +39 010 6143125 fax +39 010 4030227 CYNERGI Srl Via Brescia, 13 20025 Legnano(MI) Italy tel +39 0331 455717 fax +39 0331 541142 FARADAY ELECTROCHEM Ltd RM 1203, 12/F, Tower 3 China Hong Kong City, 33 Canton Road, Tsimshatsui, Kowloon Hong Kong tel +852 2126 7973 fax +852 2126 7976 www.cynergi.eu info@cynergi.eu 16